ARM: S3C24XX: header mach/regs-mem.h local
Since header mach/regs-mem.h is used only into mach-s3c24xx/, this patch moves the header file in local. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This commit is contained in:
Kukjin Kim
Родитель
14cce0e775
Коммит
37c3adca81
|
|
@ -16,11 +16,12 @@
|
|||
#include <linux/io.h>
|
||||
|
||||
#include <mach/map.h>
|
||||
#include <mach/regs-mem.h>
|
||||
#include <mach/regs-clock.h>
|
||||
|
||||
#include <plat/cpu-freq-core.h>
|
||||
|
||||
#include "regs-mem.h"
|
||||
|
||||
/**
|
||||
* s3c2410_cpufreq_setrefresh - set SDRAM refresh value
|
||||
* @cfg: The frequency configuration
|
||||
|
|
|
|||
|
|
@ -27,7 +27,6 @@
|
|||
#include <mach/regs-gpio.h>
|
||||
#include <plat/regs-ac97.h>
|
||||
#include <plat/regs-dma.h>
|
||||
#include <mach/regs-mem.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
#include <mach/regs-sdi.h>
|
||||
#include <plat/regs-iis.h>
|
||||
|
|
|
|||
|
|
@ -27,7 +27,6 @@
|
|||
#include <mach/regs-gpio.h>
|
||||
#include <plat/regs-ac97.h>
|
||||
#include <plat/regs-dma.h>
|
||||
#include <mach/regs-mem.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
#include <mach/regs-sdi.h>
|
||||
#include <plat/regs-iis.h>
|
||||
|
|
|
|||
|
|
@ -27,7 +27,6 @@
|
|||
#include <mach/regs-gpio.h>
|
||||
#include <plat/regs-ac97.h>
|
||||
#include <plat/regs-dma.h>
|
||||
#include <mach/regs-mem.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
#include <mach/regs-sdi.h>
|
||||
#include <plat/regs-iis.h>
|
||||
|
|
|
|||
|
|
@ -27,7 +27,6 @@
|
|||
#include <mach/regs-gpio.h>
|
||||
#include <plat/regs-ac97.h>
|
||||
#include <plat/regs-dma.h>
|
||||
#include <mach/regs-mem.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
#include <mach/regs-sdi.h>
|
||||
#include <plat/regs-iis.h>
|
||||
|
|
|
|||
|
|
@ -1,202 +0,0 @@
|
|||
/* arch/arm/mach-s3c2410/include/mach/regs-mem.h
|
||||
*
|
||||
* Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
|
||||
* http://www.simtec.co.uk/products/SWLINUX/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* S3C2410 Memory Control register definitions
|
||||
*/
|
||||
|
||||
#ifndef __ASM_ARM_MEMREGS_H
|
||||
#define __ASM_ARM_MEMREGS_H
|
||||
|
||||
#ifndef S3C2410_MEMREG
|
||||
#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
|
||||
#endif
|
||||
|
||||
/* bus width, and wait state control */
|
||||
#define S3C2410_BWSCON S3C2410_MEMREG(0x0000)
|
||||
|
||||
/* bank zero config - note, pinstrapped from OM pins! */
|
||||
#define S3C2410_BWSCON_DW0_16 (1<<1)
|
||||
#define S3C2410_BWSCON_DW0_32 (2<<1)
|
||||
|
||||
/* bank one configs */
|
||||
#define S3C2410_BWSCON_DW1_8 (0<<4)
|
||||
#define S3C2410_BWSCON_DW1_16 (1<<4)
|
||||
#define S3C2410_BWSCON_DW1_32 (2<<4)
|
||||
#define S3C2410_BWSCON_WS1 (1<<6)
|
||||
#define S3C2410_BWSCON_ST1 (1<<7)
|
||||
|
||||
/* bank 2 configurations */
|
||||
#define S3C2410_BWSCON_DW2_8 (0<<8)
|
||||
#define S3C2410_BWSCON_DW2_16 (1<<8)
|
||||
#define S3C2410_BWSCON_DW2_32 (2<<8)
|
||||
#define S3C2410_BWSCON_WS2 (1<<10)
|
||||
#define S3C2410_BWSCON_ST2 (1<<11)
|
||||
|
||||
/* bank 3 configurations */
|
||||
#define S3C2410_BWSCON_DW3_8 (0<<12)
|
||||
#define S3C2410_BWSCON_DW3_16 (1<<12)
|
||||
#define S3C2410_BWSCON_DW3_32 (2<<12)
|
||||
#define S3C2410_BWSCON_WS3 (1<<14)
|
||||
#define S3C2410_BWSCON_ST3 (1<<15)
|
||||
|
||||
/* bank 4 configurations */
|
||||
#define S3C2410_BWSCON_DW4_8 (0<<16)
|
||||
#define S3C2410_BWSCON_DW4_16 (1<<16)
|
||||
#define S3C2410_BWSCON_DW4_32 (2<<16)
|
||||
#define S3C2410_BWSCON_WS4 (1<<18)
|
||||
#define S3C2410_BWSCON_ST4 (1<<19)
|
||||
|
||||
/* bank 5 configurations */
|
||||
#define S3C2410_BWSCON_DW5_8 (0<<20)
|
||||
#define S3C2410_BWSCON_DW5_16 (1<<20)
|
||||
#define S3C2410_BWSCON_DW5_32 (2<<20)
|
||||
#define S3C2410_BWSCON_WS5 (1<<22)
|
||||
#define S3C2410_BWSCON_ST5 (1<<23)
|
||||
|
||||
/* bank 6 configurations */
|
||||
#define S3C2410_BWSCON_DW6_8 (0<<24)
|
||||
#define S3C2410_BWSCON_DW6_16 (1<<24)
|
||||
#define S3C2410_BWSCON_DW6_32 (2<<24)
|
||||
#define S3C2410_BWSCON_WS6 (1<<26)
|
||||
#define S3C2410_BWSCON_ST6 (1<<27)
|
||||
|
||||
/* bank 7 configurations */
|
||||
#define S3C2410_BWSCON_DW7_8 (0<<28)
|
||||
#define S3C2410_BWSCON_DW7_16 (1<<28)
|
||||
#define S3C2410_BWSCON_DW7_32 (2<<28)
|
||||
#define S3C2410_BWSCON_WS7 (1<<30)
|
||||
#define S3C2410_BWSCON_ST7 (1<<31)
|
||||
|
||||
/* accesor functions for getting BANK(n) configuration. (n != 0) */
|
||||
|
||||
#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
|
||||
|
||||
#define S3C2410_BWSCON_DW8 (0)
|
||||
#define S3C2410_BWSCON_DW16 (1)
|
||||
#define S3C2410_BWSCON_DW32 (2)
|
||||
#define S3C2410_BWSCON_WS (1 << 2)
|
||||
#define S3C2410_BWSCON_ST (1 << 3)
|
||||
|
||||
/* memory set (rom, ram) */
|
||||
#define S3C2410_BANKCON0 S3C2410_MEMREG(0x0004)
|
||||
#define S3C2410_BANKCON1 S3C2410_MEMREG(0x0008)
|
||||
#define S3C2410_BANKCON2 S3C2410_MEMREG(0x000C)
|
||||
#define S3C2410_BANKCON3 S3C2410_MEMREG(0x0010)
|
||||
#define S3C2410_BANKCON4 S3C2410_MEMREG(0x0014)
|
||||
#define S3C2410_BANKCON5 S3C2410_MEMREG(0x0018)
|
||||
#define S3C2410_BANKCON6 S3C2410_MEMREG(0x001C)
|
||||
#define S3C2410_BANKCON7 S3C2410_MEMREG(0x0020)
|
||||
|
||||
/* bank configuration registers */
|
||||
|
||||
#define S3C2410_BANKCON_PMCnorm (0x00)
|
||||
#define S3C2410_BANKCON_PMC4 (0x01)
|
||||
#define S3C2410_BANKCON_PMC8 (0x02)
|
||||
#define S3C2410_BANKCON_PMC16 (0x03)
|
||||
|
||||
/* bank configurations for banks 0..7, note banks
|
||||
* 6 and 7 have different configurations depending on
|
||||
* the memory type bits */
|
||||
|
||||
#define S3C2410_BANKCON_Tacp2 (0x0 << 2)
|
||||
#define S3C2410_BANKCON_Tacp3 (0x1 << 2)
|
||||
#define S3C2410_BANKCON_Tacp4 (0x2 << 2)
|
||||
#define S3C2410_BANKCON_Tacp6 (0x3 << 2)
|
||||
#define S3C2410_BANKCON_Tacp_SHIFT (2)
|
||||
|
||||
#define S3C2410_BANKCON_Tcah0 (0x0 << 4)
|
||||
#define S3C2410_BANKCON_Tcah1 (0x1 << 4)
|
||||
#define S3C2410_BANKCON_Tcah2 (0x2 << 4)
|
||||
#define S3C2410_BANKCON_Tcah4 (0x3 << 4)
|
||||
#define S3C2410_BANKCON_Tcah_SHIFT (4)
|
||||
|
||||
#define S3C2410_BANKCON_Tcoh0 (0x0 << 6)
|
||||
#define S3C2410_BANKCON_Tcoh1 (0x1 << 6)
|
||||
#define S3C2410_BANKCON_Tcoh2 (0x2 << 6)
|
||||
#define S3C2410_BANKCON_Tcoh4 (0x3 << 6)
|
||||
#define S3C2410_BANKCON_Tcoh_SHIFT (6)
|
||||
|
||||
#define S3C2410_BANKCON_Tacc1 (0x0 << 8)
|
||||
#define S3C2410_BANKCON_Tacc2 (0x1 << 8)
|
||||
#define S3C2410_BANKCON_Tacc3 (0x2 << 8)
|
||||
#define S3C2410_BANKCON_Tacc4 (0x3 << 8)
|
||||
#define S3C2410_BANKCON_Tacc6 (0x4 << 8)
|
||||
#define S3C2410_BANKCON_Tacc8 (0x5 << 8)
|
||||
#define S3C2410_BANKCON_Tacc10 (0x6 << 8)
|
||||
#define S3C2410_BANKCON_Tacc14 (0x7 << 8)
|
||||
#define S3C2410_BANKCON_Tacc_SHIFT (8)
|
||||
|
||||
#define S3C2410_BANKCON_Tcos0 (0x0 << 11)
|
||||
#define S3C2410_BANKCON_Tcos1 (0x1 << 11)
|
||||
#define S3C2410_BANKCON_Tcos2 (0x2 << 11)
|
||||
#define S3C2410_BANKCON_Tcos4 (0x3 << 11)
|
||||
#define S3C2410_BANKCON_Tcos_SHIFT (11)
|
||||
|
||||
#define S3C2410_BANKCON_Tacs0 (0x0 << 13)
|
||||
#define S3C2410_BANKCON_Tacs1 (0x1 << 13)
|
||||
#define S3C2410_BANKCON_Tacs2 (0x2 << 13)
|
||||
#define S3C2410_BANKCON_Tacs4 (0x3 << 13)
|
||||
#define S3C2410_BANKCON_Tacs_SHIFT (13)
|
||||
|
||||
#define S3C2410_BANKCON_SRAM (0x0 << 15)
|
||||
#define S3C2410_BANKCON_SDRAM (0x3 << 15)
|
||||
|
||||
/* next bits only for SDRAM in 6,7 */
|
||||
#define S3C2410_BANKCON_Trcd2 (0x00 << 2)
|
||||
#define S3C2410_BANKCON_Trcd3 (0x01 << 2)
|
||||
#define S3C2410_BANKCON_Trcd4 (0x02 << 2)
|
||||
|
||||
/* control column address select */
|
||||
#define S3C2410_BANKCON_SCANb8 (0x00 << 0)
|
||||
#define S3C2410_BANKCON_SCANb9 (0x01 << 0)
|
||||
#define S3C2410_BANKCON_SCANb10 (0x02 << 0)
|
||||
|
||||
#define S3C2410_REFRESH S3C2410_MEMREG(0x0024)
|
||||
#define S3C2410_BANKSIZE S3C2410_MEMREG(0x0028)
|
||||
#define S3C2410_MRSRB6 S3C2410_MEMREG(0x002C)
|
||||
#define S3C2410_MRSRB7 S3C2410_MEMREG(0x0030)
|
||||
|
||||
/* refresh control */
|
||||
|
||||
#define S3C2410_REFRESH_REFEN (1<<23)
|
||||
#define S3C2410_REFRESH_SELF (1<<22)
|
||||
#define S3C2410_REFRESH_REFCOUNTER ((1<<11)-1)
|
||||
|
||||
#define S3C2410_REFRESH_TRP_MASK (3<<20)
|
||||
#define S3C2410_REFRESH_TRP_2clk (0<<20)
|
||||
#define S3C2410_REFRESH_TRP_3clk (1<<20)
|
||||
#define S3C2410_REFRESH_TRP_4clk (2<<20)
|
||||
|
||||
#define S3C2410_REFRESH_TSRC_MASK (3<<18)
|
||||
#define S3C2410_REFRESH_TSRC_4clk (0<<18)
|
||||
#define S3C2410_REFRESH_TSRC_5clk (1<<18)
|
||||
#define S3C2410_REFRESH_TSRC_6clk (2<<18)
|
||||
#define S3C2410_REFRESH_TSRC_7clk (3<<18)
|
||||
|
||||
|
||||
/* mode select register(s) */
|
||||
|
||||
#define S3C2410_MRSRB_CL1 (0x00 << 4)
|
||||
#define S3C2410_MRSRB_CL2 (0x02 << 4)
|
||||
#define S3C2410_MRSRB_CL3 (0x03 << 4)
|
||||
|
||||
/* bank size register */
|
||||
#define S3C2410_BANKSIZE_128M (0x2 << 0)
|
||||
#define S3C2410_BANKSIZE_64M (0x1 << 0)
|
||||
#define S3C2410_BANKSIZE_32M (0x0 << 0)
|
||||
#define S3C2410_BANKSIZE_16M (0x7 << 0)
|
||||
#define S3C2410_BANKSIZE_8M (0x6 << 0)
|
||||
#define S3C2410_BANKSIZE_4M (0x5 << 0)
|
||||
#define S3C2410_BANKSIZE_2M (0x4 << 0)
|
||||
#define S3C2410_BANKSIZE_MASK (0x7 << 0)
|
||||
#define S3C2410_BANKSIZE_SCLK_EN (1<<4)
|
||||
#define S3C2410_BANKSIZE_SCKE_EN (1<<5)
|
||||
#define S3C2410_BANKSIZE_BURST (1<<7)
|
||||
|
||||
#endif /* __ASM_ARM_MEMREGS_H */
|
||||
|
|
@ -19,11 +19,12 @@
|
|||
#include <linux/slab.h>
|
||||
|
||||
#include <mach/map.h>
|
||||
#include <mach/regs-mem.h>
|
||||
#include <mach/regs-clock.h>
|
||||
|
||||
#include <plat/cpu-freq-core.h>
|
||||
|
||||
#include "regs-mem.h"
|
||||
|
||||
#define print_ns(x) ((x) / 10), ((x) % 10)
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -34,7 +34,6 @@
|
|||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-mem.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
#include <linux/platform_data/mtd-nand-s3c2410.h>
|
||||
#include <linux/platform_data/i2c-s3c2410.h>
|
||||
|
|
|
|||
|
|
@ -35,7 +35,6 @@
|
|||
|
||||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-mem.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
#include <linux/platform_data/mtd-nand-s3c2410.h>
|
||||
#include <linux/platform_data/i2c-s3c2410.h>
|
||||
|
|
|
|||
|
|
@ -48,7 +48,6 @@
|
|||
#include <mach/hardware.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
#include <mach/regs-mem.h>
|
||||
|
||||
#include <plat/clock.h>
|
||||
#include <plat/cpu.h>
|
||||
|
|
|
|||
|
|
@ -75,7 +75,6 @@
|
|||
#include <mach/hardware.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-irq.h>
|
||||
#include <mach/regs-mem.h>
|
||||
|
||||
#include <plat/cpu.h>
|
||||
#include <plat/devs.h>
|
||||
|
|
|
|||
|
|
@ -36,7 +36,6 @@
|
|||
#include <linux/platform_data/i2c-s3c2410.h>
|
||||
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-mem.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
#include <mach/fb.h>
|
||||
|
||||
|
|
|
|||
|
|
@ -40,7 +40,6 @@
|
|||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <linux/platform_data/leds-s3c24xx.h>
|
||||
#include <mach/regs-mem.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
#include <mach/irqs.h>
|
||||
#include <linux/platform_data/mtd-nand-s3c2410.h>
|
||||
|
|
|
|||
|
|
@ -47,11 +47,11 @@
|
|||
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-mem.h>
|
||||
#include <mach/regs-lcd.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "osiris.h"
|
||||
#include "regs-mem.h"
|
||||
|
||||
/* onboard perihperal map */
|
||||
|
||||
|
|
|
|||
|
|
@ -38,7 +38,6 @@
|
|||
#include <plat/regs-serial.h>
|
||||
#include <mach/regs-clock.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-mem.h>
|
||||
#include <mach/regs-irq.h>
|
||||
|
||||
#include <asm/mach/time.h>
|
||||
|
|
@ -46,6 +45,8 @@
|
|||
#include <plat/gpio-cfg.h>
|
||||
#include <plat/pm.h>
|
||||
|
||||
#include "regs-mem.h"
|
||||
|
||||
#define PFX "s3c24xx-pm: "
|
||||
|
||||
static struct sleep_save core_save[] = {
|
||||
|
|
|
|||
|
|
@ -0,0 +1,54 @@
|
|||
/*
|
||||
* Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
|
||||
* http://www.simtec.co.uk/products/SWLINUX/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* S3C2410 Memory Control register definitions
|
||||
*/
|
||||
|
||||
#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H
|
||||
#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__
|
||||
|
||||
#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
|
||||
|
||||
#define S3C2410_BWSCON S3C2410_MEMREG(0x00)
|
||||
#define S3C2410_BANKCON0 S3C2410_MEMREG(0x04)
|
||||
#define S3C2410_BANKCON1 S3C2410_MEMREG(0x08)
|
||||
#define S3C2410_BANKCON2 S3C2410_MEMREG(0x0C)
|
||||
#define S3C2410_BANKCON3 S3C2410_MEMREG(0x10)
|
||||
#define S3C2410_BANKCON4 S3C2410_MEMREG(0x14)
|
||||
#define S3C2410_BANKCON5 S3C2410_MEMREG(0x18)
|
||||
#define S3C2410_BANKCON6 S3C2410_MEMREG(0x1C)
|
||||
#define S3C2410_BANKCON7 S3C2410_MEMREG(0x20)
|
||||
#define S3C2410_REFRESH S3C2410_MEMREG(0x24)
|
||||
#define S3C2410_BANKSIZE S3C2410_MEMREG(0x28)
|
||||
|
||||
#define S3C2410_BWSCON_ST1 (1 << 7)
|
||||
#define S3C2410_BWSCON_ST2 (1 << 11)
|
||||
#define S3C2410_BWSCON_ST3 (1 << 15)
|
||||
#define S3C2410_BWSCON_ST4 (1 << 19)
|
||||
#define S3C2410_BWSCON_ST5 (1 << 23)
|
||||
|
||||
#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
|
||||
|
||||
#define S3C2410_BWSCON_WS (1 << 2)
|
||||
|
||||
#define S3C2410_BANKCON_PMC16 (0x3)
|
||||
|
||||
#define S3C2410_BANKCON_Tacp_SHIFT (2)
|
||||
#define S3C2410_BANKCON_Tcah_SHIFT (4)
|
||||
#define S3C2410_BANKCON_Tcoh_SHIFT (6)
|
||||
#define S3C2410_BANKCON_Tacc_SHIFT (8)
|
||||
#define S3C2410_BANKCON_Tcos_SHIFT (11)
|
||||
#define S3C2410_BANKCON_Tacs_SHIFT (13)
|
||||
|
||||
#define S3C2410_BANKCON_SDRAM (0x3 << 15)
|
||||
|
||||
#define S3C2410_REFRESH_SELF (1 << 22)
|
||||
|
||||
#define S3C2410_BANKSIZE_MASK (0x7 << 0)
|
||||
|
||||
#endif /* __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H */
|
||||
|
|
@ -28,12 +28,13 @@
|
|||
|
||||
#include <mach/map.h>
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-mem.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <plat/pm.h>
|
||||
|
||||
#include "regs-mem.h"
|
||||
|
||||
#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
|
||||
|
||||
/* pm_simtec_init
|
||||
|
|
|
|||
|
|
@ -31,9 +31,10 @@
|
|||
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-clock.h>
|
||||
#include <mach/regs-mem.h>
|
||||
#include <plat/regs-serial.h>
|
||||
|
||||
#include "regs-mem.h"
|
||||
|
||||
/* s3c2410_cpu_suspend
|
||||
*
|
||||
* put the cpu into sleep mode
|
||||
|
|
|
|||
|
|
@ -31,7 +31,6 @@
|
|||
|
||||
#include <mach/regs-gpio.h>
|
||||
#include <mach/regs-clock.h>
|
||||
#include <mach/regs-mem.h>
|
||||
#include <plat/regs-serial.h>
|
||||
|
||||
/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче