diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl index 5d259c632cdf..fea63b45471a 100644 --- a/Documentation/DocBook/media-entities.tmpl +++ b/Documentation/DocBook/media-entities.tmpl @@ -294,6 +294,7 @@ + diff --git a/Documentation/DocBook/v4l/media-ioc-setup-link.xml b/Documentation/DocBook/v4l/media-ioc-setup-link.xml index 2331e76ded17..cec97af4dab4 100644 --- a/Documentation/DocBook/v4l/media-ioc-setup-link.xml +++ b/Documentation/DocBook/v4l/media-ioc-setup-link.xml @@ -34,7 +34,7 @@ request - MEDIA_IOC_ENUM_LINKS + MEDIA_IOC_SETUP_LINK diff --git a/Documentation/DocBook/v4l/pixfmt-y12.xml b/Documentation/DocBook/v4l/pixfmt-y12.xml new file mode 100644 index 000000000000..ff417b858cc9 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-y12.xml @@ -0,0 +1,79 @@ + + + V4L2_PIX_FMT_Y12 ('Y12 ') + &manvol; + + + V4L2_PIX_FMT_Y12 + Grey-scale image + + + Description + + This is a grey-scale image with a depth of 12 bits per pixel. Pixels +are stored in 16-bit words with unused high bits padded with 0. The least +significant byte is stored at lower memory addresses (little-endian). + + + <constant>V4L2_PIX_FMT_Y12</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + Y'00low + Y'00high + Y'01low + Y'01high + Y'02low + Y'02high + Y'03low + Y'03high + + + start + 8: + Y'10low + Y'10high + Y'11low + Y'11high + Y'12low + Y'12high + Y'13low + Y'13high + + + start + 16: + Y'20low + Y'20high + Y'21low + Y'21high + Y'22low + Y'22high + Y'23low + Y'23high + + + start + 24: + Y'30low + Y'30high + Y'31low + Y'31high + Y'32low + Y'32high + Y'33low + Y'33high + + + + + + + + + diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml index c6fdcbbd1b41..40af4beb48b9 100644 --- a/Documentation/DocBook/v4l/pixfmt.xml +++ b/Documentation/DocBook/v4l/pixfmt.xml @@ -696,6 +696,7 @@ information. &sub-packed-yuv; &sub-grey; &sub-y10; + &sub-y12; &sub-y16; &sub-yuyv; &sub-uyvy; diff --git a/Documentation/DocBook/v4l/subdev-formats.xml b/Documentation/DocBook/v4l/subdev-formats.xml index 7041127d6dfc..d7ccd25edcc1 100644 --- a/Documentation/DocBook/v4l/subdev-formats.xml +++ b/Documentation/DocBook/v4l/subdev-formats.xml @@ -456,6 +456,23 @@ b1 b0 + + V4L2_MBUS_FMT_SGBRG8_1X8 + 0x3013 + + - + - + - + - + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + V4L2_MBUS_FMT_SGRBG8_1X8 0x3002 @@ -473,6 +490,23 @@ g1 g0 + + V4L2_MBUS_FMT_SRGGB8_1X8 + 0x3014 + + - + - + - + - + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 0x300b @@ -2159,6 +2193,31 @@ u1 u0 + + V4L2_MBUS_FMT_Y12_1X12 + 0x2013 + + - + - + - + - + - + - + - + - + y11 + y10 + y9 + y8 + y7 + y6 + y5 + y4 + y3 + y2 + y1 + y0 + V4L2_MBUS_FMT_UYVY8_1X16 0x200f diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index b6ed61c95856..7c163477fcd8 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -52,8 +52,10 @@ Brief summary of control files. tasks # attach a task(thread) and show list of threads cgroup.procs # show list of processes cgroup.event_control # an interface for event_fd() - memory.usage_in_bytes # show current memory(RSS+Cache) usage. - memory.memsw.usage_in_bytes # show current memory+Swap usage + memory.usage_in_bytes # show current res_counter usage for memory + (See 5.5 for details) + memory.memsw.usage_in_bytes # show current res_counter usage for memory+Swap + (See 5.5 for details) memory.limit_in_bytes # set/show limit of memory usage memory.memsw.limit_in_bytes # set/show limit of memory+Swap usage memory.failcnt # show the number of memory usage hits limits @@ -453,6 +455,15 @@ memory under it will be reclaimed. You can reset failcnt by writing 0 to failcnt file. # echo 0 > .../memory.failcnt +5.5 usage_in_bytes + +For efficiency, as other kernel components, memory cgroup uses some optimization +to avoid unnecessary cacheline false sharing. usage_in_bytes is affected by the +method and doesn't show 'exact' value of memory(and swap) usage, it's an fuzz +value for efficient access. (Of course, when necessary, it's synchronized.) +If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP) +value in memory.stat(see 5.2). + 6. Hierarchy support The memory controller supports a deep hierarchy and hierarchical accounting. diff --git a/Documentation/hwmon/adm1021 b/Documentation/hwmon/adm1021 index 03d02bfb3df1..02ad96cf9b2b 100644 --- a/Documentation/hwmon/adm1021 +++ b/Documentation/hwmon/adm1021 @@ -14,10 +14,6 @@ Supported chips: Prefix: 'gl523sm' Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e Datasheet: - * Intel Xeon Processor - Prefix: - any other - may require 'force_adm1021' parameter - Addresses scanned: none - Datasheet: Publicly available at Intel website * Maxim MAX1617 Prefix: 'max1617' Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e @@ -91,21 +87,27 @@ will do no harm, but will return 'old' values. It is possible to make ADM1021-clones do faster measurements, but there is really no good reason for that. -Xeon support ------------- -Some Xeon processors have real max1617, adm1021, or compatible chips -within them, with two temperature sensors. +Netburst-based Xeon support +--------------------------- -Other Xeons have chips with only one sensor. +Some Xeon processors based on the Netburst (early Pentium 4, from 2001 to +2003) microarchitecture had real MAX1617, ADM1021, or compatible chips +within them, with two temperature sensors. Other Xeon processors of this +era (with 400 MHz FSB) had chips with only one temperature sensor. -If you have a Xeon, and the adm1021 module loads, and both temperatures -appear valid, then things are good. +If you have such an old Xeon, and you get two valid temperatures when +loading the adm1021 module, then things are good. -If the adm1021 module doesn't load, you should try this: - modprobe adm1021 force_adm1021=BUS,ADDRESS - ADDRESS can only be 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e. +If nothing happens when loading the adm1021 module, and you are certain +that your specific Xeon processor model includes compatible sensors, you +will have to explicitly instantiate the sensor chips from user-space. See +method 4 in Documentation/i2c/instantiating-devices. Possible slave +addresses are 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e. It is likely that +only temp2 will be correct and temp1 will have to be ignored. -If you have dual Xeons you may have appear to have two separate -adm1021-compatible chips, or two single-temperature sensors, at distinct -addresses. +Previous generations of the Xeon processor (based on Pentium II/III) +didn't have these sensors. Next generations of Xeon processors (533 MHz +FSB and faster) lost them, until the Core-based generation which +introduced integrated digital thermal sensors. These are supported by +the coretemp driver. diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index fa475c0a48a3..f3efd18e87f4 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -32,6 +32,16 @@ Supported chips: Addresses scanned: I2C 0x4c and 0x4d Datasheet: Publicly available at the ON Semiconductor website http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461 + * Analog Devices ADT7461A + Prefix: 'adt7461a' + Addresses scanned: I2C 0x4c and 0x4d + Datasheet: Publicly available at the ON Semiconductor website + http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461A + * ON Semiconductor NCT1008 + Prefix: 'nct1008' + Addresses scanned: I2C 0x4c and 0x4d + Datasheet: Publicly available at the ON Semiconductor website + http://www.onsemi.com/PowerSolutions/product.do?id=NCT1008 * Maxim MAX6646 Prefix: 'max6646' Addresses scanned: I2C 0x4d @@ -149,7 +159,7 @@ ADM1032: * ALERT is triggered by open remote sensor. * SMBus PEC support for Write Byte and Receive Byte transactions. -ADT7461: +ADT7461, ADT7461A, NCT1008: * Extended temperature range (breaks compatibility) * Lower resolution for remote temperature @@ -195,9 +205,9 @@ are exported, one for each channel, but these values are of course linked. Only the local hysteresis can be set from user-space, and the same delta applies to the remote hysteresis. -The lm90 driver will not update its values more frequently than every -other second; reading them more often will do no harm, but will return -'old' values. +The lm90 driver will not update its values more frequently than configured with +the update_interval attribute; reading them more often will do no harm, but will +return 'old' values. SMBus Alert Support ------------------- @@ -205,11 +215,12 @@ SMBus Alert Support This driver has basic support for SMBus alert. When an alert is received, the status register is read and the faulty temperature channel is logged. -The Analog Devices chips (ADM1032 and ADT7461) do not implement the SMBus -alert protocol properly so additional care is needed: the ALERT output is -disabled when an alert is received, and is re-enabled only when the alarm -is gone. Otherwise the chip would block alerts from other chips in the bus -as long as the alarm is active. +The Analog Devices chips (ADM1032, ADT7461 and ADT7461A) and ON +Semiconductor chips (NCT1008) do not implement the SMBus alert protocol +properly so additional care is needed: the ALERT output is disabled when +an alert is received, and is re-enabled only when the alarm is gone. +Otherwise the chip would block alerts from other chips in the bus as long +as the alarm is active. PEC Support ----------- diff --git a/Documentation/video4linux/sh_mobile_ceu_camera.txt b/Documentation/video4linux/sh_mobile_ceu_camera.txt index cb47e723af74..1e96ce6e2d2f 100644 --- a/Documentation/video4linux/sh_mobile_ceu_camera.txt +++ b/Documentation/video4linux/sh_mobile_ceu_camera.txt @@ -37,7 +37,7 @@ Generic scaling / cropping scheme -1'- In the above chart minuses and slashes represent "real" data amounts, points and -accents represent "useful" data, basically, CEU scaled amd cropped output, +accents represent "useful" data, basically, CEU scaled and cropped output, mapped back onto the client's source plane. Such a configuration can be produced by user requests: @@ -65,7 +65,7 @@ Do not touch input rectangle - it is already optimal. 1. Calculate current sensor scales: - scale_s = ((3') - (3)) / ((2') - (2)) + scale_s = ((2') - (2)) / ((3') - (3)) 2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at current sensor scales onto input window - this is user S_CROP: @@ -80,7 +80,7 @@ window: 4. Calculate sensor output window by applying combined scales to real input window: - width_s_out = ((2') - (2)) / scale_comb + width_s_out = ((7') - (7)) = ((2') - (2)) / scale_comb 5. Apply iterative sensor S_FMT for sensor output window. diff --git a/Documentation/workqueue.txt b/Documentation/workqueue.txt index 01c513fac40e..a0b577de918f 100644 --- a/Documentation/workqueue.txt +++ b/Documentation/workqueue.txt @@ -12,6 +12,7 @@ CONTENTS 4. Application Programming Interface (API) 5. Example Execution Scenarios 6. Guidelines +7. Debugging 1. Introduction @@ -379,3 +380,42 @@ If q1 has WQ_CPU_INTENSIVE set, * Unless work items are expected to consume a huge amount of CPU cycles, using a bound wq is usually beneficial due to the increased level of locality in wq operations and work item execution. + + +7. Debugging + +Because the work functions are executed by generic worker threads +there are a few tricks needed to shed some light on misbehaving +workqueue users. + +Worker threads show up in the process list as: + +root 5671 0.0 0.0 0 0 ? S 12:07 0:00 [kworker/0:1] +root 5672 0.0 0.0 0 0 ? S 12:07 0:00 [kworker/1:2] +root 5673 0.0 0.0 0 0 ? S 12:12 0:00 [kworker/0:0] +root 5674 0.0 0.0 0 0 ? S 12:13 0:00 [kworker/1:0] + +If kworkers are going crazy (using too much cpu), there are two types +of possible problems: + + 1. Something beeing scheduled in rapid succession + 2. A single work item that consumes lots of cpu cycles + +The first one can be tracked using tracing: + + $ echo workqueue:workqueue_queue_work > /sys/kernel/debug/tracing/set_event + $ cat /sys/kernel/debug/tracing/trace_pipe > out.txt + (wait a few secs) + ^C + +If something is busy looping on work queueing, it would be dominating +the output and the offender can be determined with the work item +function. + +For the second type of problems it should be possible to just check +the stack trace of the offending worker thread. + + $ cat /proc/THE_OFFENDING_KWORKER/stack + +The work item's function should be trivially visible in the stack +trace. diff --git a/MAINTAINERS b/MAINTAINERS index 13803127b68f..2199ba1323d2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1032,12 +1032,13 @@ W: http://www.fluff.org/ben/linux/ S: Maintained F: arch/arm/mach-s3c64xx/ -ARM/S5P ARM ARCHITECTURES +ARM/S5P EXYNOS ARM ARCHITECTURES M: Kukjin Kim L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-s5p*/ +F: arch/arm/mach-exynos*/ ARM/SAMSUNG MOBILE MACHINE SUPPORT M: Kyungmin Park @@ -2808,7 +2809,7 @@ GPIO SUBSYSTEM M: Grant Likely S: Maintained T: git git://git.secretlab.ca/git/linux-2.6.git -F: Documentation/gpio/gpio.txt +F: Documentation/gpio.txt F: drivers/gpio/ F: include/linux/gpio* @@ -6921,6 +6922,18 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86. S: Maintained F: drivers/platform/x86 +XEN HYPERVISOR INTERFACE +M: Jeremy Fitzhardinge +M: Konrad Rzeszutek Wilk +L: xen-devel@lists.xensource.com (moderated for non-subscribers) +L: virtualization@lists.linux-foundation.org +S: Supported +F: arch/x86/xen/ +F: drivers/*/xen-*front.c +F: drivers/xen/ +F: arch/x86/include/asm/xen/ +F: include/xen/ + XEN NETWORK BACKEND DRIVER M: Ian Campbell L: xen-devel@lists.xensource.com (moderated for non-subscribers) @@ -6942,18 +6955,6 @@ S: Supported F: arch/x86/xen/*swiotlb* F: drivers/xen/*swiotlb* -XEN HYPERVISOR INTERFACE -M: Jeremy Fitzhardinge -M: Konrad Rzeszutek Wilk -L: xen-devel@lists.xensource.com (moderated for non-subscribers) -L: virtualization@lists.linux-foundation.org -S: Supported -F: arch/x86/xen/ -F: drivers/*/xen-*front.c -F: drivers/xen/ -F: arch/x86/include/asm/xen/ -F: include/xen/ - XFS FILESYSTEM P: Silicon Graphics Inc M: Alex Elder diff --git a/Makefile b/Makefile index b967b967572b..5a7a2e4f5c0b 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 39 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Flesh-Eating Bats with Fangs # *DOCUMENTATION* diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index f68012239641..a3a94e9c9378 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -314,7 +314,7 @@ static struct clk timer2_clk = { .name = "timer2", .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why can't' this be disabled? */ + .usecount = 1, /* REVISIT: why can't this be disabled? */ }; static struct clk timer3_clk = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 5f8a65424184..4c82c2716293 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -274,7 +274,7 @@ static struct clk timer2_clk = { .name = "timer2", .parent = &pll1_aux_clk, .lpsc = DAVINCI_LPSC_TIMER2, - .usecount = 1, /* REVISIT: why can't' this be disabled? */ + .usecount = 1, /* REVISIT: why can't this be disabled? */ }; static struct clk_lookup dm644x_clks[] = { diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index a45cd6409686..512b15204450 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -68,7 +68,7 @@ obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o AFLAGS_sleep24xx.o :=-Wa,-march=armv6 -AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a +AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a$(plus_sec) ifeq ($(CONFIG_PM_VERBOSE),y) CFLAGS_pm_bus.o += -DDEBUG diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index e964895b80e8..f8ba20a14e62 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -141,14 +141,19 @@ static void __init rx51_init(void) static void __init rx51_map_io(void) { omap2_set_globals_3xxx(); - rx51_video_mem_init(); omap34xx_map_common_io(); } +static void __init rx51_reserve(void) +{ + rx51_video_mem_init(); + omap_reserve(); +} + MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") /* Maintainer: Lauri Leukkunen */ .boot_params = 0x80000100, - .reserve = omap_reserve, + .reserve = rx51_reserve, .map_io = rx51_map_io, .init_early = rx51_init_early, .init_irq = omap_init_irq, diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 276992d3b7fb..8c965671b4d4 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3116,14 +3116,9 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "dsp_fck", &dsp_fck, CK_443X), CLK("omapdss_dss", "sys_clk", &dss_sys_clk, CK_443X), CLK("omapdss_dss", "tv_clk", &dss_tv_clk, CK_443X), - CLK("omapdss_dss", "dss_clk", &dss_dss_clk, CK_443X), CLK("omapdss_dss", "video_clk", &dss_48mhz_clk, CK_443X), - CLK("omapdss_dss", "fck", &dss_fck, CK_443X), - /* - * On OMAP4, DSS ick is a dummy clock; this is needed for compatibility - * with OMAP2/3. - */ - CLK("omapdss_dss", "ick", &dummy_ck, CK_443X), + CLK("omapdss_dss", "fck", &dss_dss_clk, CK_443X), + CLK("omapdss_dss", "ick", &dss_fck, CK_443X), CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X), CLK(NULL, "emif1_fck", &emif1_fck, CK_443X), CLK(NULL, "emif2_fck", &emif2_fck, CK_443X), diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c index 9d0dec806e92..38830d8d4783 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c @@ -247,6 +247,7 @@ struct omap3_cm_regs { u32 per_cm_clksel; u32 emu_cm_clksel; u32 emu_cm_clkstctrl; + u32 pll_cm_autoidle; u32 pll_cm_autoidle2; u32 pll_cm_clksel4; u32 pll_cm_clksel5; @@ -319,6 +320,15 @@ void omap3_cm_save_context(void) omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1); cm_context.emu_cm_clkstctrl = omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1. + * In this case, even though this register has been saved in + * scratchpad contents, we need to restore AUTO_PERIPH_DPLL + * by ourselves. So, we need to save it anyway. + */ + cm_context.pll_cm_autoidle = + omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE); cm_context.pll_cm_autoidle2 = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2); cm_context.pll_cm_clksel4 = @@ -441,6 +451,13 @@ void omap3_cm_restore_context(void) CM_CLKSEL1); omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1. + * In this case, we need to restore AUTO_PERIPH_DPLL by ourselves. + */ + omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle, PLL_MOD, + CM_AUTOIDLE); omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD, CM_AUTOIDLE2); omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD, diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 695279419020..da53ba3917ca 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -316,8 +316,14 @@ void omap3_save_scratchpad_contents(void) omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL); prcm_block_contents.cm_clken_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN); + /* + * As per erratum i671, ROM code does not respect the PER DPLL + * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1. + * Then, in anycase, clear these bits to avoid extra latencies. + */ prcm_block_contents.cm_autoidle_pll = - omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL); + omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) & + ~OMAP3430_AUTO_PERIPH_DPLL_MASK; prcm_block_contents.cm_clksel1_pll = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL); prcm_block_contents.cm_clksel2_pll = diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index 8eb3ce1bbfbe..c4d0ae87d62a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1639,6 +1639,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = { static struct omap_hwmod omap2420_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio1_irqs), .main_clk = "gpios_fck", @@ -1669,6 +1670,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = { static struct omap_hwmod omap2420_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio2_irqs), .main_clk = "gpios_fck", @@ -1699,6 +1701,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = { static struct omap_hwmod omap2420_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio3_irqs), .main_clk = "gpios_fck", @@ -1729,6 +1732,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = { static struct omap_hwmod omap2420_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap242x_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio4_irqs), .main_clk = "gpios_fck", @@ -1782,7 +1786,7 @@ static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index e6e3810db77f..9682dd519f8d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1742,6 +1742,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = { static struct omap_hwmod omap2430_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio1_irqs), .main_clk = "gpios_fck", @@ -1772,6 +1773,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = { static struct omap_hwmod omap2430_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio2_irqs), .main_clk = "gpios_fck", @@ -1802,6 +1804,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = { static struct omap_hwmod omap2430_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio3_irqs), .main_clk = "gpios_fck", @@ -1832,6 +1835,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = { static struct omap_hwmod omap2430_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio4_irqs), .main_clk = "gpios_fck", @@ -1862,6 +1866,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = { static struct omap_hwmod omap2430_gpio5_hwmod = { .name = "gpio5", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio5_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio5_irqs), .main_clk = "gpio5_fck", @@ -1915,7 +1920,7 @@ static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index b98e2dfcba28..909a84de6682 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2141,6 +2141,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = { static struct omap_hwmod omap3xxx_gpio1_hwmod = { .name = "gpio1", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio1_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio1_irqs), .main_clk = "gpio1_ick", @@ -2177,6 +2178,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = { static struct omap_hwmod omap3xxx_gpio2_hwmod = { .name = "gpio2", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio2_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio2_irqs), .main_clk = "gpio2_ick", @@ -2213,6 +2215,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = { static struct omap_hwmod omap3xxx_gpio3_hwmod = { .name = "gpio3", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio3_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio3_irqs), .main_clk = "gpio3_ick", @@ -2249,6 +2252,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = { static struct omap_hwmod omap3xxx_gpio4_hwmod = { .name = "gpio4", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio4_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio4_irqs), .main_clk = "gpio4_ick", @@ -2285,6 +2289,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = { static struct omap_hwmod omap3xxx_gpio5_hwmod = { .name = "gpio5", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio5_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio5_irqs), .main_clk = "gpio5_ick", @@ -2321,6 +2326,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = { static struct omap_hwmod omap3xxx_gpio6_hwmod = { .name = "gpio6", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio6_irqs, .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio6_irqs), .main_clk = "gpio6_ick", @@ -2386,7 +2392,7 @@ static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = { static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = { { .pa_start = 0x48056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3e88dd3f8ef3..abc548a0c98d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -885,7 +885,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = { static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = { { .pa_start = 0x4a056000, - .pa_end = 0x4a0560ff, + .pa_end = 0x4a056fff, .flags = ADDR_TYPE_RT }, }; diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index 5f2da7565b68..4321e7938929 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -196,11 +196,11 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) /* No timeout error for debug sources */ } - base = ((l3->rt) + (*(omap3_l3_bases[int_type] + err_source))); - /* identify the error source */ for (err_source = 0; !(status & (1 << err_source)); err_source++) ; + + base = l3->rt + *(omap3_l3_bases[int_type] + err_source); error = omap3_l3_readll(base, L3_ERROR_LOG); if (error) { diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 30af3351c2d6..49486f522dca 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -89,6 +89,7 @@ static void omap2_init_processor_devices(void) if (cpu_is_omap44xx()) { _init_omap_device("l3_main_1", &l3_dev); _init_omap_device("dsp", &dsp_dev); + _init_omap_device("iva", &iva_dev); } else { _init_omap_device("l3_main", &l3_dev); } diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 6fb520999b6e..0c1552d9d995 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -114,7 +114,6 @@ static int __init _config_common_vdd_data(struct omap_vdd_info *vdd) sys_clk_speed /= 1000; /* Generic voltage parameters */ - vdd->curr_volt = 1200000; vdd->volt_scale = vp_forceupdate_scale_voltage; vdd->vp_enabled = false; diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c index 02b7a03e4226..8b3db1c587fc 100644 --- a/arch/m68k/mm/motorola.c +++ b/arch/m68k/mm/motorola.c @@ -300,6 +300,8 @@ void __init paging_init(void) zones_size[ZONE_DMA] = m68k_memory[i].size >> PAGE_SHIFT; free_area_init_node(i, zones_size, m68k_memory[i].addr >> PAGE_SHIFT, NULL); + if (node_present_pages(i)) + node_set_state(i, N_NORMAL_MEMORY); } } diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index b7ed8d7a9b33..b1d126258dee 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -266,8 +266,10 @@ static void __init setup_bootmem(void) } memset(pfnnid_map, 0xff, sizeof(pfnnid_map)); - for (i = 0; i < npmem_ranges; i++) + for (i = 0; i < npmem_ranges; i++) { + node_set_state(i, N_NORMAL_MEMORY); node_set_online(i); + } #endif /* diff --git a/arch/powerpc/include/asm/uninorth.h b/arch/powerpc/include/asm/uninorth.h index ae9c899c8a6d..d12b11d7641e 100644 --- a/arch/powerpc/include/asm/uninorth.h +++ b/arch/powerpc/include/asm/uninorth.h @@ -60,7 +60,7 @@ * * Obviously, the GART is not cache coherent and so any change to it * must be flushed to memory (or maybe just make the GART space non - * cachable). AGP memory itself does't seem to be cache coherent neither. + * cachable). AGP memory itself doesn't seem to be cache coherent neither. * * In order to invalidate the GART (which is probably necessary to inval * the bridge internal TLBs), the following sequence has to be written, diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c index 44bca3f994b0..8b16c479585b 100644 --- a/arch/s390/crypto/prng.c +++ b/arch/s390/crypto/prng.c @@ -76,7 +76,7 @@ static void prng_seed(int nbytes) /* Add the entropy */ while (nbytes >= 8) { - *((__u64 *)parm_block) ^= *((__u64 *)buf+i); + *((__u64 *)parm_block) ^= *((__u64 *)(buf+i)); prng_add_entropy(); i += 8; nbytes -= 8; diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 4cf85fef407c..ab988135e5c6 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -543,7 +543,6 @@ static void pfault_interrupt(unsigned int ext_int_code, struct task_struct *tsk; __u16 subcode; - kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++; /* * Get the external interruption subcode & pfault * initial/completion signal bit. VM stores this @@ -553,6 +552,7 @@ static void pfault_interrupt(unsigned int ext_int_code, subcode = ext_int_code >> 16; if ((subcode & 0xff00) != __SUBCODE_MASK) return; + kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++; /* * Get the token (= address of the task structure of the affected task). diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um index 90a438acbfaf..b5e675e370c6 100644 --- a/arch/um/Kconfig.um +++ b/arch/um/Kconfig.um @@ -47,7 +47,7 @@ config HOSTFS config HPPFS tristate "HoneyPot ProcFS (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on EXPERIMENTAL && PROC_FS help hppfs (HoneyPot ProcFS) is a filesystem which allows UML /proc entries to be overridden, removed, or fabricated from the host. diff --git a/arch/um/include/asm/thread_info.h b/arch/um/include/asm/thread_info.h index e2cf786bda0a..5bd1bad33fab 100644 --- a/arch/um/include/asm/thread_info.h +++ b/arch/um/include/asm/thread_info.h @@ -49,7 +49,10 @@ static inline struct thread_info *current_thread_info(void) { struct thread_info *ti; unsigned long mask = THREAD_SIZE - 1; - ti = (struct thread_info *) (((unsigned long) &ti) & ~mask); + void *p; + + asm volatile ("" : "=r" (p) : "0" (&ti)); + ti = (struct thread_info *) (((unsigned long)p) & ~mask); return ti; } diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile index 804b28dd0328..b1da91c1b200 100644 --- a/arch/um/sys-i386/Makefile +++ b/arch/um/sys-i386/Makefile @@ -4,7 +4,7 @@ obj-y = bug.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \ ptrace_user.o setjmp.o signal.o stub.o stub_segv.o syscalls.o sysrq.o \ - sys_call_table.o tls.o + sys_call_table.o tls.o atomic64_cx8_32.o obj-$(CONFIG_BINFMT_ELF) += elfcore.o diff --git a/arch/um/sys-i386/atomic64_cx8_32.S b/arch/um/sys-i386/atomic64_cx8_32.S new file mode 100644 index 000000000000..1e901d3d4a95 --- /dev/null +++ b/arch/um/sys-i386/atomic64_cx8_32.S @@ -0,0 +1,225 @@ +/* + * atomic64_t for 586+ + * + * Copied from arch/x86/lib/atomic64_cx8_32.S + * + * Copyright © 2010 Luca Barbieri + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include + +.macro SAVE reg + pushl_cfi %\reg + CFI_REL_OFFSET \reg, 0 +.endm + +.macro RESTORE reg + popl_cfi %\reg + CFI_RESTORE \reg +.endm + +.macro read64 reg + movl %ebx, %eax + movl %ecx, %edx +/* we need LOCK_PREFIX since otherwise cmpxchg8b always does the write */ + LOCK_PREFIX + cmpxchg8b (\reg) +.endm + +ENTRY(atomic64_read_cx8) + CFI_STARTPROC + + read64 %ecx + ret + CFI_ENDPROC +ENDPROC(atomic64_read_cx8) + +ENTRY(atomic64_set_cx8) + CFI_STARTPROC + +1: +/* we don't need LOCK_PREFIX since aligned 64-bit writes + * are atomic on 586 and newer */ + cmpxchg8b (%esi) + jne 1b + + ret + CFI_ENDPROC +ENDPROC(atomic64_set_cx8) + +ENTRY(atomic64_xchg_cx8) + CFI_STARTPROC + + movl %ebx, %eax + movl %ecx, %edx +1: + LOCK_PREFIX + cmpxchg8b (%esi) + jne 1b + + ret + CFI_ENDPROC +ENDPROC(atomic64_xchg_cx8) + +.macro addsub_return func ins insc +ENTRY(atomic64_\func\()_return_cx8) + CFI_STARTPROC + SAVE ebp + SAVE ebx + SAVE esi + SAVE edi + + movl %eax, %esi + movl %edx, %edi + movl %ecx, %ebp + + read64 %ebp +1: + movl %eax, %ebx + movl %edx, %ecx + \ins\()l %esi, %ebx + \insc\()l %edi, %ecx + LOCK_PREFIX + cmpxchg8b (%ebp) + jne 1b + +10: + movl %ebx, %eax + movl %ecx, %edx + RESTORE edi + RESTORE esi + RESTORE ebx + RESTORE ebp + ret + CFI_ENDPROC +ENDPROC(atomic64_\func\()_return_cx8) +.endm + +addsub_return add add adc +addsub_return sub sub sbb + +.macro incdec_return func ins insc +ENTRY(atomic64_\func\()_return_cx8) + CFI_STARTPROC + SAVE ebx + + read64 %esi +1: + movl %eax, %ebx + movl %edx, %ecx + \ins\()l $1, %ebx + \insc\()l $0, %ecx + LOCK_PREFIX + cmpxchg8b (%esi) + jne 1b + +10: + movl %ebx, %eax + movl %ecx, %edx + RESTORE ebx + ret + CFI_ENDPROC +ENDPROC(atomic64_\func\()_return_cx8) +.endm + +incdec_return inc add adc +incdec_return dec sub sbb + +ENTRY(atomic64_dec_if_positive_cx8) + CFI_STARTPROC + SAVE ebx + + read64 %esi +1: + movl %eax, %ebx + movl %edx, %ecx + subl $1, %ebx + sbb $0, %ecx + js 2f + LOCK_PREFIX + cmpxchg8b (%esi) + jne 1b + +2: + movl %ebx, %eax + movl %ecx, %edx + RESTORE ebx + ret + CFI_ENDPROC +ENDPROC(atomic64_dec_if_positive_cx8) + +ENTRY(atomic64_add_unless_cx8) + CFI_STARTPROC + SAVE ebp + SAVE ebx +/* these just push these two parameters on the stack */ + SAVE edi + SAVE esi + + movl %ecx, %ebp + movl %eax, %esi + movl %edx, %edi + + read64 %ebp +1: + cmpl %eax, 0(%esp) + je 4f +2: + movl %eax, %ebx + movl %edx, %ecx + addl %esi, %ebx + adcl %edi, %ecx + LOCK_PREFIX + cmpxchg8b (%ebp) + jne 1b + + movl $1, %eax +3: + addl $8, %esp + CFI_ADJUST_CFA_OFFSET -8 + RESTORE ebx + RESTORE ebp + ret +4: + cmpl %edx, 4(%esp) + jne 2b + xorl %eax, %eax + jmp 3b + CFI_ENDPROC +ENDPROC(atomic64_add_unless_cx8) + +ENTRY(atomic64_inc_not_zero_cx8) + CFI_STARTPROC + SAVE ebx + + read64 %esi +1: + testl %eax, %eax + je 4f +2: + movl %eax, %ebx + movl %edx, %ecx + addl $1, %ebx + adcl $0, %ecx + LOCK_PREFIX + cmpxchg8b (%esi) + jne 1b + + movl $1, %eax +3: + RESTORE ebx + ret +4: + testl %edx, %edx + jne 2b + jmp 3b + CFI_ENDPROC +ENDPROC(atomic64_inc_not_zero_cx8) diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c index cae3feb1035e..db75d07c3645 100644 --- a/arch/x86/boot/memory.c +++ b/arch/x86/boot/memory.c @@ -91,7 +91,7 @@ static int detect_memory_e801(void) if (oreg.ax > 15*1024) { return -1; /* Bogus! */ } else if (oreg.ax == 15*1024) { - boot_params.alt_mem_k = (oreg.dx << 6) + oreg.ax; + boot_params.alt_mem_k = (oreg.bx << 6) + oreg.ax; } else { /* * This ignores memory above 16MB if we have a memory diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index c4bd267dfc50..a97a240f67f3 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -150,7 +150,7 @@ void setup_IO_APIC_irq_extra(u32 gsi); extern void ioapic_and_gsi_init(void); extern void ioapic_insert_resources(void); -int io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr); +int io_apic_setup_irq_pin_once(unsigned int irq, int node, struct io_apic_irq_attr *attr); extern struct IO_APIC_route_entry **alloc_ioapic_entries(void); extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries); diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 68df09bba92e..45fd33d1fd3a 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -128,8 +128,8 @@ static int __init parse_noapic(char *str) } early_param("noapic", parse_noapic); -static int io_apic_setup_irq_pin_once(unsigned int irq, int node, - struct io_apic_irq_attr *attr); +static int io_apic_setup_irq_pin(unsigned int irq, int node, + struct io_apic_irq_attr *attr); /* Will be called in mpparse/acpi/sfi codes for saving IRQ info */ void mp_save_irq(struct mpc_intsrc *m) @@ -3570,7 +3570,7 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) } #endif /* CONFIG_HT_IRQ */ -int +static int io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr) { struct irq_cfg *cfg = alloc_irq_and_cfg_at(irq, node); @@ -3585,8 +3585,8 @@ io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr) return ret; } -static int io_apic_setup_irq_pin_once(unsigned int irq, int node, - struct io_apic_irq_attr *attr) +int io_apic_setup_irq_pin_once(unsigned int irq, int node, + struct io_apic_irq_attr *attr) { unsigned int id = attr->ioapic, pin = attr->ioapic_pin; int ret; diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 632e5dc9c9c0..e638689279d3 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -613,8 +613,8 @@ static int x86_setup_perfctr(struct perf_event *event) /* * Branch tracing: */ - if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) && - (hwc->sample_period == 1)) { + if (attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS && + !attr->freq && hwc->sample_period == 1) { /* BTS is not supported by this architecture. */ if (!x86_pmu.bts_active) return -EOPNOTSUPP; @@ -1288,6 +1288,16 @@ static int x86_pmu_handle_irq(struct pt_regs *regs) cpuc = &__get_cpu_var(cpu_hw_events); + /* + * Some chipsets need to unmask the LVTPC in a particular spot + * inside the nmi handler. As a result, the unmasking was pushed + * into all the nmi handlers. + * + * This generic handler doesn't seem to have any issues where the + * unmasking occurs so it was left at the top. + */ + apic_write(APIC_LVTPC, APIC_DM_NMI); + for (idx = 0; idx < x86_pmu.num_counters; idx++) { if (!test_bit(idx, cpuc->active_mask)) { /* @@ -1374,8 +1384,6 @@ perf_event_nmi_handler(struct notifier_block *self, return NOTIFY_DONE; } - apic_write(APIC_LVTPC, APIC_DM_NMI); - handled = x86_pmu.handle_irq(args->regs); if (!handled) return NOTIFY_DONE; diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 43fa20b13817..e61539b07d2c 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -25,7 +25,7 @@ struct intel_percore { /* * Intel PerfMon, used on Core and later. */ -static const u64 intel_perfmon_event_map[] = +static u64 intel_perfmon_event_map[PERF_COUNT_HW_MAX] __read_mostly = { [PERF_COUNT_HW_CPU_CYCLES] = 0x003c, [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, @@ -933,6 +933,16 @@ static int intel_pmu_handle_irq(struct pt_regs *regs) cpuc = &__get_cpu_var(cpu_hw_events); + /* + * Some chipsets need to unmask the LVTPC in a particular spot + * inside the nmi handler. As a result, the unmasking was pushed + * into all the nmi handlers. + * + * This handler doesn't seem to have any issues with the unmasking + * so it was left at the top. + */ + apic_write(APIC_LVTPC, APIC_DM_NMI); + intel_pmu_disable_all(); handled = intel_pmu_drain_bts_buffer(); status = intel_pmu_get_status(); @@ -998,6 +1008,9 @@ intel_bts_constraints(struct perf_event *event) struct hw_perf_event *hwc = &event->hw; unsigned int hw_event, bts_event; + if (event->attr.freq) + return NULL; + hw_event = hwc->config & INTEL_ARCH_EVENT_MASK; bts_event = x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS); @@ -1305,7 +1318,7 @@ static void intel_clovertown_quirks(void) * AJ106 could possibly be worked around by not allowing LBR * usage from PEBS, including the fixup. * AJ68 could possibly be worked around by always programming - * a pebs_event_reset[0] value and coping with the lost events. + * a pebs_event_reset[0] value and coping with the lost events. * * But taken together it might just make sense to not enable PEBS on * these chips. @@ -1409,6 +1422,18 @@ static __init int intel_pmu_init(void) x86_pmu.percore_constraints = intel_nehalem_percore_constraints; x86_pmu.enable_all = intel_pmu_nhm_enable_all; x86_pmu.extra_regs = intel_nehalem_extra_regs; + + if (ebx & 0x40) { + /* + * Erratum AAJ80 detected, we work it around by using + * the BR_MISP_EXEC.ANY event. This will over-count + * branch-misses, but it's still much better than the + * architectural event which is often completely bogus: + */ + intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89; + + pr_cont("erratum AAJ80 worked around, "); + } pr_cont("Nehalem events, "); break; diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index d1f77e2934a1..e93fcd55fae1 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -950,11 +950,20 @@ static int p4_pmu_handle_irq(struct pt_regs *regs) x86_pmu_stop(event, 0); } - if (handled) { - /* p4 quirk: unmask it again */ - apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED); + if (handled) inc_irq_stat(apic_perf_irqs); - } + + /* + * When dealing with the unmasking of the LVTPC on P4 perf hw, it has + * been observed that the OVF bit flag has to be cleared first _before_ + * the LVTPC can be unmasked. + * + * The reason is the NMI line will continue to be asserted while the OVF + * bit is set. This causes a second NMI to generate if the LVTPC is + * unmasked before the OVF bit is cleared, leading to unknown NMI + * messages. + */ + apic_write(APIC_LVTPC, APIC_DM_NMI); return handled; } diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index 706a9fb46a58..e90f08458e6b 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -391,7 +391,7 @@ static int ioapic_xlate(struct irq_domain *id, const u32 *intspec, u32 intsize, set_io_apic_irq_attr(&attr, idx, line, it->trigger, it->polarity); - return io_apic_setup_irq_pin(*out_hwirq, cpu_to_node(0), &attr); + return io_apic_setup_irq_pin_once(*out_hwirq, cpu_to_node(0), &attr); } static void __init ioapic_add_ofnode(struct device_node *np) diff --git a/arch/x86/platform/ce4100/falconfalls.dts b/arch/x86/platform/ce4100/falconfalls.dts index 2d6d226f2b10..e70be38ce039 100644 --- a/arch/x86/platform/ce4100/falconfalls.dts +++ b/arch/x86/platform/ce4100/falconfalls.dts @@ -347,7 +347,7 @@ "pciclass0c03"; reg = <0x16800 0x0 0x0 0x0 0x0>; - interrupts = <22 3>; + interrupts = <22 1>; }; usb@d,1 { @@ -357,7 +357,7 @@ "pciclass0c03"; reg = <0x16900 0x0 0x0 0x0 0x0>; - interrupts = <22 3>; + interrupts = <22 1>; }; sata@e,0 { @@ -367,7 +367,7 @@ "pciclass0106"; reg = <0x17000 0x0 0x0 0x0 0x0>; - interrupts = <23 3>; + interrupts = <23 1>; }; flash@f,0 { diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index b136c9c1e531..449c556274c0 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -943,6 +943,10 @@ static int acpi_bus_get_flags(struct acpi_device *device) if (ACPI_SUCCESS(status)) device->flags.lockable = 1; + /* Power resources cannot be power manageable. */ + if (device->device_type == ACPI_BUS_TYPE_POWER) + return 0; + /* Presence of _PS0|_PR0 indicates 'power manageable' */ status = acpi_get_handle(device->handle, "_PS0", &temp); if (ACPI_FAILURE(status)) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index fbc5b6e7c591..abe3ab709e87 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -63,6 +63,7 @@ void device_pm_init(struct device *dev) dev->power.wakeup = NULL; spin_lock_init(&dev->power.lock); pm_runtime_init(dev); + INIT_LIST_HEAD(&dev->power.entry); } /** diff --git a/drivers/base/power/wakeup.c b/drivers/base/power/wakeup.c index 4573c83df6dd..abbbd33e8d8a 100644 --- a/drivers/base/power/wakeup.c +++ b/drivers/base/power/wakeup.c @@ -258,7 +258,7 @@ void device_set_wakeup_capable(struct device *dev, bool capable) if (!!dev->power.can_wakeup == !!capable) return; - if (device_is_registered(dev)) { + if (device_is_registered(dev) && !list_empty(&dev->power.entry)) { if (capable) { if (wakeup_sysfs_add(dev)) return; diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index c58f691ec3ce..b493663c7ba7 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -24,6 +24,7 @@ config DRM_KMS_HELPER depends on DRM select FB select FRAMEBUFFER_CONSOLE if !EXPERT + select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE help FB and CRTC helpers for KMS drivers. diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 950720473967..11d7a72c22d9 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -342,9 +342,22 @@ int drm_fb_helper_debug_leave(struct fb_info *info) } EXPORT_SYMBOL(drm_fb_helper_debug_leave); +bool drm_fb_helper_restore_fbdev_mode(struct drm_fb_helper *fb_helper) +{ + bool error = false; + int i, ret; + for (i = 0; i < fb_helper->crtc_count; i++) { + struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set; + ret = drm_crtc_helper_set_config(mode_set); + if (ret) + error = true; + } + return error; +} +EXPORT_SYMBOL(drm_fb_helper_restore_fbdev_mode); + bool drm_fb_helper_force_kernel_mode(void) { - int i = 0; bool ret, error = false; struct drm_fb_helper *helper; @@ -352,12 +365,12 @@ bool drm_fb_helper_force_kernel_mode(void) return false; list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) { - for (i = 0; i < helper->crtc_count; i++) { - struct drm_mode_set *mode_set = &helper->crtc_info[i].mode_set; - ret = drm_crtc_helper_set_config(mode_set); - if (ret) - error = true; - } + if (helper->dev->switch_power_state == DRM_SWITCH_POWER_OFF) + continue; + + ret = drm_fb_helper_restore_fbdev_mode(helper); + if (ret) + error = true; } return error; } diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 72730377a01b..12876f2795d2 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -2207,7 +2207,7 @@ void i915_driver_lastclose(struct drm_device * dev) drm_i915_private_t *dev_priv = dev->dev_private; if (!dev_priv || drm_core_check_feature(dev, DRIVER_MODESET)) { - drm_fb_helper_restore(); + intel_fb_restore_mode(dev); vga_switcheroo_process_delayed_switch(); return; } diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index f5b0d8306d83..1d20712d527f 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -338,4 +338,5 @@ extern int intel_overlay_attrs(struct drm_device *dev, void *data, struct drm_file *file_priv); extern void intel_fb_output_poll_changed(struct drm_device *dev); +extern void intel_fb_restore_mode(struct drm_device *dev); #endif /* __INTEL_DRV_H__ */ diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 512782728e51..ec49bae73382 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -264,3 +264,13 @@ void intel_fb_output_poll_changed(struct drm_device *dev) drm_i915_private_t *dev_priv = dev->dev_private; drm_fb_helper_hotplug_event(&dev_priv->fbdev->helper); } + +void intel_fb_restore_mode(struct drm_device *dev) +{ + int ret; + drm_i915_private_t *dev_priv = dev->dev_private; + + ret = drm_fb_helper_restore_fbdev_mode(&dev_priv->fbdev->helper); + if (ret) + DRM_DEBUG("failed to restore crtc mode\n"); +} diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c index bf7d4c061451..871df0376b1c 100644 --- a/drivers/gpu/drm/radeon/radeon_kms.c +++ b/drivers/gpu/drm/radeon/radeon_kms.c @@ -221,6 +221,19 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) return -EINVAL; } break; + case RADEON_INFO_NUM_TILE_PIPES: + if (rdev->family >= CHIP_CAYMAN) + value = rdev->config.cayman.max_tile_pipes; + else if (rdev->family >= CHIP_CEDAR) + value = rdev->config.evergreen.max_tile_pipes; + else if (rdev->family >= CHIP_RV770) + value = rdev->config.rv770.max_tile_pipes; + else if (rdev->family >= CHIP_R600) + value = rdev->config.r600.max_tile_pipes; + else { + return -EINVAL; + } + break; default: DRM_DEBUG_KMS("Invalid request %d\n", info->request); return -EINVAL; diff --git a/drivers/gpu/drm/radeon/reg_srcs/r600 b/drivers/gpu/drm/radeon/reg_srcs/r600 index af0da4ae3f55..92f1900dc7ca 100644 --- a/drivers/gpu/drm/radeon/reg_srcs/r600 +++ b/drivers/gpu/drm/radeon/reg_srcs/r600 @@ -708,6 +708,7 @@ r600 0x9400 0x00028D0C DB_RENDER_CONTROL 0x00028D10 DB_RENDER_OVERRIDE 0x0002880C DB_SHADER_CONTROL +0x00028D28 DB_SRESULTS_COMPARE_STATE0 0x00028D2C DB_SRESULTS_COMPARE_STATE1 0x00028430 DB_STENCILREFMASK 0x00028434 DB_STENCILREFMASK_BF diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 060ef6327876..50e40dbd8bb6 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -110,8 +110,7 @@ config SENSORS_ADM1021 help If you say yes here you get support for Analog Devices ADM1021 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, - Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10, - and the XEON processor built-in sensor. + Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. This driver can also be built as a module. If so, the module will be called adm1021. @@ -618,10 +617,10 @@ config SENSORS_LM90 depends on I2C help If you say yes here you get support for National Semiconductor LM90, - LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim - MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, - MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton - W83L771W/G/AWG/ASG sensor chips. + LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A, + Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, + MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, + and Winbond/Nuvoton W83L771W/G/AWG/ASG sensor chips. This driver can also be built as a module. If so, the module will be called lm90. diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 250d099ca398..da72dc12068c 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -1094,6 +1094,7 @@ static struct attribute *lm85_attributes_minctl[] = { &sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr, &sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr, &sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr, + NULL }; static const struct attribute_group lm85_group_minctl = { @@ -1104,6 +1105,7 @@ static struct attribute *lm85_attributes_temp_off[] = { &sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr, &sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr, &sensor_dev_attr_temp3_auto_temp_off.dev_attr.attr, + NULL }; static const struct attribute_group lm85_group_temp_off = { @@ -1329,11 +1331,11 @@ static int lm85_probe(struct i2c_client *client, if (data->type != emc6d103s) { err = sysfs_create_group(&client->dev.kobj, &lm85_group_minctl); if (err) - goto err_kfree; + goto err_remove_files; err = sysfs_create_group(&client->dev.kobj, &lm85_group_temp_off); if (err) - goto err_kfree; + goto err_remove_files; } /* The ADT7463/68 have an optional VRM 10 mode where pin 21 is used diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index c43b4e9f96a9..2f94f9504804 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -49,10 +49,10 @@ * chips, but support three temperature sensors instead of two. MAX6695 * and MAX6696 only differ in the pinout so they can be treated identically. * - * This driver also supports the ADT7461 chip from Analog Devices. - * It's supported in both compatibility and extended mode. It is mostly - * compatible with LM90 except for a data format difference for the - * temperature value registers. + * This driver also supports ADT7461 and ADT7461A from Analog Devices as well as + * NCT1008 from ON Semiconductor. The chips are supported in both compatibility + * and extended mode. They are mostly compatible with LM90 except for a data + * format difference for the temperature value registers. * * Since the LM90 was the first chipset supported by this driver, most * comments will refer to this chipset, but are actually general and @@ -88,9 +88,10 @@ * Addresses to scan * Address is fully defined internally and cannot be changed except for * MAX6659, MAX6680 and MAX6681. - * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, MAX6649, MAX6657, - * MAX6658 and W83L771 have address 0x4c. - * ADM1032-2, ADT7461-2, LM89-1, LM99-1 and MAX6646 have address 0x4d. + * LM86, LM89, LM90, LM99, ADM1032, ADM1032-1, ADT7461, ADT7461A, MAX6649, + * MAX6657, MAX6658, NCT1008 and W83L771 have address 0x4c. + * ADM1032-2, ADT7461-2, ADT7461A-2, LM89-1, LM99-1, MAX6646, and NCT1008D + * have address 0x4d. * MAX6647 has address 0x4e. * MAX6659 can have address 0x4c, 0x4d or 0x4e. * MAX6680 and MAX6681 can have address 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, @@ -174,6 +175,7 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, static const struct i2c_device_id lm90_id[] = { { "adm1032", adm1032 }, { "adt7461", adt7461 }, + { "adt7461a", adt7461 }, { "lm90", lm90 }, { "lm86", lm86 }, { "lm89", lm86 }, @@ -188,6 +190,7 @@ static const struct i2c_device_id lm90_id[] = { { "max6681", max6680 }, { "max6695", max6696 }, { "max6696", max6696 }, + { "nct1008", adt7461 }, { "w83l771", w83l771 }, { } }; @@ -1153,6 +1156,11 @@ static int lm90_detect(struct i2c_client *new_client, && (reg_config1 & 0x1B) == 0x00 && reg_convrate <= 0x0A) { name = "adt7461"; + } else + if (chip_id == 0x57 /* ADT7461A, NCT1008 */ + && (reg_config1 & 0x1B) == 0x00 + && reg_convrate <= 0x0A) { + name = "adt7461a"; } } else if (man_id == 0x4D) { /* Maxim */ diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c index de5819199e2e..57240740b161 100644 --- a/drivers/hwmon/twl4030-madc-hwmon.c +++ b/drivers/hwmon/twl4030-madc-hwmon.c @@ -98,7 +98,6 @@ static const struct attribute_group twl4030_madc_group = { static int __devinit twl4030_madc_hwmon_probe(struct platform_device *pdev) { int ret; - int status; struct device *hwmon; ret = sysfs_create_group(&pdev->dev.kobj, &twl4030_madc_group); @@ -107,7 +106,7 @@ static int __devinit twl4030_madc_hwmon_probe(struct platform_device *pdev) hwmon = hwmon_device_register(&pdev->dev); if (IS_ERR(hwmon)) { dev_err(&pdev->dev, "hwmon_device_register failed.\n"); - status = PTR_ERR(hwmon); + ret = PTR_ERR(hwmon); goto err_reg; } diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 72c0415f6f94..455e909bc768 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -134,10 +134,15 @@ SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \ SMBHSTSTS_INTR) +/* Older devices have their ID defined in */ +#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 +#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */ #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72 +#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 +#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 struct i801_priv { struct i2c_adapter adapter; diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 0eb1515541e7..2dbba163b102 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------ * * i2c-parport.c I2C bus over parallel port * * ------------------------------------------------------------------------ * - Copyright (C) 2003-2010 Jean Delvare + Copyright (C) 2003-2011 Jean Delvare Based on older i2c-philips-par.c driver Copyright (C) 1995-2000 Simon G. Vogl @@ -33,6 +33,8 @@ #include #include #include +#include +#include #include "i2c-parport.h" /* ----- Device list ------------------------------------------------------ */ @@ -43,10 +45,11 @@ struct i2c_par { struct i2c_algo_bit_data algo_data; struct i2c_smbus_alert_setup alert_data; struct i2c_client *ara; - struct i2c_par *next; + struct list_head node; }; -static struct i2c_par *adapter_list; +static LIST_HEAD(adapter_list); +static DEFINE_MUTEX(adapter_list_lock); /* ----- Low-level parallel port access ----------------------------------- */ @@ -228,8 +231,9 @@ static void i2c_parport_attach (struct parport *port) } /* Add the new adapter to the list */ - adapter->next = adapter_list; - adapter_list = adapter; + mutex_lock(&adapter_list_lock); + list_add_tail(&adapter->node, &adapter_list); + mutex_unlock(&adapter_list_lock); return; ERROR1: @@ -241,11 +245,11 @@ ERROR0: static void i2c_parport_detach (struct parport *port) { - struct i2c_par *adapter, *prev; + struct i2c_par *adapter, *_n; /* Walk the list */ - for (prev = NULL, adapter = adapter_list; adapter; - prev = adapter, adapter = adapter->next) { + mutex_lock(&adapter_list_lock); + list_for_each_entry_safe(adapter, _n, &adapter_list, node) { if (adapter->pdev->port == port) { if (adapter->ara) { parport_disable_irq(port); @@ -259,14 +263,11 @@ static void i2c_parport_detach (struct parport *port) parport_release(adapter->pdev); parport_unregister_device(adapter->pdev); - if (prev) - prev->next = adapter->next; - else - adapter_list = adapter->next; + list_del(&adapter->node); kfree(adapter); - return; } } + mutex_unlock(&adapter_list_lock); } static struct parport_driver i2c_parport_driver = { diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c index 7de4b7ebffc5..d8ca0a0b970d 100644 --- a/drivers/infiniband/hw/qib/qib_iba6120.c +++ b/drivers/infiniband/hw/qib/qib_iba6120.c @@ -1799,7 +1799,7 @@ static int qib_6120_setup_reset(struct qib_devdata *dd) /* * Keep chip from being accessed until we are ready. Use * writeq() directly, to allow the write even though QIB_PRESENT - * isn't' set. + * isn't set. */ dd->flags &= ~(QIB_INITTED | QIB_PRESENT); dd->int_counter = 0; /* so we check interrupts work again */ diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c index 74fe0360bec7..c765a2eb04cf 100644 --- a/drivers/infiniband/hw/qib/qib_iba7220.c +++ b/drivers/infiniband/hw/qib/qib_iba7220.c @@ -2111,7 +2111,7 @@ static int qib_setup_7220_reset(struct qib_devdata *dd) /* * Keep chip from being accessed until we are ready. Use * writeq() directly, to allow the write even though QIB_PRESENT - * isn't' set. + * isn't set. */ dd->flags &= ~(QIB_INITTED | QIB_PRESENT); dd->int_counter = 0; /* so we check interrupts work again */ diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 55de3cf3441c..6bab3eaea70f 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -3299,7 +3299,7 @@ static int qib_do_7322_reset(struct qib_devdata *dd) /* * Keep chip from being accessed until we are ready. Use * writeq() directly, to allow the write even though QIB_PRESENT - * isn't' set. + * isn't set. */ dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR); dd->flags |= QIB_DOING_RESET; diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c index 5466d47db899..aae40e52af5b 100644 --- a/drivers/media/common/tuners/tda18271-common.c +++ b/drivers/media/common/tuners/tda18271-common.c @@ -533,16 +533,7 @@ int tda18271_calc_main_pll(struct dvb_frontend *fe, u32 freq) if (tda_fail(ret)) goto fail; - regs[R_MPD] = (0x77 & pd); - - switch (priv->mode) { - case TDA18271_ANALOG: - regs[R_MPD] &= ~0x08; - break; - case TDA18271_DIGITAL: - regs[R_MPD] |= 0x08; - break; - } + regs[R_MPD] = (0x7f & pd); div = ((d * (freq / 1000)) << 7) / 125; diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index 9ad4454a148d..d884f5eee73c 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -579,8 +579,8 @@ static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq) #define RF3 2 u32 rf_default[3]; u32 rf_freq[3]; - u8 prog_cal[3]; - u8 prog_tab[3]; + s32 prog_cal[3]; + s32 prog_tab[3]; i = tda18271_lookup_rf_band(fe, &freq, NULL); @@ -602,32 +602,33 @@ static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq) return bcal; tda18271_calc_rf_cal(fe, &rf_freq[rf]); - prog_tab[rf] = regs[R_EB14]; + prog_tab[rf] = (s32)regs[R_EB14]; if (1 == bcal) - prog_cal[rf] = tda18271_calibrate_rf(fe, rf_freq[rf]); + prog_cal[rf] = + (s32)tda18271_calibrate_rf(fe, rf_freq[rf]); else prog_cal[rf] = prog_tab[rf]; switch (rf) { case RF1: map[i].rf_a1 = 0; - map[i].rf_b1 = (s32)(prog_cal[RF1] - prog_tab[RF1]); + map[i].rf_b1 = (prog_cal[RF1] - prog_tab[RF1]); map[i].rf1 = rf_freq[RF1] / 1000; break; case RF2: - dividend = (s32)(prog_cal[RF2] - prog_tab[RF2]) - - (s32)(prog_cal[RF1] + prog_tab[RF1]); + dividend = (prog_cal[RF2] - prog_tab[RF2] - + prog_cal[RF1] + prog_tab[RF1]); divisor = (s32)(rf_freq[RF2] - rf_freq[RF1]) / 1000; map[i].rf_a1 = (dividend / divisor); map[i].rf2 = rf_freq[RF2] / 1000; break; case RF3: - dividend = (s32)(prog_cal[RF3] - prog_tab[RF3]) - - (s32)(prog_cal[RF2] + prog_tab[RF2]); + dividend = (prog_cal[RF3] - prog_tab[RF3] - + prog_cal[RF2] + prog_tab[RF2]); divisor = (s32)(rf_freq[RF3] - rf_freq[RF2]) / 1000; map[i].rf_a2 = (dividend / divisor); - map[i].rf_b2 = (s32)(prog_cal[RF2] - prog_tab[RF2]); + map[i].rf_b2 = (prog_cal[RF2] - prog_tab[RF2]); map[i].rf3 = rf_freq[RF3] / 1000; break; default: diff --git a/drivers/media/common/tuners/tda18271-maps.c b/drivers/media/common/tuners/tda18271-maps.c index e7f84c705da8..3d5b6ab7e332 100644 --- a/drivers/media/common/tuners/tda18271-maps.c +++ b/drivers/media/common/tuners/tda18271-maps.c @@ -229,8 +229,7 @@ static struct tda18271_map tda18271c2_km[] = { static struct tda18271_map tda18271_rf_band[] = { { .rfmax = 47900, .val = 0x00 }, { .rfmax = 61100, .val = 0x01 }, -/* { .rfmax = 152600, .val = 0x02 }, */ - { .rfmax = 121200, .val = 0x02 }, + { .rfmax = 152600, .val = 0x02 }, { .rfmax = 164700, .val = 0x03 }, { .rfmax = 203500, .val = 0x04 }, { .rfmax = 457800, .val = 0x05 }, @@ -448,7 +447,7 @@ static struct tda18271_map tda18271c2_rf_cal[] = { { .rfmax = 150000, .val = 0xb0 }, { .rfmax = 151000, .val = 0xb1 }, { .rfmax = 152000, .val = 0xb7 }, - { .rfmax = 153000, .val = 0xbd }, + { .rfmax = 152600, .val = 0xbd }, { .rfmax = 154000, .val = 0x20 }, { .rfmax = 155000, .val = 0x22 }, { .rfmax = 156000, .val = 0x24 }, @@ -459,7 +458,7 @@ static struct tda18271_map tda18271c2_rf_cal[] = { { .rfmax = 161000, .val = 0x2d }, { .rfmax = 163000, .val = 0x2e }, { .rfmax = 164000, .val = 0x2f }, - { .rfmax = 165000, .val = 0x30 }, + { .rfmax = 164700, .val = 0x30 }, { .rfmax = 166000, .val = 0x11 }, { .rfmax = 167000, .val = 0x12 }, { .rfmax = 168000, .val = 0x13 }, @@ -510,7 +509,8 @@ static struct tda18271_map tda18271c2_rf_cal[] = { { .rfmax = 236000, .val = 0x1b }, { .rfmax = 237000, .val = 0x1c }, { .rfmax = 240000, .val = 0x1d }, - { .rfmax = 242000, .val = 0x1f }, + { .rfmax = 242000, .val = 0x1e }, + { .rfmax = 244000, .val = 0x1f }, { .rfmax = 247000, .val = 0x20 }, { .rfmax = 249000, .val = 0x21 }, { .rfmax = 252000, .val = 0x22 }, @@ -624,7 +624,7 @@ static struct tda18271_map tda18271c2_rf_cal[] = { { .rfmax = 453000, .val = 0x93 }, { .rfmax = 454000, .val = 0x94 }, { .rfmax = 456000, .val = 0x96 }, - { .rfmax = 457000, .val = 0x98 }, + { .rfmax = 457800, .val = 0x98 }, { .rfmax = 461000, .val = 0x11 }, { .rfmax = 468000, .val = 0x12 }, { .rfmax = 472000, .val = 0x13 }, diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c index 955254090a0e..03f96d6ca894 100644 --- a/drivers/media/dvb/b2c2/flexcop-pci.c +++ b/drivers/media/dvb/b2c2/flexcop-pci.c @@ -38,7 +38,7 @@ MODULE_PARM_DESC(debug, DEBSTATUS); #define DRIVER_VERSION "0.1" -#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver" +#define DRIVER_NAME "flexcop-pci" #define DRIVER_AUTHOR "Patrick Boettcher " struct flexcop_pci { diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index fe4f894183ff..ccbd39a38c46 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -362,7 +362,7 @@ config DVB_USB_LME2510 config DVB_USB_TECHNISAT_USB2 tristate "Technisat DVB-S/S2 USB2.0 support" depends on DVB_USB - select DVB_STB0899 if !DVB_FE_CUSTOMISE - select DVB_STB6100 if !DVB_FE_CUSTOMISE + select DVB_STV090x if !DVB_FE_CUSTOMISE + select DVB_STV6110x if !DVB_FE_CUSTOMISE help Say Y here to support the Technisat USB2 DVB-S/S2 device diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 97af266d7f1d..65214af5cd74 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -2162,7 +2162,7 @@ struct dibx000_agc_config dib7090_agc_config[2] = { .agc1_pt3 = 98, .agc1_slope1 = 0, .agc1_slope2 = 167, - .agc1_pt1 = 98, + .agc2_pt1 = 98, .agc2_pt2 = 255, .agc2_slope1 = 104, .agc2_slope2 = 0, @@ -2440,11 +2440,11 @@ static int tfe7090pvr_frontend0_attach(struct dvb_usb_adapter *adap) dib0700_set_i2c_speed(adap->dev, 340); adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]); - dib7090_slave_reset(adap->fe); - if (adap->fe == NULL) return -ENODEV; + dib7090_slave_reset(adap->fe); + return 0; } diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c index 23640ed44d85..056138f63c7d 100644 --- a/drivers/media/media-entity.c +++ b/drivers/media/media-entity.c @@ -378,7 +378,6 @@ EXPORT_SYMBOL_GPL(media_entity_create_link); static int __media_entity_setup_link_notify(struct media_link *link, u32 flags) { - const u32 mask = MEDIA_LNK_FL_ENABLED; int ret; /* Notify both entities. */ @@ -395,7 +394,7 @@ static int __media_entity_setup_link_notify(struct media_link *link, u32 flags) return ret; } - link->flags = (link->flags & ~mask) | (flags & mask); + link->flags = flags; link->reverse->flags = link->flags; return 0; @@ -417,6 +416,7 @@ static int __media_entity_setup_link_notify(struct media_link *link, u32 flags) */ int __media_entity_setup_link(struct media_link *link, u32 flags) { + const u32 mask = MEDIA_LNK_FL_ENABLED; struct media_device *mdev; struct media_entity *source, *sink; int ret = -EBUSY; @@ -424,6 +424,10 @@ int __media_entity_setup_link(struct media_link *link, u32 flags) if (link == NULL) return -EINVAL; + /* The non-modifiable link flags must not be modified. */ + if ((link->flags & ~mask) != (flags & ~mask)) + return -EINVAL; + if (link->flags & MEDIA_LNK_FL_IMMUTABLE) return link->flags == flags ? 0 : -EINVAL; diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index dc3f04c52d5e..87bad7678d92 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -170,7 +170,7 @@ static int fmr2_setfreq(struct fmr2 *dev) return 0; } -/* !!! not tested, in my card this does't work !!! */ +/* !!! not tested, in my card this doesn't work !!! */ static int fmr2_setvolume(struct fmr2 *dev) { int vol[16] = { 0x021, 0x084, 0x090, 0x104, diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 4498b944dec8..00f51dd121f3 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -875,7 +875,7 @@ config MX3_VIDEO config VIDEO_MX3 tristate "i.MX3x Camera Sensor Interface driver" depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA - select VIDEOBUF_DMA_CONTIG + select VIDEOBUF2_DMA_CONTIG select MX3_VIDEO ---help--- This is a v4l2 driver for the i.MX3x Camera Sensor Interface diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index c6e2ca3b1149..6fbc356113c1 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -350,9 +350,17 @@ void cx18_streams_cleanup(struct cx18 *cx, int unregister) /* No struct video_device, but can have buffers allocated */ if (type == CX18_ENC_STREAM_TYPE_IDX) { + /* If the module params didn't inhibit IDX ... */ if (cx->stream_buffers[type] != 0) { cx->stream_buffers[type] = 0; - cx18_stream_free(&cx->streams[type]); + /* + * Before calling cx18_stream_free(), + * check if the IDX stream was actually set up. + * Needed, since the cx18_probe() error path + * exits through here as well as normal clean up + */ + if (cx->streams[type].buffers != 0) + cx18_stream_free(&cx->streams[type]); } continue; } diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig index 3b6e7f28568e..caab1bfb79e2 100644 --- a/drivers/media/video/cx23885/Kconfig +++ b/drivers/media/video/cx23885/Kconfig @@ -22,6 +22,7 @@ config VIDEO_CX23885 select DVB_CX24116 if !DVB_FE_CUSTOMISE select DVB_STV0900 if !DVB_FE_CUSTOMISE select DVB_DS3000 if !DVB_FE_CUSTOMISE + select DVB_STV0367 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE diff --git a/drivers/media/video/imx074.c b/drivers/media/video/imx074.c index 1a1169115716..0382ea752e6f 100644 --- a/drivers/media/video/imx074.c +++ b/drivers/media/video/imx074.c @@ -298,7 +298,7 @@ static unsigned long imx074_query_bus_param(struct soc_camera_device *icd) static int imx074_set_bus_param(struct soc_camera_device *icd, unsigned long flags) { - return -1; + return -EINVAL; } static struct soc_camera_ops imx074_ops = { diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c index 503bd7922bd6..472a69359e60 100644 --- a/drivers/media/video/omap3isp/isp.c +++ b/drivers/media/video/omap3isp/isp.c @@ -215,20 +215,21 @@ static u32 isp_set_xclk(struct isp_device *isp, u32 xclk, u8 xclksel) } switch (xclksel) { - case 0: + case ISP_XCLK_A: isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, ISPTCTRL_CTRL_DIVA_MASK, divisor << ISPTCTRL_CTRL_DIVA_SHIFT); dev_dbg(isp->dev, "isp_set_xclk(): cam_xclka set to %d Hz\n", currentxclk); break; - case 1: + case ISP_XCLK_B: isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, ISPTCTRL_CTRL_DIVB_MASK, divisor << ISPTCTRL_CTRL_DIVB_SHIFT); dev_dbg(isp->dev, "isp_set_xclk(): cam_xclkb set to %d Hz\n", currentxclk); break; + case ISP_XCLK_NONE: default: omap3isp_put(isp); dev_dbg(isp->dev, "ISP_ERR: isp_set_xclk(): Invalid requested " @@ -237,13 +238,13 @@ static u32 isp_set_xclk(struct isp_device *isp, u32 xclk, u8 xclksel) } /* Do we go from stable whatever to clock? */ - if (divisor >= 2 && isp->xclk_divisor[xclksel] < 2) + if (divisor >= 2 && isp->xclk_divisor[xclksel - 1] < 2) omap3isp_get(isp); /* Stopping the clock. */ - else if (divisor < 2 && isp->xclk_divisor[xclksel] >= 2) + else if (divisor < 2 && isp->xclk_divisor[xclksel - 1] >= 2) omap3isp_put(isp); - isp->xclk_divisor[xclksel] = divisor; + isp->xclk_divisor[xclksel - 1] = divisor; omap3isp_put(isp); @@ -285,7 +286,8 @@ static void isp_power_settings(struct isp_device *isp, int idle) */ void omap3isp_configure_bridge(struct isp_device *isp, enum ccdc_input_entity input, - const struct isp_parallel_platform_data *pdata) + const struct isp_parallel_platform_data *pdata, + unsigned int shift) { u32 ispctrl_val; @@ -298,9 +300,9 @@ void omap3isp_configure_bridge(struct isp_device *isp, switch (input) { case CCDC_INPUT_PARALLEL: ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_PARALLEL; - ispctrl_val |= pdata->data_lane_shift << ISPCTRL_SHIFT_SHIFT; ispctrl_val |= pdata->clk_pol << ISPCTRL_PAR_CLK_POL_SHIFT; ispctrl_val |= pdata->bridge << ISPCTRL_PAR_BRIDGE_SHIFT; + shift += pdata->data_lane_shift * 2; break; case CCDC_INPUT_CSI2A: @@ -319,6 +321,8 @@ void omap3isp_configure_bridge(struct isp_device *isp, return; } + ispctrl_val |= ((shift/2) << ISPCTRL_SHIFT_SHIFT) & ISPCTRL_SHIFT_MASK; + ispctrl_val &= ~ISPCTRL_SYNC_DETECT_MASK; ispctrl_val |= ISPCTRL_SYNC_DETECT_VSRISE; @@ -658,6 +662,8 @@ int omap3isp_pipeline_pm_use(struct media_entity *entity, int use) /* Apply power change to connected non-nodes. */ ret = isp_pipeline_pm_power(entity, change); + if (ret < 0) + entity->use_count -= change; mutex_unlock(&entity->parent->graph_mutex); @@ -872,6 +878,9 @@ static int isp_pipeline_disable(struct isp_pipeline *pipe) } } + if (failure < 0) + isp->needs_reset = true; + return failure; } @@ -884,7 +893,8 @@ static int isp_pipeline_disable(struct isp_pipeline *pipe) * single-shot or continuous mode. * * Return 0 if successful, or the return value of the failed video::s_stream - * operation otherwise. + * operation otherwise. The pipeline state is not updated when the operation + * fails, except when stopping the pipeline. */ int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe, enum isp_pipeline_stream_state state) @@ -895,7 +905,9 @@ int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe, ret = isp_pipeline_disable(pipe); else ret = isp_pipeline_enable(pipe, state); - pipe->stream_state = state; + + if (ret == 0 || state == ISP_PIPELINE_STREAM_STOPPED) + pipe->stream_state = state; return ret; } @@ -1481,6 +1493,10 @@ void omap3isp_put(struct isp_device *isp) if (--isp->ref_count == 0) { isp_disable_interrupts(isp); isp_save_ctx(isp); + if (isp->needs_reset) { + isp_reset(isp); + isp->needs_reset = false; + } isp_disable_clocks(isp); } mutex_unlock(&isp->isp_mutex); diff --git a/drivers/media/video/omap3isp/isp.h b/drivers/media/video/omap3isp/isp.h index cf5214e95a92..2620c405f5e4 100644 --- a/drivers/media/video/omap3isp/isp.h +++ b/drivers/media/video/omap3isp/isp.h @@ -132,7 +132,6 @@ struct isp_reg { /** * struct isp_parallel_platform_data - Parallel interface platform data - * @width: Parallel bus width in bits (8, 10, 11 or 12) * @data_lane_shift: Data lane shifter * 0 - CAMEXT[13:0] -> CAM[13:0] * 1 - CAMEXT[13:2] -> CAM[11:0] @@ -146,7 +145,6 @@ struct isp_reg { * ISPCTRL_PAR_BRIDGE_BENDIAN - Big endian */ struct isp_parallel_platform_data { - unsigned int width; unsigned int data_lane_shift:2; unsigned int clk_pol:1; unsigned int bridge:4; @@ -262,6 +260,7 @@ struct isp_device { /* ISP Obj */ spinlock_t stat_lock; /* common lock for statistic drivers */ struct mutex isp_mutex; /* For handling ref_count field */ + bool needs_reset; int has_context; int ref_count; unsigned int autoidle; @@ -311,11 +310,12 @@ int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe, enum isp_pipeline_stream_state state); void omap3isp_configure_bridge(struct isp_device *isp, enum ccdc_input_entity input, - const struct isp_parallel_platform_data *pdata); + const struct isp_parallel_platform_data *pdata, + unsigned int shift); -#define ISP_XCLK_NONE -1 -#define ISP_XCLK_A 0 -#define ISP_XCLK_B 1 +#define ISP_XCLK_NONE 0 +#define ISP_XCLK_A 1 +#define ISP_XCLK_B 2 struct isp_device *omap3isp_get(struct isp_device *isp); void omap3isp_put(struct isp_device *isp); diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c index 5ff9d14ce710..39d501bda636 100644 --- a/drivers/media/video/omap3isp/ispccdc.c +++ b/drivers/media/video/omap3isp/ispccdc.c @@ -43,6 +43,12 @@ __ccdc_get_format(struct isp_ccdc_device *ccdc, struct v4l2_subdev_fh *fh, static const unsigned int ccdc_fmts[] = { V4L2_MBUS_FMT_Y8_1X8, + V4L2_MBUS_FMT_Y10_1X10, + V4L2_MBUS_FMT_Y12_1X12, + V4L2_MBUS_FMT_SGRBG8_1X8, + V4L2_MBUS_FMT_SRGGB8_1X8, + V4L2_MBUS_FMT_SBGGR8_1X8, + V4L2_MBUS_FMT_SGBRG8_1X8, V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SBGGR10_1X10, @@ -1110,21 +1116,38 @@ static void ccdc_configure(struct isp_ccdc_device *ccdc) struct isp_parallel_platform_data *pdata = NULL; struct v4l2_subdev *sensor; struct v4l2_mbus_framefmt *format; + const struct isp_format_info *fmt_info; + struct v4l2_subdev_format fmt_src; + unsigned int depth_out; + unsigned int depth_in = 0; struct media_pad *pad; unsigned long flags; + unsigned int shift; u32 syn_mode; u32 ccdc_pattern; - if (ccdc->input == CCDC_INPUT_PARALLEL) { - pad = media_entity_remote_source(&ccdc->pads[CCDC_PAD_SINK]); - sensor = media_entity_to_v4l2_subdev(pad->entity); + pad = media_entity_remote_source(&ccdc->pads[CCDC_PAD_SINK]); + sensor = media_entity_to_v4l2_subdev(pad->entity); + if (ccdc->input == CCDC_INPUT_PARALLEL) pdata = &((struct isp_v4l2_subdevs_group *)sensor->host_priv) ->bus.parallel; + + /* Compute shift value for lane shifter to configure the bridge. */ + fmt_src.pad = pad->index; + fmt_src.which = V4L2_SUBDEV_FORMAT_ACTIVE; + if (!v4l2_subdev_call(sensor, pad, get_fmt, NULL, &fmt_src)) { + fmt_info = omap3isp_video_format_info(fmt_src.format.code); + depth_in = fmt_info->bpp; } - omap3isp_configure_bridge(isp, ccdc->input, pdata); + fmt_info = omap3isp_video_format_info + (isp->isp_ccdc.formats[CCDC_PAD_SINK].code); + depth_out = fmt_info->bpp; - ccdc->syncif.datsz = pdata ? pdata->width : 10; + shift = depth_in - depth_out; + omap3isp_configure_bridge(isp, ccdc->input, pdata, shift); + + ccdc->syncif.datsz = depth_out; ccdc_config_sync_if(ccdc, &ccdc->syncif); /* CCDC_PAD_SINK */ @@ -1338,7 +1361,7 @@ static int ccdc_sbl_wait_idle(struct isp_ccdc_device *ccdc, * @ccdc: Pointer to ISP CCDC device. * @event: Pointing which event trigger handler * - * Return 1 when the event and stopping request combination is satisfyied, + * Return 1 when the event and stopping request combination is satisfied, * zero otherwise. */ static int __ccdc_handle_stopping(struct isp_ccdc_device *ccdc, u32 event) @@ -1618,7 +1641,7 @@ static int ccdc_video_queue(struct isp_video *video, struct isp_buffer *buffer) ccdc_set_outaddr(ccdc, buffer->isp_addr); - /* We now have a buffer queued on the output, restart the pipeline in + /* We now have a buffer queued on the output, restart the pipeline * on the next CCDC interrupt if running in continuous mode (or when * starting the stream). */ diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c index 2b16988a501d..aba537af87e4 100644 --- a/drivers/media/video/omap3isp/isppreview.c +++ b/drivers/media/video/omap3isp/isppreview.c @@ -755,7 +755,7 @@ static struct preview_update update_attrs[] = { * @configs - pointer to update config structure. * @config - return pointer to appropriate structure field. * @bit - for which feature to return pointers. - * Return size of coresponding prev_params member + * Return size of corresponding prev_params member */ static u32 __preview_get_ptrs(struct prev_params *params, void **param, diff --git a/drivers/media/video/omap3isp/ispqueue.c b/drivers/media/video/omap3isp/ispqueue.c index 8fddc5806b0d..9c317148205f 100644 --- a/drivers/media/video/omap3isp/ispqueue.c +++ b/drivers/media/video/omap3isp/ispqueue.c @@ -339,7 +339,7 @@ static int isp_video_buffer_prepare_user(struct isp_video_buffer *buf) up_read(¤t->mm->mmap_sem); if (ret != buf->npages) { - buf->npages = ret; + buf->npages = ret < 0 ? 0 : ret; isp_video_buffer_cleanup(buf); return -EFAULT; } @@ -408,8 +408,8 @@ done: * isp_video_buffer_prepare_vm_flags - Get VMA flags for a userspace address * * This function locates the VMAs for the buffer's userspace address and checks - * that their flags match. The onlflag that we need to care for at the moment is - * VM_PFNMAP. + * that their flags match. The only flag that we need to care for at the moment + * is VM_PFNMAP. * * The buffer vm_flags field is set to the first VMA flags. * diff --git a/drivers/media/video/omap3isp/ispresizer.c b/drivers/media/video/omap3isp/ispresizer.c index 653f88ba56db..0bb0f8cd36f5 100644 --- a/drivers/media/video/omap3isp/ispresizer.c +++ b/drivers/media/video/omap3isp/ispresizer.c @@ -714,19 +714,50 @@ static void resizer_print_status(struct isp_res_device *res) * iw and ih are the input width and height after cropping. Those equations need * to be satisfied exactly for the resizer to work correctly. * - * Reverting the equations, we can compute the resizing ratios with + * The equations can't be easily reverted, as the >> 8 operation is not linear. + * In addition, not all input sizes can be achieved for a given output size. To + * get the highest input size lower than or equal to the requested input size, + * we need to compute the highest resizing ratio that satisfies the following + * inequality (taking the 4-tap mode width equation as an example) + * + * iw >= (32 * sph + (ow - 1) * hrsz + 16) >> 8 - 7 + * + * (where iw is the requested input width) which can be rewritten as + * + * iw - 7 >= (32 * sph + (ow - 1) * hrsz + 16) >> 8 + * (iw - 7) << 8 >= 32 * sph + (ow - 1) * hrsz + 16 - b + * ((iw - 7) << 8) + b >= 32 * sph + (ow - 1) * hrsz + 16 + * + * where b is the value of the 8 least significant bits of the right hand side + * expression of the last inequality. The highest resizing ratio value will be + * achieved when b is equal to its maximum value of 255. That resizing ratio + * value will still satisfy the original inequality, as b will disappear when + * the expression will be shifted right by 8. + * + * The reverted the equations thus become * * - 8-phase, 4-tap mode - * hrsz = ((iw - 7) * 256 - 16 - 32 * sph) / (ow - 1) - * vrsz = ((ih - 4) * 256 - 16 - 32 * spv) / (oh - 1) + * hrsz = ((iw - 7) * 256 + 255 - 16 - 32 * sph) / (ow - 1) + * vrsz = ((ih - 4) * 256 + 255 - 16 - 32 * spv) / (oh - 1) * - 4-phase, 7-tap mode - * hrsz = ((iw - 7) * 256 - 32 - 64 * sph) / (ow - 1) - * vrsz = ((ih - 7) * 256 - 32 - 64 * spv) / (oh - 1) + * hrsz = ((iw - 7) * 256 + 255 - 32 - 64 * sph) / (ow - 1) + * vrsz = ((ih - 7) * 256 + 255 - 32 - 64 * spv) / (oh - 1) * - * The ratios are integer values, and must be rounded down to ensure that the - * cropped input size is not bigger than the uncropped input size. As the ratio - * in 7-tap mode is always smaller than the ratio in 4-tap mode, we can use the - * 7-tap mode equations to compute a ratio approximation. + * The ratios are integer values, and are rounded down to ensure that the + * cropped input size is not bigger than the uncropped input size. + * + * As the number of phases/taps, used to select the correct equations to compute + * the ratio, depends on the ratio, we start with the 4-tap mode equations to + * compute an approximation of the ratio, and switch to the 7-tap mode equations + * if the approximation is higher than the ratio threshold. + * + * As the 7-tap mode equations will return a ratio smaller than or equal to the + * 4-tap mode equations, the resulting ratio could become lower than or equal to + * the ratio threshold. This 'equations loop' isn't an issue as long as the + * correct equations are used to compute the final input size. Starting with the + * 4-tap mode equations ensure that, in case of values resulting in a 'ratio + * loop', the smallest of the ratio values will be used, never exceeding the + * requested input size. * * We first clamp the output size according to the hardware capabilitie to avoid * auto-cropping the input more than required to satisfy the TRM equations. The @@ -775,6 +806,8 @@ static void resizer_calc_ratios(struct isp_res_device *res, unsigned int max_width; unsigned int max_height; unsigned int width_alignment; + unsigned int width; + unsigned int height; /* * Clamp the output height based on the hardware capabilities and @@ -786,19 +819,22 @@ static void resizer_calc_ratios(struct isp_res_device *res, max_height = min_t(unsigned int, max_height, MAX_OUT_HEIGHT); output->height = clamp(output->height, min_height, max_height); - ratio->vert = ((input->height - 7) * 256 - 32 - 64 * spv) + ratio->vert = ((input->height - 4) * 256 + 255 - 16 - 32 * spv) / (output->height - 1); + if (ratio->vert > MID_RESIZE_VALUE) + ratio->vert = ((input->height - 7) * 256 + 255 - 32 - 64 * spv) + / (output->height - 1); ratio->vert = clamp_t(unsigned int, ratio->vert, MIN_RESIZE_VALUE, MAX_RESIZE_VALUE); if (ratio->vert <= MID_RESIZE_VALUE) { upscaled_height = (output->height - 1) * ratio->vert + 32 * spv + 16; - input->height = (upscaled_height >> 8) + 4; + height = (upscaled_height >> 8) + 4; } else { upscaled_height = (output->height - 1) * ratio->vert + 64 * spv + 32; - input->height = (upscaled_height >> 8) + 7; + height = (upscaled_height >> 8) + 7; } /* @@ -854,20 +890,29 @@ static void resizer_calc_ratios(struct isp_res_device *res, max_width & ~(width_alignment - 1)); output->width = ALIGN(output->width, width_alignment); - ratio->horz = ((input->width - 7) * 256 - 32 - 64 * sph) + ratio->horz = ((input->width - 7) * 256 + 255 - 16 - 32 * sph) / (output->width - 1); + if (ratio->horz > MID_RESIZE_VALUE) + ratio->horz = ((input->width - 7) * 256 + 255 - 32 - 64 * sph) + / (output->width - 1); ratio->horz = clamp_t(unsigned int, ratio->horz, MIN_RESIZE_VALUE, MAX_RESIZE_VALUE); if (ratio->horz <= MID_RESIZE_VALUE) { upscaled_width = (output->width - 1) * ratio->horz + 32 * sph + 16; - input->width = (upscaled_width >> 8) + 7; + width = (upscaled_width >> 8) + 7; } else { upscaled_width = (output->width - 1) * ratio->horz + 64 * sph + 32; - input->width = (upscaled_width >> 8) + 7; + width = (upscaled_width >> 8) + 7; } + + /* Center the new crop rectangle. */ + input->left += (input->width - width) / 2; + input->top += (input->height - height) / 2; + input->width = width; + input->height = height; } /* diff --git a/drivers/media/video/omap3isp/ispstat.h b/drivers/media/video/omap3isp/ispstat.h index 820950c9ef46..d86da94fa50d 100644 --- a/drivers/media/video/omap3isp/ispstat.h +++ b/drivers/media/video/omap3isp/ispstat.h @@ -131,9 +131,9 @@ struct ispstat { struct ispstat_generic_config { /* * Fields must be in the same order as in: - * - isph3a_aewb_config - * - isph3a_af_config - * - isphist_config + * - omap3isp_h3a_aewb_config + * - omap3isp_h3a_af_config + * - omap3isp_hist_config */ u32 buf_size; u16 config_counter; diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c index 208a7ec739d7..9cd8f1aa567b 100644 --- a/drivers/media/video/omap3isp/ispvideo.c +++ b/drivers/media/video/omap3isp/ispvideo.c @@ -47,29 +47,59 @@ static struct isp_format_info formats[] = { { V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8, - V4L2_MBUS_FMT_Y8_1X8, V4L2_PIX_FMT_GREY, 8, }, + V4L2_MBUS_FMT_Y8_1X8, V4L2_MBUS_FMT_Y8_1X8, + V4L2_PIX_FMT_GREY, 8, }, + { V4L2_MBUS_FMT_Y10_1X10, V4L2_MBUS_FMT_Y10_1X10, + V4L2_MBUS_FMT_Y10_1X10, V4L2_MBUS_FMT_Y8_1X8, + V4L2_PIX_FMT_Y10, 10, }, + { V4L2_MBUS_FMT_Y12_1X12, V4L2_MBUS_FMT_Y10_1X10, + V4L2_MBUS_FMT_Y12_1X12, V4L2_MBUS_FMT_Y8_1X8, + V4L2_PIX_FMT_Y12, 12, }, + { V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_MBUS_FMT_SBGGR8_1X8, + V4L2_MBUS_FMT_SBGGR8_1X8, V4L2_MBUS_FMT_SBGGR8_1X8, + V4L2_PIX_FMT_SBGGR8, 8, }, + { V4L2_MBUS_FMT_SGBRG8_1X8, V4L2_MBUS_FMT_SGBRG8_1X8, + V4L2_MBUS_FMT_SGBRG8_1X8, V4L2_MBUS_FMT_SGBRG8_1X8, + V4L2_PIX_FMT_SGBRG8, 8, }, + { V4L2_MBUS_FMT_SGRBG8_1X8, V4L2_MBUS_FMT_SGRBG8_1X8, + V4L2_MBUS_FMT_SGRBG8_1X8, V4L2_MBUS_FMT_SGRBG8_1X8, + V4L2_PIX_FMT_SGRBG8, 8, }, + { V4L2_MBUS_FMT_SRGGB8_1X8, V4L2_MBUS_FMT_SRGGB8_1X8, + V4L2_MBUS_FMT_SRGGB8_1X8, V4L2_MBUS_FMT_SRGGB8_1X8, + V4L2_PIX_FMT_SRGGB8, 8, }, { V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, - V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10DPCM8, 8, }, + V4L2_MBUS_FMT_SGRBG10_1X10, 0, + V4L2_PIX_FMT_SGRBG10DPCM8, 8, }, { V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR10_1X10, - V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_SBGGR10, 10, }, + V4L2_MBUS_FMT_SBGGR10_1X10, V4L2_MBUS_FMT_SBGGR8_1X8, + V4L2_PIX_FMT_SBGGR10, 10, }, { V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG10_1X10, - V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_SGBRG10, 10, }, + V4L2_MBUS_FMT_SGBRG10_1X10, V4L2_MBUS_FMT_SGBRG8_1X8, + V4L2_PIX_FMT_SGBRG10, 10, }, { V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SGRBG10_1X10, - V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10, 10, }, + V4L2_MBUS_FMT_SGRBG10_1X10, V4L2_MBUS_FMT_SGRBG8_1X8, + V4L2_PIX_FMT_SGRBG10, 10, }, { V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SRGGB10_1X10, - V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_SRGGB10, 10, }, + V4L2_MBUS_FMT_SRGGB10_1X10, V4L2_MBUS_FMT_SRGGB8_1X8, + V4L2_PIX_FMT_SRGGB10, 10, }, { V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_MBUS_FMT_SBGGR10_1X10, - V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_PIX_FMT_SBGGR12, 12, }, + V4L2_MBUS_FMT_SBGGR12_1X12, V4L2_MBUS_FMT_SBGGR8_1X8, + V4L2_PIX_FMT_SBGGR12, 12, }, { V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_MBUS_FMT_SGBRG10_1X10, - V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_PIX_FMT_SGBRG12, 12, }, + V4L2_MBUS_FMT_SGBRG12_1X12, V4L2_MBUS_FMT_SGBRG8_1X8, + V4L2_PIX_FMT_SGBRG12, 12, }, { V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_MBUS_FMT_SGRBG10_1X10, - V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_PIX_FMT_SGRBG12, 12, }, + V4L2_MBUS_FMT_SGRBG12_1X12, V4L2_MBUS_FMT_SGRBG8_1X8, + V4L2_PIX_FMT_SGRBG12, 12, }, { V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_MBUS_FMT_SRGGB10_1X10, - V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_PIX_FMT_SRGGB12, 12, }, + V4L2_MBUS_FMT_SRGGB12_1X12, V4L2_MBUS_FMT_SRGGB8_1X8, + V4L2_PIX_FMT_SRGGB12, 12, }, { V4L2_MBUS_FMT_UYVY8_1X16, V4L2_MBUS_FMT_UYVY8_1X16, - V4L2_MBUS_FMT_UYVY8_1X16, V4L2_PIX_FMT_UYVY, 16, }, + V4L2_MBUS_FMT_UYVY8_1X16, 0, + V4L2_PIX_FMT_UYVY, 16, }, { V4L2_MBUS_FMT_YUYV8_1X16, V4L2_MBUS_FMT_YUYV8_1X16, - V4L2_MBUS_FMT_YUYV8_1X16, V4L2_PIX_FMT_YUYV, 16, }, + V4L2_MBUS_FMT_YUYV8_1X16, 0, + V4L2_PIX_FMT_YUYV, 16, }, }; const struct isp_format_info * @@ -85,6 +115,37 @@ omap3isp_video_format_info(enum v4l2_mbus_pixelcode code) return NULL; } +/* + * Decide whether desired output pixel code can be obtained with + * the lane shifter by shifting the input pixel code. + * @in: input pixelcode to shifter + * @out: output pixelcode from shifter + * @additional_shift: # of bits the sensor's LSB is offset from CAMEXT[0] + * + * return true if the combination is possible + * return false otherwise + */ +static bool isp_video_is_shiftable(enum v4l2_mbus_pixelcode in, + enum v4l2_mbus_pixelcode out, + unsigned int additional_shift) +{ + const struct isp_format_info *in_info, *out_info; + + if (in == out) + return true; + + in_info = omap3isp_video_format_info(in); + out_info = omap3isp_video_format_info(out); + + if ((in_info->flavor == 0) || (out_info->flavor == 0)) + return false; + + if (in_info->flavor != out_info->flavor) + return false; + + return in_info->bpp - out_info->bpp + additional_shift <= 6; +} + /* * isp_video_mbus_to_pix - Convert v4l2_mbus_framefmt to v4l2_pix_format * @video: ISP video instance @@ -235,6 +296,7 @@ static int isp_video_validate_pipeline(struct isp_pipeline *pipe) return -EPIPE; while (1) { + unsigned int shifter_link; /* Retrieve the sink format */ pad = &subdev->entity.pads[0]; if (!(pad->flags & MEDIA_PAD_FL_SINK)) @@ -263,6 +325,10 @@ static int isp_video_validate_pipeline(struct isp_pipeline *pipe) return -ENOSPC; } + /* If sink pad is on CCDC, the link has the lane shifter + * in the middle of it. */ + shifter_link = subdev == &isp->isp_ccdc.subdev; + /* Retrieve the source format */ pad = media_entity_remote_source(pad); if (pad == NULL || @@ -278,10 +344,24 @@ static int isp_video_validate_pipeline(struct isp_pipeline *pipe) return -EPIPE; /* Check if the two ends match */ - if (fmt_source.format.code != fmt_sink.format.code || - fmt_source.format.width != fmt_sink.format.width || + if (fmt_source.format.width != fmt_sink.format.width || fmt_source.format.height != fmt_sink.format.height) return -EPIPE; + + if (shifter_link) { + unsigned int parallel_shift = 0; + if (isp->isp_ccdc.input == CCDC_INPUT_PARALLEL) { + struct isp_parallel_platform_data *pdata = + &((struct isp_v4l2_subdevs_group *) + subdev->host_priv)->bus.parallel; + parallel_shift = pdata->data_lane_shift * 2; + } + if (!isp_video_is_shiftable(fmt_source.format.code, + fmt_sink.format.code, + parallel_shift)) + return -EPIPE; + } else if (fmt_source.format.code != fmt_sink.format.code) + return -EPIPE; } return 0; diff --git a/drivers/media/video/omap3isp/ispvideo.h b/drivers/media/video/omap3isp/ispvideo.h index 524a1acd0906..911bea64e78a 100644 --- a/drivers/media/video/omap3isp/ispvideo.h +++ b/drivers/media/video/omap3isp/ispvideo.h @@ -49,6 +49,8 @@ struct v4l2_pix_format; * bits. Identical to @code if the format is 10 bits wide or less. * @uncompressed: V4L2 media bus format code for the corresponding uncompressed * format. Identical to @code if the format is not DPCM compressed. + * @flavor: V4L2 media bus format code for the same pixel layout but + * shifted to be 8 bits per pixel. =0 if format is not shiftable. * @pixelformat: V4L2 pixel format FCC identifier * @bpp: Bits per pixel */ @@ -56,6 +58,7 @@ struct isp_format_info { enum v4l2_mbus_pixelcode code; enum v4l2_mbus_pixelcode truncated; enum v4l2_mbus_pixelcode uncompressed; + enum v4l2_mbus_pixelcode flavor; u32 pixelformat; unsigned int bpp; }; diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index 95f8b4e11e46..d142b40ea64e 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -527,7 +527,7 @@ static int fimc_cap_s_fmt_mplane(struct file *file, void *priv, if (ret) return ret; - if (vb2_is_streaming(&fimc->vid_cap.vbq) || fimc_capture_active(fimc)) + if (vb2_is_busy(&fimc->vid_cap.vbq) || fimc_capture_active(fimc)) return -EBUSY; frame = &ctx->d_frame; @@ -539,8 +539,10 @@ static int fimc_cap_s_fmt_mplane(struct file *file, void *priv, return -EINVAL; } - for (i = 0; i < frame->fmt->colplanes; i++) - frame->payload[i] = pix->plane_fmt[i].bytesperline * pix->height; + for (i = 0; i < frame->fmt->colplanes; i++) { + frame->payload[i] = + (pix->width * pix->height * frame->fmt->depth[i]) >> 3; + } /* Output DMA frame pixel size and offsets. */ frame->f_width = pix->plane_fmt[0].bytesperline * 8 diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index 6c919b38a3d8..dc91a8511af6 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -361,10 +361,20 @@ static void fimc_capture_irq_handler(struct fimc_dev *fimc) { struct fimc_vid_cap *cap = &fimc->vid_cap; struct fimc_vid_buffer *v_buf; + struct timeval *tv; + struct timespec ts; if (!list_empty(&cap->active_buf_q) && test_bit(ST_CAPT_RUN, &fimc->state)) { + ktime_get_real_ts(&ts); + v_buf = active_queue_pop(cap); + + tv = &v_buf->vb.v4l2_buf.timestamp; + tv->tv_sec = ts.tv_sec; + tv->tv_usec = ts.tv_nsec / NSEC_PER_USEC; + v_buf->vb.v4l2_buf.sequence = cap->frame_count++; + vb2_buffer_done(&v_buf->vb, VB2_BUF_STATE_DONE); } @@ -758,7 +768,7 @@ static void fimc_unlock(struct vb2_queue *vq) mutex_unlock(&ctx->fimc_dev->lock); } -struct vb2_ops fimc_qops = { +static struct vb2_ops fimc_qops = { .queue_setup = fimc_queue_setup, .buf_prepare = fimc_buf_prepare, .buf_queue = fimc_buf_queue, @@ -927,23 +937,23 @@ int fimc_vidioc_try_fmt_mplane(struct file *file, void *priv, pix->num_planes = fmt->memplanes; pix->colorspace = V4L2_COLORSPACE_JPEG; + for (i = 0; i < pix->num_planes; ++i) { - int bpl = pix->plane_fmt[i].bytesperline; + u32 bpl = pix->plane_fmt[i].bytesperline; + u32 *sizeimage = &pix->plane_fmt[i].sizeimage; - dbg("[%d] bpl: %d, depth: %d, w: %d, h: %d", - i, bpl, fmt->depth[i], pix->width, pix->height); + if (fmt->colplanes > 1 && (bpl == 0 || bpl < pix->width)) + bpl = pix->width; /* Planar */ - if (!bpl || (bpl * 8 / fmt->depth[i]) > pix->width) - bpl = (pix->width * fmt->depth[0]) >> 3; + if (fmt->colplanes == 1 && /* Packed */ + (bpl == 0 || ((bpl * 8) / fmt->depth[i]) < pix->width)) + bpl = (pix->width * fmt->depth[0]) / 8; - if (!pix->plane_fmt[i].sizeimage) - pix->plane_fmt[i].sizeimage = pix->height * bpl; + if (i == 0) /* Same bytesperline for each plane. */ + mod_x = bpl; - pix->plane_fmt[i].bytesperline = bpl; - - dbg("[%d]: bpl: %d, sizeimage: %d", - i, pix->plane_fmt[i].bytesperline, - pix->plane_fmt[i].sizeimage); + pix->plane_fmt[i].bytesperline = mod_x; + *sizeimage = (pix->width * pix->height * fmt->depth[i]) / 8; } return 0; @@ -965,7 +975,7 @@ static int fimc_m2m_s_fmt_mplane(struct file *file, void *priv, vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); - if (vb2_is_streaming(vq)) { + if (vb2_is_busy(vq)) { v4l2_err(&fimc->m2m.v4l2_dev, "queue (%d) busy\n", f->type); return -EBUSY; } @@ -985,8 +995,10 @@ static int fimc_m2m_s_fmt_mplane(struct file *file, void *priv, if (!frame->fmt) return -EINVAL; - for (i = 0; i < frame->fmt->colplanes; i++) - frame->payload[i] = pix->plane_fmt[i].bytesperline * pix->height; + for (i = 0; i < frame->fmt->colplanes; i++) { + frame->payload[i] = + (pix->width * pix->height * frame->fmt->depth[i]) / 8; + } frame->f_width = pix->plane_fmt[0].bytesperline * 8 / frame->fmt->depth[0]; @@ -1750,7 +1762,7 @@ static int __devexit fimc_remove(struct platform_device *pdev) } /* Image pixel limits, similar across several FIMC HW revisions. */ -static struct fimc_pix_limit s5p_pix_limit[3] = { +static struct fimc_pix_limit s5p_pix_limit[4] = { [0] = { .scaler_en_w = 3264, .scaler_dis_w = 8192, @@ -1775,6 +1787,14 @@ static struct fimc_pix_limit s5p_pix_limit[3] = { .out_rot_en_w = 1280, .out_rot_dis_w = 1920, }, + [3] = { + .scaler_en_w = 1920, + .scaler_dis_w = 8192, + .in_rot_en_h = 1366, + .in_rot_dis_w = 8192, + .out_rot_en_w = 1366, + .out_rot_dis_w = 1920, + }, }; static struct samsung_fimc_variant fimc0_variant_s5p = { @@ -1827,7 +1847,7 @@ static struct samsung_fimc_variant fimc2_variant_s5pv210 = { .pix_limit = &s5p_pix_limit[2], }; -static struct samsung_fimc_variant fimc0_variant_s5pv310 = { +static struct samsung_fimc_variant fimc0_variant_exynos4 = { .pix_hoff = 1, .has_inp_rot = 1, .has_out_rot = 1, @@ -1840,7 +1860,7 @@ static struct samsung_fimc_variant fimc0_variant_s5pv310 = { .pix_limit = &s5p_pix_limit[1], }; -static struct samsung_fimc_variant fimc2_variant_s5pv310 = { +static struct samsung_fimc_variant fimc2_variant_exynos4 = { .pix_hoff = 1, .has_cistatus2 = 1, .has_mainscaler_ext = 1, @@ -1848,7 +1868,7 @@ static struct samsung_fimc_variant fimc2_variant_s5pv310 = { .min_out_pixsize = 16, .hor_offs_align = 1, .out_buf_count = 32, - .pix_limit = &s5p_pix_limit[2], + .pix_limit = &s5p_pix_limit[3], }; /* S5PC100 */ @@ -1874,12 +1894,12 @@ static struct samsung_fimc_driverdata fimc_drvdata_s5pv210 = { }; /* S5PV310, S5PC210 */ -static struct samsung_fimc_driverdata fimc_drvdata_s5pv310 = { +static struct samsung_fimc_driverdata fimc_drvdata_exynos4 = { .variant = { - [0] = &fimc0_variant_s5pv310, - [1] = &fimc0_variant_s5pv310, - [2] = &fimc0_variant_s5pv310, - [3] = &fimc2_variant_s5pv310, + [0] = &fimc0_variant_exynos4, + [1] = &fimc0_variant_exynos4, + [2] = &fimc0_variant_exynos4, + [3] = &fimc2_variant_exynos4, }, .num_entities = 4, .lclk_frequency = 166000000UL, @@ -1893,8 +1913,8 @@ static struct platform_device_id fimc_driver_ids[] = { .name = "s5pv210-fimc", .driver_data = (unsigned long)&fimc_drvdata_s5pv210, }, { - .name = "s5pv310-fimc", - .driver_data = (unsigned long)&fimc_drvdata_s5pv310, + .name = "exynos4-fimc", + .driver_data = (unsigned long)&fimc_drvdata_exynos4, }, {}, }; diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 3fe54bf41142..134e86bf6d97 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -922,7 +922,7 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int /* Try 2560x1920, 1280x960, 640x480, 320x240 */ mf.width = 2560 >> shift; mf.height = 1920 >> shift; - ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, + ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, s_mbus_fmt, &mf); if (ret < 0) return ret; @@ -1224,7 +1224,7 @@ static int client_s_fmt(struct soc_camera_device *icd, struct v4l2_cropcap cap; int ret; - ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, + ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, s_mbus_fmt, mf); if (ret < 0) return ret; @@ -1254,7 +1254,7 @@ static int client_s_fmt(struct soc_camera_device *icd, tmp_h = min(2 * tmp_h, max_height); mf->width = tmp_w; mf->height = tmp_h; - ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, + ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, s_mbus_fmt, mf); dev_geo(dev, "Camera scaled to %ux%u\n", mf->width, mf->height); @@ -1658,7 +1658,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, mf.code = xlate->code; mf.colorspace = pix->colorspace; - ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, try_mbus_fmt, &mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, try_mbus_fmt, &mf); if (ret < 0) return ret; @@ -1682,7 +1682,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, */ mf.width = 2560; mf.height = 1920; - ret = v4l2_device_call_until_err(sd->v4l2_dev, 0, video, + ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, try_mbus_fmt, &mf); if (ret < 0) { /* Shouldn't actually happen... */ diff --git a/drivers/media/video/sh_mobile_csi2.c b/drivers/media/video/sh_mobile_csi2.c index dd1b81b1442b..98b87481fa94 100644 --- a/drivers/media/video/sh_mobile_csi2.c +++ b/drivers/media/video/sh_mobile_csi2.c @@ -38,6 +38,8 @@ struct sh_csi2 { void __iomem *base; struct platform_device *pdev; struct sh_csi2_client_config *client; + unsigned long (*query_bus_param)(struct soc_camera_device *); + int (*set_bus_param)(struct soc_camera_device *, unsigned long); }; static int sh_csi2_try_fmt(struct v4l2_subdev *sd, @@ -208,6 +210,7 @@ static int sh_csi2_notify(struct notifier_block *nb, case BUS_NOTIFY_BOUND_DRIVER: snprintf(priv->subdev.name, V4L2_SUBDEV_NAME_SIZE, "%s%s", dev_name(v4l2_dev->dev), ".mipi-csi"); + priv->subdev.grp_id = (long)icd; ret = v4l2_device_register_subdev(v4l2_dev, &priv->subdev); dev_dbg(dev, "%s(%p): ret(register_subdev) = %d\n", __func__, priv, ret); if (ret < 0) @@ -215,6 +218,8 @@ static int sh_csi2_notify(struct notifier_block *nb, priv->client = pdata->clients + i; + priv->set_bus_param = icd->ops->set_bus_param; + priv->query_bus_param = icd->ops->query_bus_param; icd->ops->set_bus_param = sh_csi2_set_bus_param; icd->ops->query_bus_param = sh_csi2_query_bus_param; @@ -226,8 +231,10 @@ static int sh_csi2_notify(struct notifier_block *nb, priv->client = NULL; /* Driver is about to be unbound */ - icd->ops->set_bus_param = NULL; - icd->ops->query_bus_param = NULL; + icd->ops->set_bus_param = priv->set_bus_param; + icd->ops->query_bus_param = priv->query_bus_param; + priv->set_bus_param = NULL; + priv->query_bus_param = NULL; v4l2_device_unregister_subdev(&priv->subdev); diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 46284489e4eb..3973f9a94753 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -996,10 +996,11 @@ static void soc_camera_free_i2c(struct soc_camera_device *icd) { struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd)); + struct i2c_adapter *adap = client->adapter; dev_set_drvdata(&icd->dev, NULL); v4l2_device_unregister_subdev(i2c_get_clientdata(client)); i2c_unregister_device(client); - i2c_put_adapter(client->adapter); + i2c_put_adapter(adap); } #else #define soc_camera_init_i2c(icd, icl) (-ENODEV) @@ -1071,6 +1072,9 @@ static int soc_camera_probe(struct device *dev) } } + sd = soc_camera_to_subdev(icd); + sd->grp_id = (long)icd; + /* At this point client .probe() should have run already */ ret = soc_camera_init_user_formats(icd); if (ret < 0) @@ -1092,7 +1096,6 @@ static int soc_camera_probe(struct device *dev) goto evidstart; /* Try to improve our guess of a reasonable window format */ - sd = soc_camera_to_subdev(icd); if (!v4l2_subdev_call(sd, video, g_mbus_fmt, &mf)) { icd->user_width = mf.width; icd->user_height = mf.height; diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c index 498e6742579e..6dc7196296b3 100644 --- a/drivers/media/video/v4l2-dev.c +++ b/drivers/media/video/v4l2-dev.c @@ -389,7 +389,8 @@ static int v4l2_open(struct inode *inode, struct file *filp) video_get(vdev); mutex_unlock(&videodev_lock); #if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) { + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && + vdev->vfl_type != VFL_TYPE_SUBDEV) { entity = media_entity_get(&vdev->entity); if (!entity) { ret = -EBUSY; @@ -415,7 +416,8 @@ err: /* decrease the refcount in case of an error */ if (ret) { #if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && + vdev->vfl_type != VFL_TYPE_SUBDEV) media_entity_put(entity); #endif video_put(vdev); @@ -437,7 +439,8 @@ static int v4l2_release(struct inode *inode, struct file *filp) mutex_unlock(vdev->lock); } #if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && + vdev->vfl_type != VFL_TYPE_SUBDEV) media_entity_put(&vdev->entity); #endif /* decrease the refcount unconditionally since the release() @@ -686,7 +689,8 @@ int __video_register_device(struct video_device *vdev, int type, int nr, #if defined(CONFIG_MEDIA_CONTROLLER) /* Part 5: Register the entity. */ - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) { + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && + vdev->vfl_type != VFL_TYPE_SUBDEV) { vdev->entity.type = MEDIA_ENT_T_DEVNODE_V4L; vdev->entity.name = vdev->name; vdev->entity.v4l.major = VIDEO_MAJOR; @@ -733,7 +737,8 @@ void video_unregister_device(struct video_device *vdev) return; #if defined(CONFIG_MEDIA_CONTROLLER) - if (vdev->v4l2_dev && vdev->v4l2_dev->mdev) + if (vdev->v4l2_dev && vdev->v4l2_dev->mdev && + vdev->vfl_type != VFL_TYPE_SUBDEV) media_device_unregister_entity(&vdev->entity); #endif diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c index 6698c77e0f64..6ba1461d51ef 100644 --- a/drivers/media/video/videobuf2-core.c +++ b/drivers/media/video/videobuf2-core.c @@ -37,6 +37,9 @@ module_param(debug, int, 0644); #define call_qop(q, op, args...) \ (((q)->ops->op) ? ((q)->ops->op(args)) : 0) +#define V4L2_BUFFER_STATE_FLAGS (V4L2_BUF_FLAG_MAPPED | V4L2_BUF_FLAG_QUEUED | \ + V4L2_BUF_FLAG_DONE | V4L2_BUF_FLAG_ERROR) + /** * __vb2_buf_mem_alloc() - allocate video memory for the given buffer */ @@ -51,7 +54,7 @@ static int __vb2_buf_mem_alloc(struct vb2_buffer *vb, for (plane = 0; plane < vb->num_planes; ++plane) { mem_priv = call_memop(q, plane, alloc, q->alloc_ctx[plane], plane_sizes[plane]); - if (!mem_priv) + if (IS_ERR_OR_NULL(mem_priv)) goto free; /* Associate allocator private data with this plane */ @@ -284,7 +287,7 @@ static int __fill_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b) struct vb2_queue *q = vb->vb2_queue; int ret = 0; - /* Copy back data such as timestamp, input, etc. */ + /* Copy back data such as timestamp, flags, input, etc. */ memcpy(b, &vb->v4l2_buf, offsetof(struct v4l2_buffer, m)); b->input = vb->v4l2_buf.input; b->reserved = vb->v4l2_buf.reserved; @@ -313,7 +316,10 @@ static int __fill_v4l2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b) b->m.userptr = vb->v4l2_planes[0].m.userptr; } - b->flags = 0; + /* + * Clear any buffer state related flags. + */ + b->flags &= ~V4L2_BUFFER_STATE_FLAGS; switch (vb->state) { case VB2_BUF_STATE_QUEUED: @@ -519,6 +525,7 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req) num_buffers = min_t(unsigned int, req->count, VIDEO_MAX_FRAME); memset(plane_sizes, 0, sizeof(plane_sizes)); memset(q->alloc_ctx, 0, sizeof(q->alloc_ctx)); + q->memory = req->memory; /* * Ask the driver how many buffers and planes per buffer it requires. @@ -560,8 +567,6 @@ int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req) ret = num_buffers; } - q->memory = req->memory; - /* * Return the number of successfully allocated buffers * to the userspace. @@ -715,6 +720,8 @@ static int __fill_vb2_buffer(struct vb2_buffer *vb, struct v4l2_buffer *b, vb->v4l2_buf.field = b->field; vb->v4l2_buf.timestamp = b->timestamp; + vb->v4l2_buf.input = b->input; + vb->v4l2_buf.flags = b->flags & ~V4L2_BUFFER_STATE_FLAGS; return 0; } diff --git a/drivers/media/video/videobuf2-dma-contig.c b/drivers/media/video/videobuf2-dma-contig.c index 58205d596138..a790a5f8c06f 100644 --- a/drivers/media/video/videobuf2-dma-contig.c +++ b/drivers/media/video/videobuf2-dma-contig.c @@ -46,7 +46,7 @@ static void *vb2_dma_contig_alloc(void *alloc_ctx, unsigned long size) GFP_KERNEL); if (!buf->vaddr) { dev_err(conf->dev, "dma_alloc_coherent of size %ld failed\n", - buf->size); + size); kfree(buf); return ERR_PTR(-ENOMEM); } diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index 96c0b34ba8db..657b9f4b6f9b 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -400,7 +400,7 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr) doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE); doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - /* We can't' use dev_ready here, but at least we wait for the + /* We can't use dev_ready here, but at least we wait for the * command to complete */ udelay(50); diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index fe77e8223841..e8c19def1b0f 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -173,7 +173,7 @@ static int pcmcia_access_config(struct pcmcia_device *p_dev, c = p_dev->function_config; if (!(c->state & CONFIG_LOCKED)) { - dev_dbg(&p_dev->dev, "Configuration isn't't locked\n"); + dev_dbg(&p_dev->dev, "Configuration isn't locked\n"); mutex_unlock(&s->ops_mutex); return -EACCES; } diff --git a/drivers/rtc/rtc-max8925.c b/drivers/rtc/rtc-max8925.c index 174036dda786..20494b5edc3c 100644 --- a/drivers/rtc/rtc-max8925.c +++ b/drivers/rtc/rtc-max8925.c @@ -257,6 +257,8 @@ static int __devinit max8925_rtc_probe(struct platform_device *pdev) goto out_irq; } + dev_set_drvdata(&pdev->dev, info); + info->rtc_dev = rtc_device_register("max8925-rtc", &pdev->dev, &max8925_rtc_ops, THIS_MODULE); ret = PTR_ERR(info->rtc_dev); @@ -265,7 +267,6 @@ static int __devinit max8925_rtc_probe(struct platform_device *pdev) goto out_rtc; } - dev_set_drvdata(&pdev->dev, info); platform_set_drvdata(pdev, info); return 0; diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index 29143eda9dd9..85dddb1e4126 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -239,7 +239,6 @@ static void dasd_ext_handler(unsigned int ext_int_code, addr_t ip; int rc; - kstat_cpu(smp_processor_id()).irqs[EXTINT_DSD]++; switch (ext_int_code >> 24) { case DASD_DIAG_CODE_31BIT: ip = (addr_t) param32; @@ -250,6 +249,7 @@ static void dasd_ext_handler(unsigned int ext_int_code, default: return; } + kstat_cpu(smp_processor_id()).irqs[EXTINT_DSD]++; if (!ip) { /* no intparm: unsolicited interrupt */ DBF_EVENT(DBF_NOTICE, "%s", "caught unsolicited " "interrupt"); diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index 414427d64a8f..607998f0b7d8 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -381,10 +381,10 @@ static void kvm_extint_handler(unsigned int ext_int_code, u16 subcode; u32 param; - kstat_cpu(smp_processor_id()).irqs[EXTINT_VRT]++; subcode = ext_int_code >> 16; if ((subcode & 0xff00) != VIRTIO_SUBCODE_64) return; + kstat_cpu(smp_processor_id()).irqs[EXTINT_VRT]++; /* The LSB might be overloaded, we have to mask it */ vq = (struct virtqueue *)(param64 & ~1UL); diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c index 564e6ecd17c2..0119b8147797 100644 --- a/drivers/scsi/device_handler/scsi_dh.c +++ b/drivers/scsi/device_handler/scsi_dh.c @@ -394,12 +394,14 @@ int scsi_dh_activate(struct request_queue *q, activate_complete fn, void *data) unsigned long flags; struct scsi_device *sdev; struct scsi_device_handler *scsi_dh = NULL; + struct device *dev = NULL; spin_lock_irqsave(q->queue_lock, flags); sdev = q->queuedata; if (sdev && sdev->scsi_dh_data) scsi_dh = sdev->scsi_dh_data->scsi_dh; - if (!scsi_dh || !get_device(&sdev->sdev_gendev) || + dev = get_device(&sdev->sdev_gendev); + if (!scsi_dh || !dev || sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) err = SCSI_DH_NOSYS; @@ -410,12 +412,13 @@ int scsi_dh_activate(struct request_queue *q, activate_complete fn, void *data) if (err) { if (fn) fn(data, err); - return err; + goto out; } if (scsi_dh->activate) err = scsi_dh->activate(sdev, fn, data); - put_device(&sdev->sdev_gendev); +out: + put_device(dev); return err; } EXPORT_SYMBOL_GPL(scsi_dh_activate); diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index 1c6d2b405eef..d72f1f2b1392 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -688,6 +688,13 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, goto out; } + /* Check for overflow and wraparound */ + if (karg.data_sge_offset * 4 > ioc->request_sz || + karg.data_sge_offset > (UINT_MAX / 4)) { + ret = -EINVAL; + goto out; + } + /* copy in request message frame from user */ if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) { printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, __LINE__, @@ -1963,7 +1970,7 @@ _ctl_diag_read_buffer(void __user *arg, enum block_state state) Mpi2DiagBufferPostReply_t *mpi_reply; int rc, i; u8 buffer_type; - unsigned long timeleft; + unsigned long timeleft, request_size, copy_size; u16 smid; u16 ioc_status; u8 issue_reset = 0; @@ -1999,6 +2006,8 @@ _ctl_diag_read_buffer(void __user *arg, enum block_state state) return -ENOMEM; } + request_size = ioc->diag_buffer_sz[buffer_type]; + if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) { printk(MPT2SAS_ERR_FMT "%s: either the starting_offset " "or bytes_to_read are not 4 byte aligned\n", ioc->name, @@ -2006,13 +2015,23 @@ _ctl_diag_read_buffer(void __user *arg, enum block_state state) return -EINVAL; } + if (karg.starting_offset > request_size) + return -EINVAL; + diag_data = (void *)(request_data + karg.starting_offset); dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: diag_buffer(%p), " "offset(%d), sz(%d)\n", ioc->name, __func__, diag_data, karg.starting_offset, karg.bytes_to_read)); + /* Truncate data on requests that are too large */ + if ((diag_data + karg.bytes_to_read < diag_data) || + (diag_data + karg.bytes_to_read > request_data + request_size)) + copy_size = request_size - karg.starting_offset; + else + copy_size = karg.bytes_to_read; + if (copy_to_user((void __user *)uarg->diagnostic_data, - diag_data, karg.bytes_to_read)) { + diag_data, copy_size)) { printk(MPT2SAS_ERR_FMT "%s: Unable to write " "mpt_diag_read_buffer_t data @ %p\n", ioc->name, __func__, diag_data); diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index 96d5ad0c1e42..7f636b118287 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -3814,6 +3814,9 @@ static long pmcraid_ioctl_passthrough( rc = -EFAULT; goto out_free_buffer; } + } else if (request_size < 0) { + rc = -EINVAL; + goto out_free_buffer; } /* check if we have any additional command parameters */ diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index e44ff64233fd..e63912510fb9 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -322,14 +322,8 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work) kfree(evt); } - if (sdev->request_queue) { - sdev->request_queue->queuedata = NULL; - /* user context needed to free queue */ - scsi_free_queue(sdev->request_queue); - /* temporary expedient, try to catch use of queue lock - * after free of sdev */ - sdev->request_queue = NULL; - } + /* NULL queue means the device can't be used */ + sdev->request_queue = NULL; scsi_target_reap(scsi_target(sdev)); @@ -937,6 +931,12 @@ void __scsi_remove_device(struct scsi_device *sdev) if (sdev->host->hostt->slave_destroy) sdev->host->hostt->slave_destroy(sdev); transport_destroy_device(dev); + + /* cause the request function to reject all I/O requests */ + sdev->request_queue->queuedata = NULL; + + /* Freeing the queue signals to block that we're done */ + scsi_free_queue(sdev->request_queue); put_device(dev); } diff --git a/drivers/staging/rt2860/common/cmm_data_pci.c b/drivers/staging/rt2860/common/cmm_data_pci.c index bef0bbd8cef7..f01a51c381f1 100644 --- a/drivers/staging/rt2860/common/cmm_data_pci.c +++ b/drivers/staging/rt2860/common/cmm_data_pci.c @@ -444,7 +444,7 @@ int RTMPCheckRxError(struct rt_rtmp_adapter *pAd, return (NDIS_STATUS_FAILURE); } } - /* Drop not U2M frames, can't's drop here because we will drop beacon in this case */ + /* Drop not U2M frames, can't drop here because we will drop beacon in this case */ /* I am kind of doubting the U2M bit operation */ /* if (pRxD->U2M == 0) */ /* return(NDIS_STATUS_FAILURE); */ diff --git a/drivers/staging/rt2860/common/cmm_data_usb.c b/drivers/staging/rt2860/common/cmm_data_usb.c index 5637857ae9eb..83a62faa7e57 100644 --- a/drivers/staging/rt2860/common/cmm_data_usb.c +++ b/drivers/staging/rt2860/common/cmm_data_usb.c @@ -860,7 +860,7 @@ int RTMPCheckRxError(struct rt_rtmp_adapter *pAd, DBGPRINT_RAW(RT_DEBUG_ERROR, ("received packet too long\n")); return NDIS_STATUS_FAILURE; } - /* Drop not U2M frames, can't's drop here because we will drop beacon in this case */ + /* Drop not U2M frames, can't drop here because we will drop beacon in this case */ /* I am kind of doubting the U2M bit operation */ /* if (pRxD->U2M == 0) */ /* return(NDIS_STATUS_FAILURE); */ diff --git a/drivers/staging/spectra/ffsport.c b/drivers/staging/spectra/ffsport.c index 20dae73d3b78..506547b603e1 100644 --- a/drivers/staging/spectra/ffsport.c +++ b/drivers/staging/spectra/ffsport.c @@ -653,7 +653,7 @@ static int SBD_setup_device(struct spectra_nand_dev *dev, int which) } dev->queue->queuedata = dev; - /* As Linux block layer does't support >4KB hardware sector, */ + /* As Linux block layer doesn't support >4KB hardware sector, */ /* Here we force report 512 byte hardware sector size to Kernel */ blk_queue_logical_block_size(dev->queue, 512); diff --git a/drivers/staging/tidspbridge/dynload/cload.c b/drivers/staging/tidspbridge/dynload/cload.c index 5cecd237e3f6..fe1ef0addb09 100644 --- a/drivers/staging/tidspbridge/dynload/cload.c +++ b/drivers/staging/tidspbridge/dynload/cload.c @@ -718,7 +718,7 @@ static void dload_symbols(struct dload_state *dlthis) * as a temporary for .dllview record construction. * Allocate storage for the whole table. Add 1 to the section count * in case a trampoline section is auto-generated as well as the - * size of the trampoline section name so DLLView does't get lost. + * size of the trampoline section name so DLLView doesn't get lost. */ siz = sym_count * sizeof(struct local_symbol); diff --git a/drivers/staging/tty/specialix.c b/drivers/staging/tty/specialix.c index cb24c6d999db..5c3598ec7456 100644 --- a/drivers/staging/tty/specialix.c +++ b/drivers/staging/tty/specialix.c @@ -978,7 +978,7 @@ static void sx_change_speed(struct specialix_board *bp, spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CAR, port_No(port)); - /* The Specialix board does't implement the RTS lines. + /* The Specialix board doesn't implement the RTS lines. They are used to set the IRQ level. Don't touch them. */ if (sx_crtscts(tty)) port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS); diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 2e61fe1b6b8c..8f4b81de3ae2 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -718,7 +718,7 @@ struct btrfs_space_info { u64 total_bytes; /* total bytes in the space, this doesn't take mirrors into account */ u64 bytes_used; /* total bytes used, - this does't take mirrors into account */ + this doesn't take mirrors into account */ u64 bytes_pinned; /* total bytes pinned, will be freed when the transaction finishes */ u64 bytes_reserved; /* total bytes the allocator has reserved for diff --git a/fs/file.c b/fs/file.c index 0be344755c02..4c6992d8f3ba 100644 --- a/fs/file.c +++ b/fs/file.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -39,14 +40,17 @@ int sysctl_nr_open_max = 1024 * 1024; /* raised later */ */ static DEFINE_PER_CPU(struct fdtable_defer, fdtable_defer_list); -static inline void *alloc_fdmem(unsigned int size) +static void *alloc_fdmem(unsigned int size) { - void *data; - - data = kmalloc(size, GFP_KERNEL|__GFP_NOWARN); - if (data != NULL) - return data; - + /* + * Very large allocations can stress page reclaim, so fall back to + * vmalloc() if the allocation size will be considered "large" by the VM. + */ + if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) { + void *data = kmalloc(size, GFP_KERNEL|__GFP_NOWARN); + if (data != NULL) + return data; + } return vmalloc(size); } diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c index 89fc160fd5b0..1f063bacd285 100644 --- a/fs/nfs/namespace.c +++ b/fs/nfs/namespace.c @@ -119,7 +119,7 @@ Elong: } #ifdef CONFIG_NFS_V4 -static rpc_authflavor_t nfs_find_best_sec(struct nfs4_secinfo_flavors *flavors, struct inode *inode) +static rpc_authflavor_t nfs_find_best_sec(struct nfs4_secinfo_flavors *flavors) { struct gss_api_mech *mech; struct xdr_netobj oid; @@ -166,7 +166,7 @@ static int nfs_negotiate_security(const struct dentry *parent, } flavors = page_address(page); ret = secinfo(parent->d_inode, &dentry->d_name, flavors); - *flavor = nfs_find_best_sec(flavors, dentry->d_inode); + *flavor = nfs_find_best_sec(flavors); put_page(page); } diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index e1c261ddd65d..c4a69833dd0d 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -47,6 +47,7 @@ enum nfs4_client_state { NFS4CLNT_LAYOUTRECALL, NFS4CLNT_SESSION_RESET, NFS4CLNT_RECALL_SLOT, + NFS4CLNT_LEASE_CONFIRM, }; enum nfs4_session_state { diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 9bf41eab3e46..69c0f3c5ee7a 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -46,6 +46,7 @@ #include #include #include +#include #include #include #include @@ -443,8 +444,8 @@ static int nfs41_sequence_done(struct rpc_task *task, struct nfs4_sequence_res * if (res->sr_status == 1) res->sr_status = NFS_OK; - /* -ERESTARTSYS can result in skipping nfs41_sequence_setup */ - if (!res->sr_slot) + /* don't increment the sequence number if the task wasn't sent */ + if (!RPC_WAS_SENT(task)) goto out; /* Check the SEQUENCE operation status */ @@ -2185,9 +2186,14 @@ static int nfs4_lookup_root(struct nfs_server *server, struct nfs_fh *fhandle, struct nfs4_exception exception = { }; int err; do { - err = nfs4_handle_exception(server, - _nfs4_lookup_root(server, fhandle, info), - &exception); + err = _nfs4_lookup_root(server, fhandle, info); + switch (err) { + case 0: + case -NFS4ERR_WRONGSEC: + break; + default: + err = nfs4_handle_exception(server, err, &exception); + } } while (exception.retry); return err; } @@ -2208,25 +2214,47 @@ out: return ret; } +static int nfs4_find_root_sec(struct nfs_server *server, struct nfs_fh *fhandle, + struct nfs_fsinfo *info) +{ + int i, len, status = 0; + rpc_authflavor_t flav_array[NFS_MAX_SECFLAVORS]; + + len = gss_mech_list_pseudoflavors(&flav_array[0]); + flav_array[len] = RPC_AUTH_NULL; + len += 1; + + for (i = 0; i < len; i++) { + status = nfs4_lookup_root_sec(server, fhandle, info, flav_array[i]); + if (status == -NFS4ERR_WRONGSEC || status == -EACCES) + continue; + break; + } + /* + * -EACCESS could mean that the user doesn't have correct permissions + * to access the mount. It could also mean that we tried to mount + * with a gss auth flavor, but rpc.gssd isn't running. Either way, + * existing mount programs don't handle -EACCES very well so it should + * be mapped to -EPERM instead. + */ + if (status == -EACCES) + status = -EPERM; + return status; +} + /* * get the file handle for the "/" directory on the server */ static int nfs4_proc_get_root(struct nfs_server *server, struct nfs_fh *fhandle, struct nfs_fsinfo *info) { - int i, len, status = 0; - rpc_authflavor_t flav_array[NFS_MAX_SECFLAVORS + 2]; - - flav_array[0] = RPC_AUTH_UNIX; - len = gss_mech_list_pseudoflavors(&flav_array[1]); - flav_array[1+len] = RPC_AUTH_NULL; - len += 2; - - for (i = 0; i < len; i++) { - status = nfs4_lookup_root_sec(server, fhandle, info, flav_array[i]); - if (status != -EPERM) - break; - } + int status = nfs4_lookup_root(server, fhandle, info); + if ((status == -NFS4ERR_WRONGSEC) && !(server->flags & NFS_MOUNT_SECFLAVOUR)) + /* + * A status of -NFS4ERR_WRONGSEC will be mapped to -EPERM + * by nfs4_map_errors() as this function exits. + */ + status = nfs4_find_root_sec(server, fhandle, info); if (status == 0) status = nfs4_server_capabilities(server, fhandle); if (status == 0) @@ -3723,21 +3751,20 @@ int nfs4_proc_setclientid(struct nfs_client *clp, u32 program, sizeof(setclientid.sc_uaddr), "%s.%u.%u", clp->cl_ipaddr, port >> 8, port & 255); - status = rpc_call_sync(clp->cl_rpcclient, &msg, 0); + status = rpc_call_sync(clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT); if (status != -NFS4ERR_CLID_INUSE) break; - if (signalled()) + if (loop != 0) { + ++clp->cl_id_uniquifier; break; - if (loop++ & 1) - ssleep(clp->cl_lease_time / HZ + 1); - else - if (++clp->cl_id_uniquifier == 0) - break; + } + ++loop; + ssleep(clp->cl_lease_time / HZ + 1); } return status; } -static int _nfs4_proc_setclientid_confirm(struct nfs_client *clp, +int nfs4_proc_setclientid_confirm(struct nfs_client *clp, struct nfs4_setclientid_res *arg, struct rpc_cred *cred) { @@ -3752,7 +3779,7 @@ static int _nfs4_proc_setclientid_confirm(struct nfs_client *clp, int status; now = jiffies; - status = rpc_call_sync(clp->cl_rpcclient, &msg, 0); + status = rpc_call_sync(clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT); if (status == 0) { spin_lock(&clp->cl_lock); clp->cl_lease_time = fsinfo.lease_time * HZ; @@ -3762,26 +3789,6 @@ static int _nfs4_proc_setclientid_confirm(struct nfs_client *clp, return status; } -int nfs4_proc_setclientid_confirm(struct nfs_client *clp, - struct nfs4_setclientid_res *arg, - struct rpc_cred *cred) -{ - long timeout = 0; - int err; - do { - err = _nfs4_proc_setclientid_confirm(clp, arg, cred); - switch (err) { - case 0: - return err; - case -NFS4ERR_RESOURCE: - /* The IBM lawyers misread another document! */ - case -NFS4ERR_DELAY: - err = nfs4_delay(clp->cl_rpcclient, &timeout); - } - } while (err == 0); - return err; -} - struct nfs4_delegreturndata { struct nfs4_delegreturnargs args; struct nfs4_delegreturnres res; @@ -4786,7 +4793,7 @@ int nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred) init_utsname()->domainname, clp->cl_rpcclient->cl_auth->au_flavor); - status = rpc_call_sync(clp->cl_rpcclient, &msg, 0); + status = rpc_call_sync(clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT); if (!status) status = nfs4_check_cl_exchange_flags(clp->cl_exchange_flags); dprintk("<-- %s status= %d\n", __func__, status); @@ -4869,7 +4876,8 @@ int nfs4_proc_get_lease_time(struct nfs_client *clp, struct nfs_fsinfo *fsinfo) .rpc_client = clp->cl_rpcclient, .rpc_message = &msg, .callback_ops = &nfs4_get_lease_time_ops, - .callback_data = &data + .callback_data = &data, + .flags = RPC_TASK_TIMEOUT, }; int status; @@ -5171,7 +5179,7 @@ static int _nfs4_proc_create_session(struct nfs_client *clp) nfs4_init_channel_attrs(&args); args.flags = (SESSION4_PERSIST | SESSION4_BACK_CHAN); - status = rpc_call_sync(session->clp->cl_rpcclient, &msg, 0); + status = rpc_call_sync(session->clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT); if (!status) /* Verify the session's negotiated channel_attrs values */ @@ -5194,20 +5202,10 @@ int nfs4_proc_create_session(struct nfs_client *clp) int status; unsigned *ptr; struct nfs4_session *session = clp->cl_session; - long timeout = 0; - int err; dprintk("--> %s clp=%p session=%p\n", __func__, clp, session); - do { - status = _nfs4_proc_create_session(clp); - if (status == -NFS4ERR_DELAY) { - err = nfs4_delay(clp->cl_rpcclient, &timeout); - if (err) - status = err; - } - } while (status == -NFS4ERR_DELAY); - + status = _nfs4_proc_create_session(clp); if (status) goto out; @@ -5248,7 +5246,7 @@ int nfs4_proc_destroy_session(struct nfs4_session *session) msg.rpc_argp = session; msg.rpc_resp = NULL; msg.rpc_cred = NULL; - status = rpc_call_sync(session->clp->cl_rpcclient, &msg, 0); + status = rpc_call_sync(session->clp->cl_rpcclient, &msg, RPC_TASK_TIMEOUT); if (status) printk(KERN_WARNING diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index a6804f704d9d..036f5adc9e1f 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -64,10 +64,15 @@ static LIST_HEAD(nfs4_clientid_list); int nfs4_init_clientid(struct nfs_client *clp, struct rpc_cred *cred) { - struct nfs4_setclientid_res clid; + struct nfs4_setclientid_res clid = { + .clientid = clp->cl_clientid, + .confirm = clp->cl_confirm, + }; unsigned short port; int status; + if (test_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state)) + goto do_confirm; port = nfs_callback_tcpport; if (clp->cl_addr.ss_family == AF_INET6) port = nfs_callback_tcpport6; @@ -75,10 +80,14 @@ int nfs4_init_clientid(struct nfs_client *clp, struct rpc_cred *cred) status = nfs4_proc_setclientid(clp, NFS4_CALLBACK, port, cred, &clid); if (status != 0) goto out; + clp->cl_clientid = clid.clientid; + clp->cl_confirm = clid.confirm; + set_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state); +do_confirm: status = nfs4_proc_setclientid_confirm(clp, &clid, cred); if (status != 0) goto out; - clp->cl_clientid = clid.clientid; + clear_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state); nfs4_schedule_state_renewal(clp); out: return status; @@ -230,13 +239,18 @@ int nfs41_init_clientid(struct nfs_client *clp, struct rpc_cred *cred) { int status; + if (test_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state)) + goto do_confirm; nfs4_begin_drain_session(clp); status = nfs4_proc_exchange_id(clp, cred); if (status != 0) goto out; + set_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state); +do_confirm: status = nfs4_proc_create_session(clp); if (status != 0) goto out; + clear_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state); nfs41_setup_state_renewal(clp); nfs_mark_client_ready(clp, NFS_CS_READY); out: @@ -1584,20 +1598,23 @@ static int nfs4_recall_slot(struct nfs_client *clp) { return 0; } */ static void nfs4_set_lease_expired(struct nfs_client *clp, int status) { - if (nfs4_has_session(clp)) { - switch (status) { - case -NFS4ERR_DELAY: - case -NFS4ERR_CLID_INUSE: - case -EAGAIN: - break; + switch (status) { + case -NFS4ERR_CLID_INUSE: + case -NFS4ERR_STALE_CLIENTID: + clear_bit(NFS4CLNT_LEASE_CONFIRM, &clp->cl_state); + break; + case -NFS4ERR_DELAY: + case -ETIMEDOUT: + case -EAGAIN: + ssleep(1); + break; - case -EKEYEXPIRED: - nfs4_warn_keyexpired(clp->cl_hostname); - case -NFS4ERR_NOT_SAME: /* FixMe: implement recovery - * in nfs4_exchange_id */ - default: - return; - } + case -EKEYEXPIRED: + nfs4_warn_keyexpired(clp->cl_hostname); + case -NFS4ERR_NOT_SAME: /* FixMe: implement recovery + * in nfs4_exchange_id */ + default: + return; } set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state); } @@ -1607,7 +1624,7 @@ static void nfs4_state_manager(struct nfs_client *clp) int status = 0; /* Ensure exclusive access to NFSv4 state */ - for(;;) { + do { if (test_and_clear_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state)) { /* We're going to have to re-establish a clientid */ status = nfs4_reclaim_lease(clp); @@ -1691,7 +1708,7 @@ static void nfs4_state_manager(struct nfs_client *clp) break; if (test_and_set_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) != 0) break; - } + } while (atomic_read(&clp->cl_count) > 1); return; out_error: printk(KERN_WARNING "Error: state manager failed on NFSv4 server %s" diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index dddfb5795d7b..c3ccd2c46834 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -1452,26 +1452,25 @@ static void encode_read(struct xdr_stream *xdr, const struct nfs_readargs *args, static void encode_readdir(struct xdr_stream *xdr, const struct nfs4_readdir_arg *readdir, struct rpc_rqst *req, struct compound_hdr *hdr) { - uint32_t attrs[2] = {0, 0}; + uint32_t attrs[2] = { + FATTR4_WORD0_RDATTR_ERROR, + FATTR4_WORD1_MOUNTED_ON_FILEID, + }; uint32_t dircount = readdir->count >> 1; __be32 *p; if (readdir->plus) { attrs[0] |= FATTR4_WORD0_TYPE|FATTR4_WORD0_CHANGE|FATTR4_WORD0_SIZE| - FATTR4_WORD0_FSID|FATTR4_WORD0_FILEHANDLE; + FATTR4_WORD0_FSID|FATTR4_WORD0_FILEHANDLE|FATTR4_WORD0_FILEID; attrs[1] |= FATTR4_WORD1_MODE|FATTR4_WORD1_NUMLINKS|FATTR4_WORD1_OWNER| FATTR4_WORD1_OWNER_GROUP|FATTR4_WORD1_RAWDEV| FATTR4_WORD1_SPACE_USED|FATTR4_WORD1_TIME_ACCESS| FATTR4_WORD1_TIME_METADATA|FATTR4_WORD1_TIME_MODIFY; dircount >>= 1; } - attrs[0] |= FATTR4_WORD0_RDATTR_ERROR|FATTR4_WORD0_FILEID; - attrs[1] |= FATTR4_WORD1_MOUNTED_ON_FILEID; - /* Switch to mounted_on_fileid if the server supports it */ - if (readdir->bitmask[1] & FATTR4_WORD1_MOUNTED_ON_FILEID) - attrs[0] &= ~FATTR4_WORD0_FILEID; - else - attrs[1] &= ~FATTR4_WORD1_MOUNTED_ON_FILEID; + /* Use mounted_on_fileid only if the server supports it */ + if (!(readdir->bitmask[1] & FATTR4_WORD1_MOUNTED_ON_FILEID)) + attrs[0] |= FATTR4_WORD0_FILEID; p = reserve_space(xdr, 12+NFS4_VERIFIER_SIZE+20); *p++ = cpu_to_be32(OP_READDIR); @@ -3140,7 +3139,7 @@ static int decode_attr_mounted_on_fileid(struct xdr_stream *xdr, uint32_t *bitma goto out_overflow; xdr_decode_hyper(p, fileid); bitmap[1] &= ~FATTR4_WORD1_MOUNTED_ON_FILEID; - ret = NFS_ATTR_FATTR_FILEID; + ret = NFS_ATTR_FATTR_MOUNTED_ON_FILEID; } dprintk("%s: fileid=%Lu\n", __func__, (unsigned long long)*fileid); return ret; @@ -4002,7 +4001,6 @@ static int decode_getfattr_attrs(struct xdr_stream *xdr, uint32_t *bitmap, { int status; umode_t fmode = 0; - uint64_t fileid; uint32_t type; status = decode_attr_type(xdr, bitmap, &type); @@ -4101,13 +4099,10 @@ static int decode_getfattr_attrs(struct xdr_stream *xdr, uint32_t *bitmap, goto xdr_error; fattr->valid |= status; - status = decode_attr_mounted_on_fileid(xdr, bitmap, &fileid); + status = decode_attr_mounted_on_fileid(xdr, bitmap, &fattr->mounted_on_fileid); if (status < 0) goto xdr_error; - if (status != 0 && !(fattr->valid & status)) { - fattr->fileid = fileid; - fattr->valid |= status; - } + fattr->valid |= status; xdr_error: dprintk("%s: xdr returned %d\n", __func__, -status); @@ -4838,17 +4833,21 @@ static int decode_secinfo(struct xdr_stream *xdr, struct nfs4_secinfo_res *res) struct nfs4_secinfo_flavor *sec_flavor; int status; __be32 *p; - int i; + int i, num_flavors; status = decode_op_hdr(xdr, OP_SECINFO); + if (status) + goto out; p = xdr_inline_decode(xdr, 4); if (unlikely(!p)) goto out_overflow; - res->flavors->num_flavors = be32_to_cpup(p); - for (i = 0; i < res->flavors->num_flavors; i++) { + res->flavors->num_flavors = 0; + num_flavors = be32_to_cpup(p); + + for (i = 0; i < num_flavors; i++) { sec_flavor = &res->flavors->flavors[i]; - if ((char *)&sec_flavor[1] - (char *)res > PAGE_SIZE) + if ((char *)&sec_flavor[1] - (char *)res->flavors > PAGE_SIZE) break; p = xdr_inline_decode(xdr, 4); @@ -4857,13 +4856,15 @@ static int decode_secinfo(struct xdr_stream *xdr, struct nfs4_secinfo_res *res) sec_flavor->flavor = be32_to_cpup(p); if (sec_flavor->flavor == RPC_AUTH_GSS) { - if (decode_secinfo_gss(xdr, sec_flavor)) - break; + status = decode_secinfo_gss(xdr, sec_flavor); + if (status) + goto out; } + res->flavors->num_flavors++; } - return 0; - +out: + return status; out_overflow: print_overflow_msg(__func__, xdr); return -EIO; @@ -6408,7 +6409,9 @@ int nfs4_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry, if (decode_getfattr_attrs(xdr, bitmap, entry->fattr, entry->fh, entry->server, 1) < 0) goto out_overflow; - if (entry->fattr->valid & NFS_ATTR_FATTR_FILEID) + if (entry->fattr->valid & NFS_ATTR_FATTR_MOUNTED_ON_FILEID) + entry->ino = entry->fattr->mounted_on_fileid; + else if (entry->fattr->valid & NFS_ATTR_FATTR_FILEID) entry->ino = entry->fattr->fileid; entry->d_type = DT_UNKNOWN; diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index d9ab97269ce6..ff681ab65d31 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -1004,6 +1004,7 @@ pnfs_set_layoutcommit(struct nfs_write_data *wdata) { struct nfs_inode *nfsi = NFS_I(wdata->inode); loff_t end_pos = wdata->args.offset + wdata->res.count; + bool mark_as_dirty = false; spin_lock(&nfsi->vfs_inode.i_lock); if (!test_and_set_bit(NFS_INO_LAYOUTCOMMIT, &nfsi->flags)) { @@ -1011,13 +1012,18 @@ pnfs_set_layoutcommit(struct nfs_write_data *wdata) get_lseg(wdata->lseg); wdata->lseg->pls_lc_cred = get_rpccred(wdata->args.context->state->owner->so_cred); - mark_inode_dirty_sync(wdata->inode); + mark_as_dirty = true; dprintk("%s: Set layoutcommit for inode %lu ", __func__, wdata->inode->i_ino); } if (end_pos > wdata->lseg->pls_end_pos) wdata->lseg->pls_end_pos = end_pos; spin_unlock(&nfsi->vfs_inode.i_lock); + + /* if pnfs_layoutcommit_inode() runs between inode locks, the next one + * will be a noop because NFS_INO_LAYOUTCOMMIT will not be set */ + if (mark_as_dirty) + mark_inode_dirty_sync(wdata->inode); } EXPORT_SYMBOL_GPL(pnfs_set_layoutcommit); diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 2b8e9a5e366a..e288f06d3fa7 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1004,6 +1004,7 @@ static int nfs_parse_security_flavors(char *value, return 0; } + mnt->flags |= NFS_MOUNT_SECFLAVOUR; mnt->auth_flavor_len = 1; return 1; } @@ -1976,6 +1977,15 @@ nfs_remount(struct super_block *sb, int *flags, char *raw_data) if (error < 0) goto out; + /* + * noac is a special case. It implies -o sync, but that's not + * necessarily reflected in the mtab options. do_remount_sb + * will clear MS_SYNCHRONOUS if -o sync wasn't specified in the + * remount options, so we have to explicitly reset it. + */ + if (data->flags & NFS_MOUNT_NOAC) + *flags |= MS_SYNCHRONOUS; + /* compare new mount options with old ones */ error = nfs_compare_remount_data(nfss, data); out: @@ -2235,8 +2245,7 @@ static struct dentry *nfs_fs_mount(struct file_system_type *fs_type, if (!s->s_root) { /* initial superblock/root creation */ nfs_fill_super(s, data); - nfs_fscache_get_super_cookie( - s, data ? data->fscache_uniq : NULL, NULL); + nfs_fscache_get_super_cookie(s, data->fscache_uniq, NULL); } mntroot = nfs_get_root(s, mntfh, dev_name); diff --git a/fs/nfs/write.c b/fs/nfs/write.c index e4cbc11a74ab..3bd5d7e80f6c 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -680,7 +680,6 @@ static int nfs_writepage_setup(struct nfs_open_context *ctx, struct page *page, req = nfs_setup_write_request(ctx, page, offset, count); if (IS_ERR(req)) return PTR_ERR(req); - nfs_mark_request_dirty(req); /* Update file length */ nfs_grow_file(page, offset, count); nfs_mark_uptodate(page, req->wb_pgbase, req->wb_bytes); @@ -1418,8 +1417,7 @@ static void nfs_commit_done(struct rpc_task *task, void *calldata) task->tk_pid, task->tk_status); /* Call the NFS version-specific code */ - if (NFS_PROTO(data->inode)->commit_done(task, data) != 0) - return; + NFS_PROTO(data->inode)->commit_done(task, data); } void nfs_commit_release_pages(struct nfs_write_data *data) diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index b68f87a83924..938387a10d5d 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -1019,7 +1019,7 @@ struct ocfs2_xattr_entry { __le16 xe_name_offset; /* byte offset from the 1st entry in the local xattr storage(inode, xattr block or xattr bucket). */ - __u8 xe_name_len; /* xattr name len, does't include prefix. */ + __u8 xe_name_len; /* xattr name len, doesn't include prefix. */ __u8 xe_type; /* the low 7 bits indicate the name prefix * type and the highest bit indicates whether * the EA is stored in the local storage. */ diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h index f22e7fe4b6db..ade09d7b4271 100644 --- a/include/drm/drm_fb_helper.h +++ b/include/drm/drm_fb_helper.h @@ -118,6 +118,7 @@ int drm_fb_helper_setcolreg(unsigned regno, unsigned transp, struct fb_info *info); +bool drm_fb_helper_restore_fbdev_mode(struct drm_fb_helper *fb_helper); void drm_fb_helper_restore(void); void drm_fb_helper_fill_var(struct fb_info *info, struct drm_fb_helper *fb_helper, uint32_t fb_width, uint32_t fb_height); diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h index 3bce1a4fc305..7aa5dddb2098 100644 --- a/include/drm/radeon_drm.h +++ b/include/drm/radeon_drm.h @@ -909,6 +909,7 @@ struct drm_radeon_cs { #define RADEON_INFO_WANT_CMASK 0x08 /* get access to CMASK on r300 */ #define RADEON_INFO_CLOCK_CRYSTAL_FREQ 0x09 /* clock crystal frequency */ #define RADEON_INFO_NUM_BACKENDS 0x0a /* DB/backends for r600+ - need for OQ */ +#define RADEON_INFO_NUM_TILE_PIPES 0x0b /* tile pipes for r600+ */ struct drm_radeon_info { uint32_t request; diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h index df29c8fde36b..8847c8c29791 100644 --- a/include/linux/huge_mm.h +++ b/include/linux/huge_mm.h @@ -117,7 +117,7 @@ static inline void vma_adjust_trans_huge(struct vm_area_struct *vma, unsigned long end, long adjust_next) { - if (!vma->anon_vma || vma->vm_ops || vma->vm_file) + if (!vma->anon_vma || vma->vm_ops) return; __vma_adjust_trans_huge(vma, start, end, adjust_next); } diff --git a/include/linux/mm.h b/include/linux/mm.h index 692dbae6ffa7..2348db26bc3d 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -137,7 +137,8 @@ extern unsigned int kobjsize(const void *objp); #define VM_RandomReadHint(v) ((v)->vm_flags & VM_RAND_READ) /* - * special vmas that are non-mergable, non-mlock()able + * Special vmas that are non-mergable, non-mlock()able. + * Note: mm/huge_memory.c VM_NO_THP depends on this definition. */ #define VM_SPECIAL (VM_IO | VM_DONTEXPAND | VM_RESERVED | VM_PFNMAP) diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index 216cea5db0aa..87694ca86914 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -47,6 +47,7 @@ struct nfs_client { #ifdef CONFIG_NFS_V4 u64 cl_clientid; /* constant */ + nfs4_verifier cl_confirm; /* Clientid verifier */ unsigned long cl_state; spinlock_t cl_lock; diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 78b101e487ea..890dce242639 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -50,6 +50,7 @@ struct nfs_fattr { } du; struct nfs_fsid fsid; __u64 fileid; + __u64 mounted_on_fileid; struct timespec atime; struct timespec mtime; struct timespec ctime; @@ -83,6 +84,7 @@ struct nfs_fattr { #define NFS_ATTR_FATTR_PRECHANGE (1U << 18) #define NFS_ATTR_FATTR_V4_REFERRAL (1U << 19) /* NFSv4 referral */ #define NFS_ATTR_FATTR_MOUNTPOINT (1U << 20) /* Treat as mountpoint */ +#define NFS_ATTR_FATTR_MOUNTED_ON_FILEID (1U << 21) #define NFS_ATTR_FATTR (NFS_ATTR_FATTR_TYPE \ | NFS_ATTR_FATTR_MODE \ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 4e2c9150a785..8abe8d78c4bf 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2477,15 +2477,12 @@ #define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21 #define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30 #define PCI_DEVICE_ID_INTEL_IOAT 0x1a38 -#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN 0x1c41 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX 0x1c5f -#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22 #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0 0x1d40 #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1 0x1d41 #define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN 0x2310 #define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX 0x231f -#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 #define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410 #define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411 #define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413 @@ -2696,7 +2693,6 @@ #define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN 0x3b00 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX 0x3b1f -#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 #define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f #define PCI_DEVICE_ID_INTEL_5100_16 0x65f0 #define PCI_DEVICE_ID_INTEL_5100_21 0x65f5 diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h index d81db8012c63..f73c482ec9c6 100644 --- a/include/linux/sunrpc/sched.h +++ b/include/linux/sunrpc/sched.h @@ -127,13 +127,16 @@ struct rpc_task_setup { #define RPC_TASK_KILLED 0x0100 /* task was killed */ #define RPC_TASK_SOFT 0x0200 /* Use soft timeouts */ #define RPC_TASK_SOFTCONN 0x0400 /* Fail if can't connect */ +#define RPC_TASK_SENT 0x0800 /* message was sent */ +#define RPC_TASK_TIMEOUT 0x1000 /* fail with ETIMEDOUT on timeout */ #define RPC_IS_ASYNC(t) ((t)->tk_flags & RPC_TASK_ASYNC) #define RPC_IS_SWAPPER(t) ((t)->tk_flags & RPC_TASK_SWAPPER) #define RPC_DO_ROOTOVERRIDE(t) ((t)->tk_flags & RPC_TASK_ROOTCREDS) #define RPC_ASSASSINATED(t) ((t)->tk_flags & RPC_TASK_KILLED) -#define RPC_IS_SOFT(t) ((t)->tk_flags & RPC_TASK_SOFT) +#define RPC_IS_SOFT(t) ((t)->tk_flags & (RPC_TASK_SOFT|RPC_TASK_TIMEOUT)) #define RPC_IS_SOFTCONN(t) ((t)->tk_flags & RPC_TASK_SOFTCONN) +#define RPC_WAS_SENT(t) ((t)->tk_flags & RPC_TASK_SENT) #define RPC_TASK_RUNNING 0 #define RPC_TASK_QUEUED 1 diff --git a/include/linux/v4l2-mediabus.h b/include/linux/v4l2-mediabus.h index 7054a7a8065e..de5c15921025 100644 --- a/include/linux/v4l2-mediabus.h +++ b/include/linux/v4l2-mediabus.h @@ -47,7 +47,7 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_RGB565_2X8_BE = 0x1007, V4L2_MBUS_FMT_RGB565_2X8_LE = 0x1008, - /* YUV (including grey) - next is 0x2013 */ + /* YUV (including grey) - next is 0x2014 */ V4L2_MBUS_FMT_Y8_1X8 = 0x2001, V4L2_MBUS_FMT_UYVY8_1_5X8 = 0x2002, V4L2_MBUS_FMT_VYUY8_1_5X8 = 0x2003, @@ -60,6 +60,7 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_Y10_1X10 = 0x200a, V4L2_MBUS_FMT_YUYV10_2X10 = 0x200b, V4L2_MBUS_FMT_YVYU10_2X10 = 0x200c, + V4L2_MBUS_FMT_Y12_1X12 = 0x2013, V4L2_MBUS_FMT_UYVY8_1X16 = 0x200f, V4L2_MBUS_FMT_VYUY8_1X16 = 0x2010, V4L2_MBUS_FMT_YUYV8_1X16 = 0x2011, @@ -67,9 +68,11 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_YUYV10_1X20 = 0x200d, V4L2_MBUS_FMT_YVYU10_1X20 = 0x200e, - /* Bayer - next is 0x3013 */ + /* Bayer - next is 0x3015 */ V4L2_MBUS_FMT_SBGGR8_1X8 = 0x3001, + V4L2_MBUS_FMT_SGBRG8_1X8 = 0x3013, V4L2_MBUS_FMT_SGRBG8_1X8 = 0x3002, + V4L2_MBUS_FMT_SRGGB8_1X8 = 0x3014, V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 = 0x300b, V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 = 0x300c, V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 = 0x3009, diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index aa6c393b7ae9..be82c8ead1af 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -308,6 +308,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_Y4 v4l2_fourcc('Y', '0', '4', ' ') /* 4 Greyscale */ #define V4L2_PIX_FMT_Y6 v4l2_fourcc('Y', '0', '6', ' ') /* 6 Greyscale */ #define V4L2_PIX_FMT_Y10 v4l2_fourcc('Y', '1', '0', ' ') /* 10 Greyscale */ +#define V4L2_PIX_FMT_Y12 v4l2_fourcc('Y', '1', '2', ' ') /* 12 Greyscale */ #define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */ /* Palette formats */ diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h index bd102cf509ac..d61febfb1668 100644 --- a/include/media/v4l2-device.h +++ b/include/media/v4l2-device.h @@ -163,7 +163,7 @@ v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev); ({ \ struct v4l2_subdev *__sd; \ __v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd, cond, o, \ - f, args...); \ + f , ##args); \ }) /* Call the specified callback for all subdevs matching grp_id (if 0, then diff --git a/init/Kconfig b/init/Kconfig index 56240e724d9a..d886b1e9278e 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -924,14 +924,6 @@ menuconfig EXPERT environments which can tolerate a "non-standard" kernel. Only use this if you really know what you are doing. -config EMBEDDED - bool "Embedded system" - select EXPERT - help - This option should be enabled if compiling the kernel for - an embedded system so certain expert options are available - for configuration. - config UID16 bool "Enable 16-bit UID system calls" if EXPERT depends on ARM || BLACKFIN || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && COMPAT) || UML || (X86_64 && IA32_EMULATION) @@ -1104,6 +1096,14 @@ config AIO by some high performance threaded applications. Disabling this option saves about 7k. +config EMBEDDED + bool "Embedded system" + select EXPERT + help + This option should be enabled if compiling the kernel for + an embedded system so certain expert options are available + for configuration. + config HAVE_PERF_EVENTS bool help @@ -1226,6 +1226,7 @@ config SLAB per cpu and per node queues. config SLUB + depends on BROKEN || NUMA || !DISCONTIGMEM bool "SLUB (Unqueued Allocator)" help SLUB is a slab allocator that minimizes cache line usage diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 9017478c5d4c..87fdb3f8db14 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -81,7 +81,11 @@ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) = } }; -static int hrtimer_clock_to_base_table[MAX_CLOCKS]; +static int hrtimer_clock_to_base_table[MAX_CLOCKS] = { + [CLOCK_REALTIME] = HRTIMER_BASE_REALTIME, + [CLOCK_MONOTONIC] = HRTIMER_BASE_MONOTONIC, + [CLOCK_BOOTTIME] = HRTIMER_BASE_BOOTTIME, +}; static inline int hrtimer_clockid_to_base(clockid_t clock_id) { @@ -1722,10 +1726,6 @@ static struct notifier_block __cpuinitdata hrtimers_nb = { void __init hrtimers_init(void) { - hrtimer_clock_to_base_table[CLOCK_REALTIME] = HRTIMER_BASE_REALTIME; - hrtimer_clock_to_base_table[CLOCK_MONOTONIC] = HRTIMER_BASE_MONOTONIC; - hrtimer_clock_to_base_table[CLOCK_BOOTTIME] = HRTIMER_BASE_BOOTTIME; - hrtimer_cpu_notify(&hrtimers_nb, (unsigned long)CPU_UP_PREPARE, (void *)(long)smp_processor_id()); register_cpu_notifier(&hrtimers_nb); diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 61d7d59f4a1a..2ad39e556cb4 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -141,7 +141,7 @@ if FTRACE config FUNCTION_TRACER bool "Kernel Function Tracer" depends on HAVE_FUNCTION_TRACER - select FRAME_POINTER if !ARM_UNWIND && !S390 + select FRAME_POINTER if !ARM_UNWIND && !S390 && !MICROBLAZE select KALLSYMS select GENERIC_TRACER select CONTEXT_SWITCH_TRACER diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 140dce750450..14733d4d156b 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -430,9 +430,12 @@ static int watchdog_enable(int cpu) p = kthread_create(watchdog, (void *)(unsigned long)cpu, "watchdog/%d", cpu); if (IS_ERR(p)) { printk(KERN_ERR "softlockup watchdog for %i failed\n", cpu); - if (!err) + if (!err) { /* if hardlockup hasn't already set this */ err = PTR_ERR(p); + /* and disable the perf event */ + watchdog_nmi_disable(cpu); + } goto out; } kthread_bind(p, cpu); diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 8859a41806dd..e3378e8d3a5c 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -1291,8 +1291,14 @@ __acquires(&gcwq->lock) return true; spin_unlock_irq(&gcwq->lock); - /* CPU has come up in between, retry migration */ + /* + * We've raced with CPU hot[un]plug. Give it a breather + * and retry migration. cond_resched() is required here; + * otherwise, we might deadlock against cpu_stop trying to + * bring down the CPU on non-preemptive kernel. + */ cpu_relax(); + cond_resched(); } } diff --git a/lib/xz/xz_dec_lzma2.c b/lib/xz/xz_dec_lzma2.c index ea5fa4fe9d67..a6cdc969ea42 100644 --- a/lib/xz/xz_dec_lzma2.c +++ b/lib/xz/xz_dec_lzma2.c @@ -969,6 +969,9 @@ XZ_EXTERN enum xz_ret xz_dec_lzma2_run(struct xz_dec_lzma2 *s, */ tmp = b->in[b->in_pos++]; + if (tmp == 0x00) + return XZ_STREAM_END; + if (tmp >= 0xE0 || tmp == 0x01) { s->lzma2.need_props = true; s->lzma2.need_dict_reset = false; @@ -1001,9 +1004,6 @@ XZ_EXTERN enum xz_ret xz_dec_lzma2_run(struct xz_dec_lzma2 *s, lzma_reset(s); } } else { - if (tmp == 0x00) - return XZ_STREAM_END; - if (tmp > 0x02) return XZ_DATA_ERROR; diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 470dcda10add..83326ad66d9b 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -1408,6 +1408,9 @@ out: return ret; } +#define VM_NO_THP (VM_SPECIAL|VM_INSERTPAGE|VM_MIXEDMAP|VM_SAO| \ + VM_HUGETLB|VM_SHARED|VM_MAYSHARE) + int hugepage_madvise(struct vm_area_struct *vma, unsigned long *vm_flags, int advice) { @@ -1416,11 +1419,7 @@ int hugepage_madvise(struct vm_area_struct *vma, /* * Be somewhat over-protective like KSM for now! */ - if (*vm_flags & (VM_HUGEPAGE | - VM_SHARED | VM_MAYSHARE | - VM_PFNMAP | VM_IO | VM_DONTEXPAND | - VM_RESERVED | VM_HUGETLB | VM_INSERTPAGE | - VM_MIXEDMAP | VM_SAO)) + if (*vm_flags & (VM_HUGEPAGE | VM_NO_THP)) return -EINVAL; *vm_flags &= ~VM_NOHUGEPAGE; *vm_flags |= VM_HUGEPAGE; @@ -1436,11 +1435,7 @@ int hugepage_madvise(struct vm_area_struct *vma, /* * Be somewhat over-protective like KSM for now! */ - if (*vm_flags & (VM_NOHUGEPAGE | - VM_SHARED | VM_MAYSHARE | - VM_PFNMAP | VM_IO | VM_DONTEXPAND | - VM_RESERVED | VM_HUGETLB | VM_INSERTPAGE | - VM_MIXEDMAP | VM_SAO)) + if (*vm_flags & (VM_NOHUGEPAGE | VM_NO_THP)) return -EINVAL; *vm_flags &= ~VM_HUGEPAGE; *vm_flags |= VM_NOHUGEPAGE; @@ -1574,10 +1569,14 @@ int khugepaged_enter_vma_merge(struct vm_area_struct *vma) * page fault if needed. */ return 0; - if (vma->vm_file || vma->vm_ops) + if (vma->vm_ops) /* khugepaged not yet working on file or special mappings */ return 0; - VM_BUG_ON(is_linear_pfn_mapping(vma) || is_pfn_mapping(vma)); + /* + * If is_pfn_mapping() is true is_learn_pfn_mapping() must be + * true too, verify it here. + */ + VM_BUG_ON(is_linear_pfn_mapping(vma) || vma->vm_flags & VM_NO_THP); hstart = (vma->vm_start + ~HPAGE_PMD_MASK) & HPAGE_PMD_MASK; hend = vma->vm_end & HPAGE_PMD_MASK; if (hstart < hend) @@ -1828,12 +1827,15 @@ static void collapse_huge_page(struct mm_struct *mm, (vma->vm_flags & VM_NOHUGEPAGE)) goto out; - /* VM_PFNMAP vmas may have vm_ops null but vm_file set */ - if (!vma->anon_vma || vma->vm_ops || vma->vm_file) + if (!vma->anon_vma || vma->vm_ops) goto out; if (is_vma_temporary_stack(vma)) goto out; - VM_BUG_ON(is_linear_pfn_mapping(vma) || is_pfn_mapping(vma)); + /* + * If is_pfn_mapping() is true is_learn_pfn_mapping() must be + * true too, verify it here. + */ + VM_BUG_ON(is_linear_pfn_mapping(vma) || vma->vm_flags & VM_NO_THP); pgd = pgd_offset(mm, address); if (!pgd_present(*pgd)) @@ -2066,13 +2068,16 @@ static unsigned int khugepaged_scan_mm_slot(unsigned int pages, progress++; continue; } - /* VM_PFNMAP vmas may have vm_ops null but vm_file set */ - if (!vma->anon_vma || vma->vm_ops || vma->vm_file) + if (!vma->anon_vma || vma->vm_ops) goto skip; if (is_vma_temporary_stack(vma)) goto skip; - - VM_BUG_ON(is_linear_pfn_mapping(vma) || is_pfn_mapping(vma)); + /* + * If is_pfn_mapping() is true is_learn_pfn_mapping() + * must be true too, verify it here. + */ + VM_BUG_ON(is_linear_pfn_mapping(vma) || + vma->vm_flags & VM_NO_THP); hstart = (vma->vm_start + ~HPAGE_PMD_MASK) & HPAGE_PMD_MASK; hend = vma->vm_end & HPAGE_PMD_MASK; diff --git a/mm/memory.c b/mm/memory.c index ce22a250926f..607098d47e74 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -3396,7 +3396,7 @@ int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma, * run pte_offset_map on the pmd, if an huge pmd could * materialize from under us from a different thread. */ - if (unlikely(__pte_alloc(mm, vma, pmd, address))) + if (unlikely(pmd_none(*pmd)) && __pte_alloc(mm, vma, pmd, address)) return VM_FAULT_OOM; /* if an huge pmd materialized from under us just retry later */ if (unlikely(pmd_trans_huge(*pmd))) diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 83fb72c108b7..f52e85c80e8d 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -172,10 +172,13 @@ unsigned int oom_badness(struct task_struct *p, struct mem_cgroup *mem, /* * The baseline for the badness score is the proportion of RAM that each - * task's rss and swap space use. + * task's rss, pagetable and swap space use. */ - points = (get_mm_rss(p->mm) + get_mm_counter(p->mm, MM_SWAPENTS)) * 1000 / - totalpages; + points = get_mm_rss(p->mm) + p->mm->nr_ptes; + points += get_mm_counter(p->mm, MM_SWAPENTS); + + points *= 1000; + points /= totalpages; task_unlock(p); /* diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c index fce9bd3bd3fe..5c04f3e42704 100644 --- a/net/l2tp/l2tp_ip.c +++ b/net/l2tp/l2tp_ip.c @@ -667,7 +667,7 @@ MODULE_AUTHOR("James Chapman "); MODULE_DESCRIPTION("L2TP over IP"); MODULE_VERSION("1.0"); -/* Use the value of SOCK_DGRAM (2) directory, because __stringify does't like +/* Use the value of SOCK_DGRAM (2) directory, because __stringify doesn't like * enums */ MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET, 2, IPPROTO_L2TP); diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c index dff27d5e22fd..61b1f5ada96a 100644 --- a/net/sctp/ulpevent.c +++ b/net/sctp/ulpevent.c @@ -554,7 +554,7 @@ struct sctp_ulpevent *sctp_ulpevent_make_send_failed( memcpy(&ssf->ssf_info, &chunk->sinfo, sizeof(struct sctp_sndrcvinfo)); /* Per TSVWG discussion with Randy. Allow the application to - * resemble a fragmented message. + * reassemble a fragmented message. */ ssf->ssf_info.sinfo_flags = chunk->chunk_hdr->flags; diff --git a/net/sunrpc/Kconfig b/net/sunrpc/Kconfig index 8873fd8ddacd..b2198e65d8bb 100644 --- a/net/sunrpc/Kconfig +++ b/net/sunrpc/Kconfig @@ -18,14 +18,13 @@ config SUNRPC_XPRT_RDMA If unsure, say N. config RPCSEC_GSS_KRB5 - tristate + tristate "Secure RPC: Kerberos V mechanism" depends on SUNRPC && CRYPTO - prompt "Secure RPC: Kerberos V mechanism" if !(NFS_V4 || NFSD_V4) + depends on CRYPTO_MD5 && CRYPTO_DES && CRYPTO_CBC && CRYPTO_CTS + depends on CRYPTO_ECB && CRYPTO_HMAC && CRYPTO_SHA1 && CRYPTO_AES + depends on CRYPTO_ARC4 default y select SUNRPC_GSS - select CRYPTO_MD5 - select CRYPTO_DES - select CRYPTO_CBC help Choose Y here to enable Secure RPC using the Kerberos version 5 GSS-API mechanism (RFC 1964). diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index f3914d0c5079..339ba64cce1e 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -520,7 +520,7 @@ gss_refresh_upcall(struct rpc_task *task) warn_gssd(); task->tk_timeout = 15*HZ; rpc_sleep_on(&pipe_version_rpc_waitqueue, task, NULL); - return 0; + return -EAGAIN; } if (IS_ERR(gss_msg)) { err = PTR_ERR(gss_msg); @@ -563,10 +563,12 @@ retry: if (PTR_ERR(gss_msg) == -EAGAIN) { err = wait_event_interruptible_timeout(pipe_version_waitqueue, pipe_version >= 0, 15*HZ); + if (pipe_version < 0) { + warn_gssd(); + err = -EACCES; + } if (err) goto out; - if (pipe_version < 0) - warn_gssd(); goto retry; } if (IS_ERR(gss_msg)) { diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index e7a96e478f63..8d83f9d48713 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -1508,7 +1508,10 @@ call_timeout(struct rpc_task *task) if (clnt->cl_chatty) printk(KERN_NOTICE "%s: server %s not responding, timed out\n", clnt->cl_protname, clnt->cl_server); - rpc_exit(task, -EIO); + if (task->tk_flags & RPC_TASK_TIMEOUT) + rpc_exit(task, -ETIMEDOUT); + else + rpc_exit(task, -EIO); return; } diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 9494c3767356..ce5eb68a9664 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -906,6 +906,7 @@ void xprt_transmit(struct rpc_task *task) } dprintk("RPC: %5u xmit complete\n", task->tk_pid); + task->tk_flags |= RPC_TASK_SENT; spin_lock_bh(&xprt->transport_lock); xprt->ops->set_retrans_timeout(task); diff --git a/sound/aoa/codecs/tas.c b/sound/aoa/codecs/tas.c index 58804c7acfcf..fd2188c3df2b 100644 --- a/sound/aoa/codecs/tas.c +++ b/sound/aoa/codecs/tas.c @@ -170,7 +170,7 @@ static void tas_set_volume(struct tas *tas) /* analysing the volume and mixer tables shows * that they are similar enough when we shift * the mixer table down by 4 bits. The error - * is minuscule, in just one item the error + * is miniscule, in just one item the error * is 1, at a value of 0x07f17b (mixer table * value is 0x07f17a) */ tmp = tas_gaintable[left]; diff --git a/sound/pci/au88x0/au88x0_pcm.c b/sound/pci/au88x0/au88x0_pcm.c index 33f0ba5559a7..62e959120c44 100644 --- a/sound/pci/au88x0/au88x0_pcm.c +++ b/sound/pci/au88x0/au88x0_pcm.c @@ -44,10 +44,10 @@ static struct snd_pcm_hardware snd_vortex_playback_hw_adb = { .channels_min = 1, .channels_max = 2, .buffer_bytes_max = 0x10000, - .period_bytes_min = 0x1, + .period_bytes_min = 0x20, .period_bytes_max = 0x1000, .periods_min = 2, - .periods_max = 32, + .periods_max = 1024, }; #ifndef CHIP_AU8820 @@ -140,6 +140,9 @@ static int snd_vortex_pcm_open(struct snd_pcm_substream *substream) SNDRV_PCM_HW_PARAM_PERIOD_BYTES)) < 0) return err; + snd_pcm_hw_constraint_step(runtime, 0, + SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 64); + if (VORTEX_PCM_TYPE(substream->pcm) != VORTEX_PCM_WT) { #ifndef CHIP_AU8820 if (VORTEX_PCM_TYPE(substream->pcm) == VORTEX_PCM_A3D) { diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d3bd2c10180f..c82979a8cd09 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -1704,11 +1704,11 @@ static void alc_apply_fixup(struct hda_codec *codec, int action) codec->chip_name, fix->type); break; } - if (!fix[id].chained) + if (!fix->chained) break; if (++depth > 10) break; - id = fix[id].chain_id; + id = fix->chain_id; } } @@ -5645,6 +5645,7 @@ static void fillup_priv_adc_nids(struct hda_codec *codec, hda_nid_t *nids, static struct snd_pci_quirk beep_white_list[] = { SND_PCI_QUIRK(0x1043, 0x829f, "ASUS", 1), SND_PCI_QUIRK(0x1043, 0x83ce, "EeePC", 1), + SND_PCI_QUIRK(0x1043, 0x831a, "EeePC", 1), SND_PCI_QUIRK(0x8086, 0xd613, "Intel", 1), {} }; @@ -9863,6 +9864,7 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = { SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD), SND_PCI_QUIRK(0x10f1, 0x2350, "TYAN-S2350", ALC888_6ST_DELL), SND_PCI_QUIRK(0x108e, 0x534d, NULL, ALC883_3ST_6ch), + SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG), SND_PCI_QUIRK(0x1462, 0x0349, "MSI", ALC883_TARGA_2ch_DIG), SND_PCI_QUIRK(0x1462, 0x040d, "MSI", ALC883_TARGA_2ch_DIG), @@ -10699,7 +10701,6 @@ enum { PINFIX_LENOVO_Y530, PINFIX_PB_M5210, PINFIX_ACER_ASPIRE_7736, - PINFIX_GIGABYTE_880GM, }; static const struct alc_fixup alc882_fixups[] = { @@ -10731,13 +10732,6 @@ static const struct alc_fixup alc882_fixups[] = { .type = ALC_FIXUP_SKU, .v.sku = ALC_FIXUP_SKU_IGNORE, }, - [PINFIX_GIGABYTE_880GM] = { - .type = ALC_FIXUP_PINS, - .v.pins = (const struct alc_pincfg[]) { - { 0x14, 0x1114410 }, /* set as speaker */ - { } - } - }, }; static struct snd_pci_quirk alc882_fixup_tbl[] = { @@ -10745,7 +10739,6 @@ static struct snd_pci_quirk alc882_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Y530", PINFIX_LENOVO_Y530), SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX), SND_PCI_QUIRK(0x1025, 0x0296, "Acer Aspire 7736z", PINFIX_ACER_ASPIRE_7736), - SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte", PINFIX_GIGABYTE_880GM), {} }; @@ -18805,6 +18798,8 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = { ALC662_3ST_6ch_DIG), SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB20x", ALC662_AUTO), SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10), + SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L", + ALC662_3ST_6ch_DIG), SND_PCI_QUIRK(0x152d, 0x2304, "Quanta WH1", ALC663_ASUS_H13), SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG), SND_PCI_QUIRK(0x1631, 0xc10c, "PB RS65", ALC663_ASUS_M51VA), @@ -19478,7 +19473,7 @@ enum { ALC662_FIXUP_IDEAPAD, ALC272_FIXUP_MARIO, ALC662_FIXUP_CZC_P10T, - ALC662_FIXUP_GIGABYTE, + ALC662_FIXUP_SKU_IGNORE, }; static const struct alc_fixup alc662_fixups[] = { @@ -19507,20 +19502,17 @@ static const struct alc_fixup alc662_fixups[] = { {} } }, - [ALC662_FIXUP_GIGABYTE] = { - .type = ALC_FIXUP_PINS, - .v.pins = (const struct alc_pincfg[]) { - { 0x14, 0x1114410 }, /* set as speaker */ - { } - } + [ALC662_FIXUP_SKU_IGNORE] = { + .type = ALC_FIXUP_SKU, + .v.sku = ALC_FIXUP_SKU_IGNORE, }, }; static struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x1025, 0x0308, "Acer Aspire 8942G", ALC662_FIXUP_ASPIRE), + SND_PCI_QUIRK(0x1025, 0x031c, "Gateway NV79", ALC662_FIXUP_SKU_IGNORE), SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE), SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD), - SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte", ALC662_FIXUP_GIGABYTE), SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD), SND_PCI_QUIRK(0x1b35, 0x2206, "CZC P10T", ALC662_FIXUP_CZC_P10T), diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index 1371b57c11e8..0997031c48d2 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -1292,14 +1292,18 @@ static void notify_aa_path_ctls(struct hda_codec *codec) { int i; struct snd_ctl_elem_id id; - const char *labels[] = {"Mic", "Front Mic", "Line"}; + const char *labels[] = {"Mic", "Front Mic", "Line", "Rear Mic"}; + struct snd_kcontrol *ctl; memset(&id, 0, sizeof(id)); id.iface = SNDRV_CTL_ELEM_IFACE_MIXER; for (i = 0; i < ARRAY_SIZE(labels); i++) { sprintf(id.name, "%s Playback Volume", labels[i]); - snd_ctl_notify(codec->bus->card, SNDRV_CTL_EVENT_MASK_VALUE, - &id); + ctl = snd_hda_find_mixer_ctl(codec, id.name); + if (ctl) + snd_ctl_notify(codec->bus->card, + SNDRV_CTL_EVENT_MASK_VALUE, + &ctl->id); } } diff --git a/sound/usb/format.c b/sound/usb/format.c index 5b792d2c8061..f079b5e2ab28 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -176,9 +176,11 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof if (!rate) continue; /* C-Media CM6501 mislabels its 96 kHz altsetting */ + /* Terratec Aureon 7.1 USB C-Media 6206, too */ if (rate == 48000 && nr_rates == 1 && (chip->usb_id == USB_ID(0x0d8c, 0x0201) || - chip->usb_id == USB_ID(0x0d8c, 0x0102)) && + chip->usb_id == USB_ID(0x0d8c, 0x0102) || + chip->usb_id == USB_ID(0x0ccd, 0x00b1)) && fp->altsetting == 5 && fp->maxpacksize == 392) rate = 96000; /* Creative VF0470 Live Cam reports 16 kHz instead of 8kHz */ diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index ec07e62e53f3..1b94ec3a3368 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -533,6 +533,7 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, case USB_ID(0x0d8c, 0x0102): /* C-Media CM6206 / CM106-Like Sound Device */ + case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */ return snd_usb_cm6206_boot_quirk(dev); case USB_ID(0x133e, 0x0815):