xhci: Add quirk to reset host back to default state at shutdown

Systems based on Alder Lake P see significant boot time delay if
boot firmware tries to control usb ports in unexpected link states.

This is seen with self-powered usb devices that survive in U3 link
suspended state over S5.

A more generic solution to power off ports at shutdown was attempted in
commit 83810f84ec ("xhci: turn off port power in shutdown")
but it caused regression.

Add host specific XHCI_RESET_TO_DEFAULT quirk which will reset host and
ports back to default state in shutdown.

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20221024142720.4122053-3-mathias.nyman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/host/xhci-pci.c

@@ -257,6 +257,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	     pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI))
 		xhci->quirks |= XHCI_MISSING_CAS;
 
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+	    pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI)
+		xhci->quirks |= XHCI_RESET_TO_DEFAULT;
+
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 	    (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI ||
 	     pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI ||

drivers/usb/host/xhci.c

@@ -810,9 +810,15 @@ void xhci_shutdown(struct usb_hcd *hcd)
 
 	spin_lock_irq(&xhci->lock);
 	xhci_halt(xhci);
-	/* Workaround for spurious wakeups at shutdown with HSW */
-	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+
+	/*
+	 * Workaround for spurious wakeps at shutdown with HSW, and for boot
+	 * firmware delay in ADL-P PCH if port are left in U3 at shutdown
+	 */
+	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP ||
+	    xhci->quirks & XHCI_RESET_TO_DEFAULT)
 		xhci_reset(xhci, XHCI_RESET_SHORT_USEC);
+
 	spin_unlock_irq(&xhci->lock);
 
 	xhci_cleanup_msix(xhci);

drivers/usb/host/xhci.h

@@ -1897,6 +1897,7 @@ struct xhci_hcd {
 #define XHCI_BROKEN_D3COLD	BIT_ULL(41)
 #define XHCI_EP_CTX_BROKEN_DCS	BIT_ULL(42)
 #define XHCI_SUSPEND_RESUME_CLKS	BIT_ULL(43)
+#define XHCI_RESET_TO_DEFAULT	BIT_ULL(44)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;