microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branch 'ib-mt8135' into devel

This commit is contained in:
Linus Walleij 2021-08-11 10:50:07 +02:00
Родитель 6626a76ef8 b9ffc18c63
Коммит 379e28b5b3
13 изменённых файлов: 986 добавлений и 865 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

206
Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml Normal file
Просмотреть файл

@ -0,0 +1,206 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek MT65xx Pin Controller Device Tree Bindings
maintainers:
- Sean Wang <sean.wang@kernel.org>
description: |+
The Mediatek's Pin controller is used to control SoC pins.
properties:
compatible:
enum:
- mediatek,mt2701-pinctrl
- mediatek,mt2712-pinctrl
- mediatek,mt6397-pinctrl
- mediatek,mt7623-pinctrl
- mediatek,mt8127-pinctrl
- mediatek,mt8135-pinctrl
- mediatek,mt8167-pinctrl
- mediatek,mt8173-pinctrl
- mediatek,mt8516-pinctrl
reg:
maxItems: 1
pins-are-numbered:
$ref: /schemas/types.yaml#/definitions/flag
description: |
Specify the subnodes are using numbered pinmux to specify pins.
gpio-controller: true
"#gpio-cells":
const: 2
description: |
Number of cells in GPIO specifier. Since the generic GPIO
binding is used, the amount of cells must be specified as 2. See the below
mentioned gpio binding representation for description of particular cells.
mediatek,pctl-regmap:
$ref: /schemas/types.yaml#/definitions/phandle-array
minItems: 1
maxItems: 2
description: |
Should be phandles of the syscfg node.
interrupt-controller: true
interrupts:
minItems: 1
maxItems: 3
"#interrupt-cells":
const: 2
required:
- compatible
- pins-are-numbered
- gpio-controller
- "#gpio-cells"
patternProperties:
'-[0-9]+$':
type: object
additionalProperties: false
patternProperties:
'pins':
type: object
additionalProperties: false
description: |
A pinctrl node should contain at least one subnodes representing the
pinctrl groups available on the machine. Each subnode will list the
pins it needs, and how they should be configured, with regard to muxer
configuration, pullups, drive strength, input enable/disable and input
schmitt.
$ref: "/schemas/pinctrl/pincfg-node.yaml"
properties:
pinmux:
description:
integer array, represents gpio pin number and mux setting.
Supported pin number and mux varies for different SoCs, and are
defined as macros in <soc>-pinfunc.h directly.
bias-disable: true
bias-pull-up:
description: |
Besides generic pinconfig options, it can be used as the pull up
settings for 2 pull resistors, R0 and R1. User can configure those
special pins. Some macros have been defined for this usage, such
as MTK_PUPD_SET_R1R0_00. See dt-bindings/pinctrl/mt65xx.h for
valid arguments.
bias-pull-down: true
input-enable: true
input-disable: true
output-low: true
output-high: true
input-schmitt-enable: true
input-schmitt-disable: true
drive-strength:
description: |
Can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA,
etc. See dt-bindings/pinctrl/mt65xx.h for valid arguments.
required:
- pinmux
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/mt8135-pinfunc.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
syscfg_pctl_a: syscfg-pctl-a@10005000 {
compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
reg = <0 0x10005000 0 0x1000>;
};
syscfg_pctl_b: syscfg-pctl-b@1020c020 {
compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
reg = <0 0x1020C020 0 0x1000>;
};
pinctrl@1c20800 {
compatible = "mediatek,mt8135-pinctrl";
reg = <0 0x1000B000 0 0x1000>;
mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
pins-are-numbered;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
i2c0_pins_a: i2c0-0 {
pins1 {
pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
<MT8135_PIN_101_SCL0__FUNC_SCL0>;
bias-disable;
};
};
i2c1_pins_a: i2c1-0 {
pins {
pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
<MT8135_PIN_196_SCL1__FUNC_SCL1>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
};
i2c2_pins_a: i2c2-0 {
pins1 {
pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
bias-pull-down;
};
pins2 {
pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
bias-pull-up;
};
};
i2c3_pins_a: i2c3-0 {
pins1 {
pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
<MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins2 {
pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
<MT8135_PIN_36_SDA3__FUNC_SDA3>;
output-low;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
};
pins3 {
pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
<MT8135_PIN_60_JTDI__FUNC_JTDI>;
drive-strength = <32>;
};
};
};
};

173
Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml Normal file
Просмотреть файл

@ -0,0 +1,173 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6797-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek MT6797 Pin Controller Device Tree Bindings
maintainers:
- Sean Wang <sean.wang@kernel.org>
description: |+
The MediaTek's MT6797 Pin controller is used to control SoC pins.
properties:
compatible:
const: mediatek,mt6797-pinctrl
reg:
minItems: 5
maxItems: 5
reg-names:
items:
- const: gpio
- const: iocfgl
- const: iocfgb
- const: iocfgr
- const: iocfgt
gpio-controller: true
"#gpio-cells":
const: 2
description: |
Number of cells in GPIO specifier. Since the generic GPIO
binding is used, the amount of cells must be specified as 2. See the below
mentioned gpio binding representation for description of particular cells.
interrupt-controller: true
interrupts:
maxItems: 1
"#interrupt-cells":
const: 2
required:
- compatible
- reg
- reg-names
- gpio-controller
- "#gpio-cells"
patternProperties:
'-[0-9]+$':
type: object
additionalProperties: false
patternProperties:
'pins':
type: object
additionalProperties: false
description: |
A pinctrl node should contain at least one subnodes representing the
pinctrl groups available on the machine. Each subnode will list the
pins it needs, and how they should be configured, with regard to muxer
configuration, pullups, drive strength, input enable/disable and input
schmitt.
$ref: "/schemas/pinctrl/pincfg-node.yaml"
properties:
pinmux:
description:
integer array, represents gpio pin number and mux setting.
Supported pin number and mux varies for different SoCs, and are
defined as macros in <soc>-pinfunc.h directly.
bias-disable: true
bias-pull-up: true
bias-pull-down: true
input-enable: true
input-disable: true
output-enable: true
output-low: true
output-high: true
input-schmitt-enable: true
input-schmitt-disable: true
drive-strength:
enum: [2, 4, 8, 12, 16]
slew-rate:
enum: [0, 1]
mediatek,pull-up-adv:
description: |
Pull up setings for 2 pull resistors, R0 and R1. User can
configure those special pins. Valid arguments are described as below:
0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
mediatek,pull-down-adv:
description: |
Pull down settings for 2 pull resistors, R0 and R1. User can
configure those special pins. Valid arguments are described as below:
0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
mediatek,tdsel:
description: |
An integer describing the steps for output level shifter duty
cycle when asserted (high pulse width adjustment). Valid arguments
are from 0 to 15.
$ref: /schemas/types.yaml#/definitions/uint32
mediatek,rdsel:
description: |
An integer describing the steps for input level shifter duty cycle
when asserted (high pulse width adjustment). Valid arguments are
from 0 to 63.
$ref: /schemas/types.yaml#/definitions/uint32
required:
- pinmux
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/mt6797-pinfunc.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
pio: pinctrl@10005000 {
compatible = "mediatek,mt6797-pinctrl";
reg = <0 0x10005000 0 0x1000>,
<0 0x10002000 0 0x400>,
<0 0x10002400 0 0x400>,
<0 0x10002800 0 0x400>,
<0 0x10002C00 0 0x400>;
reg-names = "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt";
gpio-controller;
#gpio-cells = <2>;
uart_pins_a: uart-0 {
pins1 {
pinmux = <MT6797_GPIO232__FUNC_URXD1>,
<MT6797_GPIO233__FUNC_UTXD1>;
};
};
};
};

373
Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml Normal file
Просмотреть файл

@ -0,0 +1,373 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek MT7622 Pin Controller Device Tree Bindings
maintainers:
- Sean Wang <sean.wang@kernel.org>
description: |+
The MediaTek's MT7622 Pin controller is used to control SoC pins.
properties:
compatible:
enum:
- mediatek,mt7622-pinctrl
- mediatek,mt7629-pinctrl
reg:
maxItems: 1
reg-names:
items:
- const: eint
gpio-controller: true
"#gpio-cells":
const: 2
description: |
Number of cells in GPIO specifier. Since the generic GPIO
binding is used, the amount of cells must be specified as 2. See the below
mentioned gpio binding representation for description of particular cells.
interrupt-controller: true
interrupts:
maxItems: 1
"#interrupt-cells":
const: 2
required:
- compatible
- reg
- gpio-controller
- "#gpio-cells"
if:
required:
- interrupt-controller
then:
required:
- reg-names
- interrupts
- "#interrupt-cells"
patternProperties:
'-[0-9]+$':
type: object
additionalProperties: false
patternProperties:
'mux':
type: object
additionalProperties: false
description: |
pinmux configuration nodes.
$ref: "/schemas/pinctrl/pinmux-node.yaml"
properties:
function:
description: |
A string containing the name of the function to mux to the group.
enum: [emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, sd,
spi, tdm, uart, watchdog, wifi]
groups:
description: |
An array of strings. Each string contains the name of a group.
drive-strength:
enum: [4, 8, 12, 16]
required:
- groups
- function
allOf:
- if:
properties:
function:
const: emmc
then:
properties:
groups:
enum: [emmc, emmc_rst]
- if:
properties:
function:
const: eth
then:
properties:
groups:
enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
- if:
properties:
function:
const: i2c
then:
properties:
groups:
enum: [i2c0, i2c_0, i2c_1, i2c1_0, i2c1_1, i2c1_2, i2c2_0,
i2c2_1, i2c2_2]
- if:
properties:
function:
const: i2s
then:
properties:
groups:
enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
i2s1_out_data, i2s2_out_data, i2s3_out_data,
i2s4_out_data]
- if:
properties:
function:
const: ir
then:
properties:
groups:
enum: [ir_0_tx, ir_1_tx, ir_2_tx, ir_0_rx, ir_1_rx, ir_2_rx]
- if:
properties:
function:
const: led
then:
properties:
groups:
enum: [ephy_leds, ephy0_led, ephy1_led, ephy2_led, ephy3_led,
ephy4_led, wled, wf2g_led, wf5g_led]
- if:
properties:
function:
const: flash
then:
properties:
groups:
enum: [par_nand, snfi, spi_nor]
- if:
properties:
function:
const: pcie
then:
properties:
groups:
enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
pcie_wake, pcie_clkreq]
- if:
properties:
function:
const: pmic
then:
properties:
groups:
enum: [pmic_bus]
- if:
properties:
function:
const: pwm
then:
properties:
groups:
enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
pwm_ch7_0, pwm_0, pwm_1]
- if:
properties:
function:
const: sd
then:
properties:
groups:
enum: [sd_0, sd_1]
- if:
properties:
function:
const: spi
then:
properties:
groups:
enum: [spic0_0, spic0_1, spic1_0, spic1_1, spic2_0_wp_hold,
spic2_0, spi_0, spi_1, spi_wp, spi_hold]
- if:
properties:
function:
const: tdm
then:
properties:
groups:
enum: [tdm_0_out_mclk_bclk_ws, tdm_0_in_mclk_bclk_ws,
tdm_0_out_data, tdm_0_in_data, tdm_1_out_mclk_bclk_ws,
tdm_1_in_mclk_bclk_ws, tdm_1_out_data, tdm_1_in_data]
- if:
properties:
function:
const: uart
then:
properties:
groups:
enum: [uart0_0_tx_rx, uart1_0_tx_rx, uart1_0_rts_cts,
uart1_1_tx_rx, uart1_1_rts_cts, uart2_0_tx_rx,
uart2_0_rts_cts, uart2_1_tx_rx, uart2_1_rts_cts,
uart2_2_tx_rx, uart2_2_rts_cts, uart2_3_tx_rx,
uart3_0_tx_rx, uart3_1_tx_rx, uart3_1_rts_cts,
uart4_0_tx_rx, uart4_1_tx_rx, uart4_1_rts_cts,
uart4_2_tx_rx, uart4_2_rts_cts, uart0_txd_rxd,
uart1_0_txd_rxd, uart1_0_cts_rts, uart1_1_txd_rxd,
uart1_1_cts_rts, uart2_0_txd_rxd, uart2_0_cts_rts,
uart2_1_txd_rxd, uart2_1_cts_rts]
- if:
properties:
function:
const: watchdog
then:
properties:
groups:
enum: [watchdog]
- if:
properties:
function:
const: wifi
then:
properties:
groups:
enum: [wf0_2g, wf0_5g]
'conf':
type: object
additionalProperties: false
description: |
pinconf configuration nodes.
$ref: "/schemas/pinctrl/pincfg-node.yaml"
properties:
groups:
description: |
An array of strings. Each string contains the name of a group.
Valid values are the same as the pinmux node.
pins:
description: |
An array of strings. Each string contains the name of a pin.
enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
bias-disable: true
bias-pull-up: true
bias-pull-down: true
input-enable: true
input-disable: true
output-enable: true
output-low: true
output-high: true
input-schmitt-enable: true
input-schmitt-disable: true
drive-strength:
enum: [4, 8, 12, 16]
slew-rate:
enum: [0, 1]
mediatek,tdsel:
description: |
An integer describing the steps for output level shifter duty
cycle when asserted (high pulse width adjustment). Valid arguments
are from 0 to 15.
$ref: /schemas/types.yaml#/definitions/uint32
mediatek,rdsel:
description: |
An integer describing the steps for input level shifter duty cycle
when asserted (high pulse width adjustment). Valid arguments are
from 0 to 63.
$ref: /schemas/types.yaml#/definitions/uint32
required:
- pins
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
pio: pinctrl@10211000 {
compatible = "mediatek,mt7622-pinctrl";
reg = <0 0x10211000 0 0x1000>;
gpio-controller;
#gpio-cells = <2>;
pinctrl_eth_default: eth-0 {
mux-mdio {
groups = "mdc_mdio";
function = "eth";
drive-strength = <12>;
};
mux-gmac2 {
groups = "rgmii_via_gmac2";
function = "eth";
drive-strength = <12>;
};
mux-esw {
groups = "esw";
function = "eth";
drive-strength = <8>;
};
conf-mdio {
pins = "MDC";
bias-pull-up;
};
};
};
};

228
Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml Normal file
Просмотреть файл

@ -0,0 +1,228 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8183-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek MT8183 Pin Controller Device Tree Bindings
maintainers:
- Sean Wang <sean.wang@kernel.org>
description: |+
The MediaTek's MT8183 Pin controller is used to control SoC pins.
properties:
compatible:
const: mediatek,mt8183-pinctrl
reg:
minItems: 10
maxItems: 10
reg-names:
items:
- const: iocfg0
- const: iocfg1
- const: iocfg2
- const: iocfg3
- const: iocfg4
- const: iocfg5
- const: iocfg6
- const: iocfg7
- const: iocfg8
- const: eint
gpio-controller: true
"#gpio-cells":
const: 2
description: |
Number of cells in GPIO specifier. Since the generic GPIO
binding is used, the amount of cells must be specified as 2. See the below
mentioned gpio binding representation for description of particular cells.
gpio-ranges:
minItems: 1
maxItems: 5
description: |
GPIO valid number range.
interrupt-controller: true
interrupts:
maxItems: 1
"#interrupt-cells":
const: 2
required:
- compatible
- reg
- gpio-controller
- "#gpio-cells"
- gpio-ranges
patternProperties:
'-[0-9]+$':
type: object
additionalProperties: false
patternProperties:
'pins':
type: object
additionalProperties: false
description: |
A pinctrl node should contain at least one subnodes representing the
pinctrl groups available on the machine. Each subnode will list the
pins it needs, and how they should be configured, with regard to muxer
configuration, pullups, drive strength, input enable/disable and input
schmitt.
$ref: "/schemas/pinctrl/pincfg-node.yaml"
properties:
pinmux:
description:
integer array, represents gpio pin number and mux setting.
Supported pin number and mux varies for different SoCs, and are
defined as macros in <soc>-pinfunc.h directly.
bias-disable: true
bias-pull-up: true
bias-pull-down: true
input-enable: true
input-disable: true
output-low: true
output-high: true
input-schmitt-enable: true
input-schmitt-disable: true
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
mediatek,drive-strength-adv:
description: |
Describe the specific driving setup property.
For I2C pins, the existing generic driving setup can only support
2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
driving setup, the existing generic setup will be disabled.
The specific driving setup is controlled by E1E0EN.
When E1=0/E0=0, the strength is 0.125mA.
When E1=0/E0=1, the strength is 0.25mA.
When E1=1/E0=0, the strength is 0.5mA.
When E1=1/E0=1, the strength is 1mA.
EN is used to enable or disable the specific driving setup.
Valid arguments are described as below:
0: (E1, E0, EN) = (0, 0, 0)
1: (E1, E0, EN) = (0, 0, 1)
2: (E1, E0, EN) = (0, 1, 0)
3: (E1, E0, EN) = (0, 1, 1)
4: (E1, E0, EN) = (1, 0, 0)
5: (E1, E0, EN) = (1, 0, 1)
6: (E1, E0, EN) = (1, 1, 0)
7: (E1, E0, EN) = (1, 1, 1)
So the valid arguments are from 0 to 7.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3, 4, 5, 6, 7]
mediatek,pull-up-adv:
description: |
Pull up setings for 2 pull resistors, R0 and R1. User can
configure those special pins. Valid arguments are described as below:
0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
mediatek,pull-down-adv:
description: |
Pull down settings for 2 pull resistors, R0 and R1. User can
configure those special pins. Valid arguments are described as below:
0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
mediatek,tdsel:
description: |
An integer describing the steps for output level shifter duty
cycle when asserted (high pulse width adjustment). Valid arguments
are from 0 to 15.
$ref: /schemas/types.yaml#/definitions/uint32
mediatek,rdsel:
description: |
An integer describing the steps for input level shifter duty cycle
when asserted (high pulse width adjustment). Valid arguments are
from 0 to 63.
$ref: /schemas/types.yaml#/definitions/uint32
required:
- pinmux
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/mt8183-pinfunc.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
pio: pinctrl@10005000 {
compatible = "mediatek,mt8183-pinctrl";
reg = <0 0x10005000 0 0x1000>,
<0 0x11f20000 0 0x1000>,
<0 0x11e80000 0 0x1000>,
<0 0x11e70000 0 0x1000>,
<0 0x11e90000 0 0x1000>,
<0 0x11d30000 0 0x1000>,
<0 0x11d20000 0 0x1000>,
<0 0x11c50000 0 0x1000>,
<0 0x11f30000 0 0x1000>,
<0 0x1000b000 0 0x1000>;
reg-names = "iocfg0", "iocfg1", "iocfg2",
"iocfg3", "iocfg4", "iocfg5",
"iocfg6", "iocfg7", "iocfg8",
"eint";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pio 0 0 192>;
interrupt-controller;
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
i2c0_pins_a: i2c-0 {
pins1 {
pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
<PINMUX_GPIO49__FUNC_SDA5>;
mediatek,pull-up-adv = <3>;
mediatek,drive-strength-adv = <7>;
};
};
i2c1_pins_a: i2c-1 {
pins {
pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
<PINMUX_GPIO51__FUNC_SDA3>;
mediatek,pull-down-adv = <2>;
mediatek,drive-strength-adv = <4>;
};
};
};
};

156
Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
Просмотреть файл

@ -1,156 +0,0 @@
* Mediatek MT65XX Pin Controller
The Mediatek's Pin controller is used to control SoC pins.
Required properties:
- compatible: value should be one of the following.
"mediatek,mt2701-pinctrl", compatible with mt2701 pinctrl.
"mediatek,mt2712-pinctrl", compatible with mt2712 pinctrl.
"mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl.
"mediatek,mt7623-pinctrl", compatible with mt7623 pinctrl.
"mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
"mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
"mediatek,mt8167-pinctrl", compatible with mt8167 pinctrl.
"mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
"mediatek,mt8365-pinctrl", compatible with mt8365 pinctrl.
"mediatek,mt8516-pinctrl", compatible with mt8516 pinctrl.
- pins-are-numbered: Specify the subnodes are using numbered pinmux to
specify pins.
- gpio-controller : Marks the device node as a gpio controller.
- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
binding is used, the amount of cells must be specified as 2. See the below
mentioned gpio binding representation for description of particular cells.
Eg: <&pio 6 0>
<[phandle of the gpio controller node]
[line number within the gpio controller]
[flags]>
Values for gpio specifier:
- Line number: is a value between 0 to 202.
- Flags: bit field of flags, as defined in <dt-bindings/gpio/gpio.h>.
Only the following flags are supported:
0 - GPIO_ACTIVE_HIGH
1 - GPIO_ACTIVE_LOW
Optional properties:
- mediatek,pctl-regmap: Should be a phandle of the syscfg node.
- reg: physicall address base for EINT registers
- interrupt-controller: Marks the device node as an interrupt controller
- #interrupt-cells: Should be two.
- interrupts : The interrupt outputs from the controller.
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices.
Subnode format
A pinctrl node should contain at least one subnodes representing the
pinctrl groups available on the machine. Each subnode will list the
pins it needs, and how they should be configured, with regard to muxer
configuration, pullups, drive strength, input enable/disable and input schmitt.
node {
pinmux = <PIN_NUMBER_PINMUX>;
GENERIC_PINCONFIG;
};
Required properties:
- pinmux: integer array, represents gpio pin number and mux setting.
Supported pin number and mux varies for different SoCs, and are defined
as macros in boot/dts/<soc>-pinfunc.h directly.
Optional properties:
- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable,
bias-pull-down, bias-pull-up, input-enable, input-disable, output-low, output-high,
input-schmitt-enable, input-schmitt-disable and drive-strength are valid.
Some special pins have extra pull up strength, there are R0 and R1 pull-up
resistors available, but for user, it's only need to set R1R0 as 00, 01, 10 or 11.
So when config bias-pull-up, it support arguments for those special pins.
Some macros have been defined for this usage, such as MTK_PUPD_SET_R1R0_00.
See dt-bindings/pinctrl/mt65xx.h.
When config drive-strength, it can support some arguments, such as
MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h.
Examples:
#include "mt8135-pinfunc.h"
...
{
syscfg_pctl_a: syscfg-pctl-a@10005000 {
compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
reg = <0 0x10005000 0 0x1000>;
};
syscfg_pctl_b: syscfg-pctl-b@1020c020 {
compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
reg = <0 0x1020C020 0 0x1000>;
};
pinctrl@1c20800 {
compatible = "mediatek,mt8135-pinctrl";
reg = <0 0x1000B000 0 0x1000>;
mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
pins-are-numbered;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
i2c0_pins_a: i2c0@0 {
pins1 {
pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
<MT8135_PIN_101_SCL0__FUNC_SCL0>;
bias-disable;
};
};
i2c1_pins_a: i2c1@0 {
pins {
pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
<MT8135_PIN_196_SCL1__FUNC_SCL1>;
bias-pull-up = <55>;
};
};
i2c2_pins_a: i2c2@0 {
pins1 {
pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
bias-pull-down;
};
pins2 {
pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
bias-pull-up;
};
};
i2c3_pins_a: i2c3@0 {
pins1 {
pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
<MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
bias-pull-up = <55>;
};
pins2 {
pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
<MT8135_PIN_36_SDA3__FUNC_SDA3>;
output-low;
bias-pull-up = <55>;
};
pins3 {
pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
<MT8135_PIN_60_JTDI__FUNC_JTDI>;
drive-strength = <32>;
};
};
...
}
};

83
Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt
Просмотреть файл

@ -1,83 +0,0 @@
* MediaTek MT6797 Pin Controller
The MediaTek's MT6797 Pin controller is used to control SoC pins.
Required properties:
- compatible: Value should be one of the following.
"mediatek,mt6797-pinctrl", compatible with mt6797 pinctrl.
- reg: Should contain address and size for gpio, iocfgl, iocfgb,
iocfgr and iocfgt register bases.
- reg-names: An array of strings describing the "reg" entries. Must
contain "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt".
- gpio-controller: Marks the device node as a gpio controller.
- #gpio-cells: Should be two. The first cell is the gpio pin number
and the second cell is used for optional parameters.
Optional properties:
- interrupt-controller: Marks the device node as an interrupt controller.
- #interrupt-cells: Should be two.
- interrupts : The interrupt outputs from the controller.
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices.
Subnode format
A pinctrl node should contain at least one subnodes representing the
pinctrl groups available on the machine. Each subnode will list the
pins it needs, and how they should be configured, with regard to muxer
configuration, pullups, drive strength, input enable/disable and input schmitt.
node {
pinmux = <PIN_NUMBER_PINMUX>;
GENERIC_PINCONFIG;
};
Required properties:
- pinmux: Integer array, represents gpio pin number and mux setting.
Supported pin number and mux varies for different SoCs, and are defined
as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
Optional properties:
- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable,
bias-pull, bias-pull-down, input-enable, input-schmitt-enable,
input-schmitt-disable, output-enable output-low, output-high,
drive-strength, and slew-rate are valid.
Valid arguments for 'slew-rate' are '0' for no slew rate controlled and
'1' for slower slew rate respectively. Valid arguments for 'drive-strength'
is limited, such as 2, 4, 8, 12, or 16 in mA.
Some optional vendor properties as defined are valid to specify in a
pinconf subnode:
- mediatek,tdsel: An integer describing the steps for output level shifter
duty cycle when asserted (high pulse width adjustment). Valid arguments
are from 0 to 15.
- mediatek,rdsel: An integer describing the steps for input level shifter
duty cycle when asserted (high pulse width adjustment). Valid arguments
are from 0 to 63.
- mediatek,pull-up-adv: An integer describing the code R1R0 as 0, 1, 2
or 3 for the advanced pull-up resistors.
- mediatek,pull-down-adv: An integer describing the code R1R0 as 0, 1, 2,
or 3 for the advanced pull-down resistors.
Examples:
pio: pinctrl@10005000 {
compatible = "mediatek,mt6797-pinctrl";
reg = <0 0x10005000 0 0x1000>,
<0 0x10002000 0 0x400>,
<0 0x10002400 0 0x400>,
<0 0x10002800 0 0x400>,
<0 0x10002C00 0 0x400>;
reg-names = "gpio", "iocfgl", "iocfgb",
"iocfgr", "iocfgt";
gpio-controller;
#gpio-cells = <2>;
uart1_pins_a: uart1 {
pins1 {
pinmux = <MT6797_GPIO232__FUNC_URXD1>,
<MT6797_GPIO233__FUNC_UTXD1>;
};
};
};

490
Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
Просмотреть файл

@ -1,490 +0,0 @@
== MediaTek MT7622 pinctrl controller ==
Required properties for the root node:
- compatible: Should be one of the following
"mediatek,mt7622-pinctrl" for MT7622 SoC
"mediatek,mt7629-pinctrl" for MT7629 SoC
- reg: offset and length of the pinctrl space
- gpio-controller: Marks the device node as a GPIO controller.
- #gpio-cells: Should be two. The first cell is the pin number and the
second is the GPIO flags.
Optional properties:
- interrupt-controller : Marks the device node as an interrupt controller
If the property interrupt-controller is defined, following property is required
- reg-names: A string describing the "reg" entries. Must contain "eint".
- interrupts : The interrupt output from the controller.
- #interrupt-cells: Should be two.
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
MT7622 pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration
parameters, such as pull-up, slew rate, etc.
We support 2 types of configuration nodes. Those nodes can be either pinmux
nodes or pinconf nodes. Each configuration node can consist of multiple nodes
describing the pinmux and pinconf options.
The name of each subnode doesn't matter as long as it is unique; all subnodes
should be enumerated and processed purely based on their content.
== pinmux nodes content ==
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pinmux subnode:
Required properties are:
- groups: An array of strings. Each string contains the name of a group.
Valid values for these names are listed below.
- function: A string containing the name of the function to mux to the
group. Valid values for function names are listed below.
== pinconf nodes content ==
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pinconf subnode:
Required properties are:
- pins: An array of strings. Each string contains the name of a pin.
Valid values for these names are listed below.
- groups: An array of strings. Each string contains the name of a group.
Valid values for these names are listed below.
Optional properies are:
bias-disable, bias-pull, bias-pull-down, input-enable,
input-schmitt-enable, input-schmitt-disable, output-enable
output-low, output-high, drive-strength, slew-rate
Valid arguments for 'slew-rate' are '0' for no slew rate controlled and '1' for
slower slew rate respectively.
Valid arguments for 'drive-strength', 4, 8, 12, or 16 in mA.
The following specific properties as defined are valid to specify in a pinconf
subnode:
Optional properties are:
- mediatek,tdsel: An integer describing the steps for output level shifter duty
cycle when asserted (high pulse width adjustment). Valid arguments are from 0
to 15.
- mediatek,rdsel: An integer describing the steps for input level shifter duty
cycle when asserted (high pulse width adjustment). Valid arguments are from 0
to 63.
== Valid values for pins, function and groups on MT7622 ==
Valid values for pins are:
pins can be referenced via the pin names as the below table shown and the
related physical number is also put ahead of those names which helps cross
references to pins between groups to know whether pins assignment conflict
happens among devices try to acquire those available pins.
Pin #: Valid values for pins
-----------------------------
PIN 0: "GPIO_A"
PIN 1: "I2S1_IN"
PIN 2: "I2S1_OUT"
PIN 3: "I2S_BCLK"
PIN 4: "I2S_WS"
PIN 5: "I2S_MCLK"
PIN 6: "TXD0"
PIN 7: "RXD0"
PIN 8: "SPI_WP"
PIN 9: "SPI_HOLD"
PIN 10: "SPI_CLK"
PIN 11: "SPI_MOSI"
PIN 12: "SPI_MISO"
PIN 13: "SPI_CS"
PIN 14: "I2C_SDA"
PIN 15: "I2C_SCL"
PIN 16: "I2S2_IN"
PIN 17: "I2S3_IN"
PIN 18: "I2S4_IN"
PIN 19: "I2S2_OUT"
PIN 20: "I2S3_OUT"
PIN 21: "I2S4_OUT"
PIN 22: "GPIO_B"
PIN 23: "MDC"
PIN 24: "MDIO"
PIN 25: "G2_TXD0"
PIN 26: "G2_TXD1"
PIN 27: "G2_TXD2"
PIN 28: "G2_TXD3"
PIN 29: "G2_TXEN"
PIN 30: "G2_TXC"
PIN 31: "G2_RXD0"
PIN 32: "G2_RXD1"
PIN 33: "G2_RXD2"
PIN 34: "G2_RXD3"
PIN 35: "G2_RXDV"
PIN 36: "G2_RXC"
PIN 37: "NCEB"
PIN 38: "NWEB"
PIN 39: "NREB"
PIN 40: "NDL4"
PIN 41: "NDL5"
PIN 42: "NDL6"
PIN 43: "NDL7"
PIN 44: "NRB"
PIN 45: "NCLE"
PIN 46: "NALE"
PIN 47: "NDL0"
PIN 48: "NDL1"
PIN 49: "NDL2"
PIN 50: "NDL3"
PIN 51: "MDI_TP_P0"
PIN 52: "MDI_TN_P0"
PIN 53: "MDI_RP_P0"
PIN 54: "MDI_RN_P0"
PIN 55: "MDI_TP_P1"
PIN 56: "MDI_TN_P1"
PIN 57: "MDI_RP_P1"
PIN 58: "MDI_RN_P1"
PIN 59: "MDI_RP_P2"
PIN 60: "MDI_RN_P2"
PIN 61: "MDI_TP_P2"
PIN 62: "MDI_TN_P2"
PIN 63: "MDI_TP_P3"
PIN 64: "MDI_TN_P3"
PIN 65: "MDI_RP_P3"
PIN 66: "MDI_RN_P3"
PIN 67: "MDI_RP_P4"
PIN 68: "MDI_RN_P4"
PIN 69: "MDI_TP_P4"
PIN 70: "MDI_TN_P4"
PIN 71: "PMIC_SCL"
PIN 72: "PMIC_SDA"
PIN 73: "SPIC1_CLK"
PIN 74: "SPIC1_MOSI"
PIN 75: "SPIC1_MISO"
PIN 76: "SPIC1_CS"
PIN 77: "GPIO_D"
PIN 78: "WATCHDOG"
PIN 79: "RTS3_N"
PIN 80: "CTS3_N"
PIN 81: "TXD3"
PIN 82: "RXD3"
PIN 83: "PERST0_N"
PIN 84: "PERST1_N"
PIN 85: "WLED_N"
PIN 86: "EPHY_LED0_N"
PIN 87: "AUXIN0"
PIN 88: "AUXIN1"
PIN 89: "AUXIN2"
PIN 90: "AUXIN3"
PIN 91: "TXD4"
PIN 92: "RXD4"
PIN 93: "RTS4_N"
PIN 94: "CST4_N"
PIN 95: "PWM1"
PIN 96: "PWM2"
PIN 97: "PWM3"
PIN 98: "PWM4"
PIN 99: "PWM5"
PIN 100: "PWM6"
PIN 101: "PWM7"
PIN 102: "GPIO_E"
Valid values for function are:
"emmc", "eth", "i2c", "i2s", "ir", "led", "flash", "pcie",
"pmic", "pwm", "sd", "spi", "tdm", "uart", "watchdog"
Valid values for groups are:
additional data is put followingly with valid value allowing us to know which
applicable function and which relevant pins (in pin#) are able applied for that
group.
Valid value function pins (in pin#)
-------------------------------------------------------------------------
"emmc" "emmc" 40, 41, 42, 43, 44, 45,
47, 48, 49, 50
"emmc_rst" "emmc" 37
"esw" "eth" 51, 52, 53, 54, 55, 56,
57, 58, 59, 60, 61, 62,
63, 64, 65, 66, 67, 68,
69, 70
"esw_p0_p1" "eth" 51, 52, 53, 54, 55, 56,
57, 58
"esw_p2_p3_p4" "eth" 59, 60, 61, 62, 63, 64,
65, 66, 67, 68, 69, 70
"rgmii_via_esw" "eth" 59, 60, 61, 62, 63, 64,
65, 66, 67, 68, 69, 70
"rgmii_via_gmac1" "eth" 59, 60, 61, 62, 63, 64,
65, 66, 67, 68, 69, 70
"rgmii_via_gmac2" "eth" 25, 26, 27, 28, 29, 30,
31, 32, 33, 34, 35, 36
"mdc_mdio" "eth" 23, 24
"i2c0" "i2c" 14, 15
"i2c1_0" "i2c" 55, 56
"i2c1_1" "i2c" 73, 74
"i2c1_2" "i2c" 87, 88
"i2c2_0" "i2c" 57, 58
"i2c2_1" "i2c" 75, 76
"i2c2_2" "i2c" 89, 90
"i2s_in_mclk_bclk_ws" "i2s" 3, 4, 5
"i2s1_in_data" "i2s" 1
"i2s2_in_data" "i2s" 16
"i2s3_in_data" "i2s" 17
"i2s4_in_data" "i2s" 18
"i2s_out_mclk_bclk_ws" "i2s" 3, 4, 5
"i2s1_out_data" "i2s" 2
"i2s2_out_data" "i2s" 19
"i2s3_out_data" "i2s" 20
"i2s4_out_data" "i2s" 21
"ir_0_tx" "ir" 16
"ir_1_tx" "ir" 59
"ir_2_tx" "ir" 99
"ir_0_rx" "ir" 17
"ir_1_rx" "ir" 60
"ir_2_rx" "ir" 100
"ephy_leds" "led" 86, 91, 92, 93, 94
"ephy0_led" "led" 86
"ephy1_led" "led" 91
"ephy2_led" "led" 92
"ephy3_led" "led" 93
"ephy4_led" "led" 94
"wled" "led" 85
"par_nand" "flash" 37, 38, 39, 40, 41, 42,
43, 44, 45, 46, 47, 48,
49, 50
"snfi" "flash" 8, 9, 10, 11, 12, 13
"spi_nor" "flash" 8, 9, 10, 11, 12, 13
"pcie0_0_waken" "pcie" 14
"pcie0_1_waken" "pcie" 79
"pcie1_0_waken" "pcie" 14
"pcie0_0_clkreq" "pcie" 15
"pcie0_1_clkreq" "pcie" 80
"pcie1_0_clkreq" "pcie" 15
"pcie0_pad_perst" "pcie" 83
"pcie1_pad_perst" "pcie" 84
"pmic_bus" "pmic" 71, 72
"pwm_ch1_0" "pwm" 51
"pwm_ch1_1" "pwm" 73
"pwm_ch1_2" "pwm" 95
"pwm_ch2_0" "pwm" 52
"pwm_ch2_1" "pwm" 74
"pwm_ch2_2" "pwm" 96
"pwm_ch3_0" "pwm" 53
"pwm_ch3_1" "pwm" 75
"pwm_ch3_2" "pwm" 97
"pwm_ch4_0" "pwm" 54
"pwm_ch4_1" "pwm" 67
"pwm_ch4_2" "pwm" 76
"pwm_ch4_3" "pwm" 98
"pwm_ch5_0" "pwm" 68
"pwm_ch5_1" "pwm" 77
"pwm_ch5_2" "pwm" 99
"pwm_ch6_0" "pwm" 69
"pwm_ch6_1" "pwm" 78
"pwm_ch6_2" "pwm" 81
"pwm_ch6_3" "pwm" 100
"pwm_ch7_0" "pwm" 70
"pwm_ch7_1" "pwm" 82
"pwm_ch7_2" "pwm" 101
"sd_0" "sd" 16, 17, 18, 19, 20, 21
"sd_1" "sd" 25, 26, 27, 28, 29, 30
"spic0_0" "spi" 63, 64, 65, 66
"spic0_1" "spi" 79, 80, 81, 82
"spic1_0" "spi" 67, 68, 69, 70
"spic1_1" "spi" 73, 74, 75, 76
"spic2_0_wp_hold" "spi" 8, 9
"spic2_0" "spi" 10, 11, 12, 13
"tdm_0_out_mclk_bclk_ws" "tdm" 8, 9, 10
"tdm_0_in_mclk_bclk_ws" "tdm" 11, 12, 13
"tdm_0_out_data" "tdm" 20
"tdm_0_in_data" "tdm" 21
"tdm_1_out_mclk_bclk_ws" "tdm" 57, 58, 59
"tdm_1_in_mclk_bclk_ws" "tdm" 60, 61, 62
"tdm_1_out_data" "tdm" 55
"tdm_1_in_data" "tdm" 56
"uart0_0_tx_rx" "uart" 6, 7
"uart1_0_tx_rx" "uart" 55, 56
"uart1_0_rts_cts" "uart" 57, 58
"uart1_1_tx_rx" "uart" 73, 74
"uart1_1_rts_cts" "uart" 75, 76
"uart2_0_tx_rx" "uart" 3, 4
"uart2_0_rts_cts" "uart" 1, 2
"uart2_1_tx_rx" "uart" 51, 52
"uart2_1_rts_cts" "uart" 53, 54
"uart2_2_tx_rx" "uart" 59, 60
"uart2_2_rts_cts" "uart" 61, 62
"uart2_3_tx_rx" "uart" 95, 96
"uart3_0_tx_rx" "uart" 57, 58
"uart3_1_tx_rx" "uart" 81, 82
"uart3_1_rts_cts" "uart" 79, 80
"uart4_0_tx_rx" "uart" 61, 62
"uart4_1_tx_rx" "uart" 91, 92
"uart4_1_rts_cts" "uart" 93, 94
"uart4_2_tx_rx" "uart" 97, 98
"uart4_2_rts_cts" "uart" 95, 96
"watchdog" "watchdog" 78
== Valid values for pins, function and groups on MT7629 ==
Pin #: Valid values for pins
-----------------------------
PIN 0: "TOP_5G_CLK"
PIN 1: "TOP_5G_DATA"
PIN 2: "WF0_5G_HB0"
PIN 3: "WF0_5G_HB1"
PIN 4: "WF0_5G_HB2"
PIN 5: "WF0_5G_HB3"
PIN 6: "WF0_5G_HB4"
PIN 7: "WF0_5G_HB5"
PIN 8: "WF0_5G_HB6"
PIN 9: "XO_REQ"
PIN 10: "TOP_RST_N"
PIN 11: "SYS_WATCHDOG"
PIN 12: "EPHY_LED0_N_JTDO"
PIN 13: "EPHY_LED1_N_JTDI"
PIN 14: "EPHY_LED2_N_JTMS"
PIN 15: "EPHY_LED3_N_JTCLK"
PIN 16: "EPHY_LED4_N_JTRST_N"
PIN 17: "WF2G_LED_N"
PIN 18: "WF5G_LED_N"
PIN 19: "I2C_SDA"
PIN 20: "I2C_SCL"
PIN 21: "GPIO_9"
PIN 22: "GPIO_10"
PIN 23: "GPIO_11"
PIN 24: "GPIO_12"
PIN 25: "UART1_TXD"
PIN 26: "UART1_RXD"
PIN 27: "UART1_CTS"
PIN 28: "UART1_RTS"
PIN 29: "UART2_TXD"
PIN 30: "UART2_RXD"
PIN 31: "UART2_CTS"
PIN 32: "UART2_RTS"
PIN 33: "MDI_TP_P1"
PIN 34: "MDI_TN_P1"
PIN 35: "MDI_RP_P1"
PIN 36: "MDI_RN_P1"
PIN 37: "MDI_RP_P2"
PIN 38: "MDI_RN_P2"
PIN 39: "MDI_TP_P2"
PIN 40: "MDI_TN_P2"
PIN 41: "MDI_TP_P3"
PIN 42: "MDI_TN_P3"
PIN 43: "MDI_RP_P3"
PIN 44: "MDI_RN_P3"
PIN 45: "MDI_RP_P4"
PIN 46: "MDI_RN_P4"
PIN 47: "MDI_TP_P4"
PIN 48: "MDI_TN_P4"
PIN 49: "SMI_MDC"
PIN 50: "SMI_MDIO"
PIN 51: "PCIE_PERESET_N"
PIN 52: "PWM_0"
PIN 53: "GPIO_0"
PIN 54: "GPIO_1"
PIN 55: "GPIO_2"
PIN 56: "GPIO_3"
PIN 57: "GPIO_4"
PIN 58: "GPIO_5"
PIN 59: "GPIO_6"
PIN 60: "GPIO_7"
PIN 61: "GPIO_8"
PIN 62: "SPI_CLK"
PIN 63: "SPI_CS"
PIN 64: "SPI_MOSI"
PIN 65: "SPI_MISO"
PIN 66: "SPI_WP"
PIN 67: "SPI_HOLD"
PIN 68: "UART0_TXD"
PIN 69: "UART0_RXD"
PIN 70: "TOP_2G_CLK"
PIN 71: "TOP_2G_DATA"
PIN 72: "WF0_2G_HB0"
PIN 73: "WF0_2G_HB1"
PIN 74: "WF0_2G_HB2"
PIN 75: "WF0_2G_HB3"
PIN 76: "WF0_2G_HB4"
PIN 77: "WF0_2G_HB5"
PIN 78: "WF0_2G_HB6"
Valid values for function are:
"eth", "i2c", "led", "flash", "pcie", "pwm", "spi", "uart",
"watchdog", "wifi"
Valid values for groups are:
Valid value function pins (in pin#)
----------------------------------------------------------------
"mdc_mdio" "eth" 23, 24
"i2c_0" "i2c" 19, 20
"i2c_1" "i2c" 53, 54
"ephy_leds" "led" 12, 13, 14, 15, 16,
17, 18
"ephy0_led" "led" 12
"ephy1_led" "led" 13
"ephy2_led" "led" 14
"ephy3_led" "led" 15
"ephy4_led" "led" 16
"wf2g_led" "led" 17
"wf5g_led" "led" 18
"snfi" "flash" 62, 63, 64, 65, 66, 67
"spi_nor" "flash" 62, 63, 64, 65, 66, 67
"pcie_pereset" "pcie" 51
"pcie_wake" "pcie" 55
"pcie_clkreq" "pcie" 56
"pwm_0" "pwm" 52
"pwm_1" "pwm" 61
"spi_0" "spi" 21, 22, 23, 24
"spi_1" "spi" 62, 63, 64, 65
"spi_wp" "spi" 66
"spi_hold" "spi" 67
"uart0_txd_rxd" "uart" 68, 69
"uart1_0_txd_rxd" "uart" 25, 26
"uart1_0_cts_rts" "uart" 27, 28
"uart1_1_txd_rxd" "uart" 53, 54
"uart1_1_cts_rts" "uart" 55, 56
"uart2_0_txd_rxd" "uart" 29, 30
"uart2_0_cts_rts" "uart" 31, 32
"uart2_1_txd_rxd" "uart" 57, 58
"uart2_1_cts_rts" "uart" 59, 60
"watchdog" "watchdog" 11
"wf0_2g" "wifi" 70, 71, 72, 73, 74,
75, 76, 77, 78
"wf0_5g" "wifi" 0, 1, 2, 3, 4, 5, 6,
7, 8, 9, 10
Example:
pio: pinctrl@10211000 {
compatible = "mediatek,mt7622-pinctrl";
reg = <0 0x10211000 0 0x1000>;
gpio-controller;
#gpio-cells = <2>;
pinctrl_eth_default: eth-default {
mux-mdio {
groups = "mdc_mdio";
function = "eth";
drive-strength = <12>;
};
mux-gmac2 {
groups = "gmac2";
function = "eth";
drive-strength = <12>;
};
mux-esw {
groups = "esw";
function = "eth";
drive-strength = <8>;
};
conf-mdio {
pins = "MDC";
bias-pull-up;
};
};
};

132
Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt
Просмотреть файл

@ -1,132 +0,0 @@
* Mediatek MT8183 Pin Controller
The Mediatek's Pin controller is used to control SoC pins.
Required properties:
- compatible: value should be one of the following.
"mediatek,mt8183-pinctrl", compatible with mt8183 pinctrl.
- gpio-controller : Marks the device node as a gpio controller.
- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
binding is used, the amount of cells must be specified as 2. See the below
mentioned gpio binding representation for description of particular cells.
- gpio-ranges : gpio valid number range.
- reg: physical address base for gpio base registers. There are 10 GPIO
physical address base in mt8183.
Optional properties:
- reg-names: gpio base register names. There are 10 gpio base register
names in mt8183. They are "iocfg0", "iocfg1", "iocfg2", "iocfg3", "iocfg4",
"iocfg5", "iocfg6", "iocfg7", "iocfg8", "eint".
- interrupt-controller: Marks the device node as an interrupt controller
- #interrupt-cells: Should be two.
- interrupts : The interrupt outputs to sysirq.
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices.
Subnode format
A pinctrl node should contain at least one subnodes representing the
pinctrl groups available on the machine. Each subnode will list the
pins it needs, and how they should be configured, with regard to muxer
configuration, pullups, drive strength, input enable/disable and input schmitt.
node {
pinmux = <PIN_NUMBER_PINMUX>;
GENERIC_PINCONFIG;
};
Required properties:
- pinmux: integer array, represents gpio pin number and mux setting.
Supported pin number and mux varies for different SoCs, and are defined
as macros in boot/dts/<soc>-pinfunc.h directly.
Optional properties:
- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable,
bias-pull-down, bias-pull-up, input-enable, input-disable, output-low,
output-high, input-schmitt-enable, input-schmitt-disable
and drive-strength are valid.
Some special pins have extra pull up strength, there are R0 and R1 pull-up
resistors available, but for user, it's only need to set R1R0 as 00, 01,
10 or 11. So It needs config "mediatek,pull-up-adv" or
"mediatek,pull-down-adv" to support arguments for those special pins.
Valid arguments are from 0 to 3.
mediatek,tdsel: An integer describing the steps for output level shifter
duty cycle when asserted (high pulse width adjustment). Valid arguments
are from 0 to 15.
mediatek,rdsel: An integer describing the steps for input level shifter
duty cycle when asserted (high pulse width adjustment). Valid arguments
are from 0 to 63.
When config drive-strength, it can support some arguments, such as
MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h.
It can only support 2/4/6/8/10/12/14/16mA in mt8183.
For I2C pins, there are existing generic driving setup and the specific
driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA driving
adjustment in generic driving setup. But in specific driving setup,
they can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
driving setup for I2C pins, the existing generic driving setup will be
disabled. For some special features, we need the I2C pins specific
driving setup. The specific driving setup is controlled by E1E0EN.
So we need add extra vendor driving preperty instead of
the generic driving property.
We can add "mediatek,drive-strength-adv = <XXX>;" to describe the specific
driving setup property. "XXX" means the value of E1E0EN. EN is 0 or 1.
It is used to enable or disable the specific driving setup.
E1E0 is used to describe the detail strength specification of the I2C pin.
When E1=0/E0=0, the strength is 0.125mA.
When E1=0/E0=1, the strength is 0.25mA.
When E1=1/E0=0, the strength is 0.5mA.
When E1=1/E0=1, the strength is 1mA.
So the valid arguments of "mediatek,drive-strength-adv" are from 0 to 7.
Examples:
#include "mt8183-pinfunc.h"
...
{
pio: pinctrl@10005000 {
compatible = "mediatek,mt8183-pinctrl";
reg = <0 0x10005000 0 0x1000>,
<0 0x11f20000 0 0x1000>,
<0 0x11e80000 0 0x1000>,
<0 0x11e70000 0 0x1000>,
<0 0x11e90000 0 0x1000>,
<0 0x11d30000 0 0x1000>,
<0 0x11d20000 0 0x1000>,
<0 0x11c50000 0 0x1000>,
<0 0x11f30000 0 0x1000>,
<0 0x1000b000 0 0x1000>;
reg-names = "iocfg0", "iocfg1", "iocfg2",
"iocfg3", "iocfg4", "iocfg5",
"iocfg6", "iocfg7", "iocfg8",
"eint";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pio 0 0 192>;
interrupt-controller;
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
i2c0_pins_a: i2c0 {
pins1 {
pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
<PINMUX_GPIO49__FUNC_SDA5>;
mediatek,pull-up-adv = <3>;
mediatek,drive-strength-adv = <7>;
};
};
i2c1_pins_a: i2c1 {
pins {
pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
<PINMUX_GPIO51__FUNC_SDA3>;
mediatek,pull-down-adv = <2>;
mediatek,drive-strength-adv = <4>;
};
};
...
};
};

6
MAINTAINERS
Просмотреть файл

@ -14639,8 +14639,10 @@ PIN CONTROLLER - MEDIATEK
M: Sean Wang <sean.wang@kernel.org>
L: linux-mediatek@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
F: Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
F: Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
F: Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
F: Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
F: Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
F: drivers/pinctrl/mediatek/
PIN CONTROLLER - MICROCHIP AT91

2
arch/arm/boot/dts/mt8135.dtsi
Просмотреть файл

@ -9,7 +9,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/mt8135-resets.h>
#include "mt8135-pinfunc.h"
#include <dt-bindings/pinctrl/mt8135-pinfunc.h>
/ {
#address-cells = <2>;

2
arch/arm64/boot/dts/mediatek/mt8183.dtsi
Просмотреть файл

@ -14,7 +14,7 @@
#include <dt-bindings/reset-controller/mt8183-resets.h>
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/thermal/thermal.h>
#include "mt8183-pinfunc.h"
#include <dt-bindings/pinctrl/mt8183-pinfunc.h>
/ {
compatible = "mediatek,mt8183";

0
arch/arm/boot/dts/mt8135-pinfunc.h → include/dt-bindings/pinctrl/mt8135-pinfunc.h
Просмотреть файл

0
arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h → include/dt-bindings/pinctrl/mt8183-pinfunc.h
Просмотреть файл