microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

i.MX arm64 device tree change for 5.17: 

- New SoC support: i.MX8 ULP.
 - New board support: i.MX8MM/MN based TQMa8Mx boards, iMX8MN BSH SMM S2,
   i.MX8 ULP EVK.
 - A series from Adam Ford to enable Camera and USB support for
   imx8mm-beacon device.
 - Add overlays for various serdes protocols on LS1028A QDS board using
   different PHY cards.
 - A series from Biwen Li to update LS1028A devices around RTC, flextimer
   and PWM support.
 - A series from Joakim Zhang to update ENET/FEC suppport on i.MX8M
   devices.
 - A couple of changes from Lucas Stach to update nitrogen8-som Ethernet
   PHY and I2C1 pad configuration.
 - A series from Martin Kepplinger to split out a shared imx8mq-librem5-r3
   dtsi for Librem5 devices.
 - Add cache descriptions for i.MX8 SoCs.
 - A series from Vladimir Oltean to update ls1028a-rdb device tree in
   order to share the DTS between Linux and U-Boot.
 - Random device addtion to various i.MX8 and LX2160A based devices.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmG9hc4UHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM5tZAf/chwOQUH6gwyc76vb2mzcMlYq4jPN
 vMxJZ6fJBf+QglOrGfSznl11SHNCGs+NBDvRkJt9JLKj1fHh/jUTZf5HCRnK62lH
 YB+w2XxlthufTPujkVXM10Dsx65Up67Mo3ZN5/3M6Fd+w/P8YUzPEL0jD2dm7CDM
 rKqe57kcJ6ZaJgASuPdVh51fwpmbCNOQZCRgg4Y+sunXzUVyjA/jOUaeQojg+m2e
 TTe80CH+3fugipWkotAa8ypxAJEbeEsPvVB711UxTY28rE2BqDkcPMyOiq+9HW+M
 AoqPeyeZffyJGwLblLCQTZzMEuWU9G87H+fda7b8sg7yFPvjefaj+4DbdA==
 =ARjB
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmHAm/QACgkQmmx57+YA
 GNk/4g/9GG9YYbOHzLDSit6I92eAwMhIxCE7ls2RrB/JBIi1v13qZ85YTPw9w1Bc
 klRXP46fI6dVl7R7t0Vt2zt5MpuNnKAMZsHQR+UvB/Zll4RC7n29NEpWyFW0i4Yv
 /G28Whmp1sQs8szrWwvOlxWMY3fSlQMKM4vrtJUU6Che5ec+PwgsRL2rWf5/cnJh
 E9HqQ3eJMyP8cdayRnlUCI8yWAdXHkeDQhl7Mu97eX4l7Ka2OkDseEZY+HgRmQSv
 Ee3X1EPxFHau9f842NtIwNz54Vdibfh+UHCzMeWOtDZXF8bhWVYp13joPNDM7AWM
 0oYMh966t/JuU4cPCQxed61C9Laxg42TkCbfuU7dC5pqKlCdSZSKOmLe7c6vw3Vf
 IGQwVgMh8/c3oJAbbPqWz+kfCg3O2KNzA3MnsQuizoLEwa5R4msqtk6FZ5uqR6d/
 RYL9eZKzeZWPXwth1KCEx+qLFWuRxC5cdK181Hc/Srm3bzNf/6vfCcReRCvlfOiE
 lU1kzHLOKtfUeWSEK3WFnWuTbU68NaH8rUZXpuTlV1kYEeBf/mD4aTOUW9hOh0v6
 EYwpk2QYPBcUUYR2KC6gfyJTTwihn3FR8+RiJR+VFjlhNrNHbrNmp3Vo19yjgu/Y
 brbFPEitQPnvXdrGAIfck9vHhO9VJ3xygo9SMowGsaRuFLunW/0=
 =zQ1O
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree change for 5.17:

- New SoC support: i.MX8 ULP.
- New board support: i.MX8MM/MN based TQMa8Mx boards, iMX8MN BSH SMM S2,
  i.MX8 ULP EVK.
- A series from Adam Ford to enable Camera and USB support for
  imx8mm-beacon device.
- Add overlays for various serdes protocols on LS1028A QDS board using
  different PHY cards.
- A series from Biwen Li to update LS1028A devices around RTC, flextimer
  and PWM support.
- A series from Joakim Zhang to update ENET/FEC suppport on i.MX8M
  devices.
- A couple of changes from Lucas Stach to update nitrogen8-som Ethernet
  PHY and I2C1 pad configuration.
- A series from Martin Kepplinger to split out a shared imx8mq-librem5-r3
  dtsi for Librem5 devices.
- Add cache descriptions for i.MX8 SoCs.
- A series from Vladimir Oltean to update ls1028a-rdb device tree in
  order to share the DTS between Linux and U-Boot.
- Random device addtion to various i.MX8 and LX2160A based devices.

* tag 'imx-dt64-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (56 commits)
  arm64: dts: imx8mp-evk: configure multiple queues on eqos
  arm64: dts: ls1028a-qds: add overlays for various serdes protocols
  arm64: dts: ls1028a-qds: enable lpuart1
  arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus
  arm64: dts: ls1028a-rdb: enable pwm0
  arm64: dts: ls1028a: add flextimer based pwm nodes
  arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source
  arm64: dts: ls1028a: Add PCIe EP nodes
  arm64: dts: lx2162a-qds: add interrupt line for RTC node
  arm64: dts: lx2162a-qds: support SD UHS-I and eMMC HS400 modes
  arm64: dts: lx2160a: enable usb3-lpm-capable for usb3 nodes
  arm64: dts: lx2160a-qds: Add mdio mux nodes
  arm64: dts: lx2160a: add optee-tz node
  arm64: dts: lx2160a-rdb: Add Inphi PHY node
  arm64: dts: imx8mm: don't assign PLL2 in SoC dtsi
  arm64: dts: nitrogen8-som: correct i2c1 pad-ctrl
  arm64: dts: nitrogen8-som: correct network PHY reset
  arm64: dts: imx8mn-bsh-smm-s2/pro: Add iMX8MN BSH SMM S2 boards
  arm64: dts: imx8mm/n: Remove the 'pm-ignore-notify' property
  arm64: dts: imx8ulp: add power domain entry for usdhc
  ...

Link: https://lore.kernel.org/r/20211218071427.26745-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2021-12-20 16:06:27 +01:00
Родитель a5a44f4d50 0bc3e333a0
Коммит 33f8b4862a
52 изменённых файлов: 5837 добавлений и 151 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

22
arch/arm64/boot/dts/freescale/Makefile
Просмотреть файл

@ -1,4 +1,14 @@
# SPDX-License-Identifier: GPL-2.0
# required for overlay support
DTC_FLAGS_fsl-ls1028a-qds := -@
DTC_FLAGS_fsl-ls1028a-qds-13bb := -@
DTC_FLAGS_fsl-ls1028a-qds-65bb := -@
DTC_FLAGS_fsl-ls1028a-qds-7777 := -@
DTC_FLAGS_fsl-ls1028a-qds-85bb := -@
DTC_FLAGS_fsl-ls1028a-qds-899b := -@
DTC_FLAGS_fsl-ls1028a-qds-9999 := -@
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
@ -11,6 +21,12 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-13bb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-65bb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-7777.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
@ -40,6 +56,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
@ -47,8 +64,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
@ -60,6 +80,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-r4.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-tqma8mq-mba8mx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-mnt-reform2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb
@ -71,6 +92,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb

113
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts Normal file
Просмотреть файл

@ -0,0 +1,113 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree fragment for LS1028A QDS board, serdes 13bb
*
* Copyright 2019-2021 NXP
*
* Requires a LS1028A QDS board with lane B rework.
* Requires a SCH-30841 card with lane A of connector rewired to PHY lane C.
* Set-up is a SCH-30842 card in slot 1 and SCH-30841 in slot 2.
*/
/dts-v1/;
/plugin/;
/ {
fragment@0 {
target = <&mdio_slot1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
slot1_sgmii: ethernet-phy@2 {
/* AQR112 */
reg = <0x2>;
compatible = "ethernet-phy-ieee802.3-c45";
};
};
};
fragment@1 {
target = <&enetc_port0>;
__overlay__ {
phy-handle = <&slot1_sgmii>;
phy-mode = "usxgmii";
managed = "in-band-status";
status = "okay";
};
};
fragment@2 {
target = <&mdio_slot2>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
/* 4 ports on AQR412 */
slot2_qxgmii0: ethernet-phy@0 {
reg = <0x0>;
compatible = "ethernet-phy-ieee802.3-c45";
};
slot2_qxgmii1: ethernet-phy@1 {
reg = <0x1>;
compatible = "ethernet-phy-ieee802.3-c45";
};
slot2_qxgmii2: ethernet-phy@2 {
reg = <0x2>;
compatible = "ethernet-phy-ieee802.3-c45";
};
slot2_qxgmii3: ethernet-phy@3 {
reg = <0x3>;
compatible = "ethernet-phy-ieee802.3-c45";
};
};
};
fragment@3 {
target = <&mscc_felix_ports>;
__overlay__ {
port@0 {
status = "okay";
phy-handle = <&slot2_qxgmii0>;
phy-mode = "usxgmii";
managed = "in-band-status";
};
port@1 {
status = "okay";
phy-handle = <&slot2_qxgmii1>;
phy-mode = "usxgmii";
managed = "in-band-status";
};
port@2 {
status = "okay";
phy-handle = <&slot2_qxgmii2>;
phy-mode = "usxgmii";
managed = "in-band-status";
};
port@3 {
status = "okay";
phy-handle = <&slot2_qxgmii3>;
phy-mode = "usxgmii";
managed = "in-band-status";
};
};
};
fragment@4 {
target = <&mscc_felix>;
__overlay__ {
status = "okay";
};
};
};

108
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts Normal file
Просмотреть файл

@ -0,0 +1,108 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree fragment for LS1028A QDS board, serdes 69xx
*
* Copyright 2019-2021 NXP
*
* Requires a LS1028A QDS board with lane B rework.
* Requires a SCH-30842 card in slot 1 and a SCH-28021 card in slot 2.
*/
/dts-v1/;
/plugin/;
/ {
fragment@0 {
target = <&mdio_slot1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
slot1_sgmii: ethernet-phy@2 {
/* AQR112 */
reg = <0x2>;
compatible = "ethernet-phy-ieee802.3-c45";
};
};
};
fragment@1 {
target = <&enetc_port0>;
__overlay__ {
phy-handle = <&slot1_sgmii>;
phy-mode = "2500base-x";
managed = "in-band-status";
status = "okay";
};
};
fragment@2 {
target = <&mdio_slot2>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
/* 4 ports on VSC8514 */
slot2_qsgmii0: ethernet-phy@8 {
reg = <0x8>;
};
slot2_qsgmii1: ethernet-phy@9 {
reg = <0x9>;
};
slot2_qsgmii2: ethernet-phy@a {
reg = <0xa>;
};
slot2_qsgmii3: ethernet-phy@b {
reg = <0xb>;
};
};
};
fragment@3 {
target = <&mscc_felix_ports>;
__overlay__ {
port@0 {
status = "okay";
phy-handle = <&slot2_qsgmii0>;
phy-mode = "qsgmii";
managed = "in-band-status";
};
port@1 {
status = "okay";
phy-handle = <&slot2_qsgmii1>;
phy-mode = "qsgmii";
managed = "in-band-status";
};
port@2 {
status = "okay";
phy-handle = <&slot2_qsgmii2>;
phy-mode = "qsgmii";
managed = "in-band-status";
};
port@3 {
status = "okay";
phy-handle = <&slot2_qsgmii3>;
phy-mode = "qsgmii";
managed = "in-band-status";
};
};
};
fragment@4 {
target = <&mscc_felix>;
__overlay__ {
status = "okay";
};
};
};

82
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts Normal file
Просмотреть файл

@ -0,0 +1,82 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree fragment for LS1028A QDS board, serdes 7777
*
* Copyright 2019-2021 NXP
*
* Requires a LS1028A QDS board without lane B rework.
* Requires a SCH-30841 card without lane A/C rewire and with a FW with muxing
* disabled, plugged in slot 1.
*/
/dts-v1/;
/plugin/;
/ {
fragment@0 {
target = <&mdio_slot1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
/* 4 ports on AQR412 */
slot1_sxgmii0: ethernet-phy@0 {
reg = <0x0>;
compatible = "ethernet-phy-ieee802.3-c45";
};
slot1_sxgmii1: ethernet-phy@1 {
reg = <0x1>;
compatible = "ethernet-phy-ieee802.3-c45";
};
slot1_sxgmii2: ethernet-phy@2 {
reg = <0x2>;
compatible = "ethernet-phy-ieee802.3-c45";
};
slot1_sxgmii3: ethernet-phy@3 {
reg = <0x3>;
compatible = "ethernet-phy-ieee802.3-c45";
};
};
};
fragment@1 {
target = <&mscc_felix_ports>;
__overlay__ {
port@0 {
status = "okay";
phy-handle = <&slot1_sxgmii0>;
phy-mode = "2500base-x";
};
port@1 {
status = "okay";
phy-handle = <&slot1_sxgmii1>;
phy-mode = "2500base-x";
};
port@2 {
status = "okay";
phy-handle = <&slot1_sxgmii2>;
phy-mode = "2500base-x";
};
port@3 {
status = "okay";
phy-handle = <&slot1_sxgmii3>;
phy-mode = "2500base-x";
};
};
};
fragment@2 {
target = <&mscc_felix>;
__overlay__ {
status = "okay";
};
};
};

107
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts Normal file
Просмотреть файл

@ -0,0 +1,107 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree fragment for LS1028A QDS board, serdes 85bb
*
* Copyright 2019-2021 NXP
*
* Requires a LS1028A QDS board with lane B rework.
* Requires a SCH-24801 card in slot 1 and a SCH-28021 card in slot 2.
*/
/dts-v1/;
/plugin/;
/ {
fragment@0 {
target = <&mdio_slot1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
slot1_sgmii: ethernet-phy@1c {
/* 1st port on VSC8234 */
reg = <0x1c>;
};
};
};
fragment@1 {
target = <&enetc_port0>;
__overlay__ {
phy-handle = <&slot1_sgmii>;
phy-mode = "sgmii";
managed = "in-band-status";
status = "okay";
};
};
fragment@2 {
target = <&mdio_slot2>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
/* 4 ports on VSC8514 */
slot2_qsgmii0: ethernet-phy@8 {
reg = <0x8>;
};
slot2_qsgmii1: ethernet-phy@9 {
reg = <0x9>;
};
slot2_qsgmii2: ethernet-phy@a {
reg = <0xa>;
};
slot2_qsgmii3: ethernet-phy@b {
reg = <0xb>;
};
};
};
fragment@3 {
target = <&mscc_felix_ports>;
__overlay__ {
port@0 {
status = "okay";
phy-handle = <&slot2_qsgmii0>;
phy-mode = "qsgmii";
managed = "in-band-status";
};
port@1 {
status = "okay";
phy-handle = <&slot2_qsgmii1>;
phy-mode = "qsgmii";
managed = "in-band-status";
};
port@2 {
status = "okay";
phy-handle = <&slot2_qsgmii2>;
phy-mode = "qsgmii";
managed = "in-band-status";
};
port@3 {
status = "okay";
phy-handle = <&slot2_qsgmii3>;
phy-mode = "qsgmii";
managed = "in-band-status";
};
};
};
fragment@4 {
target = <&mscc_felix>;
__overlay__ {
status = "okay";
};
};
};

75
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts Normal file
Просмотреть файл

@ -0,0 +1,75 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree fragment for LS1028A QDS board, serdes 85xx
*
* Copyright 2019-2021 NXP
*
* Requires a LS1028A QDS board without lane B rework.
* Requires a SCH-24801 card in slot 1.
*/
/dts-v1/;
/plugin/;
/ {
fragment@0 {
target = <&mdio_slot1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
/* VSC8234 */
slot1_sgmii0: ethernet-phy@1c {
reg = <0x1c>;
};
slot1_sgmii1: ethernet-phy@1d {
reg = <0x1d>;
};
slot1_sgmii2: ethernet-phy@1e {
reg = <0x1e>;
};
slot1_sgmii3: ethernet-phy@1f {
reg = <0x1f>;
};
};
};
fragment@1 {
target = <&enetc_port0>;
__overlay__ {
phy-handle = <&slot1_sgmii0>;
phy-mode = "sgmii";
managed = "in-band-status";
status = "okay";
};
};
fragment@2 {
target = <&mscc_felix_ports>;
__overlay__ {
port@1 {
status = "okay";
phy-handle = <&slot1_sgmii1>;
phy-mode = "sgmii";
managed = "in-band-status";
};
port@2 {
status = "okay";
phy-handle = <&slot1_sgmii2>;
phy-mode = "sgmii";
managed = "in-band-status";
};
};
};
fragment@3 {
target = <&mscc_felix>;
__overlay__ {
status = "okay";
};
};
};

79
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts Normal file
Просмотреть файл

@ -0,0 +1,79 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree fragment for LS1028A QDS board, serdes 85xx
*
* Copyright 2019-2021 NXP
*
* Requires a LS1028A QDS board without lane B rework.
* Requires a SCH-24801 card in slot 1.
*/
/dts-v1/;
/plugin/;
/ {
fragment@0 {
target = <&mdio_slot1>;
__overlay__ {
#address-cells = <1>;
#size-cells = <0>;
/* VSC8234 */
slot1_sgmii0: ethernet-phy@1c {
reg = <0x1c>;
};
slot1_sgmii1: ethernet-phy@1d {
reg = <0x1d>;
};
slot1_sgmii2: ethernet-phy@1e {
reg = <0x1e>;
};
slot1_sgmii3: ethernet-phy@1f {
reg = <0x1f>;
};
};
};
fragment@1 {
target = <&mscc_felix_ports>;
__overlay__ {
port@0 {
status = "okay";
phy-handle = <&slot1_sgmii0>;
phy-mode = "sgmii";
managed = "in-band-status";
};
port@1 {
status = "okay";
phy-handle = <&slot1_sgmii1>;
phy-mode = "sgmii";
managed = "in-band-status";
};
port@2 {
status = "okay";
phy-handle = <&slot1_sgmii2>;
phy-mode = "sgmii";
managed = "in-band-status";
};
port@3 {
status = "okay";
phy-handle = <&slot1_sgmii3>;
phy-mode = "sgmii";
managed = "in-band-status";
};
};
};
fragment@2 {
target = <&mscc_felix>;
__overlay__ {
status = "okay";
};
};
};

39
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
Просмотреть файл

@ -25,7 +25,7 @@
serial1 = &duart1;
mmc0 = &esdhc;
mmc1 = &esdhc1;
rtc1 = &ftm_alarm0;
rtc1 = &ftm_alarm1;
};
chosen {
@ -211,6 +211,16 @@
status = "okay";
};
&enetc_port1 {
phy-handle = <&qds_phy1>;
phy-mode = "rgmii-id";
status = "okay";
};
&enetc_port2 {
status = "okay";
};
&esdhc {
status = "okay";
};
@ -234,6 +244,10 @@
};
};
&ftm_alarm1 {
status = "okay";
};
&i2c0 {
status = "okay";
@ -272,11 +286,6 @@
vcc-supply = <&sb_3v3>;
};
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
};
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
@ -318,16 +327,28 @@
};
&enetc_port1 {
phy-handle = <&qds_phy1>;
phy-mode = "rgmii-id";
&i2c1 {
status = "okay";
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
};
};
&lpuart0 {
status = "okay";
};
&lpuart1 {
status = "okay";
};
&mscc_felix_port4 {
ethernet = <&enetc_port2>;
status = "okay";
};
&sai1 {
status = "okay";
};

103
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
Просмотреть файл

@ -2,7 +2,7 @@
/*
* Device Tree file for NXP LS1028A RDB Board.
*
* Copyright 2018 NXP
* Copyright 2018-2021 NXP
*
* Harninder Rai <harninder.rai@nxp.com>
*
@ -21,7 +21,14 @@
serial1 = &duart1;
mmc0 = &esdhc;
mmc1 = &esdhc1;
rtc1 = &ftm_alarm0;
rtc1 = &ftm_alarm1;
spi0 = &fspi;
ethernet0 = &enetc_port0;
ethernet1 = &enetc_port2;
ethernet2 = &mscc_felix_port0;
ethernet3 = &mscc_felix_port1;
ethernet4 = &mscc_felix_port2;
ethernet5 = &mscc_felix_port3;
};
chosen {
@ -102,6 +109,48 @@
};
};
&duart0 {
status = "okay";
};
&duart1 {
status = "okay";
};
&enetc_mdio_pf3 {
sgmii_phy0: ethernet-phy@2 {
reg = <0x2>;
};
/* VSC8514 QSGMII quad PHY */
qsgmii_phy0: ethernet-phy@10 {
reg = <0x10>;
};
qsgmii_phy1: ethernet-phy@11 {
reg = <0x11>;
};
qsgmii_phy2: ethernet-phy@12 {
reg = <0x12>;
};
qsgmii_phy3: ethernet-phy@13 {
reg = <0x13>;
};
};
&enetc_port0 {
phy-handle = <&sgmii_phy0>;
phy-mode = "sgmii";
managed = "in-band-status";
status = "okay";
};
&enetc_port2 {
status = "okay";
};
&esdhc {
sd-uhs-sdr104;
sd-uhs-sdr50;
@ -132,6 +181,10 @@
};
};
&ftm_alarm1 {
status = "okay";
};
&i2c0 {
status = "okay";
@ -188,48 +241,6 @@
};
};
&duart0 {
status = "okay";
};
&duart1 {
status = "okay";
};
&enetc_mdio_pf3 {
sgmii_phy0: ethernet-phy@2 {
reg = <0x2>;
};
/* VSC8514 QSGMII quad PHY */
qsgmii_phy0: ethernet-phy@10 {
reg = <0x10>;
};
qsgmii_phy1: ethernet-phy@11 {
reg = <0x11>;
};
qsgmii_phy2: ethernet-phy@12 {
reg = <0x12>;
};
qsgmii_phy3: ethernet-phy@13 {
reg = <0x13>;
};
};
&enetc_port0 {
phy-handle = <&sgmii_phy0>;
phy-mode = "sgmii";
managed = "in-band-status";
status = "okay";
};
&enetc_port2 {
status = "okay";
};
&mscc_felix {
status = "okay";
};
@ -275,6 +286,10 @@
status = "okay";
};
&pwm0 {
status = "okay";
};
&sai4 {
status = "okay";
};

130
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
Просмотреть файл

@ -66,6 +66,13 @@
};
};
rtc_clk: rtc-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "rtc_clk";
};
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@ -637,6 +644,18 @@
status = "disabled";
};
pcie_ep1: pcie-ep@3400000 {
compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
reg = <0x00 0x03400000 0x0 0x00100000
0x80 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
interrupt-names = "pme";
num-ib-windows = <6>;
num-ob-windows = <8>;
status = "disabled";
};
pcie2: pcie@3500000 {
compatible = "fsl,ls1028a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
@ -664,6 +683,18 @@
status = "disabled";
};
pcie_ep2: pcie-ep@3500000 {
compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
reg = <0x00 0x03500000 0x0 0x00100000
0x88 0x00000000 0x8 0x00000000>;
reg-names = "regs", "addr_space";
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
interrupt-names = "pme";
num-ib-windows = <6>;
num-ob-windows = <8>;
status = "disabled";
};
smmu: iommu@5000000 {
compatible = "arm,mmu-500";
reg = <0 0x5000000 0 0x800000>;
@ -1084,7 +1115,7 @@
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
ports {
mscc_felix_ports: ports {
#address-cells = <1>;
#size-cells = <0>;
@ -1162,6 +1193,94 @@
reg = <0x01 0xf0800000 0x0 0x10000>;
};
pwm0: pwm@2800000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x2800000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&rtc_clk>, <&clockgen 4 1>;
status = "disabled";
};
pwm1: pwm@2810000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x2810000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&rtc_clk>, <&clockgen 4 1>;
status = "disabled";
};
pwm2: pwm@2820000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x2820000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&rtc_clk>, <&clockgen 4 1>;
status = "disabled";
};
pwm3: pwm@2830000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x2830000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&rtc_clk>, <&clockgen 4 1>;
status = "disabled";
};
pwm4: pwm@2840000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x2840000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&rtc_clk>, <&clockgen 4 1>;
status = "disabled";
};
pwm5: pwm@2850000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x2850000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&rtc_clk>, <&clockgen 4 1>;
status = "disabled";
};
pwm6: pwm@2860000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x2860000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&rtc_clk>, <&clockgen 4 1>;
status = "disabled";
};
pwm7: pwm@2870000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x0 0x2870000 0x0 0x10000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
<&rtc_clk>, <&clockgen 4 1>;
status = "disabled";
};
rcpm: power-controller@1e34040 {
compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x1c>;
@ -1174,6 +1293,15 @@
reg = <0x0 0x2800000 0x0 0x10000>;
fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
ftm_alarm1: timer@2810000 {
compatible = "fsl,ls1028a-ftm-alarm";
reg = <0x0 0x2810000 0x0 0x10000>;
fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};

2
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
Просмотреть файл

@ -94,6 +94,8 @@
compatible = "n25q128a13", "jedec,spi-nor"; /* 16MB */
reg = <0>;
spi-max-frequency = <1000000>; /* input clock */
fsl,spi-cs-sck-delay = <100>;
fsl,spi-sck-cs-delay = <100>;
};
slic@2 {

13
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
Просмотреть файл

@ -206,6 +206,13 @@
clock-output-names = "sysclk";
};
reboot {
compatible = "syscon-reboot";
regmap = <&reset>;
offset = <0x0>;
mask = <0x02>;
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
@ -226,6 +233,11 @@
little-endian;
};
reset: syscon@1e60000 {
compatible = "fsl,ls1088a-reset", "syscon";
reg = <0x0 0x1e60000 0x0 0x10000>;
};
isc: syscon@1f70000 {
compatible = "fsl,ls1088a-isc", "syscon";
reg = <0x0 0x1f70000 0x0 0x10000>;
@ -485,6 +497,7 @@
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
status = "disabled";
};

149
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
Просмотреть файл

@ -31,6 +31,130 @@
regulator-boot-on;
regulator-always-on;
};
mdio-mux-1 {
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 0>;
mdio-parent-bus = <&emdio1>;
#address-cells=<1>;
#size-cells = <0>;
mdio@0 { /* On-board PHY #1 RGMI1*/
reg = <0x00>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@8 { /* On-board PHY #2 RGMI2*/
reg = <0x8>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@18 { /* Slot #1 */
reg = <0x18>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@19 { /* Slot #2 */
reg = <0x19>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1a { /* Slot #3 */
reg = <0x1a>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1b { /* Slot #4 */
reg = <0x1b>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1c { /* Slot #5 */
reg = <0x1c>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1d { /* Slot #6 */
reg = <0x1d>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1e { /* Slot #7 */
reg = <0x1e>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1f { /* Slot #8 */
reg = <0x1f>;
#address-cells = <1>;
#size-cells = <0>;
};
};
mdio-mux-2 {
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 1>;
mdio-parent-bus = <&emdio2>;
#address-cells=<1>;
#size-cells = <0>;
mdio@0 { /* Slot #1 (secondary EMI) */
reg = <0x00>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@1 { /* Slot #2 (secondary EMI) */
reg = <0x01>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@2 { /* Slot #3 (secondary EMI) */
reg = <0x02>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@3 { /* Slot #4 (secondary EMI) */
reg = <0x03>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@4 { /* Slot #5 (secondary EMI) */
reg = <0x04>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@5 { /* Slot #6 (secondary EMI) */
reg = <0x05>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@6 { /* Slot #7 (secondary EMI) */
reg = <0x06>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@7 { /* Slot #8 (secondary EMI) */
reg = <0x07>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&can0 {
@ -81,6 +205,14 @@
};
};
&emdio1 {
status = "okay";
};
&emdio2 {
status = "okay";
};
&esdhc0 {
status = "okay";
};
@ -107,6 +239,19 @@
&i2c0 {
status = "okay";
fpga@66 {
compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
"simple-mfd";
reg = <0x66>;
mux: mux-controller {
compatible = "reg-mux";
#mux-control-cells = <1>;
mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
<0x54 0x07>; /* 1: reg 0x54, bit 2:0 */
};
};
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
@ -156,6 +301,10 @@
};
};
&optee {
status = "okay";
};
&sata0 {
status = "okay";
};

21
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
Просмотреть файл

@ -49,6 +49,14 @@
managed = "in-band-status";
};
&dpmac5 {
phy-handle = <&inphi_phy>;
};
&dpmac6 {
phy-handle = <&inphi_phy>;
};
&dpmac17 {
phy-handle = <&rgmii_phy1>;
phy-connection-type = "rgmii-id";
@ -109,6 +117,15 @@
};
};
&emdio2 {
status = "okay";
inphi_phy: ethernet-phy@0 {
compatible = "ethernet-phy-id0210.7440";
reg = <0x0>;
};
};
&esdhc0 {
sd-uhs-sdr104;
sd-uhs-sdr50;
@ -202,6 +219,10 @@
};
};
&optee {
status = "okay";
};
&pcs_mdio3 {
status = "okay";
};

10
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
Просмотреть файл

@ -1023,6 +1023,7 @@
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
usb3-lpm-capable;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
status = "disabled";
@ -1034,6 +1035,7 @@
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
usb3-lpm-capable;
snps,dis_rxdet_inp3_quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
status = "disabled";
@ -1751,4 +1753,12 @@
};
};
};
firmware {
optee: optee {
compatible = "linaro,optee-tz";
method = "smc";
status = "disabled";
};
};
};

21
arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
Просмотреть файл

@ -167,6 +167,14 @@
};
};
&can0 {
status = "okay";
};
&can1 {
status = "okay";
};
&crypto {
status = "okay";
};
@ -226,10 +234,17 @@
};
&esdhc0 {
sd-uhs-sdr104;
sd-uhs-sdr50;
sd-uhs-sdr25;
sd-uhs-sdr12;
status = "okay";
};
&esdhc1 {
mmc-hs200-1_8v;
mmc-hs400-1_8v;
bus-width = <8>;
status = "okay";
};
@ -302,11 +317,17 @@
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
/* IRQ_RTC_B -> IRQ11_B(CPLD) -> IRQ11(CPU), active low */
interrupts-extended = <&extirq 11 IRQ_TYPE_LEVEL_LOW>;
};
};
};
};
&optee {
status = "okay";
};
&sata0 {
status = "okay";
};

93
arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
Просмотреть файл

@ -43,6 +43,27 @@
enable-active-high;
};
reg_usbotg1: regulator-usbotg1 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb_otg1>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_camera: regulator-camera {
compatible = "regulator-fixed";
regulator-name = "mipi_pwr";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&pca6416_1 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100000>;
};
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
regulator-name = "VSD_3V3";
@ -67,6 +88,10 @@
};
};
&csi {
status = "okay";
};
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_espi2>;
@ -90,6 +115,30 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
camera@3c {
compatible = "ovti,ov5640";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ov5640>;
reg = <0x3c>;
clocks = <&clk IMX8MM_CLK_CLKO1>;
clock-names = "xclk";
assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
assigned-clock-rates = <24000000>;
AVDD-supply = <&reg_camera>; /* 2.8v */
powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
port {
/* MIPI CSI-2 bus endpoint */
ov5640_to_mipi_csi2: endpoint {
remote-endpoint = <&imx8mm_mipi_csi_in>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
};
};
&i2c4 {
@ -141,6 +190,18 @@
};
};
&mipi_csi {
status = "okay";
ports {
port@0 {
imx8mm_mipi_csi_in: endpoint {
remote-endpoint = <&ov5640_to_mipi_csi2>;
data-lanes = <1 2>;
};
};
};
};
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
@ -169,6 +230,24 @@
status = "okay";
};
&usbotg1 {
vbus-supply = <&reg_usbotg1>;
disable-over-current;
dr_mode="otg";
status = "okay";
};
&usbotg2 {
pinctrl-names = "default";
disable-over-current;
dr_mode="host";
status = "okay";
};
&usbphynop2 {
reset-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
};
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
@ -209,12 +288,26 @@
>;
};
pinctrl_ov5640: ov5640grp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19
MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19
MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x59
>;
};
pinctrl_pcal6414: pcal6414-gpiogrp {
fsl,pins = <
MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19
>;
};
pinctrl_reg_usb_otg1: usbotg1grp {
fsl,pins = <
MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19
>;
};
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6

1
arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
Просмотреть файл

@ -263,7 +263,6 @@
bus-width = <4>;
non-removable;
cap-power-off-card;
pm-ignore-notify;
keep-power-in-suspend;
mmc-pwrseq = <&usdhc1_pwrseq>;
status = "okay";

7
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
Просмотреть файл

@ -116,6 +116,13 @@
reg = <0>;
reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
qca,disable-smarteee;
vddio-supply = <&vddio>;
vddio: vddio-regulator {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
};
};

1
arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts
Просмотреть файл

@ -91,7 +91,6 @@
max-frequency = <50000000>;
bus-width = <4>;
no-1-8-v;
pm-ignore-notify;
keep-power-in-suspend;
status = "okay";
};

1
arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dts
Просмотреть файл

@ -91,7 +91,6 @@
max-frequency = <50000000>;
bus-width = <4>;
no-1-8-v;
pm-ignore-notify;
keep-power-in-suspend;
status = "okay";
};

253
arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts Normal file
Просмотреть файл

@ -0,0 +1,253 @@
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Copyright 2020-2021 TQ-Systems GmbH
*/
/dts-v1/;
#include "imx8mm-tqma8mqml.dtsi"
#include "mba8mx.dtsi"
/ {
model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx";
compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
aliases {
eeprom0 = &eeprom3;
mmc0 = &usdhc3;
mmc1 = &usdhc2;
mmc2 = &usdhc1;
rtc0 = &pcf85063;
rtc1 = &snvs_rtc;
};
reg_usdhc2_vmmc: regulator-vmmc {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-name = "VSD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100>;
off-on-delay-us = <12000>;
};
extcon_usbotg1: extcon-usbotg1 {
compatible = "linux,extcon-usb-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1_extcon>;
id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
};
&i2c1 {
expander2: gpio@27 {
compatible = "nxp,pca9555";
reg = <0x27>;
gpio-controller;
#gpio-cells = <2>;
vcc-supply = <&reg_vcc_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_expander>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
&sai3 {
assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
clocks = <&clk IMX8MM_CLK_SAI3_IPG>, <&clk IMX8MM_CLK_DUMMY>,
<&clk IMX8MM_CLK_SAI3_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
<&clk IMX8MM_AUDIO_PLL2_OUT>;
};
&tlv320aic3x04 {
clock-names = "mclk";
clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
};
&uart1 {
assigned-clocks = <&clk IMX8MM_CLK_UART1>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
};
&uart2 {
assigned-clocks = <&clk IMX8MM_CLK_UART2>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
};
&usbotg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1>;
dr_mode = "otg";
extcon = <&extcon_usbotg1>;
srp-disable;
hnp-disable;
adp-disable;
power-active-high;
over-current-active-low;
status = "okay";
};
&usbotg2 {
dr_mode = "host";
disable-over-current;
vbus-supply = <&reg_hub_vbus>;
status = "okay";
};
&iomuxc {
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x00000006>,
<MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x00000006>,
<MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x00000006>,
<MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x00000006>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x00000006>,
<MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x00000006>,
<MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x00000006>,
<MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x00000006>;
};
pinctrl_expander: expandergrp {
fsl,pins = <MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x94>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x40000002>,
<MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x40000002>,
<MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x14>,
<MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x14>,
<MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x14>,
<MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x14>,
<MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x90>,
<MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x90>,
<MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x90>,
<MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x90>,
<MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x14>,
<MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x90>,
<MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x90>,
<MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x14>;
};
pinctrl_gpiobutton: gpiobuttongrp {
fsl,pins = <MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x84>,
<MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x84>,
<MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0 0x84>;
};
pinctrl_gpioled: gpioledgrp {
fsl,pins = <MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x84>,
<MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14 0x84>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000004>,
<MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000004>;
};
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x40000004>,
<MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x40000004>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000004>,
<MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000004>;
};
pinctrl_i2c3_gpio: i2c3gpiogrp {
fsl,pins = <MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x40000004>,
<MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x40000004>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <MX8MM_IOMUXC_GPIO1_IO14_PWM3_OUT 0x14>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT 0x14>;
};
pinctrl_sai3: sai3grp {
fsl,pins = <MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0x94>,
<MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x94>,
<MX8MM_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0x94>,
<MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x94>,
<MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x94>,
<MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x94>,
<MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x94>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x16>,
<MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x16>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x16>,
<MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x16>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x16>,
<MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x16>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x16>,
<MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x16>;
};
pinctrl_usbotg1: usbotg1grp {
fsl,pins = <MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x84>,
<MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x84>;
};
pinctrl_usb1_extcon: usb1-extcongrp {
fsl,pins = <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x1c0>;
};
pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
fsl,pins = <MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x84>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4>,
<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4>,
<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4>,
<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4>,
<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4>,
<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4>,
<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4>,
<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4>,
<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4>,
<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4>,
<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4>,
<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4>,
<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4>,
<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4>,
<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4>,
<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4>,
<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4>,
<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4>,
<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84>;
};
};

335
arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi Normal file
Просмотреть файл

@ -0,0 +1,335 @@
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Copyright 2020-2021 TQ-Systems GmbH
*/
#include "imx8mm.dtsi"
/ {
model = "TQ-Systems GmbH i.MX8MM TQMa8MxML";
compatible = "tq,imx8mm-tqma8mqml", "fsl,imx8mm";
memory@40000000 {
device_type = "memory";
/* our minimum RAM config will be 1024 MiB */
reg = <0x00000000 0x40000000 0 0x40000000>;
};
/* e-MMC IO, needed for HS modes */
reg_vcc1v8: regulator-vcc1v8 {
compatible = "regulator-fixed";
regulator-name = "TQMA8MXML_VCC1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
/* identical to buck4_reg, but should never change */
reg_vcc3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "TQMA8MXML_VCC3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/* global autoconfigured region for contiguous allocations */
linux,cma {
compatible = "shared-dma-pool";
reusable;
/* 640 MiB */
size = <0 0x28000000>;
/* 1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
alloc-ranges = <0 0x40000000 0 0x78000000>;
linux,cma-default;
};
};
};
&A53_0 {
cpu-supply = <&buck2_reg>;
};
&flexspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexspi>;
status = "okay";
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <84000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
&gpu_2d {
status = "okay";
};
&gpu_3d {
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
sensor0: temperature-sensor-eeprom@1b {
compatible = "nxp,se97", "jedec,jc-42.4-temp";
reg = <0x1b>;
};
pca9450: pmic@25 {
compatible = "nxp,pca9450a";
reg = <0x25>;
/* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
pinctrl-0 = <&pinctrl_pmic>;
pinctrl-names = "default";
interrupt-parent = <&gpio1>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
regulators {
/* V_0V85_SOC: 0.85 */
buck1_reg: BUCK1 {
regulator-name = "BUCK1";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
/* VDD_ARM */
buck2_reg: BUCK2 {
regulator-name = "BUCK2";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
nxp,dvs-run-voltage = <950000>;
nxp,dvs-standby-voltage = <850000>;
regulator-ramp-delay = <3125>;
};
/* V_0V85_GPU / DRAM / VPU */
buck3_reg: BUCK3 {
regulator-name = "BUCK3";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <950000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
/* VCC3V3 -> VMMC, ... must not be changed */
buck4_reg: BUCK4 {
regulator-name = "BUCK4";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
/* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
buck5_reg: BUCK5 {
regulator-name = "BUCK5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
/* V_1V1 -> RAM, ... must not be changed */
buck6_reg: BUCK6 {
regulator-name = "BUCK6";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-boot-on;
regulator-always-on;
};
/* V_1V8_SNVS */
ldo1_reg: LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
/* V_0V8_SNVS */
ldo2_reg: LDO2 {
regulator-name = "LDO2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <850000>;
regulator-boot-on;
regulator-always-on;
};
/* V_1V8_ANA */
ldo3_reg: LDO3 {
regulator-name = "LDO3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
/* V_0V9_MIPI */
ldo4_reg: LDO4 {
regulator-name = "LDO4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
};
/* VCC SD IO - switched using SD2 VSELECT */
ldo5_reg: LDO5 {
regulator-name = "LDO5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
};
};
pcf85063: rtc@51 {
compatible = "nxp,pcf85063a";
reg = <0x51>;
quartz-load-femtofarads = <7000>;
};
eeprom1: eeprom@53 {
compatible = "nxp,se97b", "atmel,24c02";
read-only;
reg = <0x53>;
pagesize = <16>;
};
eeprom0: eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
pagesize = <32>;
};
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
non-removable;
no-sd;
no-sdio;
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc1v8>;
status = "okay";
};
/*
* Attention:
* wdog reset is routed to PMIC, PMIC must be preconfigured to force POR
* without LDO for SNVS. GPIO1_IO02 must not be used as GPIO.
*/
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl_flexspi: flexspigrp {
fsl,pins = <MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82>,
<MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82>,
<MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82>,
<MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82>,
<MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82>,
<MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000004>,
<MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000004>;
};
pinctrl_i2c1_gpio: i2c1gpiogrp {
fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x40000004>,
<MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x40000004>;
};
pinctrl_pmic: pmicgrp {
fsl,pins = <MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x94>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x84>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d4>,
<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2>,
<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4>,
<MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4>,
<MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4>,
<MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4>,
<MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4>,
<MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84>,
/* option USDHC3_RESET_B not defined, only in RM */
<MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x84>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d2>,
<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2>,
<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4>,
<MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4>,
<MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4>,
<MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4>,
<MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4>,
<MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84>,
/* option USDHC3_RESET_B not defined, only in RM */
<MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x84>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d6>,
<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2>,
<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4>,
<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4>,
<MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4>,
<MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4>,
<MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4>,
<MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4>,
<MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84>,
/* option USDHC3_RESET_B not defined, only in RM */
<MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x84>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x84>;
};
};

86
arch/arm64/boot/dts/freescale/imx8mm.dtsi
Просмотреть файл

@ -65,6 +65,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
nvmem-cells = <&cpu_speed_grade>;
@ -80,6 +86,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
@ -93,6 +105,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
@ -106,6 +124,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MM_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
@ -114,6 +138,10 @@
A53_L2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-size = <0x80000>;
cache-line-size = <64>;
cache-sets = <512>;
};
};
@ -591,8 +619,7 @@
<&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
<&clk IMX8MM_SYS_PLL3>,
<&clk IMX8MM_VIDEO_PLL1>,
<&clk IMX8MM_AUDIO_PLL1>,
<&clk IMX8MM_AUDIO_PLL2>;
<&clk IMX8MM_AUDIO_PLL1>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
<&clk IMX8MM_ARM_PLL_OUT>,
<&clk IMX8MM_SYS_PLL3_OUT>,
@ -602,8 +629,7 @@
<400000000>,
<750000000>,
<594000000>,
<393216000>,
<361267200>;
<393216000>;
};
src: reset-controller@30390000 {
@ -1054,7 +1080,6 @@
fsl,num-rx-queues = <3>;
nvmem-cells = <&fec_mac_address>;
nvmem-cell-names = "mac-address";
nvmem_macaddr_swap;
fsl,stop-mode = <&gpr 0x10 3>;
status = "disabled";
};
@ -1068,6 +1093,22 @@
#size-cells = <1>;
ranges = <0x32c00000 0x32c00000 0x400000>;
csi: csi@32e20000 {
compatible = "fsl,imx8mm-csi", "fsl,imx7-csi";
reg = <0x32e20000 0x1000>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MM_CLK_CSI1_ROOT>;
clock-names = "mclk";
power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_CSI_BRIDGE>;
status = "disabled";
port {
csi_in: endpoint {
remote-endpoint = <&imx8mm_mipi_csi_out>;
};
};
};
disp_blk_ctrl: blk-ctrl@32e28000 {
compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
reg = <0x32e28000 0x100>;
@ -1095,6 +1136,41 @@
#power-domain-cells = <1>;
};
mipi_csi: mipi-csi@32e30000 {
compatible = "fsl,imx8mm-mipi-csi2";
reg = <0x32e30000 0x1000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>,
<&clk IMX8MM_CLK_CSI1_PHY_REF>;
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
<&clk IMX8MM_SYS_PLL2_1000M>;
clock-frequency = <333000000>;
clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
<&clk IMX8MM_CLK_CSI1_ROOT>,
<&clk IMX8MM_CLK_CSI1_PHY_REF>,
<&clk IMX8MM_CLK_DISP_AXI_ROOT>;
clock-names = "pclk", "wrap", "phy", "axi";
power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_CSI>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
};
port@1 {
reg = <1>;
imx8mm_mipi_csi_out: endpoint {
remote-endpoint = <&csi_in>;
};
};
};
};
usbotg1: usb@32e40000 {
compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
reg = <0x32e40000 0x200>;

1
arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
Просмотреть файл

@ -126,7 +126,6 @@
compatible = "wlf,wm8962";
reg = <0x1a>;
clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
clock-names = "xclk";
DCVDD-supply = <&reg_audio>;
DBVDD-supply = <&reg_audio>;
AVDD-supply = <&reg_audio>;

1
arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
Просмотреть файл

@ -274,7 +274,6 @@
bus-width = <4>;
non-removable;
cap-power-off-card;
pm-ignore-notify;
keep-power-in-suspend;
mmc-pwrseq = <&usdhc1_pwrseq>;
status = "okay";

426
arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi Normal file
Просмотреть файл

@ -0,0 +1,426 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2021 Collabora Ltd.
* Copyright 2021 BSH Hausgeraete GmbH
*/
/dts-v1/;
#include "imx8mn.dtsi"
/ {
chosen {
stdout-path = &uart4;
};
fec_supply: fec-supply-en {
compatible = "regulator-fixed";
vin-supply = <&buck4_reg>;
regulator-name = "tja1101_en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
usdhc2_pwrseq: usdhc2-pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_pwrseq>;
reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
};
};
&A53_0 {
cpu-supply = <&buck2_reg>;
};
&A53_1 {
cpu-supply = <&buck2_reg>;
};
&A53_2 {
cpu-supply = <&buck2_reg>;
};
&A53_3 {
cpu-supply = <&buck2_reg>;
};
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_espi2>;
status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rmii";
phy-handle = <&ethphy0>;
phy-supply = <&fec_supply>;
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
reset-assert-us = <20>;
reset-deassert-us = <2000>;
};
};
};
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
bd71847: pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clock-output-names = "clk-32k-out";
regulators {
buck1_reg: BUCK1 {
/* PMIC_BUCK1 - VDD_SOC */
regulator-name = "buck1";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
};
buck2_reg: BUCK2 {
/* PMIC_BUCK2 - VDD_ARM */
regulator-name = "buck2";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <1250>;
};
buck3_reg: BUCK3 {
/* PMIC_BUCK5 - VDD_DRAM_VPU_GPU */
regulator-name = "buck3";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-boot-on;
regulator-always-on;
};
buck4_reg: BUCK4 {
/* PMIC_BUCK6 - VDD_3V3 */
regulator-name = "buck4";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
buck5_reg: BUCK5 {
/* PMIC_BUCK7 - VDD_1V8 */
regulator-name = "buck5";
regulator-min-microvolt = <1605000>;
regulator-max-microvolt = <1995000>;
regulator-boot-on;
regulator-always-on;
};
buck6_reg: BUCK6 {
/* PMIC_BUCK8 - NVCC_DRAM */
regulator-name = "buck6";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
regulator-always-on;
};
ldo1_reg: LDO1 {
/* PMIC_LDO1 - NVCC_SNVS_1V8 */
regulator-name = "ldo1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <1900000>;
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: LDO2 {
/* PMIC_LDO2 - VDD_SNVS_0V8 */
regulator-name = "ldo2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: LDO3 {
/* PMIC_LDO3 - VDDA_1V8 */
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: LDO4 {
/* PMIC_LDO4 - VDD_MIPI_0V9 */
regulator-name = "ldo4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ldo6_reg: LDO6 {
/* PMIC_LDO6 - VDD_MIPI_1V2 */
regulator-name = "ldo6";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
&i2c4 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
assigned-clocks = <&clk IMX8MN_CLK_UART3>;
assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_80M>;
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "brcm,bcm43438-bt";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_bluetooth>;
shutdown-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
device-wakeup-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
max-speed = <3000000>;
};
};
/* Console */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usbotg1 {
dr_mode = "peripheral";
disable-over-current;
status = "okay";
};
&usdhc2 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
mmc-pwrseq = <&usdhc2_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
brcmf: bcrmf@1 {
compatible = "brcm,bcm4329-fmac";
reg = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wlan>;
interrupt-parent = <&gpio1>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "host-wake";
};
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl_bluetooth: bluetoothgrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x044 /* BT_REG_ON */
MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18 0x046 /* BT_DEV_WAKE */
MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28 0x090 /* BT_HOST_WAKE */
>;
};
pinctrl_espi2: espi2grp {
fsl,pins = <
MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x082
MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x082
MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x082
MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x040
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x002
MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x002
MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x090
MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x090
MX8MN_IOMUXC_ENET_RXC_ENET1_RX_ER 0x090
MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x016
MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x016
MX8MN_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x016
MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x016
MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x090
MX8MN_IOMUXC_ENET_TXC_ENET1_TX_ER 0x016
MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x150 /* RMII_INT - ENET_INT */
MX8MN_IOMUXC_SD2_WP_GPIO2_IO20 0x150 /* RMII_EN - ENET_EN */
MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x016 /* RMII_WAKE - GPIO_ENET_WAKE */
MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29 0x016 /* RMII_RESET - GPIO_ENET_RST */
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400000c2
MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400000c2
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400000c2
MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400000c2
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400000c2
MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400000c2
>;
};
pinctrl_pmic: pmicirq {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x040
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x040
MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x040
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x040
MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x040
MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x040
MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x040
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x040
MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x040
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x090
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0d0
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0d0
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0d0
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0d0
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0d0
>;
};
pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
fsl,pins = <
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x094
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0d4
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0d4
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0d4
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0d4
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0d4
>;
};
pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
fsl,pins = <
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x096
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0d6
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0d6
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0d6
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0d6
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0d6
>;
};
pinctrl_usdhc2_pwrseq: usdhc2pwrseqgrp {
fsl,pins = <
MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x040 /* WL_REG_ON */
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x046
>;
};
pinctrl_wlan: wlangrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x0d6 /* GPIO_0 - WIFI_GPIO_0 */
MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x0d6 /* GPIO_1 - WIFI_GPIO_1 */
MX8MN_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x0d6 /* BT_GPIO_5 - WIFI_GPIO_5 */
MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x0d6 /* I2S_CLK - WIFI_GPIO_6 */
>;
};
};

48
arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2.dts Normal file
Просмотреть файл

@ -0,0 +1,48 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2021 Collabora Ltd.
* Copyright 2021 BSH Hausgeraete GmbH
*/
/dts-v1/;
#include "imx8mn-bsh-smm-s2-common.dtsi"
/ {
model = "BSH SMM S2";
compatible = "bsh,imx8mn-bsh-smm-s2", "fsl,imx8mn";
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0x0 0x10000000>;
};
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
status = "okay";
};
&iomuxc {
pinctrl_gpmi_nand: gpmi-nand {
fsl,pins = <
MX8MN_IOMUXC_NAND_ALE_RAWNAND_ALE 0x00000096
MX8MN_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x00000096
MX8MN_IOMUXC_NAND_CLE_RAWNAND_CLE 0x00000096
MX8MN_IOMUXC_NAND_DATA00_RAWNAND_DATA00 0x00000096
MX8MN_IOMUXC_NAND_DATA01_RAWNAND_DATA01 0x00000096
MX8MN_IOMUXC_NAND_DATA02_RAWNAND_DATA02 0x00000096
MX8MN_IOMUXC_NAND_DATA03_RAWNAND_DATA03 0x00000096
MX8MN_IOMUXC_NAND_DATA04_RAWNAND_DATA04 0x00000096
MX8MN_IOMUXC_NAND_DATA05_RAWNAND_DATA05 0x00000096
MX8MN_IOMUXC_NAND_DATA06_RAWNAND_DATA06 0x00000096
MX8MN_IOMUXC_NAND_DATA07_RAWNAND_DATA07 0x00000096
MX8MN_IOMUXC_NAND_RE_B_RAWNAND_RE_B 0x00000096
MX8MN_IOMUXC_NAND_READY_B_RAWNAND_READY_B 0x00000056
MX8MN_IOMUXC_NAND_WE_B_RAWNAND_WE_B 0x00000096
MX8MN_IOMUXC_NAND_WP_B_RAWNAND_WP_B 0x00000096
>;
};
};

80
arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts Normal file
Просмотреть файл

@ -0,0 +1,80 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2021 Collabora Ltd.
* Copyright 2021 BSH Hausgeraete GmbH
*/
/dts-v1/;
#include "imx8mn-bsh-smm-s2-common.dtsi"
/ {
model = "BSH SMM S2 PRO";
compatible = "bsh,imx8mn-bsh-smm-s2pro", "fsl,imx8mn";
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0x0 0x20000000>;
};
};
/* eMMC */
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <8>;
non-removable;
status = "okay";
};
&iomuxc {
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000090
MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x0d0
MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x0d0
MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x0d0
MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x0d0
MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x0d0
MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x0d0
MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x0d0
MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x0d0
MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x0d0
MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x090
>;
};
pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
fsl,pins = <
MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000094
MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x0d4
MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x0d4
MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x0d4
MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x0d4
MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x0d4
MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x0d4
MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x0d4
MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x0d4
MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x0d4
MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x094
>;
};
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
fsl,pins = <
MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x40000096
MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x0d6
MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x0d6
MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x0d6
MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x0d6
MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x0d6
MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x0d6
MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x0d6
MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x0d6
MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x0d6
MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x096
>;
};
};

9
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
Просмотреть файл

@ -97,6 +97,15 @@
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
qca,disable-smarteee;
vddio-supply = <&vddio>;
vddio: vddio-regulator {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
};
};

237
arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts Normal file
Просмотреть файл

@ -0,0 +1,237 @@
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Copyright 2020-2021 TQ-Systems GmbH
*/
/dts-v1/;
#include "imx8mn-tqma8mqnl.dtsi"
#include "mba8mx.dtsi"
/ {
model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx";
compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
aliases {
eeprom0 = &eeprom3;
mmc0 = &usdhc3;
mmc1 = &usdhc2;
mmc2 = &usdhc1;
rtc0 = &pcf85063;
rtc1 = &snvs_rtc;
};
reg_usdhc2_vmmc: regulator-vmmc {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-name = "VSD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <100>;
off-on-delay-us = <12000>;
};
};
/* Located on TQMa8MxML-ADAP */
&gpio2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0hub_sel>;
sel-usb-hub-hog {
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
output-high;
};
};
&i2c1 {
expander2: gpio@27 {
compatible = "nxp,pca9555";
reg = <0x27>;
gpio-controller;
#gpio-cells = <2>;
vcc-supply = <&reg_vcc_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_expander2>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
&sai3 {
assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
clocks = <&clk IMX8MN_CLK_SAI3_IPG>, <&clk IMX8MN_CLK_DUMMY>,
<&clk IMX8MN_CLK_SAI3_ROOT>, <&clk IMX8MN_CLK_DUMMY>,
<&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_AUDIO_PLL1_OUT>,
<&clk IMX8MN_AUDIO_PLL2_OUT>;
};
&tlv320aic3x04 {
clock-names = "mclk";
clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
};
&usbotg1 {
dr_mode = "host";
disable-over-current;
power-active-high;
status = "okay";
};
&iomuxc {
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x00000146>,
<MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x00000146>,
<MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x00000146>,
<MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x00000146>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x00000146>,
<MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x00000146>,
<MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x00000146>,
<MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x00000146>;
};
pinctrl_expander2: expander2grp {
fsl,pins = <MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x94>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x40000002>,
<MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x40000002>,
<MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x14>,
<MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x14>,
<MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x14>,
<MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x14>,
<MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x90>,
<MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x90>,
<MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x90>,
<MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x90>,
<MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x14>,
<MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x90>,
<MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x90>,
<MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x14>;
};
pinctrl_gpiobutton: gpiobuttongrp {
fsl,pins = <MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x84>,
<MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x84>,
<MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0 0x84>;
};
pinctrl_gpioled: gpioledgrp {
fsl,pins = <MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x84>,
<MX8MN_IOMUXC_NAND_DQS_GPIO3_IO14 0x84>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001C4>,
<MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001C4>;
};
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16 0x400001C4>,
<MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17 0x400001C4>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001C4>,
<MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001C4>;
};
pinctrl_i2c3_gpio: i2c3gpiogrp {
fsl,pins = <MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18 0x400001C4>,
<MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19 0x400001C4>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <MX8MN_IOMUXC_GPIO1_IO14_PWM3_OUT 0x14>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <MX8MN_IOMUXC_GPIO1_IO15_PWM4_OUT 0x14>;
};
pinctrl_sai3: sai3grp {
fsl,pins = <MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0x94>,
<MX8MN_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x94>,
<MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0x94>,
<MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x94>,
<MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x94>,
<MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x94>,
<MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x94>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x16>,
<MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x16>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x16>,
<MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x16>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x16>,
<MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x16>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x16>,
<MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x16>;
};
pinctrl_usb0hub_sel: usb0hub-selgrp {
/* SEL_USB_HUB_B */
fsl,pins = <MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1 0x84>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x84>,
<MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x84>,
<MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID 0x1C4>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4>,
<MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4>,
<MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4>,
<MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4>,
<MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x1d4>,
<MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4>,
<MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4>,
<MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x84>;
};
pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
fsl,pins = <MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x84>;
};
};

322
arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi Normal file
Просмотреть файл

@ -0,0 +1,322 @@
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Copyright 2020-2021 TQ-Systems GmbH
*/
#include "imx8mn.dtsi"
/ {
model = "TQ-Systems i.MX8MN TQMa8MxNL";
compatible = "tq,imx8mn-tqma8mqnl", "fsl,imx8mn";
memory@40000000 {
device_type = "memory";
/* our minimum RAM config will be 1024 MiB */
reg = <0x00000000 0x40000000 0 0x40000000>;
};
/* e-MMC IO, needed for HS modes */
reg_vcc1v8: regulator-vcc1v8 {
compatible = "regulator-fixed";
regulator-name = "TQMA8MXNL_VCC1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
reg_vcc3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "TQMA8MXNL_VCC3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/* global autoconfigured region for contiguous allocations */
linux,cma {
compatible = "shared-dma-pool";
reusable;
/* 640 MiB */
size = <0 0x28000000>;
/* 1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
alloc-ranges = <0 0x40000000 0 0x78000000>;
linux,cma-default;
};
};
};
&A53_0 {
cpu-supply = <&buck2_reg>;
};
&flexspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexspi>;
status = "okay";
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <84000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
sensor0: temperature-sensor-eeprom@1b {
compatible = "nxp,se97", "jedec,jc-42.4-temp";
reg = <0x1b>;
};
pca9450: pmic@25 {
compatible = "nxp,pca9450a";
reg = <0x25>;
/* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
pinctrl-0 = <&pinctrl_pmic>;
pinctrl-names = "default";
interrupt-parent = <&gpio1>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
regulators {
/* V_0V85_SOC: 0.85 .. 0.95 */
buck1_reg: BUCK1 {
regulator-name = "BUCK1";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <950000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
/* VDD_ARM */
buck2_reg: BUCK2 {
regulator-name = "BUCK2";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
nxp,dvs-run-voltage = <950000>;
nxp,dvs-standby-voltage = <850000>;
regulator-ramp-delay = <3125>;
};
/* V_0V85_GPU / DRAM: shall be equal to BUCK1 for i.MX8MN */
buck3_reg: BUCK3 {
regulator-name = "BUCK3";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <950000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
/* VCC3V3 -> VMMC, ... must not be changed */
buck4_reg: BUCK4 {
regulator-name = "BUCK4";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
/* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
buck5_reg: BUCK5 {
regulator-name = "BUCK5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
/* V_1V1 -> RAM, ... must not be changed */
buck6_reg: BUCK6 {
regulator-name = "BUCK6";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-boot-on;
regulator-always-on;
};
/* V_1V8_SNVS */
ldo1_reg: LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
/* V_0V8_SNVS */
ldo2_reg: LDO2 {
regulator-name = "LDO2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <850000>;
regulator-boot-on;
regulator-always-on;
};
/* V_1V8_ANA */
ldo3_reg: LDO3 {
regulator-name = "LDO3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
/* V_0V9_MIPI */
ldo4_reg: LDO4 {
regulator-name = "LDO4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
regulator-always-on;
};
/* VCC SD IO - switched using SD2 VSELECT */
ldo5_reg: LDO5 {
regulator-name = "LDO5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
};
};
pcf85063: rtc@51 {
compatible = "nxp,pcf85063a";
reg = <0x51>;
quartz-load-femtofarads = <7000>;
};
eeprom1: eeprom@53 {
compatible = "nxp,se97b", "atmel,24c02";
read-only;
reg = <0x53>;
pagesize = <16>;
};
eeprom0: eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
pagesize = <32>;
};
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
non-removable;
no-sd;
no-sdio;
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc1v8>;
status = "okay";
};
/*
* Attention:
* wdog reset is routed to PMIC, PMIC must be preconfigured to force POR
* without LDO for SNVS. GPIO1_IO02 must not be used as GPIO.
*/
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl_flexspi: flexspigrp {
fsl,pins = <MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x84>,
<MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x84>,
<MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x84>,
<MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x84>,
<MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x84>,
<MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x84>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c4>,
<MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c4>;
};
pinctrl_i2c1_gpio: i2c1gpiogrp {
fsl,pins = <MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14 0x400001c4>,
<MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15 0x400001c4>;
};
pinctrl_pmic: pmicgrp {
fsl,pins = <MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x84>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x84>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d4>,
<MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2>,
<MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4>,
<MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4>,
<MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4>,
<MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4>,
<MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4>,
<MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4>,
<MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4>,
<MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4>,
<MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84>,
<MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B 0x84>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d2>,
<MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2>,
<MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4>,
<MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4>,
<MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4>,
<MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4>,
<MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4>,
<MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4>,
<MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4>,
<MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4>,
<MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84>,
<MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B 0x84>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x1d6>,
<MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d2>,
<MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4>,
<MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4>,
<MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4>,
<MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4>,
<MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4>,
<MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4>,
<MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4>,
<MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4>,
<MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x84>,
<MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B 0x84>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x84>;
};
};

29
arch/arm64/boot/dts/freescale/imx8mn.dtsi
Просмотреть файл

@ -63,6 +63,12 @@
clock-latency = <61036>;
clocks = <&clk IMX8MN_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
nvmem-cells = <&cpu_speed_grade>;
@ -78,6 +84,12 @@
clock-latency = <61036>;
clocks = <&clk IMX8MN_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
@ -91,6 +103,12 @@
clock-latency = <61036>;
clocks = <&clk IMX8MN_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
@ -104,6 +122,12 @@
clock-latency = <61036>;
clocks = <&clk IMX8MN_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
@ -112,6 +136,10 @@
A53_L2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-size = <0x80000>;
cache-line-size = <64>;
cache-sets = <512>;
};
};
@ -948,7 +976,6 @@
fsl,num-rx-queues = <3>;
nvmem-cells = <&fec_mac_address>;
nvmem-cell-names = "mac-address";
nvmem_macaddr_swap;
fsl,stop-mode = <&gpr 0x10 3>;
status = "disabled";
};

73
arch/arm64/boot/dts/freescale/imx8mp-evk.dts
Просмотреть файл

@ -86,6 +86,9 @@
pinctrl-0 = <&pinctrl_eqos>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
snps,force_thresh_dma_mode;
snps,mtl-tx-config = <&mtl_tx_setup>;
snps,mtl-rx-config = <&mtl_rx_setup>;
status = "okay";
mdio {
@ -97,6 +100,75 @@
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
eee-broken-1000t;
reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <80000>;
realtek,clkout-disable;
};
};
mtl_tx_setup: tx-queues-config {
snps,tx-queues-to-use = <5>;
snps,tx-sched-sp;
queue0 {
snps,dcb-algorithm;
snps,priority = <0x1>;
};
queue1 {
snps,dcb-algorithm;
snps,priority = <0x2>;
};
queue2 {
snps,dcb-algorithm;
snps,priority = <0x4>;
};
queue3 {
snps,dcb-algorithm;
snps,priority = <0x8>;
};
queue4 {
snps,dcb-algorithm;
snps,priority = <0xf0>;
};
};
mtl_rx_setup: rx-queues-config {
snps,rx-queues-to-use = <5>;
snps,rx-sched-sp;
queue0 {
snps,dcb-algorithm;
snps,priority = <0x1>;
snps,map-to-dma-channel = <0>;
};
queue1 {
snps,dcb-algorithm;
snps,priority = <0x2>;
snps,map-to-dma-channel = <1>;
};
queue2 {
snps,dcb-algorithm;
snps,priority = <0x4>;
snps,map-to-dma-channel = <2>;
};
queue3 {
snps,dcb-algorithm;
snps,priority = <0x8>;
snps,map-to-dma-channel = <3>;
};
queue4 {
snps,dcb-algorithm;
snps,priority = <0xf0>;
snps,map-to-dma-channel = <4>;
};
};
};
@ -120,6 +192,7 @@
reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <80000>;
realtek,clkout-disable;
};
};
};

35
arch/arm64/boot/dts/freescale/imx8mp.dtsi
Просмотреть файл

@ -51,6 +51,12 @@
clock-latency = <61036>;
clocks = <&clk IMX8MP_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
#cooling-cells = <2>;
};
@ -62,6 +68,12 @@
clock-latency = <61036>;
clocks = <&clk IMX8MP_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
#cooling-cells = <2>;
};
@ -73,6 +85,12 @@
clock-latency = <61036>;
clocks = <&clk IMX8MP_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
#cooling-cells = <2>;
};
@ -84,12 +102,22 @@
clock-latency = <61036>;
clocks = <&clk IMX8MP_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
#cooling-cells = <2>;
};
A53_L2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-size = <0x80000>;
cache-line-size = <64>;
cache-sets = <512>;
};
};
@ -369,6 +397,10 @@
eth_mac1: mac-address@90 {
reg = <0x90 6>;
};
eth_mac2: mac-address@96 {
reg = <0x96 6>;
};
};
anatop: anatop@30360000 {
@ -832,7 +864,6 @@
nvmem-cells = <&eth_mac1>;
nvmem-cell-names = "mac-address";
fsl,stop-mode = <&gpr 0x10 3>;
nvmem_macaddr_swap;
status = "disabled";
};
@ -854,6 +885,8 @@
<&clk IMX8MP_SYS_PLL2_100M>,
<&clk IMX8MP_SYS_PLL2_125M>;
assigned-clock-rates = <0>, <100000000>, <125000000>;
nvmem-cells = <&eth_mac2>;
nvmem-cell-names = "mac-address";
intf_mode = <&gpr 0x4>;
status = "disabled";
};

9
arch/arm64/boot/dts/freescale/imx8mq-evk.dts
Просмотреть файл

@ -169,6 +169,11 @@
reg = <0>;
reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
qca,disable-smarteee;
vddio-supply = <&vddh>;
vddh: vddh-regulator {
};
};
};
};
@ -326,6 +331,10 @@
power-supply = <&sw1a_reg>;
};
&pgc_vpu {
power-supply = <&sw1c_reg>;
};
&qspi0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi>;

25
arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
Просмотреть файл

@ -1,14 +1,9 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (C) 2020 Purism SPC <kernel@puri.sm>
// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
/dts-v1/;
#include "imx8mq-librem5.dtsi"
/ {
model = "Purism Librem 5r3";
compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq";
};
#include "imx8mq-librem5-r3.dtsi"
&a53_opp_table {
opp-1000000000 {
@ -16,22 +11,6 @@
};
};
&accel_gyro {
mount-matrix = "1", "0", "0",
"0", "1", "0",
"0", "0", "-1";
};
&bq25895 {
ti,battery-regulation-voltage = <4200000>; /* uV */
ti,charge-current = <1500000>; /* uA */
ti,termination-current = <144000>; /* uA */
};
&buck3_reg {
regulator-always-on;
};
&proximity {
proximity-near-level = <25>;
};

45
arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi Normal file
Просмотреть файл

@ -0,0 +1,45 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
/dts-v1/;
/*
* This file describes hardware that is shared among r3 ("Dogwood") and
* later revisions of the Librem 5 so it has to be included in dts there.
*/
#include "imx8mq-librem5.dtsi"
/ {
model = "Purism Librem 5r3";
compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq";
};
&accel_gyro {
mount-matrix = "1", "0", "0",
"0", "1", "0",
"0", "0", "-1";
};
&bq25895 {
ti,battery-regulation-voltage = <4200000>; /* uV */
ti,charge-current = <1500000>; /* uA */
ti,termination-current = <144000>; /* uA */
};
&camera_front {
pinctrl-0 = <&pinctrl_csi1>, <&pinctrl_r3_camera_pwr>;
shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
};
&iomuxc {
pinctrl_r3_camera_pwr: r3camerapwrgrp {
fsl,pins = <
MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4 0x83
>;
};
};
&proximity {
proximity-near-level = <25>;
};

16
arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
Просмотреть файл

@ -1,31 +1,19 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (C) 2020 Purism SPC <kernel@puri.sm>
// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
/dts-v1/;
#include "imx8mq-librem5.dtsi"
#include "imx8mq-librem5-r3.dtsi"
/ {
model = "Purism Librem 5r4";
compatible = "purism,librem5r4", "purism,librem5", "fsl,imx8mq";
};
&accel_gyro {
mount-matrix = "1", "0", "0",
"0", "1", "0",
"0", "0", "-1";
};
&bat {
maxim,rsns-microohm = <1667>;
};
&bq25895 {
ti,battery-regulation-voltage = <4200000>; /* uV */
ti,charge-current = <1500000>; /* uA */
ti,termination-current = <144000>; /* uA */
};
&led_backlight {
led-max-microamp = <25000>;
};

97
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
Просмотреть файл

@ -14,6 +14,7 @@
/ {
model = "Purism Librem 5";
compatible = "purism,librem5", "fsl,imx8mq";
chassis-type = "handset";
backlight_dsi: backlight-dsi {
compatible = "led-backlight";
@ -62,6 +63,40 @@
enable-active-high;
};
/*
* the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC
* since we can't have it twice in the 2 different regulator nodes.
*/
reg_csi_1v8: regulator-csi-1v8 {
compatible = "regulator-fixed";
regulator-name = "CAMERA_VDDIO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&reg_vdd_3v3>;
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
/* controlled by the CAMERA_POWER_KEY HKS */
reg_vcam_1v2: regulator-vcam-1v2 {
compatible = "regulator-fixed";
regulator-name = "CAMERA_VDDD_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
vin-supply = <&reg_vdd_1v8>;
enable-active-high;
};
reg_vcam_2v8: regulator-vcam-2v8 {
compatible = "regulator-fixed";
regulator-name = "CAMERA_VDDA_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
vin-supply = <&reg_vdd_3v3>;
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_gnss: regulator-gnss {
compatible = "regulator-fixed";
pinctrl-names = "default";
@ -237,6 +272,10 @@
cpu-supply = <&buck2_reg>;
};
&csi1 {
status = "okay";
};
&ddrc {
operating-points-v2 = <&ddrc_opp_table>;
@ -329,6 +368,20 @@
>;
};
pinctrl_camera_pwr: camerapwrgrp {
fsl,pins = <
/* CAMERA_PWR_EN_3V3 */
MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x83
>;
};
pinctrl_csi1: csi1grp {
fsl,pins = <
/* CSI1_NRST */
MX8MQ_IOMUXC_ENET_RXC_GPIO1_IO25 0x83
>;
};
pinctrl_charger_in: chargeringrp {
fsl,pins = <
/* CHRG_INT */
@ -725,7 +778,7 @@
compatible = "rohm,bd71837";
reg = <0x4b>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>;
clocks = <&pmic_osc>;
clock-names = "osc";
clock-output-names = "pmic_clk";
@ -958,6 +1011,31 @@
>;
};
camera_front: camera@20 {
compatible = "hynix,hi846";
reg = <0x20>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_csi1>;
clocks = <&clk IMX8MQ_CLK_CLKO2>;
assigned-clocks = <&clk IMX8MQ_CLK_CLKO2>;
assigned-clock-rates = <25000000>;
reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
vdda-supply = <&reg_vcam_2v8>;
vddd-supply = <&reg_vcam_1v2>;
vddio-supply = <&reg_csi_1v8>;
rotation = <90>;
orientation = <0>;
port {
camera1_ep: endpoint {
data-lanes = <1 2>;
link-frequencies = /bits/ 64
<80000000 200000000 300000000>;
remote-endpoint = <&mipi1_sensor_ep>;
};
};
};
backlight@36 {
compatible = "ti,lm36922";
reg = <0x36>;
@ -1031,6 +1109,23 @@
status = "okay";
};
&mipi_csi1 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
ports {
port@1 {
reg = <1>;
mipi1_sensor_ep: endpoint {
remote-endpoint = <&camera1_ep>;
data-lanes = <1 2>;
};
};
};
};
&mipi_dsi {
#address-cells = <1>;
#size-cells = <0>;

1
arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
Просмотреть файл

@ -12,6 +12,7 @@
/ {
model = "MNT Reform 2";
compatible = "mntre,reform2", "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq";
chassis-type = "laptop";
pcie1_refclk: clock-pcie1-refclk {
compatible = "fixed-clock";

15
arch/arm64/boot/dts/freescale/imx8mq-nitrogen-som.dtsi
Просмотреть файл

@ -69,6 +69,9 @@
reg = <4>;
interrupt-parent = <&gpio1>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <300>;
};
};
};
@ -191,20 +194,20 @@
MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0xd1
MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x59
MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0xd1
MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x1
MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x41
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000022
MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000022
>;
};

349
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts Normal file
Просмотреть файл

@ -0,0 +1,349 @@
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Copyright 2019-2021 TQ-Systems GmbH
*/
/dts-v1/;
#include "imx8mq-tqma8mq.dtsi"
#include "mba8mx.dtsi"
/ {
model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx";
compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq";
aliases {
eeprom0 = &eeprom3;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
rtc0 = &pcf85063;
rtc1 = &snvs_rtc;
};
extcon_usbotg: extcon-usbotg0 {
compatible = "linux,extcon-usb-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon0>;
id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
pcie0_refclk: pcie0-refclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
};
pcie1_refclk: pcie1-refclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
};
reg_otg_vbus: regulator-otg-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_regotgvbus>;
regulator-name = "MBA8MQ_OTG_VBUS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usdhc2_vmmc: regulator-vmmc {
compatible = "regulator-fixed";
regulator-name = "VSD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&btn2 {
gpios = <&gpio3 17 GPIO_ACTIVE_LOW>;
};
&gpio_leds {
led3 {
label = "led3";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
};
&i2c1 {
expander2: gpio@25 {
compatible = "nxp,pca9555";
reg = <0x25>;
gpio-controller;
#gpio-cells = <2>;
vcc-supply = <&reg_vcc_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_expander>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
mpcie-rst-hog {
gpio-hog;
gpios = <13 0>;
output-high;
line-name = "MPCIE_RST#";
};
};
};
&irqsteer {
status = "okay";
};
&led2 {
gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
};
&pcie0 {
reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
<&clk IMX8MQ_CLK_PCIE1_AUX>,
<&clk IMX8MQ_CLK_PCIE1_PHY>,
<&pcie0_refclk>;
clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
epdev_on-supply = <&reg_vcc_3v3>;
hard-wired = <1>;
status = "okay";
};
/*
* miniPCIe, also usable for cards with USB. Therefore configure the reset as
* static gpio hog.
*/
&pcie1 {
clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
<&clk IMX8MQ_CLK_PCIE2_AUX>,
<&clk IMX8MQ_CLK_PCIE2_PHY>,
<&pcie1_refclk>;
clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
epdev_on-supply = <&reg_vcc_3v3>;
hard-wired = <1>;
status = "okay";
};
&sai3 {
assigned-clocks = <&clk IMX8MQ_CLK_SAI3>;
assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
clocks = <&clk IMX8MQ_CLK_SAI3_IPG>, <&clk IMX8MQ_CLK_DUMMY>,
<&clk IMX8MQ_CLK_SAI3_ROOT>, <&clk IMX8MQ_CLK_DUMMY>,
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_AUDIO_PLL1_OUT>,
<&clk IMX8MQ_AUDIO_PLL2_OUT>;
};
&tlv320aic3x04 {
clock-names = "mclk";
clocks = <&clk IMX8MQ_CLK_SAI3_ROOT>;
};
&uart1 {
assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
};
&uart2 {
assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
};
/* console */
&uart3 {
assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
};
&usb3_phy0 {
vbus-supply = <&reg_otg_vbus>;
status = "okay";
};
&usb_dwc3_0 {
/* we implement dual role but not full featured OTG */
extcon = <&extcon_usbotg>;
hnp-disable;
srp-disable;
adp-disable;
/* OC not supported due to non matching active polarity */
disable-over-current;
dr_mode = "otg";
status = "okay";
};
&usb3_phy1 {
status = "okay";
};
&usb_dwc3_1 {
status = "okay";
dr_mode = "host";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <MX8MQ_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x0000004e>,
<MX8MQ_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x0000004e>,
<MX8MQ_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x0000004e>,
<MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x0000004e>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x0000004e>,
<MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x0000004e>,
<MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x0000004e>,
<MX8MQ_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x0000004e>;
};
pinctrl_expander: expandergrp {
fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0xd6>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3>,
<MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23>,
<MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f>,
<MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f>,
<MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f>,
<MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f>,
<MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91>,
<MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91>,
<MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91>,
<MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91>,
<MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f>,
<MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91>,
<MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91>,
<MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f>;
};
pinctrl_gpiobutton: gpiobuttongrp {
fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41>,
<MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x41>,
<MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x41>;
};
pinctrl_gpioled: gpioledgrp {
fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x41>,
<MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41>,
<MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x41>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x40000067>,
<MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x40000067>;
};
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <MX8MQ_IOMUXC_I2C2_SCL_GPIO5_IO16 0x40000067>,
<MX8MQ_IOMUXC_I2C2_SDA_GPIO5_IO17 0x40000067>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000067>,
<MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000067>;
};
pinctrl_i2c3_gpio: i2c3gpiogrp {
fsl,pins = <MX8MQ_IOMUXC_I2C3_SCL_GPIO5_IO18 0x40000067>,
<MX8MQ_IOMUXC_I2C3_SDA_GPIO5_IO19 0x40000067>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO14_PWM3_OUT 0x16>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO15_PWM4_OUT 0x16>;
};
pinctrl_regotgvbus: reggotgvbusgrp {
/* USB1 OTG PWR as GPIO */
fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x06>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0xc1>;
};
pinctrl_sai3: sai3grp {
fsl,pins = <MX8MQ_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6>,
<MX8MQ_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0xd6>,
<MX8MQ_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0xd6>,
<MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6>,
<MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6>,
<MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6>,
<MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x79>,
<MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x79>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x79>,
<MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x79>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x79>,
<MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x79>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <MX8MQ_IOMUXC_UART4_RXD_UART4_DCE_RX 0x79>,
<MX8MQ_IOMUXC_UART4_TXD_UART4_DCE_TX 0x79>;
};
pinctrl_usbcon0: usb0congrp {
/* ID: floating / high: device, low: host -> use PU */
fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xe6>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83>,
<MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3>,
<MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3>,
<MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3>,
<MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3>,
<MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3>,
<MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85>,
<MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5>,
<MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5>,
<MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5>,
<MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5>,
<MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5>,
<MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f>,
<MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7>,
<MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7>,
<MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7>,
<MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7>,
<MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7>,
<MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1>;
};
pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
fsl,pins = <MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41>;
};
};

360
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi Normal file
Просмотреть файл

@ -0,0 +1,360 @@
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Copyright 2019-2021 TQ-Systems GmbH
*/
#include "imx8mq.dtsi"
/ {
model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ";
compatible = "tq,imx8mq-tqma8mq", "fsl,imx8mq";
memory@40000000 {
device_type = "memory";
/* our minimum RAM config will be 1024 MiB */
reg = <0x00000000 0x40000000 0 0x40000000>;
};
/* e-MMC IO, needed for HS modes */
reg_vcc1v8: regulator-vcc1v8 {
compatible = "regulator-fixed";
regulator-name = "TQMA8MX_VCC1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
reg_vcc3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "TQMA8MX_VCC3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_vdd_arm: regulator-vdd-arm {
compatible = "regulator-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dvfs>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1000000>;
regulator-name = "TQMa8Mx_DVFS";
regulator-type = "voltage";
regulator-settling-time-us = <150000>;
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
states = <900000 0x1 1000000 0x0>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/* global autoconfigured region for contiguous allocations */
linux,cma {
compatible = "shared-dma-pool";
reusable;
/* 640 MiB */
size = <0 0x28000000>;
/* 1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
alloc-ranges = <0 0x40000000 0 0x78000000>;
linux,cma-default;
};
};
};
&A53_0 {
cpu-supply = <&reg_vdd_arm>;
};
&A53_1 {
cpu-supply = <&reg_vdd_arm>;
};
&A53_2 {
cpu-supply = <&reg_vdd_arm>;
};
&A53_3 {
cpu-supply = <&reg_vdd_arm>;
};
&gpu {
status = "okay";
};
&pgc_gpu {
power-supply = <&sw1a_reg>;
};
&pgc_vpu {
power-supply = <&sw1c_reg>;
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
pfuze100: pmic@8 {
compatible = "fsl,pfuze100";
fsl,pfuze-support-disable-sw;
reg = <0x8>;
regulators {
/* VDD_GPU */
sw1a_reg: sw1ab {
regulator-min-microvolt = <825000>;
regulator-max-microvolt = <1100000>;
};
/* VDD_VPU */
sw1c_reg: sw1c {
regulator-min-microvolt = <825000>;
regulator-max-microvolt = <1100000>;
};
/* NVCC_DRAM */
sw2_reg: sw2 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
/* VDD_DRAM */
sw3a_reg: sw3ab {
regulator-min-microvolt = <825000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
/* 1.8 V for QSPI NOR, e-MMC IO, must not be changed */
nvcc_1v8_reg: sw4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-always-on;
};
/* not used */
vgen1_reg: vgen1 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
/* VDD_PHY_0V9 */
vgen2_reg: vgen2 {
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <975000>;
regulator-always-on;
};
/* VDD_PHY_1V8 */
vgen3_reg: vgen3 {
regulator-min-microvolt = <1675000>;
regulator-max-microvolt = <1975000>;
regulator-always-on;
};
/* VDDA_1V8 */
vgen4_reg: vgen4 {
regulator-min-microvolt = <1625000>;
regulator-max-microvolt = <1875000>;
regulator-always-on;
};
/* VDD_PHY_3V3 */
vgen5_reg: vgen5 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3625000>;
regulator-always-on;
};
/* not used */
vgen6_reg: vgen6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
};
};
sensor0: temperature-sensor-eeprom@1b {
compatible = "nxp,se97", "jedec,jc-42.4-temp";
reg = <0x1b>;
};
pcf85063: rtc@51 {
compatible = "nxp,pcf85063a";
reg = <0x51>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc>;
interrupt-names = "irq";
interrupt-parent = <&gpio1>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
quartz-load-femtofarads = <7000>;
clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
eeprom1: eeprom@53 {
compatible = "nxp,se97b", "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
read-only;
};
eeprom0: eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
pagesize = <32>;
};
};
&pcie0 {
/* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
vph-supply = <&vgen5_reg>;
};
&pcie1 {
/* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
vph-supply = <&vgen5_reg>;
};
&qspi0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi>;
assigned-clocks = <&clk IMX8MQ_CLK_QSPI>;
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>;
status = "okay";
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <84000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
};
};
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <8>;
non-removable;
no-sd;
no-sdio;
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc1v8>;
status = "okay";
};
&vpu {
status = "okay";
};
/* Attention: wdog reset forcing POR needs baseboard support */
&wdog1 {
status = "okay";
};
&iomuxc {
pinctrl_dvfs: dvfsgrp {
fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x16>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f>,
<MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f>;
};
pinctrl_i2c1_gpio: i2c1gpiogrp {
fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_GPIO5_IO14 0x40000074>,
<MX8MQ_IOMUXC_I2C1_SDA_GPIO5_IO15 0x40000074>;
};
pinctrl_qspi: qspigrp {
fsl,pins = <MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x97>,
<MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82>,
<MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x97>,
<MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x97>,
<MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x97>,
<MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x97>;
};
pinctrl_rtc: rtcgrp {
fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x41>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83>,
<MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3>,
<MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3>,
<MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3>,
<MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3>,
<MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3>,
<MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3>,
<MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3>,
<MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3>,
<MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3>,
<MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83>,
<MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1>;
};
pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85>,
<MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5>,
<MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5>,
<MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5>,
<MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5>,
<MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5>,
<MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5>,
<MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5>,
<MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5>,
<MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5>,
<MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85>,
<MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1>;
};
pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87>,
<MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7>,
<MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7>,
<MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7>,
<MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7>,
<MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7>,
<MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7>,
<MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7>,
<MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7>,
<MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7>,
<MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87>,
<MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6>;
};
};

109
arch/arm64/boot/dts/freescale/imx8mq.dtsi
Просмотреть файл

@ -102,6 +102,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MQ_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
@ -116,6 +122,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MQ_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
@ -128,6 +140,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MQ_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
@ -140,6 +158,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MQ_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
@ -147,6 +171,10 @@
A53_L2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-size = <0x100000>;
cache-line-size = <64>;
cache-sets = <1024>;
};
};
@ -429,49 +457,49 @@
clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
little-endian;
fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
fsl,tmu-calibration = <0x00000000 0x00000023
0x00000001 0x00000029
0x00000002 0x0000002f
0x00000003 0x00000035
0x00000004 0x0000003d
0x00000005 0x00000043
0x00000006 0x0000004b
0x00000007 0x00000051
0x00000008 0x00000057
0x00000009 0x0000005f
0x0000000a 0x00000067
0x0000000b 0x0000006f
fsl,tmu-calibration = <0x00000000 0x00000023>,
<0x00000001 0x00000029>,
<0x00000002 0x0000002f>,
<0x00000003 0x00000035>,
<0x00000004 0x0000003d>,
<0x00000005 0x00000043>,
<0x00000006 0x0000004b>,
<0x00000007 0x00000051>,
<0x00000008 0x00000057>,
<0x00000009 0x0000005f>,
<0x0000000a 0x00000067>,
<0x0000000b 0x0000006f>,
0x00010000 0x0000001b
0x00010001 0x00000023
0x00010002 0x0000002b
0x00010003 0x00000033
0x00010004 0x0000003b
0x00010005 0x00000043
0x00010006 0x0000004b
0x00010007 0x00000055
0x00010008 0x0000005d
0x00010009 0x00000067
0x0001000a 0x00000070
<0x00010000 0x0000001b>,
<0x00010001 0x00000023>,
<0x00010002 0x0000002b>,
<0x00010003 0x00000033>,
<0x00010004 0x0000003b>,
<0x00010005 0x00000043>,
<0x00010006 0x0000004b>,
<0x00010007 0x00000055>,
<0x00010008 0x0000005d>,
<0x00010009 0x00000067>,
<0x0001000a 0x00000070>,
0x00020000 0x00000017
0x00020001 0x00000023
0x00020002 0x0000002d
0x00020003 0x00000037
0x00020004 0x00000041
0x00020005 0x0000004b
0x00020006 0x00000057
0x00020007 0x00000063
0x00020008 0x0000006f
<0x00020000 0x00000017>,
<0x00020001 0x00000023>,
<0x00020002 0x0000002d>,
<0x00020003 0x00000037>,
<0x00020004 0x00000041>,
<0x00020005 0x0000004b>,
<0x00020006 0x00000057>,
<0x00020007 0x00000063>,
<0x00020008 0x0000006f>,
0x00030000 0x00000015
0x00030001 0x00000021
0x00030002 0x0000002d
0x00030003 0x00000039
0x00030004 0x00000045
0x00030005 0x00000053
0x00030006 0x0000005f
0x00030007 0x00000071>;
<0x00030000 0x00000015>,
<0x00030001 0x00000021>,
<0x00030002 0x0000002d>,
<0x00030003 0x00000039>,
<0x00030004 0x00000045>,
<0x00030005 0x00000053>,
<0x00030006 0x0000005f>,
<0x00030007 0x00000071>;
#thermal-sensor-cells = <1>;
};
@ -1292,7 +1320,6 @@
fsl,num-rx-queues = <3>;
nvmem-cells = <&fec_mac_address>;
nvmem-cell-names = "mac-address";
nvmem_macaddr_swap;
fsl,stop-mode = <&iomuxc_gpr 0x10 3>;
status = "disabled";
};

38
arch/arm64/boot/dts/freescale/imx8qm.dtsi
Просмотреть файл

@ -57,6 +57,12 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
};
@ -65,6 +71,12 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
};
@ -73,6 +85,12 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
};
@ -81,6 +99,12 @@
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
};
@ -89,6 +113,12 @@
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x0 0x100>;
enable-method = "psci";
i-cache-size = <0xC000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&A72_L2>;
};
@ -102,10 +132,18 @@
A53_L2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-size = <0x100000>;
cache-line-size = <64>;
cache-sets = <1024>;
};
A72_L2: l2-cache1 {
compatible = "cache";
cache-level = <2>;
cache-size = <0x100000>;
cache-line-size = <64>;
cache-sets = <1024>;
};
};

28
arch/arm64/boot/dts/freescale/imx8qxp.dtsi
Просмотреть файл

@ -58,6 +58,12 @@
compatible = "arm,cortex-a35";
reg = <0x0 0x0>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A35_L2>;
clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
operating-points-v2 = <&a35_opp_table>;
@ -69,6 +75,12 @@
compatible = "arm,cortex-a35";
reg = <0x0 0x1>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A35_L2>;
clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
operating-points-v2 = <&a35_opp_table>;
@ -80,6 +92,12 @@
compatible = "arm,cortex-a35";
reg = <0x0 0x2>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A35_L2>;
clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
operating-points-v2 = <&a35_opp_table>;
@ -91,6 +109,12 @@
compatible = "arm,cortex-a35";
reg = <0x0 0x3>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A35_L2>;
clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
operating-points-v2 = <&a35_opp_table>;
@ -99,6 +123,10 @@
A35_L2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-size = <0x80000>;
cache-line-size = <64>;
cache-sets = <1024>;
};
};

64
arch/arm64/boot/dts/freescale/imx8ulp-evk.dts Normal file
Просмотреть файл

@ -0,0 +1,64 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2021 NXP
*/
/dts-v1/;
#include "imx8ulp.dtsi"
/ {
model = "NXP i.MX8ULP EVK";
compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp";
chosen {
stdout-path = &lpuart5;
};
memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0 0x80000000>;
};
};
&lpuart5 {
/* console */
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_lpuart5>;
pinctrl-1 = <&pinctrl_lpuart5>;
status = "okay";
};
&usdhc0 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_usdhc0>;
pinctrl-1 = <&pinctrl_usdhc0>;
non-removable;
bus-width = <8>;
status = "okay";
};
&iomuxc1 {
pinctrl_lpuart5: lpuart5grp {
fsl,pins = <
MX8ULP_PAD_PTF14__LPUART5_TX 0x3
MX8ULP_PAD_PTF15__LPUART5_RX 0x3
>;
};
pinctrl_usdhc0: usdhc0grp {
fsl,pins = <
MX8ULP_PAD_PTD1__SDHC0_CMD 0x43
MX8ULP_PAD_PTD2__SDHC0_CLK 0x10042
MX8ULP_PAD_PTD10__SDHC0_D0 0x43
MX8ULP_PAD_PTD9__SDHC0_D1 0x43
MX8ULP_PAD_PTD8__SDHC0_D2 0x43
MX8ULP_PAD_PTD7__SDHC0_D3 0x43
MX8ULP_PAD_PTD6__SDHC0_D4 0x43
MX8ULP_PAD_PTD5__SDHC0_D5 0x43
MX8ULP_PAD_PTD4__SDHC0_D6 0x43
MX8ULP_PAD_PTD3__SDHC0_D7 0x43
MX8ULP_PAD_PTD11__SDHC0_DQS 0x10042
>;
};
};

978
arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h Executable file
Просмотреть файл

@ -0,0 +1,978 @@
/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
/*
* Copyright 2021 NXP
*/
#ifndef __DTS_IMX8ULP_PINFUNC_H
#define __DTS_IMX8ULP_PINFUNC_H
/*
* The pin function ID is a tuple of
* <mux_reg input_reg mux_mode input_val>
*/
#define MX8ULP_PAD_PTD0__PTD0 0x0000 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD0__I2S6_RX_BCLK 0x0000 0x0B44 0x7 0x1
#define MX8ULP_PAD_PTD0__SDHC0_RESET_B 0x0000 0x0000 0x8 0x0
#define MX8ULP_PAD_PTD0__FLEXSPI2_B_DQS 0x0000 0x0974 0x9 0x1
#define MX8ULP_PAD_PTD0__CLKOUT2 0x0000 0x0000 0xa 0x0
#define MX8ULP_PAD_PTD0__EPDC0_SDCLK_B 0x0000 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD0__LP_APD_DBG_MUX_0 0x0000 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD0__CLKOUT1 0x0000 0x0000 0xd 0x0
#define MX8ULP_PAD_PTD0__DEBUG_MUX0_0 0x0000 0x0000 0xe 0x0
#define MX8ULP_PAD_PTD0__DEBUG_MUX1_0 0x0000 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD1__PTD1 0x0004 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD1__I2S6_RX_FS 0x0004 0x0B48 0x7 0x1
#define MX8ULP_PAD_PTD1__SDHC0_CMD 0x0004 0x0000 0x8 0x0
#define MX8ULP_PAD_PTD1__FLEXSPI2_B_DATA7 0x0004 0x0970 0x9 0x1
#define MX8ULP_PAD_PTD1__EPDC0_SDCLK 0x0004 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD1__DPI0_PCLK 0x0004 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD1__LP_APD_DBG_MUX_1 0x0004 0x0000 0xd 0x0
#define MX8ULP_PAD_PTD1__DEBUG_MUX0_1 0x0004 0x0000 0xe 0x0
#define MX8ULP_PAD_PTD1__DEBUG_MUX1_1 0x0004 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD2__PTD2 0x0008 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD2__I2S6_RXD0 0x0008 0x0B34 0x7 0x1
#define MX8ULP_PAD_PTD2__SDHC0_CLK 0x0008 0x0000 0x8 0x0
#define MX8ULP_PAD_PTD2__FLEXSPI2_B_DATA6 0x0008 0x096C 0x9 0x1
#define MX8ULP_PAD_PTD2__EPDC0_SDLE 0x0008 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD2__DPI0_HSYNC 0x0008 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD2__LP_APD_DBG_MUX_2 0x0008 0x0000 0xd 0x0
#define MX8ULP_PAD_PTD2__DEBUG_MUX0_2 0x0008 0x0000 0xe 0x0
#define MX8ULP_PAD_PTD2__DEBUG_MUX1_2 0x0008 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD3__PTD3 0x000C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD3__I2S6_RXD1 0x000C 0x0B38 0x7 0x1
#define MX8ULP_PAD_PTD3__SDHC0_D7 0x000C 0x0000 0x8 0x0
#define MX8ULP_PAD_PTD3__FLEXSPI2_B_DATA5 0x000C 0x0968 0x9 0x1
#define MX8ULP_PAD_PTD3__EPDC0_GDSP 0x000C 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD3__DPI0_VSYNC 0x000C 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD3__LP_APD_DBG_MUX_3 0x000C 0x0000 0xd 0x0
#define MX8ULP_PAD_PTD3__DEBUG_MUX0_3 0x000C 0x0000 0xe 0x0
#define MX8ULP_PAD_PTD3__DEBUG_MUX1_3 0x000C 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD4__PTD4 0x0010 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD4__EXT_AUD_MCLK3 0x0010 0x0B14 0x4 0x1
#define MX8ULP_PAD_PTD4__SDHC0_VS 0x0010 0x0000 0x5 0x0
#define MX8ULP_PAD_PTD4__TPM8_CH5 0x0010 0x0B2C 0x6 0x1
#define MX8ULP_PAD_PTD4__I2S6_MCLK 0x0010 0x0000 0x7 0x0
#define MX8ULP_PAD_PTD4__SDHC0_D6 0x0010 0x0000 0x8 0x0
#define MX8ULP_PAD_PTD4__FLEXSPI2_B_DATA4 0x0010 0x0964 0x9 0x1
#define MX8ULP_PAD_PTD4__EPDC0_SDCE0 0x0010 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD4__DPI0_DE 0x0010 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD4__LP_APD_DBG_MUX_4 0x0010 0x0000 0xd 0x0
#define MX8ULP_PAD_PTD4__DEBUG_MUX0_4 0x0010 0x0000 0xe 0x0
#define MX8ULP_PAD_PTD4__DEBUG_MUX1_4 0x0010 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD5__PTD5 0x0014 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD5__SDHC0_CD 0x0014 0x0000 0x5 0x0
#define MX8ULP_PAD_PTD5__TPM8_CH4 0x0014 0x0B28 0x6 0x1
#define MX8ULP_PAD_PTD5__I2S6_TX_BCLK 0x0014 0x0B4C 0x7 0x1
#define MX8ULP_PAD_PTD5__SDHC0_D5 0x0014 0x0000 0x8 0x0
#define MX8ULP_PAD_PTD5__FLEXSPI2_B_SS0_B 0x0014 0x0000 0x9 0x0
#define MX8ULP_PAD_PTD5__FLEXSPI2_B_SCLK_B 0x0014 0x0000 0xa 0x0
#define MX8ULP_PAD_PTD5__EPDC0_D0 0x0014 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD5__DPI0_D0 0x0014 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD5__LP_APD_DBG_MUX_5 0x0014 0x0000 0xd 0x0
#define MX8ULP_PAD_PTD5__DEBUG_MUX0_5 0x0014 0x0000 0xe 0x0
#define MX8ULP_PAD_PTD5__DEBUG_MUX1_5 0x0014 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD6__PTD6 0x0018 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD6__SDHC0_WP 0x0018 0x0000 0x5 0x0
#define MX8ULP_PAD_PTD6__TPM8_CH3 0x0018 0x0B24 0x6 0x1
#define MX8ULP_PAD_PTD6__I2S6_TX_FS 0x0018 0x0B50 0x7 0x1
#define MX8ULP_PAD_PTD6__SDHC0_D4 0x0018 0x0000 0x8 0x0
#define MX8ULP_PAD_PTD6__FLEXSPI2_B_SCLK 0x0018 0x0978 0x9 0x1
#define MX8ULP_PAD_PTD6__EPDC0_D1 0x0018 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD6__DPI0_D1 0x0018 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD6__LP_APD_DBG_MUX_6 0x0018 0x0000 0xd 0x0
#define MX8ULP_PAD_PTD6__DEBUG_MUX0_6 0x0018 0x0000 0xe 0x0
#define MX8ULP_PAD_PTD6__DEBUG_MUX1_6 0x0018 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD7__PTD7 0x001C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD7__TPM8_CH2 0x001C 0x0B20 0x6 0x1
#define MX8ULP_PAD_PTD7__I2S6_TXD0 0x001C 0x0000 0x7 0x0
#define MX8ULP_PAD_PTD7__SDHC0_D3 0x001C 0x0000 0x8 0x0
#define MX8ULP_PAD_PTD7__FLEXSPI2_B_DATA3 0x001C 0x0960 0x9 0x1
#define MX8ULP_PAD_PTD7__EPDC0_D2 0x001C 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD7__DPI0_D2 0x001C 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD7__LP_APD_DBG_MUX_7 0x001C 0x0000 0xd 0x0
#define MX8ULP_PAD_PTD7__DEBUG_MUX0_7 0x001C 0x0000 0xe 0x0
#define MX8ULP_PAD_PTD7__DEBUG_MUX1_7 0x001C 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD8__PTD8 0x0020 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD8__TPM8_CH1 0x0020 0x0B1C 0x6 0x1
#define MX8ULP_PAD_PTD8__I2S6_TXD1 0x0020 0x0000 0x7 0x0
#define MX8ULP_PAD_PTD8__SDHC0_D2 0x0020 0x0000 0x8 0x0
#define MX8ULP_PAD_PTD8__FLEXSPI2_B_DATA2 0x0020 0x095C 0x9 0x1
#define MX8ULP_PAD_PTD8__EPDC0_D3 0x0020 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD8__DPI0_D3 0x0020 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD8__LP_APD_DBG_MUX_8 0x0020 0x0000 0xe 0x0
#define MX8ULP_PAD_PTD8__DEBUG_MUX1_8 0x0020 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD9__PTD9 0x0024 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD9__TPM8_CLKIN 0x0024 0x0B30 0x6 0x1
#define MX8ULP_PAD_PTD9__I2S6_TXD2 0x0024 0x0000 0x7 0x0
#define MX8ULP_PAD_PTD9__SDHC0_D1 0x0024 0x0000 0x8 0x0
#define MX8ULP_PAD_PTD9__FLEXSPI2_B_DATA1 0x0024 0x0958 0x9 0x1
#define MX8ULP_PAD_PTD9__EPDC0_D4 0x0024 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD9__DPI0_D4 0x0024 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD9__LP_APD_DBG_MUX_9 0x0024 0x0000 0xe 0x0
#define MX8ULP_PAD_PTD9__DEBUG_MUX1_9 0x0024 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD10__PTD10 0x0028 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD10__TPM8_CH0 0x0028 0x0B18 0x6 0x1
#define MX8ULP_PAD_PTD10__I2S6_TXD3 0x0028 0x0000 0x7 0x0
#define MX8ULP_PAD_PTD10__SDHC0_D0 0x0028 0x0000 0x8 0x0
#define MX8ULP_PAD_PTD10__FLEXSPI2_B_DATA0 0x0028 0x0954 0x9 0x1
#define MX8ULP_PAD_PTD10__EPDC0_D5 0x0028 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD10__DPI0_D5 0x0028 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD10__LP_APD_DBG_MUX_10 0x0028 0x0000 0xe 0x0
#define MX8ULP_PAD_PTD10__DEBUG_MUX1_10 0x0028 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD11__PTD11 0x002C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD11__TPM8_CH5 0x002C 0x0B2C 0x6 0x2
#define MX8ULP_PAD_PTD11__I2S6_RXD2 0x002C 0x0B3C 0x7 0x1
#define MX8ULP_PAD_PTD11__SDHC0_DQS 0x002C 0x0000 0x8 0x0
#define MX8ULP_PAD_PTD11__FLEXSPI2_B_SS0_B 0x002C 0x0000 0x9 0x0
#define MX8ULP_PAD_PTD11__FLEXSPI2_A_SS1_B 0x002C 0x0000 0xa 0x0
#define MX8ULP_PAD_PTD11__EPDC0_D6 0x002C 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD11__DPI0_D6 0x002C 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD11__LP_APD_DBG_MUX_11 0x002C 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD12__PTD12 0x0030 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD12__USB0_ID 0x0030 0x0AC8 0x5 0x1
#define MX8ULP_PAD_PTD12__SDHC2_D3 0x0030 0x0AA4 0x6 0x1
#define MX8ULP_PAD_PTD12__I2S7_RX_BCLK 0x0030 0x0B64 0x7 0x1
#define MX8ULP_PAD_PTD12__SDHC1_DQS 0x0030 0x0A84 0x8 0x1
#define MX8ULP_PAD_PTD12__FLEXSPI2_A_SS0_B 0x0030 0x0000 0x9 0x0
#define MX8ULP_PAD_PTD12__FLEXSPI2_B_SS1_B 0x0030 0x0000 0xa 0x0
#define MX8ULP_PAD_PTD12__EPDC0_D7 0x0030 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD12__DPI0_D7 0x0030 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD12__LP_APD_DBG_MUX_12 0x0030 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD13__PTD13 0x0034 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD13__SPDIF_IN3 0x0034 0x0B80 0x4 0x1
#define MX8ULP_PAD_PTD13__USB0_PWR 0x0034 0x0000 0x5 0x0
#define MX8ULP_PAD_PTD13__SDHC2_D2 0x0034 0x0AA0 0x6 0x1
#define MX8ULP_PAD_PTD13__I2S7_RX_FS 0x0034 0x0B68 0x7 0x1
#define MX8ULP_PAD_PTD13__SDHC1_RESET_B 0x0034 0x0000 0x8 0x0
#define MX8ULP_PAD_PTD13__FLEXSPI2_A_SCLK 0x0034 0x0000 0x9 0x0
#define MX8ULP_PAD_PTD13__CLKOUT2 0x0034 0x0000 0xa 0x0
#define MX8ULP_PAD_PTD13__EPDC0_D8 0x0034 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD13__DPI0_D8 0x0034 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD13__CLKOUT1 0x0034 0x0000 0xd 0x0
#define MX8ULP_PAD_PTD13__LP_APD_DBG_MUX_13 0x0034 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD14__PTD14 0x0038 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD14__SPDIF_OUT3 0x0038 0x0000 0x4 0x0
#define MX8ULP_PAD_PTD14__USB0_OC 0x0038 0x0AC0 0x5 0x1
#define MX8ULP_PAD_PTD14__SDHC2_D1 0x0038 0x0A9C 0x6 0x1
#define MX8ULP_PAD_PTD14__I2S7_RXD0 0x0038 0x0B54 0x7 0x1
#define MX8ULP_PAD_PTD14__SDHC1_D7 0x0038 0x0A80 0x8 0x1
#define MX8ULP_PAD_PTD14__FLEXSPI2_A_DATA3 0x0038 0x0000 0x9 0x0
#define MX8ULP_PAD_PTD14__TRACE0_D7 0x0038 0x0000 0xa 0x0
#define MX8ULP_PAD_PTD14__EPDC0_D9 0x0038 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD14__DPI0_D9 0x0038 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD14__LP_APD_DBG_MUX_14 0x0038 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD15__PTD15 0x003C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD15__SPDIF_IN2 0x003C 0x0B7C 0x4 0x1
#define MX8ULP_PAD_PTD15__SDHC1_VS 0x003C 0x0000 0x5 0x0
#define MX8ULP_PAD_PTD15__SDHC2_D0 0x003C 0x0A98 0x6 0x1
#define MX8ULP_PAD_PTD15__I2S7_TX_BCLK 0x003C 0x0B6C 0x7 0x1
#define MX8ULP_PAD_PTD15__SDHC1_D6 0x003C 0x0A7C 0x8 0x1
#define MX8ULP_PAD_PTD15__FLEXSPI2_A_DATA2 0x003C 0x0000 0x9 0x0
#define MX8ULP_PAD_PTD15__TRACE0_D6 0x003C 0x0000 0xa 0x0
#define MX8ULP_PAD_PTD15__EPDC0_D10 0x003C 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD15__DPI0_D10 0x003C 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD15__LP_APD_DBG_MUX_15 0x003C 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD16__PTD16 0x0040 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD16__FXIO1_D31 0x0040 0x08A0 0x2 0x1
#define MX8ULP_PAD_PTD16__LPSPI4_PCS1 0x0040 0x08F8 0x3 0x1
#define MX8ULP_PAD_PTD16__SPDIF_OUT2 0x0040 0x0000 0x4 0x0
#define MX8ULP_PAD_PTD16__SDHC1_CD 0x0040 0x0A58 0x5 0x1
#define MX8ULP_PAD_PTD16__SDHC2_CLK 0x0040 0x0A90 0x6 0x1
#define MX8ULP_PAD_PTD16__I2S7_TX_FS 0x0040 0x0B70 0x7 0x1
#define MX8ULP_PAD_PTD16__SDHC1_D5 0x0040 0x0A78 0x8 0x1
#define MX8ULP_PAD_PTD16__FLEXSPI2_A_DATA1 0x0040 0x0000 0x9 0x0
#define MX8ULP_PAD_PTD16__TRACE0_D5 0x0040 0x0000 0xa 0x0
#define MX8ULP_PAD_PTD16__EPDC0_D11 0x0040 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD16__DPI0_D11 0x0040 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD16__LP_APD_DBG_MUX_16 0x0040 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD17__PTD17 0x0044 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD17__FXIO1_D30 0x0044 0x089C 0x2 0x1
#define MX8ULP_PAD_PTD17__LPSPI4_PCS2 0x0044 0x08FC 0x3 0x1
#define MX8ULP_PAD_PTD17__EXT_AUD_MCLK3 0x0044 0x0B14 0x4 0x2
#define MX8ULP_PAD_PTD17__SDHC1_WP 0x0044 0x0A88 0x5 0x1
#define MX8ULP_PAD_PTD17__SDHC2_CMD 0x0044 0x0A94 0x6 0x1
#define MX8ULP_PAD_PTD17__I2S7_TXD0 0x0044 0x0000 0x7 0x0
#define MX8ULP_PAD_PTD17__SDHC1_D4 0x0044 0x0A74 0x8 0x1
#define MX8ULP_PAD_PTD17__FLEXSPI2_A_DATA0 0x0044 0x0000 0x9 0x0
#define MX8ULP_PAD_PTD17__TRACE0_D4 0x0044 0x0000 0xa 0x0
#define MX8ULP_PAD_PTD17__EPDC0_D12 0x0044 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD17__DPI0_D12 0x0044 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD17__LP_APD_DBG_MUX_17 0x0044 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD18__PTD18 0x0048 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD18__FXIO1_D29 0x0048 0x0894 0x2 0x1
#define MX8ULP_PAD_PTD18__LPSPI4_PCS3 0x0048 0x0900 0x3 0x1
#define MX8ULP_PAD_PTD18__SPDIF_CLK 0x0048 0x0000 0x4 0x0
#define MX8ULP_PAD_PTD18__EXT_AUD_MCLK3 0x0048 0x0B14 0x5 0x3
#define MX8ULP_PAD_PTD18__TPM8_CH0 0x0048 0x0B18 0x6 0x2
#define MX8ULP_PAD_PTD18__I2S7_MCLK 0x0048 0x0000 0x7 0x0
#define MX8ULP_PAD_PTD18__SDHC1_D3 0x0048 0x0A70 0x8 0x1
#define MX8ULP_PAD_PTD18__FLEXSPI2_A_DQS 0x0048 0x0000 0x9 0x0
#define MX8ULP_PAD_PTD18__TRACE0_D3 0x0048 0x0000 0xa 0x0
#define MX8ULP_PAD_PTD18__EPDC0_D13 0x0048 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD18__DPI0_D13 0x0048 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD18__LP_APD_DBG_MUX_18 0x0048 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD19__PTD19 0x004C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD19__FXIO1_D28 0x004C 0x0890 0x2 0x1
#define MX8ULP_PAD_PTD19__SPDIF_IN0 0x004C 0x0B74 0x4 0x1
#define MX8ULP_PAD_PTD19__TPM8_CH1 0x004C 0x0B1C 0x6 0x2
#define MX8ULP_PAD_PTD19__I2S6_RXD3 0x004C 0x0B40 0x7 0x1
#define MX8ULP_PAD_PTD19__SDHC1_D2 0x004C 0x0A6C 0x8 0x1
#define MX8ULP_PAD_PTD19__FLEXSPI2_A_DATA7 0x004C 0x0000 0x9 0x0
#define MX8ULP_PAD_PTD19__TRACE0_D2 0x004C 0x0000 0xa 0x0
#define MX8ULP_PAD_PTD19__EPDC0_D14 0x004C 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD19__DPI0_D14 0x004C 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD19__LP_APD_DBG_MUX_19 0x004C 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD20__PTD20 0x0050 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD20__FXIO1_D27 0x0050 0x088C 0x2 0x1
#define MX8ULP_PAD_PTD20__LPSPI4_SIN 0x0050 0x0908 0x3 0x1
#define MX8ULP_PAD_PTD20__SPDIF_OUT0 0x0050 0x0000 0x4 0x0
#define MX8ULP_PAD_PTD20__TPM8_CLKIN 0x0050 0x0B30 0x6 0x2
#define MX8ULP_PAD_PTD20__I2S7_RXD1 0x0050 0x0B58 0x7 0x1
#define MX8ULP_PAD_PTD20__SDHC1_D1 0x0050 0x0A68 0x8 0x1
#define MX8ULP_PAD_PTD20__FLEXSPI2_A_DATA6 0x0050 0x0000 0x9 0x0
#define MX8ULP_PAD_PTD20__TRACE0_D1 0x0050 0x0000 0xa 0x0
#define MX8ULP_PAD_PTD20__EPDC0_D15 0x0050 0x0000 0xb 0x0
#define MX8ULP_PAD_PTD20__DPI0_D15 0x0050 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD20__LP_APD_DBG_MUX_20 0x0050 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD21__PTD21 0x0054 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD21__FXIO1_D26 0x0054 0x0888 0x2 0x1
#define MX8ULP_PAD_PTD21__LPSPI4_SOUT 0x0054 0x090C 0x3 0x1
#define MX8ULP_PAD_PTD21__SPDIF_IN1 0x0054 0x0B78 0x4 0x1
#define MX8ULP_PAD_PTD21__USB1_PWR 0x0054 0x0000 0x5 0x0
#define MX8ULP_PAD_PTD21__TPM8_CH2 0x0054 0x0B20 0x6 0x2
#define MX8ULP_PAD_PTD21__I2S7_TXD1 0x0054 0x0000 0x7 0x0
#define MX8ULP_PAD_PTD21__SDHC1_D0 0x0054 0x0A64 0x8 0x1
#define MX8ULP_PAD_PTD21__FLEXSPI2_A_DATA5 0x0054 0x0000 0x9 0x0
#define MX8ULP_PAD_PTD21__TRACE0_D0 0x0054 0x0000 0xa 0x0
#define MX8ULP_PAD_PTD21__DPI0_D16 0x0054 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD21__WDOG5_RST 0x0054 0x0000 0xd 0x0
#define MX8ULP_PAD_PTD21__LP_APD_DBG_MUX_21 0x0054 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD22__PTD22 0x0058 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD22__FXIO1_D25 0x0058 0x0884 0x2 0x1
#define MX8ULP_PAD_PTD22__LPSPI4_SCK 0x0058 0x0904 0x3 0x1
#define MX8ULP_PAD_PTD22__SPDIF_OUT1 0x0058 0x0000 0x4 0x0
#define MX8ULP_PAD_PTD22__USB1_OC 0x0058 0x0AC4 0x5 0x1
#define MX8ULP_PAD_PTD22__TPM8_CH3 0x0058 0x0B24 0x6 0x2
#define MX8ULP_PAD_PTD22__I2S7_TXD2 0x0058 0x0000 0x7 0x0
#define MX8ULP_PAD_PTD22__SDHC1_CLK 0x0058 0x0A5C 0x8 0x1
#define MX8ULP_PAD_PTD22__FLEXSPI2_A_DATA4 0x0058 0x0000 0x9 0x0
#define MX8ULP_PAD_PTD22__TRACE0_CLKOUT 0x0058 0x0000 0xa 0x0
#define MX8ULP_PAD_PTD22__DPI0_D17 0x0058 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD22__LP_APD_DBG_MUX_22 0x0058 0x0000 0xf 0x0
#define MX8ULP_PAD_PTD23__PTD23 0x005C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTD23__FXIO1_D24 0x005C 0x0880 0x2 0x1
#define MX8ULP_PAD_PTD23__LPSPI4_PCS0 0x005C 0x08F4 0x3 0x1
#define MX8ULP_PAD_PTD23__USB1_ID 0x005C 0x0ACC 0x5 0x1
#define MX8ULP_PAD_PTD23__TPM8_CH4 0x005C 0x0B28 0x6 0x2
#define MX8ULP_PAD_PTD23__I2S7_TXD3 0x005C 0x0000 0x7 0x0
#define MX8ULP_PAD_PTD23__SDHC1_CMD 0x005C 0x0A60 0x8 0x1
#define MX8ULP_PAD_PTD23__FLEXSPI2_A_SS0_B 0x005C 0x0000 0x9 0x0
#define MX8ULP_PAD_PTD23__FLEXSPI2_A_SCLK_B 0x005C 0x0000 0xa 0x0
#define MX8ULP_PAD_PTD23__DPI0_D18 0x005C 0x0000 0xc 0x0
#define MX8ULP_PAD_PTD23__LP_APD_DBG_MUX_23 0x005C 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE0__PTE0 0x0080 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE0__FXIO1_D23 0x0080 0x087C 0x2 0x1
#define MX8ULP_PAD_PTE0__SPDIF_IN3 0x0080 0x0B80 0x3 0x2
#define MX8ULP_PAD_PTE0__LPUART4_CTS_B 0x0080 0x08DC 0x4 0x1
#define MX8ULP_PAD_PTE0__LPI2C4_SCL 0x0080 0x08C8 0x5 0x1
#define MX8ULP_PAD_PTE0__TPM8_CLKIN 0x0080 0x0B30 0x6 0x3
#define MX8ULP_PAD_PTE0__I2S7_RXD2 0x0080 0x0B5C 0x7 0x1
#define MX8ULP_PAD_PTE0__SDHC2_D1 0x0080 0x0A9C 0x8 0x2
#define MX8ULP_PAD_PTE0__FLEXSPI2_B_DQS 0x0080 0x0974 0x9 0x2
#define MX8ULP_PAD_PTE0__ENET0_CRS 0x0080 0x0AE8 0xa 0x1
#define MX8ULP_PAD_PTE0__DBI0_WRX 0x0080 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE0__DPI0_D19 0x0080 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE0__WUU1_P0 0x0080 0x0000 0xd 0x0
#define MX8ULP_PAD_PTE0__DEBUG_MUX0_8 0x0080 0x0000 0xe 0x0
#define MX8ULP_PAD_PTE0__DEBUG_MUX1_11 0x0080 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE1__PTE1 0x0084 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE1__FXIO1_D22 0x0084 0x0878 0x2 0x1
#define MX8ULP_PAD_PTE1__SPDIF_OUT3 0x0084 0x0000 0x3 0x0
#define MX8ULP_PAD_PTE1__LPUART4_RTS_B 0x0084 0x0000 0x4 0x0
#define MX8ULP_PAD_PTE1__LPI2C4_SDA 0x0084 0x08CC 0x5 0x1
#define MX8ULP_PAD_PTE1__TPM8_CH0 0x0084 0x0B18 0x6 0x3
#define MX8ULP_PAD_PTE1__I2S7_RXD3 0x0084 0x0B60 0x7 0x1
#define MX8ULP_PAD_PTE1__SDHC2_D0 0x0084 0x0A98 0x8 0x2
#define MX8ULP_PAD_PTE1__FLEXSPI2_B_DATA7 0x0084 0x0970 0x9 0x2
#define MX8ULP_PAD_PTE1__ENET0_COL 0x0084 0x0AE4 0xa 0x1
#define MX8ULP_PAD_PTE1__DBI0_CSX 0x0084 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE1__DPI0_D20 0x0084 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE1__WUU1_P1 0x0084 0x0000 0xd 0x0
#define MX8ULP_PAD_PTE1__DEBUG_MUX0_9 0x0084 0x0000 0xe 0x0
#define MX8ULP_PAD_PTE1__DEBUG_MUX1_12 0x0084 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE2__PTE2 0x0088 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE2__FXIO1_D21 0x0088 0x0874 0x2 0x1
#define MX8ULP_PAD_PTE2__SPDIF_IN2 0x0088 0x0B7C 0x3 0x2
#define MX8ULP_PAD_PTE2__LPUART4_TX 0x0088 0x08E4 0x4 0x1
#define MX8ULP_PAD_PTE2__LPI2C4_HREQ 0x0088 0x08C4 0x5 0x1
#define MX8ULP_PAD_PTE2__TPM8_CH1 0x0088 0x0B1C 0x6 0x3
#define MX8ULP_PAD_PTE2__EXT_AUD_MCLK3 0x0088 0x0B14 0x7 0x4
#define MX8ULP_PAD_PTE2__SDHC2_CLK 0x0088 0x0A90 0x8 0x2
#define MX8ULP_PAD_PTE2__FLEXSPI2_B_DATA6 0x0088 0x096C 0x9 0x2
#define MX8ULP_PAD_PTE2__ENET0_TXER 0x0088 0x0000 0xa 0x0
#define MX8ULP_PAD_PTE2__DBI0_DCX 0x0088 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE2__DPI0_D21 0x0088 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE2__LP_HV_DBG_MUX_0 0x0088 0x0000 0xd 0x0
#define MX8ULP_PAD_PTE2__DEBUG_MUX0_10 0x0088 0x0000 0xe 0x0
#define MX8ULP_PAD_PTE2__DEBUG_MUX1_13 0x0088 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE3__PTE3 0x008C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE3__FXIO1_D20 0x008C 0x0870 0x2 0x1
#define MX8ULP_PAD_PTE3__SPDIF_OUT2 0x008C 0x0000 0x3 0x0
#define MX8ULP_PAD_PTE3__LPUART4_RX 0x008C 0x08E0 0x4 0x1
#define MX8ULP_PAD_PTE3__TPM8_CH2 0x008C 0x0B20 0x6 0x3
#define MX8ULP_PAD_PTE3__I2S6_MCLK 0x008C 0x0000 0x7 0x0
#define MX8ULP_PAD_PTE3__SDHC2_CMD 0x008C 0x0A94 0x8 0x2
#define MX8ULP_PAD_PTE3__FLEXSPI2_B_DATA5 0x008C 0x0968 0x9 0x2
#define MX8ULP_PAD_PTE3__ENET0_TXCLK 0x008C 0x0B10 0xa 0x1
#define MX8ULP_PAD_PTE3__DBI0_RWX 0x008C 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE3__DPI0_D22 0x008C 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE3__WUU1_P2 0x008C 0x0000 0xd 0x0
#define MX8ULP_PAD_PTE3__DEBUG_MUX0_11 0x008C 0x0000 0xe 0x0
#define MX8ULP_PAD_PTE3__DEBUG_MUX1_14 0x008C 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE4__PTE4 0x0090 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE4__FXIO1_D19 0x0090 0x0868 0x2 0x1
#define MX8ULP_PAD_PTE4__SPDIF_CLK 0x0090 0x0000 0x3 0x0
#define MX8ULP_PAD_PTE4__LPUART5_CTS_B 0x0090 0x08E8 0x4 0x1
#define MX8ULP_PAD_PTE4__LPI2C5_SCL 0x0090 0x08D4 0x5 0x1
#define MX8ULP_PAD_PTE4__TPM8_CH3 0x0090 0x0B24 0x6 0x3
#define MX8ULP_PAD_PTE4__I2S6_RX_BCLK 0x0090 0x0B44 0x7 0x2
#define MX8ULP_PAD_PTE4__SDHC2_D3 0x0090 0x0AA4 0x8 0x2
#define MX8ULP_PAD_PTE4__FLEXSPI2_B_DATA4 0x0090 0x0964 0x9 0x2
#define MX8ULP_PAD_PTE4__ENET0_TXD3 0x0090 0x0000 0xa 0x0
#define MX8ULP_PAD_PTE4__DBI0_E 0x0090 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE4__DPI0_D23 0x0090 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE4__WUU1_P3 0x0090 0x0000 0xd 0x0
#define MX8ULP_PAD_PTE4__DEBUG_MUX0_12 0x0090 0x0000 0xe 0x0
#define MX8ULP_PAD_PTE4__DEBUG_MUX1_15 0x0090 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE5__PTE5 0x0094 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE5__FXIO1_D18 0x0094 0x0864 0x2 0x1
#define MX8ULP_PAD_PTE5__SPDIF_IN0 0x0094 0x0B74 0x3 0x2
#define MX8ULP_PAD_PTE5__LPUART5_RTS_B 0x0094 0x0000 0x4 0x0
#define MX8ULP_PAD_PTE5__LPI2C5_SDA 0x0094 0x08D8 0x5 0x1
#define MX8ULP_PAD_PTE5__TPM8_CH4 0x0094 0x0B28 0x6 0x3
#define MX8ULP_PAD_PTE5__I2S6_RX_FS 0x0094 0x0B48 0x7 0x2
#define MX8ULP_PAD_PTE5__SDHC2_D2 0x0094 0x0AA0 0x8 0x2
#define MX8ULP_PAD_PTE5__FLEXSPI2_B_SS0_B 0x0094 0x0000 0x9 0x0
#define MX8ULP_PAD_PTE5__ENET0_TXD2 0x0094 0x0000 0xa 0x0
#define MX8ULP_PAD_PTE5__DBI0_D0 0x0094 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE5__LP_HV_DBG_MUX_1 0x0094 0x0000 0xd 0x0
#define MX8ULP_PAD_PTE5__DEBUG_MUX0_13 0x0094 0x0000 0xe 0x0
#define MX8ULP_PAD_PTE5__DEBUG_MUX1_16 0x0094 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE6__PTE6 0x0098 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE6__FXIO1_D17 0x0098 0x0860 0x2 0x1
#define MX8ULP_PAD_PTE6__SPDIF_OUT0 0x0098 0x0000 0x3 0x0
#define MX8ULP_PAD_PTE6__LPUART5_TX 0x0098 0x08F0 0x4 0x1
#define MX8ULP_PAD_PTE6__LPI2C5_HREQ 0x0098 0x08D0 0x5 0x1
#define MX8ULP_PAD_PTE6__TPM8_CH5 0x0098 0x0B2C 0x6 0x3
#define MX8ULP_PAD_PTE6__I2S6_RXD0 0x0098 0x0B34 0x7 0x2
#define MX8ULP_PAD_PTE6__SDHC2_D4 0x0098 0x0AA8 0x8 0x1
#define MX8ULP_PAD_PTE6__FLEXSPI2_B_SCLK 0x0098 0x0978 0x9 0x2
#define MX8ULP_PAD_PTE6__ENET0_RXCLK 0x0098 0x0B0C 0xa 0x1
#define MX8ULP_PAD_PTE6__DBI0_D1 0x0098 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE6__LP_HV_DBG_MUX_2 0x0098 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE6__WDOG5_RST 0x0098 0x0000 0xd 0x0
#define MX8ULP_PAD_PTE6__DEBUG_MUX0_14 0x0098 0x0000 0xe 0x0
#define MX8ULP_PAD_PTE6__DEBUG_MUX1_17 0x0098 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE7__PTE7 0x009C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE7__FXIO1_D16 0x009C 0x085C 0x2 0x1
#define MX8ULP_PAD_PTE7__SPDIF_IN1 0x009C 0x0B78 0x3 0x2
#define MX8ULP_PAD_PTE7__LPUART5_RX 0x009C 0x08EC 0x4 0x1
#define MX8ULP_PAD_PTE7__LPI2C6_HREQ 0x009C 0x09B4 0x5 0x1
#define MX8ULP_PAD_PTE7__TPM4_CLKIN 0x009C 0x081C 0x6 0x1
#define MX8ULP_PAD_PTE7__I2S6_RXD1 0x009C 0x0B38 0x7 0x2
#define MX8ULP_PAD_PTE7__SDHC2_D5 0x009C 0x0AAC 0x8 0x1
#define MX8ULP_PAD_PTE7__FLEXSPI2_B_DATA3 0x009C 0x0960 0x9 0x2
#define MX8ULP_PAD_PTE7__ENET0_RXD3 0x009C 0x0B04 0xa 0x1
#define MX8ULP_PAD_PTE7__DBI0_D2 0x009C 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE7__EPDC0_BDR1 0x009C 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE7__WUU1_P4 0x009C 0x0000 0xd 0x0
#define MX8ULP_PAD_PTE7__DEBUG_MUX0_15 0x009C 0x0000 0xe 0x0
#define MX8ULP_PAD_PTE7__DEBUG_MUX1_18 0x009C 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE8__PTE8 0x00A0 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE8__FXIO1_D15 0x00A0 0x0858 0x2 0x1
#define MX8ULP_PAD_PTE8__LPSPI4_PCS1 0x00A0 0x08F8 0x3 0x2
#define MX8ULP_PAD_PTE8__LPUART6_CTS_B 0x00A0 0x09CC 0x4 0x1
#define MX8ULP_PAD_PTE8__LPI2C6_SCL 0x00A0 0x09B8 0x5 0x1
#define MX8ULP_PAD_PTE8__TPM4_CH0 0x00A0 0x0804 0x6 0x1
#define MX8ULP_PAD_PTE8__I2S6_RXD2 0x00A0 0x0B3C 0x7 0x2
#define MX8ULP_PAD_PTE8__SDHC2_D6 0x00A0 0x0AB0 0x8 0x1
#define MX8ULP_PAD_PTE8__FLEXSPI2_B_DATA2 0x00A0 0x095C 0x9 0x2
#define MX8ULP_PAD_PTE8__ENET0_RXD2 0x00A0 0x0B00 0xa 0x1
#define MX8ULP_PAD_PTE8__DBI0_D3 0x00A0 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE8__EPDC0_BDR0 0x00A0 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE8__LP_HV_DBG_MUX_3 0x00A0 0x0000 0xe 0x0
#define MX8ULP_PAD_PTE8__DEBUG_MUX1_19 0x00A0 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE9__PTE9 0x00A4 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE9__FXIO1_D14 0x00A4 0x0854 0x2 0x1
#define MX8ULP_PAD_PTE9__LPSPI4_PCS2 0x00A4 0x08FC 0x3 0x2
#define MX8ULP_PAD_PTE9__LPUART6_RTS_B 0x00A4 0x0000 0x4 0x0
#define MX8ULP_PAD_PTE9__LPI2C6_SDA 0x00A4 0x09BC 0x5 0x1
#define MX8ULP_PAD_PTE9__TPM4_CH1 0x00A4 0x0808 0x6 0x1
#define MX8ULP_PAD_PTE9__I2S6_RXD3 0x00A4 0x0B40 0x7 0x2
#define MX8ULP_PAD_PTE9__SDHC2_D7 0x00A4 0x0AB4 0x8 0x1
#define MX8ULP_PAD_PTE9__FLEXSPI2_B_DATA1 0x00A4 0x0958 0x9 0x2
#define MX8ULP_PAD_PTE9__ENET0_1588_TMR3 0x00A4 0x0AE0 0xa 0x1
#define MX8ULP_PAD_PTE9__DBI0_D4 0x00A4 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE9__EPDC0_VCOM1 0x00A4 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE9__LP_HV_DBG_MUX_4 0x00A4 0x0000 0xe 0x0
#define MX8ULP_PAD_PTE9__DEBUG_MUX1_20 0x00A4 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE10__PTE10 0x00A8 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE10__FXIO1_D13 0x00A8 0x0850 0x2 0x1
#define MX8ULP_PAD_PTE10__LPSPI4_PCS3 0x00A8 0x0900 0x3 0x2
#define MX8ULP_PAD_PTE10__LPUART6_TX 0x00A8 0x09D4 0x4 0x1
#define MX8ULP_PAD_PTE10__I3C2_SCL 0x00A8 0x08BC 0x5 0x1
#define MX8ULP_PAD_PTE10__TPM4_CH2 0x00A8 0x080C 0x6 0x1
#define MX8ULP_PAD_PTE10__I2S6_TX_BCLK 0x00A8 0x0B4C 0x7 0x2
#define MX8ULP_PAD_PTE10__SDHC2_DQS 0x00A8 0x0AB8 0x8 0x1
#define MX8ULP_PAD_PTE10__FLEXSPI2_B_DATA0 0x00A8 0x0954 0x9 0x2
#define MX8ULP_PAD_PTE10__ENET0_1588_TMR2 0x00A8 0x0ADC 0xa 0x1
#define MX8ULP_PAD_PTE10__DBI0_D5 0x00A8 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE10__EPDC0_VCOM0 0x00A8 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE10__LP_HV_DBG_MUX_5 0x00A8 0x0000 0xe 0x0
#define MX8ULP_PAD_PTE10__DEBUG_MUX1_21 0x00A8 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE11__PTE11 0x00AC 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE11__FXIO1_D12 0x00AC 0x084C 0x2 0x1
#define MX8ULP_PAD_PTE11__SPDIF_OUT1 0x00AC 0x0000 0x3 0x0
#define MX8ULP_PAD_PTE11__LPUART6_RX 0x00AC 0x09D0 0x4 0x1
#define MX8ULP_PAD_PTE11__I3C2_SDA 0x00AC 0x08C0 0x5 0x1
#define MX8ULP_PAD_PTE11__TPM4_CH3 0x00AC 0x0810 0x6 0x1
#define MX8ULP_PAD_PTE11__I2S6_TX_FS 0x00AC 0x0B50 0x7 0x2
#define MX8ULP_PAD_PTE11__FLEXSPI2_B_SCLK_B 0x00AC 0x0000 0x8 0x0
#define MX8ULP_PAD_PTE11__FLEXSPI2_B_SS0_B 0x00AC 0x0000 0x9 0x0
#define MX8ULP_PAD_PTE11__ENET0_1588_TMR1 0x00AC 0x0AD8 0xa 0x1
#define MX8ULP_PAD_PTE11__DBI0_D6 0x00AC 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE11__EPDC0_PWRCTRL0 0x00AC 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE11__LP_HV_DBG_MUX_6 0x00AC 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE12__PTE12 0x00B0 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE12__FXIO1_D11 0x00B0 0x0848 0x2 0x1
#define MX8ULP_PAD_PTE12__LPSPI4_SIN 0x00B0 0x0908 0x3 0x2
#define MX8ULP_PAD_PTE12__LPUART7_CTS_B 0x00B0 0x09D8 0x4 0x1
#define MX8ULP_PAD_PTE12__LPI2C7_SCL 0x00B0 0x09C4 0x5 0x1
#define MX8ULP_PAD_PTE12__TPM4_CH4 0x00B0 0x0814 0x6 0x1
#define MX8ULP_PAD_PTE12__I2S6_TXD0 0x00B0 0x0000 0x7 0x0
#define MX8ULP_PAD_PTE12__SDHC2_RESET_B 0x00B0 0x0000 0x8 0x0
#define MX8ULP_PAD_PTE12__FLEXSPI2_B_SS1_B 0x00B0 0x0000 0x9 0x0
#define MX8ULP_PAD_PTE12__ENET0_1588_TMR0 0x00B0 0x0AD4 0xa 0x1
#define MX8ULP_PAD_PTE12__DBI0_D7 0x00B0 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE12__EPDC0_PWRCTRL1 0x00B0 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE12__WUU1_P5 0x00B0 0x0000 0xd 0x0
#define MX8ULP_PAD_PTE13__PTE13 0x00B4 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE13__FXIO1_D10 0x00B4 0x0844 0x2 0x1
#define MX8ULP_PAD_PTE13__LPSPI4_SOUT 0x00B4 0x090C 0x3 0x2
#define MX8ULP_PAD_PTE13__LPUART7_RTS_B 0x00B4 0x0000 0x4 0x0
#define MX8ULP_PAD_PTE13__LPI2C7_SDA 0x00B4 0x09C8 0x5 0x1
#define MX8ULP_PAD_PTE13__TPM4_CH5 0x00B4 0x0818 0x6 0x1
#define MX8ULP_PAD_PTE13__I2S6_TXD1 0x00B4 0x0000 0x7 0x0
#define MX8ULP_PAD_PTE13__SDHC1_WP 0x00B4 0x0A88 0x8 0x2
#define MX8ULP_PAD_PTE13__ENET0_1588_CLKIN 0x00B4 0x0AD0 0xa 0x1
#define MX8ULP_PAD_PTE13__DBI0_D8 0x00B4 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE13__EPDC0_PWRCTRL2 0x00B4 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE13__LP_HV_DBG_MUX_7 0x00B4 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE14__PTE14 0x00B8 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE14__FXIO1_D9 0x00B8 0x08B8 0x2 0x1
#define MX8ULP_PAD_PTE14__LPSPI4_SCK 0x00B8 0x0904 0x3 0x2
#define MX8ULP_PAD_PTE14__LPUART7_TX 0x00B8 0x09E0 0x4 0x1
#define MX8ULP_PAD_PTE14__LPI2C7_HREQ 0x00B8 0x09C0 0x5 0x1
#define MX8ULP_PAD_PTE14__TPM5_CLKIN 0x00B8 0x0838 0x6 0x1
#define MX8ULP_PAD_PTE14__I2S6_TXD2 0x00B8 0x0000 0x7 0x0
#define MX8ULP_PAD_PTE14__SDHC1_CD 0x00B8 0x0A58 0x8 0x2
#define MX8ULP_PAD_PTE14__ENET0_MDIO 0x00B8 0x0AF0 0xa 0x1
#define MX8ULP_PAD_PTE14__DBI0_D9 0x00B8 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE14__EPDC0_PWRCTRL3 0x00B8 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE14__LP_HV_DBG_MUX_8 0x00B8 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE15__PTE15 0x00BC 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE15__FXIO1_D8 0x00BC 0x08B4 0x2 0x1
#define MX8ULP_PAD_PTE15__LPSPI4_PCS0 0x00BC 0x08F4 0x3 0x2
#define MX8ULP_PAD_PTE15__LPUART7_RX 0x00BC 0x09DC 0x4 0x1
#define MX8ULP_PAD_PTE15__I3C2_PUR 0x00BC 0x0000 0x5 0x0
#define MX8ULP_PAD_PTE15__TPM5_CH0 0x00BC 0x0820 0x6 0x1
#define MX8ULP_PAD_PTE15__I2S6_TXD3 0x00BC 0x0000 0x7 0x0
#define MX8ULP_PAD_PTE15__MQS1_LEFT 0x00BC 0x0000 0x8 0x0
#define MX8ULP_PAD_PTE15__ENET0_MDC 0x00BC 0x0000 0xa 0x0
#define MX8ULP_PAD_PTE15__DBI0_D10 0x00BC 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE15__EPDC0_PWRCOM 0x00BC 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE15__WUU1_P6 0x00BC 0x0000 0xd 0x0
#define MX8ULP_PAD_PTE16__PTE16 0x00C0 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE16__FXIO1_D7 0x00C0 0x08B0 0x2 0x1
#define MX8ULP_PAD_PTE16__LPSPI5_PCS1 0x00C0 0x0914 0x3 0x1
#define MX8ULP_PAD_PTE16__LPUART4_CTS_B 0x00C0 0x08DC 0x4 0x2
#define MX8ULP_PAD_PTE16__LPI2C4_SCL 0x00C0 0x08C8 0x5 0x2
#define MX8ULP_PAD_PTE16__TPM5_CH1 0x00C0 0x0824 0x6 0x1
#define MX8ULP_PAD_PTE16__MQS1_LEFT 0x00C0 0x0000 0x7 0x0
#define MX8ULP_PAD_PTE16__MQS1_RIGHT 0x00C0 0x0000 0x8 0x0
#define MX8ULP_PAD_PTE16__USB0_ID 0x00C0 0x0AC8 0x9 0x2
#define MX8ULP_PAD_PTE16__ENET0_TXEN 0x00C0 0x0000 0xa 0x0
#define MX8ULP_PAD_PTE16__DBI0_D11 0x00C0 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE16__EPDC0_PWRIRQ 0x00C0 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE16__WDOG3_RST 0x00C0 0x0000 0xd 0x0
#define MX8ULP_PAD_PTE16__LP_HV_DBG_MUX_9 0x00C0 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE17__PTE17 0x00C4 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE17__FXIO1_D6 0x00C4 0x08AC 0x2 0x1
#define MX8ULP_PAD_PTE17__LPSPI5_PCS2 0x00C4 0x0918 0x3 0x1
#define MX8ULP_PAD_PTE17__LPUART4_RTS_B 0x00C4 0x0000 0x4 0x0
#define MX8ULP_PAD_PTE17__LPI2C4_SDA 0x00C4 0x08CC 0x5 0x2
#define MX8ULP_PAD_PTE17__MQS1_RIGHT 0x00C4 0x0000 0x7 0x0
#define MX8ULP_PAD_PTE17__SDHC1_VS 0x00C4 0x0000 0x8 0x0
#define MX8ULP_PAD_PTE17__USB0_PWR 0x00C4 0x0000 0x9 0x0
#define MX8ULP_PAD_PTE17__ENET0_RXER 0x00C4 0x0B08 0xa 0x1
#define MX8ULP_PAD_PTE17__DBI0_D12 0x00C4 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE17__EPDC0_PWRSTAT 0x00C4 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE17__LP_HV_DBG_MUX_10 0x00C4 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE18__PTE18 0x00C8 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE18__FXIO1_D5 0x00C8 0x08A8 0x2 0x1
#define MX8ULP_PAD_PTE18__LPSPI5_PCS3 0x00C8 0x091C 0x3 0x1
#define MX8ULP_PAD_PTE18__LPUART4_TX 0x00C8 0x08E4 0x4 0x2
#define MX8ULP_PAD_PTE18__LPI2C4_HREQ 0x00C8 0x08C4 0x5 0x2
#define MX8ULP_PAD_PTE18__I2S7_TX_BCLK 0x00C8 0x0B6C 0x7 0x2
#define MX8ULP_PAD_PTE18__USB0_OC 0x00C8 0x0AC0 0x9 0x2
#define MX8ULP_PAD_PTE18__ENET0_CRS_DV 0x00C8 0x0AEC 0xa 0x1
#define MX8ULP_PAD_PTE18__DBI0_D13 0x00C8 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE18__EPDC0_PWRWAKE 0x00C8 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE18__LP_HV_DBG_MUX_11 0x00C8 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE19__PTE19 0x00CC 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE19__FXIO1_D4 0x00CC 0x08A4 0x2 0x1
#define MX8ULP_PAD_PTE19__LPUART4_RX 0x00CC 0x08E0 0x4 0x2
#define MX8ULP_PAD_PTE19__LPI2C5_HREQ 0x00CC 0x08D0 0x5 0x2
#define MX8ULP_PAD_PTE19__I3C2_PUR 0x00CC 0x0000 0x6 0x0
#define MX8ULP_PAD_PTE19__I2S7_TX_FS 0x00CC 0x0B70 0x7 0x2
#define MX8ULP_PAD_PTE19__USB1_PWR 0x00CC 0x0000 0x9 0x0
#define MX8ULP_PAD_PTE19__ENET0_REFCLK 0x00CC 0x0AF4 0xa 0x1
#define MX8ULP_PAD_PTE19__DBI0_D14 0x00CC 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE19__EPDC0_GDCLK 0x00CC 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE19__WUU1_P7 0x00CC 0x0000 0xd 0x0
#define MX8ULP_PAD_PTE20__PTE20 0x00D0 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE20__FXIO1_D3 0x00D0 0x0898 0x2 0x1
#define MX8ULP_PAD_PTE20__LPSPI5_SIN 0x00D0 0x0924 0x3 0x1
#define MX8ULP_PAD_PTE20__LPUART5_CTS_B 0x00D0 0x08E8 0x4 0x2
#define MX8ULP_PAD_PTE20__LPI2C5_SCL 0x00D0 0x08D4 0x5 0x2
#define MX8ULP_PAD_PTE20__I2S7_TXD0 0x00D0 0x0000 0x7 0x0
#define MX8ULP_PAD_PTE20__USB1_OC 0x00D0 0x0AC4 0x9 0x2
#define MX8ULP_PAD_PTE20__ENET0_RXD1 0x00D0 0x0AFC 0xa 0x1
#define MX8ULP_PAD_PTE20__DBI0_D15 0x00D0 0x0000 0xb 0x0
#define MX8ULP_PAD_PTE20__EPDC0_GDOE 0x00D0 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE20__LP_HV_DBG_MUX_12 0x00D0 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE21__PTE21 0x00D4 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE21__FXIO1_D2 0x00D4 0x086C 0x2 0x1
#define MX8ULP_PAD_PTE21__LPSPI5_SOUT 0x00D4 0x0928 0x3 0x1
#define MX8ULP_PAD_PTE21__LPUART5_RTS_B 0x00D4 0x0000 0x4 0x0
#define MX8ULP_PAD_PTE21__LPI2C5_SDA 0x00D4 0x08D8 0x5 0x2
#define MX8ULP_PAD_PTE21__TPM6_CLKIN 0x00D4 0x0994 0x6 0x1
#define MX8ULP_PAD_PTE21__I2S7_TXD1 0x00D4 0x0000 0x7 0x0
#define MX8ULP_PAD_PTE21__USB1_ID 0x00D4 0x0ACC 0x9 0x2
#define MX8ULP_PAD_PTE21__ENET0_RXD0 0x00D4 0x0AF8 0xa 0x1
#define MX8ULP_PAD_PTE21__EPDC0_GDRL 0x00D4 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE21__WDOG4_RST 0x00D4 0x0000 0xd 0x0
#define MX8ULP_PAD_PTE21__LP_HV_DBG_MUX_13 0x00D4 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE22__PTE22 0x00D8 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE22__FXIO1_D1 0x00D8 0x0840 0x2 0x1
#define MX8ULP_PAD_PTE22__LPSPI5_SCK 0x00D8 0x0920 0x3 0x1
#define MX8ULP_PAD_PTE22__LPUART5_TX 0x00D8 0x08F0 0x4 0x2
#define MX8ULP_PAD_PTE22__I3C2_SCL 0x00D8 0x08BC 0x5 0x2
#define MX8ULP_PAD_PTE22__TPM6_CH0 0x00D8 0x097C 0x6 0x1
#define MX8ULP_PAD_PTE22__I2S7_TXD2 0x00D8 0x0000 0x7 0x0
#define MX8ULP_PAD_PTE22__EXT_AUD_MCLK3 0x00D8 0x0B14 0x9 0x5
#define MX8ULP_PAD_PTE22__ENET0_TXD1 0x00D8 0x0000 0xa 0x0
#define MX8ULP_PAD_PTE22__EPDC0_SDOED 0x00D8 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE22__CLKOUT2 0x00D8 0x0000 0xd 0x0
#define MX8ULP_PAD_PTE22__LP_HV_DBG_MUX_14 0x00D8 0x0000 0xf 0x0
#define MX8ULP_PAD_PTE23__PTE23 0x00DC 0x0000 0x1 0x0
#define MX8ULP_PAD_PTE23__FXIO1_D0 0x00DC 0x083C 0x2 0x1
#define MX8ULP_PAD_PTE23__LPSPI5_PCS0 0x00DC 0x0910 0x3 0x1
#define MX8ULP_PAD_PTE23__LPUART5_RX 0x00DC 0x08EC 0x4 0x2
#define MX8ULP_PAD_PTE23__I3C2_SDA 0x00DC 0x08C0 0x5 0x2
#define MX8ULP_PAD_PTE23__TPM6_CH1 0x00DC 0x0980 0x6 0x1
#define MX8ULP_PAD_PTE23__I2S7_TXD3 0x00DC 0x0000 0x7 0x0
#define MX8ULP_PAD_PTE23__EXT_AUD_MCLK2 0x00DC 0x0800 0x9 0x1
#define MX8ULP_PAD_PTE23__ENET0_TXD0 0x00DC 0x0000 0xa 0x0
#define MX8ULP_PAD_PTE23__EPDC0_SDOEZ 0x00DC 0x0000 0xc 0x0
#define MX8ULP_PAD_PTE23__CLKOUT1 0x00DC 0x0000 0xd 0x0
#define MX8ULP_PAD_PTE23__LP_HV_DBG_MUX_15 0x00DC 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF0__PTF0 0x0100 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF0__FXIO1_D0 0x0100 0x083C 0x2 0x2
#define MX8ULP_PAD_PTF0__LPUART6_CTS_B 0x0100 0x09CC 0x4 0x2
#define MX8ULP_PAD_PTF0__LPI2C6_SCL 0x0100 0x09B8 0x5 0x2
#define MX8ULP_PAD_PTF0__I2S7_RX_BCLK 0x0100 0x0B64 0x7 0x2
#define MX8ULP_PAD_PTF0__SDHC1_D1 0x0100 0x0A68 0x8 0x2
#define MX8ULP_PAD_PTF0__ENET0_RXD1 0x0100 0x0AFC 0x9 0x2
#define MX8ULP_PAD_PTF0__USB1_ID 0x0100 0x0ACC 0xa 0x3
#define MX8ULP_PAD_PTF0__EPDC0_SDOE 0x0100 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF0__DPI0_D23 0x0100 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF0__WUU1_P8 0x0100 0x0000 0xd 0x0
#define MX8ULP_PAD_PTF1__PTF1 0x0104 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF1__FXIO1_D1 0x0104 0x0840 0x2 0x2
#define MX8ULP_PAD_PTF1__LPUART6_RTS_B 0x0104 0x0000 0x4 0x0
#define MX8ULP_PAD_PTF1__LPI2C6_SDA 0x0104 0x09BC 0x5 0x2
#define MX8ULP_PAD_PTF1__I2S7_RX_FS 0x0104 0x0B68 0x7 0x2
#define MX8ULP_PAD_PTF1__SDHC1_D0 0x0104 0x0A64 0x8 0x2
#define MX8ULP_PAD_PTF1__ENET0_RXD0 0x0104 0x0AF8 0x9 0x2
#define MX8ULP_PAD_PTF1__LP_HV_DBG_MUX_16 0x0104 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF1__EPDC0_SDSHR 0x0104 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF1__DPI0_D22 0x0104 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF1__WDOG3_RST 0x0104 0x0000 0xd 0x0
#define MX8ULP_PAD_PTF1__DEBUG_MUX0_16 0x0104 0x0000 0xe 0x0
#define MX8ULP_PAD_PTF1__DEBUG_MUX1_22 0x0104 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF2__PTF2 0x0108 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF2__FXIO1_D2 0x0108 0x086C 0x2 0x2
#define MX8ULP_PAD_PTF2__LPUART6_TX 0x0108 0x09D4 0x4 0x2
#define MX8ULP_PAD_PTF2__LPI2C6_HREQ 0x0108 0x09B4 0x5 0x2
#define MX8ULP_PAD_PTF2__I2S7_RXD0 0x0108 0x0B54 0x7 0x2
#define MX8ULP_PAD_PTF2__SDHC1_CLK 0x0108 0x0A5C 0x8 0x2
#define MX8ULP_PAD_PTF2__ENET0_TXD1 0x0108 0x0000 0x9 0x0
#define MX8ULP_PAD_PTF2__USB0_ID 0x0108 0x0AC8 0xa 0x3
#define MX8ULP_PAD_PTF2__EPDC0_SDCE9 0x0108 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF2__DPI0_D21 0x0108 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF2__LP_HV_DBG_MUX_17 0x0108 0x0000 0xd 0x0
#define MX8ULP_PAD_PTF2__DEBUG_MUX0_17 0x0108 0x0000 0xe 0x0
#define MX8ULP_PAD_PTF2__DEBUG_MUX1_23 0x0108 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF3__PTF3 0x010C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF3__FXIO1_D3 0x010C 0x0898 0x2 0x2
#define MX8ULP_PAD_PTF3__LPUART6_RX 0x010C 0x09D0 0x4 0x2
#define MX8ULP_PAD_PTF3__LPI2C7_HREQ 0x010C 0x09C0 0x5 0x2
#define MX8ULP_PAD_PTF3__I2S7_RXD1 0x010C 0x0B58 0x7 0x2
#define MX8ULP_PAD_PTF3__SDHC1_CMD 0x010C 0x0A60 0x8 0x2
#define MX8ULP_PAD_PTF3__ENET0_TXD0 0x010C 0x0000 0x9 0x0
#define MX8ULP_PAD_PTF3__USB0_PWR 0x010C 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF3__EPDC0_SDCE8 0x010C 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF3__DPI0_D20 0x010C 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF3__WUU1_P9 0x010C 0x0000 0xd 0x0
#define MX8ULP_PAD_PTF3__DEBUG_MUX1_24 0x010C 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF4__PTF4 0x0110 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF4__FXIO1_D4 0x0110 0x08A4 0x2 0x2
#define MX8ULP_PAD_PTF4__LPSPI4_PCS1 0x0110 0x08F8 0x3 0x3
#define MX8ULP_PAD_PTF4__LPUART7_CTS_B 0x0110 0x09D8 0x4 0x2
#define MX8ULP_PAD_PTF4__LPI2C7_SCL 0x0110 0x09C4 0x5 0x2
#define MX8ULP_PAD_PTF4__TPM7_CLKIN 0x0110 0x09B0 0x6 0x1
#define MX8ULP_PAD_PTF4__I2S7_RXD2 0x0110 0x0B5C 0x7 0x2
#define MX8ULP_PAD_PTF4__SDHC1_D3 0x0110 0x0A70 0x8 0x2
#define MX8ULP_PAD_PTF4__ENET0_TXEN 0x0110 0x0000 0x9 0x0
#define MX8ULP_PAD_PTF4__USB0_OC 0x0110 0x0AC0 0xa 0x3
#define MX8ULP_PAD_PTF4__EPDC0_SDCE7 0x0110 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF4__DPI0_D19 0x0110 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF4__WUU1_P10 0x0110 0x0000 0xd 0x0
#define MX8ULP_PAD_PTF4__DEBUG_MUX1_25 0x0110 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF5__PTF5 0x0114 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF5__FXIO1_D5 0x0114 0x08A8 0x2 0x2
#define MX8ULP_PAD_PTF5__LPSPI4_PCS2 0x0114 0x08FC 0x3 0x3
#define MX8ULP_PAD_PTF5__LPUART7_RTS_B 0x0114 0x0000 0x4 0x0
#define MX8ULP_PAD_PTF5__LPI2C7_SDA 0x0114 0x09C8 0x5 0x2
#define MX8ULP_PAD_PTF5__TPM7_CH0 0x0114 0x0998 0x6 0x1
#define MX8ULP_PAD_PTF5__I2S7_RXD3 0x0114 0x0B60 0x7 0x2
#define MX8ULP_PAD_PTF5__SDHC1_D2 0x0114 0x0A6C 0x8 0x2
#define MX8ULP_PAD_PTF5__ENET0_RXER 0x0114 0x0B08 0x9 0x2
#define MX8ULP_PAD_PTF5__USB1_PWR 0x0114 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF5__EPDC0_SDCE6 0x0114 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF5__DPI0_D18 0x0114 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF5__LP_HV_DBG_MUX_18 0x0114 0x0000 0xd 0x0
#define MX8ULP_PAD_PTF5__DEBUG_MUX0_18 0x0114 0x0000 0xe 0x0
#define MX8ULP_PAD_PTF5__DEBUG_MUX1_26 0x0114 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF6__LP_HV_DBG_MUX_19 0x0118 0x0000 0x0 0x0
#define MX8ULP_PAD_PTF6__PTF6 0x0118 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF6__FXIO1_D6 0x0118 0x08AC 0x2 0x2
#define MX8ULP_PAD_PTF6__LPSPI4_PCS3 0x0118 0x0900 0x3 0x3
#define MX8ULP_PAD_PTF6__LPUART7_TX 0x0118 0x09E0 0x4 0x2
#define MX8ULP_PAD_PTF6__I3C2_SCL 0x0118 0x08BC 0x5 0x3
#define MX8ULP_PAD_PTF6__TPM7_CH1 0x0118 0x099C 0x6 0x1
#define MX8ULP_PAD_PTF6__I2S7_MCLK 0x0118 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF6__SDHC1_D4 0x0118 0x0A74 0x8 0x2
#define MX8ULP_PAD_PTF6__ENET0_CRS_DV 0x0118 0x0AEC 0x9 0x2
#define MX8ULP_PAD_PTF6__USB1_OC 0x0118 0x0AC4 0xa 0x3
#define MX8ULP_PAD_PTF6__EPDC0_SDCE5 0x0118 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF6__DPI0_D17 0x0118 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF6__WDOG4_RST 0x0118 0x0000 0xd 0x0
#define MX8ULP_PAD_PTF6__DEBUG_MUX0_19 0x0118 0x0000 0xe 0x0
#define MX8ULP_PAD_PTF6__DEBUG_MUX1_27 0x0118 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF7__PTF7 0x011C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF7__FXIO1_D7 0x011C 0x08B0 0x2 0x2
#define MX8ULP_PAD_PTF7__LPUART7_RX 0x011C 0x09DC 0x4 0x2
#define MX8ULP_PAD_PTF7__I3C2_SDA 0x011C 0x08C0 0x5 0x3
#define MX8ULP_PAD_PTF7__TPM7_CH2 0x011C 0x09A0 0x6 0x1
#define MX8ULP_PAD_PTF7__MQS1_LEFT 0x011C 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF7__SDHC1_D5 0x011C 0x0A78 0x8 0x2
#define MX8ULP_PAD_PTF7__ENET0_REFCLK 0x011C 0x0AF4 0x9 0x2
#define MX8ULP_PAD_PTF7__TRACE0_D15 0x011C 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF7__EPDC0_SDCE4 0x011C 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF7__DPI0_D16 0x011C 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF7__WUU1_P11 0x011C 0x0000 0xd 0x0
#define MX8ULP_PAD_PTF7__DEBUG_MUX1_28 0x011C 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF8__PTF8 0x0120 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF8__FXIO1_D8 0x0120 0x08B4 0x2 0x2
#define MX8ULP_PAD_PTF8__LPSPI4_SIN 0x0120 0x0908 0x3 0x3
#define MX8ULP_PAD_PTF8__LPUART4_CTS_B 0x0120 0x08DC 0x4 0x3
#define MX8ULP_PAD_PTF8__LPI2C4_SCL 0x0120 0x08C8 0x5 0x3
#define MX8ULP_PAD_PTF8__TPM7_CH3 0x0120 0x09A4 0x6 0x1
#define MX8ULP_PAD_PTF8__MQS1_RIGHT 0x0120 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF8__SDHC1_D6 0x0120 0x0A7C 0x8 0x2
#define MX8ULP_PAD_PTF8__ENET0_MDIO 0x0120 0x0AF0 0x9 0x2
#define MX8ULP_PAD_PTF8__TRACE0_D14 0x0120 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF8__EPDC0_D15 0x0120 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF8__DPI0_D15 0x0120 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF8__LP_HV_DBG_MUX_24 0x0120 0x0000 0xe 0x0
#define MX8ULP_PAD_PTF8__DEBUG_MUX1_29 0x0120 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF9__PTF9 0x0124 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF9__FXIO1_D9 0x0124 0x08B8 0x2 0x2
#define MX8ULP_PAD_PTF9__LPSPI4_SOUT 0x0124 0x090C 0x3 0x3
#define MX8ULP_PAD_PTF9__LPUART4_RTS_B 0x0124 0x0000 0x4 0x0
#define MX8ULP_PAD_PTF9__LPI2C4_SDA 0x0124 0x08CC 0x5 0x3
#define MX8ULP_PAD_PTF9__TPM7_CH4 0x0124 0x09A8 0x6 0x1
#define MX8ULP_PAD_PTF9__EXT_AUD_MCLK2 0x0124 0x0800 0x7 0x2
#define MX8ULP_PAD_PTF9__SDHC1_D7 0x0124 0x0A80 0x8 0x2
#define MX8ULP_PAD_PTF9__ENET0_MDC 0x0124 0x0000 0x9 0x0
#define MX8ULP_PAD_PTF9__TRACE0_D13 0x0124 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF9__EPDC0_D14 0x0124 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF9__DPI0_D14 0x0124 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF9__LP_HV_DBG_MUX_25 0x0124 0x0000 0xe 0x0
#define MX8ULP_PAD_PTF9__DEBUG_MUX1_30 0x0124 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF10__LP_HV_DBG_MUX_26 0x0128 0x0000 0x0 0x0
#define MX8ULP_PAD_PTF10__PTF10 0x0128 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF10__FXIO1_D10 0x0128 0x0844 0x2 0x2
#define MX8ULP_PAD_PTF10__LPSPI4_SCK 0x0128 0x0904 0x3 0x3
#define MX8ULP_PAD_PTF10__LPUART4_TX 0x0128 0x08E4 0x4 0x3
#define MX8ULP_PAD_PTF10__LPI2C4_HREQ 0x0128 0x08C4 0x5 0x3
#define MX8ULP_PAD_PTF10__TPM7_CH5 0x0128 0x09AC 0x6 0x1
#define MX8ULP_PAD_PTF10__I2S4_RX_BCLK 0x0128 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF10__SDHC1_DQS 0x0128 0x0A84 0x8 0x2
#define MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x0128 0x0AD0 0x9 0x2
#define MX8ULP_PAD_PTF10__TRACE0_D12 0x0128 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF10__EPDC0_D13 0x0128 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF10__DPI0_D13 0x0128 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF10__DEBUG_MUX0_20 0x0128 0x0000 0xe 0x0
#define MX8ULP_PAD_PTF10__DEBUG_MUX1_31 0x0128 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF11__PTF11 0x012C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF11__FXIO1_D11 0x012C 0x0848 0x2 0x2
#define MX8ULP_PAD_PTF11__LPSPI4_PCS0 0x012C 0x08F4 0x3 0x3
#define MX8ULP_PAD_PTF11__LPUART4_RX 0x012C 0x08E0 0x4 0x3
#define MX8ULP_PAD_PTF11__TPM4_CLKIN 0x012C 0x081C 0x6 0x2
#define MX8ULP_PAD_PTF11__I2S4_RX_FS 0x012C 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF11__SDHC1_RESET_B 0x012C 0x0000 0x8 0x0
#define MX8ULP_PAD_PTF11__ENET0_1588_TMR0 0x012C 0x0AD4 0x9 0x2
#define MX8ULP_PAD_PTF11__TRACE0_D11 0x012C 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF11__EPDC0_D12 0x012C 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF11__DPI0_D12 0x012C 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF11__LP_HV_DBG_MUX_27 0x012C 0x0000 0xe 0x0
#define MX8ULP_PAD_PTF11__DEBUG_MUX1_32 0x012C 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF12__PTF12 0x0130 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF12__FXIO1_D12 0x0130 0x084C 0x2 0x2
#define MX8ULP_PAD_PTF12__LPSPI5_PCS1 0x0130 0x0914 0x3 0x2
#define MX8ULP_PAD_PTF12__LPUART5_CTS_B 0x0130 0x08E8 0x4 0x3
#define MX8ULP_PAD_PTF12__LPI2C5_SCL 0x0130 0x08D4 0x5 0x3
#define MX8ULP_PAD_PTF12__TPM4_CH0 0x0130 0x0804 0x6 0x2
#define MX8ULP_PAD_PTF12__I2S4_RXD0 0x0130 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF12__SDHC2_WP 0x0130 0x0ABC 0x8 0x1
#define MX8ULP_PAD_PTF12__ENET0_1588_TMR1 0x0130 0x0AD8 0x9 0x2
#define MX8ULP_PAD_PTF12__TRACE0_D10 0x0130 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF12__EPDC0_D11 0x0130 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF12__DPI0_D11 0x0130 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF12__LP_HV_DBG_MUX_28 0x0130 0x0000 0xe 0x0
#define MX8ULP_PAD_PTF12__DEBUG_MUX1_33 0x0130 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF13__PTF13 0x0134 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF13__FXIO1_D13 0x0134 0x0850 0x2 0x2
#define MX8ULP_PAD_PTF13__LPSPI5_PCS2 0x0134 0x0918 0x3 0x2
#define MX8ULP_PAD_PTF13__LPUART5_RTS_B 0x0134 0x0000 0x4 0x0
#define MX8ULP_PAD_PTF13__LPI2C5_SDA 0x0134 0x08D8 0x5 0x3
#define MX8ULP_PAD_PTF13__TPM4_CH1 0x0134 0x0808 0x6 0x2
#define MX8ULP_PAD_PTF13__I2S4_RXD1 0x0134 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF13__SDHC2_CD 0x0134 0x0A8C 0x8 0x1
#define MX8ULP_PAD_PTF13__ENET0_1588_TMR2 0x0134 0x0ADC 0x9 0x2
#define MX8ULP_PAD_PTF13__TRACE0_D9 0x0134 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF13__EPDC0_D10 0x0134 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF13__DPI0_D10 0x0134 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF13__DEBUG_MUX0_21 0x0134 0x0000 0xe 0x0
#define MX8ULP_PAD_PTF13__LP_HV_DBG_MUX_29 0x0134 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF14__PTF14 0x0138 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF14__FXIO1_D14 0x0138 0x0854 0x2 0x2
#define MX8ULP_PAD_PTF14__LPSPI5_PCS3 0x0138 0x091C 0x3 0x2
#define MX8ULP_PAD_PTF14__LPUART5_TX 0x0138 0x08F0 0x4 0x3
#define MX8ULP_PAD_PTF14__LPI2C5_HREQ 0x0138 0x08D0 0x5 0x3
#define MX8ULP_PAD_PTF14__TPM4_CH2 0x0138 0x080C 0x6 0x2
#define MX8ULP_PAD_PTF14__I2S4_MCLK 0x0138 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF14__SDHC2_VS 0x0138 0x0000 0x8 0x0
#define MX8ULP_PAD_PTF14__ENET0_1588_TMR3 0x0138 0x0AE0 0x9 0x2
#define MX8ULP_PAD_PTF14__TRACE0_D8 0x0138 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF14__EPDC0_D9 0x0138 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF14__DPI0_D9 0x0138 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF14__DEBUG_MUX0_22 0x0138 0x0000 0xe 0x0
#define MX8ULP_PAD_PTF14__LP_HV_DBG_MUX_30 0x0138 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF15__PTF15 0x013C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF15__FXIO1_D15 0x013C 0x0858 0x2 0x2
#define MX8ULP_PAD_PTF15__LPUART5_RX 0x013C 0x08EC 0x4 0x3
#define MX8ULP_PAD_PTF15__TPM4_CH3 0x013C 0x0810 0x6 0x2
#define MX8ULP_PAD_PTF15__I2S4_TX_BCLK 0x013C 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF15__SDHC2_D1 0x013C 0x0A9C 0x8 0x3
#define MX8ULP_PAD_PTF15__ENET0_RXD2 0x013C 0x0B00 0x9 0x2
#define MX8ULP_PAD_PTF15__TRACE0_D7 0x013C 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF15__EPDC0_D8 0x013C 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF15__DPI0_D8 0x013C 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF15__LP_HV_DBG_MUX_31 0x013C 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF16__PTF16 0x0140 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF16__FXIO1_D16 0x0140 0x085C 0x2 0x2
#define MX8ULP_PAD_PTF16__LPSPI5_SIN 0x0140 0x0924 0x3 0x2
#define MX8ULP_PAD_PTF16__LPUART6_CTS_B 0x0140 0x09CC 0x4 0x3
#define MX8ULP_PAD_PTF16__LPI2C6_SCL 0x0140 0x09B8 0x5 0x3
#define MX8ULP_PAD_PTF16__TPM4_CH4 0x0140 0x0814 0x6 0x2
#define MX8ULP_PAD_PTF16__I2S4_TX_FS 0x0140 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF16__SDHC2_D0 0x0140 0x0A98 0x8 0x3
#define MX8ULP_PAD_PTF16__ENET0_RXD3 0x0140 0x0B04 0x9 0x2
#define MX8ULP_PAD_PTF16__TRACE0_D6 0x0140 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF16__EPDC0_D7 0x0140 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF16__DPI0_D7 0x0140 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF16__LP_HV_DBG_MUX_32 0x0140 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF17__PTF17 0x0144 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF17__FXIO1_D17 0x0144 0x0860 0x2 0x2
#define MX8ULP_PAD_PTF17__LPSPI5_SOUT 0x0144 0x0928 0x3 0x2
#define MX8ULP_PAD_PTF17__LPUART6_RTS_B 0x0144 0x0000 0x4 0x0
#define MX8ULP_PAD_PTF17__LPI2C6_SDA 0x0144 0x09BC 0x5 0x3
#define MX8ULP_PAD_PTF17__TPM4_CH5 0x0144 0x0818 0x6 0x2
#define MX8ULP_PAD_PTF17__I2S4_TXD0 0x0144 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF17__SDHC2_CLK 0x0144 0x0A90 0x8 0x3
#define MX8ULP_PAD_PTF17__ENET0_RXCLK 0x0144 0x0B0C 0x9 0x2
#define MX8ULP_PAD_PTF17__TRACE0_D5 0x0144 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF17__EPDC0_D6 0x0144 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF17__DPI0_D6 0x0144 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF17__DEBUG_MUX0_23 0x0144 0x0000 0xe 0x0
#define MX8ULP_PAD_PTF17__LP_HV_DBG_MUX_33 0x0144 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF18__PTF18 0x0148 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF18__FXIO1_D18 0x0148 0x0864 0x2 0x2
#define MX8ULP_PAD_PTF18__LPSPI5_SCK 0x0148 0x0920 0x3 0x2
#define MX8ULP_PAD_PTF18__LPUART6_TX 0x0148 0x09D4 0x4 0x3
#define MX8ULP_PAD_PTF18__LPI2C6_HREQ 0x0148 0x09B4 0x5 0x3
#define MX8ULP_PAD_PTF18__TPM5_CLKIN 0x0148 0x0838 0x6 0x2
#define MX8ULP_PAD_PTF18__I2S4_TXD1 0x0148 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF18__SDHC2_CMD 0x0148 0x0A94 0x8 0x3
#define MX8ULP_PAD_PTF18__ENET0_TXD2 0x0148 0x0000 0x9 0x0
#define MX8ULP_PAD_PTF18__TRACE0_D4 0x0148 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF18__EPDC0_D5 0x0148 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF18__DPI0_D5 0x0148 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF19__PTF19 0x014C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF19__FXIO1_D19 0x014C 0x0868 0x2 0x2
#define MX8ULP_PAD_PTF19__LPSPI5_PCS0 0x014C 0x0910 0x3 0x2
#define MX8ULP_PAD_PTF19__LPUART6_RX 0x014C 0x09D0 0x4 0x3
#define MX8ULP_PAD_PTF19__TPM5_CH0 0x014C 0x0820 0x6 0x2
#define MX8ULP_PAD_PTF19__I2S5_RX_BCLK 0x014C 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF19__SDHC2_D3 0x014C 0x0AA4 0x8 0x3
#define MX8ULP_PAD_PTF19__ENET0_TXD3 0x014C 0x0000 0x9 0x0
#define MX8ULP_PAD_PTF19__TRACE0_D3 0x014C 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF19__EPDC0_D4 0x014C 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF19__DPI0_D4 0x014C 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF20__PTF20 0x0150 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF20__FXIO1_D20 0x0150 0x0870 0x2 0x2
#define MX8ULP_PAD_PTF20__LPUART7_CTS_B 0x0150 0x09D8 0x4 0x3
#define MX8ULP_PAD_PTF20__LPI2C7_SCL 0x0150 0x09C4 0x5 0x3
#define MX8ULP_PAD_PTF20__TPM5_CH1 0x0150 0x0824 0x6 0x2
#define MX8ULP_PAD_PTF20__I2S5_RX_FS 0x0150 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF20__SDHC2_D2 0x0150 0x0AA0 0x8 0x3
#define MX8ULP_PAD_PTF20__ENET0_TXCLK 0x0150 0x0B10 0x9 0x2
#define MX8ULP_PAD_PTF20__TRACE0_D2 0x0150 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF20__EPDC0_D3 0x0150 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF20__DPI0_D3 0x0150 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF21__PTF21 0x0154 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF21__FXIO1_D21 0x0154 0x0874 0x2 0x2
#define MX8ULP_PAD_PTF21__SPDIF_CLK 0x0154 0x0000 0x3 0x0
#define MX8ULP_PAD_PTF21__LPUART7_RTS_B 0x0154 0x0000 0x4 0x0
#define MX8ULP_PAD_PTF21__LPI2C7_SDA 0x0154 0x09C8 0x5 0x3
#define MX8ULP_PAD_PTF21__TPM6_CLKIN 0x0154 0x0994 0x6 0x2
#define MX8ULP_PAD_PTF21__I2S5_RXD0 0x0154 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF21__SDHC2_D4 0x0154 0x0AA8 0x8 0x2
#define MX8ULP_PAD_PTF21__ENET0_CRS 0x0154 0x0AE8 0x9 0x2
#define MX8ULP_PAD_PTF21__TRACE0_D1 0x0154 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF21__EPDC0_D2 0x0154 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF21__DPI0_D2 0x0154 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF22__PTF22 0x0158 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF22__FXIO1_D22 0x0158 0x0878 0x2 0x2
#define MX8ULP_PAD_PTF22__SPDIF_IN0 0x0158 0x0B74 0x3 0x3
#define MX8ULP_PAD_PTF22__LPUART7_TX 0x0158 0x09E0 0x4 0x3
#define MX8ULP_PAD_PTF22__LPI2C7_HREQ 0x0158 0x09C0 0x5 0x3
#define MX8ULP_PAD_PTF22__TPM6_CH0 0x0158 0x097C 0x6 0x2
#define MX8ULP_PAD_PTF22__I2S5_RXD1 0x0158 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF22__SDHC2_D5 0x0158 0x0AAC 0x8 0x2
#define MX8ULP_PAD_PTF22__ENET0_COL 0x0158 0x0AE4 0x9 0x2
#define MX8ULP_PAD_PTF22__TRACE0_D0 0x0158 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF22__EPDC0_D1 0x0158 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF22__DPI0_D1 0x0158 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF23__PTF23 0x015C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF23__FXIO1_D23 0x015C 0x087C 0x2 0x2
#define MX8ULP_PAD_PTF23__SPDIF_OUT0 0x015C 0x0000 0x3 0x0
#define MX8ULP_PAD_PTF23__LPUART7_RX 0x015C 0x09DC 0x4 0x3
#define MX8ULP_PAD_PTF23__I3C2_PUR 0x015C 0x0000 0x5 0x0
#define MX8ULP_PAD_PTF23__TPM6_CH1 0x015C 0x0980 0x6 0x2
#define MX8ULP_PAD_PTF23__I2S5_RXD2 0x015C 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF23__SDHC2_D6 0x015C 0x0AB0 0x8 0x2
#define MX8ULP_PAD_PTF23__ENET0_TXER 0x015C 0x0000 0x9 0x0
#define MX8ULP_PAD_PTF23__TRACE0_CLKOUT 0x015C 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF23__EPDC0_D0 0x015C 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF23__DPI0_D0 0x015C 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF24__PTF24 0x0160 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF24__FXIO1_D24 0x0160 0x0880 0x2 0x2
#define MX8ULP_PAD_PTF24__SPDIF_IN1 0x0160 0x0B78 0x3 0x3
#define MX8ULP_PAD_PTF24__I3C2_SCL 0x0160 0x08BC 0x5 0x4
#define MX8ULP_PAD_PTF24__I2S5_RXD3 0x0160 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF24__SDHC2_D7 0x0160 0x0AB4 0x8 0x2
#define MX8ULP_PAD_PTF24__DBI0_WRX 0x0160 0x0000 0xa 0x0
#define MX8ULP_PAD_PTF24__EPDC0_SDCLK 0x0160 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF24__DPI0_PCLK 0x0160 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF24__WUU1_P12 0x0160 0x0000 0xd 0x0
#define MX8ULP_PAD_PTF25__PTF25 0x0164 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF25__FXIO1_D25 0x0164 0x0884 0x2 0x2
#define MX8ULP_PAD_PTF25__SPDIF_OUT1 0x0164 0x0000 0x3 0x0
#define MX8ULP_PAD_PTF25__I3C2_SDA 0x0164 0x08C0 0x5 0x4
#define MX8ULP_PAD_PTF25__TPM7_CH5 0x0164 0x09AC 0x6 0x2
#define MX8ULP_PAD_PTF25__I2S5_MCLK 0x0164 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF25__SDHC2_DQS 0x0164 0x0AB8 0x8 0x2
#define MX8ULP_PAD_PTF25__EXT_AUD_MCLK2 0x0164 0x0800 0x9 0x3
#define MX8ULP_PAD_PTF25__EPDC0_GDSP 0x0164 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF25__DPI0_VSYNC 0x0164 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF25__WUU1_P13 0x0164 0x0000 0xd 0x0
#define MX8ULP_PAD_PTF26__PTF26 0x0168 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF26__FXIO1_D26 0x0168 0x0888 0x2 0x2
#define MX8ULP_PAD_PTF26__SPDIF_IN2 0x0168 0x0B7C 0x3 0x3
#define MX8ULP_PAD_PTF26__TPM7_CLKIN 0x0168 0x09B0 0x6 0x2
#define MX8ULP_PAD_PTF26__I2S5_TX_BCLK 0x0168 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF26__SDHC2_RESET_B 0x0168 0x0000 0x8 0x0
#define MX8ULP_PAD_PTF26__EPDC0_SDLE 0x0168 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF26__DPI0_HSYNC 0x0168 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF26__WUU1_P14 0x0168 0x0000 0xd 0x0
#define MX8ULP_PAD_PTF27__PTF27 0x016C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF27__FXIO1_D27 0x016C 0x088C 0x2 0x2
#define MX8ULP_PAD_PTF27__SPDIF_OUT2 0x016C 0x0000 0x3 0x0
#define MX8ULP_PAD_PTF27__TPM7_CH0 0x016C 0x0998 0x6 0x2
#define MX8ULP_PAD_PTF27__I2S5_TX_FS 0x016C 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF27__SDHC2_WP 0x016C 0x0ABC 0x8 0x2
#define MX8ULP_PAD_PTF27__EPDC0_SDCE0 0x016C 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF27__DPI0_DE 0x016C 0x0000 0xc 0x0
#define MX8ULP_PAD_PTF27__WUU1_P15 0x016C 0x0000 0xd 0x0
#define MX8ULP_PAD_PTF28__PTF28 0x0170 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF28__FXIO1_D28 0x0170 0x0890 0x2 0x2
#define MX8ULP_PAD_PTF28__SPDIF_IN3 0x0170 0x0B80 0x3 0x3
#define MX8ULP_PAD_PTF28__TPM7_CH1 0x0170 0x099C 0x6 0x2
#define MX8ULP_PAD_PTF28__I2S5_TXD0 0x0170 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF28__SDHC2_CD 0x0170 0x0A8C 0x8 0x2
#define MX8ULP_PAD_PTF28__EPDC0_SDCLK_B 0x0170 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF28__LP_HV_DBG_MUX_20 0x0170 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF29__PTF29 0x0174 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF29__FXIO1_D29 0x0174 0x0894 0x2 0x2
#define MX8ULP_PAD_PTF29__SPDIF_OUT3 0x0174 0x0000 0x3 0x0
#define MX8ULP_PAD_PTF29__TPM7_CH2 0x0174 0x09A0 0x6 0x2
#define MX8ULP_PAD_PTF29__I2S5_TXD1 0x0174 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF29__SDHC2_VS 0x0174 0x0000 0x8 0x0
#define MX8ULP_PAD_PTF29__EPDC0_SDCE1 0x0174 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF29__WDOG3_RST 0x0174 0x0000 0xd 0x0
#define MX8ULP_PAD_PTF29__LP_HV_DBG_MUX_21 0x0174 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF30__PTF30 0x0178 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF30__FXIO1_D30 0x0178 0x089C 0x2 0x2
#define MX8ULP_PAD_PTF30__TPM7_CH3 0x0178 0x09A4 0x6 0x2
#define MX8ULP_PAD_PTF30__I2S5_TXD2 0x0178 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF30__MQS1_LEFT 0x0178 0x0000 0x8 0x0
#define MX8ULP_PAD_PTF30__EPDC0_SDCE2 0x0178 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF30__WDOG4_RST 0x0178 0x0000 0xd 0x0
#define MX8ULP_PAD_PTF30__LP_HV_DBG_MUX_22 0x0178 0x0000 0xf 0x0
#define MX8ULP_PAD_PTF31__PTF31 0x017C 0x0000 0x1 0x0
#define MX8ULP_PAD_PTF31__FXIO1_D31 0x017C 0x08A0 0x2 0x2
#define MX8ULP_PAD_PTF31__TPM7_CH4 0x017C 0x09A8 0x6 0x2
#define MX8ULP_PAD_PTF31__I2S5_TXD3 0x017C 0x0000 0x7 0x0
#define MX8ULP_PAD_PTF31__MQS1_RIGHT 0x017C 0x0000 0x8 0x0
#define MX8ULP_PAD_PTF31__EPDC0_SDCE3 0x017C 0x0000 0xb 0x0
#define MX8ULP_PAD_PTF31__WDOG5_RST 0x017C 0x0000 0xd 0x0
#define MX8ULP_PAD_PTF31__LP_HV_DBG_MUX_23 0x017C 0x0000 0xf 0x0
#define MX8ULP_PAD_BOOT_MODE0__BOOT_MODE0 0x0400 0x0000 0x0 0x0
#define MX8ULP_PAD_BOOT_MODE1__BOOT_MODE1 0x0404 0x0000 0x0 0x0
#endif /* __DTS_IMX8ULP_PINFUNC_H */

434
arch/arm64/boot/dts/freescale/imx8ulp.dtsi Normal file
Просмотреть файл

@ -0,0 +1,434 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2021 NXP
*/
#include <dt-bindings/clock/imx8ulp-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/imx8ulp-power.h>
#include "imx8ulp-pinfunc.h"
/ {
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
gpio0 = &gpiod;
gpio1 = &gpioe;
gpio2 = &gpiof;
mmc0 = &usdhc0;
mmc1 = &usdhc1;
mmc2 = &usdhc2;
serial0 = &lpuart4;
serial1 = &lpuart5;
serial2 = &lpuart6;
serial3 = &lpuart7;
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
A35_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a35";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
};
A35_1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a35";
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
};
A35_L2: l2-cache0 {
compatible = "cache";
};
};
gic: interrupt-controller@2d400000 {
compatible = "arm,gic-v3";
reg = <0x0 0x2d400000 0 0x10000>, /* GIC Dist */
<0x0 0x2d440000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
};
frosc: clock-frosc {
compatible = "fixed-clock";
clock-frequency = <192000000>;
clock-output-names = "frosc";
#clock-cells = <0>;
};
lposc: clock-lposc {
compatible = "fixed-clock";
clock-frequency = <1000000>;
clock-output-names = "lposc";
#clock-cells = <0>;
};
rosc: clock-rosc {
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "rosc";
#clock-cells = <0>;
};
sosc: clock-sosc {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "sosc";
#clock-cells = <0>;
};
sram@2201f000 {
compatible = "mmio-sram";
reg = <0x0 0x2201f000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0x2201f000 0x1000>;
scmi_buf: scmi-buf@0 {
compatible = "arm,scmi-shmem";
reg = <0x0 0x400>;
};
};
firmware {
scmi {
compatible = "arm,scmi-smc";
arm,smc-id = <0xc20000fe>;
#address-cells = <1>;
#size-cells = <0>;
shmem = <&scmi_buf>;
scmi_devpd: protocol@11 {
reg = <0x11>;
#power-domain-cells = <1>;
};
scmi_sensor: protocol@15 {
reg = <0x15>;
#thermal-sensor-cells = <0>;
};
};
};
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x40000000>;
per_bridge3: bus@29000000 {
compatible = "simple-bus";
reg = <0x29000000 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
wdog3: watchdog@292a0000 {
compatible = "fsl,imx8ulp-wdt", "fsl,imx7ulp-wdt";
reg = <0x292a0000 0x10000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
assigned-clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SOSC_DIV2>;
timeout-sec = <40>;
};
cgc1: clock-controller@292c0000 {
compatible = "fsl,imx8ulp-cgc1";
reg = <0x292c0000 0x10000>;
clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>;
clock-names = "rosc", "sosc", "frosc", "lposc";
#clock-cells = <1>;
};
pcc3: clock-controller@292d0000 {
compatible = "fsl,imx8ulp-pcc3";
reg = <0x292d0000 0x10000>;
#clock-cells = <1>;
};
tpm5: tpm@29340000 {
compatible = "fsl,imx8ulp-tpm", "fsl,imx7ulp-tpm";
reg = <0x29340000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX8ULP_CLK_TPM5>,
<&pcc3 IMX8ULP_CLK_TPM5>;
clock-names = "ipg", "per";
status = "disabled";
};
lpi2c4: i2c@29370000 {
compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x29370000 0x10000>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>,
<&pcc3 IMX8ULP_CLK_LPI2C4>;
clock-names = "per", "ipg";
assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>;
assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
assigned-clock-rates = <48000000>;
status = "disabled";
};
lpi2c5: i2c@29380000 {
compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x29380000 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>,
<&pcc3 IMX8ULP_CLK_LPI2C5>;
clock-names = "per", "ipg";
assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>;
assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
assigned-clock-rates = <48000000>;
status = "disabled";
};
lpuart4: serial@29390000 {
compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x29390000 0x1000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX8ULP_CLK_LPUART4>;
clock-names = "ipg";
status = "disabled";
};
lpuart5: serial@293a0000 {
compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x293a0000 0x1000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX8ULP_CLK_LPUART5>;
clock-names = "ipg";
status = "disabled";
};
lpspi4: spi@293b0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
reg = <0x293b0000 0x10000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>,
<&pcc3 IMX8ULP_CLK_LPSPI4>;
clock-names = "per", "ipg";
assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>;
assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
assigned-clock-rates = <16000000>;
status = "disabled";
};
lpspi5: spi@293c0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
reg = <0x293c0000 0x10000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>,
<&pcc3 IMX8ULP_CLK_LPSPI5>;
clock-names = "per", "ipg";
assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>;
assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
assigned-clock-rates = <16000000>;
status = "disabled";
};
};
per_bridge4: bus@29800000 {
compatible = "simple-bus";
reg = <0x29800000 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
pcc4: clock-controller@29800000 {
compatible = "fsl,imx8ulp-pcc4";
reg = <0x29800000 0x10000>;
#clock-cells = <1>;
};
lpi2c6: i2c@29840000 {
compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x29840000 0x10000>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>,
<&pcc4 IMX8ULP_CLK_LPI2C6>;
clock-names = "per", "ipg";
assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>;
assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
assigned-clock-rates = <48000000>;
status = "disabled";
};
lpi2c7: i2c@29850000 {
compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x29850000 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>,
<&pcc4 IMX8ULP_CLK_LPI2C7>;
clock-names = "per", "ipg";
assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>;
assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
assigned-clock-rates = <48000000>;
status = "disabled";
};
lpuart6: serial@29860000 {
compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x29860000 0x1000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc4 IMX8ULP_CLK_LPUART6>;
clock-names = "ipg";
status = "disabled";
};
lpuart7: serial@29870000 {
compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x29870000 0x1000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc4 IMX8ULP_CLK_LPUART7>;
clock-names = "ipg";
status = "disabled";
};
iomuxc1: pinctrl@298c0000 {
compatible = "fsl,imx8ulp-iomuxc1";
reg = <0x298c0000 0x10000>;
};
usdhc0: mmc@298d0000 {
compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
reg = <0x298d0000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
<&cgc1 IMX8ULP_CLK_XBAR_AD_DIVPLAT>,
<&pcc4 IMX8ULP_CLK_USDHC0>;
clock-names = "ipg", "ahb", "per";
power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step= <2>;
bus-width = <4>;
status = "disabled";
};
usdhc1: mmc@298e0000 {
compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
reg = <0x298e0000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
<&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
<&pcc4 IMX8ULP_CLK_USDHC1>;
clock-names = "ipg", "ahb", "per";
power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step= <2>;
bus-width = <4>;
status = "disabled";
};
usdhc2: mmc@298f0000 {
compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
reg = <0x298f0000 0x10000>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
<&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
<&pcc4 IMX8ULP_CLK_USDHC2>;
clock-names = "ipg", "ahb", "per";
power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step= <2>;
bus-width = <4>;
status = "disabled";
};
};
gpioe: gpio@2d000000 {
compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
reg = <0x2d000080 0x1000>, <0x2d000040 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>,
<&pcc4 IMX8ULP_CLK_PCTLE>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 32 24>;
};
gpiof: gpio@2d010000 {
compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
reg = <0x2d010080 0x1000>, <0x2d010040 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>,
<&pcc4 IMX8ULP_CLK_PCTLF>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 64 32>;
};
per_bridge5: bus@2d800000 {
compatible = "simple-bus";
reg = <0x2d800000 0x800000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
cgc2: clock-controller@2da60000 {
compatible = "fsl,imx8ulp-cgc2";
reg = <0x2da60000 0x10000>;
clocks = <&sosc>, <&frosc>;
clock-names = "sosc", "frosc";
#clock-cells = <1>;
};
pcc5: clock-controller@2da70000 {
compatible = "fsl,imx8ulp-pcc5";
reg = <0x2da70000 0x10000>;
#clock-cells = <1>;
};
};
gpiod: gpio@2e200000 {
compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
reg = <0x2e200080 0x1000>, <0x2e200040 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pcc5 IMX8ULP_CLK_RGPIOD>,
<&pcc5 IMX8ULP_CLK_RGPIOD>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 0 24>;
};
};
};

282
arch/arm64/boot/dts/freescale/mba8mx.dtsi Normal file
Просмотреть файл

@ -0,0 +1,282 @@
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Copyright 2020-2021 TQ-Systems GmbH
*/
#include <dt-bindings/net/ti-dp83867.h>
/* TQ-Systems GmbH MBa8Mx baseboard */
/ {
beeper {
compatible = "pwm-beeper";
pwms = <&pwm4 0 250000 0>;
beeper-hz = <4000>;
amp-supply = <&reg_vcc_3v3>;
};
chosen {
// bootargs = "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200";
stdout-path = &uart3;
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpiobutton>;
autorepeat;
switch1 {
label = "switch1";
linux,code = <BTN_0>;
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
wakeup-source;
};
btn2: switch2 {
label = "switch2";
linux,code = <BTN_1>;
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
wakeup-source;
};
switch3 {
label = "switch3";
linux,code = <BTN_2>;
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
wakeup-source;
};
};
gpio_leds: gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpioled>;
led1 {
label = "led1";
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
led2: led2 {
label = "led2";
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
reg_hub_vbus: regulator-hub-vbus {
compatible = "regulator-fixed";
regulator-name = "MBA8MX_HUB_VBUS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_sn65dsi83_1v8: regulator-sn65dsi83-1v8 {
compatible = "regulator-fixed";
regulator-name = "SN65DSI83_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&expander0 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_vcc_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "MBA8MX_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
sound {
compatible = "fsl,imx-audio-tlv320aic32x4";
model = "tqm-tlv320aic32";
ssi-controller = <&sai3>;
audio-codec = <&tlv320aic3x04>;
};
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
};
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
phy-supply = <&reg_vcc_3v3>;
fsl,magic-packet;
mac-address = [ 00 00 00 00 00 00 ];
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@e {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0xe>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,dp83867-rxctrl-strap-quirk;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
enet-phy-lane-no-swap;
reset-gpios = <&expander2 7 GPIO_ACTIVE_LOW>;
reset-assert-us = <500000>;
reset-deassert-us = <500>;
};
};
};
&i2c1 {
expander0: gpio@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
gpio-controller;
#gpio-cells = <2>;
vcc-supply = <&reg_vcc_3v3>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
sd-mux-oe-hog {
gpio-hog;
gpios = <8 0>;
output-low;
line-name = "SD_MUX_EN#";
};
boot-cfg-oe-hog {
gpio-hog;
gpios = <12 0>;
output-high;
line-name = "BOOT_CFG_OE#";
};
rst-usb-hub-hog {
gpio-hog;
gpios = <13 0>;
output-high;
line-name = "RST_USB_HUB#";
};
};
expander1: gpio@24 {
compatible = "nxp,pca9555";
reg = <0x24>;
gpio-controller;
#gpio-cells = <2>;
vcc-supply = <&reg_vcc_3v3>;
};
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
tlv320aic3x04: audio-codec@18 {
compatible = "ti,tlv320aic32x4";
reg = <0x18>;
reset-gpios = <&expander2 0 GPIO_ACTIVE_LOW>;
iov-supply = <&reg_vcc_3v3>;
ldoin-supply = <&reg_vcc_3v3>;
};
sensor1: sensor@1f {
compatible = "nxp,se97", "jedec,jc-42.4-temp";
reg = <0x1f>;
};
eeprom3: eeprom@57 {
compatible = "nxp,se97b", "atmel,24c02";
reg = <0x57>;
pagesize = <16>;
};
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
pinctrl-1 = <&pinctrl_i2c3_gpio>;
scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
};
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
#sound-dai-cells = <0>;
assigned-clock-rates = <49152000>;
status = "okay";
};
&snvs_pwrkey {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
/* console */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
/* UART4 is assigned to Cortex-M4 */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
bus-width = <4>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
disable-wp;
no-mmc;
no-sdio;
vmmc-supply = <&reg_usdhc2_vmmc>;
status = "okay";
};

26
include/dt-bindings/power/imx8ulp-power.h Normal file
Просмотреть файл

@ -0,0 +1,26 @@
/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
/*
* Copyright 2021 NXP
*/
#ifndef __DT_BINDINGS_IMX8ULP_POWER_H__
#define __DT_BINDINGS_IMX8ULP_POWER_H__
#define IMX8ULP_PD_DMA1 0
#define IMX8ULP_PD_FLEXSPI2 1
#define IMX8ULP_PD_USB0 2
#define IMX8ULP_PD_USDHC0 3
#define IMX8ULP_PD_USDHC1 4
#define IMX8ULP_PD_USDHC2_USB1 5
#define IMX8ULP_PD_DCNANO 6
#define IMX8ULP_PD_EPDC 7
#define IMX8ULP_PD_DMA2 8
#define IMX8ULP_PD_GPU2D 9
#define IMX8ULP_PD_GPU3D 10
#define IMX8ULP_PD_HIFI4 11
#define IMX8ULP_PD_ISI 12
#define IMX8ULP_PD_MIPI_CSI 13
#define IMX8ULP_PD_MIPI_DSI 14
#define IMX8ULP_PD_PXP 15
#endif