power supply and reset changes for the v5.10 series

power-supply core:
  * Add wireless type
  * Properly document current direction
 
 battery/charger driver changes:
  * New fuel-gauge/charger driver for RN5T618/RN5T619
  * New charger driver for BQ25980, BQ25975 and BQ25960
  * bq27xxx-battery: add support for TI bq34z100
  * gpio-charger: convert to GPIO descriptors
  * gpio-charger: add optional support for charge current limiting
  * max17040: add support for max17041, max17043, max17044
  * max17040: add support for max17048, max17049, max17058, max17059
  * smb347-charger: add DT support
  * smb247-charger: add SMB345 and SMB358 support
  * simple-battery: add temperature properties
  * lots of minor fixes, cleanups and DT binding YAML conversions
 
 reset drivers:
  * ocelot: Add support for Sparx5
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAl+IsXoACgkQ2O7X88g7
 +prL8RAAprDcwF5irflM2bWwzKnfuNgTjk6P/o9gIWiSJsNA1R3XKJEm6l38givV
 EhnceGaZXgWg8blh3htd5Z6DNEEFX5ucB9KtQESW5ehM/KGvcEwD7CJilSJejqt4
 3AQiFQLa41s4tnBBao/9gp+juSsvwg2NoeCaOa1H2K5oVi7WDmnmQyexa6CAty7b
 D4Uz8EOfpVi9FvYalffGP7QkA5ZsNWSLRRLJshHCw6QH54+h51F5efhu5S5qxXEA
 L/yjfFFhiB99df7y4LzvCItfaTGLcLNFfCas4+0yOWnViXosIr9rQk51FihXaDot
 DBCyF6hHWFDCnymnjMjWclYeatPFw+jnPrjmn+b0mQ/RaTgz30tgvuZurepcCwN/
 ZKZftnvN16VAnUYgrE397F706sBZHjE6NonWvpXExawNUznA4h2uTu1bwWhtp5Um
 gcIjhL0ePEMf1yAYW3iI/l70NfIgPoEep6w+8oyLgV4vvffkKxkHkndoV7ZcS79M
 OdKbgGq4ZBNTS8ABsjHDO0o+/vBuKa3KE3/2J+916G3mc8FM6WJBfo1mIuwD51GA
 ASwG4UlE1Kyu91z4rP15GGMwSho7UKvWORB5ECsmfZ8xjiJSRHJAiDhmiaSaZZi0
 dc5JKVDdM056IWOuP8THEVG6r3BiG/B1i8eY4YJ6GPv82JP/iks=
 =QtfI
 -----END PGP SIGNATURE-----

Merge tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "Power-supply core:
   - add wireless type
   - properly document current direction

  Battery/charger driver changes:
   - new fuel-gauge/charger driver for RN5T618/RN5T619
   - new charger driver for BQ25980, BQ25975 and BQ25960
   - bq27xxx-battery: add support for TI bq34z100
   - gpio-charger: convert to GPIO descriptors
   - gpio-charger: add optional support for charge current limiting
   - max17040: add support for max17041, max17043, max17044
   - max17040: add support for max17048, max17049, max17058, max17059
   - smb347-charger: add DT support
   - smb247-charger: add SMB345 and SMB358 support
   - simple-battery: add temperature properties
   - lots of minor fixes, cleanups and DT binding YAML conversions

  Reset drivers:
   - ocelot: Add support for Sparx5"

* tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (81 commits)
  power: reset: POWER_RESET_OCELOT_RESET should depend on Ocelot or Sparx5
  power: supply: bq25980: Fix uninitialized wd_reg_val and overrun
  power: supply: ltc2941: Fix ptr to enum cast
  power: supply: test-power: revise parameter printing to use sprintf
  power: supply: charger-manager: fix incorrect check on charging_duration_ms
  power: supply: max17040: Fix ptr to enum cast
  power: supply: bq25980: Fix uninitialized wd_reg_val
  power: supply: bq25980: remove redundant zero check on ret
  power: reset: ocelot: Add support for Sparx5
  dt-bindings: reset: ocelot: Add Sparx5 support
  power: supply: sbs-battery: keep error code when get_property() fails
  power: supply: bq25980: Add support for the BQ259xx family
  dt-binding: bq25980: Add the bq25980 flash charger
  power: supply: fix spelling mistake "unprecise" -> "imprecise"
  power: supply: test_power: add missing newlines when printing parameters by sysfs
  power: supply: pm2301: drop duplicated i2c_device_id
  power: supply: charger-manager: drop unused charger assignment
  power: supply: rt9455: skip 'struct acpi_device_id' when !CONFIG_ACPI
  power: supply: goldfish: skip 'struct acpi_device_id' when !CONFIG_ACPI
  power: supply: bq25890: skip 'struct acpi_device_id' when !CONFIG_ACPI
  ...

Documentation/ABI/testing/sysfs-class-power

@@ -34,7 +34,7 @@ Description:
 		Describes the main type of the supply.
 
 		Access: Read
-		Valid values: "Battery", "UPS", "Mains", "USB"
+		Valid values: "Battery", "UPS", "Mains", "USB", "Wireless"
 
 ===== Battery Properties =====
 
@@ -108,7 +108,8 @@ Description:
 		which they average readings to smooth out the reported value.
 
 		Access: Read
-		Valid values: Represented in microamps
+		Valid values: Represented in microamps. Negative values are used
+		for discharging batteries, positive values for charging batteries.
 
 What:		/sys/class/power_supply/<supply_name>/current_max
 Date:		October 2010
@@ -127,7 +128,8 @@ Description:
 		This value is not averaged/smoothed.
 
 		Access: Read
-		Valid values: Represented in microamps
+		Valid values: Represented in microamps. Negative values are used
+		for discharging batteries, positive values for charging batteries.
 
 What:		/sys/class/power_supply/<supply_name>/charge_control_limit
 Date:		Oct 2012

Documentation/devicetree/bindings/power/reset/ocelot-reset.txt

@@ -1,10 +1,13 @@
 Microsemi Ocelot reset controller
 
 The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the
-SoC MIPS core.
+SoC core.
+
+The reset registers are both present in the MSCC vcoreiii MIPS and
+microchip Sparx5 armv8 SoC's.
 
 Required Properties:
- - compatible: "mscc,ocelot-chip-reset"
+ - compatible: "mscc,ocelot-chip-reset" or "microchip,sparx5-chip-reset"
 
 Example:
 	reset@1070008 {

Documentation/devicetree/bindings/power/reset/reboot-mode.txt

@@ -1,25 +0,0 @@
-Generic reboot mode core map driver
-
-This driver get reboot mode arguments and call the write
-interface to store the magic value in special register
-or ram. Then the bootloader can read it and take different
-action according to the argument stored.
-
-All mode properties are vendor specific, it is a indication to tell
-the bootloader what to do when the system reboots, and should be named
-as mode-xxx = <magic> (xxx is mode name, magic should be a none-zero value).
-
-For example modes common on Android platform:
-- mode-normal: Normal reboot mode, system reboot with command "reboot".
-- mode-recovery: Android Recovery mode, it is a mode to format the device or update a new image.
-- mode-bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device.
-- mode-loader: A bootloader mode, it's a mode used to download image on Rockchip platform,
-	       usually used in development.
-
-Example:
-	reboot-mode {
-		mode-normal = <BOOT_NORMAL>;
-		mode-recovery = <BOOT_RECOVERY>;
-		mode-bootloader = <BOOT_FASTBOOT>;
-		mode-loader = <BOOT_BL_DOWNLOAD>;
-	}

Documentation/devicetree/bindings/power/reset/reboot-mode.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic reboot mode core map
+
+maintainers:
+  - Andy Yan <andy.yan@rock-chips.com>
+
+description: |
+  This driver get reboot mode arguments and call the write
+  interface to store the magic value in special register
+  or ram. Then the bootloader can read it and take different
+  action according to the argument stored.
+
+  All mode properties are vendor specific, it is a indication to tell
+  the bootloader what to do when the system reboots, and should be named
+  as mode-xxx = <magic> (xxx is mode name, magic should be a non-zero value).
+
+  For example, modes common Android platform are:
+    - normal: Normal reboot mode, system reboot with command "reboot".
+    - recovery: Android Recovery mode, it is a mode to format the device or update a new image.
+    - bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device.
+    - loader: A bootloader mode, it's a mode used to download image on Rockchip platform,
+              usually used in development.
+
+properties:
+  mode-normal:
+      $ref: /schemas/types.yaml#/definitions/uint32
+      description: |
+        Default value to set on a reboot if no command was provided.
+
+patternProperties:
+  "^mode-.*$":
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+examples:
+  - |
+    reboot-mode {
+      mode-normal = <0>;
+      mode-recovery = <1>;
+      mode-bootloader = <2>;
+      mode-loader = <3>;
+    };
+...

Documentation/devicetree/bindings/power/supply/battery.yaml

@@ -82,6 +82,27 @@ properties:
       An array containing the temperature in degree Celsius,
       for each of the battery capacity lookup table.
 
+  operating-range-celsius:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: operating temperature range of a battery
+    items:
+      - description: minimum temperature at which battery can operate
+      - description: maximum temperature at which battery can operate
+
+  ambient-celsius:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: safe range of ambient temperature
+    items:
+      - description: alert when ambient temperature is lower than this value
+      - description: alert when ambient temperature is higher than this value
+
+  alert-celsius:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: safe range of battery temperature
+    items:
+      - description: alert when battery temperature is lower than this value
+      - description: alert when battery temperature is higher than this value
+
 required:
   - compatible
 
@@ -130,6 +151,9 @@ examples:
         /* table for 10 degree Celsius */
         ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>;
         resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
+        operating-range-celsius = <(-30) 50>;
+        ambient-celsius = <(-5) 50>;
+        alert-celsius = <0 40>;
       };
 
       charger@11 {

Documentation/devicetree/bindings/power/supply/bq25890.txt

@@ -33,6 +33,10 @@ Optional properties:
 - ti,thermal-regulation-threshold: integer, temperature above which the charge
     current is lowered, to avoid overheating (in degrees Celsius). If omitted,
     the default setting will be used (120 degrees);
+- ti,ibatcomp-micro-ohms: integer, value of a resistor in series with
+    the battery;
+- ti,ibatcomp-clamp-microvolt: integer, maximum charging voltage adjustment due
+    to expected voltage drop on in-series resistor;
 
 Example:
 

Documentation/devicetree/bindings/power/supply/bq25980.yaml

@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/bq25980.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI BQ25980 Flash Charger
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+  - Ricardo Rivera-Matos <r-rivera-matos@ti.com>
+
+description: |
+  The BQ25980, BQ25975, and BQ25960 are a series of flash chargers intended
+  for use in high-power density portable electronics. These inductorless
+  switching chargers can provide over 97% efficiency by making use of the
+  switched capacitor architecture.
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq25980
+      - ti,bq25975
+      - ti,bq25960
+
+  reg:
+    maxItems: 1
+
+  ti,watchdog-timeout-ms:
+    description: |
+      Watchdog timer in milli seconds. 0 disables the watchdog.
+    default: 0
+    minimum: 0
+    maximum: 300000
+    enum: [ 0, 5000, 10000, 50000, 300000]
+
+  ti,sc-ovp-limit-microvolt:
+    description: |
+      Minimum input voltage limit in micro volts with a when the charger is in
+      switch cap mode. 100000 micro volt step.
+    default: 17800000
+    minimum: 14000000
+    maximum: 22000000
+
+  ti,sc-ocp-limit-microamp:
+    description: |
+      Maximum input current limit in micro amps with a 100000 micro amp step.
+    minimum: 100000
+    maximum: 3300000
+
+  ti,bypass-ovp-limit-microvolt:
+    description: |
+      Minimum input voltage limit in micro volts with a when the charger is in
+      switch cap mode. 50000 micro volt step.
+    minimum: 7000000
+    maximum: 12750000
+
+  ti,bypass-ocp-limit-microamp:
+    description: |
+      Maximum input current limit in micro amps with a 100000 micro amp step.
+    minimum: 100000
+    maximum: 3300000
+
+  ti,bypass-enable:
+    type: boolean
+    description: Enables bypass mode at boot time
+
+  interrupts:
+    description: |
+      Indicates that the device state has changed.
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the battery node being monitored
+
+required:
+  - compatible
+  - reg
+  - monitored-battery
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bat: battery {
+      compatible = "simple-battery";
+      constant-charge-current-max-microamp = <4000000>;
+      constant-charge-voltage-max-microvolt = <8400000>;
+      precharge-current-microamp = <160000>;
+      charge-term-current-microamp = <160000>;
+    };
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bq25980: charger@65 {
+          compatible = "ti,bq25980";
+          reg = <0x65>;
+          interrupt-parent = <&gpio1>;
+          interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+          ti,watchdog-timer = <0>;
+          ti,sc-ocp-limit-microamp = <2000000>;
+          ti,sc-ovp-limit-microvolt = <17800000>;
+          monitored-battery = <&bat>;
+      };
+    };
+
+...

Documentation/devicetree/bindings/power/supply/bq27xxx.yaml

@@ -51,6 +51,7 @@ properties:
       - ti,bq27621
       - ti,bq27z561
       - ti,bq28z610
+      - ti,bq34z100
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/power/supply/charger-manager.txt

@@ -3,24 +3,32 @@ charger-manager bindings
 
 Required properties :
  - compatible : "charger-manager"
- - <>-supply : for regulator consumer
- - cm-num-chargers : number of chargers
+ - <>-supply : for regulator consumer, named according to cm-regulator-name
  - cm-chargers : name of chargers
  - cm-fuel-gauge : name of battery fuel gauge
  - subnode <regulator> :
 	- cm-regulator-name : name of charger regulator
 	- subnode <cable> :
-		- cm-cable-name : name of charger cable
+		- cm-cable-name : name of charger cable - one of USB, USB-HOST,
+			SDP, DCP, CDP, ACA, FAST-CHARGER, SLOW-CHARGER, WPT,
+			PD, DOCK, JIG, or MECHANICAL
 		- cm-cable-extcon : name of extcon dev
 (optional)	- cm-cable-min : minimum current of cable
 (optional)	- cm-cable-max : maximum current of cable
 
 Optional properties :
  - cm-name : charger manager's name (default : "battery")
- - cm-poll-mode : polling mode (enum polling_modes)
- - cm-poll-interval : polling interval
- - cm-battery-stat : battery status (enum data_source)
- - cm-fullbatt-* : data for full battery checking
+ - cm-poll-mode : polling mode - 0 for disabled, 1 for always, 2 for when
+	external power is connected, or 3 for when charging.  If not present,
+	then polling is disabled
+ - cm-poll-interval : polling interval (in ms)
+ - cm-battery-stat : battery status - 0 for battery always present, 1 for no
+	battery, 2 to check presence via fuel gauge, or 3 to check presence
+	via charger
+ - cm-fullbatt-vchkdrop-volt : voltage drop (in uV) before restarting charging
+ - cm-fullbatt-voltage : voltage (in uV) of full battery
+ - cm-fullbatt-soc : state of charge to consider as full battery
+ - cm-fullbatt-capacity : capcity (in uAh) to consider as full battery
  - cm-thermal-zone : name of external thermometer's thermal zone
  - cm-battery-* : threshold battery temperature for charging
 	-cold : critical cold temperature of battery for charging
@@ -29,6 +37,10 @@ Optional properties :
 	-temp-diff : temperature difference to allow recharging
  - cm-dis/charging-max = limits of charging duration
 
+Deprecated properties:
+ - cm-num-chargers
+ - cm-fullbatt-vchkdrop-ms
+
 Example :
 	charger-manager@0 {
 		compatible = "charger-manager";
@@ -39,13 +51,11 @@ Example :
 		cm-poll-mode = <1>;
 		cm-poll-interval = <30000>;
 
-		cm-fullbatt-vchkdrop-ms = <30000>;
 		cm-fullbatt-vchkdrop-volt = <150000>;
 		cm-fullbatt-soc = <100>;
 
 		cm-battery-stat = <3>;
 
-		cm-num-chargers = <3>;
 		cm-chargers = "charger0", "charger1", "charger2";
 
 		cm-fuel-gauge = "fuelgauge0";
@@ -71,7 +81,7 @@ Example :
 				cm-cable-max = <500000>;
 			};
 			cable@1 {
-				cm-cable-name = "TA";
+				cm-cable-name = "SDP";
 				cm-cable-extcon = "extcon-dev.0";
 				cm-cable-min = <650000>;
 				cm-cable-max = <675000>;

Documentation/devicetree/bindings/power/supply/gpio-charger.yaml

@@ -39,6 +39,25 @@ properties:
     maxItems: 1
     description: GPIO indicating the charging status
 
+  charge-current-limit-gpios:
+    minItems: 1
+    maxItems: 32
+    description: GPIOs used for current limiting
+
+  charge-current-limit-mapping:
+    description: List of tuples with current in uA and a GPIO bitmap (in
+      this order). The tuples must be provided in descending order of the
+      current limit.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description:
+            Current limit in uA
+        - description:
+            Encoded GPIO setting. Bit 0 represents last GPIO from the
+            charge-current-limit-gpios property. Bit 1 second to last
+            GPIO and so on.
+
 required:
   - compatible
 
@@ -47,6 +66,12 @@ anyOf:
       - gpios
   - required:
       - charge-status-gpios
+  - required:
+      - charge-current-limit-gpios
+
+dependencies:
+  charge-current-limit-gpios: [ charge-current-limit-mapping ]
+  charge-current-limit-mapping: [ charge-current-limit-gpios ]
 
 additionalProperties: false
 
@@ -60,4 +85,10 @@ examples:
 
       gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
       charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
+
+      charge-current-limit-gpios = <&gpioA 11 GPIO_ACTIVE_HIGH>,
+                                   <&gpioA 12 GPIO_ACTIVE_HIGH>;
+      charge-current-limit-mapping = <2500000 0x00>, // 2.5 A => both GPIOs low
+                                     <700000 0x01>, // 700 mA => GPIO A.12 high
+                                     <0 0x02>; // 0 mA => GPIO A.11 high
     };

Documentation/devicetree/bindings/power/supply/ingenic,battery.txt

@@ -1,31 +0,0 @@
-* Ingenic JZ47xx battery bindings
-
-Required properties:
-
-- compatible: Must be "ingenic,jz4740-battery".
-- io-channels: phandle and IIO specifier pair to the IIO device.
-  Format described in iio-bindings.txt.
-- monitored-battery: phandle to a "simple-battery" compatible node.
-
-The "monitored-battery" property must be a phandle to a node using the format
-described in battery.txt, with the following properties being required:
-
-- voltage-min-design-microvolt: Drained battery voltage.
-- voltage-max-design-microvolt: Fully charged battery voltage.
-
-Example:
-
-#include <dt-bindings/iio/adc/ingenic,adc.h>
-
-simple_battery: battery {
-	compatible = "simple-battery";
-	voltage-min-design-microvolt = <3600000>;
-	voltage-max-design-microvolt = <4200000>;
-};
-
-ingenic_battery {
-	compatible = "ingenic,jz4740-battery";
-	io-channels = <&adc INGENIC_ADC_BATTERY>;
-	io-channel-names = "battery";
-	monitored-battery = <&simple_battery>;
-};

Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/ingenic,battery.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Ingenic JZ47xx battery bindings
+
+maintainers:
+  - Artur Rojek <contact@artur-rojek.eu>
+
+properties:
+  compatible:
+    oneOf:
+      - const: ingenic,jz4740-battery
+      - items:
+        - enum:
+          - ingenic,jz4725b-battery
+          - ingenic,jz4770-battery
+        - const: ingenic,jz4740-battery
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    const: battery
+
+  monitored-battery:
+    description: >
+      phandle to a "simple-battery" compatible node.
+
+      This property must be a phandle to a node using the format described
+      in battery.yaml, with the following properties being required:
+      - voltage-min-design-microvolt: drained battery voltage,
+      - voltage-max-design-microvolt: fully charged battery voltage.
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/adc/ingenic,adc.h>
+
+    simple_battery: battery {
+            compatible = "simple-battery";
+            voltage-min-design-microvolt = <3600000>;
+            voltage-max-design-microvolt = <4200000>;
+    };
+
+    ingenic-battery {
+            compatible = "ingenic,jz4740-battery";
+            io-channels = <&adc INGENIC_ADC_BATTERY>;
+            io-channel-names = "battery";
+            monitored-battery = <&simple_battery>;
+    };

Documentation/devicetree/bindings/power/supply/max17040_battery.txt

@@ -2,7 +2,9 @@ max17040_battery
 ~~~~~~~~~~~~~~~~
 
 Required properties :
- - compatible : "maxim,max17040" or "maxim,max77836-battery"
+ - compatible : "maxim,max17040", "maxim,max17041", "maxim,max17043",
+		"maxim,max17044", "maxim,max17048", "maxim,max17049",
+		"maxim,max17058", "maxim,max17059" or "maxim,max77836-battery"
  - reg: i2c slave address
 
 Optional properties :
@@ -11,6 +13,15 @@ Optional properties :
 				generated. Can be configured from 1 up to 32
 				(%). If skipped the power up default value of
 				4 (%) will be used.
+- maxim,double-soc : 		Certain devices return double the capacity.
+				Specify this boolean property to divide the
+				reported value in 2 and thus normalize it.
+				SOC == State of Charge == Capacity.
+- maxim,rcomp :			A value to compensate readings for various
+				battery chemistries and operating temperatures.
+				max17040,41 have 2 byte rcomp, default to
+				0x97 0x00. All other devices have one byte
+				rcomp, default to 0x97.
 - interrupts : 			Interrupt line see Documentation/devicetree/
 				bindings/interrupt-controller/interrupts.txt
 - wakeup-source :		This device has wakeup capabilities. Use this
@@ -31,3 +42,11 @@ Example:
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 		wakeup-source;
 	};
+
+	battery-fuel-gauge@36 {
+		compatible = "maxim,max17048";
+		reg = <0x36>;
+		maxim,rcomp = /bits/ 8 <0x56>;
+		maxim,alert-low-soc-level = <10>;
+		maxim,double-soc;
+	};

Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml

@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/summit,smb347-charger.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Battery charger driver for SMB345, SMB347 and SMB358
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+  - Dmitry Osipenko <digetx@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - summit,smb345
+      - summit,smb347
+      - summit,smb358
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  monitored-battery:
+    description: phandle to the battery node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  summit,enable-usb-charging:
+    type: boolean
+    description: Enable charging through USB.
+
+  summit,enable-otg-charging:
+    type: boolean
+    description: Provide power for USB OTG
+
+  summit,enable-mains-charging:
+    type: boolean
+    description: Enable charging through mains
+
+  summit,enable-charge-control:
+    description: Enable charging control
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_CHG_ENABLE_SW SW (I2C interface)
+      - 1 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW Pin control (Active Low)
+      - 2 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH Pin control (Active High)
+
+  summit,fast-voltage-threshold-microvolt:
+    description: Voltage threshold to transit to fast charge mode (in uV)
+    minimum: 2400000
+    maximum: 3000000
+
+  summit,mains-current-limit-microamp:
+    description: Maximum input current from AC/DC input (in uA)
+
+  summit,usb-current-limit-microamp:
+    description: Maximum input current from USB input (in uA)
+
+  summit,charge-current-compensation-microamp:
+    description: Charge current compensation (in uA)
+
+  summit,chip-temperature-threshold-celsius:
+    description: Chip temperature for thermal regulation in °C.
+    enum: [100, 110, 120, 130]
+
+  summit,soft-compensation-method:
+    description: Soft temperature limit compensation method
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # SMB3XX_SOFT_TEMP_COMPENSATE_NONE Compensation none
+      - 1 # SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT Current compensation
+      - 2 # SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE Voltage compensation
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - summit,smb345
+            - summit,smb358
+
+    then:
+      properties:
+        summit,mains-current-limit-microamp:
+          enum: [ 300000,  500000,  700000, 1000000,
+                 1500000, 1800000, 2000000]
+
+        summit,usb-current-limit-microamp:
+          enum: [ 300000,  500000,  700000, 1000000,
+                 1500000, 1800000, 2000000]
+
+        summit,charge-current-compensation-microamp:
+          enum: [200000, 450000, 600000, 900000]
+
+    else:
+      properties:
+        summit,mains-current-limit-microamp:
+          enum: [ 300000,  500000,  700000,  900000, 1200000,
+                 1500000, 1800000, 2000000, 2200000, 2500000]
+
+        summit,usb-current-limit-microamp:
+          enum: [ 300000,  500000,  700000,  900000, 1200000,
+                 1500000, 1800000, 2000000, 2200000, 2500000]
+
+        summit,charge-current-compensation-microamp:
+          enum: [250000, 700000, 900000, 1200000]
+
+required:
+  - compatible
+  - reg
+
+anyOf:
+  - required:
+      - summit,enable-usb-charging
+  - required:
+      - summit,enable-otg-charging
+  - required:
+      - summit,enable-mains-charging
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/power/summit,smb347-charger.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        charger@7f {
+            compatible = "summit,smb347";
+            reg = <0x7f>;
+
+            summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH>;
+            summit,chip-temperature-threshold-celsius = <110>;
+            summit,mains-current-limit-microamp = <2000000>;
+            summit,usb-current-limit-microamp = <500000>;
+            summit,enable-usb-charging;
+            summit,enable-mains-charging;
+
+            monitored-battery = <&battery>;
+        };
+    };
+
+    battery: battery-cell {
+        compatible = "simple-battery";
+        constant-charge-current-max-microamp = <1800000>;
+        operating-range-celsius = <0 45>;
+        alert-celsius = <3 42>;
+    };

MAINTAINERS

@@ -5231,7 +5231,6 @@ F:	kernel/dma/
 
 DMA-BUF HEAPS FRAMEWORK
 M:	Sumit Semwal <sumit.semwal@linaro.org>
-R:	Andrew F. Davis <afd@ti.com>
 R:	Benjamin Gaignard <benjamin.gaignard@linaro.org>
 R:	Liam Mark <lmark@codeaurora.org>
 R:	Laura Abbott <labbott@redhat.com>
@@ -11605,6 +11604,7 @@ M:	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
 L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/mips/mscc.txt
+F:	Documentation/devicetree/bindings/power/reset/ocelot-reset.txt
 F:	arch/mips/boot/dts/mscc/
 F:	arch/mips/configs/generic/board-ocelot.config
 F:	arch/mips/generic/board-ocelot.c
@@ -17391,7 +17391,7 @@ S:	Maintained
 F:	drivers/thermal/ti-soc-thermal/
 
 TI BQ27XXX POWER SUPPLY DRIVER
-R:	Andrew F. Davis <afd@ti.com>
+R:	Dan Murphy <dmurphy@ti.com>
 F:	drivers/power/supply/bq27xxx_battery.c
 F:	drivers/power/supply/bq27xxx_battery_i2c.c
 F:	include/linux/power/bq27xxx_battery.h

arch/arm/mach-pxa/tosa.c

@@ -369,6 +369,15 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = {
 /*
  * Tosa AC IN
  */
+static struct gpiod_lookup_table tosa_power_gpiod_table = {
+	.dev_id = "gpio-charger",
+	.table = {
+		GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_AC_IN,
+			    NULL, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static char *tosa_ac_supplied_to[] = {
 	"main-battery",
 	"backup-battery",
@@ -378,8 +387,6 @@ static char *tosa_ac_supplied_to[] = {
 static struct gpio_charger_platform_data tosa_power_data = {
 	.name			= "charger",
 	.type			= POWER_SUPPLY_TYPE_MAINS,
-	.gpio			= TOSA_GPIO_AC_IN,
-	.gpio_active_low	= 1,
 	.supplied_to		= tosa_ac_supplied_to,
 	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
 };
@@ -951,6 +958,7 @@ static void __init tosa_init(void)
 	clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
 
 	gpiod_add_lookup_table(&tosa_udc_gpiod_table);
+	gpiod_add_lookup_table(&tosa_power_gpiod_table);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 

arch/arm/mach-sa1100/collie.c

@@ -30,6 +30,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/power/gpio-charger.h>
 
 #include <video/sa1100fb.h>
@@ -131,16 +132,23 @@ static struct irda_platform_data collie_ir_data = {
 /*
  * Collie AC IN
  */
+static struct gpiod_lookup_table collie_power_gpiod_table = {
+	.dev_id = "gpio-charger",
+	.table = {
+		GPIO_LOOKUP("gpio", COLLIE_GPIO_AC_IN,
+			    NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static char *collie_ac_supplied_to[] = {
 	"main-battery",
 	"backup-battery",
 };
 
-
 static struct gpio_charger_platform_data collie_power_data = {
 	.name			= "charger",
 	.type			= POWER_SUPPLY_TYPE_MAINS,
-	.gpio			= COLLIE_GPIO_AC_IN,
 	.supplied_to		= collie_ac_supplied_to,
 	.num_supplicants	= ARRAY_SIZE(collie_ac_supplied_to),
 };
@@ -386,6 +394,8 @@ static void __init collie_init(void)
 
 	platform_scoop_config = &collie_pcmcia_config;
 
+	gpiod_add_lookup_table(&collie_power_gpiod_table);
+
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	if (ret) {
 		printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");

drivers/power/reset/Kconfig

@@ -129,10 +129,10 @@ config POWER_RESET_QCOM_PON
 
 config POWER_RESET_OCELOT_RESET
 	bool "Microsemi Ocelot reset driver"
-	depends on MSCC_OCELOT || COMPILE_TEST
+	depends on MSCC_OCELOT || ARCH_SPARX5 || COMPILE_TEST
 	select MFD_SYSCON
 	help
-	  This driver supports restart for Microsemi Ocelot SoC.
+	  This driver supports restart for Microsemi Ocelot SoC and similar.
 
 config POWER_RESET_OXNAS
 	bool "OXNAS SoC restart driver"

drivers/power/reset/ocelot-reset.c

@@ -15,15 +15,20 @@
 #include <linux/reboot.h>
 #include <linux/regmap.h>
 
+struct reset_props {
+	const char *syscon;
+	u32 protect_reg;
+	u32 vcore_protect;
+	u32 if_si_owner_bit;
+};
+
 struct ocelot_reset_context {
 	void __iomem *base;
 	struct regmap *cpu_ctrl;
+	const struct reset_props *props;
 	struct notifier_block restart_handler;
 };
 
-#define ICPU_CFG_CPU_SYSTEM_CTRL_RESET 0x20
-#define CORE_RST_PROTECT BIT(2)
-
 #define SOFT_CHIP_RST BIT(0)
 
 #define ICPU_CFG_CPU_SYSTEM_CTRL_GENERAL_CTRL	0x24
@@ -31,7 +36,6 @@ struct ocelot_reset_context {
 #define IF_SI_OWNER_SISL			0
 #define IF_SI_OWNER_SIBM			1
 #define IF_SI_OWNER_SIMC			2
-#define IF_SI_OWNER_OFFSET			4
 
 static int ocelot_restart_handle(struct notifier_block *this,
 				 unsigned long mode, void *cmd)
@@ -39,15 +43,18 @@ static int ocelot_restart_handle(struct notifier_block *this,
 	struct ocelot_reset_context *ctx = container_of(this, struct
 							ocelot_reset_context,
 							restart_handler);
+	u32 if_si_owner_bit = ctx->props->if_si_owner_bit;
 
 	/* Make sure the core is not protected from reset */
-	regmap_update_bits(ctx->cpu_ctrl, ICPU_CFG_CPU_SYSTEM_CTRL_RESET,
-			   CORE_RST_PROTECT, 0);
+	regmap_update_bits(ctx->cpu_ctrl, ctx->props->protect_reg,
+			   ctx->props->vcore_protect, 0);
 
 	/* Make the SI back to boot mode */
 	regmap_update_bits(ctx->cpu_ctrl, ICPU_CFG_CPU_SYSTEM_CTRL_GENERAL_CTRL,
-			   IF_SI_OWNER_MASK << IF_SI_OWNER_OFFSET,
-			   IF_SI_OWNER_SIBM << IF_SI_OWNER_OFFSET);
+			   IF_SI_OWNER_MASK << if_si_owner_bit,
+			   IF_SI_OWNER_SIBM << if_si_owner_bit);
+
+	pr_emerg("Resetting SoC\n");
 
 	writel(SOFT_CHIP_RST, ctx->base);
 
@@ -72,9 +79,13 @@ static int ocelot_reset_probe(struct platform_device *pdev)
 	if (IS_ERR(ctx->base))
 		return PTR_ERR(ctx->base);
 
-	ctx->cpu_ctrl = syscon_regmap_lookup_by_compatible("mscc,ocelot-cpu-syscon");
-	if (IS_ERR(ctx->cpu_ctrl))
+	ctx->props = device_get_match_data(dev);
+
+	ctx->cpu_ctrl = syscon_regmap_lookup_by_compatible(ctx->props->syscon);
+	if (IS_ERR(ctx->cpu_ctrl)) {
+		dev_err(dev, "No syscon map: %s\n", ctx->props->syscon);
 		return PTR_ERR(ctx->cpu_ctrl);
+	}
 
 	ctx->restart_handler.notifier_call = ocelot_restart_handle;
 	ctx->restart_handler.priority = 192;
@@ -85,9 +96,29 @@ static int ocelot_reset_probe(struct platform_device *pdev)
 	return err;
 }
 
+static const struct reset_props reset_props_ocelot = {
+	.syscon		 = "mscc,ocelot-cpu-syscon",
+	.protect_reg     = 0x20,
+	.vcore_protect   = BIT(2),
+	.if_si_owner_bit = 4,
+};
+
+static const struct reset_props reset_props_sparx5 = {
+	.syscon		 = "microchip,sparx5-cpu-syscon",
+	.protect_reg     = 0x84,
+	.vcore_protect   = BIT(10),
+	.if_si_owner_bit = 6,
+};
+
 static const struct of_device_id ocelot_reset_of_match[] = {
-	{ .compatible = "mscc,ocelot-chip-reset" },
-	{}
+	{
+		.compatible = "mscc,ocelot-chip-reset",
+		.data = &reset_props_ocelot
+	}, {
+		.compatible = "microchip,sparx5-chip-reset",
+		.data = &reset_props_sparx5
+	},
+	{ /*sentinel*/ }
 };
 
 static struct platform_driver ocelot_reset_driver = {

drivers/power/supply/Kconfig

@@ -164,7 +164,7 @@ config BATTERY_DS2782
 
 config BATTERY_LEGO_EV3
 	tristate "LEGO MINDSTORMS EV3 battery"
-	depends on OF && IIO && GPIOLIB
+	depends on OF && IIO && GPIOLIB && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
 	help
 	  Say Y here to enable support for the LEGO MINDSTORMS EV3 battery.
 
@@ -367,10 +367,15 @@ config AXP288_FUEL_GAUGE
 config BATTERY_MAX17040
 	tristate "Maxim MAX17040 Fuel Gauge"
 	depends on I2C
+	select REGMAP_I2C
 	help
-	  MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries
-	  in handheld and portable equipment. The MAX17040 is configured
-	  to operate with a single lithium cell
+	  Maxim models with ModelGauge are fuel-gauge systems for lithium-ion
+	  (Li+) batteries in handheld and portable equipment, including
+	  max17040, max17041, max17043, max17044, max17048, max17049, max17058,
+	  max17059. It is also included in some batteries like max77836.
+
+	  Driver supports reporting SOC (State of Charge, i.e capacity),
+	  voltage and configurable low-SOC wakeup interrupt.
 
 config BATTERY_MAX17042
 	tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
@@ -631,13 +636,22 @@ config CHARGER_BQ25890
 	help
 	  Say Y to enable support for the TI BQ25890 battery charger.
 
+config CHARGER_BQ25980
+	tristate "TI BQ25980 battery charger driver"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select REGMAP_I2C
+	help
+	  Say Y to enable support for the TI BQ25980, BQ25975 and BQ25960
+	  series of fast battery chargers.
+
 config CHARGER_SMB347
-	tristate "Summit Microelectronics SMB347 Battery Charger"
+	tristate "Summit Microelectronics SMB3XX Battery Charger"
 	depends on I2C
 	select REGMAP_I2C
 	help
-	  Say Y to include support for Summit Microelectronics SMB347
-	  Battery Charger.
+	  Say Y to include support for Summit Microelectronics SMB345,
+	  SMB347 or SMB358 Battery Charger.
 
 config CHARGER_TPS65090
 	tristate "TPS65090 battery charger driver"
@@ -752,4 +766,12 @@ config CHARGER_WILCO
 	  information can be found in
 	  Documentation/ABI/testing/sysfs-class-power-wilco
 
+config RN5T618_POWER
+	tristate "RN5T618 charger/fuel gauge support"
+	depends on MFD_RN5T618
+	help
+	  Say Y here to have support for RN5T618 PMIC family fuel gauge and charger.
+	  This driver can also be built as a module. If so, the module will be
+	  called rn5t618_power.
+
 endif # POWER_SUPPLY

drivers/power/supply/Makefile

@@ -84,6 +84,7 @@ obj-$(CONFIG_CHARGER_BQ24257)	+= bq24257_charger.o
 obj-$(CONFIG_CHARGER_BQ24735)	+= bq24735-charger.o
 obj-$(CONFIG_CHARGER_BQ2515X)	+= bq2515x_charger.o
 obj-$(CONFIG_CHARGER_BQ25890)	+= bq25890_charger.o
+obj-$(CONFIG_CHARGER_BQ25980)	+= bq25980_charger.o
 obj-$(CONFIG_CHARGER_SMB347)	+= smb347-charger.o
 obj-$(CONFIG_CHARGER_TPS65090)	+= tps65090-charger.o
 obj-$(CONFIG_CHARGER_TPS65217)	+= tps65217_charger.o
@@ -96,3 +97,4 @@ obj-$(CONFIG_CHARGER_UCS1002)	+= ucs1002_power.o
 obj-$(CONFIG_CHARGER_BD70528)	+= bd70528-charger.o
 obj-$(CONFIG_CHARGER_BD99954)	+= bd99954-charger.o
 obj-$(CONFIG_CHARGER_WILCO)	+= wilco-charger.o
+obj-$(CONFIG_RN5T618_POWER)	+= rn5t618_power.o

drivers/power/supply/ab8500_fg.c

@@ -653,7 +653,7 @@ int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
 
 	/*
 	 * negative value for Discharging
-	 * convert 2's compliment into decimal
+	 * convert 2's complement into decimal
 	 */
 	if (high & 0x10)
 		val = (low | (high << 8) | 0xFFFFE000);
@@ -781,7 +781,7 @@ static void ab8500_fg_acc_cur_work(struct work_struct *work)
 	if (ret < 0)
 		goto exit;
 
-	/* Check for sign bit in case of negative value, 2's compliment */
+	/* Check for sign bit in case of negative value, 2's complement */
 	if (high & 0x10)
 		val = (low | (med << 8) | (high << 16) | 0xFFE00000);
 	else

drivers/power/supply/bq24257_charger.c

@@ -1152,6 +1152,7 @@ static const struct of_device_id bq24257_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, bq24257_of_match);
 
+#ifdef CONFIG_ACPI
 static const struct acpi_device_id bq24257_acpi_match[] = {
 	{ "BQ242500", BQ24250 },
 	{ "BQ242510", BQ24251 },
@@ -1159,6 +1160,7 @@ static const struct acpi_device_id bq24257_acpi_match[] = {
 	{},
 };
 MODULE_DEVICE_TABLE(acpi, bq24257_acpi_match);
+#endif
 
 static struct i2c_driver bq24257_driver = {
 	.driver = {

drivers/power/supply/bq2515x_charger.c

@@ -168,7 +168,7 @@ enum bq2515x_id {
  * @device_id: value of device_id
  * @mains_online: boolean value indicating power supply online
  *
- * @bq2515x_init_data init_data: charger initialization data structure
+ * @init_data: charger initialization data structure
  */
 struct bq2515x_device {
 	struct power_supply *mains;
@@ -188,7 +188,7 @@ struct bq2515x_device {
 	struct bq2515x_init_data init_data;
 };
 
-static struct reg_default bq25150_reg_defaults[] = {
+static const struct reg_default bq25150_reg_defaults[] = {
 	{BQ2515X_FLAG0, 0x0},
 	{BQ2515X_FLAG1, 0x0},
 	{BQ2515X_FLAG2, 0x0},
@@ -227,7 +227,7 @@ static struct reg_default bq25150_reg_defaults[] = {
 	{BQ2515X_DEVICE_ID, 0x20},
 };
 
-static struct reg_default bq25155_reg_defaults[] = {
+static const struct reg_default bq25155_reg_defaults[] = {
 	{BQ2515X_FLAG0, 0x0},
 	{BQ2515X_FLAG1, 0x0},
 	{BQ2515X_FLAG2, 0x0},
@@ -886,14 +886,14 @@ static int bq2515x_battery_get_property(struct power_supply *psy,
 	return 0;
 }
 
-static enum power_supply_property bq2515x_battery_properties[] = {
+static const enum power_supply_property bq2515x_battery_properties[] = {
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CURRENT_NOW,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
 };
 
-static enum power_supply_property bq2515x_mains_properties[] = {
+static const enum power_supply_property bq2515x_mains_properties[] = {
 	POWER_SUPPLY_PROP_ONLINE,
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_HEALTH,
@@ -905,7 +905,7 @@ static enum power_supply_property bq2515x_mains_properties[] = {
 	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
 };
 
-static struct power_supply_desc bq2515x_mains_desc = {
+static const struct power_supply_desc bq2515x_mains_desc = {
 	.name			= "bq2515x-mains",
 	.type			= POWER_SUPPLY_TYPE_MAINS,
 	.get_property		= bq2515x_mains_get_property,
@@ -915,7 +915,7 @@ static struct power_supply_desc bq2515x_mains_desc = {
 	.property_is_writeable	= bq2515x_power_supply_property_is_writeable,
 };
 
-static struct power_supply_desc bq2515x_battery_desc = {
+static const struct power_supply_desc bq2515x_battery_desc = {
 	.name			= "bq2515x-battery",
 	.type			= POWER_SUPPLY_TYPE_BATTERY,
 	.get_property		= bq2515x_battery_get_property,

drivers/power/supply/bq25890_charger.c

@@ -83,6 +83,8 @@ struct bq25890_init_data {
 	u8 boostf;	/* boost frequency		*/
 	u8 ilim_en;	/* enable ILIM pin		*/
 	u8 treg;	/* thermal regulation threshold */
+	u8 rbatcomp;	/* IBAT sense resistor value    */
+	u8 vclamp;	/* IBAT compensation voltage limit */
 };
 
 struct bq25890_state {
@@ -258,6 +260,8 @@ enum bq25890_table_ids {
 	TBL_VREG,
 	TBL_BOOSTV,
 	TBL_SYSVMIN,
+	TBL_VBATCOMP,
+	TBL_RBATCOMP,
 
 	/* lookup tables */
 	TBL_TREG,
@@ -299,6 +303,8 @@ static const union {
 	[TBL_VREG] =	{ .rt = {3840000, 4608000, 16000} },	 /* uV */
 	[TBL_BOOSTV] =	{ .rt = {4550000, 5510000, 64000} },	 /* uV */
 	[TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} },	 /* uV */
+	[TBL_VBATCOMP] ={ .rt = {0,        224000, 32000} },	 /* uV */
+	[TBL_RBATCOMP] ={ .rt = {0,        140000, 20000} },	 /* uOhm */
 
 	/* lookup tables */
 	[TBL_TREG] =	{ .lt = {bq25890_treg_tbl, BQ25890_TREG_TBL_SIZE} },
@@ -648,7 +654,9 @@ static int bq25890_hw_init(struct bq25890_device *bq)
 		{F_BOOSTI,	 bq->init_data.boosti},
 		{F_BOOSTF,	 bq->init_data.boostf},
 		{F_EN_ILIM,	 bq->init_data.ilim_en},
-		{F_TREG,	 bq->init_data.treg}
+		{F_TREG,	 bq->init_data.treg},
+		{F_BATCMP,	 bq->init_data.rbatcomp},
+		{F_VCLAMP,	 bq->init_data.vclamp},
 	};
 
 	ret = bq25890_chip_reset(bq);
@@ -859,11 +867,14 @@ static int bq25890_fw_read_u32_props(struct bq25890_device *bq)
 		{"ti,boost-max-current", false, TBL_BOOSTI, &init->boosti},
 
 		/* optional properties */
-		{"ti,thermal-regulation-threshold", true, TBL_TREG, &init->treg}
+		{"ti,thermal-regulation-threshold", true, TBL_TREG, &init->treg},
+		{"ti,ibatcomp-micro-ohms", true, TBL_RBATCOMP, &init->rbatcomp},
+		{"ti,ibatcomp-clamp-microvolt", true, TBL_VBATCOMP, &init->vclamp},
 	};
 
 	/* initialize data for optional properties */
 	init->treg = 3; /* 120 degrees Celsius */
+	init->rbatcomp = init->vclamp = 0; /* IBAT compensation disabled */
 
 	for (i = 0; i < ARRAY_SIZE(props); i++) {
 		ret = device_property_read_u32(bq->dev, props[i].name,
@@ -1073,11 +1084,13 @@ static const struct of_device_id bq25890_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, bq25890_of_match);
 
+#ifdef CONFIG_ACPI
 static const struct acpi_device_id bq25890_acpi_match[] = {
 	{"BQ258900", 0},
 	{},
 };
 MODULE_DEVICE_TABLE(acpi, bq25890_acpi_match);
+#endif
 
 static struct i2c_driver bq25890_driver = {
 	.driver = {

drivers/power/supply/bq25980_charger.h

@@ -0,0 +1,178 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ */
+
+#ifndef BQ25980_CHARGER_H
+#define BQ25980_CHARGER_H
+
+#define BQ25980_MANUFACTURER "Texas Instruments"
+
+#define BQ25980_BATOVP			0x0
+#define BQ25980_BATOVP_ALM		0x1
+#define BQ25980_BATOCP			0x2
+#define BQ25980_BATOCP_ALM		0x3
+#define BQ25980_BATUCP_ALM		0x4
+#define BQ25980_CHRGR_CTRL_1	0x5
+#define BQ25980_BUSOVP			0x6
+#define BQ25980_BUSOVP_ALM		0x7
+#define BQ25980_BUSOCP			0x8
+#define BQ25980_BUSOCP_ALM		0x9
+#define BQ25980_TEMP_CONTROL		0xA
+#define BQ25980_TDIE_ALM		0xB
+#define BQ25980_TSBUS_FLT		0xC
+#define BQ25980_TSBAT_FLG		0xD
+#define BQ25980_VAC_CONTROL		0xE
+#define BQ25980_CHRGR_CTRL_2	0xF
+#define BQ25980_CHRGR_CTRL_3	0x10
+#define BQ25980_CHRGR_CTRL_4	0x11
+#define BQ25980_CHRGR_CTRL_5	0x12
+#define BQ25980_STAT1			0x13
+#define BQ25980_STAT2			0x14
+#define BQ25980_STAT3			0x15
+#define BQ25980_STAT4			0x16
+#define BQ25980_STAT5			0x17
+#define BQ25980_FLAG1			0x18
+#define BQ25980_FLAG2			0x19
+#define BQ25980_FLAG3			0x1A
+#define BQ25980_FLAG4			0x1B
+#define BQ25980_FLAG5			0x1C
+#define BQ25980_MASK1			0x1D
+#define BQ25980_MASK2			0x1E
+#define BQ25980_MASK3			0x1F
+#define BQ25980_MASK4			0x20
+#define BQ25980_MASK5			0x21
+#define BQ25980_DEVICE_INFO		0x22
+#define BQ25980_ADC_CONTROL1		0x23
+#define BQ25980_ADC_CONTROL2		0x24
+#define BQ25980_IBUS_ADC_MSB		0x25
+#define BQ25980_IBUS_ADC_LSB		0x26
+#define BQ25980_VBUS_ADC_MSB		0x27
+#define BQ25980_VBUS_ADC_LSB		0x28
+#define BQ25980_VAC1_ADC_MSB		0x29
+#define BQ25980_VAC1_ADC_LSB		0x2A
+#define BQ25980_VAC2_ADC_MSB		0x2B
+#define BQ25980_VAC2_ADC_LSB		0x2C
+#define BQ25980_VOUT_ADC_MSB		0x2D
+#define BQ25980_VOUT_ADC_LSB		0x2E
+#define BQ25980_VBAT_ADC_MSB		0x2F
+#define BQ25980_VBAT_ADC_LSB		0x30
+#define BQ25980_IBAT_ADC_MSB		0x31
+#define BQ25980_IBAT_ADC_LSB		0x32
+#define BQ25980_TSBUS_ADC_MSB		0x33
+#define BQ25980_TSBUS_ADC_LSB		0x34
+#define BQ25980_TSBAT_ADC_MSB		0x35
+#define BQ25980_TSBAT_ADC_LSB		0x36
+#define BQ25980_TDIE_ADC_MSB		0x37
+#define BQ25980_TDIE_ADC_LSB		0x38
+#define BQ25980_DEGLITCH_TIME		0x39
+#define BQ25980_CHRGR_CTRL_6	0x3A
+
+#define BQ25980_BUSOCP_STEP_uA		250000
+#define BQ25980_BUSOCP_OFFSET_uA	1000000
+
+#define BQ25980_BUSOCP_DFLT_uA		4250000
+#define BQ25975_BUSOCP_DFLT_uA		4250000
+#define BQ25960_BUSOCP_DFLT_uA		3250000
+
+#define BQ25980_BUSOCP_MIN_uA		1000000
+
+#define BQ25980_BUSOCP_SC_MAX_uA	5750000
+#define BQ25975_BUSOCP_SC_MAX_uA	5750000
+#define BQ25960_BUSOCP_SC_MAX_uA	3750000
+
+#define BQ25980_BUSOCP_BYP_MAX_uA	8500000
+#define BQ25975_BUSOCP_BYP_MAX_uA	8500000
+#define BQ25960_BUSOCP_BYP_MAX_uA	5750000
+
+#define BQ25980_BUSOVP_SC_STEP_uV	100000
+#define BQ25975_BUSOVP_SC_STEP_uV	50000
+#define BQ25960_BUSOVP_SC_STEP_uV	50000
+#define BQ25980_BUSOVP_SC_OFFSET_uV	14000000
+#define BQ25975_BUSOVP_SC_OFFSET_uV	7000000
+#define BQ25960_BUSOVP_SC_OFFSET_uV	7000000
+
+#define BQ25980_BUSOVP_BYP_STEP_uV	50000
+#define BQ25975_BUSOVP_BYP_STEP_uV	25000
+#define BQ25960_BUSOVP_BYP_STEP_uV	25000
+#define BQ25980_BUSOVP_BYP_OFFSET_uV	7000000
+#define BQ25975_BUSOVP_BYP_OFFSET_uV	3500000
+#define BQ25960_BUSOVP_BYP_OFFSET_uV	3500000
+
+#define BQ25980_BUSOVP_DFLT_uV		17800000
+#define BQ25980_BUSOVP_BYPASS_DFLT_uV	8900000
+#define BQ25975_BUSOVP_DFLT_uV		8900000
+#define BQ25975_BUSOVP_BYPASS_DFLT_uV	4450000
+#define BQ25960_BUSOVP_DFLT_uV		8900000
+
+#define BQ25980_BUSOVP_SC_MIN_uV	14000000
+#define BQ25975_BUSOVP_SC_MIN_uV	7000000
+#define BQ25960_BUSOVP_SC_MIN_uV	7000000
+#define BQ25980_BUSOVP_BYP_MIN_uV	7000000
+#define BQ25975_BUSOVP_BYP_MIN_uV	3500000
+#define BQ25960_BUSOVP_BYP_MIN_uV	3500000
+
+#define BQ25980_BUSOVP_SC_MAX_uV	22000000
+#define BQ25975_BUSOVP_SC_MAX_uV	12750000
+#define BQ25960_BUSOVP_SC_MAX_uV	12750000
+
+#define BQ25980_BUSOVP_BYP_MAX_uV	12750000
+#define BQ25975_BUSOVP_BYP_MAX_uV	6500000
+#define BQ25960_BUSOVP_BYP_MAX_uV	6500000
+
+#define BQ25980_BATOVP_STEP_uV		20000
+#define BQ25975_BATOVP_STEP_uV		10000
+#define BQ25960_BATOVP_STEP_uV		10000
+
+#define BQ25980_BATOVP_OFFSET_uV	7000000
+#define BQ25975_BATOVP_OFFSET_uV	3500000
+#define BQ25960_BATOVP_OFFSET_uV	3500000
+
+#define BQ25980_BATOVP_DFLT_uV		14000000
+#define BQ25975_BATOVP_DFLT_uV		8900000
+#define BQ25960_BATOVP_DFLT_uV		8900000
+
+#define BQ25980_BATOVP_MIN_uV		7000000
+#define BQ25975_BATOVP_MIN_uV		3500000
+#define BQ25960_BATOVP_MIN_uV		3500000
+
+#define BQ25980_BATOVP_MAX_uV		9540000
+#define BQ25975_BATOVP_MAX_uV		4770000
+#define BQ25960_BATOVP_MAX_uV		4770000
+
+#define BQ25980_BATOCP_STEP_uA		100000
+
+#define BQ25980_BATOCP_MASK		GENMASK(6, 0)
+
+#define BQ25980_BATOCP_DFLT_uA		8100000
+#define BQ25960_BATOCP_DFLT_uA		6100000
+
+#define BQ25980_BATOCP_MIN_uA		2000000
+
+#define BQ25980_BATOCP_MAX_uA		11000000
+#define BQ25975_BATOCP_MAX_uA		11000000
+#define BQ25960_BATOCP_MAX_uA		7000000
+
+#define BQ25980_ENABLE_HIZ		0xff
+#define BQ25980_DISABLE_HIZ		0x0
+#define BQ25980_EN_BYPASS		BIT(3)
+#define BQ25980_STAT1_OVP_MASK		(BIT(6) | BIT(5) | BIT(0))
+#define BQ25980_STAT3_OVP_MASK		(BIT(7) | BIT(6))
+#define BQ25980_STAT1_OCP_MASK		BIT(3)
+#define BQ25980_STAT2_OCP_MASK		(BIT(6) | BIT(1))
+#define BQ25980_STAT4_TFLT_MASK		GENMASK(5, 1)
+#define BQ25980_WD_STAT			BIT(0)
+#define BQ25980_PRESENT_MASK		GENMASK(4, 2)
+#define BQ25980_CHG_EN			BIT(4)
+#define BQ25980_EN_HIZ			BIT(6)
+#define BQ25980_ADC_EN			BIT(7)
+
+#define BQ25980_ADC_VOLT_STEP_uV        1000
+#define BQ25980_ADC_CURR_STEP_uA        1000
+#define BQ25980_ADC_POLARITY_BIT	BIT(7)
+
+#define BQ25980_WATCHDOG_MASK	GENMASK(4, 3)
+#define BQ25980_WATCHDOG_DIS	BIT(2)
+#define BQ25980_WATCHDOG_MAX	300000
+#define BQ25980_WATCHDOG_MIN	0
+#define BQ25980_NUM_WD_VAL	4
+
+#endif /* BQ25980_CHARGER_H */

drivers/power/supply/bq27xxx_battery.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * BQ27xxx battery driver
  *
@@ -9,14 +10,6 @@
  *
  * Based on a previous work by Copyright (C) 2008 Texas Instruments, Inc.
  *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
  * Datasheets:
  * https://www.ti.com/product/bq27000
  * https://www.ti.com/product/bq27200
@@ -45,6 +38,7 @@
  * https://www.ti.com/product/bq27621-g1
  * https://www.ti.com/product/bq27z561
  * https://www.ti.com/product/bq28z610
+ * https://www.ti.com/product/bq34z100-g1
  */
 
 #include <linux/device.h>
@@ -83,7 +77,7 @@
 
 /* BQ27Z561 has different layout for Flags register */
 #define BQ27Z561_FLAG_FDC	BIT(4) /* Battery fully discharged */
-#define BQ27Z561_FLAG_FC		BIT(5) /* Battery fully charged */
+#define BQ27Z561_FLAG_FC	BIT(5) /* Battery fully charged */
 #define BQ27Z561_FLAG_DIS_CH	BIT(6) /* Battery is discharging */
 
 /* control register params */
@@ -483,6 +477,26 @@ static u8
 		[BQ27XXX_REG_DCAP] = 0x3c,
 		[BQ27XXX_REG_AP] = 0x22,
 		BQ27XXX_DM_REG_ROWS,
+	},
+	bq34z100_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x0c,
+		[BQ27XXX_REG_INT_TEMP] = 0x2a,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x0a,
+		[BQ27XXX_REG_FLAGS] = 0x0e,
+		[BQ27XXX_REG_TTE] = 0x18,
+		[BQ27XXX_REG_TTF] = 0x1a,
+		[BQ27XXX_REG_TTES] = 0x1e,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_FCC] = 0x06,
+		[BQ27XXX_REG_CYCT] = 0x2c,
+		[BQ27XXX_REG_AE] = 0x24,
+		[BQ27XXX_REG_SOC] = 0x02,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x22,
+		BQ27XXX_DM_REG_ROWS,
 	};
 
 static enum power_supply_property bq27000_props[] = {
@@ -757,6 +771,27 @@ static enum power_supply_property bq28z610_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
+static enum power_supply_property bq34z100_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
 struct bq27xxx_dm_reg {
 	u8 subclass_id;
 	u8 offset;
@@ -854,13 +889,17 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
 
 #define bq27z561_dm_regs 0
 #define bq28z610_dm_regs 0
+#define bq34z100_dm_regs 0
 
-#define BQ27XXX_O_ZERO	0x00000001
-#define BQ27XXX_O_OTDC	0x00000002 /* has OTC/OTD overtemperature flags */
-#define BQ27XXX_O_UTOT  0x00000004 /* has OT overtemperature flag */
-#define BQ27XXX_O_CFGUP	0x00000008
-#define BQ27XXX_O_RAM	0x00000010
-#define BQ27Z561_O_BITS	0x00000020
+#define BQ27XXX_O_ZERO		BIT(0)
+#define BQ27XXX_O_OTDC		BIT(1) /* has OTC/OTD overtemperature flags */
+#define BQ27XXX_O_UTOT		BIT(2) /* has OT overtemperature flag */
+#define BQ27XXX_O_CFGUP		BIT(3)
+#define BQ27XXX_O_RAM		BIT(4)
+#define BQ27Z561_O_BITS		BIT(5)
+#define BQ27XXX_O_SOC_SI	BIT(6) /* SoC is single register */
+#define BQ27XXX_O_HAS_CI	BIT(7) /* has Capacity Inaccurate flag */
+#define BQ27XXX_O_MUL_CHEM	BIT(8) /* multiple chemistries supported */
 
 #define BQ27XXX_DATA(ref, key, opt) {		\
 	.opts = (opt),				\
@@ -878,8 +917,8 @@ static struct {
 	enum power_supply_property *props;
 	size_t props_size;
 } bq27xxx_chip_data[] = {
-	[BQ27000]   = BQ27XXX_DATA(bq27000,   0         , BQ27XXX_O_ZERO),
-	[BQ27010]   = BQ27XXX_DATA(bq27010,   0         , BQ27XXX_O_ZERO),
+	[BQ27000]   = BQ27XXX_DATA(bq27000,   0         , BQ27XXX_O_ZERO | BQ27XXX_O_SOC_SI | BQ27XXX_O_HAS_CI),
+	[BQ27010]   = BQ27XXX_DATA(bq27010,   0         , BQ27XXX_O_ZERO | BQ27XXX_O_SOC_SI | BQ27XXX_O_HAS_CI),
 	[BQ2750X]   = BQ27XXX_DATA(bq2750x,   0         , BQ27XXX_O_OTDC),
 	[BQ2751X]   = BQ27XXX_DATA(bq2751x,   0         , BQ27XXX_O_OTDC),
 	[BQ2752X]   = BQ27XXX_DATA(bq2752x,   0         , BQ27XXX_O_OTDC),
@@ -907,6 +946,8 @@ static struct {
 	[BQ27621]   = BQ27XXX_DATA(bq27621,   0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
 	[BQ27Z561]  = BQ27XXX_DATA(bq27z561,  0         , BQ27Z561_O_BITS),
 	[BQ28Z610]  = BQ27XXX_DATA(bq28z610,  0         , BQ27Z561_O_BITS),
+	[BQ34Z100]  = BQ27XXX_DATA(bq34z100,  0         , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \
+							  BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM),
 };
 
 static DEFINE_MUTEX(bq27xxx_list_lock);
@@ -1426,7 +1467,7 @@ static int bq27xxx_battery_read_soc(struct bq27xxx_device_info *di)
 {
 	int soc;
 
-	if (di->opts & BQ27XXX_O_ZERO)
+	if (di->opts & BQ27XXX_O_SOC_SI)
 		soc = bq27xxx_read(di, BQ27XXX_REG_SOC, true);
 	else
 		soc = bq27xxx_read(di, BQ27XXX_REG_SOC, false);
@@ -1664,7 +1705,7 @@ static int bq27xxx_battery_read_health(struct bq27xxx_device_info *di)
 void bq27xxx_battery_update(struct bq27xxx_device_info *di)
 {
 	struct bq27xxx_reg_cache cache = {0, };
-	bool has_ci_flag = di->opts & BQ27XXX_O_ZERO;
+	bool has_ci_flag = di->opts & BQ27XXX_O_HAS_CI;
 	bool has_singe_flag = di->opts & BQ27XXX_O_ZERO;
 
 	cache.flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, has_singe_flag);
@@ -1772,8 +1813,6 @@ static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
 			status = POWER_SUPPLY_STATUS_FULL;
 		else if (di->cache.flags & BQ27000_FLAG_CHGS)
 			status = POWER_SUPPLY_STATUS_CHARGING;
-		else if (power_supply_am_i_supplied(di->bat) > 0)
-			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		else
 			status = POWER_SUPPLY_STATUS_DISCHARGING;
 	} else if (di->opts & BQ27Z561_O_BITS) {
@@ -1792,6 +1831,10 @@ static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
 			status = POWER_SUPPLY_STATUS_CHARGING;
 	}
 
+	if ((status == POWER_SUPPLY_STATUS_DISCHARGING) &&
+	    (power_supply_am_i_supplied(di->bat) > 0))
+		status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
 	val->intval = status;
 
 	return 0;
@@ -1916,7 +1959,10 @@ static int bq27xxx_battery_get_property(struct power_supply *psy,
 		ret = bq27xxx_simple_value(di->cache.time_to_full, val);
 		break;
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
-		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		if (di->opts & BQ27XXX_O_MUL_CHEM)
+			val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+		else
+			val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
 		break;
 	case POWER_SUPPLY_PROP_CHARGE_NOW:
 		ret = bq27xxx_simple_value(bq27xxx_battery_read_nac(di), val);
@@ -1992,13 +2038,9 @@ int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
 	psy_desc->external_power_changed = bq27xxx_external_power_changed;
 
 	di->bat = power_supply_register_no_ws(di->dev, psy_desc, &psy_cfg);
-	if (IS_ERR(di->bat)) {
-		if (PTR_ERR(di->bat) == -EPROBE_DEFER)
-			dev_dbg(di->dev, "failed to register battery, deferring probe\n");
-		else
-			dev_err(di->dev, "failed to register battery\n");
-		return PTR_ERR(di->bat);
-	}
+	if (IS_ERR(di->bat))
+		return dev_err_probe(di->dev, PTR_ERR(di->bat),
+				     "failed to register battery\n");
 
 	bq27xxx_battery_settings(di);
 	bq27xxx_battery_update(di);

drivers/power/supply/bq27xxx_battery_hdq.c

@@ -1,16 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * BQ27xxx battery monitor HDQ/1-wire driver
  *
  * Copyright (C) 2007-2017 Texas Instruments Incorporated - https://www.ti.com/
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>

drivers/power/supply/bq27xxx_battery_i2c.c

@@ -1,17 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * BQ27xxx battery monitor I2C driver
  *
  * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/
  *	Andrew F. Davis <afd@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/i2c.h>
@@ -255,6 +247,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27621", BQ27621 },
 	{ "bq27z561", BQ27Z561 },
 	{ "bq28z610", BQ28Z610 },
+	{ "bq34z100", BQ34Z100 },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
@@ -290,6 +283,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
 	{ .compatible = "ti,bq27621" },
 	{ .compatible = "ti,bq27z561" },
 	{ .compatible = "ti,bq28z610" },
+	{ .compatible = "ti,bq34z100" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table);

drivers/power/supply/charger-manager.c

@@ -26,6 +26,29 @@
 #include <linux/of.h>
 #include <linux/thermal.h>
 
+static struct {
+	const char *name;
+	u64 extcon_type;
+} extcon_mapping[] = {
+	/* Current textual representations */
+	{ "USB", EXTCON_USB },
+	{ "USB-HOST", EXTCON_USB_HOST },
+	{ "SDP", EXTCON_CHG_USB_SDP },
+	{ "DCP", EXTCON_CHG_USB_DCP },
+	{ "CDP", EXTCON_CHG_USB_CDP },
+	{ "ACA", EXTCON_CHG_USB_ACA },
+	{ "FAST-CHARGER", EXTCON_CHG_USB_FAST },
+	{ "SLOW-CHARGER", EXTCON_CHG_USB_SLOW },
+	{ "WPT", EXTCON_CHG_WPT },
+	{ "PD", EXTCON_CHG_USB_PD },
+	{ "DOCK", EXTCON_DOCK },
+	{ "JIG", EXTCON_JIG },
+	{ "MECHANICAL", EXTCON_MECHANICAL },
+	/* Deprecated textual representations */
+	{ "TA", EXTCON_CHG_USB_SDP },
+	{ "CHARGE-DOWNSTREAM", EXTCON_CHG_USB_CDP },
+};
+
 /*
  * Default temperature threshold for charging.
  * Every temperature units are in tenth of centigrade.
@@ -33,18 +56,6 @@
 #define CM_DEFAULT_RECHARGE_TEMP_DIFF	50
 #define CM_DEFAULT_CHARGE_TEMP_MAX	500
 
-static const char * const default_event_names[] = {
-	[CM_EVENT_UNKNOWN] = "Unknown",
-	[CM_EVENT_BATT_FULL] = "Battery Full",
-	[CM_EVENT_BATT_IN] = "Battery Inserted",
-	[CM_EVENT_BATT_OUT] = "Battery Pulled Out",
-	[CM_EVENT_BATT_OVERHEAT] = "Battery Overheat",
-	[CM_EVENT_BATT_COLD] = "Battery Cold",
-	[CM_EVENT_EXT_PWR_IN_OUT] = "External Power Attach/Detach",
-	[CM_EVENT_CHG_START_STOP] = "Charging Start/Stop",
-	[CM_EVENT_OTHERS] = "Other battery events"
-};
-
 /*
  * Regard CM_JIFFIES_SMALL jiffies is small enough to ignore for
  * delayed works so that we can run delayed works with CM_JIFFIES_SMALL
@@ -61,8 +72,6 @@ static const char * const default_event_names[] = {
  */
 #define CM_RTC_SMALL		(2)
 
-#define UEVENT_BUF_SIZE		32
-
 static LIST_HEAD(cm_list);
 static DEFINE_MUTEX(cm_list_mtx);
 
@@ -285,6 +294,19 @@ static bool is_full_charged(struct charger_manager *cm)
 	if (!fuel_gauge)
 		return false;
 
+	/* Full, if it's over the fullbatt voltage */
+	if (desc->fullbatt_uV > 0) {
+		ret = get_batt_uV(cm, &uV);
+		if (!ret) {
+			/* Battery is already full, checks voltage drop. */
+			if (cm->battery_status == POWER_SUPPLY_STATUS_FULL
+					&& desc->fullbatt_vchkdrop_uV)
+				uV += desc->fullbatt_vchkdrop_uV;
+			if (uV >= desc->fullbatt_uV)
+				return true;
+		}
+	}
+
 	if (desc->fullbatt_full_capacity > 0) {
 		val.intval = 0;
 
@@ -297,15 +319,6 @@ static bool is_full_charged(struct charger_manager *cm)
 		}
 	}
 
-	/* Full, if it's over the fullbatt voltage */
-	if (desc->fullbatt_uV > 0) {
-		ret = get_batt_uV(cm, &uV);
-		if (!ret && uV >= desc->fullbatt_uV) {
-			is_full = true;
-			goto out;
-		}
-	}
-
 	/* Full, if the capacity is more than fullbatt_soc */
 	if (desc->fullbatt_soc > 0) {
 		val.intval = 0;
@@ -426,122 +439,6 @@ static int try_charger_enable(struct charger_manager *cm, bool enable)
 	return err;
 }
 
-/**
- * try_charger_restart - Restart charging.
- * @cm: the Charger Manager representing the battery.
- *
- * Restart charging by turning off and on the charger.
- */
-static int try_charger_restart(struct charger_manager *cm)
-{
-	int err;
-
-	if (cm->emergency_stop)
-		return -EAGAIN;
-
-	err = try_charger_enable(cm, false);
-	if (err)
-		return err;
-
-	return try_charger_enable(cm, true);
-}
-
-/**
- * uevent_notify - Let users know something has changed.
- * @cm: the Charger Manager representing the battery.
- * @event: the event string.
- *
- * If @event is null, it implies that uevent_notify is called
- * by resume function. When called in the resume function, cm_suspended
- * should be already reset to false in order to let uevent_notify
- * notify the recent event during the suspend to users. While
- * suspended, uevent_notify does not notify users, but tracks
- * events so that uevent_notify can notify users later after resumed.
- */
-static void uevent_notify(struct charger_manager *cm, const char *event)
-{
-	static char env_str[UEVENT_BUF_SIZE + 1] = "";
-	static char env_str_save[UEVENT_BUF_SIZE + 1] = "";
-
-	if (cm_suspended) {
-		/* Nothing in suspended-event buffer */
-		if (env_str_save[0] == 0) {
-			if (!strncmp(env_str, event, UEVENT_BUF_SIZE))
-				return; /* status not changed */
-			strncpy(env_str_save, event, UEVENT_BUF_SIZE);
-			return;
-		}
-
-		if (!strncmp(env_str_save, event, UEVENT_BUF_SIZE))
-			return; /* Duplicated. */
-		strncpy(env_str_save, event, UEVENT_BUF_SIZE);
-		return;
-	}
-
-	if (event == NULL) {
-		/* No messages pending */
-		if (!env_str_save[0])
-			return;
-
-		strncpy(env_str, env_str_save, UEVENT_BUF_SIZE);
-		kobject_uevent(&cm->dev->kobj, KOBJ_CHANGE);
-		env_str_save[0] = 0;
-
-		return;
-	}
-
-	/* status not changed */
-	if (!strncmp(env_str, event, UEVENT_BUF_SIZE))
-		return;
-
-	/* save the status and notify the update */
-	strncpy(env_str, event, UEVENT_BUF_SIZE);
-	kobject_uevent(&cm->dev->kobj, KOBJ_CHANGE);
-
-	dev_info(cm->dev, "%s\n", event);
-}
-
-/**
- * fullbatt_vchk - Check voltage drop some times after "FULL" event.
- * @work: the work_struct appointing the function
- *
- * If a user has designated "fullbatt_vchkdrop_ms/uV" values with
- * charger_desc, Charger Manager checks voltage drop after the battery
- * "FULL" event. It checks whether the voltage has dropped more than
- * fullbatt_vchkdrop_uV by calling this function after fullbatt_vchkrop_ms.
- */
-static void fullbatt_vchk(struct work_struct *work)
-{
-	struct delayed_work *dwork = to_delayed_work(work);
-	struct charger_manager *cm = container_of(dwork,
-			struct charger_manager, fullbatt_vchk_work);
-	struct charger_desc *desc = cm->desc;
-	int batt_uV, err, diff;
-
-	/* remove the appointment for fullbatt_vchk */
-	cm->fullbatt_vchk_jiffies_at = 0;
-
-	if (!desc->fullbatt_vchkdrop_uV || !desc->fullbatt_vchkdrop_ms)
-		return;
-
-	err = get_batt_uV(cm, &batt_uV);
-	if (err) {
-		dev_err(cm->dev, "%s: get_batt_uV error(%d)\n", __func__, err);
-		return;
-	}
-
-	diff = desc->fullbatt_uV - batt_uV;
-	if (diff < 0)
-		return;
-
-	dev_info(cm->dev, "VBATT dropped %duV after full-batt\n", diff);
-
-	if (diff > desc->fullbatt_vchkdrop_uV) {
-		try_charger_restart(cm);
-		uevent_notify(cm, "Recharging");
-	}
-}
-
 /**
  * check_charging_duration - Monitor charging/discharging duration
  * @cm: the Charger Manager representing the battery.
@@ -569,19 +466,14 @@ static int check_charging_duration(struct charger_manager *cm)
 		if (duration > desc->charging_max_duration_ms) {
 			dev_info(cm->dev, "Charging duration exceed %ums\n",
 				 desc->charging_max_duration_ms);
-			uevent_notify(cm, "Discharging");
-			try_charger_enable(cm, false);
 			ret = true;
 		}
-	} else if (is_ext_pwr_online(cm) && !cm->charger_enabled) {
+	} else if (cm->battery_status == POWER_SUPPLY_STATUS_NOT_CHARGING) {
 		duration = curr - cm->charging_end_time;
 
-		if (duration > desc->discharging_max_duration_ms &&
-				is_ext_pwr_online(cm)) {
+		if (duration > desc->discharging_max_duration_ms) {
 			dev_info(cm->dev, "Discharging duration exceed %ums\n",
 				 desc->discharging_max_duration_ms);
-			uevent_notify(cm, "Recharging");
-			try_charger_enable(cm, true);
 			ret = true;
 		}
 	}
@@ -657,13 +549,52 @@ static int cm_check_thermal_status(struct charger_manager *cm)
 	}
 
 	if (temp > upper_limit)
-		ret = CM_EVENT_BATT_OVERHEAT;
+		ret = CM_BATT_OVERHEAT;
 	else if (temp < lower_limit)
-		ret = CM_EVENT_BATT_COLD;
+		ret = CM_BATT_COLD;
+	else
+		ret = CM_BATT_OK;
+
+	cm->emergency_stop = ret;
 
 	return ret;
 }
 
+/**
+ * cm_get_target_status - Check current status and get next target status.
+ * @cm: the Charger Manager representing the battery.
+ */
+static int cm_get_target_status(struct charger_manager *cm)
+{
+	if (!is_ext_pwr_online(cm))
+		return POWER_SUPPLY_STATUS_DISCHARGING;
+
+	if (cm_check_thermal_status(cm)) {
+		/* Check if discharging duration exeeds limit. */
+		if (check_charging_duration(cm))
+			goto charging_ok;
+		return POWER_SUPPLY_STATUS_NOT_CHARGING;
+	}
+
+	switch (cm->battery_status) {
+	case POWER_SUPPLY_STATUS_CHARGING:
+		/* Check if charging duration exeeds limit. */
+		if (check_charging_duration(cm))
+			return POWER_SUPPLY_STATUS_FULL;
+		fallthrough;
+	case POWER_SUPPLY_STATUS_FULL:
+		if (is_full_charged(cm))
+			return POWER_SUPPLY_STATUS_FULL;
+		fallthrough;
+	default:
+		break;
+	}
+
+charging_ok:
+	/* Charging is allowed. */
+	return POWER_SUPPLY_STATUS_CHARGING;
+}
+
 /**
  * _cm_monitor - Monitor the temperature and return true for exceptions.
  * @cm: the Charger Manager representing the battery.
@@ -673,60 +604,18 @@ static int cm_check_thermal_status(struct charger_manager *cm)
  */
 static bool _cm_monitor(struct charger_manager *cm)
 {
-	int temp_alrt;
+	int target;
 
-	temp_alrt = cm_check_thermal_status(cm);
+	target = cm_get_target_status(cm);
 
-	/* It has been stopped already */
-	if (temp_alrt && cm->emergency_stop)
-		return false;
+	try_charger_enable(cm, (target == POWER_SUPPLY_STATUS_CHARGING));
 
-	/*
-	 * Check temperature whether overheat or cold.
-	 * If temperature is out of range normal state, stop charging.
-	 */
-	if (temp_alrt) {
-		cm->emergency_stop = temp_alrt;
-		if (!try_charger_enable(cm, false))
-			uevent_notify(cm, default_event_names[temp_alrt]);
-
-	/*
-	 * Check whole charging duration and discharging duration
-	 * after full-batt.
-	 */
-	} else if (!cm->emergency_stop && check_charging_duration(cm)) {
-		dev_dbg(cm->dev,
-			"Charging/Discharging duration is out of range\n");
-	/*
-	 * Check dropped voltage of battery. If battery voltage is more
-	 * dropped than fullbatt_vchkdrop_uV after fully charged state,
-	 * charger-manager have to recharge battery.
-	 */
-	} else if (!cm->emergency_stop && is_ext_pwr_online(cm) &&
-			!cm->charger_enabled) {
-		fullbatt_vchk(&cm->fullbatt_vchk_work.work);
-
-	/*
-	 * Check whether fully charged state to protect overcharge
-	 * if charger-manager is charging for battery.
-	 */
-	} else if (!cm->emergency_stop && is_full_charged(cm) &&
-			cm->charger_enabled) {
-		dev_info(cm->dev, "EVENT_HANDLE: Battery Fully Charged\n");
-		uevent_notify(cm, default_event_names[CM_EVENT_BATT_FULL]);
-
-		try_charger_enable(cm, false);
-
-		fullbatt_vchk(&cm->fullbatt_vchk_work.work);
-	} else {
-		cm->emergency_stop = 0;
-		if (is_ext_pwr_online(cm)) {
-			if (!try_charger_enable(cm, true))
-				uevent_notify(cm, "CHARGING");
-		}
+	if (cm->battery_status != target) {
+		cm->battery_status = target;
+		power_supply_changed(cm->charger_psy);
 	}
 
-	return true;
+	return (cm->battery_status == POWER_SUPPLY_STATUS_NOT_CHARGING);
 }
 
 /**
@@ -819,66 +708,6 @@ static void cm_monitor_poller(struct work_struct *work)
 	schedule_work(&setup_polling);
 }
 
-/**
- * fullbatt_handler - Event handler for CM_EVENT_BATT_FULL
- * @cm: the Charger Manager representing the battery.
- */
-static void fullbatt_handler(struct charger_manager *cm)
-{
-	struct charger_desc *desc = cm->desc;
-
-	if (!desc->fullbatt_vchkdrop_uV || !desc->fullbatt_vchkdrop_ms)
-		goto out;
-
-	if (cm_suspended)
-		device_set_wakeup_capable(cm->dev, true);
-
-	mod_delayed_work(cm_wq, &cm->fullbatt_vchk_work,
-			 msecs_to_jiffies(desc->fullbatt_vchkdrop_ms));
-	cm->fullbatt_vchk_jiffies_at = jiffies + msecs_to_jiffies(
-				       desc->fullbatt_vchkdrop_ms);
-
-	if (cm->fullbatt_vchk_jiffies_at == 0)
-		cm->fullbatt_vchk_jiffies_at = 1;
-
-out:
-	dev_info(cm->dev, "EVENT_HANDLE: Battery Fully Charged\n");
-	uevent_notify(cm, default_event_names[CM_EVENT_BATT_FULL]);
-}
-
-/**
- * battout_handler - Event handler for CM_EVENT_BATT_OUT
- * @cm: the Charger Manager representing the battery.
- */
-static void battout_handler(struct charger_manager *cm)
-{
-	if (cm_suspended)
-		device_set_wakeup_capable(cm->dev, true);
-
-	if (!is_batt_present(cm)) {
-		dev_emerg(cm->dev, "Battery Pulled Out!\n");
-		uevent_notify(cm, default_event_names[CM_EVENT_BATT_OUT]);
-	} else {
-		uevent_notify(cm, "Battery Reinserted?");
-	}
-}
-
-/**
- * misc_event_handler - Handler for other events
- * @cm: the Charger Manager representing the battery.
- * @type: the Charger Manager representing the battery.
- */
-static void misc_event_handler(struct charger_manager *cm,
-			enum cm_event_types type)
-{
-	if (cm_suspended)
-		device_set_wakeup_capable(cm->dev, true);
-
-	if (is_polling_required(cm) && cm->desc->polling_interval_ms)
-		schedule_work(&setup_polling);
-	uevent_notify(cm, default_event_names[type]);
-}
-
 static int charger_get_property(struct power_supply *psy,
 		enum power_supply_property psp,
 		union power_supply_propval *val)
@@ -891,12 +720,7 @@ static int charger_get_property(struct power_supply *psy,
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
-		if (is_charging(cm))
-			val->intval = POWER_SUPPLY_STATUS_CHARGING;
-		else if (is_ext_pwr_online(cm))
-			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
-		else
-			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		val->intval = cm->battery_status;
 		break;
 	case POWER_SUPPLY_PROP_HEALTH:
 		if (cm->emergency_stop > 0)
@@ -925,7 +749,6 @@ static int charger_get_property(struct power_supply *psy,
 				POWER_SUPPLY_PROP_CURRENT_NOW, val);
 		break;
 	case POWER_SUPPLY_PROP_TEMP:
-	case POWER_SUPPLY_PROP_TEMP_AMBIENT:
 		return cm_get_battery_temperature(cm, &val->intval);
 	case POWER_SUPPLY_PROP_CAPACITY:
 		if (!is_batt_present(cm)) {
@@ -981,35 +804,13 @@ static int charger_get_property(struct power_supply *psy,
 			val->intval = 0;
 		break;
 	case POWER_SUPPLY_PROP_CHARGE_FULL:
-		if (is_full_charged(cm))
-			val->intval = 1;
-		else
-			val->intval = 0;
-		ret = 0;
-		break;
 	case POWER_SUPPLY_PROP_CHARGE_NOW:
-		if (is_charging(cm)) {
-			fuel_gauge = power_supply_get_by_name(
-					cm->desc->psy_fuel_gauge);
-			if (!fuel_gauge) {
-				ret = -ENODEV;
-				break;
-			}
-
-			ret = power_supply_get_property(fuel_gauge,
-						POWER_SUPPLY_PROP_CHARGE_NOW,
-						val);
-			if (ret) {
-				val->intval = 1;
-				ret = 0;
-			} else {
-				/* If CHARGE_NOW is supplied, use it */
-				val->intval = (val->intval > 0) ?
-						val->intval : 1;
-			}
-		} else {
-			val->intval = 0;
+		fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+		if (!fuel_gauge) {
+			ret = -ENODEV;
+			break;
 		}
+		ret = power_supply_get_property(fuel_gauge, psp, val);
 		break;
 	default:
 		return -EINVAL;
@@ -1028,13 +829,12 @@ static enum power_supply_property default_charger_props[] = {
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
 	POWER_SUPPLY_PROP_CAPACITY,
 	POWER_SUPPLY_PROP_ONLINE,
-	POWER_SUPPLY_PROP_CHARGE_FULL,
 	/*
 	 * Optional properties are:
+	 * POWER_SUPPLY_PROP_CHARGE_FULL,
 	 * POWER_SUPPLY_PROP_CHARGE_NOW,
 	 * POWER_SUPPLY_PROP_CURRENT_NOW,
-	 * POWER_SUPPLY_PROP_TEMP, and
-	 * POWER_SUPPLY_PROP_TEMP_AMBIENT,
+	 * POWER_SUPPLY_PROP_TEMP,
 	 */
 };
 
@@ -1069,21 +869,6 @@ static bool cm_setup_timer(void)
 
 	mutex_lock(&cm_list_mtx);
 	list_for_each_entry(cm, &cm_list, entry) {
-		unsigned int fbchk_ms = 0;
-
-		/* fullbatt_vchk is required. setup timer for that */
-		if (cm->fullbatt_vchk_jiffies_at) {
-			fbchk_ms = jiffies_to_msecs(cm->fullbatt_vchk_jiffies_at
-						    - jiffies);
-			if (time_is_before_eq_jiffies(
-				cm->fullbatt_vchk_jiffies_at) ||
-				msecs_to_jiffies(fbchk_ms) < CM_JIFFIES_SMALL) {
-				fullbatt_vchk(&cm->fullbatt_vchk_work.work);
-				fbchk_ms = 0;
-			}
-		}
-		CM_MIN_VALID(wakeup_ms, fbchk_ms);
-
 		/* Skip if polling is not required for this CM */
 		if (!is_polling_required(cm) && !cm->emergency_stop)
 			continue;
@@ -1145,7 +930,8 @@ static void charger_extcon_work(struct work_struct *work)
 			cable->min_uA, cable->max_uA);
 	}
 
-	try_charger_enable(cable->cm, cable->attached);
+	cancel_delayed_work(&cm_monitor_work);
+	queue_delayed_work(cm_wq, &cm_monitor_work, 0);
 }
 
 /**
@@ -1168,15 +954,6 @@ static int charger_extcon_notifier(struct notifier_block *self,
 	 */
 	cable->attached = event;
 
-	/*
-	 * Setup monitoring to check battery state
-	 * when charger cable is attached.
-	 */
-	if (cable->attached && is_polling_required(cable->cm)) {
-		cancel_work_sync(&setup_polling);
-		schedule_work(&setup_polling);
-	}
-
 	/*
 	 * Setup work for controlling charger(regulator)
 	 * according to charger cable.
@@ -1196,7 +973,8 @@ static int charger_extcon_notifier(struct notifier_block *self,
 static int charger_extcon_init(struct charger_manager *cm,
 		struct charger_cable *cable)
 {
-	int ret;
+	int ret, i;
+	u64 extcon_type = EXTCON_NONE;
 
 	/*
 	 * Charger manager use Extcon framework to identify
@@ -1205,14 +983,39 @@ static int charger_extcon_init(struct charger_manager *cm,
 	 */
 	INIT_WORK(&cable->wq, charger_extcon_work);
 	cable->nb.notifier_call = charger_extcon_notifier;
-	ret = extcon_register_interest(&cable->extcon_dev,
-			cable->extcon_name, cable->name, &cable->nb);
-	if (ret < 0) {
-		pr_info("Cannot register extcon_dev for %s(cable: %s)\n",
+
+	cable->extcon_dev = extcon_get_extcon_dev(cable->extcon_name);
+	if (IS_ERR_OR_NULL(cable->extcon_dev)) {
+		pr_err("Cannot find extcon_dev for %s (cable: %s)\n",
 			cable->extcon_name, cable->name);
+		if (cable->extcon_dev == NULL)
+			return -EPROBE_DEFER;
+		else
+			return PTR_ERR(cable->extcon_dev);
 	}
 
-	return ret;
+	for (i = 0; i < ARRAY_SIZE(extcon_mapping); i++) {
+		if (!strcmp(cable->name, extcon_mapping[i].name)) {
+			extcon_type = extcon_mapping[i].extcon_type;
+			break;
+		}
+	}
+	if (extcon_type == EXTCON_NONE) {
+		pr_err("Cannot find cable for type %s", cable->name);
+		return -EINVAL;
+	}
+
+	cable->extcon_type = extcon_type;
+
+	ret = devm_extcon_register_notifier(cm->dev, cable->extcon_dev,
+		cable->extcon_type, &cable->nb);
+	if (ret < 0) {
+		pr_err("Cannot register extcon_dev for %s (cable: %s)\n",
+			cable->extcon_name, cable->name);
+		return ret;
+	}
+
+	return 0;
 }
 
 /**
@@ -1229,6 +1032,7 @@ static int charger_manager_register_extcon(struct charger_manager *cm)
 {
 	struct charger_desc *desc = cm->desc;
 	struct charger_regulator *charger;
+	unsigned long event;
 	int ret;
 	int i;
 	int j;
@@ -1256,6 +1060,11 @@ static int charger_manager_register_extcon(struct charger_manager *cm)
 			}
 			cable->charger = charger;
 			cable->cm = cm;
+
+			event = extcon_get_state(cable->extcon_dev,
+				cable->extcon_type);
+			charger_extcon_notifier(&cable->nb,
+				event, NULL);
 		}
 	}
 
@@ -1447,7 +1256,7 @@ static int cm_init_thermal_data(struct charger_manager *cm,
 			return PTR_ERR(cm->tzd_batt);
 
 		/* Use external thermometer */
-		properties[*num_properties] = POWER_SUPPLY_PROP_TEMP_AMBIENT;
+		properties[*num_properties] = POWER_SUPPLY_PROP_TEMP;
 		(*num_properties)++;
 		cm->desc->measure_battery_temp = true;
 		ret = 0;
@@ -1491,8 +1300,6 @@ static struct charger_desc *of_cm_parse_desc(struct device *dev)
 	of_property_read_u32(np, "cm-poll-interval",
 				&desc->polling_interval_ms);
 
-	of_property_read_u32(np, "cm-fullbatt-vchkdrop-ms",
-					&desc->fullbatt_vchkdrop_ms);
 	of_property_read_u32(np, "cm-fullbatt-vchkdrop-volt",
 					&desc->fullbatt_vchkdrop_uV);
 	of_property_read_u32(np, "cm-fullbatt-voltage", &desc->fullbatt_uV);
@@ -1504,8 +1311,8 @@ static struct charger_desc *of_cm_parse_desc(struct device *dev)
 	desc->battery_present = battery_stat;
 
 	/* chargers */
-	of_property_read_u32(np, "cm-num-chargers", &num_chgs);
-	if (num_chgs) {
+	num_chgs = of_property_count_strings(np, "cm-chargers");
+	if (num_chgs > 0) {
 		int i;
 
 		/* Allocate empty bin at the tail of array */
@@ -1618,7 +1425,6 @@ static int charger_manager_probe(struct platform_device *pdev)
 	struct charger_desc *desc = cm_get_drv_data(pdev);
 	struct charger_manager *cm;
 	int ret, i = 0;
-	int j = 0;
 	union power_supply_propval val;
 	struct power_supply *fuel_gauge;
 	enum power_supply_property *properties;
@@ -1654,9 +1460,8 @@ static int charger_manager_probe(struct platform_device *pdev)
 	if (desc->fullbatt_uV == 0) {
 		dev_info(&pdev->dev, "Ignoring full-battery voltage threshold as it is not supplied\n");
 	}
-	if (!desc->fullbatt_vchkdrop_ms || !desc->fullbatt_vchkdrop_uV) {
+	if (!desc->fullbatt_vchkdrop_uV) {
 		dev_info(&pdev->dev, "Disabling full-battery voltage drop checking mechanism as it is not supplied\n");
-		desc->fullbatt_vchkdrop_ms = 0;
 		desc->fullbatt_vchkdrop_uV = 0;
 	}
 	if (desc->fullbatt_soc == 0) {
@@ -1738,6 +1543,12 @@ static int charger_manager_probe(struct platform_device *pdev)
 			desc->psy_fuel_gauge);
 		return -ENODEV;
 	}
+	if (!power_supply_get_property(fuel_gauge,
+					POWER_SUPPLY_PROP_CHARGE_FULL, &val)) {
+		properties[num_properties] =
+				POWER_SUPPLY_PROP_CHARGE_FULL;
+		num_properties++;
+	}
 	if (!power_supply_get_property(fuel_gauge,
 					  POWER_SUPPLY_PROP_CHARGE_NOW, &val)) {
 		properties[num_properties] =
@@ -1762,8 +1573,6 @@ static int charger_manager_probe(struct platform_device *pdev)
 	cm->charger_psy_desc.properties = properties;
 	cm->charger_psy_desc.num_properties = num_properties;
 
-	INIT_DELAYED_WORK(&cm->fullbatt_vchk_work, fullbatt_vchk);
-
 	/* Register sysfs entry for charger(regulator) */
 	ret = charger_manager_prepare_sysfs(cm);
 	if (ret < 0) {
@@ -1813,19 +1622,8 @@ static int charger_manager_probe(struct platform_device *pdev)
 	return 0;
 
 err_reg_extcon:
-	for (i = 0; i < desc->num_charger_regulators; i++) {
-		struct charger_regulator *charger;
-
-		charger = &desc->charger_regulators[i];
-		for (j = 0; j < charger->num_cables; j++) {
-			struct charger_cable *cable = &charger->cables[j];
-			/* Remove notifier block if only edev exists */
-			if (cable->extcon_dev.edev)
-				extcon_unregister_interest(&cable->extcon_dev);
-		}
-
+	for (i = 0; i < desc->num_charger_regulators; i++)
 		regulator_put(desc->charger_regulators[i].consumer);
-	}
 
 	power_supply_unregister(cm->charger_psy);
 
@@ -1837,7 +1635,6 @@ static int charger_manager_remove(struct platform_device *pdev)
 	struct charger_manager *cm = platform_get_drvdata(pdev);
 	struct charger_desc *desc = cm->desc;
 	int i = 0;
-	int j = 0;
 
 	/* Remove from the list */
 	mutex_lock(&cm_list_mtx);
@@ -1847,15 +1644,6 @@ static int charger_manager_remove(struct platform_device *pdev)
 	cancel_work_sync(&setup_polling);
 	cancel_delayed_work_sync(&cm_monitor_work);
 
-	for (i = 0 ; i < desc->num_charger_regulators ; i++) {
-		struct charger_regulator *charger
-				= &desc->charger_regulators[i];
-		for (j = 0 ; j < charger->num_cables ; j++) {
-			struct charger_cable *cable = &charger->cables[j];
-			extcon_unregister_interest(&cable->extcon_dev);
-		}
-	}
-
 	for (i = 0 ; i < desc->num_charger_regulators ; i++)
 		regulator_put(desc->charger_regulators[i].consumer);
 
@@ -1903,8 +1691,6 @@ static bool cm_need_to_awake(void)
 
 static int cm_suspend_prepare(struct device *dev)
 {
-	struct charger_manager *cm = dev_get_drvdata(dev);
-
 	if (cm_need_to_awake())
 		return -EBUSY;
 
@@ -1916,7 +1702,6 @@ static int cm_suspend_prepare(struct device *dev)
 	if (cm_timer_set) {
 		cancel_work_sync(&setup_polling);
 		cancel_delayed_work_sync(&cm_monitor_work);
-		cancel_delayed_work(&cm->fullbatt_vchk_work);
 	}
 
 	return 0;
@@ -1941,31 +1726,6 @@ static void cm_suspend_complete(struct device *dev)
 
 	_cm_monitor(cm);
 
-	/* Re-enqueue delayed work (fullbatt_vchk_work) */
-	if (cm->fullbatt_vchk_jiffies_at) {
-		unsigned long delay = 0;
-		unsigned long now = jiffies + CM_JIFFIES_SMALL;
-
-		if (time_after_eq(now, cm->fullbatt_vchk_jiffies_at)) {
-			delay = (unsigned long)((long)now
-				- (long)(cm->fullbatt_vchk_jiffies_at));
-			delay = jiffies_to_msecs(delay);
-		} else {
-			delay = 0;
-		}
-
-		/*
-		 * Account for cm_suspend_duration_ms with assuming that
-		 * timer stops in suspend.
-		 */
-		if (delay > cm_suspend_duration_ms)
-			delay -= cm_suspend_duration_ms;
-		else
-			delay = 0;
-
-		queue_delayed_work(cm_wq, &cm->fullbatt_vchk_work,
-				   msecs_to_jiffies(delay));
-	}
 	device_set_wakeup_capable(cm->dev, false);
 }
 
@@ -2007,56 +1767,6 @@ static void __exit charger_manager_cleanup(void)
 }
 module_exit(charger_manager_cleanup);
 
-/**
- * cm_notify_event - charger driver notify Charger Manager of charger event
- * @psy: pointer to instance of charger's power_supply
- * @type: type of charger event
- * @msg: optional message passed to uevent_notify function
- */
-void cm_notify_event(struct power_supply *psy, enum cm_event_types type,
-		     char *msg)
-{
-	struct charger_manager *cm;
-	bool found_power_supply = false;
-
-	if (psy == NULL)
-		return;
-
-	mutex_lock(&cm_list_mtx);
-	list_for_each_entry(cm, &cm_list, entry) {
-		if (match_string(cm->desc->psy_charger_stat, -1,
-				 psy->desc->name) >= 0) {
-			found_power_supply = true;
-			break;
-		}
-	}
-	mutex_unlock(&cm_list_mtx);
-
-	if (!found_power_supply)
-		return;
-
-	switch (type) {
-	case CM_EVENT_BATT_FULL:
-		fullbatt_handler(cm);
-		break;
-	case CM_EVENT_BATT_OUT:
-		battout_handler(cm);
-		break;
-	case CM_EVENT_BATT_IN:
-	case CM_EVENT_EXT_PWR_IN_OUT ... CM_EVENT_CHG_START_STOP:
-		misc_event_handler(cm, type);
-		break;
-	case CM_EVENT_UNKNOWN:
-	case CM_EVENT_OTHERS:
-		uevent_notify(cm, msg ? msg : default_event_names[type]);
-		break;
-	default:
-		dev_err(cm->dev, "%s: type not specified\n", __func__);
-		break;
-	}
-}
-EXPORT_SYMBOL_GPL(cm_notify_event);
-
 MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
 MODULE_DESCRIPTION("Charger Manager");
 MODULE_LICENSE("GPL");

drivers/power/supply/cpcap-battery.c

@@ -747,11 +747,8 @@ static int cpcap_battery_init_iio(struct cpcap_battery_ddata *ddata)
 	return 0;
 
 out_err:
-	if (error != -EPROBE_DEFER)
-		dev_err(ddata->dev, "could not initialize VBUS or ID IIO: %i\n",
-			error);
-
-	return error;
+	return dev_err_probe(ddata->dev, error,
+			     "could not initialize VBUS or ID IIO\n");
 }
 
 /* Calibrate coulomb counter */

drivers/power/supply/ds2780_battery.c

@@ -160,7 +160,7 @@ static int ds2780_get_voltage(struct ds2780_device_info *dev_info,
 
 	/*
 	 * The voltage value is located in 10 bits across the voltage MSB
-	 * and LSB registers in two's compliment form
+	 * and LSB registers in two's complement form
 	 * Sign bit of the voltage value is in bit 7 of the voltage MSB register
 	 * Bits 9 - 3 of the voltage value are in bits 6 - 0 of the
 	 * voltage MSB register
@@ -188,7 +188,7 @@ static int ds2780_get_temperature(struct ds2780_device_info *dev_info,
 
 	/*
 	 * The temperature value is located in 10 bits across the temperature
-	 * MSB and LSB registers in two's compliment form
+	 * MSB and LSB registers in two's complement form
 	 * Sign bit of the temperature value is in bit 7 of the temperature
 	 * MSB register
 	 * Bits 9 - 3 of the temperature value are in bits 6 - 0 of the
@@ -241,7 +241,7 @@ static int ds2780_get_current(struct ds2780_device_info *dev_info,
 
 	/*
 	 * The current value is located in 16 bits across the current MSB
-	 * and LSB registers in two's compliment form
+	 * and LSB registers in two's complement form
 	 * Sign bit of the current value is in bit 7 of the current MSB register
 	 * Bits 14 - 8 of the current value are in bits 6 - 0 of the current
 	 * MSB register

drivers/power/supply/ds2781_battery.c

@@ -168,7 +168,7 @@ static int ds2781_get_voltage(struct ds2781_device_info *dev_info,
 		return ret;
 	/*
 	 * The voltage value is located in 10 bits across the voltage MSB
-	 * and LSB registers in two's compliment form
+	 * and LSB registers in two's complement form
 	 * Sign bit of the voltage value is in bit 7 of the voltage MSB register
 	 * Bits 9 - 3 of the voltage value are in bits 6 - 0 of the
 	 * voltage MSB register
@@ -197,7 +197,7 @@ static int ds2781_get_temperature(struct ds2781_device_info *dev_info,
 		return ret;
 	/*
 	 * The temperature value is located in 10 bits across the temperature
-	 * MSB and LSB registers in two's compliment form
+	 * MSB and LSB registers in two's complement form
 	 * Sign bit of the temperature value is in bit 7 of the temperature
 	 * MSB register
 	 * Bits 9 - 3 of the temperature value are in bits 6 - 0 of the
@@ -242,7 +242,7 @@ static int ds2781_get_current(struct ds2781_device_info *dev_info,
 
 	/*
 	 * The current value is located in 16 bits across the current MSB
-	 * and LSB registers in two's compliment form
+	 * and LSB registers in two's complement form
 	 * Sign bit of the current value is in bit 7 of the current MSB register
 	 * Bits 14 - 8 of the current value are in bits 6 - 0 of the current
 	 * MSB register

drivers/power/supply/goldfish_battery.c

@@ -266,11 +266,13 @@ static const struct of_device_id goldfish_battery_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, goldfish_battery_of_match);
 
+#ifdef CONFIG_ACPI
 static const struct acpi_device_id goldfish_battery_acpi_match[] = {
 	{ "GFSH0001", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, goldfish_battery_acpi_match);
+#endif
 
 static struct platform_driver goldfish_battery_device = {
 	.probe		= goldfish_battery_probe,

drivers/power/supply/gpio-charger.c

@@ -5,7 +5,6 @@
  */
 
 #include <linux/device.h>
-#include <linux/gpio.h> /* For legacy platform data */
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -18,7 +17,13 @@
 
 #include <linux/power/gpio-charger.h>
 
+struct gpio_mapping {
+	u32 limit_ua;
+	u32 gpiodata;
+} __packed;
+
 struct gpio_charger {
+	struct device *dev;
 	unsigned int irq;
 	unsigned int charge_status_irq;
 	bool wakeup_enabled;
@@ -27,6 +32,11 @@ struct gpio_charger {
 	struct power_supply_desc charger_desc;
 	struct gpio_desc *gpiod;
 	struct gpio_desc *charge_status;
+
+	struct gpio_descs *current_limit_gpios;
+	struct gpio_mapping *current_limit_map;
+	u32 current_limit_map_size;
+	u32 charge_current_limit;
 };
 
 static irqreturn_t gpio_charger_irq(int irq, void *devid)
@@ -43,6 +53,35 @@ static inline struct gpio_charger *psy_to_gpio_charger(struct power_supply *psy)
 	return power_supply_get_drvdata(psy);
 }
 
+static int set_charge_current_limit(struct gpio_charger *gpio_charger, int val)
+{
+	struct gpio_mapping mapping;
+	int ndescs = gpio_charger->current_limit_gpios->ndescs;
+	struct gpio_desc **gpios = gpio_charger->current_limit_gpios->desc;
+	int i;
+
+	if (!gpio_charger->current_limit_map_size)
+		return -EINVAL;
+
+	for (i = 0; i < gpio_charger->current_limit_map_size; i++) {
+		if (gpio_charger->current_limit_map[i].limit_ua <= val)
+			break;
+	}
+	mapping = gpio_charger->current_limit_map[i];
+
+	for (i = 0; i < ndescs; i++) {
+		bool val = (mapping.gpiodata >> i) & 1;
+		gpiod_set_value_cansleep(gpios[ndescs-i-1], val);
+	}
+
+	gpio_charger->charge_current_limit = mapping.limit_ua;
+
+	dev_dbg(gpio_charger->dev, "set charge current limit to %d (requested: %d)\n",
+		gpio_charger->charge_current_limit, val);
+
+	return 0;
+}
+
 static int gpio_charger_get_property(struct power_supply *psy,
 		enum power_supply_property psp, union power_supply_propval *val)
 {
@@ -58,6 +97,9 @@ static int gpio_charger_get_property(struct power_supply *psy,
 		else
 			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		val->intval = gpio_charger->charge_current_limit;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -65,6 +107,34 @@ static int gpio_charger_get_property(struct power_supply *psy,
 	return 0;
 }
 
+static int gpio_charger_set_property(struct power_supply *psy,
+	enum power_supply_property psp, const union power_supply_propval *val)
+{
+	struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		return set_charge_current_limit(gpio_charger, val->intval);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int gpio_charger_property_is_writeable(struct power_supply *psy,
+					      enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		return 1;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
 static enum power_supply_type gpio_charger_get_type(struct device *dev)
 {
 	const char *chargetype;
@@ -112,6 +182,61 @@ static int gpio_charger_get_irq(struct device *dev, void *dev_id,
 	return irq;
 }
 
+static int init_charge_current_limit(struct device *dev,
+				    struct gpio_charger *gpio_charger)
+{
+	int i, len;
+	u32 cur_limit = U32_MAX;
+
+	gpio_charger->current_limit_gpios = devm_gpiod_get_array_optional(dev,
+		"charge-current-limit", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio_charger->current_limit_gpios)) {
+		dev_err(dev, "error getting current-limit GPIOs\n");
+		return PTR_ERR(gpio_charger->current_limit_gpios);
+	}
+
+	if (!gpio_charger->current_limit_gpios)
+		return 0;
+
+	len = device_property_read_u32_array(dev, "charge-current-limit-mapping",
+		NULL, 0);
+	if (len < 0)
+		return len;
+
+	if (len == 0 || len % 2) {
+		dev_err(dev, "invalid charge-current-limit-mapping length\n");
+		return -EINVAL;
+	}
+
+	gpio_charger->current_limit_map = devm_kmalloc_array(dev,
+		len / 2, sizeof(*gpio_charger->current_limit_map), GFP_KERNEL);
+	if (!gpio_charger->current_limit_map)
+		return -ENOMEM;
+
+	gpio_charger->current_limit_map_size = len / 2;
+
+	len = device_property_read_u32_array(dev, "charge-current-limit-mapping",
+		(u32*) gpio_charger->current_limit_map, len);
+	if (len < 0)
+		return len;
+
+	for (i=0; i < gpio_charger->current_limit_map_size; i++) {
+		if (gpio_charger->current_limit_map[i].limit_ua > cur_limit) {
+			dev_err(dev, "charge-current-limit-mapping not sorted by current in descending order\n");
+			return -EINVAL;
+		}
+
+		cur_limit = gpio_charger->current_limit_map[i].limit_ua;
+	}
+
+	/* default to smallest current limitation for safety reasons */
+	len = gpio_charger->current_limit_map_size - 1;
+	set_charge_current_limit(gpio_charger,
+		gpio_charger->current_limit_map[len].limit_ua);
+
+	return 0;
+}
+
 /*
  * The entries will be overwritten by driver's probe routine depending
  * on the available features. This list ensures, that the array is big
@@ -120,6 +245,7 @@ static int gpio_charger_get_irq(struct device *dev, void *dev_id,
 static enum power_supply_property gpio_charger_properties[] = {
 	POWER_SUPPLY_PROP_ONLINE,
 	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
 };
 
 static int gpio_charger_probe(struct platform_device *pdev)
@@ -131,7 +257,6 @@ static int gpio_charger_probe(struct platform_device *pdev)
 	struct power_supply_desc *charger_desc;
 	struct gpio_desc *charge_status;
 	int charge_status_irq;
-	unsigned long flags;
 	int ret;
 	int num_props = 0;
 
@@ -143,40 +268,17 @@ static int gpio_charger_probe(struct platform_device *pdev)
 	gpio_charger = devm_kzalloc(dev, sizeof(*gpio_charger), GFP_KERNEL);
 	if (!gpio_charger)
 		return -ENOMEM;
+	gpio_charger->dev = dev;
 
 	/*
 	 * This will fetch a GPIO descriptor from device tree, ACPI or
 	 * boardfile descriptor tables. It's good to try this first.
 	 */
 	gpio_charger->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN);
-
-	/*
-	 * Fallback to legacy platform data method, if no GPIO is specified
-	 * using boardfile descriptor tables.
-	 */
-	if (!gpio_charger->gpiod && pdata) {
-		/* Non-DT: use legacy GPIO numbers */
-		if (!gpio_is_valid(pdata->gpio)) {
-			dev_err(dev, "Invalid gpio pin in pdata\n");
-			return -EINVAL;
-		}
-		flags = GPIOF_IN;
-		if (pdata->gpio_active_low)
-			flags |= GPIOF_ACTIVE_LOW;
-		ret = devm_gpio_request_one(dev, pdata->gpio, flags,
-					    dev_name(dev));
-		if (ret) {
-			dev_err(dev, "Failed to request gpio pin: %d\n", ret);
-			return ret;
-		}
-		/* Then convert this to gpiod for now */
-		gpio_charger->gpiod = gpio_to_desc(pdata->gpio);
-	} else if (IS_ERR(gpio_charger->gpiod)) {
+	if (IS_ERR(gpio_charger->gpiod)) {
 		/* Just try again if this happens */
-		if (PTR_ERR(gpio_charger->gpiod) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-		dev_err(dev, "error getting GPIO descriptor\n");
-		return PTR_ERR(gpio_charger->gpiod);
+		return dev_err_probe(dev, PTR_ERR(gpio_charger->gpiod),
+				     "error getting GPIO descriptor\n");
 	}
 
 	if (gpio_charger->gpiod) {
@@ -193,10 +295,22 @@ static int gpio_charger_probe(struct platform_device *pdev)
 		num_props++;
 	}
 
+	ret = init_charge_current_limit(dev, gpio_charger);
+	if (ret < 0)
+		return ret;
+	if (gpio_charger->current_limit_map) {
+		gpio_charger_properties[num_props] =
+			POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX;
+		num_props++;
+	}
+
 	charger_desc = &gpio_charger->charger_desc;
 	charger_desc->properties = gpio_charger_properties;
 	charger_desc->num_properties = num_props;
 	charger_desc->get_property = gpio_charger_get_property;
+	charger_desc->set_property = gpio_charger_set_property;
+	charger_desc->property_is_writeable =
+					gpio_charger_property_is_writeable;
 
 	psy_cfg.of_node = dev->of_node;
 	psy_cfg.drv_data = gpio_charger;

drivers/power/supply/ingenic-battery.c

@@ -147,11 +147,9 @@ static int ingenic_battery_probe(struct platform_device *pdev)
 	psy_cfg.of_node = dev->of_node;
 
 	bat->battery = devm_power_supply_register(dev, desc, &psy_cfg);
-	if (IS_ERR(bat->battery)) {
-		if (PTR_ERR(bat->battery) != -EPROBE_DEFER)
-			dev_err(dev, "Unable to register battery\n");
-		return PTR_ERR(bat->battery);
-	}
+	if (IS_ERR(bat->battery))
+		return dev_err_probe(dev, PTR_ERR(bat->battery),
+				     "Unable to register battery\n");
 
 	ret = power_supply_get_battery_info(bat->battery, &bat->info);
 	if (ret) {

drivers/power/supply/lego_ev3_battery.c

@@ -166,27 +166,21 @@ static int lego_ev3_battery_probe(struct platform_device *pdev)
 
 	batt->iio_v = devm_iio_channel_get(dev, "voltage");
 	err = PTR_ERR_OR_ZERO(batt->iio_v);
-	if (err) {
-		if (err != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get voltage iio channel\n");
-		return err;
-	}
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Failed to get voltage iio channel\n");
 
 	batt->iio_i = devm_iio_channel_get(dev, "current");
 	err = PTR_ERR_OR_ZERO(batt->iio_i);
-	if (err) {
-		if (err != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get current iio channel\n");
-		return err;
-	}
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Failed to get current iio channel\n");
 
 	batt->rechargeable_gpio = devm_gpiod_get(dev, "rechargeable", GPIOD_IN);
 	err = PTR_ERR_OR_ZERO(batt->rechargeable_gpio);
-	if (err) {
-		if (err != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get rechargeable gpio\n");
-		return err;
-	}
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Failed to get rechargeable gpio\n");
 
 	/*
 	 * The rechargeable battery indication switch cannot be changed without

drivers/power/supply/ltc2941-battery-gauge.c

@@ -473,7 +473,8 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
 
 	np = of_node_get(client->dev.of_node);
 
-	info->id = (enum ltc294x_id)of_device_get_match_data(&client->dev);
+	info->id = (enum ltc294x_id) (uintptr_t) of_device_get_match_data(
+							&client->dev);
 	info->supply_desc.name = np->name;
 
 	/* r_sense can be negative, when sense+ is connected to the battery

drivers/power/supply/max17040_battery.c

@@ -15,196 +15,289 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/power_supply.h>
+#include <linux/of_device.h>
 #include <linux/max17040_battery.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 
 #define MAX17040_VCELL	0x02
 #define MAX17040_SOC	0x04
 #define MAX17040_MODE	0x06
 #define MAX17040_VER	0x08
-#define MAX17040_RCOMP	0x0C
+#define MAX17040_CONFIG	0x0C
+#define MAX17040_STATUS	0x1A
 #define MAX17040_CMD	0xFE
 
 
 #define MAX17040_DELAY		1000
 #define MAX17040_BATTERY_FULL	95
+#define MAX17040_RCOMP_DEFAULT  0x9700
 
-#define MAX17040_ATHD_MASK		0xFFC0
+#define MAX17040_ATHD_MASK		0x3f
+#define MAX17040_ALSC_MASK		0x40
 #define MAX17040_ATHD_DEFAULT_POWER_UP	4
+#define MAX17040_STATUS_HD_MASK		0x1000
+#define MAX17040_STATUS_SC_MASK		0x2000
+#define MAX17040_CFG_RCOMP_MASK		0xff00
+
+enum chip_id {
+	ID_MAX17040,
+	ID_MAX17041,
+	ID_MAX17043,
+	ID_MAX17044,
+	ID_MAX17048,
+	ID_MAX17049,
+	ID_MAX17058,
+	ID_MAX17059,
+};
+
+/* values that differ by chip_id */
+struct chip_data {
+	u16 reset_val;
+	u16 vcell_shift;
+	u16 vcell_mul;
+	u16 vcell_div;
+	u8  has_low_soc_alert;
+	u8  rcomp_bytes;
+	u8  has_soc_alert;
+};
+
+static struct chip_data max17040_family[] = {
+	[ID_MAX17040] = {
+		.reset_val = 0x0054,
+		.vcell_shift = 4,
+		.vcell_mul = 1250,
+		.vcell_div = 1,
+		.has_low_soc_alert = 0,
+		.rcomp_bytes = 2,
+		.has_soc_alert = 0,
+	},
+	[ID_MAX17041] = {
+		.reset_val = 0x0054,
+		.vcell_shift = 4,
+		.vcell_mul = 2500,
+		.vcell_div = 1,
+		.has_low_soc_alert = 0,
+		.rcomp_bytes = 2,
+		.has_soc_alert = 0,
+	},
+	[ID_MAX17043] = {
+		.reset_val = 0x0054,
+		.vcell_shift = 4,
+		.vcell_mul = 1250,
+		.vcell_div = 1,
+		.has_low_soc_alert = 1,
+		.rcomp_bytes = 1,
+		.has_soc_alert = 0,
+	},
+	[ID_MAX17044] = {
+		.reset_val = 0x0054,
+		.vcell_shift = 4,
+		.vcell_mul = 2500,
+		.vcell_div = 1,
+		.has_low_soc_alert = 1,
+		.rcomp_bytes = 1,
+		.has_soc_alert = 0,
+	},
+	[ID_MAX17048] = {
+		.reset_val = 0x5400,
+		.vcell_shift = 0,
+		.vcell_mul = 625,
+		.vcell_div = 8,
+		.has_low_soc_alert = 1,
+		.rcomp_bytes = 1,
+		.has_soc_alert = 1,
+	},
+	[ID_MAX17049] = {
+		.reset_val = 0x5400,
+		.vcell_shift = 0,
+		.vcell_mul = 625,
+		.vcell_div = 4,
+		.has_low_soc_alert = 1,
+		.rcomp_bytes = 1,
+		.has_soc_alert = 1,
+	},
+	[ID_MAX17058] = {
+		.reset_val = 0x5400,
+		.vcell_shift = 0,
+		.vcell_mul = 625,
+		.vcell_div = 8,
+		.has_low_soc_alert = 1,
+		.rcomp_bytes = 1,
+		.has_soc_alert = 0,
+	},
+	[ID_MAX17059] = {
+		.reset_val = 0x5400,
+		.vcell_shift = 0,
+		.vcell_mul = 625,
+		.vcell_div = 4,
+		.has_low_soc_alert = 1,
+		.rcomp_bytes = 1,
+		.has_soc_alert = 0,
+	},
+};
 
 struct max17040_chip {
 	struct i2c_client		*client;
+	struct regmap			*regmap;
 	struct delayed_work		work;
 	struct power_supply		*battery;
 	struct max17040_platform_data	*pdata;
+	struct chip_data		data;
 
-	/* State Of Connect */
-	int online;
-	/* battery voltage */
-	int vcell;
 	/* battery capacity */
 	int soc;
 	/* State Of Charge */
 	int status;
 	/* Low alert threshold from 32% to 1% of the State of Charge */
 	u32 low_soc_alert;
+	/* some devices return twice the capacity */
+	bool quirk_double_soc;
+	/* higher 8 bits for 17043+, 16 bits for 17040,41 */
+	u16 rcomp;
 };
 
-static int max17040_get_property(struct power_supply *psy,
-			    enum power_supply_property psp,
-			    union power_supply_propval *val)
+static int max17040_reset(struct max17040_chip *chip)
 {
-	struct max17040_chip *chip = power_supply_get_drvdata(psy);
-
-	switch (psp) {
-	case POWER_SUPPLY_PROP_STATUS:
-		val->intval = chip->status;
-		break;
-	case POWER_SUPPLY_PROP_ONLINE:
-		val->intval = chip->online;
-		break;
-	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-		val->intval = chip->vcell;
-		break;
-	case POWER_SUPPLY_PROP_CAPACITY:
-		val->intval = chip->soc;
-		break;
-	case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
-		val->intval = chip->low_soc_alert;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
+	return regmap_write(chip->regmap, MAX17040_CMD, chip->data.reset_val);
 }
 
-static int max17040_write_reg(struct i2c_client *client, int reg, u16 value)
+static int max17040_set_low_soc_alert(struct max17040_chip *chip, u32 level)
+{
+	level = 32 - level * (chip->quirk_double_soc ? 2 : 1);
+	return regmap_update_bits(chip->regmap, MAX17040_CONFIG,
+			MAX17040_ATHD_MASK, level);
+}
+
+static int max17040_set_soc_alert(struct max17040_chip *chip, bool enable)
+{
+	return regmap_update_bits(chip->regmap, MAX17040_CONFIG,
+			MAX17040_ALSC_MASK, enable ? MAX17040_ALSC_MASK : 0);
+}
+
+static int max17040_set_rcomp(struct max17040_chip *chip, u16 rcomp)
+{
+	u16 mask = chip->data.rcomp_bytes == 2 ?
+		0xffff : MAX17040_CFG_RCOMP_MASK;
+
+	return regmap_update_bits(chip->regmap, MAX17040_CONFIG, mask, rcomp);
+}
+
+static int max17040_raw_vcell_to_uvolts(struct max17040_chip *chip, u16 vcell)
+{
+	struct chip_data *d = &chip->data;
+
+	return (vcell >> d->vcell_shift) * d->vcell_mul / d->vcell_div;
+}
+
+
+static int max17040_get_vcell(struct max17040_chip *chip)
+{
+	u32 vcell;
+
+	regmap_read(chip->regmap, MAX17040_VCELL, &vcell);
+
+	return max17040_raw_vcell_to_uvolts(chip, vcell);
+}
+
+static int max17040_get_soc(struct max17040_chip *chip)
+{
+	u32 soc;
+
+	regmap_read(chip->regmap, MAX17040_SOC, &soc);
+
+	return soc >> (chip->quirk_double_soc ? 9 : 8);
+}
+
+static int max17040_get_version(struct max17040_chip *chip)
 {
 	int ret;
+	u32 version;
 
-	ret = i2c_smbus_write_word_swapped(client, reg, value);
+	ret = regmap_read(chip->regmap, MAX17040_VER, &version);
 
-	if (ret < 0)
-		dev_err(&client->dev, "%s: err %d\n", __func__, ret);
-
-	return ret;
+	return ret ? ret : version;
 }
 
-static int max17040_read_reg(struct i2c_client *client, int reg)
+static int max17040_get_online(struct max17040_chip *chip)
 {
-	int ret;
-
-	ret = i2c_smbus_read_word_swapped(client, reg);
-
-	if (ret < 0)
-		dev_err(&client->dev, "%s: err %d\n", __func__, ret);
-
-	return ret;
+	return chip->pdata && chip->pdata->battery_online ?
+		chip->pdata->battery_online() : 1;
 }
 
-static void max17040_reset(struct i2c_client *client)
+static int max17040_get_status(struct max17040_chip *chip)
 {
-	max17040_write_reg(client, MAX17040_CMD, 0x0054);
-}
-
-static int max17040_set_low_soc_alert(struct i2c_client *client, u32 level)
-{
-	int ret;
-	u16 data;
-
-	level = 32 - level;
-	data = max17040_read_reg(client, MAX17040_RCOMP);
-	/* clear the alrt bit and set LSb 5 bits */
-	data &= MAX17040_ATHD_MASK;
-	data |= level;
-	ret = max17040_write_reg(client, MAX17040_RCOMP, data);
-
-	return ret;
-}
-
-static void max17040_get_vcell(struct i2c_client *client)
-{
-	struct max17040_chip *chip = i2c_get_clientdata(client);
-	u16 vcell;
-
-	vcell = max17040_read_reg(client, MAX17040_VCELL);
-
-	chip->vcell = (vcell >> 4) * 1250;
-}
-
-static void max17040_get_soc(struct i2c_client *client)
-{
-	struct max17040_chip *chip = i2c_get_clientdata(client);
-	u16 soc;
-
-	soc = max17040_read_reg(client, MAX17040_SOC);
-
-	chip->soc = (soc >> 8);
-}
-
-static void max17040_get_version(struct i2c_client *client)
-{
-	u16 version;
-
-	version = max17040_read_reg(client, MAX17040_VER);
-
-	dev_info(&client->dev, "MAX17040 Fuel-Gauge Ver 0x%x\n", version);
-}
-
-static void max17040_get_online(struct i2c_client *client)
-{
-	struct max17040_chip *chip = i2c_get_clientdata(client);
-
-	if (chip->pdata && chip->pdata->battery_online)
-		chip->online = chip->pdata->battery_online();
-	else
-		chip->online = 1;
-}
-
-static void max17040_get_status(struct i2c_client *client)
-{
-	struct max17040_chip *chip = i2c_get_clientdata(client);
-
 	if (!chip->pdata || !chip->pdata->charger_online
-			|| !chip->pdata->charger_enable) {
-		chip->status = POWER_SUPPLY_STATUS_UNKNOWN;
-		return;
-	}
+			|| !chip->pdata->charger_enable)
+		return POWER_SUPPLY_STATUS_UNKNOWN;
 
-	if (chip->pdata->charger_online()) {
+	if (max17040_get_soc(chip) > MAX17040_BATTERY_FULL)
+		return POWER_SUPPLY_STATUS_FULL;
+
+	if (chip->pdata->charger_online())
 		if (chip->pdata->charger_enable())
-			chip->status = POWER_SUPPLY_STATUS_CHARGING;
+			return POWER_SUPPLY_STATUS_CHARGING;
 		else
-			chip->status = POWER_SUPPLY_STATUS_NOT_CHARGING;
-	} else {
-		chip->status = POWER_SUPPLY_STATUS_DISCHARGING;
-	}
-
-	if (chip->soc > MAX17040_BATTERY_FULL)
-		chip->status = POWER_SUPPLY_STATUS_FULL;
+			return POWER_SUPPLY_STATUS_NOT_CHARGING;
+	else
+		return POWER_SUPPLY_STATUS_DISCHARGING;
 }
 
 static int max17040_get_of_data(struct max17040_chip *chip)
 {
 	struct device *dev = &chip->client->dev;
+	struct chip_data *data = &max17040_family[
+		(uintptr_t) of_device_get_match_data(dev)];
+	int rcomp_len;
+	u8 rcomp[2];
+
+	chip->quirk_double_soc = device_property_read_bool(dev,
+							   "maxim,double-soc");
 
 	chip->low_soc_alert = MAX17040_ATHD_DEFAULT_POWER_UP;
 	device_property_read_u32(dev,
 				 "maxim,alert-low-soc-level",
 				 &chip->low_soc_alert);
 
-	if (chip->low_soc_alert <= 0 || chip->low_soc_alert >= 33)
+	if (chip->low_soc_alert <= 0 ||
+	    chip->low_soc_alert > (chip->quirk_double_soc ? 16 : 32)) {
+		dev_err(dev, "maxim,alert-low-soc-level out of bounds\n");
 		return -EINVAL;
+	}
+
+	rcomp_len = device_property_count_u8(dev, "maxim,rcomp");
+	chip->rcomp = MAX17040_RCOMP_DEFAULT;
+	if (rcomp_len == data->rcomp_bytes) {
+		device_property_read_u8_array(dev, "maxim,rcomp",
+					      rcomp, rcomp_len);
+		chip->rcomp = rcomp_len == 2 ?
+			rcomp[0] << 8 | rcomp[1] :
+			rcomp[0] << 8;
+	} else if (rcomp_len > 0) {
+		dev_err(dev, "maxim,rcomp has incorrect length\n");
+		return -EINVAL;
+	}
 
 	return 0;
 }
 
-static void max17040_check_changes(struct i2c_client *client)
+static void max17040_check_changes(struct max17040_chip *chip)
 {
-	max17040_get_vcell(client);
-	max17040_get_soc(client);
-	max17040_get_online(client);
-	max17040_get_status(client);
+	chip->soc = max17040_get_soc(chip);
+	chip->status = max17040_get_status(chip);
+}
+
+static void max17040_queue_work(struct max17040_chip *chip)
+{
+	queue_delayed_work(system_power_efficient_wq, &chip->work,
+			   MAX17040_DELAY);
+}
+
+static void max17040_stop_work(void *data)
+{
+	struct max17040_chip *chip = data;
+
+	cancel_delayed_work_sync(&chip->work);
 }
 
 static void max17040_work(struct work_struct *work)
@@ -217,30 +310,51 @@ static void max17040_work(struct work_struct *work)
 	/* store SOC and status to check changes */
 	last_soc = chip->soc;
 	last_status = chip->status;
-	max17040_check_changes(chip->client);
+	max17040_check_changes(chip);
 
 	/* check changes and send uevent */
 	if (last_soc != chip->soc || last_status != chip->status)
 		power_supply_changed(chip->battery);
 
-	queue_delayed_work(system_power_efficient_wq, &chip->work,
-			   MAX17040_DELAY);
+	max17040_queue_work(chip);
+}
+
+/* Returns true if alert cause was SOC change, not low SOC */
+static bool max17040_handle_soc_alert(struct max17040_chip *chip)
+{
+	bool ret = true;
+	u32 data;
+
+	regmap_read(chip->regmap, MAX17040_STATUS, &data);
+
+	if (data & MAX17040_STATUS_HD_MASK) {
+		// this alert was caused by low soc
+		ret = false;
+	}
+	if (data & MAX17040_STATUS_SC_MASK) {
+		// soc change bit -- deassert to mark as handled
+		regmap_write(chip->regmap, MAX17040_STATUS,
+				data & ~MAX17040_STATUS_SC_MASK);
+	}
+
+	return ret;
 }
 
 static irqreturn_t max17040_thread_handler(int id, void *dev)
 {
 	struct max17040_chip *chip = dev;
-	struct i2c_client *client = chip->client;
 
-	dev_warn(&client->dev, "IRQ: Alert battery low level");
+	if (!(chip->data.has_soc_alert && max17040_handle_soc_alert(chip)))
+		dev_warn(&chip->client->dev, "IRQ: Alert battery low level\n");
+
 	/* read registers */
-	max17040_check_changes(chip->client);
+	max17040_check_changes(chip);
 
 	/* send uevent */
 	power_supply_changed(chip->battery);
 
 	/* reset alert bit */
-	max17040_set_low_soc_alert(client, chip->low_soc_alert);
+	max17040_set_low_soc_alert(chip, chip->low_soc_alert);
 
 	return IRQ_HANDLED;
 }
@@ -279,12 +393,13 @@ static int max17040_set_property(struct power_supply *psy,
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
-		/* alert threshold can be programmed from 1% up to 32% */
-		if ((val->intval < 1) || (val->intval > 32)) {
+		/* alert threshold can be programmed from 1% up to 16/32% */
+		if ((val->intval < 1) ||
+		    (val->intval > (chip->quirk_double_soc ? 16 : 32))) {
 			ret = -EINVAL;
 			break;
 		}
-		ret = max17040_set_low_soc_alert(chip->client, val->intval);
+		ret = max17040_set_low_soc_alert(chip, val->intval);
 		chip->low_soc_alert = val->intval;
 		break;
 	default:
@@ -294,6 +409,41 @@ static int max17040_set_property(struct power_supply *psy,
 	return ret;
 }
 
+static int max17040_get_property(struct power_supply *psy,
+			    enum power_supply_property psp,
+			    union power_supply_propval *val)
+{
+	struct max17040_chip *chip = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = max17040_get_status(chip);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = max17040_get_online(chip);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = max17040_get_vcell(chip);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		val->intval = max17040_get_soc(chip);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+		val->intval = chip->low_soc_alert;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static const struct regmap_config max17040_regmap = {
+	.reg_bits	= 8,
+	.reg_stride	= 2,
+	.val_bits	= 16,
+	.val_format_endian = REGMAP_ENDIAN_BIG,
+};
+
 static enum power_supply_property max17040_battery_props[] = {
 	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_ONLINE,
@@ -318,6 +468,8 @@ static int max17040_probe(struct i2c_client *client,
 	struct i2c_adapter *adapter = client->adapter;
 	struct power_supply_config psy_cfg = {};
 	struct max17040_chip *chip;
+	enum chip_id chip_id;
+	bool enable_irq = false;
 	int ret;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
@@ -328,37 +480,68 @@ static int max17040_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	chip->client = client;
+	chip->regmap = devm_regmap_init_i2c(client, &max17040_regmap);
 	chip->pdata = client->dev.platform_data;
-	ret = max17040_get_of_data(chip);
-	if (ret) {
-		dev_err(&client->dev,
-			"failed: low SOC alert OF data out of bounds\n");
-		return ret;
+	chip_id = (enum chip_id) id->driver_data;
+	if (client->dev.of_node) {
+		ret = max17040_get_of_data(chip);
+		if (ret)
+			return ret;
+		chip_id = (enum chip_id) (uintptr_t)
+			of_device_get_match_data(&client->dev);
 	}
+	chip->data = max17040_family[chip_id];
 
 	i2c_set_clientdata(client, chip);
 	psy_cfg.drv_data = chip;
 
-	chip->battery = power_supply_register(&client->dev,
+	chip->battery = devm_power_supply_register(&client->dev,
 				&max17040_battery_desc, &psy_cfg);
 	if (IS_ERR(chip->battery)) {
 		dev_err(&client->dev, "failed: power supply register\n");
 		return PTR_ERR(chip->battery);
 	}
 
-	max17040_reset(client);
-	max17040_get_version(client);
+	ret = max17040_get_version(chip);
+	if (ret < 0)
+		return ret;
+	dev_dbg(&chip->client->dev, "MAX17040 Fuel-Gauge Ver 0x%x\n", ret);
+
+	if (chip_id == ID_MAX17040 || chip_id == ID_MAX17041)
+		max17040_reset(chip);
+
+	max17040_set_rcomp(chip, chip->rcomp);
 
 	/* check interrupt */
-	if (client->irq && of_device_is_compatible(client->dev.of_node,
-						   "maxim,max77836-battery")) {
-		ret = max17040_set_low_soc_alert(client, chip->low_soc_alert);
+	if (client->irq && chip->data.has_low_soc_alert) {
+		ret = max17040_set_low_soc_alert(chip, chip->low_soc_alert);
 		if (ret) {
 			dev_err(&client->dev,
 				"Failed to set low SOC alert: err %d\n", ret);
 			return ret;
 		}
 
+		enable_irq = true;
+	}
+
+	if (client->irq && chip->data.has_soc_alert) {
+		ret = max17040_set_soc_alert(chip, 1);
+		if (ret) {
+			dev_err(&client->dev,
+				"Failed to set SOC alert: err %d\n", ret);
+			return ret;
+		}
+		enable_irq = true;
+	} else {
+		/* soc alerts negate the need for polling */
+		INIT_DEFERRABLE_WORK(&chip->work, max17040_work);
+		ret = devm_add_action(&client->dev, max17040_stop_work, chip);
+		if (ret)
+			return ret;
+		max17040_queue_work(chip);
+	}
+
+	if (enable_irq) {
 		ret = max17040_enable_alert_irq(chip);
 		if (ret) {
 			client->irq = 0;
@@ -367,19 +550,6 @@ static int max17040_probe(struct i2c_client *client,
 		}
 	}
 
-	INIT_DEFERRABLE_WORK(&chip->work, max17040_work);
-	queue_delayed_work(system_power_efficient_wq, &chip->work,
-			   MAX17040_DELAY);
-
-	return 0;
-}
-
-static int max17040_remove(struct i2c_client *client)
-{
-	struct max17040_chip *chip = i2c_get_clientdata(client);
-
-	power_supply_unregister(chip->battery);
-	cancel_delayed_work(&chip->work);
 	return 0;
 }
 
@@ -390,7 +560,11 @@ static int max17040_suspend(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct max17040_chip *chip = i2c_get_clientdata(client);
 
-	cancel_delayed_work(&chip->work);
+	if (client->irq && chip->data.has_soc_alert)
+		// disable soc alert to prevent wakeup
+		max17040_set_soc_alert(chip, 0);
+	else
+		cancel_delayed_work(&chip->work);
 
 	if (client->irq && device_may_wakeup(dev))
 		enable_irq_wake(client->irq);
@@ -403,12 +577,14 @@ static int max17040_resume(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct max17040_chip *chip = i2c_get_clientdata(client);
 
-	queue_delayed_work(system_power_efficient_wq, &chip->work,
-			   MAX17040_DELAY);
-
 	if (client->irq && device_may_wakeup(dev))
 		disable_irq_wake(client->irq);
 
+	if (client->irq && chip->data.has_soc_alert)
+		max17040_set_soc_alert(chip, 1);
+	else
+		max17040_queue_work(chip);
+
 	return 0;
 }
 
@@ -422,16 +598,30 @@ static SIMPLE_DEV_PM_OPS(max17040_pm_ops, max17040_suspend, max17040_resume);
 #endif /* CONFIG_PM_SLEEP */
 
 static const struct i2c_device_id max17040_id[] = {
-	{ "max17040" },
-	{ "max77836-battery" },
-	{ }
+	{ "max17040", ID_MAX17040 },
+	{ "max17041", ID_MAX17041 },
+	{ "max17043", ID_MAX17043 },
+	{ "max77836-battery", ID_MAX17043 },
+	{ "max17044", ID_MAX17044 },
+	{ "max17048", ID_MAX17048 },
+	{ "max17049", ID_MAX17049 },
+	{ "max17058", ID_MAX17058 },
+	{ "max17059", ID_MAX17059 },
+	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(i2c, max17040_id);
 
 static const struct of_device_id max17040_of_match[] = {
-	{ .compatible = "maxim,max17040" },
-	{ .compatible = "maxim,max77836-battery" },
-	{ },
+	{ .compatible = "maxim,max17040", .data = (void *) ID_MAX17040 },
+	{ .compatible = "maxim,max17041", .data = (void *) ID_MAX17041 },
+	{ .compatible = "maxim,max17043", .data = (void *) ID_MAX17043 },
+	{ .compatible = "maxim,max77836-battery", .data = (void *) ID_MAX17043 },
+	{ .compatible = "maxim,max17044", .data = (void *) ID_MAX17044 },
+	{ .compatible = "maxim,max17048", .data = (void *) ID_MAX17048 },
+	{ .compatible = "maxim,max17049", .data = (void *) ID_MAX17049 },
+	{ .compatible = "maxim,max17058", .data = (void *) ID_MAX17058 },
+	{ .compatible = "maxim,max17059", .data = (void *) ID_MAX17059 },
+	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, max17040_of_match);
 
@@ -442,7 +632,6 @@ static struct i2c_driver max17040_i2c_driver = {
 		.pm	= MAX17040_PM_OPS,
 	},
 	.probe		= max17040_probe,
-	.remove		= max17040_remove,
 	.id_table	= max17040_id,
 };
 module_i2c_driver(max17040_i2c_driver);

drivers/power/supply/pm2301_charger.c

@@ -104,11 +104,6 @@ static int pm2xxx_charger_current_map[] = {
 	3000,
 };
 
-static const struct i2c_device_id pm2xxx_ident[] = {
-	{ "pm2301", 0 },
-	{ }
-};
-
 static void set_lpn_pin(struct pm2xxx_charger *pm2)
 {
 	if (!pm2->ac.charger_connected && gpio_is_valid(pm2->lpn_pin)) {
@@ -396,7 +391,7 @@ static int pm2_int_reg3(void *pm2_data, int val)
 
 	if (val & (PM2XXX_INT4_ITCHARGINGON)) {
 		dev_dbg(pm2->dev ,
-			"chargind operation has started\n");
+			"charging operation has started\n");
 	}
 
 	if (val & (PM2XXX_INT4_ITVRESUME)) {

drivers/power/supply/power_supply_core.c

@@ -579,6 +579,12 @@ int power_supply_get_battery_info(struct power_supply *psy,
 	info->charge_term_current_ua         = -EINVAL;
 	info->constant_charge_current_max_ua = -EINVAL;
 	info->constant_charge_voltage_max_uv = -EINVAL;
+	info->temp_ambient_alert_min         = INT_MIN;
+	info->temp_ambient_alert_max         = INT_MAX;
+	info->temp_alert_min                 = INT_MIN;
+	info->temp_alert_max                 = INT_MAX;
+	info->temp_min                       = INT_MIN;
+	info->temp_max                       = INT_MAX;
 	info->factory_internal_resistance_uohm  = -EINVAL;
 	info->resist_table = NULL;
 
@@ -639,6 +645,19 @@ int power_supply_get_battery_info(struct power_supply *psy,
 	of_property_read_u32(battery_np, "factory-internal-resistance-micro-ohms",
 			     &info->factory_internal_resistance_uohm);
 
+	of_property_read_u32_index(battery_np, "ambient-celsius",
+				   0, &info->temp_ambient_alert_min);
+	of_property_read_u32_index(battery_np, "ambient-celsius",
+				   1, &info->temp_ambient_alert_max);
+	of_property_read_u32_index(battery_np, "alert-celsius",
+				   0, &info->temp_alert_min);
+	of_property_read_u32_index(battery_np, "alert-celsius",
+				   1, &info->temp_alert_max);
+	of_property_read_u32_index(battery_np, "operating-range-celsius",
+				   0, &info->temp_min);
+	of_property_read_u32_index(battery_np, "operating-range-celsius",
+				   1, &info->temp_max);
+
 	len = of_property_count_u32_elems(battery_np, "ocv-capacity-celsius");
 	if (len < 0 && len != -EINVAL) {
 		err = len;

drivers/power/supply/power_supply_sysfs.c

@@ -56,6 +56,7 @@ static const char * const POWER_SUPPLY_TYPE_TEXT[] = {
 	[POWER_SUPPLY_TYPE_USB_PD]		= "USB_PD",
 	[POWER_SUPPLY_TYPE_USB_PD_DRP]		= "USB_PD_DRP",
 	[POWER_SUPPLY_TYPE_APPLE_BRICK_ID]	= "BrickID",
+	[POWER_SUPPLY_TYPE_WIRELESS]		= "Wireless",
 };
 
 static const char * const POWER_SUPPLY_USB_TYPE_TEXT[] = {

drivers/power/supply/rn5t618_power.c

@@ -0,0 +1,556 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Power supply driver for the RICOH RN5T618 power management chip family
+ *
+ * Copyright (C) 2020 Andreas Kemnade
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mfd/rn5t618.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define CHG_STATE_ADP_INPUT 0x40
+#define CHG_STATE_USB_INPUT 0x80
+#define CHG_STATE_MASK	0x1f
+#define CHG_STATE_CHG_OFF	0
+#define CHG_STATE_CHG_READY_VADP	1
+#define CHG_STATE_CHG_TRICKLE	2
+#define CHG_STATE_CHG_RAPID	3
+#define CHG_STATE_CHG_COMPLETE	4
+#define CHG_STATE_SUSPEND	5
+#define CHG_STATE_VCHG_OVER_VOL	6
+#define CHG_STATE_BAT_ERROR	7
+#define CHG_STATE_NO_BAT	8
+#define CHG_STATE_BAT_OVER_VOL	9
+#define CHG_STATE_BAT_TEMP_ERR	10
+#define CHG_STATE_DIE_ERR	11
+#define CHG_STATE_DIE_SHUTDOWN	12
+#define CHG_STATE_NO_BAT2	13
+#define CHG_STATE_CHG_READY_VUSB	14
+
+#define FG_ENABLE 1
+
+struct rn5t618_power_info {
+	struct rn5t618 *rn5t618;
+	struct platform_device *pdev;
+	struct power_supply *battery;
+	struct power_supply *usb;
+	struct power_supply *adp;
+	int irq;
+};
+
+static enum power_supply_property rn5t618_usb_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static enum power_supply_property rn5t618_adp_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+
+static enum power_supply_property rn5t618_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_NOW,
+};
+
+static int rn5t618_battery_read_doublereg(struct rn5t618_power_info *info,
+					  u8 reg, u16 *result)
+{
+	int ret, i;
+	u8 data[2];
+	u16 old, new;
+
+	old = 0;
+	/* Prevent races when registers are changing. */
+	for (i = 0; i < 3; i++) {
+		ret = regmap_bulk_read(info->rn5t618->regmap,
+				       reg, data, sizeof(data));
+		if (ret)
+			return ret;
+
+		new = data[0] << 8;
+		new |= data[1];
+		if (new == old)
+			break;
+
+		old = new;
+	}
+
+	*result = new;
+
+	return 0;
+}
+
+static int rn5t618_decode_status(unsigned int status)
+{
+	switch (status & CHG_STATE_MASK) {
+	case CHG_STATE_CHG_OFF:
+	case CHG_STATE_SUSPEND:
+	case CHG_STATE_VCHG_OVER_VOL:
+	case CHG_STATE_DIE_SHUTDOWN:
+		return POWER_SUPPLY_STATUS_DISCHARGING;
+
+	case CHG_STATE_CHG_TRICKLE:
+	case CHG_STATE_CHG_RAPID:
+		return POWER_SUPPLY_STATUS_CHARGING;
+
+	case CHG_STATE_CHG_COMPLETE:
+		return POWER_SUPPLY_STATUS_FULL;
+
+	default:
+		return POWER_SUPPLY_STATUS_NOT_CHARGING;
+	}
+}
+
+static int rn5t618_battery_status(struct rn5t618_power_info *info,
+				  union power_supply_propval *val)
+{
+	unsigned int v;
+	int ret;
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGSTATE, &v);
+	if (ret)
+		return ret;
+
+	val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+	if (v & 0xc0) { /* USB or ADP plugged */
+		val->intval = rn5t618_decode_status(v);
+	} else
+		val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+
+	return ret;
+}
+
+static int rn5t618_battery_present(struct rn5t618_power_info *info,
+				   union power_supply_propval *val)
+{
+	unsigned int v;
+	int ret;
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGSTATE, &v);
+	if (ret)
+		return ret;
+
+	v &= CHG_STATE_MASK;
+	if ((v == CHG_STATE_NO_BAT) || (v == CHG_STATE_NO_BAT2))
+		val->intval = 0;
+	else
+		val->intval = 1;
+
+	return ret;
+}
+
+static int rn5t618_battery_voltage_now(struct rn5t618_power_info *info,
+				       union power_supply_propval *val)
+{
+	u16 res;
+	int ret;
+
+	ret = rn5t618_battery_read_doublereg(info, RN5T618_VOLTAGE_1, &res);
+	if (ret)
+		return ret;
+
+	val->intval = res * 2 * 2500 / 4095 * 1000;
+
+	return 0;
+}
+
+static int rn5t618_battery_current_now(struct rn5t618_power_info *info,
+				       union power_supply_propval *val)
+{
+	u16 res;
+	int ret;
+
+	ret = rn5t618_battery_read_doublereg(info, RN5T618_CC_AVEREG1, &res);
+	if (ret)
+		return ret;
+
+	/* current is negative when discharging */
+	val->intval = sign_extend32(res, 13) * 1000;
+
+	return 0;
+}
+
+static int rn5t618_battery_capacity(struct rn5t618_power_info *info,
+				    union power_supply_propval *val)
+{
+	unsigned int v;
+	int ret;
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_SOC, &v);
+	if (ret)
+		return ret;
+
+	val->intval = v;
+
+	return 0;
+}
+
+static int rn5t618_battery_temp(struct rn5t618_power_info *info,
+				union power_supply_propval *val)
+{
+	u16 res;
+	int ret;
+
+	ret = rn5t618_battery_read_doublereg(info, RN5T618_TEMP_1, &res);
+	if (ret)
+		return ret;
+
+	val->intval = sign_extend32(res, 11) * 10 / 16;
+
+	return 0;
+}
+
+static int rn5t618_battery_tte(struct rn5t618_power_info *info,
+			       union power_supply_propval *val)
+{
+	u16 res;
+	int ret;
+
+	ret = rn5t618_battery_read_doublereg(info, RN5T618_TT_EMPTY_H, &res);
+	if (ret)
+		return ret;
+
+	if (res == 65535)
+		return -ENODATA;
+
+	val->intval = res * 60;
+
+	return 0;
+}
+
+static int rn5t618_battery_ttf(struct rn5t618_power_info *info,
+			       union power_supply_propval *val)
+{
+	u16 res;
+	int ret;
+
+	ret = rn5t618_battery_read_doublereg(info, RN5T618_TT_FULL_H, &res);
+	if (ret)
+		return ret;
+
+	if (res == 65535)
+		return -ENODATA;
+
+	val->intval = res * 60;
+
+	return 0;
+}
+
+static int rn5t618_battery_charge_full(struct rn5t618_power_info *info,
+				       union power_supply_propval *val)
+{
+	u16 res;
+	int ret;
+
+	ret = rn5t618_battery_read_doublereg(info, RN5T618_FA_CAP_H, &res);
+	if (ret)
+		return ret;
+
+	val->intval = res * 1000;
+
+	return 0;
+}
+
+static int rn5t618_battery_charge_now(struct rn5t618_power_info *info,
+				      union power_supply_propval *val)
+{
+	u16 res;
+	int ret;
+
+	ret = rn5t618_battery_read_doublereg(info, RN5T618_RE_CAP_H, &res);
+	if (ret)
+		return ret;
+
+	val->intval = res * 1000;
+
+	return 0;
+}
+
+static int rn5t618_battery_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	int ret = 0;
+	struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = rn5t618_battery_status(info, val);
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = rn5t618_battery_present(info, val);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = rn5t618_battery_voltage_now(info, val);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = rn5t618_battery_current_now(info, val);
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = rn5t618_battery_capacity(info, val);
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = rn5t618_battery_temp(info, val);
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+		ret = rn5t618_battery_tte(info, val);
+		break;
+	case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
+		ret = rn5t618_battery_ttf(info, val);
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		ret = rn5t618_battery_charge_full(info, val);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_NOW:
+		ret = rn5t618_battery_charge_now(info, val);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int rn5t618_adp_get_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    union power_supply_propval *val)
+{
+	struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
+	unsigned int chgstate;
+	bool online;
+	int ret;
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGSTATE, &chgstate);
+	if (ret)
+		return ret;
+
+	online = !!(chgstate & CHG_STATE_ADP_INPUT);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = online;
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		if (!online) {
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		}
+		val->intval = rn5t618_decode_status(chgstate);
+		if (val->intval != POWER_SUPPLY_STATUS_CHARGING)
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rn5t618_usb_get_property(struct power_supply *psy,
+				    enum power_supply_property psp,
+				    union power_supply_propval *val)
+{
+	struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
+	unsigned int chgstate;
+	bool online;
+	int ret;
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGSTATE, &chgstate);
+	if (ret)
+		return ret;
+
+	online = !!(chgstate & CHG_STATE_USB_INPUT);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = online;
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		if (!online) {
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		}
+		val->intval = rn5t618_decode_status(chgstate);
+		if (val->intval != POWER_SUPPLY_STATUS_CHARGING)
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct power_supply_desc rn5t618_battery_desc = {
+	.name                   = "rn5t618-battery",
+	.type                   = POWER_SUPPLY_TYPE_BATTERY,
+	.properties             = rn5t618_battery_props,
+	.num_properties         = ARRAY_SIZE(rn5t618_battery_props),
+	.get_property           = rn5t618_battery_get_property,
+};
+
+static const struct power_supply_desc rn5t618_adp_desc = {
+	.name                   = "rn5t618-adp",
+	.type                   = POWER_SUPPLY_TYPE_MAINS,
+	.properties             = rn5t618_adp_props,
+	.num_properties         = ARRAY_SIZE(rn5t618_adp_props),
+	.get_property           = rn5t618_adp_get_property,
+};
+
+static const struct power_supply_desc rn5t618_usb_desc = {
+	.name                   = "rn5t618-usb",
+	.type                   = POWER_SUPPLY_TYPE_USB,
+	.properties             = rn5t618_usb_props,
+	.num_properties         = ARRAY_SIZE(rn5t618_usb_props),
+	.get_property           = rn5t618_usb_get_property,
+};
+
+static irqreturn_t rn5t618_charger_irq(int irq, void *data)
+{
+	struct device *dev = data;
+	struct rn5t618_power_info *info = dev_get_drvdata(dev);
+
+	unsigned int ctrl, stat1, stat2, err;
+
+	regmap_read(info->rn5t618->regmap, RN5T618_CHGERR_IRR, &err);
+	regmap_read(info->rn5t618->regmap, RN5T618_CHGCTRL_IRR, &ctrl);
+	regmap_read(info->rn5t618->regmap, RN5T618_CHGSTAT_IRR1, &stat1);
+	regmap_read(info->rn5t618->regmap, RN5T618_CHGSTAT_IRR2, &stat2);
+
+	regmap_write(info->rn5t618->regmap, RN5T618_CHGERR_IRR, 0);
+	regmap_write(info->rn5t618->regmap, RN5T618_CHGCTRL_IRR, 0);
+	regmap_write(info->rn5t618->regmap, RN5T618_CHGSTAT_IRR1, 0);
+	regmap_write(info->rn5t618->regmap, RN5T618_CHGSTAT_IRR2, 0);
+
+	dev_dbg(dev, "chgerr: %x chgctrl: %x chgstat: %x chgstat2: %x\n",
+		err, ctrl, stat1, stat2);
+
+	power_supply_changed(info->usb);
+	power_supply_changed(info->adp);
+	power_supply_changed(info->battery);
+
+	return IRQ_HANDLED;
+}
+
+static int rn5t618_power_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	unsigned int v;
+	struct power_supply_config psy_cfg = {};
+	struct rn5t618_power_info *info;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->pdev = pdev;
+	info->rn5t618 = dev_get_drvdata(pdev->dev.parent);
+	info->irq = -1;
+
+	platform_set_drvdata(pdev, info);
+
+	ret = regmap_read(info->rn5t618->regmap, RN5T618_CONTROL, &v);
+	if (ret)
+		return ret;
+
+	if (!(v & FG_ENABLE)) {
+		/* E.g. the vendor kernels of various Kobo and Tolino Ebook
+		 * readers disable the fuel gauge on shutdown. If a kernel
+		 * without fuel gauge support is booted after that, the fuel
+		 * gauge will get decalibrated.
+		 */
+		dev_info(&pdev->dev, "Fuel gauge not enabled, enabling now\n");
+		dev_info(&pdev->dev, "Expect imprecise results\n");
+		regmap_update_bits(info->rn5t618->regmap, RN5T618_CONTROL,
+				   FG_ENABLE, FG_ENABLE);
+	}
+
+	psy_cfg.drv_data = info;
+	info->battery = devm_power_supply_register(&pdev->dev,
+						   &rn5t618_battery_desc,
+						   &psy_cfg);
+	if (IS_ERR(info->battery)) {
+		ret = PTR_ERR(info->battery);
+		dev_err(&pdev->dev, "failed to register battery: %d\n", ret);
+		return ret;
+	}
+
+	info->adp = devm_power_supply_register(&pdev->dev,
+					       &rn5t618_adp_desc,
+					       &psy_cfg);
+	if (IS_ERR(info->adp)) {
+		ret = PTR_ERR(info->adp);
+		dev_err(&pdev->dev, "failed to register adp: %d\n", ret);
+		return ret;
+	}
+
+	info->usb = devm_power_supply_register(&pdev->dev,
+					       &rn5t618_usb_desc,
+					       &psy_cfg);
+	if (IS_ERR(info->usb)) {
+		ret = PTR_ERR(info->usb);
+		dev_err(&pdev->dev, "failed to register usb: %d\n", ret);
+		return ret;
+	}
+
+	if (info->rn5t618->irq_data)
+		info->irq = regmap_irq_get_virq(info->rn5t618->irq_data,
+						RN5T618_IRQ_CHG);
+
+	if (info->irq < 0)
+		info->irq = -1;
+	else {
+		ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
+						rn5t618_charger_irq,
+						IRQF_ONESHOT,
+						"rn5t618_power",
+						&pdev->dev);
+
+		if (ret < 0) {
+			dev_err(&pdev->dev, "request IRQ:%d fail\n",
+				info->irq);
+			info->irq = -1;
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver rn5t618_power_driver = {
+	.driver = {
+		.name   = "rn5t618-power",
+	},
+	.probe = rn5t618_power_probe,
+};
+
+module_platform_driver(rn5t618_power_driver);
+MODULE_ALIAS("platform:rn5t618-power");
+MODULE_DESCRIPTION("Power supply driver for RICOH RN5T618");
+MODULE_LICENSE("GPL");

drivers/power/supply/rt9455_charger.c

@@ -1731,11 +1731,13 @@ static const struct of_device_id rt9455_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, rt9455_of_match);
 
+#ifdef CONFIG_ACPI
 static const struct acpi_device_id rt9455_i2c_acpi_match[] = {
 	{ "RT945500", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, rt9455_i2c_acpi_match);
+#endif
 
 static struct i2c_driver rt9455_driver = {
 	.probe		= rt9455_probe,

drivers/power/supply/sbs-battery.c

@@ -193,7 +193,6 @@ struct sbs_info {
 	struct power_supply		*power_supply;
 	bool				is_present;
 	struct gpio_desc		*gpio_detect;
-	bool				enable_detection;
 	bool				charger_broadcasts;
 	int				last_state;
 	int				poll_time;
@@ -480,37 +479,6 @@ static bool sbs_bat_needs_calibration(struct i2c_client *client)
 	return !!(ret & BIT(7));
 }
 
-static int sbs_get_battery_presence_and_health(
-	struct i2c_client *client, enum power_supply_property psp,
-	union power_supply_propval *val)
-{
-	int ret;
-
-	/* Dummy command; if it succeeds, battery is present. */
-	ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
-
-	if (ret < 0) { /* battery not present*/
-		if (psp == POWER_SUPPLY_PROP_PRESENT) {
-			val->intval = 0;
-			return 0;
-		}
-		return ret;
-	}
-
-	if (psp == POWER_SUPPLY_PROP_PRESENT)
-		val->intval = 1; /* battery present */
-	else { /* POWER_SUPPLY_PROP_HEALTH */
-		if (sbs_bat_needs_calibration(client)) {
-			val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
-		} else {
-			/* SBS spec doesn't have a general health command. */
-			val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
-		}
-	}
-
-	return 0;
-}
-
 static int sbs_get_ti_battery_presence_and_health(
 	struct i2c_client *client, enum power_supply_property psp,
 	union power_supply_propval *val)
@@ -569,6 +537,41 @@ static int sbs_get_ti_battery_presence_and_health(
 	return 0;
 }
 
+static int sbs_get_battery_presence_and_health(
+	struct i2c_client *client, enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct sbs_info *chip = i2c_get_clientdata(client);
+	int ret;
+
+	if (chip->flags & SBS_FLAGS_TI_BQ20ZX5)
+		return sbs_get_ti_battery_presence_and_health(client, psp, val);
+
+	/* Dummy command; if it succeeds, battery is present. */
+	ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
+
+	if (ret < 0) { /* battery not present*/
+		if (psp == POWER_SUPPLY_PROP_PRESENT) {
+			val->intval = 0;
+			return 0;
+		}
+		return ret;
+	}
+
+	if (psp == POWER_SUPPLY_PROP_PRESENT)
+		val->intval = 1; /* battery present */
+	else { /* POWER_SUPPLY_PROP_HEALTH */
+		if (sbs_bat_needs_calibration(client)) {
+			val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
+		} else {
+			/* SBS spec doesn't have a general health command. */
+			val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+		}
+	}
+
+	return 0;
+}
+
 static int sbs_get_battery_property(struct i2c_client *client,
 	int reg_offset, enum power_supply_property psp,
 	union power_supply_propval *val)
@@ -871,12 +874,7 @@ static int sbs_get_property(struct power_supply *psy,
 	switch (psp) {
 	case POWER_SUPPLY_PROP_PRESENT:
 	case POWER_SUPPLY_PROP_HEALTH:
-		if (chip->flags & SBS_FLAGS_TI_BQ20ZX5)
-			ret = sbs_get_ti_battery_presence_and_health(client,
-								     psp, val);
-		else
-			ret = sbs_get_battery_presence_and_health(client, psp,
-								  val);
+		ret = sbs_get_battery_presence_and_health(client, psp, val);
 
 		/* this can only be true if no gpio is used */
 		if (psp == POWER_SUPPLY_PROP_PRESENT)
@@ -967,32 +965,30 @@ static int sbs_get_property(struct power_supply *psy,
 		return -EINVAL;
 	}
 
-	if (!chip->enable_detection)
-		goto done;
+	if (!chip->gpio_detect && chip->is_present != (ret >= 0)) {
+		bool old_present = chip->is_present;
+		union power_supply_propval val;
+		int err = sbs_get_battery_presence_and_health(
+				client, POWER_SUPPLY_PROP_PRESENT, &val);
 
-	if (!chip->gpio_detect &&
-		chip->is_present != (ret >= 0)) {
-		sbs_update_presence(chip, (ret >= 0));
-		power_supply_changed(chip->power_supply);
+		sbs_update_presence(chip, !err && val.intval);
+
+		if (old_present != chip->is_present)
+			power_supply_changed(chip->power_supply);
 	}
 
 done:
 	if (!ret) {
 		/* Convert units to match requirements for power supply class */
 		sbs_unit_adjustment(client, psp, val);
+		dev_dbg(&client->dev,
+			"%s: property = %d, value = %x\n", __func__,
+			psp, val->intval);
+	} else if (!chip->is_present)  {
+		/* battery not present, so return NODATA for properties */
+		ret = -ENODATA;
 	}
-
-	dev_dbg(&client->dev,
-		"%s: property = %d, value = %x\n", __func__, psp, val->intval);
-
-	if (ret && chip->is_present)
-		return ret;
-
-	/* battery not present, so return NODATA for properties */
-	if (ret)
-		return -ENODATA;
-
-	return 0;
+	return ret;
 }
 
 static void sbs_supply_changed(struct sbs_info *chip)
@@ -1098,7 +1094,6 @@ static int sbs_probe(struct i2c_client *client)
 
 	chip->flags = (u32)(uintptr_t)device_get_match_data(&client->dev);
 	chip->client = client;
-	chip->enable_detection = false;
 	psy_cfg.of_node = client->dev.of_node;
 	psy_cfg.drv_data = chip;
 	chip->last_state = POWER_SUPPLY_STATUS_UNKNOWN;
@@ -1159,15 +1154,19 @@ skip_gpio:
 	 * to the battery.
 	 */
 	if (!(force_load || chip->gpio_detect)) {
-		rc = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
+		union power_supply_propval val;
 
-		if (rc < 0) {
-			dev_err(&client->dev, "%s: Failed to get device status\n",
-				__func__);
+		rc = sbs_get_battery_presence_and_health(
+				client, POWER_SUPPLY_PROP_PRESENT, &val);
+		if (rc < 0 || !val.intval) {
+			dev_err(&client->dev, "Failed to get present status\n");
+			rc = -ENODEV;
 			goto exit_psupply;
 		}
 	}
 
+	INIT_DELAYED_WORK(&chip->work, sbs_delayed_work);
+
 	chip->power_supply = devm_power_supply_register(&client->dev, sbs_desc,
 						   &psy_cfg);
 	if (IS_ERR(chip->power_supply)) {
@@ -1180,10 +1179,6 @@ skip_gpio:
 	dev_info(&client->dev,
 		"%s: battery gas gauge device registered\n", client->name);
 
-	INIT_DELAYED_WORK(&chip->work, sbs_delayed_work);
-
-	chip->enable_detection = true;
-
 	return 0;
 
 exit_psupply:

drivers/power/supply/test_power.c

@@ -352,8 +352,8 @@ static int param_set_ac_online(const char *key, const struct kernel_param *kp)
 
 static int param_get_ac_online(char *buffer, const struct kernel_param *kp)
 {
-	strcpy(buffer, map_get_key(map_ac_online, ac_online, "unknown"));
-	return strlen(buffer);
+	return sprintf(buffer, "%s\n",
+			map_get_key(map_ac_online, ac_online, "unknown"));
 }
 
 static int param_set_usb_online(const char *key, const struct kernel_param *kp)
@@ -365,8 +365,8 @@ static int param_set_usb_online(const char *key, const struct kernel_param *kp)
 
 static int param_get_usb_online(char *buffer, const struct kernel_param *kp)
 {
-	strcpy(buffer, map_get_key(map_ac_online, usb_online, "unknown"));
-	return strlen(buffer);
+	return sprintf(buffer, "%s\n",
+			map_get_key(map_ac_online, usb_online, "unknown"));
 }
 
 static int param_set_battery_status(const char *key,
@@ -379,8 +379,8 @@ static int param_set_battery_status(const char *key,
 
 static int param_get_battery_status(char *buffer, const struct kernel_param *kp)
 {
-	strcpy(buffer, map_get_key(map_status, battery_status, "unknown"));
-	return strlen(buffer);
+	return sprintf(buffer, "%s\n",
+			map_get_key(map_ac_online, battery_status, "unknown"));
 }
 
 static int param_set_battery_health(const char *key,
@@ -393,8 +393,8 @@ static int param_set_battery_health(const char *key,
 
 static int param_get_battery_health(char *buffer, const struct kernel_param *kp)
 {
-	strcpy(buffer, map_get_key(map_health, battery_health, "unknown"));
-	return strlen(buffer);
+	return sprintf(buffer, "%s\n",
+			map_get_key(map_ac_online, battery_health, "unknown"));
 }
 
 static int param_set_battery_present(const char *key,
@@ -408,8 +408,8 @@ static int param_set_battery_present(const char *key,
 static int param_get_battery_present(char *buffer,
 					const struct kernel_param *kp)
 {
-	strcpy(buffer, map_get_key(map_present, battery_present, "unknown"));
-	return strlen(buffer);
+	return sprintf(buffer, "%s\n",
+			map_get_key(map_ac_online, battery_present, "unknown"));
 }
 
 static int param_set_battery_technology(const char *key,
@@ -424,9 +424,9 @@ static int param_set_battery_technology(const char *key,
 static int param_get_battery_technology(char *buffer,
 					const struct kernel_param *kp)
 {
-	strcpy(buffer,
-		map_get_key(map_technology, battery_technology, "unknown"));
-	return strlen(buffer);
+	return sprintf(buffer, "%s\n",
+			map_get_key(map_ac_online, battery_technology,
+					"unknown"));
 }
 
 static int param_set_battery_capacity(const char *key,

drivers/power/supply/ucs1002_power.c

@@ -38,6 +38,7 @@
 
 /* Interrupt Status */
 #define UCS1002_REG_INTERRUPT_STATUS	0x10
+#  define F_ERR				BIT(7)
 #  define F_DISCHARGE_ERR		BIT(6)
 #  define F_RESET			BIT(5)
 #  define F_MIN_KEEP_OUT		BIT(4)
@@ -103,6 +104,9 @@ struct ucs1002_info {
 	struct regulator_dev *rdev;
 	bool present;
 	bool output_disable;
+	struct delayed_work health_poll;
+	int health;
+
 };
 
 static enum power_supply_property ucs1002_props[] = {
@@ -362,32 +366,6 @@ static int ucs1002_get_usb_type(struct ucs1002_info *info,
 	return 0;
 }
 
-static int ucs1002_get_health(struct ucs1002_info *info,
-			      union power_supply_propval *val)
-{
-	unsigned int reg;
-	int ret, health;
-
-	ret = regmap_read(info->regmap, UCS1002_REG_INTERRUPT_STATUS, &reg);
-	if (ret)
-		return ret;
-
-	if (reg & F_TSD)
-		health = POWER_SUPPLY_HEALTH_OVERHEAT;
-	else if (reg & (F_OVER_VOLT | F_BACK_VOLT))
-		health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
-	else if (reg & F_OVER_ILIM)
-		health = POWER_SUPPLY_HEALTH_OVERCURRENT;
-	else if (reg & (F_DISCHARGE_ERR | F_MIN_KEEP_OUT))
-		health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
-	else
-		health = POWER_SUPPLY_HEALTH_GOOD;
-
-	val->intval = health;
-
-	return 0;
-}
-
 static int ucs1002_get_property(struct power_supply *psy,
 				enum power_supply_property psp,
 				union power_supply_propval *val)
@@ -406,7 +384,7 @@ static int ucs1002_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_USB_TYPE:
 		return ucs1002_get_usb_type(info, val);
 	case POWER_SUPPLY_PROP_HEALTH:
-		return ucs1002_get_health(info, val);
+		return val->intval = info->health;
 	case POWER_SUPPLY_PROP_PRESENT:
 		val->intval = info->present;
 		return 0;
@@ -458,6 +436,38 @@ static const struct power_supply_desc ucs1002_charger_desc = {
 	.num_properties		= ARRAY_SIZE(ucs1002_props),
 };
 
+static void ucs1002_health_poll(struct work_struct *work)
+{
+	struct ucs1002_info *info = container_of(work, struct ucs1002_info,
+						 health_poll.work);
+	int ret;
+	u32 reg;
+
+	ret = regmap_read(info->regmap, UCS1002_REG_INTERRUPT_STATUS, &reg);
+	if (ret)
+		return;
+
+	/* bad health and no status change, just schedule us again in a while */
+	if ((reg & F_ERR) && info->health != POWER_SUPPLY_HEALTH_GOOD) {
+		schedule_delayed_work(&info->health_poll,
+				      msecs_to_jiffies(2000));
+		return;
+	}
+
+	if (reg & F_TSD)
+		info->health = POWER_SUPPLY_HEALTH_OVERHEAT;
+	else if (reg & (F_OVER_VOLT | F_BACK_VOLT))
+		info->health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	else if (reg & F_OVER_ILIM)
+		info->health = POWER_SUPPLY_HEALTH_OVERCURRENT;
+	else if (reg & (F_DISCHARGE_ERR | F_MIN_KEEP_OUT))
+		info->health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+	else
+		info->health = POWER_SUPPLY_HEALTH_GOOD;
+
+	sysfs_notify(&info->charger->dev.kobj, NULL, "health");
+}
+
 static irqreturn_t ucs1002_charger_irq(int irq, void *data)
 {
 	int ret, regval;
@@ -484,7 +494,7 @@ static irqreturn_t ucs1002_alert_irq(int irq, void *data)
 {
 	struct ucs1002_info *info = data;
 
-	power_supply_changed(info->charger);
+	mod_delayed_work(system_wq, &info->health_poll, 0);
 
 	return IRQ_HANDLED;
 }
@@ -632,6 +642,9 @@ static int ucs1002_probe(struct i2c_client *client,
 		return ret;
 	}
 
+	info->health = POWER_SUPPLY_HEALTH_GOOD;
+	INIT_DELAYED_WORK(&info->health_poll, ucs1002_health_poll);
+
 	if (irq_a_det > 0) {
 		ret = devm_request_threaded_irq(dev, irq_a_det, NULL,
 						ucs1002_charger_irq,
@@ -645,10 +658,8 @@ static int ucs1002_probe(struct i2c_client *client,
 	}
 
 	if (irq_alert > 0) {
-		ret = devm_request_threaded_irq(dev, irq_alert, NULL,
-						ucs1002_alert_irq,
-						IRQF_ONESHOT,
-						"ucs1002-alert", info);
+		ret = devm_request_irq(dev, irq_alert, ucs1002_alert_irq,
+				       0,"ucs1002-alert", info);
 		if (ret) {
 			dev_err(dev, "Failed to request ALERT threaded irq: %d\n",
 				ret);

include/dt-bindings/power/summit,smb347-charger.h

@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later or MIT) */
+/*
+ * Author: David Heidelberg <david@ixit.cz>
+ */
+
+#ifndef _DT_BINDINGS_SMB347_CHARGER_H
+#define _DT_BINDINGS_SMB347_CHARGER_H
+
+/* Charging compensation method */
+#define SMB3XX_SOFT_TEMP_COMPENSATE_NONE	0
+#define SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT	1
+#define SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE	2
+
+/* Charging enable control */
+#define SMB3XX_CHG_ENABLE_SW			0
+#define SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW	1
+#define SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH	2
+
+#endif

include/linux/power/bq27xxx_battery.h

@@ -32,6 +32,7 @@ enum bq27xxx_chip {
 	BQ27621,
 	BQ27Z561,
 	BQ28Z610,
+	BQ34Z100,
 };
 
 struct bq27xxx_device_info;

include/linux/power/charger-manager.h

@@ -31,22 +31,16 @@ enum polling_modes {
 	CM_POLL_CHARGING_ONLY,
 };
 
-enum cm_event_types {
-	CM_EVENT_UNKNOWN = 0,
-	CM_EVENT_BATT_FULL,
-	CM_EVENT_BATT_IN,
-	CM_EVENT_BATT_OUT,
-	CM_EVENT_BATT_OVERHEAT,
-	CM_EVENT_BATT_COLD,
-	CM_EVENT_EXT_PWR_IN_OUT,
-	CM_EVENT_CHG_START_STOP,
-	CM_EVENT_OTHERS,
+enum cm_batt_temp {
+	CM_BATT_OK = 0,
+	CM_BATT_OVERHEAT,
+	CM_BATT_COLD,
 };
 
 /**
  * struct charger_cable
  * @extcon_name: the name of extcon device.
- * @name: the name of charger cable(external connector).
+ * @name: the name of the cable connector
  * @extcon_dev: the extcon device.
  * @wq: the workqueue to control charger according to the state of
  *	charger cable. If charger cable is attached, enable charger.
@@ -62,9 +56,10 @@ enum cm_event_types {
 struct charger_cable {
 	const char *extcon_name;
 	const char *name;
+	struct extcon_dev *extcon_dev;
+	u64 extcon_type;
 
 	/* The charger-manager use Extcon framework */
-	struct extcon_specific_cable_nb extcon_dev;
 	struct work_struct wq;
 	struct notifier_block nb;
 
@@ -131,11 +126,10 @@ struct charger_regulator {
  * @psy_name: the name of power-supply-class for charger manager
  * @polling_mode:
  *	Determine which polling mode will be used
- * @fullbatt_vchkdrop_ms:
  * @fullbatt_vchkdrop_uV:
  *	Check voltage drop after the battery is fully charged.
- *	If it has dropped more than fullbatt_vchkdrop_uV after
- *	fullbatt_vchkdrop_ms, CM will restart charging.
+ *	If it has dropped more than fullbatt_vchkdrop_uV
+ *	CM will restart charging.
  * @fullbatt_uV: voltage in microvolt
  *	If VBATT >= fullbatt_uV, it is assumed to be full.
  * @fullbatt_soc: state of Charge in %
@@ -172,7 +166,6 @@ struct charger_desc {
 	enum polling_modes polling_mode;
 	unsigned int polling_interval_ms;
 
-	unsigned int fullbatt_vchkdrop_ms;
 	unsigned int fullbatt_vchkdrop_uV;
 	unsigned int fullbatt_uV;
 	unsigned int fullbatt_soc;
@@ -211,9 +204,6 @@ struct charger_desc {
  * @charger_stat: array of power_supply for chargers
  * @tzd_batt : thermal zone device for battery
  * @charger_enabled: the state of charger
- * @fullbatt_vchk_jiffies_at:
- *	jiffies at the time full battery check will occur.
- * @fullbatt_vchk_work: work queue for full battery check
  * @emergency_stop:
  *	When setting true, stop charging
  * @psy_name_buf: the name of power-supply-class for charger manager
@@ -224,6 +214,7 @@ struct charger_desc {
  *	saved status of battery before entering suspend-to-RAM
  * @charging_start_time: saved start time of enabling charging
  * @charging_end_time: saved end time of disabling charging
+ * @battery_status: Current battery status
  */
 struct charger_manager {
 	struct list_head entry;
@@ -235,9 +226,6 @@ struct charger_manager {
 #endif
 	bool charger_enabled;
 
-	unsigned long fullbatt_vchk_jiffies_at;
-	struct delayed_work fullbatt_vchk_work;
-
 	int emergency_stop;
 
 	char psy_name_buf[PSY_NAME_MAX + 1];
@@ -246,13 +234,8 @@ struct charger_manager {
 
 	u64 charging_start_time;
 	u64 charging_end_time;
+
+	int battery_status;
 };
 
-#if IS_ENABLED(CONFIG_CHARGER_MANAGER)
-extern void cm_notify_event(struct power_supply *psy,
-				enum cm_event_types type, char *msg);
-#else
-static inline void cm_notify_event(struct power_supply *psy,
-				enum cm_event_types type, char *msg) { }
-#endif
 #endif /* _CHARGER_MANAGER_H */

include/linux/power/gpio-charger.h

@@ -13,18 +13,12 @@
  * struct gpio_charger_platform_data - platform_data for gpio_charger devices
  * @name:		Name for the chargers power_supply device
  * @type:		Type of the charger
- * @gpio:		GPIO which is used to indicate the chargers status
- * @gpio_active_low:	Should be set to 1 if the GPIO is active low otherwise 0
  * @supplied_to:	Array of battery names to which this chargers supplies power
  * @num_supplicants:	Number of entries in the supplied_to array
  */
 struct gpio_charger_platform_data {
 	const char *name;
 	enum power_supply_type type;
-
-	int gpio;
-	int gpio_active_low;
-
 	char **supplied_to;
 	size_t num_supplicants;
 };

include/linux/power/smb347-charger.h

@@ -1,114 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Summit Microelectronics SMB347 Battery Charger Driver
- *
- * Copyright (C) 2011, Intel Corporation
- *
- * Authors: Bruce E. Robertson <bruce.e.robertson@intel.com>
- *          Mika Westerberg <mika.westerberg@linux.intel.com>
- */
-
-#ifndef SMB347_CHARGER_H
-#define SMB347_CHARGER_H
-
-#include <linux/types.h>
-#include <linux/power_supply.h>
-
-enum {
-	/* use the default compensation method */
-	SMB347_SOFT_TEMP_COMPENSATE_DEFAULT = -1,
-
-	SMB347_SOFT_TEMP_COMPENSATE_NONE,
-	SMB347_SOFT_TEMP_COMPENSATE_CURRENT,
-	SMB347_SOFT_TEMP_COMPENSATE_VOLTAGE,
-};
-
-/* Use default factory programmed value for hard/soft temperature limit */
-#define SMB347_TEMP_USE_DEFAULT		-273
-
-/*
- * Charging enable can be controlled by software (via i2c) by
- * smb347-charger driver or by EN pin (active low/high).
- */
-enum smb347_chg_enable {
-	SMB347_CHG_ENABLE_SW,
-	SMB347_CHG_ENABLE_PIN_ACTIVE_LOW,
-	SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH,
-};
-
-/**
- * struct smb347_charger_platform_data - platform data for SMB347 charger
- * @battery_info: Information about the battery
- * @max_charge_current: maximum current (in uA) the battery can be charged
- * @max_charge_voltage: maximum voltage (in uV) the battery can be charged
- * @pre_charge_current: current (in uA) to use in pre-charging phase
- * @termination_current: current (in uA) used to determine when the
- *			 charging cycle terminates
- * @pre_to_fast_voltage: voltage (in uV) treshold used for transitioning to
- *			 pre-charge to fast charge mode
- * @mains_current_limit: maximum input current drawn from AC/DC input (in uA)
- * @usb_hc_current_limit: maximum input high current (in uA) drawn from USB
- *			  input
- * @chip_temp_threshold: die temperature where device starts limiting charge
- *			 current [%100 - %130] (in degree C)
- * @soft_cold_temp_limit: soft cold temperature limit [%0 - %15] (in degree C),
- *			  granularity is 5 deg C.
- * @soft_hot_temp_limit: soft hot temperature limit [%40 - %55] (in degree  C),
- *			 granularity is 5 deg C.
- * @hard_cold_temp_limit: hard cold temperature limit [%-5 - %10] (in degree C),
- *			  granularity is 5 deg C.
- * @hard_hot_temp_limit: hard hot temperature limit [%50 - %65] (in degree C),
- *			 granularity is 5 deg C.
- * @suspend_on_hard_temp_limit: suspend charging when hard limit is hit
- * @soft_temp_limit_compensation: compensation method when soft temperature
- *				  limit is hit
- * @charge_current_compensation: current (in uA) for charging compensation
- *				 current when temperature hits soft limits
- * @use_mains: AC/DC input can be used
- * @use_usb: USB input can be used
- * @use_usb_otg: USB OTG output can be used (not implemented yet)
- * @irq_gpio: GPIO number used for interrupts (%-1 if not used)
- * @enable_control: how charging enable/disable is controlled
- *		    (driver/pin controls)
- *
- * @use_main, @use_usb, and @use_usb_otg are means to enable/disable
- * hardware support for these. This is useful when we want to have for
- * example OTG charging controlled via OTG transceiver driver and not by
- * the SMB347 hardware.
- *
- * Hard and soft temperature limit values are given as described in the
- * device data sheet and assuming NTC beta value is %3750. Even if this is
- * not the case, these values should be used. They can be mapped to the
- * corresponding NTC beta values with the help of table %2 in the data
- * sheet. So for example if NTC beta is %3375 and we want to program hard
- * hot limit to be %53 deg C, @hard_hot_temp_limit should be set to %50.
- *
- * If zero value is given in any of the current and voltage values, the
- * factory programmed default will be used. For soft/hard temperature
- * values, pass in %SMB347_TEMP_USE_DEFAULT instead.
- */
-struct smb347_charger_platform_data {
-	struct power_supply_info battery_info;
-	unsigned int	max_charge_current;
-	unsigned int	max_charge_voltage;
-	unsigned int	pre_charge_current;
-	unsigned int	termination_current;
-	unsigned int	pre_to_fast_voltage;
-	unsigned int	mains_current_limit;
-	unsigned int	usb_hc_current_limit;
-	unsigned int	chip_temp_threshold;
-	int		soft_cold_temp_limit;
-	int		soft_hot_temp_limit;
-	int		hard_cold_temp_limit;
-	int		hard_hot_temp_limit;
-	bool		suspend_on_hard_temp_limit;
-	unsigned int	soft_temp_limit_compensation;
-	unsigned int	charge_current_compensation;
-	bool		use_mains;
-	bool		use_usb;
-	bool		use_usb_otg;
-	int		irq_gpio;
-	enum smb347_chg_enable enable_control;
-};
-
-#endif /* SMB347_CHARGER_H */

include/linux/power_supply.h

@@ -186,6 +186,7 @@ enum power_supply_type {
 	POWER_SUPPLY_TYPE_USB_PD,		/* Power Delivery Port */
 	POWER_SUPPLY_TYPE_USB_PD_DRP,		/* PD Dual Role Port */
 	POWER_SUPPLY_TYPE_APPLE_BRICK_ID,	/* Apple Charging Method */
+	POWER_SUPPLY_TYPE_WIRELESS,		/* Wireless */
 };
 
 enum power_supply_usb_type {
@@ -365,6 +366,12 @@ struct power_supply_battery_info {
 	int constant_charge_voltage_max_uv; /* microVolts */
 	int factory_internal_resistance_uohm;   /* microOhms */
 	int ocv_temp[POWER_SUPPLY_OCV_TEMP_MAX];/* celsius */
+	int temp_ambient_alert_min;             /* celsius */
+	int temp_ambient_alert_max;             /* celsius */
+	int temp_alert_min;                     /* celsius */
+	int temp_alert_max;                     /* celsius */
+	int temp_min;                           /* celsius */
+	int temp_max;                           /* celsius */
 	struct power_supply_battery_ocv_table *ocv_table[POWER_SUPPLY_OCV_TEMP_MAX];
 	int ocv_table_size[POWER_SUPPLY_OCV_TEMP_MAX];
 	struct power_supply_resistance_temp_table *resist_table;