mmc: sdhci: move setting host->clock into sdhci_do_set_ios()

We don't need implementations to do this, since the only time it's
necessary is when we change the clock, and the only place that happens
is in sdhci_do_set_ios().  So, move it there, and remove it from the
iMX platform backend.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>

drivers/mmc/host/sdhci-cns3xxx.c

@@ -33,7 +33,7 @@ static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock)
 	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
 
 	if (clock == 0)
-		goto out;
+		return;
 
 	while (host->max_clk / div > clock) {
 		/*
@@ -72,8 +72,6 @@ static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock)
 
 	clk |= SDHCI_CLOCK_CARD_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
-out:
-	host->clock = clock;
 }
 
 static const struct sdhci_ops sdhci_cns3xxx_ops = {

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -605,7 +605,7 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
 			writel(val & ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON,
 					host->ioaddr + ESDHC_VENDOR_SPEC);
 		}
-		goto out;
+		return;
 	}
 
 	if (esdhc_is_usdhc(imx_data) && !imx_data->is_ddr)
@@ -645,8 +645,6 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
 	}
 
 	mdelay(1);
-out:
-	host->clock = clock;
 }
 
 static unsigned int esdhc_pltfm_get_ro(struct sdhci_host *host)

drivers/mmc/host/sdhci-of-esdhc.c

@@ -205,7 +205,7 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 	u32 temp;
 
 	if (clock == 0)
-		goto out;
+		return;
 
 	/* Workaround to reduce the clock frequency for p1010 esdhc */
 	if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
@@ -238,8 +238,6 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 		| (pre_div << ESDHC_PREDIV_SHIFT));
 	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
 	mdelay(1);
-out:
-	host->clock = clock;
 }
 
 #ifdef CONFIG_PM

drivers/mmc/host/sdhci-s3c.c

@@ -295,7 +295,6 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
 	/* If the clock is going off, set to 0 at clock control register */
 	if (clock == 0) {
 		sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
-		host->clock = clock;
 		return;
 	}
 
@@ -303,8 +302,6 @@ static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
 
 	clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
 
-	host->clock = clock;
-
 	clk = SDHCI_CLOCK_INT_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 

drivers/mmc/host/sdhci.c

@@ -1130,7 +1130,7 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
 
 	if (clock == 0)
-		goto out;
+		return;
 
 	if (host->version >= SDHCI_SPEC_300) {
 		if (sdhci_readw(host, SDHCI_HOST_CONTROL2) &
@@ -1220,9 +1220,6 @@ clock_set:
 
 	clk |= SDHCI_CLOCK_CARD_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
-
-out:
-	host->clock = clock;
 }
 
 static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
@@ -1441,8 +1438,10 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 		!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN))
 		sdhci_enable_preset_value(host, false);
 
-	if (!ios->clock || ios->clock != host->clock)
+	if (!ios->clock || ios->clock != host->clock) {
 		sdhci_set_clock(host, ios->clock);
+		host->clock = ios->clock;
+	}
 
 	if (ios->power_mode == MMC_POWER_OFF)
 		vdd_bit = sdhci_set_power(host, -1);