leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
Driver obtains LED devices according to system configuration and creates devices in form: "devicename:color:function", like The full path is to be: /sys/class/leds/mlxreg\:status\:amber/brightness After timer trigger activation: echo timer > /sys/class/leds/mlxreg\:status\:amber/trigger Attributes for LED blinking will appaer in sysfs infrastructure: /sys/class/leds/mlxreg\:status\:amber/delay_off /sys/class/leds/mlxreg\:status\:amber/delay_on LED setting is controlled through the on-board programmable devices, which exports its register map. This device could be attached to any bus type, for which register mapping is supported. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
This commit is contained in:
Vadim Pasternak
Jacek Anaszewski
Родитель
54b6c12724
Коммит
386570d76f
|
|
@ -9003,6 +9003,7 @@ M: Vadim Pasternak <vadimp@mellanox.com>
|
|||
L: linux-leds@vger.kernel.org
|
||||
S: Supported
|
||||
F: drivers/leds/leds-mlxcpld.c
|
||||
F: drivers/leds/leds-mlxreg.c
|
||||
F: Documentation/leds/leds-mlxcpld.txt
|
||||
|
||||
MELLANOX PLATFORM DRIVER
|
||||
|
|
|
|||
|
|
@ -694,6 +694,15 @@ config LEDS_MLXCPLD
|
|||
This option enables support for the LEDs on the Mellanox
|
||||
boards. Say Y to enable these.
|
||||
|
||||
config LEDS_MLXREG
|
||||
tristate "LED support for the Mellanox switches management control"
|
||||
depends on LEDS_CLASS
|
||||
help
|
||||
This option enables support for the LEDs on the Mellanox Ethernet and
|
||||
InfiniBand switches. The driver can be activated by the platform device
|
||||
device add call. Say Y to enable these. To compile this driver as a
|
||||
module, choose 'M' here: the module will be called leds-mlxreg.
|
||||
|
||||
config LEDS_USER
|
||||
tristate "Userspace LED support"
|
||||
depends on LEDS_CLASS
|
||||
|
|
|
|||
|
|
@ -72,6 +72,7 @@ obj-$(CONFIG_LEDS_IS31FL319X) += leds-is31fl319x.o
|
|||
obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o
|
||||
obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o
|
||||
obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o
|
||||
obj-$(CONFIG_LEDS_MLXREG) += leds-mlxreg.o
|
||||
obj-$(CONFIG_LEDS_NIC78BX) += leds-nic78bx.o
|
||||
obj-$(CONFIG_LEDS_MT6323) += leds-mt6323.o
|
||||
obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,281 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
||||
//
|
||||
// Copyright (c) 2018 Mellanox Technologies. All rights reserved.
|
||||
// Copyright (c) 2018 Vadim Pasternak <vadimp@mellanox.com>
|
||||
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/platform_data/mlxreg.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
/* Codes for LEDs. */
|
||||
#define MLXREG_LED_OFFSET_BLINK_3HZ 0x01 /* Offset from solid: 3Hz blink */
|
||||
#define MLXREG_LED_OFFSET_BLINK_6HZ 0x02 /* Offset from solid: 6Hz blink */
|
||||
#define MLXREG_LED_IS_OFF 0x00 /* Off */
|
||||
#define MLXREG_LED_RED_SOLID 0x05 /* Solid red */
|
||||
#define MLXREG_LED_GREEN_SOLID 0x0D /* Solid green */
|
||||
#define MLXREG_LED_AMBER_SOLID 0x09 /* Solid amber */
|
||||
#define MLXREG_LED_BLINK_3HZ 167 /* ~167 msec off/on - HW support */
|
||||
#define MLXREG_LED_BLINK_6HZ 83 /* ~83 msec off/on - HW support */
|
||||
|
||||
/**
|
||||
* struct mlxreg_led_data - led control data:
|
||||
*
|
||||
* @data: led configuration data;
|
||||
* @led_classdev: led class data;
|
||||
* @base_color: base led color (other colors have constant offset from base);
|
||||
* @led_data: led data;
|
||||
* @data_parent: pointer to private device control data of parent;
|
||||
*/
|
||||
struct mlxreg_led_data {
|
||||
struct mlxreg_core_data *data;
|
||||
struct led_classdev led_cdev;
|
||||
u8 base_color;
|
||||
void *data_parent;
|
||||
char led_cdev_name[MLXREG_CORE_LABEL_MAX_SIZE];
|
||||
};
|
||||
|
||||
#define cdev_to_priv(c) container_of(c, struct mlxreg_led_data, led_cdev)
|
||||
|
||||
/**
|
||||
* struct mlxreg_led_priv_data - platform private data:
|
||||
*
|
||||
* @pdev: platform device;
|
||||
* @pdata: platform data;
|
||||
* @access_lock: mutex for attribute IO access;
|
||||
*/
|
||||
struct mlxreg_led_priv_data {
|
||||
struct platform_device *pdev;
|
||||
struct mlxreg_core_platform_data *pdata;
|
||||
struct mutex access_lock; /* protect IO operations */
|
||||
};
|
||||
|
||||
static int
|
||||
mlxreg_led_store_hw(struct mlxreg_led_data *led_data, u8 vset)
|
||||
{
|
||||
struct mlxreg_led_priv_data *priv = led_data->data_parent;
|
||||
struct mlxreg_core_platform_data *led_pdata = priv->pdata;
|
||||
struct mlxreg_core_data *data = led_data->data;
|
||||
u32 regval;
|
||||
u32 nib;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* Each LED is controlled through low or high nibble of the relevant
|
||||
* register byte. Register offset is specified by off parameter.
|
||||
* Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
|
||||
* 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
|
||||
* green.
|
||||
* Parameter mask specifies which nibble is used for specific LED: mask
|
||||
* 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
|
||||
* higher nibble (bits from 4 to 7).
|
||||
*/
|
||||
mutex_lock(&priv->access_lock);
|
||||
|
||||
ret = regmap_read(led_pdata->regmap, data->reg, ®val);
|
||||
if (ret)
|
||||
goto access_error;
|
||||
|
||||
nib = (ror32(data->mask, data->bit) == 0xf0) ? rol32(vset, data->bit) :
|
||||
rol32(vset, data->bit + 4);
|
||||
regval = (regval & data->mask) | nib;
|
||||
|
||||
ret = regmap_write(led_pdata->regmap, data->reg, regval);
|
||||
|
||||
access_error:
|
||||
mutex_unlock(&priv->access_lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static enum led_brightness
|
||||
mlxreg_led_get_hw(struct mlxreg_led_data *led_data)
|
||||
{
|
||||
struct mlxreg_led_priv_data *priv = led_data->data_parent;
|
||||
struct mlxreg_core_platform_data *led_pdata = priv->pdata;
|
||||
struct mlxreg_core_data *data = led_data->data;
|
||||
u32 regval;
|
||||
int err;
|
||||
|
||||
/*
|
||||
* Each LED is controlled through low or high nibble of the relevant
|
||||
* register byte. Register offset is specified by off parameter.
|
||||
* Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
|
||||
* 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
|
||||
* green.
|
||||
* Parameter mask specifies which nibble is used for specific LED: mask
|
||||
* 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
|
||||
* higher nibble (bits from 4 to 7).
|
||||
*/
|
||||
err = regmap_read(led_pdata->regmap, data->reg, ®val);
|
||||
if (err < 0) {
|
||||
dev_warn(led_data->led_cdev.dev, "Failed to get current brightness, error: %d\n",
|
||||
err);
|
||||
/* Assume the LED is OFF */
|
||||
return LED_OFF;
|
||||
}
|
||||
|
||||
regval = regval & ~data->mask;
|
||||
regval = (ror32(data->mask, data->bit) == 0xf0) ? ror32(regval,
|
||||
data->bit) : ror32(regval, data->bit + 4);
|
||||
if (regval >= led_data->base_color &&
|
||||
regval <= (led_data->base_color + MLXREG_LED_OFFSET_BLINK_6HZ))
|
||||
return LED_FULL;
|
||||
|
||||
return LED_OFF;
|
||||
}
|
||||
|
||||
static int
|
||||
mlxreg_led_brightness_set(struct led_classdev *cled, enum led_brightness value)
|
||||
{
|
||||
struct mlxreg_led_data *led_data = cdev_to_priv(cled);
|
||||
|
||||
if (value)
|
||||
return mlxreg_led_store_hw(led_data, led_data->base_color);
|
||||
else
|
||||
return mlxreg_led_store_hw(led_data, MLXREG_LED_IS_OFF);
|
||||
}
|
||||
|
||||
static enum led_brightness
|
||||
mlxreg_led_brightness_get(struct led_classdev *cled)
|
||||
{
|
||||
struct mlxreg_led_data *led_data = cdev_to_priv(cled);
|
||||
|
||||
return mlxreg_led_get_hw(led_data);
|
||||
}
|
||||
|
||||
static int
|
||||
mlxreg_led_blink_set(struct led_classdev *cled, unsigned long *delay_on,
|
||||
unsigned long *delay_off)
|
||||
{
|
||||
struct mlxreg_led_data *led_data = cdev_to_priv(cled);
|
||||
int err;
|
||||
|
||||
/*
|
||||
* HW supports two types of blinking: full (6Hz) and half (3Hz).
|
||||
* For delay on/off zero LED is setting to solid color. For others
|
||||
* combination blinking is to be controlled by the software timer.
|
||||
*/
|
||||
if (!(*delay_on == 0 && *delay_off == 0) &&
|
||||
!(*delay_on == MLXREG_LED_BLINK_3HZ &&
|
||||
*delay_off == MLXREG_LED_BLINK_3HZ) &&
|
||||
!(*delay_on == MLXREG_LED_BLINK_6HZ &&
|
||||
*delay_off == MLXREG_LED_BLINK_6HZ))
|
||||
return -EINVAL;
|
||||
|
||||
if (*delay_on == MLXREG_LED_BLINK_6HZ)
|
||||
err = mlxreg_led_store_hw(led_data, led_data->base_color +
|
||||
MLXREG_LED_OFFSET_BLINK_6HZ);
|
||||
else if (*delay_on == MLXREG_LED_BLINK_3HZ)
|
||||
err = mlxreg_led_store_hw(led_data, led_data->base_color +
|
||||
MLXREG_LED_OFFSET_BLINK_3HZ);
|
||||
else
|
||||
err = mlxreg_led_store_hw(led_data, led_data->base_color);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static int mlxreg_led_config(struct mlxreg_led_priv_data *priv)
|
||||
{
|
||||
struct mlxreg_core_platform_data *led_pdata = priv->pdata;
|
||||
struct mlxreg_core_data *data = led_pdata->data;
|
||||
struct mlxreg_led_data *led_data;
|
||||
struct led_classdev *led_cdev;
|
||||
enum led_brightness brightness;
|
||||
int i;
|
||||
int err;
|
||||
|
||||
for (i = 0; i < led_pdata->counter; i++, data++) {
|
||||
led_data = devm_kzalloc(&priv->pdev->dev, sizeof(*led_data),
|
||||
GFP_KERNEL);
|
||||
if (!led_data)
|
||||
return -ENOMEM;
|
||||
|
||||
led_cdev = &led_data->led_cdev;
|
||||
led_data->data_parent = priv;
|
||||
if (strstr(data->label, "red") ||
|
||||
strstr(data->label, "orange")) {
|
||||
brightness = LED_OFF;
|
||||
led_data->base_color = MLXREG_LED_RED_SOLID;
|
||||
} else if (strstr(data->label, "amber")) {
|
||||
brightness = LED_OFF;
|
||||
led_data->base_color = MLXREG_LED_AMBER_SOLID;
|
||||
} else {
|
||||
brightness = LED_OFF;
|
||||
led_data->base_color = MLXREG_LED_GREEN_SOLID;
|
||||
}
|
||||
sprintf(led_data->led_cdev_name, "%s:%s", "mlxreg",
|
||||
data->label);
|
||||
led_cdev->name = led_data->led_cdev_name;
|
||||
led_cdev->brightness = brightness;
|
||||
led_cdev->max_brightness = LED_ON;
|
||||
led_cdev->brightness_set_blocking =
|
||||
mlxreg_led_brightness_set;
|
||||
led_cdev->brightness_get = mlxreg_led_brightness_get;
|
||||
led_cdev->blink_set = mlxreg_led_blink_set;
|
||||
led_cdev->flags = LED_CORE_SUSPENDRESUME;
|
||||
led_data->data = data;
|
||||
err = devm_led_classdev_register(&priv->pdev->dev, led_cdev);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
if (led_cdev->brightness)
|
||||
mlxreg_led_brightness_set(led_cdev,
|
||||
led_cdev->brightness);
|
||||
dev_info(led_cdev->dev, "label: %s, mask: 0x%02x, offset:0x%02x\n",
|
||||
data->label, data->mask, data->reg);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mlxreg_led_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct mlxreg_core_platform_data *led_pdata;
|
||||
struct mlxreg_led_priv_data *priv;
|
||||
|
||||
led_pdata = dev_get_platdata(&pdev->dev);
|
||||
if (!led_pdata) {
|
||||
dev_err(&pdev->dev, "Failed to get platform data.\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
mutex_init(&priv->access_lock);
|
||||
priv->pdev = pdev;
|
||||
priv->pdata = led_pdata;
|
||||
|
||||
return mlxreg_led_config(priv);
|
||||
}
|
||||
|
||||
static int mlxreg_led_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct mlxreg_led_priv_data *priv = dev_get_drvdata(&pdev->dev);
|
||||
|
||||
mutex_destroy(&priv->access_lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver mlxreg_led_driver = {
|
||||
.driver = {
|
||||
.name = "leds-mlxreg",
|
||||
},
|
||||
.probe = mlxreg_led_probe,
|
||||
.remove = mlxreg_led_remove,
|
||||
};
|
||||
|
||||
module_platform_driver(mlxreg_led_driver);
|
||||
|
||||
MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
|
||||
MODULE_DESCRIPTION("Mellanox LED regmap driver");
|
||||
MODULE_LICENSE("Dual BSD/GPL");
|
||||
MODULE_ALIAS("platform:leds-mlxreg");
|
||||
Загрузка…
Ссылка в новой задаче