diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index b4f0e37b83eb..74403e80221c 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -54,15 +54,6 @@ config SUPERH select HAVE_NMI select NEED_SG_DMA_LENGTH select ARCH_HAS_GIGANTIC_PAGE - - help - The SuperH is a RISC processor targeted for use in embedded systems - and consumer electronics; it was also used in the Sega Dreamcast - gaming console. The SuperH port has a home page at - . - -config SUPERH32 - def_bool "$(ARCH)" = "sh" select ARCH_32BIT_OFF_T select GUP_GET_PTE_LOW_HIGH if X2TLB select HAVE_KPROBES @@ -81,19 +72,15 @@ config SUPERH32 select ARCH_HIBERNATION_POSSIBLE if MMU select SPARSE_IRQ select HAVE_STACKPROTECTOR - -config SUPERH64 - def_bool "$(ARCH)" = "sh64" - select HAVE_EXIT_THREAD - select KALLSYMS + help + The SuperH is a RISC processor targeted for use in embedded systems + and consumer electronics; it was also used in the Sega Dreamcast + gaming console. The SuperH port has a home page at + . config GENERIC_BUG def_bool y - depends on BUG && SUPERH32 - -config GENERIC_CSUM - def_bool y - depends on SUPERH64 + depends on BUG config GENERIC_HWEIGHT def_bool y @@ -203,12 +190,6 @@ config CPU_SH4AL_DSP select CPU_SH4A select CPU_HAS_DSP -config CPU_SH5 - bool - select CPU_HAS_FPU - select SYS_SUPPORTS_SH_TMU - select SYS_SUPPORTS_HUGETLBFS if MMU - config CPU_SHX2 bool @@ -228,8 +209,6 @@ config CPU_HAS_PMU default y bool -if SUPERH32 - choice prompt "Processor sub-type selection" @@ -518,27 +497,6 @@ config CPU_SUBTYPE_SH7366 endchoice -endif - -if SUPERH64 - -choice - prompt "Processor sub-type selection" - -# SH-5 Processor Support - -config CPU_SUBTYPE_SH5_101 - bool "Support SH5-101 processor" - select CPU_SH5 - -config CPU_SUBTYPE_SH5_103 - bool "Support SH5-103 processor" - select CPU_SH5 - -endchoice - -endif - source "arch/sh/mm/Kconfig" source "arch/sh/Kconfig.cpu" @@ -592,7 +550,7 @@ source "kernel/Kconfig.hz" config KEXEC bool "kexec system call (EXPERIMENTAL)" - depends on SUPERH32 && MMU + depends on MMU select KEXEC_CORE help kexec is a system call that implements the ability to shutdown your @@ -610,7 +568,7 @@ config KEXEC config CRASH_DUMP bool "kernel crash dumps (EXPERIMENTAL)" - depends on SUPERH32 && BROKEN_ON_SMP + depends on BROKEN_ON_SMP help Generate crash dump after being started by kexec. This should be normally only set in special crash dump kernels @@ -624,7 +582,7 @@ config CRASH_DUMP config KEXEC_JUMP bool "kexec jump (EXPERIMENTAL)" - depends on SUPERH32 && KEXEC && HIBERNATION + depends on KEXEC && HIBERNATION help Jump between original kernel and kexeced kernel and invoke code via KEXEC @@ -701,7 +659,7 @@ config HOTPLUG_CPU config GUSA def_bool y - depends on !SMP && SUPERH32 + depends on !SMP help This enables support for gUSA (general UserSpace Atomicity). This is the default implementation for both UP and non-ll/sc diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu index 4a4edc7e03d4..97ca35f2cd37 100644 --- a/arch/sh/Kconfig.cpu +++ b/arch/sh/Kconfig.cpu @@ -13,7 +13,6 @@ config CPU_LITTLE_ENDIAN config CPU_BIG_ENDIAN bool "Big Endian" - depends on !CPU_SH5 endchoice @@ -27,10 +26,6 @@ config SH_FPU This option must be set in order to enable the FPU. -config SH64_FPU_DENORM_FLUSH - bool "Flush floating point denorms to zero" - depends on SH_FPU && SUPERH64 - config SH_FPU_EMU def_bool n prompt "FPU emulation support" @@ -77,10 +72,6 @@ config SPECULATIVE_EXECUTION If unsure, say N. -config SH64_ID2815_WORKAROUND - bool "Include workaround for SH5-101 cut2 silicon defect ID2815" - depends on CPU_SUBTYPE_SH5_101 - config CPU_HAS_INTEVT bool diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 010b6c33bbba..28a43d63bde1 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -5,7 +5,6 @@ config TRACE_IRQFLAGS_SUPPORT config SH_STANDARD_BIOS bool "Use LinuxSH standard BIOS" - depends on SUPERH32 help Say Y here if your target has the gdb-sh-stub package from www.m17n.org (or any conforming standard LinuxSH BIOS) @@ -19,7 +18,7 @@ config SH_STANDARD_BIOS config STACK_DEBUG bool "Check for stack overflows" - depends on DEBUG_KERNEL && SUPERH32 + depends on DEBUG_KERNEL help This option will cause messages to be printed if free stack space drops below a certain limit. Saying Y here will add overhead to @@ -38,7 +37,7 @@ config 4KSTACKS config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" - depends on DEBUG_KERNEL && SUPERH32 && BROKEN + depends on DEBUG_KERNEL && BROKEN help If you say Y here the kernel will use separate kernel stacks for handling hard and soft interrupts. This can help avoid @@ -46,7 +45,7 @@ config IRQSTACKS config DUMP_CODE bool "Show disassembly of nearby code in register dumps" - depends on DEBUG_KERNEL && SUPERH32 + depends on DEBUG_KERNEL default y if DEBUG_BUGVERBOSE default n help @@ -59,7 +58,6 @@ config DUMP_CODE config DWARF_UNWINDER bool "Enable the DWARF unwinder for stacktraces" select FRAME_POINTER - depends on SUPERH32 default n help Enabling this option will make stacktraces more accurate, at @@ -77,11 +75,6 @@ config SH_NO_BSS_INIT For all other cases, say N. If this option seems perplexing, or you aren't sure, say N. -config SH64_SR_WATCH - bool "Debug: set SR.WATCH to enable hardware watchpoints and trace" - depends on SUPERH64 - config MCOUNT def_bool y - depends on SUPERH32 depends on STACK_DEBUG || FUNCTION_TRACER diff --git a/arch/sh/Makefile b/arch/sh/Makefile index b4a86f27e048..da9cf952f33c 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -11,7 +11,7 @@ # ifneq ($(SUBARCH),$(ARCH)) ifeq ($(CROSS_COMPILE),) - CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux- $(UTS_MACHINE)-linux-gnu- $(UTS_MACHINE)-unknown-linux-gnu-) + CROSS_COMPILE := $(call cc-cross-prefix, sh-linux- sh-linux-gnu- sh-unknown-linux-gnu-) endif endif @@ -29,12 +29,9 @@ isa-$(CONFIG_CPU_SH3) := sh3 isa-$(CONFIG_CPU_SH4) := sh4 isa-$(CONFIG_CPU_SH4A) := sh4a isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al -isa-$(CONFIG_CPU_SH5) := shmedia -ifeq ($(CONFIG_SUPERH32),y) isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp isa-y := $(isa-y)-up -endif cflags-$(CONFIG_CPU_SH2) := $(call cc-option,-m2,) cflags-$(CONFIG_CPU_J2) += $(call cc-option,-mj2,) @@ -47,7 +44,6 @@ cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \ cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a,) \ $(call cc-option,-m4a-nofpu,) cflags-$(CONFIG_CPU_SH4AL_DSP) += $(call cc-option,-m4al,) -cflags-$(CONFIG_CPU_SH5) := $(call cc-option,-m5-32media-nofpu,) ifeq ($(cflags-y),) # @@ -88,7 +84,7 @@ OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \ -R .stab -R .stabstr -S # Give the various platforms the opportunity to set default image types -defaultimage-$(CONFIG_SUPERH32) := zImage +defaultimage-y := zImage defaultimage-$(CONFIG_SH_SH7785LCR) := uImage defaultimage-$(CONFIG_SH_RSK) := uImage defaultimage-$(CONFIG_SH_URQUELL) := uImage @@ -107,31 +103,22 @@ KBUILD_IMAGE := $(boot)/$(defaultimage-y) # Choosing incompatible machines durings configuration will result in # error messages during linking. # -ifdef CONFIG_SUPERH32 UTS_MACHINE := sh -BITS := 32 LDFLAGS_vmlinux += -e _stext -else -UTS_MACHINE := sh64 -BITS := 64 -LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \ - --defsym phys_stext_shmedia=phys_stext+1 \ - -e phys_stext_shmedia -endif ifdef CONFIG_CPU_LITTLE_ENDIAN -ld-bfd := elf32-$(UTS_MACHINE)-linux +ld-bfd := elf32-sh-linux LDFLAGS_vmlinux += --defsym jiffies=jiffies_64 --oformat $(ld-bfd) KBUILD_LDFLAGS += -EL else -ld-bfd := elf32-$(UTS_MACHINE)big-linux +ld-bfd := elf32-shbig-linux LDFLAGS_vmlinux += --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd) KBUILD_LDFLAGS += -EB endif -export ld-bfd BITS +export ld-bfd -head-y := arch/sh/kernel/head_$(BITS).o +head-y := arch/sh/kernel/head_32.o core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ @@ -185,7 +172,6 @@ cpuincdir-$(CONFIG_CPU_SH2) += cpu-sh2 cpuincdir-$(CONFIG_CPU_SH3) += cpu-sh3 cpuincdir-$(CONFIG_CPU_SH4A) += cpu-sh4a cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4 -cpuincdir-$(CONFIG_CPU_SH5) += cpu-sh5 cpuincdir-y += cpu-common # Must be last drivers-y += arch/sh/drivers/ @@ -206,8 +192,7 @@ ifeq ($(CONFIG_DWARF_UNWINDER),y) KBUILD_CFLAGS += -fasynchronous-unwind-tables endif -libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) -libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) +libs-y := arch/sh/lib/ $(libs-y) BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.xz uImage.lzo \ uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \ diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile index f5e1bd779789..ad0e2403e56f 100644 --- a/arch/sh/boot/compressed/Makefile +++ b/arch/sh/boot/compressed/Makefile @@ -8,9 +8,9 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz \ vmlinux.bin.bz2 vmlinux.bin.lzma \ vmlinux.bin.xz vmlinux.bin.lzo \ - head_$(BITS).o misc.o piggy.o + head_32.o misc.o piggy.o -OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o +OBJECTS = $(obj)/head_32.o $(obj)/misc.o $(obj)/cache.o GCOV_PROFILE := n @@ -39,15 +39,11 @@ LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \ # # Pull in the necessary libgcc bits from the in-kernel implementation. # -lib1funcs-$(CONFIG_SUPERH32) := ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S \ - lshrsi3.S -lib1funcs-obj := \ +lib1funcs-y := ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S lshrsi3.S +lib1funcs-obj := \ $(addsuffix .o, $(basename $(addprefix $(obj)/, $(lib1funcs-y)))) lib1funcs-dir := $(srctree)/arch/$(SRCARCH)/lib -ifeq ($(BITS),64) - lib1funcs-dir := $(addsuffix $(BITS), $(lib1funcs-dir)) -endif KBUILD_CFLAGS += -I$(lib1funcs-dir) -DDISABLE_BRANCH_PROFILING diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c index e69ec12cbbe6..a03b6680a9d9 100644 --- a/arch/sh/boot/compressed/misc.c +++ b/arch/sh/boot/compressed/misc.c @@ -116,11 +116,7 @@ void ftrace_stub(void) { } -#ifdef CONFIG_SUPERH64 -#define stackalign 8 -#else #define stackalign 4 -#endif #define STACK_SIZE (4096) long __attribute__ ((aligned(stackalign))) user_stack[STACK_SIZE]; @@ -130,13 +126,9 @@ void decompress_kernel(void) { unsigned long output_addr; -#ifdef CONFIG_SUPERH64 - output_addr = (CONFIG_MEMORY_START + 0x2000); -#else output_addr = __pa((unsigned long)&_text+PAGE_SIZE); #if defined(CONFIG_29BIT) output_addr |= P2SEG; -#endif #endif output = (unsigned char *)output_addr; diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 947bfe8bb0a7..a5c1e9066f83 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -10,7 +10,6 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7786) += pcie-sh7786.o ops-sh7786.o -obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ pci-dreamcast.o diff --git a/arch/sh/drivers/pci/ops-sh5.c b/arch/sh/drivers/pci/ops-sh5.c deleted file mode 100644 index 9fbaf72949ab..000000000000 --- a/arch/sh/drivers/pci/ops-sh5.c +++ /dev/null @@ -1,65 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Support functions for the SH5 PCI hardware. - * - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * Copyright (C) 2003, 2004 Paul Mundt - * Copyright (C) 2004 Richard Curnow - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "pci-sh5.h" - -static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *val) -{ - SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); - - switch (size) { - case 1: - *val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3)); - break; - case 2: - *val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2)); - break; - case 4: - *val = SH5PCI_READ(PDR); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) -{ - SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); - - switch (size) { - case 1: - SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val); - break; - case 2: - SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val); - break; - case 4: - SH5PCI_WRITE(PDR, val); - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops sh5_pci_ops = { - .read = sh5pci_read, - .write = sh5pci_write, -}; diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c deleted file mode 100644 index 03225d27770b..000000000000 --- a/arch/sh/drivers/pci/pci-sh5.c +++ /dev/null @@ -1,217 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * Copyright (C) 2003, 2004 Paul Mundt - * Copyright (C) 2004 Richard Curnow - * - * Support functions for the SH5 PCI hardware. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "pci-sh5.h" - -unsigned long pcicr_virt; -unsigned long PCI_IO_AREA; - -/* Rounds a number UP to the nearest power of two. Used for - * sizing the PCI window. - */ -static u32 __init r2p2(u32 num) -{ - int i = 31; - u32 tmp = num; - - if (num == 0) - return 0; - - do { - if (tmp & (1 << 31)) - break; - i--; - tmp <<= 1; - } while (i >= 0); - - tmp = 1 << i; - /* If the original number isn't a power of 2, round it up */ - if (tmp != num) - tmp <<= 1; - - return tmp; -} - -static irqreturn_t pcish5_err_irq(int irq, void *dev_id) -{ - struct pt_regs *regs = get_irq_regs(); - unsigned pci_int, pci_air, pci_cir, pci_aint; - - pci_int = SH5PCI_READ(INT); - pci_cir = SH5PCI_READ(CIR); - pci_air = SH5PCI_READ(AIR); - - if (pci_int) { - printk("PCI INTERRUPT (at %08llx)!\n", regs->pc); - printk("PCI INT -> 0x%x\n", pci_int & 0xffff); - printk("PCI AIR -> 0x%x\n", pci_air); - printk("PCI CIR -> 0x%x\n", pci_cir); - SH5PCI_WRITE(INT, ~0); - } - - pci_aint = SH5PCI_READ(AINT); - if (pci_aint) { - printk("PCI ARB INTERRUPT!\n"); - printk("PCI AINT -> 0x%x\n", pci_aint); - printk("PCI AIR -> 0x%x\n", pci_air); - printk("PCI CIR -> 0x%x\n", pci_cir); - SH5PCI_WRITE(AINT, ~0); - } - - return IRQ_HANDLED; -} - -static irqreturn_t pcish5_serr_irq(int irq, void *dev_id) -{ - printk("SERR IRQ\n"); - - return IRQ_NONE; -} - -static struct resource sh5_pci_resources[2]; - -static struct pci_channel sh5pci_controller = { - .pci_ops = &sh5_pci_ops, - .resources = sh5_pci_resources, - .nr_resources = ARRAY_SIZE(sh5_pci_resources), - .mem_offset = 0x00000000, - .io_offset = 0x00000000, -}; - -static int __init sh5pci_init(void) -{ - unsigned long memStart = __pa(memory_start); - unsigned long memSize = __pa(memory_end) - memStart; - u32 lsr0; - u32 uval; - - if (request_irq(IRQ_ERR, pcish5_err_irq, - 0, "PCI Error",NULL) < 0) { - printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n"); - return -EINVAL; - } - - if (request_irq(IRQ_SERR, pcish5_serr_irq, - 0, "PCI SERR interrupt", NULL) < 0) { - printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n"); - return -EINVAL; - } - - pcicr_virt = (unsigned long)ioremap(SH5PCI_ICR_BASE, 1024); - if (!pcicr_virt) { - panic("Unable to remap PCICR\n"); - } - - PCI_IO_AREA = (unsigned long)ioremap(SH5PCI_IO_BASE, 0x10000); - if (!PCI_IO_AREA) { - panic("Unable to remap PCIIO\n"); - } - - /* Clear snoop registers */ - SH5PCI_WRITE(CSCR0, 0); - SH5PCI_WRITE(CSCR1, 0); - - /* Switch off interrupts */ - SH5PCI_WRITE(INTM, 0); - SH5PCI_WRITE(AINTM, 0); - SH5PCI_WRITE(PINTM, 0); - - /* Set bus active, take it out of reset */ - uval = SH5PCI_READ(CR); - - /* Set command Register */ - SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE | - CR_PFCS | CR_BMAM); - - uval=SH5PCI_READ(CR); - - /* Allow it to be a master */ - /* NB - WE DISABLE I/O ACCESS to stop overlap */ - /* set WAIT bit to enable stepping, an attempt to improve stability */ - SH5PCI_WRITE_SHORT(CSR_CMD, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | - PCI_COMMAND_WAIT); - - /* - ** Set translation mapping memory in order to convert the address - ** used for the main bus, to the PCI internal address. - */ - SH5PCI_WRITE(MBR,0x40000000); - - /* Always set the max size 512M */ - SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024)); - - /* - ** I/O addresses are mapped at internal PCI specific address - ** as is described into the configuration bridge table. - ** These are changed to 0, to allow cards that have legacy - ** io such as vga to function correctly. We set the SH5 IOBAR to - ** 256K, which is a bit big as we can only have 64K of address space - */ - - SH5PCI_WRITE(IOBR,0x0); - - /* Set up a 256K window. Totally pointless waste of address space */ - SH5PCI_WRITE(IOBMR,0); - - /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec. - * Ideally, we would want to map the I/O region somewhere, but it - * is so big this is not that easy! - */ - SH5PCI_WRITE(CSR_IBAR0,~0); - /* Set memory size value */ - memSize = memory_end - memory_start; - - /* Now we set up the mbars so the PCI bus can see the memory of - * the machine */ - if (memSize < (1024 * 1024)) { - printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%lx?\n", - memSize); - return -EINVAL; - } - - /* Set LSR 0 */ - lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 : - ((r2p2(memSize) - 0x100000) | 0x1); - SH5PCI_WRITE(LSR0, lsr0); - - /* Set MBAR 0 */ - SH5PCI_WRITE(CSR_MBAR0, memory_start); - SH5PCI_WRITE(LAR0, memory_start); - - SH5PCI_WRITE(CSR_MBAR1,0); - SH5PCI_WRITE(LAR1,0); - SH5PCI_WRITE(LSR1,0); - - /* Enable the PCI interrupts on the device */ - SH5PCI_WRITE(INTM, ~0); - SH5PCI_WRITE(AINTM, ~0); - SH5PCI_WRITE(PINTM, ~0); - - sh5_pci_resources[0].start = PCI_IO_AREA; - sh5_pci_resources[0].end = PCI_IO_AREA + 0x10000; - - sh5_pci_resources[1].start = memStart; - sh5_pci_resources[1].end = memStart + memSize; - - return register_pci_controller(&sh5pci_controller); -} -arch_initcall(sh5pci_init); diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h deleted file mode 100644 index 91348af0ef6c..000000000000 --- a/arch/sh/drivers/pci/pci-sh5.h +++ /dev/null @@ -1,108 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) - * - * Definitions for the SH5 PCI hardware. - */ -#ifndef __PCI_SH5_H -#define __PCI_SH5_H - -/* Product ID */ -#define PCISH5_PID 0x350d - -/* vendor ID */ -#define PCISH5_VID 0x1054 - -/* Configuration types */ -#define ST_TYPE0 0x00 /* Configuration cycle type 0 */ -#define ST_TYPE1 0x01 /* Configuration cycle type 1 */ - -/* VCR data */ -#define PCISH5_VCR_STATUS 0x00 -#define PCISH5_VCR_VERSION 0x08 - -/* -** ICR register offsets and bits -*/ -#define PCISH5_ICR_CR 0x100 /* PCI control register values */ -#define CR_PBAM (1<<12) -#define CR_PFCS (1<<11) -#define CR_FTO (1<<10) -#define CR_PFE (1<<9) -#define CR_TBS (1<<8) -#define CR_SPUE (1<<7) -#define CR_BMAM (1<<6) -#define CR_HOST (1<<5) -#define CR_CLKEN (1<<4) -#define CR_SOCS (1<<3) -#define CR_IOCS (1<<2) -#define CR_RSTCTL (1<<1) -#define CR_CFINT (1<<0) -#define CR_LOCK_MASK 0xa5000000 - -#define PCISH5_ICR_INT 0x114 /* Interrupt registert values */ -#define INT_MADIM (1<<2) - -#define PCISH5_ICR_LSR0 0X104 /* Local space register values */ -#define PCISH5_ICR_LSR1 0X108 /* Local space register values */ -#define PCISH5_ICR_LAR0 0x10c /* Local address register values */ -#define PCISH5_ICR_LAR1 0x110 /* Local address register values */ -#define PCISH5_ICR_INTM 0x118 /* Interrupt mask register values */ -#define PCISH5_ICR_AIR 0x11c /* Interrupt error address information register values */ -#define PCISH5_ICR_CIR 0x120 /* Interrupt error command information register values */ -#define PCISH5_ICR_AINT 0x130 /* Interrupt error arbiter interrupt register values */ -#define PCISH5_ICR_AINTM 0x134 /* Interrupt error arbiter interrupt mask register values */ -#define PCISH5_ICR_BMIR 0x138 /* Interrupt error info register of bus master values */ -#define PCISH5_ICR_PAR 0x1c0 /* Pio address register values */ -#define PCISH5_ICR_MBR 0x1c4 /* Memory space bank register values */ -#define PCISH5_ICR_IOBR 0x1c8 /* I/O space bank register values */ -#define PCISH5_ICR_PINT 0x1cc /* power management interrupt register values */ -#define PCISH5_ICR_PINTM 0x1d0 /* power management interrupt mask register values */ -#define PCISH5_ICR_MBMR 0x1d8 /* memory space bank mask register values */ -#define PCISH5_ICR_IOBMR 0x1dc /* I/O space bank mask register values */ -#define PCISH5_ICR_CSCR0 0x210 /* PCI cache snoop control register 0 */ -#define PCISH5_ICR_CSCR1 0x214 /* PCI cache snoop control register 1 */ -#define PCISH5_ICR_PDR 0x220 /* Pio data register values */ - -/* These are configs space registers */ -#define PCISH5_ICR_CSR_VID 0x000 /* Vendor id */ -#define PCISH5_ICR_CSR_DID 0x002 /* Device id */ -#define PCISH5_ICR_CSR_CMD 0x004 /* Command register */ -#define PCISH5_ICR_CSR_STATUS 0x006 /* Stautus */ -#define PCISH5_ICR_CSR_IBAR0 0x010 /* I/O base address register */ -#define PCISH5_ICR_CSR_MBAR0 0x014 /* First Memory base address register */ -#define PCISH5_ICR_CSR_MBAR1 0x018 /* Second Memory base address register */ - -/* Base address of registers */ -#define SH5PCI_ICR_BASE (PHYS_PCI_BLOCK + 0x00040000) -#define SH5PCI_IO_BASE (PHYS_PCI_BLOCK + 0x00800000) -/* #define SH5PCI_VCR_BASE (P2SEG_PCICB_BLOCK + P2SEG) */ - -extern unsigned long pcicr_virt; -/* Register selection macro */ -#define PCISH5_ICR_REG(x) ( pcicr_virt + (PCISH5_ICR_##x)) -/* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */ - -/* Write I/O functions */ -#define SH5PCI_WRITE(reg,val) __raw_writel((u32)(val),PCISH5_ICR_REG(reg)) -#define SH5PCI_WRITE_SHORT(reg,val) __raw_writew((u16)(val),PCISH5_ICR_REG(reg)) -#define SH5PCI_WRITE_BYTE(reg,val) __raw_writeb((u8)(val),PCISH5_ICR_REG(reg)) - -/* Read I/O functions */ -#define SH5PCI_READ(reg) __raw_readl(PCISH5_ICR_REG(reg)) -#define SH5PCI_READ_SHORT(reg) __raw_readw(PCISH5_ICR_REG(reg)) -#define SH5PCI_READ_BYTE(reg) __raw_readb(PCISH5_ICR_REG(reg)) - -/* Set PCI config bits */ -#define SET_CONFIG_BITS(bus,devfn,where) ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000) - -/* Set PCI command register */ -#define CONFIG_CMD(bus, devfn, where) SET_CONFIG_BITS(bus->number,devfn,where) - -/* Size converters */ -#define PCISH5_MEM_SIZCONV(x) (((x / 0x40000) - 1) << 18) -#define PCISH5_IO_SIZCONV(x) (((x / 0x40000) - 1) << 18) - -extern struct pci_ops sh5_pci_ops; - -#endif /* __PCI_SH5_H */ diff --git a/arch/sh/include/asm/barrier.h b/arch/sh/include/asm/barrier.h index 66faae19d254..0d58a0159aa6 100644 --- a/arch/sh/include/asm/barrier.h +++ b/arch/sh/include/asm/barrier.h @@ -6,7 +6,7 @@ #ifndef __ASM_SH_BARRIER_H #define __ASM_SH_BARRIER_H -#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) +#if defined(CONFIG_CPU_SH4A) #include #endif @@ -24,7 +24,7 @@ * Historically we have only done this type of barrier for the MMUCR, but * it's also necessary for the CCR, so we make it generic here instead. */ -#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) +#if defined(CONFIG_CPU_SH4A) #define mb() __asm__ __volatile__ ("synco": : :"memory") #define rmb() mb() #define wmb() mb() diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h index 8c3578288db5..445dd14c448a 100644 --- a/arch/sh/include/asm/bitops.h +++ b/arch/sh/include/asm/bitops.h @@ -26,7 +26,6 @@ #include #endif -#ifdef CONFIG_SUPERH32 static inline unsigned long ffz(unsigned long word) { unsigned long result; @@ -60,31 +59,6 @@ static inline unsigned long __ffs(unsigned long word) : "t"); return result; } -#else -static inline unsigned long ffz(unsigned long word) -{ - unsigned long result, __d2, __d3; - - __asm__("gettr tr0, %2\n\t" - "pta $+32, tr0\n\t" - "andi %1, 1, %3\n\t" - "beq %3, r63, tr0\n\t" - "pta $+4, tr0\n" - "0:\n\t" - "shlri.l %1, 1, %1\n\t" - "addi %0, 1, %0\n\t" - "andi %1, 1, %3\n\t" - "beqi %3, 1, tr0\n" - "1:\n\t" - "ptabs %2, tr0\n\t" - : "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3) - : "0" (0L), "1" (word)); - - return result; -} - -#include -#endif #include #include diff --git a/arch/sh/include/asm/bl_bit.h b/arch/sh/include/asm/bl_bit.h index 7e3d81691ad5..5d04f2c62563 100644 --- a/arch/sh/include/asm/bl_bit.h +++ b/arch/sh/include/asm/bl_bit.h @@ -1,11 +1,2 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_SH_BL_BIT_H -#define __ASM_SH_BL_BIT_H - -#ifdef CONFIG_SUPERH32 -# include -#else -# include -#endif - -#endif /* __ASM_SH_BL_BIT_H */ +#include diff --git a/arch/sh/include/asm/bl_bit_64.h b/arch/sh/include/asm/bl_bit_64.h deleted file mode 100644 index aac9780fe864..000000000000 --- a/arch/sh/include/asm/bl_bit_64.h +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * Copyright (C) 2004 Richard Curnow - */ -#ifndef __ASM_SH_BL_BIT_64_H -#define __ASM_SH_BL_BIT_64_H - -#include - -#define SR_BL_LL 0x0000000010000000LL - -static inline void set_bl_bit(void) -{ - unsigned long long __dummy0, __dummy1 = SR_BL_LL; - - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "or %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); - -} - -static inline void clear_bl_bit(void) -{ - unsigned long long __dummy0, __dummy1 = ~SR_BL_LL; - - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "and %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); -} - -#endif /* __ASM_SH_BL_BIT_64_H */ diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h index 030df56bfdb2..fe52abb69cea 100644 --- a/arch/sh/include/asm/bugs.h +++ b/arch/sh/include/asm/bugs.h @@ -53,10 +53,6 @@ static void __init check_bugs(void) *p++ = 's'; *p++ = 'p'; break; - case CPU_FAMILY_SH5: - *p++ = '6'; - *p++ = '4'; - break; case CPU_FAMILY_UNKNOWN: /* * Specifically use CPU_FAMILY_UNKNOWN rather than diff --git a/arch/sh/include/asm/cache_insns.h b/arch/sh/include/asm/cache_insns.h index c5a4acdc53f9..d7edd5297bd0 100644 --- a/arch/sh/include/asm/cache_insns.h +++ b/arch/sh/include/asm/cache_insns.h @@ -1,12 +1,2 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_SH_CACHE_INSNS_H -#define __ASM_SH_CACHE_INSNS_H - - -#ifdef CONFIG_SUPERH32 -# include -#else -# include -#endif - -#endif /* __ASM_SH_CACHE_INSNS_H */ +#include diff --git a/arch/sh/include/asm/cache_insns_64.h b/arch/sh/include/asm/cache_insns_64.h deleted file mode 100644 index ed682b987b0d..000000000000 --- a/arch/sh/include/asm/cache_insns_64.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * Copyright (C) 2004 Richard Curnow - */ -#ifndef __ASM_SH_CACHE_INSNS_64_H -#define __ASM_SH_CACHE_INSNS_64_H - -#define __icbi(addr) __asm__ __volatile__ ( "icbi %0, 0\n\t" : : "r" (addr)) -#define __ocbp(addr) __asm__ __volatile__ ( "ocbp %0, 0\n\t" : : "r" (addr)) -#define __ocbi(addr) __asm__ __volatile__ ( "ocbi %0, 0\n\t" : : "r" (addr)) -#define __ocbwb(addr) __asm__ __volatile__ ( "ocbwb %0, 0\n\t" : : "r" (addr)) - -static inline reg_size_t register_align(void *val) -{ - return (unsigned long long)(signed long long)(signed long)val; -} - -#endif /* __ASM_SH_CACHE_INSNS_64_H */ diff --git a/arch/sh/include/asm/checksum.h b/arch/sh/include/asm/checksum.h index a460a108969d..00e39dd0d146 100644 --- a/arch/sh/include/asm/checksum.h +++ b/arch/sh/include/asm/checksum.h @@ -1,6 +1,2 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#ifdef CONFIG_SUPERH32 -# include -#else -# include -#endif +#include diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h index 5ec8db1ddc20..7661fb5d548a 100644 --- a/arch/sh/include/asm/elf.h +++ b/arch/sh/include/asm/elf.h @@ -133,28 +133,6 @@ typedef struct user_fpu_struct elf_fpregset_t; #define ELF_PLATFORM (utsname()->machine) -#ifdef __SH5__ -#define ELF_PLAT_INIT(_r, load_addr) \ - do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ - _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ - _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ - _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \ - _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \ - _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \ - _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \ - _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \ - _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \ - _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \ - _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \ - _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \ - _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \ - _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \ - _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \ - _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \ - _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \ - _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \ - _r->sr = SR_FD | SR_MMU; } while (0) -#else #define ELF_PLAT_INIT(_r, load_addr) \ do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ @@ -182,7 +160,6 @@ do { \ _r->regs[14] = 0; \ _r->sr = SR_FD; \ } while (0) -#endif #define SET_PERSONALITY(ex) \ set_personality(PER_LINUX_32BIT | (current->personality & (~PER_MASK))) diff --git a/arch/sh/include/asm/extable.h b/arch/sh/include/asm/extable.h index ed46f8bebb9f..5658d2bae372 100644 --- a/arch/sh/include/asm/extable.h +++ b/arch/sh/include/asm/extable.h @@ -4,8 +4,4 @@ #include -#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU) -#define ARCH_HAS_SEARCH_EXTABLE -#endif - #endif diff --git a/arch/sh/include/asm/fixmap.h b/arch/sh/include/asm/fixmap.h index e30348c58073..f38adc189b83 100644 --- a/arch/sh/include/asm/fixmap.h +++ b/arch/sh/include/asm/fixmap.h @@ -83,11 +83,7 @@ extern void __clear_fixmap(enum fixed_addresses idx, pgprot_t flags); * the start of the fixmap, and leave one page empty * at the top of mem.. */ -#ifdef CONFIG_SUPERH32 #define FIXADDR_TOP (P4SEG - PAGE_SIZE) -#else -#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE)) -#endif #define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) #define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h index b42228906eaf..3924d91e0fa0 100644 --- a/arch/sh/include/asm/io.h +++ b/arch/sh/include/asm/io.h @@ -115,12 +115,8 @@ static inline void pfx##reads##bwlq(volatile void __iomem *mem, \ __BUILD_MEMORY_STRING(__raw_, b, u8) __BUILD_MEMORY_STRING(__raw_, w, u16) -#ifdef CONFIG_SUPERH32 void __raw_writesl(void __iomem *addr, const void *data, int longlen); void __raw_readsl(const void __iomem *addr, void *data, int longlen); -#else -__BUILD_MEMORY_STRING(__raw_, l, u32) -#endif __BUILD_MEMORY_STRING(__raw_, q, u64) diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h index 8065a3222e19..6d44c32ef047 100644 --- a/arch/sh/include/asm/irq.h +++ b/arch/sh/include/asm/irq.h @@ -66,8 +66,5 @@ extern void irq_finish(unsigned int irq); #endif #include -#ifdef CONFIG_CPU_SH5 -#include -#endif #endif /* __ASM_SH_IRQ_H */ diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h index 2d09650093c7..48e67d544d53 100644 --- a/arch/sh/include/asm/mmu_context.h +++ b/arch/sh/include/asm/mmu_context.h @@ -48,11 +48,7 @@ */ #define MMU_VPN_MASK 0xfffff000 -#if defined(CONFIG_SUPERH32) #include -#else -#include -#endif /* * Get MMU context if needed. @@ -74,14 +70,6 @@ static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu) */ local_flush_tlb_all(); -#ifdef CONFIG_SUPERH64 - /* - * The SH-5 cache uses the ASIDs, requiring both the I and D - * cache to be flushed when the ASID is exhausted. Weak. - */ - flush_cache_all(); -#endif - /* * Fix version; Note that we avoid version #0 * to distinguish NO_CONTEXT. diff --git a/arch/sh/include/asm/mmu_context_64.h b/arch/sh/include/asm/mmu_context_64.h deleted file mode 100644 index bacafe0b887d..000000000000 --- a/arch/sh/include/asm/mmu_context_64.h +++ /dev/null @@ -1,75 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_SH_MMU_CONTEXT_64_H -#define __ASM_SH_MMU_CONTEXT_64_H - -/* - * sh64-specific mmu_context interface. - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 - 2007 Paul Mundt - */ -#include -#include - -#define SR_ASID_MASK 0xffffffffff00ffffULL -#define SR_ASID_SHIFT 16 - -/* - * Destroy context related info for an mm_struct that is about - * to be put to rest. - */ -static inline void destroy_context(struct mm_struct *mm) -{ - /* Well, at least free TLB entries */ - flush_tlb_mm(mm); -} - -static inline unsigned long get_asid(void) -{ - unsigned long long sr; - - asm volatile ("getcon " __SR ", %0\n\t" - : "=r" (sr)); - - sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK; - return (unsigned long) sr; -} - -/* Set ASID into SR */ -static inline void set_asid(unsigned long asid) -{ - unsigned long long sr, pc; - - asm volatile ("getcon " __SR ", %0" : "=r" (sr)); - - sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT); - - /* - * It is possible that this function may be inlined and so to avoid - * the assembler reporting duplicate symbols we make use of the - * gas trick of generating symbols using numerics and forward - * reference. - */ - asm volatile ("movi 1, %1\n\t" - "shlli %1, 28, %1\n\t" - "or %0, %1, %1\n\t" - "putcon %1, " __SR "\n\t" - "putcon %0, " __SSR "\n\t" - "movi 1f, %1\n\t" - "ori %1, 1 , %1\n\t" - "putcon %1, " __SPC "\n\t" - "rte\n" - "1:\n\t" - : "=r" (sr), "=r" (pc) : "0" (sr)); -} - -/* arch/sh/kernel/cpu/sh5/entry.S */ -extern unsigned long switch_and_save_asid(unsigned long new_asid); - -/* No spare register to twiddle, so use a software cache */ -extern pgd_t *mmu_pdtp_cache; - -#define set_TTB(pgd) (mmu_pdtp_cache = (pgd)) -#define get_TTB() (mmu_pdtp_cache) - -#endif /* __ASM_SH_MMU_CONTEXT_64_H */ diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h index ea8d68f58e39..eca5daa43b93 100644 --- a/arch/sh/include/asm/page.h +++ b/arch/sh/include/asm/page.h @@ -35,8 +35,6 @@ #define HPAGE_SHIFT 22 #elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) #define HPAGE_SHIFT 26 -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) -#define HPAGE_SHIFT 29 #endif #ifdef CONFIG_HUGETLB_PAGE @@ -82,18 +80,12 @@ typedef struct { unsigned long long pgd; } pgd_t; ((x).pte_low | ((unsigned long long)(x).pte_high << 32)) #define __pte(x) \ ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; }) -#elif defined(CONFIG_SUPERH32) +#else typedef struct { unsigned long pte_low; } pte_t; typedef struct { unsigned long pgprot; } pgprot_t; typedef struct { unsigned long pgd; } pgd_t; #define pte_val(x) ((x).pte_low) #define __pte(x) ((pte_t) { (x) } ) -#else -typedef struct { unsigned long long pte_low; } pte_t; -typedef struct { unsigned long long pgprot; } pgprot_t; -typedef struct { unsigned long pgd; } pgd_t; -#define pte_val(x) ((x).pte_low) -#define __pte(x) ((pte_t) { (x) } ) #endif #define pgd_val(x) ((x).pgd) @@ -191,15 +183,4 @@ typedef struct page *pgtable_t; */ #define ARCH_DMA_MINALIGN L1_CACHE_BYTES -#ifdef CONFIG_SUPERH64 -/* - * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still - * happily generate {ld/st}.q pairs, requiring us to have 8-byte - * alignment to avoid traps. The kmalloc alignment is guaranteed by - * virtue of L1_CACHE_BYTES, requiring this to only be special cased - * for slab caches. - */ -#define ARCH_SLAB_MINALIGN 8 -#endif - #endif /* __ASM_SH_PAGE_H */ diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h index cbd0f3c55a0c..02d936406c6e 100644 --- a/arch/sh/include/asm/pgtable.h +++ b/arch/sh/include/asm/pgtable.h @@ -76,18 +76,10 @@ static inline unsigned long phys_addr_mask(void) #define PTE_PHYS_MASK (phys_addr_mask() & PAGE_MASK) #define PTE_FLAGS_MASK (~(PTE_PHYS_MASK) << PAGE_SHIFT) -#ifdef CONFIG_SUPERH32 #define VMALLOC_START (P3SEG) -#else -#define VMALLOC_START (0xf0000000) -#endif #define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE) -#if defined(CONFIG_SUPERH32) #include -#else -#include -#endif /* * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page @@ -159,15 +151,6 @@ static inline bool pte_access_permitted(pte_t pte, bool write) prot |= _PAGE_EXT(_PAGE_EXT_KERN_WRITE | _PAGE_EXT_USER_WRITE); return __pte_access_permitted(pte, prot); } -#elif defined(CONFIG_SUPERH64) -static inline bool pte_access_permitted(pte_t pte, bool write) -{ - u64 prot = _PAGE_PRESENT | _PAGE_USER | _PAGE_READ; - - if (write) - prot |= _PAGE_WRITE; - return __pte_access_permitted(pte, prot); -} #else static inline bool pte_access_permitted(pte_t pte, bool write) { diff --git a/arch/sh/include/asm/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h deleted file mode 100644 index 1778bc5971e7..000000000000 --- a/arch/sh/include/asm/pgtable_64.h +++ /dev/null @@ -1,307 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_SH_PGTABLE_64_H -#define __ASM_SH_PGTABLE_64_H - -/* - * include/asm-sh/pgtable_64.h - * - * This file contains the functions and defines necessary to modify and use - * the SuperH page table tree. - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - * Copyright (C) 2003, 2004 Richard Curnow - */ -#include -#include -#include - -/* - * Error outputs. - */ -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - -/* - * Table setting routines. Used within arch/mm only. - */ -#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) - -static __inline__ void set_pte(pte_t *pteptr, pte_t pteval) -{ - unsigned long long x = ((unsigned long long) pteval.pte_low); - unsigned long long *xp = (unsigned long long *) pteptr; - /* - * Sign-extend based on NPHYS. - */ - *(xp) = (x & NPHYS_SIGN) ? (x | NPHYS_MASK) : x; -} -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) - -/* - * PGD defines. Top level. - */ - -/* To find an entry in a generic PGD. */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) -#define __pgd_offset(address) pgd_index(address) -#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) - -/* To find an entry in a kernel PGD. */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) -#define __pmd_offset(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)) - -/* - * PMD level access routines. Same notes as above. - */ -#define _PMD_EMPTY 0x0 -/* Either the PMD is empty or present, it's not paged out */ -#define pmd_present(pmd_entry) (pmd_val(pmd_entry) & _PAGE_PRESENT) -#define pmd_clear(pmd_entry_p) (set_pmd((pmd_entry_p), __pmd(_PMD_EMPTY))) -#define pmd_none(pmd_entry) (pmd_val((pmd_entry)) == _PMD_EMPTY) -#define pmd_bad(pmd_entry) ((pmd_val(pmd_entry) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) - -#define pmd_page_vaddr(pmd_entry) \ - ((unsigned long) __va(pmd_val(pmd_entry) & PAGE_MASK)) - -#define pmd_page(pmd) \ - (virt_to_page(pmd_val(pmd))) - -/* PMD to PTE dereferencing */ -#define pte_index(address) \ - ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) - -#define __pte_offset(address) pte_index(address) - -#define pte_offset_kernel(dir, addr) \ - ((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr))) - -#define pte_offset_map(dir,addr) pte_offset_kernel(dir, addr) -#define pte_unmap(pte) do { } while (0) - -#ifndef __ASSEMBLY__ -/* - * PTEL coherent flags. - * See Chapter 17 ST50 CPU Core Volume 1, Architecture. - */ -/* The bits that are required in the SH-5 TLB are placed in the h/w-defined - positions, to avoid expensive bit shuffling on every refill. The remaining - bits are used for s/w purposes and masked out on each refill. - - Note, the PTE slots are used to hold data of type swp_entry_t when a page is - swapped out. Only the _PAGE_PRESENT flag is significant when the page is - swapped out, and it must be placed so that it doesn't overlap either the - type or offset fields of swp_entry_t. For x86, offset is at [31:8] and type - at [6:1], with _PAGE_PRESENT at bit 0 for both pte_t and swp_entry_t. This - scheme doesn't map to SH-5 because bit [0] controls cacheability. So bit - [2] is used for _PAGE_PRESENT and the type field of swp_entry_t is split - into 2 pieces. That is handled by SWP_ENTRY and SWP_TYPE below. */ -#define _PAGE_WT 0x001 /* CB0: if cacheable, 1->write-thru, 0->write-back */ -#define _PAGE_DEVICE 0x001 /* CB0: if uncacheable, 1->device (i.e. no write-combining or reordering at bus level) */ -#define _PAGE_CACHABLE 0x002 /* CB1: uncachable/cachable */ -#define _PAGE_PRESENT 0x004 /* software: page referenced */ -#define _PAGE_SIZE0 0x008 /* SZ0-bit : size of page */ -#define _PAGE_SIZE1 0x010 /* SZ1-bit : size of page */ -#define _PAGE_SHARED 0x020 /* software: reflects PTEH's SH */ -#define _PAGE_READ 0x040 /* PR0-bit : read access allowed */ -#define _PAGE_EXECUTE 0x080 /* PR1-bit : execute access allowed */ -#define _PAGE_WRITE 0x100 /* PR2-bit : write access allowed */ -#define _PAGE_USER 0x200 /* PR3-bit : user space access allowed */ -#define _PAGE_DIRTY 0x400 /* software: page accessed in write */ -#define _PAGE_ACCESSED 0x800 /* software: page referenced */ - -/* Wrapper for extended mode pgprot twiddling */ -#define _PAGE_EXT(x) ((unsigned long long)(x) << 32) - -/* - * We can use the sign-extended bits in the PTEL to get 32 bits of - * software flags. This works for now because no implementations uses - * anything above the PPN field. - */ -#define _PAGE_WIRED _PAGE_EXT(0x001) /* software: wire the tlb entry */ -#define _PAGE_SPECIAL _PAGE_EXT(0x002) - -#define _PAGE_CLEAR_FLAGS (_PAGE_PRESENT | _PAGE_SHARED | \ - _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_WIRED) - -/* Mask which drops software flags */ -#define _PAGE_FLAGS_HARDWARE_MASK (NEFF_MASK & ~(_PAGE_CLEAR_FLAGS)) - -/* - * HugeTLB support - */ -#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -#define _PAGE_SZHUGE (_PAGE_SIZE0) -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) -#define _PAGE_SZHUGE (_PAGE_SIZE1) -#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) -#define _PAGE_SZHUGE (_PAGE_SIZE0 | _PAGE_SIZE1) -#endif - -/* - * Stub out _PAGE_SZHUGE if we don't have a good definition for it, - * to make pte_mkhuge() happy. - */ -#ifndef _PAGE_SZHUGE -# define _PAGE_SZHUGE (0) -#endif - -/* - * Default flags for a Kernel page. - * This is fundametally also SHARED because the main use of this define - * (other than for PGD/PMD entries) is for the VMALLOC pool which is - * contextless. - * - * _PAGE_EXECUTE is required for modules - * - */ -#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ - _PAGE_EXECUTE | \ - _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_DIRTY | \ - _PAGE_SHARED) - -/* Default flags for a User page */ -#define _PAGE_TABLE (_KERNPG_TABLE | _PAGE_USER) - -#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \ - _PAGE_SPECIAL) - -/* - * We have full permissions (Read/Write/Execute/Shared). - */ -#define _PAGE_COMMON (_PAGE_PRESENT | _PAGE_USER | \ - _PAGE_CACHABLE | _PAGE_ACCESSED) - -#define PAGE_NONE __pgprot(_PAGE_CACHABLE | _PAGE_ACCESSED) -#define PAGE_SHARED __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_WRITE | \ - _PAGE_SHARED) -#define PAGE_EXECREAD __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_EXECUTE) - -/* - * We need to include PAGE_EXECUTE in PAGE_COPY because it is the default - * protection mode for the stack. - */ -#define PAGE_COPY PAGE_EXECREAD - -#define PAGE_READONLY __pgprot(_PAGE_COMMON | _PAGE_READ) -#define PAGE_WRITEONLY __pgprot(_PAGE_COMMON | _PAGE_WRITE) -#define PAGE_RWX __pgprot(_PAGE_COMMON | _PAGE_READ | \ - _PAGE_WRITE | _PAGE_EXECUTE) -#define PAGE_KERNEL __pgprot(_KERNPG_TABLE) - -#define PAGE_KERNEL_NOCACHE \ - __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ - _PAGE_EXECUTE | _PAGE_ACCESSED | \ - _PAGE_DIRTY | _PAGE_SHARED) - -/* Make it a device mapping for maximum safety (e.g. for mapping device - registers into user-space via /dev/map). */ -#define pgprot_noncached(x) __pgprot(((x).pgprot & ~(_PAGE_CACHABLE)) | _PAGE_DEVICE) -#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) - -/* - * PTE level access routines. - * - * Note1: - * It's the tree walk leaf. This is physical address to be stored. - * - * Note 2: - * Regarding the choice of _PTE_EMPTY: - - We must choose a bit pattern that cannot be valid, whether or not the page - is present. bit[2]==1 => present, bit[2]==0 => swapped out. If swapped - out, bits [31:8], [6:3], [1:0] are under swapper control, so only bit[7] is - left for us to select. If we force bit[7]==0 when swapped out, we could use - the combination bit[7,2]=2'b10 to indicate an empty PTE. Alternatively, if - we force bit[7]==1 when swapped out, we can use all zeroes to indicate - empty. This is convenient, because the page tables get cleared to zero - when they are allocated. - - */ -#define _PTE_EMPTY 0x0 -#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) -#define pte_clear(mm,addr,xp) (set_pte_at(mm, addr, xp, __pte(_PTE_EMPTY))) -#define pte_none(x) (pte_val(x) == _PTE_EMPTY) - -/* - * Some definitions to translate between mem_map, PTEs, and page - * addresses: - */ - -/* - * Given a PTE, return the index of the mem_map[] entry corresponding - * to the page frame the PTE. Get the absolute physical address, make - * a relative physical address and translate it to an index. - */ -#define pte_pagenr(x) (((unsigned long) (pte_val(x)) - \ - __MEMORY_START) >> PAGE_SHIFT) - -/* - * Given a PTE, return the "struct page *". - */ -#define pte_page(x) (mem_map + pte_pagenr(x)) - -/* - * Return number of (down rounded) MB corresponding to x pages. - */ -#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) - - -/* - * The following have defined behavior only work if pte_present() is true. - */ -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; } -static inline int pte_special(pte_t pte){ return pte_val(pte) & _PAGE_SPECIAL; } - -static inline pte_t pte_wrprotect(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_WRITE)); return pte; } -static inline pte_t pte_mkclean(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; } -static inline pte_t pte_mkold(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; } -static inline pte_t pte_mkwrite(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_WRITE)); return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; } -static inline pte_t pte_mkhuge(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; } -static inline pte_t pte_mkspecial(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_SPECIAL)); return pte; } - -/* - * Conversion functions: convert a page and protection to a page entry. - * - * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) - */ -#define mk_pte(page,pgprot) \ -({ \ - pte_t __pte; \ - \ - set_pte(&__pte, __pte((((page)-mem_map) << PAGE_SHIFT) | \ - __MEMORY_START | pgprot_val((pgprot)))); \ - __pte; \ -}) - -/* - * This takes a (absolute) physical page address that is used - * by the remapping functions - */ -#define mk_pte_phys(physpage, pgprot) \ -({ pte_t __pte; set_pte(&__pte, __pte(physpage | pgprot_val(pgprot))); __pte; }) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; } - -/* Encode and decode a swap entry */ -#define __swp_type(x) (((x).val & 3) + (((x).val >> 1) & 0x3c)) -#define __swp_offset(x) ((x).val >> 8) -#define __swp_entry(type, offset) ((swp_entry_t) { ((offset << 8) + ((type & 0x3c) << 1) + (type & 3)) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -#endif /* !__ASSEMBLY__ */ - -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) - -#endif /* __ASM_SH_PGTABLE_64_H */ diff --git a/arch/sh/include/asm/posix_types.h b/arch/sh/include/asm/posix_types.h index 0d670fd94fe7..f8982b757c33 100644 --- a/arch/sh/include/asm/posix_types.h +++ b/arch/sh/include/asm/posix_types.h @@ -1,6 +1,2 @@ /* SPDX-License-Identifier: GPL-2.0 */ -# ifdef CONFIG_SUPERH32 -# include -# else -# include -# endif +#include diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h index 6fbf8c80e498..3820d698846e 100644 --- a/arch/sh/include/asm/processor.h +++ b/arch/sh/include/asm/processor.h @@ -39,9 +39,6 @@ enum cpu_type { /* SH4AL-DSP types */ CPU_SH7343, CPU_SH7722, CPU_SH7366, CPU_SH7372, - /* SH-5 types */ - CPU_SH5_101, CPU_SH5_103, - /* Unknown subtype */ CPU_SH_NONE }; @@ -53,7 +50,6 @@ enum cpu_family { CPU_FAMILY_SH4, CPU_FAMILY_SH4A, CPU_FAMILY_SH4AL_DSP, - CPU_FAMILY_SH5, CPU_FAMILY_UNKNOWN, }; @@ -167,18 +163,12 @@ int vsyscall_init(void); */ #ifdef CONFIG_CPU_SH2A extern unsigned int instruction_size(unsigned int insn); -#elif defined(CONFIG_SUPERH32) -#define instruction_size(insn) (2) #else -#define instruction_size(insn) (4) +#define instruction_size(insn) (2) #endif #endif /* __ASSEMBLY__ */ -#ifdef CONFIG_SUPERH32 -# include -#else -# include -#endif +#include #endif /* __ASM_SH_PROCESSOR_H */ diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h deleted file mode 100644 index 53efc9f51ef1..000000000000 --- a/arch/sh/include/asm/processor_64.h +++ /dev/null @@ -1,212 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_SH_PROCESSOR_64_H -#define __ASM_SH_PROCESSOR_64_H - -/* - * include/asm-sh/processor_64.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * Copyright (C) 2004 Richard Curnow - */ -#ifndef __ASSEMBLY__ - -#include -#include -#include -#include - -#endif - -/* - * User space process size: 2GB - 4k. - */ -#define TASK_SIZE 0x7ffff000UL - -#define STACK_TOP TASK_SIZE -#define STACK_TOP_MAX STACK_TOP - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3) - -/* - * Bit of SR register - * - * FD-bit: - * When it's set, it means the processor doesn't have right to use FPU, - * and it results exception when the floating operation is executed. - * - * IMASK-bit: - * Interrupt level mask - * - * STEP-bit: - * Single step bit - * - */ -#if defined(CONFIG_SH64_SR_WATCH) -#define SR_MMU 0x84000000 -#else -#define SR_MMU 0x80000000 -#endif - -#define SR_IMASK 0x000000f0 -#define SR_FD 0x00008000 -#define SR_SSTEP 0x08000000 - -#ifndef __ASSEMBLY__ - -/* - * FPU structure and data : require 8-byte alignment as we need to access it - with fld.p, fst.p - */ - -struct sh_fpu_hard_struct { - unsigned long fp_regs[64]; - unsigned int fpscr; - /* long status; * software status information */ -}; - -/* Dummy fpu emulator */ -struct sh_fpu_soft_struct { - unsigned long fp_regs[64]; - unsigned int fpscr; - unsigned char lookahead; - unsigned long entry_pc; -}; - -union thread_xstate { - struct sh_fpu_hard_struct hardfpu; - struct sh_fpu_soft_struct softfpu; - /* - * The structure definitions only produce 32 bit alignment, yet we need - * to access them using 64 bit load/store as well. - */ - unsigned long long alignment_dummy; -}; - -struct thread_struct { - unsigned long sp; - unsigned long pc; - - /* Various thread flags, see SH_THREAD_xxx */ - unsigned long flags; - - /* This stores the address of the pt_regs built during a context - switch, or of the register save area built for a kernel mode - exception. It is used for backtracing the stack of a sleeping task - or one that traps in kernel mode. */ - struct pt_regs *kregs; - /* This stores the address of the pt_regs constructed on entry from - user mode. It is a fixed value over the lifetime of a process, or - NULL for a kernel thread. */ - struct pt_regs *uregs; - - unsigned long address; - /* Hardware debugging registers may come here */ - - /* floating point info */ - union thread_xstate *xstate; - - /* - * fpu_counter contains the number of consecutive context switches - * that the FPU is used. If this is over a threshold, the lazy fpu - * saving becomes unlazy to save the trap. This is an unsigned char - * so that after 256 times the counter wraps and the behavior turns - * lazy again; this to deal with bursty apps that only use FPU for - * a short time - */ - unsigned char fpu_counter; -}; - -#define INIT_MMAP \ -{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL } - -#define INIT_THREAD { \ - .sp = sizeof(init_stack) + \ - (long) &init_stack, \ - .pc = 0, \ - .kregs = &fake_swapper_regs, \ - .uregs = NULL, \ - .address = 0, \ - .flags = 0, \ -} - -/* - * Do necessary setup to start up a newly executed thread. - */ -#define SR_USER (SR_MMU | SR_FD) - -#define start_thread(_regs, new_pc, new_sp) \ - _regs->sr = SR_USER; /* User mode. */ \ - _regs->pc = new_pc - 4; /* Compensate syscall exit */ \ - _regs->pc |= 1; /* Set SHmedia ! */ \ - _regs->regs[18] = 0; \ - _regs->regs[15] = new_sp - -/* Forward declaration, a strange C thing */ -struct task_struct; -struct mm_struct; - -/* Free all resources held by a thread. */ -extern void release_thread(struct task_struct *); - -/* - * FPU lazy state save handling. - */ - -static inline void disable_fpu(void) -{ - unsigned long long __dummy; - - /* Set FD flag in SR */ - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "or %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy) - : "r" (SR_FD)); -} - -static inline void enable_fpu(void) -{ - unsigned long long __dummy; - - /* Clear out FD flag in SR */ - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "and %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy) - : "r" (~SR_FD)); -} - -/* Round to nearest, no exceptions on inexact, overflow, underflow, - zero-divide, invalid. Configure option for whether to flush denorms to - zero, or except if a denorm is encountered. */ -#if defined(CONFIG_SH64_FPU_DENORM_FLUSH) -#define FPSCR_INIT 0x00040000 -#else -#define FPSCR_INIT 0x00000000 -#endif - -#ifdef CONFIG_SH_FPU -/* Initialise the FP state of a task */ -void fpinit(struct sh_fpu_hard_struct *fpregs); -#else -#define fpinit(fpregs) do { } while (0) -#endif - -extern struct task_struct *last_task_used_math; - -/* - * Return saved PC of a blocked thread. - */ -#define thread_saved_pc(tsk) (tsk->thread.pc) - -extern unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) ((tsk)->thread.pc) -#define KSTK_ESP(tsk) ((tsk)->thread.sp) - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH_PROCESSOR_64_H */ diff --git a/arch/sh/include/asm/ptrace_64.h b/arch/sh/include/asm/ptrace_64.h deleted file mode 100644 index 6ee08229b433..000000000000 --- a/arch/sh/include/asm/ptrace_64.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_SH_PTRACE_64_H -#define __ASM_SH_PTRACE_64_H - -#include - - -#define MAX_REG_OFFSET offsetof(struct pt_regs, tregs[7]) -static inline long regs_return_value(struct pt_regs *regs) -{ - return regs->regs[3]; -} - -#endif /* __ASM_SH_PTRACE_64_H */ diff --git a/arch/sh/include/asm/string.h b/arch/sh/include/asm/string.h index 84fc5ed9c5b3..0f6331ec28ed 100644 --- a/arch/sh/include/asm/string.h +++ b/arch/sh/include/asm/string.h @@ -1,6 +1,2 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#ifdef CONFIG_SUPERH32 -# include -#else -# include -#endif +#include diff --git a/arch/sh/include/asm/string_64.h b/arch/sh/include/asm/string_64.h deleted file mode 100644 index d51d6150a4e2..000000000000 --- a/arch/sh/include/asm/string_64.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_SH_STRING_64_H -#define __ASM_SH_STRING_64_H - -#ifdef __KERNEL__ - -#define __HAVE_ARCH_MEMSET -extern void *memset(void *__s, int __c, size_t __count); - -#define __HAVE_ARCH_MEMCPY -extern void *memcpy(void *dest, const void *src, size_t count); - -#define __HAVE_ARCH_STRLEN -extern size_t strlen(const char *); - -#define __HAVE_ARCH_STRCPY -extern char *strcpy(char *__dest, const char *__src); - -#endif /* __KERNEL__ */ - -#endif /* __ASM_SH_STRING_64_H */ diff --git a/arch/sh/include/asm/switch_to.h b/arch/sh/include/asm/switch_to.h index 9eec80ab5aa2..bd139bcdeec1 100644 --- a/arch/sh/include/asm/switch_to.h +++ b/arch/sh/include/asm/switch_to.h @@ -4,13 +4,4 @@ * Copyright (C) 2003 Paul Mundt * Copyright (C) 2004 Richard Curnow */ -#ifndef __ASM_SH_SWITCH_TO_H -#define __ASM_SH_SWITCH_TO_H - -#ifdef CONFIG_SUPERH32 -# include -#else -# include -#endif - -#endif /* __ASM_SH_SWITCH_TO_H */ +#include diff --git a/arch/sh/include/asm/switch_to_64.h b/arch/sh/include/asm/switch_to_64.h deleted file mode 100644 index 2dbf2311669f..000000000000 --- a/arch/sh/include/asm/switch_to_64.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * Copyright (C) 2004 Richard Curnow - */ -#ifndef __ASM_SH_SWITCH_TO_64_H -#define __ASM_SH_SWITCH_TO_64_H - -struct thread_struct; -struct task_struct; - -/* - * switch_to() should switch tasks to task nr n, first - */ -struct task_struct *sh64_switch_to(struct task_struct *prev, - struct thread_struct *prev_thread, - struct task_struct *next, - struct thread_struct *next_thread); - -#define switch_to(prev,next,last) \ -do { \ - if (last_task_used_math != next) { \ - struct pt_regs *regs = next->thread.uregs; \ - if (regs) regs->sr |= SR_FD; \ - } \ - last = sh64_switch_to(prev, &prev->thread, next, \ - &next->thread); \ -} while (0) - - -#endif /* __ASM_SH_SWITCH_TO_64_H */ diff --git a/arch/sh/include/asm/syscall.h b/arch/sh/include/asm/syscall.h index 90ba00002626..570699eb0e58 100644 --- a/arch/sh/include/asm/syscall.h +++ b/arch/sh/include/asm/syscall.h @@ -4,10 +4,6 @@ extern const unsigned long sys_call_table[]; -#ifdef CONFIG_SUPERH32 -# include -#else -# include -#endif +#include #endif /* __ASM_SH_SYSCALL_H */ diff --git a/arch/sh/include/asm/syscall_64.h b/arch/sh/include/asm/syscall_64.h deleted file mode 100644 index 72efcbc76f91..000000000000 --- a/arch/sh/include/asm/syscall_64.h +++ /dev/null @@ -1,75 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_SH_SYSCALL_64_H -#define __ASM_SH_SYSCALL_64_H - -#include -#include -#include -#include - -/* The system call number is given by the user in R9 */ -static inline long syscall_get_nr(struct task_struct *task, - struct pt_regs *regs) -{ - return (regs->syscall_nr >= 0) ? regs->regs[9] : -1L; -} - -static inline void syscall_rollback(struct task_struct *task, - struct pt_regs *regs) -{ - /* - * XXX: This needs some thought. On SH we don't - * save away the original R9 value anywhere. - */ -} - -static inline long syscall_get_error(struct task_struct *task, - struct pt_regs *regs) -{ - return IS_ERR_VALUE(regs->regs[9]) ? regs->regs[9] : 0; -} - -static inline long syscall_get_return_value(struct task_struct *task, - struct pt_regs *regs) -{ - return regs->regs[9]; -} - -static inline void syscall_set_return_value(struct task_struct *task, - struct pt_regs *regs, - int error, long val) -{ - if (error) - regs->regs[9] = -error; - else - regs->regs[9] = val; -} - -static inline void syscall_get_arguments(struct task_struct *task, - struct pt_regs *regs, - unsigned long *args) -{ - memcpy(args, ®s->regs[2], 6 * sizeof(args[0])); -} - -static inline void syscall_set_arguments(struct task_struct *task, - struct pt_regs *regs, - const unsigned long *args) -{ - memcpy(®s->regs[2], args, 6 * sizeof(args[0])); -} - -static inline int syscall_get_arch(struct task_struct *task) -{ - int arch = AUDIT_ARCH_SH; - -#ifdef CONFIG_64BIT - arch |= __AUDIT_ARCH_64BIT; -#endif -#ifdef CONFIG_CPU_LITTLE_ENDIAN - arch |= __AUDIT_ARCH_LE; -#endif - - return arch; -} -#endif /* __ASM_SH_SYSCALL_64_H */ diff --git a/arch/sh/include/asm/syscalls.h b/arch/sh/include/asm/syscalls.h index 995ef046232c..387105316d28 100644 --- a/arch/sh/include/asm/syscalls.h +++ b/arch/sh/include/asm/syscalls.h @@ -2,8 +2,6 @@ #ifndef __ASM_SH_SYSCALLS_H #define __ASM_SH_SYSCALLS_H -#ifdef __KERNEL__ - asmlinkage int old_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, int fd, unsigned long off); @@ -11,11 +9,6 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff); -#ifdef CONFIG_SUPERH32 -# include -#else -# include -#endif +#include -#endif /* __KERNEL__ */ #endif /* __ASM_SH_SYSCALLS_H */ diff --git a/arch/sh/include/asm/syscalls_64.h b/arch/sh/include/asm/syscalls_64.h deleted file mode 100644 index df42656cebea..000000000000 --- a/arch/sh/include/asm/syscalls_64.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_SH_SYSCALLS_64_H -#define __ASM_SH_SYSCALLS_64_H - -#ifdef __KERNEL__ - -#include -#include -#include - -struct pt_regs; - -/* Misc syscall related bits */ -asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs); -asmlinkage void do_syscall_trace_leave(struct pt_regs *regs); - -#endif /* __KERNEL__ */ -#endif /* __ASM_SH_SYSCALLS_64_H */ diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h index cf5c792bf70b..6404be69d5fa 100644 --- a/arch/sh/include/asm/thread_info.h +++ b/arch/sh/include/asm/thread_info.h @@ -70,9 +70,7 @@ register unsigned long current_stack_pointer asm("r15") __used; static inline struct thread_info *current_thread_info(void) { struct thread_info *ti; -#if defined(CONFIG_SUPERH64) - __asm__ __volatile__ ("getcon cr17, %0" : "=r" (ti)); -#elif defined(CONFIG_CPU_HAS_SR_RB) +#if defined(CONFIG_CPU_HAS_SR_RB) __asm__ __volatile__ ("stc r7_bank, %0" : "=r" (ti)); #else unsigned long __dummy; diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h index bc77f3dd4261..360f713d009b 100644 --- a/arch/sh/include/asm/tlb.h +++ b/arch/sh/include/asm/tlb.h @@ -2,10 +2,6 @@ #ifndef __ASM_SH_TLB_H #define __ASM_SH_TLB_H -#ifdef CONFIG_SUPERH64 -# include -#endif - #ifndef __ASSEMBLY__ #include @@ -14,7 +10,7 @@ #include -#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SUPERH64) +#if defined(CONFIG_CPU_SH4) extern void tlb_wire_entry(struct vm_area_struct *, unsigned long, pte_t); extern void tlb_unwire_entry(void); #else diff --git a/arch/sh/include/asm/tlb_64.h b/arch/sh/include/asm/tlb_64.h deleted file mode 100644 index 59fa0a23dad7..000000000000 --- a/arch/sh/include/asm/tlb_64.h +++ /dev/null @@ -1,68 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * include/asm-sh/tlb_64.h - * - * Copyright (C) 2003 Paul Mundt - */ -#ifndef __ASM_SH_TLB_64_H -#define __ASM_SH_TLB_64_H - -/* ITLB defines */ -#define ITLB_FIXED 0x00000000 /* First fixed ITLB, see head.S */ -#define ITLB_LAST_VAR_UNRESTRICTED 0x000003F0 /* Last ITLB */ - -/* DTLB defines */ -#define DTLB_FIXED 0x00800000 /* First fixed DTLB, see head.S */ -#define DTLB_LAST_VAR_UNRESTRICTED 0x008003F0 /* Last DTLB */ - -#ifndef __ASSEMBLY__ - -/** - * for_each_dtlb_entry - Iterate over free (non-wired) DTLB entries - * - * @tlb: TLB entry - */ -#define for_each_dtlb_entry(tlb) \ - for (tlb = cpu_data->dtlb.first; \ - tlb <= cpu_data->dtlb.last; \ - tlb += cpu_data->dtlb.step) - -/** - * for_each_itlb_entry - Iterate over free (non-wired) ITLB entries - * - * @tlb: TLB entry - */ -#define for_each_itlb_entry(tlb) \ - for (tlb = cpu_data->itlb.first; \ - tlb <= cpu_data->itlb.last; \ - tlb += cpu_data->itlb.step) - -/** - * __flush_tlb_slot - Flushes TLB slot @slot. - * - * @slot: Address of TLB slot. - */ -static inline void __flush_tlb_slot(unsigned long long slot) -{ - __asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot)); -} - -#ifdef CONFIG_MMU -/* arch/sh64/mm/tlb.c */ -int sh64_tlb_init(void); -unsigned long long sh64_next_free_dtlb_entry(void); -unsigned long long sh64_get_wired_dtlb_entry(void); -int sh64_put_wired_dtlb_entry(unsigned long long entry); -void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr, - unsigned long asid, unsigned long paddr); -void sh64_teardown_tlb_slot(unsigned long long config_addr); -#else -#define sh64_tlb_init() do { } while (0) -#define sh64_next_free_dtlb_entry() (0) -#define sh64_get_wired_dtlb_entry() (0) -#define sh64_put_wired_dtlb_entry(entry) do { } while (0) -#define sh64_setup_tlb_slot(conf, virt, asid, phys) do { } while (0) -#define sh64_teardown_tlb_slot(addr) do { } while (0) -#endif /* CONFIG_MMU */ -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH_TLB_64_H */ diff --git a/arch/sh/include/asm/traps.h b/arch/sh/include/asm/traps.h index 8844ed0c0fde..ba831bc7e08f 100644 --- a/arch/sh/include/asm/traps.h +++ b/arch/sh/include/asm/traps.h @@ -4,11 +4,7 @@ #include -#ifdef CONFIG_SUPERH32 # include -#else -# include -#endif BUILD_TRAP_HANDLER(address_error); BUILD_TRAP_HANDLER(debug); diff --git a/arch/sh/include/asm/traps_64.h b/arch/sh/include/asm/traps_64.h deleted file mode 100644 index f28db6dfbe45..000000000000 --- a/arch/sh/include/asm/traps_64.h +++ /dev/null @@ -1,35 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * Copyright (C) 2004 Richard Curnow - */ -#ifndef __ASM_SH_TRAPS_64_H -#define __ASM_SH_TRAPS_64_H - -#include - -extern void phys_stext(void); - -#define lookup_exception_vector() \ -({ \ - unsigned long _vec; \ - \ - __asm__ __volatile__ ( \ - "getcon " __EXPEVT ", %0\n\t" \ - : "=r" (_vec) \ - ); \ - \ - _vec; \ -}) - -static inline void trigger_address_error(void) -{ - phys_stext(); -} - -#define BUILD_TRAP_HANDLER(name) \ -asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs) -#define TRAP_HANDLER_DECL - -#endif /* __ASM_SH_TRAPS_64_H */ diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h index df96c511bb6e..68eb24ad2013 100644 --- a/arch/sh/include/asm/types.h +++ b/arch/sh/include/asm/types.h @@ -9,13 +9,8 @@ */ #ifndef __ASSEMBLY__ -#ifdef CONFIG_SUPERH32 typedef u16 insn_size_t; typedef u32 reg_size_t; -#else -typedef u32 insn_size_t; -typedef u64 reg_size_t; -#endif #endif /* __ASSEMBLY__ */ #endif /* __ASM_SH_TYPES_H */ diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h index 5fe751ad7582..73f3b48d4a34 100644 --- a/arch/sh/include/asm/uaccess.h +++ b/arch/sh/include/asm/uaccess.h @@ -96,11 +96,7 @@ struct __large_struct { unsigned long buf[100]; }; __pu_err; \ }) -#ifdef CONFIG_SUPERH32 # include -#else -# include -#endif extern long strncpy_from_user(char *dest, const char __user *src, long count); diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h deleted file mode 100644 index 0c19d02dc566..000000000000 --- a/arch/sh/include/asm/uaccess_64.h +++ /dev/null @@ -1,85 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_SH_UACCESS_64_H -#define __ASM_SH_UACCESS_64_H - -/* - * include/asm-sh/uaccess_64.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - * - * User space memory access functions - * - * Copyright (C) 1999 Niibe Yutaka - * - * Based on: - * MIPS implementation version 1.15 by - * Copyright (C) 1996, 1997, 1998 by Ralf Baechle - * and i386 version. - */ - -#define __get_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - x = 0; \ - switch (size) { \ - case 1: \ - retval = __get_user_asm_b((void *)&x, \ - (long)ptr); \ - break; \ - case 2: \ - retval = __get_user_asm_w((void *)&x, \ - (long)ptr); \ - break; \ - case 4: \ - retval = __get_user_asm_l((void *)&x, \ - (long)ptr); \ - break; \ - case 8: \ - retval = __get_user_asm_q((void *)&x, \ - (long)ptr); \ - break; \ - default: \ - __get_user_unknown(); \ - break; \ - } \ -} while (0) - -extern long __get_user_asm_b(void *, long); -extern long __get_user_asm_w(void *, long); -extern long __get_user_asm_l(void *, long); -extern long __get_user_asm_q(void *, long); -extern void __get_user_unknown(void); - -#define __put_user_size(x,ptr,size,retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: \ - retval = __put_user_asm_b((void *)&x, \ - (__force long)ptr); \ - break; \ - case 2: \ - retval = __put_user_asm_w((void *)&x, \ - (__force long)ptr); \ - break; \ - case 4: \ - retval = __put_user_asm_l((void *)&x, \ - (__force long)ptr); \ - break; \ - case 8: \ - retval = __put_user_asm_q((void *)&x, \ - (__force long)ptr); \ - break; \ - default: \ - __put_user_unknown(); \ - } \ -} while (0) - -extern long __put_user_asm_b(void *, long); -extern long __put_user_asm_w(void *, long); -extern long __put_user_asm_l(void *, long); -extern long __put_user_asm_q(void *, long); -extern void __put_user_unknown(void); - -#endif /* __ASM_SH_UACCESS_64_H */ diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h index 9c7d9d9999c6..d6e126250136 100644 --- a/arch/sh/include/asm/unistd.h +++ b/arch/sh/include/asm/unistd.h @@ -1,9 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 */ -# ifdef CONFIG_SUPERH32 -# include -# else -# include -# endif +#include #define NR_syscalls __NR_syscalls diff --git a/arch/sh/include/asm/user.h b/arch/sh/include/asm/user.h index e97f2efed527..7dfd3f6461e6 100644 --- a/arch/sh/include/asm/user.h +++ b/arch/sh/include/asm/user.h @@ -28,19 +28,12 @@ * to write an integer number of pages. */ -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) -struct user_fpu_struct { - unsigned long fp_regs[32]; - unsigned int fpscr; -}; -#else struct user_fpu_struct { unsigned long fp_regs[16]; unsigned long xfp_regs[16]; unsigned long fpscr; unsigned long fpul; }; -#endif struct user { struct pt_regs regs; /* entire machine state */ diff --git a/arch/sh/include/asm/vermagic.h b/arch/sh/include/asm/vermagic.h index 13d8eaa9188e..5b2057c39170 100644 --- a/arch/sh/include/asm/vermagic.h +++ b/arch/sh/include/asm/vermagic.h @@ -10,8 +10,6 @@ # define MODULE_PROC_FAMILY "SH3LE " # elif defined CONFIG_CPU_SH4 # define MODULE_PROC_FAMILY "SH4LE " -# elif defined CONFIG_CPU_SH5 -# define MODULE_PROC_FAMILY "SH5LE " # else # error unknown processor family # endif @@ -22,8 +20,6 @@ # define MODULE_PROC_FAMILY "SH3BE " # elif defined CONFIG_CPU_SH4 # define MODULE_PROC_FAMILY "SH4BE " -# elif defined CONFIG_CPU_SH5 -# define MODULE_PROC_FAMILY "SH5BE " # else # error unknown processor family # endif diff --git a/arch/sh/include/asm/vmlinux.lds.h b/arch/sh/include/asm/vmlinux.lds.h index 992955685874..8d96c4f9b35b 100644 --- a/arch/sh/include/asm/vmlinux.lds.h +++ b/arch/sh/include/asm/vmlinux.lds.h @@ -15,12 +15,4 @@ #define DWARF_EH_FRAME #endif -#ifdef CONFIG_SUPERH64 -#define EXTRA_TEXT \ - *(.text64) \ - *(.text..SHmedia32) -#else -#define EXTRA_TEXT -#endif - #endif /* __ASM_SH_VMLINUX_LDS_H */ diff --git a/arch/sh/include/cpu-sh5/cpu/addrspace.h b/arch/sh/include/cpu-sh5/cpu/addrspace.h deleted file mode 100644 index 6dd1e72f31b2..000000000000 --- a/arch/sh/include/cpu-sh5/cpu/addrspace.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_SH_CPU_SH5_ADDRSPACE_H -#define __ASM_SH_CPU_SH5_ADDRSPACE_H - -#define PHYS_PERIPHERAL_BLOCK 0x09000000 -#define PHYS_DMAC_BLOCK 0x0e000000 -#define PHYS_PCI_BLOCK 0x60000000 -#define PHYS_EMI_BLOCK 0xff000000 - -/* No segmentation.. */ - -#endif /* __ASM_SH_CPU_SH5_ADDRSPACE_H */ diff --git a/arch/sh/include/cpu-sh5/cpu/cache.h b/arch/sh/include/cpu-sh5/cpu/cache.h deleted file mode 100644 index ef49538f386f..000000000000 --- a/arch/sh/include/cpu-sh5/cpu/cache.h +++ /dev/null @@ -1,94 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_SH_CPU_SH5_CACHE_H -#define __ASM_SH_CPU_SH5_CACHE_H - -/* - * include/asm-sh/cpu-sh5/cache.h - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - */ - -#define L1_CACHE_SHIFT 5 - -/* Valid and Dirty bits */ -#define SH_CACHE_VALID (1LL<<0) -#define SH_CACHE_UPDATED (1LL<<57) - -/* Unimplemented compat bits.. */ -#define SH_CACHE_COMBINED 0 -#define SH_CACHE_ASSOC 0 - -/* Cache flags */ -#define SH_CACHE_MODE_WT (1LL<<0) -#define SH_CACHE_MODE_WB (1LL<<1) - -/* - * Control Registers. - */ -#define ICCR_BASE 0x01600000 /* Instruction Cache Control Register */ -#define ICCR_REG0 0 /* Register 0 offset */ -#define ICCR_REG1 1 /* Register 1 offset */ -#define ICCR0 ICCR_BASE+ICCR_REG0 -#define ICCR1 ICCR_BASE+ICCR_REG1 - -#define ICCR0_OFF 0x0 /* Set ICACHE off */ -#define ICCR0_ON 0x1 /* Set ICACHE on */ -#define ICCR0_ICI 0x2 /* Invalidate all in IC */ - -#define ICCR1_NOLOCK 0x0 /* Set No Locking */ - -#define OCCR_BASE 0x01E00000 /* Operand Cache Control Register */ -#define OCCR_REG0 0 /* Register 0 offset */ -#define OCCR_REG1 1 /* Register 1 offset */ -#define OCCR0 OCCR_BASE+OCCR_REG0 -#define OCCR1 OCCR_BASE+OCCR_REG1 - -#define OCCR0_OFF 0x0 /* Set OCACHE off */ -#define OCCR0_ON 0x1 /* Set OCACHE on */ -#define OCCR0_OCI 0x2 /* Invalidate all in OC */ -#define OCCR0_WT 0x4 /* Set OCACHE in WT Mode */ -#define OCCR0_WB 0x0 /* Set OCACHE in WB Mode */ - -#define OCCR1_NOLOCK 0x0 /* Set No Locking */ - -/* - * SH-5 - * A bit of description here, for neff=32. - * - * |<--- tag (19 bits) --->| - * +-----------------------------+-----------------+------+----------+------+ - * | | | ways |set index |offset| - * +-----------------------------+-----------------+------+----------+------+ - * ^ 2 bits 8 bits 5 bits - * +- Bit 31 - * - * Cacheline size is based on offset: 5 bits = 32 bytes per line - * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG - * have a broader space for registers. These are outlined by - * CACHE_?C_*_STEP below. - * - */ - -/* Instruction cache */ -#define CACHE_IC_ADDRESS_ARRAY 0x01000000 - -/* Operand Cache */ -#define CACHE_OC_ADDRESS_ARRAY 0x01800000 - -/* These declarations relate to cache 'synonyms' in the operand cache. A - 'synonym' occurs where effective address bits overlap between those used for - indexing the cache sets and those passed to the MMU for translation. In the - case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */ - -#define CACHE_OC_N_SYNBITS 1 /* Number of synonym bits */ -#define CACHE_OC_SYN_SHIFT 12 -/* Mask to select synonym bit(s) */ -#define CACHE_OC_SYN_MASK (((1UL<). -** Assigns symbolic names to control & target registers. -*/ - -/* - * Define some useful aliases for control registers. - */ -#define SR cr0 -#define SSR cr1 -#define PSSR cr2 - /* cr3 UNDEFINED */ -#define INTEVT cr4 -#define EXPEVT cr5 -#define PEXPEVT cr6 -#define TRA cr7 -#define SPC cr8 -#define PSPC cr9 -#define RESVEC cr10 -#define VBR cr11 - /* cr12 UNDEFINED */ -#define TEA cr13 - /* cr14-cr15 UNDEFINED */ -#define DCR cr16 -#define KCR0 cr17 -#define KCR1 cr18 - /* cr19-cr31 UNDEFINED */ - /* cr32-cr61 RESERVED */ -#define CTC cr62 -#define USR cr63 - -/* - * ABI dependent registers (general purpose set) - */ -#define RET r2 -#define ARG1 r2 -#define ARG2 r3 -#define ARG3 r4 -#define ARG4 r5 -#define ARG5 r6 -#define ARG6 r7 -#define SP r15 -#define LINK r18 -#define ZERO r63 - -/* - * Status register defines: used only by assembly sources (and - * syntax independednt) - */ -#define SR_RESET_VAL 0x0000000050008000 -#define SR_HARMLESS 0x00000000500080f0 /* Write ignores for most */ -#define SR_ENABLE_FPU 0xffffffffffff7fff /* AND with this */ - -#if defined (CONFIG_SH64_SR_WATCH) -#define SR_ENABLE_MMU 0x0000000084000000 /* OR with this */ -#else -#define SR_ENABLE_MMU 0x0000000080000000 /* OR with this */ -#endif - -#define SR_UNBLOCK_EXC 0xffffffffefffffff /* AND with this */ -#define SR_BLOCK_EXC 0x0000000010000000 /* OR with this */ - -#else /* Not __ASSEMBLY__ syntax */ - -/* -** Stringify reg. name -*/ -#define __str(x) #x - -/* Stringify control register names for use in inline assembly */ -#define __SR __str(SR) -#define __SSR __str(SSR) -#define __PSSR __str(PSSR) -#define __INTEVT __str(INTEVT) -#define __EXPEVT __str(EXPEVT) -#define __PEXPEVT __str(PEXPEVT) -#define __TRA __str(TRA) -#define __SPC __str(SPC) -#define __PSPC __str(PSPC) -#define __RESVEC __str(RESVEC) -#define __VBR __str(VBR) -#define __TEA __str(TEA) -#define __DCR __str(DCR) -#define __KCR0 __str(KCR0) -#define __KCR1 __str(KCR1) -#define __CTC __str(CTC) -#define __USR __str(USR) - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_SH_CPU_SH5_REGISTERS_H */ diff --git a/arch/sh/include/cpu-sh5/cpu/rtc.h b/arch/sh/include/cpu-sh5/cpu/rtc.h deleted file mode 100644 index d7e25d435f4a..000000000000 --- a/arch/sh/include/cpu-sh5/cpu/rtc.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_SH_CPU_SH5_RTC_H -#define __ASM_SH_CPU_SH5_RTC_H - -#define rtc_reg_size sizeof(u32) -#define RTC_BIT_INVERTED 0 /* The SH-5 RTC is surprisingly sane! */ -#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR - -#endif /* __ASM_SH_CPU_SH5_RTC_H */ diff --git a/arch/sh/include/uapi/asm/posix_types.h b/arch/sh/include/uapi/asm/posix_types.h index 2644fdd444e6..adc998a64c76 100644 --- a/arch/sh/include/uapi/asm/posix_types.h +++ b/arch/sh/include/uapi/asm/posix_types.h @@ -1,8 +1,2 @@ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef __KERNEL__ -# ifdef __SH5__ -# include -# else -# include -# endif -#endif /* __KERNEL__ */ +#include diff --git a/arch/sh/include/uapi/asm/posix_types_64.h b/arch/sh/include/uapi/asm/posix_types_64.h deleted file mode 100644 index 3a9128d4aee3..000000000000 --- a/arch/sh/include/uapi/asm/posix_types_64.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef __ASM_SH_POSIX_TYPES_64_H -#define __ASM_SH_POSIX_TYPES_64_H - -typedef unsigned short __kernel_mode_t; -#define __kernel_mode_t __kernel_mode_t -typedef unsigned short __kernel_ipc_pid_t; -#define __kernel_ipc_pid_t __kernel_ipc_pid_t -typedef unsigned short __kernel_uid_t; -#define __kernel_uid_t __kernel_uid_t -typedef unsigned short __kernel_gid_t; -#define __kernel_gid_t __kernel_gid_t -typedef long unsigned int __kernel_size_t; -#define __kernel_size_t __kernel_size_t -typedef int __kernel_ssize_t; -#define __kernel_ssize_t __kernel_ssize_t -typedef int __kernel_ptrdiff_t; -#define __kernel_ptrdiff_t __kernel_ptrdiff_t - -typedef unsigned short __kernel_old_uid_t; -#define __kernel_old_uid_t __kernel_old_uid_t -typedef unsigned short __kernel_old_gid_t; -#define __kernel_old_gid_t __kernel_old_gid_t -typedef unsigned short __kernel_old_dev_t; -#define __kernel_old_dev_t __kernel_old_dev_t - -#include - -#endif /* __ASM_SH_POSIX_TYPES_64_H */ diff --git a/arch/sh/include/uapi/asm/ptrace.h b/arch/sh/include/uapi/asm/ptrace.h index 4ec9c2b65fdb..5c88e46b7773 100644 --- a/arch/sh/include/uapi/asm/ptrace.h +++ b/arch/sh/include/uapi/asm/ptrace.h @@ -25,11 +25,6 @@ #define PT_DATA_ADDR 248 /* &(struct user)->start_data */ #define PT_TEXT_LEN 252 -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) -#include -#else #include -#endif - #endif /* _UAPI__ASM_SH_PTRACE_H */ diff --git a/arch/sh/include/uapi/asm/ptrace_64.h b/arch/sh/include/uapi/asm/ptrace_64.h deleted file mode 100644 index a6f84eba5277..000000000000 --- a/arch/sh/include/uapi/asm/ptrace_64.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _UAPI__ASM_SH_PTRACE_64_H -#define _UAPI__ASM_SH_PTRACE_64_H - -struct pt_regs { - unsigned long long pc; - unsigned long long sr; - long long syscall_nr; - unsigned long long regs[63]; - unsigned long long tregs[8]; - unsigned long long pad[2]; -}; - - -#endif /* _UAPI__ASM_SH_PTRACE_64_H */ diff --git a/arch/sh/include/uapi/asm/sigcontext.h b/arch/sh/include/uapi/asm/sigcontext.h index d2b7e4f033c0..a9cc8bad0f36 100644 --- a/arch/sh/include/uapi/asm/sigcontext.h +++ b/arch/sh/include/uapi/asm/sigcontext.h @@ -5,18 +5,6 @@ struct sigcontext { unsigned long oldmask; -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) - /* CPU registers */ - unsigned long long sc_regs[63]; - unsigned long long sc_tregs[8]; - unsigned long long sc_pc; - unsigned long long sc_sr; - - /* FPU registers */ - unsigned long long sc_fpregs[32]; - unsigned int sc_fpscr; - unsigned int sc_fpvalid; -#else /* CPU registers */ unsigned long sc_regs[16]; unsigned long sc_pc; @@ -32,7 +20,6 @@ struct sigcontext { unsigned int sc_fpscr; unsigned int sc_fpul; unsigned int sc_ownedfp; -#endif }; #endif /* __ASM_SH_SIGCONTEXT_H */ diff --git a/arch/sh/include/uapi/asm/stat.h b/arch/sh/include/uapi/asm/stat.h index 659b87c7c25a..b0ca755ea08d 100644 --- a/arch/sh/include/uapi/asm/stat.h +++ b/arch/sh/include/uapi/asm/stat.h @@ -16,66 +16,6 @@ struct __old_kernel_stat { unsigned long st_ctime; }; -#if defined(__SH5__) || defined(CONFIG_CPU_SH5) -struct stat { - unsigned short st_dev; - unsigned short __pad1; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned short __pad2; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; -}; - -/* This matches struct stat64 in glibc2.1, hence the absolutely - * insane amounts of padding around dev_t's. - */ -struct stat64 { - unsigned short st_dev; - unsigned char __pad0[10]; - - unsigned long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned short st_rdev; - unsigned char __pad3[10]; - - long long st_size; - unsigned long st_blksize; - - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long __pad4; /* future possible st_blocks high bits */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ - - unsigned long __unused1; - unsigned long __unused2; -}; -#else struct stat { unsigned long st_dev; unsigned long st_ino; @@ -134,6 +74,5 @@ struct stat64 { }; #define STAT_HAVE_NSEC 1 -#endif #endif /* __ASM_SH_STAT_H */ diff --git a/arch/sh/include/uapi/asm/swab.h b/arch/sh/include/uapi/asm/swab.h index f0b02152745c..c727d381a30a 100644 --- a/arch/sh/include/uapi/asm/swab.h +++ b/arch/sh/include/uapi/asm/swab.h @@ -13,14 +13,9 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x) { __asm__( -#ifdef __SH5__ - "byterev %1, %0\n\t" - "shari %0, 32, %0" -#else "swap.b %1, %0\n\t" "swap.w %0, %0\n\t" "swap.b %0, %0" -#endif : "=r" (x) : "r" (x)); @@ -31,12 +26,7 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x) static inline __attribute_const__ __u16 __arch_swab16(__u16 x) { __asm__( -#ifdef __SH5__ - "byterev %1, %0\n\t" - "shari %0, 32, %0" -#else "swap.b %1, %0" -#endif : "=r" (x) : "r" (x)); diff --git a/arch/sh/include/uapi/asm/unistd.h b/arch/sh/include/uapi/asm/unistd.h index 9e0b4e5e6da2..0f7c7772a2fb 100644 --- a/arch/sh/include/uapi/asm/unistd.h +++ b/arch/sh/include/uapi/asm/unistd.h @@ -1,8 +1,2 @@ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef __KERNEL__ -# ifdef __SH5__ -# include -# else -# include -# endif -#endif +#include diff --git a/arch/sh/include/uapi/asm/unistd_64.h b/arch/sh/include/uapi/asm/unistd_64.h deleted file mode 100644 index 75da54851f02..000000000000 --- a/arch/sh/include/uapi/asm/unistd_64.h +++ /dev/null @@ -1,423 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef __ASM_SH_UNISTD_64_H -#define __ASM_SH_UNISTD_64_H - -/* - * include/asm-sh/unistd_64.h - * - * This file contains the system call numbers. - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 - 2007 Paul Mundt - * Copyright (C) 2004 Sean McGoogan - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 - /* 17 was sys_break */ -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 - /* 31 was sys_stty */ - /* 32 was sys_gtty */ -#define __NR_access 33 -#define __NR_nice 34 - /* 35 was sys_ftime */ -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 - /* 44 was sys_prof */ -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 - /* 53 was sys_lock */ -#define __NR_ioctl 54 -#define __NR_fcntl 55 - /* 56 was sys_mpx */ -#define __NR_setpgid 57 - /* 58 was sys_ulimit */ - /* 59 was sys_olduname */ -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 - /* 82 was sys_select */ -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 - /* 98 was sys_profil */ -#define __NR_statfs 99 -#define __NR_fstatfs 100 - /* 101 was sys_ioperm */ -#define __NR_socketcall 102 /* old implementation of socket systemcall */ -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_olduname 109 - /* 110 was sys_iopl */ -#define __NR_vhangup 111 - /* 112 was sys_idle */ - /* 113 was sys_vm86old */ -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_cacheflush 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 - /* 127 was sys_create_module */ -#define __NR_init_module 128 -#define __NR_delete_module 129 - /* 130 was sys_get_kernel_syms */ -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 - /* 137 was sys_afs_syscall */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 - /* 166 was sys_vm86 */ - /* 167 was sys_query_module */ -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 - /* 188 reserved for getpmsg */ - /* 189 reserved for putpmsg */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 - -/* Non-multiplexed socket family */ -#define __NR_socket 220 -#define __NR_bind 221 -#define __NR_connect 222 -#define __NR_listen 223 -#define __NR_accept 224 -#define __NR_getsockname 225 -#define __NR_getpeername 226 -#define __NR_socketpair 227 -#define __NR_send 228 -#define __NR_sendto 229 -#define __NR_recv 230 -#define __NR_recvfrom 231 -#define __NR_shutdown 232 -#define __NR_setsockopt 233 -#define __NR_getsockopt 234 -#define __NR_sendmsg 235 -#define __NR_recvmsg 236 - -/* Non-multiplexed IPC family */ -#define __NR_semop 237 -#define __NR_semget 238 -#define __NR_semctl 239 -#define __NR_msgsnd 240 -#define __NR_msgrcv 241 -#define __NR_msgget 242 -#define __NR_msgctl 243 -#define __NR_shmat 244 -#define __NR_shmdt 245 -#define __NR_shmget 246 -#define __NR_shmctl 247 - -#define __NR_getdents64 248 -#define __NR_fcntl64 249 - /* 250 is reserved for tux */ - /* 251 is unused */ -#define __NR_gettid 252 -#define __NR_readahead 253 -#define __NR_setxattr 254 -#define __NR_lsetxattr 255 -#define __NR_fsetxattr 256 -#define __NR_getxattr 257 -#define __NR_lgetxattr 258 -#define __NR_fgetxattr 259 -#define __NR_listxattr 260 -#define __NR_llistxattr 261 -#define __NR_flistxattr 262 -#define __NR_removexattr 263 -#define __NR_lremovexattr 264 -#define __NR_fremovexattr 265 -#define __NR_tkill 266 -#define __NR_sendfile64 267 -#define __NR_futex 268 -#define __NR_sched_setaffinity 269 -#define __NR_sched_getaffinity 270 - /* 271 is reserved for set_thread_area */ - /* 272 is reserved for get_thread_area */ -#define __NR_io_setup 273 -#define __NR_io_destroy 274 -#define __NR_io_getevents 275 -#define __NR_io_submit 276 -#define __NR_io_cancel 277 -#define __NR_fadvise64 278 - /* 279 is unused */ -#define __NR_exit_group 280 - -#define __NR_lookup_dcookie 281 -#define __NR_epoll_create 282 -#define __NR_epoll_ctl 283 -#define __NR_epoll_wait 284 -#define __NR_remap_file_pages 285 -#define __NR_set_tid_address 286 -#define __NR_timer_create 287 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 296 -#define __NR_fstatfs64 297 -#define __NR_tgkill 298 -#define __NR_utimes 299 -#define __NR_fadvise64_64 300 - /* 301 is reserved for vserver */ - /* 302 is reserved for mbind */ - /* 303 is reserved for get_mempolicy */ - /* 304 is reserved for set_mempolicy */ -#define __NR_mq_open 305 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) - /* 311 is reserved for kexec */ -#define __NR_waitid 312 -#define __NR_add_key 313 -#define __NR_request_key 314 -#define __NR_keyctl 315 -#define __NR_ioprio_set 316 -#define __NR_ioprio_get 317 -#define __NR_inotify_init 318 -#define __NR_inotify_add_watch 319 -#define __NR_inotify_rm_watch 320 - /* 321 is unused */ -#define __NR_migrate_pages 322 -#define __NR_openat 323 -#define __NR_mkdirat 324 -#define __NR_mknodat 325 -#define __NR_fchownat 326 -#define __NR_futimesat 327 -#define __NR_fstatat64 328 -#define __NR_unlinkat 329 -#define __NR_renameat 330 -#define __NR_linkat 331 -#define __NR_symlinkat 332 -#define __NR_readlinkat 333 -#define __NR_fchmodat 334 -#define __NR_faccessat 335 -#define __NR_pselect6 336 -#define __NR_ppoll 337 -#define __NR_unshare 338 -#define __NR_set_robust_list 339 -#define __NR_get_robust_list 340 -#define __NR_splice 341 -#define __NR_sync_file_range 342 -#define __NR_tee 343 -#define __NR_vmsplice 344 -#define __NR_move_pages 345 -#define __NR_getcpu 346 -#define __NR_epoll_pwait 347 -#define __NR_utimensat 348 -#define __NR_signalfd 349 -#define __NR_timerfd_create 350 -#define __NR_eventfd 351 -#define __NR_fallocate 352 -#define __NR_timerfd_settime 353 -#define __NR_timerfd_gettime 354 -#define __NR_signalfd4 355 -#define __NR_eventfd2 356 -#define __NR_epoll_create1 357 -#define __NR_dup3 358 -#define __NR_pipe2 359 -#define __NR_inotify_init1 360 -#define __NR_preadv 361 -#define __NR_pwritev 362 -#define __NR_rt_tgsigqueueinfo 363 -#define __NR_perf_event_open 364 -#define __NR_recvmmsg 365 -#define __NR_accept4 366 -#define __NR_fanotify_init 367 -#define __NR_fanotify_mark 368 -#define __NR_prlimit64 369 -#define __NR_name_to_handle_at 370 -#define __NR_open_by_handle_at 371 -#define __NR_clock_adjtime 372 -#define __NR_syncfs 373 -#define __NR_sendmmsg 374 -#define __NR_setns 375 -#define __NR_process_vm_readv 376 -#define __NR_process_vm_writev 377 -#define __NR_kcmp 378 -#define __NR_finit_module 379 -#define __NR_sched_getattr 380 -#define __NR_sched_setattr 381 -#define __NR_renameat2 382 -#define __NR_seccomp 383 -#define __NR_getrandom 384 -#define __NR_memfd_create 385 -#define __NR_bpf 386 -#define __NR_execveat 387 -#define __NR_userfaultfd 388 -#define __NR_membarrier 389 -#define __NR_mlock2 390 -#define __NR_copy_file_range 391 -#define __NR_preadv2 392 -#define __NR_pwritev2 393 - -#ifdef __KERNEL__ -#define __NR_syscalls 394 -#endif - -#endif /* __ASM_SH_UNISTD_64_H */ diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 59673f8a3379..b0f5574b6228 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -3,7 +3,7 @@ # Makefile for the Linux/SuperH kernel. # -extra-y := head_$(BITS).o vmlinux.lds +extra-y := head_32.o vmlinux.lds ifdef CONFIG_FUNCTION_TRACER # Do not profile debug and lowlevel utilities @@ -13,26 +13,26 @@ endif CFLAGS_REMOVE_return_address.o = -pg obj-y := debugtraps.o dumpstack.o \ - idle.o io.o irq.o irq_$(BITS).o kdebugfs.o \ + idle.o io.o irq.o irq_32.o kdebugfs.o \ machvec.o nmi_debug.o process.o \ - process_$(BITS).o ptrace.o ptrace_$(BITS).o \ + process_32.o ptrace.o ptrace_32.o \ reboot.o return_address.o \ - setup.o signal_$(BITS).o sys_sh.o \ - syscalls_$(BITS).o time.o topology.o traps.o \ - traps_$(BITS).o unwinder.o + setup.o signal_32.o sys_sh.o \ + syscalls_32.o time.o topology.o traps.o \ + traps_32.o unwinder.o ifndef CONFIG_GENERIC_IOMAP obj-y += iomap.o obj-$(CONFIG_HAS_IOPORT_MAP) += ioport.o endif -obj-$(CONFIG_SUPERH32) += sys_sh32.o +obj-y += sys_sh32.o obj-y += cpu/ obj-$(CONFIG_VSYSCALL) += vsyscall/ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o obj-$(CONFIG_KGDB) += kgdb.o -obj-$(CONFIG_MODULES) += sh_ksyms_$(BITS).o module.o +obj-$(CONFIG_MODULES) += sh_ksyms_32.o module.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_STACKTRACE) += stacktrace.o diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile index f7c22ea98b0f..46118236bf04 100644 --- a/arch/sh/kernel/cpu/Makefile +++ b/arch/sh/kernel/cpu/Makefile @@ -7,7 +7,6 @@ obj-$(CONFIG_CPU_SH2) = sh2/ obj-$(CONFIG_CPU_SH2A) = sh2a/ obj-$(CONFIG_CPU_SH3) = sh3/ obj-$(CONFIG_CPU_SH4) = sh4/ -obj-$(CONFIG_CPU_SH5) = sh5/ # Special cases for family ancestry. diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index ce7291e12a30..1d008745877f 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -103,7 +103,7 @@ void __attribute__ ((weak)) l2_cache_init(void) /* * Generic first-level cache init */ -#if defined(CONFIG_SUPERH32) && !defined(CONFIG_CPU_J2) +#if !defined(CONFIG_CPU_J2) static void cache_init(void) { unsigned long ccr, flags; diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile index 8b91cb96411b..e4578cde46ba 100644 --- a/arch/sh/kernel/cpu/irq/Makefile +++ b/arch/sh/kernel/cpu/irq/Makefile @@ -2,6 +2,5 @@ # # Makefile for the Linux/SuperH CPU-specific IRQ handlers. # -obj-$(CONFIG_SUPERH32) += imask.o -obj-$(CONFIG_CPU_SH5) += intc-sh5.o +obj-y += imask.o obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c deleted file mode 100644 index 1b3050facda8..000000000000 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ /dev/null @@ -1,194 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/sh/kernel/cpu/irq/intc-sh5.c - * - * Interrupt Controller support for SH5 INTC. - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Paul Mundt - * - * Per-interrupt selective. IRLM=0 (Fixed priority) is not - * supported being useless without a cascaded interrupt - * controller. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Maybe the generic Peripheral block could move to a more - * generic include file. INTC Block will be defined here - * and only here to make INTC self-contained in a single - * file. - */ -#define INTC_BLOCK_OFFSET 0x01000000 - -/* Base */ -#define INTC_BASE PHYS_PERIPHERAL_BLOCK + \ - INTC_BLOCK_OFFSET - -/* Address */ -#define INTC_ICR_SET (intc_virt + 0x0) -#define INTC_ICR_CLEAR (intc_virt + 0x8) -#define INTC_INTPRI_0 (intc_virt + 0x10) -#define INTC_INTSRC_0 (intc_virt + 0x50) -#define INTC_INTSRC_1 (intc_virt + 0x58) -#define INTC_INTREQ_0 (intc_virt + 0x60) -#define INTC_INTREQ_1 (intc_virt + 0x68) -#define INTC_INTENB_0 (intc_virt + 0x70) -#define INTC_INTENB_1 (intc_virt + 0x78) -#define INTC_INTDSB_0 (intc_virt + 0x80) -#define INTC_INTDSB_1 (intc_virt + 0x88) - -#define INTC_ICR_IRLM 0x1 -#define INTC_INTPRI_PREGS 8 /* 8 Priority Registers */ -#define INTC_INTPRI_PPREG 8 /* 8 Priorities per Register */ - - -/* - * Mapper between the vector ordinal and the IRQ number - * passed to kernel/device drivers. - */ -int intc_evt_to_irq[(0xE20/0x20)+1] = { - -1, -1, -1, -1, -1, -1, -1, -1, /* 0x000 - 0x0E0 */ - -1, -1, -1, -1, -1, -1, -1, -1, /* 0x100 - 0x1E0 */ - 0, 0, 0, 0, 0, 1, 0, 0, /* 0x200 - 0x2E0 */ - 2, 0, 0, 3, 0, 0, 0, -1, /* 0x300 - 0x3E0 */ - 32, 33, 34, 35, 36, 37, 38, -1, /* 0x400 - 0x4E0 */ - -1, -1, -1, 63, -1, -1, -1, -1, /* 0x500 - 0x5E0 */ - -1, -1, 18, 19, 20, 21, 22, -1, /* 0x600 - 0x6E0 */ - 39, 40, 41, 42, -1, -1, -1, -1, /* 0x700 - 0x7E0 */ - 4, 5, 6, 7, -1, -1, -1, -1, /* 0x800 - 0x8E0 */ - -1, -1, -1, -1, -1, -1, -1, -1, /* 0x900 - 0x9E0 */ - 12, 13, 14, 15, 16, 17, -1, -1, /* 0xA00 - 0xAE0 */ - -1, -1, -1, -1, -1, -1, -1, -1, /* 0xB00 - 0xBE0 */ - -1, -1, -1, -1, -1, -1, -1, -1, /* 0xC00 - 0xCE0 */ - -1, -1, -1, -1, -1, -1, -1, -1, /* 0xD00 - 0xDE0 */ - -1, -1 /* 0xE00 - 0xE20 */ -}; - -static unsigned long intc_virt; -static int irlm; /* IRL mode */ - -static void enable_intc_irq(struct irq_data *data) -{ - unsigned int irq = data->irq; - unsigned long reg; - unsigned long bitmask; - - if ((irq <= IRQ_IRL3) && (irlm == NO_PRIORITY)) - printk("Trying to use straight IRL0-3 with an encoding platform.\n"); - - if (irq < 32) { - reg = INTC_INTENB_0; - bitmask = 1 << irq; - } else { - reg = INTC_INTENB_1; - bitmask = 1 << (irq - 32); - } - - __raw_writel(bitmask, reg); -} - -static void disable_intc_irq(struct irq_data *data) -{ - unsigned int irq = data->irq; - unsigned long reg; - unsigned long bitmask; - - if (irq < 32) { - reg = INTC_INTDSB_0; - bitmask = 1 << irq; - } else { - reg = INTC_INTDSB_1; - bitmask = 1 << (irq - 32); - } - - __raw_writel(bitmask, reg); -} - -static struct irq_chip intc_irq_type = { - .name = "INTC", - .irq_enable = enable_intc_irq, - .irq_disable = disable_intc_irq, -}; - -void __init plat_irq_setup(void) -{ - unsigned long long __dummy0, __dummy1=~0x00000000100000f0; - unsigned long reg; - int i; - - intc_virt = (unsigned long)ioremap(INTC_BASE, 1024); - if (!intc_virt) { - panic("Unable to remap INTC\n"); - } - - - /* Set default: per-line enable/disable, priority driven ack/eoi */ - for (i = 0; i < NR_INTC_IRQS; i++) - irq_set_chip_and_handler(i, &intc_irq_type, handle_level_irq); - - - /* Disable all interrupts and set all priorities to 0 to avoid trouble */ - __raw_writel(-1, INTC_INTDSB_0); - __raw_writel(-1, INTC_INTDSB_1); - - for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8) - __raw_writel( NO_PRIORITY, reg); - - -#ifdef CONFIG_SH_CAYMAN - { - unsigned long data; - - /* Set IRLM */ - /* If all the priorities are set to 'no priority', then - * assume we are using encoded mode. - */ - irlm = platform_int_priority[IRQ_IRL0] + - platform_int_priority[IRQ_IRL1] + - platform_int_priority[IRQ_IRL2] + - platform_int_priority[IRQ_IRL3]; - if (irlm == NO_PRIORITY) { - /* IRLM = 0 */ - reg = INTC_ICR_CLEAR; - i = IRQ_INTA; - printk("Trying to use encoded IRL0-3. IRLs unsupported.\n"); - } else { - /* IRLM = 1 */ - reg = INTC_ICR_SET; - i = IRQ_IRL0; - } - __raw_writel(INTC_ICR_IRLM, reg); - - /* Set interrupt priorities according to platform description */ - for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) { - data |= platform_int_priority[i] << - ((i % INTC_INTPRI_PPREG) * 4); - if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) { - /* Upon the 7th, set Priority Register */ - __raw_writel(data, reg); - data = 0; - reg += 8; - } - } - } -#endif - - /* - * And now let interrupts come in. - * sti() is not enough, we need to - * lower priority, too. - */ - __asm__ __volatile__("getcon " __SR ", %0\n\t" - "and %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy0) - : "r" (__dummy1)); -} diff --git a/arch/sh/kernel/cpu/proc.c b/arch/sh/kernel/cpu/proc.c index 85961b4f9c69..a306bcd6b341 100644 --- a/arch/sh/kernel/cpu/proc.c +++ b/arch/sh/kernel/cpu/proc.c @@ -24,7 +24,6 @@ static const char *cpu_name[] = { [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785", [CPU_SH7786] = "SH7786", [CPU_SH7757] = "SH7757", [CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3", - [CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103", [CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723", [CPU_SH7366] = "SH7366", [CPU_SH7724] = "SH7724", [CPU_SH7372] = "SH7372", [CPU_SH7734] = "SH7734", diff --git a/arch/sh/kernel/cpu/sh5/Makefile b/arch/sh/kernel/cpu/sh5/Makefile deleted file mode 100644 index 97d23ec3005f..000000000000 --- a/arch/sh/kernel/cpu/sh5/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the Linux/SuperH SH-5 backends. -# -obj-y := entry.o probe.o switchto.o - -obj-$(CONFIG_SH_FPU) += fpu.o -obj-$(CONFIG_KALLSYMS) += unwind.o - -# CPU subtype setup -obj-$(CONFIG_CPU_SH5) += setup-sh5.o - -# Primary on-chip clocks (common) -clock-$(CONFIG_CPU_SH5) := clock-sh5.o - -obj-y += $(clock-y) diff --git a/arch/sh/kernel/cpu/sh5/clock-sh5.c b/arch/sh/kernel/cpu/sh5/clock-sh5.c deleted file mode 100644 index dee6be2c2344..000000000000 --- a/arch/sh/kernel/cpu/sh5/clock-sh5.c +++ /dev/null @@ -1,76 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/sh/kernel/cpu/sh5/clock-sh5.c - * - * SH-5 support for the clock framework - * - * Copyright (C) 2008 Paul Mundt - */ -#include -#include -#include -#include - -static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 }; - -/* Clock, Power and Reset Controller */ -#define CPRC_BLOCK_OFF 0x01010000 -#define CPRC_BASE (PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF) - -static unsigned long cprc_base; - -static void master_clk_init(struct clk *clk) -{ - int idx = (__raw_readl(cprc_base + 0x00) >> 6) & 0x0007; - clk->rate *= ifc_table[idx]; -} - -static struct sh_clk_ops sh5_master_clk_ops = { - .init = master_clk_init, -}; - -static unsigned long module_clk_recalc(struct clk *clk) -{ - int idx = (__raw_readw(cprc_base) >> 12) & 0x0007; - return clk->parent->rate / ifc_table[idx]; -} - -static struct sh_clk_ops sh5_module_clk_ops = { - .recalc = module_clk_recalc, -}; - -static unsigned long bus_clk_recalc(struct clk *clk) -{ - int idx = (__raw_readw(cprc_base) >> 3) & 0x0007; - return clk->parent->rate / ifc_table[idx]; -} - -static struct sh_clk_ops sh5_bus_clk_ops = { - .recalc = bus_clk_recalc, -}; - -static unsigned long cpu_clk_recalc(struct clk *clk) -{ - int idx = (__raw_readw(cprc_base) & 0x0007); - return clk->parent->rate / ifc_table[idx]; -} - -static struct sh_clk_ops sh5_cpu_clk_ops = { - .recalc = cpu_clk_recalc, -}; - -static struct sh_clk_ops *sh5_clk_ops[] = { - &sh5_master_clk_ops, - &sh5_module_clk_ops, - &sh5_bus_clk_ops, - &sh5_cpu_clk_ops, -}; - -void __init arch_init_clk_ops(struct sh_clk_ops **ops, int idx) -{ - cprc_base = (unsigned long)ioremap(CPRC_BASE, 1024); - BUG_ON(!cprc_base); - - if (idx < ARRAY_SIZE(sh5_clk_ops)) - *ops = sh5_clk_ops[idx]; -} diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S deleted file mode 100644 index 81c8b64b977f..000000000000 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ /dev/null @@ -1,2000 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * arch/sh/kernel/cpu/sh5/entry.S - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2004 - 2008 Paul Mundt - * Copyright (C) 2003, 2004 Richard Curnow - */ -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * SR fields. - */ -#define SR_ASID_MASK 0x00ff0000 -#define SR_FD_MASK 0x00008000 -#define SR_SS 0x08000000 -#define SR_BL 0x10000000 -#define SR_MD 0x40000000 - -/* - * Event code. - */ -#define EVENT_INTERRUPT 0 -#define EVENT_FAULT_TLB 1 -#define EVENT_FAULT_NOT_TLB 2 -#define EVENT_DEBUG 3 - -/* EXPEVT values */ -#define RESET_CAUSE 0x20 -#define DEBUGSS_CAUSE 0x980 - -/* - * Frame layout. Quad index. - */ -#define FRAME_T(x) FRAME_TBASE+(x*8) -#define FRAME_R(x) FRAME_RBASE+(x*8) -#define FRAME_S(x) FRAME_SBASE+(x*8) -#define FSPC 0 -#define FSSR 1 -#define FSYSCALL_ID 2 - -/* Arrange the save frame to be a multiple of 32 bytes long */ -#define FRAME_SBASE 0 -#define FRAME_RBASE (FRAME_SBASE+(3*8)) /* SYSCALL_ID - SSR - SPC */ -#define FRAME_TBASE (FRAME_RBASE+(63*8)) /* r0 - r62 */ -#define FRAME_PBASE (FRAME_TBASE+(8*8)) /* tr0 -tr7 */ -#define FRAME_SIZE (FRAME_PBASE+(2*8)) /* pad0-pad1 */ - -#define FP_FRAME_SIZE FP_FRAME_BASE+(33*8) /* dr0 - dr31 + fpscr */ -#define FP_FRAME_BASE 0 - -#define SAVED_R2 0*8 -#define SAVED_R3 1*8 -#define SAVED_R4 2*8 -#define SAVED_R5 3*8 -#define SAVED_R18 4*8 -#define SAVED_R6 5*8 -#define SAVED_TR0 6*8 - -/* These are the registers saved in the TLB path that aren't saved in the first - level of the normal one. */ -#define TLB_SAVED_R25 7*8 -#define TLB_SAVED_TR1 8*8 -#define TLB_SAVED_TR2 9*8 -#define TLB_SAVED_TR3 10*8 -#define TLB_SAVED_TR4 11*8 -/* Save R0/R1 : PT-migrating compiler currently dishounours -ffixed-r0 and -ffixed-r1 causing - breakage otherwise. */ -#define TLB_SAVED_R0 12*8 -#define TLB_SAVED_R1 13*8 - -#define CLI() \ - getcon SR, r6; \ - ori r6, 0xf0, r6; \ - putcon r6, SR; - -#define STI() \ - getcon SR, r6; \ - andi r6, ~0xf0, r6; \ - putcon r6, SR; - -#ifdef CONFIG_PREEMPTION -# define preempt_stop() CLI() -#else -# define preempt_stop() -# define resume_kernel restore_all -#endif - - .section .data, "aw" - -#define FAST_TLBMISS_STACK_CACHELINES 4 -#define FAST_TLBMISS_STACK_QUADWORDS (4*FAST_TLBMISS_STACK_CACHELINES) - -/* Register back-up area for all exceptions */ - .balign 32 - /* Allow for 16 quadwords to be pushed by fast tlbmiss handling - * register saves etc. */ - .fill FAST_TLBMISS_STACK_QUADWORDS, 8, 0x0 -/* This is 32 byte aligned by construction */ -/* Register back-up area for all exceptions */ -reg_save_area: - .quad 0 - .quad 0 - .quad 0 - .quad 0 - - .quad 0 - .quad 0 - .quad 0 - .quad 0 - - .quad 0 - .quad 0 - .quad 0 - .quad 0 - - .quad 0 - .quad 0 - -/* Save area for RESVEC exceptions. We cannot use reg_save_area because of - * reentrancy. Note this area may be accessed via physical address. - * Align so this fits a whole single cache line, for ease of purging. - */ - .balign 32,0,32 -resvec_save_area: - .quad 0 - .quad 0 - .quad 0 - .quad 0 - .quad 0 - .balign 32,0,32 - -/* Jump table of 3rd level handlers */ -trap_jtable: - .long do_exception_error /* 0x000 */ - .long do_exception_error /* 0x020 */ -#ifdef CONFIG_MMU - .long tlb_miss_load /* 0x040 */ - .long tlb_miss_store /* 0x060 */ -#else - .long do_exception_error - .long do_exception_error -#endif - ! ARTIFICIAL pseudo-EXPEVT setting - .long do_debug_interrupt /* 0x080 */ -#ifdef CONFIG_MMU - .long tlb_miss_load /* 0x0A0 */ - .long tlb_miss_store /* 0x0C0 */ -#else - .long do_exception_error - .long do_exception_error -#endif - .long do_address_error_load /* 0x0E0 */ - .long do_address_error_store /* 0x100 */ -#ifdef CONFIG_SH_FPU - .long do_fpu_error /* 0x120 */ -#else - .long do_exception_error /* 0x120 */ -#endif - .long do_exception_error /* 0x140 */ - .long system_call /* 0x160 */ - .long do_reserved_inst /* 0x180 */ - .long do_illegal_slot_inst /* 0x1A0 */ - .long do_exception_error /* 0x1C0 - NMI */ - .long do_exception_error /* 0x1E0 */ - .rept 15 - .long do_IRQ /* 0x200 - 0x3C0 */ - .endr - .long do_exception_error /* 0x3E0 */ - .rept 32 - .long do_IRQ /* 0x400 - 0x7E0 */ - .endr - .long fpu_error_or_IRQA /* 0x800 */ - .long fpu_error_or_IRQB /* 0x820 */ - .long do_IRQ /* 0x840 */ - .long do_IRQ /* 0x860 */ - .rept 6 - .long do_exception_error /* 0x880 - 0x920 */ - .endr - .long breakpoint_trap_handler /* 0x940 */ - .long do_exception_error /* 0x960 */ - .long do_single_step /* 0x980 */ - - .rept 3 - .long do_exception_error /* 0x9A0 - 0x9E0 */ - .endr - .long do_IRQ /* 0xA00 */ - .long do_IRQ /* 0xA20 */ -#ifdef CONFIG_MMU - .long itlb_miss_or_IRQ /* 0xA40 */ -#else - .long do_IRQ -#endif - .long do_IRQ /* 0xA60 */ - .long do_IRQ /* 0xA80 */ -#ifdef CONFIG_MMU - .long itlb_miss_or_IRQ /* 0xAA0 */ -#else - .long do_IRQ -#endif - .long do_exception_error /* 0xAC0 */ - .long do_address_error_exec /* 0xAE0 */ - .rept 8 - .long do_exception_error /* 0xB00 - 0xBE0 */ - .endr - .rept 18 - .long do_IRQ /* 0xC00 - 0xE20 */ - .endr - - .section .text64, "ax" - -/* - * --- Exception/Interrupt/Event Handling Section - */ - -/* - * VBR and RESVEC blocks. - * - * First level handler for VBR-based exceptions. - * - * To avoid waste of space, align to the maximum text block size. - * This is assumed to be at most 128 bytes or 32 instructions. - * DO NOT EXCEED 32 instructions on the first level handlers ! - * - * Also note that RESVEC is contained within the VBR block - * where the room left (1KB - TEXT_SIZE) allows placing - * the RESVEC block (at most 512B + TEXT_SIZE). - * - * So first (and only) level handler for RESVEC-based exceptions. - * - * Where the fault/interrupt is handled (not_a_tlb_miss, tlb_miss - * and interrupt) we are a lot tight with register space until - * saving onto the stack frame, which is done in handle_exception(). - * - */ - -#define TEXT_SIZE 128 -#define BLOCK_SIZE 1664 /* Dynamic check, 13*128 */ - - .balign TEXT_SIZE -LVBR_block: - .space 256, 0 /* Power-on class handler, */ - /* not required here */ -not_a_tlb_miss: - synco /* TAKum03020 (but probably a good idea anyway.) */ - /* Save original stack pointer into KCR1 */ - putcon SP, KCR1 - - /* Save other original registers into reg_save_area */ - movi reg_save_area, SP - st.q SP, SAVED_R2, r2 - st.q SP, SAVED_R3, r3 - st.q SP, SAVED_R4, r4 - st.q SP, SAVED_R5, r5 - st.q SP, SAVED_R6, r6 - st.q SP, SAVED_R18, r18 - gettr tr0, r3 - st.q SP, SAVED_TR0, r3 - - /* Set args for Non-debug, Not a TLB miss class handler */ - getcon EXPEVT, r2 - movi ret_from_exception, r3 - ori r3, 1, r3 - movi EVENT_FAULT_NOT_TLB, r4 - or SP, ZERO, r5 - getcon KCR1, SP - pta handle_exception, tr0 - blink tr0, ZERO - - .balign 256 - ! VBR+0x200 - nop - .balign 256 - ! VBR+0x300 - nop - .balign 256 - /* - * Instead of the natural .balign 1024 place RESVEC here - * respecting the final 1KB alignment. - */ - .balign TEXT_SIZE - /* - * Instead of '.space 1024-TEXT_SIZE' place the RESVEC - * block making sure the final alignment is correct. - */ -#ifdef CONFIG_MMU -tlb_miss: - synco /* TAKum03020 (but probably a good idea anyway.) */ - putcon SP, KCR1 - movi reg_save_area, SP - /* SP is guaranteed 32-byte aligned. */ - st.q SP, TLB_SAVED_R0 , r0 - st.q SP, TLB_SAVED_R1 , r1 - st.q SP, SAVED_R2 , r2 - st.q SP, SAVED_R3 , r3 - st.q SP, SAVED_R4 , r4 - st.q SP, SAVED_R5 , r5 - st.q SP, SAVED_R6 , r6 - st.q SP, SAVED_R18, r18 - - /* Save R25 for safety; as/ld may want to use it to achieve the call to - * the code in mm/tlbmiss.c */ - st.q SP, TLB_SAVED_R25, r25 - gettr tr0, r2 - gettr tr1, r3 - gettr tr2, r4 - gettr tr3, r5 - gettr tr4, r18 - st.q SP, SAVED_TR0 , r2 - st.q SP, TLB_SAVED_TR1 , r3 - st.q SP, TLB_SAVED_TR2 , r4 - st.q SP, TLB_SAVED_TR3 , r5 - st.q SP, TLB_SAVED_TR4 , r18 - - pt do_fast_page_fault, tr0 - getcon SSR, r2 - getcon EXPEVT, r3 - getcon TEA, r4 - shlri r2, 30, r2 - andi r2, 1, r2 /* r2 = SSR.MD */ - blink tr0, LINK - - pt fixup_to_invoke_general_handler, tr1 - - /* If the fast path handler fixed the fault, just drop through quickly - to the restore code right away to return to the excepting context. - */ - bnei/u r2, 0, tr1 - -fast_tlb_miss_restore: - ld.q SP, SAVED_TR0, r2 - ld.q SP, TLB_SAVED_TR1, r3 - ld.q SP, TLB_SAVED_TR2, r4 - - ld.q SP, TLB_SAVED_TR3, r5 - ld.q SP, TLB_SAVED_TR4, r18 - - ptabs r2, tr0 - ptabs r3, tr1 - ptabs r4, tr2 - ptabs r5, tr3 - ptabs r18, tr4 - - ld.q SP, TLB_SAVED_R0, r0 - ld.q SP, TLB_SAVED_R1, r1 - ld.q SP, SAVED_R2, r2 - ld.q SP, SAVED_R3, r3 - ld.q SP, SAVED_R4, r4 - ld.q SP, SAVED_R5, r5 - ld.q SP, SAVED_R6, r6 - ld.q SP, SAVED_R18, r18 - ld.q SP, TLB_SAVED_R25, r25 - - getcon KCR1, SP - rte - nop /* for safety, in case the code is run on sh5-101 cut1.x */ - -fixup_to_invoke_general_handler: - - /* OK, new method. Restore stuff that's not expected to get saved into - the 'first-level' reg save area, then just fall through to setting - up the registers and calling the second-level handler. */ - - /* 2nd level expects r2,3,4,5,6,18,tr0 to be saved. So we must restore - r25,tr1-4 and save r6 to get into the right state. */ - - ld.q SP, TLB_SAVED_TR1, r3 - ld.q SP, TLB_SAVED_TR2, r4 - ld.q SP, TLB_SAVED_TR3, r5 - ld.q SP, TLB_SAVED_TR4, r18 - ld.q SP, TLB_SAVED_R25, r25 - - ld.q SP, TLB_SAVED_R0, r0 - ld.q SP, TLB_SAVED_R1, r1 - - ptabs/u r3, tr1 - ptabs/u r4, tr2 - ptabs/u r5, tr3 - ptabs/u r18, tr4 - - /* Set args for Non-debug, TLB miss class handler */ - getcon EXPEVT, r2 - movi ret_from_exception, r3 - ori r3, 1, r3 - movi EVENT_FAULT_TLB, r4 - or SP, ZERO, r5 - getcon KCR1, SP - pta handle_exception, tr0 - blink tr0, ZERO -#else /* CONFIG_MMU */ - .balign 256 -#endif - -/* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE - DOES END UP AT VBR+0x600 */ - nop - nop - nop - nop - nop - nop - - .balign 256 - /* VBR + 0x600 */ - -interrupt: - synco /* TAKum03020 (but probably a good idea anyway.) */ - /* Save original stack pointer into KCR1 */ - putcon SP, KCR1 - - /* Save other original registers into reg_save_area */ - movi reg_save_area, SP - st.q SP, SAVED_R2, r2 - st.q SP, SAVED_R3, r3 - st.q SP, SAVED_R4, r4 - st.q SP, SAVED_R5, r5 - st.q SP, SAVED_R6, r6 - st.q SP, SAVED_R18, r18 - gettr tr0, r3 - st.q SP, SAVED_TR0, r3 - - /* Set args for interrupt class handler */ - getcon INTEVT, r2 - movi ret_from_irq, r3 - ori r3, 1, r3 - movi EVENT_INTERRUPT, r4 - or SP, ZERO, r5 - getcon KCR1, SP - pta handle_exception, tr0 - blink tr0, ZERO - .balign TEXT_SIZE /* let's waste the bare minimum */ - -LVBR_block_end: /* Marker. Used for total checking */ - - .balign 256 -LRESVEC_block: - /* Panic handler. Called with MMU off. Possible causes/actions: - * - Reset: Jump to program start. - * - Single Step: Turn off Single Step & return. - * - Others: Call panic handler, passing PC as arg. - * (this may need to be extended...) - */ -reset_or_panic: - synco /* TAKum03020 (but probably a good idea anyway.) */ - putcon SP, DCR - /* First save r0-1 and tr0, as we need to use these */ - movi resvec_save_area-CONFIG_PAGE_OFFSET, SP - st.q SP, 0, r0 - st.q SP, 8, r1 - gettr tr0, r0 - st.q SP, 32, r0 - - /* Check cause */ - getcon EXPEVT, r0 - movi RESET_CAUSE, r1 - sub r1, r0, r1 /* r1=0 if reset */ - movi _stext-CONFIG_PAGE_OFFSET, r0 - ori r0, 1, r0 - ptabs r0, tr0 - beqi r1, 0, tr0 /* Jump to start address if reset */ - - getcon EXPEVT, r0 - movi DEBUGSS_CAUSE, r1 - sub r1, r0, r1 /* r1=0 if single step */ - pta single_step_panic, tr0 - beqi r1, 0, tr0 /* jump if single step */ - - /* Now jump to where we save the registers. */ - movi panic_stash_regs-CONFIG_PAGE_OFFSET, r1 - ptabs r1, tr0 - blink tr0, r63 - -single_step_panic: - /* We are in a handler with Single Step set. We need to resume the - * handler, by turning on MMU & turning off Single Step. */ - getcon SSR, r0 - movi SR_MMU, r1 - or r0, r1, r0 - movi ~SR_SS, r1 - and r0, r1, r0 - putcon r0, SSR - /* Restore EXPEVT, as the rte won't do this */ - getcon PEXPEVT, r0 - putcon r0, EXPEVT - /* Restore regs */ - ld.q SP, 32, r0 - ptabs r0, tr0 - ld.q SP, 0, r0 - ld.q SP, 8, r1 - getcon DCR, SP - synco - rte - - - .balign 256 -debug_exception: - synco /* TAKum03020 (but probably a good idea anyway.) */ - /* - * Single step/software_break_point first level handler. - * Called with MMU off, so the first thing we do is enable it - * by doing an rte with appropriate SSR. - */ - putcon SP, DCR - /* Save SSR & SPC, together with R0 & R1, as we need to use 2 regs. */ - movi resvec_save_area-CONFIG_PAGE_OFFSET, SP - - /* With the MMU off, we are bypassing the cache, so purge any - * data that will be made stale by the following stores. - */ - ocbp SP, 0 - synco - - st.q SP, 0, r0 - st.q SP, 8, r1 - getcon SPC, r0 - st.q SP, 16, r0 - getcon SSR, r0 - st.q SP, 24, r0 - - /* Enable MMU, block exceptions, set priv mode, disable single step */ - movi SR_MMU | SR_BL | SR_MD, r1 - or r0, r1, r0 - movi ~SR_SS, r1 - and r0, r1, r0 - putcon r0, SSR - /* Force control to debug_exception_2 when rte is executed */ - movi debug_exeception_2, r0 - ori r0, 1, r0 /* force SHmedia, just in case */ - putcon r0, SPC - getcon DCR, SP - synco - rte -debug_exeception_2: - /* Restore saved regs */ - putcon SP, KCR1 - movi resvec_save_area, SP - ld.q SP, 24, r0 - putcon r0, SSR - ld.q SP, 16, r0 - putcon r0, SPC - ld.q SP, 0, r0 - ld.q SP, 8, r1 - - /* Save other original registers into reg_save_area */ - movi reg_save_area, SP - st.q SP, SAVED_R2, r2 - st.q SP, SAVED_R3, r3 - st.q SP, SAVED_R4, r4 - st.q SP, SAVED_R5, r5 - st.q SP, SAVED_R6, r6 - st.q SP, SAVED_R18, r18 - gettr tr0, r3 - st.q SP, SAVED_TR0, r3 - - /* Set args for debug class handler */ - getcon EXPEVT, r2 - movi ret_from_exception, r3 - ori r3, 1, r3 - movi EVENT_DEBUG, r4 - or SP, ZERO, r5 - getcon KCR1, SP - pta handle_exception, tr0 - blink tr0, ZERO - - .balign 256 -debug_interrupt: - /* !!! WE COME HERE IN REAL MODE !!! */ - /* Hook-up debug interrupt to allow various debugging options to be - * hooked into its handler. */ - /* Save original stack pointer into KCR1 */ - synco - putcon SP, KCR1 - movi resvec_save_area-CONFIG_PAGE_OFFSET, SP - ocbp SP, 0 - ocbp SP, 32 - synco - - /* Save other original registers into reg_save_area thru real addresses */ - st.q SP, SAVED_R2, r2 - st.q SP, SAVED_R3, r3 - st.q SP, SAVED_R4, r4 - st.q SP, SAVED_R5, r5 - st.q SP, SAVED_R6, r6 - st.q SP, SAVED_R18, r18 - gettr tr0, r3 - st.q SP, SAVED_TR0, r3 - - /* move (spc,ssr)->(pspc,pssr). The rte will shift - them back again, so that they look like the originals - as far as the real handler code is concerned. */ - getcon spc, r6 - putcon r6, pspc - getcon ssr, r6 - putcon r6, pssr - - ! construct useful SR for handle_exception - movi 3, r6 - shlli r6, 30, r6 - getcon sr, r18 - or r18, r6, r6 - putcon r6, ssr - - ! SSR is now the current SR with the MD and MMU bits set - ! i.e. the rte will switch back to priv mode and put - ! the mmu back on - - ! construct spc - movi handle_exception, r18 - ori r18, 1, r18 ! for safety (do we need this?) - putcon r18, spc - - /* Set args for Non-debug, Not a TLB miss class handler */ - - ! EXPEVT==0x80 is unused, so 'steal' this value to put the - ! debug interrupt handler in the vectoring table - movi 0x80, r2 - movi ret_from_exception, r3 - ori r3, 1, r3 - movi EVENT_FAULT_NOT_TLB, r4 - - or SP, ZERO, r5 - movi CONFIG_PAGE_OFFSET, r6 - add r6, r5, r5 - getcon KCR1, SP - - synco ! for safety - rte ! -> handle_exception, switch back to priv mode again - -LRESVEC_block_end: /* Marker. Unused. */ - - .balign TEXT_SIZE - -/* - * Second level handler for VBR-based exceptions. Pre-handler. - * In common to all stack-frame sensitive handlers. - * - * Inputs: - * (KCR0) Current [current task union] - * (KCR1) Original SP - * (r2) INTEVT/EXPEVT - * (r3) appropriate return address - * (r4) Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault, 3=debug) - * (r5) Pointer to reg_save_area - * (SP) Original SP - * - * Available registers: - * (r6) - * (r18) - * (tr0) - * - */ -handle_exception: - /* Common 2nd level handler. */ - - /* First thing we need an appropriate stack pointer */ - getcon SSR, r6 - shlri r6, 30, r6 - andi r6, 1, r6 - pta stack_ok, tr0 - bne r6, ZERO, tr0 /* Original stack pointer is fine */ - - /* Set stack pointer for user fault */ - getcon KCR0, SP - movi THREAD_SIZE, r6 /* Point to the end */ - add SP, r6, SP - -stack_ok: - -/* DEBUG : check for underflow/overflow of the kernel stack */ - pta no_underflow, tr0 - getcon KCR0, r6 - movi 1024, r18 - add r6, r18, r6 - bge SP, r6, tr0 ! ? below 1k from bottom of stack : danger zone - -/* Just panic to cause a crash. */ -bad_sp: - ld.b r63, 0, r6 - nop - -no_underflow: - pta bad_sp, tr0 - getcon kcr0, r6 - movi THREAD_SIZE, r18 - add r18, r6, r6 - bgt SP, r6, tr0 ! sp above the stack - - /* Make some room for the BASIC frame. */ - movi -(FRAME_SIZE), r6 - add SP, r6, SP - -/* Could do this with no stalling if we had another spare register, but the - code below will be OK. */ - ld.q r5, SAVED_R2, r6 - ld.q r5, SAVED_R3, r18 - st.q SP, FRAME_R(2), r6 - ld.q r5, SAVED_R4, r6 - st.q SP, FRAME_R(3), r18 - ld.q r5, SAVED_R5, r18 - st.q SP, FRAME_R(4), r6 - ld.q r5, SAVED_R6, r6 - st.q SP, FRAME_R(5), r18 - ld.q r5, SAVED_R18, r18 - st.q SP, FRAME_R(6), r6 - ld.q r5, SAVED_TR0, r6 - st.q SP, FRAME_R(18), r18 - st.q SP, FRAME_T(0), r6 - - /* Keep old SP around */ - getcon KCR1, r6 - - /* Save the rest of the general purpose registers */ - st.q SP, FRAME_R(0), r0 - st.q SP, FRAME_R(1), r1 - st.q SP, FRAME_R(7), r7 - st.q SP, FRAME_R(8), r8 - st.q SP, FRAME_R(9), r9 - st.q SP, FRAME_R(10), r10 - st.q SP, FRAME_R(11), r11 - st.q SP, FRAME_R(12), r12 - st.q SP, FRAME_R(13), r13 - st.q SP, FRAME_R(14), r14 - - /* SP is somewhere else */ - st.q SP, FRAME_R(15), r6 - - st.q SP, FRAME_R(16), r16 - st.q SP, FRAME_R(17), r17 - /* r18 is saved earlier. */ - st.q SP, FRAME_R(19), r19 - st.q SP, FRAME_R(20), r20 - st.q SP, FRAME_R(21), r21 - st.q SP, FRAME_R(22), r22 - st.q SP, FRAME_R(23), r23 - st.q SP, FRAME_R(24), r24 - st.q SP, FRAME_R(25), r25 - st.q SP, FRAME_R(26), r26 - st.q SP, FRAME_R(27), r27 - st.q SP, FRAME_R(28), r28 - st.q SP, FRAME_R(29), r29 - st.q SP, FRAME_R(30), r30 - st.q SP, FRAME_R(31), r31 - st.q SP, FRAME_R(32), r32 - st.q SP, FRAME_R(33), r33 - st.q SP, FRAME_R(34), r34 - st.q SP, FRAME_R(35), r35 - st.q SP, FRAME_R(36), r36 - st.q SP, FRAME_R(37), r37 - st.q SP, FRAME_R(38), r38 - st.q SP, FRAME_R(39), r39 - st.q SP, FRAME_R(40), r40 - st.q SP, FRAME_R(41), r41 - st.q SP, FRAME_R(42), r42 - st.q SP, FRAME_R(43), r43 - st.q SP, FRAME_R(44), r44 - st.q SP, FRAME_R(45), r45 - st.q SP, FRAME_R(46), r46 - st.q SP, FRAME_R(47), r47 - st.q SP, FRAME_R(48), r48 - st.q SP, FRAME_R(49), r49 - st.q SP, FRAME_R(50), r50 - st.q SP, FRAME_R(51), r51 - st.q SP, FRAME_R(52), r52 - st.q SP, FRAME_R(53), r53 - st.q SP, FRAME_R(54), r54 - st.q SP, FRAME_R(55), r55 - st.q SP, FRAME_R(56), r56 - st.q SP, FRAME_R(57), r57 - st.q SP, FRAME_R(58), r58 - st.q SP, FRAME_R(59), r59 - st.q SP, FRAME_R(60), r60 - st.q SP, FRAME_R(61), r61 - st.q SP, FRAME_R(62), r62 - - /* - * Save the S* registers. - */ - getcon SSR, r61 - st.q SP, FRAME_S(FSSR), r61 - getcon SPC, r62 - st.q SP, FRAME_S(FSPC), r62 - movi -1, r62 /* Reset syscall_nr */ - st.q SP, FRAME_S(FSYSCALL_ID), r62 - - /* Save the rest of the target registers */ - gettr tr1, r6 - st.q SP, FRAME_T(1), r6 - gettr tr2, r6 - st.q SP, FRAME_T(2), r6 - gettr tr3, r6 - st.q SP, FRAME_T(3), r6 - gettr tr4, r6 - st.q SP, FRAME_T(4), r6 - gettr tr5, r6 - st.q SP, FRAME_T(5), r6 - gettr tr6, r6 - st.q SP, FRAME_T(6), r6 - gettr tr7, r6 - st.q SP, FRAME_T(7), r6 - - ! setup FP so that unwinder can wind back through nested kernel mode - ! exceptions - add SP, ZERO, r14 - - /* For syscall and debug race condition, get TRA now */ - getcon TRA, r5 - - /* We are in a safe position to turn SR.BL off, but set IMASK=0xf - * Also set FD, to catch FPU usage in the kernel. - * - * benedict.gaster@superh.com 29/07/2002 - * - * On all SH5-101 revisions it is unsafe to raise the IMASK and at the - * same time change BL from 1->0, as any pending interrupt of a level - * higher than he previous value of IMASK will leak through and be - * taken unexpectedly. - * - * To avoid this we raise the IMASK and then issue another PUTCON to - * enable interrupts. - */ - getcon SR, r6 - movi SR_IMASK | SR_FD, r7 - or r6, r7, r6 - putcon r6, SR - movi SR_UNBLOCK_EXC, r7 - and r6, r7, r6 - putcon r6, SR - - - /* Now call the appropriate 3rd level handler */ - or r3, ZERO, LINK - movi trap_jtable, r3 - shlri r2, 3, r2 - ldx.l r2, r3, r3 - shlri r2, 2, r2 - ptabs r3, tr0 - or SP, ZERO, r3 - blink tr0, ZERO - -/* - * Second level handler for VBR-based exceptions. Post-handlers. - * - * Post-handlers for interrupts (ret_from_irq), exceptions - * (ret_from_exception) and common reentrance doors (restore_all - * to get back to the original context, ret_from_syscall loop to - * check kernel exiting). - * - * ret_with_reschedule and work_notifysig are an inner lables of - * the ret_from_syscall loop. - * - * In common to all stack-frame sensitive handlers. - * - * Inputs: - * (SP) struct pt_regs *, original register's frame pointer (basic) - * - */ - .global ret_from_irq -ret_from_irq: - ld.q SP, FRAME_S(FSSR), r6 - shlri r6, 30, r6 - andi r6, 1, r6 - pta resume_kernel, tr0 - bne r6, ZERO, tr0 /* no further checks */ - STI() - pta ret_with_reschedule, tr0 - blink tr0, ZERO /* Do not check softirqs */ - - .global ret_from_exception -ret_from_exception: - preempt_stop() - - ld.q SP, FRAME_S(FSSR), r6 - shlri r6, 30, r6 - andi r6, 1, r6 - pta resume_kernel, tr0 - bne r6, ZERO, tr0 /* no further checks */ - - /* Check softirqs */ - -#ifdef CONFIG_PREEMPTION - pta ret_from_syscall, tr0 - blink tr0, ZERO - -resume_kernel: - CLI() - - pta restore_all, tr0 - - getcon KCR0, r6 - ld.l r6, TI_PRE_COUNT, r7 - beq/u r7, ZERO, tr0 - -need_resched: - ld.l r6, TI_FLAGS, r7 - movi (1 << TIF_NEED_RESCHED), r8 - and r8, r7, r8 - bne r8, ZERO, tr0 - - getcon SR, r7 - andi r7, 0xf0, r7 - bne r7, ZERO, tr0 - - movi preempt_schedule_irq, r7 - ori r7, 1, r7 - ptabs r7, tr1 - blink tr1, LINK - - pta need_resched, tr1 - blink tr1, ZERO -#endif - - .global ret_from_syscall -ret_from_syscall: - -ret_with_reschedule: - getcon KCR0, r6 ! r6 contains current_thread_info - ld.l r6, TI_FLAGS, r7 ! r7 contains current_thread_info->flags - - movi _TIF_NEED_RESCHED, r8 - and r8, r7, r8 - pta work_resched, tr0 - bne r8, ZERO, tr0 - - pta restore_all, tr1 - - movi (_TIF_SIGPENDING|_TIF_NOTIFY_RESUME), r8 - and r8, r7, r8 - pta work_notifysig, tr0 - bne r8, ZERO, tr0 - - blink tr1, ZERO - -work_resched: - pta ret_from_syscall, tr0 - gettr tr0, LINK - movi schedule, r6 - ptabs r6, tr0 - blink tr0, ZERO /* Call schedule(), return on top */ - -work_notifysig: - gettr tr1, LINK - - movi do_notify_resume, r6 - ptabs r6, tr0 - or SP, ZERO, r2 - or r7, ZERO, r3 - blink tr0, LINK /* Call do_notify_resume(regs, current_thread_info->flags), return here */ - -restore_all: - /* Do prefetches */ - - ld.q SP, FRAME_T(0), r6 - ld.q SP, FRAME_T(1), r7 - ld.q SP, FRAME_T(2), r8 - ld.q SP, FRAME_T(3), r9 - ptabs r6, tr0 - ptabs r7, tr1 - ptabs r8, tr2 - ptabs r9, tr3 - ld.q SP, FRAME_T(4), r6 - ld.q SP, FRAME_T(5), r7 - ld.q SP, FRAME_T(6), r8 - ld.q SP, FRAME_T(7), r9 - ptabs r6, tr4 - ptabs r7, tr5 - ptabs r8, tr6 - ptabs r9, tr7 - - ld.q SP, FRAME_R(0), r0 - ld.q SP, FRAME_R(1), r1 - ld.q SP, FRAME_R(2), r2 - ld.q SP, FRAME_R(3), r3 - ld.q SP, FRAME_R(4), r4 - ld.q SP, FRAME_R(5), r5 - ld.q SP, FRAME_R(6), r6 - ld.q SP, FRAME_R(7), r7 - ld.q SP, FRAME_R(8), r8 - ld.q SP, FRAME_R(9), r9 - ld.q SP, FRAME_R(10), r10 - ld.q SP, FRAME_R(11), r11 - ld.q SP, FRAME_R(12), r12 - ld.q SP, FRAME_R(13), r13 - ld.q SP, FRAME_R(14), r14 - - ld.q SP, FRAME_R(16), r16 - ld.q SP, FRAME_R(17), r17 - ld.q SP, FRAME_R(18), r18 - ld.q SP, FRAME_R(19), r19 - ld.q SP, FRAME_R(20), r20 - ld.q SP, FRAME_R(21), r21 - ld.q SP, FRAME_R(22), r22 - ld.q SP, FRAME_R(23), r23 - ld.q SP, FRAME_R(24), r24 - ld.q SP, FRAME_R(25), r25 - ld.q SP, FRAME_R(26), r26 - ld.q SP, FRAME_R(27), r27 - ld.q SP, FRAME_R(28), r28 - ld.q SP, FRAME_R(29), r29 - ld.q SP, FRAME_R(30), r30 - ld.q SP, FRAME_R(31), r31 - ld.q SP, FRAME_R(32), r32 - ld.q SP, FRAME_R(33), r33 - ld.q SP, FRAME_R(34), r34 - ld.q SP, FRAME_R(35), r35 - ld.q SP, FRAME_R(36), r36 - ld.q SP, FRAME_R(37), r37 - ld.q SP, FRAME_R(38), r38 - ld.q SP, FRAME_R(39), r39 - ld.q SP, FRAME_R(40), r40 - ld.q SP, FRAME_R(41), r41 - ld.q SP, FRAME_R(42), r42 - ld.q SP, FRAME_R(43), r43 - ld.q SP, FRAME_R(44), r44 - ld.q SP, FRAME_R(45), r45 - ld.q SP, FRAME_R(46), r46 - ld.q SP, FRAME_R(47), r47 - ld.q SP, FRAME_R(48), r48 - ld.q SP, FRAME_R(49), r49 - ld.q SP, FRAME_R(50), r50 - ld.q SP, FRAME_R(51), r51 - ld.q SP, FRAME_R(52), r52 - ld.q SP, FRAME_R(53), r53 - ld.q SP, FRAME_R(54), r54 - ld.q SP, FRAME_R(55), r55 - ld.q SP, FRAME_R(56), r56 - ld.q SP, FRAME_R(57), r57 - ld.q SP, FRAME_R(58), r58 - - getcon SR, r59 - movi SR_BLOCK_EXC, r60 - or r59, r60, r59 - putcon r59, SR /* SR.BL = 1, keep nesting out */ - ld.q SP, FRAME_S(FSSR), r61 - ld.q SP, FRAME_S(FSPC), r62 - movi SR_ASID_MASK, r60 - and r59, r60, r59 - andc r61, r60, r61 /* Clear out older ASID */ - or r59, r61, r61 /* Retain current ASID */ - putcon r61, SSR - putcon r62, SPC - - /* Ignore FSYSCALL_ID */ - - ld.q SP, FRAME_R(59), r59 - ld.q SP, FRAME_R(60), r60 - ld.q SP, FRAME_R(61), r61 - ld.q SP, FRAME_R(62), r62 - - /* Last touch */ - ld.q SP, FRAME_R(15), SP - rte - nop - -/* - * Third level handlers for VBR-based exceptions. Adapting args to - * and/or deflecting to fourth level handlers. - * - * Fourth level handlers interface. - * Most are C-coded handlers directly pointed by the trap_jtable. - * (Third = Fourth level) - * Inputs: - * (r2) fault/interrupt code, entry number (e.g. NMI = 14, - * IRL0-3 (0000) = 16, RTLBMISS = 2, SYSCALL = 11, etc ...) - * (r3) struct pt_regs *, original register's frame pointer - * (r4) Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault) - * (r5) TRA control register (for syscall/debug benefit only) - * (LINK) return address - * (SP) = r3 - * - * Kernel TLB fault handlers will get a slightly different interface. - * (r2) struct pt_regs *, original register's frame pointer - * (r3) page fault error code (see asm/thread_info.h) - * (r4) Effective Address of fault - * (LINK) return address - * (SP) = r2 - * - * fpu_error_or_IRQ? is a helper to deflect to the right cause. - * - */ -#ifdef CONFIG_MMU -tlb_miss_load: - or SP, ZERO, r2 - or ZERO, ZERO, r3 /* Read */ - getcon TEA, r4 - pta call_do_page_fault, tr0 - beq ZERO, ZERO, tr0 - -tlb_miss_store: - or SP, ZERO, r2 - movi FAULT_CODE_WRITE, r3 /* Write */ - getcon TEA, r4 - pta call_do_page_fault, tr0 - beq ZERO, ZERO, tr0 - -itlb_miss_or_IRQ: - pta its_IRQ, tr0 - beqi/u r4, EVENT_INTERRUPT, tr0 - - /* ITLB miss */ - or SP, ZERO, r2 - movi FAULT_CODE_ITLB, r3 - getcon TEA, r4 - /* Fall through */ - -call_do_page_fault: - movi do_page_fault, r6 - ptabs r6, tr0 - blink tr0, ZERO -#endif /* CONFIG_MMU */ - -fpu_error_or_IRQA: - pta its_IRQ, tr0 - beqi/l r4, EVENT_INTERRUPT, tr0 -#ifdef CONFIG_SH_FPU - movi fpu_state_restore_trap_handler, r6 -#else - movi do_exception_error, r6 -#endif - ptabs r6, tr0 - blink tr0, ZERO - -fpu_error_or_IRQB: - pta its_IRQ, tr0 - beqi/l r4, EVENT_INTERRUPT, tr0 -#ifdef CONFIG_SH_FPU - movi fpu_state_restore_trap_handler, r6 -#else - movi do_exception_error, r6 -#endif - ptabs r6, tr0 - blink tr0, ZERO - -its_IRQ: - movi do_IRQ, r6 - ptabs r6, tr0 - blink tr0, ZERO - -/* - * system_call/unknown_trap third level handler: - * - * Inputs: - * (r2) fault/interrupt code, entry number (TRAP = 11) - * (r3) struct pt_regs *, original register's frame pointer - * (r4) Not used. Event (0=interrupt, 1=TLB miss fault, 2=Not TLB miss fault) - * (r5) TRA Control Reg (0x00xyzzzz: x=1 SYSCALL, y = #args, z=nr) - * (SP) = r3 - * (LINK) return address: ret_from_exception - * (*r3) Syscall parms: SC#, arg0, arg1, ..., arg5 in order (Saved r2/r7) - * - * Outputs: - * (*r3) Syscall reply (Saved r2) - * (LINK) In case of syscall only it can be scrapped. - * Common second level post handler will be ret_from_syscall. - * Common (non-trace) exit point to that is syscall_ret (saving - * result to r2). Common bad exit point is syscall_bad (returning - * ENOSYS then saved to r2). - * - */ - -unknown_trap: - /* Unknown Trap or User Trace */ - movi do_unknown_trapa, r6 - ptabs r6, tr0 - ld.q r3, FRAME_R(9), r2 /* r2 = #arg << 16 | syscall # */ - andi r2, 0x1ff, r2 /* r2 = syscall # */ - blink tr0, LINK - - pta syscall_ret, tr0 - blink tr0, ZERO - - /* New syscall implementation*/ -system_call: - pta unknown_trap, tr0 - or r5, ZERO, r4 /* TRA (=r5) -> r4 */ - shlri r4, 20, r4 - bnei r4, 1, tr0 /* unknown_trap if not 0x1yzzzz */ - - /* It's a system call */ - st.q r3, FRAME_S(FSYSCALL_ID), r5 /* ID (0x1yzzzz) -> stack */ - andi r5, 0x1ff, r5 /* syscall # -> r5 */ - - STI() - - pta syscall_allowed, tr0 - movi NR_syscalls - 1, r4 /* Last valid */ - bgeu/l r4, r5, tr0 - -syscall_bad: - /* Return ENOSYS ! */ - movi -(ENOSYS), r2 /* Fall-through */ - - .global syscall_ret -syscall_ret: - st.q SP, FRAME_R(9), r2 /* Expecting SP back to BASIC frame */ - ld.q SP, FRAME_S(FSPC), r2 - addi r2, 4, r2 /* Move PC, being pre-execution event */ - st.q SP, FRAME_S(FSPC), r2 - pta ret_from_syscall, tr0 - blink tr0, ZERO - - -/* A different return path for ret_from_fork, because we now need - * to call schedule_tail with the later kernels. Because prev is - * loaded into r2 by switch_to() means we can just call it straight away - */ - -.global ret_from_fork -ret_from_fork: - - movi schedule_tail,r5 - ori r5, 1, r5 - ptabs r5, tr0 - blink tr0, LINK - - ld.q SP, FRAME_S(FSPC), r2 - addi r2, 4, r2 /* Move PC, being pre-execution event */ - st.q SP, FRAME_S(FSPC), r2 - pta ret_from_syscall, tr0 - blink tr0, ZERO - -.global ret_from_kernel_thread -ret_from_kernel_thread: - - movi schedule_tail,r5 - ori r5, 1, r5 - ptabs r5, tr0 - blink tr0, LINK - - ld.q SP, FRAME_R(2), r2 - ld.q SP, FRAME_R(3), r3 - ptabs r3, tr0 - blink tr0, LINK - - ld.q SP, FRAME_S(FSPC), r2 - addi r2, 4, r2 /* Move PC, being pre-execution event */ - st.q SP, FRAME_S(FSPC), r2 - pta ret_from_syscall, tr0 - blink tr0, ZERO - -syscall_allowed: - /* Use LINK to deflect the exit point, default is syscall_ret */ - pta syscall_ret, tr0 - gettr tr0, LINK - pta syscall_notrace, tr0 - - getcon KCR0, r2 - ld.l r2, TI_FLAGS, r4 - movi _TIF_WORK_SYSCALL_MASK, r6 - and r6, r4, r6 - beq/l r6, ZERO, tr0 - - /* Trace it by calling syscall_trace before and after */ - movi do_syscall_trace_enter, r4 - or SP, ZERO, r2 - ptabs r4, tr0 - blink tr0, LINK - - /* Save the retval */ - st.q SP, FRAME_R(2), r2 - - /* Reload syscall number as r5 is trashed by do_syscall_trace_enter */ - ld.q SP, FRAME_S(FSYSCALL_ID), r5 - andi r5, 0x1ff, r5 - - pta syscall_ret_trace, tr0 - gettr tr0, LINK - -syscall_notrace: - /* Now point to the appropriate 4th level syscall handler */ - movi sys_call_table, r4 - shlli r5, 2, r5 - ldx.l r4, r5, r5 - ptabs r5, tr0 - - /* Prepare original args */ - ld.q SP, FRAME_R(2), r2 - ld.q SP, FRAME_R(3), r3 - ld.q SP, FRAME_R(4), r4 - ld.q SP, FRAME_R(5), r5 - ld.q SP, FRAME_R(6), r6 - ld.q SP, FRAME_R(7), r7 - - /* And now the trick for those syscalls requiring regs * ! */ - or SP, ZERO, r8 - - /* Call it */ - blink tr0, ZERO /* LINK is already properly set */ - -syscall_ret_trace: - /* We get back here only if under trace */ - st.q SP, FRAME_R(9), r2 /* Save return value */ - - movi do_syscall_trace_leave, LINK - or SP, ZERO, r2 - ptabs LINK, tr0 - blink tr0, LINK - - /* This needs to be done after any syscall tracing */ - ld.q SP, FRAME_S(FSPC), r2 - addi r2, 4, r2 /* Move PC, being pre-execution event */ - st.q SP, FRAME_S(FSPC), r2 - - pta ret_from_syscall, tr0 - blink tr0, ZERO /* Resume normal return sequence */ - -/* - * --- Switch to running under a particular ASID and return the previous ASID value - * --- The caller is assumed to have done a cli before calling this. - * - * Input r2 : new ASID - * Output r2 : old ASID - */ - - .global switch_and_save_asid -switch_and_save_asid: - getcon sr, r0 - movi 255, r4 - shlli r4, 16, r4 /* r4 = mask to select ASID */ - and r0, r4, r3 /* r3 = shifted old ASID */ - andi r2, 255, r2 /* mask down new ASID */ - shlli r2, 16, r2 /* align new ASID against SR.ASID */ - andc r0, r4, r0 /* efface old ASID from SR */ - or r0, r2, r0 /* insert the new ASID */ - putcon r0, ssr - movi 1f, r0 - putcon r0, spc - rte - nop -1: - ptabs LINK, tr0 - shlri r3, 16, r2 /* r2 = old ASID */ - blink tr0, r63 - - .global route_to_panic_handler -route_to_panic_handler: - /* Switch to real mode, goto panic_handler, don't return. Useful for - last-chance debugging, e.g. if no output wants to go to the console. - */ - - movi panic_handler - CONFIG_PAGE_OFFSET, r1 - ptabs r1, tr0 - pta 1f, tr1 - gettr tr1, r0 - putcon r0, spc - getcon sr, r0 - movi 1, r1 - shlli r1, 31, r1 - andc r0, r1, r0 - putcon r0, ssr - rte - nop -1: /* Now in real mode */ - blink tr0, r63 - nop - - .global peek_real_address_q -peek_real_address_q: - /* Two args: - r2 : real mode address to peek - r2(out) : result quadword - - This is provided as a cheapskate way of manipulating device - registers for debugging (to avoid the need to ioremap the debug - module, and to avoid the need to ioremap the watchpoint - controller in a way that identity maps sufficient bits to avoid the - SH5-101 cut2 silicon defect). - - This code is not performance critical - */ - - add.l r2, r63, r2 /* sign extend address */ - getcon sr, r0 /* r0 = saved original SR */ - movi 1, r1 - shlli r1, 28, r1 - or r0, r1, r1 /* r0 with block bit set */ - putcon r1, sr /* now in critical section */ - movi 1, r36 - shlli r36, 31, r36 - andc r1, r36, r1 /* turn sr.mmu off in real mode section */ - - putcon r1, ssr - movi .peek0 - CONFIG_PAGE_OFFSET, r36 /* real mode target address */ - movi 1f, r37 /* virtual mode return addr */ - putcon r36, spc - - synco - rte - nop - -.peek0: /* come here in real mode, don't touch caches!! - still in critical section (sr.bl==1) */ - putcon r0, ssr - putcon r37, spc - /* Here's the actual peek. If the address is bad, all bets are now off - * what will happen (handlers invoked in real-mode = bad news) */ - ld.q r2, 0, r2 - synco - rte /* Back to virtual mode */ - nop - -1: - ptabs LINK, tr0 - blink tr0, r63 - - .global poke_real_address_q -poke_real_address_q: - /* Two args: - r2 : real mode address to poke - r3 : quadword value to write. - - This is provided as a cheapskate way of manipulating device - registers for debugging (to avoid the need to ioremap the debug - module, and to avoid the need to ioremap the watchpoint - controller in a way that identity maps sufficient bits to avoid the - SH5-101 cut2 silicon defect). - - This code is not performance critical - */ - - add.l r2, r63, r2 /* sign extend address */ - getcon sr, r0 /* r0 = saved original SR */ - movi 1, r1 - shlli r1, 28, r1 - or r0, r1, r1 /* r0 with block bit set */ - putcon r1, sr /* now in critical section */ - movi 1, r36 - shlli r36, 31, r36 - andc r1, r36, r1 /* turn sr.mmu off in real mode section */ - - putcon r1, ssr - movi .poke0-CONFIG_PAGE_OFFSET, r36 /* real mode target address */ - movi 1f, r37 /* virtual mode return addr */ - putcon r36, spc - - synco - rte - nop - -.poke0: /* come here in real mode, don't touch caches!! - still in critical section (sr.bl==1) */ - putcon r0, ssr - putcon r37, spc - /* Here's the actual poke. If the address is bad, all bets are now off - * what will happen (handlers invoked in real-mode = bad news) */ - st.q r2, 0, r3 - synco - rte /* Back to virtual mode */ - nop - -1: - ptabs LINK, tr0 - blink tr0, r63 - -#ifdef CONFIG_MMU -/* - * --- User Access Handling Section - */ - -/* - * User Access support. It all moved to non inlined Assembler - * functions in here. - * - * __kernel_size_t __copy_user(void *__to, const void *__from, - * __kernel_size_t __n) - * - * Inputs: - * (r2) target address - * (r3) source address - * (r4) size in bytes - * - * Ouputs: - * (*r2) target data - * (r2) non-copied bytes - * - * If a fault occurs on the user pointer, bail out early and return the - * number of bytes not copied in r2. - * Strategy : for large blocks, call a real memcpy function which can - * move >1 byte at a time using unaligned ld/st instructions, and can - * manipulate the cache using prefetch + alloco to improve the speed - * further. If a fault occurs in that function, just revert to the - * byte-by-byte approach used for small blocks; this is rare so the - * performance hit for that case does not matter. - * - * For small blocks it's not worth the overhead of setting up and calling - * the memcpy routine; do the copy a byte at a time. - * - */ - .global __copy_user -__copy_user: - pta __copy_user_byte_by_byte, tr1 - movi 16, r0 ! this value is a best guess, should tune it by benchmarking - bge/u r0, r4, tr1 - pta copy_user_memcpy, tr0 - addi SP, -32, SP - /* Save arguments in case we have to fix-up unhandled page fault */ - st.q SP, 0, r2 - st.q SP, 8, r3 - st.q SP, 16, r4 - st.q SP, 24, r35 ! r35 is callee-save - /* Save LINK in a register to reduce RTS time later (otherwise - ld SP,*,LINK;ptabs LINK;trn;blink trn,r63 becomes a critical path) */ - ori LINK, 0, r35 - blink tr0, LINK - - /* Copy completed normally if we get back here */ - ptabs r35, tr0 - ld.q SP, 24, r35 - /* don't restore r2-r4, pointless */ - /* set result=r2 to zero as the copy must have succeeded. */ - or r63, r63, r2 - addi SP, 32, SP - blink tr0, r63 ! RTS - - .global __copy_user_fixup -__copy_user_fixup: - /* Restore stack frame */ - ori r35, 0, LINK - ld.q SP, 24, r35 - ld.q SP, 16, r4 - ld.q SP, 8, r3 - ld.q SP, 0, r2 - addi SP, 32, SP - /* Fall through to original code, in the 'same' state we entered with */ - -/* The slow byte-by-byte method is used if the fast copy traps due to a bad - user address. In that rare case, the speed drop can be tolerated. */ -__copy_user_byte_by_byte: - pta ___copy_user_exit, tr1 - pta ___copy_user1, tr0 - beq/u r4, r63, tr1 /* early exit for zero length copy */ - sub r2, r3, r0 - addi r0, -1, r0 - -___copy_user1: - ld.b r3, 0, r5 /* Fault address 1 */ - - /* Could rewrite this to use just 1 add, but the second comes 'free' - due to load latency */ - addi r3, 1, r3 - addi r4, -1, r4 /* No real fixup required */ -___copy_user2: - stx.b r3, r0, r5 /* Fault address 2 */ - bne r4, ZERO, tr0 - -___copy_user_exit: - or r4, ZERO, r2 - ptabs LINK, tr0 - blink tr0, ZERO - -/* - * __kernel_size_t __clear_user(void *addr, __kernel_size_t size) - * - * Inputs: - * (r2) target address - * (r3) size in bytes - * - * Ouputs: - * (*r2) zero-ed target data - * (r2) non-zero-ed bytes - */ - .global __clear_user -__clear_user: - pta ___clear_user_exit, tr1 - pta ___clear_user1, tr0 - beq/u r3, r63, tr1 - -___clear_user1: - st.b r2, 0, ZERO /* Fault address */ - addi r2, 1, r2 - addi r3, -1, r3 /* No real fixup required */ - bne r3, ZERO, tr0 - -___clear_user_exit: - or r3, ZERO, r2 - ptabs LINK, tr0 - blink tr0, ZERO - -#endif /* CONFIG_MMU */ - -/* - * extern long __get_user_asm_?(void *val, long addr) - * - * Inputs: - * (r2) dest address - * (r3) source address (in User Space) - * - * Ouputs: - * (r2) -EFAULT (faulting) - * 0 (not faulting) - */ - .global __get_user_asm_b -__get_user_asm_b: - or r2, ZERO, r4 - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___get_user_asm_b1: - ld.b r3, 0, r5 /* r5 = data */ - st.b r4, 0, r5 - or ZERO, ZERO, r2 - -___get_user_asm_b_exit: - ptabs LINK, tr0 - blink tr0, ZERO - - - .global __get_user_asm_w -__get_user_asm_w: - or r2, ZERO, r4 - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___get_user_asm_w1: - ld.w r3, 0, r5 /* r5 = data */ - st.w r4, 0, r5 - or ZERO, ZERO, r2 - -___get_user_asm_w_exit: - ptabs LINK, tr0 - blink tr0, ZERO - - - .global __get_user_asm_l -__get_user_asm_l: - or r2, ZERO, r4 - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___get_user_asm_l1: - ld.l r3, 0, r5 /* r5 = data */ - st.l r4, 0, r5 - or ZERO, ZERO, r2 - -___get_user_asm_l_exit: - ptabs LINK, tr0 - blink tr0, ZERO - - - .global __get_user_asm_q -__get_user_asm_q: - or r2, ZERO, r4 - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___get_user_asm_q1: - ld.q r3, 0, r5 /* r5 = data */ - st.q r4, 0, r5 - or ZERO, ZERO, r2 - -___get_user_asm_q_exit: - ptabs LINK, tr0 - blink tr0, ZERO - -/* - * extern long __put_user_asm_?(void *pval, long addr) - * - * Inputs: - * (r2) kernel pointer to value - * (r3) dest address (in User Space) - * - * Ouputs: - * (r2) -EFAULT (faulting) - * 0 (not faulting) - */ - .global __put_user_asm_b -__put_user_asm_b: - ld.b r2, 0, r4 /* r4 = data */ - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___put_user_asm_b1: - st.b r3, 0, r4 - or ZERO, ZERO, r2 - -___put_user_asm_b_exit: - ptabs LINK, tr0 - blink tr0, ZERO - - - .global __put_user_asm_w -__put_user_asm_w: - ld.w r2, 0, r4 /* r4 = data */ - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___put_user_asm_w1: - st.w r3, 0, r4 - or ZERO, ZERO, r2 - -___put_user_asm_w_exit: - ptabs LINK, tr0 - blink tr0, ZERO - - - .global __put_user_asm_l -__put_user_asm_l: - ld.l r2, 0, r4 /* r4 = data */ - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___put_user_asm_l1: - st.l r3, 0, r4 - or ZERO, ZERO, r2 - -___put_user_asm_l_exit: - ptabs LINK, tr0 - blink tr0, ZERO - - - .global __put_user_asm_q -__put_user_asm_q: - ld.q r2, 0, r4 /* r4 = data */ - movi -(EFAULT), r2 /* r2 = reply, no real fixup */ - -___put_user_asm_q1: - st.q r3, 0, r4 - or ZERO, ZERO, r2 - -___put_user_asm_q_exit: - ptabs LINK, tr0 - blink tr0, ZERO - -panic_stash_regs: - /* The idea is : when we get an unhandled panic, we dump the registers - to a known memory location, the just sit in a tight loop. - This allows the human to look at the memory region through the GDB - session (assuming the debug module's SHwy initiator isn't locked up - or anything), to hopefully analyze the cause of the panic. */ - - /* On entry, former r15 (SP) is in DCR - former r0 is at resvec_saved_area + 0 - former r1 is at resvec_saved_area + 8 - former tr0 is at resvec_saved_area + 32 - DCR is the only register whose value is lost altogether. - */ - - movi 0xffffffff80000000, r0 ! phy of dump area - ld.q SP, 0x000, r1 ! former r0 - st.q r0, 0x000, r1 - ld.q SP, 0x008, r1 ! former r1 - st.q r0, 0x008, r1 - st.q r0, 0x010, r2 - st.q r0, 0x018, r3 - st.q r0, 0x020, r4 - st.q r0, 0x028, r5 - st.q r0, 0x030, r6 - st.q r0, 0x038, r7 - st.q r0, 0x040, r8 - st.q r0, 0x048, r9 - st.q r0, 0x050, r10 - st.q r0, 0x058, r11 - st.q r0, 0x060, r12 - st.q r0, 0x068, r13 - st.q r0, 0x070, r14 - getcon dcr, r14 - st.q r0, 0x078, r14 - st.q r0, 0x080, r16 - st.q r0, 0x088, r17 - st.q r0, 0x090, r18 - st.q r0, 0x098, r19 - st.q r0, 0x0a0, r20 - st.q r0, 0x0a8, r21 - st.q r0, 0x0b0, r22 - st.q r0, 0x0b8, r23 - st.q r0, 0x0c0, r24 - st.q r0, 0x0c8, r25 - st.q r0, 0x0d0, r26 - st.q r0, 0x0d8, r27 - st.q r0, 0x0e0, r28 - st.q r0, 0x0e8, r29 - st.q r0, 0x0f0, r30 - st.q r0, 0x0f8, r31 - st.q r0, 0x100, r32 - st.q r0, 0x108, r33 - st.q r0, 0x110, r34 - st.q r0, 0x118, r35 - st.q r0, 0x120, r36 - st.q r0, 0x128, r37 - st.q r0, 0x130, r38 - st.q r0, 0x138, r39 - st.q r0, 0x140, r40 - st.q r0, 0x148, r41 - st.q r0, 0x150, r42 - st.q r0, 0x158, r43 - st.q r0, 0x160, r44 - st.q r0, 0x168, r45 - st.q r0, 0x170, r46 - st.q r0, 0x178, r47 - st.q r0, 0x180, r48 - st.q r0, 0x188, r49 - st.q r0, 0x190, r50 - st.q r0, 0x198, r51 - st.q r0, 0x1a0, r52 - st.q r0, 0x1a8, r53 - st.q r0, 0x1b0, r54 - st.q r0, 0x1b8, r55 - st.q r0, 0x1c0, r56 - st.q r0, 0x1c8, r57 - st.q r0, 0x1d0, r58 - st.q r0, 0x1d8, r59 - st.q r0, 0x1e0, r60 - st.q r0, 0x1e8, r61 - st.q r0, 0x1f0, r62 - st.q r0, 0x1f8, r63 ! bogus, but for consistency's sake... - - ld.q SP, 0x020, r1 ! former tr0 - st.q r0, 0x200, r1 - gettr tr1, r1 - st.q r0, 0x208, r1 - gettr tr2, r1 - st.q r0, 0x210, r1 - gettr tr3, r1 - st.q r0, 0x218, r1 - gettr tr4, r1 - st.q r0, 0x220, r1 - gettr tr5, r1 - st.q r0, 0x228, r1 - gettr tr6, r1 - st.q r0, 0x230, r1 - gettr tr7, r1 - st.q r0, 0x238, r1 - - getcon sr, r1 - getcon ssr, r2 - getcon pssr, r3 - getcon spc, r4 - getcon pspc, r5 - getcon intevt, r6 - getcon expevt, r7 - getcon pexpevt, r8 - getcon tra, r9 - getcon tea, r10 - getcon kcr0, r11 - getcon kcr1, r12 - getcon vbr, r13 - getcon resvec, r14 - - st.q r0, 0x240, r1 - st.q r0, 0x248, r2 - st.q r0, 0x250, r3 - st.q r0, 0x258, r4 - st.q r0, 0x260, r5 - st.q r0, 0x268, r6 - st.q r0, 0x270, r7 - st.q r0, 0x278, r8 - st.q r0, 0x280, r9 - st.q r0, 0x288, r10 - st.q r0, 0x290, r11 - st.q r0, 0x298, r12 - st.q r0, 0x2a0, r13 - st.q r0, 0x2a8, r14 - - getcon SPC,r2 - getcon SSR,r3 - getcon EXPEVT,r4 - /* Prepare to jump to C - physical address */ - movi panic_handler-CONFIG_PAGE_OFFSET, r1 - ori r1, 1, r1 - ptabs r1, tr0 - getcon DCR, SP - blink tr0, ZERO - nop - nop - nop - nop - - - - -/* - * --- Signal Handling Section - */ - -/* - * extern long long _sa_default_rt_restorer - * extern long long _sa_default_restorer - * - * or, better, - * - * extern void _sa_default_rt_restorer(void) - * extern void _sa_default_restorer(void) - * - * Code prototypes to do a sys_rt_sigreturn() or sys_sysreturn() - * from user space. Copied into user space by signal management. - * Both must be quad aligned and 2 quad long (4 instructions). - * - */ - .balign 8 - .global sa_default_rt_restorer -sa_default_rt_restorer: - movi 0x10, r9 - shori __NR_rt_sigreturn, r9 - trapa r9 - nop - - .balign 8 - .global sa_default_restorer -sa_default_restorer: - movi 0x10, r9 - shori __NR_sigreturn, r9 - trapa r9 - nop - -/* - * --- __ex_table Section - */ - -/* - * User Access Exception Table. - */ - .section __ex_table, "a" - - .global asm_uaccess_start /* Just a marker */ -asm_uaccess_start: - -#ifdef CONFIG_MMU - .long ___copy_user1, ___copy_user_exit - .long ___copy_user2, ___copy_user_exit - .long ___clear_user1, ___clear_user_exit -#endif - .long ___get_user_asm_b1, ___get_user_asm_b_exit - .long ___get_user_asm_w1, ___get_user_asm_w_exit - .long ___get_user_asm_l1, ___get_user_asm_l_exit - .long ___get_user_asm_q1, ___get_user_asm_q_exit - .long ___put_user_asm_b1, ___put_user_asm_b_exit - .long ___put_user_asm_w1, ___put_user_asm_w_exit - .long ___put_user_asm_l1, ___put_user_asm_l_exit - .long ___put_user_asm_q1, ___put_user_asm_q_exit - - .global asm_uaccess_end /* Just a marker */ -asm_uaccess_end: - - - - -/* - * --- .init.text Section - */ - - __INIT - -/* - * void trap_init (void) - * - */ - .global trap_init -trap_init: - addi SP, -24, SP /* Room to save r28/r29/r30 */ - st.q SP, 0, r28 - st.q SP, 8, r29 - st.q SP, 16, r30 - - /* Set VBR and RESVEC */ - movi LVBR_block, r19 - andi r19, -4, r19 /* reset MMUOFF + reserved */ - /* For RESVEC exceptions we force the MMU off, which means we need the - physical address. */ - movi LRESVEC_block-CONFIG_PAGE_OFFSET, r20 - andi r20, -4, r20 /* reset reserved */ - ori r20, 1, r20 /* set MMUOFF */ - putcon r19, VBR - putcon r20, RESVEC - - /* Sanity check */ - movi LVBR_block_end, r21 - andi r21, -4, r21 - movi BLOCK_SIZE, r29 /* r29 = expected size */ - or r19, ZERO, r30 - add r19, r29, r19 - - /* - * Ugly, but better loop forever now than crash afterwards. - * We should print a message, but if we touch LVBR or - * LRESVEC blocks we should not be surprised if we get stuck - * in trap_init(). - */ - pta trap_init_loop, tr1 - gettr tr1, r28 /* r28 = trap_init_loop */ - sub r21, r30, r30 /* r30 = actual size */ - - /* - * VBR/RESVEC handlers overlap by being bigger than - * allowed. Very bad. Just loop forever. - * (r28) panic/loop address - * (r29) expected size - * (r30) actual size - */ -trap_init_loop: - bne r19, r21, tr1 - - /* Now that exception vectors are set up reset SR.BL */ - getcon SR, r22 - movi SR_UNBLOCK_EXC, r23 - and r22, r23, r22 - putcon r22, SR - - addi SP, 24, SP - ptabs LINK, tr0 - blink tr0, ZERO - diff --git a/arch/sh/kernel/cpu/sh5/fpu.c b/arch/sh/kernel/cpu/sh5/fpu.c deleted file mode 100644 index 3966b5ee8e93..000000000000 --- a/arch/sh/kernel/cpu/sh5/fpu.c +++ /dev/null @@ -1,106 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/sh/kernel/cpu/sh5/fpu.c - * - * Copyright (C) 2001 Manuela Cirronis, Paolo Alberelli - * Copyright (C) 2002 STMicroelectronics Limited - * Author : Stuart Menefy - * - * Started from SH4 version: - * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka - */ -#include -#include -#include - -void save_fpu(struct task_struct *tsk) -{ - asm volatile("fst.p %0, (0*8), fp0\n\t" - "fst.p %0, (1*8), fp2\n\t" - "fst.p %0, (2*8), fp4\n\t" - "fst.p %0, (3*8), fp6\n\t" - "fst.p %0, (4*8), fp8\n\t" - "fst.p %0, (5*8), fp10\n\t" - "fst.p %0, (6*8), fp12\n\t" - "fst.p %0, (7*8), fp14\n\t" - "fst.p %0, (8*8), fp16\n\t" - "fst.p %0, (9*8), fp18\n\t" - "fst.p %0, (10*8), fp20\n\t" - "fst.p %0, (11*8), fp22\n\t" - "fst.p %0, (12*8), fp24\n\t" - "fst.p %0, (13*8), fp26\n\t" - "fst.p %0, (14*8), fp28\n\t" - "fst.p %0, (15*8), fp30\n\t" - "fst.p %0, (16*8), fp32\n\t" - "fst.p %0, (17*8), fp34\n\t" - "fst.p %0, (18*8), fp36\n\t" - "fst.p %0, (19*8), fp38\n\t" - "fst.p %0, (20*8), fp40\n\t" - "fst.p %0, (21*8), fp42\n\t" - "fst.p %0, (22*8), fp44\n\t" - "fst.p %0, (23*8), fp46\n\t" - "fst.p %0, (24*8), fp48\n\t" - "fst.p %0, (25*8), fp50\n\t" - "fst.p %0, (26*8), fp52\n\t" - "fst.p %0, (27*8), fp54\n\t" - "fst.p %0, (28*8), fp56\n\t" - "fst.p %0, (29*8), fp58\n\t" - "fst.p %0, (30*8), fp60\n\t" - "fst.p %0, (31*8), fp62\n\t" - - "fgetscr fr63\n\t" - "fst.s %0, (32*8), fr63\n\t" - : /* no output */ - : "r" (&tsk->thread.xstate->hardfpu) - : "memory"); -} - -void restore_fpu(struct task_struct *tsk) -{ - asm volatile("fld.p %0, (0*8), fp0\n\t" - "fld.p %0, (1*8), fp2\n\t" - "fld.p %0, (2*8), fp4\n\t" - "fld.p %0, (3*8), fp6\n\t" - "fld.p %0, (4*8), fp8\n\t" - "fld.p %0, (5*8), fp10\n\t" - "fld.p %0, (6*8), fp12\n\t" - "fld.p %0, (7*8), fp14\n\t" - "fld.p %0, (8*8), fp16\n\t" - "fld.p %0, (9*8), fp18\n\t" - "fld.p %0, (10*8), fp20\n\t" - "fld.p %0, (11*8), fp22\n\t" - "fld.p %0, (12*8), fp24\n\t" - "fld.p %0, (13*8), fp26\n\t" - "fld.p %0, (14*8), fp28\n\t" - "fld.p %0, (15*8), fp30\n\t" - "fld.p %0, (16*8), fp32\n\t" - "fld.p %0, (17*8), fp34\n\t" - "fld.p %0, (18*8), fp36\n\t" - "fld.p %0, (19*8), fp38\n\t" - "fld.p %0, (20*8), fp40\n\t" - "fld.p %0, (21*8), fp42\n\t" - "fld.p %0, (22*8), fp44\n\t" - "fld.p %0, (23*8), fp46\n\t" - "fld.p %0, (24*8), fp48\n\t" - "fld.p %0, (25*8), fp50\n\t" - "fld.p %0, (26*8), fp52\n\t" - "fld.p %0, (27*8), fp54\n\t" - "fld.p %0, (28*8), fp56\n\t" - "fld.p %0, (29*8), fp58\n\t" - "fld.p %0, (30*8), fp60\n\t" - - "fld.s %0, (32*8), fr63\n\t" - "fputscr fr63\n\t" - - "fld.p %0, (31*8), fp62\n\t" - : /* no output */ - : "r" (&tsk->thread.xstate->hardfpu) - : "memory"); -} - -asmlinkage void do_fpu_error(unsigned long ex, struct pt_regs *regs) -{ - regs->pc += 4; - - force_sig(SIGFPE); -} diff --git a/arch/sh/kernel/cpu/sh5/probe.c b/arch/sh/kernel/cpu/sh5/probe.c deleted file mode 100644 index 947250188065..000000000000 --- a/arch/sh/kernel/cpu/sh5/probe.c +++ /dev/null @@ -1,72 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/sh/kernel/cpu/sh5/probe.c - * - * CPU Subtype Probing for SH-5. - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 - 2007 Paul Mundt - */ -#include -#include -#include -#include -#include -#include - -void cpu_probe(void) -{ - unsigned long long cir; - - /* - * Do peeks in real mode to avoid having to set up a mapping for - * the WPC registers. On SH5-101 cut2, such a mapping would be - * exposed to an address translation erratum which would make it - * hard to set up correctly. - */ - cir = peek_real_address_q(0x0d000008); - if ((cir & 0xffff) == 0x5103) - boot_cpu_data.type = CPU_SH5_103; - else if (((cir >> 32) & 0xffff) == 0x51e2) - /* CPU.VCR aliased at CIR address on SH5-101 */ - boot_cpu_data.type = CPU_SH5_101; - - boot_cpu_data.family = CPU_FAMILY_SH5; - - /* - * First, setup some sane values for the I-cache. - */ - boot_cpu_data.icache.ways = 4; - boot_cpu_data.icache.sets = 256; - boot_cpu_data.icache.linesz = L1_CACHE_BYTES; - boot_cpu_data.icache.way_incr = (1 << 13); - boot_cpu_data.icache.entry_shift = 5; - boot_cpu_data.icache.way_size = boot_cpu_data.icache.sets * - boot_cpu_data.icache.linesz; - boot_cpu_data.icache.entry_mask = 0x1fe0; - boot_cpu_data.icache.flags = 0; - - /* - * Next, setup some sane values for the D-cache. - * - * On the SH5, these are pretty consistent with the I-cache settings, - * so we just copy over the existing definitions.. these can be fixed - * up later, especially if we add runtime CPU probing. - * - * Though in the meantime it saves us from having to duplicate all of - * the above definitions.. - */ - boot_cpu_data.dcache = boot_cpu_data.icache; - - /* - * Setup any cache-related flags here - */ -#if defined(CONFIG_CACHE_WRITETHROUGH) - set_bit(SH_CACHE_MODE_WT, &(boot_cpu_data.dcache.flags)); -#elif defined(CONFIG_CACHE_WRITEBACK) - set_bit(SH_CACHE_MODE_WB, &(boot_cpu_data.dcache.flags)); -#endif - - /* Setup some I/D TLB defaults */ - sh64_tlb_init(); -} diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c deleted file mode 100644 index dc8476d67244..000000000000 --- a/arch/sh/kernel/cpu/sh5/setup-sh5.c +++ /dev/null @@ -1,121 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * SH5-101/SH5-103 CPU Setup - * - * Copyright (C) 2009 Paul Mundt - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct plat_sci_port scif0_platform_data = { - .flags = UPF_IOREMAP, - .scscr = SCSCR_REIE, - .type = PORT_SCIF, -}; - -static struct resource scif0_resources[] = { - DEFINE_RES_MEM(PHYS_PERIPHERAL_BLOCK + 0x01030000, 0x100), - DEFINE_RES_IRQ(39), - DEFINE_RES_IRQ(40), - DEFINE_RES_IRQ(42), -}; - -static struct platform_device scif0_device = { - .name = "sh-sci", - .id = 0, - .resource = scif0_resources, - .num_resources = ARRAY_SIZE(scif0_resources), - .dev = { - .platform_data = &scif0_platform_data, - }, -}; - -static struct resource rtc_resources[] = { - [0] = { - .start = PHYS_PERIPHERAL_BLOCK + 0x01040000, - .end = PHYS_PERIPHERAL_BLOCK + 0x01040000 + 0x58 - 1, - .flags = IORESOURCE_IO, - }, - [1] = { - /* Period IRQ */ - .start = IRQ_PRI, - .flags = IORESOURCE_IRQ, - }, - [2] = { - /* Carry IRQ */ - .start = IRQ_CUI, - .flags = IORESOURCE_IRQ, - }, - [3] = { - /* Alarm IRQ */ - .start = IRQ_ATI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device rtc_device = { - .name = "sh-rtc", - .id = -1, - .num_resources = ARRAY_SIZE(rtc_resources), - .resource = rtc_resources, -}; - -#define TMU_BLOCK_OFF 0x01020000 -#define TMU_BASE PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF - -static struct sh_timer_config tmu0_platform_data = { - .channels_mask = 7, -}; - -static struct resource tmu0_resources[] = { - DEFINE_RES_MEM(TMU_BASE, 0x30), - DEFINE_RES_IRQ(IRQ_TUNI0), - DEFINE_RES_IRQ(IRQ_TUNI1), - DEFINE_RES_IRQ(IRQ_TUNI2), -}; - -static struct platform_device tmu0_device = { - .name = "sh-tmu", - .id = 0, - .dev = { - .platform_data = &tmu0_platform_data, - }, - .resource = tmu0_resources, - .num_resources = ARRAY_SIZE(tmu0_resources), -}; - -static struct platform_device *sh5_early_devices[] __initdata = { - &scif0_device, - &tmu0_device, -}; - -static struct platform_device *sh5_devices[] __initdata = { - &rtc_device, -}; - -static int __init sh5_devices_setup(void) -{ - int ret; - - ret = platform_add_devices(sh5_early_devices, - ARRAY_SIZE(sh5_early_devices)); - if (unlikely(ret != 0)) - return ret; - - return platform_add_devices(sh5_devices, - ARRAY_SIZE(sh5_devices)); -} -arch_initcall(sh5_devices_setup); - -void __init plat_early_device_setup(void) -{ - sh_early_platform_add_devices(sh5_early_devices, - ARRAY_SIZE(sh5_early_devices)); -} diff --git a/arch/sh/kernel/cpu/sh5/switchto.S b/arch/sh/kernel/cpu/sh5/switchto.S deleted file mode 100644 index d1beff755632..000000000000 --- a/arch/sh/kernel/cpu/sh5/switchto.S +++ /dev/null @@ -1,195 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * arch/sh/kernel/cpu/sh5/switchto.S - * - * sh64 context switch - * - * Copyright (C) 2004 Richard Curnow -*/ - - .section .text..SHmedia32,"ax" - .little - - .balign 32 - - .type sh64_switch_to,@function - .global sh64_switch_to - .global __sh64_switch_to_end -sh64_switch_to: - -/* Incoming args - r2 - prev - r3 - &prev->thread - r4 - next - r5 - &next->thread - - Outgoing results - r2 - last (=prev) : this just stays in r2 throughout - - Want to create a full (struct pt_regs) on the stack to allow backtracing - functions to work. However, we only need to populate the callee-save - register slots in this structure; since we're a function our ancestors must - have themselves preserved all caller saved state in the stack. This saves - some wasted effort since we won't need to look at the values. - - In particular, all caller-save registers are immediately available for - scratch use. - -*/ - -#define FRAME_SIZE (76*8 + 8) - - movi FRAME_SIZE, r0 - sub.l r15, r0, r15 - ! Do normal-style register save to support backtrace - - st.l r15, 0, r18 ! save link reg - st.l r15, 4, r14 ! save fp - add.l r15, r63, r14 ! setup frame pointer - - ! hopefully this looks normal to the backtrace now. - - addi.l r15, 8, r1 ! base of pt_regs - addi.l r1, 24, r0 ! base of pt_regs.regs - addi.l r0, (63*8), r8 ! base of pt_regs.trregs - - /* Note : to be fixed? - struct pt_regs is really designed for holding the state on entry - to an exception, i.e. pc,sr,regs etc. However, for the context - switch state, some of this is not required. But the unwinder takes - struct pt_regs * as an arg so we have to build this structure - to allow unwinding switched tasks in show_state() */ - - st.q r0, ( 9*8), r9 - st.q r0, (10*8), r10 - st.q r0, (11*8), r11 - st.q r0, (12*8), r12 - st.q r0, (13*8), r13 - st.q r0, (14*8), r14 ! for unwind, want to look as though we took a trap at - ! the point where the process is left in suspended animation, i.e. current - ! fp here, not the saved one. - st.q r0, (16*8), r16 - - st.q r0, (24*8), r24 - st.q r0, (25*8), r25 - st.q r0, (26*8), r26 - st.q r0, (27*8), r27 - st.q r0, (28*8), r28 - st.q r0, (29*8), r29 - st.q r0, (30*8), r30 - st.q r0, (31*8), r31 - st.q r0, (32*8), r32 - st.q r0, (33*8), r33 - st.q r0, (34*8), r34 - st.q r0, (35*8), r35 - - st.q r0, (44*8), r44 - st.q r0, (45*8), r45 - st.q r0, (46*8), r46 - st.q r0, (47*8), r47 - st.q r0, (48*8), r48 - st.q r0, (49*8), r49 - st.q r0, (50*8), r50 - st.q r0, (51*8), r51 - st.q r0, (52*8), r52 - st.q r0, (53*8), r53 - st.q r0, (54*8), r54 - st.q r0, (55*8), r55 - st.q r0, (56*8), r56 - st.q r0, (57*8), r57 - st.q r0, (58*8), r58 - st.q r0, (59*8), r59 - - ! do this early as pta->gettr has no pipeline forwarding (=> 5 cycle latency) - ! Use a local label to avoid creating a symbol that will confuse the ! - ! backtrace - pta .Lsave_pc, tr0 - - gettr tr5, r45 - gettr tr6, r46 - gettr tr7, r47 - st.q r8, (5*8), r45 - st.q r8, (6*8), r46 - st.q r8, (7*8), r47 - - ! Now switch context - gettr tr0, r9 - st.l r3, 0, r15 ! prev->thread.sp - st.l r3, 8, r1 ! prev->thread.kregs - st.l r3, 4, r9 ! prev->thread.pc - st.q r1, 0, r9 ! save prev->thread.pc into pt_regs->pc - - ! Load PC for next task (init value or save_pc later) - ld.l r5, 4, r18 ! next->thread.pc - ! Switch stacks - ld.l r5, 0, r15 ! next->thread.sp - ptabs r18, tr0 - - ! Update current - ld.l r4, 4, r9 ! next->thread_info (2nd element of next task_struct) - putcon r9, kcr0 ! current = next->thread_info - - ! go to save_pc for a reschedule, or the initial thread.pc for a new process - blink tr0, r63 - - ! Restore (when we come back to a previously saved task) -.Lsave_pc: - addi.l r15, 32, r0 ! r0 = next's regs - addi.l r0, (63*8), r8 ! r8 = next's tr_regs - - ld.q r8, (5*8), r45 - ld.q r8, (6*8), r46 - ld.q r8, (7*8), r47 - ptabs r45, tr5 - ptabs r46, tr6 - ptabs r47, tr7 - - ld.q r0, ( 9*8), r9 - ld.q r0, (10*8), r10 - ld.q r0, (11*8), r11 - ld.q r0, (12*8), r12 - ld.q r0, (13*8), r13 - ld.q r0, (14*8), r14 - ld.q r0, (16*8), r16 - - ld.q r0, (24*8), r24 - ld.q r0, (25*8), r25 - ld.q r0, (26*8), r26 - ld.q r0, (27*8), r27 - ld.q r0, (28*8), r28 - ld.q r0, (29*8), r29 - ld.q r0, (30*8), r30 - ld.q r0, (31*8), r31 - ld.q r0, (32*8), r32 - ld.q r0, (33*8), r33 - ld.q r0, (34*8), r34 - ld.q r0, (35*8), r35 - - ld.q r0, (44*8), r44 - ld.q r0, (45*8), r45 - ld.q r0, (46*8), r46 - ld.q r0, (47*8), r47 - ld.q r0, (48*8), r48 - ld.q r0, (49*8), r49 - ld.q r0, (50*8), r50 - ld.q r0, (51*8), r51 - ld.q r0, (52*8), r52 - ld.q r0, (53*8), r53 - ld.q r0, (54*8), r54 - ld.q r0, (55*8), r55 - ld.q r0, (56*8), r56 - ld.q r0, (57*8), r57 - ld.q r0, (58*8), r58 - ld.q r0, (59*8), r59 - - ! epilogue - ld.l r15, 0, r18 - ld.l r15, 4, r14 - ptabs r18, tr0 - movi FRAME_SIZE, r0 - add r15, r0, r15 - blink tr0, r63 -__sh64_switch_to_end: -.LFE1: - .size sh64_switch_to,.LFE1-sh64_switch_to - diff --git a/arch/sh/kernel/cpu/sh5/unwind.c b/arch/sh/kernel/cpu/sh5/unwind.c deleted file mode 100644 index 3cb0cd9cea29..000000000000 --- a/arch/sh/kernel/cpu/sh5/unwind.c +++ /dev/null @@ -1,342 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/sh/kernel/cpu/sh5/unwind.c - * - * Copyright (C) 2004 Paul Mundt - * Copyright (C) 2004 Richard Curnow - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static u8 regcache[63]; - -/* - * Finding the previous stack frame isn't horribly straightforward as it is - * on some other platforms. In the sh64 case, we don't have "linked" stack - * frames, so we need to do a bit of work to determine the previous frame, - * and in turn, the previous r14/r18 pair. - * - * There are generally a few cases which determine where we can find out - * the r14/r18 values. In the general case, this can be determined by poking - * around the prologue of the symbol PC is in (note that we absolutely must - * have frame pointer support as well as the kernel symbol table mapped, - * otherwise we can't even get this far). - * - * In other cases, such as the interrupt/exception path, we can poke around - * the sp/fp. - * - * Notably, this entire approach is somewhat error prone, and in the event - * that the previous frame cannot be determined, that's all we can do. - * Either way, this still leaves us with a more correct backtrace then what - * we would be able to come up with by walking the stack (which is garbage - * for anything beyond the first frame). - * -- PFM. - */ -static int lookup_prev_stack_frame(unsigned long fp, unsigned long pc, - unsigned long *pprev_fp, unsigned long *pprev_pc, - struct pt_regs *regs) -{ - const char *sym; - char namebuf[128]; - unsigned long offset; - unsigned long prologue = 0; - unsigned long fp_displacement = 0; - unsigned long fp_prev = 0; - unsigned long offset_r14 = 0, offset_r18 = 0; - int i, found_prologue_end = 0; - - sym = kallsyms_lookup(pc, NULL, &offset, NULL, namebuf); - if (!sym) - return -EINVAL; - - prologue = pc - offset; - if (!prologue) - return -EINVAL; - - /* Validate fp, to avoid risk of dereferencing a bad pointer later. - Assume 128Mb since that's the amount of RAM on a Cayman. Modify - when there is an SH-5 board with more. */ - if ((fp < (unsigned long) phys_to_virt(__MEMORY_START)) || - (fp >= (unsigned long)(phys_to_virt(__MEMORY_START)) + 128*1024*1024) || - ((fp & 7) != 0)) { - return -EINVAL; - } - - /* - * Depth to walk, depth is completely arbitrary. - */ - for (i = 0; i < 100; i++, prologue += sizeof(unsigned long)) { - unsigned long op; - u8 major, minor; - u8 src, dest, disp; - - op = *(unsigned long *)prologue; - - major = (op >> 26) & 0x3f; - src = (op >> 20) & 0x3f; - minor = (op >> 16) & 0xf; - disp = (op >> 10) & 0x3f; - dest = (op >> 4) & 0x3f; - - /* - * Stack frame creation happens in a number of ways.. in the - * general case when the stack frame is less than 511 bytes, - * it's generally created by an addi or addi.l: - * - * addi/addi.l r15, -FRAME_SIZE, r15 - * - * in the event that the frame size is bigger than this, it's - * typically created using a movi/sub pair as follows: - * - * movi FRAME_SIZE, rX - * sub r15, rX, r15 - */ - - switch (major) { - case (0x00 >> 2): - switch (minor) { - case 0x8: /* add.l */ - case 0x9: /* add */ - /* Look for r15, r63, r14 */ - if (src == 15 && disp == 63 && dest == 14) - found_prologue_end = 1; - - break; - case 0xa: /* sub.l */ - case 0xb: /* sub */ - if (src != 15 || dest != 15) - continue; - - fp_displacement -= regcache[disp]; - fp_prev = fp - fp_displacement; - break; - } - break; - case (0xa8 >> 2): /* st.l */ - if (src != 15) - continue; - - switch (dest) { - case 14: - if (offset_r14 || fp_displacement == 0) - continue; - - offset_r14 = (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54); - offset_r14 *= sizeof(unsigned long); - offset_r14 += fp_displacement; - break; - case 18: - if (offset_r18 || fp_displacement == 0) - continue; - - offset_r18 = (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54); - offset_r18 *= sizeof(unsigned long); - offset_r18 += fp_displacement; - break; - } - - break; - case (0xcc >> 2): /* movi */ - if (dest >= 63) { - printk(KERN_NOTICE "%s: Invalid dest reg %d " - "specified in movi handler. Failed " - "opcode was 0x%lx: ", __func__, - dest, op); - - continue; - } - - /* Sign extend */ - regcache[dest] = - sign_extend64((((u64)op >> 10) & 0xffff), 9); - break; - case (0xd0 >> 2): /* addi */ - case (0xd4 >> 2): /* addi.l */ - /* Look for r15, -FRAME_SIZE, r15 */ - if (src != 15 || dest != 15) - continue; - - /* Sign extended frame size.. */ - fp_displacement += - (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54); - fp_prev = fp - fp_displacement; - break; - } - - if (found_prologue_end && offset_r14 && (offset_r18 || *pprev_pc) && fp_prev) - break; - } - - if (offset_r14 == 0 || fp_prev == 0) { - if (!offset_r14) - pr_debug("Unable to find r14 offset\n"); - if (!fp_prev) - pr_debug("Unable to find previous fp\n"); - - return -EINVAL; - } - - /* For innermost leaf function, there might not be a offset_r18 */ - if (!*pprev_pc && (offset_r18 == 0)) - return -EINVAL; - - *pprev_fp = *(unsigned long *)(fp_prev + offset_r14); - - if (offset_r18) - *pprev_pc = *(unsigned long *)(fp_prev + offset_r18); - - *pprev_pc &= ~1; - - return 0; -} - -/* - * Don't put this on the stack since we'll want to call in to - * sh64_unwinder_dump() when we're close to underflowing the stack - * anyway. - */ -static struct pt_regs here_regs; - -extern const char syscall_ret; -extern const char ret_from_syscall; -extern const char ret_from_exception; -extern const char ret_from_irq; - -static void sh64_unwind_inner(const struct stacktrace_ops *ops, - void *data, struct pt_regs *regs); - -static inline void unwind_nested(const struct stacktrace_ops *ops, void *data, - unsigned long pc, unsigned long fp) -{ - if ((fp >= __MEMORY_START) && - ((fp & 7) == 0)) - sh64_unwind_inner(ops, data, (struct pt_regs *)fp); -} - -static void sh64_unwind_inner(const struct stacktrace_ops *ops, - void *data, struct pt_regs *regs) -{ - unsigned long pc, fp; - int ofs = 0; - int first_pass; - - pc = regs->pc & ~1; - fp = regs->regs[14]; - - first_pass = 1; - for (;;) { - int cond; - unsigned long next_fp, next_pc; - - if (pc == ((unsigned long)&syscall_ret & ~1)) { - printk("SYSCALL\n"); - unwind_nested(ops, data, pc, fp); - return; - } - - if (pc == ((unsigned long)&ret_from_syscall & ~1)) { - printk("SYSCALL (PREEMPTED)\n"); - unwind_nested(ops, data, pc, fp); - return; - } - - /* In this case, the PC is discovered by lookup_prev_stack_frame but - it has 4 taken off it to look like the 'caller' */ - if (pc == ((unsigned long)&ret_from_exception & ~1)) { - printk("EXCEPTION\n"); - unwind_nested(ops, data, pc, fp); - return; - } - - if (pc == ((unsigned long)&ret_from_irq & ~1)) { - printk("IRQ\n"); - unwind_nested(ops, data, pc, fp); - return; - } - - cond = ((pc >= __MEMORY_START) && (fp >= __MEMORY_START) && - ((pc & 3) == 0) && ((fp & 7) == 0)); - - pc -= ofs; - - ops->address(data, pc, 1); - - if (first_pass) { - /* If the innermost frame is a leaf function, it's - * possible that r18 is never saved out to the stack. - */ - next_pc = regs->regs[18]; - } else { - next_pc = 0; - } - - if (lookup_prev_stack_frame(fp, pc, &next_fp, &next_pc, regs) == 0) { - ofs = sizeof(unsigned long); - pc = next_pc & ~1; - fp = next_fp; - } else { - printk("Unable to lookup previous stack frame\n"); - break; - } - first_pass = 0; - } - - printk("\n"); -} - -static void sh64_unwinder_dump(struct task_struct *task, - struct pt_regs *regs, - unsigned long *sp, - const struct stacktrace_ops *ops, - void *data) -{ - if (!regs) { - /* - * Fetch current regs if we have no other saved state to back - * trace from. - */ - regs = &here_regs; - - __asm__ __volatile__ ("ori r14, 0, %0" : "=r" (regs->regs[14])); - __asm__ __volatile__ ("ori r15, 0, %0" : "=r" (regs->regs[15])); - __asm__ __volatile__ ("ori r18, 0, %0" : "=r" (regs->regs[18])); - - __asm__ __volatile__ ("gettr tr0, %0" : "=r" (regs->tregs[0])); - __asm__ __volatile__ ("gettr tr1, %0" : "=r" (regs->tregs[1])); - __asm__ __volatile__ ("gettr tr2, %0" : "=r" (regs->tregs[2])); - __asm__ __volatile__ ("gettr tr3, %0" : "=r" (regs->tregs[3])); - __asm__ __volatile__ ("gettr tr4, %0" : "=r" (regs->tregs[4])); - __asm__ __volatile__ ("gettr tr5, %0" : "=r" (regs->tregs[5])); - __asm__ __volatile__ ("gettr tr6, %0" : "=r" (regs->tregs[6])); - __asm__ __volatile__ ("gettr tr7, %0" : "=r" (regs->tregs[7])); - - __asm__ __volatile__ ( - "pta 0f, tr0\n\t" - "blink tr0, %0\n\t" - "0: nop" - : "=r" (regs->pc) - ); - } - - sh64_unwind_inner(ops, data, regs); -} - -static struct unwinder sh64_unwinder = { - .name = "sh64-unwinder", - .dump = sh64_unwinder_dump, - .rating = 150, -}; - -static int __init sh64_unwinder_init(void) -{ - return unwinder_register(&sh64_unwinder); -} -early_initcall(sh64_unwinder_init); diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S deleted file mode 100644 index 67685e1f00e1..000000000000 --- a/arch/sh/kernel/head_64.S +++ /dev/null @@ -1,346 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * arch/sh/kernel/head_64.S - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - */ - -#include - -#include -#include -#include -#include -#include -#include - -/* - * MMU defines: TLB boundaries. - */ - -#define MMUIR_FIRST ITLB_FIXED -#define MMUIR_END ITLB_LAST_VAR_UNRESTRICTED+TLB_STEP -#define MMUIR_STEP TLB_STEP - -#define MMUDR_FIRST DTLB_FIXED -#define MMUDR_END DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP -#define MMUDR_STEP TLB_STEP - -/* Safety check : CONFIG_PAGE_OFFSET has to be a multiple of 512Mb */ -#if (CONFIG_PAGE_OFFSET & ((1UL<<29)-1)) -#error "CONFIG_PAGE_OFFSET must be a multiple of 512Mb" -#endif - -/* - * MMU defines: Fixed TLBs. - */ -/* Deal safely with the case where the base of RAM is not 512Mb aligned */ - -#define ALIGN_512M_MASK (0xffffffffe0000000) -#define ALIGNED_EFFECTIVE ((CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START) & ALIGN_512M_MASK) -#define ALIGNED_PHYSICAL (CONFIG_MEMORY_START & ALIGN_512M_MASK) - -#define MMUIR_TEXT_H (0x0000000000000003 | ALIGNED_EFFECTIVE) - /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */ - -#define MMUIR_TEXT_L (0x000000000000009a | ALIGNED_PHYSICAL) - /* 512 Mb, Cacheable, Write-back, execute, Not User, Ph. Add. */ - -#define MMUDR_CACHED_H 0x0000000000000003 | ALIGNED_EFFECTIVE - /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */ -#define MMUDR_CACHED_L 0x000000000000015a | ALIGNED_PHYSICAL - /* 512 Mb, Cacheable, Write-back, read/write, Not User, Ph. Add. */ - -#ifdef CONFIG_CACHE_OFF -#define ICCR0_INIT_VAL ICCR0_OFF /* ICACHE off */ -#else -#define ICCR0_INIT_VAL ICCR0_ON | ICCR0_ICI /* ICE + ICI */ -#endif -#define ICCR1_INIT_VAL ICCR1_NOLOCK /* No locking */ - -#if defined (CONFIG_CACHE_OFF) -#define OCCR0_INIT_VAL OCCR0_OFF /* D-cache: off */ -#elif defined (CONFIG_CACHE_WRITETHROUGH) -#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WT /* D-cache: on, */ - /* WT, invalidate */ -#elif defined (CONFIG_CACHE_WRITEBACK) -#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WB /* D-cache: on, */ - /* WB, invalidate */ -#else -#error preprocessor flag CONFIG_CACHE_... not recognized! -#endif - -#define OCCR1_INIT_VAL OCCR1_NOLOCK /* No locking */ - - .section .empty_zero_page, "aw" - .global empty_zero_page - -empty_zero_page: - .long 1 /* MOUNT_ROOT_RDONLY */ - .long 0 /* RAMDISK_FLAGS */ - .long 0x0200 /* ORIG_ROOT_DEV */ - .long 1 /* LOADER_TYPE */ - .long 0x00800000 /* INITRD_START */ - .long 0x00800000 /* INITRD_SIZE */ - .long 0 - - .text - .balign 4096,0,4096 - - .section .data, "aw" - .balign PAGE_SIZE - - .section .data, "aw" - .balign PAGE_SIZE - - .global mmu_pdtp_cache -mmu_pdtp_cache: - .space PAGE_SIZE, 0 - - .global fpu_in_use -fpu_in_use: .quad 0 - - - __HEAD - .balign L1_CACHE_BYTES -/* - * Condition at the entry of __stext: - * . Reset state: - * . SR.FD = 1 (FPU disabled) - * . SR.BL = 1 (Exceptions disabled) - * . SR.MD = 1 (Privileged Mode) - * . SR.MMU = 0 (MMU Disabled) - * . SR.CD = 0 (CTC User Visible) - * . SR.IMASK = Undefined (Interrupt Mask) - * - * Operations supposed to be performed by __stext: - * . prevent speculative fetch onto device memory while MMU is off - * . reflect as much as possible SH5 ABI (r15, r26, r27, r18) - * . first, save CPU state and set it to something harmless - * . any CPU detection and/or endianness settings (?) - * . initialize EMI/LMI (but not TMU/RTC/INTC/SCIF): TBD - * . set initial TLB entries for cached and uncached regions - * (no fine granularity paging) - * . set initial cache state - * . enable MMU and caches - * . set CPU to a consistent state - * . registers (including stack pointer and current/KCR0) - * . NOT expecting to set Exception handling nor VBR/RESVEC/DCR - * at this stage. This is all to later Linux initialization steps. - * . initialize FPU - * . clear BSS - * . jump into start_kernel() - * . be prepared to hopeless start_kernel() returns. - * - */ - .global _stext -_stext: - /* - * Prevent speculative fetch on device memory due to - * uninitialized target registers. - */ - ptabs/u ZERO, tr0 - ptabs/u ZERO, tr1 - ptabs/u ZERO, tr2 - ptabs/u ZERO, tr3 - ptabs/u ZERO, tr4 - ptabs/u ZERO, tr5 - ptabs/u ZERO, tr6 - ptabs/u ZERO, tr7 - synci - - /* - * Read/Set CPU state. After this block: - * r29 = Initial SR - */ - getcon SR, r29 - movi SR_HARMLESS, r20 - putcon r20, SR - - /* - * Initialize EMI/LMI. To Be Done. - */ - - /* - * CPU detection and/or endianness settings (?). To Be Done. - * Pure PIC code here, please ! Just save state into r30. - * After this block: - * r30 = CPU type/Platform Endianness - */ - - /* - * Set initial TLB entries for cached and uncached regions. - * Note: PTA/BLINK is PIC code, PTABS/BLINK isn't ! - */ - /* Clear ITLBs */ - pta clear_ITLB, tr1 - movi MMUIR_FIRST, r21 - movi MMUIR_END, r22 -clear_ITLB: - putcfg r21, 0, ZERO /* Clear MMUIR[n].PTEH.V */ - addi r21, MMUIR_STEP, r21 - bne r21, r22, tr1 - - /* Clear DTLBs */ - pta clear_DTLB, tr1 - movi MMUDR_FIRST, r21 - movi MMUDR_END, r22 -clear_DTLB: - putcfg r21, 0, ZERO /* Clear MMUDR[n].PTEH.V */ - addi r21, MMUDR_STEP, r21 - bne r21, r22, tr1 - - /* Map one big (512Mb) page for ITLB */ - movi MMUIR_FIRST, r21 - movi MMUIR_TEXT_L, r22 /* PTEL first */ - add.l r22, r63, r22 /* Sign extend */ - putcfg r21, 1, r22 /* Set MMUIR[0].PTEL */ - movi MMUIR_TEXT_H, r22 /* PTEH last */ - add.l r22, r63, r22 /* Sign extend */ - putcfg r21, 0, r22 /* Set MMUIR[0].PTEH */ - - /* Map one big CACHED (512Mb) page for DTLB */ - movi MMUDR_FIRST, r21 - movi MMUDR_CACHED_L, r22 /* PTEL first */ - add.l r22, r63, r22 /* Sign extend */ - putcfg r21, 1, r22 /* Set MMUDR[0].PTEL */ - movi MMUDR_CACHED_H, r22 /* PTEH last */ - add.l r22, r63, r22 /* Sign extend */ - putcfg r21, 0, r22 /* Set MMUDR[0].PTEH */ - - /* - * Setup a DTLB translation for SCIF phys. - */ - addi r21, MMUDR_STEP, r21 - movi 0x0a03, r22 /* SCIF phys */ - shori 0x0148, r22 - putcfg r21, 1, r22 /* PTEL first */ - movi 0xfa03, r22 /* 0xfa030000, fixed SCIF virt */ - shori 0x0003, r22 - putcfg r21, 0, r22 /* PTEH last */ - - /* - * Set cache behaviours. - */ - /* ICache */ - movi ICCR_BASE, r21 - movi ICCR0_INIT_VAL, r22 - movi ICCR1_INIT_VAL, r23 - putcfg r21, ICCR_REG0, r22 - putcfg r21, ICCR_REG1, r23 - - /* OCache */ - movi OCCR_BASE, r21 - movi OCCR0_INIT_VAL, r22 - movi OCCR1_INIT_VAL, r23 - putcfg r21, OCCR_REG0, r22 - putcfg r21, OCCR_REG1, r23 - - - /* - * Enable Caches and MMU. Do the first non-PIC jump. - * Now head.S global variables, constants and externs - * can be used. - */ - getcon SR, r21 - movi SR_ENABLE_MMU, r22 - or r21, r22, r21 - putcon r21, SSR - movi hyperspace, r22 - ori r22, 1, r22 /* Make it SHmedia, not required but..*/ - putcon r22, SPC - synco - rte /* And now go into the hyperspace ... */ -hyperspace: /* ... that's the next instruction ! */ - - /* - * Set CPU to a consistent state. - * r31 = FPU support flag - * tr0/tr7 in use. Others give a chance to loop somewhere safe - */ - movi start_kernel, r32 - ori r32, 1, r32 - - ptabs r32, tr0 /* r32 = _start_kernel address */ - pta/u hopeless, tr1 - pta/u hopeless, tr2 - pta/u hopeless, tr3 - pta/u hopeless, tr4 - pta/u hopeless, tr5 - pta/u hopeless, tr6 - pta/u hopeless, tr7 - gettr tr1, r28 /* r28 = hopeless address */ - - /* Set initial stack pointer */ - movi init_thread_union, SP - putcon SP, KCR0 /* Set current to init_task */ - movi THREAD_SIZE, r22 /* Point to the end */ - add SP, r22, SP - - /* - * Initialize FPU. - * Keep FPU flag in r31. After this block: - * r31 = FPU flag - */ - movi fpu_in_use, r31 /* Temporary */ - -#ifdef CONFIG_SH_FPU - getcon SR, r21 - movi SR_ENABLE_FPU, r22 - and r21, r22, r22 - putcon r22, SR /* Try to enable */ - getcon SR, r22 - xor r21, r22, r21 - shlri r21, 15, r21 /* Supposedly 0/1 */ - st.q r31, 0 , r21 /* Set fpu_in_use */ -#else - movi 0, r21 - st.q r31, 0 , r21 /* Set fpu_in_use */ -#endif - or r21, ZERO, r31 /* Set FPU flag at last */ - -#ifndef CONFIG_SH_NO_BSS_INIT -/* Don't clear BSS if running on slow platforms such as an RTL simulation, - remote memory via SHdebug link, etc. For these the memory can be guaranteed - to be all zero on boot anyway. */ - /* - * Clear bss - */ - pta clear_quad, tr1 - movi __bss_start, r22 - movi _end, r23 -clear_quad: - st.q r22, 0, ZERO - addi r22, 8, r22 - bne r22, r23, tr1 /* Both quad aligned, see vmlinux.lds.S */ -#endif - pta/u hopeless, tr1 - - /* Say bye to head.S but be prepared to wrongly get back ... */ - blink tr0, LINK - - /* If we ever get back here through LINK/tr1-tr7 */ - pta/u hopeless, tr7 - -hopeless: - /* - * Something's badly wrong here. Loop endlessly, - * there's nothing more we can do about it. - * - * Note on hopeless: it can be jumped into invariably - * before or after jumping into hyperspace. The only - * requirement is to be PIC called (PTA) before and - * any way (PTA/PTABS) after. According to Virtual - * to Physical mapping a simulator/emulator can easily - * tell where we came here from just looking at hopeless - * (PC) address. - * - * For debugging purposes: - * (r28) hopeless/loop address - * (r29) Original SR - * (r30) CPU type/Platform endianness - * (r31) FPU Support - * (r32) _start_kernel address - */ - blink tr7, ZERO diff --git a/arch/sh/kernel/irq_64.c b/arch/sh/kernel/irq_64.c deleted file mode 100644 index 7a1f50435e33..000000000000 --- a/arch/sh/kernel/irq_64.c +++ /dev/null @@ -1,48 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * SHmedia irqflags support - * - * Copyright (C) 2006 - 2009 Paul Mundt - */ -#include -#include -#include - -void notrace arch_local_irq_restore(unsigned long flags) -{ - unsigned long long __dummy; - - if (flags == ARCH_IRQ_DISABLED) { - __asm__ __volatile__ ( - "getcon " __SR ", %0\n\t" - "or %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy) - : "r" (ARCH_IRQ_DISABLED) - ); - } else { - __asm__ __volatile__ ( - "getcon " __SR ", %0\n\t" - "and %0, %1, %0\n\t" - "putcon %0, " __SR "\n\t" - : "=&r" (__dummy) - : "r" (~ARCH_IRQ_DISABLED) - ); - } -} -EXPORT_SYMBOL(arch_local_irq_restore); - -unsigned long notrace arch_local_save_flags(void) -{ - unsigned long flags; - - __asm__ __volatile__ ( - "getcon " __SR ", %0\n\t" - "and %0, %1, %0" - : "=&r" (flags) - : "r" (ARCH_IRQ_DISABLED) - ); - - return flags; -} -EXPORT_SYMBOL(arch_local_save_flags); diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c index bbc78d1d618e..b9cee98a754e 100644 --- a/arch/sh/kernel/module.c +++ b/arch/sh/kernel/module.c @@ -46,15 +46,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, + ELF32_R_SYM(rel[i].r_info); relocation = sym->st_value + rel[i].r_addend; -#ifdef CONFIG_SUPERH64 - /* For text addresses, bit2 of the st_other field indicates - * whether the symbol is SHmedia (1) or SHcompact (0). If - * SHmedia, the LSB of the symbol needs to be asserted - * for the CPU to be in SHmedia mode when it starts executing - * the branch target. */ - relocation |= !!(sym->st_other & 4); -#endif - switch (ELF32_R_TYPE(rel[i].r_info)) { case R_SH_NONE: break; diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 4d1bfc848dd3..169832fcf21b 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -23,9 +23,7 @@ EXPORT_SYMBOL(__stack_chk_guard); */ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) { -#ifdef CONFIG_SUPERH32 unlazy_fpu(src, task_pt_regs(src)); -#endif *dst = *src; if (src->thread.xstate) { diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c deleted file mode 100644 index c2844a2e18cd..000000000000 --- a/arch/sh/kernel/process_64.c +++ /dev/null @@ -1,461 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/sh/kernel/process_64.c - * - * This file handles the architecture-dependent parts of process handling.. - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 - 2007 Paul Mundt - * Copyright (C) 2003, 2004 Richard Curnow - * - * Started from SH3/4 version: - * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima - * - * In turn started from i386 version: - * Copyright (C) 1995 Linus Torvalds - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct task_struct *last_task_used_math = NULL; -struct pt_regs fake_swapper_regs = { 0, }; - -void show_regs(struct pt_regs *regs) -{ - unsigned long long ah, al, bh, bl, ch, cl; - - printk("\n"); - show_regs_print_info(KERN_DEFAULT); - - ah = (regs->pc) >> 32; - al = (regs->pc) & 0xffffffff; - bh = (regs->regs[18]) >> 32; - bl = (regs->regs[18]) & 0xffffffff; - ch = (regs->regs[15]) >> 32; - cl = (regs->regs[15]) & 0xffffffff; - printk("PC : %08Lx%08Lx LINK: %08Lx%08Lx SP : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->sr) >> 32; - al = (regs->sr) & 0xffffffff; - asm volatile ("getcon " __TEA ", %0" : "=r" (bh)); - asm volatile ("getcon " __TEA ", %0" : "=r" (bl)); - bh = (bh) >> 32; - bl = (bl) & 0xffffffff; - asm volatile ("getcon " __KCR0 ", %0" : "=r" (ch)); - asm volatile ("getcon " __KCR0 ", %0" : "=r" (cl)); - ch = (ch) >> 32; - cl = (cl) & 0xffffffff; - printk("SR : %08Lx%08Lx TEA : %08Lx%08Lx KCR0: %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[0]) >> 32; - al = (regs->regs[0]) & 0xffffffff; - bh = (regs->regs[1]) >> 32; - bl = (regs->regs[1]) & 0xffffffff; - ch = (regs->regs[2]) >> 32; - cl = (regs->regs[2]) & 0xffffffff; - printk("R0 : %08Lx%08Lx R1 : %08Lx%08Lx R2 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[3]) >> 32; - al = (regs->regs[3]) & 0xffffffff; - bh = (regs->regs[4]) >> 32; - bl = (regs->regs[4]) & 0xffffffff; - ch = (regs->regs[5]) >> 32; - cl = (regs->regs[5]) & 0xffffffff; - printk("R3 : %08Lx%08Lx R4 : %08Lx%08Lx R5 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[6]) >> 32; - al = (regs->regs[6]) & 0xffffffff; - bh = (regs->regs[7]) >> 32; - bl = (regs->regs[7]) & 0xffffffff; - ch = (regs->regs[8]) >> 32; - cl = (regs->regs[8]) & 0xffffffff; - printk("R6 : %08Lx%08Lx R7 : %08Lx%08Lx R8 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[9]) >> 32; - al = (regs->regs[9]) & 0xffffffff; - bh = (regs->regs[10]) >> 32; - bl = (regs->regs[10]) & 0xffffffff; - ch = (regs->regs[11]) >> 32; - cl = (regs->regs[11]) & 0xffffffff; - printk("R9 : %08Lx%08Lx R10 : %08Lx%08Lx R11 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[12]) >> 32; - al = (regs->regs[12]) & 0xffffffff; - bh = (regs->regs[13]) >> 32; - bl = (regs->regs[13]) & 0xffffffff; - ch = (regs->regs[14]) >> 32; - cl = (regs->regs[14]) & 0xffffffff; - printk("R12 : %08Lx%08Lx R13 : %08Lx%08Lx R14 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[16]) >> 32; - al = (regs->regs[16]) & 0xffffffff; - bh = (regs->regs[17]) >> 32; - bl = (regs->regs[17]) & 0xffffffff; - ch = (regs->regs[19]) >> 32; - cl = (regs->regs[19]) & 0xffffffff; - printk("R16 : %08Lx%08Lx R17 : %08Lx%08Lx R19 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[20]) >> 32; - al = (regs->regs[20]) & 0xffffffff; - bh = (regs->regs[21]) >> 32; - bl = (regs->regs[21]) & 0xffffffff; - ch = (regs->regs[22]) >> 32; - cl = (regs->regs[22]) & 0xffffffff; - printk("R20 : %08Lx%08Lx R21 : %08Lx%08Lx R22 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[23]) >> 32; - al = (regs->regs[23]) & 0xffffffff; - bh = (regs->regs[24]) >> 32; - bl = (regs->regs[24]) & 0xffffffff; - ch = (regs->regs[25]) >> 32; - cl = (regs->regs[25]) & 0xffffffff; - printk("R23 : %08Lx%08Lx R24 : %08Lx%08Lx R25 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[26]) >> 32; - al = (regs->regs[26]) & 0xffffffff; - bh = (regs->regs[27]) >> 32; - bl = (regs->regs[27]) & 0xffffffff; - ch = (regs->regs[28]) >> 32; - cl = (regs->regs[28]) & 0xffffffff; - printk("R26 : %08Lx%08Lx R27 : %08Lx%08Lx R28 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[29]) >> 32; - al = (regs->regs[29]) & 0xffffffff; - bh = (regs->regs[30]) >> 32; - bl = (regs->regs[30]) & 0xffffffff; - ch = (regs->regs[31]) >> 32; - cl = (regs->regs[31]) & 0xffffffff; - printk("R29 : %08Lx%08Lx R30 : %08Lx%08Lx R31 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[32]) >> 32; - al = (regs->regs[32]) & 0xffffffff; - bh = (regs->regs[33]) >> 32; - bl = (regs->regs[33]) & 0xffffffff; - ch = (regs->regs[34]) >> 32; - cl = (regs->regs[34]) & 0xffffffff; - printk("R32 : %08Lx%08Lx R33 : %08Lx%08Lx R34 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[35]) >> 32; - al = (regs->regs[35]) & 0xffffffff; - bh = (regs->regs[36]) >> 32; - bl = (regs->regs[36]) & 0xffffffff; - ch = (regs->regs[37]) >> 32; - cl = (regs->regs[37]) & 0xffffffff; - printk("R35 : %08Lx%08Lx R36 : %08Lx%08Lx R37 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[38]) >> 32; - al = (regs->regs[38]) & 0xffffffff; - bh = (regs->regs[39]) >> 32; - bl = (regs->regs[39]) & 0xffffffff; - ch = (regs->regs[40]) >> 32; - cl = (regs->regs[40]) & 0xffffffff; - printk("R38 : %08Lx%08Lx R39 : %08Lx%08Lx R40 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[41]) >> 32; - al = (regs->regs[41]) & 0xffffffff; - bh = (regs->regs[42]) >> 32; - bl = (regs->regs[42]) & 0xffffffff; - ch = (regs->regs[43]) >> 32; - cl = (regs->regs[43]) & 0xffffffff; - printk("R41 : %08Lx%08Lx R42 : %08Lx%08Lx R43 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[44]) >> 32; - al = (regs->regs[44]) & 0xffffffff; - bh = (regs->regs[45]) >> 32; - bl = (regs->regs[45]) & 0xffffffff; - ch = (regs->regs[46]) >> 32; - cl = (regs->regs[46]) & 0xffffffff; - printk("R44 : %08Lx%08Lx R45 : %08Lx%08Lx R46 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[47]) >> 32; - al = (regs->regs[47]) & 0xffffffff; - bh = (regs->regs[48]) >> 32; - bl = (regs->regs[48]) & 0xffffffff; - ch = (regs->regs[49]) >> 32; - cl = (regs->regs[49]) & 0xffffffff; - printk("R47 : %08Lx%08Lx R48 : %08Lx%08Lx R49 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[50]) >> 32; - al = (regs->regs[50]) & 0xffffffff; - bh = (regs->regs[51]) >> 32; - bl = (regs->regs[51]) & 0xffffffff; - ch = (regs->regs[52]) >> 32; - cl = (regs->regs[52]) & 0xffffffff; - printk("R50 : %08Lx%08Lx R51 : %08Lx%08Lx R52 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[53]) >> 32; - al = (regs->regs[53]) & 0xffffffff; - bh = (regs->regs[54]) >> 32; - bl = (regs->regs[54]) & 0xffffffff; - ch = (regs->regs[55]) >> 32; - cl = (regs->regs[55]) & 0xffffffff; - printk("R53 : %08Lx%08Lx R54 : %08Lx%08Lx R55 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[56]) >> 32; - al = (regs->regs[56]) & 0xffffffff; - bh = (regs->regs[57]) >> 32; - bl = (regs->regs[57]) & 0xffffffff; - ch = (regs->regs[58]) >> 32; - cl = (regs->regs[58]) & 0xffffffff; - printk("R56 : %08Lx%08Lx R57 : %08Lx%08Lx R58 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[59]) >> 32; - al = (regs->regs[59]) & 0xffffffff; - bh = (regs->regs[60]) >> 32; - bl = (regs->regs[60]) & 0xffffffff; - ch = (regs->regs[61]) >> 32; - cl = (regs->regs[61]) & 0xffffffff; - printk("R59 : %08Lx%08Lx R60 : %08Lx%08Lx R61 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->regs[62]) >> 32; - al = (regs->regs[62]) & 0xffffffff; - bh = (regs->tregs[0]) >> 32; - bl = (regs->tregs[0]) & 0xffffffff; - ch = (regs->tregs[1]) >> 32; - cl = (regs->tregs[1]) & 0xffffffff; - printk("R62 : %08Lx%08Lx T0 : %08Lx%08Lx T1 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->tregs[2]) >> 32; - al = (regs->tregs[2]) & 0xffffffff; - bh = (regs->tregs[3]) >> 32; - bl = (regs->tregs[3]) & 0xffffffff; - ch = (regs->tregs[4]) >> 32; - cl = (regs->tregs[4]) & 0xffffffff; - printk("T2 : %08Lx%08Lx T3 : %08Lx%08Lx T4 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - ah = (regs->tregs[5]) >> 32; - al = (regs->tregs[5]) & 0xffffffff; - bh = (regs->tregs[6]) >> 32; - bl = (regs->tregs[6]) & 0xffffffff; - ch = (regs->tregs[7]) >> 32; - cl = (regs->tregs[7]) & 0xffffffff; - printk("T5 : %08Lx%08Lx T6 : %08Lx%08Lx T7 : %08Lx%08Lx\n", - ah, al, bh, bl, ch, cl); - - /* - * If we're in kernel mode, dump the stack too.. - */ - if (!user_mode(regs)) { - void show_stack(struct task_struct *tsk, unsigned long *sp); - unsigned long sp = regs->regs[15] & 0xffffffff; - struct task_struct *tsk = get_current(); - - tsk->thread.kregs = regs; - - show_stack(tsk, (unsigned long *)sp); - } -} - -/* - * Free current thread data structures etc.. - */ -void exit_thread(struct task_struct *tsk) -{ - /* - * See arch/sparc/kernel/process.c for the precedent for doing - * this -- RPC. - * - * The SH-5 FPU save/restore approach relies on - * last_task_used_math pointing to a live task_struct. When - * another task tries to use the FPU for the 1st time, the FPUDIS - * trap handling (see arch/sh/kernel/cpu/sh5/fpu.c) will save the - * existing FPU state to the FP regs field within - * last_task_used_math before re-loading the new task's FPU state - * (or initialising it if the FPU has been used before). So if - * last_task_used_math is stale, and its page has already been - * re-allocated for another use, the consequences are rather - * grim. Unless we null it here, there is no other path through - * which it would get safely nulled. - */ -#ifdef CONFIG_SH_FPU - if (last_task_used_math == tsk) - last_task_used_math = NULL; -#endif -} - -void flush_thread(void) -{ - - /* Called by fs/exec.c (setup_new_exec) to remove traces of a - * previously running executable. */ -#ifdef CONFIG_SH_FPU - if (last_task_used_math == current) { - last_task_used_math = NULL; - } - /* Force FPU state to be reinitialised after exec */ - clear_used_math(); -#endif - - /* if we are a kernel thread, about to change to user thread, - * update kreg - */ - if(current->thread.kregs==&fake_swapper_regs) { - current->thread.kregs = - ((struct pt_regs *)(THREAD_SIZE + (unsigned long) current) - 1); - current->thread.uregs = current->thread.kregs; - } -} - -void release_thread(struct task_struct *dead_task) -{ - /* do nothing */ -} - -/* Fill in the fpu structure for a core dump.. */ -int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu) -{ -#ifdef CONFIG_SH_FPU - int fpvalid; - struct task_struct *tsk = current; - - fpvalid = !!tsk_used_math(tsk); - if (fpvalid) { - if (current == last_task_used_math) { - enable_fpu(); - save_fpu(tsk); - disable_fpu(); - last_task_used_math = 0; - regs->sr |= SR_FD; - } - - memcpy(fpu, &tsk->thread.xstate->hardfpu, sizeof(*fpu)); - } - - return fpvalid; -#else - return 0; /* Task didn't use the fpu at all. */ -#endif -} -EXPORT_SYMBOL(dump_fpu); - -asmlinkage void ret_from_fork(void); -asmlinkage void ret_from_kernel_thread(void); - -int copy_thread(unsigned long clone_flags, unsigned long usp, - unsigned long arg, struct task_struct *p) -{ - struct pt_regs *childregs; - -#ifdef CONFIG_SH_FPU - /* can't happen for a kernel thread */ - if (last_task_used_math == current) { - enable_fpu(); - save_fpu(current); - disable_fpu(); - last_task_used_math = NULL; - current_pt_regs()->sr |= SR_FD; - } -#endif - /* Copy from sh version */ - childregs = (struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1; - p->thread.sp = (unsigned long) childregs; - - if (unlikely(p->flags & PF_KTHREAD)) { - memset(childregs, 0, sizeof(struct pt_regs)); - childregs->regs[2] = (unsigned long)arg; - childregs->regs[3] = (unsigned long)usp; - childregs->sr = (1 << 30); /* not user_mode */ - childregs->sr |= SR_FD; /* Invalidate FPU flag */ - p->thread.pc = (unsigned long) ret_from_kernel_thread; - return 0; - } - *childregs = *current_pt_regs(); - - /* - * Sign extend the edited stack. - * Note that thread.pc and thread.pc will stay - * 32-bit wide and context switch must take care - * of NEFF sign extension. - */ - if (usp) - childregs->regs[15] = neff_sign_extend(usp); - p->thread.uregs = childregs; - - childregs->regs[9] = 0; /* Set return value for child */ - childregs->sr |= SR_FD; /* Invalidate FPU flag */ - - p->thread.pc = (unsigned long) ret_from_fork; - - return 0; -} - -#ifdef CONFIG_FRAME_POINTER -static int in_sh64_switch_to(unsigned long pc) -{ - extern char __sh64_switch_to_end; - /* For a sleeping task, the PC is somewhere in the middle of the function, - so we don't have to worry about masking the LSB off */ - return (pc >= (unsigned long) sh64_switch_to) && - (pc < (unsigned long) &__sh64_switch_to_end); -} -#endif - -unsigned long get_wchan(struct task_struct *p) -{ - unsigned long pc; - - if (!p || p == current || p->state == TASK_RUNNING) - return 0; - - /* - * The same comment as on the Alpha applies here, too ... - */ - pc = thread_saved_pc(p); - -#ifdef CONFIG_FRAME_POINTER - if (in_sh64_switch_to(pc)) { - unsigned long schedule_fp; - unsigned long sh64_switch_to_fp; - unsigned long schedule_caller_pc; - - sh64_switch_to_fp = (long) p->thread.sp; - /* r14 is saved at offset 4 in the sh64_switch_to frame */ - schedule_fp = *(unsigned long *) (long)(sh64_switch_to_fp + 4); - - /* and the caller of 'schedule' is (currently!) saved at offset 24 - in the frame of schedule (from disasm) */ - schedule_caller_pc = *(unsigned long *) (long)(schedule_fp + 24); - return schedule_caller_pc; - } -#endif - return pc; -} diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c deleted file mode 100644 index 11085e48eaa6..000000000000 --- a/arch/sh/kernel/ptrace_64.c +++ /dev/null @@ -1,576 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/sh/kernel/ptrace_64.c - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 - 2008 Paul Mundt - * - * Started from SH3/4 version: - * SuperH version: Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka - * - * Original x86 implementation: - * By Ross Biro 1/23/92 - * edited by Linus Torvalds - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define CREATE_TRACE_POINTS -#include - -/* This mask defines the bits of the SR which the user is not allowed to - change, which are everything except S, Q, M, PR, SZ, FR. */ -#define SR_MASK (0xffff8cfd) - -/* - * does not yet catch signals sent when the child dies. - * in exit.c or in signal.c. - */ - -/* - * This routine will get a word from the user area in the process kernel stack. - */ -static inline int get_stack_long(struct task_struct *task, int offset) -{ - unsigned char *stack; - - stack = (unsigned char *)(task->thread.uregs); - stack += offset; - return (*((int *)stack)); -} - -static inline unsigned long -get_fpu_long(struct task_struct *task, unsigned long addr) -{ - unsigned long tmp; - struct pt_regs *regs; - regs = (struct pt_regs*)((unsigned char *)task + THREAD_SIZE) - 1; - - if (!tsk_used_math(task)) { - if (addr == offsetof(struct user_fpu_struct, fpscr)) { - tmp = FPSCR_INIT; - } else { - tmp = 0xffffffffUL; /* matches initial value in fpu.c */ - } - return tmp; - } - - if (last_task_used_math == task) { - enable_fpu(); - save_fpu(task); - disable_fpu(); - last_task_used_math = 0; - regs->sr |= SR_FD; - } - - tmp = ((long *)task->thread.xstate)[addr / sizeof(unsigned long)]; - return tmp; -} - -/* - * This routine will put a word into the user area in the process kernel stack. - */ -static inline int put_stack_long(struct task_struct *task, int offset, - unsigned long data) -{ - unsigned char *stack; - - stack = (unsigned char *)(task->thread.uregs); - stack += offset; - *(unsigned long *) stack = data; - return 0; -} - -static inline int -put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data) -{ - struct pt_regs *regs; - - regs = (struct pt_regs*)((unsigned char *)task + THREAD_SIZE) - 1; - - if (!tsk_used_math(task)) { - init_fpu(task); - } else if (last_task_used_math == task) { - enable_fpu(); - save_fpu(task); - disable_fpu(); - last_task_used_math = 0; - regs->sr |= SR_FD; - } - - ((long *)task->thread.xstate)[addr / sizeof(unsigned long)] = data; - return 0; -} - -void user_enable_single_step(struct task_struct *child) -{ - struct pt_regs *regs = child->thread.uregs; - - regs->sr |= SR_SSTEP; /* auto-resetting upon exception */ - - set_tsk_thread_flag(child, TIF_SINGLESTEP); -} - -void user_disable_single_step(struct task_struct *child) -{ - struct pt_regs *regs = child->thread.uregs; - - regs->sr &= ~SR_SSTEP; - - clear_tsk_thread_flag(child, TIF_SINGLESTEP); -} - -static int genregs_get(struct task_struct *target, - const struct user_regset *regset, - unsigned int pos, unsigned int count, - void *kbuf, void __user *ubuf) -{ - const struct pt_regs *regs = task_pt_regs(target); - int ret; - - /* PC, SR, SYSCALL */ - ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, - ®s->pc, - 0, 3 * sizeof(unsigned long long)); - - /* R1 -> R63 */ - if (!ret) - ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, - regs->regs, - offsetof(struct pt_regs, regs[0]), - 63 * sizeof(unsigned long long)); - /* TR0 -> TR7 */ - if (!ret) - ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, - regs->tregs, - offsetof(struct pt_regs, tregs[0]), - 8 * sizeof(unsigned long long)); - - if (!ret) - ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, - sizeof(struct pt_regs), -1); - - return ret; -} - -static int genregs_set(struct task_struct *target, - const struct user_regset *regset, - unsigned int pos, unsigned int count, - const void *kbuf, const void __user *ubuf) -{ - struct pt_regs *regs = task_pt_regs(target); - int ret; - - /* PC, SR, SYSCALL */ - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, - ®s->pc, - 0, 3 * sizeof(unsigned long long)); - - /* R1 -> R63 */ - if (!ret && count > 0) - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, - regs->regs, - offsetof(struct pt_regs, regs[0]), - 63 * sizeof(unsigned long long)); - - /* TR0 -> TR7 */ - if (!ret && count > 0) - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, - regs->tregs, - offsetof(struct pt_regs, tregs[0]), - 8 * sizeof(unsigned long long)); - - if (!ret) - ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, - sizeof(struct pt_regs), -1); - - return ret; -} - -#ifdef CONFIG_SH_FPU -int fpregs_get(struct task_struct *target, - const struct user_regset *regset, - unsigned int pos, unsigned int count, - void *kbuf, void __user *ubuf) -{ - int ret; - - ret = init_fpu(target); - if (ret) - return ret; - - return user_regset_copyout(&pos, &count, &kbuf, &ubuf, - &target->thread.xstate->hardfpu, 0, -1); -} - -static int fpregs_set(struct task_struct *target, - const struct user_regset *regset, - unsigned int pos, unsigned int count, - const void *kbuf, const void __user *ubuf) -{ - int ret; - - ret = init_fpu(target); - if (ret) - return ret; - - set_stopped_child_used_math(target); - - return user_regset_copyin(&pos, &count, &kbuf, &ubuf, - &target->thread.xstate->hardfpu, 0, -1); -} - -static int fpregs_active(struct task_struct *target, - const struct user_regset *regset) -{ - return tsk_used_math(target) ? regset->n : 0; -} -#endif - -const struct pt_regs_offset regoffset_table[] = { - REG_OFFSET_NAME(pc), - REG_OFFSET_NAME(sr), - REG_OFFSET_NAME(syscall_nr), - REGS_OFFSET_NAME(0), - REGS_OFFSET_NAME(1), - REGS_OFFSET_NAME(2), - REGS_OFFSET_NAME(3), - REGS_OFFSET_NAME(4), - REGS_OFFSET_NAME(5), - REGS_OFFSET_NAME(6), - REGS_OFFSET_NAME(7), - REGS_OFFSET_NAME(8), - REGS_OFFSET_NAME(9), - REGS_OFFSET_NAME(10), - REGS_OFFSET_NAME(11), - REGS_OFFSET_NAME(12), - REGS_OFFSET_NAME(13), - REGS_OFFSET_NAME(14), - REGS_OFFSET_NAME(15), - REGS_OFFSET_NAME(16), - REGS_OFFSET_NAME(17), - REGS_OFFSET_NAME(18), - REGS_OFFSET_NAME(19), - REGS_OFFSET_NAME(20), - REGS_OFFSET_NAME(21), - REGS_OFFSET_NAME(22), - REGS_OFFSET_NAME(23), - REGS_OFFSET_NAME(24), - REGS_OFFSET_NAME(25), - REGS_OFFSET_NAME(26), - REGS_OFFSET_NAME(27), - REGS_OFFSET_NAME(28), - REGS_OFFSET_NAME(29), - REGS_OFFSET_NAME(30), - REGS_OFFSET_NAME(31), - REGS_OFFSET_NAME(32), - REGS_OFFSET_NAME(33), - REGS_OFFSET_NAME(34), - REGS_OFFSET_NAME(35), - REGS_OFFSET_NAME(36), - REGS_OFFSET_NAME(37), - REGS_OFFSET_NAME(38), - REGS_OFFSET_NAME(39), - REGS_OFFSET_NAME(40), - REGS_OFFSET_NAME(41), - REGS_OFFSET_NAME(42), - REGS_OFFSET_NAME(43), - REGS_OFFSET_NAME(44), - REGS_OFFSET_NAME(45), - REGS_OFFSET_NAME(46), - REGS_OFFSET_NAME(47), - REGS_OFFSET_NAME(48), - REGS_OFFSET_NAME(49), - REGS_OFFSET_NAME(50), - REGS_OFFSET_NAME(51), - REGS_OFFSET_NAME(52), - REGS_OFFSET_NAME(53), - REGS_OFFSET_NAME(54), - REGS_OFFSET_NAME(55), - REGS_OFFSET_NAME(56), - REGS_OFFSET_NAME(57), - REGS_OFFSET_NAME(58), - REGS_OFFSET_NAME(59), - REGS_OFFSET_NAME(60), - REGS_OFFSET_NAME(61), - REGS_OFFSET_NAME(62), - REGS_OFFSET_NAME(63), - TREGS_OFFSET_NAME(0), - TREGS_OFFSET_NAME(1), - TREGS_OFFSET_NAME(2), - TREGS_OFFSET_NAME(3), - TREGS_OFFSET_NAME(4), - TREGS_OFFSET_NAME(5), - TREGS_OFFSET_NAME(6), - TREGS_OFFSET_NAME(7), - REG_OFFSET_END, -}; - -/* - * These are our native regset flavours. - */ -enum sh_regset { - REGSET_GENERAL, -#ifdef CONFIG_SH_FPU - REGSET_FPU, -#endif -}; - -static const struct user_regset sh_regsets[] = { - /* - * Format is: - * PC, SR, SYSCALL, - * R1 --> R63, - * TR0 --> TR7, - */ - [REGSET_GENERAL] = { - .core_note_type = NT_PRSTATUS, - .n = ELF_NGREG, - .size = sizeof(long long), - .align = sizeof(long long), - .get = genregs_get, - .set = genregs_set, - }, - -#ifdef CONFIG_SH_FPU - [REGSET_FPU] = { - .core_note_type = NT_PRFPREG, - .n = sizeof(struct user_fpu_struct) / - sizeof(long long), - .size = sizeof(long long), - .align = sizeof(long long), - .get = fpregs_get, - .set = fpregs_set, - .active = fpregs_active, - }, -#endif -}; - -static const struct user_regset_view user_sh64_native_view = { - .name = "sh64", - .e_machine = EM_SH, - .regsets = sh_regsets, - .n = ARRAY_SIZE(sh_regsets), -}; - -const struct user_regset_view *task_user_regset_view(struct task_struct *task) -{ - return &user_sh64_native_view; -} - -long arch_ptrace(struct task_struct *child, long request, - unsigned long addr, unsigned long data) -{ - int ret; - unsigned long __user *datap = (unsigned long __user *) data; - - switch (request) { - /* read the word at location addr in the USER area. */ - case PTRACE_PEEKUSR: { - unsigned long tmp; - - ret = -EIO; - if ((addr & 3) || addr < 0) - break; - - if (addr < sizeof(struct pt_regs)) - tmp = get_stack_long(child, addr); - else if ((addr >= offsetof(struct user, fpu)) && - (addr < offsetof(struct user, u_fpvalid))) { - unsigned long index; - ret = init_fpu(child); - if (ret) - break; - index = addr - offsetof(struct user, fpu); - tmp = get_fpu_long(child, index); - } else if (addr == offsetof(struct user, u_fpvalid)) { - tmp = !!tsk_used_math(child); - } else { - break; - } - ret = put_user(tmp, datap); - break; - } - - case PTRACE_POKEUSR: - /* write the word at location addr in the USER area. We must - disallow any changes to certain SR bits or u_fpvalid, since - this could crash the kernel or result in a security - loophole. */ - ret = -EIO; - if ((addr & 3) || addr < 0) - break; - - if (addr < sizeof(struct pt_regs)) { - /* Ignore change of top 32 bits of SR */ - if (addr == offsetof (struct pt_regs, sr)+4) - { - ret = 0; - break; - } - /* If lower 32 bits of SR, ignore non-user bits */ - if (addr == offsetof (struct pt_regs, sr)) - { - long cursr = get_stack_long(child, addr); - data &= ~(SR_MASK); - data |= (cursr & SR_MASK); - } - ret = put_stack_long(child, addr, data); - } - else if ((addr >= offsetof(struct user, fpu)) && - (addr < offsetof(struct user, u_fpvalid))) { - unsigned long index; - ret = init_fpu(child); - if (ret) - break; - index = addr - offsetof(struct user, fpu); - ret = put_fpu_long(child, index, data); - } - break; - - case PTRACE_GETREGS: - return copy_regset_to_user(child, &user_sh64_native_view, - REGSET_GENERAL, - 0, sizeof(struct pt_regs), - datap); - case PTRACE_SETREGS: - return copy_regset_from_user(child, &user_sh64_native_view, - REGSET_GENERAL, - 0, sizeof(struct pt_regs), - datap); -#ifdef CONFIG_SH_FPU - case PTRACE_GETFPREGS: - return copy_regset_to_user(child, &user_sh64_native_view, - REGSET_FPU, - 0, sizeof(struct user_fpu_struct), - datap); - case PTRACE_SETFPREGS: - return copy_regset_from_user(child, &user_sh64_native_view, - REGSET_FPU, - 0, sizeof(struct user_fpu_struct), - datap); -#endif - default: - ret = ptrace_request(child, request, addr, data); - break; - } - - return ret; -} - -asmlinkage int sh64_ptrace(long request, long pid, - unsigned long addr, unsigned long data) -{ -#define WPC_DBRMODE 0x0d104008 - static unsigned long first_call; - - if (!test_and_set_bit(0, &first_call)) { - /* Set WPC.DBRMODE to 0. This makes all debug events get - * delivered through RESVEC, i.e. into the handlers in entry.S. - * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE - * would normally be left set to 1, which makes debug events get - * delivered through DBRVEC, i.e. into the remote gdb's - * handlers. This prevents ptrace getting them, and confuses - * the remote gdb.) */ - printk("DBRMODE set to 0 to permit native debugging\n"); - poke_real_address_q(WPC_DBRMODE, 0); - } - - return sys_ptrace(request, pid, addr, data); -} - -asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs) -{ - long long ret = 0; - - secure_computing_strict(regs->regs[9]); - - if (test_thread_flag(TIF_SYSCALL_TRACE) && - tracehook_report_syscall_entry(regs)) - /* - * Tracing decided this syscall should not happen. - * We'll return a bogus call number to get an ENOSYS - * error, but leave the original number in regs->regs[0]. - */ - ret = -1LL; - - if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) - trace_sys_enter(regs, regs->regs[9]); - - audit_syscall_entry(regs->regs[1], regs->regs[2], regs->regs[3], - regs->regs[4], regs->regs[5]); - - return ret ?: regs->regs[9]; -} - -asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) -{ - int step; - - audit_syscall_exit(regs); - - if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) - trace_sys_exit(regs, regs->regs[9]); - - step = test_thread_flag(TIF_SINGLESTEP); - if (step || test_thread_flag(TIF_SYSCALL_TRACE)) - tracehook_report_syscall_exit(regs, step); -} - -/* Called with interrupts disabled */ -asmlinkage void do_single_step(unsigned long long vec, struct pt_regs *regs) -{ - /* This is called after a single step exception (DEBUGSS). - There is no need to change the PC, as it is a post-execution - exception, as entry.S does not do anything to the PC for DEBUGSS. - We need to clear the Single Step setting in SR to avoid - continually stepping. */ - local_irq_enable(); - regs->sr &= ~SR_SSTEP; - force_sig(SIGTRAP); -} - -/* Called with interrupts disabled */ -BUILD_TRAP_HANDLER(breakpoint) -{ - TRAP_HANDLER_DECL; - - /* We need to forward step the PC, to counteract the backstep done - in signal.c. */ - local_irq_enable(); - force_sig(SIGTRAP); - regs->pc += 4; -} - -/* - * Called by kernel/ptrace.c when detaching.. - * - * Make sure single step bits etc are not set. - */ -void ptrace_disable(struct task_struct *child) -{ - user_disable_single_step(child); -} diff --git a/arch/sh/kernel/reboot.c b/arch/sh/kernel/reboot.c index 11001a8a5fe0..5c33f036418b 100644 --- a/arch/sh/kernel/reboot.c +++ b/arch/sh/kernel/reboot.c @@ -4,9 +4,7 @@ #include #include #include -#ifdef CONFIG_SUPERH32 #include -#endif #include #include #include @@ -15,13 +13,11 @@ void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); -#ifdef CONFIG_SUPERH32 static void watchdog_trigger_immediate(void) { sh_wdt_write_cnt(0xFF); sh_wdt_write_csr(0xC2); } -#endif static void native_machine_restart(char * __unused) { @@ -33,10 +29,8 @@ static void native_machine_restart(char * __unused) /* Address error with SR.BL=1 first. */ trigger_address_error(); -#ifdef CONFIG_SUPERH32 /* If that fails or is unsupported, go for the watchdog next. */ watchdog_trigger_immediate(); -#endif /* * Give up and sleep. diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c deleted file mode 100644 index 9de17065afb4..000000000000 --- a/arch/sh/kernel/sh_ksyms_64.c +++ /dev/null @@ -1,51 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/sh/kernel/sh_ksyms_64.c - * - * Copyright (C) 2000, 2001 Paolo Alberelli - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -EXPORT_SYMBOL(__put_user_asm_b); -EXPORT_SYMBOL(__put_user_asm_w); -EXPORT_SYMBOL(__put_user_asm_l); -EXPORT_SYMBOL(__put_user_asm_q); -EXPORT_SYMBOL(__get_user_asm_b); -EXPORT_SYMBOL(__get_user_asm_w); -EXPORT_SYMBOL(__get_user_asm_l); -EXPORT_SYMBOL(__get_user_asm_q); -EXPORT_SYMBOL(__clear_user); -EXPORT_SYMBOL(copy_page); -EXPORT_SYMBOL(__copy_user); -EXPORT_SYMBOL(empty_zero_page); -EXPORT_SYMBOL(memcpy); -EXPORT_SYMBOL(memset); -EXPORT_SYMBOL(__udelay); -EXPORT_SYMBOL(__ndelay); -EXPORT_SYMBOL(__const_udelay); -EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strcpy); - -/* Ugh. These come in from libgcc.a at link time. */ -#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name) - -DECLARE_EXPORT(__sdivsi3); -DECLARE_EXPORT(__sdivsi3_1); -DECLARE_EXPORT(__sdivsi3_2); -DECLARE_EXPORT(__udivsi3); -DECLARE_EXPORT(__div_table); diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c deleted file mode 100644 index b9aaa9266b34..000000000000 --- a/arch/sh/kernel/signal_64.c +++ /dev/null @@ -1,567 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/sh/kernel/signal_64.c - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 - 2008 Paul Mundt - * Copyright (C) 2004 Richard Curnow - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define REG_RET 9 -#define REG_ARG1 2 -#define REG_ARG2 3 -#define REG_ARG3 4 -#define REG_SP 15 -#define REG_PR 18 -#define REF_REG_RET regs->regs[REG_RET] -#define REF_REG_SP regs->regs[REG_SP] -#define DEREF_REG_PR regs->regs[REG_PR] - -#define DEBUG_SIG 0 - -static void -handle_signal(struct ksignal *ksig, struct pt_regs *regs); - -static inline void -handle_syscall_restart(struct pt_regs *regs, struct sigaction *sa) -{ - /* If we're not from a syscall, bail out */ - if (regs->syscall_nr < 0) - return; - - /* check for system call restart.. */ - switch (regs->regs[REG_RET]) { - case -ERESTART_RESTARTBLOCK: - case -ERESTARTNOHAND: - no_system_call_restart: - regs->regs[REG_RET] = -EINTR; - break; - - case -ERESTARTSYS: - if (!(sa->sa_flags & SA_RESTART)) - goto no_system_call_restart; - /* fallthrough */ - case -ERESTARTNOINTR: - /* Decode syscall # */ - regs->regs[REG_RET] = regs->syscall_nr; - regs->pc -= 4; - break; - } -} - -/* - * Note that 'init' is a special process: it doesn't get signals it doesn't - * want to handle. Thus you cannot kill init even with a SIGKILL even by - * mistake. - * - * Note that we go through the signals twice: once to check the signals that - * the kernel can handle, and then we build all the user-level signal handling - * stack-frames in one go after that. - */ -static void do_signal(struct pt_regs *regs) -{ - struct ksignal ksig; - - /* - * We want the common case to go fast, which - * is why we may in certain cases get here from - * kernel mode. Just return without doing anything - * if so. - */ - if (!user_mode(regs)) - return; - - if (get_signal(&ksig)) { - handle_syscall_restart(regs, &ksig.ka.sa); - - /* Whee! Actually deliver the signal. */ - handle_signal(&ksig, regs); - return; - } - - /* Did we come from a system call? */ - if (regs->syscall_nr >= 0) { - /* Restart the system call - no handlers present */ - switch (regs->regs[REG_RET]) { - case -ERESTARTNOHAND: - case -ERESTARTSYS: - case -ERESTARTNOINTR: - /* Decode Syscall # */ - regs->regs[REG_RET] = regs->syscall_nr; - regs->pc -= 4; - break; - - case -ERESTART_RESTARTBLOCK: - regs->regs[REG_RET] = __NR_restart_syscall; - regs->pc -= 4; - break; - } - } - - /* No signal to deliver -- put the saved sigmask back */ - restore_saved_sigmask(); -} - -/* - * Do a signal return; undo the signal stack. - */ -struct sigframe { - struct sigcontext sc; - unsigned long extramask[_NSIG_WORDS-1]; - long long retcode[2]; -}; - -struct rt_sigframe { - struct siginfo __user *pinfo; - void *puc; - struct siginfo info; - struct ucontext uc; - long long retcode[2]; -}; - -#ifdef CONFIG_SH_FPU -static inline int -restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) -{ - int err = 0; - int fpvalid; - - err |= __get_user (fpvalid, &sc->sc_fpvalid); - conditional_used_math(fpvalid); - if (! fpvalid) - return err; - - if (current == last_task_used_math) { - last_task_used_math = NULL; - regs->sr |= SR_FD; - } - - err |= __copy_from_user(¤t->thread.xstate->hardfpu, &sc->sc_fpregs[0], - (sizeof(long long) * 32) + (sizeof(int) * 1)); - - return err; -} - -static inline int -setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) -{ - int err = 0; - int fpvalid; - - fpvalid = !!used_math(); - err |= __put_user(fpvalid, &sc->sc_fpvalid); - if (! fpvalid) - return err; - - if (current == last_task_used_math) { - enable_fpu(); - save_fpu(current); - disable_fpu(); - last_task_used_math = NULL; - regs->sr |= SR_FD; - } - - err |= __copy_to_user(&sc->sc_fpregs[0], ¤t->thread.xstate->hardfpu, - (sizeof(long long) * 32) + (sizeof(int) * 1)); - clear_used_math(); - - return err; -} -#else -static inline int -restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) -{ - return 0; -} -static inline int -setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) -{ - return 0; -} -#endif - -static int -restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, long long *r2_p) -{ - unsigned int err = 0; - unsigned long long current_sr, new_sr; -#define SR_MASK 0xffff8cfd - -#define COPY(x) err |= __get_user(regs->x, &sc->sc_##x) - - COPY(regs[0]); COPY(regs[1]); COPY(regs[2]); COPY(regs[3]); - COPY(regs[4]); COPY(regs[5]); COPY(regs[6]); COPY(regs[7]); - COPY(regs[8]); COPY(regs[9]); COPY(regs[10]); COPY(regs[11]); - COPY(regs[12]); COPY(regs[13]); COPY(regs[14]); COPY(regs[15]); - COPY(regs[16]); COPY(regs[17]); COPY(regs[18]); COPY(regs[19]); - COPY(regs[20]); COPY(regs[21]); COPY(regs[22]); COPY(regs[23]); - COPY(regs[24]); COPY(regs[25]); COPY(regs[26]); COPY(regs[27]); - COPY(regs[28]); COPY(regs[29]); COPY(regs[30]); COPY(regs[31]); - COPY(regs[32]); COPY(regs[33]); COPY(regs[34]); COPY(regs[35]); - COPY(regs[36]); COPY(regs[37]); COPY(regs[38]); COPY(regs[39]); - COPY(regs[40]); COPY(regs[41]); COPY(regs[42]); COPY(regs[43]); - COPY(regs[44]); COPY(regs[45]); COPY(regs[46]); COPY(regs[47]); - COPY(regs[48]); COPY(regs[49]); COPY(regs[50]); COPY(regs[51]); - COPY(regs[52]); COPY(regs[53]); COPY(regs[54]); COPY(regs[55]); - COPY(regs[56]); COPY(regs[57]); COPY(regs[58]); COPY(regs[59]); - COPY(regs[60]); COPY(regs[61]); COPY(regs[62]); - COPY(tregs[0]); COPY(tregs[1]); COPY(tregs[2]); COPY(tregs[3]); - COPY(tregs[4]); COPY(tregs[5]); COPY(tregs[6]); COPY(tregs[7]); - - /* Prevent the signal handler manipulating SR in a way that can - crash the kernel. i.e. only allow S, Q, M, PR, SZ, FR to be - modified */ - current_sr = regs->sr; - err |= __get_user(new_sr, &sc->sc_sr); - regs->sr &= SR_MASK; - regs->sr |= (new_sr & ~SR_MASK); - - COPY(pc); - -#undef COPY - - /* Must do this last in case it sets regs->sr.fd (i.e. after rest of sr - * has been restored above.) */ - err |= restore_sigcontext_fpu(regs, sc); - - regs->syscall_nr = -1; /* disable syscall checks */ - err |= __get_user(*r2_p, &sc->sc_regs[REG_RET]); - return err; -} - -asmlinkage int sys_sigreturn(unsigned long r2, unsigned long r3, - unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs * regs) -{ - struct sigframe __user *frame = (struct sigframe __user *) (long) REF_REG_SP; - sigset_t set; - long long ret; - - /* Always make any pending restarted system calls return -EINTR */ - current->restart_block.fn = do_no_restart_syscall; - - if (!access_ok(frame, sizeof(*frame))) - goto badframe; - - if (__get_user(set.sig[0], &frame->sc.oldmask) - || (_NSIG_WORDS > 1 - && __copy_from_user(&set.sig[1], &frame->extramask, - sizeof(frame->extramask)))) - goto badframe; - - set_current_blocked(&set); - - if (restore_sigcontext(regs, &frame->sc, &ret)) - goto badframe; - regs->pc -= 4; - - return (int) ret; - -badframe: - force_sig(SIGSEGV); - return 0; -} - -asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3, - unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs * regs) -{ - struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (long) REF_REG_SP; - sigset_t set; - long long ret; - - /* Always make any pending restarted system calls return -EINTR */ - current->restart_block.fn = do_no_restart_syscall; - - if (!access_ok(frame, sizeof(*frame))) - goto badframe; - - if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) - goto badframe; - - set_current_blocked(&set); - - if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ret)) - goto badframe; - regs->pc -= 4; - - if (restore_altstack(&frame->uc.uc_stack)) - goto badframe; - - return (int) ret; - -badframe: - force_sig(SIGSEGV); - return 0; -} - -/* - * Set up a signal frame. - */ -static int -setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, - unsigned long mask) -{ - int err = 0; - - /* Do this first, otherwise is this sets sr->fd, that value isn't preserved. */ - err |= setup_sigcontext_fpu(regs, sc); - -#define COPY(x) err |= __put_user(regs->x, &sc->sc_##x) - - COPY(regs[0]); COPY(regs[1]); COPY(regs[2]); COPY(regs[3]); - COPY(regs[4]); COPY(regs[5]); COPY(regs[6]); COPY(regs[7]); - COPY(regs[8]); COPY(regs[9]); COPY(regs[10]); COPY(regs[11]); - COPY(regs[12]); COPY(regs[13]); COPY(regs[14]); COPY(regs[15]); - COPY(regs[16]); COPY(regs[17]); COPY(regs[18]); COPY(regs[19]); - COPY(regs[20]); COPY(regs[21]); COPY(regs[22]); COPY(regs[23]); - COPY(regs[24]); COPY(regs[25]); COPY(regs[26]); COPY(regs[27]); - COPY(regs[28]); COPY(regs[29]); COPY(regs[30]); COPY(regs[31]); - COPY(regs[32]); COPY(regs[33]); COPY(regs[34]); COPY(regs[35]); - COPY(regs[36]); COPY(regs[37]); COPY(regs[38]); COPY(regs[39]); - COPY(regs[40]); COPY(regs[41]); COPY(regs[42]); COPY(regs[43]); - COPY(regs[44]); COPY(regs[45]); COPY(regs[46]); COPY(regs[47]); - COPY(regs[48]); COPY(regs[49]); COPY(regs[50]); COPY(regs[51]); - COPY(regs[52]); COPY(regs[53]); COPY(regs[54]); COPY(regs[55]); - COPY(regs[56]); COPY(regs[57]); COPY(regs[58]); COPY(regs[59]); - COPY(regs[60]); COPY(regs[61]); COPY(regs[62]); - COPY(tregs[0]); COPY(tregs[1]); COPY(tregs[2]); COPY(tregs[3]); - COPY(tregs[4]); COPY(tregs[5]); COPY(tregs[6]); COPY(tregs[7]); - COPY(sr); COPY(pc); - -#undef COPY - - err |= __put_user(mask, &sc->oldmask); - - return err; -} - -/* - * Determine which stack to use.. - */ -static inline void __user * -get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) -{ - if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp)) - sp = current->sas_ss_sp + current->sas_ss_size; - - return (void __user *)((sp - frame_size) & -8ul); -} - -void sa_default_restorer(void); /* See comments below */ -void sa_default_rt_restorer(void); /* See comments below */ - -static int setup_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs) -{ - struct sigframe __user *frame; - int err = 0, sig = ksig->sig; - int signal; - - frame = get_sigframe(&ksig->ka, regs->regs[REG_SP], sizeof(*frame)); - - if (!access_ok(frame, sizeof(*frame))) - return -EFAULT; - - err |= setup_sigcontext(&frame->sc, regs, set->sig[0]); - - /* Give up earlier as i386, in case */ - if (err) - return -EFAULT; - - if (_NSIG_WORDS > 1) { - err |= __copy_to_user(frame->extramask, &set->sig[1], - sizeof(frame->extramask)); } - - /* Give up earlier as i386, in case */ - if (err) - return -EFAULT; - - /* Set up to return from userspace. If provided, use a stub - already in userspace. */ - if (ksig->ka.sa.sa_flags & SA_RESTORER) { - /* - * On SH5 all edited pointers are subject to NEFF - */ - DEREF_REG_PR = neff_sign_extend((unsigned long) - ksig->ka->sa.sa_restorer | 0x1); - } else { - /* - * Different approach on SH5. - * . Endianness independent asm code gets placed in entry.S . - * This is limited to four ASM instructions corresponding - * to two long longs in size. - * . err checking is done on the else branch only - * . flush_icache_range() is called upon __put_user() only - * . all edited pointers are subject to NEFF - * . being code, linker turns ShMedia bit on, always - * dereference index -1. - */ - DEREF_REG_PR = neff_sign_extend((unsigned long) - frame->retcode | 0x01); - - if (__copy_to_user(frame->retcode, - (void *)((unsigned long)sa_default_restorer & (~1)), 16) != 0) - return -EFAULT; - - /* Cohere the trampoline with the I-cache. */ - flush_cache_sigtramp(DEREF_REG_PR-1); - } - - /* - * Set up registers for signal handler. - * All edited pointers are subject to NEFF. - */ - regs->regs[REG_SP] = neff_sign_extend((unsigned long)frame); - regs->regs[REG_ARG1] = sig; /* Arg for signal handler */ - - /* FIXME: - The glibc profiling support for SH-5 needs to be passed a sigcontext - so it can retrieve the PC. At some point during 2003 the glibc - support was changed to receive the sigcontext through the 2nd - argument, but there are still versions of libc.so in use that use - the 3rd argument. Until libc.so is stabilised, pass the sigcontext - through both 2nd and 3rd arguments. - */ - - regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->sc; - regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->sc; - - regs->pc = neff_sign_extend((unsigned long)ksig->ka.sa.sa_handler); - - /* Broken %016Lx */ - pr_debug("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n", - sig, current->comm, current->pid, frame, - regs->pc >> 32, regs->pc & 0xffffffff, - DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff); - - return 0; -} - -static int setup_rt_frame(struct ksignal *kig, sigset_t *set, - struct pt_regs *regs) -{ - struct rt_sigframe __user *frame; - int err = 0, sig = ksig->sig; - - frame = get_sigframe(&ksig->ka, regs->regs[REG_SP], sizeof(*frame)); - - if (!access_ok(frame, sizeof(*frame))) - return -EFAULT; - - err |= __put_user(&frame->info, &frame->pinfo); - err |= __put_user(&frame->uc, &frame->puc); - err |= copy_siginfo_to_user(&frame->info, &ksig->info); - - /* Give up earlier as i386, in case */ - if (err) - return -EFAULT; - - /* Create the ucontext. */ - err |= __put_user(0, &frame->uc.uc_flags); - err |= __put_user(0, &frame->uc.uc_link); - err |= __save_altstack(&frame->uc.uc_stack, regs->regs[REG_SP]); - err |= setup_sigcontext(&frame->uc.uc_mcontext, - regs, set->sig[0]); - err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); - - /* Give up earlier as i386, in case */ - if (err) - return -EFAULT; - - /* Set up to return from userspace. If provided, use a stub - already in userspace. */ - if (ksig->ka.sa.sa_flags & SA_RESTORER) { - /* - * On SH5 all edited pointers are subject to NEFF - */ - DEREF_REG_PR = neff_sign_extend((unsigned long) - ksig->ka.sa.sa_restorer | 0x1); - } else { - /* - * Different approach on SH5. - * . Endianness independent asm code gets placed in entry.S . - * This is limited to four ASM instructions corresponding - * to two long longs in size. - * . err checking is done on the else branch only - * . flush_icache_range() is called upon __put_user() only - * . all edited pointers are subject to NEFF - * . being code, linker turns ShMedia bit on, always - * dereference index -1. - */ - DEREF_REG_PR = neff_sign_extend((unsigned long) - frame->retcode | 0x01); - - if (__copy_to_user(frame->retcode, - (void *)((unsigned long)sa_default_rt_restorer & (~1)), 16) != 0) - return -EFAULT; - - /* Cohere the trampoline with the I-cache. */ - flush_icache_range(DEREF_REG_PR-1, DEREF_REG_PR-1+15); - } - - /* - * Set up registers for signal handler. - * All edited pointers are subject to NEFF. - */ - regs->regs[REG_SP] = neff_sign_extend((unsigned long)frame); - regs->regs[REG_ARG1] = sig; /* Arg for signal handler */ - regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->info; - regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->uc.uc_mcontext; - regs->pc = neff_sign_extend((unsigned long)ksig->ka.sa.sa_handler); - - pr_debug("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n", - sig, current->comm, current->pid, frame, - regs->pc >> 32, regs->pc & 0xffffffff, - DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff); - - return 0; -} - -/* - * OK, we're invoking a handler - */ -static void -handle_signal(struct ksignal *ksig, struct pt_regs *regs) -{ - sigset_t *oldset = sigmask_to_save(); - int ret; - - /* Set up the stack frame */ - if (ksig->ka.sa.sa_flags & SA_SIGINFO) - ret = setup_rt_frame(ksig, oldset, regs); - else - ret = setup_frame(ksig, oldset, regs); - - signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP)); -} - -asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) -{ - if (thread_info_flags & _TIF_SIGPENDING) - do_signal(regs); - - if (thread_info_flags & _TIF_NOTIFY_RESUME) { - clear_thread_flag(TIF_NOTIFY_RESUME); - tracehook_notify_resume(regs); - } -} diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S deleted file mode 100644 index 1bcb86f0b728..000000000000 --- a/arch/sh/kernel/syscalls_64.S +++ /dev/null @@ -1,419 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * - * arch/sh/kernel/syscalls_64.S - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2004 - 2007 Paul Mundt - * Copyright (C) 2003, 2004 Richard Curnow - */ - -#include - - .section .data, "aw" - .balign 32 - -/* - * System calls jump table - */ - .globl sys_call_table -sys_call_table: - .long sys_restart_syscall /* 0 - old "setup()" system call */ - .long sys_exit - .long sys_fork - .long sys_read - .long sys_write - .long sys_open /* 5 */ - .long sys_close - .long sys_waitpid - .long sys_creat - .long sys_link - .long sys_unlink /* 10 */ - .long sys_execve - .long sys_chdir - .long sys_time - .long sys_mknod - .long sys_chmod /* 15 */ - .long sys_lchown16 - .long sys_ni_syscall /* old break syscall holder */ - .long sys_stat - .long sys_lseek - .long sys_getpid /* 20 */ - .long sys_mount - .long sys_oldumount - .long sys_setuid16 - .long sys_getuid16 - .long sys_stime /* 25 */ - .long sh64_ptrace - .long sys_alarm - .long sys_fstat - .long sys_pause - .long sys_utime /* 30 */ - .long sys_ni_syscall /* old stty syscall holder */ - .long sys_ni_syscall /* old gtty syscall holder */ - .long sys_access - .long sys_nice - .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ - .long sys_sync - .long sys_kill - .long sys_rename - .long sys_mkdir - .long sys_rmdir /* 40 */ - .long sys_dup - .long sys_pipe - .long sys_times - .long sys_ni_syscall /* old prof syscall holder */ - .long sys_brk /* 45 */ - .long sys_setgid16 - .long sys_getgid16 - .long sys_signal - .long sys_geteuid16 - .long sys_getegid16 /* 50 */ - .long sys_acct - .long sys_umount /* recycled never used phys( */ - .long sys_ni_syscall /* old lock syscall holder */ - .long sys_ioctl - .long sys_fcntl /* 55 */ - .long sys_ni_syscall /* old mpx syscall holder */ - .long sys_setpgid - .long sys_ni_syscall /* old ulimit syscall holder */ - .long sys_ni_syscall /* sys_olduname */ - .long sys_umask /* 60 */ - .long sys_chroot - .long sys_ustat - .long sys_dup2 - .long sys_getppid - .long sys_getpgrp /* 65 */ - .long sys_setsid - .long sys_sigaction - .long sys_sgetmask - .long sys_ssetmask - .long sys_setreuid16 /* 70 */ - .long sys_setregid16 - .long sys_sigsuspend - .long sys_sigpending - .long sys_sethostname - .long sys_setrlimit /* 75 */ - .long sys_old_getrlimit - .long sys_getrusage - .long sys_gettimeofday - .long sys_settimeofday - .long sys_getgroups16 /* 80 */ - .long sys_setgroups16 - .long sys_ni_syscall /* sys_oldselect */ - .long sys_symlink - .long sys_lstat - .long sys_readlink /* 85 */ - .long sys_uselib - .long sys_swapon - .long sys_reboot - .long sys_old_readdir - .long old_mmap /* 90 */ - .long sys_munmap - .long sys_truncate - .long sys_ftruncate - .long sys_fchmod - .long sys_fchown16 /* 95 */ - .long sys_getpriority - .long sys_setpriority - .long sys_ni_syscall /* old profil syscall holder */ - .long sys_statfs - .long sys_fstatfs /* 100 */ - .long sys_ni_syscall /* ioperm */ - .long sys_socketcall /* Obsolete implementation of socket syscall */ - .long sys_syslog - .long sys_setitimer - .long sys_getitimer /* 105 */ - .long sys_newstat - .long sys_newlstat - .long sys_newfstat - .long sys_uname - .long sys_ni_syscall /* 110 */ /* iopl */ - .long sys_vhangup - .long sys_ni_syscall /* idle */ - .long sys_ni_syscall /* vm86old */ - .long sys_wait4 - .long sys_swapoff /* 115 */ - .long sys_sysinfo - .long sys_ipc /* Obsolete ipc syscall implementation */ - .long sys_fsync - .long sys_sigreturn - .long sys_clone /* 120 */ - .long sys_setdomainname - .long sys_newuname - .long sys_cacheflush /* x86: sys_modify_ldt */ - .long sys_adjtimex - .long sys_mprotect /* 125 */ - .long sys_sigprocmask - .long sys_ni_syscall /* old "create_module" */ - .long sys_init_module - .long sys_delete_module - .long sys_ni_syscall /* 130: old "get_kernel_syms" */ - .long sys_quotactl - .long sys_getpgid - .long sys_fchdir - .long sys_bdflush - .long sys_sysfs /* 135 */ - .long sys_personality - .long sys_ni_syscall /* for afs_syscall */ - .long sys_setfsuid16 - .long sys_setfsgid16 - .long sys_llseek /* 140 */ - .long sys_getdents - .long sys_select - .long sys_flock - .long sys_msync - .long sys_readv /* 145 */ - .long sys_writev - .long sys_getsid - .long sys_fdatasync - .long sys_sysctl - .long sys_mlock /* 150 */ - .long sys_munlock - .long sys_mlockall - .long sys_munlockall - .long sys_sched_setparam - .long sys_sched_getparam /* 155 */ - .long sys_sched_setscheduler - .long sys_sched_getscheduler - .long sys_sched_yield - .long sys_sched_get_priority_max - .long sys_sched_get_priority_min /* 160 */ - .long sys_sched_rr_get_interval - .long sys_nanosleep - .long sys_mremap - .long sys_setresuid16 - .long sys_getresuid16 /* 165 */ - .long sys_ni_syscall /* vm86 */ - .long sys_ni_syscall /* old "query_module" */ - .long sys_poll - .long sys_ni_syscall /* was nfsservctl */ - .long sys_setresgid16 /* 170 */ - .long sys_getresgid16 - .long sys_prctl - .long sys_rt_sigreturn - .long sys_rt_sigaction - .long sys_rt_sigprocmask /* 175 */ - .long sys_rt_sigpending - .long sys_rt_sigtimedwait - .long sys_rt_sigqueueinfo - .long sys_rt_sigsuspend - .long sys_pread64 /* 180 */ - .long sys_pwrite64 - .long sys_chown16 - .long sys_getcwd - .long sys_capget - .long sys_capset /* 185 */ - .long sys_sigaltstack - .long sys_sendfile - .long sys_ni_syscall /* getpmsg */ - .long sys_ni_syscall /* putpmsg */ - .long sys_vfork /* 190 */ - .long sys_getrlimit - .long sys_mmap2 - .long sys_truncate64 - .long sys_ftruncate64 - .long sys_stat64 /* 195 */ - .long sys_lstat64 - .long sys_fstat64 - .long sys_lchown - .long sys_getuid - .long sys_getgid /* 200 */ - .long sys_geteuid - .long sys_getegid - .long sys_setreuid - .long sys_setregid - .long sys_getgroups /* 205 */ - .long sys_setgroups - .long sys_fchown - .long sys_setresuid - .long sys_getresuid - .long sys_setresgid /* 210 */ - .long sys_getresgid - .long sys_chown - .long sys_setuid - .long sys_setgid - .long sys_setfsuid /* 215 */ - .long sys_setfsgid - .long sys_pivot_root - .long sys_mincore - .long sys_madvise - /* Broken-out socket family (maintain backwards compatibility in syscall - numbering with 2.4) */ - .long sys_socket /* 220 */ - .long sys_bind - .long sys_connect - .long sys_listen - .long sys_accept - .long sys_getsockname /* 225 */ - .long sys_getpeername - .long sys_socketpair - .long sys_send - .long sys_sendto - .long sys_recv /* 230*/ - .long sys_recvfrom - .long sys_shutdown - .long sys_setsockopt - .long sys_getsockopt - .long sys_sendmsg /* 235 */ - .long sys_recvmsg - /* Broken-out IPC family (maintain backwards compatibility in syscall - numbering with 2.4) */ - .long sys_semop - .long sys_semget - .long sys_semctl - .long sys_msgsnd /* 240 */ - .long sys_msgrcv - .long sys_msgget - .long sys_msgctl - .long sys_shmat - .long sys_shmdt /* 245 */ - .long sys_shmget - .long sys_shmctl - /* Rest of syscalls listed in 2.4 i386 unistd.h */ - .long sys_getdents64 - .long sys_fcntl64 - .long sys_ni_syscall /* 250 reserved for TUX */ - .long sys_ni_syscall /* Reserved for Security */ - .long sys_gettid - .long sys_readahead - .long sys_setxattr - .long sys_lsetxattr /* 255 */ - .long sys_fsetxattr - .long sys_getxattr - .long sys_lgetxattr - .long sys_fgetxattr - .long sys_listxattr /* 260 */ - .long sys_llistxattr - .long sys_flistxattr - .long sys_removexattr - .long sys_lremovexattr - .long sys_fremovexattr /* 265 */ - .long sys_tkill - .long sys_sendfile64 - .long sys_futex - .long sys_sched_setaffinity - .long sys_sched_getaffinity /* 270 */ - .long sys_ni_syscall /* reserved for set_thread_area */ - .long sys_ni_syscall /* reserved for get_thread_area */ - .long sys_io_setup - .long sys_io_destroy - .long sys_io_getevents /* 275 */ - .long sys_io_submit - .long sys_io_cancel - .long sys_fadvise64 - .long sys_ni_syscall - .long sys_exit_group /* 280 */ - /* Rest of new 2.6 syscalls */ - .long sys_lookup_dcookie - .long sys_epoll_create - .long sys_epoll_ctl - .long sys_epoll_wait - .long sys_remap_file_pages /* 285 */ - .long sys_set_tid_address - .long sys_timer_create - .long sys_timer_settime - .long sys_timer_gettime - .long sys_timer_getoverrun /* 290 */ - .long sys_timer_delete - .long sys_clock_settime - .long sys_clock_gettime - .long sys_clock_getres - .long sys_clock_nanosleep /* 295 */ - .long sys_statfs64 - .long sys_fstatfs64 - .long sys_tgkill - .long sys_utimes - .long sys_fadvise64_64 /* 300 */ - .long sys_ni_syscall /* Reserved for vserver */ - .long sys_ni_syscall /* Reserved for mbind */ - .long sys_ni_syscall /* get_mempolicy */ - .long sys_ni_syscall /* set_mempolicy */ - .long sys_mq_open /* 305 */ - .long sys_mq_unlink - .long sys_mq_timedsend - .long sys_mq_timedreceive - .long sys_mq_notify - .long sys_mq_getsetattr /* 310 */ - .long sys_ni_syscall /* Reserved for kexec */ - .long sys_waitid - .long sys_add_key - .long sys_request_key - .long sys_keyctl /* 315 */ - .long sys_ioprio_set - .long sys_ioprio_get - .long sys_inotify_init - .long sys_inotify_add_watch - .long sys_inotify_rm_watch /* 320 */ - .long sys_ni_syscall - .long sys_migrate_pages - .long sys_openat - .long sys_mkdirat - .long sys_mknodat /* 325 */ - .long sys_fchownat - .long sys_futimesat - .long sys_fstatat64 - .long sys_unlinkat - .long sys_renameat /* 330 */ - .long sys_linkat - .long sys_symlinkat - .long sys_readlinkat - .long sys_fchmodat - .long sys_faccessat /* 335 */ - .long sys_pselect6 - .long sys_ppoll - .long sys_unshare - .long sys_set_robust_list - .long sys_get_robust_list /* 340 */ - .long sys_splice - .long sys_sync_file_range - .long sys_tee - .long sys_vmsplice - .long sys_move_pages /* 345 */ - .long sys_getcpu - .long sys_epoll_pwait - .long sys_utimensat - .long sys_signalfd - .long sys_timerfd_create /* 350 */ - .long sys_eventfd - .long sys_fallocate - .long sys_timerfd_settime - .long sys_timerfd_gettime - .long sys_signalfd4 /* 355 */ - .long sys_eventfd2 - .long sys_epoll_create1 - .long sys_dup3 - .long sys_pipe2 - .long sys_inotify_init1 /* 360 */ - .long sys_preadv - .long sys_pwritev - .long sys_rt_tgsigqueueinfo - .long sys_perf_event_open - .long sys_recvmmsg /* 365 */ - .long sys_accept4 - .long sys_fanotify_init - .long sys_fanotify_mark - .long sys_prlimit64 - .long sys_name_to_handle_at /* 370 */ - .long sys_open_by_handle_at - .long sys_clock_adjtime - .long sys_syncfs - .long sys_sendmmsg - .long sys_setns /* 375 */ - .long sys_process_vm_readv - .long sys_process_vm_writev - .long sys_kcmp - .long sys_finit_module - .long sys_sched_getattr /* 380 */ - .long sys_sched_setattr - .long sys_renameat2 - .long sys_seccomp - .long sys_getrandom - .long sys_memfd_create /* 385 */ - .long sys_bpf - .long sys_execveat - .long sys_userfaultfd - .long sys_membarrier - .long sys_mlock2 /* 390 */ - .long sys_copy_file_range - .long sys_preadv2 - .long sys_pwritev2 diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c deleted file mode 100644 index 37046f3a26d3..000000000000 --- a/arch/sh/kernel/traps_64.c +++ /dev/null @@ -1,814 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/sh/kernel/traps_64.c - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - * Copyright (C) 2003, 2004 Richard Curnow - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static int read_opcode(reg_size_t pc, insn_size_t *result_opcode, int from_user_mode) -{ - int get_user_error; - unsigned long aligned_pc; - insn_size_t opcode; - - if ((pc & 3) == 1) { - /* SHmedia */ - aligned_pc = pc & ~3; - if (from_user_mode) { - if (!access_ok(aligned_pc, sizeof(insn_size_t))) { - get_user_error = -EFAULT; - } else { - get_user_error = __get_user(opcode, (insn_size_t *)aligned_pc); - *result_opcode = opcode; - } - return get_user_error; - } else { - /* If the fault was in the kernel, we can either read - * this directly, or if not, we fault. - */ - *result_opcode = *(insn_size_t *)aligned_pc; - return 0; - } - } else if ((pc & 1) == 0) { - /* SHcompact */ - /* TODO : provide handling for this. We don't really support - user-mode SHcompact yet, and for a kernel fault, this would - have to come from a module built for SHcompact. */ - return -EFAULT; - } else { - /* misaligned */ - return -EFAULT; - } -} - -static int address_is_sign_extended(__u64 a) -{ - __u64 b; -#if (NEFF == 32) - b = (__u64)(__s64)(__s32)(a & 0xffffffffUL); - return (b == a) ? 1 : 0; -#else -#error "Sign extend check only works for NEFF==32" -#endif -} - -/* return -1 for fault, 0 for OK */ -static int generate_and_check_address(struct pt_regs *regs, - insn_size_t opcode, - int displacement_not_indexed, - int width_shift, - __u64 *address) -{ - __u64 base_address, addr; - int basereg; - - switch (1 << width_shift) { - case 1: inc_unaligned_byte_access(); break; - case 2: inc_unaligned_word_access(); break; - case 4: inc_unaligned_dword_access(); break; - case 8: inc_unaligned_multi_access(); break; - } - - basereg = (opcode >> 20) & 0x3f; - base_address = regs->regs[basereg]; - if (displacement_not_indexed) { - __s64 displacement; - displacement = (opcode >> 10) & 0x3ff; - displacement = sign_extend64(displacement, 9); - addr = (__u64)((__s64)base_address + (displacement << width_shift)); - } else { - __u64 offset; - int offsetreg; - offsetreg = (opcode >> 10) & 0x3f; - offset = regs->regs[offsetreg]; - addr = base_address + offset; - } - - /* Check sign extended */ - if (!address_is_sign_extended(addr)) - return -1; - - /* Check accessible. For misaligned access in the kernel, assume the - address is always accessible (and if not, just fault when the - load/store gets done.) */ - if (user_mode(regs)) { - inc_unaligned_user_access(); - - if (addr >= TASK_SIZE) - return -1; - } else - inc_unaligned_kernel_access(); - - *address = addr; - - perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, addr); - unaligned_fixups_notify(current, opcode, regs); - - return 0; -} - -static void misaligned_kernel_word_load(__u64 address, int do_sign_extend, __u64 *result) -{ - unsigned short x; - unsigned char *p, *q; - p = (unsigned char *) (int) address; - q = (unsigned char *) &x; - q[0] = p[0]; - q[1] = p[1]; - - if (do_sign_extend) { - *result = (__u64)(__s64) *(short *) &x; - } else { - *result = (__u64) x; - } -} - -static void misaligned_kernel_word_store(__u64 address, __u64 value) -{ - unsigned short x; - unsigned char *p, *q; - p = (unsigned char *) (int) address; - q = (unsigned char *) &x; - - x = (__u16) value; - p[0] = q[0]; - p[1] = q[1]; -} - -static int misaligned_load(struct pt_regs *regs, - insn_size_t opcode, - int displacement_not_indexed, - int width_shift, - int do_sign_extend) -{ - /* Return -1 for a fault, 0 for OK */ - int error; - int destreg; - __u64 address; - - error = generate_and_check_address(regs, opcode, - displacement_not_indexed, width_shift, &address); - if (error < 0) - return error; - - destreg = (opcode >> 4) & 0x3f; - if (user_mode(regs)) { - __u64 buffer; - - if (!access_ok((unsigned long) address, 1UL< 0) { - return -1; /* fault */ - } - switch (width_shift) { - case 1: - if (do_sign_extend) { - regs->regs[destreg] = (__u64)(__s64) *(__s16 *) &buffer; - } else { - regs->regs[destreg] = (__u64) *(__u16 *) &buffer; - } - break; - case 2: - regs->regs[destreg] = (__u64)(__s64) *(__s32 *) &buffer; - break; - case 3: - regs->regs[destreg] = buffer; - break; - default: - printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n", - width_shift, (unsigned long) regs->pc); - break; - } - } else { - /* kernel mode - we can take short cuts since if we fault, it's a genuine bug */ - __u64 lo, hi; - - switch (width_shift) { - case 1: - misaligned_kernel_word_load(address, do_sign_extend, ®s->regs[destreg]); - break; - case 2: - asm ("ldlo.l %1, 0, %0" : "=r" (lo) : "r" (address)); - asm ("ldhi.l %1, 3, %0" : "=r" (hi) : "r" (address)); - regs->regs[destreg] = lo | hi; - break; - case 3: - asm ("ldlo.q %1, 0, %0" : "=r" (lo) : "r" (address)); - asm ("ldhi.q %1, 7, %0" : "=r" (hi) : "r" (address)); - regs->regs[destreg] = lo | hi; - break; - - default: - printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n", - width_shift, (unsigned long) regs->pc); - break; - } - } - - return 0; -} - -static int misaligned_store(struct pt_regs *regs, - insn_size_t opcode, - int displacement_not_indexed, - int width_shift) -{ - /* Return -1 for a fault, 0 for OK */ - int error; - int srcreg; - __u64 address; - - error = generate_and_check_address(regs, opcode, - displacement_not_indexed, width_shift, &address); - if (error < 0) - return error; - - srcreg = (opcode >> 4) & 0x3f; - if (user_mode(regs)) { - __u64 buffer; - - if (!access_ok((unsigned long) address, 1UL<regs[srcreg]; - break; - case 2: - *(__u32 *) &buffer = (__u32) regs->regs[srcreg]; - break; - case 3: - buffer = regs->regs[srcreg]; - break; - default: - printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n", - width_shift, (unsigned long) regs->pc); - break; - } - - if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) { - return -1; /* fault */ - } - } else { - /* kernel mode - we can take short cuts since if we fault, it's a genuine bug */ - __u64 val = regs->regs[srcreg]; - - switch (width_shift) { - case 1: - misaligned_kernel_word_store(address, val); - break; - case 2: - asm ("stlo.l %1, 0, %0" : : "r" (val), "r" (address)); - asm ("sthi.l %1, 3, %0" : : "r" (val), "r" (address)); - break; - case 3: - asm ("stlo.q %1, 0, %0" : : "r" (val), "r" (address)); - asm ("sthi.q %1, 7, %0" : : "r" (val), "r" (address)); - break; - - default: - printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n", - width_shift, (unsigned long) regs->pc); - break; - } - } - - return 0; -} - -/* Never need to fix up misaligned FPU accesses within the kernel since that's a real - error. */ -static int misaligned_fpu_load(struct pt_regs *regs, - insn_size_t opcode, - int displacement_not_indexed, - int width_shift, - int do_paired_load) -{ - /* Return -1 for a fault, 0 for OK */ - int error; - int destreg; - __u64 address; - - error = generate_and_check_address(regs, opcode, - displacement_not_indexed, width_shift, &address); - if (error < 0) - return error; - - destreg = (opcode >> 4) & 0x3f; - if (user_mode(regs)) { - __u64 buffer; - __u32 buflo, bufhi; - - if (!access_ok((unsigned long) address, 1UL< 0) { - return -1; /* fault */ - } - /* 'current' may be the current owner of the FPU state, so - context switch the registers into memory so they can be - indexed by register number. */ - if (last_task_used_math == current) { - enable_fpu(); - save_fpu(current); - disable_fpu(); - last_task_used_math = NULL; - regs->sr |= SR_FD; - } - - buflo = *(__u32*) &buffer; - bufhi = *(1 + (__u32*) &buffer); - - switch (width_shift) { - case 2: - current->thread.xstate->hardfpu.fp_regs[destreg] = buflo; - break; - case 3: - if (do_paired_load) { - current->thread.xstate->hardfpu.fp_regs[destreg] = buflo; - current->thread.xstate->hardfpu.fp_regs[destreg+1] = bufhi; - } else { -#if defined(CONFIG_CPU_LITTLE_ENDIAN) - current->thread.xstate->hardfpu.fp_regs[destreg] = bufhi; - current->thread.xstate->hardfpu.fp_regs[destreg+1] = buflo; -#else - current->thread.xstate->hardfpu.fp_regs[destreg] = buflo; - current->thread.xstate->hardfpu.fp_regs[destreg+1] = bufhi; -#endif - } - break; - default: - printk("Unexpected width_shift %d in misaligned_fpu_load, PC=%08lx\n", - width_shift, (unsigned long) regs->pc); - break; - } - return 0; - } else { - die ("Misaligned FPU load inside kernel", regs, 0); - return -1; - } -} - -static int misaligned_fpu_store(struct pt_regs *regs, - insn_size_t opcode, - int displacement_not_indexed, - int width_shift, - int do_paired_load) -{ - /* Return -1 for a fault, 0 for OK */ - int error; - int srcreg; - __u64 address; - - error = generate_and_check_address(regs, opcode, - displacement_not_indexed, width_shift, &address); - if (error < 0) - return error; - - srcreg = (opcode >> 4) & 0x3f; - if (user_mode(regs)) { - __u64 buffer; - /* Initialise these to NaNs. */ - __u32 buflo=0xffffffffUL, bufhi=0xffffffffUL; - - if (!access_ok((unsigned long) address, 1UL<sr |= SR_FD; - } - - switch (width_shift) { - case 2: - buflo = current->thread.xstate->hardfpu.fp_regs[srcreg]; - break; - case 3: - if (do_paired_load) { - buflo = current->thread.xstate->hardfpu.fp_regs[srcreg]; - bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg+1]; - } else { -#if defined(CONFIG_CPU_LITTLE_ENDIAN) - bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg]; - buflo = current->thread.xstate->hardfpu.fp_regs[srcreg+1]; -#else - buflo = current->thread.xstate->hardfpu.fp_regs[srcreg]; - bufhi = current->thread.xstate->hardfpu.fp_regs[srcreg+1]; -#endif - } - break; - default: - printk("Unexpected width_shift %d in misaligned_fpu_store, PC=%08lx\n", - width_shift, (unsigned long) regs->pc); - break; - } - - *(__u32*) &buffer = buflo; - *(1 + (__u32*) &buffer) = bufhi; - if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) { - return -1; /* fault */ - } - return 0; - } else { - die ("Misaligned FPU load inside kernel", regs, 0); - return -1; - } -} - -static int misaligned_fixup(struct pt_regs *regs) -{ - insn_size_t opcode; - int error; - int major, minor; - unsigned int user_action; - - user_action = unaligned_user_action(); - if (!(user_action & UM_FIXUP)) - return -1; - - error = read_opcode(regs->pc, &opcode, user_mode(regs)); - if (error < 0) { - return error; - } - major = (opcode >> 26) & 0x3f; - minor = (opcode >> 16) & 0xf; - - switch (major) { - case (0x84>>2): /* LD.W */ - error = misaligned_load(regs, opcode, 1, 1, 1); - break; - case (0xb0>>2): /* LD.UW */ - error = misaligned_load(regs, opcode, 1, 1, 0); - break; - case (0x88>>2): /* LD.L */ - error = misaligned_load(regs, opcode, 1, 2, 1); - break; - case (0x8c>>2): /* LD.Q */ - error = misaligned_load(regs, opcode, 1, 3, 0); - break; - - case (0xa4>>2): /* ST.W */ - error = misaligned_store(regs, opcode, 1, 1); - break; - case (0xa8>>2): /* ST.L */ - error = misaligned_store(regs, opcode, 1, 2); - break; - case (0xac>>2): /* ST.Q */ - error = misaligned_store(regs, opcode, 1, 3); - break; - - case (0x40>>2): /* indexed loads */ - switch (minor) { - case 0x1: /* LDX.W */ - error = misaligned_load(regs, opcode, 0, 1, 1); - break; - case 0x5: /* LDX.UW */ - error = misaligned_load(regs, opcode, 0, 1, 0); - break; - case 0x2: /* LDX.L */ - error = misaligned_load(regs, opcode, 0, 2, 1); - break; - case 0x3: /* LDX.Q */ - error = misaligned_load(regs, opcode, 0, 3, 0); - break; - default: - error = -1; - break; - } - break; - - case (0x60>>2): /* indexed stores */ - switch (minor) { - case 0x1: /* STX.W */ - error = misaligned_store(regs, opcode, 0, 1); - break; - case 0x2: /* STX.L */ - error = misaligned_store(regs, opcode, 0, 2); - break; - case 0x3: /* STX.Q */ - error = misaligned_store(regs, opcode, 0, 3); - break; - default: - error = -1; - break; - } - break; - - case (0x94>>2): /* FLD.S */ - error = misaligned_fpu_load(regs, opcode, 1, 2, 0); - break; - case (0x98>>2): /* FLD.P */ - error = misaligned_fpu_load(regs, opcode, 1, 3, 1); - break; - case (0x9c>>2): /* FLD.D */ - error = misaligned_fpu_load(regs, opcode, 1, 3, 0); - break; - case (0x1c>>2): /* floating indexed loads */ - switch (minor) { - case 0x8: /* FLDX.S */ - error = misaligned_fpu_load(regs, opcode, 0, 2, 0); - break; - case 0xd: /* FLDX.P */ - error = misaligned_fpu_load(regs, opcode, 0, 3, 1); - break; - case 0x9: /* FLDX.D */ - error = misaligned_fpu_load(regs, opcode, 0, 3, 0); - break; - default: - error = -1; - break; - } - break; - case (0xb4>>2): /* FLD.S */ - error = misaligned_fpu_store(regs, opcode, 1, 2, 0); - break; - case (0xb8>>2): /* FLD.P */ - error = misaligned_fpu_store(regs, opcode, 1, 3, 1); - break; - case (0xbc>>2): /* FLD.D */ - error = misaligned_fpu_store(regs, opcode, 1, 3, 0); - break; - case (0x3c>>2): /* floating indexed stores */ - switch (minor) { - case 0x8: /* FSTX.S */ - error = misaligned_fpu_store(regs, opcode, 0, 2, 0); - break; - case 0xd: /* FSTX.P */ - error = misaligned_fpu_store(regs, opcode, 0, 3, 1); - break; - case 0x9: /* FSTX.D */ - error = misaligned_fpu_store(regs, opcode, 0, 3, 0); - break; - default: - error = -1; - break; - } - break; - - default: - /* Fault */ - error = -1; - break; - } - - if (error < 0) { - return error; - } else { - regs->pc += 4; /* Skip the instruction that's just been emulated */ - return 0; - } -} - -static void do_unhandled_exception(int signr, char *str, unsigned long error, - struct pt_regs *regs) -{ - if (user_mode(regs)) - force_sig(signr); - - die_if_no_fixup(str, regs, error); -} - -#define DO_ERROR(signr, str, name) \ -asmlinkage void do_##name(unsigned long error_code, struct pt_regs *regs) \ -{ \ - do_unhandled_exception(signr, str, error_code, regs); \ -} - -DO_ERROR(SIGILL, "illegal slot instruction", illegal_slot_inst) -DO_ERROR(SIGSEGV, "address error (exec)", address_error_exec) - -#if defined(CONFIG_SH64_ID2815_WORKAROUND) - -#define OPCODE_INVALID 0 -#define OPCODE_USER_VALID 1 -#define OPCODE_PRIV_VALID 2 - -/* getcon/putcon - requires checking which control register is referenced. */ -#define OPCODE_CTRL_REG 3 - -/* Table of valid opcodes for SHmedia mode. - Form a 10-bit value by concatenating the major/minor opcodes i.e. - opcode[31:26,20:16]. The 6 MSBs of this value index into the following - array. The 4 LSBs select the bit-pair in the entry (bits 1:0 correspond to - LSBs==4'b0000 etc). */ -static unsigned long shmedia_opcode_table[64] = { - 0x55554044,0x54445055,0x15141514,0x14541414,0x00000000,0x10001000,0x01110055,0x04050015, - 0x00000444,0xc0000000,0x44545515,0x40405555,0x55550015,0x10005555,0x55555505,0x04050000, - 0x00000555,0x00000404,0x00040445,0x15151414,0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000055,0x40404444,0x00000404,0xc0009495,0x00000000,0x00000000,0x00000000,0x00000000, - 0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555, - 0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555, - 0x80005050,0x04005055,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555, - 0x81055554,0x00000404,0x55555555,0x55555555,0x00000000,0x00000000,0x00000000,0x00000000 -}; - -/* Workaround SH5-101 cut2 silicon defect #2815 : - in some situations, inter-mode branches from SHcompact -> SHmedia - which should take ITLBMISS or EXECPROT exceptions at the target - falsely take RESINST at the target instead. */ -void do_reserved_inst(unsigned long error_code, struct pt_regs *regs) -{ - insn_size_t opcode = 0x6ff4fff0; /* guaranteed reserved opcode */ - unsigned long pc, aligned_pc; - unsigned long index, shift; - unsigned long major, minor, combined; - unsigned long reserved_field; - int opcode_state; - int get_user_error; - int signr = SIGILL; - char *exception_name = "reserved_instruction"; - - pc = regs->pc; - - /* SHcompact is not handled */ - if (unlikely((pc & 3) == 0)) - goto out; - - /* SHmedia : check for defect. This requires executable vmas - to be readable too. */ - aligned_pc = pc & ~3; - if (!access_ok(aligned_pc, sizeof(insn_size_t))) - get_user_error = -EFAULT; - else - get_user_error = __get_user(opcode, (insn_size_t *)aligned_pc); - - if (get_user_error < 0) { - /* - * Error trying to read opcode. This typically means a - * real fault, not a RESINST any more. So change the - * codes. - */ - exception_name = "address error (exec)"; - signr = SIGSEGV; - goto out; - } - - /* These bits are currently reserved as zero in all valid opcodes */ - reserved_field = opcode & 0xf; - if (unlikely(reserved_field)) - goto out; /* invalid opcode */ - - major = (opcode >> 26) & 0x3f; - minor = (opcode >> 16) & 0xf; - combined = (major << 4) | minor; - index = major; - shift = minor << 1; - opcode_state = (shmedia_opcode_table[index] >> shift) & 0x3; - switch (opcode_state) { - case OPCODE_INVALID: - /* Trap. */ - break; - case OPCODE_USER_VALID: - /* - * Restart the instruction: the branch to the instruction - * will now be from an RTE not from SHcompact so the - * silicon defect won't be triggered. - */ - return; - case OPCODE_PRIV_VALID: - if (!user_mode(regs)) { - /* - * Should only ever get here if a module has - * SHcompact code inside it. If so, the same fix - * up is needed. - */ - return; /* same reason */ - } - - /* - * Otherwise, user mode trying to execute a privileged - * instruction - fall through to trap. - */ - break; - case OPCODE_CTRL_REG: - /* If in privileged mode, return as above. */ - if (!user_mode(regs)) - return; - - /* In user mode ... */ - if (combined == 0x9f) { /* GETCON */ - unsigned long regno = (opcode >> 20) & 0x3f; - - if (regno >= 62) - return; - - /* reserved/privileged control register => trap */ - } else if (combined == 0x1bf) { /* PUTCON */ - unsigned long regno = (opcode >> 4) & 0x3f; - - if (regno >= 62) - return; - - /* reserved/privileged control register => trap */ - } - - break; - default: - /* Fall through to trap. */ - break; - } - -out: - do_unhandled_exception(signr, exception_name, error_code, regs); -} - -#else /* CONFIG_SH64_ID2815_WORKAROUND */ - -/* If the workaround isn't needed, this is just a straightforward reserved - instruction */ -DO_ERROR(SIGILL, "reserved instruction", reserved_inst) - -#endif /* CONFIG_SH64_ID2815_WORKAROUND */ - -/* Called with interrupts disabled */ -asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs) -{ - die_if_kernel("exception", regs, ex); -} - -asmlinkage int do_unknown_trapa(unsigned long scId, struct pt_regs *regs) -{ - /* Syscall debug */ - printk("System call ID error: [0x1#args:8 #syscall:16 0x%lx]\n", scId); - - die_if_kernel("unknown trapa", regs, scId); - - return -ENOSYS; -} - -/* Implement misaligned load/store handling for kernel (and optionally for user - mode too). Limitation : only SHmedia mode code is handled - there is no - handling at all for misaligned accesses occurring in SHcompact code yet. */ - -asmlinkage void do_address_error_load(unsigned long error_code, struct pt_regs *regs) -{ - if (misaligned_fixup(regs) < 0) - do_unhandled_exception(SIGSEGV, "address error(load)", - error_code, regs); -} - -asmlinkage void do_address_error_store(unsigned long error_code, struct pt_regs *regs) -{ - if (misaligned_fixup(regs) < 0) - do_unhandled_exception(SIGSEGV, "address error(store)", - error_code, regs); -} - -asmlinkage void do_debug_interrupt(unsigned long code, struct pt_regs *regs) -{ - u64 peek_real_address_q(u64 addr); - u64 poke_real_address_q(u64 addr, u64 val); - unsigned long long DM_EXP_CAUSE_PHY = 0x0c100010; - unsigned long long exp_cause; - /* It's not worth ioremapping the debug module registers for the amount - of access we make to them - just go direct to their physical - addresses. */ - exp_cause = peek_real_address_q(DM_EXP_CAUSE_PHY); - if (exp_cause & ~4) - printk("DM.EXP_CAUSE had unexpected bits set (=%08lx)\n", - (unsigned long)(exp_cause & 0xffffffff)); - show_state(); - /* Clear all DEBUGINT causes */ - poke_real_address_q(DM_EXP_CAUSE_PHY, 0x0); -} - -void per_cpu_trap_init(void) -{ - /* Nothing to do for now, VBR initialization later. */ -} diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index c60b19958c35..bde7a6c01aaf 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -3,14 +3,7 @@ * ld script to make SuperH Linux kernel * Written by Niibe Yutaka and Paul Mundt */ -#ifdef CONFIG_SUPERH64 -#define LOAD_OFFSET PAGE_OFFSET -OUTPUT_ARCH(sh:sh5) -#else -#define LOAD_OFFSET 0 OUTPUT_ARCH(sh) -#endif - #include #include #include @@ -28,14 +21,13 @@ SECTIONS _text = .; /* Text and read-only data */ - .empty_zero_page : AT(ADDR(.empty_zero_page) - LOAD_OFFSET) { + .empty_zero_page : AT(ADDR(.empty_zero_page)) { *(.empty_zero_page) } = 0 - .text : AT(ADDR(.text) - LOAD_OFFSET) { + .text : AT(ADDR(.text)) { HEAD_TEXT TEXT_TEXT - EXTRA_TEXT SCHED_TEXT CPUIDLE_TEXT LOCK_TEXT @@ -62,7 +54,7 @@ SECTIONS INIT_DATA_SECTION(16) . = ALIGN(4); - .machvec.init : AT(ADDR(.machvec.init) - LOAD_OFFSET) { + .machvec.init : AT(ADDR(.machvec.init)) { __machvec_start = .; *(.machvec.init) __machvec_end = .; @@ -74,8 +66,8 @@ SECTIONS * .exit.text is discarded at runtime, not link time, to deal with * references from __bug_table */ - .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { EXIT_TEXT } - .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { EXIT_DATA } + .exit.text : AT(ADDR(.exit.text)) { EXIT_TEXT } + .exit.data : AT(ADDR(.exit.data)) { EXIT_DATA } . = ALIGN(PAGE_SIZE); __init_end = .; diff --git a/arch/sh/lib64/Makefile b/arch/sh/lib64/Makefile deleted file mode 100644 index 69779ff741df..000000000000 --- a/arch/sh/lib64/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -# -# Makefile for the SH-5 specific library files.. -# -# Copyright (C) 2000, 2001 Paolo Alberelli -# Copyright (C) 2003 - 2008 Paul Mundt -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# - -# Panic should really be compiled as PIC -lib-y := udelay.o panic.o memcpy.o memset.o \ - copy_user_memcpy.o copy_page.o strcpy.o strlen.o - -# Extracted from libgcc -lib-y += udivsi3.o udivdi3.o sdivsi3.o diff --git a/arch/sh/lib64/copy_page.S b/arch/sh/lib64/copy_page.S deleted file mode 100644 index 0ec6fca63b56..000000000000 --- a/arch/sh/lib64/copy_page.S +++ /dev/null @@ -1,89 +0,0 @@ -/* - Copyright 2003 Richard Curnow, SuperH (UK) Ltd. - - This file is subject to the terms and conditions of the GNU General Public - License. See the file "COPYING" in the main directory of this archive - for more details. - - Tight version of mempy for the case of just copying a page. - Prefetch strategy empirically optimised against RTL simulations - of SH5-101 cut2 eval chip with Cayman board DDR memory. - - Parameters: - r2 : destination effective address (start of page) - r3 : source effective address (start of page) - - Always copies 4096 bytes. - - Points to review. - * Currently the prefetch is 4 lines ahead and the alloco is 2 lines ahead. - It seems like the prefetch needs to be at at least 4 lines ahead to get - the data into the cache in time, and the allocos contend with outstanding - prefetches for the same cache set, so it's better to have the numbers - different. - */ - - .section .text..SHmedia32,"ax" - .little - - .balign 8 - .global copy_page -copy_page: - - /* Copy 4096 bytes worth of data from r3 to r2. - Do prefetches 4 lines ahead. - Do alloco 2 lines ahead */ - - pta 1f, tr1 - pta 2f, tr2 - pta 3f, tr3 - ptabs r18, tr0 - -#if 0 - /* TAKum03020 */ - ld.q r3, 0x00, r63 - ld.q r3, 0x20, r63 - ld.q r3, 0x40, r63 - ld.q r3, 0x60, r63 -#endif - alloco r2, 0x00 - synco ! TAKum03020 - alloco r2, 0x20 - synco ! TAKum03020 - - movi 3968, r6 - add r2, r6, r6 - addi r6, 64, r7 - addi r7, 64, r8 - sub r3, r2, r60 - addi r60, 8, r61 - addi r61, 8, r62 - addi r62, 8, r23 - addi r60, 0x80, r22 - -/* Minimal code size. The extra branches inside the loop don't cost much - because they overlap with the time spent waiting for prefetches to - complete. */ -1: -#if 0 - /* TAKum03020 */ - bge/u r2, r6, tr2 ! skip prefetch for last 4 lines - ldx.q r2, r22, r63 ! prefetch 4 lines hence -#endif -2: - bge/u r2, r7, tr3 ! skip alloco for last 2 lines - alloco r2, 0x40 ! alloc destination line 2 lines ahead - synco ! TAKum03020 -3: - ldx.q r2, r60, r36 - ldx.q r2, r61, r37 - ldx.q r2, r62, r38 - ldx.q r2, r23, r39 - st.q r2, 0, r36 - st.q r2, 8, r37 - st.q r2, 16, r38 - st.q r2, 24, r39 - addi r2, 32, r2 - bgt/l r8, r2, tr1 - - blink tr0, r63 ! return diff --git a/arch/sh/lib64/copy_user_memcpy.S b/arch/sh/lib64/copy_user_memcpy.S deleted file mode 100644 index 515f81b00202..000000000000 --- a/arch/sh/lib64/copy_user_memcpy.S +++ /dev/null @@ -1,218 +0,0 @@ -! SPDX-License-Identifier: GPL-2.0 -! -! Fast SH memcpy -! -! by Toshiyasu Morita (tm@netcom.com) -! hacked by J"orn Rernnecke (joern.rennecke@superh.com) ("o for o-umlaut) -! SH5 code Copyright 2002 SuperH Ltd. -! -! Entry: ARG0: destination pointer -! ARG1: source pointer -! ARG2: byte count -! -! Exit: RESULT: destination pointer -! any other registers in the range r0-r7: trashed -! -! Notes: Usually one wants to do small reads and write a longword, but -! unfortunately it is difficult in some cases to concatanate bytes -! into a longword on the SH, so this does a longword read and small -! writes. -! -! This implementation makes two assumptions about how it is called: -! -! 1.: If the byte count is nonzero, the address of the last byte to be -! copied is unsigned greater than the address of the first byte to -! be copied. This could be easily swapped for a signed comparison, -! but the algorithm used needs some comparison. -! -! 2.: When there are two or three bytes in the last word of an 11-or-more -! bytes memory chunk to b copied, the rest of the word can be read -! without side effects. -! This could be easily changed by increasing the minimum size of -! a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2, -! however, this would cost a few extra cyles on average. -! For SHmedia, the assumption is that any quadword can be read in its -! enirety if at least one byte is included in the copy. - -/* Imported into Linux kernel by Richard Curnow. This is used to implement the - __copy_user function in the general case, so it has to be a distinct - function from intra-kernel memcpy to allow for exception fix-ups in the - event that the user pointer is bad somewhere in the copy (e.g. due to - running off the end of the vma). - - Note, this algorithm will be slightly wasteful in the case where the source - and destination pointers are equally aligned, because the stlo/sthi pairs - could then be merged back into single stores. If there are a lot of cache - misses, this is probably offset by the stall lengths on the preloads. - -*/ - -/* NOTE : Prefetches removed and allocos guarded by synco to avoid TAKum03020 - * erratum. The first two prefetches are nop-ed out to avoid upsetting the - * instruction counts used in the jump address calculation. - * */ - - .section .text..SHmedia32,"ax" - .little - .balign 32 - .global copy_user_memcpy - .global copy_user_memcpy_end -copy_user_memcpy: - -#define LDUAQ(P,O,D0,D1) ldlo.q P,O,D0; ldhi.q P,O+7,D1 -#define STUAQ(P,O,D0,D1) stlo.q P,O,D0; sthi.q P,O+7,D1 -#define LDUAL(P,O,D0,D1) ldlo.l P,O,D0; ldhi.l P,O+3,D1 -#define STUAL(P,O,D0,D1) stlo.l P,O,D0; sthi.l P,O+3,D1 - - nop ! ld.b r3,0,r63 ! TAKum03020 - pta/l Large,tr0 - movi 25,r0 - bgeu/u r4,r0,tr0 - nsb r4,r0 - shlli r0,5,r0 - movi (L1-L0+63*32 + 1) & 0xffff,r1 - sub r1, r0, r0 -L0: ptrel r0,tr0 - add r2,r4,r5 - ptabs r18,tr1 - add r3,r4,r6 - blink tr0,r63 - -/* Rearranged to make cut2 safe */ - .balign 8 -L4_7: /* 4..7 byte memcpy cntd. */ - stlo.l r2, 0, r0 - or r6, r7, r6 - sthi.l r5, -1, r6 - stlo.l r5, -4, r6 - blink tr1,r63 - - .balign 8 -L1: /* 0 byte memcpy */ - nop - blink tr1,r63 - nop - nop - nop - nop - -L2_3: /* 2 or 3 byte memcpy cntd. */ - st.b r5,-1,r6 - blink tr1,r63 - - /* 1 byte memcpy */ - ld.b r3,0,r0 - st.b r2,0,r0 - blink tr1,r63 - -L8_15: /* 8..15 byte memcpy cntd. */ - stlo.q r2, 0, r0 - or r6, r7, r6 - sthi.q r5, -1, r6 - stlo.q r5, -8, r6 - blink tr1,r63 - - /* 2 or 3 byte memcpy */ - ld.b r3,0,r0 - nop ! ld.b r2,0,r63 ! TAKum03020 - ld.b r3,1,r1 - st.b r2,0,r0 - pta/l L2_3,tr0 - ld.b r6,-1,r6 - st.b r2,1,r1 - blink tr0, r63 - - /* 4 .. 7 byte memcpy */ - LDUAL (r3, 0, r0, r1) - pta L4_7, tr0 - ldlo.l r6, -4, r7 - or r0, r1, r0 - sthi.l r2, 3, r0 - ldhi.l r6, -1, r6 - blink tr0, r63 - - /* 8 .. 15 byte memcpy */ - LDUAQ (r3, 0, r0, r1) - pta L8_15, tr0 - ldlo.q r6, -8, r7 - or r0, r1, r0 - sthi.q r2, 7, r0 - ldhi.q r6, -1, r6 - blink tr0, r63 - - /* 16 .. 24 byte memcpy */ - LDUAQ (r3, 0, r0, r1) - LDUAQ (r3, 8, r8, r9) - or r0, r1, r0 - sthi.q r2, 7, r0 - or r8, r9, r8 - sthi.q r2, 15, r8 - ldlo.q r6, -8, r7 - ldhi.q r6, -1, r6 - stlo.q r2, 8, r8 - stlo.q r2, 0, r0 - or r6, r7, r6 - sthi.q r5, -1, r6 - stlo.q r5, -8, r6 - blink tr1,r63 - -Large: - ! ld.b r2, 0, r63 ! TAKum03020 - pta/l Loop_ua, tr1 - ori r3, -8, r7 - sub r2, r7, r22 - sub r3, r2, r6 - add r2, r4, r5 - ldlo.q r3, 0, r0 - addi r5, -16, r5 - movi 64+8, r27 ! could subtract r7 from that. - stlo.q r2, 0, r0 - sthi.q r2, 7, r0 - ldx.q r22, r6, r0 - bgtu/l r27, r4, tr1 - - addi r5, -48, r27 - pta/l Loop_line, tr0 - addi r6, 64, r36 - addi r6, -24, r19 - addi r6, -16, r20 - addi r6, -8, r21 - -Loop_line: - ! ldx.q r22, r36, r63 ! TAKum03020 - alloco r22, 32 - synco - addi r22, 32, r22 - ldx.q r22, r19, r23 - sthi.q r22, -25, r0 - ldx.q r22, r20, r24 - ldx.q r22, r21, r25 - stlo.q r22, -32, r0 - ldx.q r22, r6, r0 - sthi.q r22, -17, r23 - sthi.q r22, -9, r24 - sthi.q r22, -1, r25 - stlo.q r22, -24, r23 - stlo.q r22, -16, r24 - stlo.q r22, -8, r25 - bgeu r27, r22, tr0 - -Loop_ua: - addi r22, 8, r22 - sthi.q r22, -1, r0 - stlo.q r22, -8, r0 - ldx.q r22, r6, r0 - bgtu/l r5, r22, tr1 - - add r3, r4, r7 - ldlo.q r7, -8, r1 - sthi.q r22, 7, r0 - ldhi.q r7, -1, r7 - ptabs r18,tr1 - stlo.q r22, 0, r0 - or r1, r7, r1 - sthi.q r5, 15, r1 - stlo.q r5, 8, r1 - blink tr1, r63 -copy_user_memcpy_end: - nop diff --git a/arch/sh/lib64/memcpy.S b/arch/sh/lib64/memcpy.S deleted file mode 100644 index 231ea595b39a..000000000000 --- a/arch/sh/lib64/memcpy.S +++ /dev/null @@ -1,202 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */ -/* Modified by SuperH, Inc. September 2003 */ -! -! Fast SH memcpy -! -! by Toshiyasu Morita (tm@netcom.com) -! hacked by J"orn Rernnecke (joern.rennecke@superh.com) ("o for o-umlaut) -! SH5 code Copyright 2002 SuperH Ltd. -! -! Entry: ARG0: destination pointer -! ARG1: source pointer -! ARG2: byte count -! -! Exit: RESULT: destination pointer -! any other registers in the range r0-r7: trashed -! -! Notes: Usually one wants to do small reads and write a longword, but -! unfortunately it is difficult in some cases to concatanate bytes -! into a longword on the SH, so this does a longword read and small -! writes. -! -! This implementation makes two assumptions about how it is called: -! -! 1.: If the byte count is nonzero, the address of the last byte to be -! copied is unsigned greater than the address of the first byte to -! be copied. This could be easily swapped for a signed comparison, -! but the algorithm used needs some comparison. -! -! 2.: When there are two or three bytes in the last word of an 11-or-more -! bytes memory chunk to b copied, the rest of the word can be read -! without side effects. -! This could be easily changed by increasing the minimum size of -! a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2, -! however, this would cost a few extra cyles on average. -! For SHmedia, the assumption is that any quadword can be read in its -! enirety if at least one byte is included in the copy. -! - - .section .text..SHmedia32,"ax" - .globl memcpy - .type memcpy, @function - .align 5 - -memcpy: - -#define LDUAQ(P,O,D0,D1) ldlo.q P,O,D0; ldhi.q P,O+7,D1 -#define STUAQ(P,O,D0,D1) stlo.q P,O,D0; sthi.q P,O+7,D1 -#define LDUAL(P,O,D0,D1) ldlo.l P,O,D0; ldhi.l P,O+3,D1 -#define STUAL(P,O,D0,D1) stlo.l P,O,D0; sthi.l P,O+3,D1 - - ld.b r3,0,r63 - pta/l Large,tr0 - movi 25,r0 - bgeu/u r4,r0,tr0 - nsb r4,r0 - shlli r0,5,r0 - movi (L1-L0+63*32 + 1) & 0xffff,r1 - sub r1, r0, r0 -L0: ptrel r0,tr0 - add r2,r4,r5 - ptabs r18,tr1 - add r3,r4,r6 - blink tr0,r63 - -/* Rearranged to make cut2 safe */ - .balign 8 -L4_7: /* 4..7 byte memcpy cntd. */ - stlo.l r2, 0, r0 - or r6, r7, r6 - sthi.l r5, -1, r6 - stlo.l r5, -4, r6 - blink tr1,r63 - - .balign 8 -L1: /* 0 byte memcpy */ - nop - blink tr1,r63 - nop - nop - nop - nop - -L2_3: /* 2 or 3 byte memcpy cntd. */ - st.b r5,-1,r6 - blink tr1,r63 - - /* 1 byte memcpy */ - ld.b r3,0,r0 - st.b r2,0,r0 - blink tr1,r63 - -L8_15: /* 8..15 byte memcpy cntd. */ - stlo.q r2, 0, r0 - or r6, r7, r6 - sthi.q r5, -1, r6 - stlo.q r5, -8, r6 - blink tr1,r63 - - /* 2 or 3 byte memcpy */ - ld.b r3,0,r0 - ld.b r2,0,r63 - ld.b r3,1,r1 - st.b r2,0,r0 - pta/l L2_3,tr0 - ld.b r6,-1,r6 - st.b r2,1,r1 - blink tr0, r63 - - /* 4 .. 7 byte memcpy */ - LDUAL (r3, 0, r0, r1) - pta L4_7, tr0 - ldlo.l r6, -4, r7 - or r0, r1, r0 - sthi.l r2, 3, r0 - ldhi.l r6, -1, r6 - blink tr0, r63 - - /* 8 .. 15 byte memcpy */ - LDUAQ (r3, 0, r0, r1) - pta L8_15, tr0 - ldlo.q r6, -8, r7 - or r0, r1, r0 - sthi.q r2, 7, r0 - ldhi.q r6, -1, r6 - blink tr0, r63 - - /* 16 .. 24 byte memcpy */ - LDUAQ (r3, 0, r0, r1) - LDUAQ (r3, 8, r8, r9) - or r0, r1, r0 - sthi.q r2, 7, r0 - or r8, r9, r8 - sthi.q r2, 15, r8 - ldlo.q r6, -8, r7 - ldhi.q r6, -1, r6 - stlo.q r2, 8, r8 - stlo.q r2, 0, r0 - or r6, r7, r6 - sthi.q r5, -1, r6 - stlo.q r5, -8, r6 - blink tr1,r63 - -Large: - ld.b r2, 0, r63 - pta/l Loop_ua, tr1 - ori r3, -8, r7 - sub r2, r7, r22 - sub r3, r2, r6 - add r2, r4, r5 - ldlo.q r3, 0, r0 - addi r5, -16, r5 - movi 64+8, r27 // could subtract r7 from that. - stlo.q r2, 0, r0 - sthi.q r2, 7, r0 - ldx.q r22, r6, r0 - bgtu/l r27, r4, tr1 - - addi r5, -48, r27 - pta/l Loop_line, tr0 - addi r6, 64, r36 - addi r6, -24, r19 - addi r6, -16, r20 - addi r6, -8, r21 - -Loop_line: - ldx.q r22, r36, r63 - alloco r22, 32 - addi r22, 32, r22 - ldx.q r22, r19, r23 - sthi.q r22, -25, r0 - ldx.q r22, r20, r24 - ldx.q r22, r21, r25 - stlo.q r22, -32, r0 - ldx.q r22, r6, r0 - sthi.q r22, -17, r23 - sthi.q r22, -9, r24 - sthi.q r22, -1, r25 - stlo.q r22, -24, r23 - stlo.q r22, -16, r24 - stlo.q r22, -8, r25 - bgeu r27, r22, tr0 - -Loop_ua: - addi r22, 8, r22 - sthi.q r22, -1, r0 - stlo.q r22, -8, r0 - ldx.q r22, r6, r0 - bgtu/l r5, r22, tr1 - - add r3, r4, r7 - ldlo.q r7, -8, r1 - sthi.q r22, 7, r0 - ldhi.q r7, -1, r7 - ptabs r18,tr1 - stlo.q r22, 0, r0 - or r1, r7, r1 - sthi.q r5, 15, r1 - stlo.q r5, 8, r1 - blink tr1, r63 - - .size memcpy,.-memcpy diff --git a/arch/sh/lib64/memset.S b/arch/sh/lib64/memset.S deleted file mode 100644 index 453aa5f1d263..000000000000 --- a/arch/sh/lib64/memset.S +++ /dev/null @@ -1,92 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */ -/* Modified by SuperH, Inc. September 2003 */ -! -! Fast SH memset -! -! by Toshiyasu Morita (tm@netcom.com) -! -! SH5 code by J"orn Rennecke (joern.rennecke@superh.com) -! Copyright 2002 SuperH Ltd. -! - -#if __BYTE_ORDER == __LITTLE_ENDIAN -#define SHHI shlld -#define SHLO shlrd -#else -#define SHHI shlrd -#define SHLO shlld -#endif - - .section .text..SHmedia32,"ax" - .globl memset - .type memset, @function - - .align 5 - -memset: - pta/l multiquad, tr0 - andi r2, 7, r22 - ptabs r18, tr2 - mshflo.b r3,r3,r3 - add r4, r22, r23 - mperm.w r3, r63, r3 // Fill pattern now in every byte of r3 - - movi 8, r9 - bgtu/u r23, r9, tr0 // multiquad - - beqi/u r4, 0, tr2 // Return with size 0 - ensures no mem accesses - ldlo.q r2, 0, r7 - shlli r4, 2, r4 - movi -1, r8 - SHHI r8, r4, r8 - SHHI r8, r4, r8 - mcmv r7, r8, r3 - stlo.q r2, 0, r3 - blink tr2, r63 - -multiquad: - pta/l lastquad, tr0 - stlo.q r2, 0, r3 - shlri r23, 3, r24 - add r2, r4, r5 - beqi/u r24, 1, tr0 // lastquad - pta/l loop, tr1 - sub r2, r22, r25 - andi r5, -8, r20 // calculate end address and - addi r20, -7*8, r8 // loop end address; This might overflow, so we need - // to use a different test before we start the loop - bge/u r24, r9, tr1 // loop - st.q r25, 8, r3 - st.q r20, -8, r3 - shlri r24, 1, r24 - beqi/u r24, 1, tr0 // lastquad - st.q r25, 16, r3 - st.q r20, -16, r3 - beqi/u r24, 2, tr0 // lastquad - st.q r25, 24, r3 - st.q r20, -24, r3 -lastquad: - sthi.q r5, -1, r3 - blink tr2,r63 - -loop: -!!! alloco r25, 32 // QQQ comment out for short-term fix to SHUK #3895. - // QQQ commenting out is locically correct, but sub-optimal - // QQQ Sean McGoogan - 4th April 2003. - st.q r25, 8, r3 - st.q r25, 16, r3 - st.q r25, 24, r3 - st.q r25, 32, r3 - addi r25, 32, r25 - bgeu/l r8, r25, tr1 // loop - - st.q r20, -40, r3 - st.q r20, -32, r3 - st.q r20, -24, r3 - st.q r20, -16, r3 - st.q r20, -8, r3 - sthi.q r5, -1, r3 - blink tr2,r63 - - .size memset,.-memset diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c deleted file mode 100644 index 38c954e04f6a..000000000000 --- a/arch/sh/lib64/panic.c +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2003 Richard Curnow, SuperH UK Limited - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -void -panic_handler(unsigned long panicPC, unsigned long panicSSR, - unsigned long panicEXPEVT) -{ - /* Never return from the panic handler */ - for (;;) ; -} diff --git a/arch/sh/lib64/sdivsi3.S b/arch/sh/lib64/sdivsi3.S deleted file mode 100644 index b422e2374430..000000000000 --- a/arch/sh/lib64/sdivsi3.S +++ /dev/null @@ -1,136 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - .global __sdivsi3 - .global __sdivsi3_1 - .global __sdivsi3_2 - .section .text..SHmedia32,"ax" - .align 2 - - /* inputs: r4,r5 */ - /* clobbered: r1,r18,r19,r20,r21,r25,tr0 */ - /* result in r0 */ -__sdivsi3: -__sdivsi3_1: - ptb __div_table,tr0 - gettr tr0,r20 - -__sdivsi3_2: - nsb r5, r1 - shlld r5, r1, r25 /* normalize; [-2 ..1, 1..2) in s2.62 */ - shari r25, 58, r21 /* extract 5(6) bit index (s2.4 with hole -1..1) */ - /* bubble */ - ldx.ub r20, r21, r19 /* u0.8 */ - shari r25, 32, r25 /* normalize to s2.30 */ - shlli r21, 1, r21 - muls.l r25, r19, r19 /* s2.38 */ - ldx.w r20, r21, r21 /* s2.14 */ - ptabs r18, tr0 - shari r19, 24, r19 /* truncate to s2.14 */ - sub r21, r19, r19 /* some 11 bit inverse in s1.14 */ - muls.l r19, r19, r21 /* u0.28 */ - sub r63, r1, r1 - addi r1, 92, r1 - muls.l r25, r21, r18 /* s2.58 */ - shlli r19, 45, r19 /* multiply by two and convert to s2.58 */ - /* bubble */ - sub r19, r18, r18 - shari r18, 28, r18 /* some 22 bit inverse in s1.30 */ - muls.l r18, r25, r0 /* s2.60 */ - muls.l r18, r4, r25 /* s32.30 */ - /* bubble */ - shari r0, 16, r19 /* s-16.44 */ - muls.l r19, r18, r19 /* s-16.74 */ - shari r25, 63, r0 - shari r4, 14, r18 /* s19.-14 */ - shari r19, 30, r19 /* s-16.44 */ - muls.l r19, r18, r19 /* s15.30 */ - xor r21, r0, r21 /* You could also use the constant 1 << 27. */ - add r21, r25, r21 - sub r21, r19, r21 - shard r21, r1, r21 - sub r21, r0, r0 - blink tr0, r63 - -/* This table has been generated by divtab.c . -Defects for bias -330: - Max defect: 6.081536e-07 at -1.000000e+00 - Min defect: 2.849516e-08 at 1.030651e+00 - Max 2nd step defect: 9.606539e-12 at -1.000000e+00 - Min 2nd step defect: 0.000000e+00 at 0.000000e+00 - Defect at 1: 1.238659e-07 - Defect at -2: 1.061708e-07 */ - - .balign 2 - .type __div_table,@object - .size __div_table,128 -/* negative division constants */ - .word -16638 - .word -17135 - .word -17737 - .word -18433 - .word -19103 - .word -19751 - .word -20583 - .word -21383 - .word -22343 - .word -23353 - .word -24407 - .word -25582 - .word -26863 - .word -28382 - .word -29965 - .word -31800 -/* negative division factors */ - .byte 66 - .byte 70 - .byte 75 - .byte 81 - .byte 87 - .byte 93 - .byte 101 - .byte 109 - .byte 119 - .byte 130 - .byte 142 - .byte 156 - .byte 172 - .byte 192 - .byte 214 - .byte 241 - .skip 16 - .global __div_table -__div_table: - .skip 16 -/* positive division factors */ - .byte 241 - .byte 214 - .byte 192 - .byte 172 - .byte 156 - .byte 142 - .byte 130 - .byte 119 - .byte 109 - .byte 101 - .byte 93 - .byte 87 - .byte 81 - .byte 75 - .byte 70 - .byte 66 -/* positive division constants */ - .word 31801 - .word 29966 - .word 28383 - .word 26864 - .word 25583 - .word 24408 - .word 23354 - .word 22344 - .word 21384 - .word 20584 - .word 19752 - .word 19104 - .word 18434 - .word 17738 - .word 17136 - .word 16639 diff --git a/arch/sh/lib64/strcpy.S b/arch/sh/lib64/strcpy.S deleted file mode 100644 index b61631e523d4..000000000000 --- a/arch/sh/lib64/strcpy.S +++ /dev/null @@ -1,98 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Cloned and hacked for uClibc by Paul Mundt, December 2003 */ -/* Modified by SuperH, Inc. September 2003 */ -! Entry: arg0: destination -! arg1: source -! Exit: result: destination -! -! SH5 code Copyright 2002 SuperH Ltd. - -#if __BYTE_ORDER == __LITTLE_ENDIAN -#define SHHI shlld -#define SHLO shlrd -#else -#define SHHI shlrd -#define SHLO shlld -#endif - - .section .text..SHmedia32,"ax" - .globl strcpy - .type strcpy, @function - .align 5 - -strcpy: - - pta/l shortstring,tr1 - ldlo.q r3,0,r4 - ptabs r18,tr4 - shlli r3,3,r7 - addi r2, 8, r0 - mcmpeq.b r4,r63,r6 - SHHI r6,r7,r6 - bnei/u r6,0,tr1 // shortstring - pta/l no_lddst, tr2 - ori r3,-8,r23 - sub r2, r23, r0 - sub r3, r2, r21 - addi r21, 8, r20 - ldx.q r0, r21, r5 - pta/l loop, tr0 - ori r2,-8,r22 - mcmpeq.b r5, r63, r6 - bgt/u r22, r23, tr2 // no_lddst - - // r22 < r23 : Need to do a load from the destination. - // r22 == r23 : Doesn't actually need to load from destination, - // but still can be handled here. - ldlo.q r2, 0, r9 - movi -1, r8 - SHLO r8, r7, r8 - mcmv r4, r8, r9 - stlo.q r2, 0, r9 - beqi/l r6, 0, tr0 // loop - - add r5, r63, r4 - addi r0, 8, r0 - blink tr1, r63 // shortstring -no_lddst: - // r22 > r23: note that for r22 == r23 the sthi.q would clobber - // bytes before the destination region. - stlo.q r2, 0, r4 - SHHI r4, r7, r4 - sthi.q r0, -1, r4 - beqi/l r6, 0, tr0 // loop - - add r5, r63, r4 - addi r0, 8, r0 -shortstring: -#if __BYTE_ORDER != __LITTLE_ENDIAN - pta/l shortstring2,tr1 - byterev r4,r4 -#endif -shortstring2: - st.b r0,-8,r4 - andi r4,0xff,r5 - shlri r4,8,r4 - addi r0,1,r0 - bnei/l r5,0,tr1 - blink tr4,r63 // return - - .balign 8 -loop: - stlo.q r0, 0, r5 - ldx.q r0, r20, r4 - addi r0, 16, r0 - sthi.q r0, -9, r5 - mcmpeq.b r4, r63, r6 - bnei/u r6, 0, tr1 // shortstring - ldx.q r0, r21, r5 - stlo.q r0, -8, r4 - sthi.q r0, -1, r4 - mcmpeq.b r5, r63, r6 - beqi/l r6, 0, tr0 // loop - - add r5, r63, r4 - addi r0, 8, r0 - blink tr1, r63 // shortstring - - .size strcpy,.-strcpy diff --git a/arch/sh/lib64/strlen.S b/arch/sh/lib64/strlen.S deleted file mode 100644 index c00b972f9999..000000000000 --- a/arch/sh/lib64/strlen.S +++ /dev/null @@ -1,34 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Simplistic strlen() implementation for SHmedia. - * - * Copyright (C) 2003 Paul Mundt - */ - - .section .text..SHmedia32,"ax" - .globl strlen - .type strlen,@function - - .balign 16 -strlen: - ptabs r18, tr4 - - /* - * Note: We could easily deal with the NULL case here with a simple - * sanity check, though it seems that the behavior we want is to fault - * in the event that r2 == NULL, so we don't bother. - */ -/* beqi r2, 0, tr4 */ ! Sanity check - - movi -1, r0 - pta/l loop, tr0 -loop: - ld.b r2, 0, r1 - addi r2, 1, r2 - addi r0, 1, r0 - bnei/l r1, 0, tr0 - - or r0, r63, r2 - blink tr4, r63 - - .size strlen,.-strlen diff --git a/arch/sh/lib64/udelay.c b/arch/sh/lib64/udelay.c deleted file mode 100644 index f215b063da70..000000000000 --- a/arch/sh/lib64/udelay.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * arch/sh/lib64/udelay.c - * - * Delay routines, using a pre-computed "loops_per_jiffy" value. - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003, 2004 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include - -/* - * Use only for very small delays (< 1 msec). - * - * The active part of our cycle counter is only 32-bits wide, and - * we're treating the difference between two marks as signed. On - * a 1GHz box, that's about 2 seconds. - */ - -void __delay(unsigned long loops) -{ - long long dummy; - __asm__ __volatile__("gettr tr0, %1\n\t" - "pta $+4, tr0\n\t" - "addi %0, -1, %0\n\t" - "bne %0, r63, tr0\n\t" - "ptabs %1, tr0\n\t":"=r"(loops), - "=r"(dummy) - :"0"(loops)); -} - -void __const_udelay(unsigned long xloops) -{ - __delay(xloops * (HZ * cpu_data[raw_smp_processor_id()].loops_per_jiffy)); -} - -void __udelay(unsigned long usecs) -{ - __const_udelay(usecs * 0x000010c6); /* 2**32 / 1000000 */ -} - -void __ndelay(unsigned long nsecs) -{ - __const_udelay(nsecs * 0x00000005); -} diff --git a/arch/sh/lib64/udivdi3.S b/arch/sh/lib64/udivdi3.S deleted file mode 100644 index c032cb157589..000000000000 --- a/arch/sh/lib64/udivdi3.S +++ /dev/null @@ -1,121 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - .section .text..SHmedia32,"ax" - .align 2 - .global __udivdi3 -__udivdi3: - shlri r3,1,r4 - nsb r4,r22 - shlld r3,r22,r6 - shlri r6,49,r5 - movi 0xffffffffffffbaf1,r21 /* .l shift count 17. */ - sub r21,r5,r1 - mmulfx.w r1,r1,r4 - mshflo.w r1,r63,r1 - sub r63,r22,r20 // r63 == 64 % 64 - mmulfx.w r5,r4,r4 - pta large_divisor,tr0 - addi r20,32,r9 - msub.w r1,r4,r1 - madd.w r1,r1,r1 - mmulfx.w r1,r1,r4 - shlri r6,32,r7 - bgt/u r9,r63,tr0 // large_divisor - mmulfx.w r5,r4,r4 - shlri r2,32+14,r19 - addi r22,-31,r0 - msub.w r1,r4,r1 - - mulu.l r1,r7,r4 - addi r1,-3,r5 - mulu.l r5,r19,r5 - sub r63,r4,r4 // Negate to make sure r1 ends up <= 1/r2 - shlri r4,2,r4 /* chop off leading %0000000000000000 001.00000000000 - or, as - the case may be, %0000000000000000 000.11111111111, still */ - muls.l r1,r4,r4 /* leaving at least one sign bit. */ - mulu.l r5,r3,r8 - mshalds.l r1,r21,r1 - shari r4,26,r4 - shlld r8,r0,r8 - add r1,r4,r1 // 31 bit unsigned reciprocal now in r1 (msb equiv. 0.5) - sub r2,r8,r2 - /* Can do second step of 64 : 32 div now, using r1 and the rest in r2. */ - - shlri r2,22,r21 - mulu.l r21,r1,r21 - shlld r5,r0,r8 - addi r20,30-22,r0 - shlrd r21,r0,r21 - mulu.l r21,r3,r5 - add r8,r21,r8 - mcmpgt.l r21,r63,r21 // See Note 1 - addi r20,30,r0 - mshfhi.l r63,r21,r21 - sub r2,r5,r2 - andc r2,r21,r2 - - /* small divisor: need a third divide step */ - mulu.l r2,r1,r7 - ptabs r18,tr0 - addi r2,1,r2 - shlrd r7,r0,r7 - mulu.l r7,r3,r5 - add r8,r7,r8 - sub r2,r3,r2 - cmpgt r2,r5,r5 - add r8,r5,r2 - /* could test r3 here to check for divide by zero. */ - blink tr0,r63 - -large_divisor: - mmulfx.w r5,r4,r4 - shlrd r2,r9,r25 - shlri r25,32,r8 - msub.w r1,r4,r1 - - mulu.l r1,r7,r4 - addi r1,-3,r5 - mulu.l r5,r8,r5 - sub r63,r4,r4 // Negate to make sure r1 ends up <= 1/r2 - shlri r4,2,r4 /* chop off leading %0000000000000000 001.00000000000 - or, as - the case may be, %0000000000000000 000.11111111111, still */ - muls.l r1,r4,r4 /* leaving at least one sign bit. */ - shlri r5,14-1,r8 - mulu.l r8,r7,r5 - mshalds.l r1,r21,r1 - shari r4,26,r4 - add r1,r4,r1 // 31 bit unsigned reciprocal now in r1 (msb equiv. 0.5) - sub r25,r5,r25 - /* Can do second step of 64 : 32 div now, using r1 and the rest in r25. */ - - shlri r25,22,r21 - mulu.l r21,r1,r21 - pta no_lo_adj,tr0 - addi r22,32,r0 - shlri r21,40,r21 - mulu.l r21,r7,r5 - add r8,r21,r8 - shlld r2,r0,r2 - sub r25,r5,r25 - bgtu/u r7,r25,tr0 // no_lo_adj - addi r8,1,r8 - sub r25,r7,r25 -no_lo_adj: - mextr4 r2,r25,r2 - - /* large_divisor: only needs a few adjustments. */ - mulu.l r8,r6,r5 - ptabs r18,tr0 - /* bubble */ - cmpgtu r5,r2,r5 - sub r8,r5,r2 - blink tr0,r63 - -/* Note 1: To shift the result of the second divide stage so that the result - always fits into 32 bits, yet we still reduce the rest sufficiently - would require a lot of instructions to do the shifts just right. Using - the full 64 bit shift result to multiply with the divisor would require - four extra instructions for the upper 32 bits (shift / mulu / shift / sub). - Fortunately, if the upper 32 bits of the shift result are nonzero, we - know that the rest after taking this partial result into account will - fit into 32 bits. So we just clear the upper 32 bits of the rest if the - upper 32 bits of the partial result are nonzero. */ diff --git a/arch/sh/lib64/udivsi3.S b/arch/sh/lib64/udivsi3.S deleted file mode 100644 index e4788fb4fe82..000000000000 --- a/arch/sh/lib64/udivsi3.S +++ /dev/null @@ -1,60 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - .global __udivsi3 - .section .text..SHmedia32,"ax" - .align 2 - -/* - inputs: r4,r5 - clobbered: r18,r19,r20,r21,r22,r25,tr0 - result in r0. - */ -__udivsi3: - addz.l r5,r63,r22 - nsb r22,r0 - shlld r22,r0,r25 - shlri r25,48,r25 - movi 0xffffffffffffbb0c,r20 /* shift count eqiv 76 */ - sub r20,r25,r21 - mmulfx.w r21,r21,r19 - mshflo.w r21,r63,r21 - ptabs r18,tr0 - mmulfx.w r25,r19,r19 - sub r20,r0,r0 - /* bubble */ - msub.w r21,r19,r19 - - /* - * It would be nice for scheduling to do this add to r21 before - * the msub.w, but we need a different value for r19 to keep - * errors under control. - */ - addi r19,-2,r21 - mulu.l r4,r21,r18 - mmulfx.w r19,r19,r19 - shlli r21,15,r21 - shlrd r18,r0,r18 - mulu.l r18,r22,r20 - mmacnfx.wl r25,r19,r21 - /* bubble */ - sub r4,r20,r25 - - mulu.l r25,r21,r19 - addi r0,14,r0 - /* bubble */ - shlrd r19,r0,r19 - mulu.l r19,r22,r20 - add r18,r19,r18 - /* bubble */ - sub.l r25,r20,r25 - - mulu.l r25,r21,r19 - addz.l r25,r63,r25 - sub r25,r22,r25 - shlrd r19,r0,r19 - mulu.l r19,r22,r20 - addi r25,1,r25 - add r18,r19,r18 - - cmpgt r25,r20,r25 - add.l r18,r25,r0 - blink tr0,r63 diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 5c8a2ebfc720..6c39d24ad919 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -15,8 +15,7 @@ config MMU config PAGE_OFFSET hex - default "0x80000000" if MMU && SUPERH32 - default "0x20000000" if MMU && SUPERH64 + default "0x80000000" if MMU default "0x00000000" config FORCE_MAX_ZONEORDER @@ -72,12 +71,11 @@ config MEMORY_SIZE config 29BIT def_bool !32BIT - depends on SUPERH32 select UNCACHED_MAPPING config 32BIT bool - default y if CPU_SH5 || !MMU + default !MMU config PMB bool "Support 32-bit physical addressing through PMB" @@ -152,7 +150,7 @@ config ARCH_MEMORY_PROBE config IOREMAP_FIXED def_bool y - depends on X2TLB || SUPERH64 + depends on X2TLB config UNCACHED_MAPPING bool @@ -184,7 +182,7 @@ config PAGE_SIZE_16KB config PAGE_SIZE_64KB bool "64kB" - depends on !MMU || CPU_SH4 || CPU_SH5 + depends on !MMU || CPU_SH4 help This enables support for 64kB pages, possible on all SH-4 CPUs and later. @@ -216,10 +214,6 @@ config HUGETLB_PAGE_SIZE_64MB bool "64MB" depends on X2TLB -config HUGETLB_PAGE_SIZE_512MB - bool "512MB" - depends on CPU_SH5 - endchoice config SCHED_MC @@ -242,7 +236,7 @@ config SH7705_CACHE_32KB choice prompt "Cache mode" - default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5 + default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4 default CACHE_WRITETHROUGH if (CPU_SH2 && !CPU_SH2A) config CACHE_WRITEBACK diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile index 5051b38fd5b6..487da0ff03b3 100644 --- a/arch/sh/mm/Makefile +++ b/arch/sh/mm/Makefile @@ -10,15 +10,14 @@ cacheops-$(CONFIG_CPU_SUBTYPE_SH7619) := cache-sh2.o cacheops-$(CONFIG_CPU_SH2A) := cache-sh2a.o cacheops-$(CONFIG_CPU_SH3) := cache-sh3.o cacheops-$(CONFIG_CPU_SH4) := cache-sh4.o flush-sh4.o -cacheops-$(CONFIG_CPU_SH5) := cache-sh5.o flush-sh4.o cacheops-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o cacheops-$(CONFIG_CPU_SHX3) += cache-shx3.o obj-y += $(cacheops-y) mmu-y := nommu.o extable_32.o -mmu-$(CONFIG_MMU) := extable_$(BITS).o fault.o ioremap.o kmap.o \ - pgtable.o tlbex_$(BITS).o tlbflush_$(BITS).o +mmu-$(CONFIG_MMU) := extable_32.o fault.o ioremap.o kmap.o \ + pgtable.o tlbex_32.o tlbflush_32.o obj-y += $(mmu-y) @@ -31,7 +30,6 @@ ifdef CONFIG_MMU debugfs-$(CONFIG_CPU_SH4) += tlb-debugfs.o tlb-$(CONFIG_CPU_SH3) := tlb-sh3.o tlb-$(CONFIG_CPU_SH4) := tlb-sh4.o tlb-urb.o -tlb-$(CONFIG_CPU_SH5) := tlb-sh5.o tlb-$(CONFIG_CPU_HAS_PTEAEX) := tlb-pteaex.o tlb-urb.o obj-y += $(tlb-y) endif @@ -46,29 +44,4 @@ obj-$(CONFIG_HAVE_SRAM_POOL) += sram.o GCOV_PROFILE_pmb.o := n -# Special flags for tlbex_64.o. This puts restrictions on the number of -# caller-save registers that the compiler can target when building this file. -# This is required because the code is called from a context in entry.S where -# very few registers have been saved in the exception handler (for speed -# reasons). -# The caller save registers that have been saved and which can be used are -# r2,r3,r4,r5 : argument passing -# r15, r18 : SP and LINK -# tr0-4 : allow all caller-save TR's. The compiler seems to be able to make -# use of them, so it's probably beneficial to performance to save them -# and have them available for it. -# -# The resources not listed below are callee save, i.e. the compiler is free to -# use any of them and will spill them to the stack itself. - -CFLAGS_tlbex_64.o += -ffixed-r7 \ - -ffixed-r8 -ffixed-r9 -ffixed-r10 -ffixed-r11 -ffixed-r12 \ - -ffixed-r13 -ffixed-r14 -ffixed-r16 -ffixed-r17 -ffixed-r19 \ - -ffixed-r20 -ffixed-r21 -ffixed-r22 -ffixed-r23 \ - -ffixed-r24 -ffixed-r25 -ffixed-r26 -ffixed-r27 \ - -ffixed-r36 -ffixed-r37 -ffixed-r38 -ffixed-r39 -ffixed-r40 \ - -ffixed-r41 -ffixed-r42 -ffixed-r43 \ - -ffixed-r60 -ffixed-r61 -ffixed-r62 \ - -fomit-frame-pointer - ccflags-y := -Werror diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c deleted file mode 100644 index 445b5e69b73c..000000000000 --- a/arch/sh/mm/cache-sh5.c +++ /dev/null @@ -1,621 +0,0 @@ -/* - * arch/sh/mm/cache-sh5.c - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2002 Benedict Gaster - * Copyright (C) 2003 Richard Curnow - * Copyright (C) 2003 - 2008 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -extern void __weak sh4__flush_region_init(void); - -/* Wired TLB entry for the D-cache */ -static unsigned long long dtlb_cache_slot; - -/* - * The following group of functions deal with mapping and unmapping a - * temporary page into a DTLB slot that has been set aside for exclusive - * use. - */ -static inline void -sh64_setup_dtlb_cache_slot(unsigned long eaddr, unsigned long asid, - unsigned long paddr) -{ - local_irq_disable(); - sh64_setup_tlb_slot(dtlb_cache_slot, eaddr, asid, paddr); -} - -static inline void sh64_teardown_dtlb_cache_slot(void) -{ - sh64_teardown_tlb_slot(dtlb_cache_slot); - local_irq_enable(); -} - -static inline void sh64_icache_inv_all(void) -{ - unsigned long long addr, flag, data; - unsigned long flags; - - addr = ICCR0; - flag = ICCR0_ICI; - data = 0; - - /* Make this a critical section for safety (probably not strictly necessary.) */ - local_irq_save(flags); - - /* Without %1 it gets unexplicably wrong */ - __asm__ __volatile__ ( - "getcfg %3, 0, %0\n\t" - "or %0, %2, %0\n\t" - "putcfg %3, 0, %0\n\t" - "synci" - : "=&r" (data) - : "0" (data), "r" (flag), "r" (addr)); - - local_irq_restore(flags); -} - -static void sh64_icache_inv_kernel_range(unsigned long start, unsigned long end) -{ - /* Invalidate range of addresses [start,end] from the I-cache, where - * the addresses lie in the kernel superpage. */ - - unsigned long long ullend, addr, aligned_start; - aligned_start = (unsigned long long)(signed long long)(signed long) start; - addr = L1_CACHE_ALIGN(aligned_start); - ullend = (unsigned long long) (signed long long) (signed long) end; - - while (addr <= ullend) { - __asm__ __volatile__ ("icbi %0, 0" : : "r" (addr)); - addr += L1_CACHE_BYTES; - } -} - -static void sh64_icache_inv_user_page(struct vm_area_struct *vma, unsigned long eaddr) -{ - /* If we get called, we know that vma->vm_flags contains VM_EXEC. - Also, eaddr is page-aligned. */ - unsigned int cpu = smp_processor_id(); - unsigned long long addr, end_addr; - unsigned long flags = 0; - unsigned long running_asid, vma_asid; - addr = eaddr; - end_addr = addr + PAGE_SIZE; - - /* Check whether we can use the current ASID for the I-cache - invalidation. For example, if we're called via - access_process_vm->flush_cache_page->here, (e.g. when reading from - /proc), 'running_asid' will be that of the reader, not of the - victim. - - Also, note the risk that we might get pre-empted between the ASID - compare and blocking IRQs, and before we regain control, the - pid->ASID mapping changes. However, the whole cache will get - invalidated when the mapping is renewed, so the worst that can - happen is that the loop below ends up invalidating somebody else's - cache entries. - */ - - running_asid = get_asid(); - vma_asid = cpu_asid(cpu, vma->vm_mm); - if (running_asid != vma_asid) { - local_irq_save(flags); - switch_and_save_asid(vma_asid); - } - while (addr < end_addr) { - /* Worth unrolling a little */ - __asm__ __volatile__("icbi %0, 0" : : "r" (addr)); - __asm__ __volatile__("icbi %0, 32" : : "r" (addr)); - __asm__ __volatile__("icbi %0, 64" : : "r" (addr)); - __asm__ __volatile__("icbi %0, 96" : : "r" (addr)); - addr += 128; - } - if (running_asid != vma_asid) { - switch_and_save_asid(running_asid); - local_irq_restore(flags); - } -} - -static void sh64_icache_inv_user_page_range(struct mm_struct *mm, - unsigned long start, unsigned long end) -{ - /* Used for invalidating big chunks of I-cache, i.e. assume the range - is whole pages. If 'start' or 'end' is not page aligned, the code - is conservative and invalidates to the ends of the enclosing pages. - This is functionally OK, just a performance loss. */ - - /* See the comments below in sh64_dcache_purge_user_range() regarding - the choice of algorithm. However, for the I-cache option (2) isn't - available because there are no physical tags so aliases can't be - resolved. The icbi instruction has to be used through the user - mapping. Because icbi is cheaper than ocbp on a cache hit, it - would be cheaper to use the selective code for a large range than is - possible with the D-cache. Just assume 64 for now as a working - figure. - */ - int n_pages; - - if (!mm) - return; - - n_pages = ((end - start) >> PAGE_SHIFT); - if (n_pages >= 64) { - sh64_icache_inv_all(); - } else { - unsigned long aligned_start; - unsigned long eaddr; - unsigned long after_last_page_start; - unsigned long mm_asid, current_asid; - unsigned long flags = 0; - - mm_asid = cpu_asid(smp_processor_id(), mm); - current_asid = get_asid(); - - if (mm_asid != current_asid) { - /* Switch ASID and run the invalidate loop under cli */ - local_irq_save(flags); - switch_and_save_asid(mm_asid); - } - - aligned_start = start & PAGE_MASK; - after_last_page_start = PAGE_SIZE + ((end - 1) & PAGE_MASK); - - while (aligned_start < after_last_page_start) { - struct vm_area_struct *vma; - unsigned long vma_end; - vma = find_vma(mm, aligned_start); - if (!vma || (aligned_start <= vma->vm_end)) { - /* Avoid getting stuck in an error condition */ - aligned_start += PAGE_SIZE; - continue; - } - vma_end = vma->vm_end; - if (vma->vm_flags & VM_EXEC) { - /* Executable */ - eaddr = aligned_start; - while (eaddr < vma_end) { - sh64_icache_inv_user_page(vma, eaddr); - eaddr += PAGE_SIZE; - } - } - aligned_start = vma->vm_end; /* Skip to start of next region */ - } - - if (mm_asid != current_asid) { - switch_and_save_asid(current_asid); - local_irq_restore(flags); - } - } -} - -static void sh64_icache_inv_current_user_range(unsigned long start, unsigned long end) -{ - /* The icbi instruction never raises ITLBMISS. i.e. if there's not a - cache hit on the virtual tag the instruction ends there, without a - TLB lookup. */ - - unsigned long long aligned_start; - unsigned long long ull_end; - unsigned long long addr; - - ull_end = end; - - /* Just invalidate over the range using the natural addresses. TLB - miss handling will be OK (TBC). Since it's for the current process, - either we're already in the right ASID context, or the ASIDs have - been recycled since we were last active in which case we might just - invalidate another processes I-cache entries : no worries, just a - performance drop for him. */ - aligned_start = L1_CACHE_ALIGN(start); - addr = aligned_start; - while (addr < ull_end) { - __asm__ __volatile__ ("icbi %0, 0" : : "r" (addr)); - __asm__ __volatile__ ("nop"); - __asm__ __volatile__ ("nop"); - addr += L1_CACHE_BYTES; - } -} - -/* Buffer used as the target of alloco instructions to purge data from cache - sets by natural eviction. -- RPC */ -#define DUMMY_ALLOCO_AREA_SIZE ((L1_CACHE_BYTES << 10) + (1024 * 4)) -static unsigned char dummy_alloco_area[DUMMY_ALLOCO_AREA_SIZE] __cacheline_aligned = { 0, }; - -static inline void sh64_dcache_purge_sets(int sets_to_purge_base, int n_sets) -{ - /* Purge all ways in a particular block of sets, specified by the base - set number and number of sets. Can handle wrap-around, if that's - needed. */ - - int dummy_buffer_base_set; - unsigned long long eaddr, eaddr0, eaddr1; - int j; - int set_offset; - - dummy_buffer_base_set = ((int)&dummy_alloco_area & - cpu_data->dcache.entry_mask) >> - cpu_data->dcache.entry_shift; - set_offset = sets_to_purge_base - dummy_buffer_base_set; - - for (j = 0; j < n_sets; j++, set_offset++) { - set_offset &= (cpu_data->dcache.sets - 1); - eaddr0 = (unsigned long long)dummy_alloco_area + - (set_offset << cpu_data->dcache.entry_shift); - - /* - * Do one alloco which hits the required set per cache - * way. For write-back mode, this will purge the #ways - * resident lines. There's little point unrolling this - * loop because the allocos stall more if they're too - * close together. - */ - eaddr1 = eaddr0 + cpu_data->dcache.way_size * - cpu_data->dcache.ways; - - for (eaddr = eaddr0; eaddr < eaddr1; - eaddr += cpu_data->dcache.way_size) { - __asm__ __volatile__ ("alloco %0, 0" : : "r" (eaddr)); - __asm__ __volatile__ ("synco"); /* TAKum03020 */ - } - - eaddr1 = eaddr0 + cpu_data->dcache.way_size * - cpu_data->dcache.ways; - - for (eaddr = eaddr0; eaddr < eaddr1; - eaddr += cpu_data->dcache.way_size) { - /* - * Load from each address. Required because - * alloco is a NOP if the cache is write-through. - */ - if (test_bit(SH_CACHE_MODE_WT, &(cpu_data->dcache.flags))) - __raw_readb((unsigned long)eaddr); - } - } - - /* - * Don't use OCBI to invalidate the lines. That costs cycles - * directly. If the dummy block is just left resident, it will - * naturally get evicted as required. - */ -} - -/* - * Purge the entire contents of the dcache. The most efficient way to - * achieve this is to use alloco instructions on a region of unused - * memory equal in size to the cache, thereby causing the current - * contents to be discarded by natural eviction. The alternative, namely - * reading every tag, setting up a mapping for the corresponding page and - * doing an OCBP for the line, would be much more expensive. - */ -static void sh64_dcache_purge_all(void) -{ - - sh64_dcache_purge_sets(0, cpu_data->dcache.sets); -} - - -/* Assumes this address (+ (2**n_synbits) pages up from it) aren't used for - anything else in the kernel */ -#define MAGIC_PAGE0_START 0xffffffffec000000ULL - -/* Purge the physical page 'paddr' from the cache. It's known that any - * cache lines requiring attention have the same page colour as the the - * address 'eaddr'. - * - * This relies on the fact that the D-cache matches on physical tags when - * no virtual tag matches. So we create an alias for the original page - * and purge through that. (Alternatively, we could have done this by - * switching ASID to match the original mapping and purged through that, - * but that involves ASID switching cost + probably a TLBMISS + refill - * anyway.) - */ -static void sh64_dcache_purge_coloured_phy_page(unsigned long paddr, - unsigned long eaddr) -{ - unsigned long long magic_page_start; - unsigned long long magic_eaddr, magic_eaddr_end; - - magic_page_start = MAGIC_PAGE0_START + (eaddr & CACHE_OC_SYN_MASK); - - /* As long as the kernel is not pre-emptible, this doesn't need to be - under cli/sti. */ - sh64_setup_dtlb_cache_slot(magic_page_start, get_asid(), paddr); - - magic_eaddr = magic_page_start; - magic_eaddr_end = magic_eaddr + PAGE_SIZE; - - while (magic_eaddr < magic_eaddr_end) { - /* Little point in unrolling this loop - the OCBPs are blocking - and won't go any quicker (i.e. the loop overhead is parallel - to part of the OCBP execution.) */ - __asm__ __volatile__ ("ocbp %0, 0" : : "r" (magic_eaddr)); - magic_eaddr += L1_CACHE_BYTES; - } - - sh64_teardown_dtlb_cache_slot(); -} - -/* - * Purge a page given its physical start address, by creating a temporary - * 1 page mapping and purging across that. Even if we know the virtual - * address (& vma or mm) of the page, the method here is more elegant - * because it avoids issues of coping with page faults on the purge - * instructions (i.e. no special-case code required in the critical path - * in the TLB miss handling). - */ -static void sh64_dcache_purge_phy_page(unsigned long paddr) -{ - unsigned long long eaddr_start, eaddr, eaddr_end; - int i; - - /* As long as the kernel is not pre-emptible, this doesn't need to be - under cli/sti. */ - eaddr_start = MAGIC_PAGE0_START; - for (i = 0; i < (1 << CACHE_OC_N_SYNBITS); i++) { - sh64_setup_dtlb_cache_slot(eaddr_start, get_asid(), paddr); - - eaddr = eaddr_start; - eaddr_end = eaddr + PAGE_SIZE; - while (eaddr < eaddr_end) { - __asm__ __volatile__ ("ocbp %0, 0" : : "r" (eaddr)); - eaddr += L1_CACHE_BYTES; - } - - sh64_teardown_dtlb_cache_slot(); - eaddr_start += PAGE_SIZE; - } -} - -static void sh64_dcache_purge_user_pages(struct mm_struct *mm, - unsigned long addr, unsigned long end) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - pte_t entry; - spinlock_t *ptl; - unsigned long paddr; - - if (!mm) - return; /* No way to find physical address of page */ - - pgd = pgd_offset(mm, addr); - if (pgd_bad(*pgd)) - return; - - pud = pud_offset(pgd, addr); - if (pud_none(*pud) || pud_bad(*pud)) - return; - - pmd = pmd_offset(pud, addr); - if (pmd_none(*pmd) || pmd_bad(*pmd)) - return; - - pte = pte_offset_map_lock(mm, pmd, addr, &ptl); - do { - entry = *pte; - if (pte_none(entry) || !pte_present(entry)) - continue; - paddr = pte_val(entry) & PAGE_MASK; - sh64_dcache_purge_coloured_phy_page(paddr, addr); - } while (pte++, addr += PAGE_SIZE, addr != end); - pte_unmap_unlock(pte - 1, ptl); -} - -/* - * There are at least 5 choices for the implementation of this, with - * pros (+), cons(-), comments(*): - * - * 1. ocbp each line in the range through the original user's ASID - * + no lines spuriously evicted - * - tlbmiss handling (must either handle faults on demand => extra - * special-case code in tlbmiss critical path), or map the page in - * advance (=> flush_tlb_range in advance to avoid multiple hits) - * - ASID switching - * - expensive for large ranges - * - * 2. temporarily map each page in the range to a special effective - * address and ocbp through the temporary mapping; relies on the - * fact that SH-5 OCB* always do TLB lookup and match on ptags (they - * never look at the etags) - * + no spurious evictions - * - expensive for large ranges - * * surely cheaper than (1) - * - * 3. walk all the lines in the cache, check the tags, if a match - * occurs create a page mapping to ocbp the line through - * + no spurious evictions - * - tag inspection overhead - * - (especially for small ranges) - * - potential cost of setting up/tearing down page mapping for - * every line that matches the range - * * cost partly independent of range size - * - * 4. walk all the lines in the cache, check the tags, if a match - * occurs use 4 * alloco to purge the line (+3 other probably - * innocent victims) by natural eviction - * + no tlb mapping overheads - * - spurious evictions - * - tag inspection overhead - * - * 5. implement like flush_cache_all - * + no tag inspection overhead - * - spurious evictions - * - bad for small ranges - * - * (1) can be ruled out as more expensive than (2). (2) appears best - * for small ranges. The choice between (3), (4) and (5) for large - * ranges and the range size for the large/small boundary need - * benchmarking to determine. - * - * For now use approach (2) for small ranges and (5) for large ones. - */ -static void sh64_dcache_purge_user_range(struct mm_struct *mm, - unsigned long start, unsigned long end) -{ - int n_pages = ((end - start) >> PAGE_SHIFT); - - if (n_pages >= 64 || ((start ^ (end - 1)) & PMD_MASK)) { - sh64_dcache_purge_all(); - } else { - /* Small range, covered by a single page table page */ - start &= PAGE_MASK; /* should already be so */ - end = PAGE_ALIGN(end); /* should already be so */ - sh64_dcache_purge_user_pages(mm, start, end); - } -} - -/* - * Invalidate the entire contents of both caches, after writing back to - * memory any dirty data from the D-cache. - */ -static void sh5_flush_cache_all(void *unused) -{ - sh64_dcache_purge_all(); - sh64_icache_inv_all(); -} - -/* - * Invalidate an entire user-address space from both caches, after - * writing back dirty data (e.g. for shared mmap etc). - * - * This could be coded selectively by inspecting all the tags then - * doing 4*alloco on any set containing a match (as for - * flush_cache_range), but fork/exit/execve (where this is called from) - * are expensive anyway. - * - * Have to do a purge here, despite the comments re I-cache below. - * There could be odd-coloured dirty data associated with the mm still - * in the cache - if this gets written out through natural eviction - * after the kernel has reused the page there will be chaos. - * - * The mm being torn down won't ever be active again, so any Icache - * lines tagged with its ASID won't be visible for the rest of the - * lifetime of this ASID cycle. Before the ASID gets reused, there - * will be a flush_cache_all. Hence we don't need to touch the - * I-cache. This is similar to the lack of action needed in - * flush_tlb_mm - see fault.c. - */ -static void sh5_flush_cache_mm(void *unused) -{ - sh64_dcache_purge_all(); -} - -/* - * Invalidate (from both caches) the range [start,end) of virtual - * addresses from the user address space specified by mm, after writing - * back any dirty data. - * - * Note, 'end' is 1 byte beyond the end of the range to flush. - */ -static void sh5_flush_cache_range(void *args) -{ - struct flusher_data *data = args; - struct vm_area_struct *vma; - unsigned long start, end; - - vma = data->vma; - start = data->addr1; - end = data->addr2; - - sh64_dcache_purge_user_range(vma->vm_mm, start, end); - sh64_icache_inv_user_page_range(vma->vm_mm, start, end); -} - -/* - * Invalidate any entries in either cache for the vma within the user - * address space vma->vm_mm for the page starting at virtual address - * 'eaddr'. This seems to be used primarily in breaking COW. Note, - * the I-cache must be searched too in case the page in question is - * both writable and being executed from (e.g. stack trampolines.) - * - * Note, this is called with pte lock held. - */ -static void sh5_flush_cache_page(void *args) -{ - struct flusher_data *data = args; - struct vm_area_struct *vma; - unsigned long eaddr, pfn; - - vma = data->vma; - eaddr = data->addr1; - pfn = data->addr2; - - sh64_dcache_purge_phy_page(pfn << PAGE_SHIFT); - - if (vma->vm_flags & VM_EXEC) - sh64_icache_inv_user_page(vma, eaddr); -} - -static void sh5_flush_dcache_page(void *page) -{ - sh64_dcache_purge_phy_page(page_to_phys((struct page *)page)); - wmb(); -} - -/* - * Flush the range [start,end] of kernel virtual address space from - * the I-cache. The corresponding range must be purged from the - * D-cache also because the SH-5 doesn't have cache snooping between - * the caches. The addresses will be visible through the superpage - * mapping, therefore it's guaranteed that there no cache entries for - * the range in cache sets of the wrong colour. - */ -static void sh5_flush_icache_range(void *args) -{ - struct flusher_data *data = args; - unsigned long start, end; - - start = data->addr1; - end = data->addr2; - - __flush_purge_region((void *)start, end); - wmb(); - sh64_icache_inv_kernel_range(start, end); -} - -/* - * For the address range [start,end), write back the data from the - * D-cache and invalidate the corresponding region of the I-cache for the - * current process. Used to flush signal trampolines on the stack to - * make them executable. - */ -static void sh5_flush_cache_sigtramp(void *vaddr) -{ - unsigned long end = (unsigned long)vaddr + L1_CACHE_BYTES; - - __flush_wback_region(vaddr, L1_CACHE_BYTES); - wmb(); - sh64_icache_inv_current_user_range((unsigned long)vaddr, end); -} - -void __init sh5_cache_init(void) -{ - local_flush_cache_all = sh5_flush_cache_all; - local_flush_cache_mm = sh5_flush_cache_mm; - local_flush_cache_dup_mm = sh5_flush_cache_mm; - local_flush_cache_page = sh5_flush_cache_page; - local_flush_cache_range = sh5_flush_cache_range; - local_flush_dcache_page = sh5_flush_dcache_page; - local_flush_icache_range = sh5_flush_icache_range; - local_flush_cache_sigtramp = sh5_flush_cache_sigtramp; - - /* Reserve a slot for dcache colouring in the DTLB */ - dtlb_cache_slot = sh64_get_wired_dtlb_entry(); - - sh4__flush_region_init(); -} diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c index 464f160a9576..3aef78ceb820 100644 --- a/arch/sh/mm/cache.c +++ b/arch/sh/mm/cache.c @@ -355,12 +355,6 @@ void __init cpu_cache_init(void) } } - if (boot_cpu_data.family == CPU_FAMILY_SH5) { - extern void __weak sh5_cache_init(void); - - sh5_cache_init(); - } - skip: emit_cache_params(); } diff --git a/arch/sh/mm/extable_64.c b/arch/sh/mm/extable_64.c deleted file mode 100644 index 7a3b4d33d2e7..000000000000 --- a/arch/sh/mm/extable_64.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * arch/sh/mm/extable_64.c - * - * Copyright (C) 2003 Richard Curnow - * Copyright (C) 2003, 2004 Paul Mundt - * - * Cloned from the 2.5 SH version.. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include - -extern unsigned long copy_user_memcpy, copy_user_memcpy_end; -extern void __copy_user_fixup(void); - -static const struct exception_table_entry __copy_user_fixup_ex = { - .fixup = (unsigned long)&__copy_user_fixup, -}; - -/* - * Some functions that may trap due to a bad user-mode address have too - * many loads and stores in them to make it at all practical to label - * each one and put them all in the main exception table. - * - * In particular, the fast memcpy routine is like this. It's fix-up is - * just to fall back to a slow byte-at-a-time copy, which is handled the - * conventional way. So it's functionally OK to just handle any trap - * occurring in the fast memcpy with that fixup. - */ -static const struct exception_table_entry *check_exception_ranges(unsigned long addr) -{ - if ((addr >= (unsigned long)©_user_memcpy) && - (addr <= (unsigned long)©_user_memcpy_end)) - return &__copy_user_fixup_ex; - - return NULL; -} - -static int cmp_ex_search(const void *key, const void *elt) -{ - const struct exception_table_entry *_elt = elt; - unsigned long _key = *(unsigned long *)key; - - /* avoid overflow */ - if (_key > _elt->insn) - return 1; - if (_key < _elt->insn) - return -1; - return 0; -} - -/* Simple binary search */ -const struct exception_table_entry * -search_extable(const struct exception_table_entry *base, - const size_t num, - unsigned long value) -{ - const struct exception_table_entry *mid; - - mid = check_exception_ranges(value); - if (mid) - return mid; - - return bsearch(&value, base, num, - sizeof(struct exception_table_entry), cmp_ex_search); -} - -int fixup_exception(struct pt_regs *regs) -{ - const struct exception_table_entry *fixup; - - fixup = search_exception_tables(regs->pc); - if (fixup) { - regs->pc = fixup->fixup; - return 1; - } - - return 0; -} diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c deleted file mode 100644 index e4bb2a8e0a69..000000000000 --- a/arch/sh/mm/tlb-sh5.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * arch/sh/mm/tlb-sh5.c - * - * Copyright (C) 2003 Paul Mundt - * Copyright (C) 2003 Richard Curnow - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include - -/** - * sh64_tlb_init - Perform initial setup for the DTLB and ITLB. - */ -int sh64_tlb_init(void) -{ - /* Assign some sane DTLB defaults */ - cpu_data->dtlb.entries = 64; - cpu_data->dtlb.step = 0x10; - - cpu_data->dtlb.first = DTLB_FIXED | cpu_data->dtlb.step; - cpu_data->dtlb.next = cpu_data->dtlb.first; - - cpu_data->dtlb.last = DTLB_FIXED | - ((cpu_data->dtlb.entries - 1) * - cpu_data->dtlb.step); - - /* And again for the ITLB */ - cpu_data->itlb.entries = 64; - cpu_data->itlb.step = 0x10; - - cpu_data->itlb.first = ITLB_FIXED | cpu_data->itlb.step; - cpu_data->itlb.next = cpu_data->itlb.first; - cpu_data->itlb.last = ITLB_FIXED | - ((cpu_data->itlb.entries - 1) * - cpu_data->itlb.step); - - return 0; -} - -/** - * sh64_next_free_dtlb_entry - Find the next available DTLB entry - */ -unsigned long long sh64_next_free_dtlb_entry(void) -{ - return cpu_data->dtlb.next; -} - -/** - * sh64_get_wired_dtlb_entry - Allocate a wired (locked-in) entry in the DTLB - */ -unsigned long long sh64_get_wired_dtlb_entry(void) -{ - unsigned long long entry = sh64_next_free_dtlb_entry(); - - cpu_data->dtlb.first += cpu_data->dtlb.step; - cpu_data->dtlb.next += cpu_data->dtlb.step; - - return entry; -} - -/** - * sh64_put_wired_dtlb_entry - Free a wired (locked-in) entry in the DTLB. - * - * @entry: Address of TLB slot. - * - * Works like a stack, last one to allocate must be first one to free. - */ -int sh64_put_wired_dtlb_entry(unsigned long long entry) -{ - __flush_tlb_slot(entry); - - /* - * We don't do any particularly useful tracking of wired entries, - * so this approach works like a stack .. last one to be allocated - * has to be the first one to be freed. - * - * We could potentially load wired entries into a list and work on - * rebalancing the list periodically (which also entails moving the - * contents of a TLB entry) .. though I have a feeling that this is - * more trouble than it's worth. - */ - - /* - * Entry must be valid .. we don't want any ITLB addresses! - */ - if (entry <= DTLB_FIXED) - return -EINVAL; - - /* - * Next, check if we're within range to be freed. (ie, must be the - * entry beneath the first 'free' entry! - */ - if (entry < (cpu_data->dtlb.first - cpu_data->dtlb.step)) - return -EINVAL; - - /* If we are, then bring this entry back into the list */ - cpu_data->dtlb.first -= cpu_data->dtlb.step; - cpu_data->dtlb.next = entry; - - return 0; -} - -/** - * sh64_setup_tlb_slot - Load up a translation in a wired slot. - * - * @config_addr: Address of TLB slot. - * @eaddr: Virtual address. - * @asid: Address Space Identifier. - * @paddr: Physical address. - * - * Load up a virtual<->physical translation for @eaddr<->@paddr in the - * pre-allocated TLB slot @config_addr (see sh64_get_wired_dtlb_entry). - */ -void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr, - unsigned long asid, unsigned long paddr) -{ - unsigned long long pteh, ptel; - - pteh = neff_sign_extend(eaddr); - pteh &= PAGE_MASK; - pteh |= (asid << PTEH_ASID_SHIFT) | PTEH_VALID; - ptel = neff_sign_extend(paddr); - ptel &= PAGE_MASK; - ptel |= (_PAGE_CACHABLE | _PAGE_READ | _PAGE_WRITE); - - asm volatile("putcfg %0, 1, %1\n\t" - "putcfg %0, 0, %2\n" - : : "r" (config_addr), "r" (ptel), "r" (pteh)); -} - -/** - * sh64_teardown_tlb_slot - Teardown a translation. - * - * @config_addr: Address of TLB slot. - * - * Teardown any existing mapping in the TLB slot @config_addr. - */ -void sh64_teardown_tlb_slot(unsigned long long config_addr) - __attribute__ ((alias("__flush_tlb_slot"))); - -static int dtlb_entry; -static unsigned long long dtlb_entries[64]; - -void tlb_wire_entry(struct vm_area_struct *vma, unsigned long addr, pte_t pte) -{ - unsigned long long entry; - unsigned long paddr, flags; - - BUG_ON(dtlb_entry == ARRAY_SIZE(dtlb_entries)); - - local_irq_save(flags); - - entry = sh64_get_wired_dtlb_entry(); - dtlb_entries[dtlb_entry++] = entry; - - paddr = pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK; - paddr &= ~PAGE_MASK; - - sh64_setup_tlb_slot(entry, addr, get_asid(), paddr); - - local_irq_restore(flags); -} - -void tlb_unwire_entry(void) -{ - unsigned long long entry; - unsigned long flags; - - BUG_ON(!dtlb_entry); - - local_irq_save(flags); - entry = dtlb_entries[dtlb_entry--]; - - sh64_teardown_tlb_slot(entry); - sh64_put_wired_dtlb_entry(entry); - - local_irq_restore(flags); -} - -void __update_tlb(struct vm_area_struct *vma, unsigned long address, pte_t pte) -{ - unsigned long long ptel; - unsigned long long pteh=0; - struct tlb_info *tlbp; - unsigned long long next; - unsigned int fault_code = get_thread_fault_code(); - - /* Get PTEL first */ - ptel = pte.pte_low; - - /* - * Set PTEH register - */ - pteh = neff_sign_extend(address & MMU_VPN_MASK); - - /* Set the ASID. */ - pteh |= get_asid() << PTEH_ASID_SHIFT; - pteh |= PTEH_VALID; - - /* Set PTEL register, set_pte has performed the sign extension */ - ptel &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ - - if (fault_code & FAULT_CODE_ITLB) - tlbp = &cpu_data->itlb; - else - tlbp = &cpu_data->dtlb; - - next = tlbp->next; - __flush_tlb_slot(next); - asm volatile ("putcfg %0,1,%2\n\n\t" - "putcfg %0,0,%1\n" - : : "r" (next), "r" (pteh), "r" (ptel) ); - - next += TLB_STEP; - if (next > tlbp->last) - next = tlbp->first; - tlbp->next = next; -} diff --git a/arch/sh/mm/tlbex_64.c b/arch/sh/mm/tlbex_64.c deleted file mode 100644 index 8ff966dd0c74..000000000000 --- a/arch/sh/mm/tlbex_64.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * The SH64 TLB miss. - * - * Original code from fault.c - * Copyright (C) 2000, 2001 Paolo Alberelli - * - * Fast PTE->TLB refill path - * Copyright (C) 2003 Richard.Curnow@superh.com - * - * IMPORTANT NOTES : - * The do_fast_page_fault function is called from a context in entry.S - * where very few registers have been saved. In particular, the code in - * this file must be compiled not to use ANY caller-save registers that - * are not part of the restricted save set. Also, it means that code in - * this file must not make calls to functions elsewhere in the kernel, or - * else the excepting context will see corruption in its caller-save - * registers. Plus, the entry.S save area is non-reentrant, so this code - * has to run with SR.BL==1, i.e. no interrupts taken inside it and panic - * on any exception. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static int handle_tlbmiss(unsigned long long protection_flags, - unsigned long address) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - pte_t entry; - - if (is_vmalloc_addr((void *)address)) { - pgd = pgd_offset_k(address); - } else { - if (unlikely(address >= TASK_SIZE || !current->mm)) - return 1; - - pgd = pgd_offset(current->mm, address); - } - - pud = pud_offset(pgd, address); - if (pud_none(*pud) || !pud_present(*pud)) - return 1; - - pmd = pmd_offset(pud, address); - if (pmd_none(*pmd) || !pmd_present(*pmd)) - return 1; - - pte = pte_offset_kernel(pmd, address); - entry = *pte; - if (pte_none(entry) || !pte_present(entry)) - return 1; - - /* - * If the page doesn't have sufficient protection bits set to - * service the kind of fault being handled, there's not much - * point doing the TLB refill. Punt the fault to the general - * handler. - */ - if ((pte_val(entry) & protection_flags) != protection_flags) - return 1; - - update_mmu_cache(NULL, address, pte); - - return 0; -} - -/* - * Put all this information into one structure so that everything is just - * arithmetic relative to a single base address. This reduces the number - * of movi/shori pairs needed just to load addresses of static data. - */ -struct expevt_lookup { - unsigned short protection_flags[8]; - unsigned char is_text_access[8]; - unsigned char is_write_access[8]; -}; - -#define PRU (1<<9) -#define PRW (1<<8) -#define PRX (1<<7) -#define PRR (1<<6) - -/* Sized as 8 rather than 4 to allow checking the PTE's PRU bit against whether - the fault happened in user mode or privileged mode. */ -static struct expevt_lookup expevt_lookup_table = { - .protection_flags = {PRX, PRX, 0, 0, PRR, PRR, PRW, PRW}, - .is_text_access = {1, 1, 0, 0, 0, 0, 0, 0} -}; - -static inline unsigned int -expevt_to_fault_code(unsigned long expevt) -{ - if (expevt == 0xa40) - return FAULT_CODE_ITLB; - else if (expevt == 0x060) - return FAULT_CODE_WRITE; - - return 0; -} - -/* - This routine handles page faults that can be serviced just by refilling a - TLB entry from an existing page table entry. (This case represents a very - large majority of page faults.) Return 1 if the fault was successfully - handled. Return 0 if the fault could not be handled. (This leads into the - general fault handling in fault.c which deals with mapping file-backed - pages, stack growth, segmentation faults, swapping etc etc) - */ -asmlinkage int __kprobes -do_fast_page_fault(unsigned long long ssr_md, unsigned long long expevt, - unsigned long address) -{ - unsigned long long protection_flags; - unsigned long long index; - unsigned long long expevt4; - unsigned int fault_code; - - /* The next few lines implement a way of hashing EXPEVT into a - * small array index which can be used to lookup parameters - * specific to the type of TLBMISS being handled. - * - * Note: - * ITLBMISS has EXPEVT==0xa40 - * RTLBMISS has EXPEVT==0x040 - * WTLBMISS has EXPEVT==0x060 - */ - expevt4 = (expevt >> 4); - /* TODO : xor ssr_md into this expression too. Then we can check - * that PRU is set when it needs to be. */ - index = expevt4 ^ (expevt4 >> 5); - index &= 7; - - fault_code = expevt_to_fault_code(expevt); - - protection_flags = expevt_lookup_table.protection_flags[index]; - - if (expevt_lookup_table.is_text_access[index]) - fault_code |= FAULT_CODE_ITLB; - if (!ssr_md) - fault_code |= FAULT_CODE_USER; - - set_thread_fault_code(fault_code); - - return handle_tlbmiss(protection_flags, address); -} diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c deleted file mode 100644 index bd0715d5dca4..000000000000 --- a/arch/sh/mm/tlbflush_64.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * arch/sh/mm/tlb-flush_64.c - * - * Copyright (C) 2000, 2001 Paolo Alberelli - * Copyright (C) 2003 Richard Curnow (/proc/tlb, bug fixes) - * Copyright (C) 2003 - 2012 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -void local_flush_tlb_one(unsigned long asid, unsigned long page) -{ - unsigned long long match, pteh=0, lpage; - unsigned long tlb; - - /* - * Sign-extend based on neff. - */ - lpage = neff_sign_extend(page); - match = (asid << PTEH_ASID_SHIFT) | PTEH_VALID; - match |= lpage; - - for_each_itlb_entry(tlb) { - asm volatile ("getcfg %1, 0, %0" - : "=r" (pteh) - : "r" (tlb) ); - - if (pteh == match) { - __flush_tlb_slot(tlb); - break; - } - } - - for_each_dtlb_entry(tlb) { - asm volatile ("getcfg %1, 0, %0" - : "=r" (pteh) - : "r" (tlb) ); - - if (pteh == match) { - __flush_tlb_slot(tlb); - break; - } - - } -} - -void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) -{ - unsigned long flags; - - if (vma->vm_mm) { - page &= PAGE_MASK; - local_irq_save(flags); - local_flush_tlb_one(get_asid(), page); - local_irq_restore(flags); - } -} - -void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, - unsigned long end) -{ - unsigned long flags; - unsigned long long match, pteh=0, pteh_epn, pteh_low; - unsigned long tlb; - unsigned int cpu = smp_processor_id(); - struct mm_struct *mm; - - mm = vma->vm_mm; - if (cpu_context(cpu, mm) == NO_CONTEXT) - return; - - local_irq_save(flags); - - start &= PAGE_MASK; - end &= PAGE_MASK; - - match = (cpu_asid(cpu, mm) << PTEH_ASID_SHIFT) | PTEH_VALID; - - /* Flush ITLB */ - for_each_itlb_entry(tlb) { - asm volatile ("getcfg %1, 0, %0" - : "=r" (pteh) - : "r" (tlb) ); - - pteh_epn = pteh & PAGE_MASK; - pteh_low = pteh & ~PAGE_MASK; - - if (pteh_low == match && pteh_epn >= start && pteh_epn <= end) - __flush_tlb_slot(tlb); - } - - /* Flush DTLB */ - for_each_dtlb_entry(tlb) { - asm volatile ("getcfg %1, 0, %0" - : "=r" (pteh) - : "r" (tlb) ); - - pteh_epn = pteh & PAGE_MASK; - pteh_low = pteh & ~PAGE_MASK; - - if (pteh_low == match && pteh_epn >= start && pteh_epn <= end) - __flush_tlb_slot(tlb); - } - - local_irq_restore(flags); -} - -void local_flush_tlb_mm(struct mm_struct *mm) -{ - unsigned long flags; - unsigned int cpu = smp_processor_id(); - - if (cpu_context(cpu, mm) == NO_CONTEXT) - return; - - local_irq_save(flags); - - cpu_context(cpu, mm) = NO_CONTEXT; - if (mm == current->mm) - activate_context(mm, cpu); - - local_irq_restore(flags); -} - -void local_flush_tlb_all(void) -{ - /* Invalidate all, including shared pages, excluding fixed TLBs */ - unsigned long flags, tlb; - - local_irq_save(flags); - - /* Flush each ITLB entry */ - for_each_itlb_entry(tlb) - __flush_tlb_slot(tlb); - - /* Flush each DTLB entry */ - for_each_dtlb_entry(tlb) - __flush_tlb_slot(tlb); - - local_irq_restore(flags); -} - -void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) -{ - /* FIXME: Optimize this later.. */ - flush_tlb_all(); -} - -void __flush_tlb_global(void) -{ - flush_tlb_all(); -} diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index ec873f09c763..527957d9c6ce 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1516,7 +1516,7 @@ config RTC_DRV_GENERIC tristate "Generic RTC support" # Please consider writing a new RTC driver instead of using the generic # RTC abstraction - depends on PARISC || M68K || PPC || SUPERH32 || COMPILE_TEST + depends on PARISC || M68K || PPC || SUPERH || COMPILE_TEST help Say Y or M here to enable RTC support on systems using the generic RTC abstraction. If you do not know what you are doing, you should diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt index 62dc4f577ba1..fb6efe5210e2 100644 --- a/fs/Kconfig.binfmt +++ b/fs/Kconfig.binfmt @@ -39,7 +39,7 @@ config ARCH_BINFMT_ELF_STATE config BINFMT_ELF_FDPIC bool "Kernel support for FDPIC ELF binaries" default y if !BINFMT_ELF - depends on (ARM || (SUPERH32 && !MMU) || C6X) + depends on (ARM || (SUPERH && !MMU) || C6X) select ELFCORE help ELF FDPIC binaries are based on ELF, but allow the individual load diff --git a/scripts/headers_install.sh b/scripts/headers_install.sh index a07668a5c36b..720f2e6b176a 100755 --- a/scripts/headers_install.sh +++ b/scripts/headers_install.sh @@ -81,9 +81,6 @@ arch/ia64/include/uapi/asm/cmpxchg.h:CONFIG_IA64_DEBUG_CMPXCHG arch/m68k/include/uapi/asm/ptrace.h:CONFIG_COLDFIRE arch/nios2/include/uapi/asm/swab.h:CONFIG_NIOS2_CI_SWAB_NO arch/nios2/include/uapi/asm/swab.h:CONFIG_NIOS2_CI_SWAB_SUPPORT -arch/sh/include/uapi/asm/ptrace.h:CONFIG_CPU_SH5 -arch/sh/include/uapi/asm/sigcontext.h:CONFIG_CPU_SH5 -arch/sh/include/uapi/asm/stat.h:CONFIG_CPU_SH5 arch/x86/include/uapi/asm/auxvec.h:CONFIG_IA32_EMULATION arch/x86/include/uapi/asm/auxvec.h:CONFIG_X86_64 arch/x86/include/uapi/asm/mman.h:CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS diff --git a/tools/arch/sh/include/asm/barrier.h b/tools/arch/sh/include/asm/barrier.h index bde5221af282..7eaea27cdd67 100644 --- a/tools/arch/sh/include/asm/barrier.h +++ b/tools/arch/sh/include/asm/barrier.h @@ -22,7 +22,7 @@ * Historically we have only done this type of barrier for the MMUCR, but * it's also necessary for the CCR, so we make it generic here instead. */ -#if defined(__SH4A__) || defined(__SH5__) +#if defined(__SH4A__) #define mb() __asm__ __volatile__ ("synco": : :"memory") #define rmb() mb() #define wmb() mb()