arm64: dts: bitmain: Add GPIO support for BM1880 SoC

Add GPIO support for Bitmain BM1880 SoC based on Designware APB GPIO
controller IP. IP exposes 3 GPIO controllers with a total of 72 pins.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm64/boot/dts/bitmain/bm1880.dtsi

@@ -80,6 +80,60 @@
 			#interrupt-cells = <3>;
 		};
 
+		gpio0: gpio@50027000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x50027000 0x0 0x400>;
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@50027400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x50027400 0x0 0x400>;
+
+			portb: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio2: gpio@50027800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x50027800 0x0 0x400>;
+
+			portc: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <8>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		uart0: serial@58018000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x58018000 0x0 0x2000>;