regulator: pfuze100: add pfuze100 regulator driver
Add pfuze100 regulator driver. Signed-off-by: Robin Gong <b38343@freescale.com> Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Robin Gong
Mark Brown
Родитель
82b736df4d
Коммит
3784b6d64d
|
|
@ -0,0 +1,113 @@
|
|||
PFUZE100 family of regulators
|
||||
|
||||
Required properties:
|
||||
- compatible: "fsl,pfuze100"
|
||||
- reg: I2C slave address
|
||||
- regulators: This is the list of child nodes that specify the regulator
|
||||
initialization data for defined regulators. Please refer to below doc
|
||||
Documentation/devicetree/bindings/regulator/regulator.txt.
|
||||
|
||||
The valid names for regulators are:
|
||||
sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
|
||||
|
||||
Each regulator is defined using the standard binding for regulators.
|
||||
|
||||
Example:
|
||||
|
||||
pmic: pfuze100@08 {
|
||||
compatible = "fsl,pfuze100";
|
||||
reg = <0x08>;
|
||||
|
||||
regulators {
|
||||
sw1a_reg: sw1ab {
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <1875000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-ramp-delay = <6250>;
|
||||
};
|
||||
|
||||
sw1c_reg: sw1c {
|
||||
regulator-min-microvolt = <300000>;
|
||||
regulator-max-microvolt = <1875000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw2_reg: sw2 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw3a_reg: sw3a {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <1975000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw3b_reg: sw3b {
|
||||
regulator-min-microvolt = <400000>;
|
||||
regulator-max-microvolt = <1975000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sw4_reg: sw4 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
swbst_reg: swbst {
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5150000>;
|
||||
};
|
||||
|
||||
snvs_reg: vsnvs {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vref_reg: vrefddr {
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen1_reg: vgen1 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1550000>;
|
||||
};
|
||||
|
||||
vgen2_reg: vgen2 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1550000>;
|
||||
};
|
||||
|
||||
vgen3_reg: vgen3 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vgen4_reg: vgen4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen5_reg: vgen5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vgen6_reg: vgen6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -355,6 +355,13 @@ config REGULATOR_PCF50633
|
|||
Say Y here to support the voltage regulators and convertors
|
||||
on PCF50633
|
||||
|
||||
config REGULATOR_PFUZE100
|
||||
tristate "Support regulators on Freescale PFUZE100 PMIC"
|
||||
depends on I2C
|
||||
help
|
||||
Say y here to support the regulators found on the Freescale PFUZE100
|
||||
PMIC.
|
||||
|
||||
config REGULATOR_RC5T583
|
||||
tristate "RICOH RC5T583 Power regulators"
|
||||
depends on MFD_RC5T583
|
||||
|
|
|
|||
|
|
@ -46,6 +46,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
|
|||
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
|
||||
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,454 @@
|
|||
/*
|
||||
* Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/regulator/pfuze100.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
#define PFUZE_NUMREGS 128
|
||||
#define PFUZE100_VOL_OFFSET 0
|
||||
#define PFUZE100_STANDBY_OFFSET 1
|
||||
#define PFUZE100_MODE_OFFSET 3
|
||||
#define PFUZE100_CONF_OFFSET 4
|
||||
|
||||
#define PFUZE100_DEVICEID 0x0
|
||||
#define PFUZE100_REVID 0x3
|
||||
#define PFUZE100_FABID 0x3
|
||||
|
||||
#define PFUZE100_SW1ABVOL 0x20
|
||||
#define PFUZE100_SW1CVOL 0x2e
|
||||
#define PFUZE100_SW2VOL 0x35
|
||||
#define PFUZE100_SW3AVOL 0x3c
|
||||
#define PFUZE100_SW3BVOL 0x43
|
||||
#define PFUZE100_SW4VOL 0x4a
|
||||
#define PFUZE100_SWBSTCON1 0x66
|
||||
#define PFUZE100_VREFDDRCON 0x6a
|
||||
#define PFUZE100_VSNVSVOL 0x6b
|
||||
#define PFUZE100_VGEN1VOL 0x6c
|
||||
#define PFUZE100_VGEN2VOL 0x6d
|
||||
#define PFUZE100_VGEN3VOL 0x6e
|
||||
#define PFUZE100_VGEN4VOL 0x6f
|
||||
#define PFUZE100_VGEN5VOL 0x70
|
||||
#define PFUZE100_VGEN6VOL 0x71
|
||||
|
||||
struct pfuze_regulator {
|
||||
struct regulator_desc desc;
|
||||
unsigned char stby_reg;
|
||||
unsigned char stby_mask;
|
||||
};
|
||||
|
||||
struct pfuze_chip {
|
||||
struct regmap *regmap;
|
||||
struct device *dev;
|
||||
struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR];
|
||||
struct regulator_dev *regulators[PFUZE100_MAX_REGULATOR];
|
||||
};
|
||||
|
||||
static const int pfuze100_swbst[] = {
|
||||
5000000, 5050000, 5100000, 5150000,
|
||||
};
|
||||
|
||||
static const int pfuze100_vsnvs[] = {
|
||||
1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000,
|
||||
};
|
||||
|
||||
static const struct i2c_device_id pfuze_device_id[] = {
|
||||
{.name = "pfuze100"},
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
|
||||
|
||||
static const struct of_device_id pfuze_dt_ids[] = {
|
||||
{ .compatible = "fsl,pfuze100" },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
|
||||
|
||||
static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
|
||||
{
|
||||
struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
|
||||
int id = rdev->desc->id;
|
||||
unsigned int val, ramp_bits, reg;
|
||||
int ret;
|
||||
|
||||
if (id < PFUZE100_SWBST) {
|
||||
if (id == PFUZE100_SW1AB)
|
||||
reg = PFUZE100_SW1ABVOL;
|
||||
else
|
||||
reg = PFUZE100_SW1CVOL + (id - PFUZE100_SW1C) * 7;
|
||||
regmap_read(pfuze100->regmap, reg, &val);
|
||||
|
||||
if (id <= PFUZE100_SW1C)
|
||||
ramp_delay = 25000 / (2 * ramp_delay);
|
||||
else if (val & 0x40)
|
||||
ramp_delay = 50000 / (4 * ramp_delay);
|
||||
else
|
||||
ramp_delay = 25000 / (2 * ramp_delay);
|
||||
|
||||
ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
|
||||
ret = regmap_update_bits(pfuze100->regmap, reg + 4 , 0xc0,
|
||||
ramp_bits << 6);
|
||||
if (ret < 0)
|
||||
dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
|
||||
} else
|
||||
ret = -EACCES;
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct regulator_ops pfuze100_ldo_regulator_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
};
|
||||
|
||||
static struct regulator_ops pfuze100_fixed_regulator_ops = {
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
};
|
||||
|
||||
static struct regulator_ops pfuze100_sw_regulator_ops = {
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
||||
.set_ramp_delay = pfuze100_set_ramp_delay,
|
||||
};
|
||||
|
||||
static struct regulator_ops pfuze100_swb_regulator_ops = {
|
||||
.list_voltage = regulator_list_voltage_table,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
|
||||
};
|
||||
|
||||
#define PFUZE100_FIXED_REG(_name, base, voltage) \
|
||||
[PFUZE100_ ## _name] = { \
|
||||
.desc = { \
|
||||
.name = #_name, \
|
||||
.n_voltages = 1, \
|
||||
.ops = &pfuze100_fixed_regulator_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.id = PFUZE100_ ## _name, \
|
||||
.owner = THIS_MODULE, \
|
||||
.min_uV = (voltage), \
|
||||
.enable_reg = (base), \
|
||||
.enable_mask = 0x10, \
|
||||
}, \
|
||||
}
|
||||
|
||||
#define PFUZE100_SW_REG(_name, base, min, max, step) \
|
||||
[PFUZE100_ ## _name] = { \
|
||||
.desc = { \
|
||||
.name = #_name,\
|
||||
.n_voltages = ((max) - (min)) / (step) + 1, \
|
||||
.ops = &pfuze100_sw_regulator_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.id = PFUZE100_ ## _name, \
|
||||
.owner = THIS_MODULE, \
|
||||
.min_uV = (min), \
|
||||
.uV_step = (step), \
|
||||
.vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
|
||||
.vsel_mask = 0x3f, \
|
||||
}, \
|
||||
.stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
|
||||
.stby_mask = 0x3f, \
|
||||
}
|
||||
|
||||
#define PFUZE100_SWB_REG(_name, base, mask, voltages) \
|
||||
[PFUZE100_ ## _name] = { \
|
||||
.desc = { \
|
||||
.name = #_name, \
|
||||
.n_voltages = ARRAY_SIZE(voltages), \
|
||||
.ops = &pfuze100_swb_regulator_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.id = PFUZE100_ ## _name, \
|
||||
.owner = THIS_MODULE, \
|
||||
.volt_table = voltages, \
|
||||
.vsel_reg = (base), \
|
||||
.vsel_mask = (mask), \
|
||||
}, \
|
||||
}
|
||||
|
||||
#define PFUZE100_VGEN_REG(_name, base, min, max, step) \
|
||||
[PFUZE100_ ## _name] = { \
|
||||
.desc = { \
|
||||
.name = #_name, \
|
||||
.n_voltages = ((max) - (min)) / (step) + 1, \
|
||||
.ops = &pfuze100_ldo_regulator_ops, \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.id = PFUZE100_ ## _name, \
|
||||
.owner = THIS_MODULE, \
|
||||
.min_uV = (min), \
|
||||
.uV_step = (step), \
|
||||
.vsel_reg = (base), \
|
||||
.vsel_mask = 0xf, \
|
||||
.enable_reg = (base), \
|
||||
.enable_mask = 0x10, \
|
||||
}, \
|
||||
.stby_reg = (base), \
|
||||
.stby_mask = 0x20, \
|
||||
}
|
||||
|
||||
static struct pfuze_regulator pfuze100_regulators[] = {
|
||||
PFUZE100_SW_REG(SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
|
||||
PFUZE100_SW_REG(SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000),
|
||||
PFUZE100_SW_REG(SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000),
|
||||
PFUZE100_SW_REG(SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000),
|
||||
PFUZE100_SW_REG(SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000),
|
||||
PFUZE100_SW_REG(SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000),
|
||||
PFUZE100_SWB_REG(SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst),
|
||||
PFUZE100_SWB_REG(VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
|
||||
PFUZE100_FIXED_REG(VREFDDR, PFUZE100_VREFDDRCON, 750000),
|
||||
PFUZE100_VGEN_REG(VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000),
|
||||
PFUZE100_VGEN_REG(VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
|
||||
PFUZE100_VGEN_REG(VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000),
|
||||
PFUZE100_VGEN_REG(VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000),
|
||||
PFUZE100_VGEN_REG(VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
|
||||
PFUZE100_VGEN_REG(VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static struct of_regulator_match pfuze100_matches[] = {
|
||||
{ .name = "sw1ab", },
|
||||
{ .name = "sw1c", },
|
||||
{ .name = "sw2", },
|
||||
{ .name = "sw3a", },
|
||||
{ .name = "sw3b", },
|
||||
{ .name = "sw4", },
|
||||
{ .name = "swbst", },
|
||||
{ .name = "vsnvs", },
|
||||
{ .name = "vrefddr", },
|
||||
{ .name = "vgen1", },
|
||||
{ .name = "vgen2", },
|
||||
{ .name = "vgen3", },
|
||||
{ .name = "vgen4", },
|
||||
{ .name = "vgen5", },
|
||||
{ .name = "vgen6", },
|
||||
};
|
||||
|
||||
static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
|
||||
{
|
||||
struct device *dev = chip->dev;
|
||||
struct device_node *np, *parent;
|
||||
int ret;
|
||||
|
||||
np = of_node_get(dev->parent->of_node);
|
||||
if (!np)
|
||||
return 0;
|
||||
|
||||
parent = of_find_node_by_name(np, "regulators");
|
||||
if (!parent) {
|
||||
dev_err(dev, "regulators node not found\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = of_regulator_match(dev, parent, pfuze100_matches,
|
||||
ARRAY_SIZE(pfuze100_matches));
|
||||
|
||||
of_node_put(parent);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "Error parsing regulator init data: %d\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static inline struct regulator_init_data *match_init_data(int index)
|
||||
{
|
||||
return pfuze100_matches[index].init_data;
|
||||
}
|
||||
|
||||
static inline struct device_node *match_of_node(int index)
|
||||
{
|
||||
return pfuze100_matches[index].of_node;
|
||||
}
|
||||
#else
|
||||
static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
|
||||
{
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static inline struct regulator_init_data *match_init_data(int index)
|
||||
{
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static inline struct device_node *match_of_node(int index)
|
||||
{
|
||||
return NULL;
|
||||
}
|
||||
#endif
|
||||
|
||||
static int pfuze_identify(struct pfuze_chip *pfuze_chip)
|
||||
{
|
||||
unsigned int value;
|
||||
int ret;
|
||||
|
||||
ret = regmap_read(pfuze_chip->regmap, PFUZE100_DEVICEID, &value);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (value & 0x0f) {
|
||||
dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
|
||||
if (ret)
|
||||
return ret;
|
||||
dev_info(pfuze_chip->dev,
|
||||
"Full lay: %x, Metal lay: %x\n",
|
||||
(value & 0xf0) >> 4, value & 0x0f);
|
||||
|
||||
ret = regmap_read(pfuze_chip->regmap, PFUZE100_FABID, &value);
|
||||
if (ret)
|
||||
return ret;
|
||||
dev_info(pfuze_chip->dev, "FAB: %x, FIN: %x\n",
|
||||
(value & 0xc) >> 2, value & 0x3);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct regmap_config pfuze_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.max_register = PFUZE_NUMREGS,
|
||||
.cache_type = REGCACHE_RBTREE,
|
||||
};
|
||||
|
||||
static int pfuze100_regulator_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct pfuze_chip *pfuze_chip;
|
||||
struct pfuze_regulator_platform_data *pdata =
|
||||
dev_get_platdata(&client->dev);
|
||||
struct regulator_config config = { };
|
||||
int i, ret;
|
||||
|
||||
pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip),
|
||||
GFP_KERNEL);
|
||||
if (!pfuze_chip)
|
||||
return -ENOMEM;
|
||||
|
||||
dev_set_drvdata(&client->dev, pfuze_chip);
|
||||
|
||||
memcpy(pfuze_chip->regulator_descs, pfuze100_regulators,
|
||||
sizeof(pfuze_chip->regulator_descs));
|
||||
|
||||
pfuze_chip->dev = &client->dev;
|
||||
|
||||
pfuze_chip->regmap = devm_regmap_init_i2c(client, &pfuze_regmap_config);
|
||||
if (IS_ERR(pfuze_chip->regmap)) {
|
||||
ret = PTR_ERR(pfuze_chip->regmap);
|
||||
dev_err(&client->dev,
|
||||
"regmap allocation failed with err %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = pfuze_identify(pfuze_chip);
|
||||
if (ret) {
|
||||
dev_err(&client->dev, "unrecognized pfuze chip ID!\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = pfuze_parse_regulators_dt(pfuze_chip);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) {
|
||||
struct regulator_init_data *init_data;
|
||||
int val;
|
||||
|
||||
if (pdata)
|
||||
init_data = pdata->init_data[i];
|
||||
else
|
||||
init_data = match_init_data(i);
|
||||
|
||||
/* SW2~SW4 high bit check and modify the voltage value table */
|
||||
if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) {
|
||||
regmap_read(pfuze_chip->regmap, PFUZE100_SW2VOL +
|
||||
(i - PFUZE100_SW2) * 7, &val);
|
||||
if (val & 0x40) {
|
||||
pfuze_chip->regulator_descs[i].desc.min_uV
|
||||
= 800000;
|
||||
pfuze_chip->regulator_descs[i].desc.uV_step
|
||||
= 50000;
|
||||
}
|
||||
}
|
||||
|
||||
config.dev = &client->dev;
|
||||
config.init_data = init_data;
|
||||
config.driver_data = pfuze_chip;
|
||||
config.of_node = match_of_node(i);
|
||||
|
||||
pfuze_chip->regulators[i] = regulator_register(&pfuze_chip
|
||||
->regulator_descs[i].desc, &config);
|
||||
if (IS_ERR(pfuze_chip->regulators[i])) {
|
||||
dev_err(&client->dev, "register regulator%s failed\n",
|
||||
pfuze100_regulators[i].desc.name);
|
||||
ret = PTR_ERR(pfuze_chip->regulators[i]);
|
||||
while (--i >= 0)
|
||||
regulator_unregister(pfuze_chip->regulators[i]);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int pfuze100_regulator_remove(struct i2c_client *client)
|
||||
{
|
||||
int i;
|
||||
struct pfuze_chip *pfuze_chip = dev_get_drvdata(&client->dev);
|
||||
|
||||
for (i = 0; i < PFUZE100_MAX_REGULATOR; i++)
|
||||
regulator_unregister(pfuze_chip->regulators[i]);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct i2c_driver pfuze_driver = {
|
||||
.id_table = pfuze_device_id,
|
||||
.driver = {
|
||||
.name = "pfuze100-regulator",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = pfuze_dt_ids,
|
||||
},
|
||||
.probe = pfuze100_regulator_probe,
|
||||
.remove = pfuze100_regulator_remove,
|
||||
};
|
||||
module_i2c_driver(pfuze_driver);
|
||||
|
||||
MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
|
||||
MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC");
|
||||
MODULE_ALIAS("pfuze100-regulator");
|
||||
|
|
@ -0,0 +1,44 @@
|
|||
/*
|
||||
* Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
|
||||
*/
|
||||
#ifndef __LINUX_REG_PFUZE100_H
|
||||
#define __LINUX_REG_PFUZE100_H
|
||||
|
||||
#define PFUZE100_SW1AB 0
|
||||
#define PFUZE100_SW1C 1
|
||||
#define PFUZE100_SW2 2
|
||||
#define PFUZE100_SW3A 3
|
||||
#define PFUZE100_SW3B 4
|
||||
#define PFUZE100_SW4 5
|
||||
#define PFUZE100_SWBST 6
|
||||
#define PFUZE100_VSNVS 7
|
||||
#define PFUZE100_VREFDDR 8
|
||||
#define PFUZE100_VGEN1 9
|
||||
#define PFUZE100_VGEN2 10
|
||||
#define PFUZE100_VGEN3 11
|
||||
#define PFUZE100_VGEN4 12
|
||||
#define PFUZE100_VGEN5 13
|
||||
#define PFUZE100_VGEN6 14
|
||||
#define PFUZE100_MAX_REGULATOR 15
|
||||
|
||||
struct regulator_init_data;
|
||||
|
||||
struct pfuze_regulator_platform_data {
|
||||
struct regulator_init_data *init_data[PFUZE100_MAX_REGULATOR];
|
||||
};
|
||||
|
||||
#endif /* __LINUX_REG_PFUZE100_H */
|
||||
Загрузка…
Ссылка в новой задаче