From b358c6cf029cb67b3ed9cc367fb46f1fa3228c5b Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 30 Apr 2013 10:44:51 +0300 Subject: [PATCH 001/429] fbdev/ps3fb: fix compile warning Commit 11bd5933abe0 ("fbdev/ps3fb: use vm_iomap_memory()") introduced the following warning: drivers/video/ps3fb.c: In function 'ps3fb_mmap': drivers/video/ps3fb.c:712:2: warning: suggest parentheses around '+' inside '<<' [-Wparentheses] Fix this by adding the parentheses. Signed-off-by: Tomi Valkeinen --- drivers/video/ps3fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c index d9f08c653d62..dbfe2c18a434 100644 --- a/drivers/video/ps3fb.c +++ b/drivers/video/ps3fb.c @@ -710,7 +710,7 @@ static int ps3fb_mmap(struct fb_info *info, struct vm_area_struct *vma) r = vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len); dev_dbg(info->device, "ps3fb: mmap framebuffer P(%lx)->V(%lx)\n", - info->fix.smem_start + vma->vm_pgoff << PAGE_SHIFT, + info->fix.smem_start + (vma->vm_pgoff << PAGE_SHIFT), vma->vm_start); return r; From 31d6eebf7e079cfb5e98e65d5af4c6de093e076c Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 2 May 2013 10:19:11 -0400 Subject: [PATCH 002/429] regulator: Fix kernel-doc generation warnings. Add a couple kernel-doc lines to get rid of kernel-doc generation warnings, no functional change. Signed-off-by: Robert P. J. Day Signed-off-by: Mark Brown --- drivers/regulator/core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 6e5017841582..014c92a5434d 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1539,7 +1539,10 @@ static void regulator_ena_gpio_free(struct regulator_dev *rdev) } /** - * Balance enable_count of each GPIO and actual GPIO pin control. + * regulator_ena_gpio_ctrl - balance enable_count of each GPIO and actual GPIO pin control + * @rdev: regulator_dev structure + * @enable: enable GPIO at initial use? + * * GPIO is enabled in case of initial use. (enable_count is 0) * GPIO is disabled when it is not shared any more. (enable_count <= 1) */ From 3d75095a533aa3bbad652369ffde4c129781b8ec Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 8 May 2013 16:35:10 +0530 Subject: [PATCH 003/429] regulator: dbx500: Make local symbol static power_state_active_get is used only in this file. Make it static. While at it also move this function definition inside the CONFIG_REGULATOR_DEBUG macro as it is called only from within it. This also avoids further build warning related to unused definition. Signed-off-by: Sachin Kamat Signed-off-by: Mark Brown --- drivers/regulator/dbx500-prcmu.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/regulator/dbx500-prcmu.c b/drivers/regulator/dbx500-prcmu.c index 89bd2faaef8c..ce89f7848a57 100644 --- a/drivers/regulator/dbx500-prcmu.c +++ b/drivers/regulator/dbx500-prcmu.c @@ -24,18 +24,6 @@ static int power_state_active_cnt; /* will initialize to zero */ static DEFINE_SPINLOCK(power_state_active_lock); -int power_state_active_get(void) -{ - unsigned long flags; - int cnt; - - spin_lock_irqsave(&power_state_active_lock, flags); - cnt = power_state_active_cnt; - spin_unlock_irqrestore(&power_state_active_lock, flags); - - return cnt; -} - void power_state_active_enable(void) { unsigned long flags; @@ -65,6 +53,18 @@ out: #ifdef CONFIG_REGULATOR_DEBUG +static int power_state_active_get(void) +{ + unsigned long flags; + int cnt; + + spin_lock_irqsave(&power_state_active_lock, flags); + cnt = power_state_active_cnt; + spin_unlock_irqrestore(&power_state_active_lock, flags); + + return cnt; +} + static struct ux500_regulator_debug { struct dentry *dir; struct dentry *status_file; From 625cdd78d119d5848ac3c47d129bdf5f23f64120 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 11 May 2013 19:13:49 +0300 Subject: [PATCH 004/429] svcauth_gss: fix error code in use_gss_proxy() This should return zero on success and -EBUSY on error so the type needs to be int instead of bool. Signed-off-by: Dan Carpenter Signed-off-by: J. Bruce Fields --- net/sunrpc/auth_gss/svcauth_gss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index 871c73c92165..2c6a1ece54bf 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -1287,7 +1287,7 @@ static bool use_gss_proxy(struct net *net) #ifdef CONFIG_PROC_FS -static bool set_gss_proxy(struct net *net, int type) +static int set_gss_proxy(struct net *net, int type) { struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); int ret = 0; From 3fab70c165795431f00ddf9be8b84ddd07bd1f8f Mon Sep 17 00:00:00 2001 From: Lingzhu Xiang Date: Fri, 10 May 2013 18:29:21 +0800 Subject: [PATCH 005/429] efivarfs: Never return ENOENT from firmware again Previously in 1fa7e69 efi_status_to_err() translated firmware status EFI_NOT_FOUND to -EIO instead of -ENOENT for efivarfs operations to avoid confusion. After refactoring in e14ab23, it is also used in other places where the translation may be unnecessary. So move the translation to efivarfs specific code. Also return EOF for reading zero-length files, which is what users would expect. Cc: Josh Boyer Cc: Jeremy Kerr Cc: Lee, Chun-Yi Cc: Andy Whitcroft Signed-off-by: Lingzhu Xiang Signed-off-by: Matt Fleming --- fs/efivarfs/file.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/fs/efivarfs/file.c b/fs/efivarfs/file.c index bfb531564319..8dd524f32284 100644 --- a/fs/efivarfs/file.c +++ b/fs/efivarfs/file.c @@ -44,8 +44,11 @@ static ssize_t efivarfs_file_write(struct file *file, bytes = efivar_entry_set_get_size(var, attributes, &datasize, data, &set); - if (!set && bytes) + if (!set && bytes) { + if (bytes == -ENOENT) + bytes = -EIO; goto out; + } if (bytes == -ENOENT) { drop_nlink(inode); @@ -76,7 +79,14 @@ static ssize_t efivarfs_file_read(struct file *file, char __user *userbuf, int err; err = efivar_entry_size(var, &datasize); - if (err) + + /* + * efivarfs represents uncommitted variables with + * zero-length files. Reading them should return EOF. + */ + if (err == -ENOENT) + return 0; + else if (err) return err; data = kmalloc(datasize + sizeof(attributes), GFP_KERNEL); From d51df2c5d3c1f2c639708fc644ed67296bb51dc5 Mon Sep 17 00:00:00 2001 From: Seiji Aguchi Date: Fri, 10 May 2013 20:45:36 +0000 Subject: [PATCH 006/429] efivar: fix oops in efivar_update_sysfs_entries() caused by memory reuse The loop in efivar_update_sysfs_entries() reuses the same allocation for entries each time it calls efivar_create_sysfs_entry(entry). This is wrong because efivar_create_sysfs_entry() expects to keep the memory it was passed, so the caller may not free it (and may not pass the same memory in multiple times). This leads to the oops below. Fix by getting a new allocation each time we go around the loop. ---[ end trace ba4907d5c519d111 ]--- BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] efivar_entry_find+0x14f/0x2d0 PGD 0 Oops: 0000 [#2] SMP Modules linked in: oops(OF+) ebtable_nat ebtables xt_CHECKSUM [...] CPU: 0 PID: 301 Comm: kworker/0:2 Tainted: GF D O 3.9.0+ #1 Hardware name: LENOVO 4291EV7/4291EV7, BIOS 8DET52WW (1.22 ) 09/15/2011 Workqueue: events efivar_update_sysfs_entries task: ffff8801955920c0 ti: ffff88019413e000 task.ti: ffff88019413e000 RIP: 0010:[] [] efivar_entry_find+0x14f/0x2d0 RSP: 0018:ffff88019413fa48 EFLAGS: 00010006 RAX: 0000000000000000 RBX: ffff880195d87c00 RCX: ffffffff81ab6f60 RDX: ffff88019413fb88 RSI: 0000000000000400 RDI: ffff880196254000 RBP: ffff88019413fbd8 R08: 0000000000000000 R09: ffff8800dad99037 R10: ffff880195d87c00 R11: 0000000000000430 R12: ffffffff81ab6f60 R13: fffffffffffff7d8 R14: ffff880196254000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88019e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000001a0b000 CR4: 00000000000407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88019413fb78 ffff88019413fb88 ffffffff81e85d60 03000000972b5c00 ffff88019413fa29 ffffffff81e85d60 ffff88019413fbfb 0000000197087280 00000000000000fe 0000000000000001 ffffffff81e85dd9 ffff880197087280 Call Trace: [] ? idr_get_empty_slot+0x131/0x240 [] ? put_dec+0x72/0x90 [] ? cache_alloc_refill+0x170/0x2f0 [] efivar_update_sysfs_entry+0x150/0x220 [] ? efi_call2+0x9/0x70 [] ? virt_efi_get_next_variable+0x47/0x1b0 [] ? kmem_cache_alloc_trace+0x1af/0x1c0 [] efivar_init+0x2c3/0x380 [] ? efivar_delete+0xd0/0xd0 [] efivar_update_sysfs_entries+0x6f/0x90 [] process_one_work+0x183/0x490 [] worker_thread+0x120/0x3a0 [] ? manage_workers+0x160/0x160 [] kthread+0xce/0xe0 [] ? kthread_freezable_should_stop+0x70/0x70 [] ret_from_fork+0x7c/0xb0 [] ? kthread_freezable_should_stop+0x70/0x70 Code: 8d 55 b0 48 8d 45 a0 49 81 ed 28 08 00 00 48 89 95 78 fe [...] RIP [] efivar_entry_find+0x14f/0x2d0 RSP CR2: 0000000000000000 ---[ end trace ba4907d5c519d112 ]--- Cc: James Bottomley Cc: Tomoki Sekiyama Signed-off-by: Seiji Aguchi Signed-off-by: Matt Fleming --- drivers/firmware/efi/efivars.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/firmware/efi/efivars.c b/drivers/firmware/efi/efivars.c index b623c599e572..8bd1bb6dbe47 100644 --- a/drivers/firmware/efi/efivars.c +++ b/drivers/firmware/efi/efivars.c @@ -523,13 +523,11 @@ static void efivar_update_sysfs_entries(struct work_struct *work) struct efivar_entry *entry; int err; - entry = kzalloc(sizeof(*entry), GFP_KERNEL); - if (!entry) - return; - /* Add new sysfs entries */ while (1) { - memset(entry, 0, sizeof(*entry)); + entry = kzalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) + return; err = efivar_init(efivar_update_sysfs_entry, entry, true, false, &efivar_sysfs_list); From 286233e604d79f0c7fa04abec2180d5d89a74749 Mon Sep 17 00:00:00 2001 From: Horia Geanta Date: Fri, 10 May 2013 15:08:39 +0300 Subject: [PATCH 007/429] crypto: caam - fix inconsistent assoc dma mapping direction req->assoc is dma mapped BIDIRECTIONAL and unmapped TO_DEVICE. Since it is read-only for the device, use TO_DEVICE both for mapping and unmapping. Cc: # 3.9, 3.8 Signed-off-by: Horia Geanta Signed-off-by: Herbert Xu --- drivers/crypto/caam/caamalg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index 765fdf5ce579..bf416a8391a7 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -1154,7 +1154,7 @@ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req, dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained); sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1, - DMA_BIDIRECTIONAL, assoc_chained); + DMA_TO_DEVICE, assoc_chained); if (likely(req->src == req->dst)) { sgc = dma_map_sg_chained(jrdev, req->src, src_nents ? : 1, DMA_BIDIRECTIONAL, src_chained); @@ -1336,7 +1336,7 @@ static struct aead_edesc *aead_giv_edesc_alloc(struct aead_givcrypt_request dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained); sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1, - DMA_BIDIRECTIONAL, assoc_chained); + DMA_TO_DEVICE, assoc_chained); if (likely(req->src == req->dst)) { sgc = dma_map_sg_chained(jrdev, req->src, src_nents ? : 1, DMA_BIDIRECTIONAL, src_chained); From 972be324fe0adaa67717407510aa067a4ae53d2d Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 14 May 2013 09:06:17 +0200 Subject: [PATCH 008/429] microblaze: Initialize temp variable to remove compilation warning Compilation warning: arch/microblaze/kernel/cpu/cache.c:148:2: warning: 'temp' is used uninitialized in this function [-Wuninitialized] Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index 4254514b4c8c..a6e44410672d 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -140,7 +140,7 @@ do { \ /* It is used only first parameter for OP - for wic, wdc */ #define CACHE_RANGE_LOOP_1(start, end, line_length, op) \ do { \ - int volatile temp; \ + int volatile temp = 0; \ int align = ~(line_length - 1); \ end = ((end & align) == end) ? end - line_length : end & align; \ WARN_ON(end - start < 0); \ From eccaf52fee8305d5207ff110950a82c100e459bc Mon Sep 17 00:00:00 2001 From: "Lee, Chun-Yi" Date: Thu, 2 May 2013 22:07:01 +0800 Subject: [PATCH 009/429] x86, efi: initial the local variable of DataSize to zero That will be better initial the value of DataSize to zero for the input of GetVariable(), otherwise we will feed a random value. The debug log of input DataSize like this: ... [ 195.915612] EFI Variables Facility v0.08 2004-May-17 [ 195.915819] efi: size: 18446744071581821342 [ 195.915969] efi: size': 18446744071581821342 [ 195.916324] efi: size: 18446612150714306560 [ 195.916632] efi: size': 18446612150714306560 [ 195.917159] efi: size: 18446612150714306560 [ 195.917453] efi: size': 18446612150714306560 ... The size' is value that was returned by BIOS. After applied this patch: [ 82.442042] EFI Variables Facility v0.08 2004-May-17 [ 82.442202] efi: size: 0 [ 82.442360] efi: size': 1039 [ 82.443828] efi: size: 0 [ 82.444127] efi: size': 2616 [ 82.447057] efi: size: 0 [ 82.447356] efi: size': 5832 ... Found on Acer Aspire V3 BIOS, it will not return the size of data if we input a non-zero DataSize. Cc: Matthew Garrett Cc: H. Peter Anvin Signed-off-by: Lee, Chun-Yi Signed-off-by: Matt Fleming --- arch/x86/platform/efi/efi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 55856b2310d3..82089d8b1954 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -206,7 +206,7 @@ static efi_status_t virt_efi_get_next_variable(unsigned long *name_size, } if (boot_used_size && !finished) { - unsigned long size; + unsigned long size = 0; u32 attr; efi_status_t s; void *tmp; From d6cbf35dac8a3dadb9103379820c96d7c85df3d9 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 14 May 2013 19:44:20 +0800 Subject: [PATCH 010/429] cgroup: initialize xattr before calling d_instantiate() cgroup_create_file() calls d_instantiate(), which may decide to look at the xattrs on the file. Smack always does this and SELinux can be configured to do so. But cgroup_add_file() didn't initialize xattrs before calling cgroup_create_file(), which finally leads to dereferencing NULL dentry->d_fsdata. This bug has been there since cgroup xattr was introduced. Cc: # 3.8.x Reported-by: Ivan Bulatovic Reported-by: Casey Schaufler Signed-off-by: Li Zefan Signed-off-by: Tejun Heo --- kernel/cgroup.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 2a9926275f80..38b136553044 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2699,13 +2699,14 @@ static int cgroup_add_file(struct cgroup *cgrp, struct cgroup_subsys *subsys, goto out; } + cfe->type = (void *)cft; + cfe->dentry = dentry; + dentry->d_fsdata = cfe; + simple_xattrs_init(&cfe->xattrs); + mode = cgroup_file_mode(cft); error = cgroup_create_file(dentry, mode | S_IFREG, cgrp->root->sb); if (!error) { - cfe->type = (void *)cft; - cfe->dentry = dentry; - dentry->d_fsdata = cfe; - simple_xattrs_init(&cfe->xattrs); list_add_tail(&cfe->node, &parent->files); cfe = NULL; } From de82b923012ff8790bcfff381eb3ca9069d00f49 Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Tue, 14 May 2013 11:25:39 -0400 Subject: [PATCH 011/429] fuse: allocate for_background dio requests based on io->async state Commit 8b41e671 introduced explicit background checking for fuse_req structures with BUG_ON() checks for the appropriate type of request in in the associated send functions. Commit bcba24cc introduced the ability to send dio requests as background requests but does not update the request allocation based on the type of I/O request. As a result, a BUG_ON() triggers in the fuse_request_send_background() background path if an async I/O is sent. Allocate a request based on the async state of the fuse_io_priv to avoid the BUG. Signed-off-by: Brian Foster Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index d1c9b85b3f58..fe191325fefa 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1278,7 +1278,10 @@ ssize_t fuse_direct_io(struct fuse_io_priv *io, const struct iovec *iov, iov_iter_init(&ii, iov, nr_segs, count, 0); - req = fuse_get_req(fc, fuse_iter_npages(&ii)); + if (io->async) + req = fuse_get_req_for_background(fc, fuse_iter_npages(&ii)); + else + req = fuse_get_req(fc, fuse_iter_npages(&ii)); if (IS_ERR(req)) return PTR_ERR(req); @@ -1314,7 +1317,11 @@ ssize_t fuse_direct_io(struct fuse_io_priv *io, const struct iovec *iov, break; if (count) { fuse_put_request(fc, req); - req = fuse_get_req(fc, fuse_iter_npages(&ii)); + if (io->async) + req = fuse_get_req_for_background(fc, + fuse_iter_npages(&ii)); + else + req = fuse_get_req(fc, fuse_iter_npages(&ii)); if (IS_ERR(req)) break; } From 8c3d3d4b12bf8de8c59fe1eb1bf866a8676ca309 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 14 May 2013 11:09:50 -0700 Subject: [PATCH 012/429] libata: update "Maintained by:" tags Jeff moved on to a greener pasture. s/Maintained by: Jeff Garzik/Maintained by: Tejun Heo/g Signed-off-by: Tejun Heo Cc: Jeff Garzik --- drivers/ata/acard-ahci.c | 2 +- drivers/ata/ahci.c | 2 +- drivers/ata/ahci.h | 2 +- drivers/ata/ata_piix.c | 2 +- drivers/ata/libahci.c | 2 +- drivers/ata/libata-core.c | 2 +- drivers/ata/libata-eh.c | 2 +- drivers/ata/libata-scsi.c | 2 +- drivers/ata/libata-sff.c | 2 +- drivers/ata/pdc_adma.c | 2 +- drivers/ata/sata_promise.c | 2 +- drivers/ata/sata_sil.c | 2 +- drivers/ata/sata_sx4.c | 2 +- drivers/ata/sata_via.c | 2 +- 14 files changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c index 4e94ba29cb8d..9d0cf019ce59 100644 --- a/drivers/ata/acard-ahci.c +++ b/drivers/ata/acard-ahci.c @@ -2,7 +2,7 @@ /* * acard-ahci.c - ACard AHCI SATA support * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 251e57d38942..21808766140a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1,7 +1,7 @@ /* * ahci.c - AHCI SATA support * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index b830e6c9fe49..10b14d45cfd2 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -1,7 +1,7 @@ /* * ahci.h - Common AHCI SATA definitions and declarations * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 2f48123d74c4..26bda6ed9a00 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1,7 +1,7 @@ /* * ata_piix.c - Intel PATA/SATA controllers * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 34c82167b962..a70ff154f586 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1,7 +1,7 @@ /* * libahci.c - Common AHCI SATA low-level routines * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 63c743baf920..d35524c33905 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1,7 +1,7 @@ /* * libata-core.c - helper library for ATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index f9476fb3ac43..c69fcce505c0 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1,7 +1,7 @@ /* * libata-eh.c - libata error handling * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index dd310b27b24c..0101af541436 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1,7 +1,7 @@ /* * libata-scsi.c - helper library for ATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index d8af325a6bda..b603720b877d 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1,7 +1,7 @@ /* * libata-sff.c - helper library for PCI IDE BMDMA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index 505333340ad5..8ea6e6afd041 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -1,7 +1,7 @@ /* * pdc_adma.c - Pacific Digital Corporation ADMA * - * Maintained by: Mark Lord + * Maintained by: Tejun Heo * * Copyright 2005 Mark Lord * diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index fb0dd87f8893..958ba2a420c3 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -1,7 +1,7 @@ /* * sata_promise.c - Promise SATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Mikael Pettersson * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index a7b31672c4b7..0ae3ca4bf5c0 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -1,7 +1,7 @@ /* * sata_sil.c - Silicon Image SATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 7b7127a58f51..9947010afc0f 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -1,7 +1,7 @@ /* * sata_sx4.c - Promise SATA * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 5913ea9d57b2..87f056e54a9d 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -1,7 +1,7 @@ /* * sata_via.c - VIA Serial ATA controllers * - * Maintained by: Jeff Garzik + * Maintained by: Tejun Heo * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * From fca8c90d519dedd4f4b19901d005c243f7f0bf2e Mon Sep 17 00:00:00 2001 From: "Chew, Chiau Ee" Date: Thu, 16 May 2013 15:33:29 +0800 Subject: [PATCH 013/429] ata_piix: add PCI IDs for Intel BayTail Adds IDE-mode SATA Device IDs for the Intel BayTrail platform. Signed-off-by: Chew, Chiau Ee Signed-off-by: Artem Bityutskiy Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/ata_piix.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 26bda6ed9a00..9a8a674e8fac 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -151,6 +151,7 @@ enum piix_controller_ids { piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */ ich8_sata_snb, ich8_2port_sata_snb, + ich8_2port_sata_byt, }; struct piix_map_db { @@ -334,6 +335,9 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x8d60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, /* SATA Controller IDE (Wellsburg) */ { 0x8086, 0x8d68, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (BayTrail) */ + { 0x8086, 0x0F20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt }, + { 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt }, { } /* terminate list */ }; @@ -441,6 +445,7 @@ static const struct piix_map_db *piix_map_db_table[] = { [tolapai_sata] = &tolapai_map_db, [ich8_sata_snb] = &ich8_map_db, [ich8_2port_sata_snb] = &ich8_2port_map_db, + [ich8_2port_sata_byt] = &ich8_2port_map_db, }; static struct pci_bits piix_enable_bits[] = { @@ -1254,6 +1259,16 @@ static struct ata_port_info piix_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &piix_sata_ops, }, + + [ich8_2port_sata_byt] = + { + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR | PIIX_FLAG_PIO16, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, + }; #define AHCI_PCI_BAR 5 From 6211dd12da609bc6893b9c3182630b494737ec4b Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Fri, 17 May 2013 13:43:04 +0200 Subject: [PATCH 014/429] mac80211: fix direct probe auth We send direct probe to broadcast address, as some APs do not respond to unicast PROBE frames when unassociated. Broadcast frames are not acked, so we can not use that for trigger MLME state machine, but we need to use old timeout mechanism. This fixes authentication timed out like below: [ 1024.671974] wlan6: authenticate with 54:e6:fc:98:63:fe [ 1024.694125] wlan6: direct probe to 54:e6:fc:98:63:fe (try 1/3) [ 1024.695450] wlan6: direct probe to 54:e6:fc:98:63:fe (try 2/3) [ 1024.700586] wlan6: send auth to 54:e6:fc:98:63:fe (try 3/3) [ 1024.701441] wlan6: authentication with 54:e6:fc:98:63:fe timed out With fix, we have: [ 4524.198978] wlan6: authenticate with 54:e6:fc:98:63:fe [ 4524.220692] wlan6: direct probe to 54:e6:fc:98:63:fe (try 1/3) [ 4524.421784] wlan6: send auth to 54:e6:fc:98:63:fe (try 2/3) [ 4524.423272] wlan6: authenticated [ 4524.423811] wlan6: associate with 54:e6:fc:98:63:fe (try 1/3) [ 4524.427492] wlan6: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=1) Cc: stable@vger.kernel.org # 3.9 Signed-off-by: Stanislaw Gruszka Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a46e490f20dd..a8c2130c8ba4 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3321,10 +3321,6 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) if (WARN_ON_ONCE(!auth_data)) return -EINVAL; - if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) - tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | - IEEE80211_TX_INTFL_MLME_CONN_TX; - auth_data->tries++; if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) { @@ -3358,6 +3354,10 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) auth_data->expected_transaction = trans; } + if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) + tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | + IEEE80211_TX_INTFL_MLME_CONN_TX; + ieee80211_send_auth(sdata, trans, auth_data->algorithm, status, auth_data->data, auth_data->data_len, auth_data->bss->bssid, @@ -3381,12 +3381,12 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) * will not answer to direct packet in unassociated state. */ ieee80211_send_probe_req(sdata, NULL, ssidie + 2, ssidie[1], - NULL, 0, (u32) -1, true, tx_flags, + NULL, 0, (u32) -1, true, 0, auth_data->bss->channel, false); rcu_read_unlock(); } - if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) { + if (tx_flags == 0) { auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; ifmgd->auth_data->timeout_started = true; run_again(ifmgd, auth_data->timeout); From fbe06b7bae7c9cf6ab05168fce5ee93b2f4bae7c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 17 May 2013 11:49:10 -0700 Subject: [PATCH 015/429] x86, range: fix missing merge during add range MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Christian found v3.9 does not work with E350 with EFI is enabled. [ 1.658832] Trying to unpack rootfs image as initramfs... [ 1.679935] BUG: unable to handle kernel paging request at ffff88006e3fd000 [ 1.686940] IP: [] memset+0x1f/0xb0 [ 1.692010] PGD 1f77067 PUD 1f7a067 PMD 61420067 PTE 0 but early memtest report all memory could be accessed without problem. early page table is set in following sequence: [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] init_memory_mapping: [mem 0x6e600000-0x6e7fffff] [ 0.000000] init_memory_mapping: [mem 0x6c000000-0x6e5fffff] [ 0.000000] init_memory_mapping: [mem 0x00100000-0x6bffffff] [ 0.000000] init_memory_mapping: [mem 0x6e800000-0x6ea07fff] but later efi_enter_virtual_mode try set mapping again wrongly. [ 0.010644] pid_max: default: 32768 minimum: 301 [ 0.015302] init_memory_mapping: [mem 0x640c5000-0x6e3fcfff] that means it fails with pfn_range_is_mapped. It turns out that we have a bug in add_range_with_merge and it does not merge range properly when new add one fill the hole between two exsiting ranges. In the case when [mem 0x00100000-0x6bffffff] is the hole between [mem 0x00000000-0x000fffff] and [mem 0x6c000000-0x6e7fffff]. Fix the add_range_with_merge by calling itself recursively. Reported-by: "Christian König" Signed-off-by: Yinghai Lu Link: http://lkml.kernel.org/r/CAE9FiQVofGoSk7q5-0irjkBxemqK729cND4hov-1QCBJDhxpgQ@mail.gmail.com Cc: v3.9 Signed-off-by: H. Peter Anvin --- kernel/range.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/kernel/range.c b/kernel/range.c index 071b0ab455cb..eb911dbce267 100644 --- a/kernel/range.c +++ b/kernel/range.c @@ -48,9 +48,11 @@ int add_range_with_merge(struct range *range, int az, int nr_range, final_start = min(range[i].start, start); final_end = max(range[i].end, end); - range[i].start = final_start; - range[i].end = final_end; - return nr_range; + /* clear it and add it back for further merge */ + range[i].start = 0; + range[i].end = 0; + return add_range_with_merge(range, az, nr_range, + final_start, final_end); } /* Need to add it: */ From 57a9c7609d7418ce75324df38f66cd7d937a77cb Mon Sep 17 00:00:00 2001 From: Clement Chauplannaz Date: Sun, 12 May 2013 21:08:52 +0200 Subject: [PATCH 016/429] scripts/config: fix assignment of parameters for short version of --*-after options When --*-after options are used, two parameters are parsed from the command-line before the adequate function is called: - the `before' option, after which the new option will be inserted, - the name of the option to enable/disable/modularise. With the short version of --*-after options (namely -E, -D, -M), the parsing step is not performed which leads to processing unset variables. Add options -E, -D, -M to the test that triggers assignment of parameters for --*-after options. Signed-off-by: Clement Chauplannaz Acked-by: Andi Kleen Signed-off-by: Yann E. MORIN --- scripts/config | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/config b/scripts/config index bb4d3deb6d1c..a65ecbbdd32a 100755 --- a/scripts/config +++ b/scripts/config @@ -105,7 +105,7 @@ while [ "$1" != "" ] ; do ;; --refresh) ;; - --*-after) + --*-after|-E|-D|-M) checkarg "$1" A=$ARG checkarg "$2" From 3d15aacbb802af72b4ff0c3ba576536cdb3bace0 Mon Sep 17 00:00:00 2001 From: Andrew Bresticker Date: Sun, 19 May 2013 22:58:07 -0700 Subject: [PATCH 017/429] ASoC: max98090: request IRQF_ONESHOT interrupt request_threaded_irq() rejects calls which both do not specify a handler (indicating that the primary IRQ handler should be used) and do not set IRQF_ONESHOT because the combination is unsafe with level-triggered interrupts. It is safe in this case, though, since max98090 IRQs are edge-triggered and the interrupts aren't ACK'ed until the codec's IRQ status register is read. Because of this, an IRQF_ONESHOT interrupt doesn't really make a difference, but request one anyway in order to make request_threaded_irq() happy. Signed-off-by: Andrew Bresticker Signed-off-by: Mark Brown --- sound/soc/codecs/max98090.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index ce0d36412c97..8d14a76c7249 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -2233,7 +2233,7 @@ static int max98090_probe(struct snd_soc_codec *codec) dev_dbg(codec->dev, "irq = %d\n", max98090->irq); ret = request_threaded_irq(max98090->irq, NULL, - max98090_interrupt, IRQF_TRIGGER_FALLING, + max98090_interrupt, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "max98090_interrupt", codec); if (ret < 0) { dev_err(codec->dev, "request_irq failed: %d\n", From 2c071ed7c3660992951abe4b560359058ce41f68 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 20 May 2013 08:33:54 +0100 Subject: [PATCH 018/429] ASoC: soc-compress: Send correct stream event for capture start Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- sound/soc/soc-compress.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index 3853f7eb3f28..06a8000aa07b 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -220,8 +220,12 @@ static int soc_compr_set_params(struct snd_compr_stream *cstream, goto err; } - snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_PLAYBACK, - SND_SOC_DAPM_STREAM_START); + if (cstream->direction == SND_COMPRESS_PLAYBACK) + snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_PLAYBACK, + SND_SOC_DAPM_STREAM_START); + else + snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_CAPTURE, + SND_SOC_DAPM_STREAM_START); /* cancel any delayed stream shutdown that is pending */ rtd->pop_wait = 0; From 3634a6327815d39dd93e5c44a602daae91c66297 Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Fri, 17 May 2013 09:30:32 -0400 Subject: [PATCH 019/429] fuse: truncate pagecache range on hole punch fuse supports hole punch via the fallocate() FALLOC_FL_PUNCH_HOLE interface. When a hole punch is passed through, the page cache is not cleared and thus allows reading stale data from the cache. This is easily demonstrable (using FOPEN_KEEP_CACHE) by reading a smallish random data file into cache, punching a hole and creating a copy of the file. Drop caches or remount and observe that the original file no longer matches the file copied after the hole punch. The original file contains a zeroed range and the latter file contains stale data. Protect against writepage requests in progress and punch out the associated page cache range after a successful client fs hole punch. Signed-off-by: Brian Foster Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index fe191325fefa..a200a2d80377 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -16,6 +16,7 @@ #include #include #include +#include static const struct file_operations fuse_direct_io_file_operations; @@ -2453,6 +2454,7 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, loff_t length) { struct fuse_file *ff = file->private_data; + struct inode *inode = file->f_inode; struct fuse_conn *fc = ff->fc; struct fuse_req *req; struct fuse_fallocate_in inarg = { @@ -2466,9 +2468,16 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, if (fc->no_fallocate) return -EOPNOTSUPP; + if (mode & FALLOC_FL_PUNCH_HOLE) { + mutex_lock(&inode->i_mutex); + fuse_set_nowrite(inode); + } + req = fuse_get_req_nopages(fc); - if (IS_ERR(req)) - return PTR_ERR(req); + if (IS_ERR(req)) { + err = PTR_ERR(req); + goto out; + } req->in.h.opcode = FUSE_FALLOCATE; req->in.h.nodeid = ff->nodeid; @@ -2483,6 +2492,15 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, } fuse_put_request(fc, req); +out: + if (mode & FALLOC_FL_PUNCH_HOLE) { + if (!err) + truncate_pagecache_range(inode, offset, + offset + length - 1); + fuse_release_nowrite(inode); + mutex_unlock(&inode->i_mutex); + } + return err; } From bee6c307800bbb26ba1a855b1841c2f0c4b7622a Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Fri, 17 May 2013 15:27:34 -0400 Subject: [PATCH 020/429] fuse: update inode size and invalidate attributes on fallocate An fallocate request without FALLOC_FL_KEEP_SIZE set can extend the size of a file. Update the inode size after a successful fallocate. Also invalidate the inode attributes after a successful fallocate to ensure we pick up the latest attribute values (i.e., i_blocks). Signed-off-by: Brian Foster Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index a200a2d80377..d9f467907791 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2492,11 +2492,20 @@ static long fuse_file_fallocate(struct file *file, int mode, loff_t offset, } fuse_put_request(fc, req); + if (err) + goto out; + + /* we could have extended the file */ + if (!(mode & FALLOC_FL_KEEP_SIZE)) + fuse_write_update_size(inode, offset + length); + + if (mode & FALLOC_FL_PUNCH_HOLE) + truncate_pagecache_range(inode, offset, offset + length - 1); + + fuse_invalidate_attr(inode); + out: if (mode & FALLOC_FL_PUNCH_HOLE) { - if (!err) - truncate_pagecache_range(inode, offset, - offset + length - 1); fuse_release_nowrite(inode); mutex_unlock(&inode->i_mutex); } From 7ec892ef5f1bd707e2d5ab128069cb6af75c7f07 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Wed, 10 Apr 2013 19:30:38 +0900 Subject: [PATCH 021/429] ARM: dts: Enabling samsung-usb2phy driver for exynos5250 Adding usbphy node for Exynos5250 along with the necessary device data to be parsed. Signed-off-by: Vivek Gautam Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 98dfc3ea5c0b..0673524238a6 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -497,6 +497,21 @@ clock-names = "usbhost"; }; + usbphy@12130000 { + compatible = "samsung,exynos5250-usb2phy"; + reg = <0x12130000 0x100>; + clocks = <&clock 1>, <&clock 285>; + clock-names = "ext_xtal", "usbhost"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbphy-sys { + reg = <0x10040704 0x8>, + <0x10050230 0x4>; + }; + }; + amba { #address-cells = <1>; #size-cells = <1>; From 62cc4d595fe96106ff793cbebbff051179d7619e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 20 May 2013 11:28:35 -0500 Subject: [PATCH 022/429] ASoC: wm5110: Add missing speaker initialisation Add callback to initialise the speaker in the core following the recent changes to handling of integration with the thermal interrupts. Signed-off-by: Mark Brown --- sound/soc/codecs/wm5110.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index 731884e04776..c00480bdf824 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -976,6 +976,8 @@ static int wm5110_codec_probe(struct snd_soc_codec *codec) if (ret != 0) return ret; + arizona_init_spk(codec); + snd_soc_dapm_disable_pin(&codec->dapm, "HAPTICS"); priv->core.arizona->dapm = &codec->dapm; From be646c2d2ba8e2e56596d72633705f8286698c25 Mon Sep 17 00:00:00 2001 From: Joern Engel Date: Wed, 15 May 2013 00:44:07 -0700 Subject: [PATCH 023/429] target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmds Drop unused transport_wait_for_tasks() check in target_wait_for_sess_cmds shutdown code, and convert tcm_qla2xxx + ib_srpt fabric drivers. Cc: Joern Engel Cc: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/srpt/ib_srpt.c | 2 +- drivers/scsi/qla2xxx/tcm_qla2xxx.c | 2 +- drivers/target/target_core_transport.c | 28 +++++--------------------- include/target/target_core_fabric.h | 2 +- 4 files changed, 8 insertions(+), 26 deletions(-) diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index b08ca7a9f76b..564024e0123a 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -2328,7 +2328,7 @@ static void srpt_release_channel_work(struct work_struct *w) se_sess = ch->sess; BUG_ON(!se_sess); - target_wait_for_sess_cmds(se_sess, 0); + target_wait_for_sess_cmds(se_sess); transport_deregister_session_configfs(se_sess); transport_deregister_session(se_sess); diff --git a/drivers/scsi/qla2xxx/tcm_qla2xxx.c b/drivers/scsi/qla2xxx/tcm_qla2xxx.c index d182c96e17ea..7a3870f385f6 100644 --- a/drivers/scsi/qla2xxx/tcm_qla2xxx.c +++ b/drivers/scsi/qla2xxx/tcm_qla2xxx.c @@ -1370,7 +1370,7 @@ static void tcm_qla2xxx_free_session(struct qla_tgt_sess *sess) dump_stack(); return; } - target_wait_for_sess_cmds(se_sess, 0); + target_wait_for_sess_cmds(se_sess); transport_deregister_session_configfs(sess->se_sess); transport_deregister_session(sess->se_sess); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 4a793362309d..311c11349aab 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2263,14 +2263,10 @@ EXPORT_SYMBOL(target_sess_cmd_list_set_waiting); /* target_wait_for_sess_cmds - Wait for outstanding descriptors * @se_sess: session to wait for active I/O - * @wait_for_tasks: Make extra transport_wait_for_tasks call */ -void target_wait_for_sess_cmds( - struct se_session *se_sess, - int wait_for_tasks) +void target_wait_for_sess_cmds(struct se_session *se_sess) { struct se_cmd *se_cmd, *tmp_cmd; - bool rc = false; list_for_each_entry_safe(se_cmd, tmp_cmd, &se_sess->sess_cmd_list, se_cmd_list) { @@ -2280,24 +2276,10 @@ void target_wait_for_sess_cmds( " %d\n", se_cmd, se_cmd->t_state, se_cmd->se_tfo->get_cmd_state(se_cmd)); - if (wait_for_tasks) { - pr_debug("Calling transport_wait_for_tasks se_cmd: %p t_state: %d," - " fabric state: %d\n", se_cmd, se_cmd->t_state, - se_cmd->se_tfo->get_cmd_state(se_cmd)); - - rc = transport_wait_for_tasks(se_cmd); - - pr_debug("After transport_wait_for_tasks se_cmd: %p t_state: %d," - " fabric state: %d\n", se_cmd, se_cmd->t_state, - se_cmd->se_tfo->get_cmd_state(se_cmd)); - } - - if (!rc) { - wait_for_completion(&se_cmd->cmd_wait_comp); - pr_debug("After cmd_wait_comp: se_cmd: %p t_state: %d" - " fabric state: %d\n", se_cmd, se_cmd->t_state, - se_cmd->se_tfo->get_cmd_state(se_cmd)); - } + wait_for_completion(&se_cmd->cmd_wait_comp); + pr_debug("After cmd_wait_comp: se_cmd: %p t_state: %d" + " fabric state: %d\n", se_cmd, se_cmd->t_state, + se_cmd->se_tfo->get_cmd_state(se_cmd)); se_cmd->se_tfo->release_cmd(se_cmd); } diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index ba3471b73c07..8a26f0d55fd1 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -123,7 +123,7 @@ int transport_send_check_condition_and_sense(struct se_cmd *, int target_get_sess_cmd(struct se_session *, struct se_cmd *, bool); int target_put_sess_cmd(struct se_session *, struct se_cmd *); void target_sess_cmd_list_set_waiting(struct se_session *); -void target_wait_for_sess_cmds(struct se_session *, int); +void target_wait_for_sess_cmds(struct se_session *); int core_alua_check_nonop_delay(struct se_cmd *); From 7c055881de33b5d8ebb6d12150eaf338a0546199 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sun, 12 May 2013 23:21:24 +0200 Subject: [PATCH 024/429] NFC: Remove commented out LLCP related Makefile line The Kconfig symbol NFC_LLCP was removed in commit 30cc458765 ("NFC: Move LLCP code to the NFC top level diirectory"). But the reference to its macro in this Makefile was only commented out. Remove it now. Signed-off-by: Paul Bolle Signed-off-by: Samuel Ortiz --- net/nfc/Makefile | 1 - 1 file changed, 1 deletion(-) diff --git a/net/nfc/Makefile b/net/nfc/Makefile index fb799deaed4f..a76f4533cb6c 100644 --- a/net/nfc/Makefile +++ b/net/nfc/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_NFC) += nfc.o obj-$(CONFIG_NFC_NCI) += nci/ obj-$(CONFIG_NFC_HCI) += hci/ -#obj-$(CONFIG_NFC_LLCP) += llcp/ nfc-objs := core.o netlink.o af_nfc.o rawsock.o llcp_core.o llcp_commands.o \ llcp_sock.o From d999e4db0ac409c582cb15e6b120241ed9105064 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 30 Apr 2013 23:22:34 +0200 Subject: [PATCH 025/429] NFC: mei_phy depends on INTEL_MEI INTEL_MEI_BUS_NFC never made it upstream, so make it depend on INTEL_MEI. Signed-off-by: Samuel Ortiz --- drivers/nfc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig index 4775d4e61b88..74a852e4e41f 100644 --- a/drivers/nfc/Kconfig +++ b/drivers/nfc/Kconfig @@ -28,7 +28,7 @@ config NFC_WILINK config NFC_MEI_PHY tristate "MEI bus NFC device support" - depends on INTEL_MEI_BUS_NFC && NFC_HCI + depends on INTEL_MEI && NFC_HCI help This adds support to use an mei bus nfc device. Select this if you will use an HCI NFC driver for an NFC chip connected behind an From 73f3adb9b91efac04e4e7f8379a85400fc57121e Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 30 Apr 2013 23:48:50 +0200 Subject: [PATCH 026/429] NFC: mei_phy: Register event callback when enabling the device The callback registration starts a waiting read, so it needs to be fired everytime the device is enabled. Otherwise following writes will never get an answer back. Signed-off-by: Samuel Ortiz --- drivers/nfc/mei_phy.c | 9 +++++++++ drivers/nfc/microread/mei.c | 18 +++++------------- drivers/nfc/pn544/mei.c | 18 +++++------------- 3 files changed, 19 insertions(+), 26 deletions(-) diff --git a/drivers/nfc/mei_phy.c b/drivers/nfc/mei_phy.c index b8f8abc422f0..1201bdbfb791 100644 --- a/drivers/nfc/mei_phy.c +++ b/drivers/nfc/mei_phy.c @@ -64,6 +64,15 @@ int nfc_mei_phy_enable(void *phy_id) return r; } + r = mei_cl_register_event_cb(phy->device, nfc_mei_event_cb, phy); + if (r) { + pr_err("MEY_PHY: Event cb registration failed\n"); + mei_cl_disable_device(phy->device); + phy->powered = 0; + + return r; + } + phy->powered = 1; return 0; diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c index 1ad044dce7b6..51d44fb18be9 100644 --- a/drivers/nfc/microread/mei.c +++ b/drivers/nfc/microread/mei.c @@ -43,24 +43,16 @@ static int microread_mei_probe(struct mei_cl_device *device, return -ENOMEM; } - r = mei_cl_register_event_cb(device, nfc_mei_event_cb, phy); - if (r) { - pr_err(MICROREAD_DRIVER_NAME ": event cb registration failed\n"); - goto err_out; - } - r = microread_probe(phy, &mei_phy_ops, LLC_NOP_NAME, MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD, &phy->hdev); - if (r < 0) - goto err_out; + if (r < 0) { + nfc_mei_phy_free(phy); + + return r; + } return 0; - -err_out: - nfc_mei_phy_free(phy); - - return r; } static int microread_mei_remove(struct mei_cl_device *device) diff --git a/drivers/nfc/pn544/mei.c b/drivers/nfc/pn544/mei.c index 1eb48848a35a..50cef3a574b5 100644 --- a/drivers/nfc/pn544/mei.c +++ b/drivers/nfc/pn544/mei.c @@ -43,24 +43,16 @@ static int pn544_mei_probe(struct mei_cl_device *device, return -ENOMEM; } - r = mei_cl_register_event_cb(device, nfc_mei_event_cb, phy); - if (r) { - pr_err(PN544_DRIVER_NAME ": event cb registration failed\n"); - goto err_out; - } - r = pn544_hci_probe(phy, &mei_phy_ops, LLC_NOP_NAME, MEI_NFC_HEADER_SIZE, 0, MEI_NFC_MAX_HCI_PAYLOAD, &phy->hdev); - if (r < 0) - goto err_out; + if (r < 0) { + nfc_mei_phy_free(phy); + + return r; + } return 0; - -err_out: - nfc_mei_phy_free(phy); - - return r; } static int pn544_mei_remove(struct mei_cl_device *device) From e3a6b14ceda0207c3405c6266e5177a85c0db044 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 30 Apr 2013 23:50:29 +0200 Subject: [PATCH 027/429] NFC: mei: Do not disable MEI devices from their remove routine Enabling and disabling device is exclusively handled by the mei_phy_ops. Signed-off-by: Samuel Ortiz --- drivers/nfc/microread/mei.c | 2 -- drivers/nfc/pn544/mei.c | 2 -- 2 files changed, 4 deletions(-) diff --git a/drivers/nfc/microread/mei.c b/drivers/nfc/microread/mei.c index 51d44fb18be9..cdf1bc53b257 100644 --- a/drivers/nfc/microread/mei.c +++ b/drivers/nfc/microread/mei.c @@ -63,8 +63,6 @@ static int microread_mei_remove(struct mei_cl_device *device) microread_remove(phy->hdev); - nfc_mei_phy_disable(phy); - nfc_mei_phy_free(phy); return 0; diff --git a/drivers/nfc/pn544/mei.c b/drivers/nfc/pn544/mei.c index 50cef3a574b5..b5d3d18179eb 100644 --- a/drivers/nfc/pn544/mei.c +++ b/drivers/nfc/pn544/mei.c @@ -63,8 +63,6 @@ static int pn544_mei_remove(struct mei_cl_device *device) pn544_hci_remove(phy->hdev); - nfc_mei_phy_disable(phy); - nfc_mei_phy_free(phy); return 0; From 1c98b4871cca4b7ce07e19f92f934d47cf7210b0 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Mon, 13 May 2013 18:12:25 -0300 Subject: [PATCH 028/429] drm/i915: Adding more reserved PCI IDs for Haswell. At DDX commit Chris mentioned the tendency we have of finding out more PCI IDs only when users report. So Let's add all new reserved Haswell IDs. This patch also fix GT3 names. I'no not sending in separated patche because names are only in few comments and not in variable names. v2: Fix some mobile ids (by Paulo) References: http://bugs.freedesktop.org/show_bug.cgi?id=63701 Cc: Chris Wilson Cc: Paulo Zanoni Signed-off-by: Rodrigo Vivi Cc: stable@vger.kernel.org Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.c | 46 +++++++++++++++++++++++++-------- 1 file changed, 35 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 9ebe895c17d6..a2e4953b8e8d 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -364,40 +364,64 @@ static const struct pci_device_id pciidlist[] = { /* aka */ INTEL_VGA_DEVICE(0x016a, &intel_ivybridge_d_info), /* GT2 server */ INTEL_VGA_DEVICE(0x0402, &intel_haswell_d_info), /* GT1 desktop */ INTEL_VGA_DEVICE(0x0412, &intel_haswell_d_info), /* GT2 desktop */ - INTEL_VGA_DEVICE(0x0422, &intel_haswell_d_info), /* GT2 desktop */ + INTEL_VGA_DEVICE(0x0422, &intel_haswell_d_info), /* GT3 desktop */ INTEL_VGA_DEVICE(0x040a, &intel_haswell_d_info), /* GT1 server */ INTEL_VGA_DEVICE(0x041a, &intel_haswell_d_info), /* GT2 server */ - INTEL_VGA_DEVICE(0x042a, &intel_haswell_d_info), /* GT2 server */ + INTEL_VGA_DEVICE(0x042a, &intel_haswell_d_info), /* GT3 server */ INTEL_VGA_DEVICE(0x0406, &intel_haswell_m_info), /* GT1 mobile */ INTEL_VGA_DEVICE(0x0416, &intel_haswell_m_info), /* GT2 mobile */ INTEL_VGA_DEVICE(0x0426, &intel_haswell_m_info), /* GT2 mobile */ + INTEL_VGA_DEVICE(0x040B, &intel_haswell_d_info), /* GT1 reserved */ + INTEL_VGA_DEVICE(0x041B, &intel_haswell_d_info), /* GT2 reserved */ + INTEL_VGA_DEVICE(0x042B, &intel_haswell_d_info), /* GT3 reserved */ + INTEL_VGA_DEVICE(0x040E, &intel_haswell_d_info), /* GT1 reserved */ + INTEL_VGA_DEVICE(0x041E, &intel_haswell_d_info), /* GT2 reserved */ + INTEL_VGA_DEVICE(0x042E, &intel_haswell_d_info), /* GT3 reserved */ INTEL_VGA_DEVICE(0x0C02, &intel_haswell_d_info), /* SDV GT1 desktop */ INTEL_VGA_DEVICE(0x0C12, &intel_haswell_d_info), /* SDV GT2 desktop */ - INTEL_VGA_DEVICE(0x0C22, &intel_haswell_d_info), /* SDV GT2 desktop */ + INTEL_VGA_DEVICE(0x0C22, &intel_haswell_d_info), /* SDV GT3 desktop */ INTEL_VGA_DEVICE(0x0C0A, &intel_haswell_d_info), /* SDV GT1 server */ INTEL_VGA_DEVICE(0x0C1A, &intel_haswell_d_info), /* SDV GT2 server */ - INTEL_VGA_DEVICE(0x0C2A, &intel_haswell_d_info), /* SDV GT2 server */ + INTEL_VGA_DEVICE(0x0C2A, &intel_haswell_d_info), /* SDV GT3 server */ INTEL_VGA_DEVICE(0x0C06, &intel_haswell_m_info), /* SDV GT1 mobile */ INTEL_VGA_DEVICE(0x0C16, &intel_haswell_m_info), /* SDV GT2 mobile */ - INTEL_VGA_DEVICE(0x0C26, &intel_haswell_m_info), /* SDV GT2 mobile */ + INTEL_VGA_DEVICE(0x0C26, &intel_haswell_m_info), /* SDV GT3 mobile */ + INTEL_VGA_DEVICE(0x0C0B, &intel_haswell_d_info), /* SDV GT1 reserved */ + INTEL_VGA_DEVICE(0x0C1B, &intel_haswell_d_info), /* SDV GT2 reserved */ + INTEL_VGA_DEVICE(0x0C2B, &intel_haswell_d_info), /* SDV GT3 reserved */ + INTEL_VGA_DEVICE(0x0C0E, &intel_haswell_d_info), /* SDV GT1 reserved */ + INTEL_VGA_DEVICE(0x0C1E, &intel_haswell_d_info), /* SDV GT2 reserved */ + INTEL_VGA_DEVICE(0x0C2E, &intel_haswell_d_info), /* SDV GT3 reserved */ INTEL_VGA_DEVICE(0x0A02, &intel_haswell_d_info), /* ULT GT1 desktop */ INTEL_VGA_DEVICE(0x0A12, &intel_haswell_d_info), /* ULT GT2 desktop */ - INTEL_VGA_DEVICE(0x0A22, &intel_haswell_d_info), /* ULT GT2 desktop */ + INTEL_VGA_DEVICE(0x0A22, &intel_haswell_d_info), /* ULT GT3 desktop */ INTEL_VGA_DEVICE(0x0A0A, &intel_haswell_d_info), /* ULT GT1 server */ INTEL_VGA_DEVICE(0x0A1A, &intel_haswell_d_info), /* ULT GT2 server */ - INTEL_VGA_DEVICE(0x0A2A, &intel_haswell_d_info), /* ULT GT2 server */ + INTEL_VGA_DEVICE(0x0A2A, &intel_haswell_d_info), /* ULT GT3 server */ INTEL_VGA_DEVICE(0x0A06, &intel_haswell_m_info), /* ULT GT1 mobile */ INTEL_VGA_DEVICE(0x0A16, &intel_haswell_m_info), /* ULT GT2 mobile */ - INTEL_VGA_DEVICE(0x0A26, &intel_haswell_m_info), /* ULT GT2 mobile */ + INTEL_VGA_DEVICE(0x0A26, &intel_haswell_m_info), /* ULT GT3 mobile */ + INTEL_VGA_DEVICE(0x0A0B, &intel_haswell_d_info), /* ULT GT1 reserved */ + INTEL_VGA_DEVICE(0x0A1B, &intel_haswell_d_info), /* ULT GT2 reserved */ + INTEL_VGA_DEVICE(0x0A2B, &intel_haswell_d_info), /* ULT GT3 reserved */ + INTEL_VGA_DEVICE(0x0A0E, &intel_haswell_m_info), /* ULT GT1 reserved */ + INTEL_VGA_DEVICE(0x0A1E, &intel_haswell_m_info), /* ULT GT2 reserved */ + INTEL_VGA_DEVICE(0x0A2E, &intel_haswell_m_info), /* ULT GT3 reserved */ INTEL_VGA_DEVICE(0x0D02, &intel_haswell_d_info), /* CRW GT1 desktop */ INTEL_VGA_DEVICE(0x0D12, &intel_haswell_d_info), /* CRW GT2 desktop */ - INTEL_VGA_DEVICE(0x0D22, &intel_haswell_d_info), /* CRW GT2 desktop */ + INTEL_VGA_DEVICE(0x0D22, &intel_haswell_d_info), /* CRW GT3 desktop */ INTEL_VGA_DEVICE(0x0D0A, &intel_haswell_d_info), /* CRW GT1 server */ INTEL_VGA_DEVICE(0x0D1A, &intel_haswell_d_info), /* CRW GT2 server */ - INTEL_VGA_DEVICE(0x0D2A, &intel_haswell_d_info), /* CRW GT2 server */ + INTEL_VGA_DEVICE(0x0D2A, &intel_haswell_d_info), /* CRW GT3 server */ INTEL_VGA_DEVICE(0x0D06, &intel_haswell_m_info), /* CRW GT1 mobile */ INTEL_VGA_DEVICE(0x0D16, &intel_haswell_m_info), /* CRW GT2 mobile */ - INTEL_VGA_DEVICE(0x0D26, &intel_haswell_m_info), /* CRW GT2 mobile */ + INTEL_VGA_DEVICE(0x0D26, &intel_haswell_m_info), /* CRW GT3 mobile */ + INTEL_VGA_DEVICE(0x0D0B, &intel_haswell_d_info), /* CRW GT1 reserved */ + INTEL_VGA_DEVICE(0x0D1B, &intel_haswell_d_info), /* CRW GT2 reserved */ + INTEL_VGA_DEVICE(0x0D2B, &intel_haswell_d_info), /* CRW GT3 reserved */ + INTEL_VGA_DEVICE(0x0D0E, &intel_haswell_d_info), /* CRW GT1 reserved */ + INTEL_VGA_DEVICE(0x0D1E, &intel_haswell_d_info), /* CRW GT2 reserved */ + INTEL_VGA_DEVICE(0x0D2E, &intel_haswell_d_info), /* CRW GT3 reserved */ INTEL_VGA_DEVICE(0x0f30, &intel_valleyview_m_info), INTEL_VGA_DEVICE(0x0f31, &intel_valleyview_m_info), INTEL_VGA_DEVICE(0x0f32, &intel_valleyview_m_info), From 2d05eae1c92f93ace0fc6f282c55527d293297dd Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 3 May 2013 17:36:25 +0100 Subject: [PATCH 029/429] drm/i915: Propagate errors back from fb set-base Along the modesetting short cut where we skip trying to do a full modeset and instead simply update the framebuffer base registers, we failed to handle any errors reported. This regression has been introduced in commit 94352cf9a5328bb1a44288e6c2c1276695f8a356 Author: Daniel Vetter Date: Thu Jul 5 22:51:56 2012 +0200 drm/i915: push crtc->fb update into pipe_set_base Signed-off-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 25 ++++++++++--------------- 1 file changed, 10 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index efe829919755..300942a7d144 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8332,11 +8332,6 @@ static int intel_crtc_set_config(struct drm_mode_set *set) ret = intel_set_mode(set->crtc, set->mode, set->x, set->y, set->fb); - if (ret) { - DRM_ERROR("failed to set mode on [CRTC:%d], err = %d\n", - set->crtc->base.id, ret); - goto fail; - } } else if (config->fb_changed) { intel_crtc_wait_for_pending_flips(set->crtc); @@ -8344,18 +8339,18 @@ static int intel_crtc_set_config(struct drm_mode_set *set) set->x, set->y, set->fb); } - intel_set_config_free(config); - - return 0; - + if (ret) { + DRM_ERROR("failed to set mode on [CRTC:%d], err = %d\n", + set->crtc->base.id, ret); fail: - intel_set_config_restore_state(dev, config); + intel_set_config_restore_state(dev, config); - /* Try to restore the config */ - if (config->mode_changed && - intel_set_mode(save_set.crtc, save_set.mode, - save_set.x, save_set.y, save_set.fb)) - DRM_ERROR("failed to restore config after modeset failure\n"); + /* Try to restore the config */ + if (config->mode_changed && + intel_set_mode(save_set.crtc, save_set.mode, + save_set.x, save_set.y, save_set.fb)) + DRM_ERROR("failed to restore config after modeset failure\n"); + } out_config: intel_set_config_free(config); From ce0d10f887cabf9f16d1cbb60ef013021befbfdf Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 21 May 2013 15:04:07 +0100 Subject: [PATCH 030/429] regulator: core: Correct spelling mistake in comment Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- drivers/regulator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 6e5017841582..5e50b20f0f96 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2702,7 +2702,7 @@ EXPORT_SYMBOL_GPL(regulator_get_voltage); /** * regulator_set_current_limit - set regulator output current limit * @regulator: regulator source - * @min_uA: Minimuum supported current in uA + * @min_uA: Minimum supported current in uA * @max_uA: Maximum supported current in uA * * Sets current sink to the desired output current. This can be set during From 796718925159523919a589ecbd6d1811c22ef55f Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 16 May 2013 15:25:01 +0200 Subject: [PATCH 031/429] ASoC: davinci: fix sample rotation McASP serial audio engine needs different rotation values on TX and RX channels. Commit dde109fb462 ("ASoC: McASP: Fix data rotation for playback. Enables 24bit audio playback") changed the calculation to fix the playback format, but broke the capture stream by doing it for both TXFMT and RXFMT. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown Cc: stable@vger.kernel.org [3.9 only] --- sound/soc/davinci/davinci-mcasp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 56ecfc72f2e9..81490febac6d 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -631,7 +631,8 @@ static int davinci_config_channel_size(struct davinci_audio_dev *dev, int word_length) { u32 fmt; - u32 rotate = (word_length / 4) & 0x7; + u32 tx_rotate = (word_length / 4) & 0x7; + u32 rx_rotate = (32 - word_length) / 4; u32 mask = (1ULL << word_length) - 1; /* @@ -655,9 +656,9 @@ static int davinci_config_channel_size(struct davinci_audio_dev *dev, mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMT_REG, TXSSZ(fmt), TXSSZ(0x0F)); mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMT_REG, - TXROT(rotate), TXROT(7)); + TXROT(tx_rotate), TXROT(7)); mcasp_mod_bits(dev->base + DAVINCI_MCASP_RXFMT_REG, - RXROT(rotate), RXROT(7)); + RXROT(rx_rotate), RXROT(7)); mcasp_set_reg(dev->base + DAVINCI_MCASP_RXMASK_REG, mask); } From e4f2dfbb5e92be4e46c0625f4f8eb101110f756f Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Fri, 8 Mar 2013 15:03:53 +0100 Subject: [PATCH 032/429] m68k: implement futex.h to support userspace robust futexes and PI mutexes Linux/M68K currently doesn't support robust futexes or PI mutexes. The problem is that the futex code needs to perform certain ops (cmpxchg, set, add, or, andn, xor) atomically on user-space addresses, and M68K's lack of a futex.h causes those operations to be unsupported and disabled. This patch adds that support, but only for uniprocessor machines, which is adequate for M68K. For UP it's enough to disable preemption to ensure mutual exclusion (futexes don't need to care about other hardware agents), and the mandatory pagefault_disable() does just that. This patch is closely based on the one I co-wrote for UP ARM back in August 2008. The main change is that this patch uses the C get_user/put_user accessors instead of inline assembly code with exception table fixups. For non-MMU machines the new futex.h simply redirects to the generic futex.h, so there is no functional change for them. Tested on aranym with the glibc-2.17 test suite: no regressions, and a number of mutex/condvar test cases went from failing to succeeding (tst-mutexpi{5,5a,6,9}, tst-cond2[45], tst-robust[1-9], tst-robustpi[1-8]). Also tested with glibc-2.18 HEAD and a local glibc patch to enable PI mutexes: no regressions. Signed-off-by: Mikael Pettersson Acked-by: Andreas Schwab [geert: Added removal of ""generic-y += futex.h"] Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/Kbuild | 1 - arch/m68k/include/asm/futex.h | 94 +++++++++++++++++++++++++++++++++++ 2 files changed, 94 insertions(+), 1 deletion(-) create mode 100644 arch/m68k/include/asm/futex.h diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index c7933e41f10d..09d77a862da3 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -6,7 +6,6 @@ generic-y += device.h generic-y += emergency-restart.h generic-y += errno.h generic-y += exec.h -generic-y += futex.h generic-y += hw_irq.h generic-y += ioctl.h generic-y += ipcbuf.h diff --git a/arch/m68k/include/asm/futex.h b/arch/m68k/include/asm/futex.h new file mode 100644 index 000000000000..bc868af10c96 --- /dev/null +++ b/arch/m68k/include/asm/futex.h @@ -0,0 +1,94 @@ +#ifndef _ASM_M68K_FUTEX_H +#define _ASM_M68K_FUTEX_H + +#ifdef __KERNEL__ +#if !defined(CONFIG_MMU) +#include +#else /* CONFIG_MMU */ + +#include +#include +#include + +static inline int +futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, + u32 oldval, u32 newval) +{ + u32 val; + + if (unlikely(get_user(val, uaddr) != 0)) + return -EFAULT; + + if (val == oldval && unlikely(put_user(newval, uaddr) != 0)) + return -EFAULT; + + *uval = val; + + return 0; +} + +static inline int +futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval, ret; + u32 tmp; + + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + pagefault_disable(); /* implies preempt_disable() */ + + ret = -EFAULT; + if (unlikely(get_user(oldval, uaddr) != 0)) + goto out_pagefault_enable; + + ret = 0; + tmp = oldval; + + switch (op) { + case FUTEX_OP_SET: + tmp = oparg; + break; + case FUTEX_OP_ADD: + tmp += oparg; + break; + case FUTEX_OP_OR: + tmp |= oparg; + break; + case FUTEX_OP_ANDN: + tmp &= ~oparg; + break; + case FUTEX_OP_XOR: + tmp ^= oparg; + break; + default: + ret = -ENOSYS; + } + + if (ret == 0 && unlikely(put_user(tmp, uaddr) != 0)) + ret = -EFAULT; + +out_pagefault_enable: + pagefault_enable(); /* subsumes preempt_enable() */ + + if (ret == 0) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + return ret; +} + +#endif /* CONFIG_MMU */ +#endif /* __KERNEL__ */ +#endif /* _ASM_M68K_FUTEX_H */ From 95d38d144ab4520aea3f8fcfacc5fd62d3bf2697 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:41 +0000 Subject: [PATCH 033/429] drm/nouveau: use drm_send_vblank_event() helper Signed-off-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nouveau_display.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 7bf22d4a3d96..f17dc2ab03ec 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -638,17 +638,8 @@ nouveau_finish_page_flip(struct nouveau_channel *chan, } s = list_first_entry(&fctx->flip, struct nouveau_page_flip_state, head); - if (s->event) { - struct drm_pending_vblank_event *e = s->event; - struct timeval now; - - do_gettimeofday(&now); - e->event.sequence = 0; - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; - list_add_tail(&e->base.link, &e->base.file_priv->event_list); - wake_up_interruptible(&e->base.file_priv->event_wait); - } + if (s->event) + drm_send_vblank_event(dev, -1, s->event); list_del(&s->head); if (ps) From 26ae466732c181b7376610fd9241787698179b01 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:42 +0000 Subject: [PATCH 034/429] drm/radeon: use drm_send_vblank_event() helper Signed-off-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index e38fd559f1ab..eb18bb7af1cc 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -271,8 +271,6 @@ void radeon_crtc_handle_flip(struct radeon_device *rdev, int crtc_id) { struct radeon_crtc *radeon_crtc = rdev->mode_info.crtcs[crtc_id]; struct radeon_unpin_work *work; - struct drm_pending_vblank_event *e; - struct timeval now; unsigned long flags; u32 update_pending; int vpos, hpos; @@ -328,14 +326,9 @@ void radeon_crtc_handle_flip(struct radeon_device *rdev, int crtc_id) radeon_crtc->unpin_work = NULL; /* wakeup userspace */ - if (work->event) { - e = work->event; - e->event.sequence = drm_vblank_count_and_time(rdev->ddev, crtc_id, &now); - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; - list_add_tail(&e->base.link, &e->base.file_priv->event_list); - wake_up_interruptible(&e->base.file_priv->event_wait); - } + if (work->event) + drm_send_vblank_event(rdev->ddev, crtc_id, work->event); + spin_unlock_irqrestore(&rdev->ddev->event_lock, flags); drm_vblank_put(rdev->ddev, radeon_crtc->crtc_id); From f7e96d7e28817a66db36e89f25b77bda7dba6da0 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:45 +0000 Subject: [PATCH 035/429] drm/shmob: use drm_send_vblank_event() helper Signed-off-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/gpu/drm/shmobile/shmob_drm_crtc.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c index 7dff49ed66e7..99e2034e49cc 100644 --- a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c +++ b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c @@ -451,27 +451,16 @@ void shmob_drm_crtc_finish_page_flip(struct shmob_drm_crtc *scrtc) { struct drm_pending_vblank_event *event; struct drm_device *dev = scrtc->crtc.dev; - struct timeval vblanktime; unsigned long flags; spin_lock_irqsave(&dev->event_lock, flags); event = scrtc->event; scrtc->event = NULL; + if (event) { + drm_send_vblank_event(dev, 0, event); + drm_vblank_put(dev, 0); + } spin_unlock_irqrestore(&dev->event_lock, flags); - - if (event == NULL) - return; - - event->event.sequence = drm_vblank_count_and_time(dev, 0, &vblanktime); - event->event.tv_sec = vblanktime.tv_sec; - event->event.tv_usec = vblanktime.tv_usec; - - spin_lock_irqsave(&dev->event_lock, flags); - list_add_tail(&event->base.link, &event->base.file_priv->event_list); - wake_up_interruptible(&event->base.file_priv->event_wait); - spin_unlock_irqrestore(&dev->event_lock, flags); - - drm_vblank_put(dev, 0); } static int shmob_drm_crtc_page_flip(struct drm_crtc *crtc, From 0eca56f9467038ee0b798637f03581aaa1186fac Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 19:50:46 +0000 Subject: [PATCH 036/429] drm/imx: use drm_send_vblank_event() helper Also, slightly changes the behavior to always put the vblank irq, even if userspace did not request a vblank event. As far as I can tell, the previous code would leak a vblank irq refcnt if userspace requested a pageflip without event. Signed-off-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/staging/imx-drm/ipuv3-crtc.c | 21 ++------------------- 1 file changed, 2 insertions(+), 19 deletions(-) diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c index b028b0d1317b..1cd74f5e4c76 100644 --- a/drivers/staging/imx-drm/ipuv3-crtc.c +++ b/drivers/staging/imx-drm/ipuv3-crtc.c @@ -311,31 +311,14 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc, static void ipu_crtc_handle_pageflip(struct ipu_crtc *ipu_crtc) { - struct drm_pending_vblank_event *e; - struct timeval now; unsigned long flags; struct drm_device *drm = ipu_crtc->base.dev; spin_lock_irqsave(&drm->event_lock, flags); - - e = ipu_crtc->page_flip_event; - if (!e) { - spin_unlock_irqrestore(&drm->event_lock, flags); - return; - } - - do_gettimeofday(&now); - e->event.sequence = 0; - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; + if (ipu_crtc->page_flip_event) + drm_send_vblank_event(drm, -1, ipu_crtc->page_flip_event); ipu_crtc->page_flip_event = NULL; - imx_drm_crtc_vblank_put(ipu_crtc->imx_crtc); - - list_add_tail(&e->base.link, &e->base.file_priv->event_list); - - wake_up_interruptible(&e->base.file_priv->event_wait); - spin_unlock_irqrestore(&drm->event_lock, flags); } From e771451c0a831d96a7c14b0ca8a8ec671d98567b Mon Sep 17 00:00:00 2001 From: Vincent Pelletier Date: Sat, 18 May 2013 18:44:04 +0200 Subject: [PATCH 037/429] libata: make ata_exec_internal_sg honor DMADIR MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit libata honors DMADIR for regular commands, but not for internal commands used (among other) during device initialisation. This makes SATA-host-to-PATA-device bridges based on Silicon Image SiL3611 (such as "Abit Serillel 2") end up disabled when used with an ATAPI device after a few tries. Log output of the bridge being hot-plugged with an ATAPI drive: [ 9631.212901] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen [ 9631.212913] ata1: irq_stat 0x00000040, connection status changed [ 9631.212923] ata1: SError: { CommWake 10B8B DevExch } [ 9631.212939] ata1: hard resetting link [ 9632.104962] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9632.106393] ata1.00: ATAPI: PIONEER DVD-RW DVR-115, 1.06, max UDMA/33 [ 9632.106407] ata1.00: applying bridge limits [ 9632.108151] ata1.00: configured for UDMA/33 [ 9637.105303] ata1.00: qc timeout (cmd 0xa0) [ 9637.105324] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9637.105335] ata1: hard resetting link [ 9638.044599] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9638.047878] ata1.00: configured for UDMA/33 [ 9643.044933] ata1.00: qc timeout (cmd 0xa0) [ 9643.044953] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9643.044963] ata1: limiting SATA link speed to 1.5 Gbps [ 9643.044971] ata1.00: limiting speed to UDMA/33:PIO3 [ 9643.044979] ata1: hard resetting link [ 9643.984225] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 9643.987471] ata1.00: configured for UDMA/33 [ 9648.984591] ata1.00: qc timeout (cmd 0xa0) [ 9648.984612] ata1.00: failed to clear UNIT ATTENTION (err_mask=0x5) [ 9648.984619] ata1.00: disabled [ 9649.000593] ata1: hard resetting link [ 9649.939902] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 9649.955864] ata1: EH complete With this patch, the drive enumerates correctly when libata is loaded with atapi_dmadir=1: [ 9891.810863] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen [ 9891.810874] ata1: irq_stat 0x00000040, connection status changed [ 9891.810884] ata1: SError: { CommWake 10B8B DevExch } [ 9891.810900] ata1: hard resetting link [ 9892.762105] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9892.763544] ata1.00: ATAPI: PIONEER DVD-RW DVR-115, 1.06, max UDMA/33, DMADIR [ 9892.763558] ata1.00: applying bridge limits [ 9892.765393] ata1.00: configured for UDMA/33 [ 9892.786063] ata1: EH complete [ 9892.792062] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-115 1.06 PQ: 0 ANSI: 5 [ 9892.798455] sr2: scsi3-mmc drive: 12x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 9892.798837] sr 0:0:0:0: Attached scsi CD-ROM sr2 [ 9892.799109] sr 0:0:0:0: Attached scsi generic sg6 type 5 Based on a patch by Csaba Halász on linux-ide: http://marc.info/?l=linux-ide&m=136121147832295&w=2 tj: minor formatting changes. Signed-off-by: Vincent Pelletier Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/libata-core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index d35524c33905..f2184276539d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1602,6 +1602,12 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, qc->tf = *tf; if (cdb) memcpy(qc->cdb, cdb, ATAPI_CDB_LEN); + + /* some SATA bridges need us to indicate data xfer direction */ + if (tf->protocol == ATAPI_PROT_DMA && (dev->flags & ATA_DFLAG_DMADIR) && + dma_dir == DMA_FROM_DEVICE) + qc->tf.feature |= ATAPI_DMADIR; + qc->flags |= ATA_QCFLAG_RESULT_TF; qc->dma_dir = dma_dir; if (dma_dir != DMA_NONE) { From df7e131f6359f20ed8f0a37db039c4f6420a18c2 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 21 May 2013 23:07:54 +0400 Subject: [PATCH 038/429] sata_rcar: clear STOP bit in bmdma_start() method Iff bmdma_setup() has to stop a DMA transfer before starting a new one, then the STOP bit in the ATAPI_CONTROL1 register will remain set (it's only cleared when setting the START bit to 1) and then bmdma_start() method will set both START and STOP bits simultaneously which should abort the transfer being just started. Avoid that by explicitly clearing the STOP bit in bmdma_start() method (in this case it will be ignored on write). Signed-off-by: Sergei Shtylyov Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/sata_rcar.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index 4799868bd733..a8e091aafdde 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -549,6 +549,7 @@ static void sata_rcar_bmdma_start(struct ata_queued_cmd *qc) /* start host DMA transaction */ dmactl = ioread32(priv->base + ATAPI_CONTROL1_REG); + dmactl &= ~ATAPI_CONTROL1_STOP; dmactl |= ATAPI_CONTROL1_START; iowrite32(dmactl, priv->base + ATAPI_CONTROL1_REG); } From 41eab402b43f1ca3e1279595bc138f5ac2a914f7 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 29 Apr 2013 12:27:05 +0530 Subject: [PATCH 039/429] drm/exynos: exynos_drm_fbdev: Fix incorrect usage of IS_ERR_OR_NULL exynos_drm_framebuffer_init() does not return NULL. Use IS_ERR instead. Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 68f0045f86b8..8f007aaeffc3 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -182,7 +182,7 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper, helper->fb = exynos_drm_framebuffer_init(dev, &mode_cmd, &exynos_gem_obj->base); - if (IS_ERR_OR_NULL(helper->fb)) { + if (IS_ERR(helper->fb)) { DRM_ERROR("failed to create drm framebuffer.\n"); ret = PTR_ERR(helper->fb); goto err_destroy_gem; From f02504587ed5669cc721a1f2351322e6badfe67f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 29 Apr 2013 12:27:06 +0530 Subject: [PATCH 040/429] drm/exynos: exynos_drm_ipp: Fix incorrect usage of IS_ERR_OR_NULL None of these functions actually return a NULL pointer. Hence use IS_ERR() instead. Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_ipp.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_ipp.c b/drivers/gpu/drm/exynos/exynos_drm_ipp.c index 29d2ad314490..5c4764af7cb9 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_ipp.c +++ b/drivers/gpu/drm/exynos/exynos_drm_ipp.c @@ -222,7 +222,7 @@ static struct exynos_drm_ippdrv *ipp_find_driver(struct ipp_context *ctx, /* find ipp driver using idr */ ippdrv = ipp_find_obj(&ctx->ipp_idr, &ctx->ipp_lock, ipp_id); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("not found ipp%d driver.\n", ipp_id); return ippdrv; } @@ -388,7 +388,7 @@ static int ipp_find_and_set_property(struct drm_exynos_ipp_property *property) DRM_DEBUG_KMS("%s:prop_id[%d]\n", __func__, prop_id); ippdrv = ipp_find_drv_by_handle(prop_id); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("failed to get ipp driver.\n"); return -EINVAL; } @@ -492,7 +492,7 @@ int exynos_drm_ipp_set_property(struct drm_device *drm_dev, void *data, /* find ipp driver using ipp id */ ippdrv = ipp_find_driver(ctx, property); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("failed to get ipp driver.\n"); return -EINVAL; } @@ -521,19 +521,19 @@ int exynos_drm_ipp_set_property(struct drm_device *drm_dev, void *data, c_node->state = IPP_STATE_IDLE; c_node->start_work = ipp_create_cmd_work(); - if (IS_ERR_OR_NULL(c_node->start_work)) { + if (IS_ERR(c_node->start_work)) { DRM_ERROR("failed to create start work.\n"); goto err_clear; } c_node->stop_work = ipp_create_cmd_work(); - if (IS_ERR_OR_NULL(c_node->stop_work)) { + if (IS_ERR(c_node->stop_work)) { DRM_ERROR("failed to create stop work.\n"); goto err_free_start; } c_node->event_work = ipp_create_event_work(); - if (IS_ERR_OR_NULL(c_node->event_work)) { + if (IS_ERR(c_node->event_work)) { DRM_ERROR("failed to create event work.\n"); goto err_free_stop; } @@ -915,7 +915,7 @@ static int ipp_queue_buf_with_run(struct device *dev, DRM_DEBUG_KMS("%s\n", __func__); ippdrv = ipp_find_drv_by_handle(qbuf->prop_id); - if (IS_ERR_OR_NULL(ippdrv)) { + if (IS_ERR(ippdrv)) { DRM_ERROR("failed to get ipp driver.\n"); return -EFAULT; } From 4c1d8def9d5bbd642782893ccd849963f1811ae6 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 20 May 2013 19:32:06 +0200 Subject: [PATCH 041/429] drm/exynos: exynos_hdmi: Pass correct pointer to free_irq() free_irq() expects the same pointer that was passed to request_threaded_irq(), otherwise the IRQ is not freed. The issue was found using the following coccinelle script: @r1@ type T; T devid; @@ request_threaded_irq(..., devid) @r2@ type r1.T; T devid; position p; @@ free_irq@p(..., devid) @@ position p != r2.p; @@ *free_irq@p(...) Signed-off-by: Lars-Peter Clausen Acked-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_hdmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index bbfc3840080c..7e99853f1e18 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -2082,7 +2082,7 @@ static int hdmi_remove(struct platform_device *pdev) pm_runtime_disable(dev); - free_irq(hdata->irq, hdata); + free_irq(hdata->irq, ctx); /* hdmiphy i2c driver */ From 94d019b87859bb984bd6c15db330d404eab3acaa Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 8 Oct 2012 14:50:44 -0500 Subject: [PATCH 042/429] drm/exynos: page flip fixes The event wouldn't be on any list at this point, so nothing to delete it from. Signed-off-by: Rob Clark Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_crtc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index e8894bc9e6d5..02b36080d00b 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -217,7 +217,6 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc, ret = drm_vblank_get(dev, exynos_crtc->pipe); if (ret) { DRM_DEBUG("failed to acquire vblank counter\n"); - list_del(&event->base.link); goto out; } From e3de42b68478a8c95dd27520e9adead2af9477a5 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 3 May 2013 19:44:07 +0200 Subject: [PATCH 043/429] drm/i915: force full modeset if the connector is in DPMS OFF mode Currently the driver's assumed behavior for a modeset with an attached FB is that the corresponding connector will be switched to DPMS ON mode if it happened to be in DPMS OFF (or another power save mode). This wasn't enforced though if only the FB changed, everything else (format, connector etc.) remaining the same. In this case we only set the new FB base and left the connector in the old power save mode. Fix this by forcing a full modeset whenever there is an attached FB and any affected connector is in a power save mode. V_2: Run the test for encoders in power save mode outside the the test for fb change: user space may have just disabled the encoders but left everything else in place. Make sure the connector list is not empty before running this test. Signed-off-by: Imre Deak Signed-off-by: Egbert Eich Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61642 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59834 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59339 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64178 Acked-by: Jesse Barnes [danvet: Apply Jani's s/connector_off/is_crtc_connector_off bikeshed.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 300942a7d144..ad1117bebd7e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8140,6 +8140,21 @@ static void intel_set_config_restore_state(struct drm_device *dev, } } +static bool +is_crtc_connector_off(struct drm_crtc *crtc, struct drm_connector *connectors, + int num_connectors) +{ + int i; + + for (i = 0; i < num_connectors; i++) + if (connectors[i].encoder && + connectors[i].encoder->crtc == crtc && + connectors[i].dpms != DRM_MODE_DPMS_ON) + return true; + + return false; +} + static void intel_set_config_compute_mode_changes(struct drm_mode_set *set, struct intel_set_config *config) @@ -8147,7 +8162,11 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set, /* We should be able to check here if the fb has the same properties * and then just flip_or_move it */ - if (set->crtc->fb != set->fb) { + if (set->connectors != NULL && + is_crtc_connector_off(set->crtc, *set->connectors, + set->num_connectors)) { + config->mode_changed = true; + } else if (set->crtc->fb != set->fb) { /* If we have no fb then treat it as a full mode set */ if (set->crtc->fb == NULL) { DRM_DEBUG_KMS("crtc has no fb, full mode set\n"); @@ -8157,8 +8176,9 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set, } else if (set->fb->pixel_format != set->crtc->fb->pixel_format) { config->mode_changed = true; - } else + } else { config->fb_changed = true; + } } if (set->fb && (set->x != set->crtc->x || set->y != set->crtc->y)) From abd9a0c36028771a8f397f38bf79bfcf404f957f Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Fri, 17 May 2013 16:37:59 +0200 Subject: [PATCH 044/429] s390/dma: do not call debug_dma after free In dma_free_coherent call debug_dma_free_coherent before deallocating the memory to avoid a possible use after free. Reviewed-by: Gerald Schaefer Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/dma-mapping.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/include/asm/dma-mapping.h b/arch/s390/include/asm/dma-mapping.h index 9411db653bac..886ac7d4937a 100644 --- a/arch/s390/include/asm/dma-mapping.h +++ b/arch/s390/include/asm/dma-mapping.h @@ -71,8 +71,8 @@ static inline void dma_free_coherent(struct device *dev, size_t size, { struct dma_map_ops *dma_ops = get_dma_ops(dev); - dma_ops->free(dev, size, cpu_addr, dma_handle, NULL); debug_dma_free_coherent(dev, size, cpu_addr, dma_handle); + dma_ops->free(dev, size, cpu_addr, dma_handle, NULL); } #endif /* _ASM_S390_DMA_MAPPING_H */ From 576ebd74928fd60ae112b33c42b89602015fadbd Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Tue, 21 May 2013 16:08:22 +0200 Subject: [PATCH 045/429] kernel: Fix s390 absolute memory access for /dev/mem On s390 the prefix page and absolute zero pages are not correctly returned when reading /dev/mem. The reason is that the s390 asm/io.h file includes the asm-generic/io.h file which then defines xlate_dev_mem_ptr() and therefore overwrites the s390 specific version that does the correct swap operation for prefix and absolute zero pages. The problem is a regression that was introduced with git commit cd248341 (s390/pci: base support). To fix the problem add "#ifndef xlate_dev_mem_ptr" in asm-generic/io.h and "#define xlate_dev_mem_ptr" in asm/io.h. This ensures that the s390 version is used. For completeness also add the "#ifndef" construct for xlate_dev_kmem_ptr(). Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/io.h | 1 + include/asm-generic/io.h | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/arch/s390/include/asm/io.h b/arch/s390/include/asm/io.h index 379d96e2105e..fd9be010f9b2 100644 --- a/arch/s390/include/asm/io.h +++ b/arch/s390/include/asm/io.h @@ -36,6 +36,7 @@ static inline void * phys_to_virt(unsigned long address) } void *xlate_dev_mem_ptr(unsigned long phys); +#define xlate_dev_mem_ptr xlate_dev_mem_ptr void unxlate_dev_mem_ptr(unsigned long phys, void *addr); /* diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h index ac9da00e9f2c..d5afe96adba6 100644 --- a/include/asm-generic/io.h +++ b/include/asm-generic/io.h @@ -343,8 +343,12 @@ extern void ioport_unmap(void __iomem *p); #endif /* CONFIG_GENERIC_IOMAP */ #endif /* CONFIG_HAS_IOPORT */ +#ifndef xlate_dev_kmem_ptr #define xlate_dev_kmem_ptr(p) p +#endif +#ifndef xlate_dev_mem_ptr #define xlate_dev_mem_ptr(p) __va(p) +#endif #ifdef CONFIG_VIRT_TO_BUS #ifndef virt_to_bus From df97729f1bcb5055ba414f08b48364d46c6baef0 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:17 +0300 Subject: [PATCH 046/429] drm/i915: add msecs_to_jiffies_timeout to guarantee minimum duration We need this to avoid premature timeouts whenever scheduling a timeout based on the current jiffies value. For an explanation see [1]. The following patches will take the helper into use. Once the more generic solution proposed in the thread at [1] is accepted this patch can be reverted while keeping the follow-up patches. [1] http://marc.info/?l=linux-kernel&m=136854294730957&w=2 Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d5dcf7fe1ee9..b9d00dcf9a2d 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1943,4 +1943,19 @@ static inline void __user *to_user_ptr(u64 address) return (void __user *)(uintptr_t)address; } +static inline unsigned long msecs_to_jiffies_timeout(const unsigned int m) +{ + unsigned long j = msecs_to_jiffies(m); + + return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1); +} + +static inline unsigned long +timespec_to_jiffies_timeout(const struct timespec *value) +{ + unsigned long j = timespec_to_jiffies(value); + + return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1); +} + #endif From 2554fc1fa6dc184ca553f73e3796fa59745efa8a Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:18 +0300 Subject: [PATCH 047/429] drm/i915: use msecs_to_jiffies_timeout instead of open coding the same Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 5d245031e391..98cd85352d9a 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -228,7 +228,7 @@ gmbus_wait_hw_status(struct drm_i915_private *dev_priv, * need to wake up periodically and check that ourselves. */ I915_WRITE(GMBUS4 + reg_offset, gmbus4_irq_en); - for (i = 0; i < msecs_to_jiffies(50) + 1; i++) { + for (i = 0; i < msecs_to_jiffies_timeout(50); i++) { prepare_to_wait(&dev_priv->gmbus_wait_queue, &wait, TASK_UNINTERRUPTIBLE); From e054cc3937a4a58e77870d4c922a7b21824b610a Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:19 +0300 Subject: [PATCH 048/429] drm/i915: avoid premature timeouts in __wait_seqno() At the moment wait_event_timeout/wait_event_interruptible_timeout may time out 1 jiffy too early, as the calculated expiry time is 1 less than needed. Besides timing out too early this also means that the calculation of the remaining time will be incorrect and we will pass a non-zero remaining time to user space in case of a time out. This is one reason for the following bugzilla report: Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64270 Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6165535d15f0..a6cf8e843973 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1003,7 +1003,7 @@ static int __wait_seqno(struct intel_ring_buffer *ring, u32 seqno, wait_forever = false; } - timeout_jiffies = timespec_to_jiffies(&wait_time); + timeout_jiffies = timespec_to_jiffies_timeout(&wait_time); if (WARN_ON(!ring->irq_get(ring))) return -ENODEV; From 3598706b52cb45ba0a9e8aa99ce5ac59140f2b8b Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 21 May 2013 20:03:20 +0300 Subject: [PATCH 049/429] drm/i915: avoid premature DP AUX timeouts During DP AUX communication we might time out 1 jiffy too early, because the calculated expiry jiffy value is one less than needed. This is only one reason for false DP AUX timeouts. For a complete solution we also need the following fix, which is now queued for mainline: http://marc.info/?l=linux-kernel&m=136748515710837&w=2 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64133 Signed-off-by: Imre Deak Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 2 +- drivers/gpu/drm/i915/intel_i2c.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 3d704b706a8d..70789b1b5642 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -303,7 +303,7 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq) #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0) if (has_aux_irq) done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, - msecs_to_jiffies(10)); + msecs_to_jiffies_timeout(10)); else done = wait_for_atomic(C, 10) == 0; if (!done) diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 98cd85352d9a..639fe192997c 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -263,7 +263,8 @@ gmbus_wait_idle(struct drm_i915_private *dev_priv) /* Important: The hw handles only the first bit, so set only one! */ I915_WRITE(GMBUS4 + reg_offset, GMBUS_IDLE_EN); - ret = wait_event_timeout(dev_priv->gmbus_wait_queue, C, 10); + ret = wait_event_timeout(dev_priv->gmbus_wait_queue, C, + msecs_to_jiffies_timeout(10)); I915_WRITE(GMBUS4 + reg_offset, 0); From 08c96abd611beadf2af414a306fe0fb02ba706ff Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 18 May 2013 21:28:15 +0200 Subject: [PATCH 050/429] ath9k: prevent aggregation session deadlocks Waiting for all subframes of an existing aggregation session to drain before allowing mac80211 to start a new one is fragile and deadlocks caused by this behavior have been observed. Since mac80211 has proper synchronization for aggregation session start/stop handling, a better approach to session handling is to simply allow mac80211 to start a new session at any time. This requires changing the code to discard any packets outside of the BlockAck window in the A-MPDU software retry code. This patch implements the above and also simplifies the code. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 14 +-- drivers/net/wireless/ath/ath9k/main.c | 3 +- drivers/net/wireless/ath/ath9k/rc.c | 5 +- drivers/net/wireless/ath/ath9k/xmit.c | 138 +++++++------------------ 4 files changed, 46 insertions(+), 114 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 366002f266f8..42b03dc39d14 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -251,10 +251,9 @@ struct ath_atx_tid { int tidno; int baw_head; /* first un-acked tx buffer */ int baw_tail; /* next unused tx buffer slot */ - int sched; - int paused; - u8 state; - bool stop_cb; + bool sched; + bool paused; + bool active; }; struct ath_node { @@ -275,10 +274,6 @@ struct ath_node { #endif }; -#define AGGR_CLEANUP BIT(1) -#define AGGR_ADDBA_COMPLETE BIT(2) -#define AGGR_ADDBA_PROGRESS BIT(3) - struct ath_tx_control { struct ath_txq *txq; struct ath_node *an; @@ -352,8 +347,7 @@ void ath_tx_tasklet(struct ath_softc *sc); void ath_tx_edma_tasklet(struct ath_softc *sc); int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, u16 *ssn); -bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, - bool flush); +void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid); void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid); void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 2382d1262e7f..5092ecae7706 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1709,7 +1709,8 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, flush = true; case IEEE80211_AMPDU_TX_STOP_CONT: ath9k_ps_wakeup(sc); - if (ath_tx_aggr_stop(sc, sta, tid, flush)) + ath_tx_aggr_stop(sc, sta, tid); + if (!flush) ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); ath9k_ps_restore(sc); break; diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index aa4d368d8d3d..7eb1f4b458e4 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1227,10 +1227,7 @@ static bool ath_tx_aggr_check(struct ath_softc *sc, struct ieee80211_sta *sta, return false; txtid = ATH_AN_2_TID(an, tidno); - - if (!(txtid->state & (AGGR_ADDBA_COMPLETE | AGGR_ADDBA_PROGRESS))) - return true; - return false; + return !txtid->active; } diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 14bb3354ea64..1c9b1bac8b0d 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -125,24 +125,6 @@ static void ath_tx_queue_tid(struct ath_txq *txq, struct ath_atx_tid *tid) list_add_tail(&ac->list, &txq->axq_acq); } -static void ath_tx_resume_tid(struct ath_softc *sc, struct ath_atx_tid *tid) -{ - struct ath_txq *txq = tid->ac->txq; - - WARN_ON(!tid->paused); - - ath_txq_lock(sc, txq); - tid->paused = false; - - if (skb_queue_empty(&tid->buf_q)) - goto unlock; - - ath_tx_queue_tid(txq, tid); - ath_txq_schedule(sc, txq); -unlock: - ath_txq_unlock_complete(sc, txq); -} - static struct ath_frame_info *get_frame_info(struct sk_buff *skb) { struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); @@ -164,20 +146,7 @@ static void ath_set_rates(struct ieee80211_vif *vif, struct ieee80211_sta *sta, ARRAY_SIZE(bf->rates)); } -static void ath_tx_clear_tid(struct ath_softc *sc, struct ath_atx_tid *tid) -{ - tid->state &= ~AGGR_ADDBA_COMPLETE; - tid->state &= ~AGGR_CLEANUP; - if (!tid->stop_cb) - return; - - ieee80211_start_tx_ba_cb_irqsafe(tid->an->vif, tid->an->sta->addr, - tid->tidno); - tid->stop_cb = false; -} - -static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid, - bool flush_packets) +static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid) { struct ath_txq *txq = tid->ac->txq; struct sk_buff *skb; @@ -194,15 +163,16 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid, while ((skb = __skb_dequeue(&tid->buf_q))) { fi = get_frame_info(skb); bf = fi->bf; - if (!bf && !flush_packets) - bf = ath_tx_setup_buffer(sc, txq, tid, skb); if (!bf) { - ieee80211_free_txskb(sc->hw, skb); - continue; + bf = ath_tx_setup_buffer(sc, txq, tid, skb); + if (!bf) { + ieee80211_free_txskb(sc->hw, skb); + continue; + } } - if (fi->retries || flush_packets) { + if (fi->retries) { list_add_tail(&bf->list, &bf_head); ath_tx_update_baw(sc, tid, bf->bf_state.seqno); ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0); @@ -213,10 +183,7 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid, } } - if (tid->baw_head == tid->baw_tail) - ath_tx_clear_tid(sc, tid); - - if (sendbar && !flush_packets) { + if (sendbar) { ath_txq_unlock(sc, txq); ath_send_bar(tid, tid->seq_start); ath_txq_lock(sc, txq); @@ -499,19 +466,19 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, tx_info = IEEE80211_SKB_CB(skb); fi = get_frame_info(skb); - if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, seqno))) { + if (!BAW_WITHIN(tid->seq_start, tid->baw_size, seqno)) { + /* + * Outside of the current BlockAck window, + * maybe part of a previous session + */ + txfail = 1; + } else if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, seqno))) { /* transmit completion, subframe is * acked by block ack */ acked_cnt++; } else if (!isaggr && txok) { /* transmit completion */ acked_cnt++; - } else if (tid->state & AGGR_CLEANUP) { - /* - * cleanup in progress, just fail - * the un-acked sub-frames - */ - txfail = 1; } else if (flush) { txpending = 1; } else if (fi->retries < ATH_MAX_SW_RETRIES) { @@ -535,7 +502,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, if (bf_next != NULL || !bf_last->bf_stale) list_move_tail(&bf->list, &bf_head); - if (!txpending || (tid->state & AGGR_CLEANUP)) { + if (!txpending) { /* * complete the acked-ones/xretried ones; update * block-ack window @@ -609,9 +576,6 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, ath_txq_lock(sc, txq); } - if (tid->state & AGGR_CLEANUP) - ath_tx_flush_tid(sc, tid, false); - rcu_read_unlock(); if (needreset) @@ -1244,9 +1208,6 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, an = (struct ath_node *)sta->drv_priv; txtid = ATH_AN_2_TID(an, tid); - if (txtid->state & (AGGR_CLEANUP | AGGR_ADDBA_COMPLETE)) - return -EAGAIN; - /* update ampdu factor/density, they may have changed. This may happen * in HT IBSS when a beacon with HT-info is received after the station * has already been added. @@ -1258,7 +1219,7 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, an->mpdudensity = density; } - txtid->state |= AGGR_ADDBA_PROGRESS; + txtid->active = true; txtid->paused = true; *ssn = txtid->seq_start = txtid->seq_next; txtid->bar_index = -1; @@ -1269,45 +1230,17 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta, return 0; } -bool ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid, - bool flush) +void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid) { struct ath_node *an = (struct ath_node *)sta->drv_priv; struct ath_atx_tid *txtid = ATH_AN_2_TID(an, tid); struct ath_txq *txq = txtid->ac->txq; - bool ret = !flush; - - if (flush) - txtid->stop_cb = false; - - if (txtid->state & AGGR_CLEANUP) - return false; - - if (!(txtid->state & AGGR_ADDBA_COMPLETE)) { - txtid->state &= ~AGGR_ADDBA_PROGRESS; - return ret; - } ath_txq_lock(sc, txq); + txtid->active = false; txtid->paused = true; - - /* - * If frames are still being transmitted for this TID, they will be - * cleaned up during tx completion. To prevent race conditions, this - * TID can only be reused after all in-progress subframes have been - * completed. - */ - if (txtid->baw_head != txtid->baw_tail) { - txtid->state |= AGGR_CLEANUP; - ret = false; - txtid->stop_cb = !flush; - } else { - txtid->state &= ~AGGR_ADDBA_COMPLETE; - } - - ath_tx_flush_tid(sc, txtid, flush); + ath_tx_flush_tid(sc, txtid); ath_txq_unlock_complete(sc, txq); - return ret; } void ath_tx_aggr_sleep(struct ieee80211_sta *sta, struct ath_softc *sc, @@ -1371,18 +1304,28 @@ void ath_tx_aggr_wakeup(struct ath_softc *sc, struct ath_node *an) } } -void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid) +void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, + u16 tidno) { - struct ath_atx_tid *txtid; + struct ath_atx_tid *tid; struct ath_node *an; + struct ath_txq *txq; an = (struct ath_node *)sta->drv_priv; + tid = ATH_AN_2_TID(an, tidno); + txq = tid->ac->txq; - txtid = ATH_AN_2_TID(an, tid); - txtid->baw_size = IEEE80211_MIN_AMPDU_BUF << sta->ht_cap.ampdu_factor; - txtid->state |= AGGR_ADDBA_COMPLETE; - txtid->state &= ~AGGR_ADDBA_PROGRESS; - ath_tx_resume_tid(sc, txtid); + ath_txq_lock(sc, txq); + + tid->baw_size = IEEE80211_MIN_AMPDU_BUF << sta->ht_cap.ampdu_factor; + tid->paused = false; + + if (!skb_queue_empty(&tid->buf_q)) { + ath_tx_queue_tid(txq, tid); + ath_txq_schedule(sc, txq); + } + + ath_txq_unlock_complete(sc, txq); } /********************/ @@ -2431,13 +2374,10 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an) tid->baw_head = tid->baw_tail = 0; tid->sched = false; tid->paused = false; - tid->state &= ~AGGR_CLEANUP; + tid->active = false; __skb_queue_head_init(&tid->buf_q); acno = TID_TO_WME_AC(tidno); tid->ac = &an->ac[acno]; - tid->state &= ~AGGR_ADDBA_COMPLETE; - tid->state &= ~AGGR_ADDBA_PROGRESS; - tid->stop_cb = false; } for (acno = 0, ac = &an->ac[acno]; @@ -2474,7 +2414,7 @@ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an) } ath_tid_drain(sc, txq, tid); - ath_tx_clear_tid(sc, tid); + tid->active = false; ath_txq_unlock(sc, txq); } From 0b6e81d1658e2aa6b3acc942088c529fee5aa62e Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 22 May 2013 19:19:25 +0200 Subject: [PATCH 051/429] ASoC: cs42l52: microphone bias is controlled by IFACE_CTL2 register. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown --- sound/soc/codecs/cs42l52.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 0f6f481cec09..1a17c8575886 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -225,7 +225,7 @@ static const char * const mic_bias_level_text[] = { }; static const struct soc_enum mic_bias_level_enum = - SOC_ENUM_SINGLE(CS42L52_IFACE_CTL1, 0, + SOC_ENUM_SINGLE(CS42L52_IFACE_CTL2, 0, ARRAY_SIZE(mic_bias_level_text), mic_bias_level_text); static const char * const cs42l52_mic_text[] = { "Single", "Differential" }; From 99674c721fd9393030365b66cbbceaa193b0c0fd Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 22 May 2013 19:19:26 +0200 Subject: [PATCH 052/429] ASoC: cs42l52: fix bogus shifts in "Speaker Volume" and "PCM Mixer Volume" controls. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown --- sound/soc/codecs/cs42l52.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 1a17c8575886..8465c1fa6bf9 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -413,7 +413,7 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = { SOC_ENUM("Headphone Analog Gain", hp_gain_enum), SOC_DOUBLE_R_SX_TLV("Speaker Volume", CS42L52_SPKA_VOL, - CS42L52_SPKB_VOL, 7, 0x1, 0xff, hl_tlv), + CS42L52_SPKB_VOL, 0, 0x1, 0xff, hl_tlv), SOC_DOUBLE_R_SX_TLV("Bypass Volume", CS42L52_PASSTHRUA_VOL, CS42L52_PASSTHRUB_VOL, 6, 0x18, 0x90, pga_tlv), @@ -441,7 +441,7 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = { SOC_DOUBLE_R_SX_TLV("PCM Mixer Volume", CS42L52_PCMA_MIXER_VOL, CS42L52_PCMB_MIXER_VOL, - 6, 0x7f, 0x19, hl_tlv), + 0, 0x7f, 0x19, hl_tlv), SOC_DOUBLE_R("PCM Mixer Switch", CS42L52_PCMA_MIXER_VOL, CS42L52_PCMB_MIXER_VOL, 7, 1, 1), From 40e2516acb426f349c70e3bada821f3203b69de2 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Wed, 22 May 2013 19:19:27 +0200 Subject: [PATCH 053/429] ASoC: cs42l52: fix master playback mute mask. The mask should define the bits to change in the register, not the bits to preserve. This fixes the inadvertent changes of the "Headphone Analog Gain" value during mute/unmute. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown --- sound/soc/codecs/cs42l52.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs42l52.h b/sound/soc/codecs/cs42l52.h index 60985c059071..4277012c4719 100644 --- a/sound/soc/codecs/cs42l52.h +++ b/sound/soc/codecs/cs42l52.h @@ -157,7 +157,7 @@ #define CS42L52_PB_CTL1_INV_PCMA (1 << 2) #define CS42L52_PB_CTL1_MSTB_MUTE (1 << 1) #define CS42L52_PB_CTL1_MSTA_MUTE (1 << 0) -#define CS42L52_PB_CTL1_MUTE_MASK 0xFFFD +#define CS42L52_PB_CTL1_MUTE_MASK 0x03 #define CS42L52_PB_CTL1_MUTE 3 #define CS42L52_PB_CTL1_UNMUTE 0 From beaee9cac180e37bbb30d538bcea0ebbcf4fba0e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 30 Apr 2013 10:57:05 +0300 Subject: [PATCH 054/429] atmel: printing bogus information There was an extra ';' character added to the end of the if statement which means that it always prints that the /proc entry wasn't created even though it was. Signed-off-by: Dan Carpenter Acked-by: David Howells Signed-off-by: John W. Linville --- drivers/net/wireless/atmel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 830bb1d1f957..b827d51c30a3 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -1624,7 +1624,7 @@ struct net_device *init_atmel_card(unsigned short irq, unsigned long port, netif_carrier_off(dev); - if (!proc_create_data("driver/atmel", 0, NULL, &atmel_proc_fops, priv)); + if (!proc_create_data("driver/atmel", 0, NULL, &atmel_proc_fops, priv)) printk(KERN_WARNING "atmel: unable to create /proc entry.\n"); printk(KERN_INFO "%s: Atmel at76c50x. Version %d.%d. MAC %pM\n", From cc9a3e99949af4bcaf9027fc57f824b595a5fcac Mon Sep 17 00:00:00 2001 From: Jiada Wang Date: Mon, 20 May 2013 21:51:51 +0900 Subject: [PATCH 055/429] ARM i.MX6q: fix for ldb_di_sels As pll5_video_div has been introduced to represent the clock generated from post-divider for video. Instead of pll5_video, pll5_video_div should be proper root clock for ldb_di_sel. Signed-off-by: Jiada Wang Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index dda9a2bd3acb..ba2de54a39db 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -188,7 +188,7 @@ static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m" static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", }; static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; -static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; +static const char *ldb_di_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; From b5dd0bb43e209455fb83161d4c8774ce2c23f6e2 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 23 May 2013 08:04:09 +0200 Subject: [PATCH 056/429] microblaze: Use proper casting for inb/inw/inl in io.h We are going to move to asm-generic/io.h but let's fix compilation warnings first for 3.10. Warning message: arch/microblaze/include/asm/io.h:126:26: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] #define inb(port) readb((u8 *)((port))) ... Signed-off-by: Michal Simek --- arch/microblaze/include/asm/io.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index 8cb8a8566ede..2565cb94f32f 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -123,11 +123,11 @@ static inline void writel(unsigned int v, volatile void __iomem *addr) * inb_p/inw_p/... * The macros don't do byte-swapping. */ -#define inb(port) readb((u8 *)((port))) +#define inb(port) readb((u8 *)((unsigned long)(port))) #define outb(val, port) writeb((val), (u8 *)((unsigned long)(port))) -#define inw(port) readw((u16 *)((port))) +#define inw(port) readw((u16 *)((unsigned long)(port))) #define outw(val, port) writew((val), (u16 *)((unsigned long)(port))) -#define inl(port) readl((u32 *)((port))) +#define inl(port) readl((u32 *)((unsigned long)(port))) #define outl(val, port) writel((val), (u32 *)((unsigned long)(port))) #define inb_p(port) inb((port)) From ad06156876c0e55a01e13e1f2dd5c7f9262b1dfa Mon Sep 17 00:00:00 2001 From: Matthijs Kooijman Date: Wed, 8 May 2013 12:59:04 +0200 Subject: [PATCH 057/429] kbuild: Don't assume dts files live in arch/*/boot/dts In commit b40b25ff (kbuild: always run gcc -E on *.dts, remove cmd_dtc_cpp), dts building was changed to always use the C preprocessor. This meant that the .dts file passed to dtc is not the original, but the preprocessed one. When compiling with a separate build directory (i.e., with O=), this preprocessed file will not live in the same directory as the original. When the .dts file includes .dtsi files, dtc will look for them in the build directory, not in the source directory and compilation will fail. The commit referenced above tried to fix this by passing arch/*/boot/dts as an include path to dtc. However, for mips, the .dts files are not in this directory, so dts compilation on mips breaks for some targets. Instead of hardcoding this particular include path, this commit just uses the directory of the .dts file that is being compiled, which effectively restores the previous behaviour wrt includes. For most .dts files, this path is just the same as the previous hardcoded arch/*/boot/dts path. This was tested on a mips (rt3052) and an arm (bcm2835) target. Signed-off-by: Matthijs Kooijman Reviewed-by: Stephen Warren Signed-off-by: Michal Marek --- scripts/Makefile.lib | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 51bb3de680b6..8337663aa298 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -264,7 +264,7 @@ $(obj)/%.dtb.S: $(obj)/%.dtb quiet_cmd_dtc = DTC $@ cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \ - -i $(srctree)/arch/$(SRCARCH)/boot/dts $(DTC_FLAGS) \ + -i $(dir $<) $(DTC_FLAGS) \ -d $(depfile).dtc $(dtc-tmp) ; \ cat $(depfile).pre $(depfile).dtc > $(depfile) From be8a6d452bda4b1b842e81a99bb86f77a1cb8279 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 22 May 2013 21:27:22 +0000 Subject: [PATCH 058/429] MIPS: Remove duplicate definition of check_for_high_segbits. In C, one definition is sufficient. Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5304/ Signed-off-by: Ralf Baechle --- arch/mips/mm/tlbex.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index ce9818eef7d3..afeef93f81a7 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -301,10 +301,6 @@ static u32 tlb_handler[128] __cpuinitdata; static struct uasm_label labels[128] __cpuinitdata; static struct uasm_reloc relocs[128] __cpuinitdata; -#ifdef CONFIG_64BIT -static int check_for_high_segbits __cpuinitdata; -#endif - static int check_for_high_segbits __cpuinitdata; static unsigned int kscratch_used_mask __cpuinitdata; From 8f657933a3c2086d4731350c98f91a990783c0d3 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 22 May 2013 22:35:56 +0000 Subject: [PATCH 059/429] MIPS: Quit exposing Kconfig symbols in uapi headers. The kernel's struct pt_regs has many fields conditional on various Kconfig variables, we cannot be exporting this garbage to user-space. Move the kernel's definition to asm/ptrace.h, and put a uapi only version in uapi/asm/ptrace.h gated by #ifndef __KERNEL__ Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5305/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/ptrace.h | 32 +++++++++++++++++++++++++++++ arch/mips/include/uapi/asm/ptrace.h | 17 ++------------- 2 files changed, 34 insertions(+), 15 deletions(-) diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index a3186f2bb8a0..5e6cd0947393 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -16,6 +16,38 @@ #include #include +/* + * This struct defines the way the registers are stored on the stack during a + * system call/exception. As usual the registers k0/k1 aren't being saved. + */ +struct pt_regs { +#ifdef CONFIG_32BIT + /* Pad bytes for argument save space on the stack. */ + unsigned long pad0[6]; +#endif + + /* Saved main processor registers. */ + unsigned long regs[32]; + + /* Saved special registers. */ + unsigned long cp0_status; + unsigned long hi; + unsigned long lo; +#ifdef CONFIG_CPU_HAS_SMARTMIPS + unsigned long acx; +#endif + unsigned long cp0_badvaddr; + unsigned long cp0_cause; + unsigned long cp0_epc; +#ifdef CONFIG_MIPS_MT_SMTC + unsigned long cp0_tcstatus; +#endif /* CONFIG_MIPS_MT_SMTC */ +#ifdef CONFIG_CPU_CAVIUM_OCTEON + unsigned long long mpl[3]; /* MTM{0,1,2} */ + unsigned long long mtp[3]; /* MTP{0,1,2} */ +#endif +} __aligned(8); + struct task_struct; extern int ptrace_getregs(struct task_struct *child, __s64 __user *data); diff --git a/arch/mips/include/uapi/asm/ptrace.h b/arch/mips/include/uapi/asm/ptrace.h index 4d58d8468705..b26f7e317279 100644 --- a/arch/mips/include/uapi/asm/ptrace.h +++ b/arch/mips/include/uapi/asm/ptrace.h @@ -22,16 +22,12 @@ #define DSP_CONTROL 77 #define ACX 78 +#ifndef __KERNEL__ /* * This struct defines the way the registers are stored on the stack during a * system call/exception. As usual the registers k0/k1 aren't being saved. */ struct pt_regs { -#ifdef CONFIG_32BIT - /* Pad bytes for argument save space on the stack. */ - unsigned long pad0[6]; -#endif - /* Saved main processor registers. */ unsigned long regs[32]; @@ -39,20 +35,11 @@ struct pt_regs { unsigned long cp0_status; unsigned long hi; unsigned long lo; -#ifdef CONFIG_CPU_HAS_SMARTMIPS - unsigned long acx; -#endif unsigned long cp0_badvaddr; unsigned long cp0_cause; unsigned long cp0_epc; -#ifdef CONFIG_MIPS_MT_SMTC - unsigned long cp0_tcstatus; -#endif /* CONFIG_MIPS_MT_SMTC */ -#ifdef CONFIG_CPU_CAVIUM_OCTEON - unsigned long long mpl[3]; /* MTM{0,1,2} */ - unsigned long long mtp[3]; /* MTP{0,1,2} */ -#endif } __attribute__ ((aligned (8))); +#endif /* __KERNEL__ */ /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ #define PTRACE_GETREGS 12 From 591a0ac7f14aae6bf11b1cb6b5a68480bd644ddb Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Thu, 23 May 2013 12:07:50 +0300 Subject: [PATCH 060/429] OMAPDSS: Fix crash with DT boot When booting with DT, there's a crash when omapfb is probed. This is caused by the fact that omapdss+DT is not yet supported, and thus omapdss is not probed at all. On the other hand, omapfb is always probed. When omapfb tries to use omapdss, there's a NULL pointer dereference crash. The same error should most likely happen with omapdrm and omap_vout also. To fix this, add an "initialized" state to omapdss. When omapdss has been probed, it's marked as initialized. omapfb, omapdrm and omap_vout check this state when they are probed to see that omapdss is actually there. Signed-off-by: Tomi Valkeinen Tested-by: Peter Ujfalusi --- drivers/gpu/drm/omapdrm/omap_drv.c | 3 +++ drivers/media/platform/omap/omap_vout.c | 3 +++ drivers/video/omap2/dss/core.c | 20 +++++++++++++++++++- drivers/video/omap2/omapfb/omapfb-main.c | 3 +++ include/video/omapdss.h | 1 + 5 files changed, 29 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c index 079c54c6f94c..902074bbd1f4 100644 --- a/drivers/gpu/drm/omapdrm/omap_drv.c +++ b/drivers/gpu/drm/omapdrm/omap_drv.c @@ -548,6 +548,9 @@ static void pdev_shutdown(struct platform_device *device) static int pdev_probe(struct platform_device *device) { + if (omapdss_is_initialized() == false) + return -EPROBE_DEFER; + DBG("%s", device->name); return drm_platform_init(&omap_drm_driver, device); } diff --git a/drivers/media/platform/omap/omap_vout.c b/drivers/media/platform/omap/omap_vout.c index 96c4a17e4280..0a489bd29d6b 100644 --- a/drivers/media/platform/omap/omap_vout.c +++ b/drivers/media/platform/omap/omap_vout.c @@ -2144,6 +2144,9 @@ static int __init omap_vout_probe(struct platform_device *pdev) struct omap_dss_device *def_display; struct omap2video_device *vid_dev = NULL; + if (omapdss_is_initialized() == false) + return -EPROBE_DEFER; + ret = omapdss_compat_init(); if (ret) { dev_err(&pdev->dev, "failed to init dss\n"); diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c index f8779d4750ba..f49ddb9e7c82 100644 --- a/drivers/video/omap2/dss/core.c +++ b/drivers/video/omap2/dss/core.c @@ -53,6 +53,8 @@ static char *def_disp_name; module_param_named(def_disp, def_disp_name, charp, 0); MODULE_PARM_DESC(def_disp, "default display name"); +static bool dss_initialized; + const char *omapdss_get_default_display_name(void) { return core.default_display_name; @@ -66,6 +68,12 @@ enum omapdss_version omapdss_get_version(void) } EXPORT_SYMBOL(omapdss_get_version); +bool omapdss_is_initialized(void) +{ + return dss_initialized; +} +EXPORT_SYMBOL(omapdss_is_initialized); + struct platform_device *dss_get_core_pdev(void) { return core.pdev; @@ -606,6 +614,8 @@ static int __init omap_dss_init(void) return r; } + dss_initialized = true; + return 0; } @@ -636,7 +646,15 @@ static int __init omap_dss_init(void) static int __init omap_dss_init2(void) { - return omap_dss_register_drivers(); + int r; + + r = omap_dss_register_drivers(); + if (r) + return r; + + dss_initialized = true; + + return 0; } core_initcall(omap_dss_init); diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c index 717f13a93351..bb5f9fee3659 100644 --- a/drivers/video/omap2/omapfb/omapfb-main.c +++ b/drivers/video/omap2/omapfb/omapfb-main.c @@ -2416,6 +2416,9 @@ static int __init omapfb_probe(struct platform_device *pdev) DBG("omapfb_probe\n"); + if (omapdss_is_initialized() == false) + return -EPROBE_DEFER; + if (pdev->num_resources != 0) { dev_err(&pdev->dev, "probed for an unknown device\n"); r = -ENODEV; diff --git a/include/video/omapdss.h b/include/video/omapdss.h index caefa093337d..9b52340ec3ff 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -741,6 +741,7 @@ struct omap_dss_driver { }; enum omapdss_version omapdss_get_version(void); +bool omapdss_is_initialized(void); int omap_dss_register_driver(struct omap_dss_driver *); void omap_dss_unregister_driver(struct omap_dss_driver *); From 2a7851bffb008ff4882eee673da74718997b4265 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 17 May 2013 03:56:10 +0000 Subject: [PATCH 061/429] netfilter: add nf_ipv6_ops hook to fix xt_addrtype with IPv6 Quoting https://bugzilla.netfilter.org/show_bug.cgi?id=812: [ ip6tables -m addrtype ] When I tried to use in the nat/PREROUTING it messes up the routing cache even if the rule didn't matched at all. [..] If I remove the --limit-iface-in from the non-working scenario, so just use the -m addrtype --dst-type LOCAL it works! This happens when LOCAL type matching is requested with --limit-iface-in, and the default ipv6 route is via the interface the packet we test arrived on. Because xt_addrtype uses ip6_route_output, the ipv6 routing implementation creates an unwanted cached entry, and the packet won't make it to the real/expected destination. Silently ignoring --limit-iface-in makes the routing work but it breaks rule matching (--dst-type LOCAL with limit-iface-in is supposed to only match if the dst address is configured on the incoming interface; without --limit-iface-in it will match if the address is reachable via lo). The test should call ipv6_chk_addr() instead. However, this would add a link-time dependency on ipv6. There are two possible solutions: 1) Revert the commit that moved ipt_addrtype to xt_addrtype, and put ipv6 specific code into ip6t_addrtype. 2) add new "nf_ipv6_ops" struct to register pointers to ipv6 functions. While the former might seem preferable, Pablo pointed out that there are more xt modules with link-time dependeny issues regarding ipv6, so lets go for 2). Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter_ipv6.h | 16 ++++++++++++++++ include/net/addrconf.h | 2 +- net/ipv6/addrconf.c | 2 +- net/ipv6/netfilter.c | 7 +++++++ net/netfilter/core.c | 2 ++ net/netfilter/xt_addrtype.c | 29 +++++++++++++++++------------ 6 files changed, 44 insertions(+), 14 deletions(-) diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index 98ffb54988b6..2d4df6ce043e 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -17,6 +17,22 @@ extern __sum16 nf_ip6_checksum(struct sk_buff *skb, unsigned int hook, extern int ipv6_netfilter_init(void); extern void ipv6_netfilter_fini(void); + +/* + * Hook functions for ipv6 to allow xt_* modules to be built-in even + * if IPv6 is a module. + */ +struct nf_ipv6_ops { + int (*chk_addr)(struct net *net, const struct in6_addr *addr, + const struct net_device *dev, int strict); +}; + +extern const struct nf_ipv6_ops __rcu *nf_ipv6_ops; +static inline const struct nf_ipv6_ops *nf_get_ipv6_ops(void) +{ + return rcu_dereference(nf_ipv6_ops); +} + #else /* CONFIG_NETFILTER */ static inline int ipv6_netfilter_init(void) { return 0; } static inline void ipv6_netfilter_fini(void) { return; } diff --git a/include/net/addrconf.h b/include/net/addrconf.h index 84a6440f1f19..21f702704f24 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -65,7 +65,7 @@ extern int addrconf_set_dstaddr(struct net *net, extern int ipv6_chk_addr(struct net *net, const struct in6_addr *addr, - struct net_device *dev, + const struct net_device *dev, int strict); #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index d1ab6ab29a55..d1b2d8034b54 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -1487,7 +1487,7 @@ static int ipv6_count_addresses(struct inet6_dev *idev) } int ipv6_chk_addr(struct net *net, const struct in6_addr *addr, - struct net_device *dev, int strict) + const struct net_device *dev, int strict) { struct inet6_ifaddr *ifp; unsigned int hash = inet6_addr_hash(addr); diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c index 72836f40b730..95f3f1da0d7f 100644 --- a/net/ipv6/netfilter.c +++ b/net/ipv6/netfilter.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -186,6 +187,10 @@ static __sum16 nf_ip6_checksum_partial(struct sk_buff *skb, unsigned int hook, return csum; }; +static const struct nf_ipv6_ops ipv6ops = { + .chk_addr = ipv6_chk_addr, +}; + static const struct nf_afinfo nf_ip6_afinfo = { .family = AF_INET6, .checksum = nf_ip6_checksum, @@ -198,6 +203,7 @@ static const struct nf_afinfo nf_ip6_afinfo = { int __init ipv6_netfilter_init(void) { + RCU_INIT_POINTER(nf_ipv6_ops, &ipv6ops); return nf_register_afinfo(&nf_ip6_afinfo); } @@ -206,5 +212,6 @@ int __init ipv6_netfilter_init(void) */ void ipv6_netfilter_fini(void) { + RCU_INIT_POINTER(nf_ipv6_ops, NULL); nf_unregister_afinfo(&nf_ip6_afinfo); } diff --git a/net/netfilter/core.c b/net/netfilter/core.c index 07c865a31a3d..857ca9f35177 100644 --- a/net/netfilter/core.c +++ b/net/netfilter/core.c @@ -30,6 +30,8 @@ static DEFINE_MUTEX(afinfo_mutex); const struct nf_afinfo __rcu *nf_afinfo[NFPROTO_NUMPROTO] __read_mostly; EXPORT_SYMBOL(nf_afinfo); +const struct nf_ipv6_ops __rcu *nf_ipv6_ops __read_mostly; +EXPORT_SYMBOL_GPL(nf_ipv6_ops); int nf_register_afinfo(const struct nf_afinfo *afinfo) { diff --git a/net/netfilter/xt_addrtype.c b/net/netfilter/xt_addrtype.c index 49c5ff7f6dd6..68ff29f60867 100644 --- a/net/netfilter/xt_addrtype.c +++ b/net/netfilter/xt_addrtype.c @@ -22,6 +22,7 @@ #include #endif +#include #include #include @@ -33,12 +34,12 @@ MODULE_ALIAS("ip6t_addrtype"); #if IS_ENABLED(CONFIG_IP6_NF_IPTABLES) static u32 match_lookup_rt6(struct net *net, const struct net_device *dev, - const struct in6_addr *addr) + const struct in6_addr *addr, u16 mask) { const struct nf_afinfo *afinfo; struct flowi6 flow; struct rt6_info *rt; - u32 ret; + u32 ret = 0; int route_err; memset(&flow, 0, sizeof(flow)); @@ -49,12 +50,19 @@ static u32 match_lookup_rt6(struct net *net, const struct net_device *dev, rcu_read_lock(); afinfo = nf_get_afinfo(NFPROTO_IPV6); - if (afinfo != NULL) - route_err = afinfo->route(net, (struct dst_entry **)&rt, - flowi6_to_flowi(&flow), !!dev); - else - route_err = 1; + if (afinfo != NULL) { + const struct nf_ipv6_ops *v6ops; + if (dev && (mask & XT_ADDRTYPE_LOCAL)) { + v6ops = nf_get_ipv6_ops(); + if (v6ops && v6ops->chk_addr(net, addr, dev, true)) + ret = XT_ADDRTYPE_LOCAL; + } + route_err = afinfo->route(net, (struct dst_entry **)&rt, + flowi6_to_flowi(&flow), false); + } else { + route_err = 1; + } rcu_read_unlock(); if (route_err) @@ -62,15 +70,12 @@ static u32 match_lookup_rt6(struct net *net, const struct net_device *dev, if (rt->rt6i_flags & RTF_REJECT) ret = XT_ADDRTYPE_UNREACHABLE; - else - ret = 0; - if (rt->rt6i_flags & RTF_LOCAL) + if (dev == NULL && rt->rt6i_flags & RTF_LOCAL) ret |= XT_ADDRTYPE_LOCAL; if (rt->rt6i_flags & RTF_ANYCAST) ret |= XT_ADDRTYPE_ANYCAST; - dst_release(&rt->dst); return ret; } @@ -90,7 +95,7 @@ static bool match_type6(struct net *net, const struct net_device *dev, if ((XT_ADDRTYPE_LOCAL | XT_ADDRTYPE_ANYCAST | XT_ADDRTYPE_UNREACHABLE) & mask) - return !!(mask & match_lookup_rt6(net, dev, addr)); + return !!(mask & match_lookup_rt6(net, dev, addr, mask)); return true; } From c5cca97fb915a90b1dcddf737062e67dd8656af8 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 22 May 2013 11:48:40 +0900 Subject: [PATCH 062/429] drm/exynos: use drm_send_vblank_event() helper Rebased. Signed-off-by: Rob Clark Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_crtc.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index 02b36080d00b..db3decffc985 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -397,7 +397,6 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) { struct exynos_drm_private *dev_priv = dev->dev_private; struct drm_pending_vblank_event *e, *t; - struct timeval now; unsigned long flags; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -410,13 +409,8 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) if (crtc != e->pipe) continue; - do_gettimeofday(&now); - e->event.sequence = 0; - e->event.tv_sec = now.tv_sec; - e->event.tv_usec = now.tv_usec; - - list_move_tail(&e->base.link, &e->base.file_priv->event_list); - wake_up_interruptible(&e->base.file_priv->event_wait); + list_del(&e->base.link); + drm_send_vblank_event(dev, -1, e); drm_vblank_put(dev, crtc); } From 20cd2640a295cab46bcd08f4788984ca236fc148 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Tue, 21 May 2013 16:55:58 +0900 Subject: [PATCH 063/429] drm/exynos: wait for the completion of pending page flip This patch fixes the issue that drm_vblank_get() is failed. The issus occurs when next page flip request is tried if previous page flip event wasn't completed yet and then dpms became off. So this patch make sure that page flip event is completed before dpms goes to off. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_crtc.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c index db3decffc985..c200e4d71e3d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c @@ -48,6 +48,8 @@ struct exynos_drm_crtc { unsigned int pipe; unsigned int dpms; enum exynos_crtc_mode mode; + wait_queue_head_t pending_flip_queue; + atomic_t pending_flip; }; static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode) @@ -61,6 +63,13 @@ static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode) return; } + if (mode > DRM_MODE_DPMS_ON) { + /* wait for the completion of page flip. */ + wait_event(exynos_crtc->pending_flip_queue, + atomic_read(&exynos_crtc->pending_flip) == 0); + drm_vblank_off(crtc->dev, exynos_crtc->pipe); + } + exynos_drm_fn_encoder(crtc, &mode, exynos_drm_encoder_crtc_dpms); exynos_crtc->dpms = mode; } @@ -224,6 +233,7 @@ static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc, spin_lock_irq(&dev->event_lock); list_add_tail(&event->base.link, &dev_priv->pageflip_event_list); + atomic_set(&exynos_crtc->pending_flip, 1); spin_unlock_irq(&dev->event_lock); crtc->fb = fb; @@ -343,6 +353,8 @@ int exynos_drm_crtc_create(struct drm_device *dev, unsigned int nr) exynos_crtc->pipe = nr; exynos_crtc->dpms = DRM_MODE_DPMS_OFF; + init_waitqueue_head(&exynos_crtc->pending_flip_queue); + atomic_set(&exynos_crtc->pending_flip, 0); exynos_crtc->plane = exynos_plane_init(dev, 1 << nr, true); if (!exynos_crtc->plane) { kfree(exynos_crtc); @@ -397,6 +409,8 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) { struct exynos_drm_private *dev_priv = dev->dev_private; struct drm_pending_vblank_event *e, *t; + struct drm_crtc *drm_crtc = dev_priv->crtc[crtc]; + struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(drm_crtc); unsigned long flags; DRM_DEBUG_KMS("%s\n", __FILE__); @@ -412,6 +426,8 @@ void exynos_drm_crtc_finish_pageflip(struct drm_device *dev, int crtc) list_del(&e->base.link); drm_send_vblank_event(dev, -1, e); drm_vblank_put(dev, crtc); + atomic_set(&exynos_crtc->pending_flip, 0); + wake_up(&exynos_crtc->pending_flip_queue); } spin_unlock_irqrestore(&dev->event_lock, flags); From d873ab99acd23dcd6860d8e605bc3146a4d4d9a2 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:14 +0900 Subject: [PATCH 064/429] drm/exynos: cleanup device pointer usages Struct device pointer got from platform device pointer is already alsigned as variable, but some functions do not use device pointer. So this patch replaces thoes usages. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 10 +++++----- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 6 +++--- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_hdmi.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_ipp.c | 4 ++-- drivers/gpu/drm/exynos/exynos_drm_vidi.c | 4 ++-- drivers/gpu/drm/exynos/exynos_hdmi.c | 14 +++++++------- drivers/gpu/drm/exynos/exynos_mixer.c | 14 +++++++------- 9 files changed, 29 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 773f583fa964..754d76082eb3 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -1884,7 +1884,7 @@ static int fimc_probe(struct platform_device *pdev) goto err_pm_dis; } - dev_info(&pdev->dev, "drm fimc registered successfully.\n"); + dev_info(dev, "drm fimc registered successfully.\n"); return 0; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 746b282b343a..97c61dbffd82 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -885,7 +885,7 @@ static int fimd_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - if (pdev->dev.of_node) { + if (dev->of_node) { pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { DRM_ERROR("memory allocation for pdata failed\n"); @@ -899,7 +899,7 @@ static int fimd_probe(struct platform_device *pdev) return ret; } } else { - pdata = pdev->dev.platform_data; + pdata = dev->platform_data; if (!pdata) { DRM_ERROR("no platform data specified\n"); return -EINVAL; @@ -912,7 +912,7 @@ static int fimd_probe(struct platform_device *pdev) return -EINVAL; } - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; @@ -930,7 +930,7 @@ static int fimd_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ctx->regs = devm_ioremap_resource(&pdev->dev, res); + ctx->regs = devm_ioremap_resource(dev, res); if (IS_ERR(ctx->regs)) return PTR_ERR(ctx->regs); @@ -942,7 +942,7 @@ static int fimd_probe(struct platform_device *pdev) ctx->irq = res->start; - ret = devm_request_irq(&pdev->dev, ctx->irq, fimd_irq_handler, + ret = devm_request_irq(dev, ctx->irq, fimd_irq_handler, 0, "drm_fimd", ctx); if (ret) { dev_err(dev, "irq request failed.\n"); diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 47a493c8a71f..af75434ee4d7 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -1379,7 +1379,7 @@ static int g2d_probe(struct platform_device *pdev) struct exynos_drm_subdrv *subdrv; int ret; - g2d = devm_kzalloc(&pdev->dev, sizeof(*g2d), GFP_KERNEL); + g2d = devm_kzalloc(dev, sizeof(*g2d), GFP_KERNEL); if (!g2d) { dev_err(dev, "failed to allocate driver data\n"); return -ENOMEM; @@ -1417,7 +1417,7 @@ static int g2d_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - g2d->regs = devm_ioremap_resource(&pdev->dev, res); + g2d->regs = devm_ioremap_resource(dev, res); if (IS_ERR(g2d->regs)) { ret = PTR_ERR(g2d->regs); goto err_put_clk; @@ -1430,7 +1430,7 @@ static int g2d_probe(struct platform_device *pdev) goto err_put_clk; } - ret = devm_request_irq(&pdev->dev, g2d->irq, g2d_irq_handler, 0, + ret = devm_request_irq(dev, g2d->irq, g2d_irq_handler, 0, "drm_g2d", g2d); if (ret < 0) { dev_err(dev, "irq request failed\n"); diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 7841c3b8a20e..487595ac51a8 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1743,7 +1743,7 @@ static int gsc_probe(struct platform_device *pdev) goto err_ippdrv_register; } - dev_info(&pdev->dev, "drm gsc registered successfully.\n"); + dev_info(dev, "drm gsc registered successfully.\n"); return 0; diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c index ba2f0f1aa05f..437fb947e46d 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c @@ -442,7 +442,7 @@ static int exynos_drm_hdmi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) { DRM_LOG_KMS("failed to alloc common hdmi context.\n"); return -ENOMEM; diff --git a/drivers/gpu/drm/exynos/exynos_drm_ipp.c b/drivers/gpu/drm/exynos/exynos_drm_ipp.c index 5c4764af7cb9..be1e88463466 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_ipp.c +++ b/drivers/gpu/drm/exynos/exynos_drm_ipp.c @@ -1909,7 +1909,7 @@ static int ipp_probe(struct platform_device *pdev) struct exynos_drm_subdrv *subdrv; int ret; - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; @@ -1963,7 +1963,7 @@ static int ipp_probe(struct platform_device *pdev) goto err_cmd_workq; } - dev_info(&pdev->dev, "drm ipp registered successfully.\n"); + dev_info(dev, "drm ipp registered successfully.\n"); return 0; diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index 9504b0cd825a..24376c194a5e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -594,7 +594,7 @@ static int vidi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; @@ -612,7 +612,7 @@ static int vidi_probe(struct platform_device *pdev) platform_set_drvdata(pdev, ctx); - ret = device_create_file(&pdev->dev, &dev_attr_connection); + ret = device_create_file(dev, &dev_attr_connection); if (ret < 0) DRM_INFO("failed to create connection sysfs.\n"); diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 7e99853f1e18..8d5dcd15e150 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1946,14 +1946,14 @@ static int hdmi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("[%d]\n", __LINE__); - if (pdev->dev.of_node) { + if (dev->of_node) { pdata = drm_hdmi_dt_parse_pdata(dev); if (IS_ERR(pdata)) { DRM_ERROR("failed to parse dt\n"); return PTR_ERR(pdata); } } else { - pdata = pdev->dev.platform_data; + pdata = dev->platform_data; } if (!pdata) { @@ -1961,14 +1961,14 @@ static int hdmi_probe(struct platform_device *pdev) return -EINVAL; } - drm_hdmi_ctx = devm_kzalloc(&pdev->dev, sizeof(*drm_hdmi_ctx), + drm_hdmi_ctx = devm_kzalloc(dev, sizeof(*drm_hdmi_ctx), GFP_KERNEL); if (!drm_hdmi_ctx) { DRM_ERROR("failed to allocate common hdmi context.\n"); return -ENOMEM; } - hdata = devm_kzalloc(&pdev->dev, sizeof(struct hdmi_context), + hdata = devm_kzalloc(dev, sizeof(struct hdmi_context), GFP_KERNEL); if (!hdata) { DRM_ERROR("out of memory\n"); @@ -1985,7 +1985,7 @@ static int hdmi_probe(struct platform_device *pdev) if (dev->of_node) { const struct of_device_id *match; match = of_match_node(of_match_ptr(hdmi_match_types), - pdev->dev.of_node); + dev->of_node); if (match == NULL) return -ENODEV; hdata->type = (enum hdmi_type)match->data; @@ -2010,11 +2010,11 @@ static int hdmi_probe(struct platform_device *pdev) return -ENOENT; } - hdata->regs = devm_ioremap_resource(&pdev->dev, res); + hdata->regs = devm_ioremap_resource(dev, res); if (IS_ERR(hdata->regs)) return PTR_ERR(hdata->regs); - ret = devm_gpio_request(&pdev->dev, hdata->hpd_gpio, "HPD"); + ret = devm_gpio_request(dev, hdata->hpd_gpio, "HPD"); if (ret) { DRM_ERROR("failed to request HPD gpio\n"); return ret; diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index ec3e376b7e01..7c197d3820c5 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -1061,7 +1061,7 @@ static int mixer_resources_init(struct exynos_drm_hdmi_context *ctx, return -ENXIO; } - mixer_res->mixer_regs = devm_ioremap(&pdev->dev, res->start, + mixer_res->mixer_regs = devm_ioremap(dev, res->start, resource_size(res)); if (mixer_res->mixer_regs == NULL) { dev_err(dev, "register mapping failed.\n"); @@ -1074,7 +1074,7 @@ static int mixer_resources_init(struct exynos_drm_hdmi_context *ctx, return -ENXIO; } - ret = devm_request_irq(&pdev->dev, res->start, mixer_irq_handler, + ret = devm_request_irq(dev, res->start, mixer_irq_handler, 0, "drm_mixer", ctx); if (ret) { dev_err(dev, "request interrupt failed.\n"); @@ -1118,7 +1118,7 @@ static int vp_resources_init(struct exynos_drm_hdmi_context *ctx, return -ENXIO; } - mixer_res->vp_regs = devm_ioremap(&pdev->dev, res->start, + mixer_res->vp_regs = devm_ioremap(dev, res->start, resource_size(res)); if (mixer_res->vp_regs == NULL) { dev_err(dev, "register mapping failed.\n"); @@ -1169,14 +1169,14 @@ static int mixer_probe(struct platform_device *pdev) dev_info(dev, "probe start\n"); - drm_hdmi_ctx = devm_kzalloc(&pdev->dev, sizeof(*drm_hdmi_ctx), + drm_hdmi_ctx = devm_kzalloc(dev, sizeof(*drm_hdmi_ctx), GFP_KERNEL); if (!drm_hdmi_ctx) { DRM_ERROR("failed to allocate common hdmi context.\n"); return -ENOMEM; } - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) { DRM_ERROR("failed to alloc mixer context.\n"); return -ENOMEM; @@ -1187,14 +1187,14 @@ static int mixer_probe(struct platform_device *pdev) if (dev->of_node) { const struct of_device_id *match; match = of_match_node(of_match_ptr(mixer_match_types), - pdev->dev.of_node); + dev->of_node); drv = (struct mixer_drv_data *)match->data; } else { drv = (struct mixer_drv_data *) platform_get_device_id(pdev)->driver_data; } - ctx->dev = &pdev->dev; + ctx->dev = dev; ctx->parent_ctx = (void *)drm_hdmi_ctx; drm_hdmi_ctx->ctx = (void *)ctx; ctx->vp_enabled = drv->is_vp_enabled; From a3ad6976fe5a306fc6cb9e423ac0ef2f06f79189 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:15 +0900 Subject: [PATCH 065/429] drm/exynos: fix build warnings from ipp fimc Becuase of order of headers, there are build warnings and they are fixed with this patch. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 754d76082eb3..75c50f5fe0ed 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -12,9 +12,9 @@ * */ #include -#include #include #include +#include #include #include #include From 7a1b00e0728ff20d6c8e2d6335da05d13d03ef74 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:16 +0900 Subject: [PATCH 066/429] drm/exynos: remove unnecessary devm_kfree devm_kfree does not need for fail case of probe function and for remove function. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 2 -- drivers/gpu/drm/exynos/exynos_drm_rotator.c | 2 -- 2 files changed, 4 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 487595ac51a8..98032d6c62c3 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1748,7 +1748,6 @@ static int gsc_probe(struct platform_device *pdev) return 0; err_ippdrv_register: - devm_kfree(dev, ippdrv->prop_list); pm_runtime_disable(dev); err_get_irq: free_irq(ctx->irq, ctx); @@ -1761,7 +1760,6 @@ static int gsc_remove(struct platform_device *pdev) struct gsc_context *ctx = get_gsc_context(dev); struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv; - devm_kfree(dev, ippdrv->prop_list); exynos_drm_ippdrv_unregister(ippdrv); mutex_destroy(&ctx->lock); diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c index 947f09f15ad1..3aa502a6cf21 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c @@ -709,7 +709,6 @@ static int rotator_probe(struct platform_device *pdev) return 0; err_ippdrv_register: - devm_kfree(dev, ippdrv->prop_list); pm_runtime_disable(dev); err_clk_get: free_irq(rot->irq, rot); @@ -722,7 +721,6 @@ static int rotator_remove(struct platform_device *pdev) struct rot_context *rot = dev_get_drvdata(dev); struct exynos_drm_ippdrv *ippdrv = &rot->ippdrv; - devm_kfree(dev, ippdrv->prop_list); exynos_drm_ippdrv_unregister(ippdrv); pm_runtime_disable(dev); From dcb9a7c74acf59679a537e6fcc7a99c12353e7b8 Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 22 May 2013 21:14:17 +0900 Subject: [PATCH 067/429] drm/exynos: replace request_threaded_irq with devm function devm_request_threaded_irq is used instead of request_threaded_irq and free_irq is removed. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 8 ++------ drivers/gpu/drm/exynos/exynos_drm_gsc.c | 8 ++------ drivers/gpu/drm/exynos/exynos_drm_rotator.c | 11 +++-------- drivers/gpu/drm/exynos/exynos_hdmi.c | 7 +------ 4 files changed, 8 insertions(+), 26 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index 75c50f5fe0ed..4a1616a18ab7 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -1845,7 +1845,7 @@ static int fimc_probe(struct platform_device *pdev) } ctx->irq = res->start; - ret = request_threaded_irq(ctx->irq, NULL, fimc_irq_handler, + ret = devm_request_threaded_irq(dev, ctx->irq, NULL, fimc_irq_handler, IRQF_ONESHOT, "drm_fimc", ctx); if (ret < 0) { dev_err(dev, "failed to request irq.\n"); @@ -1854,7 +1854,7 @@ static int fimc_probe(struct platform_device *pdev) ret = fimc_setup_clocks(ctx); if (ret < 0) - goto err_free_irq; + return ret; ippdrv = &ctx->ippdrv; ippdrv->ops[EXYNOS_DRM_OPS_SRC] = &fimc_src_ops; @@ -1892,8 +1892,6 @@ err_pm_dis: pm_runtime_disable(dev); err_put_clk: fimc_put_clocks(ctx); -err_free_irq: - free_irq(ctx->irq, ctx); return ret; } @@ -1911,8 +1909,6 @@ static int fimc_remove(struct platform_device *pdev) pm_runtime_set_suspended(dev); pm_runtime_disable(dev); - free_irq(ctx->irq, ctx); - return 0; } diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 98032d6c62c3..762f40d548b7 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -1704,7 +1704,7 @@ static int gsc_probe(struct platform_device *pdev) } ctx->irq = res->start; - ret = request_threaded_irq(ctx->irq, NULL, gsc_irq_handler, + ret = devm_request_threaded_irq(dev, ctx->irq, NULL, gsc_irq_handler, IRQF_ONESHOT, "drm_gsc", ctx); if (ret < 0) { dev_err(dev, "failed to request irq.\n"); @@ -1725,7 +1725,7 @@ static int gsc_probe(struct platform_device *pdev) ret = gsc_init_prop_list(ippdrv); if (ret < 0) { dev_err(dev, "failed to init property list.\n"); - goto err_get_irq; + return ret; } DRM_DEBUG_KMS("%s:id[%d]ippdrv[0x%x]\n", __func__, ctx->id, @@ -1749,8 +1749,6 @@ static int gsc_probe(struct platform_device *pdev) err_ippdrv_register: pm_runtime_disable(dev); -err_get_irq: - free_irq(ctx->irq, ctx); return ret; } @@ -1766,8 +1764,6 @@ static int gsc_remove(struct platform_device *pdev) pm_runtime_set_suspended(dev); pm_runtime_disable(dev); - free_irq(ctx->irq, ctx); - return 0; } diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c b/drivers/gpu/drm/exynos/exynos_drm_rotator.c index 3aa502a6cf21..9b6c70964d71 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_rotator.c +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c @@ -666,8 +666,8 @@ static int rotator_probe(struct platform_device *pdev) return rot->irq; } - ret = request_threaded_irq(rot->irq, NULL, rotator_irq_handler, - IRQF_ONESHOT, "drm_rotator", rot); + ret = devm_request_threaded_irq(dev, rot->irq, NULL, + rotator_irq_handler, IRQF_ONESHOT, "drm_rotator", rot); if (ret < 0) { dev_err(dev, "failed to request irq\n"); return ret; @@ -676,8 +676,7 @@ static int rotator_probe(struct platform_device *pdev) rot->clock = devm_clk_get(dev, "rotator"); if (IS_ERR(rot->clock)) { dev_err(dev, "failed to get clock\n"); - ret = PTR_ERR(rot->clock); - goto err_clk_get; + return PTR_ERR(rot->clock); } pm_runtime_enable(dev); @@ -710,8 +709,6 @@ static int rotator_probe(struct platform_device *pdev) err_ippdrv_register: pm_runtime_disable(dev); -err_clk_get: - free_irq(rot->irq, rot); return ret; } @@ -725,8 +722,6 @@ static int rotator_remove(struct platform_device *pdev) pm_runtime_disable(dev); - free_irq(rot->irq, rot); - return 0; } diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 8d5dcd15e150..2f785325d6de 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -2046,7 +2046,7 @@ static int hdmi_probe(struct platform_device *pdev) hdata->hpd = gpio_get_value(hdata->hpd_gpio); - ret = request_threaded_irq(hdata->irq, NULL, + ret = devm_request_threaded_irq(dev, hdata->irq, NULL, hdmi_irq_thread, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "hdmi", drm_hdmi_ctx); @@ -2075,16 +2075,11 @@ err_ddc: static int hdmi_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct exynos_drm_hdmi_context *ctx = platform_get_drvdata(pdev); - struct hdmi_context *hdata = ctx->ctx; DRM_DEBUG_KMS("[%d] %s\n", __LINE__, __func__); pm_runtime_disable(dev); - free_irq(hdata->irq, ctx); - - /* hdmiphy i2c driver */ i2c_del_driver(&hdmiphy_driver); /* DDC i2c driver */ From 4f36ea6eed2081340c7a7aa98c73187ecfccebff Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 23 May 2013 01:50:46 +0000 Subject: [PATCH 068/429] netfilter: ipt_ULOG: fix non-null terminated string in the nf_log path If nf_log uses ipt_ULOG as logging output, we can deliver non-null terminated strings to user-space since the maximum length of the prefix that is passed by nf_log is NF_LOG_PREFIXLEN but pm->prefix is 32 bytes long (ULOG_PREFIX_LEN). This is actually happening already from nf_conntrack_tcp if ipt_ULOG is used, since it is passing strings longer than 32 bytes. Signed-off-by: Chen Gang Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/ipt_ULOG.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/ipv4/netfilter/ipt_ULOG.c b/net/ipv4/netfilter/ipt_ULOG.c index cf08218ddbcf..ff4b781b1056 100644 --- a/net/ipv4/netfilter/ipt_ULOG.c +++ b/net/ipv4/netfilter/ipt_ULOG.c @@ -231,8 +231,10 @@ static void ipt_ulog_packet(struct net *net, put_unaligned(tv.tv_usec, &pm->timestamp_usec); put_unaligned(skb->mark, &pm->mark); pm->hook = hooknum; - if (prefix != NULL) - strncpy(pm->prefix, prefix, sizeof(pm->prefix)); + if (prefix != NULL) { + strncpy(pm->prefix, prefix, sizeof(pm->prefix) - 1); + pm->prefix[sizeof(pm->prefix) - 1] = '\0'; + } else if (loginfo->prefix[0] != '\0') strncpy(pm->prefix, loginfo->prefix, sizeof(pm->prefix)); else From d47333ddb234dbc661ab2a4fe019758bd33ba33b Mon Sep 17 00:00:00 2001 From: Torsten Schenk Date: Thu, 23 May 2013 13:38:29 +0200 Subject: [PATCH 069/429] ALSA: usb-6fire: Modify firmware version check Check only the uppermost 16 bits instead of the whole 32 bits of the version information. Do this because all firmware version tested with this version information worked correctly and the strict check causes problems for several users. Signed-off-by: Torsten Schenk Signed-off-by: Takashi Iwai --- sound/usb/6fire/firmware.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c index a1d9b0792a1e..b9defcdeb7ef 100644 --- a/sound/usb/6fire/firmware.c +++ b/sound/usb/6fire/firmware.c @@ -42,8 +42,8 @@ static const u8 ep_w_max_packet_size[] = { 0x94, 0x01, 0x5c, 0x02 /* alt 3: 404 EP2 and 604 EP6 (25 fpp) */ }; -static const u8 known_fw_versions[][4] = { - { 0x03, 0x01, 0x0b, 0x00 } +static const u8 known_fw_versions[][2] = { + { 0x03, 0x01 } }; struct ihex_record { @@ -343,7 +343,7 @@ static int usb6fire_fw_check(u8 *version) int i; for (i = 0; i < ARRAY_SIZE(known_fw_versions); i++) - if (!memcmp(version, known_fw_versions + i, 4)) + if (!memcmp(version, known_fw_versions + i, 2)) return 0; snd_printk(KERN_ERR PREFIX "invalid fimware version in device: %*ph. " From a9a6e7a09598013ff97e34ebd84c39d1f51f261a Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Thu, 23 May 2013 14:31:23 +0000 Subject: [PATCH 070/429] MIPS: Trap exception handling fixes 2a0b24f56c2492b932f1aed617ae80fb23500d21 broke Trap exception handling in the standard MIPS mode. Additionally the microMIPS-mode trap code mask is wrong, as it's a 4-bit field. Here's a fix. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5309/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index e3be67012d78..a75ae40184aa 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -897,22 +897,24 @@ out_sigsegv: asmlinkage void do_tr(struct pt_regs *regs) { - unsigned int opcode, tcode = 0; + u32 opcode, tcode = 0; u16 instr[2]; - unsigned long epc = exception_epc(regs); + unsigned long epc = msk_isa16_mode(exception_epc(regs)); - if ((__get_user(instr[0], (u16 __user *)msk_isa16_mode(epc))) || - (__get_user(instr[1], (u16 __user *)msk_isa16_mode(epc + 2)))) + if (get_isa16_mode(regs->cp0_epc)) { + if (__get_user(instr[0], (u16 __user *)(epc + 0)) || + __get_user(instr[1], (u16 __user *)(epc + 2))) goto out_sigsegv; - opcode = (instr[0] << 16) | instr[1]; - - /* Immediate versions don't provide a code. */ - if (!(opcode & OPCODE)) { - if (get_isa16_mode(regs->cp0_epc)) - /* microMIPS */ - tcode = (opcode >> 12) & 0x1f; - else - tcode = ((opcode >> 6) & ((1 << 10) - 1)); + opcode = (instr[0] << 16) | instr[1]; + /* Immediate versions don't provide a code. */ + if (!(opcode & OPCODE)) + tcode = (opcode >> 12) & ((1 << 4) - 1); + } else { + if (__get_user(opcode, (u32 __user *)epc)) + goto out_sigsegv; + /* Immediate versions don't provide a code. */ + if (!(opcode & OPCODE)) + tcode = (opcode >> 6) & ((1 << 10) - 1); } do_trap_or_bp(regs, tcode, "Trap"); From ca1643186d3dce6171d8f171e516b02496360a9e Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Thu, 23 May 2013 11:51:10 -0400 Subject: [PATCH 071/429] tracing: Fix crash when ftrace=nop on the kernel command line If ftrace= is on the kernel command line, when that tracer is registered, it will be initiated by tracing_set_tracer() to execute that tracer. The nop tracer is just a stub tracer that is used to have no tracer enabled. It is assigned at early bootup as it is the default tracer. But if ftrace=nop is on the kernel command line, the registering of the nop tracer will call tracing_set_tracer() which will try to execute the nop tracer. But it expects tr->current_trace to be assigned something as it usually is assigned to the nop tracer. As it hasn't been assigned to anything yet, it causes the system to crash. The simple fix is to move the tr->current_trace = nop before registering the nop tracer. The functionality is still the same as the nop tracer doesn't do anything anyway. Reported-by: Peter Zijlstra Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index ae6fa2d1cdf7..4d79485b3237 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -6216,10 +6216,15 @@ __init static int tracer_alloc_buffers(void) trace_init_cmdlines(); - register_tracer(&nop_trace); - + /* + * register_tracer() might reference current_trace, so it + * needs to be set before we register anything. This is + * just a bootstrap of current_trace anyway. + */ global_trace.current_trace = &nop_trace; + register_tracer(&nop_trace); + /* All seems OK, enable tracing */ tracing_disabled = 0; From c815797663b72e3ac1736f1886538152bc48e4af Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 May 2013 18:10:21 +0200 Subject: [PATCH 072/429] cfg80211: check wdev->netdev in connection work If a P2P-Device is present and another virtual interface triggers the connection work, the system crash because it tries to check if the P2P-Device's netdev (which doesn't exist) is up. Skip any wdevs that have no netdev to fix this. Cc: stable@vger.kernel.org Reported-by: YanBo Signed-off-by: Johannes Berg --- net/wireless/sme.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/wireless/sme.c b/net/wireless/sme.c index 8b5eddfba1e5..3ed35c345cae 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -231,6 +231,9 @@ void cfg80211_conn_work(struct work_struct *work) mutex_lock(&rdev->sched_scan_mtx); list_for_each_entry(wdev, &rdev->wdev_list, list) { + if (!wdev->netdev) + continue; + wdev_lock(wdev); if (!netif_running(wdev->netdev)) { wdev_unlock(wdev); From 2b436312f0919c05804fed5aa4b7f255db196e7a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 May 2013 21:04:38 +0200 Subject: [PATCH 073/429] mac80211: fix queue handling crash The code I added in "mac80211: don't start new netdev queues if driver stopped" crashes for monitor and AP VLAN interfaces because while they have a netdev, they don't have queues set up by the driver. To fix the crash, exclude these from queue accounting here and just start their netdev queues unconditionally. For monitor, this is the best we can do, as we can redirect frames there to any other interface and don't know which one that will since it can be different for each frame. For AP VLAN interfaces, we can do better later and actually properly track the queue status. Not doing this is really a separate bug though. Reported-by: Ilan Peer Reported-by: Jouni Malinen Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 60f1ce5e5e52..68f51c3af49f 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -653,7 +653,11 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) ieee80211_recalc_ps(local, -1); - if (dev) { + if (sdata->vif.type == NL80211_IFTYPE_MONITOR || + sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { + /* XXX: for AP_VLAN, actually track AP queues */ + netif_tx_start_all_queues(dev); + } else if (dev) { unsigned long flags; int n_acs = IEEE80211_NUM_ACS; int ac; From 4325d724cd91643c727ca4cb063e8bb19989950b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 23 May 2013 15:05:59 +0200 Subject: [PATCH 074/429] cfg80211: fix reporting 64-bit station info tx bytes Copy & paste mistake - STATION_INFO_TX_BYTES64 is the name of the flag, not NL80211_STA_INFO_TX_BYTES64. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index dfdb5e643211..d5aed3bb3945 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3411,7 +3411,7 @@ static int nl80211_send_station(struct sk_buff *msg, u32 portid, u32 seq, (u32)sinfo->rx_bytes)) goto nla_put_failure; if ((sinfo->filled & (STATION_INFO_TX_BYTES | - NL80211_STA_INFO_TX_BYTES64)) && + STATION_INFO_TX_BYTES64)) && nla_put_u32(msg, NL80211_STA_INFO_TX_BYTES, (u32)sinfo->tx_bytes)) goto nla_put_failure; From 7805d000db30a3787a4c969bab6ae4d8a5fd8ce6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 24 May 2013 10:50:24 +0900 Subject: [PATCH 075/429] cgroup: fix a subtle bug in descendant pre-order walk When cgroup_next_descendant_pre() initiates a walk, it checks whether the subtree root doesn't have any children and if not returns NULL. Later code assumes that the subtree isn't empty. This is broken because the subtree may become empty inbetween, which can lead to the traversal escaping the subtree by walking to the sibling of the subtree root. There's no reason to have the early exit path. Remove it along with the later assumption that the subtree isn't empty. This simplifies the code a bit and fixes the subtle bug. While at it, fix the comment of cgroup_for_each_descendant_pre() which was incorrectly referring to ->css_offline() instead of ->css_online(). Signed-off-by: Tejun Heo Reviewed-by: Michal Hocko Cc: stable@vger.kernel.org --- include/linux/cgroup.h | 2 +- kernel/cgroup.c | 9 +++------ 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 5047355b9a0f..8bda1294c035 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -707,7 +707,7 @@ struct cgroup *cgroup_rightmost_descendant(struct cgroup *pos); * * If a subsystem synchronizes against the parent in its ->css_online() and * before starting iterating, and synchronizes against @pos on each - * iteration, any descendant cgroup which finished ->css_offline() is + * iteration, any descendant cgroup which finished ->css_online() is * guaranteed to be visible in the future iterations. * * In other words, the following guarantees that a descendant can't escape diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 38b136553044..31e9ef319070 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2954,11 +2954,8 @@ struct cgroup *cgroup_next_descendant_pre(struct cgroup *pos, WARN_ON_ONCE(!rcu_read_lock_held()); /* if first iteration, pretend we just visited @cgroup */ - if (!pos) { - if (list_empty(&cgroup->children)) - return NULL; + if (!pos) pos = cgroup; - } /* visit the first child if exists */ next = list_first_or_null_rcu(&pos->children, struct cgroup, sibling); @@ -2966,14 +2963,14 @@ struct cgroup *cgroup_next_descendant_pre(struct cgroup *pos, return next; /* no child, visit my or the closest ancestor's next sibling */ - do { + while (pos != cgroup) { next = list_entry_rcu(pos->sibling.next, struct cgroup, sibling); if (&next->sibling != &pos->parent->children) return next; pos = pos->parent; - } while (pos != cgroup); + } return NULL; } From 37523dc5ec2fead0eb5235fd9334f0419013a1f2 Mon Sep 17 00:00:00 2001 From: Jonas Andersson Date: Thu, 23 May 2013 13:38:05 +0200 Subject: [PATCH 076/429] ARM: dts: imx: fix clocks for cspi The CSPI controller has only one clock, but the driver spi-imx.c needs clock "per" to calculate bitrate divisor. Signed-off-by: Jonas Andersson Acked-by: Sascha Hauer Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx25.dtsi | 12 ++++++------ arch/arm/boot/dts/imx27.dtsi | 6 +++--- arch/arm/boot/dts/imx51.dtsi | 2 +- arch/arm/boot/dts/imx53.dtsi | 2 +- 4 files changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index d2550e0bca24..701153992c69 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -141,8 +141,8 @@ #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x43fa4000 0x4000>; - clocks = <&clks 62>; - clock-names = "ipg"; + clocks = <&clks 62>, <&clks 62>; + clock-names = "ipg", "per"; interrupts = <14>; status = "disabled"; }; @@ -182,8 +182,8 @@ compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x50004000 0x4000>; interrupts = <0>; - clocks = <&clks 80>; - clock-names = "ipg"; + clocks = <&clks 80>, <&clks 80>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -210,8 +210,8 @@ #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x50010000 0x4000>; - clocks = <&clks 79>; - clock-names = "ipg"; + clocks = <&clks 79>, <&clks 79>; + clock-names = "ipg", "per"; interrupts = <13>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index ff4bd4873edf..75bd11386516 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -131,7 +131,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000e000 0x1000>; interrupts = <16>; - clocks = <&clks 53>, <&clks 0>; + clocks = <&clks 53>, <&clks 53>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -142,7 +142,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000f000 0x1000>; interrupts = <15>; - clocks = <&clks 52>, <&clks 0>; + clocks = <&clks 52>, <&clks 52>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -223,7 +223,7 @@ compatible = "fsl,imx27-cspi"; reg = <0x10017000 0x1000>; interrupts = <6>; - clocks = <&clks 51>, <&clks 0>; + clocks = <&clks 51>, <&clks 51>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 21bb786c5b31..53fdde69bbf4 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -631,7 +631,7 @@ compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; reg = <0x83fc0000 0x4000>; interrupts = <38>; - clocks = <&clks 55>, <&clks 0>; + clocks = <&clks 55>, <&clks 55>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 845982eaac22..eb83aa039b8b 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -714,7 +714,7 @@ compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; reg = <0x63fc0000 0x4000>; interrupts = <38>; - clocks = <&clks 55>, <&clks 0>; + clocks = <&clks 55>, <&clks 55>; clock-names = "ipg", "per"; status = "disabled"; }; From 331de00a64e5027365145bdf51da27b9ce15dfd5 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Thu, 4 Apr 2013 10:32:13 -0700 Subject: [PATCH 077/429] xhci-mem: init list heads at the beginning of init It is possible that we fail on xhci_mem_init, just before doing the INIT_LIST_HEAD, and calling xhci_mem_cleanup. Problem is that, the list_for_each_entry_safe macro, assumes list heads are initialized (not NULL), and dereferences their 'next' pointer, causing a kernel panic if this is not yet initialized. Let's protect from that by moving inits to the beginning. This patch should be backported to kernels as old as 3.2, that contain the commit 9574323c39d1f8359a04843075d89c9f32d8b7e6 "xHCI: test USB2 software LPM". Signed-off-by: Sergio Aguirre Acked-by: David Cohen Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-mem.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 2cfc465925bd..bda2c51a7c74 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -2256,6 +2256,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) u32 page_size, temp; int i; + INIT_LIST_HEAD(&xhci->lpm_failed_devs); + INIT_LIST_HEAD(&xhci->cancel_cmd_list); + page_size = xhci_readl(xhci, &xhci->op_regs->page_size); xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size); for (i = 0; i < 16; i++) { @@ -2334,7 +2337,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags); if (!xhci->cmd_ring) goto fail; - INIT_LIST_HEAD(&xhci->cancel_cmd_list); xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring); xhci_dbg(xhci, "First segment DMA is 0x%llx\n", (unsigned long long)xhci->cmd_ring->first_seg->dma); @@ -2445,8 +2447,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) if (xhci_setup_port_arrays(xhci, flags)) goto fail; - INIT_LIST_HEAD(&xhci->lpm_failed_devs); - /* Enable USB 3.0 device notifications for function remote wake, which * is necessary for allowing USB 3.0 devices to do remote wakeup from * U3 (device suspend). From 88696ae432ce7321540ac53d9caab3de9118b094 Mon Sep 17 00:00:00 2001 From: Vladimir Murzin Date: Tue, 9 Apr 2013 22:33:31 +0400 Subject: [PATCH 078/429] xhci: fix list access before init If for whatever reason we fall into fail path in xhci_mem_init() before bw table gets initialized we may access the uninitialized lists in xhci_mem_cleanup(). Check for bw table before traversing lists in cleanup routine. This patch should be backported to kernels as old as 3.2, that contain the commit 839c817ce67178ca3c7c7ad534c571bba1e69ebe "xhci: Store information about roothubs and TTs." Reported-by: Sergey Dyasly Tested-by: Sergey Dyasly Signed-off-by: Vladimir Murzin Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-mem.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index bda2c51a7c74..fbf75e57628b 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1827,6 +1827,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } spin_unlock_irqrestore(&xhci->lock, flags); + if (!xhci->rh_bw) + goto no_bw; + num_ports = HCS_MAX_PORTS(xhci->hcs_params1); for (i = 0; i < num_ports; i++) { struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table; @@ -1845,6 +1848,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } } +no_bw: xhci->num_usb2_ports = 0; xhci->num_usb3_ports = 0; xhci->num_active_eps = 0; From 726dcaa158b316f02f7dec2cf6dbf61c30a8bf22 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 20 May 2013 08:12:57 +0100 Subject: [PATCH 079/429] arm64: kernel: compiling issue, need 'EXPORT_SYMBOL(clear_page)' Need 'EXPORT_SYMBOL(clear_page)' if building with allmodconfig. The related errors: ERROR: "clear_page" [fs/ocfs2/dlm/ocfs2_dlm.ko] undefined! ERROR: "clear_page" [fs/ntfs/ntfs.ko] undefined! ERROR: "clear_page" [fs/gfs2/gfs2.ko] undefined! ERROR: "clear_page" [fs/fuse/fuse.ko] undefined! ERROR: "clear_page" [fs/ext3/ext3.ko] undefined! ERROR: "clear_page" [fs/ext2/ext2.ko] undefined! ERROR: "clear_page" [fs/exofs/libore.ko] undefined! ERROR: "clear_page" [fs/exofs/exofs.ko] undefined! ERROR: "clear_page" [drivers/block/brd.ko] undefined! Signed-off-by: Chen Gang Signed-off-by: Catalin Marinas --- arch/arm64/kernel/arm64ksyms.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/kernel/arm64ksyms.c b/arch/arm64/kernel/arm64ksyms.c index 7df1aad29b67..41b4f626d554 100644 --- a/arch/arm64/kernel/arm64ksyms.c +++ b/arch/arm64/kernel/arm64ksyms.c @@ -34,6 +34,7 @@ EXPORT_SYMBOL(__strnlen_user); EXPORT_SYMBOL(__strncpy_from_user); EXPORT_SYMBOL(copy_page); +EXPORT_SYMBOL(clear_page); EXPORT_SYMBOL(__copy_from_user); EXPORT_SYMBOL(__copy_to_user); From 953dbbed9ee310100bc841cdea8f992d192531c6 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 21 May 2013 12:16:56 +0100 Subject: [PATCH 080/429] arm64: Do not report user faults for handled signals Currently user faults (page, undefined instruction) are always reported even though the user may have a signal handler for them. This patch adds unhandled_signal() check together with printk_ratelimit() for these cases. Signed-off-by: Catalin Marinas --- arch/arm64/kernel/traps.c | 5 +++-- arch/arm64/mm/fault.c | 3 ++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 61d7dd29f756..f1ff9bad00f7 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -267,7 +267,8 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) return; #endif - if (show_unhandled_signals) { + if (show_unhandled_signals && unhandled_signal(current, SIGILL) && + printk_ratelimit()) { pr_info("%s[%d]: undefined instruction: pc=%p\n", current->comm, task_pid_nr(current), pc); dump_instr(KERN_INFO, regs); @@ -294,7 +295,7 @@ asmlinkage long do_ni_syscall(struct pt_regs *regs) } #endif - if (show_unhandled_signals) { + if (show_unhandled_signals && printk_ratelimit()) { pr_info("%s[%d]: syscall %d\n", current->comm, task_pid_nr(current), (int)regs->syscallno); dump_instr("", regs); diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 98af6e760cce..1426468b77f3 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -113,7 +113,8 @@ static void __do_user_fault(struct task_struct *tsk, unsigned long addr, { struct siginfo si; - if (show_unhandled_signals) { + if (show_unhandled_signals && unhandled_signal(tsk, sig) && + printk_ratelimit()) { pr_info("%s[%d]: unhandled %s (%d) at 0x%08lx, esr 0x%03x\n", tsk->comm, task_pid_nr(tsk), fault_name(esr), sig, addr, esr); From 23dd9b2a43698df12f7951e0e5a5fbffd0b3108a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 23 May 2013 12:20:54 +0200 Subject: [PATCH 081/429] ath9k_hw: fix spur mitigation issues on AR934x Do not subtract spur power from noise floor on this chip, as it can lead to packet loss and other connectivity issues. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 2bf6548dd143..e1714d7c9eeb 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -334,7 +334,8 @@ static void ar9003_hw_spur_ofdm(struct ath_hw *ah, REG_RMW_FIELD(ah, AR_PHY_SPUR_REG, AR_PHY_SPUR_REG_EN_VIT_SPUR_RSSI, 1); - if (REG_READ_FIELD(ah, AR_PHY_MODE, + if (!AR_SREV_9340(ah) && + REG_READ_FIELD(ah, AR_PHY_MODE, AR_PHY_MODE_DYNAMIC) == 0x1) REG_RMW_FIELD(ah, AR_PHY_SPUR_REG, AR_PHY_SPUR_REG_ENABLE_NF_RSSI_SPUR_MIT, 1); From a37a99102e4573145aa60a2f78a690cc8def027c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 23 May 2013 12:20:55 +0200 Subject: [PATCH 082/429] ath9k_hw: fix host interface reset on AR934x If a local bus timeout has been detected, the host interface needs to be reset to clear the errors. AR934x uses a different synchronous interrupt bit to indicate this, so the check needs to be fixed. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 10 +++++++--- drivers/net/wireless/ath/ath9k/reg.h | 2 ++ 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 7f25da8444fe..01e97ce438ba 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1306,9 +1306,13 @@ static bool ath9k_hw_set_reset(struct ath_hw *ah, int type) AR_RTC_RC_COLD_RESET | AR_RTC_RC_WARM_RESET; } else { tmpReg = REG_READ(ah, AR_INTR_SYNC_CAUSE); - if (tmpReg & - (AR_INTR_SYNC_LOCAL_TIMEOUT | - AR_INTR_SYNC_RADM_CPL_TIMEOUT)) { + if (AR_SREV_9340(ah)) + tmpReg &= AR9340_INTR_SYNC_LOCAL_TIMEOUT; + else + tmpReg &= AR_INTR_SYNC_LOCAL_TIMEOUT | + AR_INTR_SYNC_RADM_CPL_TIMEOUT; + + if (tmpReg) { u32 val; REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0); diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 5c4ab5026dca..9c056a80b85d 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -1007,6 +1007,8 @@ enum { AR_INTR_SYNC_LOCAL_TIMEOUT | AR_INTR_SYNC_MAC_SLEEP_ACCESS), + AR9340_INTR_SYNC_LOCAL_TIMEOUT = 0x00000010, + AR_INTR_SYNC_SPURIOUS = 0xFFFFFFFF, }; From 86c157b3f83597e11d8f03a9dece98d1e77a8ce7 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 23 May 2013 12:20:56 +0200 Subject: [PATCH 083/429] ath9k_hw: improve performance for AR934x v1.3+ AR934x v1.3 no longer needs the DCU backoff reduction workaround for preventing rx overruns, but in turn needs the number of usable Tx buffers to be reduced slightly. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 15 ++++++++++----- drivers/net/wireless/ath/ath9k/mac.c | 2 +- drivers/net/wireless/ath/ath9k/reg.h | 9 +++++++++ 3 files changed, 20 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 01e97ce438ba..15dfefcf2d0f 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1172,6 +1172,7 @@ u32 ath9k_regd_get_ctl(struct ath_regulatory *reg, struct ath9k_channel *chan) static inline void ath9k_hw_set_dma(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); + int txbuf_size; ENABLE_REGWRITE_BUFFER(ah); @@ -1225,13 +1226,17 @@ static inline void ath9k_hw_set_dma(struct ath_hw *ah) * So set the usable tx buf size also to half to * avoid data/delimiter underruns */ - REG_WRITE(ah, AR_PCU_TXBUF_CTRL, - AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE); - } else if (!AR_SREV_9271(ah)) { - REG_WRITE(ah, AR_PCU_TXBUF_CTRL, - AR_PCU_TXBUF_CTRL_USABLE_SIZE); + txbuf_size = AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE; + } else if (AR_SREV_9340_13_OR_LATER(ah)) { + /* Uses fewer entries for AR934x v1.3+ to prevent rx overruns */ + txbuf_size = AR_9340_PCU_TXBUF_CTRL_USABLE_SIZE; + } else { + txbuf_size = AR_PCU_TXBUF_CTRL_USABLE_SIZE; } + if (!AR_SREV_9271(ah)) + REG_WRITE(ah, AR_PCU_TXBUF_CTRL, txbuf_size); + REGWRITE_BUFFER_FLUSH(ah); if (AR_SREV_9300_20_OR_LATER(ah)) diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 498fee04afa0..566109a40fb3 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -410,7 +410,7 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q) REG_WRITE(ah, AR_QMISC(q), AR_Q_MISC_DCU_EARLY_TERM_REQ); - if (AR_SREV_9340(ah)) + if (AR_SREV_9340(ah) && !AR_SREV_9340_13_OR_LATER(ah)) REG_WRITE(ah, AR_DMISC(q), AR_D_MISC_CW_BKOFF_EN | AR_D_MISC_FRAG_WAIT_EN | 0x1); else diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 9c056a80b85d..f7c90cc58d56 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -798,6 +798,10 @@ #define AR_SREV_REVISION_9485_10 0 #define AR_SREV_REVISION_9485_11 1 #define AR_SREV_VERSION_9340 0x300 +#define AR_SREV_REVISION_9340_10 0 +#define AR_SREV_REVISION_9340_11 1 +#define AR_SREV_REVISION_9340_12 2 +#define AR_SREV_REVISION_9340_13 3 #define AR_SREV_VERSION_9580 0x1C0 #define AR_SREV_REVISION_9580_10 4 /* AR9580 1.0 */ #define AR_SREV_VERSION_9462 0x280 @@ -897,6 +901,10 @@ #define AR_SREV_9340(_ah) \ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9340)) +#define AR_SREV_9340_13_OR_LATER(_ah) \ + (AR_SREV_9340((_ah)) && \ + ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9340_13)) + #define AR_SREV_9285E_20(_ah) \ (AR_SREV_9285_12_OR_LATER(_ah) && \ ((REG_READ(_ah, AR_AN_SYNTH9) & 0x7) == 0x1)) @@ -1883,6 +1891,7 @@ enum { #define AR_PCU_TXBUF_CTRL_SIZE_MASK 0x7FF #define AR_PCU_TXBUF_CTRL_USABLE_SIZE 0x700 #define AR_9285_PCU_TXBUF_CTRL_USABLE_SIZE 0x380 +#define AR_9340_PCU_TXBUF_CTRL_USABLE_SIZE 0x500 #define AR_PCU_MISC_MODE2 0x8344 #define AR_PCU_MISC_MODE2_MGMT_CRYPTO_ENABLE 0x00000002 From 62106e96279f66c52e2123782f9420af9dbe8cbe Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 7 May 2013 11:28:31 -0400 Subject: [PATCH 084/429] cifs: only set ops for inodes in I_NEW state It's generally not safe to reset the inode ops once they've been set. In the case where the inode was originally thought to be a directory and then later found to be a DFS referral, this can lead to an oops when we try to trigger an inode op on it after changing the ops to the blank referral operations. Cc: Reported-and-Tested-by: Sachin Prabhu Signed-off-by: Jeff Layton Signed-off-by: Steve French Signed-off-by: Steve French --- fs/cifs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index fc3025199cb3..20efd81266c6 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -171,7 +171,8 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr) if (fattr->cf_flags & CIFS_FATTR_DFS_REFERRAL) inode->i_flags |= S_AUTOMOUNT; - cifs_set_ops(inode); + if (inode->i_state & I_NEW) + cifs_set_ops(inode); } void From 166faf21bd14bc5c5295a44874bf7f3930c30b20 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:04 -0400 Subject: [PATCH 085/429] cifs: fix potential buffer overrun when composing a new options string Consider the case where we have a very short ip= string in the original mount options, and when we chase a referral we end up with a very long IPv6 address. Be sure to allow for that possibility when estimating the size of the string to allocate. Cc: Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_dfs_ref.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index 8e33ec65847b..8e5a1817496d 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "cifsglob.h" #include "cifsproto.h" #include "cifsfs.h" @@ -150,7 +151,8 @@ char *cifs_compose_mount_options(const char *sb_mountdata, * assuming that we have 'unc=' and 'ip=' in * the original sb_mountdata */ - md_len = strlen(sb_mountdata) + rc + strlen(ref->node_name) + 12; + md_len = strlen(sb_mountdata) + rc + strlen(ref->node_name) + 12 + + INET6_ADDRSTRLEN; mountdata = kzalloc(md_len+1, GFP_KERNEL); if (mountdata == NULL) { rc = -ENOMEM; From 539673fff76af73c3aee96e0de10edcc97d84db3 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:04 -0400 Subject: [PATCH 086/429] cifs: allow sec=none mounts to work against servers that don't support extended security In the case of sec=none, we're not sending a username or password, so there's little benefit to mandating NTLMSSP auth. Allow it to use unencapsulated auth in that case. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 99eeaa17ee00..0a7fdc31f253 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1061,6 +1061,7 @@ static int cifs_parse_security_flavors(char *value, #endif case Opt_sec_none: vol->nullauth = 1; + vol->secFlg |= CIFSSEC_MAY_NTLM; break; default: cifs_dbg(VFS, "bad security option: %s\n", value); From 37d4f99b55d46d9f71f4769faf74c95adb2c1daf Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:05 -0400 Subject: [PATCH 087/429] cifs: fix error handling when calling cifs_parse_devname When we allowed separate unc= and prefixpath= mount options, we could ignore EINVAL errors from cifs_parse_devname. Now that they are deprecated, we need to check for that as well and fail the mount if it's malformed. Also fix a later error message that refers to the unc= option. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 0a7fdc31f253..5b97e56ddbca 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1258,14 +1258,18 @@ cifs_parse_mount_options(const char *mountdata, const char *devname, vol->backupuid_specified = false; /* no backup intent for a user */ vol->backupgid_specified = false; /* no backup intent for a group */ - /* - * For now, we ignore -EINVAL errors under the assumption that the - * unc= and prefixpath= options will be usable. - */ - if (cifs_parse_devname(devname, vol) == -ENOMEM) { - printk(KERN_ERR "CIFS: Unable to allocate memory to parse " - "device string.\n"); - goto out_nomem; + switch (cifs_parse_devname(devname, vol)) { + case 0: + break; + case -ENOMEM: + cifs_dbg(VFS, "Unable to allocate memory for devname.\n"); + goto cifs_parse_mount_err; + case -EINVAL: + cifs_dbg(VFS, "Malformed UNC in devname.\n"); + goto cifs_parse_mount_err; + default: + cifs_dbg(VFS, "Unknown error parsing devname.\n"); + goto cifs_parse_mount_err; } while ((data = strsep(&options, separator)) != NULL) { @@ -1827,7 +1831,7 @@ cifs_parse_mount_options(const char *mountdata, const char *devname, } #endif if (!vol->UNC) { - cifs_dbg(VFS, "CIFS mount error: No usable UNC path provided in device string or in unc= option!\n"); + cifs_dbg(VFS, "CIFS mount error: No usable UNC path provided in device string!\n"); goto cifs_parse_mount_err; } From 9c9c29e1af2ff0459087876e3800078555794b60 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:05 -0400 Subject: [PATCH 088/429] cifs: stop printing the unc= option in /proc/mounts Since we no longer recognize that option, stop printing it out. The devicename is now the canonical source for this info. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 72e4efee1389..3752b9f6d9e4 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -372,9 +372,6 @@ cifs_show_options(struct seq_file *s, struct dentry *root) cifs_show_security(s, tcon->ses->server); cifs_show_cache_flavor(s, cifs_sb); - seq_printf(s, ",unc="); - seq_escape(s, tcon->treeName, " \t\n\\"); - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MULTIUSER) seq_printf(s, ",multiuser"); else if (tcon->ses->user_name) From d9deef0a3f38bcc1c155e8d9a8b522404e5e648c Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 24 May 2013 07:40:06 -0400 Subject: [PATCH 089/429] cifs: fix composing of mount options for DFS referrals With the change to ignore the unc= and prefixpath= mount options, there is no longer any need to add them to the options string when mounting. By the same token, we now need to build a device name that includes the prefixpath when mounting. To make things neater, the delimiters on the devicename are changed to '/' since that's preferred when mounting anyway. v2: fix some comments and don't bother looking at whether there is a prepath in the ref->node_name when deciding whether to pass a prepath to cifs_build_devname. v3: rebase on top of potential buffer overrun fix for stable Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifs_dfs_ref.c | 141 +++++++++++++++++++++-------------------- fs/cifs/dns_resolve.c | 4 +- 2 files changed, 73 insertions(+), 72 deletions(-) diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index 8e5a1817496d..58df174deb10 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -49,58 +49,74 @@ void cifs_dfs_release_automount_timer(void) } /** - * cifs_get_share_name - extracts share name from UNC - * @node_name: pointer to UNC string + * cifs_build_devname - build a devicename from a UNC and optional prepath + * @nodename: pointer to UNC string + * @prepath: pointer to prefixpath (or NULL if there isn't one) * - * Extracts sharename form full UNC. - * i.e. strips from UNC trailing path that is not part of share - * name and fixup missing '\' in the beginning of DFS node refferal - * if necessary. - * Returns pointer to share name on success or ERR_PTR on error. - * Caller is responsible for freeing returned string. + * Build a new cifs devicename after chasing a DFS referral. Allocate a buffer + * big enough to hold the final thing. Copy the UNC from the nodename, and + * concatenate the prepath onto the end of it if there is one. + * + * Returns pointer to the built string, or a ERR_PTR. Caller is responsible + * for freeing the returned string. */ -static char *cifs_get_share_name(const char *node_name) +static char * +cifs_build_devname(char *nodename, const char *prepath) { - int len; - char *UNC; - char *pSep; + size_t pplen; + size_t unclen; + char *dev; + char *pos; - len = strlen(node_name); - UNC = kmalloc(len+2 /*for term null and additional \ if it's missed */, - GFP_KERNEL); - if (!UNC) + /* skip over any preceding delimiters */ + nodename += strspn(nodename, "\\"); + if (!*nodename) + return ERR_PTR(-EINVAL); + + /* get length of UNC and set pos to last char */ + unclen = strlen(nodename); + pos = nodename + unclen - 1; + + /* trim off any trailing delimiters */ + while (*pos == '\\') { + --pos; + --unclen; + } + + /* allocate a buffer: + * +2 for preceding "//" + * +1 for delimiter between UNC and prepath + * +1 for trailing NULL + */ + pplen = prepath ? strlen(prepath) : 0; + dev = kmalloc(2 + unclen + 1 + pplen + 1, GFP_KERNEL); + if (!dev) return ERR_PTR(-ENOMEM); - /* get share name and server name */ - if (node_name[1] != '\\') { - UNC[0] = '\\'; - strncpy(UNC+1, node_name, len); - len++; - UNC[len] = 0; - } else { - strncpy(UNC, node_name, len); - UNC[len] = 0; + pos = dev; + /* add the initial "//" */ + *pos = '/'; + ++pos; + *pos = '/'; + ++pos; + + /* copy in the UNC portion from referral */ + memcpy(pos, nodename, unclen); + pos += unclen; + + /* copy the prefixpath remainder (if there is one) */ + if (pplen) { + *pos = '/'; + ++pos; + memcpy(pos, prepath, pplen); + pos += pplen; } - /* find server name end */ - pSep = memchr(UNC+2, '\\', len-2); - if (!pSep) { - cifs_dbg(VFS, "%s: no server name end in node name: %s\n", - __func__, node_name); - kfree(UNC); - return ERR_PTR(-EINVAL); - } + /* NULL terminator */ + *pos = '\0'; - /* find sharename end */ - pSep++; - pSep = memchr(UNC+(pSep-UNC), '\\', len-(pSep-UNC)); - if (pSep) { - /* trim path up to sharename end - * now we have share name in UNC */ - *pSep = 0; - } - - return UNC; + convert_delimiter(dev, '/'); + return dev; } @@ -124,6 +140,7 @@ char *cifs_compose_mount_options(const char *sb_mountdata, { int rc; char *mountdata = NULL; + const char *prepath = NULL; int md_len; char *tkn_e; char *srvIP = NULL; @@ -133,7 +150,10 @@ char *cifs_compose_mount_options(const char *sb_mountdata, if (sb_mountdata == NULL) return ERR_PTR(-EINVAL); - *devname = cifs_get_share_name(ref->node_name); + if (strlen(fullpath) - ref->path_consumed) + prepath = fullpath + ref->path_consumed; + + *devname = cifs_build_devname(ref->node_name, prepath); if (IS_ERR(*devname)) { rc = PTR_ERR(*devname); *devname = NULL; @@ -147,13 +167,14 @@ char *cifs_compose_mount_options(const char *sb_mountdata, goto compose_mount_options_err; } - /* md_len = strlen(...) + 12 for 'sep+prefixpath=' - * assuming that we have 'unc=' and 'ip=' in - * the original sb_mountdata + /* + * In most cases, we'll be building a shorter string than the original, + * but we do have to assume that the address in the ip= option may be + * much longer than the original. Add the max length of an address + * string to the length of the original string to allow for worst case. */ - md_len = strlen(sb_mountdata) + rc + strlen(ref->node_name) + 12 + - INET6_ADDRSTRLEN; - mountdata = kzalloc(md_len+1, GFP_KERNEL); + md_len = strlen(sb_mountdata) + INET6_ADDRSTRLEN; + mountdata = kzalloc(md_len + 1, GFP_KERNEL); if (mountdata == NULL) { rc = -ENOMEM; goto compose_mount_options_err; @@ -197,26 +218,6 @@ char *cifs_compose_mount_options(const char *sb_mountdata, strncat(mountdata, &sep, 1); strcat(mountdata, "ip="); strcat(mountdata, srvIP); - strncat(mountdata, &sep, 1); - strcat(mountdata, "unc="); - strcat(mountdata, *devname); - - /* find & copy prefixpath */ - tkn_e = strchr(ref->node_name + 2, '\\'); - if (tkn_e == NULL) { - /* invalid unc, missing share name*/ - rc = -EINVAL; - goto compose_mount_options_err; - } - - tkn_e = strchr(tkn_e + 1, '\\'); - if (tkn_e || (strlen(fullpath) - ref->path_consumed)) { - strncat(mountdata, &sep, 1); - strcat(mountdata, "prefixpath="); - if (tkn_e) - strcat(mountdata, tkn_e + 1); - strcat(mountdata, fullpath + ref->path_consumed); - } /*cifs_dbg(FYI, "%s: parent mountdata: %s\n", __func__, sb_mountdata);*/ /*cifs_dbg(FYI, "%s: submount mountdata: %s\n", __func__, mountdata );*/ diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c index e7512e497611..7ede7306599f 100644 --- a/fs/cifs/dns_resolve.c +++ b/fs/cifs/dns_resolve.c @@ -34,7 +34,7 @@ /** * dns_resolve_server_name_to_ip - Resolve UNC server name to ip address. - * @unc: UNC path specifying the server + * @unc: UNC path specifying the server (with '/' as delimiter) * @ip_addr: Where to return the IP address. * * The IP address will be returned in string form, and the caller is @@ -64,7 +64,7 @@ dns_resolve_server_name_to_ip(const char *unc, char **ip_addr) hostname = unc + 2; /* Search for server name delimiter */ - sep = memchr(hostname, '\\', len); + sep = memchr(hostname, '/', len); if (sep) len = sep - hostname; else From e9b376671910d105c5e61103111b96209c729529 Mon Sep 17 00:00:00 2001 From: Vahram Martirosyan Date: Fri, 24 May 2013 13:57:12 +0500 Subject: [PATCH 090/429] jfs: Several bugs in jfs_freeze() and jfs_unfreeze() The mentioned functions do not pay attention to the error codes returned by the functions updateSuper(), lmLogInit() and lmLogShutdown(). It brings to system crash later when writing to log. The patch adds corresponding code to check and return the error codes and to print correct error messages in case of errors. Found by Linux File System Verification project (linuxtesting.org). Signed-off-by: Vahram Martirosyan Reviewed-by: Gu Zheng Signed-off-by: Dave Kleikamp --- fs/jfs/super.c | 38 ++++++++++++++++++++++++++++++-------- 1 file changed, 30 insertions(+), 8 deletions(-) diff --git a/fs/jfs/super.c b/fs/jfs/super.c index 2003e830ed1c..788e0a9c1fb0 100644 --- a/fs/jfs/super.c +++ b/fs/jfs/super.c @@ -611,11 +611,28 @@ static int jfs_freeze(struct super_block *sb) { struct jfs_sb_info *sbi = JFS_SBI(sb); struct jfs_log *log = sbi->log; + int rc = 0; if (!(sb->s_flags & MS_RDONLY)) { txQuiesce(sb); - lmLogShutdown(log); - updateSuper(sb, FM_CLEAN); + rc = lmLogShutdown(log); + if (rc) { + jfs_error(sb, "jfs_freeze: lmLogShutdown failed"); + + /* let operations fail rather than hang */ + txResume(sb); + + return rc; + } + rc = updateSuper(sb, FM_CLEAN); + if (rc) { + jfs_err("jfs_freeze: updateSuper failed\n"); + /* + * Don't fail here. Everything succeeded except + * marking the superblock clean, so there's really + * no harm in leaving it frozen for now. + */ + } } return 0; } @@ -627,13 +644,18 @@ static int jfs_unfreeze(struct super_block *sb) int rc = 0; if (!(sb->s_flags & MS_RDONLY)) { - updateSuper(sb, FM_MOUNT); - if ((rc = lmLogInit(log))) - jfs_err("jfs_unlock failed with return code %d", rc); - else - txResume(sb); + rc = updateSuper(sb, FM_MOUNT); + if (rc) { + jfs_error(sb, "jfs_unfreeze: updateSuper failed"); + goto out; + } + rc = lmLogInit(log); + if (rc) + jfs_error(sb, "jfs_unfreeze: lmLogInit failed"); +out: + txResume(sb); } - return 0; + return rc; } static struct dentry *jfs_do_mount(struct file_system_type *fs_type, From 95bbb82f60c80808e5a49d8233c2de8451901531 Mon Sep 17 00:00:00 2001 From: Gu Zheng Date: Thu, 23 May 2013 16:14:19 +0800 Subject: [PATCH 091/429] fs/jfs: Add check if journaling to disk has been disabled in lbmRead() Signed-off-by: Gu Zheng Signed-off-by: Dave Kleikamp --- fs/jfs/jfs_logmgr.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c index c57499dca89c..360d27c48887 100644 --- a/fs/jfs/jfs_logmgr.c +++ b/fs/jfs/jfs_logmgr.c @@ -2009,7 +2009,13 @@ static int lbmRead(struct jfs_log * log, int pn, struct lbuf ** bpp) bio->bi_end_io = lbmIODone; bio->bi_private = bp; - submit_bio(READ_SYNC, bio); + /*check if journaling to disk has been disabled*/ + if (log->no_integrity) { + bio->bi_size = 0; + lbmIODone(bio, 0); + } else { + submit_bio(READ_SYNC, bio); + } wait_event(bp->l_ioevent, (bp->l_flag != lbmREAD)); From 68a433f18c0574b50c5952978ca95b0db7347174 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Sat, 25 May 2013 06:27:29 +0900 Subject: [PATCH 092/429] ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC This patch extends exynos_init_time() function to handle Exynos4210 rev0 SoC, which differs in availability of system timers and needs different clocksource initialization. This makes it possible to use exynos_init_time() function as init_time callback for all Exynos-based boards, including Universal_C210, which originally had to use samsung_timer_init(). Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/Kconfig | 3 ++- arch/arm/mach-exynos/common.c | 30 +++++++++++++++++++++- arch/arm/mach-exynos/common.h | 2 ++ arch/arm/mach-exynos/mach-universal_c210.c | 5 ++-- 4 files changed, 35 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index d19edff0ea6e..ff18fc2ea46f 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -250,6 +250,7 @@ config MACH_ARMLEX4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CLKSRC_MMIO + select CLKSRC_SAMSUNG_PWM select CPU_EXYNOS4210 select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -281,7 +282,6 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_TV select S5P_GPIO_INT select S5P_SETUP_MIPIPHY - select SAMSUNG_HRT help Machine support for Samsung Mobile Universal S5PC210 Reference Board. @@ -410,6 +410,7 @@ config MACH_EXYNOS4_DT depends on ARCH_EXYNOS4 select ARM_AMBA select CLKSRC_OF + select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 select CPU_EXYNOS4210 select KEYBOARD_SAMSUNG if INPUT_KEYBOARD select PINCTRL diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 745e304ad0de..a2d20120e9fc 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -10,12 +10,14 @@ */ #include +#include #include #include #include #include #include #include +#include #include #include #include @@ -302,6 +304,13 @@ static struct map_desc exynos5440_iodesc0[] __initdata = { }, }; +static struct samsung_pwm_variant exynos4_pwm_variant = { + .bits = 32, + .div_base = 0, + .has_tint_cstat = true, + .tclk_mask = 0, +}; + void exynos4_restart(char mode, const char *cmd) { __raw_writel(0x1, S5P_SWRESET); @@ -442,8 +451,20 @@ static void __init exynos5440_map_io(void) iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0)); } +void __init exynos_set_timer_source(u8 channels) +{ + exynos4_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1; + exynos4_pwm_variant.output_mask &= ~channels; +} + void __init exynos_init_time(void) { + unsigned int timer_irqs[SAMSUNG_PWM_NUM] = { + EXYNOS4_IRQ_TIMER0_VIC, EXYNOS4_IRQ_TIMER1_VIC, + EXYNOS4_IRQ_TIMER2_VIC, EXYNOS4_IRQ_TIMER3_VIC, + EXYNOS4_IRQ_TIMER4_VIC, + }; + if (of_have_populated_dt()) { #ifdef CONFIG_OF of_clk_init(NULL); @@ -455,7 +476,14 @@ void __init exynos_init_time(void) exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1); exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f); #endif - mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); +#ifdef CONFIG_CLKSRC_SAMSUNG_PWM + if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0) + samsung_pwm_clocksource_init(S3C_VA_TIMER, + timer_irqs, &exynos4_pwm_variant); + else +#endif + mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0, + EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1); } } diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 60dd35cc01a6..11fc1e29819b 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -32,6 +32,8 @@ void exynos4_clk_register_fixed_ext(unsigned long, unsigned long); void exynos_firmware_init(void); +void exynos_set_timer_source(u8 channels); + #ifdef CONFIG_PM_GENERIC_DOMAINS int exynos_pm_late_initcall(void); #else diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 327d50d4681d..74ddb2b55614 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include @@ -1094,7 +1093,7 @@ static void __init universal_map_io(void) { exynos_init_io(NULL, 0); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); - samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4); + exynos_set_timer_source(BIT(2) | BIT(4)); xxti_f = 0; xusbxti_f = 24000000; } @@ -1154,7 +1153,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .map_io = universal_map_io, .init_machine = universal_machine_init, .init_late = exynos_init_late, - .init_time = samsung_timer_init, + .init_time = exynos_init_time, .reserve = &universal_reserve, .restart = exynos4_restart, MACHINE_END From 1ba830c9997214a7fbe4d91cf238793764620e3b Mon Sep 17 00:00:00 2001 From: Jungseok Lee Date: Sat, 25 May 2013 06:33:03 +0900 Subject: [PATCH 093/429] ARM: EXYNOS: fix software reset logic for EXYNOS5440 SOC This patch fixes software reset logic. Software reset applies only to powered-on domains in SOC because software reset to all domains causes reboot failure. Signed-off-by: Jungseok Lee Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/common.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index a2d20120e9fc..027c9e7f0d13 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -326,9 +326,16 @@ void exynos5_restart(char mode, const char *cmd) val = 0x1; addr = EXYNOS_SWRESET; } else if (of_machine_is_compatible("samsung,exynos5440")) { + u32 status; np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock"); + + addr = of_iomap(np, 0) + 0xbc; + status = __raw_readl(addr); + addr = of_iomap(np, 0) + 0xcc; - val = (0xfff << 20) | (0x1 << 16); + val = __raw_readl(addr); + + val = (val & 0xffff0000) | (status & 0xffff); } else { pr_err("%s: cannot support non-DT\n", __func__); return; From 15f504f0c2038b9a0f1569c9ce34def61f0c65be Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Sat, 25 May 2013 06:49:43 +0900 Subject: [PATCH 094/429] ARM: SAMSUNG: Add names to fimd0 IRQ resources Since commit 1977e6d8 (drm/exynos: change the method for getting the interrupt) the Exynos DRM FIMD driver requires IRQ resources to be named. This patch fixes probe failure in non-DT cases by adding appropriate resource names to fimd0 platform device. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/devs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 30c2fe243f76..0f9c3f431a5f 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -311,9 +311,9 @@ struct platform_device s5p_device_jpeg = { #ifdef CONFIG_S5P_DEV_FIMD0 static struct resource s5p_fimd0_resource[] = { [0] = DEFINE_RES_MEM(S5P_PA_FIMD0, SZ_32K), - [1] = DEFINE_RES_IRQ(IRQ_FIMD0_VSYNC), - [2] = DEFINE_RES_IRQ(IRQ_FIMD0_FIFO), - [3] = DEFINE_RES_IRQ(IRQ_FIMD0_SYSTEM), + [1] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_VSYNC, "vsync"), + [2] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_FIFO, "fifo"), + [3] = DEFINE_RES_IRQ_NAMED(IRQ_FIMD0_SYSTEM, "lcd_sys"), }; struct platform_device s5p_device_fimd0 = { From 77df9e0b799b03e1d5d9c68062709af5f637e834 Mon Sep 17 00:00:00 2001 From: Tony Camuso Date: Thu, 21 Feb 2013 16:11:27 -0500 Subject: [PATCH 095/429] xhci - correct comp_mode_recovery_timer on return from hibernate Commit 71c731a2 (usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware) was a workaround for systems using the SN65LVPE502CP, controller, but it introduced a bug in resume from hibernate. The fix created a timer, comp_mode_recovery_timer, which is deleted from a timer list when xhci_suspend() is called. However, the hibernate image, including the timer list containing the comp_mode_recovery_timer, had already been saved before the timer was deleted. Upon resume from hibernate, the list containing the comp_mode_recovery_timer is restored from the image saved to disk, and xhci_resume(), assuming that the timer had been deleted by xhci_suspend(), makes a call to compliance_mode_recoery_timer_init(), which creates a new instance of the comp_mode_recovery_timer and attempts to place it into the same list in which it is already active, thus corrupting the list during the list_add() call. At this point, a call trace is emitted indicating the list corruption. Soon afterward, the system locks up, the watchdog times out, and the ensuing NMI crashes the system. The problem did not occur when resuming from suspend. In suspend, the image in RAM remains exactly as it was when xhci_suspend() deleted the comp_mode_recovery_timer, so there is no problem when xhci_resume() creates a new instance of this timer and places it in the still empty list. This patch avoids the problem by deleting the timer in xhci_resume() when resuming from hibernate. Now xhci_resume() can safely make the call to create a new instance of this timer, whether returning from suspend or hibernate. Thanks to Alan Stern for his help with understanding the problem. [Sarah reworked this patch to cover the case where the xHCI restore register operation fails, and (temp & STS_SRE) is true (and we re-init the host, including re-init for the compliance mode), but hibernate is false. The original patch would have caused list corruption in this case.] This patch should be backported to kernels as old as 3.2, that contain the commit 71c731a296f1b08a3724bd1b514b64f1bda87a23 "usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware" Signed-off-by: Tony Camuso Tested-by: Tony Camuso Acked-by: Don Zickus Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b4aa79d154b2..ae59119ed087 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -956,6 +956,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) struct usb_hcd *hcd = xhci_to_hcd(xhci); struct usb_hcd *secondary_hcd; int retval = 0; + bool comp_timer_running = false; /* Wait a bit if either of the roothubs need to settle from the * transition into bus suspend. @@ -993,6 +994,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* If restore operation fails, re-initialize the HC during resume */ if ((temp & STS_SRE) || hibernated) { + + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + !(xhci_all_ports_seen_u0(xhci))) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n"); + } + /* Let the USB core know _both_ roothubs lost power. */ usb_root_hub_lost_power(xhci->main_hcd->self.root_hub); usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub); @@ -1035,6 +1043,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) retval = xhci_init(hcd->primary_hcd); if (retval) return retval; + comp_timer_running = true; + xhci_dbg(xhci, "Start the primary HCD\n"); retval = xhci_run(hcd->primary_hcd); if (!retval) { @@ -1076,7 +1086,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) * to suffer the Compliance Mode issue again. It doesn't matter if * ports have entered previously to U0 before system's suspension. */ - if (xhci->quirks & XHCI_COMP_MODE_QUIRK) + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running) compliance_mode_recovery_timer_init(xhci); /* Re-enable port polling. */ From c3897aa5386faba77e5bbdf94902a1658d3a5b11 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 18 Apr 2013 10:02:03 -0700 Subject: [PATCH 096/429] xhci: Disable D3cold for buggy TI redrivers. Some xHCI hosts contain a "redriver" from TI that silently drops port status connect changes if the port slips into Compliance Mode. If the port slips into compliance mode while the host is in D0, there will not be a port status change event. If the port slips into compliance mode while the host is in D3, the host will not send a PME. This includes when the system is suspended (S3) or hibernated (S4). If this happens when the system is in S3/S4, there is nothing software can do. Other port status change events that would normally cause the host to wake the system from S3/S4 may also be lost. This includes remote wakeup, disconnects and connects on other ports, and overrcurrent events. A decision was made to _NOT_ disable system suspend/hibernate on these systems, since users are unlikely to enable wakeup from S3/S4 for the xHCI host. Software can deal with this issue when the system is in S0. A work around was put in to poll the port status registers for Compliance Mode. The xHCI driver will continue to poll the registers while the host is runtime suspended. Unfortunately, that means we can't allow the PCI device to go into D3cold, because power will be removed from the host, and the config space will read as all Fs. Disable D3cold in the xHCI PCI runtime suspend function. This patch should be backported to kernels as old as 3.2, that contain the commit 71c731a296f1b08a3724bd1b514b64f1bda87a23 "usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware" Signed-off-by: Sarah Sharp Cc: Huang Ying Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-pci.c | 8 ++++++++ drivers/usb/host/xhci.c | 4 ++-- drivers/usb/host/xhci.h | 3 +++ 3 files changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 1a30c380043c..cc24e39b97d5 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -221,6 +221,14 @@ static void xhci_pci_remove(struct pci_dev *dev) static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + + /* + * Systems with the TI redriver that loses port status change events + * need to have the registers polled during D3, so avoid D3cold. + */ + if (xhci_compliance_mode_recovery_timer_quirk_check()) + pdev->no_d3cold = true; return xhci_suspend(xhci); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index ae59119ed087..d8f640b12dd9 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -466,7 +466,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci) * Systems: * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820 */ -static bool compliance_mode_recovery_timer_quirk_check(void) +bool xhci_compliance_mode_recovery_timer_quirk_check(void) { const char *dmi_product_name, *dmi_sys_vendor; @@ -517,7 +517,7 @@ int xhci_init(struct usb_hcd *hcd) xhci_dbg(xhci, "Finished xhci_init\n"); /* Initializing Compliance Mode Recovery Data If Needed */ - if (compliance_mode_recovery_timer_quirk_check()) { + if (xhci_compliance_mode_recovery_timer_quirk_check()) { xhci->quirks |= XHCI_COMP_MODE_QUIRK; compliance_mode_recovery_timer_init(xhci); } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 29c978e37135..77600cefcaf1 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1853,4 +1853,7 @@ struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx); struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index); +/* xHCI quirks */ +bool xhci_compliance_mode_recovery_timer_quirk_check(void); + #endif /* __LINUX_XHCI_HCD_H */ From c15cddd900e867c5adfb3c79596479dc5975f743 Mon Sep 17 00:00:00 2001 From: Paul Taysom Date: Thu, 23 May 2013 14:31:43 -0700 Subject: [PATCH 097/429] ecryptfs: fixed msync to flush data When msync is called on a memory mapped file, that data is not flushed to the disk. In Linux, msync calls fsync for the file. For ecryptfs, fsync just calls the lower level file system's fsync. Changed the ecryptfs fsync code to call filemap_write_and_wait before calling the lower level fsync. Addresses the problem described in http://crbug.com/239536 Signed-off-by: Paul Taysom Signed-off-by: Tyler Hicks Cc: stable@vger.kernel.org # v3.6+ --- fs/ecryptfs/file.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index 201f0a0d6b0a..16f509d6fa49 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -295,6 +295,7 @@ static int ecryptfs_release(struct inode *inode, struct file *file) static int ecryptfs_fsync(struct file *file, loff_t start, loff_t end, int datasync) { + filemap_write_and_wait(file->f_mapping); return vfs_fsync(ecryptfs_file_to_lower(file), datasync); } From 39d4ecdb711ba44e0aa0b2f3db74ed5ac97abe21 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 24 May 2013 11:38:24 +0100 Subject: [PATCH 098/429] ASoC: wm5110: Correct DSP4R Mixer control name Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm5110.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index c00480bdf824..ba38f0679662 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -190,7 +190,7 @@ ARIZONA_MIXER_CONTROLS("DSP2R", ARIZONA_DSP2RMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("DSP3L", ARIZONA_DSP3LMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("DSP3R", ARIZONA_DSP3RMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("DSP4L", ARIZONA_DSP4LMIX_INPUT_1_SOURCE), -ARIZONA_MIXER_CONTROLS("DSP5R", ARIZONA_DSP4RMIX_INPUT_1_SOURCE), +ARIZONA_MIXER_CONTROLS("DSP4R", ARIZONA_DSP4RMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("Mic", ARIZONA_MICMIX_INPUT_1_SOURCE), ARIZONA_MIXER_CONTROLS("Noise", ARIZONA_NOISEMIX_INPUT_1_SOURCE), From 4d2593cc65fa15f2a36313aa8d03a0937226ad49 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 22 May 2013 23:09:50 +0000 Subject: [PATCH 099/429] qlge: add missing free_netdev() on error in qlge_probe() Add the missing free_netdev() before return from function qlge_probe() in the error handling case. Signed-off-by: Wei Yongjun Acked-by: Jitendra Kalsaria Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlge/qlge_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c index 50235d201592..f87cc216045b 100644 --- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c +++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c @@ -4717,6 +4717,7 @@ static int qlge_probe(struct pci_dev *pdev, dev_err(&pdev->dev, "net device registration failed.\n"); ql_release_all(pdev); pci_disable_device(pdev); + free_netdev(ndev); return err; } /* Start up the timer to trigger EEH if From 0d8c3e77e7fba8c84c871b43f35029daa92acc17 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 22 May 2013 23:59:28 +0000 Subject: [PATCH 100/429] ptp_pch: fix error handling in pch_probe() Fix to release resources when ptp_clock_register() fail instead of return error code directly. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/ptp/ptp_pch.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/ptp/ptp_pch.c b/drivers/ptp/ptp_pch.c index bea94510ad2d..71a2559278d7 100644 --- a/drivers/ptp/ptp_pch.c +++ b/drivers/ptp/ptp_pch.c @@ -628,9 +628,10 @@ pch_probe(struct pci_dev *pdev, const struct pci_device_id *id) chip->caps = ptp_pch_caps; chip->ptp_clock = ptp_clock_register(&chip->caps, &pdev->dev); - - if (IS_ERR(chip->ptp_clock)) - return PTR_ERR(chip->ptp_clock); + if (IS_ERR(chip->ptp_clock)) { + ret = PTR_ERR(chip->ptp_clock); + goto err_ptp_clock_reg; + } spin_lock_init(&chip->register_lock); @@ -669,6 +670,7 @@ pch_probe(struct pci_dev *pdev, const struct pci_device_id *id) err_req_irq: ptp_clock_unregister(chip->ptp_clock); +err_ptp_clock_reg: iounmap(chip->regs); chip->regs = NULL; From a622260254ee481747cceaaa8609985b29a31565 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 24 May 2013 05:49:58 +0000 Subject: [PATCH 101/429] ip_tunnel: fix kernel panic with icmp_dest_unreach Daniel Petre reported crashes in icmp_dst_unreach() with following call graph: #3 [ffff88003fc03938] __stack_chk_fail at ffffffff81037f77 #4 [ffff88003fc03948] icmp_send at ffffffff814d5fec #5 [ffff88003fc03ae8] ipv4_link_failure at ffffffff814a1795 #6 [ffff88003fc03af8] ipgre_tunnel_xmit at ffffffff814e7965 #7 [ffff88003fc03b78] dev_hard_start_xmit at ffffffff8146e032 #8 [ffff88003fc03bc8] sch_direct_xmit at ffffffff81487d66 #9 [ffff88003fc03c08] __qdisc_run at ffffffff81487efd #10 [ffff88003fc03c48] dev_queue_xmit at ffffffff8146e5a7 #11 [ffff88003fc03c88] ip_finish_output at ffffffff814ab596 Daniel found a similar problem mentioned in http://lkml.indiana.edu/hypermail/linux/kernel/1007.0/00961.html And indeed this is the root cause : skb->cb[] contains data fooling IP stack. We must clear IPCB in ip_tunnel_xmit() sooner in case dst_link_failure() is called. Or else skb->cb[] might contain garbage from GSO segmentation layer. A similar fix was tested on linux-3.9, but gre code was refactored in linux-3.10. I'll send patches for stable kernels as well. Many thanks to Daniel for providing reports, patches and testing ! Reported-by: Daniel Petre Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/ip_tunnel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index e4147ec1665a..be2f8da0ae8e 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -503,6 +503,7 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, inner_iph = (const struct iphdr *)skb_inner_network_header(skb); + memset(IPCB(skb), 0, sizeof(*IPCB(skb))); dst = tnl_params->daddr; if (dst == 0) { /* NBMA tunnel */ @@ -658,7 +659,6 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, skb_dst_drop(skb); skb_dst_set(skb, &rt->dst); - memset(IPCB(skb), 0, sizeof(*IPCB(skb))); /* Push down and install the IP header. */ skb_push(skb, sizeof(struct iphdr)); From f6825748bdbe381cfffe2dc13ca0b73050428fac Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Mon, 15 Apr 2013 17:08:35 +0200 Subject: [PATCH 102/429] mmc: sdhci-esdhc-imx: Fix SDIO interrupts Currently SDIO interrupts do not work on i.MX53 and maybe others. This was observed with a Marvell 8787 based SDIO wifi adapter using the mwifiex driver and firmware from the Marvell git repository. The symptom was a timeout after firmware download. Observing the SDIO_DAT1 line showed that an interrupt was requested (level 0) but no interrupt was generated in software, the line stayed low until a timeout ocurred and the card was reset. There is a Freescale errata ENGcm11186 "eSDHC misses SDIO interrupt when CINT is disabled" The workaround suggested by this errata is already implemented and involves clearing and then setting the D3CD bit in the host control register [see esdhc_writel_le()] However, when esdhc_writeb_le() is later used to write to SDHCI_HOST_CONTROL it always resets the D3CD bit. To fix this simply add the D3CD bit to the set of bits not modified by esdhc_writeb_le(). Signed-off-by: Martin Fuzzey Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-esdhc-imx.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 67d6dde2ff19..9b0a0a91ea0a 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -324,8 +324,10 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) /* * Do not touch buswidth bits here. This is done in * esdhc_pltfm_bus_width. + * Do not touch the D3CD bit either which is used for the + * SDIO interrupt errata workaround. */ - mask = 0xffff & ~ESDHC_CTRL_BUSWIDTH_MASK; + mask = 0xffff & ~(ESDHC_CTRL_BUSWIDTH_MASK | ESDHC_CTRL_D3CD); esdhc_clrset_le(host, mask, new_val, reg); return; From 361b8482026c926997b1d3d5a045bc9f5bc02b16 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Fri, 15 Mar 2013 09:49:26 +0100 Subject: [PATCH 103/429] mmc: sdhci-esdhc-imx: fix multiblock reads on i.MX53 The eSDHC controller on the i.MX53 needs an additional, non spec compliant CMD12 after a multiblock read with a predefined number of blocks. Otherwise the internal state machine won't go back to the idle state. This commit effectively reverts 5b6b0ad6 (mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5), which fixed part of the problem by making multiblock reads work, however this fix was not sufficient when multi- and singleblock reads got intermixed. This implements the recommended workaround (Freescale i.MX Reference Manual, section 29.6.8 "Multi-block Read") by manually sending a CMD12 with the RSPTYP bits cleared. Signed-off-by: Lucas Stach Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-esdhc-imx.c | 37 +++++++++++++++++++++++++++--- 1 file changed, 34 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 9b0a0a91ea0a..d5f0d59e1310 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -85,6 +85,12 @@ struct pltfm_imx_data { struct clk *clk_ipg; struct clk *clk_ahb; struct clk *clk_per; + enum { + NO_CMD_PENDING, /* no multiblock command pending*/ + MULTIBLK_IN_PROCESS, /* exact multiblock cmd in process */ + WAIT_FOR_INT, /* sent CMD12, waiting for response INT */ + } multiblock_status; + }; static struct platform_device_id imx_esdhc_devtype[] = { @@ -154,6 +160,8 @@ static inline void esdhc_clrset_le(struct sdhci_host *host, u32 mask, u32 val, i static u32 esdhc_readl_le(struct sdhci_host *host, int reg) { + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct pltfm_imx_data *imx_data = pltfm_host->priv; u32 val = readl(host->ioaddr + reg); if (unlikely(reg == SDHCI_CAPABILITIES)) { @@ -175,6 +183,18 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) val &= ~ESDHC_INT_VENDOR_SPEC_DMA_ERR; val |= SDHCI_INT_ADMA_ERROR; } + + /* + * mask off the interrupt we get in response to the manually + * sent CMD12 + */ + if ((imx_data->multiblock_status == WAIT_FOR_INT) && + ((val & SDHCI_INT_RESPONSE) == SDHCI_INT_RESPONSE)) { + val &= ~SDHCI_INT_RESPONSE; + writel(SDHCI_INT_RESPONSE, host->ioaddr + + SDHCI_INT_STATUS); + imx_data->multiblock_status = NO_CMD_PENDING; + } } return val; @@ -211,6 +231,15 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg) v = readl(host->ioaddr + ESDHC_VENDOR_SPEC); v &= ~ESDHC_VENDOR_SPEC_SDIO_QUIRK; writel(v, host->ioaddr + ESDHC_VENDOR_SPEC); + + if (imx_data->multiblock_status == MULTIBLK_IN_PROCESS) + { + /* send a manual CMD12 with RESPTYP=none */ + data = MMC_STOP_TRANSMISSION << 24 | + SDHCI_CMD_ABORTCMD << 16; + writel(data, host->ioaddr + SDHCI_TRANSFER_MODE); + imx_data->multiblock_status = WAIT_FOR_INT; + } } if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) { @@ -277,11 +306,13 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) } return; case SDHCI_COMMAND: - if ((host->cmd->opcode == MMC_STOP_TRANSMISSION || - host->cmd->opcode == MMC_SET_BLOCK_COUNT) && - (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) + if (host->cmd->opcode == MMC_STOP_TRANSMISSION) val |= SDHCI_CMD_ABORTCMD; + if ((host->cmd->opcode == MMC_SET_BLOCK_COUNT) && + (imx_data->flags & ESDHC_FLAG_MULTIBLK_NO_INT)) + imx_data->multiblock_status = MULTIBLK_IN_PROCESS; + if (is_imx6q_usdhc(imx_data)) writel(val << 16, host->ioaddr + SDHCI_TRANSFER_MODE); From 8c964df07aaf0e70d1756d204c306f69ca5023b8 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Fri, 19 Apr 2013 09:11:22 +0000 Subject: [PATCH 104/429] mmc: atmel-mci: convert to dma_request_slave_channel_compat() Use generic DMA DT helper. Platforms booting with or without DT populated are both supported. Signed-off-by: Ludovic Desroches Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre Signed-off-by: Chris Ball --- drivers/mmc/host/atmel-mci.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index e75774f72606..aca59d93d5a9 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -2230,10 +2230,15 @@ static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot, mmc_free_host(slot->mmc); } -static bool atmci_filter(struct dma_chan *chan, void *slave) +static bool atmci_filter(struct dma_chan *chan, void *pdata) { - struct mci_dma_data *sl = slave; + struct mci_platform_data *sl_pdata = pdata; + struct mci_dma_data *sl; + if (!sl_pdata) + return false; + + sl = sl_pdata->dma_slave; if (sl && find_slave_dev(sl) == chan->device->dev) { chan->private = slave_data_ptr(sl); return true; @@ -2245,24 +2250,18 @@ static bool atmci_filter(struct dma_chan *chan, void *slave) static bool atmci_configure_dma(struct atmel_mci *host) { struct mci_platform_data *pdata; + dma_cap_mask_t mask; if (host == NULL) return false; pdata = host->pdev->dev.platform_data; - if (!pdata) - return false; + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); - if (pdata->dma_slave && find_slave_dev(pdata->dma_slave)) { - dma_cap_mask_t mask; - - /* Try to grab a DMA channel */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - host->dma.chan = - dma_request_channel(mask, atmci_filter, pdata->dma_slave); - } + host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata, + &host->pdev->dev, "rxtx"); if (!host->dma.chan) { dev_warn(&host->pdev->dev, "no DMA channel available\n"); return false; From 1d1ff45871984364056ebfc528ed31ff7f03f970 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 26 Apr 2013 11:27:21 +0300 Subject: [PATCH 105/429] mmc: sdhci-acpi: fix initial runtime pm status Initial runtime pm status is active. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-acpi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 7bcf74b1a5cd..1da5f29abbcb 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -202,6 +202,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev) goto err_free; if (c->use_runtime_pm) { + pm_runtime_set_active(dev); pm_suspend_ignore_children(dev, 1); pm_runtime_set_autosuspend_delay(dev, 50); pm_runtime_use_autosuspend(dev); From 07a588837be0a18075fedf71e6963b5109abec03 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 26 Apr 2013 11:27:22 +0300 Subject: [PATCH 106/429] mmc: sdhci-acpi: add more device ids Add three more ACPI HIDs. Also, as some devices must be further distinguished by ACPI UID, slot information is now associated with HID and UID. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-acpi.c | 66 ++++++++++++++++++++++++++++++----- 1 file changed, 58 insertions(+), 8 deletions(-) diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 1da5f29abbcb..706d9cb1a49e 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -87,6 +87,12 @@ static const struct sdhci_ops sdhci_acpi_ops_dflt = { .enable_dma = sdhci_acpi_enable_dma, }; +static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = { + .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .caps2 = MMC_CAP2_HC_ERASE_SZ, + .flags = SDHCI_ACPI_RUNTIME_PM, +}; + static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = { .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON, .caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD, @@ -94,23 +100,67 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = { .pm_caps = MMC_PM_KEEP_POWER, }; +static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = { +}; + +struct sdhci_acpi_uid_slot { + const char *hid; + const char *uid; + const struct sdhci_acpi_slot *slot; +}; + +static const struct sdhci_acpi_uid_slot sdhci_acpi_uids[] = { + { "80860F14" , "1" , &sdhci_acpi_slot_int_emmc }, + { "80860F14" , "3" , &sdhci_acpi_slot_int_sd }, + { "INT33BB" , "2" , &sdhci_acpi_slot_int_sdio }, + { "INT33C6" , NULL, &sdhci_acpi_slot_int_sdio }, + { "PNP0D40" }, + { }, +}; + static const struct acpi_device_id sdhci_acpi_ids[] = { - { "INT33C6", (kernel_ulong_t)&sdhci_acpi_slot_int_sdio }, - { "PNP0D40" }, + { "80860F14" }, + { "INT33BB" }, + { "INT33C6" }, + { "PNP0D40" }, { }, }; MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids); -static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(const char *hid) +static const struct sdhci_acpi_slot *sdhci_acpi_get_slot_by_ids(const char *hid, + const char *uid) { - const struct acpi_device_id *id; + const struct sdhci_acpi_uid_slot *u; - for (id = sdhci_acpi_ids; id->id[0]; id++) - if (!strcmp(id->id, hid)) - return (const struct sdhci_acpi_slot *)id->driver_data; + for (u = sdhci_acpi_uids; u->hid; u++) { + if (strcmp(u->hid, hid)) + continue; + if (!u->uid) + return u->slot; + if (uid && !strcmp(u->uid, uid)) + return u->slot; + } return NULL; } +static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(acpi_handle handle, + const char *hid) +{ + const struct sdhci_acpi_slot *slot; + struct acpi_device_info *info; + const char *uid = NULL; + acpi_status status; + + status = acpi_get_object_info(handle, &info); + if (!ACPI_FAILURE(status) && (info->valid & ACPI_VALID_UID)) + uid = info->unique_id.string; + + slot = sdhci_acpi_get_slot_by_ids(hid, uid); + + kfree(info); + return slot; +} + static int sdhci_acpi_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -148,7 +198,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev) c = sdhci_priv(host); c->host = host; - c->slot = sdhci_acpi_get_slot(hid); + c->slot = sdhci_acpi_get_slot(handle, hid); c->pdev = pdev; c->use_runtime_pm = sdhci_acpi_flag(c, SDHCI_ACPI_RUNTIME_PM); From 728ef3d1939e23e26067608d8d8da9571be14b1d Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 26 Apr 2013 11:27:23 +0300 Subject: [PATCH 107/429] mmc: sdhci-pci: add more device ids Add three more PCI device ids. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-pci.c | 54 ++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 0012d3fdc999..701d06d0e1fb 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -33,6 +33,9 @@ */ #define PCI_DEVICE_ID_INTEL_PCH_SDIO0 0x8809 #define PCI_DEVICE_ID_INTEL_PCH_SDIO1 0x880a +#define PCI_DEVICE_ID_INTEL_BYT_EMMC 0x0f14 +#define PCI_DEVICE_ID_INTEL_BYT_SDIO 0x0f15 +#define PCI_DEVICE_ID_INTEL_BYT_SD 0x0f16 /* * PCI registers @@ -304,6 +307,33 @@ static const struct sdhci_pci_fixes sdhci_intel_pch_sdio = { .probe_slot = pch_hc_probe_slot, }; +static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot) +{ + slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE; + slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ; + return 0; +} + +static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot) +{ + slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE; + return 0; +} + +static const struct sdhci_pci_fixes sdhci_intel_byt_emmc = { + .allow_runtime_pm = true, + .probe_slot = byt_emmc_probe_slot, +}; + +static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = { + .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON, + .allow_runtime_pm = true, + .probe_slot = byt_sdio_probe_slot, +}; + +static const struct sdhci_pci_fixes sdhci_intel_byt_sd = { +}; + /* O2Micro extra registers */ #define O2_SD_LOCK_WP 0xD3 #define O2_SD_MULTI_VCC3V 0xEE @@ -855,6 +885,30 @@ static const struct pci_device_id pci_ids[] = { .driver_data = (kernel_ulong_t)&sdhci_intel_pch_sdio, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BYT_EMMC, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_emmc, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BYT_SDIO, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_sdio, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_BYT_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_byt_sd, + }, + { .vendor = PCI_VENDOR_ID_O2, .device = PCI_DEVICE_ID_O2_8120, From cf5ae40b3968ca769e683b9b071685ad82ee893c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 10 May 2013 17:42:33 +0530 Subject: [PATCH 108/429] mmc: omap_hsmmc: Fix the DT pbias workaround for MMC controllers 2 to 5 Otherwise SDIO cards won't necessarily work when booted with device tree as we will never power down the SDIO cards. This means the SDIO card reset does not happen which at least some WLAN controllers expect to happen with ifconfig wlan0 down. The PBIAS voltage is only available for the first controller instance, so let's limit the PBIAS workaround to the first controller only. Signed-off-by: Tony Lindgren Tested-by: Luciano Coelho Signed-off-by: Balaji T K Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 6e44025acf01..29a63d2839ec 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -161,6 +161,7 @@ struct omap_hsmmc_host { */ struct regulator *vcc; struct regulator *vcc_aux; + int pbias_disable; void __iomem *base; resource_size_t mapbase; spinlock_t irq_lock; /* Prevent races with irq handler */ @@ -255,11 +256,11 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on, if (!host->vcc) return 0; /* - * With DT, never turn OFF the regulator. This is because + * With DT, never turn OFF the regulator for MMC1. This is because * the pbias cell programming support is still missing when * booting with Device tree */ - if (dev->of_node && !vdd) + if (host->pbias_disable && !vdd) return 0; if (mmc_slot(host).before_set_reg) @@ -1520,10 +1521,10 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) (ios->vdd == DUAL_VOLT_OCR_BIT) && /* * With pbias cell programming missing, this - * can't be allowed when booting with device + * can't be allowed on MMC1 when booting with device * tree. */ - !host->dev->of_node) { + !host->pbias_disable) { /* * The mmc_select_voltage fn of the core does * not seem to set the power_mode to @@ -1871,6 +1872,10 @@ static int omap_hsmmc_probe(struct platform_device *pdev) omap_hsmmc_context_save(host); + /* This can be removed once we support PBIAS with DT */ + if (host->dev->of_node && host->mapbase == 0x4809c000) + host->pbias_disable = 1; + host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck"); /* * MMC can still work without debounce clock. From d272fbf0ca4a59339c768d76858f4add6ff36ace Mon Sep 17 00:00:00 2001 From: Matt Porter Date: Fri, 10 May 2013 17:42:34 +0530 Subject: [PATCH 109/429] mmc: omap_hsmmc: convert to dma_request_slave_channel_compat Convert dmaengine channel requests to use dma_request_slave_channel_compat(). This supports platforms booting with or without DT populated. Signed-off-by: Matt Porter Acked-by: Tony Lindgren Acked-by: Arnd Bergmann Signed-off-by: Balaji T K Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 29a63d2839ec..dc89aead35a5 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1930,14 +1930,20 @@ static int omap_hsmmc_probe(struct platform_device *pdev) dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); - host->rx_chan = dma_request_channel(mask, omap_dma_filter_fn, &rx_req); + host->rx_chan = + dma_request_slave_channel_compat(mask, omap_dma_filter_fn, + &rx_req, &pdev->dev, "rx"); + if (!host->rx_chan) { dev_err(mmc_dev(host->mmc), "unable to obtain RX DMA engine channel %u\n", rx_req); ret = -ENXIO; goto err_irq; } - host->tx_chan = dma_request_channel(mask, omap_dma_filter_fn, &tx_req); + host->tx_chan = + dma_request_slave_channel_compat(mask, omap_dma_filter_fn, + &tx_req, &pdev->dev, "tx"); + if (!host->tx_chan) { dev_err(mmc_dev(host->mmc), "unable to obtain TX DMA engine channel %u\n", tx_req); ret = -ENXIO; From 4a29b5591faf25555fdf2b717594d50f70c15066 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Fri, 10 May 2013 17:42:35 +0530 Subject: [PATCH 110/429] mmc: omap_hsmmc: Skip platform_get_resource_byname() for dt case MMC driver probe will abort for DT case because of failed platform_get_resource_byname() lookup. Fix it by skipping resource lookup byname for device tree build. Issue is hidden because hwmod populates the IO resources which helps to succeed platform_get_resource_byname() and probe. Signed-off-by: Santosh Shilimkar Signed-off-by: Balaji T K Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index dc89aead35a5..eccedc7d06a4 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1911,21 +1911,23 @@ static int omap_hsmmc_probe(struct platform_device *pdev) omap_hsmmc_conf_bus_power(host); - res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); - if (!res) { - dev_err(mmc_dev(host->mmc), "cannot get DMA TX channel\n"); - ret = -ENXIO; - goto err_irq; - } - tx_req = res->start; + if (!pdev->dev.of_node) { + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); + if (!res) { + dev_err(mmc_dev(host->mmc), "cannot get DMA TX channel\n"); + ret = -ENXIO; + goto err_irq; + } + tx_req = res->start; - res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); - if (!res) { - dev_err(mmc_dev(host->mmc), "cannot get DMA RX channel\n"); - ret = -ENXIO; - goto err_irq; + res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); + if (!res) { + dev_err(mmc_dev(host->mmc), "cannot get DMA RX channel\n"); + ret = -ENXIO; + goto err_irq; + } + rx_req = res->start; } - rx_req = res->start; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); From 9acf73b7d06eaa3fbfbfafc9c835f8fe0d751eff Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 22 May 2013 10:24:37 +0200 Subject: [PATCH 111/429] s390/smp: lost IPIs on cpu hotplug IPIs might be lost when a cpu gets brought offline: When stop_machine executes its state machine there is a race window for the state STOPMACHINE_DISABLE_IRQ where the to be brought offline cpu might already have irqs disabled but a different cpu still may have irqs enabled. If the enabled cpu receives an interrupt and as a result sends an IPI to the to be offlined cpu in its bottom halve context, the IPI won't be noticed before the cpu is offline. In fact the race window is much larger since there is no guarantee when an IPI will be received. To fix this check for enqueued but not yet received IPIs in the cpu_disable() path and call the respective handlers before the cpu is marked offline. Reported-by: Juergen Doelle Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/smp.c | 45 +++++++++++++++++++----------------------- 1 file changed, 20 insertions(+), 25 deletions(-) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 05674b669001..4f977d0d25c2 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -428,34 +428,27 @@ void smp_stop_cpu(void) * This is the main routine where commands issued by other * cpus are handled. */ +static void smp_handle_ext_call(void) +{ + unsigned long bits; + + /* handle bit signal external calls */ + bits = xchg(&pcpu_devices[smp_processor_id()].ec_mask, 0); + if (test_bit(ec_stop_cpu, &bits)) + smp_stop_cpu(); + if (test_bit(ec_schedule, &bits)) + scheduler_ipi(); + if (test_bit(ec_call_function, &bits)) + generic_smp_call_function_interrupt(); + if (test_bit(ec_call_function_single, &bits)) + generic_smp_call_function_single_interrupt(); +} + static void do_ext_call_interrupt(struct ext_code ext_code, unsigned int param32, unsigned long param64) { - unsigned long bits; - int cpu; - - cpu = smp_processor_id(); - if (ext_code.code == 0x1202) - inc_irq_stat(IRQEXT_EXC); - else - inc_irq_stat(IRQEXT_EMS); - /* - * handle bit signal external calls - */ - bits = xchg(&pcpu_devices[cpu].ec_mask, 0); - - if (test_bit(ec_stop_cpu, &bits)) - smp_stop_cpu(); - - if (test_bit(ec_schedule, &bits)) - scheduler_ipi(); - - if (test_bit(ec_call_function, &bits)) - generic_smp_call_function_interrupt(); - - if (test_bit(ec_call_function_single, &bits)) - generic_smp_call_function_single_interrupt(); - + inc_irq_stat(ext_code.code == 0x1202 ? IRQEXT_EXC : IRQEXT_EMS); + smp_handle_ext_call(); } void arch_send_call_function_ipi_mask(const struct cpumask *mask) @@ -760,6 +753,8 @@ int __cpu_disable(void) { unsigned long cregs[16]; + /* Handle possible pending IPIs */ + smp_handle_ext_call(); set_cpu_online(smp_processor_id(), false); /* Disable pseudo page faults on this cpu. */ pfault_fini(); From 1351c5d3b189a487fbacd5cdf2dc3e6faf12c682 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 May 2013 23:09:56 +0200 Subject: [PATCH 112/429] mac80211: assign AP_VLAN hw queues correctly A lot of code in mac80211 assumes that the hw queues are set up correctly for all interfaces (except for monitor) but this isn't true for AP_VLAN interfaces. Fix this by copying the AP master configuration when an AP VLAN is brought up, after this the AP interface can't change its configuration any more and needs to be brought down to change it, which also forces AP_VLAN interfaces down, so just copying in open() is sufficient. Reported-by: Jouni Malinen Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 68f51c3af49f..00e2238355f0 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -474,6 +474,9 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) master->control_port_protocol; sdata->control_port_no_encrypt = master->control_port_no_encrypt; + sdata->vif.cab_queue = master->vif.cab_queue; + memcpy(sdata->vif.hw_queue, master->vif.hw_queue, + sizeof(sdata->vif.hw_queue)); break; } case NL80211_IFTYPE_AP: From c8aa22db0112f640ac6631347f850879c621840b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 May 2013 01:06:09 +0200 Subject: [PATCH 113/429] mac80211: close AP_VLAN interfaces before unregistering all Since Eric's commit efe117ab8 ("Speedup ieee80211_remove_interfaces") there's a bug in mac80211 when it unregisters with AP_VLAN interfaces up. If the AP_VLAN interface was registered after the AP it belongs to (which is the typical case) and then we get into this code path, unregister_netdevice_many() will crash because it isn't prepared to deal with interfaces being closed in the middle of it. Exactly this happens though, because we iterate the list, find the AP master this AP_VLAN belongs to and dev_close() the dependent VLANs. After this, unregister_netdevice_many() won't pick up the fact that the AP_VLAN is already down and will do it again, causing a crash. Cc: stable@vger.kernel.org [2.6.33+] Cc: Eric Dumazet Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 00e2238355f0..ceef64426a8d 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1703,6 +1703,15 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local) ASSERT_RTNL(); + /* + * Close all AP_VLAN interfaces first, as otherwise they + * might be closed while the AP interface they belong to + * is closed, causing unregister_netdevice_many() to crash. + */ + list_for_each_entry(sdata, &local->interfaces, list) + if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + dev_close(sdata->dev); + mutex_lock(&local->iflist_mtx); list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) { list_del(&sdata->list); From ac20976dcaeea3e77e40e9aac8f3799d2a22ea2b Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Mon, 27 May 2013 10:43:09 +0200 Subject: [PATCH 114/429] mac80211: Allow single vif mac address change with addr_mask When changing the MAC address of a single vif mac80211 will check if the new address fits into the address mask specified by the driver. This only needs to be done when using multiple BSSIDs. Hence, check the new address only against all other vifs. Also fix the MAC address assignment on new interfaces if the user changed the address of a vif such that perm_addr is not covered by addr_mask anymore. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=57371 Signed-off-by: Helmut Schaa Signed-off-by: Jakub Kicinski Reported-by: Alessandro Lannocca Cc: Alessandro Lannocca Cc: Bruno Randolf Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index ceef64426a8d..98d20c0f6fed 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -159,9 +159,10 @@ static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) return 0; } -static int ieee80211_verify_mac(struct ieee80211_local *local, u8 *addr) +static int ieee80211_verify_mac(struct ieee80211_sub_if_data *sdata, u8 *addr) { - struct ieee80211_sub_if_data *sdata; + struct ieee80211_local *local = sdata->local; + struct ieee80211_sub_if_data *iter; u64 new, mask, tmp; u8 *m; int ret = 0; @@ -181,11 +182,14 @@ static int ieee80211_verify_mac(struct ieee80211_local *local, u8 *addr) mutex_lock(&local->iflist_mtx); - list_for_each_entry(sdata, &local->interfaces, list) { - if (sdata->vif.type == NL80211_IFTYPE_MONITOR) + list_for_each_entry(iter, &local->interfaces, list) { + if (iter == sdata) continue; - m = sdata->vif.addr; + if (iter->vif.type == NL80211_IFTYPE_MONITOR) + continue; + + m = iter->vif.addr; tmp = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); @@ -209,7 +213,7 @@ static int ieee80211_change_mac(struct net_device *dev, void *addr) if (ieee80211_sdata_running(sdata)) return -EBUSY; - ret = ieee80211_verify_mac(sdata->local, sa->sa_data); + ret = ieee80211_verify_mac(sdata, sa->sa_data); if (ret) return ret; @@ -1486,7 +1490,17 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local, break; } + /* + * Pick address of existing interface in case user changed + * MAC address manually, default to perm_addr. + */ m = local->hw.wiphy->perm_addr; + list_for_each_entry(sdata, &local->interfaces, list) { + if (sdata->vif.type == NL80211_IFTYPE_MONITOR) + continue; + m = sdata->vif.addr; + break; + } start = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); From a87783699b23395c46bbeeb5d28f6db24897bf26 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 22 May 2013 10:48:10 +0300 Subject: [PATCH 115/429] iwlwifi: dvm: fix zero LQ CMD sending avoidance In 63b77bf489881747c5118476918cc8c29378ee63 iwlwifi: dvm: don't send zeroed LQ cmd I tried to avoid to send zeroed LQ cmd, but I made a (very) stupid mistake in the memcmp. Since this patch has been ported to stable, the fix should go to stable too. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=58341 Cc: stable@vger.kernel.org Reported-by: Hinnerk van Bruinehsen Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/sta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index db183b44e038..c3c13ce96eb0 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -735,7 +735,7 @@ void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx) memcpy(&lq, priv->stations[i].lq, sizeof(struct iwl_link_quality_cmd)); - if (!memcmp(&lq, &zero_lq, sizeof(lq))) + if (memcmp(&lq, &zero_lq, sizeof(lq))) send_lq = true; } spin_unlock_bh(&priv->sta_lock); From f6a12a7d0b1a70e969ae4f6d7c5201cdaf6edde0 Mon Sep 17 00:00:00 2001 From: "Meyer, Kirk" Date: Thu, 23 May 2013 17:06:57 +0000 Subject: [PATCH 116/429] microblaze: Reversed logic in futex cmpxchg futex_atomic_cmpxchg_inatomic exchanged if the values were unequal rather than equal. This caused incorrect behavior of robust futexes. Signed-off-by: Kirk Meyer Signed-off-by: Michal Simek --- arch/microblaze/include/asm/futex.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/include/asm/futex.h b/arch/microblaze/include/asm/futex.h index ff8cde159d9a..01848f056f43 100644 --- a/arch/microblaze/include/asm/futex.h +++ b/arch/microblaze/include/asm/futex.h @@ -105,7 +105,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, __asm__ __volatile__ ("1: lwx %1, %3, r0; \ cmp %2, %1, %4; \ - beqi %2, 3f; \ + bnei %2, 3f; \ 2: swx %5, %3, r0; \ addic %2, r0, 0; \ bnei %2, 1b; \ From dc7b3eb900aab02e5cafbca3948d005be13fb4a5 Mon Sep 17 00:00:00 2001 From: Grzegorz Lyczba Date: Mon, 13 May 2013 23:56:24 +0200 Subject: [PATCH 117/429] ipvs: Fix reuse connection if real server is dead Expire cached connection for new TCP/SCTP connection if real server is down. Otherwise, IPVS uses the dead server for the reused connection, instead of a new working one. Signed-off-by: Grzegorz Lyczba Acked-by: Hans Schillstrom Acked-by: Julian Anastasov Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_core.c | 35 +++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index 085b5880ab0d..05565d2b3a61 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -1001,6 +1001,32 @@ static inline int is_tcp_reset(const struct sk_buff *skb, int nh_len) return th->rst; } +static inline bool is_new_conn(const struct sk_buff *skb, + struct ip_vs_iphdr *iph) +{ + switch (iph->protocol) { + case IPPROTO_TCP: { + struct tcphdr _tcph, *th; + + th = skb_header_pointer(skb, iph->len, sizeof(_tcph), &_tcph); + if (th == NULL) + return false; + return th->syn; + } + case IPPROTO_SCTP: { + sctp_chunkhdr_t *sch, schunk; + + sch = skb_header_pointer(skb, iph->len + sizeof(sctp_sctphdr_t), + sizeof(schunk), &schunk); + if (sch == NULL) + return false; + return sch->type == SCTP_CID_INIT; + } + default: + return false; + } +} + /* Handle response packets: rewrite addresses and send away... */ static unsigned int @@ -1612,6 +1638,15 @@ ip_vs_in(unsigned int hooknum, struct sk_buff *skb, int af) * Check if the packet belongs to an existing connection entry */ cp = pp->conn_in_get(af, skb, &iph, 0); + + if (unlikely(sysctl_expire_nodest_conn(ipvs)) && cp && cp->dest && + unlikely(!atomic_read(&cp->dest->weight)) && !iph.fragoffs && + is_new_conn(skb, &iph)) { + ip_vs_conn_expire_now(cp); + __ip_vs_conn_put(cp); + cp = NULL; + } + if (unlikely(!cp) && !iph.fragoffs) { /* No (second) fragments need to enter here, as nf_defrag_ipv6 * replayed fragment zero will already have created the cp From 2c06897e4597b1cd68ef29e4145917a751c2b4cd Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 16 May 2013 12:15:35 +0100 Subject: [PATCH 118/429] ARM: ux500: Only configure wake-up reasons on ux500 based platforms Multiplatform calls all enabled platforms' initcalls. In the ux500_idle_init() initcall we call into the DBx500-PRCMU which in turn executes some ux500 specific register reads/writes. When running on some !ux500 platforms this ends up causing a kernel Oops. This patch ensures the PRCMU call is only invoked when running on ux500 based platforms. Reported-by: Rob Herring Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cpuidle.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-ux500/cpuidle.c b/arch/arm/mach-ux500/cpuidle.c index 317a2be129fb..a45dd09daed9 100644 --- a/arch/arm/mach-ux500/cpuidle.c +++ b/arch/arm/mach-ux500/cpuidle.c @@ -21,6 +21,7 @@ #include #include "db8500-regs.h" +#include "id.h" static atomic_t master = ATOMIC_INIT(0); static DEFINE_SPINLOCK(master_lock); @@ -114,6 +115,9 @@ static struct cpuidle_driver ux500_idle_driver = { int __init ux500_idle_init(void) { + if (!(cpu_is_u8500_family() || cpu_is_ux540_family())) + return -ENODEV; + /* Configure wake up reasons */ prcmu_enable_wakeups(PRCMU_WAKEUP(ARM) | PRCMU_WAKEUP(RTC) | PRCMU_WAKEUP(ABB)); From 67b7c75e1a42f8288450203cd80a26b11dab8582 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Fri, 24 May 2013 12:22:19 +0100 Subject: [PATCH 119/429] ARM: ux500: Provide supplies for AUX1, AUX2 and AUX3 This patch fixes a bug introduced in the v3.10 merge window. The AB8500 External Regulator driver has recently landed upstream, which registers each of the 3 external regulators located on the AB8500. If these regulators are marked as 'always on', there is a potential for power-loss. If they're not and are seemingly unused the Regulator subsystem will attempt to disable them to save power. This causes an issue for AUX1, AUX2 and AUX3 as they obtain their power from EXT3. So we're specifying that here to prevent EXT3 from being powered down. Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-regulators.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 33c353bc1c4a..d6b7c8556fa1 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -374,6 +374,7 @@ static struct ab8500_regulator_reg_init ab8500_reg_init[] = { static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { /* supplies to the display/camera */ [AB8500_LDO_AUX1] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-DISPLAY", .min_uV = 2800000, @@ -387,6 +388,7 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { }, /* supplies to the on-board eMMC */ [AB8500_LDO_AUX2] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-eMMC1", .min_uV = 1100000, @@ -402,6 +404,7 @@ static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { }, /* supply for VAUX3, supplies to SDcard slots */ [AB8500_LDO_AUX3] = { + .supply_regulator = "ab8500-ext-supply3", .constraints = { .name = "V-MMC-SD", .min_uV = 1100000, From d9f998639f539613bb25cbbca380c81c892d586c Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Thu, 16 May 2013 21:33:18 -0700 Subject: [PATCH 120/429] pinctrl: samsung: fix suspend/resume functionality The GPIO states need to be restored after s2r and this is not currently supported in the pinctrl driver. This patch saves the gpio states before suspend and restores them after resume. Saving and restoring is done very early using syscore_ops and must happen before pins are released from their powerdown state. Patch originally from Prathyush K but rewritten by Doug Anderson . Signed-off-by: Prathyush K Signed-off-by: Doug Anderson Tested-by: Tomasz Figa Acked-by: Kukjin Kim Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-samsung.c | 148 ++++++++++++++++++++++++++++++ drivers/pinctrl/pinctrl-samsung.h | 5 + 2 files changed, 153 insertions(+) diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 055d0162098b..15db2580c145 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "core.h" #include "pinctrl-samsung.h" @@ -48,6 +49,9 @@ static struct pin_config { { "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN }, }; +/* Global list of devices (struct samsung_pinctrl_drv_data) */ +LIST_HEAD(drvdata_list); + static unsigned int pin_base; static inline struct samsung_pin_bank *gc_to_pin_bank(struct gpio_chip *gc) @@ -956,9 +960,145 @@ static int samsung_pinctrl_probe(struct platform_device *pdev) ctrl->eint_wkup_init(drvdata); platform_set_drvdata(pdev, drvdata); + + /* Add to the global list */ + list_add_tail(&drvdata->node, &drvdata_list); + return 0; } +#ifdef CONFIG_PM + +/** + * samsung_pinctrl_suspend_dev - save pinctrl state for suspend for a device + * + * Save data for all banks handled by this device. + */ +static void samsung_pinctrl_suspend_dev( + struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + void __iomem *virt_base = drvdata->virt_base; + int i; + + for (i = 0; i < ctrl->nr_banks; i++) { + struct samsung_pin_bank *bank = &ctrl->pin_banks[i]; + void __iomem *reg = virt_base + bank->pctl_offset; + + u8 *offs = bank->type->reg_offset; + u8 *widths = bank->type->fld_width; + enum pincfg_type type; + + /* Registers without a powerdown config aren't lost */ + if (!widths[PINCFG_TYPE_CON_PDN]) + continue; + + for (type = 0; type < PINCFG_TYPE_NUM; type++) + if (widths[type]) + bank->pm_save[type] = readl(reg + offs[type]); + + if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) { + /* Some banks have two config registers */ + bank->pm_save[PINCFG_TYPE_NUM] = + readl(reg + offs[PINCFG_TYPE_FUNC] + 4); + pr_debug("Save %s @ %p (con %#010x %08x)\n", + bank->name, reg, + bank->pm_save[PINCFG_TYPE_FUNC], + bank->pm_save[PINCFG_TYPE_NUM]); + } else { + pr_debug("Save %s @ %p (con %#010x)\n", bank->name, + reg, bank->pm_save[PINCFG_TYPE_FUNC]); + } + } +} + +/** + * samsung_pinctrl_resume_dev - restore pinctrl state from suspend for a device + * + * Restore one of the banks that was saved during suspend. + * + * We don't bother doing anything complicated to avoid glitching lines since + * we're called before pad retention is turned off. + */ +static void samsung_pinctrl_resume_dev(struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + void __iomem *virt_base = drvdata->virt_base; + int i; + + for (i = 0; i < ctrl->nr_banks; i++) { + struct samsung_pin_bank *bank = &ctrl->pin_banks[i]; + void __iomem *reg = virt_base + bank->pctl_offset; + + u8 *offs = bank->type->reg_offset; + u8 *widths = bank->type->fld_width; + enum pincfg_type type; + + /* Registers without a powerdown config aren't lost */ + if (!widths[PINCFG_TYPE_CON_PDN]) + continue; + + if (widths[PINCFG_TYPE_FUNC] * bank->nr_pins > 32) { + /* Some banks have two config registers */ + pr_debug("%s @ %p (con %#010x %08x => %#010x %08x)\n", + bank->name, reg, + readl(reg + offs[PINCFG_TYPE_FUNC]), + readl(reg + offs[PINCFG_TYPE_FUNC] + 4), + bank->pm_save[PINCFG_TYPE_FUNC], + bank->pm_save[PINCFG_TYPE_NUM]); + writel(bank->pm_save[PINCFG_TYPE_NUM], + reg + offs[PINCFG_TYPE_FUNC] + 4); + } else { + pr_debug("%s @ %p (con %#010x => %#010x)\n", bank->name, + reg, readl(reg + offs[PINCFG_TYPE_FUNC]), + bank->pm_save[PINCFG_TYPE_FUNC]); + } + for (type = 0; type < PINCFG_TYPE_NUM; type++) + if (widths[type]) + writel(bank->pm_save[type], reg + offs[type]); + } +} + +/** + * samsung_pinctrl_suspend - save pinctrl state for suspend + * + * Save data for all banks across all devices. + */ +static int samsung_pinctrl_suspend(void) +{ + struct samsung_pinctrl_drv_data *drvdata; + + list_for_each_entry(drvdata, &drvdata_list, node) { + samsung_pinctrl_suspend_dev(drvdata); + } + + return 0; +} + +/** + * samsung_pinctrl_resume - restore pinctrl state for suspend + * + * Restore data for all banks across all devices. + */ +static void samsung_pinctrl_resume(void) +{ + struct samsung_pinctrl_drv_data *drvdata; + + list_for_each_entry_reverse(drvdata, &drvdata_list, node) { + samsung_pinctrl_resume_dev(drvdata); + } +} + +#else +#define samsung_pinctrl_suspend NULL +#define samsung_pinctrl_resume NULL +#endif + +static struct syscore_ops samsung_pinctrl_syscore_ops = { + .suspend = samsung_pinctrl_suspend, + .resume = samsung_pinctrl_resume, +}; + static const struct of_device_id samsung_pinctrl_dt_match[] = { #ifdef CONFIG_PINCTRL_EXYNOS { .compatible = "samsung,exynos4210-pinctrl", @@ -987,6 +1127,14 @@ static struct platform_driver samsung_pinctrl_driver = { static int __init samsung_pinctrl_drv_register(void) { + /* + * Register syscore ops for save/restore of registers across suspend. + * It's important to ensure that this driver is running at an earlier + * initcall level than any arch-specific init calls that install syscore + * ops that turn off pad retention (like exynos_pm_resume). + */ + register_syscore_ops(&samsung_pinctrl_syscore_ops); + return platform_driver_register(&samsung_pinctrl_driver); } postcore_initcall(samsung_pinctrl_drv_register); diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index 7c7f9ebcd05b..9f5cc811b8cf 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -127,6 +127,7 @@ struct samsung_pin_bank_type { * @gpio_chip: GPIO chip of the bank. * @grange: linux gpio pin range supported by this bank. * @slock: spinlock protecting bank registers + * @pm_save: saved register values during suspend */ struct samsung_pin_bank { struct samsung_pin_bank_type *type; @@ -144,6 +145,8 @@ struct samsung_pin_bank { struct gpio_chip gpio_chip; struct pinctrl_gpio_range grange; spinlock_t slock; + + u32 pm_save[PINCFG_TYPE_NUM + 1]; /* +1 to handle double CON registers*/ }; /** @@ -189,6 +192,7 @@ struct samsung_pin_ctrl { /** * struct samsung_pinctrl_drv_data: wrapper for holding driver data together. + * @node: global list node * @virt_base: register base address of the controller. * @dev: device instance representing the controller. * @irq: interrpt number used by the controller to notify gpio interrupts. @@ -201,6 +205,7 @@ struct samsung_pin_ctrl { * @nr_function: number of such pin functions. */ struct samsung_pinctrl_drv_data { + struct list_head node; void __iomem *virt_base; struct device *dev; int irq; From ad350cd9d5411353397843c8f410a6e7e84a71f9 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:27 +0200 Subject: [PATCH 121/429] pinctrl: exynos: Add support for set_irq_wake of wake-up EINTs This patch adds support of IRQ wake-up ability configuration for wake-up EINTs on Exynos SoCs. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-exynos.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index ac742817ebce..4f868e59227e 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -326,6 +326,28 @@ static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type) return 0; } +static u32 exynos_eint_wake_mask = 0xffffffff; + +u32 exynos_get_eint_wake_mask(void) +{ + return exynos_eint_wake_mask; +} + +static int exynos_wkup_irq_set_wake(struct irq_data *irqd, unsigned int on) +{ + struct samsung_pin_bank *bank = irq_data_get_irq_chip_data(irqd); + unsigned long bit = 1UL << (2 * bank->eint_offset + irqd->hwirq); + + pr_info("wake %s for irq %d\n", on ? "enabled" : "disabled", irqd->irq); + + if (!on) + exynos_eint_wake_mask |= bit; + else + exynos_eint_wake_mask &= ~bit; + + return 0; +} + /* * irq_chip for wakeup interrupts */ @@ -335,6 +357,7 @@ static struct irq_chip exynos_wkup_irq_chip = { .irq_mask = exynos_wkup_irq_mask, .irq_ack = exynos_wkup_irq_ack, .irq_set_type = exynos_wkup_irq_set_type, + .irq_set_wake = exynos_wkup_irq_set_wake, }; /* interrupt handler for wakeup interrupts 0..15 */ From b134dc3feaa5136b376c7d2658bbe156bea19e63 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:28 +0200 Subject: [PATCH 122/429] ARM: EXYNOS: Fix EINT wake-up mask configuration when pinctrl is used On DT-enabled systems pinctrl-exynos driver is responsible for handling of wake-up EINT interrupts. This patch adjusts wake-up mask configuration code to take wake-up mask value from pinctrl-exynos driver on DT-enabled systems. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij --- arch/arm/mach-exynos/include/mach/pm-core.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h index 7dbbfec13ea5..296090e7f423 100644 --- a/arch/arm/mach-exynos/include/mach/pm-core.h +++ b/arch/arm/mach-exynos/include/mach/pm-core.h @@ -18,8 +18,15 @@ #ifndef __ASM_ARCH_PM_CORE_H #define __ASM_ARCH_PM_CORE_H __FILE__ +#include #include +#ifdef CONFIG_PINCTRL_EXYNOS +extern u32 exynos_get_eint_wake_mask(void); +#else +static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; } +#endif + static inline void s3c_pm_debug_init_uart(void) { /* nothing here yet */ @@ -27,7 +34,12 @@ static inline void s3c_pm_debug_init_uart(void) static inline void s3c_pm_arch_prepare_irqs(void) { - __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); + u32 eintmask = s3c_irqwake_eintmask; + + if (of_have_populated_dt()) + eintmask = exynos_get_eint_wake_mask(); + + __raw_writel(eintmask, S5P_EINT_WAKEUP_MASK); __raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK); } From 97fc463769f1564e8eda2e2f70d3b6e92a25ff16 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 19 May 2013 13:58:37 +0800 Subject: [PATCH 123/429] pinctrl: Don't override the error code in probe error handling Otherwise, we return 0 in probe error paths when gpiochip_remove() returns 0. Also show error message if gpiochip_remove() fails. Signed-off-by: Axel Lin Acked-by: Tony Prisk Acked-by: Maxime Ripard Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-coh901.c | 3 ++- drivers/pinctrl/pinctrl-sunxi.c | 3 ++- drivers/pinctrl/vt8500/pinctrl-wmt.c | 3 +-- 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/pinctrl-coh901.c b/drivers/pinctrl/pinctrl-coh901.c index a67af419f531..d6b41747d687 100644 --- a/drivers/pinctrl/pinctrl-coh901.c +++ b/drivers/pinctrl/pinctrl-coh901.c @@ -830,7 +830,8 @@ static int __init u300_gpio_probe(struct platform_device *pdev) return 0; err_no_range: - err = gpiochip_remove(&gpio->chip); + if (gpiochip_remove(&gpio->chip)) + dev_err(&pdev->dev, "failed to remove gpio chip\n"); err_no_chip: err_no_domain: err_no_port: diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c index c52fc2c08732..c058529db8f6 100644 --- a/drivers/pinctrl/pinctrl-sunxi.c +++ b/drivers/pinctrl/pinctrl-sunxi.c @@ -2000,7 +2000,8 @@ static int sunxi_pinctrl_probe(struct platform_device *pdev) return 0; gpiochip_error: - ret = gpiochip_remove(pctl->chip); + if (gpiochip_remove(pctl->chip)) + dev_err(&pdev->dev, "failed to remove gpio chip\n"); pinctrl_error: pinctrl_unregister(pctl->pctl_dev); return ret; diff --git a/drivers/pinctrl/vt8500/pinctrl-wmt.c b/drivers/pinctrl/vt8500/pinctrl-wmt.c index ab63104e8dc9..70d986e04afb 100644 --- a/drivers/pinctrl/vt8500/pinctrl-wmt.c +++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c @@ -609,8 +609,7 @@ int wmt_pinctrl_probe(struct platform_device *pdev, return 0; fail_range: - err = gpiochip_remove(&data->gpio_chip); - if (err) + if (gpiochip_remove(&data->gpio_chip)) dev_err(&pdev->dev, "failed to remove gpio chip\n"); fail_gpio: pinctrl_unregister(data->pctl_dev); From 21c219933fd123d4cdfc8853f51c41330b9d6c28 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:30 +0200 Subject: [PATCH 124/429] pinctrl: samsung: Add support for SoC-specific suspend/resume callbacks SoC-specific driver might require additional save and restore of registers. This patch adds pair of SoC-specific callbacks per pinctrl device to account for this. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-samsung.c | 6 ++++++ drivers/pinctrl/pinctrl-samsung.h | 3 +++ 2 files changed, 9 insertions(+) diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index 15db2580c145..63ac22e89678 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -1010,6 +1010,9 @@ static void samsung_pinctrl_suspend_dev( reg, bank->pm_save[PINCFG_TYPE_FUNC]); } } + + if (ctrl->suspend) + ctrl->suspend(drvdata); } /** @@ -1026,6 +1029,9 @@ static void samsung_pinctrl_resume_dev(struct samsung_pinctrl_drv_data *drvdata) void __iomem *virt_base = drvdata->virt_base; int i; + if (ctrl->resume) + ctrl->resume(drvdata); + for (i = 0; i < ctrl->nr_banks; i++) { struct samsung_pin_bank *bank = &ctrl->pin_banks[i]; void __iomem *reg = virt_base + bank->pctl_offset; diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index 9f5cc811b8cf..b316d9fe9b6b 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -187,6 +187,9 @@ struct samsung_pin_ctrl { int (*eint_gpio_init)(struct samsung_pinctrl_drv_data *); int (*eint_wkup_init)(struct samsung_pinctrl_drv_data *); + void (*suspend)(struct samsung_pinctrl_drv_data *); + void (*resume)(struct samsung_pinctrl_drv_data *); + char *label; }; From 3385474c3a2f5e81df67cba426c29beefd8a5c18 Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Fri, 17 May 2013 18:24:31 +0200 Subject: [PATCH 125/429] pinctrl: samsung: Allow per-bank SoC-specific private data This patch extends pin bank descriptor structure with SoC-specific private data field that allows SoC-specific drivers to store their own private data. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Tested-by: Doug Anderson Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-samsung.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h index b316d9fe9b6b..26d3519240c9 100644 --- a/drivers/pinctrl/pinctrl-samsung.h +++ b/drivers/pinctrl/pinctrl-samsung.h @@ -139,6 +139,7 @@ struct samsung_pin_bank { u32 eint_mask; u32 eint_offset; char *name; + void *soc_priv; struct device_node *of_node; struct samsung_pinctrl_drv_data *drvdata; struct irq_domain *irq_domain; From 7ccbc60cd9c293304829662b043f4356f554fc3a Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 22 May 2013 16:03:17 +0200 Subject: [PATCH 126/429] pinctrl: exynos: Handle suspend/resume of GPIO EINT registers Some GPIO EINT control registers needs to be preserved across suspend/resume cycle. This patch extends the driver to take care of this. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-exynos.c | 116 ++++++++++++++++++++++++++++++- drivers/pinctrl/pinctrl-exynos.h | 1 + 2 files changed, 114 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 4f868e59227e..2d76f66a2e0b 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -196,6 +196,12 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data) return IRQ_HANDLED; } +struct exynos_eint_gpio_save { + u32 eint_con; + u32 eint_fltcon0; + u32 eint_fltcon1; +}; + /* * exynos_eint_gpio_init() - setup handling of external gpio interrupts. * @d: driver data of samsung pinctrl driver. @@ -204,8 +210,8 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) { struct samsung_pin_bank *bank; struct device *dev = d->dev; - unsigned int ret; - unsigned int i; + int ret; + int i; if (!d->irq) { dev_err(dev, "irq number not available\n"); @@ -227,11 +233,29 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) bank->nr_pins, &exynos_gpio_irqd_ops, bank); if (!bank->irq_domain) { dev_err(dev, "gpio irq domain add failed\n"); - return -ENXIO; + ret = -ENXIO; + goto err_domains; + } + + bank->soc_priv = devm_kzalloc(d->dev, + sizeof(struct exynos_eint_gpio_save), GFP_KERNEL); + if (!bank->soc_priv) { + irq_domain_remove(bank->irq_domain); + ret = -ENOMEM; + goto err_domains; } } return 0; + +err_domains: + for (--i, --bank; i >= 0; --i, --bank) { + if (bank->eint_type != EINT_TYPE_GPIO) + continue; + irq_domain_remove(bank->irq_domain); + } + + return ret; } static void exynos_wkup_irq_unmask(struct irq_data *irqd) @@ -528,6 +552,72 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) return 0; } +static void exynos_pinctrl_suspend_bank( + struct samsung_pinctrl_drv_data *drvdata, + struct samsung_pin_bank *bank) +{ + struct exynos_eint_gpio_save *save = bank->soc_priv; + void __iomem *regs = drvdata->virt_base; + + save->eint_con = readl(regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset); + save->eint_fltcon0 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset); + save->eint_fltcon1 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset + 4); + + pr_debug("%s: save con %#010x\n", bank->name, save->eint_con); + pr_debug("%s: save fltcon0 %#010x\n", bank->name, save->eint_fltcon0); + pr_debug("%s: save fltcon1 %#010x\n", bank->name, save->eint_fltcon1); +} + +static void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; + int i; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) + if (bank->eint_type == EINT_TYPE_GPIO) + exynos_pinctrl_suspend_bank(drvdata, bank); +} + +static void exynos_pinctrl_resume_bank( + struct samsung_pinctrl_drv_data *drvdata, + struct samsung_pin_bank *bank) +{ + struct exynos_eint_gpio_save *save = bank->soc_priv; + void __iomem *regs = drvdata->virt_base; + + pr_debug("%s: con %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset), save->eint_con); + pr_debug("%s: fltcon0 %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset), save->eint_fltcon0); + pr_debug("%s: fltcon1 %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset + 4), save->eint_fltcon1); + + writel(save->eint_con, regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset); + writel(save->eint_fltcon0, regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset); + writel(save->eint_fltcon1, regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset + 4); +} + +static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; + int i; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) + if (bank->eint_type == EINT_TYPE_GPIO) + exynos_pinctrl_resume_bank(drvdata, bank); +} + /* pin banks of exynos4210 pin-controller 0 */ static struct samsung_pin_bank exynos4210_pin_banks0[] = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), @@ -591,6 +681,8 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4210-gpio-ctrl0", }, { /* pin-controller instance 1 data */ @@ -605,6 +697,8 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4210-gpio-ctrl1", }, { /* pin-controller instance 2 data */ @@ -686,6 +780,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl0", }, { /* pin-controller instance 1 data */ @@ -700,6 +796,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl1", }, { /* pin-controller instance 2 data */ @@ -710,6 +808,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl2", }, { /* pin-controller instance 3 data */ @@ -720,6 +820,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl3", }, }; @@ -798,6 +900,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl0", }, { /* pin-controller instance 1 data */ @@ -808,6 +912,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl1", }, { /* pin-controller instance 2 data */ @@ -818,6 +924,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl2", }, { /* pin-controller instance 3 data */ @@ -828,6 +936,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl3", }, }; diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index 9b1f77a5bf0f..3c91c357792f 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -19,6 +19,7 @@ /* External GPIO and wakeup interrupt related definitions */ #define EXYNOS_GPIO_ECON_OFFSET 0x700 +#define EXYNOS_GPIO_EFLTCON_OFFSET 0x800 #define EXYNOS_GPIO_EMASK_OFFSET 0x900 #define EXYNOS_GPIO_EPEND_OFFSET 0xA00 #define EXYNOS_WKUP_ECON_OFFSET 0xE00 From d72f88a42bf9761e3a92e58879d25a65712ca87a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 23 May 2013 17:32:14 +0800 Subject: [PATCH 127/429] pinctrl: sunxi: fix error return code in sunxi_pinctrl_probe() Fix to return a negative error code from the devm_clk_get() error handling case instead of 0, as done elsewhere in this function. Introduced by commit 950707c0eb5c7aeaa2c446a04c824f4be686d2f6 (pinctrl: sunxi: add clock support) Signed-off-by: Wei Yongjun Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-sunxi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c index c058529db8f6..b7d8c890514c 100644 --- a/drivers/pinctrl/pinctrl-sunxi.c +++ b/drivers/pinctrl/pinctrl-sunxi.c @@ -1990,8 +1990,10 @@ static int sunxi_pinctrl_probe(struct platform_device *pdev) } clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); goto gpiochip_error; + } clk_prepare_enable(clk); From a386267a2ceea33d76fa2b7f1c2e72a858fcb68e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 27 May 2013 15:53:32 +0200 Subject: [PATCH 128/429] pinctrl: pinconf: take the right mutex The pinconf_dgb_config_print() takes the per-pincontroller mutex, when what it wants to take is actually the pin maps mutex. Reported-by: James Hogan Cc: Patrice Chotard Signed-off-by: Linus Walleij --- drivers/pinctrl/pinconf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index c67c37e23dd7..694c3ace4520 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -610,7 +610,7 @@ static int pinconf_dbg_config_print(struct seq_file *s, void *d) bool found = false; unsigned long config; - mutex_lock(&pctldev->mutex); + mutex_lock(&pinctrl_maps_mutex); /* Parse the pinctrl map and look for the elected pin/state */ for_each_maps(maps_node, i, map) { @@ -659,7 +659,7 @@ static int pinconf_dbg_config_print(struct seq_file *s, void *d) confops->pin_config_config_dbg_show(pctldev, s, config); exit: - mutex_unlock(&pctldev->mutex); + mutex_unlock(&pinctrl_maps_mutex); return 0; } From 9ecb41bd8cf002fd8f3e063db4df81647ddd623c Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Mon, 27 May 2013 16:03:40 +0200 Subject: [PATCH 129/429] dmaengine: ste_dma40: fix pm runtime ref counting The pm runtime reference counting of the driver is broken for the case when there is more than one transfer queued, leading to the device being runtime suspend while active. Fix it. Signed-off-by: Rabin Vincent Acked-by: Linus Walleij Cc: stable@vger.kernel.org Signed-off-by: Vinod Koul --- drivers/dma/ste_dma40.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 1734feec47b1..71bf4ec300ea 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -1566,10 +1566,12 @@ static void dma_tc_handle(struct d40_chan *d40c) return; } - if (d40_queue_start(d40c) == NULL) + if (d40_queue_start(d40c) == NULL) { d40c->busy = false; - pm_runtime_mark_last_busy(d40c->base->dev); - pm_runtime_put_autosuspend(d40c->base->dev); + + pm_runtime_mark_last_busy(d40c->base->dev); + pm_runtime_put_autosuspend(d40c->base->dev); + } d40_desc_remove(d40d); d40_desc_done(d40c, d40d); From de614e561b9c633073caae8f86399aa8923ef85d Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Tue, 21 May 2013 17:09:41 +0300 Subject: [PATCH 130/429] crypto: sha256_ssse3 - fix stack corruption with SSSE3 and AVX implementations The _XFER stack element size was set too small, 8 bytes, when it needs to be 16 bytes. As _XFER is the last stack element used by these implementations, the 16 byte stores with 'movdqa' corrupt the stack where the value of register %r12 is temporarily stored. As these implementations align the stack pointer to 16 bytes, this corruption did not happen every time. Patch corrects this issue. Reported-by: Julian Wollrath Signed-off-by: Jussi Kivilinna Tested-by: Julian Wollrath Acked-by: Tim Chen Signed-off-by: Herbert Xu --- arch/x86/crypto/sha256-avx-asm.S | 2 +- arch/x86/crypto/sha256-ssse3-asm.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/crypto/sha256-avx-asm.S b/arch/x86/crypto/sha256-avx-asm.S index 56610c4bf31b..642f15687a0a 100644 --- a/arch/x86/crypto/sha256-avx-asm.S +++ b/arch/x86/crypto/sha256-avx-asm.S @@ -118,7 +118,7 @@ y2 = %r15d _INP_END_SIZE = 8 _INP_SIZE = 8 -_XFER_SIZE = 8 +_XFER_SIZE = 16 _XMM_SAVE_SIZE = 0 _INP_END = 0 diff --git a/arch/x86/crypto/sha256-ssse3-asm.S b/arch/x86/crypto/sha256-ssse3-asm.S index 98d3c391da81..f833b74d902b 100644 --- a/arch/x86/crypto/sha256-ssse3-asm.S +++ b/arch/x86/crypto/sha256-ssse3-asm.S @@ -111,7 +111,7 @@ y2 = %r15d _INP_END_SIZE = 8 _INP_SIZE = 8 -_XFER_SIZE = 8 +_XFER_SIZE = 16 _XMM_SAVE_SIZE = 0 _INP_END = 0 From 9a9c56cb34e65000d1f0a4b7553399bfcf7c5a52 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Sun, 26 May 2013 21:31:28 +0000 Subject: [PATCH 131/429] net: phy: fix a bug when verify the EEE support The phy_init_eee has to exit with an error when the local device and its link partner both do not support EEE. So this patch fixes a problem when verify this. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index c14f14741b3f..38f0b312ff85 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -1044,7 +1044,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv); lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp); idx = phy_find_setting(phydev->speed, phydev->duplex); - if ((lp & adv & settings[idx].setting)) + if (!(lp & adv & settings[idx].setting)) goto eee_exit; if (clk_stop_enable) { From f96ef988cc603487c03a6de07807b06cbe641829 Mon Sep 17 00:00:00 2001 From: Michal Kubecek Date: Tue, 28 May 2013 08:26:49 +0200 Subject: [PATCH 132/429] ipv4: fix redirect handling for TCP packets Unlike ipv4_redirect() and ipv4_sk_redirect(), ip_do_redirect() doesn't call __build_flow_key() directly but via ip_rt_build_flow_key() wrapper. This leads to __build_flow_key() getting pointer to IPv4 header of the ICMP redirect packet rather than pointer to the embedded IPv4 header of the packet initiating the redirect. As a result, handling of ICMP redirects initiated by TCP packets is broken. Issue was introduced by 4895c771c ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Michal Kubecek Signed-off-by: David S. Miller --- net/ipv4/route.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 550781a17b34..d35bbf0cf404 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -737,10 +737,15 @@ static void ip_do_redirect(struct dst_entry *dst, struct sock *sk, struct sk_buf { struct rtable *rt; struct flowi4 fl4; + const struct iphdr *iph = (const struct iphdr *) skb->data; + int oif = skb->dev->ifindex; + u8 tos = RT_TOS(iph->tos); + u8 prot = iph->protocol; + u32 mark = skb->mark; rt = (struct rtable *) dst; - ip_rt_build_flow_key(&fl4, sk, skb); + __build_flow_key(&fl4, sk, iph, oif, tos, prot, mark, 0); __ip_do_redirect(rt, skb, &fl4, true); } From c89b65e7fffef745bdd36c372aa0dea778fecbab Mon Sep 17 00:00:00 2001 From: Andrew Jones Date: Mon, 27 May 2013 15:58:04 +0200 Subject: [PATCH 133/429] qxl: fix Kconfig deps - select FB_DEFERRED_IO Signed-off-by: Andrew Jones Signed-off-by: Dave Airlie --- drivers/gpu/drm/qxl/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/qxl/Kconfig b/drivers/gpu/drm/qxl/Kconfig index 2f1a57e11140..d6c12796023c 100644 --- a/drivers/gpu/drm/qxl/Kconfig +++ b/drivers/gpu/drm/qxl/Kconfig @@ -4,6 +4,7 @@ config DRM_QXL select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT + select FB_DEFERRED_IO select DRM_KMS_HELPER select DRM_TTM help From 2938d2757fc99c26aa678ce4eba910c4a77c3a55 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 28 May 2013 09:33:01 +0200 Subject: [PATCH 134/429] tick: Cure broadcast false positive pending bit warning commit 26517f3e (tick: Avoid programming the local cpu timer if broadcast pending) added a warning if the cpu enters broadcast mode again while the pending bit is still set. Meelis reported that the warning triggers. There are two corner cases which have been not considered: 1) cpuidle calls clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER) twice. That can result in the following scenario CPU0 CPU1 cpuidle_idle_call() clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER) set cpu in tick_broadcast_oneshot_mask broadcast interrupt event expired for cpu1 set pending bit acpi_idle_enter_simple() clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER) WARN_ON(pending bit) Move the WARN_ON into the section where we enter broadcast mode so it wont provide false positives on the second call. 2) safe_halt() enables interrupts, so a broadcast interrupt can be delivered befor the broadcast mode is disabled. That sets the pending bit for the CPU which receives the broadcast interrupt. Though the interrupt is delivered right away from the broadcast handler and leaves the pending bit stale. Clear the pending bit for the current cpu in the broadcast handler. Reported-and-tested-by: Meelis Roos Cc: Len Brown Cc: Frederic Weisbecker Cc: Borislav Petkov Cc: Rafael J. Wysocki Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305271841130.4220@ionos Signed-off-by: Thomas Gleixner --- kernel/time/tick-broadcast.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 24938d577669..0c739423b0f9 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -511,6 +511,12 @@ again: } } + /* + * Remove the current cpu from the pending mask. The event is + * delivered immediately in tick_do_broadcast() ! + */ + cpumask_clear_cpu(smp_processor_id(), tick_broadcast_pending_mask); + /* Take care of enforced broadcast requests */ cpumask_or(tmpmask, tmpmask, tick_broadcast_force_mask); cpumask_clear(tick_broadcast_force_mask); @@ -575,8 +581,8 @@ void tick_broadcast_oneshot_control(unsigned long reason) raw_spin_lock_irqsave(&tick_broadcast_lock, flags); if (reason == CLOCK_EVT_NOTIFY_BROADCAST_ENTER) { - WARN_ON_ONCE(cpumask_test_cpu(cpu, tick_broadcast_pending_mask)); if (!cpumask_test_and_set_cpu(cpu, tick_broadcast_oneshot_mask)) { + WARN_ON_ONCE(cpumask_test_cpu(cpu, tick_broadcast_pending_mask)); clockevents_set_mode(dev, CLOCK_EVT_MODE_SHUTDOWN); /* * We only reprogram the broadcast timer if we From 37c14e83ee173cc3f6310d80f00f2e588c402b61 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 28 May 2013 10:22:06 +0200 Subject: [PATCH 135/429] m68k: Update defconfigs for v3.9 Signed-off-by: Geert Uytterhoeven --- arch/m68k/configs/amiga_defconfig | 230 +++++++++++++++++------ arch/m68k/configs/apollo_defconfig | 215 ++++++++++++++++------ arch/m68k/configs/atari_defconfig | 227 +++++++++++++++++------ arch/m68k/configs/bvme6000_defconfig | 217 ++++++++++++++++------ arch/m68k/configs/hp300_defconfig | 214 ++++++++++++++++------ arch/m68k/configs/mac_defconfig | 234 +++++++++++++++++------- arch/m68k/configs/multi_defconfig | 264 +++++++++++++++++++-------- arch/m68k/configs/mvme147_defconfig | 215 ++++++++++++++++------ arch/m68k/configs/mvme16x_defconfig | 216 ++++++++++++++++------ arch/m68k/configs/q40_defconfig | 229 +++++++++++++++++------ arch/m68k/configs/sun3_defconfig | 209 +++++++++++++++------ arch/m68k/configs/sun3x_defconfig | 210 +++++++++++++++------ 12 files changed, 1982 insertions(+), 698 deletions(-) diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 90d3109c82f4..19325e117eea 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,55 +1,78 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-amiga" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_AMIGA=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m +CONFIG_AMIGA=y CONFIG_ZORRO=y CONFIG_AMIGA_PCMCIA=y -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_ZORRO_NAMES=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -57,25 +80,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -86,6 +121,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -99,22 +136,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -124,7 +170,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -133,18 +178,30 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_PARPORT=m CONFIG_PARPORT_AMIGA=m @@ -154,11 +211,13 @@ CONFIG_AMIGA_FLOPPY=y CONFIG_AMIGA_Z2RAM=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_GAYLE=y CONFIG_BLK_DEV_BUDDHA=y @@ -172,57 +231,77 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_A3000_SCSI=y CONFIG_A2091_SCSI=y CONFIG_GVP11_SCSI=y CONFIG_SCSI_A4000T=y CONFIG_SCSI_ZORRO7XX=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y -CONFIG_ARIADNE=y +# CONFIG_NET_VENDOR_3COM is not set CONFIG_A2065=y +CONFIG_ARIADNE=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FUJITSU is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set CONFIG_HYDRA=y -CONFIG_ZORRO8390=y CONFIG_APNE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_ZORRO8390=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m CONFIG_KEYBOARD_AMIGA=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set @@ -233,11 +312,14 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m # CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_PRINTER=m # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_CIRRUS=y @@ -252,48 +334,64 @@ CONFIG_SOUND=m CONFIG_DMASOUND_PAULA=m CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_RP5C01=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_SERIAL_CONSOLE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -332,10 +430,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -345,19 +456,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -373,6 +481,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 8f4f657fdbc6..14dc6ccda7f4 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,55 +1,76 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-apollo" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_APOLLO=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y +CONFIG_APOLLO=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -57,25 +78,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -86,6 +119,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -99,22 +134,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -124,7 +168,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -133,21 +176,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -162,57 +218,74 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -221,47 +294,61 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -300,10 +387,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -313,19 +413,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -341,6 +438,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 4571d33903fe..6d5370c914b2 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,53 +1,75 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-atari" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_ATARI=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y +CONFIG_ATARI=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_STRAM_PROC=y -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -55,25 +77,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -84,6 +118,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -97,22 +133,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -122,7 +167,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -131,18 +175,30 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_PARPORT=m CONFIG_PARPORT_ATARI=m @@ -150,11 +206,13 @@ CONFIG_PARPORT_1284=y CONFIG_ATARI_FLOPPY=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_FALCON_IDE=y CONFIG_RAID_ATTRS=m @@ -167,63 +225,81 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_ATARI_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m -CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_VETH=m CONFIG_ATARILANCE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m CONFIG_KEYBOARD_ATARI=y # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_ATARI=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_PRINTER=m # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_ATARI=y @@ -233,47 +309,64 @@ CONFIG_SOUND=m CONFIG_DMASOUND_ATARI=m CONFIG_HID=m CONFIG_HIDRAW=y -# CONFIG_USB_SUPPORT is not set +CONFIG_UHID=m +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y +CONFIG_NATFEAT=y +CONFIG_NFBLOCK=y +CONFIG_NFCON=y +CONFIG_NFETH=y CONFIG_ATARI_DSP56K=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -312,10 +405,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -325,19 +431,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -353,6 +456,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=y CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index 12f211733ba0..c015ddb6fd80 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,53 +1,74 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-bvme6000" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_VME=y -CONFIG_BVME6000=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68040=y CONFIG_M68060=y +CONFIG_VME=y +CONFIG_BVME6000=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -55,25 +76,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -84,6 +117,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -97,22 +132,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -122,7 +166,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -131,21 +174,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -160,103 +216,131 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_BVME6000_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_BVME6000_NET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -295,10 +379,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -308,19 +405,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -336,7 +430,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y -CONFIG_CRC32=m +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 215389a5407f..ec7382d8afff 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,54 +1,76 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-hp300" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_HP300=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y CONFIG_M68060=y +CONFIG_HP300=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -56,25 +78,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -85,6 +119,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -98,22 +134,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -123,7 +168,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -132,21 +176,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -161,59 +218,77 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_HPLANCE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_INPUT_MISC=y CONFIG_HP_SDC_RTC=m -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=m CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -222,47 +297,60 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -301,10 +389,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -314,19 +415,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -342,6 +440,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index cb9dfb30b674..7d46fbec7042 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,49 +1,75 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-mac" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_MAC=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68020=y CONFIG_M68030=y CONFIG_M68040=y +CONFIG_M68KFPU_EMU=y +CONFIG_MAC=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -51,25 +77,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -80,6 +118,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -93,22 +133,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -118,7 +167,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -127,31 +175,45 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m -CONFIG_BLK_DEV_SWIM=y +CONFIG_BLK_DEV_SWIM=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_MAC_IDE=y CONFIG_RAID_ATTRS=m @@ -164,29 +226,30 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MAC_SCSI=y CONFIG_SCSI_MAC_ESP=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_ADB=y CONFIG_ADB_MACII=y -CONFIG_ADB_MACIISI=y CONFIG_ADB_IOP=y CONFIG_ADB_PMU68K=y CONFIG_ADB_CUDA=y @@ -194,46 +257,61 @@ CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y -CONFIG_MAC8390=y -CONFIG_MAC89x0=m -CONFIG_MACSONIC=m CONFIG_MACMACE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +CONFIG_MAC89x0=y +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +CONFIG_MACSONIC=y +CONFIG_MAC8390=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_PMACZILOG=y CONFIG_SERIAL_PMACZILOG_TTYS=y CONFIG_SERIAL_PMACZILOG_CONSOLE=y # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_VALKYRIE=y @@ -242,46 +320,60 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m -CONFIG_HFS_FS=y -CONFIG_HFSPLUS_FS=y +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y +CONFIG_NFS_FS=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -320,10 +412,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -333,19 +438,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -361,6 +463,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 8d5def4a31e0..0f795d8e65fa 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -1,15 +1,29 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-multi" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m +CONFIG_M68020=y +CONFIG_M68040=y +CONFIG_M68060=y +CONFIG_M68KFPU_EMU=y CONFIG_AMIGA=y CONFIG_ATARI=y CONFIG_MAC=y @@ -21,48 +35,50 @@ CONFIG_BVME6000=y CONFIG_HP300=y CONFIG_SUN3X=y CONFIG_Q40=y -CONFIG_M68020=y -CONFIG_M68040=y -CONFIG_M68060=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m CONFIG_ZORRO=y CONFIG_AMIGA_PCMCIA=y -CONFIG_STRAM_PROC=y -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_ZORRO_NAMES=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -70,25 +86,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -99,6 +127,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -112,22 +142,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -137,7 +176,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -146,22 +184,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_PARPORT=m CONFIG_PARPORT_AMIGA=m @@ -170,15 +220,17 @@ CONFIG_PARPORT_ATARI=m CONFIG_PARPORT_1284=y CONFIG_AMIGA_FLOPPY=y CONFIG_ATARI_FLOPPY=y -CONFIG_BLK_DEV_SWIM=y +CONFIG_BLK_DEV_SWIM=m CONFIG_AMIGA_Z2RAM=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_GAYLE=y CONFIG_BLK_DEV_BUDDHA=y @@ -195,11 +247,9 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_A3000_SCSI=y CONFIG_A2091_SCSI=y CONFIG_GVP11_SCSI=y @@ -213,21 +263,24 @@ CONFIG_MVME16x_SCSI=y CONFIG_BVME6000_SCSI=y CONFIG_SUN3X_ESP=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_ADB=y CONFIG_ADB_MACII=y -CONFIG_ADB_MACIISI=y CONFIG_ADB_IOP=y CONFIG_ADB_PMU68K=y CONFIG_ADB_CUDA=y @@ -235,49 +288,64 @@ CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m -CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_ARIADNE=y +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_VETH=m +# CONFIG_NET_VENDOR_3COM is not set CONFIG_A2065=y -CONFIG_HYDRA=y -CONFIG_ZORRO8390=y -CONFIG_APNE=y -CONFIG_MAC8390=y -CONFIG_MAC89x0=y -CONFIG_MACSONIC=y -CONFIG_MACMACE=y -CONFIG_MVME147_NET=y -CONFIG_MVME16x_NET=y -CONFIG_BVME6000_NET=y +CONFIG_ARIADNE=y CONFIG_ATARILANCE=y -CONFIG_SUN3LANCE=y CONFIG_HPLANCE=y +CONFIG_MVME147_NET=y +CONFIG_SUN3LANCE=y +CONFIG_MACMACE=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +CONFIG_MAC89x0=y +# CONFIG_NET_VENDOR_FUJITSU is not set +# CONFIG_NET_VENDOR_HP is not set +CONFIG_BVME6000_NET=y +CONFIG_MVME16x_NET=y +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +CONFIG_MACSONIC=y +CONFIG_HYDRA=y +CONFIG_MAC8390=y CONFIG_NE2000=m -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_APNE=y +CONFIG_ZORRO8390=y +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m CONFIG_KEYBOARD_AMIGA=y CONFIG_KEYBOARD_ATARI=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_AMIGA=m CONFIG_MOUSE_ATARI=m @@ -285,18 +353,20 @@ CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_AMIGA=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m -CONFIG_HP_SDC_RTC=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_HP_SDC_RTC=m CONFIG_SERIO_Q40KBD=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set CONFIG_SERIAL_PMACZILOG=y CONFIG_SERIAL_PMACZILOG_TTYS=y CONFIG_SERIAL_PMACZILOG_CONSOLE=y CONFIG_PRINTER=m # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_CIRRUS=y @@ -316,7 +386,20 @@ CONFIG_DMASOUND_PAULA=m CONFIG_DMASOUND_Q40=m CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y +CONFIG_NATFEAT=y +CONFIG_NFBLOCK=y +CONFIG_NFCON=y +CONFIG_NFETH=y CONFIG_ATARI_DSP56K=m CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_SERIAL_CONSOLE=y @@ -324,42 +407,49 @@ CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m -CONFIG_HFS_FS=y -CONFIG_HFSPLUS_FS=y +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -398,10 +488,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -411,19 +514,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -439,6 +539,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=y CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index e2af46f530c1..5586c6529fce 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,52 +1,73 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-mvme147" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m +CONFIG_M68030=y CONFIG_VME=y CONFIG_MVME147=y -CONFIG_M68030=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -54,25 +75,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -83,6 +116,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -96,22 +131,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -121,7 +165,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -130,21 +173,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -159,103 +215,132 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MVME147_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_MVME147_NET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -294,10 +379,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -307,19 +405,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -335,6 +430,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 7c9402b2097f..e5e8262bbacd 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,53 +1,74 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-mvme16x" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_VME=y -CONFIG_MVME16x=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68040=y CONFIG_M68060=y +CONFIG_VME=y +CONFIG_MVME16x=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -55,25 +76,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -84,6 +117,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -97,22 +132,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -122,7 +166,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -131,21 +174,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -160,103 +216,131 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MVME16x_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_MVME16x_NET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set +# CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -295,10 +379,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -308,19 +405,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -336,6 +430,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 19d23db690a4..8982370e8b42 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,49 +1,74 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-q40" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_Q40=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_SUN_PARTITION=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_M68040=y CONFIG_M68060=y +CONFIG_Q40=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_HEARTBEAT=y -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -51,25 +76,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -80,6 +117,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -93,22 +132,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -118,7 +166,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -127,26 +174,40 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y +CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_Q40IDE=y CONFIG_RAID_ATTRS=m @@ -159,61 +220,82 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FUJITSU is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set CONFIG_NE2000=m -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m -CONFIG_SERIO=m -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_Q40KBD=m +CONFIG_SERIO_Q40KBD=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y @@ -222,46 +304,61 @@ CONFIG_SOUND=m CONFIG_DMASOUND_Q40=m CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_HEARTBEAT=y +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -300,10 +397,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -313,19 +423,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -341,6 +448,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index ca6c0b4cab77..54674d61e001 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,50 +1,71 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-sun3" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_SUN3=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -52,25 +73,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -81,6 +114,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -94,22 +129,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -119,7 +163,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -128,21 +171,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -157,107 +213,136 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_SUN3_SCSI=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_SUN3LANCE=y +# CONFIG_NET_CADENCE is not set CONFIG_SUN3_82586=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -296,10 +381,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -309,19 +407,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -337,6 +432,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index c80941c7759e..832d9539f441 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,50 +1,71 @@ -CONFIG_EXPERIMENTAL=y CONFIG_LOCALVERSION="-sun3x" CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_BSD_PROCESS_ACCT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_RELAY=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_EFI_PARTITION is not set +CONFIG_SYSV68_PARTITION=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_SUN3X=y +# CONFIG_COMPACTION is not set +CONFIG_CLEANCACHE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m -CONFIG_PROC_HARDWARE=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_XFRM_MIGRATE=y CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IPGRE=m CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m +CONFIG_INET_UDP_DIAG=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_ZONES=y +# CONFIG_NF_CONNTRACK_PROCFS is not set # CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_UDPLITE=m CONFIG_NF_CONNTRACK_AMANDA=m @@ -52,25 +73,37 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NETFILTER_XT_SET=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m @@ -81,6 +114,8 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -94,22 +129,31 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -119,7 +163,6 @@ CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -128,21 +171,34 @@ CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m +CONFIG_NF_NAT_IPV6=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m CONFIG_IP_DCCP=m # CONFIG_IP_DCCP_CCID3 is not set +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_L2TP=m CONFIG_ATALK=m +CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_DAT=y +# CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FW_LOADER_USER_HELPER is not set CONFIG_CONNECTOR=m CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m @@ -157,106 +213,136 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SAS_LIBSAS=m -# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_SCSI_SAS_ATTRS=m CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_SUN3X_ESP=y CONFIG_MD=y -CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID456=m CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m CONFIG_DM_MIRROR=m +CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_UEVENT=y +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m CONFIG_NETDEVICES=y CONFIG_DUMMY=m -CONFIG_MACVLAN=m CONFIG_EQUALIZER=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_VXLAN=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m -CONFIG_NET_ETHERNET=y CONFIG_SUN3LANCE=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=m # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_MOUSE_SERIAL=m -# CONFIG_SERIO_SERPORT is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set # CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=m -CONFIG_GEN_RTC_X=y +CONFIG_NTP_PPS=y +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PTP_1588_CLOCK=m # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_HID=m CONFIG_HIDRAW=y +CONFIG_UHID=m +# CONFIG_HID_GENERIC is not set # CONFIG_USB_SUPPORT is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GENERIC=m +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PROC_HARDWARE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_REISERFS_FS=m CONFIG_JFS_FS=m CONFIG_XFS_FS=m CONFIG_OCFS2_FS=m -# CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set +CONFIG_FANOTIFY=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set -CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +CONFIG_CUSE=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=m +CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m -CONFIG_MINIX_FS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_QNX6FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m CONFIG_NFSD_V3=y -CONFIG_SMB_FS=m -CONFIG_SMB_NLS_DEFAULT=y +CONFIG_CIFS=m +# CONFIG_CIFS_DEBUG is not set CONFIG_CODA_FS=m CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m @@ -295,10 +381,23 @@ CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m CONFIG_DLM=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_ENCRYPTED_KEYS=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m @@ -308,19 +407,16 @@ CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m @@ -336,6 +432,14 @@ CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m # CONFIG_CRYPTO_HW is not set -CONFIG_CRC16=m CONFIG_CRC_T10DIF=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_TEST=m From d5b4c2f4938aaebc392669111385c3cf50dd309f Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 27 May 2013 17:55:13 +0800 Subject: [PATCH 136/429] arch: s390: appldata: using strncpy() and strnlen() instead of sprintf() 'buf[2]' is 2 bytes length, and sprintf() will append '\0' at the end of string "?\n", so original implementation is memory overflow. Need use strncpy() and strnlen() instead of sprintf(). Signed-off-by: Chen Gang Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/appldata/appldata_base.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index bae0f402bf2a..87a22092b68f 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -212,7 +212,9 @@ appldata_timer_handler(ctl_table *ctl, int write, return 0; } if (!write) { - len = sprintf(buf, appldata_timer_active ? "1\n" : "0\n"); + strncpy(buf, appldata_timer_active ? "1\n" : "0\n", + ARRAY_SIZE(buf)); + len = strnlen(buf, ARRAY_SIZE(buf)); if (len > *lenp) len = *lenp; if (copy_to_user(buffer, buf, len)) @@ -317,7 +319,8 @@ appldata_generic_handler(ctl_table *ctl, int write, return 0; } if (!write) { - len = sprintf(buf, ops->active ? "1\n" : "0\n"); + strncpy(buf, ops->active ? "1\n" : "0\n", ARRAY_SIZE(buf)); + len = strnlen(buf, ARRAY_SIZE(buf)); if (len > *lenp) len = *lenp; if (copy_to_user(buffer, buf, len)) { From 15ef0298deb3929eb6ad6d2334fd2059fd53807c Mon Sep 17 00:00:00 2001 From: Pavel Tikhomirov Date: Fri, 17 May 2013 02:12:03 +0400 Subject: [PATCH 137/429] posix-timers: Show clock ID in proc file Expand information about posix-timers in /proc//timers by adding info about clock, with which the timer was created. I.e. in the forth line of timer info after "notify:" line go "ClockID: ". Signed-off-by: Pavel Tikhomirov Cc: Michael Kerrisk Cc: Matthew Helsley Cc: Pavel Emelyanov Link: http://lkml.kernel.org/r/1368742323-46949-2-git-send-email-snorcht@gmail.com Signed-off-by: Thomas Gleixner --- fs/proc/base.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/proc/base.c b/fs/proc/base.c index dd51e50001fe..c3834dad09b3 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2118,6 +2118,7 @@ static int show_timer(struct seq_file *m, void *v) nstr[notify & ~SIGEV_THREAD_ID], (notify & SIGEV_THREAD_ID) ? "tid" : "pid", pid_nr_ns(timer->it_pid, tp->ns)); + seq_printf(m, "ClockID: %d\n", timer->it_clock); return 0; } From b56433cb782d1cc7e44fc46d2ce3917fa75d2236 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Mon, 27 May 2013 16:19:55 +0200 Subject: [PATCH 138/429] s390/pgtable: Fix check for pgste/storage key handling pte_present might return true on PAGE_TYPE_NONE, even if the invalid bit is on. Modify the existing check of the pgste functions to avoid crashes. [ Martin Schwidefsky: added ptep_modify_prot_[start|commit] bits ] Reported-by: Martin Schwidefky Signed-off-by: Christian Borntraeger CC: stable@vger.kernel.org Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/pgtable.h | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 0f0de30e3e3f..ac01463038f1 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -646,7 +646,7 @@ static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) unsigned long address, bits; unsigned char skey; - if (!pte_present(*ptep)) + if (pte_val(*ptep) & _PAGE_INVALID) return pgste; address = pte_val(*ptep) & PAGE_MASK; skey = page_get_storage_key(address); @@ -680,7 +680,7 @@ static inline pgste_t pgste_update_young(pte_t *ptep, pgste_t pgste) #ifdef CONFIG_PGSTE int young; - if (!pte_present(*ptep)) + if (pte_val(*ptep) & _PAGE_INVALID) return pgste; /* Get referenced bit from storage key */ young = page_reset_referenced(pte_val(*ptep) & PAGE_MASK); @@ -706,7 +706,7 @@ static inline void pgste_set_key(pte_t *ptep, pgste_t pgste, pte_t entry) unsigned long address; unsigned long okey, nkey; - if (!pte_present(entry)) + if (pte_val(entry) & _PAGE_INVALID) return; address = pte_val(entry) & PAGE_MASK; okey = nkey = page_get_storage_key(address); @@ -1098,6 +1098,9 @@ static inline pte_t ptep_modify_prot_start(struct mm_struct *mm, pte = *ptep; if (!mm_exclusive(mm)) __ptep_ipte(address, ptep); + + if (mm_has_pgste(mm)) + pgste = pgste_update_all(&pte, pgste); return pte; } @@ -1105,9 +1108,13 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm, unsigned long address, pte_t *ptep, pte_t pte) { + pgste_t pgste; + if (mm_has_pgste(mm)) { + pgste = *(pgste_t *)(ptep + PTRS_PER_PTE); + pgste_set_key(ptep, pgste, pte); pgste_set_pte(ptep, pte); - pgste_set_unlock(ptep, *(pgste_t *)(ptep + PTRS_PER_PTE)); + pgste_set_unlock(ptep, pgste); } else *ptep = pte; } From 1d7004f0593f631b78745e4c835d8e09b31f4996 Mon Sep 17 00:00:00 2001 From: Frederico Cadete Date: Sat, 25 May 2013 22:48:57 +0200 Subject: [PATCH 139/429] xmem/tmem: fix 'undefined variable' build error. In the (not so useful) kernel configuration where CONFIG_SWAP is undefined and CONFIG_XEN_SELFBALLOONING is defined, xen_tmem_init would use undefined variable 'static bool frontswap'. Added #else to have #define frontswap (0) in the case where CONFIG_FRONTSWAP is not defined. Signed-off-by: Frederico Cadete Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/tmem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/xen/tmem.c b/drivers/xen/tmem.c index 18e8bd8fa947..cc072c66c766 100644 --- a/drivers/xen/tmem.c +++ b/drivers/xen/tmem.c @@ -41,6 +41,8 @@ module_param(selfballooning, bool, S_IRUGO); #ifdef CONFIG_FRONTSWAP static bool frontswap __read_mostly = true; module_param(frontswap, bool, S_IRUGO); +#else /* CONFIG_FRONTSWAP */ +#define frontswap (0) #endif /* CONFIG_FRONTSWAP */ #ifdef CONFIG_XEN_SELFBALLOONING From d3134e211e8db7fa833c40b5879fc022693e16c2 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 28 May 2013 15:41:57 +0530 Subject: [PATCH 140/429] ASoC: wm8994: use the correct pointer to get the control value Signed-off-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 1eb152cb1097..62dc30598084 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1031,7 +1031,7 @@ static int aif1clk_ev(struct snd_soc_dapm_widget *w, { struct snd_soc_codec *codec = w->codec; struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); - struct wm8994 *control = codec->control_data; + struct wm8994 *control = wm8994->wm8994; int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA; int i; int dac; From 9767a58b8b2a0b153c246fb6306c7d48d51bb379 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 28 May 2013 12:52:08 +0100 Subject: [PATCH 141/429] ASoC: wm8994: Fix reporting of accessory removal on WM8958 During recent refactoring the code to report removal when MICDET reports an absent microphone was removed, causing problems for systems which rely solely on the MICDET for this functionality. Restore it. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 62dc30598084..b38382cc4b59 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -3833,6 +3833,11 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data) dev_dbg(codec->dev, "Ignoring removed jack\n"); return IRQ_HANDLED; } + } else if (!(reg & WM8958_MICD_STS)) { + snd_soc_jack_report(wm8994->micdet[0].jack, 0, + SND_JACK_MECHANICAL | SND_JACK_HEADSET | + wm8994->btn_mask); + goto out; } if (wm8994->mic_detecting) From 7d6898be8db92450ce7a0afcc4238680b9703e2b Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Tue, 28 May 2013 15:06:42 +0530 Subject: [PATCH 142/429] ASoC: wm8994: check for array index returned The array 'drc_cfg' of size 3 may use index value -22 (EINVAL) The array 'retune_mobile_cfg' of size 3 may use index value -22 (EINVAL) Signed-off-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index b38382cc4b59..dfd997aaadfc 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -383,6 +383,8 @@ static int wm8994_get_drc_enum(struct snd_kcontrol *kcontrol, struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); int drc = wm8994_get_drc(kcontrol->id.name); + if (drc < 0) + return drc; ucontrol->value.enumerated.item[0] = wm8994->drc_cfg[drc]; return 0; @@ -488,6 +490,9 @@ static int wm8994_get_retune_mobile_enum(struct snd_kcontrol *kcontrol, struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); int block = wm8994_get_retune_mobile_block(kcontrol->id.name); + if (block < 0) + return block; + ucontrol->value.enumerated.item[0] = wm8994->retune_mobile_cfg[block]; return 0; From 04d245b7899c020559402841d2f70ddd740a7704 Mon Sep 17 00:00:00 2001 From: Nicolas Schichan Date: Thu, 23 May 2013 16:53:02 +0200 Subject: [PATCH 143/429] ASoC: cs42l52: fix default value for MASTERA_VOL. The default register value for MASTERA_VOL is 0x00, the same as MASTERB_VOL. Signed-off-by: Nicolas Schichan Acked-by: Brian Austin Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/cs42l52.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c index 8465c1fa6bf9..030f53c96ec0 100644 --- a/sound/soc/codecs/cs42l52.c +++ b/sound/soc/codecs/cs42l52.c @@ -86,7 +86,7 @@ static const struct reg_default cs42l52_reg_defaults[] = { { CS42L52_BEEP_VOL, 0x00 }, /* r1D Beep Volume off Time */ { CS42L52_BEEP_TONE_CTL, 0x00 }, /* r1E Beep Tone Cfg. */ { CS42L52_TONE_CTL, 0x00 }, /* r1F Tone Ctl */ - { CS42L52_MASTERA_VOL, 0x88 }, /* r20 Master A Volume */ + { CS42L52_MASTERA_VOL, 0x00 }, /* r20 Master A Volume */ { CS42L52_MASTERB_VOL, 0x00 }, /* r21 Master B Volume */ { CS42L52_HPA_VOL, 0x00 }, /* r22 Headphone A Volume */ { CS42L52_HPB_VOL, 0x00 }, /* r23 Headphone B Volume */ From e89b4058096569c999fa599370162022a5a2b3d2 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 21 May 2013 19:41:48 +0200 Subject: [PATCH 144/429] ARM: Kirkwood: TS219: Fix crash by double PCIe instantiation When creating the DT based boards-ts219.c the none DT ts219-setup.c was used as a template. This includes a lateinit() call to initialize the PCIe bus. The code makes use of machine_is_ts219() which is never true on DT, so a FIXME was added and the code left as is. This was unproblematic until b73690c8f8b5d: "ARM: Kirkwood: Support basic hotplug for PCI-E" which changes the way the PCIe bus is initialized. The non-DT ts219-setup.c now crashes during boot. The lateinit() call in the DT boards-ts219.c is being called, machine_is_ts219() is true and so the PCIe is initialized a second time. This patch removes the useless, and now clearly dangerous, code from boards-ts219.c, making ts219-setup.c work again. Signed-off-by: Andrew Lunn Cc: # v3.9.x Signed-off-by: Jason Cooper --- arch/arm/mach-kirkwood/board-ts219.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index acb0187c7ee1..4695d5f35fc9 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -41,13 +41,3 @@ void __init qnap_dt_ts219_init(void) pm_power_off = qnap_tsx1x_power_off; } - -/* FIXME: Will not work with DT. Maybe use MPP40_GPIO? */ -static int __init ts219_pci_init(void) -{ - if (machine_is_ts219()) - kirkwood_pcie_init(KW_PCIE0); - - return 0; -} -subsys_initcall(ts219_pci_init); From b60b61d41220c8d34e2c62a748bc78bc5d40585e Mon Sep 17 00:00:00 2001 From: Nadav Haklai Date: Thu, 23 May 2013 10:54:02 +0200 Subject: [PATCH 145/429] ARM: mvebu: Fix bug in coherency fabric low level init function When adding CPU to the SMP group and enabling the coherency on this CPU we must protect the register access. The previous implementation claims to be atomic but doesn't provide any protection against parallel access to the coherency fabric control and configuration registers. This patch fixes this by using the ldrex and strex mechanism. This method should be used in all accesses to those registers. [gregory.clement@free-electrons.com: fixed the commit's topic] Signed-off-by: Nadav Haklai Signed-off-by: Gregory CLEMENT Signed-off-by: Jason Cooper --- arch/arm/mach-mvebu/coherency_ll.S | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S index 53e8391192cd..5476669ba905 100644 --- a/arch/arm/mach-mvebu/coherency_ll.S +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -32,15 +32,21 @@ ENTRY(ll_set_cpu_coherent) /* Add CPU to SMP group - Atomic */ add r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET - ldr r2, [r3] +1: + ldrex r2, [r3] orr r2, r2, r1 - str r2, [r3] + strex r0, r2, [r3] + cmp r0, #0 + bne 1b /* Enable coherency on CPU - Atomic */ - add r3, r0, #ARMADA_XP_CFB_CFG_REG_OFFSET - ldr r2, [r3] + add r3, r3, #ARMADA_XP_CFB_CFG_REG_OFFSET +1: + ldrex r2, [r3] orr r2, r2, r1 - str r2, [r3] + strex r0, r2, [r3] + cmp r0, #0 + bne 1b dsb From 6721cb60022629ae76365551f05d9658b8d14c55 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Thu, 23 May 2013 14:21:36 -0400 Subject: [PATCH 146/429] ring-buffer: Do not poll non allocated cpu buffers The tracing infrastructure sets up for possible CPUs, but it uses the ring buffer polling, it is possible to call the ring buffer polling code with a CPU that hasn't been allocated. This will cause a kernel oops when it access a ring buffer cpu buffer that is part of the possible cpus but hasn't been allocated yet as the CPU has never been online. Reported-by: Mauro Carvalho Chehab Tested-by: Mauro Carvalho Chehab Signed-off-by: Steven Rostedt --- kernel/trace/ring_buffer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index b59aea2c48c2..e444ff88f0a4 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -620,6 +620,9 @@ int ring_buffer_poll_wait(struct ring_buffer *buffer, int cpu, if (cpu == RING_BUFFER_ALL_CPUS) work = &buffer->irq_work; else { + if (!cpumask_test_cpu(cpu, buffer->cpumask)) + return -EINVAL; + cpu_buffer = buffer->buffers[cpu]; work = &cpu_buffer->irq_work; } From b3657453f16a7b84eab9b93bb9a9a2901ffc70af Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:53 +0200 Subject: [PATCH 147/429] brcmfmac: Turn off ARP offloading when configured for AP. ARP offloading should only be used in STA or P2P client mode. It is currently configured once at init. When being configured for AP ARP offloading should be turned off and when AP mode is left it can be turned back on. Cc: stable@vger.kernel.org Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/dhd_common.c | 18 --------- .../wireless/brcm80211/brcmfmac/fwil_types.h | 6 +++ .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 40 ++++++++++++++++++- 3 files changed, 45 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c index be0787cab24f..9431af2465f3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c @@ -27,7 +27,6 @@ #include "tracepoint.h" #define PKTFILTER_BUF_SIZE 128 -#define BRCMF_ARPOL_MODE 0xb /* agent|snoop|peer_autoreply */ #define BRCMF_DEFAULT_BCN_TIMEOUT 3 #define BRCMF_DEFAULT_SCAN_CHANNEL_TIME 40 #define BRCMF_DEFAULT_SCAN_UNASSOC_TIME 40 @@ -338,23 +337,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp) goto done; } - /* Try to set and enable ARP offload feature, this may fail */ - err = brcmf_fil_iovar_int_set(ifp, "arp_ol", BRCMF_ARPOL_MODE); - if (err) { - brcmf_dbg(TRACE, "failed to set ARP offload mode to 0x%x, err = %d\n", - BRCMF_ARPOL_MODE, err); - err = 0; - } else { - err = brcmf_fil_iovar_int_set(ifp, "arpoe", 1); - if (err) { - brcmf_dbg(TRACE, "failed to enable ARP offload err = %d\n", - err); - err = 0; - } else - brcmf_dbg(TRACE, "successfully enabled ARP offload to 0x%x\n", - BRCMF_ARPOL_MODE); - } - /* Setup packet filter */ brcmf_c_pktfilter_offload_set(ifp, BRCMF_DEFAULT_PACKET_FILTER); brcmf_c_pktfilter_offload_enable(ifp, BRCMF_DEFAULT_PACKET_FILTER, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h index 0f2c83bc95dc..665ef69e974b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h @@ -23,6 +23,12 @@ #define BRCMF_FIL_ACTION_FRAME_SIZE 1800 +/* ARP Offload feature flags for arp_ol iovar */ +#define BRCMF_ARP_OL_AGENT 0x00000001 +#define BRCMF_ARP_OL_SNOOP 0x00000002 +#define BRCMF_ARP_OL_HOST_AUTO_REPLY 0x00000004 +#define BRCMF_ARP_OL_PEER_AUTO_REPLY 0x00000008 + enum brcmf_fil_p2p_if_types { BRCMF_FIL_P2P_IF_CLIENT, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 761f501959a9..94285f634a48 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -459,6 +459,38 @@ send_key_to_dongle(struct net_device *ndev, struct brcmf_wsec_key *key) return err; } +static s32 +brcmf_configure_arp_offload(struct brcmf_if *ifp, bool enable) +{ + s32 err; + u32 mode; + + if (enable) + mode = BRCMF_ARP_OL_AGENT | BRCMF_ARP_OL_PEER_AUTO_REPLY; + else + mode = 0; + + /* Try to set and enable ARP offload feature, this may fail, then it */ + /* is simply not supported and err 0 will be returned */ + err = brcmf_fil_iovar_int_set(ifp, "arp_ol", mode); + if (err) { + brcmf_dbg(TRACE, "failed to set ARP offload mode to 0x%x, err = %d\n", + mode, err); + err = 0; + } else { + err = brcmf_fil_iovar_int_set(ifp, "arpoe", enable); + if (err) { + brcmf_dbg(TRACE, "failed to configure (%d) ARP offload err = %d\n", + enable, err); + err = 0; + } else + brcmf_dbg(TRACE, "successfully configured (%d) ARP offload to 0x%x\n", + enable, mode); + } + + return err; +} + static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy, const char *name, enum nl80211_iftype type, @@ -3683,6 +3715,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, } brcmf_set_mpc(ifp, 0); + brcmf_configure_arp_offload(ifp, false); /* find the RSN_IE */ rsn_ie = brcmf_parse_tlvs((u8 *)settings->beacon.tail, @@ -3789,8 +3822,10 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, set_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); exit: - if (err) + if (err) { brcmf_set_mpc(ifp, 1); + brcmf_configure_arp_offload(ifp, true); + } return err; } @@ -3831,6 +3866,7 @@ static int brcmf_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev) brcmf_err("bss_enable config failed %d\n", err); } brcmf_set_mpc(ifp, 1); + brcmf_configure_arp_offload(ifp, true); set_bit(BRCMF_VIF_STATUS_AP_CREATING, &ifp->vif->sme_state); clear_bit(BRCMF_VIF_STATUS_AP_CREATED, &ifp->vif->sme_state); @@ -5229,6 +5265,8 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) if (err) goto default_conf_out; + brcmf_configure_arp_offload(ifp, true); + cfg->dongle_up = true; default_conf_out: From 15a953d0919e3e7c94691ecabd0d9f74373f19aa Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:54 +0200 Subject: [PATCH 148/429] brcmfmac: Fix p2p setup when connected to ap on 5G. The firmware requires that on p2p setup when net interfaces are created or updated that they start initially with the same channel as the channel in use for the current connection (if any). If none exists take default channel 11. Reviewed-by: Arend Van Spriel Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 28 ++++++++++++++----- 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index e7a1a4770996..17275ceb686c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -47,6 +47,7 @@ #define IS_P2P_SOCIAL_CHANNEL(channel) ((channel == SOCIAL_CHAN_1) || \ (channel == SOCIAL_CHAN_2) || \ (channel == SOCIAL_CHAN_3)) +#define BRCMF_P2P_TEMP_CHAN SOCIAL_CHAN_3 #define SOCIAL_CHAN_CNT 3 #define AF_PEER_SEARCH_CNT 2 @@ -2013,17 +2014,30 @@ static void brcmf_p2p_get_current_chanspec(struct brcmf_p2p_info *p2p, u16 *chanspec) { struct brcmf_if *ifp; - struct brcmf_fil_chan_info_le ci; + u8 mac_addr[ETH_ALEN]; struct brcmu_chan ch; - s32 err; + struct brcmf_bss_info_le *bi; + u8 *buf; ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp; - ch.chnum = 11; - - err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_CHANNEL, &ci, sizeof(ci)); - if (!err) - ch.chnum = le32_to_cpu(ci.hw_channel); + if (brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSSID, mac_addr, + ETH_ALEN) == 0) { + buf = kzalloc(WL_BSS_INFO_MAX, GFP_KERNEL); + if (buf != NULL) { + *(__le32 *)buf = cpu_to_le32(WL_BSS_INFO_MAX); + if (brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_BSS_INFO, + buf, WL_BSS_INFO_MAX) == 0) { + bi = (struct brcmf_bss_info_le *)(buf + 4); + *chanspec = le16_to_cpu(bi->chanspec); + kfree(buf); + return; + } + kfree(buf); + } + } + /* Use default channel for P2P */ + ch.chnum = BRCMF_P2P_TEMP_CHAN; ch.bw = BRCMU_CHAN_BW_20; p2p->cfg->d11inf.encchspec(&ch); *chanspec = ch.chspec; From 24e28beef939df8666a5d2784d6617cd9bb910a0 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 27 May 2013 21:09:55 +0200 Subject: [PATCH 149/429] brcmfmac: add additional parameter to brcmf_free_vif() Pass the struct brcmf_cfg80211_info instance instead of obtaining through vif itself using vif->wdev. This is needed as the netdev associated with this vif is already unregistered. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 25 +++++++++---------- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 17 +++++-------- .../wireless/brcm80211/brcmfmac/wl_cfg80211.h | 3 ++- 3 files changed, 20 insertions(+), 25 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 17275ceb686c..167b7afdf0d8 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -1955,21 +1955,21 @@ s32 brcmf_p2p_attach(struct brcmf_cfg80211_info *cfg) err = brcmf_fil_iovar_int_set(pri_ifp, "p2p_disc", 1); if (err < 0) { brcmf_err("set p2p_disc error\n"); - brcmf_free_vif(p2p_vif); + brcmf_free_vif(cfg, p2p_vif); goto exit; } /* obtain bsscfg index for P2P discovery */ err = brcmf_fil_iovar_int_get(pri_ifp, "p2p_dev", &bssidx); if (err < 0) { brcmf_err("retrieving discover bsscfg index failed\n"); - brcmf_free_vif(p2p_vif); + brcmf_free_vif(cfg, p2p_vif); goto exit; } /* Verify that firmware uses same bssidx as driver !! */ if (p2p_ifp->bssidx != bssidx) { brcmf_err("Incorrect bssidx=%d, compared to p2p_ifp->bssidx=%d\n", bssidx, p2p_ifp->bssidx); - brcmf_free_vif(p2p_vif); + brcmf_free_vif(cfg, p2p_vif); goto exit; } @@ -1997,7 +1997,7 @@ void brcmf_p2p_detach(struct brcmf_p2p_info *p2p) brcmf_p2p_cancel_remain_on_channel(vif->ifp); brcmf_p2p_deinit_discovery(p2p); /* remove discovery interface */ - brcmf_free_vif(vif); + brcmf_free_vif(p2p->cfg, vif); p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; } /* just set it all to zero */ @@ -2222,7 +2222,7 @@ static struct wireless_dev *brcmf_p2p_create_p2pdev(struct brcmf_p2p_info *p2p, return &p2p_vif->wdev; fail: - brcmf_free_vif(p2p_vif); + brcmf_free_vif(p2p->cfg, p2p_vif); return ERR_PTR(err); } @@ -2231,13 +2231,12 @@ fail: * * @vif: virtual interface object to delete. */ -static void brcmf_p2p_delete_p2pdev(struct brcmf_cfg80211_vif *vif) +static void brcmf_p2p_delete_p2pdev(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif) { - struct brcmf_p2p_info *p2p = &vif->ifp->drvr->config->p2p; - cfg80211_unregister_wdev(&vif->wdev); - p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; - brcmf_free_vif(vif); + cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif = NULL; + brcmf_free_vif(cfg, vif); } /** @@ -2328,7 +2327,7 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, return &ifp->vif->wdev; fail: - brcmf_free_vif(vif); + brcmf_free_vif(cfg, vif); return ERR_PTR(err); } @@ -2364,7 +2363,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) break; case NL80211_IFTYPE_P2P_DEVICE: - brcmf_p2p_delete_p2pdev(vif); + brcmf_p2p_delete_p2pdev(cfg, vif); return 0; default: return -ENOTSUPP; @@ -2392,7 +2391,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) err = 0; } brcmf_cfg80211_arm_vif_event(cfg, NULL); - brcmf_free_vif(vif); + brcmf_free_vif(cfg, vif); p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; return err; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 94285f634a48..f8c86b58a6d1 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4292,20 +4292,16 @@ struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, return vif; } -void brcmf_free_vif(struct brcmf_cfg80211_vif *vif) +void brcmf_free_vif(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif) { - struct brcmf_cfg80211_info *cfg; - struct wiphy *wiphy; - - wiphy = vif->wdev.wiphy; - cfg = wiphy_priv(wiphy); list_del(&vif->list); cfg->vif_cnt--; kfree(vif); if (!cfg->vif_cnt) { - wiphy_unregister(wiphy); - wiphy_free(wiphy); + wiphy_unregister(cfg->wiphy); + wiphy_free(cfg->wiphy); } } @@ -4888,8 +4884,7 @@ cfg80211_p2p_attach_out: wl_deinit_priv(cfg); cfg80211_attach_out: - brcmf_free_vif(vif); - wiphy_free(wiphy); + brcmf_free_vif(cfg, vif); return NULL; } @@ -4901,7 +4896,7 @@ void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg) wl_deinit_priv(cfg); brcmf_btcoex_detach(cfg); list_for_each_entry_safe(vif, tmp, &cfg->vif_list, list) { - brcmf_free_vif(vif); + brcmf_free_vif(cfg, vif); } } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index a71cff84cdcf..d9bdaf9a72d0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -487,7 +487,8 @@ enum nl80211_iftype brcmf_cfg80211_get_iftype(struct brcmf_if *ifp); struct brcmf_cfg80211_vif *brcmf_alloc_vif(struct brcmf_cfg80211_info *cfg, enum nl80211_iftype type, bool pm_block); -void brcmf_free_vif(struct brcmf_cfg80211_vif *vif); +void brcmf_free_vif(struct brcmf_cfg80211_info *cfg, + struct brcmf_cfg80211_vif *vif); s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, const u8 *vndr_ie_buf, u32 vndr_ie_len); From 9390ace916b2fd866c1762b1cd16c276d8c8c890 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 27 May 2013 21:09:56 +0200 Subject: [PATCH 150/429] brcmfmac: free net device when registration fails When registration fails the net device is no longer needed. Free the net device and remove reference to private data from the driver. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 10 +++++++--- drivers/net/wireless/brcm80211/brcmfmac/fweh.c | 3 ++- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 59c25463e428..f04e3555dca3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -656,7 +656,9 @@ int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked) return 0; fail: + drvr->iflist[ifp->bssidx] = NULL; ndev->netdev_ops = NULL; + free_netdev(ndev); return -EBADE; } @@ -720,6 +722,9 @@ static int brcmf_net_p2p_attach(struct brcmf_if *ifp) return 0; fail: + ifp->drvr->iflist[ifp->bssidx] = NULL; + ndev->netdev_ops = NULL; + free_netdev(ndev); return -EBADE; } @@ -925,8 +930,6 @@ fail: brcmf_fws_del_interface(ifp); brcmf_fws_deinit(drvr); } - free_netdev(ifp->ndev); - drvr->iflist[0] = NULL; if (p2p_ifp) { free_netdev(p2p_ifp->ndev); drvr->iflist[1] = NULL; @@ -934,7 +937,8 @@ fail: return ret; } if ((brcmf_p2p_enable) && (p2p_ifp)) - brcmf_net_p2p_attach(p2p_ifp); + if (brcmf_net_p2p_attach(p2p_ifp) < 0) + brcmf_p2p_enable = 0; return 0; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c index 5a64280e6485..83ee53a7c76e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.c @@ -202,7 +202,8 @@ static void brcmf_fweh_handle_if_event(struct brcmf_pub *drvr, return; brcmf_fws_add_interface(ifp); if (!drvr->fweh.evt_handler[BRCMF_E_IF]) - err = brcmf_net_attach(ifp, false); + if (brcmf_net_attach(ifp, false) < 0) + return; } if (ifevent->action == BRCMF_E_IF_CHANGE) From cbb371da233eb2b4c200010a5372579b880b4ae6 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Mon, 27 May 2013 21:09:57 +0200 Subject: [PATCH 151/429] brcmfmac: use struct net_device::destructor to remove interfaces Upon deleting a P2P_CLIENT/GO interface the vif and consequently the wdev is freed before the net_device is actually being unregistered but cfg80211 still needs to access the wdev. Using destructor field to free the net_device and vif. Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/dhd_linux.c | 6 ++--- drivers/net/wireless/brcm80211/brcmfmac/p2p.c | 23 ++++++++++++++++++- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 1 - 3 files changed, 25 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index f04e3555dca3..b98f2235978e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -653,6 +653,7 @@ int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked) brcmf_dbg(INFO, "%s: Broadcom Dongle Host Driver\n", ndev->name); + ndev->destructor = free_netdev; return 0; fail: @@ -793,6 +794,7 @@ void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx) struct brcmf_if *ifp; ifp = drvr->iflist[bssidx]; + drvr->iflist[bssidx] = NULL; if (!ifp) { brcmf_err("Null interface, idx=%d\n", bssidx); return; @@ -813,15 +815,13 @@ void brcmf_del_if(struct brcmf_pub *drvr, s32 bssidx) cancel_work_sync(&ifp->setmacaddr_work); cancel_work_sync(&ifp->multicast_work); } - + /* unregister will take care of freeing it */ unregister_netdev(ifp->ndev); if (bssidx == 0) brcmf_cfg80211_detach(drvr->config); - free_netdev(ifp->ndev); } else { kfree(ifp); } - drvr->iflist[bssidx] = NULL; } int brcmf_attach(uint bus_hdrlen, struct device *dev) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index 167b7afdf0d8..79555f006d53 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -2239,6 +2239,25 @@ static void brcmf_p2p_delete_p2pdev(struct brcmf_cfg80211_info *cfg, brcmf_free_vif(cfg, vif); } +/** + * brcmf_p2p_free_p2p_if() - free up net device related data. + * + * @ndev: net device that needs to be freed. + */ +static void brcmf_p2p_free_p2p_if(struct net_device *ndev) +{ + struct brcmf_cfg80211_info *cfg; + struct brcmf_cfg80211_vif *vif; + struct brcmf_if *ifp; + + ifp = netdev_priv(ndev); + cfg = ifp->drvr->config; + vif = ifp->vif; + + brcmf_free_vif(cfg, vif); + free_netdev(ifp->ndev); +} + /** * brcmf_p2p_add_vif() - create a new P2P virtual interface. * @@ -2316,6 +2335,9 @@ struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name, brcmf_err("Registering netdevice failed\n"); goto fail; } + /* override destructor */ + ifp->ndev->destructor = brcmf_p2p_free_p2p_if; + cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = vif; /* Disable firmware roaming for P2P interface */ brcmf_fil_iovar_int_set(ifp, "roam_off", 1); @@ -2391,7 +2413,6 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) err = 0; } brcmf_cfg80211_arm_vif_event(cfg, NULL); - brcmf_free_vif(cfg, vif); p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL; return err; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index f8c86b58a6d1..656ce8765863 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4678,7 +4678,6 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, return 0; case BRCMF_E_IF_DEL: - ifp->vif = NULL; mutex_unlock(&event->vif_event_lock); /* event may not be upon user request */ if (brcmf_cfg80211_vif_event_armed(cfg)) From 1c9d30cfac9901c4f7447deacdfb6b77eee1a096 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:58 +0200 Subject: [PATCH 152/429] brcmfmac: Add multi channel support for P2P. Multi channel support was disabled. This patch will enable it and configure the P2P GO on the correct frequency when multi channel is used. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/wl_cfg80211.c | 26 ++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 656ce8765863..6a8717820b9f 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -3671,11 +3671,29 @@ brcmf_config_ap_mgmt_ie(struct brcmf_cfg80211_vif *vif, return err; } +static s32 +brcmf_cfg80211_set_channel(struct brcmf_cfg80211_info *cfg, + struct brcmf_if *ifp, + struct ieee80211_channel *channel) +{ + u16 chanspec; + s32 err; + + brcmf_dbg(TRACE, "band=%d, center_freq=%d\n", channel->band, + channel->center_freq); + + chanspec = channel_to_chanspec(&cfg->d11inf, channel); + err = brcmf_fil_iovar_int_set(ifp, "chanspec", chanspec); + + return err; +} + static s32 brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, struct cfg80211_ap_settings *settings) { s32 ie_offset; + struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy); struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_tlv *ssid_ie; struct brcmf_ssid_le ssid_le; @@ -3746,6 +3764,12 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, brcmf_config_ap_mgmt_ie(ifp->vif, &settings->beacon); + err = brcmf_cfg80211_set_channel(cfg, ifp, settings->chandef.chan); + if (err < 0) { + brcmf_err("Set Channel failed, %d\n", err); + goto exit; + } + if (settings->beacon_interval) { err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD, settings->beacon_interval); @@ -4184,7 +4208,7 @@ static const struct ieee80211_iface_limit brcmf_iface_limits[] = { static const struct ieee80211_iface_combination brcmf_iface_combos[] = { { .max_interfaces = BRCMF_IFACE_MAX_CNT, - .num_different_channels = 1, /* no multi-channel for now */ + .num_different_channels = 2, .n_limits = ARRAY_SIZE(brcmf_iface_limits), .limits = brcmf_iface_limits } From 102fd0d69eed4c778555fe957f8660dfee1568ea Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Mon, 27 May 2013 21:09:59 +0200 Subject: [PATCH 153/429] brcmfmac: Disable powersave mode for P2P link. For p2p client mode powersave mode should be kept disabled. It is working but inefficient. In general p2p links do no benefit from this mode, because these links are setup temporarily to transfer data. Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 6a8717820b9f..301e572e8923 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -2248,6 +2248,11 @@ brcmf_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *ndev, } pm = enabled ? PM_FAST : PM_OFF; + /* Do not enable the power save after assoc if it is a p2p interface */ + if (ifp->vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT) { + brcmf_dbg(INFO, "Do not enable power save for P2P clients\n"); + pm = PM_OFF; + } brcmf_dbg(INFO, "power save %s\n", (pm ? "enabled" : "disabled")); err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, pm); From add295a4afbdf5852d004c754c552d692b0fcac8 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Tue, 28 May 2013 14:52:19 +0200 Subject: [PATCH 154/429] ath9k: use correct OTP register offsets for AR9550 Accessing the OTP memory on AR9950 causes a data bus like this: Data bus error, epc == 801f7774, ra == 801f7774 Oops[#1]: CPU: 0 PID: 1 Comm: swapper Not tainted 3.10.0-rc3 #592 task: 87c28000 ti: 87c22000 task.ti: 87c22000 $ 0 : 00000000 00000061 deadc0de 00000000 $ 4 : b8115f18 00015f18 00000007 00000004 $ 8 : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c $12 : 7c7c3c7c 80320a68 00000000 7c7c7c3c $16 : 87cd8010 00015f18 00000007 00000000 $20 : 00000064 00000004 87c23c7c 8035210c $24 : 00000000 801f3674 $28 : 87c22000 87c23b48 00000001 801f7774 Hi : 00000000 Lo : 00000064 epc : 801f7774 ath9k_hw_wait+0x58/0xb0 Not tainted ra : 801f7774 ath9k_hw_wait+0x58/0xb0 Status: 1000cc03 KERNEL EXL IE Cause : 4080801c PrId : 00019750 (MIPS 74Kc) Modules linked in: Process swapper (pid: 1, threadinfo=87c22000, task=87c28000, ts=00000000) Stack : 0000000f 00000061 00002710 8006240c 00000001 87cd8010 87c23bb0 87cd8010 00000000 00000004 00000003 80210c7c 000000b3 67fa8000 0000032a 000006fe 000003e8 00000002 00000028 87c23bf0 000003ff 80210d24 803e5630 80210e28 00000000 00000007 87cd8010 00007044 00000004 00000061 000003ff 000001ff 87c26000 87cd8010 00000220 87cd8bb8 80210000 8020fcf4 87c22000 87c23c08 ... Call Trace: [<801f7774>] ath9k_hw_wait+0x58/0xb0 [<80210c7c>] ar9300_otp_read_word+0x80/0xd4 [<80210d24>] ar9300_read_otp+0x54/0xb0 [<8020fcf4>] ar9300_check_eeprom_header+0x1c/0x40 [<80210fe4>] ath9k_hw_ar9300_fill_eeprom+0x118/0x39c [<80206650>] ath9k_hw_eeprom_init+0x74/0xb4 [<801f96d0>] ath9k_hw_init+0x7ec/0x96c [<801e65ec>] ath9k_init_device+0x340/0x758 [<801f35d0>] ath_ahb_probe+0x21c/0x2c0 [<801c041c>] driver_probe_device+0xc0/0x1e4 [<801c05ac>] __driver_attach+0x6c/0xa4 [<801bea08>] bus_for_each_dev+0x64/0xa8 [<801bfa40>] bus_add_driver+0xcc/0x24c [<801c0954>] driver_register+0xbc/0x17c [<803f8fc0>] ath9k_init+0x5c/0x88 [<800608fc>] do_one_initcall+0xec/0x1a0 [<803e6a68>] kernel_init_freeable+0x13c/0x200 [<80309cdc>] kernel_init+0x1c/0xe4 [<80062450>] ret_from_kernel_thread+0x10/0x18 On the AR9550, the OTP registers are located at the same address as on the AR9340. Use the correct values to avoid the error. Cc: stable@vger.kernel.org # 3.6+ Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h index 54ba42f4108a..874f6570bd1c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h @@ -68,13 +68,16 @@ #define AR9300_BASE_ADDR 0x3ff #define AR9300_BASE_ADDR_512 0x1ff -#define AR9300_OTP_BASE (AR_SREV_9340(ah) ? 0x30000 : 0x14000) -#define AR9300_OTP_STATUS (AR_SREV_9340(ah) ? 0x30018 : 0x15f18) +#define AR9300_OTP_BASE \ + ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30000 : 0x14000) +#define AR9300_OTP_STATUS \ + ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30018 : 0x15f18) #define AR9300_OTP_STATUS_TYPE 0x7 #define AR9300_OTP_STATUS_VALID 0x4 #define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 #define AR9300_OTP_STATUS_SM_BUSY 0x1 -#define AR9300_OTP_READ_DATA (AR_SREV_9340(ah) ? 0x3001c : 0x15f1c) +#define AR9300_OTP_READ_DATA \ + ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x3001c : 0x15f1c) enum targetPowerHTRates { HT_TARGET_RATE_0_8_16, From f28c42c576b293b3a1daaed8ca2775ebc2fe5398 Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 24 May 2013 14:29:20 +0800 Subject: [PATCH 155/429] usb: dwc3: pci: PHY should be deleted later than dwc3 core If the glue layer is removed first (core layer later), it deletes the phy device first, then the core device. But at core's removal, it still uses PHY's resources, it may cause kernel's oops. It is much like the problem Paul Zimmerman reported at: http://marc.info/?l=linux-usb&m=136547502011472&w=2. Besides, it is reasonable the PHY is deleted at last as the controller is the PHY's user. Signed-off-by: Peter Chen Cc: Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 227d4a7acad7..eba9e2baf32b 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -196,9 +196,9 @@ static void dwc3_pci_remove(struct pci_dev *pci) { struct dwc3_pci *glue = pci_get_drvdata(pci); + platform_device_unregister(glue->dwc3); platform_device_unregister(glue->usb2_phy); platform_device_unregister(glue->usb3_phy); - platform_device_unregister(glue->dwc3); pci_set_drvdata(pci, NULL); pci_disable_device(pci); } From 022d0547aa8b00ff5035ba6207ebc2c08ea0a51f Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Fri, 24 May 2013 14:30:16 +0800 Subject: [PATCH 156/429] usb: dwc3: exynos: PHY should be deleted later than dwc3 core If the glue layer is removed first (core layer later), it deletes the phy device first, then the core device. But at core's removal, it still uses PHY's resources, it may cause kernel's oops. It is much like the problem Paul Zimmerman reported at: http://marc.info/?l=linux-usb&m=136547502011472&w=2. Besides, it is reasonable the PHY is deleted at last as the controller is the PHY's user. Signed-off-by: Peter Chen Cc: Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-exynos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 929e7dd6e58b..8ce9d7fd6cfc 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -164,9 +164,9 @@ static int dwc3_exynos_remove(struct platform_device *pdev) { struct dwc3_exynos *exynos = platform_get_drvdata(pdev); + device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child); platform_device_unregister(exynos->usb2_phy); platform_device_unregister(exynos->usb3_phy); - device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child); clk_disable_unprepare(exynos->clk); From 5bf8fae33d14cc5c3c53a926f9079f92c8b082b0 Mon Sep 17 00:00:00 2001 From: George Cherian Date: Mon, 27 May 2013 14:35:49 +0530 Subject: [PATCH 157/429] usb: dwc3: gadget: free trb pool only from epnum 2 we never allocate a TRB pool for physical endpoints 0 and 1 so trying to free it (a invalid TRB pool pointer) will lead us in a warning while removing dwc3.ko module. In order to fix the situation, all we have to do is skip dwc3_free_trb_pool() for physical endpoints 0 and 1 just as we while deleting endpoints from the endpoints list. Cc: stable@vger.kernel.org Signed-off-by: George Cherian Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 2b6e7e001207..b5e5b35df49c 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1706,11 +1706,19 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) dep = dwc->eps[epnum]; if (!dep) continue; - - dwc3_free_trb_pool(dep); - - if (epnum != 0 && epnum != 1) + /* + * Physical endpoints 0 and 1 are special; they form the + * bi-directional USB endpoint 0. + * + * For those two physical endpoints, we don't allocate a TRB + * pool nor do we add them the endpoints list. Due to that, we + * shouldn't do these two operations otherwise we would end up + * with all sorts of bugs when removing dwc3.ko. + */ + if (epnum != 0 && epnum != 1) { + dwc3_free_trb_pool(dep); list_del(&dep->endpoint.ep_list); + } kfree(dep); } From ed74df12dc3e07a37d99aab60211496e871488a0 Mon Sep 17 00:00:00 2001 From: Virupax Sadashivpetimath Date: Wed, 24 Apr 2013 08:38:48 +0200 Subject: [PATCH 158/429] usb: musb: make use_sg flag URB specific Since highmem PIO URB handling was introduced in: 8e8a551 usb: musb: host: Handle highmem in PIO mode when a URB is being handled it may happen that the static use_sg flag was set by a previous URB with buffer in highmem. This leads to error in handling the present URB. Fix this by making the use_sg flag URB specific. Cc: stable # 3.7+ Acked-by: Linus Walleij Signed-off-by: Virupax Sadashivpetimath Signed-off-by: Fabio Baltieri Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_host.c | 18 ++++++++---------- drivers/usb/musb/musb_host.h | 1 + 2 files changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 8914dec49f01..9d3044bdebe5 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1232,7 +1232,6 @@ void musb_host_tx(struct musb *musb, u8 epnum) void __iomem *mbase = musb->mregs; struct dma_channel *dma; bool transfer_pending = false; - static bool use_sg; musb_ep_select(mbase, epnum); tx_csr = musb_readw(epio, MUSB_TXCSR); @@ -1463,9 +1462,9 @@ done: * NULL. */ if (!urb->transfer_buffer) - use_sg = true; + qh->use_sg = true; - if (use_sg) { + if (qh->use_sg) { /* sg_miter_start is already done in musb_ep_program */ if (!sg_miter_next(&qh->sg_miter)) { dev_err(musb->controller, "error: sg list empty\n"); @@ -1484,9 +1483,9 @@ done: qh->segsize = length; - if (use_sg) { + if (qh->use_sg) { if (offset + length >= urb->transfer_buffer_length) - use_sg = false; + qh->use_sg = false; } musb_ep_select(mbase, epnum); @@ -1552,7 +1551,6 @@ void musb_host_rx(struct musb *musb, u8 epnum) bool done = false; u32 status; struct dma_channel *dma; - static bool use_sg; unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG; musb_ep_select(mbase, epnum); @@ -1878,12 +1876,12 @@ void musb_host_rx(struct musb *musb, u8 epnum) * NULL. */ if (!urb->transfer_buffer) { - use_sg = true; + qh->use_sg = true; sg_miter_start(&qh->sg_miter, urb->sg, 1, sg_flags); } - if (use_sg) { + if (qh->use_sg) { if (!sg_miter_next(&qh->sg_miter)) { dev_err(musb->controller, "error: sg list empty\n"); sg_miter_stop(&qh->sg_miter); @@ -1913,8 +1911,8 @@ finish: urb->actual_length += xfer_len; qh->offset += xfer_len; if (done) { - if (use_sg) - use_sg = false; + if (qh->use_sg) + qh->use_sg = false; if (urb->status == -EINPROGRESS) urb->status = status; diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h index 5a9c8feec10c..738f7eb60df9 100644 --- a/drivers/usb/musb/musb_host.h +++ b/drivers/usb/musb/musb_host.h @@ -74,6 +74,7 @@ struct musb_qh { u16 frame; /* for periodic schedule */ unsigned iso_idx; /* in urb->iso_frame_desc[] */ struct sg_mapping_iter sg_miter; /* for highmem in PIO mode */ + bool use_sg; /* to track urb using sglist */ }; /* map from control or bulk queue head to the first qh on that ring */ From aa848233f740abbabfa7669daca0ab94aaa37bcd Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 May 2013 23:27:07 +0200 Subject: [PATCH 159/429] ntp: Remove unused variable flags in __hardpps MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit kernel/time/ntp.c: In function ‘__hardpps’: kernel/time/ntp.c:877: warning: unused variable ‘flags’ commit a076b2146fabb0894cae5e0189a8ba3f1502d737 ("ntp: Remove ntp_lock, using the timekeeping locks to protect ntp state") removed its users, but not the actual variable. Signed-off-by: Geert Uytterhoeven Signed-off-by: John Stultz --- kernel/time/ntp.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index 12ff13a838c6..8f5b3b98577b 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -874,7 +874,6 @@ static void hardpps_update_phase(long error) void __hardpps(const struct timespec *phase_ts, const struct timespec *raw_ts) { struct pps_normtime pts_norm, freq_norm; - unsigned long flags; pts_norm = pps_normalize_ts(*phase_ts); From 0d6bd9953f739dad96d9a0de65383e479ab4e10d Mon Sep 17 00:00:00 2001 From: Zoran Markovic Date: Fri, 17 May 2013 11:24:05 -0700 Subject: [PATCH 160/429] timekeeping: Correct run-time detection of persistent_clock. Since commit 31ade30692dc9680bfc95700d794818fa3f754ac, timekeeping_init() checks for presence of persistent clock by attempting to read a non-zero time value. This is an issue on platforms where persistent_clock (instead is implemented as a free-running counter (instead of an RTC) starting from zero on each boot and running during suspend. Examples are some ARM platforms (e.g. PandaBoard). An attempt to read such a clock during timekeeping_init() may return zero value and falsely declare persistent clock as missing. Additionally, in the above case suspend times may be accounted twice (once from timekeeping_resume() and once from rtc_resume()), resulting in a gradual drift of system time. This patch does a run-time correction of the issue by doing the same check during timekeeping_suspend(). A better long-term solution would have to return error when trying to read non-existing clock and zero when trying to read an uninitialized clock, but that would require changing all persistent_clock implementations. This patch addresses the immediate breakage, for now. Cc: John Stultz Cc: Thomas Gleixner Cc: Feng Tang Cc: stable@vger.kernel.org Signed-off-by: Zoran Markovic [jstultz: Tweaked commit message and subject] Signed-off-by: John Stultz --- kernel/time/timekeeping.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 98cd470bbe49..baeeb5c87cf1 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -975,6 +975,14 @@ static int timekeeping_suspend(void) read_persistent_clock(&timekeeping_suspend_time); + /* + * On some systems the persistent_clock can not be detected at + * timekeeping_init by its return value, so if we see a valid + * value returned, update the persistent_clock_exists flag. + */ + if (timekeeping_suspend_time.tv_sec || timekeeping_suspend_time.tv_nsec) + persistent_clock_exist = true; + raw_spin_lock_irqsave(&timekeeper_lock, flags); write_seqcount_begin(&timekeeper_seq); timekeeping_forward_now(tk); From b161c144404c18f6a9e20e46b63828ae3c2eb093 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 24 May 2013 09:47:49 -0400 Subject: [PATCH 161/429] svcrpc: implement O_NONBLOCK behavior for use-gss-proxy Somebody noticed LTP was complaining about O_NONBLOCK opens of /proc/net/rpc/use-gss-proxy succeeding and then a following read hanging. I'm not convinced LTP really has any business opening random proc files and expecting them to behave a certain way. Maybe this isn't really a bug. But in any case the O_NONBLOCK behavior could be useful for someone that wants to test whether gss-proxy is up without waiting. Reported-by: Jan Stancek Signed-off-by: J. Bruce Fields --- net/sunrpc/auth_gss/svcauth_gss.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index 2c6a1ece54bf..29b4ba93ab3c 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -1317,10 +1317,12 @@ static inline bool gssp_ready(struct sunrpc_net *sn) return false; } -static int wait_for_gss_proxy(struct net *net) +static int wait_for_gss_proxy(struct net *net, struct file *file) { struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); + if (file->f_flags & O_NONBLOCK && !gssp_ready(sn)) + return -EAGAIN; return wait_event_interruptible(sn->gssp_wq, gssp_ready(sn)); } @@ -1362,7 +1364,7 @@ static ssize_t read_gssp(struct file *file, char __user *buf, size_t len; int ret; - ret = wait_for_gss_proxy(net); + ret = wait_for_gss_proxy(net, file); if (ret) return ret; From e9d0626ed43a41a3fc526d1df06122b0d4eac174 Mon Sep 17 00:00:00 2001 From: Zhang Yanfei Date: Tue, 14 May 2013 14:48:58 +0800 Subject: [PATCH 162/429] x86-64, init: Fix a possible wraparound bug in switchover in head_64.S In head_64.S, a switchover has been used to handle kernel crossing 1G, 512G boundaries. And commit 8170e6bed465b4b0c7687f93e9948aca4358a33b x86, 64bit: Use a #PF handler to materialize early mappings on demand said: During the switchover in head_64.S, before #PF handler is available, we use three pages to handle kernel crossing 1G, 512G boundaries with sharing page by playing games with page aliasing: the same page is mapped twice in the higher-level tables with appropriate wraparound. But from the switchover code, when we set up the PUD table: 114 addq $4096, %rdx 115 movq %rdi, %rax 116 shrq $PUD_SHIFT, %rax 117 andl $(PTRS_PER_PUD-1), %eax 118 movq %rdx, (4096+0)(%rbx,%rax,8) 119 movq %rdx, (4096+8)(%rbx,%rax,8) It seems line 119 has a potential bug there. For example, if the kernel is loaded at physical address 511G+1008M, that is 000000000 111111111 111111000 000000000000000000000 and the kernel _end is 512G+2M, that is 000000001 000000000 000000001 000000000000000000000 So in this example, when using the 2nd page to setup PUD (line 114~119), rax is 511. In line 118, we put rdx which is the address of the PMD page (the 3rd page) into entry 511 of the PUD table. But in line 119, the entry we calculate from (4096+8)(%rbx,%rax,8) has exceeded the PUD page. IMO, the entry in line 119 should be wraparound into entry 0 of the PUD table. The patch fixes the bug. Signed-off-by: Zhang Yanfei Link: http://lkml.kernel.org/r/5191DE5A.3020302@cn.fujitsu.com Signed-off-by: Yinghai Lu Cc: v3.9 Signed-off-by: H. Peter Anvin --- arch/x86/kernel/head_64.S | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 08f7e8039099..321d65ebaffe 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -115,8 +115,10 @@ startup_64: movq %rdi, %rax shrq $PUD_SHIFT, %rax andl $(PTRS_PER_PUD-1), %eax - movq %rdx, (4096+0)(%rbx,%rax,8) - movq %rdx, (4096+8)(%rbx,%rax,8) + movq %rdx, 4096(%rbx,%rax,8) + incl %eax + andl $(PTRS_PER_PUD-1), %eax + movq %rdx, 4096(%rbx,%rax,8) addq $8192, %rbx movq %rdi, %rax From 2a0ff3fbe39bc93f719ff857e5a359d9780579ff Mon Sep 17 00:00:00 2001 From: Jeff Liu Date: Sun, 26 May 2013 21:33:09 +0800 Subject: [PATCH 163/429] cgroup: warn about mismatching options of a new mount of an existing hierarchy With the new __DEVEL__sane_behavior mount option was introduced, if the root cgroup is alive with no xattr function, to mount a new cgroup with xattr will be rejected in terms of design which just fine. However, if the root cgroup does not mounted with __DEVEL__sane_hehavior, to create a new cgroup with xattr option will succeed although after that the EA function does not works as expected but will get ENOTSUPP for setting up attributes under either cgroup. e.g. setfattr: /cgroup2/test: Operation not supported Instead of keeping silence in this case, it's better to drop a log entry in warning level. That would be helpful to understand the reason behind the scene from the user's perspective, and this is essentially an improvement does not break the backward compatibilities. With this fix, above mount attemption will keep up works as usual but the following line cound be found at the system log: [ ...] cgroup: new mount options do not match the existing superblock tj: minor formatting / message updates. Signed-off-by: Jie Liu Reported-by: Alexey Kodanev Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- kernel/cgroup.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 31e9ef319070..a7c9e6ddb979 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1686,11 +1686,14 @@ static struct dentry *cgroup_mount(struct file_system_type *fs_type, */ cgroup_drop_root(opts.new_root); - if (((root->flags | opts.flags) & CGRP_ROOT_SANE_BEHAVIOR) && - root->flags != opts.flags) { - pr_err("cgroup: sane_behavior: new mount options should match the existing superblock\n"); - ret = -EINVAL; - goto drop_new_super; + if (root->flags != opts.flags) { + if ((root->flags | opts.flags) & CGRP_ROOT_SANE_BEHAVIOR) { + pr_err("cgroup: sane_behavior: new mount options should match the existing superblock\n"); + ret = -EINVAL; + goto drop_new_super; + } else { + pr_warning("cgroup: new mount options do not match the existing superblock, will be ignored\n"); + } } /* no subsys rebinding, so refcounts don't change */ From da9d0fbf5e9aa47492a19588bd0efd18d6d172e0 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 9 May 2013 13:58:19 -0700 Subject: [PATCH 164/429] ARM: exynos: defconfig update This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by: Olof Johansson Reviewed-by: Doug Anderson Tested-by: Tushar Behera Acked-by: Kukjin Kim --- arch/arm/configs/exynos_defconfig | 54 ++++++++++++++++++++++++++----- 1 file changed, 46 insertions(+), 8 deletions(-) diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index e40b435d204e..227abf9cc601 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -1,4 +1,4 @@ -CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y @@ -7,17 +7,18 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y CONFIG_ARCH_EXYNOS=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_S3C_LOWLEVEL_UART_PORT=3 CONFIG_S3C24XX_PWM=y CONFIG_ARCH_EXYNOS5=y CONFIG_MACH_EXYNOS4_DT=y -CONFIG_MACH_EXYNOS5_DT=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" @@ -30,35 +31,58 @@ CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_RFKILL_REGULATOR=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m CONFIG_NETDEVICES=y CONFIG_SMSC911X=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set +CONFIG_KEYBOARD_CROS_EC=y +# CONFIG_MOUSE_PS2 is not set +CONFIG_MOUSE_CYAPA=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_HW_RANDOM=y +CONFIG_TCG_TPM=y +CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C=y +CONFIG_I2C_MUX=y +CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_I2C_S3C2410=y +CONFIG_DEBUG_GPIO=y # CONFIG_HWMON is not set +CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_I2C=y +CONFIG_MFD_MAX77686=y +CONFIG_MFD_MAX8997=y +CONFIG_MFD_SEC_CORE=y CONFIG_MFD_TPS65090=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MAX8997=y +CONFIG_REGULATOR_MAX77686=y +CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_SIMPLE=y CONFIG_EXYNOS_VIDEO=y CONFIG_EXYNOS_MIPI_DSI=y CONFIG_EXYNOS_DP=y @@ -67,6 +91,20 @@ CONFIG_FONTS=y CONFIG_FONT_7x14=y CONFIG_LOGO=y CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_S5P=y +CONFIG_USB_STORAGE=y +CONFIG_USB_DWC3=y +CONFIG_USB_PHY=y +CONFIG_SAMSUNG_USB2PHY=y +CONFIG_SAMSUNG_USB3PHY=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_S3C=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_IDMAC=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_COMMON_CLK_MAX77686=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y @@ -79,6 +117,7 @@ CONFIG_ROMFS_FS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y @@ -87,6 +126,5 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_EARLY_PRINTK=y +CONFIG_CRYPTO_SHA256=y CONFIG_CRC_CCITT=y From fcce9a35f8faaa1f52236c554ef1b15d99a7537e Mon Sep 17 00:00:00 2001 From: George Spelvin Date: Wed, 29 May 2013 10:20:35 +0900 Subject: [PATCH 165/429] ahci: add an observed PCI ID for Marvell 88se9172 SATA controller A third possible PCI ID, as personally observed, and found in the pci.ids list. Signed-off-by: George Spelvin Signed-off-by: Tejun Heo --- drivers/ata/ahci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 21808766140a..2b50dfdf1cfc 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -423,6 +423,8 @@ static const struct pci_device_id ahci_pci_tbl[] = { .driver_data = board_ahci_yes_fbs }, /* 88se9125 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x917a), .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9172), + .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9192), .driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3), From fdc03438f53a00294ed9939eb3a1f6db6f3d8963 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 28 May 2013 14:03:10 -0400 Subject: [PATCH 166/429] USB: revert periodic scheduling bugfix This patch reverts commit 3e619d04159be54b3daa0b7036b0ce9e067f4b5d (USB: EHCI: fix bug in scheduling periodic split transfers). The commit was valid -- it fixed a real bug -- but the periodic scheduler in ehci-hcd is in such bad shape (especially the part that handles split transactions) that fixing one bug is very likely to cause another to surface. That's what happened in this case; the result was choppy and noisy playback on certain 24-bit audio devices. The only real fix will be to rewrite this entire section of code. My next project... This fixes https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1136110. Thanks to Tim Richardson for extra testing and feedback, and to Joseph Salisbury and Tyson Tan for tracking down the original source of the problem. Signed-off-by: Alan Stern CC: Joseph Salisbury CC: Tim Richardson Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index acff5b8f6e89..f3c1028a54fc 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -213,7 +213,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask) } static const unsigned char -max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 }; +max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 }; /* carryover low/fullspeed bandwidth that crosses uframe boundries */ static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8]) From 5f8e2c07d75967ee49a5da1d21ddf5f50d48cda0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:37 +0200 Subject: [PATCH 167/429] USB: serial: fix Treo/Kyocera interrrupt-in urb context The first and second interrupt-in urbs are swapped for some Treo/Kyocera devices, but the urb context was never updated with the new port. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/visor.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 7573ec8a084f..8d1a3e63b0ad 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -564,6 +564,7 @@ static int treo_attach(struct usb_serial *serial) dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\ dest->bulk_in_buffer = src->bulk_in_buffer; \ dest->interrupt_in_urb = src->interrupt_in_urb; \ + dest->interrupt_in_urb->context = dest; \ dest->interrupt_in_endpointAddress = \ src->interrupt_in_endpointAddress;\ dest->interrupt_in_buffer = src->interrupt_in_buffer; \ From 420021a395ce38b7ab2cceb52dee4038be7d8fa3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:38 +0200 Subject: [PATCH 168/429] USB: visor: fix initialisation of Treo/Kyocera devices Fix regression introduced by commit 214916f2e ("USB: visor: reimplement using generic framework") which broke initialisation of Treo/Kyocera devices that re-mapped bulk-in endpoints. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/visor.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 8d1a3e63b0ad..9910aa2edf4b 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -560,9 +560,17 @@ static int treo_attach(struct usb_serial *serial) */ #define COPY_PORT(dest, src) \ do { \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) { \ + dest->read_urbs[i] = src->read_urbs[i]; \ + dest->read_urbs[i]->context = dest; \ + dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \ + } \ dest->read_urb = src->read_urb; \ dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\ dest->bulk_in_buffer = src->bulk_in_buffer; \ + dest->bulk_in_size = src->bulk_in_size; \ dest->interrupt_in_urb = src->interrupt_in_urb; \ dest->interrupt_in_urb->context = dest; \ dest->interrupt_in_endpointAddress = \ From 72ea18a558ed7a63a50bb121ba60d73b5b38ae30 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:39 +0200 Subject: [PATCH 169/429] USB: mos7720: fix DMA to stack The read_mos_reg function is called with stack-allocated buffers, which must not be used for control messages. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7720.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index cc0e54345df9..7752cffbf2bc 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -227,11 +227,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum, __u8 requesttype = (__u8)0xc0; __u16 index = get_reg_index(reg); __u16 value = get_reg_value(reg, serial_portnum); - int status = usb_control_msg(usbdev, pipe, request, requesttype, value, - index, data, 1, MOS_WDR_TIMEOUT); - if (status < 0) + u8 *buf; + int status; + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + status = usb_control_msg(usbdev, pipe, request, requesttype, value, + index, buf, 1, MOS_WDR_TIMEOUT); + if (status == 1) + *data = *buf; + else if (status < 0) dev_err(&usbdev->dev, "mos7720: usb_control_msg() failed: %d", status); + kfree(buf); + return status; } From 15ee89c3347fbf58a4361011eda5ac2731e45126 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:40 +0200 Subject: [PATCH 170/429] USB: mos7840: fix DMA to stack Fix regression introduced by commit 0eafe4de1a ("USB: serial: mos7840: add support for MCS7810 devices") which used stack-allocated buffers for control messages. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7840.c | 35 +++++++++++++++++++++++++++-------- 1 file changed, 27 insertions(+), 8 deletions(-) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index a0d5ea545982..7e998081e1cd 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2142,13 +2142,21 @@ static int mos7840_ioctl(struct tty_struct *tty, static int mos7810_check(struct usb_serial *serial) { int i, pass_count = 0; + u8 *buf; __u16 data = 0, mcr_data = 0; __u16 test_pattern = 0x55AA; + int res; + + buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (!buf) + return 0; /* failed to identify 7810 */ /* Store MCR setting */ - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER, - &mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (res == VENDOR_READ_LENGTH) + mcr_data = *buf; for (i = 0; i < 16; i++) { /* Send the 1-bit test pattern out to MCS7810 test pin */ @@ -2158,9 +2166,12 @@ static int mos7810_check(struct usb_serial *serial) MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT); /* Read the test pattern back */ - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, - VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + res = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ, + MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, + VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (res == VENDOR_READ_LENGTH) + data = *buf; /* If this is a MCS7810 device, both test patterns must match */ if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001) @@ -2174,6 +2185,8 @@ static int mos7810_check(struct usb_serial *serial) MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT); + kfree(buf); + if (pass_count == 16) return 1; @@ -2183,11 +2196,17 @@ static int mos7810_check(struct usb_serial *serial) static int mos7840_calc_num_ports(struct usb_serial *serial) { __u16 data = 0x00; + u8 *buf; int mos7840_num_ports; - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, - VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (buf) { + usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, + VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + data = *buf; + kfree(buf); + } if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 || serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) { From 634371911730a462626071065b64cd6e1fe213e0 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:41 +0200 Subject: [PATCH 171/429] USB: ark3116: fix control-message timeout The control-message timeout is specified in milliseconds and should not depend on HZ. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ark3116.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 3b16118cbf62..40e7fd94646f 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -43,7 +43,7 @@ #define DRIVER_NAME "ark3116" /* usb timeout of 1 second */ -#define ARK_TIMEOUT (1*HZ) +#define ARK_TIMEOUT 1000 static const struct usb_device_id id_table[] = { { USB_DEVICE(0x6547, 0x0232) }, From 6c13ff68a7ce01da7a51b44241a7aad8eaaedde7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:42 +0200 Subject: [PATCH 172/429] USB: iuu_phoenix: fix bulk-message timeout The bulk-message timeout is specified in milliseconds and should not depend on HZ. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/iuu_phoenix.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 9d74c278b7b5..790673e5faa7 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -287,7 +287,7 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count) usb_bulk_msg(serial->dev, usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress), buf, - count, &actual, HZ * 1); + count, &actual, 1000); if (status != IUU_OPERATION_OK) dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); @@ -307,7 +307,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count) usb_bulk_msg(serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), buf, - count, &actual, HZ * 1); + count, &actual, 1000); if (status != IUU_OPERATION_OK) dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); From 849513a7809175420d353625b6f651d961e99d49 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:43 +0200 Subject: [PATCH 173/429] USB: mos7720: fix message timeouts The control and bulk-message timeouts are specified in milliseconds and should not depend on HZ. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7720.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 7752cffbf2bc..6eac26649009 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -40,7 +40,7 @@ #define DRIVER_DESC "Moschip USB Serial Driver" /* default urb timeout */ -#define MOS_WDR_TIMEOUT (HZ * 5) +#define MOS_WDR_TIMEOUT 5000 #define MOS_MAX_PORT 0x02 #define MOS_WRITE 0x0E @@ -1938,7 +1938,7 @@ static int mos7720_startup(struct usb_serial *serial) /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ); + (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); /* start the interrupt urb */ ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); @@ -1981,7 +1981,7 @@ static void mos7720_release(struct usb_serial *serial) /* wait for synchronous usb calls to return */ if (mos_parport->msg_pending) wait_for_completion_timeout(&mos_parport->syncmsg_compl, - MOS_WDR_TIMEOUT); + msecs_to_jiffies(MOS_WDR_TIMEOUT)); parport_remove_port(mos_parport->pp); usb_set_serial_data(serial, NULL); From 5cbfa3acdcbf19e1d29cf3479ad8200d2e644e44 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 27 May 2013 14:44:44 +0200 Subject: [PATCH 174/429] USB: zte_ev: fix control-message timeouts The control-message timeout is specified in milliseconds and should not depend on HZ. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/zte_ev.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c index 39ee7373b4ee..b9a88f253636 100644 --- a/drivers/usb/serial/zte_ev.c +++ b/drivers/usb/serial/zte_ev.c @@ -53,7 +53,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0001, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 2st cmd and recieve data */ @@ -65,7 +65,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 3 cmd */ @@ -84,7 +84,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 4 cmd */ @@ -95,7 +95,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 5 cmd */ @@ -107,7 +107,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 6 cmd */ @@ -126,7 +126,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); kfree(buf); @@ -178,7 +178,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0002, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */ @@ -186,7 +186,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 3st cmd and recieve data */ @@ -198,7 +198,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 4 cmd */ @@ -217,7 +217,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 5 cmd */ @@ -228,7 +228,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 6 cmd */ @@ -240,7 +240,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 7 cmd */ @@ -259,7 +259,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 8 cmd */ @@ -270,7 +270,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); kfree(buf); From 12bcbe66d7b3cc9f9f86cd02f925666eaa3c2107 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 28 May 2013 14:38:42 -0400 Subject: [PATCH 175/429] rcu: Add _notrace variation of rcu_dereference_raw() and hlist_for_each_entry_rcu() As rcu_dereference_raw() under RCU debug config options can add quite a bit of checks, and that tracing uses rcu_dereference_raw(), these checks happen with the function tracer. The function tracer also happens to trace these debug checks too. This added overhead can livelock the system. Add a new interface to RCU for both rcu_dereference_raw_notrace() as well as hlist_for_each_entry_rcu_notrace() as the hlist iterator uses the rcu_dereference_raw() as well, and is used a bit with the function tracer. Link: http://lkml.kernel.org/r/20130528184209.304356745@goodmis.org Acked-by: Paul E. McKenney Signed-off-by: Steven Rostedt --- include/linux/rculist.h | 20 ++++++++++++++++++++ include/linux/rcupdate.h | 9 +++++++++ 2 files changed, 29 insertions(+) diff --git a/include/linux/rculist.h b/include/linux/rculist.h index 8089e35d47ac..f4b1001a4676 100644 --- a/include/linux/rculist.h +++ b/include/linux/rculist.h @@ -460,6 +460,26 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev, pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu(\ &(pos)->member)), typeof(*(pos)), member)) +/** + * hlist_for_each_entry_rcu_notrace - iterate over rcu list of given type (for tracing) + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the hlist_node within the struct. + * + * This list-traversal primitive may safely run concurrently with + * the _rcu list-mutation primitives such as hlist_add_head_rcu() + * as long as the traversal is guarded by rcu_read_lock(). + * + * This is the same as hlist_for_each_entry_rcu() except that it does + * not do any RCU debugging or tracing. + */ +#define hlist_for_each_entry_rcu_notrace(pos, head, member) \ + for (pos = hlist_entry_safe (rcu_dereference_raw_notrace(hlist_first_rcu(head)),\ + typeof(*(pos)), member); \ + pos; \ + pos = hlist_entry_safe(rcu_dereference_raw_notrace(hlist_next_rcu(\ + &(pos)->member)), typeof(*(pos)), member)) + /** * hlist_for_each_entry_rcu_bh - iterate over rcu list of given type * @pos: the type * to use as a loop cursor. diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 4ccd68e49b00..ddcc7826d907 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -640,6 +640,15 @@ static inline void rcu_preempt_sleep_check(void) #define rcu_dereference_raw(p) rcu_dereference_check(p, 1) /*@@@ needed? @@@*/ +/* + * The tracing infrastructure traces RCU (we want that), but unfortunately + * some of the RCU checks causes tracing to lock up the system. + * + * The tracing version of rcu_dereference_raw() must not call + * rcu_read_lock_held(). + */ +#define rcu_dereference_raw_notrace(p) __rcu_dereference_check((p), 1, __rcu) + /** * rcu_access_index() - fetch RCU index with no dereferencing * @p: The index to read From 1bb539ca36e21c2f4fce0865e11df384bc7b7656 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 28 May 2013 14:38:43 -0400 Subject: [PATCH 176/429] ftrace: Use the rcu _notrace variants for rcu_dereference_raw() and friends As rcu_dereference_raw() under RCU debug config options can add quite a bit of checks, and that tracing uses rcu_dereference_raw(), these checks happen with the function tracer. The function tracer also happens to trace these debug checks too. This added overhead can livelock the system. Have the function tracer use the new RCU _notrace equivalents that do not do the debug checks for RCU. Link: http://lkml.kernel.org/r/20130528184209.467603904@goodmis.org Acked-by: Paul E. McKenney Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index b549b0f5b977..6c508ff33c62 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -120,22 +120,22 @@ static void ftrace_ops_no_ops(unsigned long ip, unsigned long parent_ip); /* * Traverse the ftrace_global_list, invoking all entries. The reason that we - * can use rcu_dereference_raw() is that elements removed from this list + * can use rcu_dereference_raw_notrace() is that elements removed from this list * are simply leaked, so there is no need to interact with a grace-period - * mechanism. The rcu_dereference_raw() calls are needed to handle + * mechanism. The rcu_dereference_raw_notrace() calls are needed to handle * concurrent insertions into the ftrace_global_list. * * Silly Alpha and silly pointer-speculation compiler optimizations! */ #define do_for_each_ftrace_op(op, list) \ - op = rcu_dereference_raw(list); \ + op = rcu_dereference_raw_notrace(list); \ do /* * Optimized for just a single item in the list (as that is the normal case). */ #define while_for_each_ftrace_op(op) \ - while (likely(op = rcu_dereference_raw((op)->next)) && \ + while (likely(op = rcu_dereference_raw_notrace((op)->next)) && \ unlikely((op) != &ftrace_list_end)) static inline void ftrace_ops_init(struct ftrace_ops *ops) @@ -779,7 +779,7 @@ ftrace_find_profiled_func(struct ftrace_profile_stat *stat, unsigned long ip) if (hlist_empty(hhd)) return NULL; - hlist_for_each_entry_rcu(rec, hhd, node) { + hlist_for_each_entry_rcu_notrace(rec, hhd, node) { if (rec->ip == ip) return rec; } @@ -1165,7 +1165,7 @@ ftrace_lookup_ip(struct ftrace_hash *hash, unsigned long ip) hhd = &hash->buckets[key]; - hlist_for_each_entry_rcu(entry, hhd, hlist) { + hlist_for_each_entry_rcu_notrace(entry, hhd, hlist) { if (entry->ip == ip) return entry; } @@ -1422,8 +1422,8 @@ ftrace_ops_test(struct ftrace_ops *ops, unsigned long ip) struct ftrace_hash *notrace_hash; int ret; - filter_hash = rcu_dereference_raw(ops->filter_hash); - notrace_hash = rcu_dereference_raw(ops->notrace_hash); + filter_hash = rcu_dereference_raw_notrace(ops->filter_hash); + notrace_hash = rcu_dereference_raw_notrace(ops->notrace_hash); if ((ftrace_hash_empty(filter_hash) || ftrace_lookup_ip(filter_hash, ip)) && @@ -2920,7 +2920,7 @@ static void function_trace_probe_call(unsigned long ip, unsigned long parent_ip, * on the hash. rcu_read_lock is too dangerous here. */ preempt_disable_notrace(); - hlist_for_each_entry_rcu(entry, hhd, node) { + hlist_for_each_entry_rcu_notrace(entry, hhd, node) { if (entry->ip == ip) entry->ops->func(ip, parent_ip, &entry->data); } From 1be374a0518a288147c6a7398792583200a67261 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Wed, 22 May 2013 14:07:44 -0700 Subject: [PATCH 177/429] net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg To: linux-kernel@vger.kernel.org Cc: x86@kernel.org, trinity@vger.kernel.org, Andy Lutomirski , netdev@vger.kernel.org, "David S. Miller" Subject: [PATCH 5/5] net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg MSG_CMSG_COMPAT is (AFAIK) not intended to be part of the API -- it's a hack that steals a bit to indicate to other networking code that a compat entry was used. So don't allow it from a non-compat syscall. This prevents an oops when running this code: int main() { int s; struct sockaddr_in addr; struct msghdr *hdr; char *highpage = mmap((void*)(TASK_SIZE_MAX - 4096), 4096, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0); if (highpage == MAP_FAILED) err(1, "mmap"); s = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP); if (s == -1) err(1, "socket"); addr.sin_family = AF_INET; addr.sin_port = htons(1); addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); if (connect(s, (struct sockaddr*)&addr, sizeof(addr)) != 0) err(1, "connect"); void *evil = highpage + 4096 - COMPAT_MSGHDR_SIZE; printf("Evil address is %p\n", evil); if (syscall(__NR_sendmmsg, s, evil, 1, MSG_CMSG_COMPAT) < 0) err(1, "sendmmsg"); return 0; } Cc: David S. Miller Signed-off-by: Andy Lutomirski Signed-off-by: David S. Miller --- net/socket.c | 33 +++++++++++++++++++++++++++++++-- 1 file changed, 31 insertions(+), 2 deletions(-) diff --git a/net/socket.c b/net/socket.c index 6b94633ca61d..9ff6366fee13 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2075,8 +2075,12 @@ SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned int, fla { int fput_needed, err; struct msghdr msg_sys; - struct socket *sock = sockfd_lookup_light(fd, &err, &fput_needed); + struct socket *sock; + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + + sock = sockfd_lookup_light(fd, &err, &fput_needed); if (!sock) goto out; @@ -2149,6 +2153,8 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, SYSCALL_DEFINE4(sendmmsg, int, fd, struct mmsghdr __user *, mmsg, unsigned int, vlen, unsigned int, flags) { + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; return __sys_sendmmsg(fd, mmsg, vlen, flags); } @@ -2249,8 +2255,12 @@ SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg, { int fput_needed, err; struct msghdr msg_sys; - struct socket *sock = sockfd_lookup_light(fd, &err, &fput_needed); + struct socket *sock; + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + + sock = sockfd_lookup_light(fd, &err, &fput_needed); if (!sock) goto out; @@ -2375,6 +2385,9 @@ SYSCALL_DEFINE5(recvmmsg, int, fd, struct mmsghdr __user *, mmsg, int datagrams; struct timespec timeout_sys; + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + if (!timeout) return __sys_recvmmsg(fd, mmsg, vlen, flags, NULL); @@ -2492,15 +2505,31 @@ SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args) (int __user *)a[4]); break; case SYS_SENDMSG: + if (a[2] & MSG_CMSG_COMPAT) { + err = -EINVAL; + break; + } err = sys_sendmsg(a0, (struct msghdr __user *)a1, a[2]); break; case SYS_SENDMMSG: + if (a[3] & MSG_CMSG_COMPAT) { + err = -EINVAL; + break; + } err = sys_sendmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3]); break; case SYS_RECVMSG: + if (a[2] & MSG_CMSG_COMPAT) { + err = -EINVAL; + break; + } err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]); break; case SYS_RECVMMSG: + if (a[3] & MSG_CMSG_COMPAT) { + err = -EINVAL; + break; + } err = sys_recvmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3], (struct timespec __user *)a[4]); break; From cf6c31fc5c3de225348742c95cc6185fca20a2f2 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Mon, 29 Apr 2013 10:04:46 +1000 Subject: [PATCH 178/429] m68k: only use local gpio_request_one if not using GPIOLIB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Compiling for targets that use the local gpio code (not GPIOLIB) fail to compile with: CC arch/m68k/platform/coldfire/device.o In file included from include/linux/gpio.h:45:0, from arch/m68k/platform/coldfire/device.c:15: /home/gerg/new-wave.git/linux-3.x/arch/m68k/include/asm/gpio.h:89:19: error: static declaration of ‘gpio_request_one’ follows non-static declaration include/asm-generic/gpio.h:195:12: note: previous declaration of ‘gpio_request_one’ was here Fix by conditionally using the local gpio_request_one() function based on !CONFIG_GPIOLIB. Signed-off-by: Greg Ungerer --- arch/m68k/include/asm/gpio.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/m68k/include/asm/gpio.h b/arch/m68k/include/asm/gpio.h index 8cc83431805b..2f6eec1e34b4 100644 --- a/arch/m68k/include/asm/gpio.h +++ b/arch/m68k/include/asm/gpio.h @@ -86,6 +86,7 @@ static inline int gpio_cansleep(unsigned gpio) return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio); } +#ifndef CONFIG_GPIOLIB static inline int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) { int err; @@ -105,5 +106,5 @@ static inline int gpio_request_one(unsigned gpio, unsigned long flags, const cha return err; } - +#endif /* !CONFIG_GPIOLIB */ #endif From 456db6a4d495f40777da6f1f32f62f13026f52db Mon Sep 17 00:00:00 2001 From: Federico Vaga Date: Tue, 28 May 2013 05:02:44 +0000 Subject: [PATCH 179/429] net/core/sock.c: add missing VSOCK string in af_family_*_key_strings The three arrays of strings: af_family_key_strings, af_family_slock_key_strings and af_family_clock_key_strings have not VSOCK's string Signed-off-by: Federico Vaga Signed-off-by: David S. Miller --- net/core/sock.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/core/sock.c b/net/core/sock.c index 6ba327da79e1..88868a9d21da 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -210,7 +210,7 @@ static const char *const af_family_key_strings[AF_MAX+1] = { "sk_lock-AF_TIPC" , "sk_lock-AF_BLUETOOTH", "sk_lock-IUCV" , "sk_lock-AF_RXRPC" , "sk_lock-AF_ISDN" , "sk_lock-AF_PHONET" , "sk_lock-AF_IEEE802154", "sk_lock-AF_CAIF" , "sk_lock-AF_ALG" , - "sk_lock-AF_NFC" , "sk_lock-AF_MAX" + "sk_lock-AF_NFC" , "sk_lock-AF_VSOCK" , "sk_lock-AF_MAX" }; static const char *const af_family_slock_key_strings[AF_MAX+1] = { "slock-AF_UNSPEC", "slock-AF_UNIX" , "slock-AF_INET" , @@ -226,7 +226,7 @@ static const char *const af_family_slock_key_strings[AF_MAX+1] = { "slock-AF_TIPC" , "slock-AF_BLUETOOTH", "slock-AF_IUCV" , "slock-AF_RXRPC" , "slock-AF_ISDN" , "slock-AF_PHONET" , "slock-AF_IEEE802154", "slock-AF_CAIF" , "slock-AF_ALG" , - "slock-AF_NFC" , "slock-AF_MAX" + "slock-AF_NFC" , "slock-AF_VSOCK" ,"slock-AF_MAX" }; static const char *const af_family_clock_key_strings[AF_MAX+1] = { "clock-AF_UNSPEC", "clock-AF_UNIX" , "clock-AF_INET" , @@ -242,7 +242,7 @@ static const char *const af_family_clock_key_strings[AF_MAX+1] = { "clock-AF_TIPC" , "clock-AF_BLUETOOTH", "clock-AF_IUCV" , "clock-AF_RXRPC" , "clock-AF_ISDN" , "clock-AF_PHONET" , "clock-AF_IEEE802154", "clock-AF_CAIF" , "clock-AF_ALG" , - "clock-AF_NFC" , "clock-AF_MAX" + "clock-AF_NFC" , "clock-AF_VSOCK" , "clock-AF_MAX" }; /* From 8e6d91ae0917bf934ed86411148f79d904728d51 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Tue, 28 May 2013 18:32:11 +0000 Subject: [PATCH 180/429] tuntap: forbid changing mq flag for persistent device We currently allow changing the mq flag (IFF_MULTI_QUEUE) for a persistent device. This will result a mismatch between the number the queues in netdev and tuntap. This is because we only allocate a 1q netdevice when IFF_MULTI_QUEUE was not specified, so when we set the IFF_MULTI_QUEUE and try to attach more queues later, netif_set_real_num_tx_queues() may fail which result a single queue netdevice with multiple sockets attached. Solve this by disallowing changing the mq flag for persistent device. Bug was introduced by commit edfb6a148ce62e5e19354a1dcd9a34e00815c2a1 (tuntap: reduce memory using of queues). Reported-by: Sriram Narasimhan Cc: Michael S. Tsirkin Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/tun.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index f042b0373e5d..89776c592151 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1585,6 +1585,10 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) else return -EINVAL; + if (!!(ifr->ifr_flags & IFF_MULTI_QUEUE) != + !!(tun->flags & TUN_TAP_MQ)) + return -EINVAL; + if (tun_not_capable(tun)) return -EPERM; err = security_tun_dev_open(tun->security); From e2e2f0ea1c935edcf53feb4c4c8fdb4f86d57dd9 Mon Sep 17 00:00:00 2001 From: Federico Manzan Date: Fri, 24 May 2013 18:18:48 +0200 Subject: [PATCH 181/429] usbfs: Increase arbitrary limit for USB 3 isopkt length Increase the current arbitrary limit for isocronous packet size to a value large enough to account for USB 3.0 super bandwidth streams, bMaxBurst (0~15 allowed, 1~16 packets) bmAttributes (bit 1:0, mult 0~2, 1~3 packets) so the size max for one USB 3 isocronous transfer is 1024 byte * 16 * 3 = 49152 byte Acked-by: Alan Stern Signed-off-by: Federico Manzan Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index caefc800f298..c88c4fb9459d 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1287,9 +1287,13 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, goto error; } for (totlen = u = 0; u < uurb->number_of_packets; u++) { - /* arbitrary limit, - * sufficient for USB 2.0 high-bandwidth iso */ - if (isopkt[u].length > 8192) { + /* + * arbitrary limit need for USB 3.0 + * bMaxBurst (0~15 allowed, 1~16 packets) + * bmAttributes (bit 1:0, mult 0~2, 1~3 packets) + * sizemax: 1024 * 16 * 3 = 49152 + */ + if (isopkt[u].length > 49152) { ret = -EINVAL; goto error; } From d660164d79b67f879db35a7d61e47d3b99bc714e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Kube=C4=8Dek?= Date: Tue, 28 May 2013 22:37:03 +0000 Subject: [PATCH 182/429] netfilter: xt_LOG: fix mark logging for IPv6 packets In dump_ipv6_packet(), the "recurse" parameter is zero only if dumping contents of a packet embedded into an ICMPv6 error message. Therefore we want to log packet mark if recurse is non-zero, not when it is zero. Signed-off-by: Michal Kubecek Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_LOG.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_LOG.c b/net/netfilter/xt_LOG.c index 491c7d821a0b..5ab24843370a 100644 --- a/net/netfilter/xt_LOG.c +++ b/net/netfilter/xt_LOG.c @@ -737,7 +737,7 @@ static void dump_ipv6_packet(struct sbuff *m, dump_sk_uid_gid(m, skb->sk); /* Max length: 16 "MARK=0xFFFFFFFF " */ - if (!recurse && skb->mark) + if (recurse && skb->mark) sb_add(m, "MARK=0x%x ", skb->mark); } From 2abb274629614bef4044a0b98ada42e977feadfd Mon Sep 17 00:00:00 2001 From: Aurelien Chartier Date: Tue, 28 May 2013 18:09:56 +0100 Subject: [PATCH 183/429] xenbus: delay xenbus frontend resume if xenstored is not running If the xenbus frontend is located in a domain running xenstored, the device resume is hanging because it is happening before the process resume. This patch adds extra logic to the resume code to check if we are the domain running xenstored and delay the resume if needed. Signed-off-by: Aurelien Chartier [Changes in v2: - Instead of bypassing the resume, process it in a workqueue] [Changes in v3: - Add a struct work in xenbus_device to avoid dynamic allocation - Several small code fixes] [Changes in v4: - Use a dedicated workqueue] [Changes in v5: - Move create_workqueue error handling to xenbus_frontend_dev_resume] Acked-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_probe_frontend.c | 37 +++++++++++++++++++++- include/xen/xenbus.h | 1 + 2 files changed, 37 insertions(+), 1 deletion(-) diff --git a/drivers/xen/xenbus/xenbus_probe_frontend.c b/drivers/xen/xenbus/xenbus_probe_frontend.c index 3159a37d966d..a7e25073de19 100644 --- a/drivers/xen/xenbus/xenbus_probe_frontend.c +++ b/drivers/xen/xenbus/xenbus_probe_frontend.c @@ -29,6 +29,8 @@ #include "xenbus_probe.h" +static struct workqueue_struct *xenbus_frontend_wq; + /* device// => - */ static int frontend_bus_id(char bus_id[XEN_BUS_ID_SIZE], const char *nodename) { @@ -89,9 +91,40 @@ static void backend_changed(struct xenbus_watch *watch, xenbus_otherend_changed(watch, vec, len, 1); } +static void xenbus_frontend_delayed_resume(struct work_struct *w) +{ + struct xenbus_device *xdev = container_of(w, struct xenbus_device, work); + + xenbus_dev_resume(&xdev->dev); +} + +static int xenbus_frontend_dev_resume(struct device *dev) +{ + /* + * If xenstored is running in this domain, we cannot access the backend + * state at the moment, so we need to defer xenbus_dev_resume + */ + if (xen_store_domain_type == XS_LOCAL) { + struct xenbus_device *xdev = to_xenbus_device(dev); + + if (!xenbus_frontend_wq) { + pr_err("%s: no workqueue to process delayed resume\n", + xdev->nodename); + return -EFAULT; + } + + INIT_WORK(&xdev->work, xenbus_frontend_delayed_resume); + queue_work(xenbus_frontend_wq, &xdev->work); + + return 0; + } + + return xenbus_dev_resume(dev); +} + static const struct dev_pm_ops xenbus_pm_ops = { .suspend = xenbus_dev_suspend, - .resume = xenbus_dev_resume, + .resume = xenbus_frontend_dev_resume, .freeze = xenbus_dev_suspend, .thaw = xenbus_dev_cancel, .restore = xenbus_dev_resume, @@ -440,6 +473,8 @@ static int __init xenbus_probe_frontend_init(void) register_xenstore_notifier(&xenstore_notifier); + xenbus_frontend_wq = create_workqueue("xenbus_frontend"); + return 0; } subsys_initcall(xenbus_probe_frontend_init); diff --git a/include/xen/xenbus.h b/include/xen/xenbus.h index 0a7515c1e3a4..569c07f2e344 100644 --- a/include/xen/xenbus.h +++ b/include/xen/xenbus.h @@ -70,6 +70,7 @@ struct xenbus_device { struct device dev; enum xenbus_state state; struct completion down; + struct work_struct work; }; static inline struct xenbus_device *to_xenbus_device(struct device *dev) From 33c1174bae3ea8f420abce53cf8aded778987583 Mon Sep 17 00:00:00 2001 From: Aurelien Chartier Date: Tue, 28 May 2013 18:09:55 +0100 Subject: [PATCH 184/429] xenbus: save xenstore local status for later use Save the xenstore local status computed in xenbus_init. It can then be used later to check if xenstored is running in this domain. Signed-off-by: Aurelien Chartier [Changes in v4: - Change variable name to xen_store_domain_type] Reviewed-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_comms.h | 1 + drivers/xen/xenbus/xenbus_probe.c | 27 ++++++++++++--------------- drivers/xen/xenbus/xenbus_probe.h | 7 +++++++ 3 files changed, 20 insertions(+), 15 deletions(-) diff --git a/drivers/xen/xenbus/xenbus_comms.h b/drivers/xen/xenbus/xenbus_comms.h index c8abd3b8a6c4..e74f9c1fbd80 100644 --- a/drivers/xen/xenbus/xenbus_comms.h +++ b/drivers/xen/xenbus/xenbus_comms.h @@ -45,6 +45,7 @@ int xb_wait_for_data_to_read(void); int xs_input_avail(void); extern struct xenstore_domain_interface *xen_store_interface; extern int xen_store_evtchn; +extern enum xenstore_init xen_store_domain_type; extern const struct file_operations xen_xenbus_fops; diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c index 3325884c693f..56cfaaa9d006 100644 --- a/drivers/xen/xenbus/xenbus_probe.c +++ b/drivers/xen/xenbus/xenbus_probe.c @@ -69,6 +69,9 @@ EXPORT_SYMBOL_GPL(xen_store_evtchn); struct xenstore_domain_interface *xen_store_interface; EXPORT_SYMBOL_GPL(xen_store_interface); +enum xenstore_init xen_store_domain_type; +EXPORT_SYMBOL_GPL(xen_store_domain_type); + static unsigned long xen_store_mfn; static BLOCKING_NOTIFIER_HEAD(xenstore_chain); @@ -719,17 +722,11 @@ static int __init xenstored_local_init(void) return err; } -enum xenstore_init { - UNKNOWN, - PV, - HVM, - LOCAL, -}; static int __init xenbus_init(void) { int err = 0; - enum xenstore_init usage = UNKNOWN; uint64_t v = 0; + xen_store_domain_type = XS_UNKNOWN; if (!xen_domain()) return -ENODEV; @@ -737,29 +734,29 @@ static int __init xenbus_init(void) xenbus_ring_ops_init(); if (xen_pv_domain()) - usage = PV; + xen_store_domain_type = XS_PV; if (xen_hvm_domain()) - usage = HVM; + xen_store_domain_type = XS_HVM; if (xen_hvm_domain() && xen_initial_domain()) - usage = LOCAL; + xen_store_domain_type = XS_LOCAL; if (xen_pv_domain() && !xen_start_info->store_evtchn) - usage = LOCAL; + xen_store_domain_type = XS_LOCAL; if (xen_pv_domain() && xen_start_info->store_evtchn) xenstored_ready = 1; - switch (usage) { - case LOCAL: + switch (xen_store_domain_type) { + case XS_LOCAL: err = xenstored_local_init(); if (err) goto out_error; xen_store_interface = mfn_to_virt(xen_store_mfn); break; - case PV: + case XS_PV: xen_store_evtchn = xen_start_info->store_evtchn; xen_store_mfn = xen_start_info->store_mfn; xen_store_interface = mfn_to_virt(xen_store_mfn); break; - case HVM: + case XS_HVM: err = hvm_get_parameter(HVM_PARAM_STORE_EVTCHN, &v); if (err) goto out_error; diff --git a/drivers/xen/xenbus/xenbus_probe.h b/drivers/xen/xenbus/xenbus_probe.h index bb4f92ed8730..146f857a36f8 100644 --- a/drivers/xen/xenbus/xenbus_probe.h +++ b/drivers/xen/xenbus/xenbus_probe.h @@ -47,6 +47,13 @@ struct xen_bus_type { struct bus_type bus; }; +enum xenstore_init { + XS_UNKNOWN, + XS_PV, + XS_HVM, + XS_LOCAL, +}; + extern struct device_attribute xenbus_dev_attrs[]; extern int xenbus_match(struct device *_dev, struct device_driver *_drv); From 1db01b4903639fcfaec213701a494fe3fb2c490b Mon Sep 17 00:00:00 2001 From: Stefan Bader Date: Wed, 8 May 2013 16:37:35 +0200 Subject: [PATCH 185/429] xen: Clean up apic ipi interface Commit f447d56d36af18c5104ff29dcb1327c0c0ac3634 introduced the implementation of the PV apic ipi interface. But there were some odd things (it seems none of which cause really any issue but maybe they should be cleaned up anyway): - xen_send_IPI_mask_allbutself (and by that xen_send_IPI_allbutself) ignore the passed in vector and only use the CALL_FUNCTION_SINGLE vector. While xen_send_IPI_all and xen_send_IPI_mask use the vector. - physflat_send_IPI_allbutself is declared unnecessarily. It is never used. This patch tries to clean up those things. Signed-off-by: Stefan Bader Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/smp.c | 10 ++++------ arch/x86/xen/smp.h | 1 - 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 8ff37995d54e..fb44426fe931 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -576,24 +576,22 @@ void xen_send_IPI_mask_allbutself(const struct cpumask *mask, { unsigned cpu; unsigned int this_cpu = smp_processor_id(); + int xen_vector = xen_map_vector(vector); - if (!(num_online_cpus() > 1)) + if (!(num_online_cpus() > 1) || (xen_vector < 0)) return; for_each_cpu_and(cpu, mask, cpu_online_mask) { if (this_cpu == cpu) continue; - xen_smp_send_call_function_single_ipi(cpu); + xen_send_IPI_one(cpu, xen_vector); } } void xen_send_IPI_allbutself(int vector) { - int xen_vector = xen_map_vector(vector); - - if (xen_vector >= 0) - xen_send_IPI_mask_allbutself(cpu_online_mask, xen_vector); + xen_send_IPI_mask_allbutself(cpu_online_mask, vector); } static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id) diff --git a/arch/x86/xen/smp.h b/arch/x86/xen/smp.h index 8981a76d081a..c7c2d89efd76 100644 --- a/arch/x86/xen/smp.h +++ b/arch/x86/xen/smp.h @@ -5,7 +5,6 @@ extern void xen_send_IPI_mask(const struct cpumask *mask, extern void xen_send_IPI_mask_allbutself(const struct cpumask *mask, int vector); extern void xen_send_IPI_allbutself(int vector); -extern void physflat_send_IPI_allbutself(int vector); extern void xen_send_IPI_all(int vector); extern void xen_send_IPI_self(int vector); From d69c0e3975e4955dd596c162d1628ba1dbb1eb45 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2013 13:31:15 +0100 Subject: [PATCH 186/429] xen-pciback: more uses of cached MSI-X capability offset Signed-off-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xen-pciback/pci_stub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c index a2278ba7fb27..4e8ba38aa0c9 100644 --- a/drivers/xen/xen-pciback/pci_stub.c +++ b/drivers/xen/xen-pciback/pci_stub.c @@ -106,7 +106,7 @@ static void pcistub_device_release(struct kref *kref) else pci_restore_state(dev); - if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { + if (dev->msix_cap) { struct physdev_pci_device ppdev = { .seg = pci_domain_nr(dev->bus), .bus = dev->bus->number, @@ -371,7 +371,7 @@ static int pcistub_init_device(struct pci_dev *dev) if (err) goto config_release; - if (pci_find_capability(dev, PCI_CAP_ID_MSIX)) { + if (dev->msix_cap) { struct physdev_pci_device ppdev = { .seg = pci_domain_nr(dev->bus), .bus = dev->bus->number, From afe3c3fd5392b2f0066930abc5dbd3f4b14a0f13 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 24 May 2013 17:24:34 -0400 Subject: [PATCH 187/429] svcrpc: fix failures to handle -1 uid's and gid's As of f025adf191924e3a75ce80e130afcd2485b53bb8 "sunrpc: Properly decode kuids and kgids in RPC_AUTH_UNIX credentials" any rpc containing a -1 (0xffff) uid or gid would fail with a badcred error. Reported symptoms were xmbc clients failing on upgrade of the NFS server; examination of the network trace showed them sending -1 as the gid. Reported-by: Julian Sikorski Tested-by: Julian Sikorski Cc: "Eric W. Biederman" Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields --- net/sunrpc/svcauth_unix.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/net/sunrpc/svcauth_unix.c b/net/sunrpc/svcauth_unix.c index c3f9e1ef7f53..06bdf5a1082c 100644 --- a/net/sunrpc/svcauth_unix.c +++ b/net/sunrpc/svcauth_unix.c @@ -810,11 +810,15 @@ svcauth_unix_accept(struct svc_rqst *rqstp, __be32 *authp) goto badcred; argv->iov_base = (void*)((__be32*)argv->iov_base + slen); /* skip machname */ argv->iov_len -= slen*4; - + /* + * Note: we skip uid_valid()/gid_valid() checks here for + * backwards compatibility with clients that use -1 id's. + * Instead, -1 uid or gid is later mapped to the + * (export-specific) anonymous id by nfsd_setuser. + * Supplementary gid's will be left alone. + */ cred->cr_uid = make_kuid(&init_user_ns, svc_getnl(argv)); /* uid */ cred->cr_gid = make_kgid(&init_user_ns, svc_getnl(argv)); /* gid */ - if (!uid_valid(cred->cr_uid) || !gid_valid(cred->cr_gid)) - goto badcred; slen = svc_getnl(argv); /* gids length */ if (slen > 16 || (len -= (slen + 2)*4) < 0) goto badcred; @@ -823,8 +827,6 @@ svcauth_unix_accept(struct svc_rqst *rqstp, __be32 *authp) return SVC_CLOSE; for (i = 0; i < slen; i++) { kgid_t kgid = make_kgid(&init_user_ns, svc_getnl(argv)); - if (!gid_valid(kgid)) - goto badcred; GROUP_AT(cred->cr_group_info, i) = kgid; } if (svc_getu32(argv) != htonl(RPC_AUTH_NULL) || svc_getu32(argv) != 0) { From 27b0705c68dab67a6c8ffa19869aeca3eaf75d78 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 21 May 2013 17:14:18 +0200 Subject: [PATCH 188/429] drm/radeon: UVD block on SUMO2 is the same as on SUMO MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The chip id for SUMO2 isn't used. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63935 Tested-By: Dave Witbrodt Signed-off-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/rv770.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 83f612a9500b..3fc2985445ee 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -862,10 +862,8 @@ int rv770_uvd_resume(struct radeon_device *rdev) chip_id = 0x0100000b; break; case CHIP_SUMO: - chip_id = 0x0100000c; - break; case CHIP_SUMO2: - chip_id = 0x0100000d; + chip_id = 0x0100000c; break; case CHIP_PALM: chip_id = 0x0100000e; From 468ef1a58c9268ac9709350bf95eaf1c22a69f29 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 21 May 2013 13:35:19 -0400 Subject: [PATCH 189/429] drm/radeon: fix typo in cu_per_sh on verde Should be 5 rather than 2. Noticed by sroland and glisse on IRC. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/si.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 5ffade69af25..d1ba9d88f311 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -2616,7 +2616,7 @@ static void si_gpu_init(struct radeon_device *rdev) default: rdev->config.si.max_shader_engines = 1; rdev->config.si.max_tile_pipes = 4; - rdev->config.si.max_cu_per_sh = 2; + rdev->config.si.max_cu_per_sh = 5; rdev->config.si.max_sh_per_se = 2; rdev->config.si.max_backends_per_se = 4; rdev->config.si.max_texture_channel_caches = 4; From 09fb8bd1a63b0f9f15e655c4fe8d047e5d2bf67a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 22 May 2013 11:22:51 -0400 Subject: [PATCH 190/429] drm/radeon: fix card_posted check for newer asics MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Newer asics have variable numbers of crtcs. Use that rather than the asic family to determine which crtcs to check. This avoids checking non-existent crtcs or missing crtcs on certain asics. Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_device.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index c2c59fb1ea01..89cc8166db94 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -472,18 +472,17 @@ bool radeon_card_posted(struct radeon_device *rdev) return false; /* first check CRTCs */ - if (ASIC_IS_DCE41(rdev)) { + if (ASIC_IS_DCE4(rdev)) { reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) | RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET); - if (reg & EVERGREEN_CRTC_MASTER_EN) - return true; - } else if (ASIC_IS_DCE4(rdev)) { - reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC1_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET) | - RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET); + if (rdev->num_crtc >= 4) { + reg |= RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC2_REGISTER_OFFSET) | + RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC3_REGISTER_OFFSET); + } + if (rdev->num_crtc >= 6) { + reg |= RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET) | + RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET); + } if (reg & EVERGREEN_CRTC_MASTER_EN) return true; } else if (ASIC_IS_AVIVO(rdev)) { From 2cf3a4fcc64e5b54a8a3cd793c6c0024b5d8da6c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 22 May 2013 11:30:34 -0400 Subject: [PATCH 191/429] drm/radeon: don't check crtcs in card_posted() on cards without DCE Skip checking crtcs in hardware without them. Avoids checking non-existent hardware. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_device.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 89cc8166db94..af82c9b6a28b 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -471,6 +471,9 @@ bool radeon_card_posted(struct radeon_device *rdev) rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) return false; + if (ASIC_IS_NODCE(rdev)) + goto check_memsize; + /* first check CRTCs */ if (ASIC_IS_DCE4(rdev)) { reg = RREG32(EVERGREEN_CRTC_CONTROL + EVERGREEN_CRTC0_REGISTER_OFFSET) | @@ -499,6 +502,7 @@ bool radeon_card_posted(struct radeon_device *rdev) } } +check_memsize: /* then check MEM_SIZE, in case the crtcs are off */ if (rdev->family >= CHIP_R600) reg = RREG32(R600_CONFIG_MEMSIZE); From a70b9641e6a90d6821e4354a2c2fede74015db29 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2013 13:33:51 +0100 Subject: [PATCH 192/429] ipvs: ip_vs_sh: fix build kfree_rcu() requires offsetof(..., rcu_head) < 4096, which can get violated with a sufficiently high CONFIG_IP_VS_SH_TAB_BITS. Signed-off-by: Jan Beulich Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_sh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/ipvs/ip_vs_sh.c b/net/netfilter/ipvs/ip_vs_sh.c index 0df269d7c99f..a65edfe4b16c 100644 --- a/net/netfilter/ipvs/ip_vs_sh.c +++ b/net/netfilter/ipvs/ip_vs_sh.c @@ -67,8 +67,8 @@ struct ip_vs_sh_bucket { #define IP_VS_SH_TAB_MASK (IP_VS_SH_TAB_SIZE - 1) struct ip_vs_sh_state { - struct ip_vs_sh_bucket buckets[IP_VS_SH_TAB_SIZE]; struct rcu_head rcu_head; + struct ip_vs_sh_bucket buckets[IP_VS_SH_TAB_SIZE]; }; /* From 50a583f64bfe53aae4996965c1d1b25d90ce4f64 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 22 May 2013 13:29:33 -0400 Subject: [PATCH 193/429] drm/radeon: narrow scope of Apple re-POST hack This narrows the scope of the apple re-POST hack added in: drm/radeon: re-POST the asic on Apple hardware when booted via EFI That patch prevents UVD from working on macs when booted in EFI mode. The original patch fixed macbook2,1 systems which were r5xx and hence have no UVD. Limit the hack to those systems to prevent UVD breakage on newer systems. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63935 Cc: Matthew Garrett Signed-off-by: Alex Deucher Acked-by: Matthew Garrett --- drivers/gpu/drm/radeon/radeon_device.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index af82c9b6a28b..189973836cff 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -467,8 +467,10 @@ bool radeon_card_posted(struct radeon_device *rdev) { uint32_t reg; + /* required for EFI mode on macbook2,1 which uses an r5xx asic */ if (efi_enabled(EFI_BOOT) && - rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) + (rdev->pdev->subsystem_vendor == PCI_VENDOR_ID_APPLE) && + (rdev->family < CHIP_R600)) return false; if (ASIC_IS_NODCE(rdev)) From 7e0e41963740525af702bb23edede8ae9afc4ac0 Mon Sep 17 00:00:00 2001 From: Kleber Sacilotto de Souza Date: Fri, 3 May 2013 19:43:13 -0300 Subject: [PATCH 194/429] radeon: use max_bus_speed to activate gen2 speeds radeon currently uses a drm function to get the speed capabilities for the bus, drm_pcie_get_speed_cap_mask. However, this is a non-standard method of performing this detection and this patch changes it to use the max_bus_speed attribute. From: Lucas Kannebley Tavares Signed-off-by: Kleber Sacilotto de Souza Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/evergreen.c | 10 +++------- drivers/gpu/drm/radeon/r600.c | 9 ++------- drivers/gpu/drm/radeon/rv770.c | 9 ++------- 3 files changed, 7 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 8f9e2d31b255..8546e3b333b4 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -4999,8 +4999,7 @@ void evergreen_fini(struct radeon_device *rdev) void evergreen_pcie_gen2_enable(struct radeon_device *rdev) { - u32 link_width_cntl, speed_cntl, mask; - int ret; + u32 link_width_cntl, speed_cntl; if (radeon_pcie_gen2 == 0) return; @@ -5015,11 +5014,8 @@ void evergreen_pcie_gen2_enable(struct radeon_device *rdev) if (ASIC_IS_X2(rdev)) return; - ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask); - if (ret != 0) - return; - - if (!(mask & DRM_PCIE_SPEED_50)) + if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) && + (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT)) return; speed_cntl = RREG32_PCIE_PORT(PCIE_LC_SPEED_CNTL); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 1a08008c978b..b45e64848677 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -4631,8 +4631,6 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev) { u32 link_width_cntl, lanes, speed_cntl, training_cntl, tmp; u16 link_cntl2; - u32 mask; - int ret; if (radeon_pcie_gen2 == 0) return; @@ -4651,11 +4649,8 @@ static void r600_pcie_gen2_enable(struct radeon_device *rdev) if (rdev->family <= CHIP_R600) return; - ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask); - if (ret != 0) - return; - - if (!(mask & DRM_PCIE_SPEED_50)) + if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) && + (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT)) return; speed_cntl = RREG32_PCIE_PORT(PCIE_LC_SPEED_CNTL); diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 3fc2985445ee..08aef24afe40 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -2111,8 +2111,6 @@ static void rv770_pcie_gen2_enable(struct radeon_device *rdev) { u32 link_width_cntl, lanes, speed_cntl, tmp; u16 link_cntl2; - u32 mask; - int ret; if (radeon_pcie_gen2 == 0) return; @@ -2127,11 +2125,8 @@ static void rv770_pcie_gen2_enable(struct radeon_device *rdev) if (ASIC_IS_X2(rdev)) return; - ret = drm_pcie_get_speed_cap_mask(rdev->ddev, &mask); - if (ret != 0) - return; - - if (!(mask & DRM_PCIE_SPEED_50)) + if ((rdev->pdev->bus->max_bus_speed != PCIE_SPEED_5_0GT) && + (rdev->pdev->bus->max_bus_speed != PCIE_SPEED_8_0GT)) return; DRM_INFO("enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0\n"); From dd4704480372fdbf3e8f7826274a883c4c7c335a Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Wed, 8 May 2013 14:29:03 +0100 Subject: [PATCH 195/429] clk: ux500: Provide device enumeration number suffix for SMSC911x First Ethernet device has a ".0" appended onto the device name. It appears that we need this in order to obtain the correct clock. Without this fix Ethernet does not function on Ux500 devices, which is a regression. Cc: Ulf Hansson Signed-off-by: Lee Jones Signed-off-by: Mike Turquette [mturquette@linaro.org: improved changelog] --- drivers/clk/ux500/u8500_clk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index 0b4f35a5ffc2..80069c370a47 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -325,7 +325,7 @@ void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", clkrst3_base, BIT(0), 0); clk_register_clkdev(clk, "fsmc", NULL); - clk_register_clkdev(clk, NULL, "smsc911x"); + clk_register_clkdev(clk, NULL, "smsc911x.0"); clk = clk_reg_prcc_pclk("p3_pclk1", "per3clk", clkrst3_base, BIT(1), 0); From f586938ba2cf83ed4cbebe96436220d182a7808e Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Tue, 30 Apr 2013 14:45:06 +0200 Subject: [PATCH 196/429] clk: ux500: clk-sysctrl: handle clocks with no parents Fix clk_reg_sysctrl() to set main clock registers of new struct clk_sysctrl even if the registered clock has no parents. This fixes an issue where "ulpclk" was registered with all clk->reg_* fields uninitialized, causing a -EINVAL error from clk_prepare(). Signed-off-by: Fabio Baltieri Acked-by: Ulf Hansson Signed-off-by: Mike Turquette --- drivers/clk/ux500/clk-sysctrl.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/clk/ux500/clk-sysctrl.c b/drivers/clk/ux500/clk-sysctrl.c index bc7e9bde792b..e364c9d4aa60 100644 --- a/drivers/clk/ux500/clk-sysctrl.c +++ b/drivers/clk/ux500/clk-sysctrl.c @@ -145,7 +145,13 @@ static struct clk *clk_reg_sysctrl(struct device *dev, return ERR_PTR(-ENOMEM); } - for (i = 0; i < num_parents; i++) { + /* set main clock registers */ + clk->reg_sel[0] = reg_sel[0]; + clk->reg_bits[0] = reg_bits[0]; + clk->reg_mask[0] = reg_mask[0]; + + /* handle clocks with more than one parent */ + for (i = 1; i < num_parents; i++) { clk->reg_sel[i] = reg_sel[i]; clk->reg_bits[i] = reg_bits[i]; clk->reg_mask[i] = reg_mask[i]; From 056f3d58db6f7d19be7dbc2aab8d049f28e20d6e Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 10 May 2013 18:38:09 +0200 Subject: [PATCH 197/429] clk: samsung: Add CLK_IGNORE_UNUSED flag for the sysreg clocks Currently no driver *) handles the sysreg clock, with an assumption that this clock is always left in its default state (enabled). Before commit 6e6aac7590f902d14d90bace3fd499 ARM: EXYNOS: Migrate clock support to common clock framework the sysreg clock was not even defined and hence wasn't handled explicitly in the kernel. To restore the previous behaviour disable masking the sysreg clock off in the clock core by default. *) Except the Exynos4x12 FIMC-IS driver, which will be modified to not touch the sysreg clock. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mike Turquette --- drivers/clk/samsung/clk-exynos4.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index d0940e69d034..3c1f88868f29 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -791,7 +791,8 @@ struct samsung_gate_clock exynos4210_gate_clks[] __initdata = { GATE(smmu_pcie, "smmu_pcie", "aclk133", GATE_IP_FSYS, 18, 0, 0), GATE(modemif, "modemif", "aclk100", GATE_IP_PERIL, 28, 0, 0), GATE(chipid, "chipid", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0), - GATE(sysreg, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0), + GATE(sysreg, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0, + CLK_IGNORE_UNUSED, 0), GATE(hdmi_cec, "hdmi_cec", "aclk100", E4210_GATE_IP_PERIR, 11, 0, 0), GATE(smmu_rotator, "smmu_rotator", "aclk200", E4210_GATE_IP_IMAGE, 4, 0, 0), @@ -819,7 +820,8 @@ struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = { GATE(smmu_mdma, "smmu_mdma", "aclk200", E4X12_GATE_IP_IMAGE, 5, 0, 0), GATE(mipi_hsi, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0), GATE(chipid, "chipid", "aclk100", E4X12_GATE_IP_PERIR, 0, 0, 0), - GATE(sysreg, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1, 0, 0), + GATE(sysreg, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1, + CLK_IGNORE_UNUSED, 0), GATE(hdmi_cec, "hdmi_cec", "aclk100", E4X12_GATE_IP_PERIR, 11, 0, 0), GATE(sclk_mdnie0, "sclk_mdnie0", "div_mdnie0", SRC_MASK_LCD0, 4, CLK_SET_RATE_PARENT, 0), From 8d0b8801c9e4c2c6b20cdac74dbab16facce7653 Mon Sep 17 00:00:00 2001 From: Wei Liu Date: Wed, 29 May 2013 17:02:58 +0100 Subject: [PATCH 198/429] xenbus_client.c: correct exit path for xenbus_map_ring_valloc_hvm Apparently we should not free page that has not been allocated. This is b/c alloc_xenballooned_pages will take care of freeing the page on its own. Signed-off-by: Wei Liu Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_client.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c index 61786be9138b..ec097d6f964d 100644 --- a/drivers/xen/xenbus/xenbus_client.c +++ b/drivers/xen/xenbus/xenbus_client.c @@ -534,7 +534,7 @@ static int xenbus_map_ring_valloc_hvm(struct xenbus_device *dev, err = xenbus_map_ring(dev, gnt_ref, &node->handle, addr); if (err) - goto out_err; + goto out_err_free_ballooned_pages; spin_lock(&xenbus_valloc_lock); list_add(&node->next, &xenbus_valloc_pages); @@ -543,8 +543,9 @@ static int xenbus_map_ring_valloc_hvm(struct xenbus_device *dev, *vaddr = addr; return 0; - out_err: + out_err_free_ballooned_pages: free_xenballooned_pages(1, &node->page); + out_err: kfree(node); return err; } From 0184d50f9fd17658c232d6ee6d465a87f989d706 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Wed, 29 May 2013 15:56:49 -0400 Subject: [PATCH 199/429] tracing: Fix bad parameter passed in branch selftest The branch selftest calls trace_test_buffer(), but with the new code it expects the first parameter to be a pointer to a struct trace_buffer. All self tests were changed but the branch selftest was missed. This caused either a crash or failed test when the branch selftest was enabled. Link: http://lkml.kernel.org/r/20130529141333.GA24064@localhost Reported-by: Fengguang Wu Signed-off-by: Steven Rostedt --- kernel/trace/trace_selftest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index 55e2cf66967b..2901e3b88590 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -1159,7 +1159,7 @@ trace_selftest_startup_branch(struct tracer *trace, struct trace_array *tr) /* stop the tracing. */ tracing_stop(); /* check the trace buffer */ - ret = trace_test_buffer(tr, &count); + ret = trace_test_buffer(&tr->trace_buffer, &count); trace->reset(tr); tracing_start(); From f448badd34700ae728a32ba024249626d49c10e1 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 29 May 2013 15:36:40 -0400 Subject: [PATCH 200/429] NFSv4: Fix a thinko in nfs4_try_open_cached We need to pass the full open mode flags to nfs_may_open() when doing a delegated open. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 4e2fe714d5c2..d7ba5616989c 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1078,7 +1078,7 @@ static struct nfs4_state *nfs4_try_open_cached(struct nfs4_opendata *opendata) struct nfs4_state *state = opendata->state; struct nfs_inode *nfsi = NFS_I(state->inode); struct nfs_delegation *delegation; - int open_mode = opendata->o_arg.open_flags & (O_EXCL|O_TRUNC); + int open_mode = opendata->o_arg.open_flags; fmode_t fmode = opendata->o_arg.fmode; nfs4_stateid stateid; int ret = -EAGAIN; From 67e1e2268e598861dc771e3c976daf07db380638 Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Fri, 3 May 2013 07:53:22 +0200 Subject: [PATCH 201/429] clk: si5351: Fix clkout rate computation. Rate was incorrectly computed because we read from wrong divider register. Signed-off-by: Marek Belisko Acked-by: Sebastian Hesselbarth Signed-off-by: Mike Turquette Cc: stable@kernel.org --- drivers/clk/clk-si5351.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c index 892728412e9d..cf39e530e6e2 100644 --- a/drivers/clk/clk-si5351.c +++ b/drivers/clk/clk-si5351.c @@ -932,7 +932,7 @@ static unsigned long si5351_clkout_recalc_rate(struct clk_hw *hw, unsigned char reg; unsigned char rdiv; - if (hwdata->num > 5) + if (hwdata->num <= 5) reg = si5351_msynth_params_address(hwdata->num) + 2; else reg = SI5351_CLK6_7_OUTPUT_DIVIDER; From 6532cb71fb31436b8d31818a056f45b8f95dfb31 Mon Sep 17 00:00:00 2001 From: Marek Belisko Date: Fri, 3 May 2013 07:53:23 +0200 Subject: [PATCH 202/429] clk: si5351: Set initial clkout rate when defined in platform data. clock-frequency property from platform data was read but never used. Apply defined rate when clock is registered. Signed-off-by: Marek Belisko Acked-by: Sebastian Hesselbarth Signed-off-by: Mike Turquette [mturquette@linaro.org: add missing changelog] Cc: stable@kernel.org Signed-off-by: Mike Turquette --- drivers/clk/clk-si5351.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c index cf39e530e6e2..24f553673b72 100644 --- a/drivers/clk/clk-si5351.c +++ b/drivers/clk/clk-si5351.c @@ -1477,6 +1477,16 @@ static int si5351_i2c_probe(struct i2c_client *client, return -EINVAL; } drvdata->onecell.clks[n] = clk; + + /* set initial clkout rate */ + if (pdata->clkout[n].rate != 0) { + int ret; + ret = clk_set_rate(clk, pdata->clkout[n].rate); + if (ret != 0) { + dev_err(&client->dev, "Cannot set rate : %d\n", + ret); + } + } } ret = of_clk_add_provider(client->dev.of_node, of_clk_src_onecell_get, From 063f4661fde8c03c4c03f8a205071a52691c152e Mon Sep 17 00:00:00 2001 From: Dirk Gouders Date: Sun, 19 May 2013 21:48:44 +0200 Subject: [PATCH 203/429] mconf: handle keys in empty dialogs When entering an empty dialog, using the movement keys resulted in unexpected characters beeing displayed, other keys like "z" and "h" did not work as expected. This patch handles the movement keys as well as other keys, especially "z", "h" and "/". Signed-off-by: Dirk Gouders [yann.morin.1998@free.fr: keep lines <80 chars, so reorder test] Tested-by: "Yann E. MORIN" Reviewed-by: "Yann E. MORIN" Signed-off-by: "Yann E. MORIN" --- scripts/kconfig/lxdialog/menubox.c | 9 +++++---- scripts/kconfig/mconf.c | 11 ++++++----- 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/scripts/kconfig/lxdialog/menubox.c b/scripts/kconfig/lxdialog/menubox.c index 48d382e7e374..38cd69c5660e 100644 --- a/scripts/kconfig/lxdialog/menubox.c +++ b/scripts/kconfig/lxdialog/menubox.c @@ -303,10 +303,11 @@ do_resize: } } - if (i < max_choice || - key == KEY_UP || key == KEY_DOWN || - key == '-' || key == '+' || - key == KEY_PPAGE || key == KEY_NPAGE) { + if (item_count() != 0 && + (i < max_choice || + key == KEY_UP || key == KEY_DOWN || + key == '-' || key == '+' || + key == KEY_PPAGE || key == KEY_NPAGE)) { /* Remove highligt of current item */ print_item(scroll + choice, choice, FALSE); diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c index 387dc8daf7b2..a69cbd78fb38 100644 --- a/scripts/kconfig/mconf.c +++ b/scripts/kconfig/mconf.c @@ -670,11 +670,12 @@ static void conf(struct menu *menu, struct menu *active_menu) active_menu, &s_scroll); if (res == 1 || res == KEY_ESC || res == -ERRDISPLAYTOOSMALL) break; - if (!item_activate_selected()) - continue; - if (!item_tag()) - continue; - + if (item_count() != 0) { + if (!item_activate_selected()) + continue; + if (!item_tag()) + continue; + } submenu = item_data(); active_menu = item_data(); if (submenu) From e983b7b17ad1a978e954e6aaa62cf12bfc747883 Mon Sep 17 00:00:00 2001 From: Dirk Gouders Date: Tue, 21 May 2013 10:54:11 +0200 Subject: [PATCH 204/429] kconfig/menu.c: fix multiple references to expressions in menu_add_prop() menu_add_prop() applies upper menus' visibilities to actual prompts by AND-ing the prompts visibilities with the upper menus ones. This creates a further reference to the menu's visibilities and when the expression reduction functions do their work, they may remove or modify expressions that have multiple references, thus causing unpredictable side-effects. The following example Kconfig constructs a case where this causes problems: a menu and a prompt which's visibilities depend on the same symbol. When invoking mconf with this Kconfig and pressing "Z" we see a problem caused by a free'd expression still referenced by the menu's visibility: ------------------------------------------------------------------------ mainmenu "Kconfig Testing Configuration" config VISIBLE def_bool n config Placeholder bool "Place holder" menu "Invisible" visible if VISIBLE config TEST_VAR bool "Test option" if VISIBLE endmenu ------------------------------------------------------------------------ This patch fixes this problem by creating copies of the menu's visibility expressions before AND-ing them with the prompt's one. Signed-off-by: Dirk Gouders [yann.morin.1998@free.fr: move variable into its block-scope, keep lines <80 chars, typo] Tested-by: "Yann E. MORIN" Reviewed-by: "Yann E. MORIN" Signed-off-by: "Yann E. MORIN" --- scripts/kconfig/menu.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index b5c7d90df9df..fd3f0180e08f 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -146,11 +146,24 @@ struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *e struct menu *menu = current_entry; while ((menu = menu->parent) != NULL) { + struct expr *dup_expr; + if (!menu->visibility) continue; + /* + * Do not add a reference to the + * menu's visibility expression but + * use a copy of it. Otherwise the + * expression reduction functions + * will modify expressions that have + * multiple references which can + * cause unwanted side effects. + */ + dup_expr = expr_copy(menu->visibility); + prop->visible.expr = expr_alloc_and(prop->visible.expr, - menu->visibility); + dup_expr); } } From 419e321df8d7d605f21f980903befc65ee66e848 Mon Sep 17 00:00:00 2001 From: Tony Prisk Date: Sat, 18 May 2013 09:18:49 +1200 Subject: [PATCH 205/429] clk: vt8500: Fix unbalanced spinlock in vt8500_dclk_set_rate() With the addition of a DVO clock, a bug is now evident in the vt8500 clock code: [ 0.290000] WARNING: at init/main.c:698 do_one_initcall+0x158/0x18c() [ 0.300000] initcall wm8505fb_driver_init+0x0/0xc returned with disabled int This is caused by an unbalanced spinlock in vt8500_dclk_set_rate(). Replace the second call to spin_lock_irqsave() with spin_unlock_irqrestore(). Signed-off-by: Tony Prisk Signed-off-by: Mike Turquette --- drivers/clk/clk-vt8500.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c index debf688afa8e..553ac35bcc91 100644 --- a/drivers/clk/clk-vt8500.c +++ b/drivers/clk/clk-vt8500.c @@ -183,7 +183,7 @@ static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate, writel(divisor, cdev->div_reg); vt8500_pmc_wait_busy(); - spin_lock_irqsave(cdev->lock, flags); + spin_unlock_irqrestore(cdev->lock, flags); return 0; } From 9b31a328e344e62e7cc98ae574edcb7b674719bb Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 15 May 2013 00:52:44 -0700 Subject: [PATCH 206/429] target: Re-instate sess_wait_list for target_wait_for_sess_cmds Switch back to pre commit 1c7b13fe652 list splicing logic for active I/O shutdown with tcm_qla2xxx + ib_srpt fabrics. The original commit was done under the incorrect assumption that it's safe to walk se_sess->sess_cmd_list unprotected in target_wait_for_sess_cmds() after sess->sess_tearing_down = 1 has been set by target_sess_cmd_list_set_waiting() during session shutdown. So instead of adding sess->sess_cmd_lock protection around sess->sess_cmd_list during target_wait_for_sess_cmds(), switch back to sess->sess_wait_list to allow wait_for_completion() + TFO->release_cmd() to occur without having to walk ->sess_cmd_list after the list_splice. Also add a check to exit if target_sess_cmd_list_set_waiting() has already been called, and add a WARN_ON to check for any fabric bug where new se_cmds are added to sess->sess_cmd_list after sess->sess_tearing_down = 1 has already been set. Cc: Joern Engel Cc: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 18 ++++++++++++++---- include/target/target_core_base.h | 1 + 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 311c11349aab..bbca144821c5 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -221,6 +221,7 @@ struct se_session *transport_init_session(void) INIT_LIST_HEAD(&se_sess->sess_list); INIT_LIST_HEAD(&se_sess->sess_acl_list); INIT_LIST_HEAD(&se_sess->sess_cmd_list); + INIT_LIST_HEAD(&se_sess->sess_wait_list); spin_lock_init(&se_sess->sess_cmd_lock); kref_init(&se_sess->sess_kref); @@ -2250,11 +2251,14 @@ void target_sess_cmd_list_set_waiting(struct se_session *se_sess) unsigned long flags; spin_lock_irqsave(&se_sess->sess_cmd_lock, flags); - - WARN_ON(se_sess->sess_tearing_down); + if (se_sess->sess_tearing_down) { + spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + return; + } se_sess->sess_tearing_down = 1; + list_splice_init(&se_sess->sess_cmd_list, &se_sess->sess_wait_list); - list_for_each_entry(se_cmd, &se_sess->sess_cmd_list, se_cmd_list) + list_for_each_entry(se_cmd, &se_sess->sess_wait_list, se_cmd_list) se_cmd->cmd_wait_set = 1; spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); @@ -2267,9 +2271,10 @@ EXPORT_SYMBOL(target_sess_cmd_list_set_waiting); void target_wait_for_sess_cmds(struct se_session *se_sess) { struct se_cmd *se_cmd, *tmp_cmd; + unsigned long flags; list_for_each_entry_safe(se_cmd, tmp_cmd, - &se_sess->sess_cmd_list, se_cmd_list) { + &se_sess->sess_wait_list, se_cmd_list) { list_del(&se_cmd->se_cmd_list); pr_debug("Waiting for se_cmd: %p t_state: %d, fabric state:" @@ -2283,6 +2288,11 @@ void target_wait_for_sess_cmds(struct se_session *se_sess) se_cmd->se_tfo->release_cmd(se_cmd); } + + spin_lock_irqsave(&se_sess->sess_cmd_lock, flags); + WARN_ON(!list_empty(&se_sess->sess_cmd_list)); + spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); + } EXPORT_SYMBOL(target_wait_for_sess_cmds); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index e773dfa5f98f..4ea4f985f394 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -543,6 +543,7 @@ struct se_session { struct list_head sess_list; struct list_head sess_acl_list; struct list_head sess_cmd_list; + struct list_head sess_wait_list; spinlock_t sess_cmd_lock; struct kref sess_kref; }; From 1d19f7800d643b270b28d0a969c5eca455d54397 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 15 May 2013 01:30:01 -0700 Subject: [PATCH 207/429] ib_srpt: Call target_sess_cmd_list_set_waiting during shutdown_session Given that srpt_release_channel_work() calls target_wait_for_sess_cmds() to allow outstanding se_cmd_t->cmd_kref a change to complete, the call to perform target_sess_cmd_list_set_waiting() needs to happen in srpt_shutdown_session() Also, this patch adds an explicit call to srpt_shutdown_session() within srpt_drain_channel() so that target_sess_cmd_list_set_waiting() will be called in the cases where TFO->shutdown_session() is not triggered directly by TCM. Cc: Joern Engel Cc: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/infiniband/ulp/srpt/ib_srpt.c | 32 ++++++++++++++++++++------- drivers/infiniband/ulp/srpt/ib_srpt.h | 1 + 2 files changed, 25 insertions(+), 8 deletions(-) diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 564024e0123a..3f3f0416fbdd 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -2226,6 +2226,27 @@ static void srpt_close_ch(struct srpt_rdma_ch *ch) spin_unlock_irq(&sdev->spinlock); } +/** + * srpt_shutdown_session() - Whether or not a session may be shut down. + */ +static int srpt_shutdown_session(struct se_session *se_sess) +{ + struct srpt_rdma_ch *ch = se_sess->fabric_sess_ptr; + unsigned long flags; + + spin_lock_irqsave(&ch->spinlock, flags); + if (ch->in_shutdown) { + spin_unlock_irqrestore(&ch->spinlock, flags); + return true; + } + + ch->in_shutdown = true; + target_sess_cmd_list_set_waiting(se_sess); + spin_unlock_irqrestore(&ch->spinlock, flags); + + return true; +} + /** * srpt_drain_channel() - Drain a channel by resetting the IB queue pair. * @cm_id: Pointer to the CM ID of the channel to be drained. @@ -2264,6 +2285,9 @@ static void srpt_drain_channel(struct ib_cm_id *cm_id) spin_unlock_irq(&sdev->spinlock); if (do_reset) { + if (ch->sess) + srpt_shutdown_session(ch->sess); + ret = srpt_ch_qp_err(ch); if (ret < 0) printk(KERN_ERR "Setting queue pair in error state" @@ -3466,14 +3490,6 @@ static void srpt_release_cmd(struct se_cmd *se_cmd) spin_unlock_irqrestore(&ch->spinlock, flags); } -/** - * srpt_shutdown_session() - Whether or not a session may be shut down. - */ -static int srpt_shutdown_session(struct se_session *se_sess) -{ - return true; -} - /** * srpt_close_session() - Forcibly close a session. * diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.h b/drivers/infiniband/ulp/srpt/ib_srpt.h index 4caf55cda7b1..3dae156905de 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.h +++ b/drivers/infiniband/ulp/srpt/ib_srpt.h @@ -325,6 +325,7 @@ struct srpt_rdma_ch { u8 sess_name[36]; struct work_struct release_work; struct completion *release_done; + bool in_shutdown; }; /** From 1e00227d4e8017ac9c3f73bf949a06c6e27f5122 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:02 +0100 Subject: [PATCH 208/429] MN10300: Fix ret_from_kernel_thread ret_from_kernel_thread needs to set A2 to the thread_info pointer before jumping to syscall_exit. Without this, we never correctly start userspace. This was caused by the rejuggling of the fork/exec paths in commit ddf23e87a804 ("mn10300: switch to saner kernel_execve() semantics") Reported-by: Ken Cox Signed-off-by: David Howells Acked-by: Ken Cox Acked-by: Al Viro Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/entry.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 68fcab8f8f6f..942005753720 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -60,6 +60,7 @@ ENTRY(ret_from_kernel_thread) mov (REG_D0,fp),d0 mov (REG_A0,fp),a0 calls (a0) + GET_THREAD_INFO a2 # A2 must be set on return from sys_exit() clr d0 mov d0,(REG_D0,fp) jmp syscall_exit From d17fc238ac1486906ff724b4a5fe4ec169f554c5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:10 +0100 Subject: [PATCH 209/429] MN10300: Enable IRQs more in system call exit work path Enable IRQs when calling schedule() for TIF_NEED_RESCHED and do_notify_resume(). If interrupts are enabled during do_notify_resume(), a warning can be seen (see lower down). Whilst we're at it, resume_userspace can be made local to entry.S as it is not called outside of there and it can be merged with the part of work_resched that occurs after schedule() is called. WARNING: at kernel/softirq.c:160 local_bh_enable+0x42/0xa0() Call Trace: local_bh_enable+0x42/0xa0 unix_release_sock+0x86/0x23c unix_release+0x20/0x28 sock_release+0x17/0x88 sock_close+0x20/0x28 __fput+0xc9/0x1fc ____fput+0xb/0x10 task_work_run+0x64/0x78 do_notify_resume+0x53d/0x544 work_notifysig+0xa/0xc Signed-off-by: David Howells Acked-by: Ken Cox Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/entry.S | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index 942005753720..222152a3f751 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -108,10 +108,10 @@ syscall_exit_work: and EPSW_nSL,d0 beq resume_kernel # returning to supervisor mode - btst _TIF_SYSCALL_TRACE,d2 - beq work_pending LOCAL_IRQ_ENABLE # could let syscall_trace_exit() call # schedule() instead + btst _TIF_SYSCALL_TRACE,d2 + beq work_pending mov fp,d0 call syscall_trace_exit[],0 # do_syscall_trace(regs) jmp resume_userspace @@ -124,6 +124,7 @@ work_pending: work_resched: call schedule[],0 +resume_userspace: # make sure we don't miss an interrupt setting need_resched or # sigpending between sampling and the rti LOCAL_IRQ_DISABLE @@ -132,6 +133,8 @@ work_resched: mov (TI_flags,a2),d2 btst _TIF_WORK_MASK,d2 beq restore_all + + LOCAL_IRQ_ENABLE btst _TIF_NEED_RESCHED,d2 bne work_resched @@ -170,17 +173,6 @@ ret_from_intr: and EPSW_nSL,d0 beq resume_kernel # returning to supervisor mode -ENTRY(resume_userspace) - # make sure we don't miss an interrupt setting need_resched or - # sigpending between sampling and the rti - LOCAL_IRQ_DISABLE - - # is there any work to be done on int/exception return? - mov (TI_flags,a2),d2 - btst _TIF_WORK_MASK,d2 - bne work_pending - jmp restore_all - #ifdef CONFIG_PREEMPT ENTRY(resume_kernel) LOCAL_IRQ_DISABLE From b8bc9b0237873e814266566f84003d73799f170f Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:17 +0100 Subject: [PATCH 210/429] MN10300: ASB2305's PCI code needs the definition of XIRQ1 The code for PCI in the ASB2305 needs the definition of XIRQ1 from proc/irq.h otherwise the following error appears: arch/mn10300/unit-asb2305/pci.c: In function 'unit_pci_init': arch/mn10300/unit-asb2305/pci.c:481: error: 'XIRQ1' undeclared (first use in this function) arch/mn10300/unit-asb2305/pci.c:481: error: (Each undeclared identifier is reported only once arch/mn10300/unit-asb2305/pci.c:481: error: for each function it appears in.) Signed-off-by: David Howells Acked-by: Ken Cox Signed-off-by: Linus Torvalds --- arch/mn10300/unit-asb2305/pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index 1adcf024bb9a..e37fac0461f3 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "pci-asb2305.h" unsigned int pci_probe = 1; From 1aeeac7ad484e1bea6fe602880893b3074adb40a Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 28 May 2013 20:21:25 +0100 Subject: [PATCH 211/429] MN10300: Need pci_iomap() and __pci_ioport_map() defining Include the generic definitions of pci_iomap() and __pci_ioport_map() otherwise we can get errors like: lib/pci_iomap.c: In function 'pci_iomap': lib/pci_iomap.c:37: error: implicit declaration of function '__pci_ioport_map' lib/pci_iomap.c:37: warning: return makes pointer from integer without a cast and: drivers/pci/quirks.c: In function 'disable_igfx_irq': drivers/pci/quirks.c:2893: error: implicit declaration of function 'pci_iomap' drivers/pci/quirks.c:2893: warning: initialization makes pointer from integer without a cast drivers/pci/quirks.c: In function 'reset_ivb_igd': drivers/pci/quirks.c:3133: warning: assignment makes pointer from integer without a cast Signed-off-by: David Howells Acked-by: Ken Cox Signed-off-by: Linus Torvalds --- arch/mn10300/include/asm/pci.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h index 8137c25c4e15..6f31cc0f1a87 100644 --- a/arch/mn10300/include/asm/pci.h +++ b/arch/mn10300/include/asm/pci.h @@ -103,4 +103,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? 15 : 14; } +#include + #endif /* _ASM_PCI_H */ From 3f4d6364084ca0525591836eba4a59f04bb85c68 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Wed, 8 May 2013 16:09:06 +0530 Subject: [PATCH 212/429] regulator: palmas: Fix incorrect condition Since 'id' cannot take two values at the same time, the condition should probably be an OR (||) instead of AND (&&). Introduced by commit 28d1e8cd67 ("regulator: palma: add ramp delay support through regulator constraints"). Signed-off-by: Sachin Kamat Signed-off-by: Mark Brown --- drivers/regulator/palmas-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 92ceed0fc65e..ced74167a600 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -840,7 +840,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) break; } - if ((id == PALMAS_REG_SMPS6) && (id == PALMAS_REG_SMPS8)) + if ((id == PALMAS_REG_SMPS6) || (id == PALMAS_REG_SMPS8)) ramp_delay_support = true; if (ramp_delay_support) { From f232168df0c7e7414b70ac5d8fed83086d441c0b Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 30 May 2013 15:55:09 +0530 Subject: [PATCH 213/429] regulator: palmas: Fix "enable_reg" to point to the correct reg for SMPS10 regulator_enable_regmap() uses enable_reg to enable the regulator. But enable_reg for smps10 points to SMPS10_STATUS which is a read-only register. Fixed the same by having enable_reg set to SMPS10_CTRL. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/regulator/palmas-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index ced74167a600..3ae44ac12a94 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -878,7 +878,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) pmic->desc[id].vsel_mask = SMPS10_VSEL; pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, - PALMAS_SMPS10_STATUS); + PALMAS_SMPS10_CTRL); pmic->desc[id].enable_mask = SMPS10_BOOST_EN; pmic->desc[id].min_uV = 3750000; pmic->desc[id].uV_step = 1250000; From 308853139fcd440e4ca28d844678c7e69fb40826 Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Fri, 24 May 2013 16:27:56 -0700 Subject: [PATCH 214/429] staging: dwc2: fix value of dma_mask Passing the value DMA_BIT_MASK(31) to dma_set_mask() causes the dwc2-pci driver to sometimes fail (cannot enumerate the connected device). Change it to DMA_BIT_MASK(32) instead, which is a more sensible value anyway. Signed-off-by: Paul Zimmerman Signed-off-by: Greg Kroah-Hartman --- drivers/staging/dwc2/hcd.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/staging/dwc2/hcd.c b/drivers/staging/dwc2/hcd.c index 827ab781ae9b..8551ccedf037 100644 --- a/drivers/staging/dwc2/hcd.c +++ b/drivers/staging/dwc2/hcd.c @@ -2804,9 +2804,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, /* Set device flags indicating whether the HCD supports DMA */ if (hsotg->core_params->dma_enable > 0) { - if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(31)) < 0) - dev_warn(hsotg->dev, - "can't enable workaround for >2GB RAM\n"); + if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) + dev_warn(hsotg->dev, "can't set DMA mask\n"); if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(31)) < 0) dev_warn(hsotg->dev, "can't enable workaround for >2GB RAM\n"); From 76554b87c85c0ac5ba56797dda670bad6677f9f1 Mon Sep 17 00:00:00 2001 From: Bob Liu Date: Mon, 27 May 2013 11:15:40 +0800 Subject: [PATCH 215/429] drivers: staging: zcache: fix compile error Fix below compile error: drivers/built-in.o: In function `zcache_pampd_free': >> zcache-main.c:(.text+0xb1c8a): undefined reference to `ramster_pampd_free' >> zcache-main.c:(.text+0xb1cbc): undefined reference to `ramster_count_foreign_pages' drivers/built-in.o: In function `zcache_pampd_get_data_and_free': >> zcache-main.c:(.text+0xb1f05): undefined reference to `ramster_count_foreign_pages' drivers/built-in.o: In function `zcache_cpu_notifier': >> zcache-main.c:(.text+0xb228d): undefined reference to `ramster_cpu_up' >> zcache-main.c:(.text+0xb2339): undefined reference to `ramster_cpu_down' drivers/built-in.o: In function `zcache_pampd_create': >> (.text+0xb26ce): undefined reference to `ramster_count_foreign_pages' drivers/built-in.o: In function `zcache_pampd_create': >> (.text+0xb27ef): undefined reference to `ramster_count_foreign_pages' drivers/built-in.o: In function `zcache_put_page': >> (.text+0xb299f): undefined reference to `ramster_do_preload_flnode' drivers/built-in.o: In function `zcache_flush_page': >> (.text+0xb2ea3): undefined reference to `ramster_do_preload_flnode' drivers/built-in.o: In function `zcache_flush_object': >> (.text+0xb307c): undefined reference to `ramster_do_preload_flnode' drivers/built-in.o: In function `zcache_init': >> zcache-main.c:(.text+0xb3629): undefined reference to `ramster_register_pamops' >> zcache-main.c:(.text+0xb3868): undefined reference to `ramster_init' >> drivers/built-in.o:(.rodata+0x15058): undefined reference to `ramster_foreign_eph_pages' >> drivers/built-in.o:(.rodata+0x15078): undefined reference to `ramster_foreign_pers_pages' Reported-by: Fengguang Wu Signed-off-by: Bob Liu Acked-by: Konrad Rzeszutek Wilk Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zcache/ramster.h | 4 ---- drivers/staging/zcache/ramster/debug.c | 2 ++ drivers/staging/zcache/ramster/ramster.c | 6 ++++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/staging/zcache/ramster.h b/drivers/staging/zcache/ramster.h index e1f91d5a0f6a..a858666eae68 100644 --- a/drivers/staging/zcache/ramster.h +++ b/drivers/staging/zcache/ramster.h @@ -11,10 +11,6 @@ #ifndef _ZCACHE_RAMSTER_H_ #define _ZCACHE_RAMSTER_H_ -#ifdef CONFIG_RAMSTER_MODULE -#define CONFIG_RAMSTER -#endif - #ifdef CONFIG_RAMSTER #include "ramster/ramster.h" #else diff --git a/drivers/staging/zcache/ramster/debug.c b/drivers/staging/zcache/ramster/debug.c index 327e4f0d98e1..5b26ee977c2f 100644 --- a/drivers/staging/zcache/ramster/debug.c +++ b/drivers/staging/zcache/ramster/debug.c @@ -1,6 +1,8 @@ #include #include "debug.h" +ssize_t ramster_foreign_eph_pages; +ssize_t ramster_foreign_pers_pages; #ifdef CONFIG_DEBUG_FS #include diff --git a/drivers/staging/zcache/ramster/ramster.c b/drivers/staging/zcache/ramster/ramster.c index b18b887db79f..a937ce1fa27a 100644 --- a/drivers/staging/zcache/ramster/ramster.c +++ b/drivers/staging/zcache/ramster/ramster.c @@ -66,8 +66,6 @@ static int ramster_remote_target_nodenum __read_mostly = -1; /* Used by this code. */ long ramster_flnodes; -ssize_t ramster_foreign_eph_pages; -ssize_t ramster_foreign_pers_pages; /* FIXME frontswap selfshrinking knobs in debugfs? */ static LIST_HEAD(ramster_rem_op_list); @@ -399,14 +397,18 @@ void ramster_count_foreign_pages(bool eph, int count) inc_ramster_foreign_eph_pages(); } else { dec_ramster_foreign_eph_pages(); +#ifdef CONFIG_RAMSTER_DEBUG WARN_ON_ONCE(ramster_foreign_eph_pages < 0); +#endif } } else { if (count > 0) { inc_ramster_foreign_pers_pages(); } else { dec_ramster_foreign_pers_pages(); +#ifdef CONFIG_RAMSTER_DEBUG WARN_ON_ONCE(ramster_foreign_pers_pages < 0); +#endif } } } From 077f5f1c23b3cf1134c031677497dfb6077e6bdd Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 29 May 2013 11:33:52 -0400 Subject: [PATCH 216/429] USB: EHCI: fix regression related to qh_refresh() This patch adds some code that inadvertently got left out of commit c1fdb68e3d73741630ca16695cf9176c233be7ed (USB: EHCI: changes related to qh_refresh()). The calls to qh_refresh() and qh_link_periodic() were taken out of qh_schedule(); therefore it is necessary to call these routines manually after calling qh_schedule(). Signed-off-by: Alan Stern Reported-and-tested-by: Oleksij Rempel Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sched.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index f3c1028a54fc..f80d0330d548 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -646,6 +646,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) /* reschedule QH iff another request is queued */ if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) { rc = qh_schedule(ehci, qh); + if (rc == 0) { + qh_refresh(ehci, qh); + qh_link_periodic(ehci, qh); + } /* An error here likely indicates handshake failure * or no space left in the schedule. Neither fault @@ -653,9 +657,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) * * FIXME kill the now-dysfunctional queued urbs */ - if (rc != 0) + else { ehci_err(ehci, "can't reschedule qh %p, err %d\n", qh, rc); + } } /* maybe turn off periodic schedule */ From 37448adfc7ce0d6d5892b87aa8d57edde4126f49 Mon Sep 17 00:00:00 2001 From: Lance Ortiz Date: Thu, 30 May 2013 08:25:12 -0600 Subject: [PATCH 217/429] aerdrv: Move cper_print_aer() call out of interrupt context The following warning was seen on 3.9 when a corrected PCIe error was being handled by the AER subsystem. WARNING: at .../drivers/pci/search.c:214 pci_get_dev_by_id+0x8a/0x90() This occurred because a call to pci_get_domain_bus_and_slot() was added to cper_print_pcie() to setup for the call to cper_print_aer(). The warning showed up because cper_print_pcie() is called in an interrupt context and pci_get* functions are not supposed to be called in that context. The solution is to move the cper_print_aer() call out of the interrupt context and into aer_recover_work_func() to avoid any warnings when calling pci_get* functions. Signed-off-by: Lance Ortiz Acked-by: Borislav Petkov Acked-by: Rafael J. Wysocki Signed-off-by: Tony Luck --- drivers/acpi/apei/cper.c | 18 ------------------ drivers/acpi/apei/ghes.c | 4 +++- drivers/pci/pcie/aer/aerdrv_core.c | 5 ++++- drivers/pci/pcie/aer/aerdrv_errprint.c | 4 ++-- include/linux/aer.h | 5 +++-- 5 files changed, 12 insertions(+), 24 deletions(-) diff --git a/drivers/acpi/apei/cper.c b/drivers/acpi/apei/cper.c index fefc2ca7cc3e..33dc6a004802 100644 --- a/drivers/acpi/apei/cper.c +++ b/drivers/acpi/apei/cper.c @@ -250,10 +250,6 @@ static const char *cper_pcie_port_type_strs[] = { static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie, const struct acpi_hest_generic_data *gdata) { -#ifdef CONFIG_ACPI_APEI_PCIEAER - struct pci_dev *dev; -#endif - if (pcie->validation_bits & CPER_PCIE_VALID_PORT_TYPE) printk("%s""port_type: %d, %s\n", pfx, pcie->port_type, pcie->port_type < ARRAY_SIZE(cper_pcie_port_type_strs) ? @@ -285,20 +281,6 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie, printk( "%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n", pfx, pcie->bridge.secondary_status, pcie->bridge.control); -#ifdef CONFIG_ACPI_APEI_PCIEAER - dev = pci_get_domain_bus_and_slot(pcie->device_id.segment, - pcie->device_id.bus, pcie->device_id.function); - if (!dev) { - pr_err("PCI AER Cannot get PCI device %04x:%02x:%02x.%d\n", - pcie->device_id.segment, pcie->device_id.bus, - pcie->device_id.slot, pcie->device_id.function); - return; - } - if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) - cper_print_aer(pfx, dev, gdata->error_severity, - (struct aer_capability_regs *) pcie->aer_info); - pci_dev_put(dev); -#endif } static const char *apei_estatus_section_flag_strs[] = { diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index d668a8ae602b..403baf4dffc1 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -454,7 +454,9 @@ static void ghes_do_proc(struct ghes *ghes, aer_severity = cper_severity_to_aer(sev); aer_recover_queue(pcie_err->device_id.segment, pcie_err->device_id.bus, - devfn, aer_severity); + devfn, aer_severity, + (struct aer_capability_regs *) + pcie_err->aer_info); } } diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 8ec8b4f48560..0f4554e48cc5 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -580,6 +580,7 @@ struct aer_recover_entry u8 devfn; u16 domain; int severity; + struct aer_capability_regs *regs; }; static DEFINE_KFIFO(aer_recover_ring, struct aer_recover_entry, @@ -593,7 +594,7 @@ static DEFINE_SPINLOCK(aer_recover_ring_lock); static DECLARE_WORK(aer_recover_work, aer_recover_work_func); void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, - int severity) + int severity, struct aer_capability_regs *aer_regs) { unsigned long flags; struct aer_recover_entry entry = { @@ -601,6 +602,7 @@ void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, .devfn = devfn, .domain = domain, .severity = severity, + .regs = aer_regs, }; spin_lock_irqsave(&aer_recover_ring_lock, flags); @@ -627,6 +629,7 @@ static void aer_recover_work_func(struct work_struct *work) PCI_SLOT(entry.devfn), PCI_FUNC(entry.devfn)); continue; } + cper_print_aer(pdev, entry.severity, entry.regs); do_recovery(pdev, entry.severity); pci_dev_put(pdev); } diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c index 5ab14251839d..2c7c9f5f592c 100644 --- a/drivers/pci/pcie/aer/aerdrv_errprint.c +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c @@ -220,7 +220,7 @@ int cper_severity_to_aer(int cper_severity) } EXPORT_SYMBOL_GPL(cper_severity_to_aer); -void cper_print_aer(const char *prefix, struct pci_dev *dev, int cper_severity, +void cper_print_aer(struct pci_dev *dev, int cper_severity, struct aer_capability_regs *aer) { int aer_severity, layer, agent, status_strs_size, tlp_header_valid = 0; @@ -244,7 +244,7 @@ void cper_print_aer(const char *prefix, struct pci_dev *dev, int cper_severity, agent = AER_GET_AGENT(aer_severity, status); dev_err(&dev->dev, "aer_status: 0x%08x, aer_mask: 0x%08x\n", status, mask); - cper_print_bits(prefix, status, status_strs, status_strs_size); + cper_print_bits("", status, status_strs, status_strs_size); dev_err(&dev->dev, "aer_layer=%s, aer_agent=%s\n", aer_error_layer[layer], aer_agent_string[agent]); if (aer_severity != AER_CORRECTABLE) diff --git a/include/linux/aer.h b/include/linux/aer.h index ec10e1b24c1c..737f90ab4b62 100644 --- a/include/linux/aer.h +++ b/include/linux/aer.h @@ -49,10 +49,11 @@ static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) } #endif -extern void cper_print_aer(const char *prefix, struct pci_dev *dev, +extern void cper_print_aer(struct pci_dev *dev, int cper_severity, struct aer_capability_regs *aer); extern int cper_severity_to_aer(int cper_severity); extern void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn, - int severity); + int severity, + struct aer_capability_regs *aer_regs); #endif //_AER_H_ From eb54d43707c69340581940e1fcaecb4d7d17b814 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Tue, 14 May 2013 14:37:56 -0400 Subject: [PATCH 218/429] NFS: Fix security flavor negotiation with legacy binary mounts Darrick J. Wong reports: > I have a kvm-based testing setup that netboots VMs over NFS, the > client end of which seems to have broken somehow in 3.10-rc1. The > server's exports file looks like this: > > /storage/mtr/x64 192.168.122.0/24(ro,sync,no_root_squash,no_subtree_check) > > On the client end (inside the VM), the initrd runs the following > command to try to mount the rootfs over NFS: > > # mount -o nolock -o ro -o retrans=10 192.168.122.1:/storage/mtr/x64/ /root > > (Note: This is the busybox mount command.) > > The mount fails with -EINVAL. Commit 4580a92d44 "NFS: Use server-recommended security flavor by default (NFSv3)" introduced a behavior regression for NFS mounts done via a legacy binary mount(2) call. Ensure that a default security flavor is specified for legacy binary mount requests, since they do not invoke nfs_select_flavor() in the kernel. Busybox uses klibc's nfsmount command, which performs NFS mounts using the legacy binary mount data format. /sbin/mount.nfs is not affected by this regression. Reported-by: Darrick J. Wong Signed-off-by: Chuck Lever Tested-by: Darrick J. Wong Acked-by: Weston Andros Adamson Signed-off-by: Trond Myklebust --- fs/nfs/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index a366107a7331..2d7525fbcf25 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1942,6 +1942,7 @@ static int nfs23_validate_mount_data(void *options, args->namlen = data->namlen; args->bsize = data->bsize; + args->auth_flavors[0] = RPC_AUTH_UNIX; if (data->flags & NFS_MOUNT_SECFLAVOUR) args->auth_flavors[0] = data->pseudoflavor; if (!args->nfs_server.hostname) @@ -2637,6 +2638,7 @@ static int nfs4_validate_mount_data(void *options, goto out_no_address; args->nfs_server.port = ntohs(((struct sockaddr_in *)sap)->sin_port); + args->auth_flavors[0] = RPC_AUTH_UNIX; if (data->auth_flavourlen) { if (data->auth_flavourlen > 1) goto out_inval_auth; From 5489e948dc0f41a249c109d74612bf5aceab8f38 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 30 May 2013 22:23:44 +0200 Subject: [PATCH 219/429] MAINTAINERS: Framebuffer Layer maintainers update Tomi and I will now take care of the Framebuffer Layer The git tree is now on kernel.org Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Tomi Valkeinen Cc: Olof Johansson Cc: Andrew Morton Cc: Arnd Bergmann Cc: Florian Tobias Schandinat Cc: linux-fbdev@vger.kernel.org Signed-off-by: Linus Torvalds --- MAINTAINERS | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index fd3a495a0005..7714c3c363c3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3322,11 +3322,12 @@ F: drivers/net/wan/dlci.c F: drivers/net/wan/sdla.c FRAMEBUFFER LAYER -M: Florian Tobias Schandinat +M: Jean-Christophe Plagniol-Villard +M: Tomi Valkeinen L: linux-fbdev@vger.kernel.org W: http://linux-fbdev.sourceforge.net/ Q: http://patchwork.kernel.org/project/linux-fbdev/list/ -T: git git://github.com/schandinat/linux-2.6.git fbdev-next +T: git git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev.git S: Maintained F: Documentation/fb/ F: Documentation/devicetree/bindings/fb/ From 08fb39051f5581df45ae2a20c6cf2d0c4cddf7c2 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:00 +1000 Subject: [PATCH 220/429] xfs: avoid nesting transactions in xfs_qm_scall_setqlim() Lockdep reports: ============================================= [ INFO: possible recursive locking detected ] 3.9.0+ #3 Not tainted --------------------------------------------- setquota/28368 is trying to acquire lock: (sb_internal){++++.?}, at: [] xfs_trans_alloc+0x26/0x50 but task is already holding lock: (sb_internal){++++.?}, at: [] xfs_trans_alloc+0x26/0x50 from xfs_qm_scall_setqlim()->xfs_dqread() when a dquot needs to be allocated. xfs_qm_scall_setqlim() is starting a transaction and then not passing it into xfs_qm_dqet() and so it starts it's own transaction when allocating the dquot. Splat! Fix this by not allocating the dquot in xfs_qm_scall_setqlim() inside the setqlim transaction. This requires getting the dquot first (and allocating it if necessary) then dropping and relocking the dquot before joining it to the setqlim transaction. Reported-by: Michael L. Semon Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit f648167f3ac79018c210112508c732ea9bf67c7b) --- fs/xfs/xfs_qm_syscalls.c | 46 +++++++++++++++++++++++----------------- 1 file changed, 26 insertions(+), 20 deletions(-) diff --git a/fs/xfs/xfs_qm_syscalls.c b/fs/xfs/xfs_qm_syscalls.c index c41190cad6e9..6cdf6ffc36a1 100644 --- a/fs/xfs/xfs_qm_syscalls.c +++ b/fs/xfs/xfs_qm_syscalls.c @@ -489,31 +489,36 @@ xfs_qm_scall_setqlim( if ((newlim->d_fieldmask & XFS_DQ_MASK) == 0) return 0; + /* + * We don't want to race with a quotaoff so take the quotaoff lock. + * We don't hold an inode lock, so there's nothing else to stop + * a quotaoff from happening. + */ + mutex_lock(&q->qi_quotaofflock); + + /* + * Get the dquot (locked) before we start, as we need to do a + * transaction to allocate it if it doesn't exist. Once we have the + * dquot, unlock it so we can start the next transaction safely. We hold + * a reference to the dquot, so it's safe to do this unlock/lock without + * it being reclaimed in the mean time. + */ + error = xfs_qm_dqget(mp, NULL, id, type, XFS_QMOPT_DQALLOC, &dqp); + if (error) { + ASSERT(error != ENOENT); + goto out_unlock; + } + xfs_dqunlock(dqp); + tp = xfs_trans_alloc(mp, XFS_TRANS_QM_SETQLIM); error = xfs_trans_reserve(tp, 0, XFS_QM_SETQLIM_LOG_RES(mp), 0, 0, XFS_DEFAULT_LOG_COUNT); if (error) { xfs_trans_cancel(tp, 0); - return (error); + goto out_rele; } - /* - * We don't want to race with a quotaoff so take the quotaoff lock. - * (We don't hold an inode lock, so there's nothing else to stop - * a quotaoff from happening). (XXXThis doesn't currently happen - * because we take the vfslock before calling xfs_qm_sysent). - */ - mutex_lock(&q->qi_quotaofflock); - - /* - * Get the dquot (locked), and join it to the transaction. - * Allocate the dquot if this doesn't exist. - */ - if ((error = xfs_qm_dqget(mp, NULL, id, type, XFS_QMOPT_DQALLOC, &dqp))) { - xfs_trans_cancel(tp, XFS_TRANS_ABORT); - ASSERT(error != ENOENT); - goto out_unlock; - } + xfs_dqlock(dqp); xfs_trans_dqjoin(tp, dqp); ddq = &dqp->q_core; @@ -621,9 +626,10 @@ xfs_qm_scall_setqlim( xfs_trans_log_dquot(tp, dqp); error = xfs_trans_commit(tp, 0); - xfs_qm_dqrele(dqp); - out_unlock: +out_rele: + xfs_qm_dqrele(dqp); +out_unlock: mutex_unlock(&q->qi_quotaofflock); return error; } From 2962f5a5dcc56f69cbf62121a7be67cc15d6940b Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:25 +1000 Subject: [PATCH 221/429] xfs: kill suid/sgid through the truncate path. XFS has failed to kill suid/sgid bits correctly when truncating files of non-zero size since commit c4ed4243 ("xfs: split xfs_setattr") introduced in the 3.1 kernel. Fix it. Fix it. cc: stable kernel Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 56c19e89b38618390addfc743d822f99519055c6) --- fs/xfs/xfs_iops.c | 47 ++++++++++++++++++++++++++++++++--------------- 1 file changed, 32 insertions(+), 15 deletions(-) diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c index d82efaa2ac73..ca9ecaa81112 100644 --- a/fs/xfs/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -455,6 +455,28 @@ xfs_vn_getattr( return 0; } +static void +xfs_setattr_mode( + struct xfs_trans *tp, + struct xfs_inode *ip, + struct iattr *iattr) +{ + struct inode *inode = VFS_I(ip); + umode_t mode = iattr->ia_mode; + + ASSERT(tp); + ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL)); + + if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID)) + mode &= ~S_ISGID; + + ip->i_d.di_mode &= S_IFMT; + ip->i_d.di_mode |= mode & ~S_IFMT; + + inode->i_mode &= S_IFMT; + inode->i_mode |= mode & ~S_IFMT; +} + int xfs_setattr_nonsize( struct xfs_inode *ip, @@ -606,18 +628,8 @@ xfs_setattr_nonsize( /* * Change file access modes. */ - if (mask & ATTR_MODE) { - umode_t mode = iattr->ia_mode; - - if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID)) - mode &= ~S_ISGID; - - ip->i_d.di_mode &= S_IFMT; - ip->i_d.di_mode |= mode & ~S_IFMT; - - inode->i_mode &= S_IFMT; - inode->i_mode |= mode & ~S_IFMT; - } + if (mask & ATTR_MODE) + xfs_setattr_mode(tp, ip, iattr); /* * Change file access or modified times. @@ -714,9 +726,8 @@ xfs_setattr_size( return XFS_ERROR(error); ASSERT(S_ISREG(ip->i_d.di_mode)); - ASSERT((mask & (ATTR_MODE|ATTR_UID|ATTR_GID|ATTR_ATIME|ATTR_ATIME_SET| - ATTR_MTIME_SET|ATTR_KILL_SUID|ATTR_KILL_SGID| - ATTR_KILL_PRIV|ATTR_TIMES_SET)) == 0); + ASSERT((mask & (ATTR_UID|ATTR_GID|ATTR_ATIME|ATTR_ATIME_SET| + ATTR_MTIME_SET|ATTR_KILL_PRIV|ATTR_TIMES_SET)) == 0); if (!(flags & XFS_ATTR_NOLOCK)) { lock_flags |= XFS_IOLOCK_EXCL; @@ -860,6 +871,12 @@ xfs_setattr_size( xfs_inode_clear_eofblocks_tag(ip); } + /* + * Change file access modes. + */ + if (mask & ATTR_MODE) + xfs_setattr_mode(tp, ip, iattr); + if (mask & ATTR_CTIME) { inode->i_ctime = iattr->ia_ctime; ip->i_d.di_ctime.t_sec = iattr->ia_ctime.tv_sec; From 7d2ffe80aa000a149246b3745968634192eb5358 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:23 +1000 Subject: [PATCH 222/429] xfs: fix split buffer vector log recovery support A long time ago in a galaxy far away.... .. the was a commit made to fix some ilinux specific "fragmented buffer" log recovery problem: http://oss.sgi.com/cgi-bin/gitweb.cgi?p=archive/xfs-import.git;a=commitdiff;h=b29c0bece51da72fb3ff3b61391a391ea54e1603 That problem occurred when a contiguous dirty region of a buffer was split across across two pages of an unmapped buffer. It's been a long time since that has been done in XFS, and the changes to log the entire inode buffers for CRC enabled filesystems has re-introduced that corner case. And, of course, it turns out that the above commit didn't actually fix anything - it just ensured that log recovery is guaranteed to fail when this situation occurs. And now for the gory details. xfstest xfs/085 is failing with this assert: XFS (vdb): bad number of regions (0) in inode log format XFS: Assertion failed: 0, file: fs/xfs/xfs_log_recover.c, line: 1583 Largely undocumented factoid #1: Log recovery depends on all log buffer format items starting with this format: struct foo_log_format { __uint16_t type; __uint16_t size; .... As recoery uses the size field and assumptions about 32 bit alignment in decoding format items. So don't pay much attention to the fact log recovery thinks that it decoding an inode log format item - it just uses them to determine what the size of the item is. But why would it see a log format item with a zero size? Well, luckily enough xfs_logprint uses the same code and gives the same error, so with a bit of gdb magic, it turns out that it isn't a log format that is being decoded. What logprint tells us is this: Oper (130): tid: a0375e1a len: 28 clientid: TRANS flags: none BUF: #regs: 2 start blkno: 144 (0x90) len: 16 bmap size: 2 flags: 0x4000 Oper (131): tid: a0375e1a len: 4096 clientid: TRANS flags: none BUF DATA ---------------------------------------------------------------------------- Oper (132): tid: a0375e1a len: 4096 clientid: TRANS flags: none xfs_logprint: unknown log operation type (4e49) ********************************************************************** * ERROR: data block=2 * ********************************************************************** That we've got a buffer format item (oper 130) that has two regions; the format item itself and one dirty region. The subsequent region after the buffer format item and it's data is them what we are tripping over, and the first bytes of it at an inode magic number. Not a log opheader like there is supposed to be. That means there's a problem with the buffer format item. It's dirty data region is 4096 bytes, and it contains - you guessed it - initialised inodes. But inode buffers are 8k, not 4k, and we log them in their entirety. So something is wrong here. The buffer format item contains: (gdb) p /x *(struct xfs_buf_log_format *)in_f $22 = {blf_type = 0x123c, blf_size = 0x2, blf_flags = 0x4000, blf_len = 0x10, blf_blkno = 0x90, blf_map_size = 0x2, blf_data_map = {0xffffffff, 0xffffffff, .... }} Two regions, and a signle dirty contiguous region of 64 bits. 64 * 128 = 8k, so this should be followed by a single 8k region of data. And the blf_flags tell us that the type of buffer is a XFS_BLFT_DINO_BUF. It contains inodes. And because it doesn't have the XFS_BLF_INODE_BUF flag set, that means it's an inode allocation buffer. So, it should be followed by 8k of inode data. But we know that the next region has a header of: (gdb) p /x *ohead $25 = {oh_tid = 0x1a5e37a0, oh_len = 0x100000, oh_clientid = 0x69, oh_flags = 0x0, oh_res2 = 0x0} and so be32_to_cpu(oh_len) = 0x1000 = 4096 bytes. It's simply not long enough to hold all the logged data. There must be another region. There is - there's a following opheader for another 4k of data that contains the other half of the inode cluster data - the one we assert fail on because it's not a log format header. So why is the second part of the data not being accounted to the correct buffer log format structure? It took a little more work with gdb to work out that the buffer log format structure was both expecting it to be there but hadn't accounted for it. It was at that point I went to the kernel code, as clearly this wasn't a bug in xfs_logprint and the kernel was writing bad stuff to the log. First port of call was the buffer item formatting code, and the discontiguous memory/contiguous dirty region handling code immediately stood out. I've wondered for a long time why the code had this comment in it: vecp->i_addr = xfs_buf_offset(bp, buffer_offset); vecp->i_len = nbits * XFS_BLF_CHUNK; vecp->i_type = XLOG_REG_TYPE_BCHUNK; /* * You would think we need to bump the nvecs here too, but we do not * this number is used by recovery, and it gets confused by the boundary * split here * nvecs++; */ vecp++; And it didn't account for the extra vector pointer. The case being handled here is that a contiguous dirty region lies across a boundary that cannot be memcpy()d across, and so has to be split into two separate operations for xlog_write() to perform. What this code assumes is that what is written to the log is two consecutive blocks of data that are accounted in the buf log format item as the same contiguous dirty region and so will get decoded as such by the log recovery code. The thing is, xlog_write() knows nothing about this, and so just does it's normal thing of adding an opheader for each vector. That means the 8k region gets written to the log as two separate regions of 4k each, but because nvecs has not been incremented, the buf log format item accounts for only one of them. Hence when we come to log recovery, we process the first 4k region and then expect to come across a new item that starts with a log format structure of some kind that tells us whenteh next data is going to be. Instead, we hit raw buffer data and things go bad real quick. So, the commit from 2002 that commented out nvecs++ is just plain wrong. It breaks log recovery completely, and it would seem the only reason this hasn't been since then is that we don't log large contigous regions of multi-page unmapped buffers very often. Never would be a closer estimate, at least until the CRC code came along.... So, lets fix that by restoring the nvecs accounting for the extra region when we hit this case..... .... and there's the problemin log recovery it is apparently working around: XFS: Assertion failed: i == item->ri_total, file: fs/xfs/xfs_log_recover.c, line: 2135 Yup, xlog_recover_do_reg_buffer() doesn't handle contigous dirty regions being broken up into multiple regions by the log formatting code. That's an easy fix, though - if the number of contiguous dirty bits exceeds the length of the region being copied out of the log, only account for the number of dirty bits that region covers, and then loop again and copy more from the next region. It's a 2 line fix. Now xfstests xfs/085 passes, we have one less piece of mystery code, and one more important piece of knowledge about how to structure new log format items.. Signed-off-by: Dave Chinner Reviewed-by: Mark Tinguely Signed-off-by: Ben Myers (cherry picked from commit 709da6a61aaf12181a8eea8443919ae5fc1b731d) --- fs/xfs/xfs_buf_item.c | 7 +------ fs/xfs/xfs_log_recover.c | 11 +++++++++++ 2 files changed, 12 insertions(+), 6 deletions(-) diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c index cf263476d6b4..4ec431777048 100644 --- a/fs/xfs/xfs_buf_item.c +++ b/fs/xfs/xfs_buf_item.c @@ -262,12 +262,7 @@ xfs_buf_item_format_segment( vecp->i_addr = xfs_buf_offset(bp, buffer_offset); vecp->i_len = nbits * XFS_BLF_CHUNK; vecp->i_type = XLOG_REG_TYPE_BCHUNK; -/* - * You would think we need to bump the nvecs here too, but we do not - * this number is used by recovery, and it gets confused by the boundary - * split here - * nvecs++; - */ + nvecs++; vecp++; first_bit = next_bit; last_bit = next_bit; diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 93f03ec17eec..d9e4d3c3991a 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -2096,6 +2096,17 @@ xlog_recover_do_reg_buffer( ASSERT(BBTOB(bp->b_io_length) >= ((uint)bit << XFS_BLF_SHIFT) + (nbits << XFS_BLF_SHIFT)); + /* + * The dirty regions logged in the buffer, even though + * contiguous, may span multiple chunks. This is because the + * dirty region may span a physical page boundary in a buffer + * and hence be split into two separate vectors for writing into + * the log. Hence we need to trim nbits back to the length of + * the current region being copied out of the log. + */ + if (item->ri_buf[i].i_len < (nbits << XFS_BLF_SHIFT)) + nbits = item->ri_buf[i].i_len >> XFS_BLF_SHIFT; + /* * Do a sanity check if this is a dquot buffer. Just checking * the first dquot in the buffer should do. XXXThis is From 1de09d1ae48152e56399aba0bfd984fb0ddae6b0 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:20 +1000 Subject: [PATCH 223/429] xfs: fix incorrect remote symlink block count When CRCs are enabled, the number of blocks needed to hold a remote symlink on a 1k block size filesystem may be 2 instead of 1. The transaction reservation for the allocated blocks was not taking this into account and only allocating one block. Hence when trying to read or invalidate such symlinks, we are mapping a hole where there should be a block and things go bad at that point. Fix the reservation to use the correct block count, clean up the block count calculation similar to the remote attribute calculation, and add a debug guard to detect when we don't write the entire symlink to disk. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 321a95839e65db3759a07a3655184b0283af90fe) --- fs/xfs/xfs_symlink.c | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) diff --git a/fs/xfs/xfs_symlink.c b/fs/xfs/xfs_symlink.c index 5f234389327c..195a403e1522 100644 --- a/fs/xfs/xfs_symlink.c +++ b/fs/xfs/xfs_symlink.c @@ -56,16 +56,9 @@ xfs_symlink_blocks( struct xfs_mount *mp, int pathlen) { - int fsblocks = 0; - int len = pathlen; + int buflen = XFS_SYMLINK_BUF_SPACE(mp, mp->m_sb.sb_blocksize); - do { - fsblocks++; - len -= XFS_SYMLINK_BUF_SPACE(mp, mp->m_sb.sb_blocksize); - } while (len > 0); - - ASSERT(fsblocks <= XFS_SYMLINK_MAPS); - return fsblocks; + return (pathlen + buflen - 1) / buflen; } static int @@ -405,7 +398,7 @@ xfs_symlink( if (pathlen <= XFS_LITINO(mp, dp->i_d.di_version)) fs_blocks = 0; else - fs_blocks = XFS_B_TO_FSB(mp, pathlen); + fs_blocks = xfs_symlink_blocks(mp, pathlen); resblks = XFS_SYMLINK_SPACE_RES(mp, link_name->len, fs_blocks); error = xfs_trans_reserve(tp, resblks, XFS_SYMLINK_LOG_RES(mp), 0, XFS_TRANS_PERM_LOG_RES, XFS_SYMLINK_LOG_COUNT); @@ -512,7 +505,7 @@ xfs_symlink( cur_chunk = target_path; offset = 0; for (n = 0; n < nmaps; n++) { - char *buf; + char *buf; d = XFS_FSB_TO_DADDR(mp, mval[n].br_startblock); byte_cnt = XFS_FSB_TO_B(mp, mval[n].br_blockcount); @@ -525,9 +518,7 @@ xfs_symlink( bp->b_ops = &xfs_symlink_buf_ops; byte_cnt = XFS_SYMLINK_BUF_SPACE(mp, byte_cnt); - if (pathlen < byte_cnt) { - byte_cnt = pathlen; - } + byte_cnt = min(byte_cnt, pathlen); buf = bp->b_addr; buf += xfs_symlink_hdr_set(mp, ip->i_ino, offset, @@ -542,6 +533,7 @@ xfs_symlink( xfs_trans_log_buf(tp, bp, 0, (buf + byte_cnt - 1) - (char *)bp->b_addr); } + ASSERT(pathlen == 0); } /* From e7927e879d12d27aa06b9bbed57cc32dcd7d17fd Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:26 +1000 Subject: [PATCH 224/429] xfs: add fsgeom flag for v5 superblock support. Currently userspace has no way of determining that a filesystem is CRC enabled. Add a flag to the XFS_IOC_FSGEOMETRY ioctl output to indicate that the filesystem has v5 superblock support enabled. This will allow xfs_info to correctly report the state of the filesystem. Signed-off-by: Dave Chinner Reviewed-by: Eric Sandeen Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 74137fff067961c9aca1e14d073805c3de8549bd) --- fs/xfs/xfs_fs.h | 1 + fs/xfs/xfs_fsops.c | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_fs.h b/fs/xfs/xfs_fs.h index 6dda3f949b04..d04695545397 100644 --- a/fs/xfs/xfs_fs.h +++ b/fs/xfs/xfs_fs.h @@ -236,6 +236,7 @@ typedef struct xfs_fsop_resblks { #define XFS_FSOP_GEOM_FLAGS_PROJID32 0x0800 /* 32-bit project IDs */ #define XFS_FSOP_GEOM_FLAGS_DIRV2CI 0x1000 /* ASCII only CI names */ #define XFS_FSOP_GEOM_FLAGS_LAZYSB 0x4000 /* lazy superblock counters */ +#define XFS_FSOP_GEOM_FLAGS_V5SB 0x8000 /* version 5 superblock */ /* diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c index 87595b211da1..3c3644ea825b 100644 --- a/fs/xfs/xfs_fsops.c +++ b/fs/xfs/xfs_fsops.c @@ -99,7 +99,9 @@ xfs_fs_geometry( (xfs_sb_version_hasattr2(&mp->m_sb) ? XFS_FSOP_GEOM_FLAGS_ATTR2 : 0) | (xfs_sb_version_hasprojid32bit(&mp->m_sb) ? - XFS_FSOP_GEOM_FLAGS_PROJID32 : 0); + XFS_FSOP_GEOM_FLAGS_PROJID32 : 0) | + (xfs_sb_version_hascrc(&mp->m_sb) ? + XFS_FSOP_GEOM_FLAGS_V5SB : 0); geo->logsectsize = xfs_sb_version_hassector(&mp->m_sb) ? mp->m_sb.sb_logsectsize : BBSIZE; geo->rtsectsize = mp->m_sb.sb_blocksize; From 7c9950fd2ac97431230544142d5e652e1b948372 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 27 May 2013 16:38:24 +1000 Subject: [PATCH 225/429] xfs: disable swap extents ioctl on CRC enabled filesystems Currently, swapping extents from one inode to another is a simple act of switching data and attribute forks from one inode to another. This, unfortunately in no longer so simple with CRC enabled filesystems as there is owner information embedded into the BMBT blocks that are swapped between inodes. Hence swapping the forks between inodes results in the inodes having mapping blocks that point to the wrong owner and hence are considered corrupt. To fix this we need an extent tree block or record based swap algorithm so that the BMBT block owner information can be updated atomically in the swap transaction. This is a significant piece of new work, so for the moment simply don't allow swap extent operations to succeed on CRC enabled filesystems. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit 02f75405a75eadfb072609f6bf839e027de6a29a) --- fs/xfs/xfs_dfrag.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c index f852b082a084..c407e1ccff43 100644 --- a/fs/xfs/xfs_dfrag.c +++ b/fs/xfs/xfs_dfrag.c @@ -219,6 +219,14 @@ xfs_swap_extents( int taforkblks = 0; __uint64_t tmp; + /* + * We have no way of updating owner information in the BMBT blocks for + * each inode on CRC enabled filesystems, so to avoid corrupting the + * this metadata we simply don't allow extent swaps to occur. + */ + if (xfs_sb_version_hascrc(&mp->m_sb)) + return XFS_ERROR(EINVAL); + tempifp = kmem_alloc(sizeof(xfs_ifork_t), KM_MAYFAIL); if (!tempifp) { error = XFS_ERROR(ENOMEM); From e400d27d1690d609f203f2d7d8efebc98cbc3089 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 28 May 2013 18:37:17 +1000 Subject: [PATCH 226/429] xfs: fix dir3 freespace block corruption When the directory freespace index grows to a second block (2017 4k data blocks in the directory), the initialisation of the second new block header goes wrong. The write verifier fires a corruption error indicating that the block number in the header is zero. This was being tripped by xfs/110. The problem is that the initialisation of the new block is done just fine in xfs_dir3_free_get_buf(), but the caller then users a dirv2 structure to zero on-disk header fields that xfs_dir3_free_get_buf() has already zeroed. These lined up with the block number in the dir v3 header format. While looking at this, I noticed that the struct xfs_dir3_free_hdr() had 4 bytes of padding in it that wasn't defined as padding or being zeroed by the initialisation. Add a pad field declaration and fully zero the on disk and in-core headers in xfs_dir3_free_get_buf() so that this is never an issue in the future. Note that this doesn't change the on-disk layout, just makes the 32 bits of padding in the layout explicit. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 5ae6e6a401957698f2bd8c9f4a86d86d02199fea) --- fs/xfs/xfs_dir2_format.h | 1 + fs/xfs/xfs_dir2_node.c | 13 ++++++------- 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/xfs/xfs_dir2_format.h b/fs/xfs/xfs_dir2_format.h index a3b1bd841a80..995f1f505a52 100644 --- a/fs/xfs/xfs_dir2_format.h +++ b/fs/xfs/xfs_dir2_format.h @@ -715,6 +715,7 @@ struct xfs_dir3_free_hdr { __be32 firstdb; /* db of first entry */ __be32 nvalid; /* count of valid entries */ __be32 nused; /* count of used entries */ + __be32 pad; /* 64 bit alignment. */ }; struct xfs_dir3_free { diff --git a/fs/xfs/xfs_dir2_node.c b/fs/xfs/xfs_dir2_node.c index 5246de4912d4..2226a00acd15 100644 --- a/fs/xfs/xfs_dir2_node.c +++ b/fs/xfs/xfs_dir2_node.c @@ -263,18 +263,19 @@ xfs_dir3_free_get_buf( * Initialize the new block to be empty, and remember * its first slot as our empty slot. */ - hdr.magic = XFS_DIR2_FREE_MAGIC; - hdr.firstdb = 0; - hdr.nused = 0; - hdr.nvalid = 0; + memset(bp->b_addr, 0, sizeof(struct xfs_dir3_free_hdr)); + memset(&hdr, 0, sizeof(hdr)); + if (xfs_sb_version_hascrc(&mp->m_sb)) { struct xfs_dir3_free_hdr *hdr3 = bp->b_addr; hdr.magic = XFS_DIR3_FREE_MAGIC; + hdr3->hdr.blkno = cpu_to_be64(bp->b_bn); hdr3->hdr.owner = cpu_to_be64(dp->i_ino); uuid_copy(&hdr3->hdr.uuid, &mp->m_sb.sb_uuid); - } + } else + hdr.magic = XFS_DIR2_FREE_MAGIC; xfs_dir3_free_hdr_to_disk(bp->b_addr, &hdr); *bpp = bp; return 0; @@ -1921,8 +1922,6 @@ xfs_dir2_node_addname_int( */ freehdr.firstdb = (fbno - XFS_DIR2_FREE_FIRSTDB(mp)) * xfs_dir3_free_max_bests(mp); - free->hdr.nvalid = 0; - free->hdr.nused = 0; } else { free = fbp->b_addr; bests = xfs_dir3_free_bests_p(mp, free); From 9531e2de6b7f04bd734b4bbc1e16a6955121615a Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:01 +1000 Subject: [PATCH 227/429] xfs: remote attribute allocation may be contiguous When CRCs are enabled, there may be multiple allocations made if the headers cause a length overflow. This, however, does not mean that the number of headers required increases, as the second and subsequent extents may be contiguous with the previous extent. Hence when we map the extents to write the attribute data, we may end up with less extents than allocations made. Hence the assertion that we consume the number of headers we calculated in the allocation loop is incorrect and needs to be removed. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 90253cf142469a40f89f989904abf0a1e500e1a6) --- fs/xfs/xfs_attr_remote.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index dee84466dcc9..aad95b08e76b 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -359,6 +359,11 @@ xfs_attr_rmtval_set( * into requiring more blocks. e.g. for 512 byte blocks, we'll * spill for another block every 9 headers we require in this * loop. + * + * Note that this can result in contiguous allocation of blocks, + * so we don't use all the space we allocate for headers as we + * have one less header for each contiguous allocation that + * occurs in the map/write loop below. */ if (crcs && blkcnt == 0) { int total_len; @@ -439,7 +444,6 @@ xfs_attr_rmtval_set( lblkno += map.br_blockcount; } ASSERT(valuelen == 0); - ASSERT(hdrcnt == 0); return 0; } From 551b382f5368900d6d82983505cb52553c946a2b Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:02 +1000 Subject: [PATCH 228/429] xfs: remote attribute read too short Reading a maximally size remote attribute fails when CRCs are enabled with this verification error: XFS (vdb): remote attribute header does not match required off/len/owner) There are two reasons for this, the first being that the length of the buffer being read is determined from the args->rmtblkcnt which doesn't take into account CRC headers. Hence the mapped length ends up being too short and so we need to calculate it directly from the value length. The second is that the byte count of valid data within a buffer is capped by the length of the data and so doesn't take into account that the buffer might be longer due to headers. Hence we need to calculate the data space in the buffer first before calculating the actual byte count of data. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 913e96bc292e1bb248854686c79d6545ef3ee720) --- fs/xfs/xfs_attr_remote.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index aad95b08e76b..bcdc07c4e8f4 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -52,9 +52,11 @@ xfs_attr3_rmt_blocks( struct xfs_mount *mp, int attrlen) { - int buflen = XFS_ATTR3_RMT_BUF_SPACE(mp, - mp->m_sb.sb_blocksize); - return (attrlen + buflen - 1) / buflen; + if (xfs_sb_version_hascrc(&mp->m_sb)) { + int buflen = XFS_ATTR3_RMT_BUF_SPACE(mp, mp->m_sb.sb_blocksize); + return (attrlen + buflen - 1) / buflen; + } + return XFS_B_TO_FSB(mp, attrlen); } static bool @@ -206,8 +208,9 @@ xfs_attr_rmtval_get( while (valuelen > 0) { nmap = ATTR_RMTVALUE_MAPSIZE; + blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno, - args->rmtblkcnt, map, &nmap, + blkcnt, map, &nmap, XFS_BMAPI_ATTRFORK); if (error) return error; @@ -227,8 +230,8 @@ xfs_attr_rmtval_get( if (error) return error; - byte_cnt = min_t(int, valuelen, BBTOB(bp->b_length)); - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, byte_cnt); + byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); + byte_cnt = min_t(int, valuelen, byte_cnt); src = bp->b_addr; if (xfs_sb_version_hascrc(&mp->m_sb)) { From 26f714450c3907ce07c41a0bd1bea40368e0b4da Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:03 +1000 Subject: [PATCH 229/429] xfs: remote attribute tail zeroing does too much When an attribute data does not fill then entire remote block, we zero the remaining part of the buffer. This, however, needs to take into account that the buffer has a header, and so the offset where zeroing starts and the length of zeroing need to take this into account. Otherwise we end up with zeros over the end of the attribute value when CRCs are enabled. While there, make sure we only ask to map an extent that covers the remaining range of the attribute, rather than asking every time for the full length of remote data. If the remote attribute blocks are contiguous with other parts of the attribute tree, it will map those blocks as well and we can potentially zero them incorrectly. We can also get buffer size mistmatches when trying to read or remove the remote attribute, and this can lead to not finding the correct buffer when looking it up in cache. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 4af3644c9a53eb2f1ecf69cc53576561b64be4c6) --- fs/xfs/xfs_attr_remote.c | 39 +++++++++++++++++++-------------------- 1 file changed, 19 insertions(+), 20 deletions(-) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index bcdc07c4e8f4..e207bf0004b6 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -296,10 +296,7 @@ xfs_attr_rmtval_set( * and we may not need that many, so we have to handle this when * allocating the blocks below. */ - if (!crcs) - blkcnt = XFS_B_TO_FSB(mp, args->valuelen); - else - blkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); + blkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); error = xfs_bmap_first_unused(args->trans, args->dp, blkcnt, &lfileoff, XFS_ATTR_FORK); @@ -394,8 +391,11 @@ xfs_attr_rmtval_set( */ lblkno = args->rmtblkno; valuelen = args->valuelen; + blkcnt = args->rmtblkcnt; while (valuelen > 0) { int byte_cnt; + int hdr_size; + int dblkcnt; char *buf; /* @@ -404,7 +404,7 @@ xfs_attr_rmtval_set( xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi_read(dp, (xfs_fileoff_t)lblkno, - args->rmtblkcnt, &map, &nmap, + blkcnt, &map, &nmap, XFS_BMAPI_ATTRFORK); if (error) return(error); @@ -413,26 +413,25 @@ xfs_attr_rmtval_set( (map.br_startblock != HOLESTARTBLOCK)); dblkno = XFS_FSB_TO_DADDR(mp, map.br_startblock), - blkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); + dblkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); - bp = xfs_buf_get(mp->m_ddev_targp, dblkno, blkcnt, 0); + bp = xfs_buf_get(mp->m_ddev_targp, dblkno, dblkcnt, 0); if (!bp) return ENOMEM; bp->b_ops = &xfs_attr3_rmt_buf_ops; - - byte_cnt = BBTOB(bp->b_length); - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, byte_cnt); - if (valuelen < byte_cnt) - byte_cnt = valuelen; - buf = bp->b_addr; - buf += xfs_attr3_rmt_hdr_set(mp, dp->i_ino, offset, - byte_cnt, bp); - memcpy(buf, src, byte_cnt); - if (byte_cnt < BBTOB(bp->b_length)) - xfs_buf_zero(bp, byte_cnt, - BBTOB(bp->b_length) - byte_cnt); + byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); + byte_cnt = min_t(int, valuelen, byte_cnt); + hdr_size = xfs_attr3_rmt_hdr_set(mp, dp->i_ino, offset, + byte_cnt, bp); + ASSERT(hdr_size + byte_cnt <= BBTOB(bp->b_length)); + + memcpy(buf + hdr_size, src, byte_cnt); + + if (byte_cnt + hdr_size < BBTOB(bp->b_length)) + xfs_buf_zero(bp, byte_cnt + hdr_size, + BBTOB(bp->b_length) - byte_cnt - hdr_size); error = xfs_bwrite(bp); /* GROT: NOTE: synchronous write */ xfs_buf_relse(bp); @@ -442,9 +441,9 @@ xfs_attr_rmtval_set( src += byte_cnt; valuelen -= byte_cnt; offset += byte_cnt; - hdrcnt--; lblkno += map.br_blockcount; + blkcnt -= map.br_blockcount; } ASSERT(valuelen == 0); return 0; From 58a72281555bf301f6dff24db2db205c87ef8db1 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:04 +1000 Subject: [PATCH 230/429] xfs: correctly map remote attr buffers during removal If we don't map the buffers correctly (same as for get/set operations) then the incore buffer lookup will fail. If a block number matches but a length is wrong, then debug kernels will ASSERT fail in _xfs_buf_find() due to the length mismatch. Ensure that we map the buffers correctly by basing the length of the buffer on the attribute data length rather than the remote block count. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 6863ef8449f1908c19f43db572e4474f24a1e9da) --- fs/xfs/xfs_attr_remote.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index e207bf0004b6..d8bcb2d742d1 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -468,19 +468,25 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) mp = args->dp->i_mount; /* - * Roll through the "value", invalidating the attribute value's - * blocks. + * Roll through the "value", invalidating the attribute value's blocks. + * Note that args->rmtblkcnt is the minimum number of data blocks we'll + * see for a CRC enabled remote attribute. Each extent will have a + * header, and so we may have more blocks than we realise here. If we + * fail to map the blocks correctly, we'll have problems with the buffer + * lookups. */ lblkno = args->rmtblkno; - valuelen = args->rmtblkcnt; + valuelen = args->valuelen; + blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); while (valuelen > 0) { + int dblkcnt; + /* * Try to remember where we decided to put the value. */ nmap = 1; error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno, - args->rmtblkcnt, &map, &nmap, - XFS_BMAPI_ATTRFORK); + blkcnt, &map, &nmap, XFS_BMAPI_ATTRFORK); if (error) return(error); ASSERT(nmap == 1); @@ -488,28 +494,31 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) (map.br_startblock != HOLESTARTBLOCK)); dblkno = XFS_FSB_TO_DADDR(mp, map.br_startblock), - blkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); + dblkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount); /* * If the "remote" value is in the cache, remove it. */ - bp = xfs_incore(mp->m_ddev_targp, dblkno, blkcnt, XBF_TRYLOCK); + bp = xfs_incore(mp->m_ddev_targp, dblkno, dblkcnt, XBF_TRYLOCK); if (bp) { xfs_buf_stale(bp); xfs_buf_relse(bp); bp = NULL; } - valuelen -= map.br_blockcount; + valuelen -= XFS_ATTR3_RMT_BUF_SPACE(mp, + XFS_FSB_TO_B(mp, map.br_blockcount)); lblkno += map.br_blockcount; + blkcnt -= map.br_blockcount; + blkcnt = max(blkcnt, xfs_attr3_rmt_blocks(mp, valuelen)); } /* * Keep de-allocating extents until the remote-value region is gone. */ + blkcnt = lblkno - args->rmtblkno; lblkno = args->rmtblkno; - blkcnt = args->rmtblkcnt; done = 0; while (!done) { xfs_bmap_init(args->flist, args->firstblock); From 9e80c76205b46b338cb56c336148f54b2326342f Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:05 +1000 Subject: [PATCH 231/429] xfs: fully initialise temp leaf in xfs_attr3_leaf_unbalance xfs_attr3_leaf_unbalance() uses a temporary buffer for recombining the entries in two leaves when the destination leaf requires compaction. The temporary buffer ends up being copied back over the original destination buffer, so the header in the temporary buffer needs to contain all the information that is in the destination buffer. To make sure the temporary buffer is fully initialised, once we've set up the temporary incore header appropriately, write is back to the temporary buffer before starting to move entries around. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 8517de2a81da830f5d90da66b4799f4040c76dc9) --- fs/xfs/xfs_attr_leaf.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 0bce1b348580..79ece72976ae 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -2181,14 +2181,24 @@ xfs_attr3_leaf_unbalance( struct xfs_attr_leafblock *tmp_leaf; struct xfs_attr3_icleaf_hdr tmphdr; - tmp_leaf = kmem_alloc(state->blocksize, KM_SLEEP); - memset(tmp_leaf, 0, state->blocksize); - memset(&tmphdr, 0, sizeof(tmphdr)); + tmp_leaf = kmem_zalloc(state->blocksize, KM_SLEEP); + /* + * Copy the header into the temp leaf so that all the stuff + * not in the incore header is present and gets copied back in + * once we've moved all the entries. + */ + memcpy(tmp_leaf, save_leaf, xfs_attr3_leaf_hdr_size(save_leaf)); + + memset(&tmphdr, 0, sizeof(tmphdr)); tmphdr.magic = savehdr.magic; tmphdr.forw = savehdr.forw; tmphdr.back = savehdr.back; tmphdr.firstused = state->blocksize; + + /* write the header to the temp buffer to initialise it */ + xfs_attr3_leaf_hdr_to_disk(tmp_leaf, &tmphdr); + if (xfs_attr3_leaf_order(save_blk->bp, &savehdr, drop_blk->bp, &drophdr)) { xfs_attr3_leaf_moveents(drop_leaf, &drophdr, 0, From 634fd5322a3e6ae632dcf5f20eebc0583ba50838 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:06 +1000 Subject: [PATCH 232/429] xfs: fully initialise temp leaf in xfs_attr3_leaf_compact xfs_attr3_leaf_compact() uses a temporary buffer for compacting the the entries in a leaf. It copies the the original buffer into the temporary buffer, then zeros the original buffer completely. It then copies the entries back into the original buffer. However, the original buffer has not been correctly initialised, and so the movement of the entries goes horribly wrong. Make sure the zeroed destination buffer is fully initialised, and once we've set up the destination incore header appropriately, write is back to the buffer before starting to move entries around. While debugging this, the _d/_s prefixes weren't sufficient to remind me what buffer was what, so rename then all _src/_dst. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit d4c712bcf26a25c2b67c90e44e0b74c7993b5334) --- fs/xfs/xfs_attr_leaf.c | 42 ++++++++++++++++++++++++++---------------- 1 file changed, 26 insertions(+), 16 deletions(-) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 79ece72976ae..5b03d15b707b 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -1445,11 +1445,12 @@ xfs_attr3_leaf_add_work( STATIC void xfs_attr3_leaf_compact( struct xfs_da_args *args, - struct xfs_attr3_icleaf_hdr *ichdr_d, + struct xfs_attr3_icleaf_hdr *ichdr_dst, struct xfs_buf *bp) { - xfs_attr_leafblock_t *leaf_s, *leaf_d; - struct xfs_attr3_icleaf_hdr ichdr_s; + struct xfs_attr_leafblock *leaf_src; + struct xfs_attr_leafblock *leaf_dst; + struct xfs_attr3_icleaf_hdr ichdr_src; struct xfs_trans *trans = args->trans; struct xfs_mount *mp = trans->t_mountp; char *tmpbuffer; @@ -1457,29 +1458,38 @@ xfs_attr3_leaf_compact( trace_xfs_attr_leaf_compact(args); tmpbuffer = kmem_alloc(XFS_LBSIZE(mp), KM_SLEEP); - ASSERT(tmpbuffer != NULL); memcpy(tmpbuffer, bp->b_addr, XFS_LBSIZE(mp)); memset(bp->b_addr, 0, XFS_LBSIZE(mp)); + leaf_src = (xfs_attr_leafblock_t *)tmpbuffer; + leaf_dst = bp->b_addr; /* - * Copy basic information + * Copy the on-disk header back into the destination buffer to ensure + * all the information in the header that is not part of the incore + * header structure is preserved. */ - leaf_s = (xfs_attr_leafblock_t *)tmpbuffer; - leaf_d = bp->b_addr; - ichdr_s = *ichdr_d; /* struct copy */ - ichdr_d->firstused = XFS_LBSIZE(mp); - ichdr_d->usedbytes = 0; - ichdr_d->count = 0; - ichdr_d->holes = 0; - ichdr_d->freemap[0].base = xfs_attr3_leaf_hdr_size(leaf_s); - ichdr_d->freemap[0].size = ichdr_d->firstused - ichdr_d->freemap[0].base; + memcpy(bp->b_addr, tmpbuffer, xfs_attr3_leaf_hdr_size(leaf_src)); + + /* Initialise the incore headers */ + ichdr_src = *ichdr_dst; /* struct copy */ + ichdr_dst->firstused = XFS_LBSIZE(mp); + ichdr_dst->usedbytes = 0; + ichdr_dst->count = 0; + ichdr_dst->holes = 0; + ichdr_dst->freemap[0].base = xfs_attr3_leaf_hdr_size(leaf_src); + ichdr_dst->freemap[0].size = ichdr_dst->firstused - + ichdr_dst->freemap[0].base; + + + /* write the header back to initialise the underlying buffer */ + xfs_attr3_leaf_hdr_to_disk(leaf_dst, ichdr_dst); /* * Copy all entry's in the same (sorted) order, * but allocate name/value pairs packed and in sequence. */ - xfs_attr3_leaf_moveents(leaf_s, &ichdr_s, 0, leaf_d, ichdr_d, 0, - ichdr_s.count, mp); + xfs_attr3_leaf_moveents(leaf_src, &ichdr_src, 0, leaf_dst, ichdr_dst, 0, + ichdr_src.count, mp); /* * this logs the entire buffer, but the caller must write the header * back to the buffer when it is finished modifying it. From 7bc0dc271e494e12be3afd3c6431e5216347c624 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Tue, 21 May 2013 18:02:08 +1000 Subject: [PATCH 233/429] xfs: rework remote attr CRCs Note: this changes the on-disk remote attribute format. I assert that this is OK to do as CRCs are marked experimental and the first kernel it is included in has not yet reached release yet. Further, the userspace utilities are still evolving and so anyone using this stuff right now is a developer or tester using volatile filesystems for testing this feature. Hence changing the format right now to save longer term pain is the right thing to do. The fundamental change is to move from a header per extent in the attribute to a header per filesytem block in the attribute. This means there are more header blocks and the parsing of the attribute data is slightly more complex, but it has the advantage that we always know the size of the attribute on disk based on the length of the data it contains. This is where the header-per-extent method has problems. We don't know the size of the attribute on disk without first knowing how many extents are used to hold it. And we can't tell from a mapping lookup, either, because remote attributes can be allocated contiguously with other attribute blocks and so there is no obvious way of determining the actual size of the atribute on disk short of walking and mapping buffers. The problem with this approach is that if we map a buffer incorrectly (e.g. we make the last buffer for the attribute data too long), we then get buffer cache lookup failure when we map it correctly. i.e. we get a size mismatch on lookup. This is not necessarily fatal, but it's a cache coherency problem that can lead to returning the wrong data to userspace or writing the wrong data to disk. And debug kernels will assert fail if this occurs. I found lots of niggly little problems trying to fix this issue on a 4k block size filesystem, finally getting it to pass with lots of fixes. The thing is, 1024 byte filesystems still failed, and it was getting really complex handling all the corner cases that were showing up. And there were clearly more that I hadn't found yet. It is complex, fragile code, and if we don't fix it now, it will be complex, fragile code forever more. Hence the simple fix is to add a header to each filesystem block. This gives us the same relationship between the attribute data length and the number of blocks on disk as we have without CRCs - it's a linear mapping and doesn't require us to guess anything. It is simple to implement, too - the remote block count calculated at lookup time can be used by the remote attribute set/get/remove code without modification for both CRC and non-CRC filesystems. The world becomes sane again. Because the copy-in and copy-out now need to iterate over each filesystem block, I moved them into helper functions so we separate the block mapping and buffer manupulations from the attribute data and CRC header manipulations. The code becomes much clearer as a result, and it is a lot easier to understand and debug. It also appears to be much more robust - once it worked on 4k block size filesystems, it has worked without failure on 1k block size filesystems, too. Signed-off-by: Dave Chinner Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit ad1858d77771172e08016890f0eb2faedec3ecee) --- fs/xfs/xfs_attr_leaf.c | 13 +- fs/xfs/xfs_attr_remote.c | 381 +++++++++++++++++++++++---------------- fs/xfs/xfs_attr_remote.h | 10 + fs/xfs/xfs_buf.c | 1 + 4 files changed, 247 insertions(+), 158 deletions(-) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index 5b03d15b707b..d788302e506a 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -1412,7 +1412,7 @@ xfs_attr3_leaf_add_work( name_rmt->valuelen = 0; name_rmt->valueblk = 0; args->rmtblkno = 1; - args->rmtblkcnt = XFS_B_TO_FSB(mp, args->valuelen); + args->rmtblkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); } xfs_trans_log_buf(args->trans, bp, XFS_DA_LOGRANGE(leaf, xfs_attr3_leaf_name(leaf, args->index), @@ -2354,8 +2354,9 @@ xfs_attr3_leaf_lookup_int( args->index = probe; args->valuelen = be32_to_cpu(name_rmt->valuelen); args->rmtblkno = be32_to_cpu(name_rmt->valueblk); - args->rmtblkcnt = XFS_B_TO_FSB(args->dp->i_mount, - args->valuelen); + args->rmtblkcnt = xfs_attr3_rmt_blocks( + args->dp->i_mount, + args->valuelen); return XFS_ERROR(EEXIST); } } @@ -2406,7 +2407,8 @@ xfs_attr3_leaf_getvalue( ASSERT(memcmp(args->name, name_rmt->name, args->namelen) == 0); valuelen = be32_to_cpu(name_rmt->valuelen); args->rmtblkno = be32_to_cpu(name_rmt->valueblk); - args->rmtblkcnt = XFS_B_TO_FSB(args->dp->i_mount, valuelen); + args->rmtblkcnt = xfs_attr3_rmt_blocks(args->dp->i_mount, + valuelen); if (args->flags & ATTR_KERNOVAL) { args->valuelen = valuelen; return 0; @@ -2732,7 +2734,8 @@ xfs_attr3_leaf_list_int( args.valuelen = valuelen; args.value = kmem_alloc(valuelen, KM_SLEEP | KM_NOFS); args.rmtblkno = be32_to_cpu(name_rmt->valueblk); - args.rmtblkcnt = XFS_B_TO_FSB(args.dp->i_mount, valuelen); + args.rmtblkcnt = xfs_attr3_rmt_blocks( + args.dp->i_mount, valuelen); retval = xfs_attr_rmtval_get(&args); if (retval) return retval; diff --git a/fs/xfs/xfs_attr_remote.c b/fs/xfs/xfs_attr_remote.c index d8bcb2d742d1..ef6b0c124528 100644 --- a/fs/xfs/xfs_attr_remote.c +++ b/fs/xfs/xfs_attr_remote.c @@ -47,7 +47,7 @@ * Each contiguous block has a header, so it is not just a simple attribute * length to FSB conversion. */ -static int +int xfs_attr3_rmt_blocks( struct xfs_mount *mp, int attrlen) @@ -59,12 +59,43 @@ xfs_attr3_rmt_blocks( return XFS_B_TO_FSB(mp, attrlen); } +/* + * Checking of the remote attribute header is split into two parts. The verifier + * does CRC, location and bounds checking, the unpacking function checks the + * attribute parameters and owner. + */ +static bool +xfs_attr3_rmt_hdr_ok( + struct xfs_mount *mp, + void *ptr, + xfs_ino_t ino, + uint32_t offset, + uint32_t size, + xfs_daddr_t bno) +{ + struct xfs_attr3_rmt_hdr *rmt = ptr; + + if (bno != be64_to_cpu(rmt->rm_blkno)) + return false; + if (offset != be32_to_cpu(rmt->rm_offset)) + return false; + if (size != be32_to_cpu(rmt->rm_bytes)) + return false; + if (ino != be64_to_cpu(rmt->rm_owner)) + return false; + + /* ok */ + return true; +} + static bool xfs_attr3_rmt_verify( - struct xfs_buf *bp) + struct xfs_mount *mp, + void *ptr, + int fsbsize, + xfs_daddr_t bno) { - struct xfs_mount *mp = bp->b_target->bt_mount; - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; + struct xfs_attr3_rmt_hdr *rmt = ptr; if (!xfs_sb_version_hascrc(&mp->m_sb)) return false; @@ -72,7 +103,9 @@ xfs_attr3_rmt_verify( return false; if (!uuid_equal(&rmt->rm_uuid, &mp->m_sb.sb_uuid)) return false; - if (bp->b_bn != be64_to_cpu(rmt->rm_blkno)) + if (be64_to_cpu(rmt->rm_blkno) != bno) + return false; + if (be32_to_cpu(rmt->rm_bytes) > fsbsize - sizeof(*rmt)) return false; if (be32_to_cpu(rmt->rm_offset) + be32_to_cpu(rmt->rm_bytes) >= XATTR_SIZE_MAX) @@ -88,17 +121,40 @@ xfs_attr3_rmt_read_verify( struct xfs_buf *bp) { struct xfs_mount *mp = bp->b_target->bt_mount; + char *ptr; + int len; + bool corrupt = false; + xfs_daddr_t bno; /* no verification of non-crc buffers */ if (!xfs_sb_version_hascrc(&mp->m_sb)) return; - if (!xfs_verify_cksum(bp->b_addr, BBTOB(bp->b_length), - XFS_ATTR3_RMT_CRC_OFF) || - !xfs_attr3_rmt_verify(bp)) { + ptr = bp->b_addr; + bno = bp->b_bn; + len = BBTOB(bp->b_length); + ASSERT(len >= XFS_LBSIZE(mp)); + + while (len > 0) { + if (!xfs_verify_cksum(ptr, XFS_LBSIZE(mp), + XFS_ATTR3_RMT_CRC_OFF)) { + corrupt = true; + break; + } + if (!xfs_attr3_rmt_verify(mp, ptr, XFS_LBSIZE(mp), bno)) { + corrupt = true; + break; + } + len -= XFS_LBSIZE(mp); + ptr += XFS_LBSIZE(mp); + bno += mp->m_bsize; + } + + if (corrupt) { XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, bp->b_addr); xfs_buf_ioerror(bp, EFSCORRUPTED); - } + } else + ASSERT(len == 0); } static void @@ -107,23 +163,39 @@ xfs_attr3_rmt_write_verify( { struct xfs_mount *mp = bp->b_target->bt_mount; struct xfs_buf_log_item *bip = bp->b_fspriv; + char *ptr; + int len; + xfs_daddr_t bno; /* no verification of non-crc buffers */ if (!xfs_sb_version_hascrc(&mp->m_sb)) return; - if (!xfs_attr3_rmt_verify(bp)) { - XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, bp->b_addr); - xfs_buf_ioerror(bp, EFSCORRUPTED); - return; - } + ptr = bp->b_addr; + bno = bp->b_bn; + len = BBTOB(bp->b_length); + ASSERT(len >= XFS_LBSIZE(mp)); - if (bip) { - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; - rmt->rm_lsn = cpu_to_be64(bip->bli_item.li_lsn); + while (len > 0) { + if (!xfs_attr3_rmt_verify(mp, ptr, XFS_LBSIZE(mp), bno)) { + XFS_CORRUPTION_ERROR(__func__, + XFS_ERRLEVEL_LOW, mp, bp->b_addr); + xfs_buf_ioerror(bp, EFSCORRUPTED); + return; + } + if (bip) { + struct xfs_attr3_rmt_hdr *rmt; + + rmt = (struct xfs_attr3_rmt_hdr *)ptr; + rmt->rm_lsn = cpu_to_be64(bip->bli_item.li_lsn); + } + xfs_update_cksum(ptr, XFS_LBSIZE(mp), XFS_ATTR3_RMT_CRC_OFF); + + len -= XFS_LBSIZE(mp); + ptr += XFS_LBSIZE(mp); + bno += mp->m_bsize; } - xfs_update_cksum(bp->b_addr, BBTOB(bp->b_length), - XFS_ATTR3_RMT_CRC_OFF); + ASSERT(len == 0); } const struct xfs_buf_ops xfs_attr3_rmt_buf_ops = { @@ -131,15 +203,16 @@ const struct xfs_buf_ops xfs_attr3_rmt_buf_ops = { .verify_write = xfs_attr3_rmt_write_verify, }; -static int +STATIC int xfs_attr3_rmt_hdr_set( struct xfs_mount *mp, + void *ptr, xfs_ino_t ino, uint32_t offset, uint32_t size, - struct xfs_buf *bp) + xfs_daddr_t bno) { - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; + struct xfs_attr3_rmt_hdr *rmt = ptr; if (!xfs_sb_version_hascrc(&mp->m_sb)) return 0; @@ -149,36 +222,107 @@ xfs_attr3_rmt_hdr_set( rmt->rm_bytes = cpu_to_be32(size); uuid_copy(&rmt->rm_uuid, &mp->m_sb.sb_uuid); rmt->rm_owner = cpu_to_be64(ino); - rmt->rm_blkno = cpu_to_be64(bp->b_bn); - bp->b_ops = &xfs_attr3_rmt_buf_ops; + rmt->rm_blkno = cpu_to_be64(bno); return sizeof(struct xfs_attr3_rmt_hdr); } /* - * Checking of the remote attribute header is split into two parts. the verifier - * does CRC, location and bounds checking, the unpacking function checks the - * attribute parameters and owner. + * Helper functions to copy attribute data in and out of the one disk extents */ -static bool -xfs_attr3_rmt_hdr_ok( - struct xfs_mount *mp, - xfs_ino_t ino, - uint32_t offset, - uint32_t size, - struct xfs_buf *bp) +STATIC int +xfs_attr_rmtval_copyout( + struct xfs_mount *mp, + struct xfs_buf *bp, + xfs_ino_t ino, + int *offset, + int *valuelen, + char **dst) { - struct xfs_attr3_rmt_hdr *rmt = bp->b_addr; + char *src = bp->b_addr; + xfs_daddr_t bno = bp->b_bn; + int len = BBTOB(bp->b_length); - if (offset != be32_to_cpu(rmt->rm_offset)) - return false; - if (size != be32_to_cpu(rmt->rm_bytes)) - return false; - if (ino != be64_to_cpu(rmt->rm_owner)) - return false; + ASSERT(len >= XFS_LBSIZE(mp)); - /* ok */ - return true; + while (len > 0 && *valuelen > 0) { + int hdr_size = 0; + int byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, XFS_LBSIZE(mp)); + + byte_cnt = min_t(int, *valuelen, byte_cnt); + + if (xfs_sb_version_hascrc(&mp->m_sb)) { + if (!xfs_attr3_rmt_hdr_ok(mp, src, ino, *offset, + byte_cnt, bno)) { + xfs_alert(mp, +"remote attribute header mismatch bno/off/len/owner (0x%llx/0x%x/Ox%x/0x%llx)", + bno, *offset, byte_cnt, ino); + return EFSCORRUPTED; + } + hdr_size = sizeof(struct xfs_attr3_rmt_hdr); + } + + memcpy(*dst, src + hdr_size, byte_cnt); + + /* roll buffer forwards */ + len -= XFS_LBSIZE(mp); + src += XFS_LBSIZE(mp); + bno += mp->m_bsize; + + /* roll attribute data forwards */ + *valuelen -= byte_cnt; + *dst += byte_cnt; + *offset += byte_cnt; + } + return 0; +} + +STATIC void +xfs_attr_rmtval_copyin( + struct xfs_mount *mp, + struct xfs_buf *bp, + xfs_ino_t ino, + int *offset, + int *valuelen, + char **src) +{ + char *dst = bp->b_addr; + xfs_daddr_t bno = bp->b_bn; + int len = BBTOB(bp->b_length); + + ASSERT(len >= XFS_LBSIZE(mp)); + + while (len > 0 && *valuelen > 0) { + int hdr_size; + int byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, XFS_LBSIZE(mp)); + + byte_cnt = min(*valuelen, byte_cnt); + hdr_size = xfs_attr3_rmt_hdr_set(mp, dst, ino, *offset, + byte_cnt, bno); + + memcpy(dst + hdr_size, *src, byte_cnt); + + /* + * If this is the last block, zero the remainder of it. + * Check that we are actually the last block, too. + */ + if (byte_cnt + hdr_size < XFS_LBSIZE(mp)) { + ASSERT(*valuelen - byte_cnt == 0); + ASSERT(len == XFS_LBSIZE(mp)); + memset(dst + hdr_size + byte_cnt, 0, + XFS_LBSIZE(mp) - hdr_size - byte_cnt); + } + + /* roll buffer forwards */ + len -= XFS_LBSIZE(mp); + dst += XFS_LBSIZE(mp); + bno += mp->m_bsize; + + /* roll attribute data forwards */ + *valuelen -= byte_cnt; + *src += byte_cnt; + *offset += byte_cnt; + } } /* @@ -192,13 +336,12 @@ xfs_attr_rmtval_get( struct xfs_bmbt_irec map[ATTR_RMTVALUE_MAPSIZE]; struct xfs_mount *mp = args->dp->i_mount; struct xfs_buf *bp; - xfs_daddr_t dblkno; xfs_dablk_t lblkno = args->rmtblkno; - void *dst = args->value; + char *dst = args->value; int valuelen = args->valuelen; int nmap; int error; - int blkcnt; + int blkcnt = args->rmtblkcnt; int i; int offset = 0; @@ -208,7 +351,6 @@ xfs_attr_rmtval_get( while (valuelen > 0) { nmap = ATTR_RMTVALUE_MAPSIZE; - blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno, blkcnt, map, &nmap, XFS_BMAPI_ATTRFORK); @@ -217,45 +359,29 @@ xfs_attr_rmtval_get( ASSERT(nmap >= 1); for (i = 0; (i < nmap) && (valuelen > 0); i++) { - int byte_cnt; - char *src; + xfs_daddr_t dblkno; + int dblkcnt; ASSERT((map[i].br_startblock != DELAYSTARTBLOCK) && (map[i].br_startblock != HOLESTARTBLOCK)); dblkno = XFS_FSB_TO_DADDR(mp, map[i].br_startblock); - blkcnt = XFS_FSB_TO_BB(mp, map[i].br_blockcount); + dblkcnt = XFS_FSB_TO_BB(mp, map[i].br_blockcount); error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp, - dblkno, blkcnt, 0, &bp, + dblkno, dblkcnt, 0, &bp, &xfs_attr3_rmt_buf_ops); if (error) return error; - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); - byte_cnt = min_t(int, valuelen, byte_cnt); - - src = bp->b_addr; - if (xfs_sb_version_hascrc(&mp->m_sb)) { - if (!xfs_attr3_rmt_hdr_ok(mp, args->dp->i_ino, - offset, byte_cnt, bp)) { - xfs_alert(mp, -"remote attribute header does not match required off/len/owner (0x%x/Ox%x,0x%llx)", - offset, byte_cnt, args->dp->i_ino); - xfs_buf_relse(bp); - return EFSCORRUPTED; - - } - - src += sizeof(struct xfs_attr3_rmt_hdr); - } - - memcpy(dst, src, byte_cnt); + error = xfs_attr_rmtval_copyout(mp, bp, args->dp->i_ino, + &offset, &valuelen, + &dst); xfs_buf_relse(bp); + if (error) + return error; - offset += byte_cnt; - dst += byte_cnt; - valuelen -= byte_cnt; - + /* roll attribute extent map forwards */ lblkno += map[i].br_blockcount; + blkcnt -= map[i].br_blockcount; } } ASSERT(valuelen == 0); @@ -273,17 +399,13 @@ xfs_attr_rmtval_set( struct xfs_inode *dp = args->dp; struct xfs_mount *mp = dp->i_mount; struct xfs_bmbt_irec map; - struct xfs_buf *bp; - xfs_daddr_t dblkno; xfs_dablk_t lblkno; xfs_fileoff_t lfileoff = 0; - void *src = args->value; + char *src = args->value; int blkcnt; int valuelen; int nmap; int error; - int hdrcnt = 0; - bool crcs = xfs_sb_version_hascrc(&mp->m_sb); int offset = 0; trace_xfs_attr_rmtval_set(args); @@ -292,21 +414,14 @@ xfs_attr_rmtval_set( * Find a "hole" in the attribute address space large enough for * us to drop the new attribute's value into. Because CRC enable * attributes have headers, we can't just do a straight byte to FSB - * conversion. We calculate the worst case block count in this case - * and we may not need that many, so we have to handle this when - * allocating the blocks below. + * conversion and have to take the header space into account. */ blkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen); - error = xfs_bmap_first_unused(args->trans, args->dp, blkcnt, &lfileoff, XFS_ATTR_FORK); if (error) return error; - /* Start with the attribute data. We'll allocate the rest afterwards. */ - if (crcs) - blkcnt = XFS_B_TO_FSB(mp, args->valuelen); - args->rmtblkno = lblkno = (xfs_dablk_t)lfileoff; args->rmtblkcnt = blkcnt; @@ -349,31 +464,6 @@ xfs_attr_rmtval_set( (map.br_startblock != HOLESTARTBLOCK)); lblkno += map.br_blockcount; blkcnt -= map.br_blockcount; - hdrcnt++; - - /* - * If we have enough blocks for the attribute data, calculate - * how many extra blocks we need for headers. We might run - * through this multiple times in the case that the additional - * headers in the blocks needed for the data fragments spills - * into requiring more blocks. e.g. for 512 byte blocks, we'll - * spill for another block every 9 headers we require in this - * loop. - * - * Note that this can result in contiguous allocation of blocks, - * so we don't use all the space we allocate for headers as we - * have one less header for each contiguous allocation that - * occurs in the map/write loop below. - */ - if (crcs && blkcnt == 0) { - int total_len; - - total_len = args->valuelen + - hdrcnt * sizeof(struct xfs_attr3_rmt_hdr); - blkcnt = XFS_B_TO_FSB(mp, total_len); - blkcnt -= args->rmtblkcnt; - args->rmtblkcnt += blkcnt; - } /* * Start the next trans in the chain. @@ -390,17 +480,15 @@ xfs_attr_rmtval_set( * the INCOMPLETE flag. */ lblkno = args->rmtblkno; - valuelen = args->valuelen; blkcnt = args->rmtblkcnt; + valuelen = args->valuelen; while (valuelen > 0) { - int byte_cnt; - int hdr_size; - int dblkcnt; - char *buf; + struct xfs_buf *bp; + xfs_daddr_t dblkno; + int dblkcnt; + + ASSERT(blkcnt > 0); - /* - * Try to remember where we decided to put the value. - */ xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi_read(dp, (xfs_fileoff_t)lblkno, @@ -419,29 +507,17 @@ xfs_attr_rmtval_set( if (!bp) return ENOMEM; bp->b_ops = &xfs_attr3_rmt_buf_ops; - buf = bp->b_addr; - byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, BBTOB(bp->b_length)); - byte_cnt = min_t(int, valuelen, byte_cnt); - hdr_size = xfs_attr3_rmt_hdr_set(mp, dp->i_ino, offset, - byte_cnt, bp); - ASSERT(hdr_size + byte_cnt <= BBTOB(bp->b_length)); - - memcpy(buf + hdr_size, src, byte_cnt); - - if (byte_cnt + hdr_size < BBTOB(bp->b_length)) - xfs_buf_zero(bp, byte_cnt + hdr_size, - BBTOB(bp->b_length) - byte_cnt - hdr_size); + xfs_attr_rmtval_copyin(mp, bp, args->dp->i_ino, &offset, + &valuelen, &src); error = xfs_bwrite(bp); /* GROT: NOTE: synchronous write */ xfs_buf_relse(bp); if (error) return error; - src += byte_cnt; - valuelen -= byte_cnt; - offset += byte_cnt; + /* roll attribute extent map forwards */ lblkno += map.br_blockcount; blkcnt -= map.br_blockcount; } @@ -454,19 +530,17 @@ xfs_attr_rmtval_set( * out-of-line buffer that it is stored on. */ int -xfs_attr_rmtval_remove(xfs_da_args_t *args) +xfs_attr_rmtval_remove( + struct xfs_da_args *args) { - xfs_mount_t *mp; - xfs_bmbt_irec_t map; - xfs_buf_t *bp; - xfs_daddr_t dblkno; - xfs_dablk_t lblkno; - int valuelen, blkcnt, nmap, error, done, committed; + struct xfs_mount *mp = args->dp->i_mount; + xfs_dablk_t lblkno; + int blkcnt; + int error; + int done; trace_xfs_attr_rmtval_remove(args); - mp = args->dp->i_mount; - /* * Roll through the "value", invalidating the attribute value's blocks. * Note that args->rmtblkcnt is the minimum number of data blocks we'll @@ -476,10 +550,13 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) * lookups. */ lblkno = args->rmtblkno; - valuelen = args->valuelen; - blkcnt = xfs_attr3_rmt_blocks(mp, valuelen); - while (valuelen > 0) { - int dblkcnt; + blkcnt = args->rmtblkcnt; + while (blkcnt > 0) { + struct xfs_bmbt_irec map; + struct xfs_buf *bp; + xfs_daddr_t dblkno; + int dblkcnt; + int nmap; /* * Try to remember where we decided to put the value. @@ -506,21 +583,19 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) bp = NULL; } - valuelen -= XFS_ATTR3_RMT_BUF_SPACE(mp, - XFS_FSB_TO_B(mp, map.br_blockcount)); - lblkno += map.br_blockcount; blkcnt -= map.br_blockcount; - blkcnt = max(blkcnt, xfs_attr3_rmt_blocks(mp, valuelen)); } /* * Keep de-allocating extents until the remote-value region is gone. */ - blkcnt = lblkno - args->rmtblkno; lblkno = args->rmtblkno; + blkcnt = args->rmtblkcnt; done = 0; while (!done) { + int committed; + xfs_bmap_init(args->flist, args->firstblock); error = xfs_bunmapi(args->trans, args->dp, lblkno, blkcnt, XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA, diff --git a/fs/xfs/xfs_attr_remote.h b/fs/xfs/xfs_attr_remote.h index c7cca60a062a..92a8fd7977cc 100644 --- a/fs/xfs/xfs_attr_remote.h +++ b/fs/xfs/xfs_attr_remote.h @@ -20,6 +20,14 @@ #define XFS_ATTR3_RMT_MAGIC 0x5841524d /* XARM */ +/* + * There is one of these headers per filesystem block in a remote attribute. + * This is done to ensure there is a 1:1 mapping between the attribute value + * length and the number of blocks needed to store the attribute. This makes the + * verification of a buffer a little more complex, but greatly simplifies the + * allocation, reading and writing of these attributes as we don't have to guess + * the number of blocks needed to store the attribute data. + */ struct xfs_attr3_rmt_hdr { __be32 rm_magic; __be32 rm_offset; @@ -39,6 +47,8 @@ struct xfs_attr3_rmt_hdr { extern const struct xfs_buf_ops xfs_attr3_rmt_buf_ops; +int xfs_attr3_rmt_blocks(struct xfs_mount *mp, int attrlen); + int xfs_attr_rmtval_get(struct xfs_da_args *args); int xfs_attr_rmtval_set(struct xfs_da_args *args); int xfs_attr_rmtval_remove(struct xfs_da_args *args); diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index 0d2554299688..1b2472a46e46 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -513,6 +513,7 @@ _xfs_buf_find( xfs_alert(btp->bt_mount, "%s: Block out of range: block 0x%llx, EOFS 0x%llx ", __func__, blkno, eofs); + WARN_ON(1); return NULL; } From 2baad6121e2b2fa3428ee6cb2298107be11ab23a Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2013 13:43:54 +0100 Subject: [PATCH 234/429] x86, crc32-pclmul: Fix build with older binutils binutils prior to 2.18 (e.g. the ones found on SLE10) don't support assembling PEXTRD, so a macro based approach like the one for PCLMULQDQ in the same file should be used. This requires making the helper macros capable of recognizing 32-bit general purpose register operands. [ hpa: tagging for stable as it is a low risk build fix ] Signed-off-by: Jan Beulich Link: http://lkml.kernel.org/r/51A6142A02000078000D99D8@nat28.tlf.novell.com Cc: Alexander Boyko Cc: Herbert Xu Cc: Huang Ying Cc: v3.9 Signed-off-by: H. Peter Anvin --- arch/x86/crypto/crc32-pclmul_asm.S | 2 +- arch/x86/include/asm/inst.h | 74 +++++++++++++++++++++++++++++- 2 files changed, 73 insertions(+), 3 deletions(-) diff --git a/arch/x86/crypto/crc32-pclmul_asm.S b/arch/x86/crypto/crc32-pclmul_asm.S index 94c27df8a549..f247304299a2 100644 --- a/arch/x86/crypto/crc32-pclmul_asm.S +++ b/arch/x86/crypto/crc32-pclmul_asm.S @@ -240,7 +240,7 @@ fold_64: pand %xmm3, %xmm1 PCLMULQDQ 0x00, CONSTANT, %xmm1 pxor %xmm2, %xmm1 - pextrd $0x01, %xmm1, %eax + PEXTRD 0x01, %xmm1, %eax ret ENDPROC(crc32_pclmul_le_16) diff --git a/arch/x86/include/asm/inst.h b/arch/x86/include/asm/inst.h index 280bf7fb6aba..3e115273ed88 100644 --- a/arch/x86/include/asm/inst.h +++ b/arch/x86/include/asm/inst.h @@ -9,12 +9,68 @@ #define REG_NUM_INVALID 100 -#define REG_TYPE_R64 0 -#define REG_TYPE_XMM 1 +#define REG_TYPE_R32 0 +#define REG_TYPE_R64 1 +#define REG_TYPE_XMM 2 #define REG_TYPE_INVALID 100 + .macro R32_NUM opd r32 + \opd = REG_NUM_INVALID + .ifc \r32,%eax + \opd = 0 + .endif + .ifc \r32,%ecx + \opd = 1 + .endif + .ifc \r32,%edx + \opd = 2 + .endif + .ifc \r32,%ebx + \opd = 3 + .endif + .ifc \r32,%esp + \opd = 4 + .endif + .ifc \r32,%ebp + \opd = 5 + .endif + .ifc \r32,%esi + \opd = 6 + .endif + .ifc \r32,%edi + \opd = 7 + .endif +#ifdef CONFIG_X86_64 + .ifc \r32,%r8d + \opd = 8 + .endif + .ifc \r32,%r9d + \opd = 9 + .endif + .ifc \r32,%r10d + \opd = 10 + .endif + .ifc \r32,%r11d + \opd = 11 + .endif + .ifc \r32,%r12d + \opd = 12 + .endif + .ifc \r32,%r13d + \opd = 13 + .endif + .ifc \r32,%r14d + \opd = 14 + .endif + .ifc \r32,%r15d + \opd = 15 + .endif +#endif + .endm + .macro R64_NUM opd r64 \opd = REG_NUM_INVALID +#ifdef CONFIG_X86_64 .ifc \r64,%rax \opd = 0 .endif @@ -63,6 +119,7 @@ .ifc \r64,%r15 \opd = 15 .endif +#endif .endm .macro XMM_NUM opd xmm @@ -118,10 +175,13 @@ .endm .macro REG_TYPE type reg + R32_NUM reg_type_r32 \reg R64_NUM reg_type_r64 \reg XMM_NUM reg_type_xmm \reg .if reg_type_r64 <> REG_NUM_INVALID \type = REG_TYPE_R64 + .elseif reg_type_r32 <> REG_NUM_INVALID + \type = REG_TYPE_R32 .elseif reg_type_xmm <> REG_NUM_INVALID \type = REG_TYPE_XMM .else @@ -162,6 +222,16 @@ .byte \imm8 .endm + .macro PEXTRD imm8 xmm gpr + R32_NUM extrd_opd1 \gpr + XMM_NUM extrd_opd2 \xmm + PFX_OPD_SIZE + PFX_REX extrd_opd1 extrd_opd2 + .byte 0x0f, 0x3a, 0x16 + MODRM 0xc0 extrd_opd1 extrd_opd2 + .byte \imm8 + .endm + .macro AESKEYGENASSIST rcon xmm1 xmm2 XMM_NUM aeskeygen_opd1 \xmm1 XMM_NUM aeskeygen_opd2 \xmm2 From 5187b28ff08249ab8a162e802209ed04e271ca02 Mon Sep 17 00:00:00 2001 From: Pekka Riikonen Date: Mon, 13 May 2013 14:32:07 +0200 Subject: [PATCH 235/429] x86: Allow FPU to be used at interrupt time even with eagerfpu With the addition of eagerfpu the irq_fpu_usable() now returns false negatives especially in the case of ksoftirqd and interrupted idle task, two common cases for FPU use for example in networking/crypto. With eagerfpu=off FPU use is possible in those contexts. This is because of the eagerfpu check in interrupted_kernel_fpu_idle(): ... * For now, with eagerfpu we will return interrupted kernel FPU * state as not-idle. TBD: Ideally we can change the return value * to something like __thread_has_fpu(current). But we need to * be careful of doing __thread_clear_has_fpu() before saving * the FPU etc for supporting nested uses etc. For now, take * the simple route! ... if (use_eager_fpu()) return 0; As eagerfpu is automatically "on" on those CPUs that also have the features like AES-NI this patch changes the eagerfpu check to return 1 in case the kernel_fpu_begin() has not been said yet. Once it has been the __thread_has_fpu() will start returning 0. Notice that with eagerfpu the __thread_has_fpu is always true initially. FPU use is thus always possible no matter what task is under us, unless the state has already been saved with kernel_fpu_begin(). [ hpa: this is a performance regression, not a correctness regression, but since it can be quite serious on CPUs which need encryption at interrupt time I am marking this for urgent/stable. ] Signed-off-by: Pekka Riikonen Link: http://lkml.kernel.org/r/alpine.GSO.2.00.1305131356320.18@git.silcnet.org Cc: v3.7+ Signed-off-by: H. Peter Anvin --- arch/x86/kernel/i387.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index 245a71db401a..cb339097b9ea 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -22,23 +22,19 @@ /* * Were we in an interrupt that interrupted kernel mode? * - * For now, with eagerfpu we will return interrupted kernel FPU - * state as not-idle. TBD: Ideally we can change the return value - * to something like __thread_has_fpu(current). But we need to - * be careful of doing __thread_clear_has_fpu() before saving - * the FPU etc for supporting nested uses etc. For now, take - * the simple route! - * * On others, we can do a kernel_fpu_begin/end() pair *ONLY* if that * pair does nothing at all: the thread must not have fpu (so * that we don't try to save the FPU state), and TS must * be set (so that the clts/stts pair does nothing that is * visible in the interrupted kernel thread). + * + * Except for the eagerfpu case when we return 1 unless we've already + * been eager and saved the state in kernel_fpu_begin(). */ static inline bool interrupted_kernel_fpu_idle(void) { if (use_eager_fpu()) - return 0; + return __thread_has_fpu(current); return !__thread_has_fpu(current) && (read_cr0() & X86_CR0_TS); @@ -78,8 +74,8 @@ void __kernel_fpu_begin(void) struct task_struct *me = current; if (__thread_has_fpu(me)) { - __save_init_fpu(me); __thread_clear_has_fpu(me); + __save_init_fpu(me); /* We do 'stts()' in __kernel_fpu_end() */ } else if (!use_eager_fpu()) { this_cpu_write(fpu_owner_task, NULL); From e38b170695d4108eeb6cd84db36f567fc6de4120 Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Wed, 29 May 2013 22:55:56 +0000 Subject: [PATCH 236/429] be2net: Mark checksum fail for IP fragmented packets HW does not compute L4 checksum for IP Fragmented packets. Signed-off-by: Kalesh AP Signed-off-by: Somnath Kotur Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 1 + drivers/net/ethernet/emulex/benet/be_hw.h | 2 +- drivers/net/ethernet/emulex/benet/be_main.c | 7 ++++++- 3 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index f544b297c9ab..0a510684e468 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -262,6 +262,7 @@ struct be_rx_compl_info { u8 ipv6; u8 vtm; u8 pkt_type; + u8 ip_frag; }; struct be_rx_obj { diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h index 3c1099b47f2a..8780183c6d1c 100644 --- a/drivers/net/ethernet/emulex/benet/be_hw.h +++ b/drivers/net/ethernet/emulex/benet/be_hw.h @@ -356,7 +356,7 @@ struct amap_eth_rx_compl_v0 { u8 ip_version; /* dword 1 */ u8 macdst[6]; /* dword 1 */ u8 vtp; /* dword 1 */ - u8 rsvd0; /* dword 1 */ + u8 ip_frag; /* dword 1 */ u8 fragndx[10]; /* dword 1 */ u8 ct[2]; /* dword 1 */ u8 sw; /* dword 1 */ diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index ca2967b0f18b..32a6927ca977 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -1599,6 +1599,8 @@ static void be_parse_rx_compl_v0(struct be_eth_rx_compl *compl, compl); } rxcp->port = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, port, compl); + rxcp->ip_frag = AMAP_GET_BITS(struct amap_eth_rx_compl_v0, + ip_frag, compl); } static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo) @@ -1620,6 +1622,9 @@ static struct be_rx_compl_info *be_rx_compl_get(struct be_rx_obj *rxo) else be_parse_rx_compl_v0(compl, rxcp); + if (rxcp->ip_frag) + rxcp->l4_csum = 0; + if (rxcp->vlanf) { /* vlanf could be wrongly set in some cards. * ignore if vtm is not set */ @@ -2168,7 +2173,7 @@ static irqreturn_t be_msix(int irq, void *dev) static inline bool do_gro(struct be_rx_compl_info *rxcp) { - return (rxcp->tcpf && !rxcp->err) ? true : false; + return (rxcp->tcpf && !rxcp->err && rxcp->l4_csum) ? true : false; } static int be_process_rx(struct be_rx_obj *rxo, struct napi_struct *napi, From 01e5b2c4559d084f4eaf0d160d84cc185db141ba Mon Sep 17 00:00:00 2001 From: Somnath Kotur Date: Wed, 29 May 2013 22:56:17 +0000 Subject: [PATCH 237/429] be2net: Fix crash on 2nd invocation of PCI AER/EEH error_detected hook During a PCI EEH/AER error recovery flow, if the device did not successfully restart, the error_detected() hook may be called a second time with a "perm_failure" state. This patch skips over driver cleanup for the second invocation of the callback. Also, Lancer error recovery code is fixed-up to handle these changes. Signed-off-by: Kalesh AP Signed-off-by: Somnath kotur Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 6 +-- drivers/net/ethernet/emulex/benet/be_main.c | 48 ++++++++++----------- 2 files changed, 26 insertions(+), 28 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index a236ecd27cf3..1db2df61b8af 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -562,7 +562,7 @@ int lancer_test_and_set_rdy_state(struct be_adapter *adapter) resource_error = lancer_provisioning_error(adapter); if (resource_error) - return -1; + return -EAGAIN; status = lancer_wait_ready(adapter); if (!status) { @@ -590,8 +590,8 @@ int lancer_test_and_set_rdy_state(struct be_adapter *adapter) * when PF provisions resources. */ resource_error = lancer_provisioning_error(adapter); - if (status == -1 && !resource_error) - adapter->eeh_error = true; + if (resource_error) + status = -EAGAIN; return status; } diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 32a6927ca977..8bc1b21b1c79 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4098,6 +4098,7 @@ static int be_get_initial_config(struct be_adapter *adapter) static int lancer_recover_func(struct be_adapter *adapter) { + struct device *dev = &adapter->pdev->dev; int status; status = lancer_test_and_set_rdy_state(adapter); @@ -4109,8 +4110,7 @@ static int lancer_recover_func(struct be_adapter *adapter) be_clear(adapter); - adapter->hw_error = false; - adapter->fw_timeout = false; + be_clear_all_error(adapter); status = be_setup(adapter); if (status) @@ -4122,13 +4122,13 @@ static int lancer_recover_func(struct be_adapter *adapter) goto err; } - dev_err(&adapter->pdev->dev, - "Adapter SLIPORT recovery succeeded\n"); + dev_err(dev, "Error recovery successful\n"); return 0; err: - if (adapter->eeh_error) - dev_err(&adapter->pdev->dev, - "Adapter SLIPORT recovery failed\n"); + if (status == -EAGAIN) + dev_err(dev, "Waiting for resource provisioning\n"); + else + dev_err(dev, "Error recovery failed\n"); return status; } @@ -4137,28 +4137,27 @@ static void be_func_recovery_task(struct work_struct *work) { struct be_adapter *adapter = container_of(work, struct be_adapter, func_recovery_work.work); - int status; + int status = 0; be_detect_error(adapter); if (adapter->hw_error && lancer_chip(adapter)) { - if (adapter->eeh_error) - goto out; - rtnl_lock(); netif_device_detach(adapter->netdev); rtnl_unlock(); status = lancer_recover_func(adapter); - if (!status) netif_device_attach(adapter->netdev); } -out: - schedule_delayed_work(&adapter->func_recovery_work, - msecs_to_jiffies(1000)); + /* In Lancer, for all errors other than provisioning error (-EAGAIN), + * no need to attempt further recovery. + */ + if (!status || status == -EAGAIN) + schedule_delayed_work(&adapter->func_recovery_work, + msecs_to_jiffies(1000)); } static void be_worker(struct work_struct *work) @@ -4441,20 +4440,19 @@ static pci_ers_result_t be_eeh_err_detected(struct pci_dev *pdev, dev_err(&adapter->pdev->dev, "EEH error detected\n"); - adapter->eeh_error = true; + if (!adapter->eeh_error) { + adapter->eeh_error = true; - cancel_delayed_work_sync(&adapter->func_recovery_work); + cancel_delayed_work_sync(&adapter->func_recovery_work); - rtnl_lock(); - netif_device_detach(netdev); - rtnl_unlock(); - - if (netif_running(netdev)) { rtnl_lock(); - be_close(netdev); + netif_device_detach(netdev); + if (netif_running(netdev)) + be_close(netdev); rtnl_unlock(); + + be_clear(adapter); } - be_clear(adapter); if (state == pci_channel_io_perm_failure) return PCI_ERS_RESULT_DISCONNECT; @@ -4479,7 +4477,6 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev) int status; dev_info(&adapter->pdev->dev, "EEH reset\n"); - be_clear_all_error(adapter); status = pci_enable_device(pdev); if (status) @@ -4497,6 +4494,7 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev) return PCI_ERS_RESULT_DISCONNECT; pci_cleanup_aer_uncorrect_error_status(pdev); + be_clear_all_error(adapter); return PCI_ERS_RESULT_RECOVERED; } From 21363ca873334391992f2f424856aa864345bb61 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Wed, 29 May 2013 21:35:23 -0700 Subject: [PATCH 238/429] target/file: Fix off-by-one READ_CAPACITY bug for !S_ISBLK export This patch fixes a bug where FILEIO was incorrectly reporting the number of logical blocks (+ 1) when using non struct block_device export mode. It changes fd_get_blocks() to follow all other backend ->get_blocks() cases, and reduces the calculated dev_size by one dev->dev_attrib.block_size number of bytes, and also fixes initial fd_block_size assignment at fd_configure_device() time introduced in commit 0fd97ccf4. Reported-by: Wenchao Xia Reported-by: Badari Pulavarty Tested-by: Badari Pulavarty Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_file.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index 1b1d544e927a..b11890d85120 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -153,6 +153,7 @@ static int fd_configure_device(struct se_device *dev) struct request_queue *q = bdev_get_queue(inode->i_bdev); unsigned long long dev_size; + fd_dev->fd_block_size = bdev_logical_block_size(inode->i_bdev); /* * Determine the number of bytes from i_size_read() minus * one (1) logical sector from underlying struct block_device @@ -199,6 +200,7 @@ static int fd_configure_device(struct se_device *dev) goto fail; } + fd_dev->fd_block_size = FD_BLOCKSIZE; /* * Limit UNMAP emulation to 8k Number of LBAs (NoLB) */ @@ -217,9 +219,7 @@ static int fd_configure_device(struct se_device *dev) dev->dev_attrib.max_write_same_len = 0x1000; } - fd_dev->fd_block_size = dev->dev_attrib.hw_block_size; - - dev->dev_attrib.hw_block_size = FD_BLOCKSIZE; + dev->dev_attrib.hw_block_size = fd_dev->fd_block_size; dev->dev_attrib.hw_max_sectors = FD_MAX_SECTORS; dev->dev_attrib.hw_queue_depth = FD_MAX_DEVICE_QUEUE_DEPTH; @@ -694,11 +694,12 @@ static sector_t fd_get_blocks(struct se_device *dev) * to handle underlying block_device resize operations. */ if (S_ISBLK(i->i_mode)) - dev_size = (i_size_read(i) - fd_dev->fd_block_size); + dev_size = i_size_read(i); else dev_size = fd_dev->fd_dev_size; - return div_u64(dev_size, dev->dev_attrib.block_size); + return div_u64(dev_size - dev->dev_attrib.block_size, + dev->dev_attrib.block_size); } static struct sbc_ops fd_sbc_ops = { From cea4dcfdad926a27a18e188720efe0f2c9403456 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 23 May 2013 10:32:17 -0700 Subject: [PATCH 239/429] iscsi-target: fix heap buffer overflow on error If a key was larger than 64 bytes, as checked by iscsi_check_key(), the error response packet, generated by iscsi_add_notunderstood_response(), would still attempt to copy the entire key into the packet, overflowing the structure on the heap. Remote preauthentication kernel memory corruption was possible if a target was configured and listening on the network. CVE-2013-2850 Signed-off-by: Kees Cook Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_parameters.c | 8 +++----- drivers/target/iscsi/iscsi_target_parameters.h | 4 +++- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c index c2185fc31136..e38222191a33 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.c +++ b/drivers/target/iscsi/iscsi_target_parameters.c @@ -758,9 +758,9 @@ static int iscsi_add_notunderstood_response( } INIT_LIST_HEAD(&extra_response->er_list); - strncpy(extra_response->key, key, strlen(key) + 1); - strncpy(extra_response->value, NOTUNDERSTOOD, - strlen(NOTUNDERSTOOD) + 1); + strlcpy(extra_response->key, key, sizeof(extra_response->key)); + strlcpy(extra_response->value, NOTUNDERSTOOD, + sizeof(extra_response->value)); list_add_tail(&extra_response->er_list, ¶m_list->extra_response_list); @@ -1629,8 +1629,6 @@ int iscsi_decode_text_input( if (phase & PHASE_SECURITY) { if (iscsi_check_for_auth_key(key) > 0) { - char *tmpptr = key + strlen(key); - *tmpptr = '='; kfree(tmpbuf); return 1; } diff --git a/drivers/target/iscsi/iscsi_target_parameters.h b/drivers/target/iscsi/iscsi_target_parameters.h index 915b06798505..a47046a752aa 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.h +++ b/drivers/target/iscsi/iscsi_target_parameters.h @@ -1,8 +1,10 @@ #ifndef ISCSI_PARAMETERS_H #define ISCSI_PARAMETERS_H +#include + struct iscsi_extra_response { - char key[64]; + char key[KEY_MAXLEN]; char value[32]; struct list_head er_list; } ____cacheline_aligned; From d68c380590c390a488fe214e5ebf9439216ac3ba Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 27 May 2013 12:28:25 -0300 Subject: [PATCH 240/429] clk: mxs: Include clk mxs header file Fix the following sparse warnings: drivers/clk/mxs/clk-imx28.c:72:5: warning: symbol 'mxs_saif_clkmux_select' was not declared. Should it be static? drivers/clk/mxs/clk-imx28.c:156:12: warning: symbol 'mx28_clocks_init' was not declared. Should it be static? Signed-off-by: Fabio Estevam Acked-by: Shawn Guo Signed-off-by: Mike Turquette [mturquette@linaro.org: fixed $SUBJECT line] --- drivers/clk/mxs/clk-imx28.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c index d0e5eed146de..4faf0afc44cd 100644 --- a/drivers/clk/mxs/clk-imx28.c +++ b/drivers/clk/mxs/clk-imx28.c @@ -10,6 +10,7 @@ */ #include +#include #include #include #include From 970fa986fadb1165cf38b45b70e98302a3bee497 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 31 May 2013 12:45:09 +1000 Subject: [PATCH 241/429] drm/qxl: fix build warnings on 32-bit Just the usual printk related warnings. Signed-off-by: Dave Airlie --- drivers/gpu/drm/qxl/qxl_ioctl.c | 4 ++-- drivers/gpu/drm/qxl/qxl_kms.c | 9 +++++---- 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/qxl/qxl_ioctl.c b/drivers/gpu/drm/qxl/qxl_ioctl.c index 6db7370373ea..a4b71b25fa53 100644 --- a/drivers/gpu/drm/qxl/qxl_ioctl.c +++ b/drivers/gpu/drm/qxl/qxl_ioctl.c @@ -151,7 +151,7 @@ static int qxl_execbuffer_ioctl(struct drm_device *dev, void *data, struct qxl_bo *cmd_bo; int release_type; struct drm_qxl_command *commands = - (struct drm_qxl_command *)execbuffer->commands; + (struct drm_qxl_command *)(uintptr_t)execbuffer->commands; if (DRM_COPY_FROM_USER(&user_cmd, &commands[cmd_num], sizeof(user_cmd))) @@ -193,7 +193,7 @@ static int qxl_execbuffer_ioctl(struct drm_device *dev, void *data, for (i = 0 ; i < user_cmd.relocs_num; ++i) { if (DRM_COPY_FROM_USER(&reloc, - &((struct drm_qxl_reloc *)user_cmd.relocs)[i], + &((struct drm_qxl_reloc *)(uintptr_t)user_cmd.relocs)[i], sizeof(reloc))) { qxl_bo_list_unreserve(&reloc_list, true); qxl_release_unreserve(qdev, release); diff --git a/drivers/gpu/drm/qxl/qxl_kms.c b/drivers/gpu/drm/qxl/qxl_kms.c index 85127ed24cfd..e27ce2a907cf 100644 --- a/drivers/gpu/drm/qxl/qxl_kms.c +++ b/drivers/gpu/drm/qxl/qxl_kms.c @@ -128,12 +128,13 @@ int qxl_device_init(struct qxl_device *qdev, qdev->vram_mapping = io_mapping_create_wc(qdev->vram_base, pci_resource_len(pdev, 0)); qdev->surface_mapping = io_mapping_create_wc(qdev->surfaceram_base, qdev->surfaceram_size); - DRM_DEBUG_KMS("qxl: vram %p-%p(%dM %dk), surface %p-%p(%dM %dk)\n", - (void *)qdev->vram_base, (void *)pci_resource_end(pdev, 0), + DRM_DEBUG_KMS("qxl: vram %llx-%llx(%dM %dk), surface %llx-%llx(%dM %dk)\n", + (unsigned long long)qdev->vram_base, + (unsigned long long)pci_resource_end(pdev, 0), (int)pci_resource_len(pdev, 0) / 1024 / 1024, (int)pci_resource_len(pdev, 0) / 1024, - (void *)qdev->surfaceram_base, - (void *)pci_resource_end(pdev, 1), + (unsigned long long)qdev->surfaceram_base, + (unsigned long long)pci_resource_end(pdev, 1), (int)qdev->surfaceram_size / 1024 / 1024, (int)qdev->surfaceram_size / 1024); From 8b1dacb6ae15c94d50642a474e5af8981555253b Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 30 May 2013 19:55:34 +0800 Subject: [PATCH 242/429] ALSA: sis7019: fix error return code in sis_chip_create() Fix to return a negative error code in the pci_set_dma_mask() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Takashi Iwai --- sound/pci/sis7019.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c index d59abe1682c5..748e82d4d257 100644 --- a/sound/pci/sis7019.c +++ b/sound/pci/sis7019.c @@ -1341,7 +1341,8 @@ static int sis_chip_create(struct snd_card *card, if (rc) goto error_out; - if (pci_set_dma_mask(pci, DMA_BIT_MASK(30)) < 0) { + rc = pci_set_dma_mask(pci, DMA_BIT_MASK(30)); + if (rc < 0) { dev_err(&pci->dev, "architecture does not support 30-bit PCI busmaster DMA"); goto error_out_enabled; } From 6b4dc2bd7e706570167e086a41b87ea250a55b34 Mon Sep 17 00:00:00 2001 From: Ebben Aries Date: Wed, 29 May 2013 22:27:18 -0600 Subject: [PATCH 243/429] ALSA: hda - add dock support for Thinkpad T431s Add a model/fixup string "lenovo-dock", for Thinkpad T431s, to allow sound in docking station. Tested on Lenovo T431s with ThinkPad Mini Dock Plus Series 3 Signed-off-by: Ebben Aries Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 59d2e91a9ab6..9658faf2271d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3530,6 +3530,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x21fa, "Thinkpad X230", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x21f3, "Thinkpad T430", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x21fb, "Thinkpad T430s", ALC269_FIXUP_LENOVO_DOCK), + SND_PCI_QUIRK(0x17aa, 0x2208, "Thinkpad T431s", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x2203, "Thinkpad X230 Tablet", ALC269_FIXUP_LENOVO_DOCK), SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K), SND_PCI_QUIRK(0x17aa, 0x9e54, "LENOVO NB", ALC269_FIXUP_LENOVO_EAPD), From d5ddad4168348337d98d6b8f156a3892de444411 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 31 May 2013 00:46:11 -0700 Subject: [PATCH 244/429] target: Propigate up ->cmd_kref put return via transport_generic_free_cmd Go ahead and propigate up the ->cmd_kref put return value from target_put_sess_cmd() -> transport_release_cmd() -> transport_put_cmd() -> transport_generic_free_cmd(). This is useful for certain fabrics when determining the active I/O shutdown case with SCF_ACK_KREF where a final target_put_sess_cmd() is still required by the caller. Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 28 ++++++++++++++------------ include/target/target_core_fabric.h | 2 +- 2 files changed, 16 insertions(+), 14 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index bbca144821c5..21e315874a54 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -65,7 +65,7 @@ static void transport_complete_task_attr(struct se_cmd *cmd); static void transport_handle_queue_full(struct se_cmd *cmd, struct se_device *dev); static int transport_generic_get_mem(struct se_cmd *cmd); -static void transport_put_cmd(struct se_cmd *cmd); +static int transport_put_cmd(struct se_cmd *cmd); static void target_complete_ok_work(struct work_struct *work); int init_se_kmem_caches(void) @@ -1944,7 +1944,7 @@ static inline void transport_free_pages(struct se_cmd *cmd) * This routine unconditionally frees a command, and reference counting * or list removal must be done in the caller. */ -static void transport_release_cmd(struct se_cmd *cmd) +static int transport_release_cmd(struct se_cmd *cmd) { BUG_ON(!cmd->se_tfo); @@ -1956,11 +1956,11 @@ static void transport_release_cmd(struct se_cmd *cmd) * If this cmd has been setup with target_get_sess_cmd(), drop * the kref and call ->release_cmd() in kref callback. */ - if (cmd->check_release != 0) { - target_put_sess_cmd(cmd->se_sess, cmd); - return; - } + if (cmd->check_release != 0) + return target_put_sess_cmd(cmd->se_sess, cmd); + cmd->se_tfo->release_cmd(cmd); + return 1; } /** @@ -1969,7 +1969,7 @@ static void transport_release_cmd(struct se_cmd *cmd) * * This routine releases our reference to the command and frees it if possible. */ -static void transport_put_cmd(struct se_cmd *cmd) +static int transport_put_cmd(struct se_cmd *cmd) { unsigned long flags; @@ -1977,7 +1977,7 @@ static void transport_put_cmd(struct se_cmd *cmd) if (atomic_read(&cmd->t_fe_count) && !atomic_dec_and_test(&cmd->t_fe_count)) { spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return; + return 0; } if (cmd->transport_state & CMD_T_DEV_ACTIVE) { @@ -1987,8 +1987,7 @@ static void transport_put_cmd(struct se_cmd *cmd) spin_unlock_irqrestore(&cmd->t_state_lock, flags); transport_free_pages(cmd); - transport_release_cmd(cmd); - return; + return transport_release_cmd(cmd); } void *transport_kmap_data_sg(struct se_cmd *cmd) @@ -2153,13 +2152,15 @@ static void transport_write_pending_qf(struct se_cmd *cmd) } } -void transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) +int transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) { + int ret = 0; + if (!(cmd->se_cmd_flags & SCF_SE_LUN_CMD)) { if (wait_for_tasks && (cmd->se_cmd_flags & SCF_SCSI_TMR_CDB)) transport_wait_for_tasks(cmd); - transport_release_cmd(cmd); + ret = transport_release_cmd(cmd); } else { if (wait_for_tasks) transport_wait_for_tasks(cmd); @@ -2167,8 +2168,9 @@ void transport_generic_free_cmd(struct se_cmd *cmd, int wait_for_tasks) if (cmd->se_lun) transport_lun_remove_cmd(cmd); - transport_put_cmd(cmd); + ret = transport_put_cmd(cmd); } + return ret; } EXPORT_SYMBOL(transport_generic_free_cmd); diff --git a/include/target/target_core_fabric.h b/include/target/target_core_fabric.h index 8a26f0d55fd1..1dcce9cc99b9 100644 --- a/include/target/target_core_fabric.h +++ b/include/target/target_core_fabric.h @@ -114,7 +114,7 @@ sense_reason_t transport_generic_new_cmd(struct se_cmd *); void target_execute_cmd(struct se_cmd *cmd); -void transport_generic_free_cmd(struct se_cmd *, int); +int transport_generic_free_cmd(struct se_cmd *, int); bool transport_wait_for_tasks(struct se_cmd *); int transport_check_aborted_status(struct se_cmd *, int); From aafc9d158b0039e600fc429246c7bb04a111fb26 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 31 May 2013 00:49:41 -0700 Subject: [PATCH 245/429] iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [] dump_stack+0x19/0x1f [ 257.360963] [] warn_slowpath_common+0x62/0x7b [ 257.367669] [] warn_slowpath_null+0x15/0x17 [ 257.374181] [] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [] ? __migrate_task+0x110/0x110 [ 257.471674] [] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [] ? wake_up_bit+0x25/0x25 [ 257.503652] [] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [] kthread+0xb0/0xb8 [ 257.518329] [] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [] ret_from_fork+0x7c/0xb0 [ 257.532133] [] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 12 +++--- drivers/target/iscsi/iscsi_target_erl2.c | 12 +++--- drivers/target/iscsi/iscsi_target_util.c | 54 +++++++++++++++++------- drivers/target/iscsi/iscsi_target_util.h | 2 +- 4 files changed, 52 insertions(+), 28 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 262ef1f23b38..d7705e5824fb 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -651,7 +651,7 @@ static int iscsit_add_reject( cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL); if (!cmd->buf_ptr) { pr_err("Unable to allocate memory for cmd->buf_ptr\n"); - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); return -1; } @@ -697,7 +697,7 @@ int iscsit_add_reject_from_cmd( cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL); if (!cmd->buf_ptr) { pr_err("Unable to allocate memory for cmd->buf_ptr\n"); - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); return -1; } @@ -1743,7 +1743,7 @@ int iscsit_handle_nop_out(struct iscsi_conn *conn, struct iscsi_cmd *cmd, return 0; out: if (cmd) - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); ping_out: kfree(ping_data); return ret; @@ -2251,7 +2251,7 @@ iscsit_handle_logout_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, if (conn->conn_state != TARG_CONN_STATE_LOGGED_IN) { pr_err("Received logout request on connection that" " is not in logged in state, ignoring request.\n"); - iscsit_release_cmd(cmd); + iscsit_free_cmd(cmd, false); return 0; } @@ -3665,7 +3665,7 @@ iscsit_immediate_queue(struct iscsi_conn *conn, struct iscsi_cmd *cmd, int state list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, false); break; case ISTATE_SEND_NOPIN_WANT_RESPONSE: iscsit_mod_nopin_response_timer(conn); @@ -4122,7 +4122,7 @@ static void iscsit_release_commands_from_conn(struct iscsi_conn *conn) iscsit_increment_maxcmdsn(cmd, sess); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); } diff --git a/drivers/target/iscsi/iscsi_target_erl2.c b/drivers/target/iscsi/iscsi_target_erl2.c index ba6091bf93fc..45a5afd5ea13 100644 --- a/drivers/target/iscsi/iscsi_target_erl2.c +++ b/drivers/target/iscsi/iscsi_target_erl2.c @@ -143,7 +143,7 @@ void iscsit_free_connection_recovery_entires(struct iscsi_session *sess) list_del(&cmd->i_conn_node); cmd->conn = NULL; spin_unlock(&cr->conn_recovery_cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock(&cr->conn_recovery_cmd_lock); } spin_unlock(&cr->conn_recovery_cmd_lock); @@ -165,7 +165,7 @@ void iscsit_free_connection_recovery_entires(struct iscsi_session *sess) list_del(&cmd->i_conn_node); cmd->conn = NULL; spin_unlock(&cr->conn_recovery_cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock(&cr->conn_recovery_cmd_lock); } spin_unlock(&cr->conn_recovery_cmd_lock); @@ -248,7 +248,7 @@ void iscsit_discard_cr_cmds_by_expstatsn( iscsit_remove_cmd_from_connection_recovery(cmd, sess); spin_unlock(&cr->conn_recovery_cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock(&cr->conn_recovery_cmd_lock); } spin_unlock(&cr->conn_recovery_cmd_lock); @@ -302,7 +302,7 @@ int iscsit_discard_unacknowledged_ooo_cmdsns_for_conn(struct iscsi_conn *conn) list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); } spin_unlock_bh(&conn->cmd_lock); @@ -355,7 +355,7 @@ int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *conn) list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); continue; } @@ -375,7 +375,7 @@ int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *conn) iscsi_sna_gte(cmd->cmd_sn, conn->sess->exp_cmd_sn)) { list_del(&cmd->i_conn_node); spin_unlock_bh(&conn->cmd_lock); - iscsit_free_cmd(cmd); + iscsit_free_cmd(cmd, true); spin_lock_bh(&conn->cmd_lock); continue; } diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index 2cc6c9a3ffb8..08a3bacef0c5 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -676,40 +676,56 @@ void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *conn) void iscsit_release_cmd(struct iscsi_cmd *cmd) { - struct iscsi_conn *conn = cmd->conn; - - iscsit_free_r2ts_from_list(cmd); - iscsit_free_all_datain_reqs(cmd); - kfree(cmd->buf_ptr); kfree(cmd->pdu_list); kfree(cmd->seq_list); kfree(cmd->tmr_req); kfree(cmd->iov_data); - if (conn) { - iscsit_remove_cmd_from_immediate_queue(cmd, conn); - iscsit_remove_cmd_from_response_queue(cmd, conn); - } - kmem_cache_free(lio_cmd_cache, cmd); } -void iscsit_free_cmd(struct iscsi_cmd *cmd) +static void __iscsit_free_cmd(struct iscsi_cmd *cmd, bool scsi_cmd, + bool check_queues) { + struct iscsi_conn *conn = cmd->conn; + + if (scsi_cmd) { + if (cmd->data_direction == DMA_TO_DEVICE) { + iscsit_stop_dataout_timer(cmd); + iscsit_free_r2ts_from_list(cmd); + } + if (cmd->data_direction == DMA_FROM_DEVICE) + iscsit_free_all_datain_reqs(cmd); + } + + if (conn && check_queues) { + iscsit_remove_cmd_from_immediate_queue(cmd, conn); + iscsit_remove_cmd_from_response_queue(cmd, conn); + } +} + +void iscsit_free_cmd(struct iscsi_cmd *cmd, bool shutdown) +{ + struct se_cmd *se_cmd = NULL; + int rc; /* * Determine if a struct se_cmd is associated with * this struct iscsi_cmd. */ switch (cmd->iscsi_opcode) { case ISCSI_OP_SCSI_CMD: - if (cmd->data_direction == DMA_TO_DEVICE) - iscsit_stop_dataout_timer(cmd); + se_cmd = &cmd->se_cmd; + __iscsit_free_cmd(cmd, true, shutdown); /* * Fallthrough */ case ISCSI_OP_SCSI_TMFUNC: - transport_generic_free_cmd(&cmd->se_cmd, 1); + rc = transport_generic_free_cmd(&cmd->se_cmd, 1); + if (!rc && shutdown && se_cmd && se_cmd->se_sess) { + __iscsit_free_cmd(cmd, true, shutdown); + target_put_sess_cmd(se_cmd->se_sess, se_cmd); + } break; case ISCSI_OP_REJECT: /* @@ -718,11 +734,19 @@ void iscsit_free_cmd(struct iscsi_cmd *cmd) * associated cmd->se_cmd needs to be released. */ if (cmd->se_cmd.se_tfo != NULL) { - transport_generic_free_cmd(&cmd->se_cmd, 1); + se_cmd = &cmd->se_cmd; + __iscsit_free_cmd(cmd, true, shutdown); + + rc = transport_generic_free_cmd(&cmd->se_cmd, 1); + if (!rc && shutdown && se_cmd->se_sess) { + __iscsit_free_cmd(cmd, true, shutdown); + target_put_sess_cmd(se_cmd->se_sess, se_cmd); + } break; } /* Fall-through */ default: + __iscsit_free_cmd(cmd, false, shutdown); cmd->release_cmd(cmd); break; } diff --git a/drivers/target/iscsi/iscsi_target_util.h b/drivers/target/iscsi/iscsi_target_util.h index 4f8e01a47081..a4422659d049 100644 --- a/drivers/target/iscsi/iscsi_target_util.h +++ b/drivers/target/iscsi/iscsi_target_util.h @@ -29,7 +29,7 @@ extern void iscsit_remove_cmd_from_tx_queues(struct iscsi_cmd *, struct iscsi_co extern bool iscsit_conn_all_queues_empty(struct iscsi_conn *); extern void iscsit_free_queue_reqs_for_conn(struct iscsi_conn *); extern void iscsit_release_cmd(struct iscsi_cmd *); -extern void iscsit_free_cmd(struct iscsi_cmd *); +extern void iscsit_free_cmd(struct iscsi_cmd *, bool); extern int iscsit_check_session_usage_count(struct iscsi_session *); extern void iscsit_dec_session_usage_count(struct iscsi_session *); extern void iscsit_inc_session_usage_count(struct iscsi_session *); From df66834a43c461de2565c45d815288ba1c0def37 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Wed, 29 May 2013 12:37:17 +1000 Subject: [PATCH 246/429] m68k/mac: Fix unexpected interrupt with CONFIG_EARLY_PRINTK The present code does not wait for the SCC to finish resetting itself before trying to initialise the device. The result is that the SCC interrupt sources become enabled (if they weren't already). This leads to an early boot crash (unexpected interrupt) given CONFIG_EARLY_PRINTK. Fix this by adding a delay. A successful reset disables the interrupt sources. Also, after the reset for channel A setup, the SCC then gets a second reset for channel B setup which leaves channel A uninitialised again. Fix this by performing the reset only once. Signed-off-by: Finn Thain Cc: stable@vger.kernel.org Signed-off-by: Geert Uytterhoeven --- arch/m68k/kernel/head.S | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index d197e7ff62c5..ac85f16534af 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -2752,11 +2752,9 @@ func_return get_new_page #ifdef CONFIG_MAC L(scc_initable_mac): - .byte 9,12 /* Reset */ .byte 4,0x44 /* x16, 1 stopbit, no parity */ .byte 3,0xc0 /* receiver: 8 bpc */ .byte 5,0xe2 /* transmitter: 8 bpc, assert dtr/rts */ - .byte 9,0 /* no interrupts */ .byte 10,0 /* NRZ */ .byte 11,0x50 /* use baud rate generator */ .byte 12,1,13,0 /* 38400 baud */ @@ -2899,6 +2897,7 @@ func_start serial_init,%d0/%d1/%a0/%a1 is_not_mac(L(serial_init_not_mac)) #ifdef SERIAL_DEBUG + /* You may define either or both of these. */ #define MAC_USE_SCC_A /* Modem port */ #define MAC_USE_SCC_B /* Printer port */ @@ -2908,9 +2907,21 @@ func_start serial_init,%d0/%d1/%a0/%a1 #define mac_scc_cha_b_data_offset 0x4 #define mac_scc_cha_a_data_offset 0x6 +#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B) + movel %pc@(L(mac_sccbase)),%a0 + /* Reset SCC device */ + moveb #9,%a0@(mac_scc_cha_a_ctrl_offset) + moveb #0xc0,%a0@(mac_scc_cha_a_ctrl_offset) + /* Wait for 5 PCLK cycles, which is about 68 CPU cycles */ + /* 5 / 3.6864 MHz = approx. 1.36 us = 68 / 50 MHz */ + movel #35,%d0 +5: + subq #1,%d0 + jne 5b +#endif + #ifdef MAC_USE_SCC_A /* Initialize channel A */ - movel %pc@(L(mac_sccbase)),%a0 lea %pc@(L(scc_initable_mac)),%a1 5: moveb %a1@+,%d0 jmi 6f @@ -2922,9 +2933,6 @@ func_start serial_init,%d0/%d1/%a0/%a1 #ifdef MAC_USE_SCC_B /* Initialize channel B */ -#ifndef MAC_USE_SCC_A /* Load mac_sccbase only if needed */ - movel %pc@(L(mac_sccbase)),%a0 -#endif /* MAC_USE_SCC_A */ lea %pc@(L(scc_initable_mac)),%a1 7: moveb %a1@+,%d0 jmi 8f @@ -2933,6 +2941,7 @@ func_start serial_init,%d0/%d1/%a0/%a1 jra 7b 8: #endif /* MAC_USE_SCC_B */ + #endif /* SERIAL_DEBUG */ jra L(serial_init_done) @@ -3006,17 +3015,17 @@ func_start serial_putc,%d0/%d1/%a0/%a1 #ifdef SERIAL_DEBUG -#ifdef MAC_USE_SCC_A +#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B) movel %pc@(L(mac_sccbase)),%a1 +#endif + +#ifdef MAC_USE_SCC_A 3: btst #2,%a1@(mac_scc_cha_a_ctrl_offset) jeq 3b moveb %d0,%a1@(mac_scc_cha_a_data_offset) #endif /* MAC_USE_SCC_A */ #ifdef MAC_USE_SCC_B -#ifndef MAC_USE_SCC_A /* Load mac_sccbase only if needed */ - movel %pc@(L(mac_sccbase)),%a1 -#endif /* MAC_USE_SCC_A */ 4: btst #2,%a1@(mac_scc_cha_b_ctrl_offset) jeq 4b moveb %d0,%a1@(mac_scc_cha_b_data_offset) From 3ee2102fbe92150af2b6d1d87f6bbefbaff0c7ca Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 31 May 2013 10:41:04 +0200 Subject: [PATCH 247/429] ALSA: hda - Add headset quirk for two Dell machines This quirk is required for the headset mic to work on these two machines. BugLink: https://bugs.launchpad.net/bugs/1186170 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9658faf2271d..02e22b4458d2 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3493,6 +3493,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x05f4, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05f6, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x05f8, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x0609, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2), SND_PCI_QUIRK(0x103c, 0x18e6, "HP", ALC269_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x1973, "HP Pavilion", ALC269_FIXUP_HP_MUTE_LED_MIC1), From 381cc2b9705512ee7c7f1839cbdde374625a2a9f Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Fri, 24 May 2013 12:02:35 +0100 Subject: [PATCH 248/429] arm64: treat unhandled compat el0 traps as undef Currently, if a compat process reads or writes from/to a disabled cp15/cp14 register, the trap is not handled by the el0_sync_compat handler, and the kernel will head to bad_mode, where it will die(), and oops(). For 64 bit processes, disabled system register accesses are currently treated as unhandled instructions. This patch modifies entry.S to treat these unhandled traps as undefined instructions, sending a SIGILL to userspace. This gives processes a chance to handle this and stop using inaccessible registers, and prevents further issues in the kernel as a result of the die(). Reported-by: Johannes Jensen Signed-off-by: Mark Rutland Signed-off-by: Catalin Marinas --- arch/arm64/kernel/entry.S | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index c7e047049f2c..1d1314280a03 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -390,6 +390,16 @@ el0_sync_compat: b.eq el0_fpsimd_exc cmp x24, #ESR_EL1_EC_UNKNOWN // unknown exception in EL0 b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP15_32 // CP15 MRC/MCR trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP15_64 // CP15 MRRC/MCRR trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP14_MR // CP14 MRC/MCR trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP14_LS // CP14 LDC/STC trap + b.eq el0_undef + cmp x24, #ESR_EL1_EC_CP14_64 // CP14 MRRC/MCRR trap + b.eq el0_undef cmp x24, #ESR_EL1_EC_BREAKPT_EL0 // debug exception in EL0 b.ge el0_dbg b el0_inv From 9955ac47f4ba1c95ecb6092aeaefb40a22e99268 Mon Sep 17 00:00:00 2001 From: Mark Rutland Date: Tue, 28 May 2013 15:54:15 +0100 Subject: [PATCH 249/429] arm64: don't kill the kernel on a bad esr from el0 Rather than completely killing the kernel if we receive an esr value we can't deal with in the el0 handlers, send the process a SIGILL and log the esr value in the hope that we can debug it. If we receive a bad esr from el1, we'll die() as before. Signed-off-by: Mark Rutland Signed-off-by: Catalin Marinas Cc: stable@vger.kernel.org --- arch/arm64/kernel/traps.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index f1ff9bad00f7..f30852d28590 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -311,14 +311,20 @@ asmlinkage long do_ni_syscall(struct pt_regs *regs) */ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr) { + siginfo_t info; + void __user *pc = (void __user *)instruction_pointer(regs); console_verbose(); pr_crit("Bad mode in %s handler detected, code 0x%08x\n", handler[reason], esr); + __show_regs(regs); - die("Oops - bad mode", regs, 0); - local_irq_disable(); - panic("bad mode"); + info.si_signo = SIGILL; + info.si_errno = 0; + info.si_code = ILL_ILLOPC; + info.si_addr = pc; + + arm64_notify_die("Oops - bad mode", regs, &info, 0); } void __pte_error(const char *file, int line, unsigned long val) From 8b811bae69cf30e0a9676d7dcafb0cf16f13b3bc Mon Sep 17 00:00:00 2001 From: Stefan Weinhuber Date: Tue, 28 May 2013 15:26:06 +0200 Subject: [PATCH 250/429] s390/dasd: fix handling of gone paths When a path is gone and dasd_generic_path_event is called with a PE_PATH_GONE event, we must assume that any I/O request on that subchannel is still running. This is unlike the dasd_generic_notify handler and the CIO_NO_PATH event, which implies that the subchannel has been cleared. If dasd_generic_path_event finds that the path has been the last usable path, it must not call dasd_generic_last_path_gone (which would reset the state of running requests), but just set the DASD_STOPPED_DC_WAIT bit. Signed-off-by: Stefan Weinhuber Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 4361d9772c42..d72a9216ee2e 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -3440,8 +3440,16 @@ void dasd_generic_path_event(struct ccw_device *cdev, int *path_event) device->path_data.opm &= ~eventlpm; device->path_data.ppm &= ~eventlpm; device->path_data.npm &= ~eventlpm; - if (oldopm && !device->path_data.opm) - dasd_generic_last_path_gone(device); + if (oldopm && !device->path_data.opm) { + dev_warn(&device->cdev->dev, + "No verified channel paths remain " + "for the device\n"); + DBF_DEV_EVENT(DBF_WARNING, device, + "%s", "last verified path gone"); + dasd_eer_write(device, NULL, DASD_EER_NOPATH); + dasd_device_set_stop_bits(device, + DASD_STOPPED_DC_WAIT); + } } if (path_event[chp] & PE_PATH_AVAILABLE) { device->path_data.opm &= ~eventlpm; From e86cbd8765bd2e1f9eeb209822449c9b1e5958cf Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 29 May 2013 13:08:39 +0200 Subject: [PATCH 251/429] s390/pgtable: Fix gmap notifier address The address of the gmap notifier was broken, resulting in unhandled validity intercepts in KVM. Fix the rmap->vmaddr to be on a segment boundary. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/mm/pgtable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 18dc417aaf79..a938b548f07e 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -492,7 +492,7 @@ static int gmap_connect_pgtable(unsigned long address, unsigned long segment, mp = (struct gmap_pgtable *) page->index; rmap->gmap = gmap; rmap->entry = segment_ptr; - rmap->vmaddr = address; + rmap->vmaddr = address & PMD_MASK; spin_lock(&mm->page_table_lock); if (*segment_ptr == segment) { list_add(&rmap->list, &mp->mapper); From 24a923e4e9a296a8f8ff852109d423ba07616cc4 Mon Sep 17 00:00:00 2001 From: Dustin Kirkland Date: Fri, 31 May 2013 10:41:43 -0500 Subject: [PATCH 252/429] Update eCryptFS maintainers Remove myself from the eCryptFS kernel maintainers. Add the ecryptfs.org website. I will continue to actively maintain and monitor the ecryptfs-utils user space project and packages. Signed-off-by: Dustin Kirkland Signed-off-by: Tyler Hicks --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 829c0321108b..d151f5a43d97 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2890,8 +2890,8 @@ F: drivers/media/dvb-frontends/ec100* ECRYPT FILE SYSTEM M: Tyler Hicks -M: Dustin Kirkland L: ecryptfs@vger.kernel.org +W: http://ecryptfs.org W: https://launchpad.net/ecryptfs S: Supported F: Documentation/filesystems/ecryptfs.txt From 5d477b6079619910dab882fa229cce1f14f86cf8 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 10 May 2013 14:04:11 +0200 Subject: [PATCH 253/429] vfs: Fix invalid ida_remove() call MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When the group id of a shared mount is not allocated, the umount still tries to call mnt_release_group_id(), which eventually hits a kernel warning at ida_remove() spewing a message like: ida_remove called for id=0 which is not allocated. This patch fixes the bug simply checking the group id in the caller. Reported-by: Cristian Rodríguez Signed-off-by: Takashi Iwai Signed-off-by: Al Viro --- fs/pnode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/pnode.c b/fs/pnode.c index 3d2a7141b87a..9af0df15256e 100644 --- a/fs/pnode.c +++ b/fs/pnode.c @@ -83,7 +83,8 @@ static int do_make_slave(struct mount *mnt) if (peer_mnt == mnt) peer_mnt = NULL; } - if (IS_MNT_SHARED(mnt) && list_empty(&mnt->mnt_share)) + if (mnt->mnt_group_id && IS_MNT_SHARED(mnt) && + list_empty(&mnt->mnt_share)) mnt_release_group_id(mnt); list_del_init(&mnt->mnt_share); From 801d9d26bfd6e88e9cf0efbb30b649d1bdc15dcf Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 29 May 2013 13:26:53 +0100 Subject: [PATCH 254/429] fix buffer leak after "scsi: saner replacements for ->proc_info()" That patch failed to set proc_scsi_fops' .release method. Signed-off-by: Jan Beulich Signed-off-by: Al Viro --- drivers/scsi/scsi_proc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c index db66357211ed..86f0c5d5c116 100644 --- a/drivers/scsi/scsi_proc.c +++ b/drivers/scsi/scsi_proc.c @@ -84,6 +84,7 @@ static int proc_scsi_host_open(struct inode *inode, struct file *file) static const struct file_operations proc_scsi_fops = { .open = proc_scsi_host_open, + .release = single_release, .read = seq_read, .llseek = seq_lseek, .write = proc_scsi_host_write From 1d7095c72d35eee4ebc28e66563e636b9adafeb2 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 17 May 2013 15:21:56 -0400 Subject: [PATCH 255/429] qnx6: qnx6_readdir() has a braino in pos calculation We want to mask lower 5 bits out, not leave only those and clear the rest... As it is, we end up always starting to read from the beginning of directory, no matter what the current position had been. Signed-off-by: Al Viro --- fs/qnx6/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/qnx6/dir.c b/fs/qnx6/dir.c index 8798d065e400..afa6be6fc397 100644 --- a/fs/qnx6/dir.c +++ b/fs/qnx6/dir.c @@ -120,7 +120,7 @@ static int qnx6_readdir(struct file *filp, void *dirent, filldir_t filldir) struct inode *inode = file_inode(filp); struct super_block *s = inode->i_sb; struct qnx6_sb_info *sbi = QNX6_SB(s); - loff_t pos = filp->f_pos & (QNX6_DIR_ENTRY_SIZE - 1); + loff_t pos = filp->f_pos & ~(QNX6_DIR_ENTRY_SIZE - 1); unsigned long npages = dir_pages(inode); unsigned long n = pos >> PAGE_CACHE_SHIFT; unsigned start = (pos & ~PAGE_CACHE_MASK) / QNX6_DIR_ENTRY_SIZE; From 31abdab9c11bb1694ecd1476a7edbe8e964d94ac Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 18 May 2013 02:38:52 -0400 Subject: [PATCH 256/429] hpfs: deadlock and race in directory lseek() For one thing, there's an ABBA deadlock on hpfs fs-wide lock and i_mutex in hpfs_dir_lseek() - there's a lot of methods that grab the former with the caller already holding the latter, so it must take i_mutex first. For another, locking the damn thing, carefully validating the offset, then dropping locks and assigning the offset is obviously racy. Moreover, we _must_ do hpfs_add_pos(), or the machinery in dnode.c won't modify the sucker on B-tree surgeries. Signed-off-by: Al Viro --- fs/hpfs/dir.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/hpfs/dir.c b/fs/hpfs/dir.c index 546f6d39713a..834ac13c04b7 100644 --- a/fs/hpfs/dir.c +++ b/fs/hpfs/dir.c @@ -33,25 +33,27 @@ static loff_t hpfs_dir_lseek(struct file *filp, loff_t off, int whence) if (whence == SEEK_DATA || whence == SEEK_HOLE) return -EINVAL; + mutex_lock(&i->i_mutex); hpfs_lock(s); /*printk("dir lseek\n");*/ if (new_off == 0 || new_off == 1 || new_off == 11 || new_off == 12 || new_off == 13) goto ok; - mutex_lock(&i->i_mutex); pos = ((loff_t) hpfs_de_as_down_as_possible(s, hpfs_inode->i_dno) << 4) + 1; while (pos != new_off) { if (map_pos_dirent(i, &pos, &qbh)) hpfs_brelse4(&qbh); else goto fail; if (pos == 12) goto fail; } - mutex_unlock(&i->i_mutex); + hpfs_add_pos(i, &filp->f_pos); ok: + filp->f_pos = new_off; hpfs_unlock(s); - return filp->f_pos = new_off; -fail: mutex_unlock(&i->i_mutex); + return new_off; +fail: /*printk("illegal lseek: %016llx\n", new_off);*/ hpfs_unlock(s); + mutex_unlock(&i->i_mutex); return -ESPIPE; } From 448293aadb54ab38b9c053bf9f1eecafdc0ed214 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 22 May 2013 13:41:26 -0400 Subject: [PATCH 257/429] befs_readdir(): do not increment ->f_pos if filldir tells us to stop Signed-off-by: Al Viro --- fs/befs/linuxvfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c index 8615ee89ab55..f95dddced968 100644 --- a/fs/befs/linuxvfs.c +++ b/fs/befs/linuxvfs.c @@ -265,8 +265,8 @@ befs_readdir(struct file *filp, void *dirent, filldir_t filldir) result = filldir(dirent, keybuf, keysize, filp->f_pos, (ino_t) value, d_type); } - - filp->f_pos++; + if (!result) + filp->f_pos++; befs_debug(sb, "<--- befs_readdir() filp->f_pos %Ld", filp->f_pos); From 65ac057bce426b4abdf42384c4e09e40a634df32 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 31 May 2013 14:28:38 +0000 Subject: [PATCH 258/429] trivial: atmel_lcdfb: add missing error message When a too small framebuffer is given, the atmel_lcdfb_check_var silently fails. Adding an error message will save some head scratching. Signed-off-by: Richard Genoud Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- drivers/video/atmel_lcdfb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 540909de6247..6e6491fb83b7 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -461,8 +461,11 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var, if (info->fix.smem_len) { unsigned int smem_len = (var->xres_virtual * var->yres_virtual * ((var->bits_per_pixel + 7) / 8)); - if (smem_len > info->fix.smem_len) + if (smem_len > info->fix.smem_len) { + dev_err(dev, "Frame buffer is too small (%u) for screen size (need at least %u)\n", + info->fix.smem_len, smem_len); return -EINVAL; + } } /* Saturate vertical and horizontal timings at maximum values */ From 56c21b53ab071feb3ce93375a563ead745fa7105 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Fri, 31 May 2013 15:49:35 +0000 Subject: [PATCH 259/429] atmel_lcdfb: blank the backlight on remove When removing atmel_lcdfb module, the backlight is unregistered but not blanked. (only for CONFIG_BACKLIGHT_ATMEL_LCDC case). This can result in the screen going full white depending on how the PWM is wired. Signed-off-by: Richard Genoud Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- drivers/video/atmel_lcdfb.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 6e6491fb83b7..effdb373b8db 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -223,8 +223,14 @@ static void init_backlight(struct atmel_lcdfb_info *sinfo) static void exit_backlight(struct atmel_lcdfb_info *sinfo) { - if (sinfo->backlight) - backlight_device_unregister(sinfo->backlight); + if (!sinfo->backlight) + return; + + if (sinfo->backlight->ops) { + sinfo->backlight->props.power = FB_BLANK_POWERDOWN; + sinfo->backlight->ops->update_status(sinfo->backlight); + } + backlight_device_unregister(sinfo->backlight); } #else From 4ad1f70ebcdb69393ce083f514bf4a4a3a3e65cb Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 23 May 2013 04:38:22 -0400 Subject: [PATCH 260/429] zoran: racy refcount handling in vm_ops ->open()/->close() worse, we lock ->resource_lock too late when we are destroying the final clonal VMA; the check for lack of other mappings of the same opened file can race with mmap(). Signed-off-by: Al Viro --- drivers/media/pci/zoran/zoran.h | 2 +- drivers/media/pci/zoran/zoran_driver.c | 15 ++++++++------- 2 files changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/media/pci/zoran/zoran.h b/drivers/media/pci/zoran/zoran.h index ca2754a3cd63..5e040085c2ff 100644 --- a/drivers/media/pci/zoran/zoran.h +++ b/drivers/media/pci/zoran/zoran.h @@ -176,7 +176,7 @@ struct zoran_fh; struct zoran_mapping { struct zoran_fh *fh; - int count; + atomic_t count; }; struct zoran_buffer { diff --git a/drivers/media/pci/zoran/zoran_driver.c b/drivers/media/pci/zoran/zoran_driver.c index 1168a84a737d..d133c30c3fdc 100644 --- a/drivers/media/pci/zoran/zoran_driver.c +++ b/drivers/media/pci/zoran/zoran_driver.c @@ -2803,8 +2803,7 @@ static void zoran_vm_open (struct vm_area_struct *vma) { struct zoran_mapping *map = vma->vm_private_data; - - map->count++; + atomic_inc(&map->count); } static void @@ -2815,7 +2814,7 @@ zoran_vm_close (struct vm_area_struct *vma) struct zoran *zr = fh->zr; int i; - if (--map->count > 0) + if (!atomic_dec_and_mutex_lock(&map->count, &zr->resource_lock)) return; dprintk(3, KERN_INFO "%s: %s - munmap(%s)\n", ZR_DEVNAME(zr), @@ -2828,14 +2827,16 @@ zoran_vm_close (struct vm_area_struct *vma) kfree(map); /* Any buffers still mapped? */ - for (i = 0; i < fh->buffers.num_buffers; i++) - if (fh->buffers.buffer[i].map) + for (i = 0; i < fh->buffers.num_buffers; i++) { + if (fh->buffers.buffer[i].map) { + mutex_unlock(&zr->resource_lock); return; + } + } dprintk(3, KERN_INFO "%s: %s - free %s buffers\n", ZR_DEVNAME(zr), __func__, mode_name(fh->map_mode)); - mutex_lock(&zr->resource_lock); if (fh->map_mode == ZORAN_MAP_MODE_RAW) { if (fh->buffers.active != ZORAN_FREE) { @@ -2939,7 +2940,7 @@ zoran_mmap (struct file *file, goto mmap_unlock_and_return; } map->fh = fh; - map->count = 1; + atomic_set(&map->count, 1); vma->vm_ops = &zoran_vm_ops; vma->vm_flags |= VM_DONTEXPAND; From 0bdc7acba56a7ca4232f15f37b16f7ec079385ab Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 31 May 2013 15:07:52 -0400 Subject: [PATCH 261/429] reiserfs: fix spurious multiple-fill in reiserfs_readdir_dentry After sleeping for filldir(), we check to see if the file system has changed and research. The next_pos pointer is updated but its value isn't pushed into the key used for the search itself. As a result, the search returns the same item that the last cycle of the loop did and filldir() is called multiple times with the same data. The end result is that the buffer can contain the same name multiple times. This can be returned to userspace or used internally in the xattr code where it can manifest with the following warning: jdm-20004 reiserfs_delete_xattrs: Couldn't delete all xattrs (-2) reiserfs_for_each_xattr uses reiserfs_readdir_dentry to iterate over the xattr names and ends up trying to unlink the same name twice. The second attempt fails with -ENOENT and the error is returned. At some point I'll need to add support into reiserfsck to remove the orphaned directories left behind when this occurs. The fix is to push the value into the key before researching. Signed-off-by: Jeff Mahoney Signed-off-by: Jan Kara --- fs/reiserfs/dir.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c index 66c53b642a88..6c2d136561cb 100644 --- a/fs/reiserfs/dir.c +++ b/fs/reiserfs/dir.c @@ -204,6 +204,8 @@ int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent, next_pos = deh_offset(deh) + 1; if (item_moved(&tmp_ih, &path_to_entry)) { + set_cpu_key_k_offset(&pos_key, + next_pos); goto research; } } /* for */ From 4a8570112b76a63ad21cfcbe2783f98f7fd5ba1b Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 31 May 2013 15:54:17 -0400 Subject: [PATCH 262/429] reiserfs: fix problems with chowning setuid file w/ xattrs reiserfs_chown_xattrs() takes the iattr struct passed into ->setattr and uses it to iterate over all the attrs associated with a file to change ownership of xattrs (and transfer quota associated with the xattr files). When the setuid bit is cleared during chown, ATTR_MODE and iattr->ia_mode are passed to all the xattrs as well. This means that the xattr directory will have S_IFREG added to its mode bits. This has been prevented in practice by a missing IS_PRIVATE check in reiserfs_acl_chmod, which caused a double-lock to occur while holding the write lock. Since the file system was completely locked up, the writeout of the corrupted mode never happened. This patch temporarily clears everything but ATTR_UID|ATTR_GID for the calls to reiserfs_setattr and adds the missing IS_PRIVATE check. Signed-off-by: Jeff Mahoney Signed-off-by: Jan Kara --- fs/reiserfs/xattr.c | 14 +++++++++++++- fs/reiserfs/xattr_acl.c | 3 +++ 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 4cce1d9552fb..821bcf70e467 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -318,7 +318,19 @@ static int delete_one_xattr(struct dentry *dentry, void *data) static int chown_one_xattr(struct dentry *dentry, void *data) { struct iattr *attrs = data; - return reiserfs_setattr(dentry, attrs); + int ia_valid = attrs->ia_valid; + int err; + + /* + * We only want the ownership bits. Otherwise, we'll do + * things like change a directory to a regular file if + * ATTR_MODE is set. + */ + attrs->ia_valid &= (ATTR_UID|ATTR_GID); + err = reiserfs_setattr(dentry, attrs); + attrs->ia_valid = ia_valid; + + return err; } /* No i_mutex, but the inode is unconnected. */ diff --git a/fs/reiserfs/xattr_acl.c b/fs/reiserfs/xattr_acl.c index d7c01ef64eda..6c8767fdfc6a 100644 --- a/fs/reiserfs/xattr_acl.c +++ b/fs/reiserfs/xattr_acl.c @@ -443,6 +443,9 @@ int reiserfs_acl_chmod(struct inode *inode) int depth; int error; + if (IS_PRIVATE(inode)) + return 0; + if (S_ISLNK(inode->i_mode)) return -EOPNOTSUPP; From a1457c0ce976bad1356b9b0437f2a5c3ab8a9cfc Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 31 May 2013 15:51:17 -0400 Subject: [PATCH 263/429] reiserfs: fix deadlock with nfs racing on create/lookup Reiserfs is currently able to be deadlocked by having two NFS clients where one has removed and recreated a file and another is accessing the file with an open file handle. If one client deletes and recreates a file with timing such that the recreated file obtains the same [dirid, objectid] pair as the original file while another client accesses the file via file handle, the create and lookup can race and deadlock if the lookup manages to create the in-memory inode first. The create thread, in insert_inode_locked4, will hold the write lock while waiting on the other inode to be unlocked. The lookup thread, anywhere in the iget path, will release and reacquire the write lock while it schedules. If it needs to reacquire the lock while the create thread has it, it will never be able to make forward progress because it needs to reacquire the lock before ultimately unlocking the inode. This patch drops the write lock across the insert_inode_locked4 call so that the ordering of inode_wait -> write lock is retained. Since this would have been the case before the BKL push-down, this is safe. Signed-off-by: Jeff Mahoney Signed-off-by: Jan Kara --- fs/reiserfs/inode.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 77d6d47abc83..f844533792ee 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -1811,11 +1811,16 @@ int reiserfs_new_inode(struct reiserfs_transaction_handle *th, TYPE_STAT_DATA, SD_SIZE, MAX_US_INT); memcpy(INODE_PKEY(inode), &(ih.ih_key), KEY_SIZE); args.dirid = le32_to_cpu(ih.ih_key.k_dir_id); - if (insert_inode_locked4(inode, args.objectid, - reiserfs_find_actor, &args) < 0) { + + reiserfs_write_unlock(inode->i_sb); + err = insert_inode_locked4(inode, args.objectid, + reiserfs_find_actor, &args); + reiserfs_write_lock(inode->i_sb); + if (err) { err = -EINVAL; goto out_bad_inode; } + if (old_format_only(sb)) /* not a perfect generation count, as object ids can be reused, but ** this is as good as reiserfs can do right now. From 1fc29bacedeabb278080e31bb9c1ecb49f143c3b Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 31 May 2013 10:00:18 -0400 Subject: [PATCH 264/429] cifs: fix off-by-one bug in build_unc_path_to_root commit 839db3d10a (cifs: fix up handling of prefixpath= option) changed the code such that the vol->prepath no longer contained a leading delimiter and then fixed up the places that accessed that field to account for that change. One spot in build_unc_path_to_root was missed however. When doing the pointer addition on pos, that patch failed to account for the fact that we had already incremented "pos" by one when adding the length of the prepath. This caused a buffer overrun by one byte. This patch fixes the problem by correcting the handling of "pos". Cc: # v3.8+ Reported-by: Marcus Moeller Reported-by: Ken Fallon Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 5b97e56ddbca..e3bc39bb9d12 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3279,8 +3279,8 @@ build_unc_path_to_root(const struct smb_vol *vol, pos = full_path + unc_len; if (pplen) { - *pos++ = CIFS_DIR_SEP(cifs_sb); - strncpy(pos, vol->prepath, pplen); + *pos = CIFS_DIR_SEP(cifs_sb); + strncpy(pos + 1, vol->prepath, pplen); pos += pplen; } From 35f7097fcedec63fcba1852dbee96f74a2d90878 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:37 +0000 Subject: [PATCH 265/429] powerpc/tm: Make room for hypervisor in abort cause codes PAPR carves out 0xff-0xe0 for hypervisor use of transactional memory software abort cause codes. Unfortunately we don't respect this currently. Below fixes this to move our cause codes to below this region. Signed-off-by: Michael Neuling Cc: # 3.9 only Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/reg.h | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index a6136515c7f2..8f6a94b2dc99 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -113,14 +113,15 @@ /* Reason codes describing kernel causes for transaction aborts. By convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if - the failure is persistent. + the failure is persistent. PAPR saves 0xff-0xe0 for the hypervisor. */ -#define TM_CAUSE_RESCHED 0xfe -#define TM_CAUSE_TLBI 0xfc -#define TM_CAUSE_FAC_UNAV 0xfa -#define TM_CAUSE_SYSCALL 0xf9 /* Persistent */ -#define TM_CAUSE_MISC 0xf6 -#define TM_CAUSE_SIGNAL 0xf4 +#define TM_CAUSE_PERSISTENT 0x01 +#define TM_CAUSE_RESCHED 0xde +#define TM_CAUSE_TLBI 0xdc +#define TM_CAUSE_FAC_UNAV 0xda +#define TM_CAUSE_SYSCALL 0xd8 /* future use */ +#define TM_CAUSE_MISC 0xd6 /* future use */ +#define TM_CAUSE_SIGNAL 0xd4 #if defined(CONFIG_PPC_BOOK3S_64) #define MSR_64BIT MSR_SF From 24b92375dc4ec8a15262e8aaaab60b7404d4b1e7 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:38 +0000 Subject: [PATCH 266/429] powerpc/tm: Update cause codes documentation Signed-off-by: Michael Neuling Cc: # 3.9 only Signed-off-by: Benjamin Herrenschmidt --- Documentation/powerpc/transactional_memory.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index c907be41d60f..84e04a0db0f8 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -155,6 +155,7 @@ These are defined in , and distinguish different reasons why the kernel aborted a transaction: TM_CAUSE_RESCHED Thread was rescheduled. + TM_CAUSE_TLBI Software TLB invalide. TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap. TM_CAUSE_SYSCALL Currently unused; future syscalls that must abort transactions for consistency will use this. From 6ce6c629fd8254b3177650de99699682ff7f6707 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:39 +0000 Subject: [PATCH 267/429] powerpc/tm: Abort on emulation and alignment faults If we are emulating an instruction inside an active user transaction that touches memory, the kernel can't emulate it as it operates in transactional suspend context. We need to abort these transactions and send them back to userspace for the hardware to rollback. We can service these if the user transaction is in suspend mode, since the kernel will operate in the same suspend context. This adds a check to all alignment faults and to specific instruction emulations (only string instructions for now). If the user process is in an active (non-suspended) transaction, we abort the transaction go back to userspace allowing the HW to roll back the transaction and tell the user of the failure. This also adds new tm abort cause codes to report the reason of the persistent error to the user. Crappy test case here http://neuling.org/devel/junkcode/aligntm.c Signed-off-by: Michael Neuling Cc: # v3.9 Signed-off-by: Benjamin Herrenschmidt --- .../powerpc/transactional_memory.txt | 7 +++-- arch/powerpc/include/asm/reg.h | 2 ++ arch/powerpc/kernel/traps.c | 29 +++++++++++++++++++ 3 files changed, 36 insertions(+), 2 deletions(-) diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index 84e04a0db0f8..c54bf3127651 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -161,9 +161,12 @@ kernel aborted a transaction: transactions for consistency will use this. TM_CAUSE_SIGNAL Signal delivered. TM_CAUSE_MISC Currently unused. + TM_CAUSE_ALIGNMENT Alignment fault. + TM_CAUSE_EMULATE Emulation that touched memory. -These can be checked by the user program's abort handler as TEXASR[0:7]. - +These can be checked by the user program's abort handler as TEXASR[0:7]. If +bit 7 is set, it indicates that the error is consider persistent. For example +a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not.q GDB === diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 8f6a94b2dc99..d0528e0d6db8 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -122,6 +122,8 @@ #define TM_CAUSE_SYSCALL 0xd8 /* future use */ #define TM_CAUSE_MISC 0xd6 /* future use */ #define TM_CAUSE_SIGNAL 0xd4 +#define TM_CAUSE_ALIGNMENT 0xd2 +#define TM_CAUSE_EMULATE 0xd0 #if defined(CONFIG_PPC_BOOK3S_64) #define MSR_64BIT MSR_SF diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index a7a648f6b750..f18c79c324ef 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -53,6 +53,7 @@ #ifdef CONFIG_PPC64 #include #include +#include #endif #include #include @@ -932,6 +933,28 @@ static int emulate_isel(struct pt_regs *regs, u32 instword) return 0; } +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +static inline bool tm_abort_check(struct pt_regs *regs, int cause) +{ + /* If we're emulating a load/store in an active transaction, we cannot + * emulate it as the kernel operates in transaction suspended context. + * We need to abort the transaction. This creates a persistent TM + * abort so tell the user what caused it with a new code. + */ + if (MSR_TM_TRANSACTIONAL(regs->msr)) { + tm_enable(); + tm_abort(cause); + return true; + } + return false; +} +#else +static inline bool tm_abort_check(struct pt_regs *regs, int reason) +{ + return false; +} +#endif + static int emulate_instruction(struct pt_regs *regs) { u32 instword; @@ -971,6 +994,9 @@ static int emulate_instruction(struct pt_regs *regs) /* Emulate load/store string insn. */ if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING) { + if (tm_abort_check(regs, + TM_CAUSE_EMULATE | TM_CAUSE_PERSISTENT)) + return -EINVAL; PPC_WARN_EMULATED(string, regs); return emulate_string_inst(regs, instword); } @@ -1148,6 +1174,9 @@ void alignment_exception(struct pt_regs *regs) if (!arch_irq_disabled_regs(regs)) local_irq_enable(); + if (tm_abort_check(regs, TM_CAUSE_ALIGNMENT | TM_CAUSE_PERSISTENT)) + goto bail; + /* we don't implement logging of alignment exceptions */ if (!(current->thread.align_ctl & PR_UNALIGN_SIGBUS)) fixed = fix_alignment(regs); From b75c100ef24894bd2c8b52e123bcc5f191c5d9fd Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:30:56 +0000 Subject: [PATCH 268/429] powerpc/tm: Move TM abort cause codes to uapi These cause codes are usable by userspace, so let's export to uapi. Signed-off-by: Michael Neuling Cc: # v3.9 Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/reg.h | 14 -------------- arch/powerpc/include/asm/tm.h | 2 ++ arch/powerpc/include/uapi/asm/Kbuild | 1 + arch/powerpc/include/uapi/asm/tm.h | 18 ++++++++++++++++++ 4 files changed, 21 insertions(+), 14 deletions(-) create mode 100644 arch/powerpc/include/uapi/asm/tm.h diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index d0528e0d6db8..4a9e408644fe 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -111,20 +111,6 @@ #define MSR_TM_TRANSACTIONAL(x) (((x) & MSR_TS_MASK) == MSR_TS_T) #define MSR_TM_SUSPENDED(x) (((x) & MSR_TS_MASK) == MSR_TS_S) -/* Reason codes describing kernel causes for transaction aborts. By - convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if - the failure is persistent. PAPR saves 0xff-0xe0 for the hypervisor. -*/ -#define TM_CAUSE_PERSISTENT 0x01 -#define TM_CAUSE_RESCHED 0xde -#define TM_CAUSE_TLBI 0xdc -#define TM_CAUSE_FAC_UNAV 0xda -#define TM_CAUSE_SYSCALL 0xd8 /* future use */ -#define TM_CAUSE_MISC 0xd6 /* future use */ -#define TM_CAUSE_SIGNAL 0xd4 -#define TM_CAUSE_ALIGNMENT 0xd2 -#define TM_CAUSE_EMULATE 0xd0 - #if defined(CONFIG_PPC_BOOK3S_64) #define MSR_64BIT MSR_SF diff --git a/arch/powerpc/include/asm/tm.h b/arch/powerpc/include/asm/tm.h index 4b4449abf3f8..9dfbc34bdbf5 100644 --- a/arch/powerpc/include/asm/tm.h +++ b/arch/powerpc/include/asm/tm.h @@ -5,6 +5,8 @@ * Copyright 2012 Matt Evans & Michael Neuling, IBM Corporation. */ +#include + #ifdef CONFIG_PPC_TRANSACTIONAL_MEM extern void do_load_up_transact_fpu(struct thread_struct *thread); extern void do_load_up_transact_altivec(struct thread_struct *thread); diff --git a/arch/powerpc/include/uapi/asm/Kbuild b/arch/powerpc/include/uapi/asm/Kbuild index f7bca6370745..5182c8622b54 100644 --- a/arch/powerpc/include/uapi/asm/Kbuild +++ b/arch/powerpc/include/uapi/asm/Kbuild @@ -40,6 +40,7 @@ header-y += statfs.h header-y += swab.h header-y += termbits.h header-y += termios.h +header-y += tm.h header-y += types.h header-y += ucontext.h header-y += unistd.h diff --git a/arch/powerpc/include/uapi/asm/tm.h b/arch/powerpc/include/uapi/asm/tm.h new file mode 100644 index 000000000000..85059a00f560 --- /dev/null +++ b/arch/powerpc/include/uapi/asm/tm.h @@ -0,0 +1,18 @@ +#ifndef _ASM_POWERPC_TM_H +#define _ASM_POWERPC_TM_H + +/* Reason codes describing kernel causes for transaction aborts. By + * convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if + * the failure is persistent. PAPR saves 0xff-0xe0 for the hypervisor. + */ +#define TM_CAUSE_PERSISTENT 0x01 +#define TM_CAUSE_RESCHED 0xde +#define TM_CAUSE_TLBI 0xdc +#define TM_CAUSE_FAC_UNAV 0xda +#define TM_CAUSE_SYSCALL 0xd8 /* future use */ +#define TM_CAUSE_MISC 0xd6 /* future use */ +#define TM_CAUSE_SIGNAL 0xd4 +#define TM_CAUSE_ALIGNMENT 0xd2 +#define TM_CAUSE_EMULATE 0xd0 + +#endif From 2b3f8e87cf99a33fb6faf5026d7147748bbd77b6 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Sun, 26 May 2013 18:09:41 +0000 Subject: [PATCH 269/429] powerpc/tm: Fix userspace stack corruption on signal delivery for active transactions When in an active transaction that takes a signal, we need to be careful with the stack. It's possible that the stack has moved back up after the tbegin. The obvious case here is when the tbegin is called inside a function that returns before a tend. In this case, the stack is part of the checkpointed transactional memory state. If we write over this non transactionally or in suspend, we are in trouble because if we get a tm abort, the program counter and stack pointer will be back at the tbegin but our in memory stack won't be valid anymore. To avoid this, when taking a signal in an active transaction, we need to use the stack pointer from the checkpointed state, rather than the speculated state. This ensures that the signal context (written tm suspended) will be written below the stack required for the rollback. The transaction is aborted becuase of the treclaim, so any memory written between the tbegin and the signal will be rolled back anyway. For signals taken in non-TM or suspended mode, we use the normal/non-checkpointed stack pointer. Tested with 64 and 32 bit signals Signed-off-by: Michael Neuling Cc: # v3.9 Signed-off-by: Benjamin Herrenschmidt --- .../powerpc/transactional_memory.txt | 19 +++++++++ arch/powerpc/include/asm/processor.h | 13 ++---- arch/powerpc/include/asm/signal.h | 3 ++ arch/powerpc/kernel/signal.c | 40 ++++++++++++++++++- arch/powerpc/kernel/signal.h | 2 +- arch/powerpc/kernel/signal_32.c | 10 +---- arch/powerpc/kernel/signal_64.c | 23 ++++------- 7 files changed, 74 insertions(+), 36 deletions(-) diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt index c54bf3127651..dc23e58ae264 100644 --- a/Documentation/powerpc/transactional_memory.txt +++ b/Documentation/powerpc/transactional_memory.txt @@ -147,6 +147,25 @@ Example signal handler: fix_the_problem(ucp->dar); } +When in an active transaction that takes a signal, we need to be careful with +the stack. It's possible that the stack has moved back up after the tbegin. +The obvious case here is when the tbegin is called inside a function that +returns before a tend. In this case, the stack is part of the checkpointed +transactional memory state. If we write over this non transactionally or in +suspend, we are in trouble because if we get a tm abort, the program counter and +stack pointer will be back at the tbegin but our in memory stack won't be valid +anymore. + +To avoid this, when taking a signal in an active transaction, we need to use +the stack pointer from the checkpointed state, rather than the speculated +state. This ensures that the signal context (written tm suspended) will be +written below the stack required for the rollback. The transaction is aborted +becuase of the treclaim, so any memory written between the tbegin and the +signal will be rolled back anyway. + +For signals taken in non-TM or suspended mode, we use the +normal/non-checkpointed stack pointer. + Failure cause codes used by kernel ================================== diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 594db6bc093c..14a658363698 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -409,21 +409,16 @@ static inline void prefetchw(const void *x) #endif #ifdef CONFIG_PPC64 -static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32) +static inline unsigned long get_clean_sp(unsigned long sp, int is_32) { - unsigned long sp; - if (is_32) - sp = regs->gpr[1] & 0x0ffffffffUL; - else - sp = regs->gpr[1]; - + return sp & 0x0ffffffffUL; return sp; } #else -static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32) +static inline unsigned long get_clean_sp(unsigned long sp, int is_32) { - return regs->gpr[1]; + return sp; } #endif diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h index fbe66c463891..9322c28aebd2 100644 --- a/arch/powerpc/include/asm/signal.h +++ b/arch/powerpc/include/asm/signal.h @@ -3,5 +3,8 @@ #define __ARCH_HAS_SA_RESTORER #include +#include + +extern unsigned long get_tm_stackpointer(struct pt_regs *regs); #endif /* _ASM_POWERPC_SIGNAL_H */ diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 577a8aa69c6e..457e97aa2945 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "signal.h" @@ -30,13 +31,13 @@ int show_unhandled_signals = 1; /* * Allocate space for the signal frame */ -void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, +void __user * get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size, int is_32) { unsigned long oldsp, newsp; /* Default to using normal stack */ - oldsp = get_clean_sp(regs, is_32); + oldsp = get_clean_sp(sp, is_32); /* Check for alt stack */ if ((ka->sa.sa_flags & SA_ONSTACK) && @@ -175,3 +176,38 @@ void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) user_enter(); } + +unsigned long get_tm_stackpointer(struct pt_regs *regs) +{ + /* When in an active transaction that takes a signal, we need to be + * careful with the stack. It's possible that the stack has moved back + * up after the tbegin. The obvious case here is when the tbegin is + * called inside a function that returns before a tend. In this case, + * the stack is part of the checkpointed transactional memory state. + * If we write over this non transactionally or in suspend, we are in + * trouble because if we get a tm abort, the program counter and stack + * pointer will be back at the tbegin but our in memory stack won't be + * valid anymore. + * + * To avoid this, when taking a signal in an active transaction, we + * need to use the stack pointer from the checkpointed state, rather + * than the speculated state. This ensures that the signal context + * (written tm suspended) will be written below the stack required for + * the rollback. The transaction is aborted becuase of the treclaim, + * so any memory written between the tbegin and the signal will be + * rolled back anyway. + * + * For signals taken in non-TM or suspended mode, we use the + * normal/non-checkpointed stack pointer. + */ + +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + if (MSR_TM_ACTIVE(regs->msr)) { + tm_enable(); + tm_reclaim(¤t->thread, regs->msr, TM_CAUSE_SIGNAL); + if (MSR_TM_TRANSACTIONAL(regs->msr)) + return current->thread.ckpt_regs.gpr[1]; + } +#endif + return regs->gpr[1]; +} diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h index ec84c901ceab..c69b9aeb9f23 100644 --- a/arch/powerpc/kernel/signal.h +++ b/arch/powerpc/kernel/signal.h @@ -12,7 +12,7 @@ extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags); -extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, +extern void __user * get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size, int is_32); extern int handle_signal32(unsigned long sig, struct k_sigaction *ka, diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 95068bf569ad..201385c3a1ae 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -503,12 +503,6 @@ static int save_tm_user_regs(struct pt_regs *regs, { unsigned long msr = regs->msr; - /* tm_reclaim rolls back all reg states, updating thread.ckpt_regs, - * thread.transact_fpr[], thread.transact_vr[], etc. - */ - tm_enable(); - tm_reclaim(¤t->thread, msr, TM_CAUSE_SIGNAL); - /* Make sure floating point registers are stored in regs */ flush_fp_to_thread(current); @@ -965,7 +959,7 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka, /* Set up Signal Frame */ /* Put a Real Time Context onto stack */ - rt_sf = get_sigframe(ka, regs, sizeof(*rt_sf), 1); + rt_sf = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*rt_sf), 1); addr = rt_sf; if (unlikely(rt_sf == NULL)) goto badframe; @@ -1403,7 +1397,7 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka, unsigned long tramp; /* Set up Signal Frame */ - frame = get_sigframe(ka, regs, sizeof(*frame), 1); + frame = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*frame), 1); if (unlikely(frame == NULL)) goto badframe; sc = (struct sigcontext __user *) &frame->sctx; diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index c1794286098c..345947367ec0 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -154,11 +154,12 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, * As above, but Transactional Memory is in use, so deliver sigcontexts * containing checkpointed and transactional register states. * - * To do this, we treclaim to gather both sets of registers and set up the - * 'normal' sigcontext registers with rolled-back register values such that a - * simple signal handler sees a correct checkpointed register state. - * If interested, a TM-aware sighandler can examine the transactional registers - * in the 2nd sigcontext to determine the real origin of the signal. + * To do this, we treclaim (done before entering here) to gather both sets of + * registers and set up the 'normal' sigcontext registers with rolled-back + * register values such that a simple signal handler sees a correct + * checkpointed register state. If interested, a TM-aware sighandler can + * examine the transactional registers in the 2nd sigcontext to determine the + * real origin of the signal. */ static long setup_tm_sigcontexts(struct sigcontext __user *sc, struct sigcontext __user *tm_sc, @@ -184,16 +185,6 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc, BUG_ON(!MSR_TM_ACTIVE(regs->msr)); - /* tm_reclaim rolls back all reg states, saving checkpointed (older) - * GPRs to thread.ckpt_regs and (if used) FPRs to (newer) - * thread.transact_fp and/or VRs to (newer) thread.transact_vr. - * THEN we save out FP/VRs, if necessary, to the checkpointed (older) - * thread.fr[]/vr[]s. The transactional (newer) GPRs are on the - * stack, in *regs. - */ - tm_enable(); - tm_reclaim(¤t->thread, msr, TM_CAUSE_SIGNAL); - flush_fp_to_thread(current); #ifdef CONFIG_ALTIVEC @@ -711,7 +702,7 @@ int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info, unsigned long newsp = 0; long err = 0; - frame = get_sigframe(ka, regs, sizeof(*frame), 0); + frame = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*frame), 0); if (unlikely(frame == NULL)) goto badframe; From e242114afff0a41550e174cd787cdbafd34625de Mon Sep 17 00:00:00 2001 From: chenhui zhao Date: Mon, 27 May 2013 21:59:43 +0000 Subject: [PATCH 270/429] powerpc/mpic: Fix irq distribution problem when MPIC_SINGLE_DEST_CPU For the mpic with a flag MPIC_SINGLE_DEST_CPU, only one bit should be set in interrupt destination registers. The code is applicable to 64-bit platforms as well as 32-bit. Signed-off-by: Zhao Chenhui Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mpic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 0a13ecb270c7..3cc2f9159ab1 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -54,7 +54,7 @@ static DEFINE_RAW_SPINLOCK(mpic_lock); #ifdef CONFIG_PPC32 /* XXX for now */ #ifdef CONFIG_IRQ_ALL_CPUS -#define distribute_irqs (!(mpic->flags & MPIC_SINGLE_DEST_CPU)) +#define distribute_irqs (1) #else #define distribute_irqs (0) #endif @@ -1703,7 +1703,7 @@ void mpic_setup_this_cpu(void) * it differently, then we should make sure we also change the default * values of irq_desc[].affinity in irq.c. */ - if (distribute_irqs) { + if (distribute_irqs && !(mpic->flags & MPIC_SINGLE_DEST_CPU)) { for (i = 0; i < mpic->num_sources ; i++) mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) | msk); From 2ac6f427ad837a69561160b282eff80d9f0c2466 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Tue, 28 May 2013 10:39:50 +0000 Subject: [PATCH 271/429] powerpc/cputable: Fix oprofile_cpu_type on power8 Maynard informed me that neither the oprofile kernel module nor oprofile userspace has been updated to support that "legacy" oprofile module interface for power8, which is indicated by "ppc64/power8." This results in no samples. The solution is to default to the "timer" type, instead. The raw entry also should be updated, as "ppc64/ibm-compat-v1" indicates to oprofile userspace to use "compatibility events" which are obsolete in ISA 2.07. Signed-off-by: Nishanth Aravamudan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index c60bbec25c1f..b8808bcb9e4e 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -453,7 +453,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .oprofile_type = PPC_OPROFILE_POWER4, - .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_cpu_type = 0, .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, .platform = "power8", @@ -506,7 +506,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 6, .pmc_type = PPC_PMC_IBM, - .oprofile_cpu_type = "ppc64/power8", + .oprofile_cpu_type = 0, .oprofile_type = PPC_OPROFILE_POWER4, .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, From a515348fc69fd1d9e8ebd34a16f1026d7fe32048 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 29 May 2013 19:34:27 +0000 Subject: [PATCH 272/429] powerpc/pseries: Kill all prefetch streams on context switch On context switch, we should have no prefetch streams leak from one userspace process to another. This frees up prefetch resources for the next process. Based on patch from Milton Miller. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/ppc_asm.h | 11 +++++++++++ arch/powerpc/kernel/entry_64.S | 7 +++++++ 2 files changed, 18 insertions(+) diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index cea8496091ff..2f1b6c5f8174 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -523,6 +523,17 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,946) #define PPC440EP_ERR42 #endif +/* The following stops all load and store data streams associated with stream + * ID (ie. streams created explicitly). The embedded and server mnemonics for + * dcbt are different so we use machine "power4" here explicitly. + */ +#define DCBT_STOP_ALL_STREAM_IDS(scratch) \ +.machine push ; \ +.machine "power4" ; \ + lis scratch,0x60000000@h; \ + dcbt r0,scratch,0b01010; \ +.machine pop + /* * toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them * keep the address intact to be compatible with code shared with diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 0e9095e47b5b..246b11c4fe7e 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -501,6 +501,13 @@ BEGIN_FTR_SECTION ldarx r6,0,r1 END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS) +#ifdef CONFIG_PPC_BOOK3S +/* Cancel all explict user streams as they will have no use after context + * switch and will stop the HW from creating streams itself + */ + DCBT_STOP_ALL_STREAM_IDS(r6) +#endif + addi r6,r4,-THREAD /* Convert THREAD to 'current' */ std r6,PACACURRENT(r13) /* Set new 'current' */ From 280a5ba22ca35575721d42e536176a3561f4ec43 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 29 May 2013 19:34:29 +0000 Subject: [PATCH 273/429] powerpc/pseries: Improve stream generation comments in copypage/user No code changes, just documenting what's happening a little better. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/copypage_power7.S | 19 +++++++++++-------- arch/powerpc/lib/copyuser_power7.S | 12 +++++++----- 2 files changed, 18 insertions(+), 13 deletions(-) diff --git a/arch/powerpc/lib/copypage_power7.S b/arch/powerpc/lib/copypage_power7.S index 0ef75bf0695c..395c594722a2 100644 --- a/arch/powerpc/lib/copypage_power7.S +++ b/arch/powerpc/lib/copypage_power7.S @@ -28,13 +28,14 @@ _GLOBAL(copypage_power7) * aligned we don't need to clear the bottom 7 bits of either * address. */ - ori r9,r3,1 /* stream=1 */ + ori r9,r3,1 /* stream=1 => to */ #ifdef CONFIG_PPC_64K_PAGES - lis r7,0x0E01 /* depth=7, units=512 */ + lis r7,0x0E01 /* depth=7 + * units/cachelines=512 */ #else lis r7,0x0E00 /* depth=7 */ - ori r7,r7,0x1000 /* units=32 */ + ori r7,r7,0x1000 /* units/cachelines=32 */ #endif ori r10,r7,1 /* stream=1 */ @@ -43,12 +44,14 @@ _GLOBAL(copypage_power7) .machine push .machine "power4" - dcbt r0,r4,0b01000 - dcbt r0,r7,0b01010 - dcbtst r0,r9,0b01000 - dcbtst r0,r10,0b01010 + /* setup read stream 0 */ + dcbt r0,r4,0b01000 /* addr from */ + dcbt r0,r7,0b01010 /* length and depth from */ + /* setup write stream 1 */ + dcbtst r0,r9,0b01000 /* addr to */ + dcbtst r0,r10,0b01010 /* length and depth to */ eieio - dcbt r0,r8,0b01010 /* GO */ + dcbt r0,r8,0b01010 /* all streams GO */ .machine pop #ifdef CONFIG_ALTIVEC diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index 0d24ff15f5f6..d1f11795a7ad 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -318,12 +318,14 @@ err1; stb r0,0(r3) .machine push .machine "power4" - dcbt r0,r6,0b01000 - dcbt r0,r7,0b01010 - dcbtst r0,r9,0b01000 - dcbtst r0,r10,0b01010 + /* setup read stream 0 */ + dcbt r0,r6,0b01000 /* addr from */ + dcbt r0,r7,0b01010 /* length and depth from */ + /* setup write stream 1 */ + dcbtst r0,r9,0b01000 /* addr to */ + dcbtst r0,r10,0b01010 /* length and depth to */ eieio - dcbt r0,r8,0b01010 /* GO */ + dcbt r0,r8,0b01010 /* all streams GO */ .machine pop beq cr1,.Lunwind_stack_nonvmx_copy From 0608d692463598c1d6e826d9dd7283381b4f246c Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Fri, 31 May 2013 01:03:24 +0000 Subject: [PATCH 274/429] powerpc/mm: Always invalidate tlb on hpte invalidate and update If a hash bucket gets full, we "evict" a more/less random entry from it. When we do that we don't invalidate the TLB (hpte_remove) because we assume the old translation is still technically "valid". This implies that when we are invalidating or updating pte, even if HPTE entry is not valid we should do a tlb invalidate. This was a regression introduced by b1022fbd293564de91596b8775340cf41ad5214c Signed-off-by: Aneesh Kumar K.V Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/hash_native_64.c | 30 ++++++++++++++++++++++-------- 1 file changed, 22 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index 6a2aead5b0e5..4c122c3f1623 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -336,11 +336,18 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp, hpte_v = hptep->v; actual_psize = hpte_actual_psize(hptep, psize); + /* + * We need to invalidate the TLB always because hpte_remove doesn't do + * a tlb invalidate. If a hash bucket gets full, we "evict" a more/less + * random entry from it. When we do that we don't invalidate the TLB + * (hpte_remove) because we assume the old translation is still + * technically "valid". + */ if (actual_psize < 0) { - native_unlock_hpte(hptep); - return -1; + actual_psize = psize; + ret = -1; + goto err_out; } - /* Even if we miss, we need to invalidate the TLB */ if (!HPTE_V_COMPARE(hpte_v, want_v)) { DBG_LOW(" -> miss\n"); ret = -1; @@ -350,6 +357,7 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp, hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) | (newpp & (HPTE_R_PP | HPTE_R_N | HPTE_R_C)); } +err_out: native_unlock_hpte(hptep); /* Ensure it is out of the tlb too. */ @@ -409,7 +417,7 @@ static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea, hptep = htab_address + slot; actual_psize = hpte_actual_psize(hptep, psize); if (actual_psize < 0) - return; + actual_psize = psize; /* Update the HPTE */ hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) | @@ -437,21 +445,27 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long vpn, hpte_v = hptep->v; actual_psize = hpte_actual_psize(hptep, psize); + /* + * We need to invalidate the TLB always because hpte_remove doesn't do + * a tlb invalidate. If a hash bucket gets full, we "evict" a more/less + * random entry from it. When we do that we don't invalidate the TLB + * (hpte_remove) because we assume the old translation is still + * technically "valid". + */ if (actual_psize < 0) { + actual_psize = psize; native_unlock_hpte(hptep); - local_irq_restore(flags); - return; + goto err_out; } - /* Even if we miss, we need to invalidate the TLB */ if (!HPTE_V_COMPARE(hpte_v, want_v)) native_unlock_hpte(hptep); else /* Invalidate the hpte. NOTE: this also unlocks it */ hptep->v = 0; +err_out: /* Invalidate the TLB */ tlbie(vpn, psize, actual_psize, ssize, local); - local_irq_restore(flags); } From f7b3367774f92a688d39ed767f0ae9b93af7873a Mon Sep 17 00:00:00 2001 From: Priyanka Jain Date: Fri, 31 May 2013 01:20:02 +0000 Subject: [PATCH 275/429] powerpc/32bit:Store temporary result in r0 instead of r8 Commit a9c4e541ea9b22944da356f2a9258b4eddcc953b "powerpc/kprobe: Complete kprobe and migrate exception frame" introduced a regression: While returning from exception handling in case of PREEMPT enabled, _TIF_NEED_RESCHED bit is checked in TI_FLAGS (thread_info flag) of current task. Only if this bit is set, it should continue with the process of calling preempt_schedule_irq() to schedule highest priority task if available. Current code assumes that r8 contains TI_FLAGS and check this for _TIF_NEED_RESCHED, but as r8 is modified in the code which executes before this check, r8 no longer contains the expected TI_FLAGS information. As a result check for comparison with _TIF_NEED_RESCHED was failing even if NEED_RESCHED bit is set in the current thread_info flag. Due to this, preempt_schedule_irq() and in turn scheduler was not getting called even if highest priority task is ready for execution. So, store temporary results in r0 instead of r8 to prevent r8 from getting modified as subsequent code is dependent on its value. Signed-off-by: Priyanka Jain CC: [v3.7+] Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index d22e73e4618b..22b45a4955cd 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -849,7 +849,7 @@ resume_kernel: /* check current_thread_info, _TIF_EMULATE_STACK_STORE */ CURRENT_THREAD_INFO(r9, r1) lwz r8,TI_FLAGS(r9) - andis. r8,r8,_TIF_EMULATE_STACK_STORE@h + andis. r0,r8,_TIF_EMULATE_STACK_STORE@h beq+ 1f addi r8,r1,INT_FRAME_SIZE /* Get the kprobed function entry */ From 8e44ddc3f34d22c55f2977ac8b160609935d37ca Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 23 May 2013 15:42:21 +0000 Subject: [PATCH 276/429] powerpc/kvm/book3s: Add support for H_IPOLL and H_XIRR_X in XICS emulation This adds the remaining two hypercalls defined by PAPR for manipulating the XICS interrupt controller, H_IPOLL and H_XIRR_X. H_IPOLL returns information about the priority and pending interrupts for a virtual cpu, without changing any state. H_XIRR_X is like H_XIRR in that it reads and acknowledges the highest-priority pending interrupt, but it also returns the timestamp (timebase register value) from when the interrupt was first received by the hypervisor. Currently we just return the current time, since we don't do any software queueing of virtual interrupts inside the XICS emulation code. These hcalls are not currently used by Linux guests, but may be in future. Signed-off-by: Paul Mackerras Acked-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/hvcall.h | 1 + arch/powerpc/kvm/book3s_hv.c | 2 ++ arch/powerpc/kvm/book3s_pr_papr.c | 2 ++ arch/powerpc/kvm/book3s_xics.c | 29 +++++++++++++++++++++++++++++ 4 files changed, 34 insertions(+) diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index cf4df8e2139a..0c7f2bfcf134 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -264,6 +264,7 @@ #define H_GET_MPP 0x2D4 #define H_HOME_NODE_ASSOCIATIVITY 0x2EC #define H_BEST_ENERGY 0x2F4 +#define H_XIRR_X 0x2FC #define H_RANDOM 0x300 #define H_COP 0x304 #define H_GET_MPP_X 0x314 diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 9de24f8e03c7..550f5928b394 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -562,6 +562,8 @@ int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu) case H_CPPR: case H_EOI: case H_IPI: + case H_IPOLL: + case H_XIRR_X: if (kvmppc_xics_enabled(vcpu)) { ret = kvmppc_xics_hcall(vcpu, req); break; diff --git a/arch/powerpc/kvm/book3s_pr_papr.c b/arch/powerpc/kvm/book3s_pr_papr.c index b24309c6c2d5..da0e0bc268bd 100644 --- a/arch/powerpc/kvm/book3s_pr_papr.c +++ b/arch/powerpc/kvm/book3s_pr_papr.c @@ -257,6 +257,8 @@ int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd) case H_CPPR: case H_EOI: case H_IPI: + case H_IPOLL: + case H_XIRR_X: if (kvmppc_xics_enabled(vcpu)) return kvmppc_h_pr_xics_hcall(vcpu, cmd); break; diff --git a/arch/powerpc/kvm/book3s_xics.c b/arch/powerpc/kvm/book3s_xics.c index f7a103756618..94c1dd46b83d 100644 --- a/arch/powerpc/kvm/book3s_xics.c +++ b/arch/powerpc/kvm/book3s_xics.c @@ -650,6 +650,23 @@ static noinline int kvmppc_h_ipi(struct kvm_vcpu *vcpu, unsigned long server, return H_SUCCESS; } +static int kvmppc_h_ipoll(struct kvm_vcpu *vcpu, unsigned long server) +{ + union kvmppc_icp_state state; + struct kvmppc_icp *icp; + + icp = vcpu->arch.icp; + if (icp->server_num != server) { + icp = kvmppc_xics_find_server(vcpu->kvm, server); + if (!icp) + return H_PARAMETER; + } + state = ACCESS_ONCE(icp->state); + kvmppc_set_gpr(vcpu, 4, ((u32)state.cppr << 24) | state.xisr); + kvmppc_set_gpr(vcpu, 5, state.mfrr); + return H_SUCCESS; +} + static noinline void kvmppc_h_cppr(struct kvm_vcpu *vcpu, unsigned long cppr) { union kvmppc_icp_state old_state, new_state; @@ -787,6 +804,18 @@ int kvmppc_xics_hcall(struct kvm_vcpu *vcpu, u32 req) if (!xics || !vcpu->arch.icp) return H_HARDWARE; + /* These requests don't have real-mode implementations at present */ + switch (req) { + case H_XIRR_X: + res = kvmppc_h_xirr(vcpu); + kvmppc_set_gpr(vcpu, 4, res); + kvmppc_set_gpr(vcpu, 5, get_tb()); + return rc; + case H_IPOLL: + rc = kvmppc_h_ipoll(vcpu, kvmppc_get_gpr(vcpu, 4)); + return rc; + } + /* Check for real mode returning too hard */ if (xics->real_mode) return kvmppc_xics_rm_complete(vcpu, req); From f274ef8747d3be649bba8708696fb31cb00fa75a Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Tue, 21 May 2013 09:32:48 +0000 Subject: [PATCH 277/429] powerpc/pseries: Always enable CONFIG_HOTPLUG_CPU on PSERIES SMP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adam Lackorzynski reported the following build failure on !CONFIG_HOTPLUG_CPU configuration: CC arch/powerpc/kernel/rtas.o arch/powerpc/kernel/rtas.c: In function ‘rtas_cpu_state_change_mask’: arch/powerpc/kernel/rtas.c:843:4: error: implicit declaration of function ‘cpu_down’ [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors make[1]: *** [arch/powerpc/kernel/rtas.o] Error 1 make: *** [arch/powerpc/kernel] Error 2 The build fails because cpu_down() is defined only under CONFIG_HOTPLUG_CPU. Looking further, the mobility code in pseries is one of the call-sites which uses rtas_ibm_suspend_me(), which in turn calls rtas_cpu_state_change_mask(). And the mobility code is unconditionally compiled-in (it does not fall under any Kconfig option). And commit 120496ac (powerpc: Bring all threads online prior to migration/hibernation) which introduced this build regression is critical for the proper functioning of the migration code. So it appears that the only solution to this problem is to enable CONFIG_HOTPLUG_CPU if SMP is enabled on PPC_PSERIES platforms. So make that change in the Kconfig. Reported-by: Adam Lackorzynski Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/Kconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index 023b288f895b..4459eff7a75a 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -19,6 +19,8 @@ config PPC_PSERIES select ZLIB_DEFLATE select PPC_DOORBELL select HAVE_CONTEXT_TRACKING + select HOTPLUG if SMP + select HOTPLUG_CPU if SMP default y config PPC_SPLPAR From 279838960484fa22d903086eea743a6b6700647d Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Thu, 16 May 2013 20:58:41 +0000 Subject: [PATCH 278/429] powerpc/pci: Remove the stale comments of pci_process_bridge_OF_ranges These comments already don't apply to the current code. So just remove them. Signed-off-by: Kevin Hao Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci-common.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index e9acf50dd5b2..8acd7c970830 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -657,15 +657,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar, * ranges. However, some machines (thanks Apple !) tend to split their * space into lots of small contiguous ranges. So we have to coalesce. * - * - We can only cope with all memory ranges having the same offset - * between CPU addresses and PCI addresses. Unfortunately, some bridges - * are setup for a large 1:1 mapping along with a small "window" which - * maps PCI address 0 to some arbitrary high address of the CPU space in - * order to give access to the ISA memory hole. - * The way out of here that I've chosen for now is to always set the - * offset based on the first resource found, then override it if we - * have a different offset and the previous was set by an ISA hole. - * * - Some busses have IO space not starting at 0, which causes trouble with * the way we do our IO resource renumbering. The code somewhat deals with * it for 64 bits but I would expect problems on 32 bits. From 858957ab1e3a7ee29ed40309bdf0f1b7bcf5bf30 Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Thu, 16 May 2013 20:58:42 +0000 Subject: [PATCH 279/429] powerpc/pci: Remove the unused variables in pci_process_bridge_OF_ranges The codes which ever used these two variables have gone. Throw away them too. Signed-off-by: Kevin Hao Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci-common.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 8acd7c970830..7f2273cc3c7d 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -671,10 +671,9 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose, int rlen; int pna = of_n_addr_cells(dev); int np = pna + 5; - int memno = 0, isa_hole = -1; + int memno = 0; u32 pci_space; unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size; - unsigned long long isa_mb = 0; struct resource *res; printk(KERN_INFO "PCI host bridge %s %s ranges:\n", @@ -768,8 +767,6 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose, } /* Handles ISA memory hole space here */ if (pci_addr == 0) { - isa_mb = cpu_addr; - isa_hole = memno; if (primary || isa_mem_base == 0) isa_mem_base = cpu_addr; hose->isa_mem_phys = cpu_addr; From cbda6aa10bd2d97e38f4d26a03a0b2183ad580ba Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 15 May 2013 20:19:30 +0000 Subject: [PATCH 280/429] powerpc/perf: Revert to original NO_SIPR logic This is a revert and then some of commit 860aad7 "Add regs_no_sipr()". This workaround was only needed on early chip versions. As before NO_SIPR becomes a static flag of the PMU struct. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 30 ++++++------------------------ 1 file changed, 6 insertions(+), 24 deletions(-) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 426180b84978..b2f873bc891b 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -110,7 +110,7 @@ static inline void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) {} static bool regs_use_siar(struct pt_regs *regs) { - return !!(regs->result & 1); + return !!regs->result; } /* @@ -181,11 +181,6 @@ static bool regs_sipr(struct pt_regs *regs) return !!(regs->dsisr & sipr); } -static bool regs_no_sipr(struct pt_regs *regs) -{ - return !!(regs->result & 2); -} - static inline u32 perf_flags_from_msr(struct pt_regs *regs) { if (regs->msr & MSR_PR) @@ -208,7 +203,7 @@ static inline u32 perf_get_misc_flags(struct pt_regs *regs) * SIAR which should give slightly more reliable * results */ - if (regs_no_sipr(regs)) { + if (ppmu->flags & PPMU_NO_SIPR) { unsigned long siar = mfspr(SPRN_SIAR); if (siar >= PAGE_OFFSET) return PERF_RECORD_MISC_KERNEL; @@ -239,22 +234,9 @@ static inline void perf_read_regs(struct pt_regs *regs) int use_siar; regs->dsisr = mmcra; - regs->result = 0; - - if (ppmu->flags & PPMU_NO_SIPR) - regs->result |= 2; - - /* - * On power8 if we're in random sampling mode, the SIER is updated. - * If we're in continuous sampling mode, we don't have SIPR. - */ - if (ppmu->flags & PPMU_HAS_SIER) { - if (marked) - regs->dar = mfspr(SPRN_SIER); - else - regs->result |= 2; - } + if (ppmu->flags & PPMU_HAS_SIER) + regs->dar = mfspr(SPRN_SIER); /* * If this isn't a PMU exception (eg a software event) the SIAR is @@ -279,12 +261,12 @@ static inline void perf_read_regs(struct pt_regs *regs) use_siar = 1; else if ((ppmu->flags & PPMU_NO_CONT_SAMPLING)) use_siar = 0; - else if (!regs_no_sipr(regs) && regs_sipr(regs)) + else if (!(ppmu->flags & PPMU_NO_SIPR) && regs_sipr(regs)) use_siar = 0; else use_siar = 1; - regs->result |= use_siar; + regs->result = use_siar; } /* From 58a032c3b106adcd2b83b7e631de3b79f238cdd2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 15 May 2013 20:19:31 +0000 Subject: [PATCH 281/429] powerpc/perf: Add missing SIER support Commit 8f61aa3 "Add support for SIER" missed updates to siar_valid() and perf_get_data_addr(). In both cases we need to check the SIER instead of mmcra. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 37 ++++++++++++++++++++++----------- 1 file changed, 25 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index b2f873bc891b..845c867444e6 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -136,22 +136,30 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs) * If we're not doing instruction sampling, give them the SDAR * (sampled data address). If we are doing instruction sampling, then * only give them the SDAR if it corresponds to the instruction - * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC or - * the [POWER7P_]MMCRA_SDAR_VALID bit in MMCRA. + * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC, the + * [POWER7P_]MMCRA_SDAR_VALID bit in MMCRA, or the SDAR_VALID bit in SIER. */ static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { unsigned long mmcra = regs->dsisr; - unsigned long sdsync; + bool sdar_valid; - if (ppmu->flags & PPMU_SIAR_VALID) - sdsync = POWER7P_MMCRA_SDAR_VALID; - else if (ppmu->flags & PPMU_ALT_SIPR) - sdsync = POWER6_MMCRA_SDSYNC; - else - sdsync = MMCRA_SDSYNC; + if (ppmu->flags & PPMU_HAS_SIER) + sdar_valid = regs->dar & SIER_SDAR_VALID; + else { + unsigned long sdsync; - if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync)) + if (ppmu->flags & PPMU_SIAR_VALID) + sdsync = POWER7P_MMCRA_SDAR_VALID; + else if (ppmu->flags & PPMU_ALT_SIPR) + sdsync = POWER6_MMCRA_SDSYNC; + else + sdsync = MMCRA_SDSYNC; + + sdar_valid = mmcra & sdsync; + } + + if (!(mmcra & MMCRA_SAMPLE_ENABLE) || sdar_valid) *addrp = mfspr(SPRN_SDAR); } @@ -290,8 +298,13 @@ static inline int siar_valid(struct pt_regs *regs) unsigned long mmcra = regs->dsisr; int marked = mmcra & MMCRA_SAMPLE_ENABLE; - if ((ppmu->flags & PPMU_SIAR_VALID) && marked) - return mmcra & POWER7P_MMCRA_SIAR_VALID; + if (marked) { + if (ppmu->flags & PPMU_HAS_SIER) + return regs->dar & SIER_SIAR_VALID; + + if (ppmu->flags & PPMU_SIAR_VALID) + return mmcra & POWER7P_MMCRA_SIAR_VALID; + } return 1; } From fda3f402f446e82204266f4a3bf26912f2d55e75 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Fri, 31 May 2013 05:37:57 +0000 Subject: [PATCH 282/429] snmp6: remove IPSTATS_MIB_CSUMERRORS This stat is not relevant in IPv6, there is no checksum in IPv6 header. Just leave a comment to explain the hole. Signed-off-by: Nicolas Dichtel Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv6/proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/proc.c b/net/ipv6/proc.c index f3c1ff4357ff..51c3285b5d9b 100644 --- a/net/ipv6/proc.c +++ b/net/ipv6/proc.c @@ -90,7 +90,7 @@ static const struct snmp_mib snmp6_ipstats_list[] = { SNMP_MIB_ITEM("Ip6OutMcastOctets", IPSTATS_MIB_OUTMCASTOCTETS), SNMP_MIB_ITEM("Ip6InBcastOctets", IPSTATS_MIB_INBCASTOCTETS), SNMP_MIB_ITEM("Ip6OutBcastOctets", IPSTATS_MIB_OUTBCASTOCTETS), - SNMP_MIB_ITEM("InCsumErrors", IPSTATS_MIB_CSUMERRORS), + /* IPSTATS_MIB_CSUMERRORS is not relevant in IPv6 (no checksum) */ SNMP_MIB_SENTINEL }; From badec11b645e21acbc2411d7759e3efa559af443 Mon Sep 17 00:00:00 2001 From: Will Schmidt Date: Mon, 20 May 2013 05:04:18 +0000 Subject: [PATCH 283/429] powerpc/cputable: Fix typo on P7+ cputable entry Fix a typo in setting COMMON_USER2_POWER7 bits to .cpu_user_features2 cpu specs table. Signed-off-by: Will Schmidt Acked-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index b8808bcb9e4e..1f0937d7d4b5 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -482,7 +482,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_name = "POWER7+ (raw)", .cpu_features = CPU_FTRS_POWER7, .cpu_user_features = COMMON_USER_POWER7, - .cpu_user_features = COMMON_USER2_POWER7, + .cpu_user_features2 = COMMON_USER2_POWER7, .mmu_features = MMU_FTRS_POWER7, .icache_bsize = 128, .dcache_bsize = 128, From 9747ba6636be8a7e8ba83a1fb231d061ca318e4f Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Fri, 31 May 2013 11:57:26 +0000 Subject: [PATCH 284/429] net/core: __hw_addr_create_ex does not initialize sync_cnt The sync_cnt field is not being initialized, which can result in arbitrary values in the field. Fixed by initializing it to zero. Signed-off-by: Jay Vosburgh Reviewed-by: Vlad Yasevich Tested-by: Shawn Bohrer Signed-off-by: David S. Miller --- net/core/dev_addr_lists.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index c013f38482a1..1f919d979db3 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -39,6 +39,7 @@ static int __hw_addr_create_ex(struct netdev_hw_addr_list *list, ha->refcount = 1; ha->global_use = global; ha->synced = sync; + ha->sync_cnt = 0; list_add_tail_rcu(&ha->list, &list->list); list->count++; From 60ba834c2fb65f2fafee47e03c258fac579d0591 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Fri, 31 May 2013 11:57:27 +0000 Subject: [PATCH 285/429] net/core: __hw_addr_unsync_one "from" address not marked synced When an address is added to a subordinate interface (the "to" list), the address entry in the "from" list is not marked "synced" as the entry added to the "to" list is. When performing the unsync operation (e.g., dev_mc_unsync), __hw_addr_unsync_one calls __hw_addr_del_entry with the "synced" parameter set to true for the case when the address reference is being released from the "from" list. This causes a test inside to fail, with the result being that the reference count on the "from" address is not properly decremeted and the address on the "from" list will never be freed. Correct this by having __hw_addr_unsync_one call the __hw_addr_del_entry function with the "sync" flag set to false for the "remove from the from list" case. Signed-off-by: Jay Vosburgh Reviewed-by: Vlad Yasevich Tested-by: Shawn Bohrer Signed-off-by: David S. Miller --- net/core/dev_addr_lists.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index 1f919d979db3..c858e81e6423 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -160,7 +160,8 @@ static void __hw_addr_unsync_one(struct netdev_hw_addr_list *to_list, if (err) return; ha->sync_cnt--; - __hw_addr_del_entry(from_list, ha, false, true); + /* address on from list is not marked synced */ + __hw_addr_del_entry(from_list, ha, false, false); } static int __hw_addr_sync_multiple(struct netdev_hw_addr_list *to_list, From 29ca2f8fcc721517b83d0a560c47cee2dde827a6 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Fri, 31 May 2013 11:57:28 +0000 Subject: [PATCH 286/429] net/core: __hw_addr_sync_one / _multiple broken Currently, __hw_addr_sync_one is called in a loop by __hw_addr_sync_multiple to sync each of a "from" device's hw addresses to a "to" device. __hw_addr_sync_one calls __hw_addr_add_ex to attempt to add each address. __hw_addr_add_ex is called with global=false, and sync=true. __hw_addr_add_ex checks to see if the new address matches an address already on the list. If so, it tests global and sync. In this case, sync=true, and it then checks if the address is already synced, and if so, returns 0. This 0 return causes __hw_addr_sync_one to increment the sync_cnt and refcount for the "from" list's address entry, even though the address is already synced and has a reference and sync_cnt. This will cause the sync_cnt and refcount to increment without bound every time an addresses is added to the "from" device and synced to the "to" device. The fix here has two parts: First, when __hw_addr_add_ex finds the address already exists and is synced, return -EEXIST instead of 0. Second, __hw_addr_sync_one checks the error return for -EEXIST, and if so, it (a) does not add a refcount/sync_cnt, and (b) returns 0 itself so that __hw_addr_sync_multiple will not return an error. Signed-off-by: Jay Vosburgh Reviewed-by: Vlad Yasevich Tested-by: Shawn Bohrer Signed-off-by: David S. Miller --- net/core/dev_addr_lists.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index c858e81e6423..8e2c2ef8053d 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -67,7 +67,7 @@ static int __hw_addr_add_ex(struct netdev_hw_addr_list *list, } if (sync) { if (ha->synced) - return 0; + return -EEXIST; else ha->synced = true; } @@ -140,10 +140,13 @@ static int __hw_addr_sync_one(struct netdev_hw_addr_list *to_list, err = __hw_addr_add_ex(to_list, ha->addr, addr_len, ha->type, false, true); - if (err) + if (err && err != -EEXIST) return err; - ha->sync_cnt++; - ha->refcount++; + + if (!err) { + ha->sync_cnt++; + ha->refcount++; + } return 0; } From b190a50875b95e58ebe2b00ed3bf7f1d44961471 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Fri, 31 May 2013 11:57:29 +0000 Subject: [PATCH 287/429] net/core: dev_mc_sync_multiple calls wrong helper The dev_mc_sync_multiple function is currently calling __hw_addr_sync, and not __hw_addr_sync_multiple. This will result in addresses only being synced to the first device from the set. Corrected by calling the _multiple variant. Signed-off-by: Jay Vosburgh Reviewed-by: Vlad Yasevich Tested-by: Shawn Bohrer Signed-off-by: David S. Miller --- net/core/dev_addr_lists.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/dev_addr_lists.c b/net/core/dev_addr_lists.c index 8e2c2ef8053d..6cda4e2c2132 100644 --- a/net/core/dev_addr_lists.c +++ b/net/core/dev_addr_lists.c @@ -801,7 +801,7 @@ int dev_mc_sync_multiple(struct net_device *to, struct net_device *from) return -EINVAL; netif_addr_lock_nested(to); - err = __hw_addr_sync(&to->mc, &from->mc, to->addr_len); + err = __hw_addr_sync_multiple(&to->mc, &from->mc, to->addr_len); if (!err) __dev_set_rx_mode(to); netif_addr_unlock(to); From 1e2bd517c108816220f262d7954b697af03b5f9c Mon Sep 17 00:00:00 2001 From: Pravin B Shelar Date: Thu, 30 May 2013 06:45:27 +0000 Subject: [PATCH 288/429] udp6: Fix udp fragmentation for tunnel traffic. udp6 over GRE tunnel does not work after to GRE tso changes. GRE tso handler passes inner packet but keeps track of outer header start in SKB_GSO_CB(skb)->mac_offset. udp6 fragment need to take care of outer header, which start at the mac_offset, while adding fragment header. This bug is introduced by commit 68c3316311 (GRE: Add TCP segmentation offload for GRE). Reported-by: Dmitry Kravkov Signed-off-by: Pravin B Shelar Tested-by: Dmitry Kravkov Signed-off-by: David S. Miller --- include/linux/skbuff.h | 15 +++++++++++++++ net/ipv6/udp_offload.c | 20 ++++++++++++-------- 2 files changed, 27 insertions(+), 8 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 2e0ced1af3b1..9c676eae3968 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -2852,6 +2852,21 @@ static inline int skb_tnl_header_len(const struct sk_buff *inner_skb) SKB_GSO_CB(inner_skb)->mac_offset; } +static inline int gso_pskb_expand_head(struct sk_buff *skb, int extra) +{ + int new_headroom, headroom; + int ret; + + headroom = skb_headroom(skb); + ret = pskb_expand_head(skb, extra, 0, GFP_ATOMIC); + if (ret) + return ret; + + new_headroom = skb_headroom(skb); + SKB_GSO_CB(skb)->mac_offset += (new_headroom - headroom); + return 0; +} + static inline bool skb_is_gso(const struct sk_buff *skb) { return skb_shinfo(skb)->gso_size; diff --git a/net/ipv6/udp_offload.c b/net/ipv6/udp_offload.c index 3bb3a891a424..d3cfaf9c7a08 100644 --- a/net/ipv6/udp_offload.c +++ b/net/ipv6/udp_offload.c @@ -46,11 +46,12 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, unsigned int mss; unsigned int unfrag_ip6hlen, unfrag_len; struct frag_hdr *fptr; - u8 *mac_start, *prevhdr; + u8 *packet_start, *prevhdr; u8 nexthdr; u8 frag_hdr_sz = sizeof(struct frag_hdr); int offset; __wsum csum; + int tnl_hlen; mss = skb_shinfo(skb)->gso_size; if (unlikely(skb->len <= mss)) @@ -83,9 +84,11 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, skb->ip_summed = CHECKSUM_NONE; /* Check if there is enough headroom to insert fragment header. */ - if ((skb_mac_header(skb) < skb->head + frag_hdr_sz) && - pskb_expand_head(skb, frag_hdr_sz, 0, GFP_ATOMIC)) - goto out; + tnl_hlen = skb_tnl_header_len(skb); + if (skb_headroom(skb) < (tnl_hlen + frag_hdr_sz)) { + if (gso_pskb_expand_head(skb, tnl_hlen + frag_hdr_sz)) + goto out; + } /* Find the unfragmentable header and shift it left by frag_hdr_sz * bytes to insert fragment header. @@ -93,11 +96,12 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb, unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr); nexthdr = *prevhdr; *prevhdr = NEXTHDR_FRAGMENT; - unfrag_len = skb_network_header(skb) - skb_mac_header(skb) + - unfrag_ip6hlen; - mac_start = skb_mac_header(skb); - memmove(mac_start-frag_hdr_sz, mac_start, unfrag_len); + unfrag_len = (skb_network_header(skb) - skb_mac_header(skb)) + + unfrag_ip6hlen + tnl_hlen; + packet_start = (u8 *) skb->head + SKB_GSO_CB(skb)->mac_offset; + memmove(packet_start-frag_hdr_sz, packet_start, unfrag_len); + SKB_GSO_CB(skb)->mac_offset -= frag_hdr_sz; skb->mac_header -= frag_hdr_sz; skb->network_header -= frag_hdr_sz; From e4c1721642bbd42d8142f4811cde0588c28db51d Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 29 May 2013 07:36:25 +0000 Subject: [PATCH 289/429] xfrm: force a garbage collection after deleting a policy In some cases after deleting a policy from the SPD the policy would remain in the dst/flow/route cache for an extended period of time which caused problems for SELinux as its dynamic network access controls key off of the number of XFRM policy and state entries. This patch corrects this problem by forcing a XFRM garbage collection whenever a policy is sucessfully removed. Reported-by: Ondrej Moris Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- include/net/xfrm.h | 5 +++++ net/key/af_key.c | 4 ++++ net/xfrm/xfrm_policy.c | 3 ++- net/xfrm/xfrm_user.c | 2 ++ 4 files changed, 13 insertions(+), 1 deletion(-) diff --git a/include/net/xfrm.h b/include/net/xfrm.h index ae16531d0d35..94ce082b29dc 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1160,6 +1160,8 @@ static inline void xfrm_sk_free_policy(struct sock *sk) } } +extern void xfrm_garbage_collect(struct net *net); + #else static inline void xfrm_sk_free_policy(struct sock *sk) {} @@ -1194,6 +1196,9 @@ static inline int xfrm6_policy_check_reverse(struct sock *sk, int dir, { return 1; } +static inline void xfrm_garbage_collect(struct net *net) +{ +} #endif static __inline__ diff --git a/net/key/af_key.c b/net/key/af_key.c index 5b1e5af25713..c5fbd7589681 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -2366,6 +2366,8 @@ static int pfkey_spddelete(struct sock *sk, struct sk_buff *skb, const struct sa out: xfrm_pol_put(xp); + if (err == 0) + xfrm_garbage_collect(net); return err; } @@ -2615,6 +2617,8 @@ static int pfkey_spdget(struct sock *sk, struct sk_buff *skb, const struct sadb_ out: xfrm_pol_put(xp); + if (delete && err == 0) + xfrm_garbage_collect(net); return err; } diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 23cea0f74336..ea970b8002a2 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -2557,11 +2557,12 @@ static void __xfrm_garbage_collect(struct net *net) } } -static void xfrm_garbage_collect(struct net *net) +void xfrm_garbage_collect(struct net *net) { flow_cache_flush(); __xfrm_garbage_collect(net); } +EXPORT_SYMBOL(xfrm_garbage_collect); static void xfrm_garbage_collect_deferred(struct net *net) { diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index aa778748c565..3f565e495ac6 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1681,6 +1681,8 @@ static int xfrm_get_policy(struct sk_buff *skb, struct nlmsghdr *nlh, out: xfrm_pol_put(xp); + if (delete && err == 0) + xfrm_garbage_collect(net); return err; } From e4e8536f65b51ce91c30588b0925872bdfc60d03 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 29 May 2013 07:36:32 +0000 Subject: [PATCH 290/429] selinux: fix the labeled xfrm/IPsec reference count handling The SELinux labeled IPsec code was improperly handling its reference counting, dropping a reference on a delete operation instead of on a free/release operation. Reported-by: Ondrej Moris Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- security/selinux/xfrm.c | 34 ++++++++++++++-------------------- 1 file changed, 14 insertions(+), 20 deletions(-) diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c index 8ab295154517..d03081886214 100644 --- a/security/selinux/xfrm.c +++ b/security/selinux/xfrm.c @@ -316,6 +316,7 @@ int selinux_xfrm_policy_clone(struct xfrm_sec_ctx *old_ctx, memcpy(new_ctx, old_ctx, sizeof(*new_ctx)); memcpy(new_ctx->ctx_str, old_ctx->ctx_str, new_ctx->ctx_len); + atomic_inc(&selinux_xfrm_refcount); *new_ctxp = new_ctx; } return 0; @@ -326,6 +327,7 @@ int selinux_xfrm_policy_clone(struct xfrm_sec_ctx *old_ctx, */ void selinux_xfrm_policy_free(struct xfrm_sec_ctx *ctx) { + atomic_dec(&selinux_xfrm_refcount); kfree(ctx); } @@ -335,17 +337,13 @@ void selinux_xfrm_policy_free(struct xfrm_sec_ctx *ctx) int selinux_xfrm_policy_delete(struct xfrm_sec_ctx *ctx) { const struct task_security_struct *tsec = current_security(); - int rc = 0; - if (ctx) { - rc = avc_has_perm(tsec->sid, ctx->ctx_sid, - SECCLASS_ASSOCIATION, - ASSOCIATION__SETCONTEXT, NULL); - if (rc == 0) - atomic_dec(&selinux_xfrm_refcount); - } + if (!ctx) + return 0; - return rc; + return avc_has_perm(tsec->sid, ctx->ctx_sid, + SECCLASS_ASSOCIATION, ASSOCIATION__SETCONTEXT, + NULL); } /* @@ -370,8 +368,8 @@ int selinux_xfrm_state_alloc(struct xfrm_state *x, struct xfrm_user_sec_ctx *uct */ void selinux_xfrm_state_free(struct xfrm_state *x) { - struct xfrm_sec_ctx *ctx = x->security; - kfree(ctx); + atomic_dec(&selinux_xfrm_refcount); + kfree(x->security); } /* @@ -381,17 +379,13 @@ int selinux_xfrm_state_delete(struct xfrm_state *x) { const struct task_security_struct *tsec = current_security(); struct xfrm_sec_ctx *ctx = x->security; - int rc = 0; - if (ctx) { - rc = avc_has_perm(tsec->sid, ctx->ctx_sid, - SECCLASS_ASSOCIATION, - ASSOCIATION__SETCONTEXT, NULL); - if (rc == 0) - atomic_dec(&selinux_xfrm_refcount); - } + if (!ctx) + return 0; - return rc; + return avc_has_perm(tsec->sid, ctx->ctx_sid, + SECCLASS_ASSOCIATION, ASSOCIATION__SETCONTEXT, + NULL); } /* From 6d7581e62f8be462440d7b22c6361f7c9fa4902b Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 29 May 2013 05:02:56 +0000 Subject: [PATCH 291/429] list: introduce list_first_entry_or_null non-rcu variant of list_first_or_null_rcu Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/list.h | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/include/linux/list.h b/include/linux/list.h index 6a1f8df9144b..b83e5657365a 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -361,6 +361,17 @@ static inline void list_splice_tail_init(struct list_head *list, #define list_first_entry(ptr, type, member) \ list_entry((ptr)->next, type, member) +/** + * list_first_entry_or_null - get the first element from a list + * @ptr: the list head to take the element from. + * @type: the type of the struct this is embedded in. + * @member: the name of the list_struct within the struct. + * + * Note that if the list is empty, it returns NULL. + */ +#define list_first_entry_or_null(ptr, type, member) \ + (!list_empty(ptr) ? list_first_entry(ptr, type, member) : NULL) + /** * list_for_each - iterate over a list * @pos: the &struct list_head to use as a loop cursor. From 3f3e7ce4ff87c8ea69acaa7700699fb26baa2914 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 29 May 2013 05:02:57 +0000 Subject: [PATCH 292/429] team: fix port list dump for big number of ports In case the port list dump does not fit into one skb currently the dump would start over again. Fix this by continue from the last dumped port. Introduced by commit d90f889e9c (team: handle sending port list in the same way option list is sent) Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/team/team.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index 7c43261975bd..d016a76ad44b 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -2374,7 +2374,8 @@ static int team_nl_send_port_list_get(struct team *team, u32 portid, u32 seq, bool incomplete; int i; - port = list_first_entry(&team->port_list, struct team_port, list); + port = list_first_entry_or_null(&team->port_list, + struct team_port, list); start_again: err = __send_and_alloc_skb(&skb, team, portid, send_func); @@ -2402,8 +2403,8 @@ start_again: err = team_nl_fill_one_port_get(skb, one_port); if (err) goto errout; - } else { - list_for_each_entry(port, &team->port_list, list) { + } else if (port) { + list_for_each_entry_from(port, &team->port_list, list) { err = team_nl_fill_one_port_get(skb, port); if (err) { if (err == -EMSGSIZE) { From c802db1164f28e62c6a43132b8d290cb8113f2ac Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Tue, 28 May 2013 06:15:56 +0000 Subject: [PATCH 293/429] hyperv: Fix vlan_proto setting in netvsc_recv_callback() Since the recent addition of 8021AD, we need to set the new field vlan_proto in sk_buff. Otherwise, it will trigger BUG() call in vlan_proto_idx(). This patch fixes the problem. Signed-off-by: Haiyang Zhang Reviewed-by: K. Y. Srinivasan Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index 088c55496191..ab2307b5d9a7 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -284,7 +285,7 @@ int netvsc_recv_callback(struct hv_device *device_obj, skb->protocol = eth_type_trans(skb, net); skb->ip_summed = CHECKSUM_NONE; - skb->vlan_tci = packet->vlan_tci; + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), packet->vlan_tci); net->stats.rx_packets++; net->stats.rx_bytes += packet->total_data_buflen; From 3f108de96ba449a8df3d7e3c053bf890fee2cb95 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Mon, 27 May 2013 04:57:09 +0000 Subject: [PATCH 294/429] parisc: memory overflow, 'name' length is too short for using 'path.bc[i]' can be asigned by PCI_SLOT() which can '> 10', so sizeof(6 * "%u:" + "%u" + '\0') may be 21. Since 'name' length is 20, it may be memory overflow. And 'path.bc[i]' is 'unsigned char' for printing, we can be sure the max length of 'name' must be less than 28. So simplify thinking, we can use 28 instead of 20 directly, and do not think of whether 'patchc.bc[i]' can '> 100'. Signed-off-by: Chen Gang Signed-off-by: Helge Deller --- arch/parisc/kernel/drivers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index 5709c5e59be8..14285caec71a 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -394,7 +394,7 @@ EXPORT_SYMBOL(print_pci_hwpath); static void setup_bus_id(struct parisc_device *padev) { struct hardware_path path; - char name[20]; + char name[28]; char *output = name; int i; From ae249b5fa27f9fba25aa59664d4338efc2dd2394 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 28 May 2013 20:35:54 +0000 Subject: [PATCH 295/429] parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 With CONFIG_DISCONTIGMEM=y and multiple physical memory areas, cat /proc/kpageflags triggers this kernel bug: kernel BUG at arch/parisc/include/asm/mmzone.h:50! CPU: 2 PID: 7848 Comm: cat Tainted: G D W 3.10.0-rc3-64bit #44 IAOQ[0]: kpageflags_read0x128/0x238 IAOQ[1]: kpageflags_read0x12c/0x238 RP(r2): proc_reg_read0xbc/0x130 Backtrace: [<00000000402ca2d4>] proc_reg_read0xbc/0x130 [<0000000040235bcc>] vfs_read0xc4/0x1d0 [<0000000040235f0c>] SyS_read0x94/0xf0 [<0000000040105fc0>] syscall_exit0x0/0x14 kpageflags_read() walks through the whole memory, even if some memory areas are physically not available. So, we should better not BUG on an unavailable pfn in pfn_to_nid() but just return the expected value -1 or 0. Signed-off-by: Helge Deller --- arch/parisc/include/asm/mmzone.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/parisc/include/asm/mmzone.h b/arch/parisc/include/asm/mmzone.h index 0e625ab9aaec..cc50d33b7b88 100644 --- a/arch/parisc/include/asm/mmzone.h +++ b/arch/parisc/include/asm/mmzone.h @@ -39,17 +39,14 @@ extern unsigned char pfnnid_map[PFNNID_MAP_MAX]; static inline int pfn_to_nid(unsigned long pfn) { unsigned int i; - unsigned char r; if (unlikely(pfn_is_io(pfn))) return 0; i = pfn >> PFNNID_SHIFT; BUG_ON(i >= ARRAY_SIZE(pfnnid_map)); - r = pfnnid_map[i]; - BUG_ON(r == 0xff); - return (int)r; + return (int)pfnnid_map[i]; } static inline int pfn_valid(int pfn) From 766039022a480ede847659daaa78772bdcc598ae Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Wed, 29 May 2013 09:56:58 +0000 Subject: [PATCH 296/429] parisc: rename "CONFIG_PA7100" to "CONFIG_PA7000" There's a Makefile line setting cflags for CONFIG_PA7100. But that Kconfig macro doesn't exist. There is a Kconfig symbol PA7000, which covers both PA7000 and PA7100 processors. So let's use the corresponding Kconfig macro. Signed-off-by: Paul Bolle Signed-off-by: Helge Deller --- arch/parisc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 197690068f88..96ec3982be8d 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -66,7 +66,7 @@ KBUILD_CFLAGS_KERNEL += -mlong-calls endif # select which processor to optimise for -cflags-$(CONFIG_PA7100) += -march=1.1 -mschedule=7100 +cflags-$(CONFIG_PA7000) += -march=1.1 -mschedule=7100 cflags-$(CONFIG_PA7200) += -march=1.1 -mschedule=7200 cflags-$(CONFIG_PA7100LC) += -march=1.1 -mschedule=7100LC cflags-$(CONFIG_PA7300LC) += -march=1.1 -mschedule=7300 From ea99b1adf22abd62bdcf14b1c9a0a4d3664eefd8 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 30 May 2013 01:18:43 +0000 Subject: [PATCH 297/429] parisc: kernel: using strlcpy() instead of strcpy() 'boot_args' is an input args, and 'boot_command_line' has a fix length. So use strlcpy() instead of strcpy() to avoid memory overflow. Signed-off-by: Chen Gang Acked-by: Kyle McMartin Signed-off-by: Helge Deller --- arch/parisc/kernel/setup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c index 76b63e726a53..1e95b2000ce8 100644 --- a/arch/parisc/kernel/setup.c +++ b/arch/parisc/kernel/setup.c @@ -69,7 +69,8 @@ void __init setup_cmdline(char **cmdline_p) /* called from hpux boot loader */ boot_command_line[0] = '\0'; } else { - strcpy(boot_command_line, (char *)__va(boot_args[1])); + strlcpy(boot_command_line, (char *)__va(boot_args[1]), + COMMAND_LINE_SIZE); #ifdef CONFIG_BLK_DEV_INITRD if (boot_args[2] != 0) /* did palo pass us a ramdisk? */ From 2b6bac9ee99fa7d60dfa0debd82ccf4217931b1e Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 30 May 2013 13:48:07 +0000 Subject: [PATCH 298/429] MAINTAINERS: update parisc architecture file list Signed-off-by: Helge Deller --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 7714c3c363c3..f35a259a6564 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6088,7 +6088,15 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux.git S: Maintained F: arch/parisc/ +F: Documentation/parisc/ F: drivers/parisc/ +F: drivers/char/agp/parisc-agp.c +F: drivers/input/serio/gscps2.c +F: drivers/parport/parport_gsc.* +F: drivers/tty/serial/8250/8250_gsc.c +F: drivers/video/sti* +F: drivers/video/console/sti* +F: drivers/video/logo/logo_parisc* PC87360 HARDWARE MONITORING DRIVER M: Jim Cromie From b47d4934e71d918814aee4a1d0211f81329b767e Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 30 May 2013 11:45:39 -0600 Subject: [PATCH 299/429] parisc/PCI: Set type for LBA bus_num resource The non-PAT resource probing code failed to set the type of the LBA bus_num resource (30aa80da43 "parisc/PCI: register busn_res for root buses" did the corresponding thing for the PAT case). This causes incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. Signed-off-by: Bjorn Helgaas Signed-off-by: Helge Deller --- drivers/parisc/lba_pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 2ef7103270bb..5d25038ef4b0 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -1096,6 +1096,7 @@ lba_legacy_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) r->name = "LBA PCI Busses"; r->start = lba_num & 0xff; r->end = (lba_num>>8) & 0xff; + r->flags = IORESOURCE_BUS; /* Set up local PCI Bus resources - we don't need them for ** Legacy boxes but it's nice to see in /proc/iomem. From b204a4d2d4f2061659bb5c33f5a4013fb0f6ffbe Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 31 May 2013 22:24:58 +0000 Subject: [PATCH 300/429] parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2) commit dc7dce280a Author: Bjorn Helgaas Date: Fri Oct 28 16:27:27 2011 -0600 parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus resources Supply root bus resources to pci_create_root_bus() so they're correct immediately. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. added tests for elmmio_space.start while it should use elmmio_space.flags. This for example led to incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. LBA 10:1: PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [io 0x12000-0x13fff] (bus address [0x2000-0x3fff]) pci_bus 0000:01: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff]) pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff]) pci_bus 0000:01: root bus resource [??? 0x00000001 flags 0x0] Signed-off-by: Helge Deller Acked-by: Bjorn Helgaas --- drivers/parisc/lba_pci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 5d25038ef4b0..1f05913ae677 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -668,7 +668,7 @@ lba_fixup_bus(struct pci_bus *bus) BUG(); } - if (ldev->hba.elmmio_space.start) { + if (ldev->hba.elmmio_space.flags) { err = request_resource(&iomem_resource, &(ldev->hba.elmmio_space)); if (err < 0) { @@ -993,7 +993,7 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) case PAT_LMMIO: /* used to fix up pre-initialized MEM BARs */ - if (!lba_dev->hba.lmmio_space.start) { + if (!lba_dev->hba.lmmio_space.flags) { sprintf(lba_dev->hba.lmmio_name, "PCI%02x LMMIO", (int)lba_dev->hba.bus_num.start); @@ -1001,7 +1001,7 @@ lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) io->start; r = &lba_dev->hba.lmmio_space; r->name = lba_dev->hba.lmmio_name; - } else if (!lba_dev->hba.elmmio_space.start) { + } else if (!lba_dev->hba.elmmio_space.flags) { sprintf(lba_dev->hba.elmmio_name, "PCI%02x ELMMIO", (int)lba_dev->hba.bus_num.start); @@ -1495,7 +1495,7 @@ lba_driver_probe(struct parisc_device *dev) pci_add_resource_offset(&resources, &lba_dev->hba.io_space, HBA_PORT_BASE(lba_dev->hba.hba_num)); - if (lba_dev->hba.elmmio_space.start) + if (lba_dev->hba.elmmio_space.flags) pci_add_resource_offset(&resources, &lba_dev->hba.elmmio_space, lba_dev->hba.lmmio_space_offset); if (lba_dev->hba.lmmio_space.flags) From c218c713c56b01d4a1cd69390f675cc44857f5fd Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 30 May 2013 16:24:46 +0000 Subject: [PATCH 301/429] parport_pc: disable PARPORT_PC_SUPERIO on parisc architecture If enabled, CONFIG_PARPORT_PC_SUPERIO scans on PC-like hardware for various super-io chips by accessing i/o ports in a range which will crash any parisc hardware at once. In addition, parisc has it's own incompatible superio chip (CONFIG_SUPERIO), so if we disable PARPORT_PC_SUPERIO completely for parisc we can avoid that people by accident enable the parport_pc superio option too. Signed-off-by: Helge Deller --- drivers/parport/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig index 24e12d4d1769..a50576081b34 100644 --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig @@ -71,7 +71,7 @@ config PARPORT_PC_FIFO config PARPORT_PC_SUPERIO bool "SuperIO chipset support" - depends on PARPORT_PC + depends on PARPORT_PC && !PARISC help Saying Y here enables some probes for Super-IO chipsets in order to find out things like base addresses, IRQ lines and DMA channels. It From 4edb38695d9a3cd62739f8595e21f36f0aabf4c2 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 30 May 2013 21:06:39 +0000 Subject: [PATCH 302/429] parisc: parport0: fix this legacy no-device port driver! Fix the above kernel error from parport_announce_port() on 32bit GSC machines (e.g. B160L). The parport driver requires now a pointer to the device struct. Signed-off-by: Helge Deller --- drivers/parport/parport_gsc.c | 6 +++--- drivers/parport/parport_gsc.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index a5251cb5fb0c..6e3a60c78873 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -234,7 +234,7 @@ static int parport_PS2_supported(struct parport *pb) struct parport *parport_gsc_probe_port(unsigned long base, unsigned long base_hi, int irq, - int dma, struct pci_dev *dev) + int dma, struct parisc_device *padev) { struct parport_gsc_private *priv; struct parport_operations *ops; @@ -258,7 +258,6 @@ struct parport *parport_gsc_probe_port(unsigned long base, priv->ctr_writable = 0xff; priv->dma_buf = 0; priv->dma_handle = 0; - priv->dev = dev; p->base = base; p->base_hi = base_hi; p->irq = irq; @@ -282,6 +281,7 @@ struct parport *parport_gsc_probe_port(unsigned long base, return NULL; } + p->dev = &padev->dev; p->base_hi = base_hi; p->modes = tmp.modes; p->size = (p->modes & PARPORT_MODE_EPP)?8:3; @@ -373,7 +373,7 @@ static int parport_init_chip(struct parisc_device *dev) } p = parport_gsc_probe_port(port, 0, dev->irq, - /* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, NULL); + /* PARPORT_IRQ_NONE */ PARPORT_DMA_NONE, dev); if (p) parport_count++; dev_set_drvdata(&dev->dev, p); diff --git a/drivers/parport/parport_gsc.h b/drivers/parport/parport_gsc.h index fc9c37c54022..812214768d27 100644 --- a/drivers/parport/parport_gsc.h +++ b/drivers/parport/parport_gsc.h @@ -217,6 +217,6 @@ extern void parport_gsc_dec_use_count(void); extern struct parport *parport_gsc_probe_port(unsigned long base, unsigned long base_hi, int irq, int dma, - struct pci_dev *dev); + struct parisc_device *padev); #endif /* __DRIVERS_PARPORT_PARPORT_GSC_H */ From af1d486c18bad7820b0ca52b413458914231102c Mon Sep 17 00:00:00 2001 From: "lan,Tianyu" Date: Tue, 28 May 2013 02:25:33 +0000 Subject: [PATCH 303/429] x86 / platform / hp_wmi: Fix bluetooth_rfkill misuse in hp_wmi_rfkill_setup() HP wmi platform driver fails to initialize GPS and causes poweroff failure in HP Elitebook 6930p. Call Trace: [] hp_wmi_bios_setup+0x25a/0x3a0 [hp_wmi] [] platform_drv_probe+0x3c/0x70 [] ? driver_sysfs_add+0x7a/0xb0 [] driver_probe_device+0x87/0x3a0 [] __driver_attach+0x93/0xa0 [] ? __device_attach+0x40/0x40 [] bus_for_each_dev+0x63/0xa0 [] driver_attach+0x1e/0x20 [] bus_add_driver+0x1f8/0x2b0 [] driver_register+0x71/0x150 [] platform_driver_register+0x46/0x50 [] platform_driver_probe+0x1b/0xa0 [] hp_wmi_init+0x1be/0x1fb [hp_wmi] [] ? hp_wmi_bios_setup+0x3a0/0x3a0 [hp_wmi] [] do_one_initcall+0x10a/0x160 [] load_module+0x1b46/0x2640 [] ? ddebug_proc_write+0xf0/0xf0 [] sys_init_module+0xa2/0xf0 [] system_call_fastpath+0x1a/0x1f Code: 48 ff ff ff 80 7b 24 00 74 d2 41 83 e5 01 45 38 ec 74 c9 48 8d bb a0 03 00 00 e8 ed fb aa e0 5b 41 5c 41 5d 44 89 f0 41 5e 5d c3 <0f> 0b 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 RIP [] rfkill_set_hw_state+0x9f/0xb0 [rfkill] RSP Check code and find this error is caused by misusing variable bluetooth_rfkill where gps_rfkill should be. Reported-and-tested-by: Iru Cai References: https://bugzilla.kernel.org/show_bug.cgi?id=58401 Cc: All Signed-off-by: Lan Tianyu Signed-off-by: Rafael J. Wysocki --- drivers/platform/x86/hp-wmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 8df0c5a21be2..d111c8687f9b 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -703,7 +703,7 @@ static int hp_wmi_rfkill_setup(struct platform_device *device) } rfkill_init_sw_state(gps_rfkill, hp_wmi_get_sw_state(HPWMI_GPS)); - rfkill_set_hw_state(bluetooth_rfkill, + rfkill_set_hw_state(gps_rfkill, hp_wmi_get_hw_state(HPWMI_GPS)); err = rfkill_register(gps_rfkill); if (err) From fedbe9bc6fd3e14b1ffbb3dac407777ac4a3650c Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Tue, 28 May 2013 02:05:09 +0000 Subject: [PATCH 304/429] ACPI / video: ignore BIOS initial backlight value for HP m4 On HP m4 lapops, BIOS reports minimum backlight on boot and causes backlight to dim completely. This ignores the initial backlight values and set to max brightness. References: https://bugs.launchpad.net/bugs/1184501 Cc: All Signed-off-by: Alex Hung Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 5b32e15a65ce..d0937ab3fb6d 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -464,6 +464,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "HP 1000 Notebook PC"), }, }, + { + .callback = video_ignore_initial_backlight, + .ident = "HP Pavilion m4", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion m4 Notebook PC"), + }, + }, {} }; From 780a6ec640a3fed671fc2c40e4dd30c03eca3ac3 Mon Sep 17 00:00:00 2001 From: Ash Willis Date: Wed, 29 May 2013 01:27:59 +0000 Subject: [PATCH 305/429] ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6 This patch addresses kernel bug 56661. BIOS reports an incorrect backlight value, causing the driver to switch off the backlight completely during startup. This patch ignores the incorrect value from BIOS. References: https://bugzilla.kernel.org/show_bug.cgi?id=56661 Signed-off-by: Ash Willis Cc: All Signed-off-by: Rafael J. Wysocki --- drivers/acpi/video.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index d0937ab3fb6d..5d7075d25700 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -456,6 +456,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dm4 Notebook PC"), }, }, + { + .callback = video_ignore_initial_backlight, + .ident = "HP Pavilion g6 Notebook PC", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion g6 Notebook PC"), + }, + }, { .callback = video_ignore_initial_backlight, .ident = "HP 1000 Notebook PC", From 52a2a1087b5924de00484f35ef5e2a73f61dbd22 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 1 Jun 2013 02:38:35 +0400 Subject: [PATCH 306/429] sata_rcar: fix interrupt handling The driver's interrupt handling code is too picky in deciding whether it should handle an interrupt or not which causes completely unneeded spurious interrupts. Thus make sata_rcar_{ata|serr}_interrupt() *void*; add ATA status register read to sata_rcar_ata_interrupt() to clear an unexpected ATA interrupt -- it doesn't get cleared by writing to the SATAINTSTAT register in the interrupt mode we use. Also, in sata_rcar_ata_interrupt() we should check SATAINTSTAT register only for enabled interrupts and we should clear only those interrupts that we have read as active first time around, because else we have a race and risk clearing an interrupt that can occur between read and write of the SATAINTSTAT register and never registering it... Signed-off-by: Sergei Shtylyov Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org --- drivers/ata/sata_rcar.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c index a8e091aafdde..249c8a289bfd 100644 --- a/drivers/ata/sata_rcar.c +++ b/drivers/ata/sata_rcar.c @@ -619,17 +619,16 @@ static struct ata_port_operations sata_rcar_port_ops = { .bmdma_status = sata_rcar_bmdma_status, }; -static int sata_rcar_serr_interrupt(struct ata_port *ap) +static void sata_rcar_serr_interrupt(struct ata_port *ap) { struct sata_rcar_priv *priv = ap->host->private_data; struct ata_eh_info *ehi = &ap->link.eh_info; int freeze = 0; - int handled = 0; u32 serror; serror = ioread32(priv->base + SCRSERR_REG); if (!serror) - return 0; + return; DPRINTK("SError @host_intr: 0x%x\n", serror); @@ -642,7 +641,6 @@ static int sata_rcar_serr_interrupt(struct ata_port *ap) ata_ehi_push_desc(ehi, "%s", "hotplug"); freeze = serror & SERR_COMM_WAKE ? 0 : 1; - handled = 1; } /* freeze or abort */ @@ -650,11 +648,9 @@ static int sata_rcar_serr_interrupt(struct ata_port *ap) ata_port_freeze(ap); else ata_port_abort(ap); - - return handled; } -static int sata_rcar_ata_interrupt(struct ata_port *ap) +static void sata_rcar_ata_interrupt(struct ata_port *ap) { struct ata_queued_cmd *qc; int handled = 0; @@ -663,7 +659,9 @@ static int sata_rcar_ata_interrupt(struct ata_port *ap) if (qc) handled |= ata_bmdma_port_intr(ap, qc); - return handled; + /* be sure to clear ATA interrupt */ + if (!handled) + sata_rcar_check_status(ap); } static irqreturn_t sata_rcar_interrupt(int irq, void *dev_instance) @@ -678,20 +676,21 @@ static irqreturn_t sata_rcar_interrupt(int irq, void *dev_instance) spin_lock_irqsave(&host->lock, flags); sataintstat = ioread32(priv->base + SATAINTSTAT_REG); + sataintstat &= SATA_RCAR_INT_MASK; if (!sataintstat) goto done; /* ack */ - iowrite32(sataintstat & ~SATA_RCAR_INT_MASK, - priv->base + SATAINTSTAT_REG); + iowrite32(~sataintstat & 0x7ff, priv->base + SATAINTSTAT_REG); ap = host->ports[0]; if (sataintstat & SATAINTSTAT_ATA) - handled |= sata_rcar_ata_interrupt(ap); + sata_rcar_ata_interrupt(ap); if (sataintstat & SATAINTSTAT_SERR) - handled |= sata_rcar_serr_interrupt(ap); + sata_rcar_serr_interrupt(ap); + handled = 1; done: spin_unlock_irqrestore(&host->lock, flags); From d683b96b072dc4680fc74964eca77e6a23d1fa6e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 2 Jun 2013 17:11:17 +0900 Subject: [PATCH 307/429] Linux 3.10-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 73e20dba55c1..49aa84b9d2fb 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Unicycling Gorilla # *DOCUMENTATION* From 13731d862cf5219216533a3b0de052cee4cc5038 Mon Sep 17 00:00:00 2001 From: Jongsung Kim Date: Wed, 29 May 2013 22:07:39 -0600 Subject: [PATCH 308/429] ARM: bcm2835: override the HW UART periphid Stephen Warren reported the recent commit 78506f2 (add support for extended FIFO-size of PL011-r1p5) breaks the serial port on the BCM2835 ARM SoC. A UART compatible with the ARM PL011-r1p5 should have 32-deep FIFOs. The BCM2835 UART just looks like an ARM PL011-r1p5, but has 16-deep FIFOs just like PL011-r1p4 or earlier revisions. As a workaround for this compatibility issue, this patch overrides the HW UART periphid register values with the actually compatible UART periphid 0x00241011 (r1p3 or r1p4). Reported-by: Stephen Warren Signed-off-by: Jongsung Kim Signed-off-by: Stephen Warren Signed-off-by: Olof Johansson --- arch/arm/boot/dts/bcm2835.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index f0052dccf9a8..1e12aeff403b 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -44,6 +44,7 @@ reg = <0x7e201000 0x1000>; interrupts = <2 25>; clock-frequency = <3000000>; + arm,primecell-periphid = <0x00241011>; }; gpio: gpio { From c87a124a5d5e8cf8e21c4363c3372bcaf53ea190 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 29 May 2013 09:06:27 +0000 Subject: [PATCH 309/429] net: force a reload of first item in hlist_nulls_for_each_entry_rcu Roman Gushchin discovered that udp4_lib_lookup2() was not reloading first item in the rcu protected list, in case the loop was restarted. This produced soft lockups as in https://lkml.org/lkml/2013/4/16/37 rcu_dereference(X)/ACCESS_ONCE(X) seem to not work as intended if X is ptr->field : In some cases, gcc caches the value or ptr->field in a register. Use a barrier() to disallow such caching, as documented in Documentation/atomic_ops.txt line 114 Thanks a lot to Roman for providing analysis and numerous patches. Diagnosed-by: Roman Gushchin Signed-off-by: Eric Dumazet Reported-by: Boris Zhmurov Signed-off-by: Roman Gushchin Acked-by: Paul E. McKenney Signed-off-by: David S. Miller --- include/linux/rculist_nulls.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h index 2ae13714828b..1c33dd7da4a7 100644 --- a/include/linux/rculist_nulls.h +++ b/include/linux/rculist_nulls.h @@ -105,9 +105,14 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n, * @head: the head for your list. * @member: the name of the hlist_nulls_node within the struct. * + * The barrier() is needed to make sure compiler doesn't cache first element [1], + * as this loop can be restarted [2] + * [1] Documentation/atomic_ops.txt around line 114 + * [2] Documentation/RCU/rculist_nulls.txt around line 146 */ #define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member) \ - for (pos = rcu_dereference_raw(hlist_nulls_first_rcu(head)); \ + for (({barrier();}), \ + pos = rcu_dereference_raw(hlist_nulls_first_rcu(head)); \ (!is_a_nulls(pos)) && \ ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1; }); \ pos = rcu_dereference_raw(hlist_nulls_next_rcu(pos))) From 01cb71d2d47b78354358e4bb938bb06323e17498 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 2 Jun 2013 13:55:05 +0000 Subject: [PATCH 310/429] net_sched: restore "overhead xxx" handling commit 56b765b79 ("htb: improved accuracy at high rates") broke the "overhead xxx" handling, as well as the "linklayer atm" attribute. tc class add ... htb rate X ceil Y linklayer atm overhead 10 This patch restores the "overhead xxx" handling, for htb, tbf and act_police The "linklayer atm" thing needs a separate fix. Reported-by: Jesper Dangaard Brouer Signed-off-by: Eric Dumazet Cc: Vimalkumar Cc: Jiri Pirko Signed-off-by: David S. Miller --- include/net/sch_generic.h | 18 +++++++++++------- net/sched/act_police.c | 8 ++++---- net/sched/sch_generic.c | 8 +++++--- net/sched/sch_htb.c | 8 ++++---- net/sched/sch_tbf.c | 8 ++++---- 5 files changed, 28 insertions(+), 22 deletions(-) diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index f10818fc8804..e7f4e21cc3e1 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -679,22 +679,26 @@ static inline struct sk_buff *skb_act_clone(struct sk_buff *skb, gfp_t gfp_mask, #endif struct psched_ratecfg { - u64 rate_bps; - u32 mult; - u32 shift; + u64 rate_bps; + u32 mult; + u16 overhead; + u8 shift; }; static inline u64 psched_l2t_ns(const struct psched_ratecfg *r, unsigned int len) { - return ((u64)len * r->mult) >> r->shift; + return ((u64)(len + r->overhead) * r->mult) >> r->shift; } -extern void psched_ratecfg_precompute(struct psched_ratecfg *r, u32 rate); +extern void psched_ratecfg_precompute(struct psched_ratecfg *r, const struct tc_ratespec *conf); -static inline u32 psched_ratecfg_getrate(const struct psched_ratecfg *r) +static inline void psched_ratecfg_getrate(struct tc_ratespec *res, + const struct psched_ratecfg *r) { - return r->rate_bps >> 3; + memset(res, 0, sizeof(*res)); + res->rate = r->rate_bps >> 3; + res->overhead = r->overhead; } #endif diff --git a/net/sched/act_police.c b/net/sched/act_police.c index 823463adbd21..189e3c5b3d09 100644 --- a/net/sched/act_police.c +++ b/net/sched/act_police.c @@ -231,14 +231,14 @@ override: } if (R_tab) { police->rate_present = true; - psched_ratecfg_precompute(&police->rate, R_tab->rate.rate); + psched_ratecfg_precompute(&police->rate, &R_tab->rate); qdisc_put_rtab(R_tab); } else { police->rate_present = false; } if (P_tab) { police->peak_present = true; - psched_ratecfg_precompute(&police->peak, P_tab->rate.rate); + psched_ratecfg_precompute(&police->peak, &P_tab->rate); qdisc_put_rtab(P_tab); } else { police->peak_present = false; @@ -376,9 +376,9 @@ tcf_act_police_dump(struct sk_buff *skb, struct tc_action *a, int bind, int ref) }; if (police->rate_present) - opt.rate.rate = psched_ratecfg_getrate(&police->rate); + psched_ratecfg_getrate(&opt.rate, &police->rate); if (police->peak_present) - opt.peakrate.rate = psched_ratecfg_getrate(&police->peak); + psched_ratecfg_getrate(&opt.peakrate, &police->peak); if (nla_put(skb, TCA_POLICE_TBF, sizeof(opt), &opt)) goto nla_put_failure; if (police->tcfp_result && diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index eac7e0ee23c1..20224086cc28 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -898,14 +898,16 @@ void dev_shutdown(struct net_device *dev) WARN_ON(timer_pending(&dev->watchdog_timer)); } -void psched_ratecfg_precompute(struct psched_ratecfg *r, u32 rate) +void psched_ratecfg_precompute(struct psched_ratecfg *r, + const struct tc_ratespec *conf) { u64 factor; u64 mult; int shift; - r->rate_bps = (u64)rate << 3; - r->shift = 0; + memset(r, 0, sizeof(*r)); + r->overhead = conf->overhead; + r->rate_bps = (u64)conf->rate << 3; r->mult = 1; /* * Calibrate mult, shift so that token counting is accurate diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 79b1876b6cd2..f87fb850b7ef 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -1090,9 +1090,9 @@ static int htb_dump_class(struct Qdisc *sch, unsigned long arg, memset(&opt, 0, sizeof(opt)); - opt.rate.rate = psched_ratecfg_getrate(&cl->rate); + psched_ratecfg_getrate(&opt.rate, &cl->rate); opt.buffer = PSCHED_NS2TICKS(cl->buffer); - opt.ceil.rate = psched_ratecfg_getrate(&cl->ceil); + psched_ratecfg_getrate(&opt.ceil, &cl->ceil); opt.cbuffer = PSCHED_NS2TICKS(cl->cbuffer); opt.quantum = cl->quantum; opt.prio = cl->prio; @@ -1459,8 +1459,8 @@ static int htb_change_class(struct Qdisc *sch, u32 classid, cl->prio = TC_HTB_NUMPRIO - 1; } - psched_ratecfg_precompute(&cl->rate, hopt->rate.rate); - psched_ratecfg_precompute(&cl->ceil, hopt->ceil.rate); + psched_ratecfg_precompute(&cl->rate, &hopt->rate); + psched_ratecfg_precompute(&cl->ceil, &hopt->ceil); cl->buffer = PSCHED_TICKS2NS(hopt->buffer); cl->cbuffer = PSCHED_TICKS2NS(hopt->buffer); diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c index c8388f3c3426..e478d316602b 100644 --- a/net/sched/sch_tbf.c +++ b/net/sched/sch_tbf.c @@ -298,9 +298,9 @@ static int tbf_change(struct Qdisc *sch, struct nlattr *opt) q->tokens = q->buffer; q->ptokens = q->mtu; - psched_ratecfg_precompute(&q->rate, rtab->rate.rate); + psched_ratecfg_precompute(&q->rate, &rtab->rate); if (ptab) { - psched_ratecfg_precompute(&q->peak, ptab->rate.rate); + psched_ratecfg_precompute(&q->peak, &ptab->rate); q->peak_present = true; } else { q->peak_present = false; @@ -350,9 +350,9 @@ static int tbf_dump(struct Qdisc *sch, struct sk_buff *skb) goto nla_put_failure; opt.limit = q->limit; - opt.rate.rate = psched_ratecfg_getrate(&q->rate); + psched_ratecfg_getrate(&opt.rate, &q->rate); if (q->peak_present) - opt.peakrate.rate = psched_ratecfg_getrate(&q->peak); + psched_ratecfg_getrate(&opt.peakrate, &q->peak); else memset(&opt.peakrate, 0, sizeof(opt.peakrate)); opt.mtu = PSCHED_NS2TICKS(q->mtu); From a08b9bc586a7810cdebbc316d5cbaed56a2a04a9 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Fri, 31 May 2013 17:01:54 -0400 Subject: [PATCH 311/429] ARM: imx: clk-imx6q: AXI clock select index is incorrect The AXI clock mux should be as below: 00: periph; 01: pll2_pfd2_396m; 10: periph; 11: pll3_pfd1_540m; Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ba2de54a39db..4e3148ce852d 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -181,7 +181,7 @@ static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; -static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", }; +static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", }; static const char *audio_sels[] = { "pll4_post_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; static const char *gpu_axi_sels[] = { "axi", "ahb", }; static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; From a0c6d309c6df14655f9962f666d1da96318b0b7c Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Sun, 2 Jun 2013 19:49:07 +0200 Subject: [PATCH 312/429] ALSA: usb-audio: fix Roland/Cakewalk UM-3G support Commit 927c9423dd5f2d1c0b93d5e694ab84b4a5559713 (ALSA: usb-audio: add Edirol UM-3G support) used a wrong quirk type, which would make the driver refuse to attach with the error message "MIDIStreaming interface descriptor not found". Cc: # 3.3 and later Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/usb/quirks-table.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 7f1722f82c89..6ae71b84b39d 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -1792,7 +1792,11 @@ YAMAHA_DEVICE(0x7010, "UB99"), USB_DEVICE_VENDOR_SPEC(0x0582, 0x0108), .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { .ifnum = 0, - .type = QUIRK_MIDI_STANDARD_INTERFACE + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = & (const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0007, + .in_cables = 0x0007 + } } }, { From 1f3dc6d76424538efb2095055035254b14499c77 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:05 -0700 Subject: [PATCH 313/429] mips/kvm: Fix ABI for use of FPU. Define a non-empty struct kvm_fpu. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini --- arch/mips/include/uapi/asm/kvm.h | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h index 85789eacbf18..0e8f5658c03e 100644 --- a/arch/mips/include/uapi/asm/kvm.h +++ b/arch/mips/include/uapi/asm/kvm.h @@ -1,11 +1,12 @@ /* -* This file is subject to the terms and conditions of the GNU General Public -* License. See the file "COPYING" in the main directory of this archive -* for more details. -* -* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. -* Authors: Sanjay Lal -*/ + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2013 Cavium, Inc. + * Authors: Sanjay Lal + */ #ifndef __LINUX_KVM_MIPS_H #define __LINUX_KVM_MIPS_H @@ -31,8 +32,20 @@ struct kvm_regs { struct kvm_sregs { }; -/* for KVM_GET_FPU and KVM_SET_FPU */ +/* + * for KVM_GET_FPU and KVM_SET_FPU + * + * If Status[FR] is zero (32-bit FPU), the upper 32-bits of the FPRs + * are zero filled. + */ struct kvm_fpu { + __u64 fpr[32]; + __u32 fir; + __u32 fccr; + __u32 fexr; + __u32 fenr; + __u32 fcsr; + __u32 pad; }; struct kvm_debug_exit_arch { From 688cded320a4760de679160b42f9a81face02674 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:06 -0700 Subject: [PATCH 314/429] mips/kvm: Fix ABI for use of 64-bit registers. All registers are 64-bits wide, 32-bit guests use the least significant portion of the register storage fields. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini --- arch/mips/include/uapi/asm/kvm.h | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h index 0e8f5658c03e..86812fb61842 100644 --- a/arch/mips/include/uapi/asm/kvm.h +++ b/arch/mips/include/uapi/asm/kvm.h @@ -18,12 +18,18 @@ #define N_MIPS_COPROC_REGS 32 #define N_MIPS_COPROC_SEL 8 -/* for KVM_GET_REGS and KVM_SET_REGS */ +/* + * for KVM_GET_REGS and KVM_SET_REGS + * + * If Config[AT] is zero (32-bit CPU), the register contents are + * stored in the lower 32-bits of the struct kvm_regs fields and sign + * extended to 64-bits. + */ struct kvm_regs { - __u32 gprs[32]; - __u32 hi; - __u32 lo; - __u32 pc; + __u64 gprs[32]; + __u64 hi; + __u64 lo; + __u64 pc; __u32 cp0reg[N_MIPS_COPROC_REGS][N_MIPS_COPROC_SEL]; }; From bf32ebf66d74e8a196256d7ac2a4f3c6938c614a Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:07 -0700 Subject: [PATCH 315/429] mips/kvm: Fix name of gpr field in struct kvm_regs. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini --- arch/mips/include/uapi/asm/kvm.h | 3 ++- arch/mips/kvm/kvm_mips.c | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h index 86812fb61842..d145ead16b2c 100644 --- a/arch/mips/include/uapi/asm/kvm.h +++ b/arch/mips/include/uapi/asm/kvm.h @@ -26,7 +26,8 @@ * extended to 64-bits. */ struct kvm_regs { - __u64 gprs[32]; + /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */ + __u64 gpr[32]; __u64 hi; __u64 lo; __u64 pc; diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c index e0dad0289797..93da7508c6b6 100644 --- a/arch/mips/kvm/kvm_mips.c +++ b/arch/mips/kvm/kvm_mips.c @@ -678,7 +678,7 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) int i; for (i = 0; i < 32; i++) - vcpu->arch.gprs[i] = regs->gprs[i]; + vcpu->arch.gprs[i] = regs->gpr[i]; vcpu->arch.hi = regs->hi; vcpu->arch.lo = regs->lo; @@ -692,7 +692,7 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) int i; for (i = 0; i < 32; i++) - regs->gprs[i] = vcpu->arch.gprs[i]; + regs->gpr[i] = vcpu->arch.gprs[i]; regs->hi = vcpu->arch.hi; regs->lo = vcpu->arch.lo; From 8d17dd041a548b016ff401d36be6b2563c940ed5 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:08 -0700 Subject: [PATCH 316/429] mips/kvm: Use ARRAY_SIZE() instead of hardcoded constants in kvm_arch_vcpu_ioctl_{s,g}et_regs Also we cannot set special zero register, so force it to zero. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini --- arch/mips/kvm/kvm_mips.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c index 93da7508c6b6..71a1fc191078 100644 --- a/arch/mips/kvm/kvm_mips.c +++ b/arch/mips/kvm/kvm_mips.c @@ -677,9 +677,9 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) { int i; - for (i = 0; i < 32; i++) + for (i = 1; i < ARRAY_SIZE(vcpu->arch.gprs); i++) vcpu->arch.gprs[i] = regs->gpr[i]; - + vcpu->arch.gprs[0] = 0; /* zero is special, and cannot be set. */ vcpu->arch.hi = regs->hi; vcpu->arch.lo = regs->lo; vcpu->arch.pc = regs->pc; @@ -691,7 +691,7 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) { int i; - for (i = 0; i < 32; i++) + for (i = 0; i < ARRAY_SIZE(vcpu->arch.gprs); i++) regs->gpr[i] = vcpu->arch.gprs[i]; regs->hi = vcpu->arch.hi; From 4c73fb2b05192f2c817940b38015c36007379380 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:09 -0700 Subject: [PATCH 317/429] mips/kvm: Fix ABI by moving manipulation of CP0 registers to KVM_{G,S}ET_ONE_REG Because not all 256 CP0 registers are ever implemented, we need a different method of manipulating them. Use the KVM_SET_ONE_REG/KVM_GET_ONE_REG mechanism. Now unused code and definitions are removed. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini --- arch/mips/include/asm/kvm_host.h | 4 - arch/mips/include/uapi/asm/kvm.h | 91 +++++++++-- arch/mips/kvm/kvm_mips.c | 252 ++++++++++++++++++++++++++++++- arch/mips/kvm/kvm_trap_emul.c | 50 ------ 4 files changed, 322 insertions(+), 75 deletions(-) diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h index 143875c6c95a..4d6fa0bf1305 100644 --- a/arch/mips/include/asm/kvm_host.h +++ b/arch/mips/include/asm/kvm_host.h @@ -496,10 +496,6 @@ struct kvm_mips_callbacks { uint32_t cause); int (*irq_clear) (struct kvm_vcpu *vcpu, unsigned int priority, uint32_t cause); - int (*vcpu_ioctl_get_regs) (struct kvm_vcpu *vcpu, - struct kvm_regs *regs); - int (*vcpu_ioctl_set_regs) (struct kvm_vcpu *vcpu, - struct kvm_regs *regs); }; extern struct kvm_mips_callbacks *kvm_mips_callbacks; int kvm_mips_emulation_init(struct kvm_mips_callbacks **install_callbacks); diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h index d145ead16b2c..3f424f5217da 100644 --- a/arch/mips/include/uapi/asm/kvm.h +++ b/arch/mips/include/uapi/asm/kvm.h @@ -13,10 +13,11 @@ #include -#define __KVM_MIPS - -#define N_MIPS_COPROC_REGS 32 -#define N_MIPS_COPROC_SEL 8 +/* + * KVM MIPS specific structures and definitions. + * + * Some parts derived from the x86 version of this file. + */ /* * for KVM_GET_REGS and KVM_SET_REGS @@ -31,12 +32,6 @@ struct kvm_regs { __u64 hi; __u64 lo; __u64 pc; - - __u32 cp0reg[N_MIPS_COPROC_REGS][N_MIPS_COPROC_SEL]; -}; - -/* for KVM_GET_SREGS and KVM_SET_SREGS */ -struct kvm_sregs { }; /* @@ -55,21 +50,89 @@ struct kvm_fpu { __u32 pad; }; + +/* + * For MIPS, we use KVM_SET_ONE_REG and KVM_GET_ONE_REG to access CP0 + * registers. The id field is broken down as follows: + * + * bits[2..0] - Register 'sel' index. + * bits[7..3] - Register 'rd' index. + * bits[15..8] - Must be zero. + * bits[63..16] - 1 -> CP0 registers. + * + * Other sets registers may be added in the future. Each set would + * have its own identifier in bits[63..16]. + * + * The addr field of struct kvm_one_reg must point to an aligned + * 64-bit wide location. For registers that are narrower than + * 64-bits, the value is stored in the low order bits of the location, + * and sign extended to 64-bits. + * + * The registers defined in struct kvm_regs are also accessible, the + * id values for these are below. + */ + +#define KVM_REG_MIPS_R0 0 +#define KVM_REG_MIPS_R1 1 +#define KVM_REG_MIPS_R2 2 +#define KVM_REG_MIPS_R3 3 +#define KVM_REG_MIPS_R4 4 +#define KVM_REG_MIPS_R5 5 +#define KVM_REG_MIPS_R6 6 +#define KVM_REG_MIPS_R7 7 +#define KVM_REG_MIPS_R8 8 +#define KVM_REG_MIPS_R9 9 +#define KVM_REG_MIPS_R10 10 +#define KVM_REG_MIPS_R11 11 +#define KVM_REG_MIPS_R12 12 +#define KVM_REG_MIPS_R13 13 +#define KVM_REG_MIPS_R14 14 +#define KVM_REG_MIPS_R15 15 +#define KVM_REG_MIPS_R16 16 +#define KVM_REG_MIPS_R17 17 +#define KVM_REG_MIPS_R18 18 +#define KVM_REG_MIPS_R19 19 +#define KVM_REG_MIPS_R20 20 +#define KVM_REG_MIPS_R21 21 +#define KVM_REG_MIPS_R22 22 +#define KVM_REG_MIPS_R23 23 +#define KVM_REG_MIPS_R24 24 +#define KVM_REG_MIPS_R25 25 +#define KVM_REG_MIPS_R26 26 +#define KVM_REG_MIPS_R27 27 +#define KVM_REG_MIPS_R28 28 +#define KVM_REG_MIPS_R29 29 +#define KVM_REG_MIPS_R30 30 +#define KVM_REG_MIPS_R31 31 + +#define KVM_REG_MIPS_HI 32 +#define KVM_REG_MIPS_LO 33 +#define KVM_REG_MIPS_PC 34 + +/* + * KVM MIPS specific structures and definitions + * + */ struct kvm_debug_exit_arch { + __u64 epc; }; /* for KVM_SET_GUEST_DEBUG */ struct kvm_guest_debug_arch { }; +/* definition of registers in kvm_run */ +struct kvm_sync_regs { +}; + +/* dummy definition */ +struct kvm_sregs { +}; + struct kvm_mips_interrupt { /* in */ __u32 cpu; __u32 irq; }; -/* definition of registers in kvm_run */ -struct kvm_sync_regs { -}; - #endif /* __LINUX_KVM_MIPS_H */ diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c index 71a1fc191078..3caa0062ac1f 100644 --- a/arch/mips/kvm/kvm_mips.c +++ b/arch/mips/kvm/kvm_mips.c @@ -485,15 +485,253 @@ kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, return -EINVAL; } +#define KVM_REG_MIPS_CP0_INDEX (0x10000 + 8 * 0 + 0) +#define KVM_REG_MIPS_CP0_ENTRYLO0 (0x10000 + 8 * 2 + 0) +#define KVM_REG_MIPS_CP0_ENTRYLO1 (0x10000 + 8 * 3 + 0) +#define KVM_REG_MIPS_CP0_CONTEXT (0x10000 + 8 * 4 + 0) +#define KVM_REG_MIPS_CP0_USERLOCAL (0x10000 + 8 * 4 + 2) +#define KVM_REG_MIPS_CP0_PAGEMASK (0x10000 + 8 * 5 + 0) +#define KVM_REG_MIPS_CP0_PAGEGRAIN (0x10000 + 8 * 5 + 1) +#define KVM_REG_MIPS_CP0_WIRED (0x10000 + 8 * 6 + 0) +#define KVM_REG_MIPS_CP0_HWRENA (0x10000 + 8 * 7 + 0) +#define KVM_REG_MIPS_CP0_BADVADDR (0x10000 + 8 * 8 + 0) +#define KVM_REG_MIPS_CP0_COUNT (0x10000 + 8 * 9 + 0) +#define KVM_REG_MIPS_CP0_ENTRYHI (0x10000 + 8 * 10 + 0) +#define KVM_REG_MIPS_CP0_COMPARE (0x10000 + 8 * 11 + 0) +#define KVM_REG_MIPS_CP0_STATUS (0x10000 + 8 * 12 + 0) +#define KVM_REG_MIPS_CP0_CAUSE (0x10000 + 8 * 13 + 0) +#define KVM_REG_MIPS_CP0_EBASE (0x10000 + 8 * 15 + 1) +#define KVM_REG_MIPS_CP0_CONFIG (0x10000 + 8 * 16 + 0) +#define KVM_REG_MIPS_CP0_CONFIG1 (0x10000 + 8 * 16 + 1) +#define KVM_REG_MIPS_CP0_CONFIG2 (0x10000 + 8 * 16 + 2) +#define KVM_REG_MIPS_CP0_CONFIG3 (0x10000 + 8 * 16 + 3) +#define KVM_REG_MIPS_CP0_CONFIG7 (0x10000 + 8 * 16 + 7) +#define KVM_REG_MIPS_CP0_XCONTEXT (0x10000 + 8 * 20 + 0) +#define KVM_REG_MIPS_CP0_ERROREPC (0x10000 + 8 * 30 + 0) + +static u64 kvm_mips_get_one_regs[] = { + KVM_REG_MIPS_R0, + KVM_REG_MIPS_R1, + KVM_REG_MIPS_R2, + KVM_REG_MIPS_R3, + KVM_REG_MIPS_R4, + KVM_REG_MIPS_R5, + KVM_REG_MIPS_R6, + KVM_REG_MIPS_R7, + KVM_REG_MIPS_R8, + KVM_REG_MIPS_R9, + KVM_REG_MIPS_R10, + KVM_REG_MIPS_R11, + KVM_REG_MIPS_R12, + KVM_REG_MIPS_R13, + KVM_REG_MIPS_R14, + KVM_REG_MIPS_R15, + KVM_REG_MIPS_R16, + KVM_REG_MIPS_R17, + KVM_REG_MIPS_R18, + KVM_REG_MIPS_R19, + KVM_REG_MIPS_R20, + KVM_REG_MIPS_R21, + KVM_REG_MIPS_R22, + KVM_REG_MIPS_R23, + KVM_REG_MIPS_R24, + KVM_REG_MIPS_R25, + KVM_REG_MIPS_R26, + KVM_REG_MIPS_R27, + KVM_REG_MIPS_R28, + KVM_REG_MIPS_R29, + KVM_REG_MIPS_R30, + KVM_REG_MIPS_R31, + + KVM_REG_MIPS_HI, + KVM_REG_MIPS_LO, + KVM_REG_MIPS_PC, + + KVM_REG_MIPS_CP0_INDEX, + KVM_REG_MIPS_CP0_CONTEXT, + KVM_REG_MIPS_CP0_PAGEMASK, + KVM_REG_MIPS_CP0_WIRED, + KVM_REG_MIPS_CP0_BADVADDR, + KVM_REG_MIPS_CP0_ENTRYHI, + KVM_REG_MIPS_CP0_STATUS, + KVM_REG_MIPS_CP0_CAUSE, + /* EPC set via kvm_regs, et al. */ + KVM_REG_MIPS_CP0_CONFIG, + KVM_REG_MIPS_CP0_CONFIG1, + KVM_REG_MIPS_CP0_CONFIG2, + KVM_REG_MIPS_CP0_CONFIG3, + KVM_REG_MIPS_CP0_CONFIG7, + KVM_REG_MIPS_CP0_ERROREPC +}; + +static int kvm_mips_get_reg(struct kvm_vcpu *vcpu, + const struct kvm_one_reg *reg) +{ + u64 __user *uaddr = (u64 __user *)(long)reg->addr; + + struct mips_coproc *cop0 = vcpu->arch.cop0; + s64 v; + + switch (reg->id) { + case KVM_REG_MIPS_R0 ... KVM_REG_MIPS_R31: + v = (long)vcpu->arch.gprs[reg->id - KVM_REG_MIPS_R0]; + break; + case KVM_REG_MIPS_HI: + v = (long)vcpu->arch.hi; + break; + case KVM_REG_MIPS_LO: + v = (long)vcpu->arch.lo; + break; + case KVM_REG_MIPS_PC: + v = (long)vcpu->arch.pc; + break; + + case KVM_REG_MIPS_CP0_INDEX: + v = (long)kvm_read_c0_guest_index(cop0); + break; + case KVM_REG_MIPS_CP0_CONTEXT: + v = (long)kvm_read_c0_guest_context(cop0); + break; + case KVM_REG_MIPS_CP0_PAGEMASK: + v = (long)kvm_read_c0_guest_pagemask(cop0); + break; + case KVM_REG_MIPS_CP0_WIRED: + v = (long)kvm_read_c0_guest_wired(cop0); + break; + case KVM_REG_MIPS_CP0_BADVADDR: + v = (long)kvm_read_c0_guest_badvaddr(cop0); + break; + case KVM_REG_MIPS_CP0_ENTRYHI: + v = (long)kvm_read_c0_guest_entryhi(cop0); + break; + case KVM_REG_MIPS_CP0_STATUS: + v = (long)kvm_read_c0_guest_status(cop0); + break; + case KVM_REG_MIPS_CP0_CAUSE: + v = (long)kvm_read_c0_guest_cause(cop0); + break; + case KVM_REG_MIPS_CP0_ERROREPC: + v = (long)kvm_read_c0_guest_errorepc(cop0); + break; + case KVM_REG_MIPS_CP0_CONFIG: + v = (long)kvm_read_c0_guest_config(cop0); + break; + case KVM_REG_MIPS_CP0_CONFIG1: + v = (long)kvm_read_c0_guest_config1(cop0); + break; + case KVM_REG_MIPS_CP0_CONFIG2: + v = (long)kvm_read_c0_guest_config2(cop0); + break; + case KVM_REG_MIPS_CP0_CONFIG3: + v = (long)kvm_read_c0_guest_config3(cop0); + break; + case KVM_REG_MIPS_CP0_CONFIG7: + v = (long)kvm_read_c0_guest_config7(cop0); + break; + default: + return -EINVAL; + } + return put_user(v, uaddr); +} + +static int kvm_mips_set_reg(struct kvm_vcpu *vcpu, + const struct kvm_one_reg *reg) +{ + u64 __user *uaddr = (u64 __user *)(long)reg->addr; + struct mips_coproc *cop0 = vcpu->arch.cop0; + u64 v; + + if (get_user(v, uaddr) != 0) + return -EFAULT; + + switch (reg->id) { + case KVM_REG_MIPS_R0: + /* Silently ignore requests to set $0 */ + break; + case KVM_REG_MIPS_R1 ... KVM_REG_MIPS_R31: + vcpu->arch.gprs[reg->id - KVM_REG_MIPS_R0] = v; + break; + case KVM_REG_MIPS_HI: + vcpu->arch.hi = v; + break; + case KVM_REG_MIPS_LO: + vcpu->arch.lo = v; + break; + case KVM_REG_MIPS_PC: + vcpu->arch.pc = v; + break; + + case KVM_REG_MIPS_CP0_INDEX: + kvm_write_c0_guest_index(cop0, v); + break; + case KVM_REG_MIPS_CP0_CONTEXT: + kvm_write_c0_guest_context(cop0, v); + break; + case KVM_REG_MIPS_CP0_PAGEMASK: + kvm_write_c0_guest_pagemask(cop0, v); + break; + case KVM_REG_MIPS_CP0_WIRED: + kvm_write_c0_guest_wired(cop0, v); + break; + case KVM_REG_MIPS_CP0_BADVADDR: + kvm_write_c0_guest_badvaddr(cop0, v); + break; + case KVM_REG_MIPS_CP0_ENTRYHI: + kvm_write_c0_guest_entryhi(cop0, v); + break; + case KVM_REG_MIPS_CP0_STATUS: + kvm_write_c0_guest_status(cop0, v); + break; + case KVM_REG_MIPS_CP0_CAUSE: + kvm_write_c0_guest_cause(cop0, v); + break; + case KVM_REG_MIPS_CP0_ERROREPC: + kvm_write_c0_guest_errorepc(cop0, v); + break; + default: + return -EINVAL; + } + return 0; +} + long kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { struct kvm_vcpu *vcpu = filp->private_data; void __user *argp = (void __user *)arg; long r; - int intr; switch (ioctl) { + case KVM_SET_ONE_REG: + case KVM_GET_ONE_REG: { + struct kvm_one_reg reg; + if (copy_from_user(®, argp, sizeof(reg))) + return -EFAULT; + if (ioctl == KVM_SET_ONE_REG) + return kvm_mips_set_reg(vcpu, ®); + else + return kvm_mips_get_reg(vcpu, ®); + } + case KVM_GET_REG_LIST: { + struct kvm_reg_list __user *user_list = argp; + u64 __user *reg_dest; + struct kvm_reg_list reg_list; + unsigned n; + + if (copy_from_user(®_list, user_list, sizeof(reg_list))) + return -EFAULT; + n = reg_list.n; + reg_list.n = ARRAY_SIZE(kvm_mips_get_one_regs); + if (copy_to_user(user_list, ®_list, sizeof(reg_list))) + return -EFAULT; + if (n < reg_list.n) + return -E2BIG; + reg_dest = user_list->reg; + if (copy_to_user(reg_dest, kvm_mips_get_one_regs, + sizeof(kvm_mips_get_one_regs))) + return -EFAULT; + return 0; + } case KVM_NMI: /* Treat the NMI as a CPU reset */ r = kvm_mips_reset_vcpu(vcpu); @@ -505,8 +743,6 @@ kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) if (copy_from_user(&irq, argp, sizeof(irq))) goto out; - intr = (int)irq.irq; - kvm_debug("[%d] %s: irq: %d\n", vcpu->vcpu_id, __func__, irq.irq); @@ -514,7 +750,7 @@ kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) break; } default: - r = -EINVAL; + r = -ENOIOCTLCMD; } out: @@ -627,6 +863,9 @@ int kvm_dev_ioctl_check_extension(long ext) int r; switch (ext) { + case KVM_CAP_ONE_REG: + r = 1; + break; case KVM_CAP_COALESCED_MMIO: r = KVM_COALESCED_MMIO_PAGE_OFFSET; break; @@ -635,7 +874,6 @@ int kvm_dev_ioctl_check_extension(long ext) break; } return r; - } int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) @@ -684,7 +922,7 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) vcpu->arch.lo = regs->lo; vcpu->arch.pc = regs->pc; - return kvm_mips_callbacks->vcpu_ioctl_set_regs(vcpu, regs); + return 0; } int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) @@ -698,7 +936,7 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) regs->lo = vcpu->arch.lo; regs->pc = vcpu->arch.pc; - return kvm_mips_callbacks->vcpu_ioctl_get_regs(vcpu, regs); + return 0; } void kvm_mips_comparecount_func(unsigned long data) diff --git a/arch/mips/kvm/kvm_trap_emul.c b/arch/mips/kvm/kvm_trap_emul.c index 466aeef044bd..30d725321db1 100644 --- a/arch/mips/kvm/kvm_trap_emul.c +++ b/arch/mips/kvm/kvm_trap_emul.c @@ -345,54 +345,6 @@ static int kvm_trap_emul_handle_break(struct kvm_vcpu *vcpu) return ret; } -static int -kvm_trap_emul_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) -{ - struct mips_coproc *cop0 = vcpu->arch.cop0; - - kvm_write_c0_guest_index(cop0, regs->cp0reg[MIPS_CP0_TLB_INDEX][0]); - kvm_write_c0_guest_context(cop0, regs->cp0reg[MIPS_CP0_TLB_CONTEXT][0]); - kvm_write_c0_guest_badvaddr(cop0, regs->cp0reg[MIPS_CP0_BAD_VADDR][0]); - kvm_write_c0_guest_entryhi(cop0, regs->cp0reg[MIPS_CP0_TLB_HI][0]); - kvm_write_c0_guest_epc(cop0, regs->cp0reg[MIPS_CP0_EXC_PC][0]); - - kvm_write_c0_guest_status(cop0, regs->cp0reg[MIPS_CP0_STATUS][0]); - kvm_write_c0_guest_cause(cop0, regs->cp0reg[MIPS_CP0_CAUSE][0]); - kvm_write_c0_guest_pagemask(cop0, - regs->cp0reg[MIPS_CP0_TLB_PG_MASK][0]); - kvm_write_c0_guest_wired(cop0, regs->cp0reg[MIPS_CP0_TLB_WIRED][0]); - kvm_write_c0_guest_errorepc(cop0, regs->cp0reg[MIPS_CP0_ERROR_PC][0]); - - return 0; -} - -static int -kvm_trap_emul_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) -{ - struct mips_coproc *cop0 = vcpu->arch.cop0; - - regs->cp0reg[MIPS_CP0_TLB_INDEX][0] = kvm_read_c0_guest_index(cop0); - regs->cp0reg[MIPS_CP0_TLB_CONTEXT][0] = kvm_read_c0_guest_context(cop0); - regs->cp0reg[MIPS_CP0_BAD_VADDR][0] = kvm_read_c0_guest_badvaddr(cop0); - regs->cp0reg[MIPS_CP0_TLB_HI][0] = kvm_read_c0_guest_entryhi(cop0); - regs->cp0reg[MIPS_CP0_EXC_PC][0] = kvm_read_c0_guest_epc(cop0); - - regs->cp0reg[MIPS_CP0_STATUS][0] = kvm_read_c0_guest_status(cop0); - regs->cp0reg[MIPS_CP0_CAUSE][0] = kvm_read_c0_guest_cause(cop0); - regs->cp0reg[MIPS_CP0_TLB_PG_MASK][0] = - kvm_read_c0_guest_pagemask(cop0); - regs->cp0reg[MIPS_CP0_TLB_WIRED][0] = kvm_read_c0_guest_wired(cop0); - regs->cp0reg[MIPS_CP0_ERROR_PC][0] = kvm_read_c0_guest_errorepc(cop0); - - regs->cp0reg[MIPS_CP0_CONFIG][0] = kvm_read_c0_guest_config(cop0); - regs->cp0reg[MIPS_CP0_CONFIG][1] = kvm_read_c0_guest_config1(cop0); - regs->cp0reg[MIPS_CP0_CONFIG][2] = kvm_read_c0_guest_config2(cop0); - regs->cp0reg[MIPS_CP0_CONFIG][3] = kvm_read_c0_guest_config3(cop0); - regs->cp0reg[MIPS_CP0_CONFIG][7] = kvm_read_c0_guest_config7(cop0); - - return 0; -} - static int kvm_trap_emul_vm_init(struct kvm *kvm) { return 0; @@ -471,8 +423,6 @@ static struct kvm_mips_callbacks kvm_trap_emul_callbacks = { .dequeue_io_int = kvm_mips_dequeue_io_int_cb, .irq_deliver = kvm_mips_irq_deliver_cb, .irq_clear = kvm_mips_irq_clear_cb, - .vcpu_ioctl_get_regs = kvm_trap_emul_ioctl_get_regs, - .vcpu_ioctl_set_regs = kvm_trap_emul_ioctl_set_regs, }; int kvm_mips_emulation_init(struct kvm_mips_callbacks **install_callbacks) From ed829857b36bc0155d85b661ab227df57ac898f3 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 23 May 2013 09:49:10 -0700 Subject: [PATCH 318/429] mips/kvm: Use ENOIOCTLCMD to indicate unimplemented ioctls. The Linux Way is to return -ENOIOCTLCMD to the vfs when an unimplemented ioctl is requested. Do this in kvm_mips instead of a random mixture of -ENOTSUPP and -EINVAL. Signed-off-by: David Daney Acked-by: Sanjay Lal Signed-off-by: Paolo Bonzini --- arch/mips/kvm/kvm_mips.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c index 3caa0062ac1f..d934b017f479 100644 --- a/arch/mips/kvm/kvm_mips.c +++ b/arch/mips/kvm/kvm_mips.c @@ -195,7 +195,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm) long kvm_arch_dev_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { - return -EINVAL; + return -ENOIOCTLCMD; } void kvm_arch_free_memslot(struct kvm_memory_slot *free, @@ -401,7 +401,7 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg) { - return -EINVAL; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) @@ -475,14 +475,14 @@ int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu, struct kvm_mp_state *mp_state) { - return -EINVAL; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, struct kvm_mp_state *mp_state) { - return -EINVAL; + return -ENOIOCTLCMD; } #define KVM_REG_MIPS_CP0_INDEX (0x10000 + 8 * 0 + 0) @@ -801,7 +801,7 @@ long kvm_arch_vm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) switch (ioctl) { default: - r = -EINVAL; + r = -ENOIOCTLCMD; } return r; @@ -829,13 +829,13 @@ void kvm_arch_exit(void) int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs) { - return -ENOTSUPP; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs) { - return -ENOTSUPP; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu) @@ -845,12 +845,12 @@ int kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu) int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) { - return -ENOTSUPP; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) { - return -ENOTSUPP; + return -ENOIOCTLCMD; } int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf) From e8180dcaa8470ceca21109f143876fdcd9fe050a Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Thu, 9 May 2013 00:28:06 +0200 Subject: [PATCH 319/429] ARM: KVM: prevent NULL pointer dereferences with KVM VCPU ioctl Some ARM KVM VCPU ioctls require the vCPU to be properly initialized with the KVM_ARM_VCPU_INIT ioctl before being used with further requests. KVM_RUN checks whether this initialization has been done, but other ioctls do not. Namely KVM_GET_REG_LIST will dereference an array with index -1 without initialization and thus leads to a kernel oops. Fix this by adding checks before executing the ioctl handlers. [ Removed superflous comment from static function - Christoffer ] Changes from v1: * moved check into a static function with a meaningful name Signed-off-by: Andre Przywara Signed-off-by: Christoffer Dall --- arch/arm/kvm/arm.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 37d216d814cd..ef1703b9587b 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -492,6 +492,11 @@ static void vcpu_pause(struct kvm_vcpu *vcpu) wait_event_interruptible(*wq, !vcpu->arch.pause); } +static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.target >= 0; +} + /** * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code * @vcpu: The VCPU pointer @@ -508,8 +513,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) int ret; sigset_t sigsaved; - /* Make sure they initialize the vcpu with KVM_ARM_VCPU_INIT */ - if (unlikely(vcpu->arch.target < 0)) + if (unlikely(!kvm_vcpu_initialized(vcpu))) return -ENOEXEC; ret = kvm_vcpu_first_run_init(vcpu); @@ -710,6 +714,10 @@ long kvm_arch_vcpu_ioctl(struct file *filp, case KVM_SET_ONE_REG: case KVM_GET_ONE_REG: { struct kvm_one_reg reg; + + if (unlikely(!kvm_vcpu_initialized(vcpu))) + return -ENOEXEC; + if (copy_from_user(®, argp, sizeof(reg))) return -EFAULT; if (ioctl == KVM_SET_ONE_REG) @@ -722,6 +730,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp, struct kvm_reg_list reg_list; unsigned n; + if (unlikely(!kvm_vcpu_initialized(vcpu))) + return -ENOEXEC; + if (copy_from_user(®_list, user_list, sizeof(reg_list))) return -EFAULT; n = reg_list.n; From d4cb9df5d1f79950b34e78ec5d1b1b59d6e9c7b7 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 14 May 2013 12:11:34 +0100 Subject: [PATCH 320/429] ARM: KVM: be more thorough when invalidating TLBs The KVM/ARM MMU code doesn't take care of invalidating TLBs before freeing a {pte,pmd} table. This could cause problems if the page is reallocated and then speculated into by another CPU. Reported-by: Catalin Marinas Signed-off-by: Marc Zyngier Acked-by: Catalin Marinas Signed-off-by: Christoffer Dall --- arch/arm/kvm/mmu.c | 41 ++++++++++++++++++++++++++--------------- 1 file changed, 26 insertions(+), 15 deletions(-) diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 965706578f13..84ba67b982c0 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -43,7 +43,14 @@ static phys_addr_t hyp_idmap_vector; static void kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) { - kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa); + /* + * This function also gets called when dealing with HYP page + * tables. As HYP doesn't have an associated struct kvm (and + * the HYP page tables are fairly static), we don't do + * anything there. + */ + if (kvm) + kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, kvm, ipa); } static int mmu_topup_memory_cache(struct kvm_mmu_memory_cache *cache, @@ -78,18 +85,20 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc) return p; } -static void clear_pud_entry(pud_t *pud) +static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr) { pmd_t *pmd_table = pmd_offset(pud, 0); pud_clear(pud); + kvm_tlb_flush_vmid_ipa(kvm, addr); pmd_free(NULL, pmd_table); put_page(virt_to_page(pud)); } -static void clear_pmd_entry(pmd_t *pmd) +static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr) { pte_t *pte_table = pte_offset_kernel(pmd, 0); pmd_clear(pmd); + kvm_tlb_flush_vmid_ipa(kvm, addr); pte_free_kernel(NULL, pte_table); put_page(virt_to_page(pmd)); } @@ -100,11 +109,12 @@ static bool pmd_empty(pmd_t *pmd) return page_count(pmd_page) == 1; } -static void clear_pte_entry(pte_t *pte) +static void clear_pte_entry(struct kvm *kvm, pte_t *pte, phys_addr_t addr) { if (pte_present(*pte)) { kvm_set_pte(pte, __pte(0)); put_page(virt_to_page(pte)); + kvm_tlb_flush_vmid_ipa(kvm, addr); } } @@ -114,7 +124,8 @@ static bool pte_empty(pte_t *pte) return page_count(pte_page) == 1; } -static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size) +static void unmap_range(struct kvm *kvm, pgd_t *pgdp, + unsigned long long start, u64 size) { pgd_t *pgd; pud_t *pud; @@ -138,15 +149,15 @@ static void unmap_range(pgd_t *pgdp, unsigned long long start, u64 size) } pte = pte_offset_kernel(pmd, addr); - clear_pte_entry(pte); + clear_pte_entry(kvm, pte, addr); range = PAGE_SIZE; /* If we emptied the pte, walk back up the ladder */ if (pte_empty(pte)) { - clear_pmd_entry(pmd); + clear_pmd_entry(kvm, pmd, addr); range = PMD_SIZE; if (pmd_empty(pmd)) { - clear_pud_entry(pud); + clear_pud_entry(kvm, pud, addr); range = PUD_SIZE; } } @@ -165,14 +176,14 @@ void free_boot_hyp_pgd(void) mutex_lock(&kvm_hyp_pgd_mutex); if (boot_hyp_pgd) { - unmap_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); - unmap_range(boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); + unmap_range(NULL, boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); + unmap_range(NULL, boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); kfree(boot_hyp_pgd); boot_hyp_pgd = NULL; } if (hyp_pgd) - unmap_range(hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); + unmap_range(NULL, hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); kfree(init_bounce_page); init_bounce_page = NULL; @@ -200,9 +211,10 @@ void free_hyp_pgds(void) if (hyp_pgd) { for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE) - unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE) - unmap_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + unmap_range(NULL, hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + kfree(hyp_pgd); hyp_pgd = NULL; } @@ -393,7 +405,7 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm) */ static void unmap_stage2_range(struct kvm *kvm, phys_addr_t start, u64 size) { - unmap_range(kvm->arch.pgd, start, size); + unmap_range(kvm, kvm->arch.pgd, start, size); } /** @@ -675,7 +687,6 @@ static void handle_hva_to_gpa(struct kvm *kvm, static void kvm_unmap_hva_handler(struct kvm *kvm, gpa_t gpa, void *data) { unmap_stage2_range(kvm, gpa, PAGE_SIZE); - kvm_tlb_flush_vmid_ipa(kvm, gpa); } int kvm_unmap_hva(struct kvm *kvm, unsigned long hva) From 103f98ea64a1b0a67d8a1b23070b4db3533db2b8 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 30 May 2013 13:22:39 +0200 Subject: [PATCH 321/429] KVM: Emulate multibyte NOP This is encountered when booting RHEL5.9 64-bit. There is another bug after this one that is not a simple emulation failure, but this one lets the boot proceed a bit. Cc: # 3.9 Signed-off-by: Paolo Bonzini Signed-off-by: Gleb Natapov --- arch/x86/kvm/emulate.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 8db0010ed150..0f42c2a48166 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -3997,7 +3997,8 @@ static const struct opcode twobyte_table[256] = { DI(ImplicitOps | Priv, invd), DI(ImplicitOps | Priv, wbinvd), N, N, N, D(ImplicitOps | ModRM), N, N, /* 0x10 - 0x1F */ - N, N, N, N, N, N, N, N, D(ImplicitOps | ModRM), N, N, N, N, N, N, N, + N, N, N, N, N, N, N, N, + D(ImplicitOps | ModRM), N, N, N, N, N, N, D(ImplicitOps | ModRM), /* 0x20 - 0x2F */ DIP(ModRM | DstMem | Priv | Op3264, cr_read, check_cr_read), DIP(ModRM | DstMem | Priv | Op3264, dr_read, check_dr_read), @@ -4836,6 +4837,7 @@ twobyte_insn: case 0x08: /* invd */ case 0x0d: /* GrpP (prefetch) */ case 0x18: /* Grp16 (prefetch/nop) */ + case 0x1f: /* nop */ break; case 0x20: /* mov cr, reg */ ctxt->dst.val = ops->get_cr(ctxt, ctxt->modrm_reg); From 8acb42070ec4c87a9baab5c7bac626030d5bef28 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 30 May 2013 16:35:55 +0200 Subject: [PATCH 322/429] KVM: fix sil/dil/bpl/spl in the mod/rm fields The x86-64 extended low-byte registers were fetched correctly from reg, but not from mod/rm. This fixes another bug in the boot of RHEL5.9 64-bit, but it is still not enough. Cc: # 3.9 Signed-off-by: Paolo Bonzini Signed-off-by: Gleb Natapov --- arch/x86/kvm/emulate.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 0f42c2a48166..5953dcea752d 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -1240,9 +1240,12 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt, ctxt->modrm_seg = VCPU_SREG_DS; if (ctxt->modrm_mod == 3) { + int highbyte_regs = ctxt->rex_prefix == 0; + op->type = OP_REG; op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes; - op->addr.reg = decode_register(ctxt, ctxt->modrm_rm, ctxt->d & ByteOp); + op->addr.reg = decode_register(ctxt, ctxt->modrm_rm, + highbyte_regs && (ctxt->d & ByteOp)); if (ctxt->d & Sse) { op->type = OP_XMM; op->bytes = 16; From 299018f44ac553dce3caf84df1d14c4764faa279 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Mon, 3 Jun 2013 11:30:02 +0300 Subject: [PATCH 323/429] KVM: Fix race in apic->pending_events processing apic->pending_events processing has a race that may cause INIT and SIPI processing to be reordered: vpu0: vcpu1: set INIT test_and_clear_bit(KVM_APIC_INIT) process INIT set INIT set SIPI test_and_clear_bit(KVM_APIC_SIPI) process SIPI At the end INIT is left pending in pending_events. The following patch fixes this by latching pending event before processing them. Signed-off-by: Gleb Natapov --- arch/x86/kvm/lapic.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index e1adbb4aca75..0eee2c8b64d1 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -1861,11 +1861,14 @@ void kvm_apic_accept_events(struct kvm_vcpu *vcpu) { struct kvm_lapic *apic = vcpu->arch.apic; unsigned int sipi_vector; + unsigned long pe; - if (!kvm_vcpu_has_lapic(vcpu)) + if (!kvm_vcpu_has_lapic(vcpu) || !apic->pending_events) return; - if (test_and_clear_bit(KVM_APIC_INIT, &apic->pending_events)) { + pe = xchg(&apic->pending_events, 0); + + if (test_bit(KVM_APIC_INIT, &pe)) { kvm_lapic_reset(vcpu); kvm_vcpu_reset(vcpu); if (kvm_vcpu_is_bsp(apic->vcpu)) @@ -1873,7 +1876,7 @@ void kvm_apic_accept_events(struct kvm_vcpu *vcpu) else vcpu->arch.mp_state = KVM_MP_STATE_INIT_RECEIVED; } - if (test_and_clear_bit(KVM_APIC_SIPI, &apic->pending_events) && + if (test_bit(KVM_APIC_SIPI, &pe) && vcpu->arch.mp_state == KVM_MP_STATE_INIT_RECEIVED) { /* evaluate pending_events before reading the vector */ smp_rmb(); From 8706a6b6303dd75c7ee2baf2161de0f5a2fbdd8b Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 30 May 2013 15:10:52 +0200 Subject: [PATCH 324/429] microblaze: Fix sparse warnings arch/microblaze/include/asm/uaccess.h:101:3: warning: cast removes address space of expression arch/microblaze/include/asm/uaccess.h:107:2: warning: cast removes address space of expression Signed-off-by: Michal Simek --- arch/microblaze/include/asm/uaccess.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h index efe59d881789..04e49553bdf9 100644 --- a/arch/microblaze/include/asm/uaccess.h +++ b/arch/microblaze/include/asm/uaccess.h @@ -99,13 +99,13 @@ static inline int access_ok(int type, const void __user *addr, if ((get_fs().seg < ((unsigned long)addr)) || (get_fs().seg < ((unsigned long)addr + size - 1))) { pr_debug("ACCESS fail: %s at 0x%08x (size 0x%x), seg 0x%08x\n", - type ? "WRITE" : "READ ", (u32)addr, (u32)size, + type ? "WRITE" : "READ ", (__force u32)addr, (u32)size, (u32)get_fs().seg); return 0; } ok: pr_debug("ACCESS OK: %s at 0x%08x (size 0x%x), seg 0x%08x\n", - type ? "WRITE" : "READ ", (u32)addr, (u32)size, + type ? "WRITE" : "READ ", (__force u32)addr, (u32)size, (u32)get_fs().seg); return 1; } From b7ea85a4fed37835eec78a7be3039c8dc22b8178 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Tue, 21 May 2013 06:23:43 +0000 Subject: [PATCH 325/429] drm: fix a use-after-free when GPU acceleration disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When GPU acceleration is disabled, drm_vblank_cleanup() will free the vblank-related data, such as vblank_refcount, vblank_inmodeset, etc. But we found that drm_vblank_post_modeset() may be called after the cleanup, which use vblank_refcount and vblank_inmodeset. And this will cause a kernel panic. Fix this by return immediately if dev->num_crtcs is zero. This is the same thing that drm_vblank_pre_modeset() does. Call trace of a drm_vblank_post_modeset() after drm_vblank_cleanup(): [ 62.628906] [] drm_vblank_post_modeset+0x34/0xb4 [ 62.628906] [] atombios_crtc_dpms+0xb4/0x174 [ 62.628906] [] atombios_crtc_commit+0x18/0x38 [ 62.628906] [] drm_crtc_helper_set_mode+0x304/0x3cc [ 62.628906] [] drm_crtc_helper_set_config+0x6d8/0x988 [ 62.628906] [] drm_fb_helper_set_par+0x94/0x104 [ 62.628906] [] fbcon_init+0x424/0x57c [ 62.628906] [] visual_init+0xb8/0x118 [ 62.628906] [] take_over_console+0x238/0x384 [ 62.628906] [] fbcon_takeover+0x7c/0xdc [ 62.628906] [] notifier_call_chain+0x44/0x94 [ 62.628906] [] __blocking_notifier_call_chain+0x48/0x68 [ 62.628906] [] register_framebuffer+0x228/0x260 [ 62.628906] [] drm_fb_helper_single_fb_probe+0x260/0x314 [ 62.628906] [] drm_fb_helper_initial_config+0x200/0x234 [ 62.628906] [] radeon_fbdev_init+0xd4/0xf4 [ 62.628906] [] radeon_modeset_init+0x9bc/0xa18 [ 62.628906] [] radeon_driver_load_kms+0xdc/0x12c [ 62.628906] [] drm_get_pci_dev+0x148/0x238 [ 62.628906] [] local_pci_probe+0x5c/0xd0 [ 62.628906] [] work_for_cpu_fn+0x1c/0x30 [ 62.628906] [] process_one_work+0x274/0x3bc [ 62.628906] [] process_scheduled_works+0x24/0x44 [ 62.628906] [] worker_thread+0x31c/0x3f4 [ 62.628906] [] kthread+0x88/0x90 [ 62.628906] [] kernel_thread_helper+0x10/0x18 Signed-off-by: Huacai Chen Signed-off-by: Binbin Zhou Cc: Reviewed-by: Michel Dänzer Acked-by: Paul Menzel Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index a6a8643a6a77..8bcce7866d36 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -1054,7 +1054,7 @@ EXPORT_SYMBOL(drm_vblank_off); */ void drm_vblank_pre_modeset(struct drm_device *dev, int crtc) { - /* vblank is not initialized (IRQ not installed ?) */ + /* vblank is not initialized (IRQ not installed ?), or has been freed */ if (!dev->num_crtcs) return; /* @@ -1076,6 +1076,10 @@ void drm_vblank_post_modeset(struct drm_device *dev, int crtc) { unsigned long irqflags; + /* vblank is not initialized (IRQ not installed ?), or has been freed */ + if (!dev->num_crtcs) + return; + if (dev->vblank_inmodeset[crtc]) { spin_lock_irqsave(&dev->vbl_lock, irqflags); dev->vblank_disable_allowed = 1; From 1ed7fad6dbb211142cb61169d8d0bbbb049d4de1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 31 May 2013 22:22:47 +0000 Subject: [PATCH 326/429] drm/tilcd: select BACKLIGHT_LCD_SUPPORT The dependecies for BACKLIGHT_CLASS_DEVICE are defined a bit strange, but it seems one has to always select both BACKLIGHT_CLASS_DEVICE and BACKLIGHT_LCD_SUPPORT to avoid this error: drivers/gpu/drm/tilcdc/tilcdc_panel.c:396: undefined reference to `of_find_backlight_by_node' Cc: Rob Clark Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie Signed-off-by: Arnd Bergmann Signed-off-by: Dave Airlie --- drivers/gpu/drm/tilcdc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/tilcdc/Kconfig b/drivers/gpu/drm/tilcdc/Kconfig index e461e9972455..7a4d10106906 100644 --- a/drivers/gpu/drm/tilcdc/Kconfig +++ b/drivers/gpu/drm/tilcdc/Kconfig @@ -6,6 +6,7 @@ config DRM_TILCDC select DRM_GEM_CMA_HELPER select VIDEOMODE_HELPERS select BACKLIGHT_CLASS_DEVICE + select BACKLIGHT_LCD_SUPPORT help Choose this option if you have an TI SoC with LCDC display controller, for example AM33xx in beagle-bone, DA8xx, or From b06f6a9d06f4b0fa38bd3e32714106d824470813 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 31 May 2013 22:22:40 +0000 Subject: [PATCH 327/429] drm/nouveau: use mdelay instead of large udelay constants ARM cannot handle udelay for more than 2 miliseconds, so we should use mdelay instead for those. Signed-off-by: Arnd Bergmann Cc: David Airlie Cc: Ben Skeggs Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c index d0817d94454c..ed7415e5e220 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c @@ -51,7 +51,8 @@ nv50_dac_sense(struct nv50_disp_priv *priv, int or, u32 loadval) const u32 doff = (or * 0x800); int load = -EINVAL; nv_wr32(priv, 0x61a00c + doff, 0x00100000 | loadval); - udelay(9500); + mdelay(9); + udelay(500); nv_wr32(priv, 0x61a00c + doff, 0x80000000); load = (nv_rd32(priv, 0x61a00c + doff) & 0x38000000) >> 27; nv_wr32(priv, 0x61a00c + doff, 0x00000000); From 91f8f105f2b82b4a38dee2d74760bc39d40ec42c Mon Sep 17 00:00:00 2001 From: Christopher Harvey Date: Fri, 31 May 2013 20:33:07 +0000 Subject: [PATCH 328/429] drm/mgag200: Add missing write to index before accessing data register This is a bug fix for some versions of g200se cards while doing mode-setting. Signed-off-by: Christopher Harvey Tested-by: Julia Lemire Acked-by: Julia Lemire Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/mgag200/mgag200_mode.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c index 77b8a45fb10a..ee66badc8bb6 100644 --- a/drivers/gpu/drm/mgag200/mgag200_mode.c +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c @@ -1034,13 +1034,14 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc, else hi_pri_lvl = 5; - WREG8(0x1fde, 0x06); - WREG8(0x1fdf, hi_pri_lvl); + WREG8(MGAREG_CRTCEXT_INDEX, 0x06); + WREG8(MGAREG_CRTCEXT_DATA, hi_pri_lvl); } else { + WREG8(MGAREG_CRTCEXT_INDEX, 0x06); if (mdev->reg_1e24 >= 0x01) - WREG8(0x1fdf, 0x03); + WREG8(MGAREG_CRTCEXT_DATA, 0x03); else - WREG8(0x1fdf, 0x04); + WREG8(MGAREG_CRTCEXT_DATA, 0x04); } } return 0; From 087c2e3b4e062573dbbc8a50b9208992e3768dcf Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 31 May 2013 13:54:10 +0200 Subject: [PATCH 329/429] ALSA: hda/via - Disable broken dynamic power control Since the transition to the generic parser, the actual routes used there don't match always with the assumed static paths in some set_widgets_power_state callbacks. This results in the wrong power setup in the end. As a temporary workaround, we need to disable the calls together with the non-functional dynamic power control enum. Reported-by: Alex Riesen Cc: [v3.9] Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_via.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index e0dadcf2030d..75fdb51345a7 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -231,9 +231,14 @@ static void vt1708_update_hp_work(struct hda_codec *codec) static void set_widgets_power_state(struct hda_codec *codec) { +#if 0 /* FIXME: the assumed connections don't match always with the + * actual routes by the generic parser, so better to disable + * the control for safety. + */ struct via_spec *spec = codec->spec; if (spec->set_widgets_power_state) spec->set_widgets_power_state(codec); +#endif } static void update_power_state(struct hda_codec *codec, hda_nid_t nid, From 77afe0e94884ae40de29cd813a1fb7ddee583591 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 31 May 2013 14:10:03 +0200 Subject: [PATCH 330/429] ALSA: hda - Allow setting automute/automic hooks after parsing Some codec drivers (VIA codecs and some Realtek fixups) set the automute and automic hooks after calling snd_hda_gen_parse_auto_config(). In the current code, the hook pointers are referred only in snd_hda_gen_parse_auto_config() and passed to snd_hda_jack_detect_enable_callback(), thus changing the hook values won't change the actually called callbacks properly. This patch fixes this bug by setting the static functions as the primary callback functions for the jack detection, and let them calling the appropriate hooks dynamically. Cc: [v3.9] Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_generic.c | 42 +++++++++++++++++++++++++++++-------- 1 file changed, 33 insertions(+), 9 deletions(-) diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index ae85bbd2e6f8..fbc10b60be01 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -3875,6 +3875,36 @@ static void update_automute_all(struct hda_codec *codec) snd_hda_gen_mic_autoswitch(codec, NULL); } +/* call appropriate hooks */ +static void call_hp_automute(struct hda_codec *codec, struct hda_jack_tbl *jack) +{ + struct hda_gen_spec *spec = codec->spec; + if (spec->hp_automute_hook) + spec->hp_automute_hook(codec, jack); + else + snd_hda_gen_hp_automute(codec, jack); +} + +static void call_line_automute(struct hda_codec *codec, + struct hda_jack_tbl *jack) +{ + struct hda_gen_spec *spec = codec->spec; + if (spec->line_automute_hook) + spec->line_automute_hook(codec, jack); + else + snd_hda_gen_line_automute(codec, jack); +} + +static void call_mic_autoswitch(struct hda_codec *codec, + struct hda_jack_tbl *jack) +{ + struct hda_gen_spec *spec = codec->spec; + if (spec->mic_autoswitch_hook) + spec->mic_autoswitch_hook(codec, jack); + else + snd_hda_gen_mic_autoswitch(codec, jack); +} + /* * Auto-Mute mode mixer enum support */ @@ -4009,9 +4039,7 @@ static int check_auto_mute_availability(struct hda_codec *codec) snd_printdd("hda-codec: Enable HP auto-muting on NID 0x%x\n", nid); snd_hda_jack_detect_enable_callback(codec, nid, HDA_GEN_HP_EVENT, - spec->hp_automute_hook ? - spec->hp_automute_hook : - snd_hda_gen_hp_automute); + call_hp_automute); spec->detect_hp = 1; } @@ -4024,9 +4052,7 @@ static int check_auto_mute_availability(struct hda_codec *codec) snd_printdd("hda-codec: Enable Line-Out auto-muting on NID 0x%x\n", nid); snd_hda_jack_detect_enable_callback(codec, nid, HDA_GEN_FRONT_EVENT, - spec->line_automute_hook ? - spec->line_automute_hook : - snd_hda_gen_line_automute); + call_line_automute); spec->detect_lo = 1; } spec->automute_lo_possible = spec->detect_hp; @@ -4068,9 +4094,7 @@ static bool auto_mic_check_imux(struct hda_codec *codec) snd_hda_jack_detect_enable_callback(codec, spec->am_entry[i].pin, HDA_GEN_MIC_EVENT, - spec->mic_autoswitch_hook ? - spec->mic_autoswitch_hook : - snd_hda_gen_mic_autoswitch); + call_mic_autoswitch); return true; } From 05909d5c679cf7c9a8a5bc663677c066a546894f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 31 May 2013 19:55:54 +0200 Subject: [PATCH 331/429] ALSA: hda - Add keep_eapd_on flag to generic parser VT1802 codec seems to reset EAPD of other pins in the hardware level, and this was another reason of the silent headphone output on some machines. As a workaround, introduce a new flag indicating to keep the EPAD on to the generic parser, and set it in patch_via.c. Reported-by: Alex Riesen Cc: [v3.9] Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_generic.c | 2 ++ sound/pci/hda/hda_generic.h | 1 + sound/pci/hda/patch_via.c | 1 + 3 files changed, 4 insertions(+) diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index fbc10b60be01..cfdb917d74fb 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -788,6 +788,8 @@ static void set_pin_eapd(struct hda_codec *codec, hda_nid_t pin, bool enable) return; if (codec->inv_eapd) enable = !enable; + if (spec->keep_eapd_on && !enable) + return; snd_hda_codec_update_cache(codec, pin, 0, AC_VERB_SET_EAPD_BTLENABLE, enable ? 0x02 : 0x00); diff --git a/sound/pci/hda/hda_generic.h b/sound/pci/hda/hda_generic.h index 54e665160379..76200314ee95 100644 --- a/sound/pci/hda/hda_generic.h +++ b/sound/pci/hda/hda_generic.h @@ -222,6 +222,7 @@ struct hda_gen_spec { unsigned int multi_cap_vol:1; /* allow multiple capture xxx volumes */ unsigned int inv_dmic_split:1; /* inverted dmic w/a for conexant */ unsigned int own_eapd_ctl:1; /* set EAPD by own function */ + unsigned int keep_eapd_on:1; /* don't turn off EAPD automatically */ unsigned int vmaster_mute_enum:1; /* add vmaster mute mode enum */ unsigned int indep_hp:1; /* independent HP supported */ unsigned int prefer_hp_amp:1; /* enable HP amp for speaker if any */ diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index 75fdb51345a7..a6c38568c9d5 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -136,6 +136,7 @@ static struct via_spec *via_new_spec(struct hda_codec *codec) spec->codec_type = VT1708S; spec->no_pin_power_ctl = 1; spec->gen.indep_hp = 1; + spec->gen.keep_eapd_on = 1; spec->gen.pcm_playback_hook = via_playback_pcm_hook; return spec; } From 5a6f294e87974e6ec68d7113553ffd975d83bf15 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 3 Jun 2013 11:17:38 +0200 Subject: [PATCH 332/429] ALSA: hda/via - Fix wrongly cleared pins after suspend on VT1802 VIA driver has a special suspend handling only for VT1802 to reduce the pop noise. During the transition to the generic parser, the behavior of snd_hda_set_pin_ctl() was also changed to modify the cached values, too. And this caused a regression where the pin is still cleared even after the resume (including the resume from power save), resulting in the silent output. The fix is simply to replace snd_hda_set_pin_ctl() with the explicit call of snd_hda_codec_write() again. Reported-by: Alex Riesen Cc: [v3.9] Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_via.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index a6c38568c9d5..e5245544eb52 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -484,7 +484,9 @@ static int via_suspend(struct hda_codec *codec) /* Fix pop noise on headphones */ int i; for (i = 0; i < spec->gen.autocfg.hp_outs; i++) - snd_hda_set_pin_ctl(codec, spec->gen.autocfg.hp_pins[i], 0); + snd_hda_codec_write(codec, spec->gen.autocfg.hp_pins[i], + 0, AC_VERB_SET_PIN_WIDGET_CONTROL, + 0x00); } return 0; From 62bc82a82bb1e2b5ee5048c088af7260ddb2b7b5 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 3 Jun 2013 11:30:04 +0200 Subject: [PATCH 333/429] microblaze: Use static inline functions in cacheflush.h Using static inline functions ensure proper type checking which also remove compilation warning for no MMU Compilation warning: arch/microblaze/include/asm/cacheflush.h: warning: 'addr' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Michal Simek --- arch/microblaze/include/asm/cacheflush.h | 32 +++++++++++++----------- 1 file changed, 17 insertions(+), 15 deletions(-) diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h index 0f553bc009a0..ffea82a16d2c 100644 --- a/arch/microblaze/include/asm/cacheflush.h +++ b/arch/microblaze/include/asm/cacheflush.h @@ -102,21 +102,23 @@ do { \ #define flush_cache_range(vma, start, len) do { } while (0) -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ -do { \ - u32 addr = virt_to_phys(dst); \ - memcpy((dst), (src), (len)); \ - if (vma->vm_flags & VM_EXEC) { \ - invalidate_icache_range((unsigned) (addr), \ - (unsigned) (addr) + PAGE_SIZE); \ - flush_dcache_range((unsigned) (addr), \ - (unsigned) (addr) + PAGE_SIZE); \ - } \ -} while (0) +static inline void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, + void *dst, void *src, int len) +{ + u32 addr = virt_to_phys(dst); + memcpy(dst, src, len); + if (vma->vm_flags & VM_EXEC) { + invalidate_icache_range(addr, addr + PAGE_SIZE); + flush_dcache_range(addr, addr + PAGE_SIZE); + } +} -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ -do { \ - memcpy((dst), (src), (len)); \ -} while (0) +static inline void copy_from_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, + void *dst, void *src, int len) +{ + memcpy(dst, src, len); +} #endif /* _ASM_MICROBLAZE_CACHEFLUSH_H */ From 963afde9509c4bef1b06be7117d018a8da26480a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 31 May 2013 15:20:31 +0200 Subject: [PATCH 334/429] ALSA: hda/via - Clean up duplicated codes The previous commit was written in the way to make the backport to 3.9.y easier, and left the duplicated open codes intentionally. Now let's clean up the duplicated codes. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_generic.c | 42 +++++++++++-------------------------- 1 file changed, 12 insertions(+), 30 deletions(-) diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index cfdb917d74fb..4b1524a861f3 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -1940,17 +1940,7 @@ static int create_speaker_out_ctls(struct hda_codec *codec) * independent HP controls */ -/* update HP auto-mute state too */ -static void update_hp_automute_hook(struct hda_codec *codec) -{ - struct hda_gen_spec *spec = codec->spec; - - if (spec->hp_automute_hook) - spec->hp_automute_hook(codec, NULL); - else - snd_hda_gen_hp_automute(codec, NULL); -} - +static void call_hp_automute(struct hda_codec *codec, struct hda_jack_tbl *jack); static int indep_hp_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { @@ -2011,7 +2001,7 @@ static int indep_hp_put(struct snd_kcontrol *kcontrol, else *dacp = spec->alt_dac_nid; - update_hp_automute_hook(codec); + call_hp_automute(codec, NULL); ret = 1; } unlock: @@ -2307,7 +2297,7 @@ static void update_hp_mic(struct hda_codec *codec, int adc_mux, bool force) else val = PIN_HP; set_pin_target(codec, pin, val, true); - update_hp_automute_hook(codec); + call_hp_automute(codec, NULL); } } @@ -2716,7 +2706,7 @@ static int hp_mic_jack_mode_put(struct snd_kcontrol *kcontrol, val = snd_hda_get_default_vref(codec, nid); } snd_hda_set_pin_ctl_cache(codec, nid, val); - update_hp_automute_hook(codec); + call_hp_automute(codec, NULL); return 1; } @@ -3861,22 +3851,6 @@ void snd_hda_gen_mic_autoswitch(struct hda_codec *codec, struct hda_jack_tbl *ja } EXPORT_SYMBOL_HDA(snd_hda_gen_mic_autoswitch); -/* update jack retasking */ -static void update_automute_all(struct hda_codec *codec) -{ - struct hda_gen_spec *spec = codec->spec; - - update_hp_automute_hook(codec); - if (spec->line_automute_hook) - spec->line_automute_hook(codec, NULL); - else - snd_hda_gen_line_automute(codec, NULL); - if (spec->mic_autoswitch_hook) - spec->mic_autoswitch_hook(codec, NULL); - else - snd_hda_gen_mic_autoswitch(codec, NULL); -} - /* call appropriate hooks */ static void call_hp_automute(struct hda_codec *codec, struct hda_jack_tbl *jack) { @@ -3907,6 +3881,14 @@ static void call_mic_autoswitch(struct hda_codec *codec, snd_hda_gen_mic_autoswitch(codec, jack); } +/* update jack retasking */ +static void update_automute_all(struct hda_codec *codec) +{ + call_hp_automute(codec, NULL); + call_line_automute(codec, NULL); + call_mic_autoswitch(codec, NULL); +} + /* * Auto-Mute mode mixer enum support */ From a90f13b24fb40d02d11496cce6a10ae8d4b319b2 Mon Sep 17 00:00:00 2001 From: Jonas Peterson Date: Tue, 7 May 2013 22:05:23 +0200 Subject: [PATCH 335/429] net: can: kvaser_usb: fix reception on "USBcan Pro" and "USBcan R" type hardware. Unlike Kvaser Leaf light devices, some other Kvaser devices (like USBcan Pro, USBcan R) receive CAN messages in CMD_LOG_MESSAGE frames. This patch adds support for it. Cc: linux-stable # >= v3.8 Signed-off-by: Jonas Peterson Signed-off-by: Olivier Sobrie Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/kvaser_usb.c | 64 +++++++++++++++++++++----------- 1 file changed, 43 insertions(+), 21 deletions(-) diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c index 45cb9f3c1324..3b9546588240 100644 --- a/drivers/net/can/usb/kvaser_usb.c +++ b/drivers/net/can/usb/kvaser_usb.c @@ -136,6 +136,9 @@ #define KVASER_CTRL_MODE_SELFRECEPTION 3 #define KVASER_CTRL_MODE_OFF 4 +/* log message */ +#define KVASER_EXTENDED_FRAME BIT(31) + struct kvaser_msg_simple { u8 tid; u8 channel; @@ -817,8 +820,13 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev, priv = dev->nets[channel]; stats = &priv->netdev->stats; - if (msg->u.rx_can.flag & (MSG_FLAG_ERROR_FRAME | MSG_FLAG_NERR | - MSG_FLAG_OVERRUN)) { + if ((msg->u.rx_can.flag & MSG_FLAG_ERROR_FRAME) && + (msg->id == CMD_LOG_MESSAGE)) { + kvaser_usb_rx_error(dev, msg); + return; + } else if (msg->u.rx_can.flag & (MSG_FLAG_ERROR_FRAME | + MSG_FLAG_NERR | + MSG_FLAG_OVERRUN)) { kvaser_usb_rx_can_err(priv, msg); return; } else if (msg->u.rx_can.flag & ~MSG_FLAG_REMOTE_FRAME) { @@ -834,23 +842,41 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev, return; } - cf->can_id = ((msg->u.rx_can.msg[0] & 0x1f) << 6) | - (msg->u.rx_can.msg[1] & 0x3f); - cf->can_dlc = get_can_dlc(msg->u.rx_can.msg[5]); + if (msg->id == CMD_LOG_MESSAGE) { + cf->can_id = le32_to_cpu(msg->u.log_message.id); + if (cf->can_id & KVASER_EXTENDED_FRAME) + cf->can_id &= CAN_EFF_MASK | CAN_EFF_FLAG; + else + cf->can_id &= CAN_SFF_MASK; - if (msg->id == CMD_RX_EXT_MESSAGE) { - cf->can_id <<= 18; - cf->can_id |= ((msg->u.rx_can.msg[2] & 0x0f) << 14) | - ((msg->u.rx_can.msg[3] & 0xff) << 6) | - (msg->u.rx_can.msg[4] & 0x3f); - cf->can_id |= CAN_EFF_FLAG; + cf->can_dlc = get_can_dlc(msg->u.log_message.dlc); + + if (msg->u.log_message.flags & MSG_FLAG_REMOTE_FRAME) + cf->can_id |= CAN_RTR_FLAG; + else + memcpy(cf->data, &msg->u.log_message.data, + cf->can_dlc); + } else { + cf->can_id = ((msg->u.rx_can.msg[0] & 0x1f) << 6) | + (msg->u.rx_can.msg[1] & 0x3f); + + if (msg->id == CMD_RX_EXT_MESSAGE) { + cf->can_id <<= 18; + cf->can_id |= ((msg->u.rx_can.msg[2] & 0x0f) << 14) | + ((msg->u.rx_can.msg[3] & 0xff) << 6) | + (msg->u.rx_can.msg[4] & 0x3f); + cf->can_id |= CAN_EFF_FLAG; + } + + cf->can_dlc = get_can_dlc(msg->u.rx_can.msg[5]); + + if (msg->u.rx_can.flag & MSG_FLAG_REMOTE_FRAME) + cf->can_id |= CAN_RTR_FLAG; + else + memcpy(cf->data, &msg->u.rx_can.msg[6], + cf->can_dlc); } - if (msg->u.rx_can.flag & MSG_FLAG_REMOTE_FRAME) - cf->can_id |= CAN_RTR_FLAG; - else - memcpy(cf->data, &msg->u.rx_can.msg[6], cf->can_dlc); - netif_rx(skb); stats->rx_packets++; @@ -911,6 +937,7 @@ static void kvaser_usb_handle_message(const struct kvaser_usb *dev, case CMD_RX_STD_MESSAGE: case CMD_RX_EXT_MESSAGE: + case CMD_LOG_MESSAGE: kvaser_usb_rx_can_msg(dev, msg); break; @@ -919,11 +946,6 @@ static void kvaser_usb_handle_message(const struct kvaser_usb *dev, kvaser_usb_rx_error(dev, msg); break; - case CMD_LOG_MESSAGE: - if (msg->u.log_message.flags & MSG_FLAG_ERROR_FRAME) - kvaser_usb_rx_error(dev, msg); - break; - case CMD_TX_ACKNOWLEDGE: kvaser_usb_tx_acknowledge(dev, msg); break; From fae37f81fdf3680c5d70abdc57e7b83f4b6c266a Mon Sep 17 00:00:00 2001 From: Olivier Sobrie Date: Fri, 18 Jan 2013 09:14:04 +0100 Subject: [PATCH 336/429] net: can: esd_usb2: Do not do dma on the stack smatch reports the following warnings: drivers/net/can/usb/esd_usb2.c:640 esd_usb2_start() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:846 esd_usb2_close() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:855 esd_usb2_close() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:923 esd_usb2_set_bittiming() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:1047 esd_usb2_probe() error: doing dma on the stack (&msg) drivers/net/can/usb/esd_usb2.c:1053 esd_usb2_probe() error: doing dma on the stack (&msg) See "Documentation/DMA-API-HOWTO.txt" section "What memory is DMA'able?" Signed-off-by: Olivier Sobrie Cc: Matthias Fuchs Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/esd_usb2.c | 129 ++++++++++++++++++++------------- 1 file changed, 77 insertions(+), 52 deletions(-) diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c index 9b74d1e3ad44..6aa7b3266c80 100644 --- a/drivers/net/can/usb/esd_usb2.c +++ b/drivers/net/can/usb/esd_usb2.c @@ -612,9 +612,15 @@ static int esd_usb2_start(struct esd_usb2_net_priv *priv) { struct esd_usb2 *dev = priv->usb2; struct net_device *netdev = priv->netdev; - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; int err, i; + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) { + err = -ENOMEM; + goto out; + } + /* * Enable all IDs * The IDADD message takes up to 64 32 bit bitmasks (2048 bits). @@ -628,33 +634,32 @@ static int esd_usb2_start(struct esd_usb2_net_priv *priv) * the number of the starting bitmask (0..64) to the filter.option * field followed by only some bitmasks. */ - msg.msg.hdr.cmd = CMD_IDADD; - msg.msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; - msg.msg.filter.net = priv->index; - msg.msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ + msg->msg.hdr.cmd = CMD_IDADD; + msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; + msg->msg.filter.net = priv->index; + msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ for (i = 0; i < ESD_MAX_ID_SEGMENT; i++) - msg.msg.filter.mask[i] = cpu_to_le32(0xffffffff); + msg->msg.filter.mask[i] = cpu_to_le32(0xffffffff); /* enable 29bit extended IDs */ - msg.msg.filter.mask[ESD_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001); + msg->msg.filter.mask[ESD_MAX_ID_SEGMENT] = cpu_to_le32(0x00000001); - err = esd_usb2_send_msg(dev, &msg); + err = esd_usb2_send_msg(dev, msg); if (err) - goto failed; + goto out; err = esd_usb2_setup_rx_urbs(dev); if (err) - goto failed; + goto out; priv->can.state = CAN_STATE_ERROR_ACTIVE; - return 0; - -failed: +out: if (err == -ENODEV) netif_device_detach(netdev); + if (err) + netdev_err(netdev, "couldn't start device: %d\n", err); - netdev_err(netdev, "couldn't start device: %d\n", err); - + kfree(msg); return err; } @@ -833,26 +838,30 @@ nourbmem: static int esd_usb2_close(struct net_device *netdev) { struct esd_usb2_net_priv *priv = netdev_priv(netdev); - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; int i; + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) + return -ENOMEM; + /* Disable all IDs (see esd_usb2_start()) */ - msg.msg.hdr.cmd = CMD_IDADD; - msg.msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; - msg.msg.filter.net = priv->index; - msg.msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ + msg->msg.hdr.cmd = CMD_IDADD; + msg->msg.hdr.len = 2 + ESD_MAX_ID_SEGMENT; + msg->msg.filter.net = priv->index; + msg->msg.filter.option = ESD_ID_ENABLE; /* start with segment 0 */ for (i = 0; i <= ESD_MAX_ID_SEGMENT; i++) - msg.msg.filter.mask[i] = 0; - if (esd_usb2_send_msg(priv->usb2, &msg) < 0) + msg->msg.filter.mask[i] = 0; + if (esd_usb2_send_msg(priv->usb2, msg) < 0) netdev_err(netdev, "sending idadd message failed\n"); /* set CAN controller to reset mode */ - msg.msg.hdr.len = 2; - msg.msg.hdr.cmd = CMD_SETBAUD; - msg.msg.setbaud.net = priv->index; - msg.msg.setbaud.rsvd = 0; - msg.msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE); - if (esd_usb2_send_msg(priv->usb2, &msg) < 0) + msg->msg.hdr.len = 2; + msg->msg.hdr.cmd = CMD_SETBAUD; + msg->msg.setbaud.net = priv->index; + msg->msg.setbaud.rsvd = 0; + msg->msg.setbaud.baud = cpu_to_le32(ESD_USB2_NO_BAUDRATE); + if (esd_usb2_send_msg(priv->usb2, msg) < 0) netdev_err(netdev, "sending setbaud message failed\n"); priv->can.state = CAN_STATE_STOPPED; @@ -861,6 +870,8 @@ static int esd_usb2_close(struct net_device *netdev) close_candev(netdev); + kfree(msg); + return 0; } @@ -886,7 +897,8 @@ static int esd_usb2_set_bittiming(struct net_device *netdev) { struct esd_usb2_net_priv *priv = netdev_priv(netdev); struct can_bittiming *bt = &priv->can.bittiming; - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; + int err; u32 canbtr; int sjw_shift; @@ -912,15 +924,22 @@ static int esd_usb2_set_bittiming(struct net_device *netdev) if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) canbtr |= ESD_USB2_3_SAMPLES; - msg.msg.hdr.len = 2; - msg.msg.hdr.cmd = CMD_SETBAUD; - msg.msg.setbaud.net = priv->index; - msg.msg.setbaud.rsvd = 0; - msg.msg.setbaud.baud = cpu_to_le32(canbtr); + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) + return -ENOMEM; + + msg->msg.hdr.len = 2; + msg->msg.hdr.cmd = CMD_SETBAUD; + msg->msg.setbaud.net = priv->index; + msg->msg.setbaud.rsvd = 0; + msg->msg.setbaud.baud = cpu_to_le32(canbtr); netdev_info(netdev, "setting BTR=%#x\n", canbtr); - return esd_usb2_send_msg(priv->usb2, &msg); + err = esd_usb2_send_msg(priv->usb2, msg); + + kfree(msg); + return err; } static int esd_usb2_get_berr_counter(const struct net_device *netdev, @@ -1022,7 +1041,7 @@ static int esd_usb2_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct esd_usb2 *dev; - struct esd_usb2_msg msg; + struct esd_usb2_msg *msg; int i, err; dev = kzalloc(sizeof(*dev), GFP_KERNEL); @@ -1037,27 +1056,33 @@ static int esd_usb2_probe(struct usb_interface *intf, usb_set_intfdata(intf, dev); - /* query number of CAN interfaces (nets) */ - msg.msg.hdr.cmd = CMD_VERSION; - msg.msg.hdr.len = 2; - msg.msg.version.rsvd = 0; - msg.msg.version.flags = 0; - msg.msg.version.drv_version = 0; + msg = kmalloc(sizeof(*msg), GFP_KERNEL); + if (!msg) { + err = -ENOMEM; + goto free_msg; + } - err = esd_usb2_send_msg(dev, &msg); + /* query number of CAN interfaces (nets) */ + msg->msg.hdr.cmd = CMD_VERSION; + msg->msg.hdr.len = 2; + msg->msg.version.rsvd = 0; + msg->msg.version.flags = 0; + msg->msg.version.drv_version = 0; + + err = esd_usb2_send_msg(dev, msg); if (err < 0) { dev_err(&intf->dev, "sending version message failed\n"); - goto free_dev; + goto free_msg; } - err = esd_usb2_wait_msg(dev, &msg); + err = esd_usb2_wait_msg(dev, msg); if (err < 0) { dev_err(&intf->dev, "no version message answer\n"); - goto free_dev; + goto free_msg; } - dev->net_count = (int)msg.msg.version_reply.nets; - dev->version = le32_to_cpu(msg.msg.version_reply.version); + dev->net_count = (int)msg->msg.version_reply.nets; + dev->version = le32_to_cpu(msg->msg.version_reply.version); if (device_create_file(&intf->dev, &dev_attr_firmware)) dev_err(&intf->dev, @@ -1075,10 +1100,10 @@ static int esd_usb2_probe(struct usb_interface *intf, for (i = 0; i < dev->net_count; i++) esd_usb2_probe_one_net(intf, i); - return 0; - -free_dev: - kfree(dev); +free_msg: + kfree(msg); + if (err) + kfree(dev); done: return err; } From f14e22435a27ef183bbfa78f77ad86644c0b354c Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Thu, 16 May 2013 11:36:40 +0200 Subject: [PATCH 337/429] net: can: peak_usb: Do not do dma on the stack smatch reports the following warnings: drivers/net/can/usb/peak_usb/pcan_usb_pro.c:514 pcan_usb_pro_drv_loaded() error: doing dma on the stack (buffer) drivers/net/can/usb/peak_usb/pcan_usb_pro.c:878 pcan_usb_pro_init() error: doing dma on the stack (&fi) drivers/net/can/usb/peak_usb/pcan_usb_pro.c:889 pcan_usb_pro_init() error: doing dma on the stack (&bi) See "Documentation/DMA-API-HOWTO.txt" section "What memory is DMA'able?" Cc: Stephane Grosjean Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 61 ++++++++++++++------- drivers/net/can/usb/peak_usb/pcan_usb_pro.h | 1 + 2 files changed, 41 insertions(+), 21 deletions(-) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c index 30d79bfa5b10..8ee9d1556e6e 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c @@ -504,15 +504,24 @@ static int pcan_usb_pro_restart_async(struct peak_usb_device *dev, return usb_submit_urb(urb, GFP_ATOMIC); } -static void pcan_usb_pro_drv_loaded(struct peak_usb_device *dev, int loaded) +static int pcan_usb_pro_drv_loaded(struct peak_usb_device *dev, int loaded) { - u8 buffer[16]; + u8 *buffer; + int err; + + buffer = kmalloc(PCAN_USBPRO_FCT_DRVLD_REQ_LEN, GFP_KERNEL); + if (!buffer) + return -ENOMEM; buffer[0] = 0; buffer[1] = !!loaded; - pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_FCT, - PCAN_USBPRO_FCT_DRVLD, buffer, sizeof(buffer)); + err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_FCT, + PCAN_USBPRO_FCT_DRVLD, buffer, + PCAN_USBPRO_FCT_DRVLD_REQ_LEN); + kfree(buffer); + + return err; } static inline @@ -851,21 +860,24 @@ static int pcan_usb_pro_stop(struct peak_usb_device *dev) */ static int pcan_usb_pro_init(struct peak_usb_device *dev) { - struct pcan_usb_pro_interface *usb_if; struct pcan_usb_pro_device *pdev = container_of(dev, struct pcan_usb_pro_device, dev); + struct pcan_usb_pro_interface *usb_if = NULL; + struct pcan_usb_pro_fwinfo *fi = NULL; + struct pcan_usb_pro_blinfo *bi = NULL; + int err; /* do this for 1st channel only */ if (!dev->prev_siblings) { - struct pcan_usb_pro_fwinfo fi; - struct pcan_usb_pro_blinfo bi; - int err; - /* allocate netdevices common structure attached to first one */ usb_if = kzalloc(sizeof(struct pcan_usb_pro_interface), GFP_KERNEL); - if (!usb_if) - return -ENOMEM; + fi = kmalloc(sizeof(struct pcan_usb_pro_fwinfo), GFP_KERNEL); + bi = kmalloc(sizeof(struct pcan_usb_pro_blinfo), GFP_KERNEL); + if (!usb_if || !fi || !bi) { + err = -ENOMEM; + goto err_out; + } /* number of ts msgs to ignore before taking one into account */ usb_if->cm_ignore_count = 5; @@ -877,34 +889,34 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev) */ err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_INFO, PCAN_USBPRO_INFO_FW, - &fi, sizeof(fi)); + fi, sizeof(*fi)); if (err) { - kfree(usb_if); dev_err(dev->netdev->dev.parent, "unable to read %s firmware info (err %d)\n", pcan_usb_pro.name, err); - return err; + goto err_out; } err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_INFO, PCAN_USBPRO_INFO_BL, - &bi, sizeof(bi)); + bi, sizeof(*bi)); if (err) { - kfree(usb_if); dev_err(dev->netdev->dev.parent, "unable to read %s bootloader info (err %d)\n", pcan_usb_pro.name, err); - return err; + goto err_out; } + /* tell the device the can driver is running */ + err = pcan_usb_pro_drv_loaded(dev, 1); + if (err) + goto err_out; + dev_info(dev->netdev->dev.parent, "PEAK-System %s hwrev %u serial %08X.%08X (%u channels)\n", pcan_usb_pro.name, - bi.hw_rev, bi.serial_num_hi, bi.serial_num_lo, + bi->hw_rev, bi->serial_num_hi, bi->serial_num_lo, pcan_usb_pro.ctrl_count); - - /* tell the device the can driver is running */ - pcan_usb_pro_drv_loaded(dev, 1); } else { usb_if = pcan_usb_pro_dev_if(dev->prev_siblings); } @@ -916,6 +928,13 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev) pcan_usb_pro_set_led(dev, 0, 1); return 0; + + err_out: + kfree(bi); + kfree(fi); + kfree(usb_if); + + return err; } static void pcan_usb_pro_exit(struct peak_usb_device *dev) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h index a869918c5620..32275af547e0 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h @@ -29,6 +29,7 @@ /* Vendor Request value for XXX_FCT */ #define PCAN_USBPRO_FCT_DRVLD 5 /* tell device driver is loaded */ +#define PCAN_USBPRO_FCT_DRVLD_REQ_LEN 16 /* PCAN_USBPRO_INFO_BL vendor request record type */ struct __packed pcan_usb_pro_blinfo { From 7abb690a0e095717420ba78dcab4309abbbec78a Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 24 May 2013 21:29:32 +0200 Subject: [PATCH 338/429] drm/i915: Fix spurious -EIO/SIGBUS on wedged gpus Chris Wilson noticed that since commit 1f83fee08d625f8d0130f9fe5ef7b17c2e022f3c [v3.9] Author: Daniel Vetter Date: Thu Nov 15 17:17:22 2012 +0100 drm/i915: clear up wedged transitions X can again get -EIO when it does not expect it. And even worse score a SIGBUS when accessing gtt mmaps. The established ABI is that we _only_ return an -EIO from execbuf - all other ioctls should just work. And since the reset code moves all bos out of gpu domains and clears out all the last_seqno/ring tracking there really shouldn't be any reason for non-execbuf code to ever touch the hw and see an -EIO. After some extensive discussions we've noticed that these spurios -EIO are caused by i915_gem_wait_for_error: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg20540.html That is easy to fix by returning 0 instead of -EIO, since grabbing the dev->struct_mutex does not yet mean that we actually want to touch the hw. And so there is no reason at all to fail with -EIO. But that's not the entire since, since often (at least it's easily googleable) dmesg indicates that the reset fails and we declare the gpu wedged. Then, quite a bit later X wakes up with the "Timed out waiting for the gpu reset to complete" DRM_ERROR message in wait_for_errror and brings down the desktop with an -EIO/SIGBUS. So clearly we're missing a wakeup somewhere, since the gpu reset just doesn't take 10 seconds to complete. And indeed we're do handle the terminally wedged state wrong. Fix this all up. References: https://bugs.freedesktop.org/show_bug.cgi?id=63921 References: https://bugs.freedesktop.org/show_bug.cgi?id=64073 Cc: Chris Wilson Cc: Daniel Vetter Cc: Damien Lespiau Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index a6cf8e843973..970ad17c99ab 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -91,14 +91,11 @@ i915_gem_wait_for_error(struct i915_gpu_error *error) { int ret; -#define EXIT_COND (!i915_reset_in_progress(error)) +#define EXIT_COND (!i915_reset_in_progress(error) || \ + i915_terminally_wedged(error)) if (EXIT_COND) return 0; - /* GPU is already declared terminally dead, give up. */ - if (i915_terminally_wedged(error)) - return -EIO; - /* * Only wait 10 seconds for the gpu reset to complete to avoid hanging * userspace. If it takes that long something really bad is going on and From d62cf62ad07d5584da1f2132641928ded8216327 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 29 May 2013 10:41:29 +0200 Subject: [PATCH 339/429] drm/i915: Quirk the pipe A quirk in the modeset state checker If we always force the pipe A to on we can't use the hw state to decide whether it should be on. Hence quirk the quirk. The problem is that crtc->active tracks the state of the entire display pipe, i.e. including planes, encoders and all. But our hw state readout simply looks at the pipe. But with the pipe A quirk we force-enable that (together with it's pll). To fix that mismatch we have two options: - Quirk the checked state to match what our sw tracking states if the pipe A quirk is in effect. - Improve the hw state readout to not get fooled by the pipe A quirk. Since we already have similar state clamping in e.g. assert_pipe I've opted for the first variant. Also note that we don't really loose any state checking: Individual pieces of the abstract crtc pipe are checked in the enable/disable functions with the various asssert_* checks we have, and the hw state check code doesn't check anything if the pipe is off anyway. v2: Pimp commit message after discussion with Chris and only apply the quirk for the quirk if we're checking pipe A. Otherwise we'll miss state checking for pipe B on i830M ... v3: Make the code comment consistent with the improved commit message, too (Chris). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64764 Cc: stable@vger.kernel.org Cc: Chris Wilson Reported-and-Tested-by: mlsemon35@gmail.com (v1) Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index ad1117bebd7e..56746dcac40f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7937,6 +7937,11 @@ intel_modeset_check_state(struct drm_device *dev) memset(&pipe_config, 0, sizeof(pipe_config)); active = dev_priv->display.get_pipe_config(crtc, &pipe_config); + + /* hw state is inconsistent with the pipe A quirk */ + if (crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) + active = crtc->active; + WARN(crtc->active != active, "crtc active state doesn't match with hw state " "(expected %i, found %i)\n", crtc->active, active); From 45a211d75137b1ac869a8a758a6667f15827a115 Mon Sep 17 00:00:00 2001 From: Ben Mesman Date: Tue, 16 Apr 2013 20:00:28 +0200 Subject: [PATCH 340/429] drm/i915: no lvds quirk for hp t5740 Last year, a patch was made for the "HP t5740e Thin Client" (see http://lists.freedesktop.org/archives/dri-devel/2012-May/023245.html). This device reports an lvds panel, but does not really have one. The predecessor of this device is the "hp t5740", which also does not have an lvds panel. This patch will add the same quirk for this device. Signed-off-by: Ben Mesman Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_lvds.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index f36f1baabd5a..29412cc89c7a 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -815,10 +815,10 @@ static const struct dmi_system_id intel_no_lvds[] = { }, { .callback = intel_no_lvds_dmi_callback, - .ident = "Hewlett-Packard HP t5740e Thin Client", + .ident = "Hewlett-Packard HP t5740", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP t5740e Thin Client"), + DMI_MATCH(DMI_PRODUCT_NAME, " t5740"), }, }, { From 28420dad233520811c0e0860e7fb4975ed863fc4 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 3 Jun 2013 14:40:22 +0200 Subject: [PATCH 341/429] fuse: fix readdirplus Oops in fuse_dentry_revalidate Fix bug introduced by commit 4582a4ab2a "FUSE: Adapt readdirplus to application usage patterns". We need to check for a positive dentry; negative dentries are not added by readdirplus. Secondly we need to advise the use of readdirplus on the *parent*, otherwise the whole thing is useless. Thirdly all this is only relevant if "readdirplus_auto" mode is selected by the filesystem. We advise the use of readdirplus only if the dentry was still valid. If we had to redo the lookup then there was no use in doing the -plus version. Reported-by: Bernd Schubert Signed-off-by: Miklos Szeredi CC: Feng Shuo CC: stable@vger.kernel.org --- fs/fuse/dir.c | 12 +++++++++--- fs/fuse/inode.c | 7 ++++--- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 254df56b847b..f3f783dc4f75 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -180,6 +180,8 @@ u64 fuse_get_attr_version(struct fuse_conn *fc) static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags) { struct inode *inode; + struct dentry *parent; + struct fuse_conn *fc; inode = ACCESS_ONCE(entry->d_inode); if (inode && is_bad_inode(inode)) @@ -187,10 +189,8 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags) else if (fuse_dentry_time(entry) < get_jiffies_64()) { int err; struct fuse_entry_out outarg; - struct fuse_conn *fc; struct fuse_req *req; struct fuse_forget_link *forget; - struct dentry *parent; u64 attr_version; /* For negative dentries, always do a fresh lookup */ @@ -241,8 +241,14 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags) entry_attr_timeout(&outarg), attr_version); fuse_change_entry_timeout(entry, &outarg); + } else if (inode) { + fc = get_fuse_conn(inode); + if (fc->readdirplus_auto) { + parent = dget_parent(entry); + fuse_advise_use_readdirplus(parent->d_inode); + dput(parent); + } } - fuse_advise_use_readdirplus(inode); return 1; } diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 6201f81e4d3a..9a0cdde14a08 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -867,10 +867,11 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req) fc->dont_mask = 1; if (arg->flags & FUSE_AUTO_INVAL_DATA) fc->auto_inval_data = 1; - if (arg->flags & FUSE_DO_READDIRPLUS) + if (arg->flags & FUSE_DO_READDIRPLUS) { fc->do_readdirplus = 1; - if (arg->flags & FUSE_READDIRPLUS_AUTO) - fc->readdirplus_auto = 1; + if (arg->flags & FUSE_READDIRPLUS_AUTO) + fc->readdirplus_auto = 1; + } if (arg->flags & FUSE_ASYNC_DIO) fc->async_dio = 1; } else { From c9ecf989cc7626e9edf8abef79f64b909542129b Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Thu, 30 May 2013 15:35:50 -0400 Subject: [PATCH 342/429] fuse: return -EIOCBQUEUED from fuse_direct_IO() for all async requests If request submission fails for an async request (i.e., get_user_pages() returns -ERESTARTSYS), we currently skip the -EIOCBQUEUED return and drop into wait_for_sync_kiocb() forever. Avoid this by always returning -EIOCBQUEUED for async requests. If an error occurs, the error is passed into fuse_aio_complete(), returned via aio_complete() and thus propagated to userspace via io_getevents(). Signed-off-by: Brian Foster Reviewed-by: Maxim Patlasov Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index d9f467907791..b3ad8d61a162 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2432,7 +2432,7 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, fuse_aio_complete(io, ret < 0 ? ret : 0, -1); /* we have a non-extending, async request, so return */ - if (ret > 0 && !is_sync_kiocb(iocb)) + if (!is_sync_kiocb(iocb)) return -EIOCBQUEUED; ret = wait_on_sync_kiocb(iocb); From e5c5f05dca0cf90f0f3bb1aea85dcf658baff185 Mon Sep 17 00:00:00 2001 From: Maxim Patlasov Date: Thu, 30 May 2013 16:41:34 +0400 Subject: [PATCH 343/429] fuse: fix alignment in short read optimization for async_dio The bug was introduced with async_dio feature: trying to optimize short reads, we cut number-of-bytes-to-read to i_size boundary. Hence the following example: truncate --size=300 /mnt/file dd if=/mnt/file of=/dev/null iflag=direct led to FUSE_READ request of 300 bytes size. This turned out to be problem for userspace fuse implementations who rely on assumption that kernel fuse does not change alignment of request from client FS. The patch turns off the optimization if async_dio is disabled. And, if it's enabled, the patch fixes adjustment of number-of-bytes-to-read to preserve alignment. Note, that we cannot throw out short read optimization entirely because otherwise a direct read of a huge size issued on a tiny file would generate a huge amount of fuse requests and most of them would be ACKed by userspace with zero bytes read. Signed-off-by: Maxim Patlasov Reviewed-by: Brian Foster Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index b3ad8d61a162..e570081f9f76 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2373,6 +2373,11 @@ static void fuse_do_truncate(struct file *file) fuse_do_setattr(inode, &attr, file); } +static inline loff_t fuse_round_up(loff_t off) +{ + return round_up(off, FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT); +} + static ssize_t fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, loff_t offset, unsigned long nr_segs) @@ -2380,6 +2385,7 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, ssize_t ret = 0; struct file *file = iocb->ki_filp; struct fuse_file *ff = file->private_data; + bool async_dio = ff->fc->async_dio; loff_t pos = 0; struct inode *inode; loff_t i_size; @@ -2391,10 +2397,10 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, i_size = i_size_read(inode); /* optimization for short read */ - if (rw != WRITE && offset + count > i_size) { + if (async_dio && rw != WRITE && offset + count > i_size) { if (offset >= i_size) return 0; - count = i_size - offset; + count = min_t(loff_t, count, fuse_round_up(i_size - offset)); } io = kmalloc(sizeof(struct fuse_io_priv), GFP_KERNEL); @@ -2412,7 +2418,7 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, * By default, we want to optimize all I/Os with async request * submission to the client filesystem if supported. */ - io->async = ff->fc->async_dio; + io->async = async_dio; io->iocb = iocb; /* @@ -2420,7 +2426,7 @@ fuse_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, * to wait on real async I/O requests, so we must submit this request * synchronously. */ - if (!is_sync_kiocb(iocb) && (offset + count > i_size)) + if (!is_sync_kiocb(iocb) && (offset + count > i_size) && rw == WRITE) io->async = false; if (rw == WRITE) From e49f3959a96dc279860af7e86e6dbcfda50580a5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Adis=20Hamzi=C4=87?= Date: Sun, 2 Jun 2013 16:47:54 +0200 Subject: [PATCH 344/429] radeon: Fix system hang issue when using KMS with older cards MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current radeon driver initialization routines, when using KMS, are written so that the IRQ installation routine is called before initializing the WB buffer and the CP rings. With some ASICs, though, the IRQ routine tries to access the GFX_INDEX ring causing a call to RREG32 with the value of -1 in radeon_fence_read. This, in turn causes the system to completely hang with some cards, requiring a hard reset. A call stack that can cause such a hang looks like this (using rv515 ASIC for the example here): * rv515_init (rv515.c) * radeon_irq_kms_init (radeon_irq_kms.c) * drm_irq_install (drm_irq.c) * radeon_driver_irq_preinstall_kms (radeon_irq_kms.c) * rs600_irq_process (rs600.c) * radeon_fence_process - due to SW interrupt (radeon_fence.c) * radeon_fence_read (radeon_fence.c) * hang due to RREG32(-1) The patch moves the IRQ installation to the card startup routine, after the ring has been initialized, but before the IRQ has been set. This fixes the issue, but requires a check to see if the IRQ is already installed, as is the case in the system resume codepath. I have tested the patch on three machines using the rv515, the rv770 and the evergreen ASIC. They worked without issues. This seems to be a known issue and has been reported on several bug tracking sites by various distributions (see links below). Most of reports recommend booting the system with KMS disabled and then enabling KMS by reloading the radeon module. For some reason, this was indeed a usable workaround, however, UMS is now deprecated and disabled by default. Bug reports: https://bugzilla.redhat.com/show_bug.cgi?id=845745 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/561789 https://bbs.archlinux.org/viewtopic.php?id=156964 Signed-off-by: Adis Hamzić Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/evergreen.c | 10 ++++++---- drivers/gpu/drm/radeon/ni.c | 10 ++++++---- drivers/gpu/drm/radeon/r100.c | 9 ++++++--- drivers/gpu/drm/radeon/r300.c | 9 ++++++--- drivers/gpu/drm/radeon/r420.c | 10 ++++++---- drivers/gpu/drm/radeon/r520.c | 9 ++++++--- drivers/gpu/drm/radeon/r600.c | 10 ++++++---- drivers/gpu/drm/radeon/rs400.c | 9 ++++++--- drivers/gpu/drm/radeon/rs600.c | 9 ++++++--- drivers/gpu/drm/radeon/rs690.c | 9 ++++++--- drivers/gpu/drm/radeon/rv515.c | 9 ++++++--- drivers/gpu/drm/radeon/rv770.c | 10 ++++++---- drivers/gpu/drm/radeon/si.c | 10 ++++++---- 13 files changed, 78 insertions(+), 45 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 8546e3b333b4..0f89ce3d02b9 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -4754,6 +4754,12 @@ static int evergreen_startup(struct radeon_device *rdev) rdev->ring[R600_RING_TYPE_UVD_INDEX].ring_size = 0; /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r = r600_irq_init(rdev); if (r) { DRM_ERROR("radeon: IH init failed (%d).\n", r); @@ -4923,10 +4929,6 @@ int evergreen_init(struct radeon_device *rdev) if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; - rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL; r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024); diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 7969c0c8ec20..84583302b081 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -2025,6 +2025,12 @@ static int cayman_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r = r600_irq_init(rdev); if (r) { DRM_ERROR("radeon: IH init failed (%d).\n", r); @@ -2190,10 +2196,6 @@ int cayman_init(struct radeon_device *rdev) if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; - ring->ring_obj = NULL; r600_ring_init(rdev, ring, 1024 * 1024); diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 4973bff37fec..d0314ecbd7c1 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -3869,6 +3869,12 @@ static int r100_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r100_irq_set(rdev); rdev->config.r100.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -4022,9 +4028,6 @@ int r100_init(struct radeon_device *rdev) r100_mc_init(rdev); /* Fence driver */ r = radeon_fence_driver_init(rdev); - if (r) - return r; - r = radeon_irq_kms_init(rdev); if (r) return r; /* Memory manager */ diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index c60350e6872d..b9b776f1e582 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -1382,6 +1382,12 @@ static int r300_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r100_irq_set(rdev); rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -1514,9 +1520,6 @@ int r300_init(struct radeon_device *rdev) r300_mc_init(rdev); /* Fence driver */ r = radeon_fence_driver_init(rdev); - if (r) - return r; - r = radeon_irq_kms_init(rdev); if (r) return r; /* Memory manager */ diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index 6fce2eb4dd16..4e796ecf9ea4 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -265,6 +265,12 @@ static int r420_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r100_irq_set(rdev); rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -411,10 +417,6 @@ int r420_init(struct radeon_device *rdev) if (r) { return r; } - r = radeon_irq_kms_init(rdev); - if (r) { - return r; - } /* Memory manager */ r = radeon_bo_init(rdev); if (r) { diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index f795a4e092cb..e1aece73b370 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -194,6 +194,12 @@ static int r520_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + rs600_irq_set(rdev); rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -295,9 +301,6 @@ int r520_init(struct radeon_device *rdev) rv515_debugfs(rdev); /* Fence driver */ r = radeon_fence_driver_init(rdev); - if (r) - return r; - r = radeon_irq_kms_init(rdev); if (r) return r; /* Memory manager */ diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index b45e64848677..0f30d0df1e07 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -3202,6 +3202,12 @@ static int r600_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r = r600_irq_init(rdev); if (r) { DRM_ERROR("radeon: IH init failed (%d).\n", r); @@ -3356,10 +3362,6 @@ int r600_init(struct radeon_device *rdev) if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; - rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL; r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024); diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index 73051ce3121e..233a9b9fa1f7 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -417,6 +417,12 @@ static int rs400_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r100_irq_set(rdev); rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -533,9 +539,6 @@ int rs400_init(struct radeon_device *rdev) rs400_mc_init(rdev); /* Fence driver */ r = radeon_fence_driver_init(rdev); - if (r) - return r; - r = radeon_irq_kms_init(rdev); if (r) return r; /* Memory manager */ diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 46fa1b07c560..670b555d2ca2 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -923,6 +923,12 @@ static int rs600_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + rs600_irq_set(rdev); rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -1045,9 +1051,6 @@ int rs600_init(struct radeon_device *rdev) rs600_debugfs(rdev); /* Fence driver */ r = radeon_fence_driver_init(rdev); - if (r) - return r; - r = radeon_irq_kms_init(rdev); if (r) return r; /* Memory manager */ diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index ab4c86cfd552..55880d5962c3 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -651,6 +651,12 @@ static int rs690_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + rs600_irq_set(rdev); rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -774,9 +780,6 @@ int rs690_init(struct radeon_device *rdev) rv515_debugfs(rdev); /* Fence driver */ r = radeon_fence_driver_init(rdev); - if (r) - return r; - r = radeon_irq_kms_init(rdev); if (r) return r; /* Memory manager */ diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index ffcba730c57c..21c7d7b26e55 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -532,6 +532,12 @@ static int rv515_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + rs600_irq_set(rdev); rdev->config.r300.hdp_cntl = RREG32(RADEON_HOST_PATH_CNTL); /* 1M ring buffer */ @@ -660,9 +666,6 @@ int rv515_init(struct radeon_device *rdev) rv515_debugfs(rdev); /* Fence driver */ r = radeon_fence_driver_init(rdev); - if (r) - return r; - r = radeon_irq_kms_init(rdev); if (r) return r; /* Memory manager */ diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 08aef24afe40..4a62ad2e5399 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -1887,6 +1887,12 @@ static int rv770_startup(struct radeon_device *rdev) rdev->ring[R600_RING_TYPE_UVD_INDEX].ring_size = 0; /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r = r600_irq_init(rdev); if (r) { DRM_ERROR("radeon: IH init failed (%d).\n", r); @@ -2045,10 +2051,6 @@ int rv770_init(struct radeon_device *rdev) if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; - rdev->ring[RADEON_RING_TYPE_GFX_INDEX].ring_obj = NULL; r600_ring_init(rdev, &rdev->ring[RADEON_RING_TYPE_GFX_INDEX], 1024 * 1024); diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index d1ba9d88f311..a1b0da6b5808 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -5350,6 +5350,12 @@ static int si_startup(struct radeon_device *rdev) } /* Enable IRQ */ + if (!rdev->irq.installed) { + r = radeon_irq_kms_init(rdev); + if (r) + return r; + } + r = si_irq_init(rdev); if (r) { DRM_ERROR("radeon: IH init failed (%d).\n", r); @@ -5533,10 +5539,6 @@ int si_init(struct radeon_device *rdev) if (r) return r; - r = radeon_irq_kms_init(rdev); - if (r) - return r; - ring = &rdev->ring[RADEON_RING_TYPE_GFX_INDEX]; ring->ring_obj = NULL; r600_ring_init(rdev, ring, 1024 * 1024); From 65337e60a7616a610ef53b7a9f807eb80a827070 Mon Sep 17 00:00:00 2001 From: Samuel Li Date: Fri, 5 Apr 2013 17:50:53 -0400 Subject: [PATCH 345/429] drm/radeon: Use direct mapping for fast fb access on RS780/RS880 (v2) v2: fix trailing whitespace Signed-off-by: Samuel Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600.c | 43 ++++++++++++++++++++++++++++ drivers/gpu/drm/radeon/r600d.h | 8 ++++++ drivers/gpu/drm/radeon/radeon_asic.c | 4 +++ drivers/gpu/drm/radeon/radeon_asic.h | 2 ++ 4 files changed, 57 insertions(+) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 0f30d0df1e07..0e5341695922 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1046,6 +1046,24 @@ int r600_mc_wait_for_idle(struct radeon_device *rdev) return -1; } +uint32_t rs780_mc_rreg(struct radeon_device *rdev, uint32_t reg) +{ + uint32_t r; + + WREG32(R_0028F8_MC_INDEX, S_0028F8_MC_IND_ADDR(reg)); + r = RREG32(R_0028FC_MC_DATA); + WREG32(R_0028F8_MC_INDEX, ~C_0028F8_MC_IND_ADDR); + return r; +} + +void rs780_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v) +{ + WREG32(R_0028F8_MC_INDEX, S_0028F8_MC_IND_ADDR(reg) | + S_0028F8_MC_IND_WR_EN(1)); + WREG32(R_0028FC_MC_DATA, v); + WREG32(R_0028F8_MC_INDEX, 0x7F); +} + static void r600_mc_program(struct radeon_device *rdev) { struct rv515_mc_save save; @@ -1181,6 +1199,8 @@ static int r600_mc_init(struct radeon_device *rdev) { u32 tmp; int chansize, numchan; + uint32_t h_addr, l_addr; + unsigned long long k8_addr; /* Get VRAM informations */ rdev->mc.vram_is_ddr = true; @@ -1221,7 +1241,30 @@ static int r600_mc_init(struct radeon_device *rdev) if (rdev->flags & RADEON_IS_IGP) { rs690_pm_info(rdev); rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev); + + if (rdev->family == CHIP_RS780 || rdev->family == CHIP_RS880) { + /* Use K8 direct mapping for fast fb access. */ + rdev->fastfb_working = false; + h_addr = G_000012_K8_ADDR_EXT(RREG32_MC(R_000012_MC_MISC_UMA_CNTL)); + l_addr = RREG32_MC(R_000011_K8_FB_LOCATION); + k8_addr = ((unsigned long long)h_addr) << 32 | l_addr; +#if defined(CONFIG_X86_32) && !defined(CONFIG_X86_PAE) + if (k8_addr + rdev->mc.visible_vram_size < 0x100000000ULL) +#endif + { + /* FastFB shall be used with UMA memory. Here it is simply disabled when sideport + * memory is present. + */ + if (rdev->mc.igp_sideport_enabled == false && radeon_fastfb == 1) { + DRM_INFO("Direct mapping: aper base at 0x%llx, replaced by direct mapping base 0x%llx.\n", + (unsigned long long)rdev->mc.aper_base, k8_addr); + rdev->mc.aper_base = (resource_size_t)k8_addr; + rdev->fastfb_working = true; + } + } + } } + radeon_update_bandwidth_info(rdev); return 0; } diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index acb146c06973..79df558f8c40 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -1342,6 +1342,14 @@ #define PACKET3_STRMOUT_BASE_UPDATE 0x72 /* r7xx */ #define PACKET3_SURFACE_BASE_UPDATE 0x73 +#define R_000011_K8_FB_LOCATION 0x11 +#define R_000012_MC_MISC_UMA_CNTL 0x12 +#define G_000012_K8_ADDR_EXT(x) (((x) >> 0) & 0xFF) +#define R_0028F8_MC_INDEX 0x28F8 +#define S_0028F8_MC_IND_ADDR(x) (((x) & 0x1FF) << 0) +#define C_0028F8_MC_IND_ADDR 0xFFFFFE00 +#define S_0028F8_MC_IND_WR_EN(x) (((x) & 0x1) << 9) +#define R_0028FC_MC_DATA 0x28FC #define R_008020_GRBM_SOFT_RESET 0x8020 #define S_008020_SOFT_RESET_CP(x) (((x) & 1) << 0) diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index 06b8c19ab19e..a2802b47ee95 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -122,6 +122,10 @@ static void radeon_register_accessor_init(struct radeon_device *rdev) rdev->mc_rreg = &rs600_mc_rreg; rdev->mc_wreg = &rs600_mc_wreg; } + if (rdev->family == CHIP_RS780 || rdev->family == CHIP_RS880) { + rdev->mc_rreg = &rs780_mc_rreg; + rdev->mc_wreg = &rs780_mc_wreg; + } if (rdev->family >= CHIP_R600) { rdev->pciep_rreg = &r600_pciep_rreg; rdev->pciep_wreg = &r600_pciep_wreg; diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index 2c87365d345f..a72759ede753 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -347,6 +347,8 @@ extern bool r600_gui_idle(struct radeon_device *rdev); extern void r600_pm_misc(struct radeon_device *rdev); extern void r600_pm_init_profile(struct radeon_device *rdev); extern void rs780_pm_init_profile(struct radeon_device *rdev); +extern uint32_t rs780_mc_rreg(struct radeon_device *rdev, uint32_t reg); +extern void rs780_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v); extern void r600_pm_get_dynpm_state(struct radeon_device *rdev); extern void r600_set_pcie_lanes(struct radeon_device *rdev, int lanes); extern int r600_get_pcie_lanes(struct radeon_device *rdev); From 1cbcca302a318499f20a512847c5d6a510c08c35 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 3 Jun 2013 10:32:40 -0400 Subject: [PATCH 346/429] drm/radeon: don't allow audio on DCE6 It's not supported yet. Fixes display issues when users force it on. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/atombios_encoders.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index 44a7da66e081..8406c8251fbf 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -667,6 +667,8 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) int atombios_get_encoder_mode(struct drm_encoder *encoder) { + struct drm_device *dev = encoder->dev; + struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_connector *connector; struct radeon_connector *radeon_connector; @@ -693,7 +695,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) case DRM_MODE_CONNECTOR_DVII: case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */ if (drm_detect_hdmi_monitor(radeon_connector->edid) && - radeon_audio) + radeon_audio && + !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */ return ATOM_ENCODER_MODE_HDMI; else if (radeon_connector->use_digital) return ATOM_ENCODER_MODE_DVI; @@ -704,7 +707,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) case DRM_MODE_CONNECTOR_HDMIA: default: if (drm_detect_hdmi_monitor(radeon_connector->edid) && - radeon_audio) + radeon_audio && + !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */ return ATOM_ENCODER_MODE_HDMI; else return ATOM_ENCODER_MODE_DVI; @@ -718,7 +722,8 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) (dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP)) return ATOM_ENCODER_MODE_DP; else if (drm_detect_hdmi_monitor(radeon_connector->edid) && - radeon_audio) + radeon_audio && + !ASIC_IS_DCE6(rdev)) /* remove once we support DCE6 */ return ATOM_ENCODER_MODE_HDMI; else return ATOM_ENCODER_MODE_DVI; From b5f83e9b069f4bf19214ca6130947806a2b853fa Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Tue, 28 May 2013 17:00:57 +0200 Subject: [PATCH 347/429] ARM: mxs: icoll: Fix interrupts gpio bank 0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The mxs interrupt controller does not support polling for interrupts, but the driver still does it, which is a relict from pre-MULTI_IRQ_HANDLER times. The existing code assumes that 0x7f means no interrupt, but this value is an actually valid irq number, namely gpio bank 0's irq. This results in the driver not detecting when irq 0x7f is active which makes the machine effectively dead lock. This patch removes the interrupt poll loop and allows usage of gpio0 interrupt without an infinite loop. Signed-off-by: Uwe Kleine-König Signed-off-by: Markus Pargmann Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo --- drivers/irqchip/irq-mxs.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c index 29889bbdcc6d..63b3d4eb0ef7 100644 --- a/drivers/irqchip/irq-mxs.c +++ b/drivers/irqchip/irq-mxs.c @@ -76,16 +76,10 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs) { u32 irqnr; - do { - irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET); - if (irqnr != 0x7f) { - __raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR); - irqnr = irq_find_mapping(icoll_domain, irqnr); - handle_IRQ(irqnr, regs); - continue; - } - break; - } while (1); + irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET); + __raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR); + irqnr = irq_find_mapping(icoll_domain, irqnr); + handle_IRQ(irqnr, regs); } static int icoll_irq_domain_map(struct irq_domain *d, unsigned int virq, From 4a586812055dbd2588b0836ab758f6b9670c3949 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Fri, 24 May 2013 15:02:49 -0400 Subject: [PATCH 348/429] GFS2: Set log descriptor type for jdata blocks This patch sets the log descriptor type according to whether the journal commit is for (journaled) data or metadata. This was recently broken when the functions to process data and metadata log ops were combined. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/lops.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c index 68b4c8f1fce8..6c33d7b6e0c4 100644 --- a/fs/gfs2/lops.c +++ b/fs/gfs2/lops.c @@ -419,7 +419,9 @@ static void gfs2_before_commit(struct gfs2_sbd *sdp, unsigned int limit, if (total > limit) num = limit; gfs2_log_unlock(sdp); - page = gfs2_get_log_desc(sdp, GFS2_LOG_DESC_METADATA, num + 1, num); + page = gfs2_get_log_desc(sdp, + is_databuf ? GFS2_LOG_DESC_JDATA : + GFS2_LOG_DESC_METADATA, num + 1, num); ld = page_address(page); gfs2_log_lock(sdp); ptr = (__be64 *)(ld + 1); From 2b3dcf35810ff02ad0e785527a25c1b13bf82b19 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Tue, 28 May 2013 10:04:44 -0400 Subject: [PATCH 349/429] GFS2: Increase i_writecount during gfs2_setattr_size This patch calls get_write_access in a few functions. This merely increases inode->i_writecount for the duration of the function. That will ensure that any file closes won't delete the inode's multi-block reservation while the function is running. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/bmap.c | 17 +++++++++++++---- fs/gfs2/file.c | 19 +++++++++++++------ fs/gfs2/rgrp.c | 4 +++- 3 files changed, 29 insertions(+), 11 deletions(-) diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c index 1dc9a13ce6bb..93b5809c20bb 100644 --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -1286,17 +1286,26 @@ int gfs2_setattr_size(struct inode *inode, u64 newsize) if (ret) return ret; + ret = get_write_access(inode); + if (ret) + return ret; + inode_dio_wait(inode); ret = gfs2_rs_alloc(GFS2_I(inode)); if (ret) - return ret; + goto out; oldsize = inode->i_size; - if (newsize >= oldsize) - return do_grow(inode, newsize); + if (newsize >= oldsize) { + ret = do_grow(inode, newsize); + goto out; + } - return do_shrink(inode, oldsize, newsize); + ret = do_shrink(inode, oldsize, newsize); +out: + put_write_access(inode); + return ret; } int gfs2_truncatei_resume(struct gfs2_inode *ip) diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c index acd16764b133..ad0dc38d87ab 100644 --- a/fs/gfs2/file.c +++ b/fs/gfs2/file.c @@ -402,16 +402,20 @@ static int gfs2_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) /* Update file times before taking page lock */ file_update_time(vma->vm_file); + ret = get_write_access(inode); + if (ret) + goto out; + ret = gfs2_rs_alloc(ip); if (ret) - return ret; + goto out_write_access; gfs2_size_hint(vma->vm_file, pos, PAGE_CACHE_SIZE); gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh); ret = gfs2_glock_nq(&gh); if (ret) - goto out; + goto out_uninit; set_bit(GLF_DIRTY, &ip->i_gl->gl_flags); set_bit(GIF_SW_PAGED, &ip->i_flags); @@ -480,12 +484,15 @@ out_quota_unlock: gfs2_quota_unlock(ip); out_unlock: gfs2_glock_dq(&gh); -out: +out_uninit: gfs2_holder_uninit(&gh); if (ret == 0) { set_page_dirty(page); wait_for_stable_page(page); } +out_write_access: + put_write_access(inode); +out: sb_end_pagefault(inode->i_sb); return block_page_mkwrite_return(ret); } @@ -594,10 +601,10 @@ static int gfs2_release(struct inode *inode, struct file *file) kfree(file->private_data); file->private_data = NULL; - if ((file->f_mode & FMODE_WRITE) && - (atomic_read(&inode->i_writecount) == 1)) - gfs2_rs_delete(ip); + if (!(file->f_mode & FMODE_WRITE)) + return 0; + gfs2_rs_delete(ip); return 0; } diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 5232525934ae..9809156e3d04 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -638,8 +638,10 @@ void gfs2_rs_deltree(struct gfs2_blkreserv *rs) */ void gfs2_rs_delete(struct gfs2_inode *ip) { + struct inode *inode = &ip->i_inode; + down_write(&ip->i_rw_mutex); - if (ip->i_res) { + if (ip->i_res && atomic_read(&inode->i_writecount) <= 1) { gfs2_rs_deltree(ip->i_res); BUG_ON(ip->i_res->rs_free); kmem_cache_free(gfs2_rsrv_cachep, ip->i_res); From e8830d8856e3ad61067dd46c05438b0d75a0441a Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Thu, 30 May 2013 09:48:56 -0400 Subject: [PATCH 350/429] GFS2: Fall back to vmalloc if kmalloc fails for dir hash tables This version has one more correction: the vmalloc calls are replaced by __vmalloc calls to preserve the GFP_NOFS flag. When GFS2's directory management code allocates buffers for a directory hash table, if it can't get the memory it needs, it currently gives a bad return code. Rather than giving an error, this patch allows it to use virtual memory rather than kernel memory for the hash table. This should make it possible for directories to function properly, even when kernel memory becomes very fragmented. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/dir.c | 43 +++++++++++++++++++++++++++++++++---------- 1 file changed, 33 insertions(+), 10 deletions(-) diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c index c3e82bd23179..b631c9043460 100644 --- a/fs/gfs2/dir.c +++ b/fs/gfs2/dir.c @@ -354,22 +354,31 @@ static __be64 *gfs2_dir_get_hash_table(struct gfs2_inode *ip) return ERR_PTR(-EIO); } - hc = kmalloc(hsize, GFP_NOFS); - ret = -ENOMEM; + hc = kmalloc(hsize, GFP_NOFS | __GFP_NOWARN); + if (hc == NULL) + hc = __vmalloc(hsize, GFP_NOFS, PAGE_KERNEL); + if (hc == NULL) return ERR_PTR(-ENOMEM); ret = gfs2_dir_read_data(ip, hc, hsize); if (ret < 0) { - kfree(hc); + if (is_vmalloc_addr(hc)) + vfree(hc); + else + kfree(hc); return ERR_PTR(ret); } spin_lock(&inode->i_lock); - if (ip->i_hash_cache) - kfree(hc); - else + if (ip->i_hash_cache) { + if (is_vmalloc_addr(hc)) + vfree(hc); + else + kfree(hc); + } else { ip->i_hash_cache = hc; + } spin_unlock(&inode->i_lock); return ip->i_hash_cache; @@ -385,7 +394,10 @@ void gfs2_dir_hash_inval(struct gfs2_inode *ip) { __be64 *hc = ip->i_hash_cache; ip->i_hash_cache = NULL; - kfree(hc); + if (is_vmalloc_addr(hc)) + vfree(hc); + else + kfree(hc); } static inline int gfs2_dirent_sentinel(const struct gfs2_dirent *dent) @@ -1113,7 +1125,10 @@ static int dir_double_exhash(struct gfs2_inode *dip) if (IS_ERR(hc)) return PTR_ERR(hc); - h = hc2 = kmalloc(hsize_bytes * 2, GFP_NOFS); + h = hc2 = kmalloc(hsize_bytes * 2, GFP_NOFS | __GFP_NOWARN); + if (hc2 == NULL) + hc2 = __vmalloc(hsize_bytes * 2, GFP_NOFS, PAGE_KERNEL); + if (!hc2) return -ENOMEM; @@ -1145,7 +1160,10 @@ fail: gfs2_dinode_out(dip, dibh->b_data); brelse(dibh); out_kfree: - kfree(hc2); + if (is_vmalloc_addr(hc2)) + vfree(hc2); + else + kfree(hc2); return error; } @@ -1846,6 +1864,8 @@ static int leaf_dealloc(struct gfs2_inode *dip, u32 index, u32 len, memset(&rlist, 0, sizeof(struct gfs2_rgrp_list)); ht = kzalloc(size, GFP_NOFS); + if (ht == NULL) + ht = vzalloc(size); if (!ht) return -ENOMEM; @@ -1933,7 +1953,10 @@ out_rlist: gfs2_rlist_free(&rlist); gfs2_quota_unhold(dip); out: - kfree(ht); + if (is_vmalloc_addr(ht)) + vfree(ht); + else + kfree(ht); return error; } From a6a4d98b0124b5d3befe8b3a99f51f1b4fcc6dcf Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Wed, 29 May 2013 11:51:52 -0400 Subject: [PATCH 351/429] GFS2: Don't cache iopen glocks This patch makes GFS2 immediately reclaim/delete all iopen glocks as soon as they're dequeued. This allows deleters to get an EXclusive lock on iopen so files are deleted properly instead of being set as unlinked. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/inode.c | 1 + fs/gfs2/super.c | 6 +++++- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c index 8833a4f264e3..62b484e4a9e4 100644 --- a/fs/gfs2/inode.c +++ b/fs/gfs2/inode.c @@ -189,6 +189,7 @@ struct inode *gfs2_inode_lookup(struct super_block *sb, unsigned int type, return inode; fail_refresh: + ip->i_iopen_gh.gh_flags |= GL_NOCACHE; ip->i_iopen_gh.gh_gl->gl_object = NULL; gfs2_glock_dq_uninit(&ip->i_iopen_gh); fail_iopen: diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c index 917c8e1eb4ae..e5639dec66c4 100644 --- a/fs/gfs2/super.c +++ b/fs/gfs2/super.c @@ -1444,6 +1444,7 @@ static void gfs2_evict_inode(struct inode *inode) /* Must not read inode block until block type has been verified */ error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, GL_SKIP, &gh); if (unlikely(error)) { + ip->i_iopen_gh.gh_flags |= GL_NOCACHE; gfs2_glock_dq_uninit(&ip->i_iopen_gh); goto out; } @@ -1514,8 +1515,10 @@ out_unlock: if (gfs2_rs_active(ip->i_res)) gfs2_rs_deltree(ip->i_res); - if (test_bit(HIF_HOLDER, &ip->i_iopen_gh.gh_iflags)) + if (test_bit(HIF_HOLDER, &ip->i_iopen_gh.gh_iflags)) { + ip->i_iopen_gh.gh_flags |= GL_NOCACHE; gfs2_glock_dq(&ip->i_iopen_gh); + } gfs2_holder_uninit(&ip->i_iopen_gh); gfs2_glock_dq_uninit(&gh); if (error && error != GLR_TRYFAILED && error != -EROFS) @@ -1534,6 +1537,7 @@ out: ip->i_gl = NULL; if (ip->i_iopen_gh.gh_gl) { ip->i_iopen_gh.gh_gl->gl_object = NULL; + ip->i_iopen_gh.gh_flags |= GL_NOCACHE; gfs2_glock_dq_uninit(&ip->i_iopen_gh); } } From bff09b099b31a31573b3c5943f805f6a08c714f0 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Thu, 30 May 2013 15:47:04 +0200 Subject: [PATCH 352/429] serial/imx: disable hardware flow control at startup We only want to enable hardware flow control if RTS/CTS pins are connected. Signed-off-by: Lucas Stach Signed-off-by: Markus Pargmann Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 147c9e193595..8cdfbd365892 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -761,6 +761,8 @@ static int imx_startup(struct uart_port *port) temp = readl(sport->port.membase + UCR2); temp |= (UCR2_RXEN | UCR2_TXEN); + if (!sport->have_rtscts) + temp |= UCR2_IRTS; writel(temp, sport->port.membase + UCR2); if (USE_IRDA(sport)) { From 60e93575476f90a72146b51283f514da655410a7 Mon Sep 17 00:00:00 2001 From: Chander Kashyap Date: Tue, 28 May 2013 18:32:07 +0530 Subject: [PATCH 353/429] serial: samsung: enable clock before clearing pending interrupts during init Ensure that the uart controller clock is enabled prior to writing to the interrupt mask and pending registers in the s3c24xx_serial_init_port function. Signed-off-by: Chander Kashyap Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 89429410a245..0c8a9fa2be6c 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1166,6 +1166,18 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, ourport->tx_irq = ret; ourport->clk = clk_get(&platdev->dev, "uart"); + if (IS_ERR(ourport->clk)) { + pr_err("%s: Controller clock not found\n", + dev_name(&platdev->dev)); + return PTR_ERR(ourport->clk); + } + + ret = clk_prepare_enable(ourport->clk); + if (ret) { + pr_err("uart: clock failed to prepare+enable: %d\n", ret); + clk_put(ourport->clk); + return ret; + } /* Keep all interrupts masked and cleared */ if (s3c24xx_serial_has_interrupt_mask(port)) { @@ -1180,6 +1192,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, /* reset the fifos (and setup the uart) */ s3c24xx_serial_resetport(port, cfg); + clk_disable_unprepare(ourport->clk); return 0; } From 317a68427d4b0a302ecff252fd83a00557947db8 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 3 Jun 2013 09:38:26 -0400 Subject: [PATCH 354/429] Revert "serial: 8250: Make SERIAL_8250_RUNTIME_UARTS work correctly" This reverts commit cfcec52e9781f08948c6eb98198d65c45be75a70. This regresses a longstanding behaviour on X86 systems, which end up with PCI serial ports moving between ttyS4 and ttyS0 when you bisect to opposite sides of this commit, resulting in the need to constantly modify the console setting in order to bisect across it. Please revert, we can work on solving this for ARM platforms in a less disruptive way. Signed-off-by: Kyle McMartin Cc: Karthik Manamcheri Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_core.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 46528d57be72..86c00b1c5583 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -2755,7 +2755,7 @@ static void __init serial8250_isa_init_ports(void) if (nr_uarts > UART_NR) nr_uarts = UART_NR; - for (i = 0; i < UART_NR; i++) { + for (i = 0; i < nr_uarts; i++) { struct uart_8250_port *up = &serial8250_ports[i]; struct uart_port *port = &up->port; @@ -2916,7 +2916,7 @@ static int __init serial8250_console_setup(struct console *co, char *options) * if so, search for the first available port that does have * console support. */ - if (co->index >= UART_NR) + if (co->index >= nr_uarts) co->index = 0; port = &serial8250_ports[co->index].port; if (!port->iobase && !port->membase) @@ -2957,7 +2957,7 @@ int serial8250_find_port(struct uart_port *p) int line; struct uart_port *port; - for (line = 0; line < UART_NR; line++) { + for (line = 0; line < nr_uarts; line++) { port = &serial8250_ports[line].port; if (uart_match_port(p, port)) return line; @@ -3110,7 +3110,7 @@ static int serial8250_remove(struct platform_device *dev) { int i; - for (i = 0; i < UART_NR; i++) { + for (i = 0; i < nr_uarts; i++) { struct uart_8250_port *up = &serial8250_ports[i]; if (up->port.dev == &dev->dev) @@ -3178,7 +3178,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * /* * First, find a port entry which matches. */ - for (i = 0; i < UART_NR; i++) + for (i = 0; i < nr_uarts; i++) if (uart_match_port(&serial8250_ports[i].port, port)) return &serial8250_ports[i]; @@ -3187,7 +3187,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * * free entry. We look for one which hasn't been previously * used (indicated by zero iobase). */ - for (i = 0; i < UART_NR; i++) + for (i = 0; i < nr_uarts; i++) if (serial8250_ports[i].port.type == PORT_UNKNOWN && serial8250_ports[i].port.iobase == 0) return &serial8250_ports[i]; @@ -3196,7 +3196,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * * That also failed. Last resort is to find any entry which * doesn't have a real port associated with it. */ - for (i = 0; i < UART_NR; i++) + for (i = 0; i < nr_uarts; i++) if (serial8250_ports[i].port.type == PORT_UNKNOWN) return &serial8250_ports[i]; From 6529591e3eef65f0f528a81ac169f6e294b947a7 Mon Sep 17 00:00:00 2001 From: Robert Butora Date: Fri, 31 May 2013 18:09:51 +0300 Subject: [PATCH 355/429] USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device The patch adds a new HIDCOM device and does not affect other devices driven by the cypress_M8 module. Changes are: - add VendorID ProductID to device tables - skip unstable speed check because FRWD uses 115200bps - skip reset at probe which is an issue workaround for this particular device. Signed-off-by: Robert Butora Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cypress_m8.c | 18 +++++++++++++++++- drivers/usb/serial/cypress_m8.h | 4 ++++ 2 files changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index d341555d37d8..082120198f87 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -65,6 +65,7 @@ static const struct usb_device_id id_table_earthmate[] = { static const struct usb_device_id id_table_cyphidcomrs232[] = { { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { } /* Terminating entry */ }; @@ -78,6 +79,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, { } /* Terminating entry */ }; @@ -229,6 +231,12 @@ static struct usb_serial_driver * const serial_drivers[] = { * Cypress serial helper functions *****************************************************************************/ +/* FRWD Dongle hidcom needs to skip reset and speed checks */ +static inline bool is_frwd(struct usb_device *dev) +{ + return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) && + (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD)); +} static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) { @@ -238,6 +246,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) if (unstable_bauds) return new_rate; + /* FRWD Dongle uses 115200 bps */ + if (is_frwd(port->serial->dev)) + return new_rate; + /* * The general purpose firmware for the Cypress M8 allows for * a maximum speed of 57600bps (I have no idea whether DeLorme @@ -448,7 +460,11 @@ static int cypress_generic_port_probe(struct usb_serial_port *port) return -ENOMEM; } - usb_reset_configuration(serial->dev); + /* Skip reset for FRWD device. It is a workaound: + device hangs if it receives SET_CONFIGURE in Configured + state. */ + if (!is_frwd(serial->dev)) + usb_reset_configuration(serial->dev); priv->cmd_ctrl = 0; priv->line_control = 0; diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index 67cf60826884..b461311a2ae7 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -24,6 +24,10 @@ #define VENDOR_ID_CYPRESS 0x04b4 #define PRODUCT_ID_CYPHIDCOM 0x5500 +/* FRWD Dongle - a GPS sports watch */ +#define VENDOR_ID_FRWD 0x6737 +#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001 + /* Powercom UPS, chip CY7C63723 */ #define VENDOR_ID_POWERCOM 0x0d9f #define PRODUCT_ID_UPS 0x0002 From 8a2f132a01c2dd4c3905fa560f92019761ed72b1 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Fri, 24 May 2013 12:01:51 +0200 Subject: [PATCH 356/429] USB: serial: Add Option GTM681W to qcserial device table. The Option GTM681W uses a qualcomm chip and can be served by the qcserial device driver. Signed-off-by: Richard Weinberger Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 59b32b782126..bd794b43898c 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -118,6 +118,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ {USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */ {USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */ + {USB_DEVICE(0x0AF0, 0x8120)}, /* Option GTM681W */ /* non Gobi Qualcomm serial devices */ {USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 0)}, /* Sierra Wireless MC7700 Device Management */ From e919b86c3b018c0e0c5e522354e743dcc0824ee1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 3 Jun 2013 02:02:31 -0700 Subject: [PATCH 357/429] staging: alarm-dev: information leak in alarm_ioctl() Smatch complains that if we pass an invalid clock type then "ts" is never set. We need to check for errors earlier, otherwise we end up passing uninitialized stack data to userspace. Signed-off-by: Dan Carpenter Acked-by: John Stultz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/alarm-dev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/android/alarm-dev.c b/drivers/staging/android/alarm-dev.c index ceb1c643753d..c8600d96b9df 100644 --- a/drivers/staging/android/alarm-dev.c +++ b/drivers/staging/android/alarm-dev.c @@ -264,6 +264,8 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } rv = alarm_do_ioctl(file, cmd, &ts); + if (rv) + return rv; switch (ANDROID_ALARM_BASE_CMD(cmd)) { case ANDROID_ALARM_GET_TIME(0): @@ -272,7 +274,7 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg) break; } - return rv; + return 0; } #ifdef CONFIG_COMPAT static long alarm_compat_ioctl(struct file *file, unsigned int cmd, From 350753bf2bd1267f471e89829d68c35b9abf4930 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 21 May 2013 12:39:31 +0200 Subject: [PATCH 358/429] sh-pfc: r8a7779: Don't group USB OVC and PENC pins The USB_OVCn pins are alternate options for USB over-current detection when using a 3.3V USB interface. As they're not mandatory they can be used independently of the USB PENC pins. Don't group the USB_OVCn and PENC pins to avoid conflicts when the USB_OVCn pins are used by another function. Reported-by: Sergei Shtylyov Signed-off-by: Laurent Pinchart Acked-by: Linus Walleij Signed-off-by: Simon Horman --- drivers/pinctrl/sh-pfc/pfc-r8a7779.c | 45 ++++++++++++++++++++++------ 1 file changed, 36 insertions(+), 9 deletions(-) diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7779.c b/drivers/pinctrl/sh-pfc/pfc-r8a7779.c index 791a6719d8a9..8cd90e7e945a 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7779.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7779.c @@ -2357,27 +2357,48 @@ static const unsigned int sdhi3_wp_mux[] = { }; /* - USB0 ------------------------------------------------------------------- */ static const unsigned int usb0_pins[] = { - /* OVC */ - 150, 154, + /* PENC */ + 154, }; static const unsigned int usb0_mux[] = { - USB_OVC0_MARK, USB_PENC0_MARK, + USB_PENC0_MARK, +}; +static const unsigned int usb0_ovc_pins[] = { + /* USB_OVC */ + 150 +}; +static const unsigned int usb0_ovc_mux[] = { + USB_OVC0_MARK, }; /* - USB1 ------------------------------------------------------------------- */ static const unsigned int usb1_pins[] = { - /* OVC */ - 152, 155, + /* PENC */ + 155, }; static const unsigned int usb1_mux[] = { - USB_OVC1_MARK, USB_PENC1_MARK, + USB_PENC1_MARK, +}; +static const unsigned int usb1_ovc_pins[] = { + /* USB_OVC */ + 152, +}; +static const unsigned int usb1_ovc_mux[] = { + USB_OVC1_MARK, }; /* - USB2 ------------------------------------------------------------------- */ static const unsigned int usb2_pins[] = { - /* OVC, PENC */ - 125, 156, + /* PENC */ + 156, }; static const unsigned int usb2_mux[] = { - USB_OVC2_MARK, USB_PENC2_MARK, + USB_PENC2_MARK, +}; +static const unsigned int usb2_ovc_pins[] = { + /* USB_OVC */ + 125, +}; +static const unsigned int usb2_ovc_mux[] = { + USB_OVC2_MARK, }; static const struct sh_pfc_pin_group pinmux_groups[] = { @@ -2501,8 +2522,11 @@ static const struct sh_pfc_pin_group pinmux_groups[] = { SH_PFC_PIN_GROUP(sdhi3_cd), SH_PFC_PIN_GROUP(sdhi3_wp), SH_PFC_PIN_GROUP(usb0), + SH_PFC_PIN_GROUP(usb0_ovc), SH_PFC_PIN_GROUP(usb1), + SH_PFC_PIN_GROUP(usb1_ovc), SH_PFC_PIN_GROUP(usb2), + SH_PFC_PIN_GROUP(usb2_ovc), }; static const char * const du0_groups[] = { @@ -2683,14 +2707,17 @@ static const char * const sdhi3_groups[] = { static const char * const usb0_groups[] = { "usb0", + "usb0_ovc", }; static const char * const usb1_groups[] = { "usb1", + "usb1_ovc", }; static const char * const usb2_groups[] = { "usb2", + "usb2_ovc", }; static const struct sh_pfc_function pinmux_functions[] = { From 5600a8485603b240790005b9b58de4c4f6ada69d Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 22 May 2013 19:47:05 +0900 Subject: [PATCH 359/429] ARM: shmobile: sh73a0: Update CMT clockevent rating to 80 Update the CMT clockevent rating from 125 to 80. This resolves a boot-failure regression for kzm9g-reference in v3.10-rc1 introduced by f7db706b132f11c79ae1d74b2382e0926cf31644 ("ARM: 7674/1: smp: Avoid dummy clockevent being preferred over real"). The patch noted above reduces the rating of dummy clockevent from 400 to 100. This patch reduces the rating of CMT so that it is once again less than that of the dummy clockevent. Signed-off-by: Simon Horman --- arch/arm/mach-shmobile/setup-sh73a0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index fdf3894b1cc3..9696f3646864 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -252,7 +252,7 @@ static struct sh_timer_config cmt10_platform_data = { .name = "CMT10", .channel_offset = 0x10, .timer_bit = 0, - .clockevent_rating = 125, + .clockevent_rating = 80, .clocksource_rating = 125, }; From 8eafc0a161123d90617c9ca2eddfe87b382b1b89 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 4 Jun 2013 16:02:54 +0200 Subject: [PATCH 360/429] ALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface ... instead of applying to all interfaces. Reference: http://forums.gentoo.org/viewtopic-p-6886404.html Cc: Signed-off-by: Takashi Iwai --- sound/usb/quirks-table.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 6ae71b84b39d..8b75bcf136f6 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -215,7 +215,13 @@ .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL }, { - USB_DEVICE(0x046d, 0x0990), + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | + USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .idVendor = 0x046d, + .idProduct = 0x0990, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL, .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { .vendor_name = "Logitech, Inc.", .product_name = "QuickCam Pro 9000", From 53d3b4d7778daf15900867336c85d3f8dd70600c Mon Sep 17 00:00:00 2001 From: Egbert Eich Date: Tue, 4 Jun 2013 17:13:21 +0200 Subject: [PATCH 361/429] drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC. In intel_sdvo_get_lvds_modes() the wrong i2c adapter record is used for DDC. Thus the code will always have to rely on a LVDS panel mode supplied by VBT. In most cases this succeeds, so this didn't get detected for quite a while. This regression seems to have been introduced in commit f899fc64cda8569d0529452aafc0da31c042df2e Author: Chris Wilson Date: Tue Jul 20 15:44:45 2010 -0700 drm/i915: use GMBUS to manage i2c links Signed-off-by: Egbert Eich Cc: stable@vger.kernel.org Reviewed-by: Chris Wilson [danvet: Add note about which commit likely introduced this issue.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sdvo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index d15428404b9a..4c47b449b775 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1776,7 +1776,7 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) * Assume that the preferred modes are * arranged in priority order. */ - intel_ddc_get_modes(connector, intel_sdvo->i2c); + intel_ddc_get_modes(connector, &intel_sdvo->ddc); if (list_empty(&connector->probed_modes) == false) goto end; From eeb065582a9618c1cf5b7154df7bae06aeb44636 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Tue, 4 Jun 2013 09:30:55 -0700 Subject: [PATCH 362/429] Input: synaptics - fix sync lost after resume on some laptops In summary, the symptom is intermittent key events lost after resume on some machines with synaptics touchpad (seems this is synaptics _only_), and key events loss is due to serio port reconnect after psmouse sync lost. Removing psmouse and inserting it back during the suspend/resume process is able to work around the issue, so the difference between psmouse_connect() and psmouse_reconnect() is the key to the root cause of this problem. After comparing the two different paths, synaptics driver has its own implementation of synaptics_reconnect(), and the missing psmouse_probe() seems significant, the patch below added psmouse_probe() to the reconnect process, and has been verified many times that the issue could not be reliably reproduced. There are two PS/2 commands in psmouse_probe(): 1. PSMOUSE_CMD_GETID 2. PSMOUSE_CMD_RESET_DIS Only the PSMOUSE_CMD_GETID seems to be significant. The PSMOUSE_CMD_RESET_DIS is irrelevant to this issue after trying several times. So we have only implemented this patch to issue the PSMOUSE_CMD_GETID so far. Tested-by: Daniel Manrique Signed-off-by: James M Leddy Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 2f78538e09d0..b2420ae19e14 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -1379,6 +1379,7 @@ static int synaptics_reconnect(struct psmouse *psmouse) { struct synaptics_data *priv = psmouse->private; struct synaptics_data old_priv = *priv; + unsigned char param[2]; int retry = 0; int error; @@ -1394,6 +1395,7 @@ static int synaptics_reconnect(struct psmouse *psmouse) */ ssleep(1); } + ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_GETID); error = synaptics_detect(psmouse, 0); } while (error && ++retry < 3); From 3bd1f7e2db4124a2726f9afdeaaf82f09b0bd8eb Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Thu, 23 May 2013 10:22:33 -0700 Subject: [PATCH 363/429] Input: wacom - fix a typo for Cintiq 22HDT And make the lines easier to read. Signed-off-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 5c68e4486845..518282da6d85 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1966,7 +1966,8 @@ static const struct wacom_features wacom_features_0xF4 = 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xF8 = { "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047, /* Pen */ - 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 }; + 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 }; static const struct wacom_features wacom_features_0xF6 = { "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10 }; @@ -2009,7 +2010,8 @@ static const struct wacom_features wacom_features_0xFA = 63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x5B = { "Wacom Cintiq 22HDT", WACOM_PKGLEN_INTUOS, 95840, 54260, 2047, - 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e }; + 63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, + .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e }; static const struct wacom_features wacom_features_0x5E = { "Wacom Cintiq 22HDT", .type = WACOM_24HDT, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10 }; @@ -2042,7 +2044,7 @@ static const struct wacom_features wacom_features_0xE5 = static const struct wacom_features wacom_features_0xE6 = { "Wacom ISDv4 E6", WACOM_PKGLEN_TPC2FG, 27760, 15694, 255, 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, - .touch_max = 2 }; + .touch_max = 2 }; static const struct wacom_features wacom_features_0xEC = { "Wacom ISDv4 EC", WACOM_PKGLEN_GRAPHIRE, 25710, 14500, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; From d8a1d0d54d5fdac0347b75e9afd554b3dfaa465f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 4 Jun 2013 18:50:28 +0200 Subject: [PATCH 364/429] USB: zte_ev: fix broken open Remove bogus port-number check in open and close, which prevented this driver from being used with a minor number different from zero. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/zte_ev.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c index b9a88f253636..870e01e24481 100644 --- a/drivers/usb/serial/zte_ev.c +++ b/drivers/usb/serial/zte_ev.c @@ -41,9 +41,6 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, int len; unsigned char *buf; - if (port->number != 0) - return -ENODEV; - buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -166,9 +163,6 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) int len; unsigned char *buf; - if (port->number != 0) - return; - buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); if (!buf) return; From a07088098a650267b2eda689538133a324b9523f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 4 Jun 2013 18:50:29 +0200 Subject: [PATCH 365/429] USB: keyspan: fix bogus array index The outcont_endpoints array was indexed using the port minor number (which can be greater than the array size) rather than the device port number. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/keyspan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index eb30d7b01f36..d85a3e037490 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1559,7 +1559,7 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, d_details = s_priv->device_details; device_port = port->number - port->serial->minor; - outcont_urb = d_details->outcont_endpoints[port->number]; + outcont_urb = d_details->outcont_endpoints[device_port]; this_urb = p_priv->outcont_urb; dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe)); From c1ec1bcf0c97cdd4e25f16524c962fae9a4a39f9 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 4 Jun 2013 18:50:30 +0200 Subject: [PATCH 366/429] USB: keyspan: remove unused endpoint-array access Remove the no longer used endpoint-array access completely. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/keyspan.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index d85a3e037490..3549d073df22 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1548,7 +1548,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; - int outcont_urb; struct urb *this_urb; int device_port, err; @@ -1559,7 +1558,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, d_details = s_priv->device_details; device_port = port->number - port->serial->minor; - outcont_urb = d_details->outcont_endpoints[device_port]; this_urb = p_priv->outcont_urb; dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe)); @@ -1685,14 +1683,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); -#if 0 - else { - dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__ - outcont_urb, this_urb->transfer_buffer_length, - usb_pipeendpoint(this_urb->pipe)); - } -#endif - return 0; } From a26f009a070e840fadacb91013b2391ba7ab6cc2 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 4 Jun 2013 18:50:31 +0200 Subject: [PATCH 367/429] USB: mos7720: fix hardware flow control The register access to enable hardware flow control depends on the device port number and not the port minor number. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7720.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 6eac26649009..f27c621a9297 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -1629,7 +1629,7 @@ static void change_port_settings(struct tty_struct *tty, mos7720_port->shadowMCR |= (UART_MCR_XONANY); /* To set hardware flow control to the specified * * serial port, in SP1/2_CONTROL_REG */ - if (port->number) + if (port_number) write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01); else write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02); From 702df9f1819c7fc7e257251fabc5eec674342c32 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 22 May 2013 22:41:00 +0100 Subject: [PATCH 368/429] iio:callback buffer: free the scan_mask MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reported-by: Michał Mirosław Signed-off-by: Jonathan Cameron --- drivers/iio/buffer_cb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/iio/buffer_cb.c b/drivers/iio/buffer_cb.c index 9201022945e9..9d19ba74f22b 100644 --- a/drivers/iio/buffer_cb.c +++ b/drivers/iio/buffer_cb.c @@ -64,7 +64,7 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev, while (chan->indio_dev) { if (chan->indio_dev != indio_dev) { ret = -EINVAL; - goto error_release_channels; + goto error_free_scan_mask; } set_bit(chan->channel->scan_index, cb_buff->buffer.scan_mask); @@ -73,6 +73,8 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev, return cb_buff; +error_free_scan_mask: + kfree(cb_buff->buffer.scan_mask); error_release_channels: iio_channel_release_all(cb_buff->channels); error_free_cb_buff: @@ -100,6 +102,7 @@ EXPORT_SYMBOL_GPL(iio_channel_stop_all_cb); void iio_channel_release_all_cb(struct iio_cb_buffer *cb_buff) { + kfree(cb_buff->buffer.scan_mask); iio_channel_release_all(cb_buff->channels); kfree(cb_buff); } From 60bba385c5e86ee6a654e3345093eb48e258eb1d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 4 Jun 2013 16:13:25 +0300 Subject: [PATCH 369/429] staging: alarm-dev: information leak in alarm_compat_ioctl() If we pass an invalid clock type then "ts" is never set. We need to check for errors earlier, otherwise we end up passing uninitialized stack data to userspace. Reported-by: John Stultz Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/alarm-dev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/staging/android/alarm-dev.c b/drivers/staging/android/alarm-dev.c index c8600d96b9df..6dc27dac679d 100644 --- a/drivers/staging/android/alarm-dev.c +++ b/drivers/staging/android/alarm-dev.c @@ -297,6 +297,8 @@ static long alarm_compat_ioctl(struct file *file, unsigned int cmd, } rv = alarm_do_ioctl(file, cmd, &ts); + if (rv) + return rv; switch (ANDROID_ALARM_BASE_CMD(cmd)) { case ANDROID_ALARM_GET_TIME(0): /* NOTE: we modified cmd above */ @@ -305,7 +307,7 @@ static long alarm_compat_ioctl(struct file *file, unsigned int cmd, break; } - return rv; + return 0; } #endif From e916b80d2b1988e985abc0a1c85eca5b96c61f48 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 4 Jun 2013 15:44:00 +0100 Subject: [PATCH 370/429] inkern: iio_device_put after incorrect return/goto The code uses return foo; goto err_type; when instead the form should have been ret = foo; goto err_type; Here this causes a useful iio_device_put to be skipped. Signed-off-by: Joe Perches Signed-off-by: Jonathan Cameron --- drivers/iio/inkern.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index 795d100b4c36..dca4eed7b034 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -124,7 +124,7 @@ static int __of_iio_channel_get(struct iio_channel *channel, channel->indio_dev = indio_dev; index = iiospec.args_count ? iiospec.args[0] : 0; if (index >= indio_dev->num_channels) { - return -EINVAL; + err = -EINVAL; goto err_put; } channel->channel = &indio_dev->channels[index]; From 2eb3a81eef0510511a3211bb3da560f446a8c8de Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 3 Jun 2013 14:30:00 +0100 Subject: [PATCH 371/429] iio: frequency: ad4350: Fix bug / typo in mask Signed-off-by: Michael Hennerich Reviewed-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron --- drivers/iio/frequency/adf4350.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c index a884252ac66b..e76d4ace53ff 100644 --- a/drivers/iio/frequency/adf4350.c +++ b/drivers/iio/frequency/adf4350.c @@ -212,7 +212,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq) (pdata->r2_user_settings & (ADF4350_REG2_PD_POLARITY_POS | ADF4350_REG2_LDP_6ns | ADF4350_REG2_LDF_INT_N | ADF4350_REG2_CHARGE_PUMP_CURR_uA(5000) | - ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x9))); + ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x3))); st->regs[ADF4350_REG3] = pdata->r3_user_settings & (ADF4350_REG3_12BIT_CLKDIV(0xFFF) | From 6c5d4c96f979611f0165dc825af9e1cea8dd35b9 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 3 Jun 2013 09:04:00 +0100 Subject: [PATCH 372/429] iio:inkern: Fix typo/bug in convert raw to processed. Signed-off-by: Michael Hennerich Signed-off-by: Jonathan Cameron --- drivers/iio/inkern.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index dca4eed7b034..98ddc323add0 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -450,7 +450,7 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan, s64 raw64 = raw; int ret; - ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_SCALE); + ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_OFFSET); if (ret == 0) raw64 += offset; From a1c6693a50391683e7f5787bb027b1aae1afbedb Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Tue, 4 Jun 2013 05:13:26 +0000 Subject: [PATCH 373/429] net/mlx4_en: Fix adaptive moderation cq update When turning on adaptive_rx under adaptive moderation, the CQ's moderation count wasn't updated according to rx_frames which resulted in too many interrupts and bandwidth drop. Signed-off-by: Sagi Grimberg Signed-off-by: Amir Vadai Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index b35f94700093..810aab01c3c9 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1323,6 +1323,7 @@ static void mlx4_en_auto_moderation(struct mlx4_en_priv *priv) priv->last_moder_time[ring] = moder_time; cq = &priv->rx_cq[ring]; cq->moder_time = moder_time; + cq->moder_cnt = priv->rx_frames; err = mlx4_en_set_cq_moder(priv, cq); if (err) en_err(priv, "Failed modifying moderation for cq:%d\n", From 5efe5355f22fb9b7bb64d19809c0a75805e0ccb8 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 4 Jun 2013 05:13:27 +0000 Subject: [PATCH 374/429] net/mlx4_core: Return -EPROBE_DEFER when a VF is probed before PF is sufficiently initialized In the PF initialization, SRIOV is enabled before the PF is fully initialized. This allows the kernel to probe the newly-exposed VFs before the PF is ready to handle them (nested probes). Have the probe method return the -EPROBE_DEFER value in this situation (instead of the VF probe method retrying its initialization in a loop, and returning -EIO on failure). When -EPROBE_DEFER is returned by the VF probe method, the kernel itself will retry the probe after a suitable delay. Based upon a suggestion by Ben Hutchings Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/cmd.c | 2 -- drivers/net/ethernet/mellanox/mlx4/main.c | 20 ++++++-------------- 2 files changed, 6 insertions(+), 16 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c index 1df56cc50ee9..0e572a527154 100644 --- a/drivers/net/ethernet/mellanox/mlx4/cmd.c +++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c @@ -222,8 +222,6 @@ static int mlx4_comm_cmd_poll(struct mlx4_dev *dev, u8 cmd, u16 param, * FLR process. The only non-zero result in the RESET command * is MLX4_DELAY_RESET_SLAVE*/ if ((MLX4_COMM_CMD_RESET == cmd)) { - mlx4_warn(dev, "Got slave FLRed from Communication" - " channel (ret:0x%x)\n", ret_from_pending); err = MLX4_DELAY_RESET_SLAVE; } else { mlx4_warn(dev, "Communication channel timed out\n"); diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 0d32a82458bf..2f4a26039e80 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1290,7 +1290,6 @@ static int mlx4_init_slave(struct mlx4_dev *dev) { struct mlx4_priv *priv = mlx4_priv(dev); u64 dma = (u64) priv->mfunc.vhcr_dma; - int num_of_reset_retries = NUM_OF_RESET_RETRIES; int ret_from_reset = 0; u32 slave_read; u32 cmd_channel_ver; @@ -1304,18 +1303,10 @@ static int mlx4_init_slave(struct mlx4_dev *dev) * NUM_OF_RESET_RETRIES times before leaving.*/ if (ret_from_reset) { if (MLX4_DELAY_RESET_SLAVE == ret_from_reset) { - msleep(SLEEP_TIME_IN_RESET); - while (ret_from_reset && num_of_reset_retries) { - mlx4_warn(dev, "slave is currently in the" - "middle of FLR. retrying..." - "(try num:%d)\n", - (NUM_OF_RESET_RETRIES - - num_of_reset_retries + 1)); - ret_from_reset = - mlx4_comm_cmd(dev, MLX4_COMM_CMD_RESET, - 0, MLX4_COMM_TIME); - num_of_reset_retries = num_of_reset_retries - 1; - } + mlx4_warn(dev, "slave is currently in the " + "middle of FLR. Deferring probe.\n"); + mutex_unlock(&priv->cmd.slave_cmd_mutex); + return -EPROBE_DEFER; } else goto err; } @@ -1526,7 +1517,8 @@ static int mlx4_init_hca(struct mlx4_dev *dev) } else { err = mlx4_init_slave(dev); if (err) { - mlx4_err(dev, "Failed to initialize slave\n"); + if (err != -EPROBE_DEFER) + mlx4_err(dev, "Failed to initialize slave\n"); return err; } From ef96f7d46ad86625237da8a35e812bdf7896e640 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 4 Jun 2013 05:13:28 +0000 Subject: [PATCH 375/429] net/mlx4_en: Handle unassigned VF MAC address correctly When a VF sense they didn't get MAC address, use random one. This will address the case of administrator not assigning MAC to the VF through the PF OS APIs and keep udev happy. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 810aab01c3c9..89c47ea84b50 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2119,6 +2119,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, struct mlx4_en_priv *priv; int i; int err; + u64 mac_u64; dev = alloc_etherdev_mqs(sizeof(struct mlx4_en_priv), MAX_TX_RINGS, MAX_RX_RINGS); @@ -2192,10 +2193,17 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, dev->addr_len = ETH_ALEN; mlx4_en_u64_to_mac(dev->dev_addr, mdev->dev->caps.def_mac[priv->port]); if (!is_valid_ether_addr(dev->dev_addr)) { - en_err(priv, "Port: %d, invalid mac burned: %pM, quiting\n", - priv->port, dev->dev_addr); - err = -EINVAL; - goto out; + if (mlx4_is_slave(priv->mdev->dev)) { + eth_hw_addr_random(dev); + en_warn(priv, "Assigned random MAC address %pM\n", dev->dev_addr); + mac_u64 = mlx4_en_mac_to_u64(dev->dev_addr); + mdev->dev->caps.def_mac[priv->port] = mac_u64; + } else { + en_err(priv, "Port: %d, invalid mac burned: %pM, quiting\n", + priv->port, dev->dev_addr); + err = -EINVAL; + goto out; + } } memcpy(priv->prev_mac, dev->dev_addr, sizeof(priv->prev_mac)); From c418253f12c0a95c7cd894953644c7488899c9fd Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Tue, 4 Jun 2013 05:13:29 +0000 Subject: [PATCH 376/429] net/mlx4_core: Keep VF assigned MAC in the PF admin table MAC addresses assigned by the PF to VFs were not kept in the PF driver admin table. As a result, displaying the VF MACs from the PF interface to user space showed zero address where in fact the VF got non-zero address from the PF, fix that. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/fw.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c index 58a8e535d698..2c97901c6a6d 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.c +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c @@ -840,12 +840,16 @@ int mlx4_QUERY_PORT_wrapper(struct mlx4_dev *dev, int slave, MLX4_CMD_NATIVE); if (!err && dev->caps.function != slave) { - /* set slave default_mac address */ - MLX4_GET(def_mac, outbox->buf, QUERY_PORT_MAC_OFFSET); - def_mac += slave << 8; /* if config MAC in DB use it */ if (priv->mfunc.master.vf_oper[slave].vport[vhcr->in_modifier].state.mac) def_mac = priv->mfunc.master.vf_oper[slave].vport[vhcr->in_modifier].state.mac; + else { + /* set slave default_mac address */ + MLX4_GET(def_mac, outbox->buf, QUERY_PORT_MAC_OFFSET); + def_mac += slave << 8; + priv->mfunc.master.vf_admin[slave].vport[vhcr->in_modifier].mac = def_mac; + } + MLX4_PUT(outbox->buf, def_mac, QUERY_PORT_MAC_OFFSET); /* get port type - currently only eth is enabled */ From 534c877928a16ae5f9776436a497109639bf67dc Mon Sep 17 00:00:00 2001 From: Gao feng Date: Sun, 2 Jun 2013 22:16:21 +0000 Subject: [PATCH 377/429] ipv6: assign rt6_info to inet6_ifaddr in init_loopback Commit 25fb6ca4ed9cad72f14f61629b68dc03c0d9713f "net IPv6 : Fix broken IPv6 routing table after loopback down-up" forgot to assign rt6_info to the inet6_ifaddr. When disable the net device, the rt6_info which allocated in init_loopback will not be destroied in __ipv6_ifa_notify. This will trigger the waring message below [23527.916091] unregister_netdevice: waiting for tap0 to become free. Usage count = 1 Reported-by: Arkadiusz Miskiewicz Signed-off-by: Gao feng Signed-off-by: David S. Miller --- net/ipv6/addrconf.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index d1b2d8034b54..1bbf744c2cc3 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -2658,8 +2658,10 @@ static void init_loopback(struct net_device *dev) sp_rt = addrconf_dst_alloc(idev, &sp_ifa->addr, 0); /* Failure cases are ignored */ - if (!IS_ERR(sp_rt)) + if (!IS_ERR(sp_rt)) { + sp_ifa->rt = sp_rt; ip6_ins_rt(sp_rt); + } } read_unlock_bh(&idev->lock); } From e768fb292d362ff2742d843e346a10853bde68be Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Sun, 2 Jun 2013 23:28:41 +0000 Subject: [PATCH 378/429] bnx2x: fix TCP offload for tunneling ipv4 over ipv6 FW was initialized with data from wrong header, this caused TSO packets have wrong IP csum. Signed-off-by: Dmitry Kravkov Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index be59ec4b2c30..e3fe1ce41522 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3192,11 +3192,11 @@ static u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb) rc |= XMIT_CSUM_TCP; if (skb_is_gso_v6(skb)) { - rc |= (XMIT_GSO_V6 | XMIT_CSUM_TCP | XMIT_CSUM_V6); + rc |= (XMIT_GSO_V6 | XMIT_CSUM_TCP); if (rc & XMIT_CSUM_ENC) rc |= XMIT_GSO_ENC_V6; } else if (skb_is_gso(skb)) { - rc |= (XMIT_GSO_V4 | XMIT_CSUM_V4 | XMIT_CSUM_TCP); + rc |= (XMIT_GSO_V4 | XMIT_CSUM_TCP); if (rc & XMIT_CSUM_ENC) rc |= XMIT_GSO_ENC_V4; } @@ -3483,19 +3483,18 @@ static void bnx2x_update_pbds_gso_enc(struct sk_buff *skb, { u16 hlen_w = 0; u8 outerip_off, outerip_len = 0; + /* from outer IP to transport */ hlen_w = (skb_inner_transport_header(skb) - skb_network_header(skb)) >> 1; /* transport len */ - if (xmit_type & XMIT_CSUM_TCP) - hlen_w += inner_tcp_hdrlen(skb) >> 1; - else - hlen_w += sizeof(struct udphdr) >> 1; + hlen_w += inner_tcp_hdrlen(skb) >> 1; pbd2->fw_ip_hdr_to_payload_w = hlen_w; - if (xmit_type & XMIT_CSUM_ENC_V4) { + /* outer IP header info */ + if (xmit_type & XMIT_CSUM_V4) { struct iphdr *iph = ip_hdr(skb); pbd2->fw_ip_csum_wo_len_flags_frag = bswab16(csum_fold((~iph->check) - From ff5b2fabf53426c15a5f041505687f94d1b2109f Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 3 Jun 2013 00:38:39 +0000 Subject: [PATCH 379/429] net: fec: add fallback to random MAC address If no valid MAC address could be obtained from the hardware, fall back to a randomly generated one. Signed-off-by: Pavel Machek Signed-off-by: Lucas Stach Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 85a06037b242..a667015be22a 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -1038,6 +1038,18 @@ static void fec_get_mac(struct net_device *ndev) iap = &tmpaddr[0]; } + /* + * 5) random mac address + */ + if (!is_valid_ether_addr(iap)) { + /* Report it and use a random ethernet address instead */ + netdev_err(ndev, "Invalid MAC address: %pM\n", iap); + eth_hw_addr_random(ndev); + netdev_info(ndev, "Using random MAC address: %pM\n", + ndev->dev_addr); + return; + } + memcpy(ndev->dev_addr, iap, ETH_ALEN); /* Adjust MAC if using macaddr */ From 5b61ff43a774b9843402fb280fec6d700e1fe583 Mon Sep 17 00:00:00 2001 From: Roi Dayan Date: Wed, 8 May 2013 12:21:17 +0000 Subject: [PATCH 380/429] IB/iser: Fix device removal flow Change the code to destroy the "last opened" rdma_cm id after making sure we released all other objects (QP, CQs, PD, etc) associated with the IB device. Since iser accesses the IB device using the rdma_cm id, we need to free any objects that are related to the device that is associated with the rdma_cm id prior to destroying that id. When this isn't done, the low level driver that created this device can be unloaded before iser has a chance to free all the objects and a such a call may invoke code segment which isn't valid any more and crash. Cc: Sean Hefty Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/iser/iser_verbs.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c index 5278916c3103..f13cc227eed7 100644 --- a/drivers/infiniband/ulp/iser/iser_verbs.c +++ b/drivers/infiniband/ulp/iser/iser_verbs.c @@ -292,10 +292,10 @@ out_err: } /** - * releases the FMR pool, QP and CMA ID objects, returns 0 on success, + * releases the FMR pool and QP objects, returns 0 on success, * -1 on failure */ -static int iser_free_ib_conn_res(struct iser_conn *ib_conn, int can_destroy_id) +static int iser_free_ib_conn_res(struct iser_conn *ib_conn) { int cq_index; BUG_ON(ib_conn == NULL); @@ -314,13 +314,9 @@ static int iser_free_ib_conn_res(struct iser_conn *ib_conn, int can_destroy_id) rdma_destroy_qp(ib_conn->cma_id); } - /* if cma handler context, the caller acts s.t the cma destroy the id */ - if (ib_conn->cma_id != NULL && can_destroy_id) - rdma_destroy_id(ib_conn->cma_id); ib_conn->fmr_pool = NULL; ib_conn->qp = NULL; - ib_conn->cma_id = NULL; kfree(ib_conn->page_vec); if (ib_conn->login_buf) { @@ -415,11 +411,16 @@ static void iser_conn_release(struct iser_conn *ib_conn, int can_destroy_id) list_del(&ib_conn->conn_list); mutex_unlock(&ig.connlist_mutex); iser_free_rx_descriptors(ib_conn); - iser_free_ib_conn_res(ib_conn, can_destroy_id); + iser_free_ib_conn_res(ib_conn); ib_conn->device = NULL; /* on EVENT_ADDR_ERROR there's no device yet for this conn */ if (device != NULL) iser_device_try_release(device); + /* if cma handler context, the caller actually destroy the id */ + if (ib_conn->cma_id != NULL && can_destroy_id) { + rdma_destroy_id(ib_conn->cma_id); + ib_conn->cma_id = NULL; + } iscsi_destroy_endpoint(ib_conn->ep); } From 28f292e879a6acf745005e75196fe8f7cc504103 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Wed, 8 May 2013 12:21:18 +0000 Subject: [PATCH 381/429] IB/iser: Add Mellanox copyright Add Mellanox copyright to the iser initiator source code which I maintain. Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/iser/iscsi_iser.c | 1 + drivers/infiniband/ulp/iser/iscsi_iser.h | 1 + drivers/infiniband/ulp/iser/iser_initiator.c | 1 + drivers/infiniband/ulp/iser/iser_memory.c | 1 + drivers/infiniband/ulp/iser/iser_verbs.c | 1 + 5 files changed, 5 insertions(+) diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index f19b0998a53c..2e84ef859c5b 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -5,6 +5,7 @@ * Copyright (C) 2004 Alex Aizman * Copyright (C) 2005 Mike Christie * Copyright (c) 2005, 2006 Voltaire, Inc. All rights reserved. + * Copyright (c) 2013 Mellanox Technologies. All rights reserved. * maintained by openib-general@openib.org * * This software is available to you under a choice of one of two diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h index 06f578cde75b..4f069c0d4c04 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.h +++ b/drivers/infiniband/ulp/iser/iscsi_iser.h @@ -8,6 +8,7 @@ * * Copyright (c) 2004, 2005, 2006 Voltaire, Inc. All rights reserved. * Copyright (c) 2005, 2006 Cisco Systems. All rights reserved. + * Copyright (c) 2013 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c index a00ccd1ca333..b6d81a86c976 100644 --- a/drivers/infiniband/ulp/iser/iser_initiator.c +++ b/drivers/infiniband/ulp/iser/iser_initiator.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2004, 2005, 2006 Voltaire, Inc. All rights reserved. + * Copyright (c) 2013 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/ulp/iser/iser_memory.c b/drivers/infiniband/ulp/iser/iser_memory.c index 68ebb7fe072a..7827baf455a1 100644 --- a/drivers/infiniband/ulp/iser/iser_memory.c +++ b/drivers/infiniband/ulp/iser/iser_memory.c @@ -1,5 +1,6 @@ /* * Copyright (c) 2004, 2005, 2006 Voltaire, Inc. All rights reserved. + * Copyright (c) 2013 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c index f13cc227eed7..2c4941d0656b 100644 --- a/drivers/infiniband/ulp/iser/iser_verbs.c +++ b/drivers/infiniband/ulp/iser/iser_verbs.c @@ -1,6 +1,7 @@ /* * Copyright (c) 2004, 2005, 2006 Voltaire, Inc. All rights reserved. * Copyright (c) 2005, 2006 Cisco Systems. All rights reserved. + * Copyright (c) 2013 Mellanox Technologies. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU From 1e65eb425b660ccd7c8d3ffb353512352690c67f Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Wed, 8 May 2013 12:21:19 +0000 Subject: [PATCH 382/429] MAINTAINERS: Add entry for iSCSI Extensions for RDMA (iSER) initiator Add entry for the iSER initiator driver and which is maintained by Or Gerlitz and Roi Dayan below the kernel InfiniBand subsystem. Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- MAINTAINERS | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index f35a259a6564..8e0a84747a82 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4448,6 +4448,16 @@ S: Maintained F: drivers/scsi/*iscsi* F: include/scsi/*iscsi* +ISCSI EXTENSIONS FOR RDMA (ISER) INITIATOR +M: Or Gerlitz +M: Roi Dayan +L: linux-rdma@vger.kernel.org +S: Supported +W: http://www.openfabrics.org +W: www.open-iscsi.org +Q: http://patchwork.kernel.org/project/linux-rdma/list/ +F: drivers/infiniband/ulp/iser + ISDN SUBSYSTEM M: Karsten Keil L: isdn4linux@listserv.isdn4linux.de (subscribers-only) From f3bdf34465307fc3f6967a9202a921e11505b2e6 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Fri, 17 May 2013 12:40:32 +0000 Subject: [PATCH 383/429] IB/qib: Fix lockdep splat in qib_alloc_lkey() The following backtrace is reported with CONFIG_PROVE_RCU: drivers/infiniband/hw/qib/qib_keys.c:64 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 4 locks held by kworker/0:1/56: #0: (events){.+.+.+}, at: [] process_one_work+0x165/0x4a0 #1: ((&wfc.work)){+.+.+.}, at: [] process_one_work+0x165/0x4a0 #2: (device_mutex){+.+.+.}, at: [] ib_register_device+0x38/0x220 [ib_core] #3: (&(&dev->lk_table.lock)->rlock){......}, at: [] qib_alloc_lkey+0x3c/0x1b0 [ib_qib] stack backtrace: Pid: 56, comm: kworker/0:1 Not tainted 3.10.0-rc1+ #6 Call Trace: [] lockdep_rcu_suspicious+0xe5/0x130 [] qib_alloc_lkey+0x101/0x1b0 [ib_qib] [] qib_get_dma_mr+0xa6/0xd0 [ib_qib] [] ib_get_dma_mr+0x1a/0x50 [ib_core] [] ib_mad_port_open+0x12c/0x390 [ib_mad] [] ? trace_hardirqs_on_caller+0x105/0x190 [] ib_mad_init_device+0x52/0x110 [ib_mad] [] ? sl2vl_attr_show+0x30/0x30 [ib_qib] [] ib_register_device+0x1a9/0x220 [ib_core] [] qib_register_ib_device+0x735/0xa40 [ib_qib] [] ? mod_timer+0x118/0x220 [] qib_init_one+0x1e5/0x400 [ib_qib] [] local_pci_probe+0x4e/0x90 [] work_for_cpu_fn+0x18/0x30 [] process_one_work+0x1d6/0x4a0 [] ? process_one_work+0x165/0x4a0 [] worker_thread+0x119/0x370 [] ? manage_workers+0x180/0x180 [] kthread+0xee/0x100 [] ? __init_kthread_worker+0x70/0x70 [] ret_from_fork+0x7c/0xb0 [] ? __init_kthread_worker+0x70/0x70 Per Documentation/RCU/lockdep-splat.txt, the code now uses rcu_access_pointer() vs. rcu_dereference(). Reported-by: Jay Fenlason Reviewed-by: Dean Luick Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier --- drivers/infiniband/hw/qib/qib_keys.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/qib/qib_keys.c b/drivers/infiniband/hw/qib/qib_keys.c index 81c7b73695d2..3b9afccaaade 100644 --- a/drivers/infiniband/hw/qib/qib_keys.c +++ b/drivers/infiniband/hw/qib/qib_keys.c @@ -61,7 +61,7 @@ int qib_alloc_lkey(struct qib_mregion *mr, int dma_region) if (dma_region) { struct qib_mregion *tmr; - tmr = rcu_dereference(dev->dma_mr); + tmr = rcu_access_pointer(dev->dma_mr); if (!tmr) { qib_get_mr(mr); rcu_assign_pointer(dev->dma_mr, mr); From 44dbc78ee43d5df0bbcd7f3ae6a0ba00ed261e95 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 3 Jun 2013 02:59:57 +0000 Subject: [PATCH 384/429] bnx2x: Fix bridged GSO for 57710/57711 chips It was recently found out that GSO on 57710/57711 was broken, due to packets being sent without a valid IP checksum. Commit 057cf65 "bnx2x: Fix GSO for 57710/57711 chips" partially fixed this issue, but failed to set the correct IP checksum when receiving GSO packets via bridges, as such packets enter bnx2x_tx_split() and the FW flags needed to calculate IP checksum were erroneously set in the incorrect buffer descriptor. This patch re-enables GSO in said scenario for 57710/57711 chips. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index e3fe1ce41522..638e55435b04 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3817,8 +3817,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data, xmit_type); else - bnx2x_set_pbd_gso(skb, pbd_e1x, tx_start_bd, - xmit_type); + bnx2x_set_pbd_gso(skb, pbd_e1x, first_bd, xmit_type); } /* Set the PBD's parsing_data field if not zero From 3a5395b3d57b9e3836c755434c88f4590d5ea6f6 Mon Sep 17 00:00:00 2001 From: "Jens Renner \\(EFE\\)" Date: Mon, 3 Jun 2013 04:32:52 +0000 Subject: [PATCH 385/429] net: ethernet: xilinx_emaclite: set protocol selector bits when writing ANAR This patch sets the protocol selector bits (4:0) of the PHY's MII_ADVERTISE register (ANAR) when writing ADVERTISE_ALL. The protocol selector bits are indicating IEEE 803.3u support and are fixed / read-only on some PHYs. Not setting them correctly on others (like TI DP83630) makes the PHY fall back to 10M HDX mode which should be avoided. Tested for TI DP83630 PHY on Microblaze platform. Signed-off-by: Jens Renner Tested-by: Michal Simek Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_emaclite.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c index 919b983114e9..b7268b3dae77 100644 --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c @@ -946,7 +946,8 @@ static int xemaclite_open(struct net_device *dev) phy_write(lp->phy_dev, MII_CTRL1000, 0); /* Advertise only 10 and 100mbps full/half duplex speeds */ - phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL); + phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL | + ADVERTISE_CSMA); /* Restart auto negotiation */ bmcr = phy_read(lp->phy_dev, MII_BMCR); From 9bc297ea0622bb2a6b3abfa2fa84f0a3b86ef8c8 Mon Sep 17 00:00:00 2001 From: Nithin Sujir Date: Mon, 3 Jun 2013 09:19:34 +0000 Subject: [PATCH 386/429] tg3: Add read dma workaround for 5720 Commit 091f0ea30074bc43f9250961b3247af713024bc6 "tg3: Add New 5719 Read DMA workaround" added a workaround for TX DMA stall on the 5719. This workaround needs to be applied to the 5720 as well. Cc: stable@vger.kernel.org Reported-by: Roland Dreier Tested-by: Roland Dreier Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 21 +++++++++++++++------ drivers/net/ethernet/broadcom/tg3.h | 5 +++-- 2 files changed, 18 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 1f2dd928888a..0f493c8dc28b 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -9468,6 +9468,14 @@ static void tg3_rss_write_indir_tbl(struct tg3 *tp) } } +static inline u32 tg3_lso_rd_dma_workaround_bit(struct tg3 *tp) +{ + if (tg3_asic_rev(tp) == ASIC_REV_5719) + return TG3_LSO_RD_DMA_TX_LENGTH_WA_5719; + else + return TG3_LSO_RD_DMA_TX_LENGTH_WA_5720; +} + /* tp->lock is held. */ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) { @@ -10153,16 +10161,17 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy) tw32_f(RDMAC_MODE, rdmac_mode); udelay(40); - if (tg3_asic_rev(tp) == ASIC_REV_5719) { + if (tg3_asic_rev(tp) == ASIC_REV_5719 || + tg3_asic_rev(tp) == ASIC_REV_5720) { for (i = 0; i < TG3_NUM_RDMA_CHANNELS; i++) { if (tr32(TG3_RDMA_LENGTH + (i << 2)) > TG3_MAX_MTU(tp)) break; } if (i < TG3_NUM_RDMA_CHANNELS) { val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL); - val |= TG3_LSO_RD_DMA_TX_LENGTH_WA; + val |= tg3_lso_rd_dma_workaround_bit(tp); tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val); - tg3_flag_set(tp, 5719_RDMA_BUG); + tg3_flag_set(tp, 5719_5720_RDMA_BUG); } } @@ -10526,15 +10535,15 @@ static void tg3_periodic_fetch_stats(struct tg3 *tp) TG3_STAT_ADD32(&sp->tx_ucast_packets, MAC_TX_STATS_UCAST); TG3_STAT_ADD32(&sp->tx_mcast_packets, MAC_TX_STATS_MCAST); TG3_STAT_ADD32(&sp->tx_bcast_packets, MAC_TX_STATS_BCAST); - if (unlikely(tg3_flag(tp, 5719_RDMA_BUG) && + if (unlikely(tg3_flag(tp, 5719_5720_RDMA_BUG) && (sp->tx_ucast_packets.low + sp->tx_mcast_packets.low + sp->tx_bcast_packets.low) > TG3_NUM_RDMA_CHANNELS)) { u32 val; val = tr32(TG3_LSO_RD_DMA_CRPTEN_CTRL); - val &= ~TG3_LSO_RD_DMA_TX_LENGTH_WA; + val &= ~tg3_lso_rd_dma_workaround_bit(tp); tw32(TG3_LSO_RD_DMA_CRPTEN_CTRL, val); - tg3_flag_clear(tp, 5719_RDMA_BUG); + tg3_flag_clear(tp, 5719_5720_RDMA_BUG); } TG3_STAT_ADD32(&sp->rx_octets, MAC_RX_STATS_OCTETS); diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h index 9b2d3ac2474a..ff6e30eeae35 100644 --- a/drivers/net/ethernet/broadcom/tg3.h +++ b/drivers/net/ethernet/broadcom/tg3.h @@ -1422,7 +1422,8 @@ #define TG3_LSO_RD_DMA_CRPTEN_CTRL 0x00004910 #define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_BD_4K 0x00030000 #define TG3_LSO_RD_DMA_CRPTEN_CTRL_BLEN_LSO_4K 0x000c0000 -#define TG3_LSO_RD_DMA_TX_LENGTH_WA 0x02000000 +#define TG3_LSO_RD_DMA_TX_LENGTH_WA_5719 0x02000000 +#define TG3_LSO_RD_DMA_TX_LENGTH_WA_5720 0x00200000 /* 0x4914 --> 0x4be0 unused */ #define TG3_NUM_RDMA_CHANNELS 4 @@ -3059,7 +3060,7 @@ enum TG3_FLAGS { TG3_FLAG_APE_HAS_NCSI, TG3_FLAG_TX_TSTAMP_EN, TG3_FLAG_4K_FIFO_LIMIT, - TG3_FLAG_5719_RDMA_BUG, + TG3_FLAG_5719_5720_RDMA_BUG, TG3_FLAG_RESET_TASK_PENDING, TG3_FLAG_PTP_CAPABLE, TG3_FLAG_5705_PLUS, From 5e71d9d77c07fa7d4c42287a177f7b738d0cd4b9 Mon Sep 17 00:00:00 2001 From: Pablo Neira Date: Mon, 3 Jun 2013 09:28:43 +0000 Subject: [PATCH 387/429] net: fix sk_buff head without data area Eric Dumazet spotted that we have to check skb->head instead of skb->data as skb->head points to the beginning of the data area of the skbuff. Similarly, we have to initialize the skb->head pointer, not skb->data in __alloc_skb_head. After this fix, netlink crashes in the release path of the sk_buff, so let's fix that as well. This bug was introduced in (0ebd0ac net: add function to allocate sk_buff head without data area). Reported-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- net/core/skbuff.c | 4 ++-- net/netlink/af_netlink.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index af9185d0be6a..cfd777bd6bd0 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -195,7 +195,7 @@ struct sk_buff *__alloc_skb_head(gfp_t gfp_mask, int node) * the tail pointer in struct sk_buff! */ memset(skb, 0, offsetof(struct sk_buff, tail)); - skb->data = NULL; + skb->head = NULL; skb->truesize = sizeof(struct sk_buff); atomic_set(&skb->users, 1); @@ -611,7 +611,7 @@ static void skb_release_head_state(struct sk_buff *skb) static void skb_release_all(struct sk_buff *skb) { skb_release_head_state(skb); - if (likely(skb->data)) + if (likely(skb->head)) skb_release_data(skb); } diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 12ac6b47a35c..d0b3dd60d386 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -747,7 +747,7 @@ static void netlink_skb_destructor(struct sk_buff *skb) atomic_dec(&ring->pending); sock_put(sk); - skb->data = NULL; + skb->head = NULL; } #endif if (skb->sk != NULL) From 5343a7f8be11951cb3095b91e8e4eb506cfacc0f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 4 Jun 2013 07:11:48 +0000 Subject: [PATCH 388/429] net_sched: htb: do not mix 1ns and 64ns time units commit 56b765b79 ("htb: improved accuracy at high rates") added another regression for low rates, because it mixes 1ns and 64ns time units. So the maximum delay (mbuffer) was not 60 second, but 937 ms. Lets convert all time fields to 1ns as 64bit arches are becoming the norm. Reported-by: Jesper Dangaard Brouer Signed-off-by: Eric Dumazet Tested-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- net/sched/sch_htb.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index f87fb850b7ef..adaedd79389c 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -109,7 +109,7 @@ struct htb_class { } un; struct rb_node node[TC_HTB_NUMPRIO]; /* node for self or feed tree */ struct rb_node pq_node; /* node for event queue */ - psched_time_t pq_key; + s64 pq_key; int prio_activity; /* for which prios are we active */ enum htb_cmode cmode; /* current mode of the class */ @@ -121,10 +121,10 @@ struct htb_class { /* token bucket parameters */ struct psched_ratecfg rate; struct psched_ratecfg ceil; - s64 buffer, cbuffer; /* token bucket depth/rate */ - psched_tdiff_t mbuffer; /* max wait time */ - s64 tokens, ctokens; /* current number of tokens */ - psched_time_t t_c; /* checkpoint time */ + s64 buffer, cbuffer; /* token bucket depth/rate */ + s64 mbuffer; /* max wait time */ + s64 tokens, ctokens; /* current number of tokens */ + s64 t_c; /* checkpoint time */ }; struct htb_sched { @@ -141,15 +141,15 @@ struct htb_sched { struct rb_root wait_pq[TC_HTB_MAXDEPTH]; /* time of nearest event per level (row) */ - psched_time_t near_ev_cache[TC_HTB_MAXDEPTH]; + s64 near_ev_cache[TC_HTB_MAXDEPTH]; int defcls; /* class where unclassified flows go to */ /* filters for qdisc itself */ struct tcf_proto *filter_list; - int rate2quantum; /* quant = rate / rate2quantum */ - psched_time_t now; /* cached dequeue time */ + int rate2quantum; /* quant = rate / rate2quantum */ + s64 now; /* cached dequeue time */ struct qdisc_watchdog watchdog; /* non shaped skbs; let them go directly thru */ @@ -664,8 +664,8 @@ static void htb_charge_class(struct htb_sched *q, struct htb_class *cl, * next pending event (0 for no event in pq, q->now for too many events). * Note: Applied are events whose have cl->pq_key <= q->now. */ -static psched_time_t htb_do_events(struct htb_sched *q, int level, - unsigned long start) +static s64 htb_do_events(struct htb_sched *q, int level, + unsigned long start) { /* don't run for longer than 2 jiffies; 2 is used instead of * 1 to simplify things when jiffy is going to be incremented @@ -857,7 +857,7 @@ static struct sk_buff *htb_dequeue(struct Qdisc *sch) struct sk_buff *skb; struct htb_sched *q = qdisc_priv(sch); int level; - psched_time_t next_event; + s64 next_event; unsigned long start_at; /* try to dequeue direct packets as high prio (!) to minimize cpu work */ @@ -880,7 +880,7 @@ ok: for (level = 0; level < TC_HTB_MAXDEPTH; level++) { /* common case optimization - skip event handler quickly */ int m; - psched_time_t event; + s64 event; if (q->now >= q->near_ev_cache[level]) { event = htb_do_events(q, level, start_at); @@ -1117,8 +1117,8 @@ htb_dump_class_stats(struct Qdisc *sch, unsigned long arg, struct gnet_dump *d) if (!cl->level && cl->un.leaf.q) cl->qstats.qlen = cl->un.leaf.q->q.qlen; - cl->xstats.tokens = cl->tokens; - cl->xstats.ctokens = cl->ctokens; + cl->xstats.tokens = PSCHED_NS2TICKS(cl->tokens); + cl->xstats.ctokens = PSCHED_NS2TICKS(cl->ctokens); if (gnet_stats_copy_basic(d, &cl->bstats) < 0 || gnet_stats_copy_rate_est(d, NULL, &cl->rate_est) < 0 || @@ -1200,7 +1200,7 @@ static void htb_parent_to_leaf(struct htb_sched *q, struct htb_class *cl, parent->un.leaf.q = new_q ? new_q : &noop_qdisc; parent->tokens = parent->buffer; parent->ctokens = parent->cbuffer; - parent->t_c = psched_get_time(); + parent->t_c = ktime_to_ns(ktime_get()); parent->cmode = HTB_CAN_SEND; } @@ -1417,8 +1417,8 @@ static int htb_change_class(struct Qdisc *sch, u32 classid, /* set class to be in HTB_CAN_SEND state */ cl->tokens = PSCHED_TICKS2NS(hopt->buffer); cl->ctokens = PSCHED_TICKS2NS(hopt->cbuffer); - cl->mbuffer = 60 * PSCHED_TICKS_PER_SEC; /* 1min */ - cl->t_c = psched_get_time(); + cl->mbuffer = 60ULL * NSEC_PER_SEC; /* 1min */ + cl->t_c = ktime_to_ns(ktime_get()); cl->cmode = HTB_CAN_SEND; /* attach to the hash list and parent's family */ From beba44b17d572ebb4909c1327360918ee4d89e43 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Mon, 20 May 2013 19:14:00 +0200 Subject: [PATCH 389/429] drm/nv84/disp: Fix HDMI audio regression Code refactoring in commit 8e9e3d2deacc460fbb8a4691140318f6e85e6891 (drm/nv84/disp: move hdmi control into core) disabled HDMI audio on my nv84 by removing too much old code without adding it in the new one. This patch adds the missing code within the new code layout resulting in HDMI audio working again. It should work on any HDMI head, but due to lacking ahrdware I could only test the (1st) one. It also might be possible that similar code is needed for nva3, which I can't test. Signed-off-by: Alexander Stein Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/disp/hdminv84.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/hdminv84.c b/drivers/gpu/drm/nouveau/core/engine/disp/hdminv84.c index 0d36bdc51417..7fdade6e604d 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/hdminv84.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/hdminv84.c @@ -55,6 +55,10 @@ nv84_hdmi_ctrl(struct nv50_disp_priv *priv, int head, int or, u32 data) nv_wr32(priv, 0x616510 + hoff, 0x00000000); nv_mask(priv, 0x616500 + hoff, 0x00000001, 0x00000001); + nv_mask(priv, 0x6165d0 + hoff, 0x00070001, 0x00010001); /* SPARE, HW_CTS */ + nv_mask(priv, 0x616568 + hoff, 0x00010101, 0x00000000); /* ACR_CTRL, ?? */ + nv_mask(priv, 0x616578 + hoff, 0x80000000, 0x80000000); /* ACR_0441_ENABLE */ + /* ??? */ nv_mask(priv, 0x61733c, 0x00100000, 0x00100000); /* RESETF */ nv_mask(priv, 0x61733c, 0x10000000, 0x10000000); /* LOOKUP_EN */ From 89e033a4bc688bc6631c6de8b66d7f26f8e0652b Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 3 Jun 2013 15:43:30 +1000 Subject: [PATCH 390/429] drm/nv50-nv84/fifo: fix resume regression introduced by playlist race fix Reported-by: Maarten Maathuis Reported-by: Sven Joachim Reported-by: Konrad Rzeszutek Wilk Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c b/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c index 89bf459d584b..e9b8217d0075 100644 --- a/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/fifo/nv50.c @@ -40,14 +40,13 @@ * FIFO channel objects ******************************************************************************/ -void -nv50_fifo_playlist_update(struct nv50_fifo_priv *priv) +static void +nv50_fifo_playlist_update_locked(struct nv50_fifo_priv *priv) { struct nouveau_bar *bar = nouveau_bar(priv); struct nouveau_gpuobj *cur; int i, p; - mutex_lock(&nv_subdev(priv)->mutex); cur = priv->playlist[priv->cur_playlist]; priv->cur_playlist = !priv->cur_playlist; @@ -61,6 +60,13 @@ nv50_fifo_playlist_update(struct nv50_fifo_priv *priv) nv_wr32(priv, 0x0032f4, cur->addr >> 12); nv_wr32(priv, 0x0032ec, p); nv_wr32(priv, 0x002500, 0x00000101); +} + +void +nv50_fifo_playlist_update(struct nv50_fifo_priv *priv) +{ + mutex_lock(&nv_subdev(priv)->mutex); + nv50_fifo_playlist_update_locked(priv); mutex_unlock(&nv_subdev(priv)->mutex); } @@ -489,7 +495,7 @@ nv50_fifo_init(struct nouveau_object *object) for (i = 0; i < 128; i++) nv_wr32(priv, 0x002600 + (i * 4), 0x00000000); - nv50_fifo_playlist_update(priv); + nv50_fifo_playlist_update_locked(priv); nv_wr32(priv, 0x003200, 0x00000001); nv_wr32(priv, 0x003250, 0x00000001); From ea9197cc323839ef3d5280c0453b2c622caa6bc7 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 3 Jun 2013 16:07:06 +1000 Subject: [PATCH 391/429] drm/nv50/disp: force dac power state during load detect MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fdo#64904 Reported-by: Gerhard Bräunlich Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c | 4 ++++ drivers/gpu/drm/nouveau/core/include/core/class.h | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c index d0817d94454c..a60a5accb540 100644 --- a/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c +++ b/drivers/gpu/drm/nouveau/core/engine/disp/dacnv50.c @@ -50,11 +50,15 @@ nv50_dac_sense(struct nv50_disp_priv *priv, int or, u32 loadval) { const u32 doff = (or * 0x800); int load = -EINVAL; + nv_mask(priv, 0x61a004 + doff, 0x807f0000, 0x80150000); + nv_wait(priv, 0x61a004 + doff, 0x80000000, 0x00000000); nv_wr32(priv, 0x61a00c + doff, 0x00100000 | loadval); udelay(9500); nv_wr32(priv, 0x61a00c + doff, 0x80000000); load = (nv_rd32(priv, 0x61a00c + doff) & 0x38000000) >> 27; nv_wr32(priv, 0x61a00c + doff, 0x00000000); + nv_mask(priv, 0x61a004 + doff, 0x807f0000, 0x80550000); + nv_wait(priv, 0x61a004 + doff, 0x80000000, 0x00000000); return load; } diff --git a/drivers/gpu/drm/nouveau/core/include/core/class.h b/drivers/gpu/drm/nouveau/core/include/core/class.h index 0a393f7f055f..5a5961b6a6a3 100644 --- a/drivers/gpu/drm/nouveau/core/include/core/class.h +++ b/drivers/gpu/drm/nouveau/core/include/core/class.h @@ -218,7 +218,7 @@ struct nv04_display_class { #define NV50_DISP_DAC_PWR_STATE 0x00000040 #define NV50_DISP_DAC_PWR_STATE_ON 0x00000000 #define NV50_DISP_DAC_PWR_STATE_OFF 0x00000040 -#define NV50_DISP_DAC_LOAD 0x0002000c +#define NV50_DISP_DAC_LOAD 0x00020100 #define NV50_DISP_DAC_LOAD_VALUE 0x00000007 #define NV50_DISP_PIOR_MTHD 0x00030000 From d40ee48acde16894fb3b241d7e896d5fa84e0f10 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Mon, 3 Jun 2013 16:40:14 +1000 Subject: [PATCH 392/429] drm/nv50/kms: use dac loadval from vbios, where it's available Regression from merging the old nv50/nvd9 code together, and may be needed to fully fix fdo#64904. The value is ignored completely by the hardware starting from nva3. Reported-by: Emil Velikov Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv50_display.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c index 325887390677..e843cf86bcce 100644 --- a/drivers/gpu/drm/nouveau/nv50_display.c +++ b/drivers/gpu/drm/nouveau/nv50_display.c @@ -1554,7 +1554,9 @@ nv50_dac_detect(struct drm_encoder *encoder, struct drm_connector *connector) { struct nv50_disp *disp = nv50_disp(encoder->dev); int ret, or = nouveau_encoder(encoder)->or; - u32 load = 0; + u32 load = nouveau_drm(encoder->dev)->vbios.dactestval; + if (load == 0) + load = 340; ret = nv_exec(disp->core, NV50_DISP_DAC_LOAD + or, &load, sizeof(load)); if (ret || load != 7) From 11e7064f35bb87da8f427d1aa4bbd8b7473a3993 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 5 Jun 2013 08:35:26 +0200 Subject: [PATCH 393/429] ALSA: usb-audio - Fix invalid volume resolution on Logitech HD webcam c270 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit USB audio driver spews an error message when probing Logitech HD webcam c270: ALSA mixer.c:1300 usb_audio: Warning! Unlikely big volume range (=6144), cval->res is probably wrong. ALSA mixer.c:1304 usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7680/1 Obviously the device needs a fixed volume resolution (cval->res = 384) like other Logitech devices. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=821735 Reported-and-tested-by: Cristian Rodríguez Cc: Signed-off-by: Takashi Iwai --- sound/usb/mixer.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index ca4739c3f650..e5c7f9f20fdd 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -886,6 +886,7 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, case USB_ID(0x046d, 0x0808): case USB_ID(0x046d, 0x0809): case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */ + case USB_ID(0x046d, 0x0825): /* HD Webcam c270 */ case USB_ID(0x046d, 0x0991): /* Most audio usb devices lie about volume resolution. * Most Logitech webcams have res = 384. From bc5abcf7e411b889f73ea2a90439071a0f451011 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Tue, 4 Jun 2013 10:24:56 -0700 Subject: [PATCH 394/429] eCryptfs: Check return of filemap_write_and_wait during fsync Error out of ecryptfs_fsync() if filemap_write_and_wait() fails. Signed-off-by: Tyler Hicks Cc: Paul Taysom Cc: Olof Johansson Cc: stable@vger.kernel.org # v3.6+ --- fs/ecryptfs/file.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index 16f509d6fa49..a7abbea2c096 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -295,7 +295,12 @@ static int ecryptfs_release(struct inode *inode, struct file *file) static int ecryptfs_fsync(struct file *file, loff_t start, loff_t end, int datasync) { - filemap_write_and_wait(file->f_mapping); + int rc; + + rc = filemap_write_and_wait(file->f_mapping); + if (rc) + return rc; + return vfs_fsync(ecryptfs_file_to_lower(file), datasync); } From 8673b83bf2f013379453b4779047bf3c6ae387e4 Mon Sep 17 00:00:00 2001 From: Ross Lagerwall Date: Fri, 31 May 2013 20:45:17 +0100 Subject: [PATCH 395/429] acpi-cpufreq: set current frequency based on target P-State Commit 4b31e774 (Always set P-state on initialization) fixed bug #4634 and caused the driver to always set the target P-State at least once since the initial P-State may not be the desired one. Commit 5a1c0228 (cpufreq: Avoid calling cpufreq driver's target() routine if target_freq == policy->cur) caused a regression in this behavior. This fixes the regression by setting policy->cur based on the CPU's target frequency rather than the CPU's current reported frequency (which may be different). This means that the P-State will be set initially if the CPU's target frequency is different from the governor's target frequency. This fixes an issue where setting the default governor to performance wouldn't correctly enable turbo mode on all cores. Signed-off-by: Ross Lagerwall Reviewed-by: Len Brown Acked-by: Viresh Kumar Cc: 3.8+ Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/acpi-cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c index 11b8b4b54ceb..edc089e9d0c4 100644 --- a/drivers/cpufreq/acpi-cpufreq.c +++ b/drivers/cpufreq/acpi-cpufreq.c @@ -347,11 +347,11 @@ static u32 get_cur_val(const struct cpumask *mask) switch (per_cpu(acfreq_data, cpumask_first(mask))->cpu_feature) { case SYSTEM_INTEL_MSR_CAPABLE: cmd.type = SYSTEM_INTEL_MSR_CAPABLE; - cmd.addr.msr.reg = MSR_IA32_PERF_STATUS; + cmd.addr.msr.reg = MSR_IA32_PERF_CTL; break; case SYSTEM_AMD_MSR_CAPABLE: cmd.type = SYSTEM_AMD_MSR_CAPABLE; - cmd.addr.msr.reg = MSR_AMD_PERF_STATUS; + cmd.addr.msr.reg = MSR_AMD_PERF_CTL; break; case SYSTEM_IO_CAPABLE: cmd.type = SYSTEM_IO_CAPABLE; From a98d4f64a20b2b88697e7e08c871144a7e3f0ec4 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 3 Jun 2013 02:08:39 +0000 Subject: [PATCH 396/429] ACPI / APEI: fix error return code in ghes_probe() Fix to return a negative error code in the acpi_gsi_to_irq() and request_irq() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Reviewed-by: Huang Ying Signed-off-by: Rafael J. Wysocki --- drivers/acpi/apei/ghes.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index d668a8ae602b..ea750ed7c264 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -917,13 +917,14 @@ static int ghes_probe(struct platform_device *ghes_dev) break; case ACPI_HEST_NOTIFY_EXTERNAL: /* External interrupt vector is GSI */ - if (acpi_gsi_to_irq(generic->notify.vector, &ghes->irq)) { + rc = acpi_gsi_to_irq(generic->notify.vector, &ghes->irq); + if (rc) { pr_err(GHES_PFX "Failed to map GSI to IRQ for generic hardware error source: %d\n", generic->header.source_id); goto err_edac_unreg; } - if (request_irq(ghes->irq, ghes_irq_func, - 0, "GHES IRQ", ghes)) { + rc = request_irq(ghes->irq, ghes_irq_func, 0, "GHES IRQ", ghes); + if (rc) { pr_err(GHES_PFX "Failed to register IRQ for generic hardware error source: %d\n", generic->header.source_id); goto err_edac_unreg; From 9f29ab11ddbfc12db54df5a66dab22b39ad94e8e Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Tue, 4 Jun 2013 23:02:58 +0200 Subject: [PATCH 397/429] ACPI / scan: do not match drivers against objects having scan handlers With the introduction of ACPI scan handlers, an ACPI device object with an ACPI scan handler attached to it must not be bound to an ACPI driver any more. Therefore it doesn't make sense to match those ACPI device objects against a newly registered ACPI driver in acpi_bus_match(), so make that function return 0 if the device object passed to it has an ACPI scan handler attached. This also addresses a regression related to a broken ACPI table in the BIOS, where it has defined a _ROM method under the PCI root bridge object. This causes the video module to treat that object as a display controller device (since only display devices are supposed to have a _ROM method defined according to the ACPI spec). As a result, the ACPI video driver binds to the PCI root bridge object and overwrites the previously assigned driver_data field of it, causing subsequent calls to acpi_get_pci_dev() to fail. [rjw: Subject and changelog] References: https://bugzilla.kernel.org/show_bug.cgi?id=58091 Reported-by: Jason Cassell Reported-and-bisected-by: Dmitry S. Demin Cc: 3.9+ Signed-off-by: Aaron Lu Signed-off-by: Rafael J. Wysocki --- drivers/acpi/scan.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 44225cb15f3a..90c5759e1355 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -740,6 +740,10 @@ static int acpi_bus_match(struct device *dev, struct device_driver *drv) struct acpi_device *acpi_dev = to_acpi_device(dev); struct acpi_driver *acpi_drv = to_acpi_driver(drv); + /* Skip ACPI device objects with scan handlers attached. */ + if (acpi_dev->handler) + return 0; + return acpi_dev->flags.match_driver && !acpi_match_device_ids(acpi_dev, acpi_drv->ids); } From 2f7021a815f20f3481c10884fe9735ce2a56db35 Mon Sep 17 00:00:00 2001 From: Michael Wang Date: Wed, 5 Jun 2013 08:49:37 +0000 Subject: [PATCH 398/429] cpufreq: protect 'policy->cpus' from offlining during __gov_queue_work() Jiri Kosina and Borislav Petkov reported the warning: [ 51.616759] ------------[ cut here ]------------ [ 51.621460] WARNING: at arch/x86/kernel/smp.c:123 native_smp_send_reschedule+0x58/0x60() [ 51.629638] Modules linked in: ext2 vfat fat loop snd_hda_codec_hdmi usbhid snd_hda_codec_realtek coretemp kvm_intel kvm snd_hda_intel snd_hda_codec crc32_pclmul crc32c_intel ghash_clmulni_intel snd_hwdep snd_pcm aesni_intel sb_edac aes_x86_64 ehci_pci snd_page_alloc glue_helper snd_timer xhci_hcd snd iTCO_wdt iTCO_vendor_support ehci_hcd edac_core lpc_ich acpi_cpufreq lrw gf128mul ablk_helper cryptd mperf usbcore usb_common soundcore mfd_core dcdbas evdev pcspkr processor i2c_i801 button microcode [ 51.675581] CPU: 0 PID: 244 Comm: kworker/1:1 Tainted: G W 3.10.0-rc1+ #10 [ 51.683407] Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 [ 51.690901] Workqueue: events od_dbs_timer [ 51.695069] 0000000000000009 ffff88043a2f5b68 ffffffff8161441c ffff88043a2f5ba8 [ 51.702602] ffffffff8103e540 0000000000000033 0000000000000001 ffff88043d5f8000 [ 51.710136] 00000000ffff0ce1 0000000000000001 ffff88044fc4fc08 ffff88043a2f5bb8 [ 51.717691] Call Trace: [ 51.720191] [] dump_stack+0x19/0x1b [ 51.725396] [] warn_slowpath_common+0x70/0xa0 [ 51.731473] [] warn_slowpath_null+0x1a/0x20 [ 51.737378] [] native_smp_send_reschedule+0x58/0x60 [ 51.744013] [] wake_up_nohz_cpu+0x2d/0xa0 [ 51.749745] [] add_timer_on+0x8f/0x110 [ 51.755214] [] __queue_delayed_work+0x16e/0x1a0 [ 51.761470] [] ? try_to_grab_pending+0xd1/0x1a0 [ 51.767724] [] mod_delayed_work_on+0x5a/0xa0 [ 51.773719] [] gov_queue_work+0x4d/0xc0 [ 51.779271] [] od_dbs_timer+0xcb/0x170 [ 51.784734] [] process_one_work+0x1fd/0x540 [ 51.790634] [] ? process_one_work+0x192/0x540 [ 51.796711] [] worker_thread+0x122/0x380 [ 51.802350] [] ? rescuer_thread+0x320/0x320 [ 51.808264] [] kthread+0xea/0xf0 [ 51.813200] [] ? flush_kthread_worker+0x150/0x150 [ 51.819644] [] ret_from_fork+0x7c/0xb0 [ 51.918165] nouveau E[ DRM] GPU lockup - switching to software fbcon [ 51.930505] [] ? flush_kthread_worker+0x150/0x150 [ 51.936994] ---[ end trace f419538ada83b5c5 ]--- It was caused by the policy->cpus changed during the process of __gov_queue_work(), in other word, cpu offline happened. Use get/put_online_cpus() to prevent the offline from happening while __gov_queue_work() is running. [rjw: The problem has been present since recent commit 031299b (cpufreq: governors: Avoid unnecessary per cpu timer interrupts)] References: https://lkml.org/lkml/2013/6/5/88 Reported-by: Borislav Petkov Reported-and-tested-by: Jiri Kosina Signed-off-by: Michael Wang Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq_governor.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c index 5af40ad82d23..dc9b72e25c1a 100644 --- a/drivers/cpufreq/cpufreq_governor.c +++ b/drivers/cpufreq/cpufreq_governor.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "cpufreq_governor.h" @@ -180,8 +181,10 @@ void gov_queue_work(struct dbs_data *dbs_data, struct cpufreq_policy *policy, if (!all_cpus) { __gov_queue_work(smp_processor_id(), dbs_data, delay); } else { + get_online_cpus(); for_each_cpu(i, policy->cpus) __gov_queue_work(i, dbs_data, delay); + put_online_cpus(); } } EXPORT_SYMBOL_GPL(gov_queue_work); From 0ca684365547cd5f214b5739568dae3df5d6cec9 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 25 Feb 2013 18:22:37 +0100 Subject: [PATCH 399/429] cpufreq: cpufreq-cpu0: use the exact frequency for clk_set_rate() clk_set_rate() isn't supposed to accept approximate frequencies, instead a supported frequency should be obtained from clk_round_rate() and then used to set the clock. Signed-off-by: Guennadi Liakhovetski Acked-by: Shawn Guo Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/cpufreq-cpu0.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c index a64eb8b70444..ad1fde277661 100644 --- a/drivers/cpufreq/cpufreq-cpu0.c +++ b/drivers/cpufreq/cpufreq-cpu0.c @@ -45,7 +45,7 @@ static int cpu0_set_target(struct cpufreq_policy *policy, struct cpufreq_freqs freqs; struct opp *opp; unsigned long volt = 0, volt_old = 0, tol = 0; - long freq_Hz; + long freq_Hz, freq_exact; unsigned int index; int ret; @@ -60,6 +60,7 @@ static int cpu0_set_target(struct cpufreq_policy *policy, freq_Hz = clk_round_rate(cpu_clk, freq_table[index].frequency * 1000); if (freq_Hz < 0) freq_Hz = freq_table[index].frequency * 1000; + freq_exact = freq_Hz; freqs.new = freq_Hz / 1000; freqs.old = clk_get_rate(cpu_clk) / 1000; @@ -98,7 +99,7 @@ static int cpu0_set_target(struct cpufreq_policy *policy, } } - ret = clk_set_rate(cpu_clk, freqs.new * 1000); + ret = clk_set_rate(cpu_clk, freq_exact); if (ret) { pr_err("failed to set clock rate: %d\n", ret); if (cpu_reg) From 9a6aa279d3d17af73a029fa40654e92f4e75e8bb Mon Sep 17 00:00:00 2001 From: Alexey Kardashevskiy Date: Wed, 5 Jun 2013 08:54:16 -0600 Subject: [PATCH 400/429] vfio: fix crash on rmmod devtmpfs_delete_node() calls devnode() callback with mode==NULL but vfio still tries to write there. The patch fixes this. Signed-off-by: Alexey Kardashevskiy Signed-off-by: Alex Williamson --- drivers/vfio/vfio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c index acb7121a9316..6d78736563de 100644 --- a/drivers/vfio/vfio.c +++ b/drivers/vfio/vfio.c @@ -1360,7 +1360,7 @@ static const struct file_operations vfio_device_fops = { */ static char *vfio_devnode(struct device *dev, umode_t *mode) { - if (MINOR(dev->devt) == 0) + if (mode && (MINOR(dev->devt) == 0)) *mode = S_IRUGO | S_IWUGO; return kasprintf(GFP_KERNEL, "vfio/%s", dev_name(dev)); From f4488035abdac56682153aa0cff3d1dce84e1c54 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 5 Jun 2013 12:21:11 +0200 Subject: [PATCH 401/429] USB: serial: fix TIOCMIWAIT return value Fix regression introduced by commit 143d9d9616 ("USB: serial: add tiocmiwait subdriver operation") which made the ioctl operation return ENODEV rather than ENOIOCTLCMD when a subdriver TIOCMIWAIT implementation is missing. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 4753c005cfb6..5f6b1ff9d29e 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -408,7 +408,7 @@ static int serial_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; - int retval = -ENODEV; + int retval = -ENOIOCTLCMD; dev_dbg(tty->dev, "%s - cmd 0x%.4x\n", __func__, cmd); @@ -420,8 +420,6 @@ static int serial_ioctl(struct tty_struct *tty, default: if (port->serial->type->ioctl) retval = port->serial->type->ioctl(tty, cmd, arg); - else - retval = -ENOIOCTLCMD; } return retval; From 65694c5aaddfedd9da082e4e150cafc6b3fc8a6a Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Wed, 5 Jun 2013 15:15:41 +0100 Subject: [PATCH 402/429] x86/PCI: Map PCI setup data with ioremap() so it can be in highmem f9a37be0f0 ("x86: Use PCI setup data") added support for using PCI ROM images from setup_data. This used phys_to_virt(), which is not valid for highmem addresses, and can cause a crash when booting a 32-bit kernel via the EFI boot stub. pcibios_add_device() assumes that the physical addresses stored in setup_data are accessible via the direct kernel mapping, and that calling phys_to_virt() is valid. This isn't guaranteed to be true on x86 where the direct mapping range is much smaller than on x86-64. Calling phys_to_virt() on a highmem address results in the following: BUG: unable to handle kernel paging request at 39a3c198 IP: [] pcibios_add_device+0x2f/0x90 ... Call Trace: [] pci_device_add+0xe3/0x130 [] pci_scan_single_device+0x8b/0xb0 [] pci_scan_slot+0x48/0x100 [] pci_scan_child_bus+0x24/0xc0 [] pci_acpi_scan_root+0x2c0/0x490 [] acpi_pci_root_add+0x312/0x42f ... The solution is to use ioremap() instead of phys_to_virt() to map the setup data into the kernel address space. [bhelgaas: changelog] Tested-by: Jani Nikula Signed-off-by: Matt Fleming Signed-off-by: Bjorn Helgaas Cc: Matthew Garrett Cc: Seth Forshee Cc: Jesse Barnes Cc: stable@vger.kernel.org # v3.8+ --- arch/x86/pci/common.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 305c68b8d538..981c2dbd72cc 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -628,7 +628,9 @@ int pcibios_add_device(struct pci_dev *dev) pa_data = boot_params.hdr.setup_data; while (pa_data) { - data = phys_to_virt(pa_data); + data = ioremap(pa_data, sizeof(*rom)); + if (!data) + return -ENOMEM; if (data->type == SETUP_PCI) { rom = (struct pci_setup_rom *)data; @@ -645,6 +647,7 @@ int pcibios_add_device(struct pci_dev *dev) } } pa_data = data->next; + iounmap(data); } return 0; } From 29eb77825cc7da8d45b642de2de3d423dc8a363f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 5 Jun 2013 12:26:50 +0200 Subject: [PATCH 403/429] arch, mm: Remove tlb_fast_mode() Since the introduction of preemptible mmu_gather TLB fast mode has been broken. TLB fast mode relies on there being absolutely no concurrency; it frees pages first and invalidates TLBs later. However now we can get concurrency and stuff goes *bang*. This patch removes all tlb_fast_mode() code; it was found the better option vs trying to patch the hole by entangling tlb invalidation with the scheduler. Cc: Thomas Gleixner Cc: Russell King Cc: Tony Luck Reported-by: Max Filippov Signed-off-by: Peter Zijlstra Signed-off-by: Linus Torvalds --- arch/arm/include/asm/tlb.h | 27 ++++-------------------- arch/ia64/include/asm/tlb.h | 41 ++++++++----------------------------- include/asm-generic/tlb.h | 17 +-------------- mm/memory.c | 9 -------- 4 files changed, 13 insertions(+), 81 deletions(-) diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 99a19512ee26..bdf2b8458ec1 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -33,18 +33,6 @@ #include #include -/* - * We need to delay page freeing for SMP as other CPUs can access pages - * which have been removed but not yet had their TLB entries invalidated. - * Also, as ARMv7 speculative prefetch can drag new entries into the TLB, - * we need to apply this same delaying tactic to ensure correct operation. - */ -#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7) -#define tlb_fast_mode(tlb) 0 -#else -#define tlb_fast_mode(tlb) 1 -#endif - #define MMU_GATHER_BUNDLE 8 /* @@ -112,12 +100,10 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb) static inline void tlb_flush_mmu(struct mmu_gather *tlb) { tlb_flush(tlb); - if (!tlb_fast_mode(tlb)) { - free_pages_and_swap_cache(tlb->pages, tlb->nr); - tlb->nr = 0; - if (tlb->pages == tlb->local) - __tlb_alloc_page(tlb); - } + free_pages_and_swap_cache(tlb->pages, tlb->nr); + tlb->nr = 0; + if (tlb->pages == tlb->local) + __tlb_alloc_page(tlb); } static inline void @@ -178,11 +164,6 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { - if (tlb_fast_mode(tlb)) { - free_page_and_swap_cache(page); - return 1; /* avoid calling tlb_flush_mmu */ - } - tlb->pages[tlb->nr++] = page; VM_BUG_ON(tlb->nr > tlb->max); return tlb->max - tlb->nr; diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index c3ffe3e54edc..ef3a9de01954 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -46,12 +46,6 @@ #include #include -#ifdef CONFIG_SMP -# define tlb_fast_mode(tlb) ((tlb)->nr == ~0U) -#else -# define tlb_fast_mode(tlb) (1) -#endif - /* * If we can't allocate a page to make a big batch of page pointers * to work on, then just handle a few from the on-stack structure. @@ -60,7 +54,7 @@ struct mmu_gather { struct mm_struct *mm; - unsigned int nr; /* == ~0U => fast mode */ + unsigned int nr; unsigned int max; unsigned char fullmm; /* non-zero means full mm flush */ unsigned char need_flush; /* really unmapped some PTEs? */ @@ -103,6 +97,7 @@ extern struct ia64_tr_entry *ia64_idtrs[NR_CPUS]; static inline void ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end) { + unsigned long i; unsigned int nr; if (!tlb->need_flush) @@ -141,13 +136,11 @@ ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long e /* lastly, release the freed pages */ nr = tlb->nr; - if (!tlb_fast_mode(tlb)) { - unsigned long i; - tlb->nr = 0; - tlb->start_addr = ~0UL; - for (i = 0; i < nr; ++i) - free_page_and_swap_cache(tlb->pages[i]); - } + + tlb->nr = 0; + tlb->start_addr = ~0UL; + for (i = 0; i < nr; ++i) + free_page_and_swap_cache(tlb->pages[i]); } static inline void __tlb_alloc_page(struct mmu_gather *tlb) @@ -167,20 +160,7 @@ tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_m tlb->mm = mm; tlb->max = ARRAY_SIZE(tlb->local); tlb->pages = tlb->local; - /* - * Use fast mode if only 1 CPU is online. - * - * It would be tempting to turn on fast-mode for full_mm_flush as well. But this - * doesn't work because of speculative accesses and software prefetching: the page - * table of "mm" may (and usually is) the currently active page table and even - * though the kernel won't do any user-space accesses during the TLB shoot down, a - * compiler might use speculation or lfetch.fault on what happens to be a valid - * user-space address. This in turn could trigger a TLB miss fault (or a VHPT - * walk) and re-insert a TLB entry we just removed. Slow mode avoids such - * problems. (We could make fast-mode work by switching the current task to a - * different "mm" during the shootdown.) --davidm 08/02/2002 - */ - tlb->nr = (num_online_cpus() == 1) ? ~0U : 0; + tlb->nr = 0; tlb->fullmm = full_mm_flush; tlb->start_addr = ~0UL; } @@ -214,11 +194,6 @@ static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { tlb->need_flush = 1; - if (tlb_fast_mode(tlb)) { - free_page_and_swap_cache(page); - return 1; /* avoid calling tlb_flush_mmu */ - } - if (!tlb->nr && tlb->pages == tlb->local) __tlb_alloc_page(tlb); diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index b1b1fa6ffffe..13821c339a41 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -97,11 +97,9 @@ struct mmu_gather { unsigned long start; unsigned long end; unsigned int need_flush : 1, /* Did free PTEs */ - fast_mode : 1; /* No batching */ - /* we are in the middle of an operation to clear * a full mm and can make some optimizations */ - unsigned int fullmm : 1, + fullmm : 1, /* we have performed an operation which * requires a complete flush of the tlb */ need_flush_all : 1; @@ -114,19 +112,6 @@ struct mmu_gather { #define HAVE_GENERIC_MMU_GATHER -static inline int tlb_fast_mode(struct mmu_gather *tlb) -{ -#ifdef CONFIG_SMP - return tlb->fast_mode; -#else - /* - * For UP we don't need to worry about TLB flush - * and page free order so much.. - */ - return 1; -#endif -} - void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm); void tlb_flush_mmu(struct mmu_gather *tlb); void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, diff --git a/mm/memory.c b/mm/memory.c index 6dc1882fbd72..61a262b08e53 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -220,7 +220,6 @@ void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm) tlb->start = -1UL; tlb->end = 0; tlb->need_flush = 0; - tlb->fast_mode = (num_possible_cpus() == 1); tlb->local.next = NULL; tlb->local.nr = 0; tlb->local.max = ARRAY_SIZE(tlb->__pages); @@ -244,9 +243,6 @@ void tlb_flush_mmu(struct mmu_gather *tlb) tlb_table_flush(tlb); #endif - if (tlb_fast_mode(tlb)) - return; - for (batch = &tlb->local; batch; batch = batch->next) { free_pages_and_swap_cache(batch->pages, batch->nr); batch->nr = 0; @@ -288,11 +284,6 @@ int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) VM_BUG_ON(!tlb->need_flush); - if (tlb_fast_mode(tlb)) { - free_page_and_swap_cache(page); - return 1; /* avoid calling tlb_flush_mmu() */ - } - batch = tlb->active; batch->pages[batch->nr++] = page; if (batch->nr == batch->max) { From 406b5ee22215554a37760b6fa807da6ad4d52f52 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Tue, 28 May 2013 01:23:22 +0000 Subject: [PATCH 404/429] MIPS: rtlx: Fix implicit declaration of function set_vi_handler() arch/mips/kernel/rtlx.c: In function 'rtlx_module_init': arch/mips/kernel/rtlx.c:523:3: error: implicit declaration of function 'set_vi_handler' [-Werror=implicit-function-declaration] Signed-off-by: Yoichi Yuasa Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5340/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/rtlx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 93c070b41b0d..6fa198db8999 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -40,6 +40,7 @@ #include #include #include +#include static struct rtlx_info *rtlx; static int major; From 38c3c0f6733bec1d1841915a9a82d2c324362686 Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 24 May 2013 16:23:02 +0000 Subject: [PATCH 405/429] MIPS: OCTEON: Improve _machine_halt implementation. As noted by Wladislav Wiebe: $ halt .. Sent SIGKILL to all processes Requesting system halt [66.729373] System halted. [66.733244] [66.734761] ===================================== [66.739473] [ BUG: lock held at task exit time! ] [66.744188] 3.8.7-0-sampleversion-fct #49 Tainted: G O [66.750202] ------------------------------------- [66.754913] init/21479 is exiting with locks still held! [66.760234] 1 lock held by init/21479: [66.763990] #0: (reboot_mutex){+.+...}, at: [] SyS_reboot+0xe0/0x218 [66.772165] [66.772165] stack backtrace: [66.776532] Call Trace: [66.778992] [] dump_stack+0x8/0x34 [66.783972] [] do_exit+0x610/0xa70 [66.788948] [] SyS_reboot+0x1c0/0x218 [66.794186] [] handle_sys64+0x44/0x64 This is an alternative fix to the one sent by Wladislav. We kill the watchdog for each CPU and then spin in WAIT with interrupts disabled. This is the lowest power mode for the OCTEON. If we were to spin with interrupts enabled, we would get a continual stream of warning messages and backtraces from the lockup detector, so I chose to disable interrupts. Signed-off-by: David Daney Cc: Maxim Uvarov Cc: Wladislav Wiebe Cc: linux-mips@linux-mips.org Cc: David Daney Patchwork: https://patchwork.linux-mips.org/patch/5324/ Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/setup.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index b0baa299f899..01b1b3f94feb 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -428,13 +428,16 @@ static void octeon_restart(char *command) */ static void octeon_kill_core(void *arg) { - mb(); - if (octeon_is_simulation()) { - /* The simulator needs the watchdog to stop for dead cores */ - cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0); + if (octeon_is_simulation()) /* A break instruction causes the simulator stop a core */ - asm volatile ("sync\nbreak"); - } + asm volatile ("break" ::: "memory"); + + local_irq_disable(); + /* Disable watchdog on this core. */ + cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0); + /* Spin in a low power mode. */ + while (true) + asm volatile ("wait" ::: "memory"); } From 7b741aa4067b375caa4fce41e292d2f60cf9c98a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 29 May 2013 00:48:10 +0200 Subject: [PATCH 406/429] MIPS: Compat: Fix cputime_to_timeval() arguments in compat binfmt_elf. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit cputime_to_timeval() takes a struct timeval *as its second argument but a struct compat_timeval * will be passed resulting in: CC arch/mips/kernel/binfmt_elfn32.o In file included from arch/mips/kernel/binfmt_elfn32.c:122:0: arch/mips/kernel/../../../fs/binfmt_elf.c: In function ‘fill_prstatus’: arch/mips/kernel/../../../fs/binfmt_elf.c:1330:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfn32.c:55: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfn32.c:122:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1331:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfn32.c:55: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfn32.c:122:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1336:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfn32.c:55: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfn32.c:122:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1337:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfn32.c:55: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfn32.c:122:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1339:2: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfn32.c:55: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfn32.c:122:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1340:2: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfn32.c:55: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ AS arch/mips/kernel/scall64-n32.o CC arch/mips/kernel/signal_n32.o CC arch/mips/kernel/binfmt_elfo32.o In file included from arch/mips/kernel/binfmt_elfo32.c:165:0: arch/mips/kernel/../../../fs/binfmt_elf.c: In function ‘fill_prstatus’: arch/mips/kernel/../../../fs/binfmt_elf.c:1330:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfo32.c:78: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfo32.c:165:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1331:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfo32.c:78: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfo32.c:165:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1336:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfo32.c:78: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfo32.c:165:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1337:3: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfo32.c:78: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfo32.c:165:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1339:2: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfo32.c:78: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ In file included from arch/mips/kernel/binfmt_elfo32.c:165:0: arch/mips/kernel/../../../fs/binfmt_elf.c:1340:2: warning: passing argument 2 of ‘cputime_to_timeval’ from incompatible pointer type [enabled by default] In file included from include/asm-generic/cputime.h:12:0, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/cputime.h:4, from include/linux/sched.h:28, from include/linux/ptrace.h:5, from include/uapi/linux/elfcore.h:7, from include/linux/elfcore.h:7, from arch/mips/kernel/binfmt_elfo32.c:78: include/asm-generic/cputime_nsecs.h:92:91: note: expected ‘struct timeval *’ but argument is of type ‘struct compat_timeval *’ Signed-off-by: Ralf Baechle --- arch/mips/kernel/binfmt_elfn32.c | 11 +++++++++++ arch/mips/kernel/binfmt_elfo32.c | 11 +++++++++++ 2 files changed, 22 insertions(+) diff --git a/arch/mips/kernel/binfmt_elfn32.c b/arch/mips/kernel/binfmt_elfn32.c index e06f777e9c49..1188e00bb120 100644 --- a/arch/mips/kernel/binfmt_elfn32.c +++ b/arch/mips/kernel/binfmt_elfn32.c @@ -119,4 +119,15 @@ MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)"); #undef TASK_SIZE #define TASK_SIZE TASK_SIZE32 +#undef cputime_to_timeval +#define cputime_to_timeval cputime_to_compat_timeval +static __inline__ void +cputime_to_compat_timeval(const cputime_t cputime, struct compat_timeval *value) +{ + unsigned long jiffies = cputime_to_jiffies(cputime); + + value->tv_usec = (jiffies % HZ) * (1000000L / HZ); + value->tv_sec = jiffies / HZ; +} + #include "../../../fs/binfmt_elf.c" diff --git a/arch/mips/kernel/binfmt_elfo32.c b/arch/mips/kernel/binfmt_elfo32.c index 97c5a1668e53..202e581e6096 100644 --- a/arch/mips/kernel/binfmt_elfo32.c +++ b/arch/mips/kernel/binfmt_elfo32.c @@ -162,4 +162,15 @@ MODULE_AUTHOR("Ralf Baechle (ralf@linux-mips.org)"); #undef TASK_SIZE #define TASK_SIZE TASK_SIZE32 +#undef cputime_to_timeval +#define cputime_to_timeval cputime_to_compat_timeval +static __inline__ void +cputime_to_compat_timeval(const cputime_t cputime, struct compat_timeval *value) +{ + unsigned long jiffies = cputime_to_jiffies(cputime); + + value->tv_usec = (jiffies % HZ) * (1000000L / HZ); + value->tv_sec = jiffies / HZ; +} + #include "../../../fs/binfmt_elf.c" From cdfce53986a39daf039b62b69026867734d8430a Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 6 Jun 2013 12:55:53 +0000 Subject: [PATCH 407/429] MIPS: ralink: add missing SZ_1M multiplier On RT5350 the memory size is set to Bytes and not MegaBytes due to a missing multiplier. Signed-off-by: John Crispin Cc: John Crispin Patchwork: https://patchwork.linux-mips.org/patch/5378/ Signed-off-by: Ralf Baechle --- arch/mips/ralink/of.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c index fb1569580def..6b5f3406f414 100644 --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c @@ -88,7 +88,7 @@ void __init plat_mem_setup(void) __dt_setup_arch(&__dtb_start); if (soc_info.mem_size) - add_memory_region(soc_info.mem_base, soc_info.mem_size, + add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M, BOOT_MEM_RAM); else detect_memory_region(soc_info.mem_base, From bb9b8e86ad083ecb2567ae909c1d6cb0bbaa60fe Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 3 Jun 2013 15:28:46 +1000 Subject: [PATCH 408/429] xfs: rework dquot CRCs Calculating dquot CRCs when the backing buffer is written back just doesn't work reliably. There are several places which manipulate dquots directly in the buffers, and they don't calculate CRCs appropriately, nor do they always set the buffer up to calculate CRCs appropriately. Firstly, if we log a dquot buffer (e.g. during allocation) it gets logged without valid CRC, and so on recovery we end up with a dquot that is not valid. Secondly, if we recover/repair a dquot, we don't have a verifier attached to the buffer and hence CRCs are not calculated on the way down to disk. Thirdly, calculating the CRC after we've changed the contents means that if we re-read the dquot from the buffer, we cannot verify the contents of the dquot are valid, as the CRC is invalid. So, to avoid all the dquot CRC errors that are being detected by the read verifier, change to using the same model as for inodes. That is, dquot CRCs are calculated and written to the backing buffer at the time the dquot is flushed to the backing buffer. If we modify the dquot directly in the backing buffer, calculate the CRC immediately after the modification is complete. Hence the dquot in the on-disk buffer should always have a valid CRC. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Reviewed-by: Ben Myers Signed-off-by: Ben Myers (cherry picked from commit 6fcdc59de28817d1fbf1bd58cc01f4f3fac858fb) --- fs/xfs/xfs_dquot.c | 37 ++++++++++++++++--------------------- fs/xfs/xfs_log_recover.c | 10 ++++++++++ fs/xfs/xfs_qm.c | 40 ++++++++++++++++++++++++++++++---------- fs/xfs/xfs_quota.h | 2 ++ 4 files changed, 58 insertions(+), 31 deletions(-) diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c index a41f8bf1da37..044e97a33c8d 100644 --- a/fs/xfs/xfs_dquot.c +++ b/fs/xfs/xfs_dquot.c @@ -249,8 +249,11 @@ xfs_qm_init_dquot_blk( d->dd_diskdq.d_version = XFS_DQUOT_VERSION; d->dd_diskdq.d_id = cpu_to_be32(curid); d->dd_diskdq.d_flags = type; - if (xfs_sb_version_hascrc(&mp->m_sb)) + if (xfs_sb_version_hascrc(&mp->m_sb)) { uuid_copy(&d->dd_uuid, &mp->m_sb.sb_uuid); + xfs_update_cksum((char *)d, sizeof(struct xfs_dqblk), + XFS_DQUOT_CRC_OFF); + } } xfs_trans_dquot_buf(tp, bp, @@ -286,23 +289,6 @@ xfs_dquot_set_prealloc_limits(struct xfs_dquot *dqp) dqp->q_low_space[XFS_QLOWSP_5_PCNT] = space * 5; } -STATIC void -xfs_dquot_buf_calc_crc( - struct xfs_mount *mp, - struct xfs_buf *bp) -{ - struct xfs_dqblk *d = (struct xfs_dqblk *)bp->b_addr; - int i; - - if (!xfs_sb_version_hascrc(&mp->m_sb)) - return; - - for (i = 0; i < mp->m_quotainfo->qi_dqperchunk; i++, d++) { - xfs_update_cksum((char *)d, sizeof(struct xfs_dqblk), - offsetof(struct xfs_dqblk, dd_crc)); - } -} - STATIC bool xfs_dquot_buf_verify_crc( struct xfs_mount *mp, @@ -328,12 +314,11 @@ xfs_dquot_buf_verify_crc( for (i = 0; i < ndquots; i++, d++) { if (!xfs_verify_cksum((char *)d, sizeof(struct xfs_dqblk), - offsetof(struct xfs_dqblk, dd_crc))) + XFS_DQUOT_CRC_OFF)) return false; if (!uuid_equal(&d->dd_uuid, &mp->m_sb.sb_uuid)) return false; } - return true; } @@ -393,6 +378,11 @@ xfs_dquot_buf_read_verify( } } +/* + * we don't calculate the CRC here as that is done when the dquot is flushed to + * the buffer after the update is done. This ensures that the dquot in the + * buffer always has an up-to-date CRC value. + */ void xfs_dquot_buf_write_verify( struct xfs_buf *bp) @@ -404,7 +394,6 @@ xfs_dquot_buf_write_verify( xfs_buf_ioerror(bp, EFSCORRUPTED); return; } - xfs_dquot_buf_calc_crc(mp, bp); } const struct xfs_buf_ops xfs_dquot_buf_ops = { @@ -1151,11 +1140,17 @@ xfs_qm_dqflush( * copy the lsn into the on-disk dquot now while we have the in memory * dquot here. This can't be done later in the write verifier as we * can't get access to the log item at that point in time. + * + * We also calculate the CRC here so that the on-disk dquot in the + * buffer always has a valid CRC. This ensures there is no possibility + * of a dquot without an up-to-date CRC getting to disk. */ if (xfs_sb_version_hascrc(&mp->m_sb)) { struct xfs_dqblk *dqb = (struct xfs_dqblk *)ddqp; dqb->dd_lsn = cpu_to_be64(dqp->q_logitem.qli_item.li_lsn); + xfs_update_cksum((char *)dqb, sizeof(struct xfs_dqblk), + XFS_DQUOT_CRC_OFF); } /* diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index d9e4d3c3991a..d6204d1ac47f 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -2266,6 +2266,12 @@ xfs_qm_dqcheck( d->dd_diskdq.d_flags = type; d->dd_diskdq.d_id = cpu_to_be32(id); + if (xfs_sb_version_hascrc(&mp->m_sb)) { + uuid_copy(&d->dd_uuid, &mp->m_sb.sb_uuid); + xfs_update_cksum((char *)d, sizeof(struct xfs_dqblk), + XFS_DQUOT_CRC_OFF); + } + return errs; } @@ -2793,6 +2799,10 @@ xlog_recover_dquot_pass2( } memcpy(ddq, recddq, item->ri_buf[1].i_len); + if (xfs_sb_version_hascrc(&mp->m_sb)) { + xfs_update_cksum((char *)ddq, sizeof(struct xfs_dqblk), + XFS_DQUOT_CRC_OFF); + } ASSERT(dq_f->qlf_size == 2); ASSERT(bp->b_target->bt_mount == mp); diff --git a/fs/xfs/xfs_qm.c b/fs/xfs/xfs_qm.c index f41702b43003..b75c9bb6e71e 100644 --- a/fs/xfs/xfs_qm.c +++ b/fs/xfs/xfs_qm.c @@ -41,6 +41,7 @@ #include "xfs_qm.h" #include "xfs_trace.h" #include "xfs_icache.h" +#include "xfs_cksum.h" /* * The global quota manager. There is only one of these for the entire @@ -839,7 +840,7 @@ xfs_qm_reset_dqcounts( xfs_dqid_t id, uint type) { - xfs_disk_dquot_t *ddq; + struct xfs_dqblk *dqb; int j; trace_xfs_reset_dqcounts(bp, _RET_IP_); @@ -853,8 +854,12 @@ xfs_qm_reset_dqcounts( do_div(j, sizeof(xfs_dqblk_t)); ASSERT(mp->m_quotainfo->qi_dqperchunk == j); #endif - ddq = bp->b_addr; + dqb = bp->b_addr; for (j = 0; j < mp->m_quotainfo->qi_dqperchunk; j++) { + struct xfs_disk_dquot *ddq; + + ddq = (struct xfs_disk_dquot *)&dqb[j]; + /* * Do a sanity check, and if needed, repair the dqblk. Don't * output any warnings because it's perfectly possible to @@ -871,7 +876,12 @@ xfs_qm_reset_dqcounts( ddq->d_bwarns = 0; ddq->d_iwarns = 0; ddq->d_rtbwarns = 0; - ddq = (xfs_disk_dquot_t *) ((xfs_dqblk_t *)ddq + 1); + + if (xfs_sb_version_hascrc(&mp->m_sb)) { + xfs_update_cksum((char *)&dqb[j], + sizeof(struct xfs_dqblk), + XFS_DQUOT_CRC_OFF); + } } } @@ -907,19 +917,29 @@ xfs_qm_dqiter_bufs( XFS_FSB_TO_DADDR(mp, bno), mp->m_quotainfo->qi_dqchunklen, 0, &bp, &xfs_dquot_buf_ops); + + /* + * CRC and validation errors will return a EFSCORRUPTED here. If + * this occurs, re-read without CRC validation so that we can + * repair the damage via xfs_qm_reset_dqcounts(). This process + * will leave a trace in the log indicating corruption has + * been detected. + */ + if (error == EFSCORRUPTED) { + error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp, + XFS_FSB_TO_DADDR(mp, bno), + mp->m_quotainfo->qi_dqchunklen, 0, &bp, + NULL); + } + if (error) break; - /* - * XXX(hch): need to figure out if it makes sense to validate - * the CRC here. - */ xfs_qm_reset_dqcounts(mp, bp, firstid, type); xfs_buf_delwri_queue(bp, buffer_list); xfs_buf_relse(bp); - /* - * goto the next block. - */ + + /* goto the next block. */ bno++; firstid += mp->m_quotainfo->qi_dqperchunk; } diff --git a/fs/xfs/xfs_quota.h b/fs/xfs/xfs_quota.h index c61e31c7d997..c38068f26c55 100644 --- a/fs/xfs/xfs_quota.h +++ b/fs/xfs/xfs_quota.h @@ -87,6 +87,8 @@ typedef struct xfs_dqblk { uuid_t dd_uuid; /* location information */ } xfs_dqblk_t; +#define XFS_DQUOT_CRC_OFF offsetof(struct xfs_dqblk, dd_crc) + /* * flags for q_flags field in the dquot. */ From ea929536a43226a01d1a73ac8b14d52e81163bd4 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 3 Jun 2013 15:28:49 +1000 Subject: [PATCH 409/429] xfs: fix remote attribute invalidation for a leaf When invalidating an attribute leaf block block, there might be remote attributes that it points to. With the recent rework of the remote attribute format, we have to make sure we calculate the length of the attribute correctly. We aren't doing that in xfs_attr3_leaf_inactive(), so fix it. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Reviewed-by: Mark Tinguely Signed-off-by: Ben Myers (cherry picked from commit 59913f14dfe8eb772ff93eb442947451b4416329) --- fs/xfs/xfs_attr_leaf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index d788302e506a..31d3cd129269 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -3258,7 +3258,7 @@ xfs_attr3_leaf_inactive( name_rmt = xfs_attr3_leaf_name_remote(leaf, i); if (name_rmt->valueblk) { lp->valueblk = be32_to_cpu(name_rmt->valueblk); - lp->valuelen = XFS_B_TO_FSB(dp->i_mount, + lp->valuelen = xfs_attr3_rmt_blocks(dp->i_mount, be32_to_cpu(name_rmt->valuelen)); lp++; } From 75406170751b4de88a01f73dda56efa617ddd5d7 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Wed, 5 Jun 2013 12:09:07 +1000 Subject: [PATCH 410/429] xfs: fix log recovery transaction item reordering There are several constraints that inode allocation and unlink logging impose on log recovery. These all stem from the fact that inode alloc/unlink are logged in buffers, but all other inode changes are logged in inode items. Hence there are ordering constraints that recovery must follow to ensure the correct result occurs. As it turns out, this ordering has been working mostly by chance than good management. The existing code moves all buffers except cancelled buffers to the head of the list, and everything else to the tail of the list. The problem with this is that is interleaves inode items with the buffer cancellation items, and hence whether the inode item in an cancelled buffer gets replayed is essentially left to chance. Further, this ordering causes problems for log recovery when inode CRCs are enabled. It typically replays the inode unlink buffer long before it replays the inode core changes, and so the CRC recorded in an unlink buffer is going to be invalid and hence any attempt to validate the inode in the buffer is going to fail. Hence we really need to enforce the ordering that the inode alloc/unlink code has expected log recovery to have since inode chunk de-allocation was introduced back in 2003... Signed-off-by: Dave Chinner Reviewed-by: Mark Tinguely Signed-off-by: Ben Myers (cherry picked from commit a775ad778073d55744ed6709ccede36310638911) --- fs/xfs/xfs_log_recover.c | 65 +++++++++++++++++++++++++++++++++++----- 1 file changed, 58 insertions(+), 7 deletions(-) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index d6204d1ac47f..83088d96e6c4 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1599,10 +1599,43 @@ xlog_recover_add_to_trans( } /* - * Sort the log items in the transaction. Cancelled buffers need - * to be put first so they are processed before any items that might - * modify the buffers. If they are cancelled, then the modifications - * don't need to be replayed. + * Sort the log items in the transaction. + * + * The ordering constraints are defined by the inode allocation and unlink + * behaviour. The rules are: + * + * 1. Every item is only logged once in a given transaction. Hence it + * represents the last logged state of the item. Hence ordering is + * dependent on the order in which operations need to be performed so + * required initial conditions are always met. + * + * 2. Cancelled buffers are recorded in pass 1 in a separate table and + * there's nothing to replay from them so we can simply cull them + * from the transaction. However, we can't do that until after we've + * replayed all the other items because they may be dependent on the + * cancelled buffer and replaying the cancelled buffer can remove it + * form the cancelled buffer table. Hence they have tobe done last. + * + * 3. Inode allocation buffers must be replayed before inode items that + * read the buffer and replay changes into it. + * + * 4. Inode unlink buffers must be replayed after inode items are replayed. + * This ensures that inodes are completely flushed to the inode buffer + * in a "free" state before we remove the unlinked inode list pointer. + * + * Hence the ordering needs to be inode allocation buffers first, inode items + * second, inode unlink buffers third and cancelled buffers last. + * + * But there's a problem with that - we can't tell an inode allocation buffer + * apart from a regular buffer, so we can't separate them. We can, however, + * tell an inode unlink buffer from the others, and so we can separate them out + * from all the other buffers and move them to last. + * + * Hence, 4 lists, in order from head to tail: + * - buffer_list for all buffers except cancelled/inode unlink buffers + * - item_list for all non-buffer items + * - inode_buffer_list for inode unlink buffers + * - cancel_list for the cancelled buffers */ STATIC int xlog_recover_reorder_trans( @@ -1612,6 +1645,10 @@ xlog_recover_reorder_trans( { xlog_recover_item_t *item, *n; LIST_HEAD(sort_list); + LIST_HEAD(cancel_list); + LIST_HEAD(buffer_list); + LIST_HEAD(inode_buffer_list); + LIST_HEAD(inode_list); list_splice_init(&trans->r_itemq, &sort_list); list_for_each_entry_safe(item, n, &sort_list, ri_list) { @@ -1619,12 +1656,18 @@ xlog_recover_reorder_trans( switch (ITEM_TYPE(item)) { case XFS_LI_BUF: - if (!(buf_f->blf_flags & XFS_BLF_CANCEL)) { + if (buf_f->blf_flags & XFS_BLF_CANCEL) { trace_xfs_log_recover_item_reorder_head(log, trans, item, pass); - list_move(&item->ri_list, &trans->r_itemq); + list_move(&item->ri_list, &cancel_list); break; } + if (buf_f->blf_flags & XFS_BLF_INODE_BUF) { + list_move(&item->ri_list, &inode_buffer_list); + break; + } + list_move_tail(&item->ri_list, &buffer_list); + break; case XFS_LI_INODE: case XFS_LI_DQUOT: case XFS_LI_QUOTAOFF: @@ -1632,7 +1675,7 @@ xlog_recover_reorder_trans( case XFS_LI_EFI: trace_xfs_log_recover_item_reorder_tail(log, trans, item, pass); - list_move_tail(&item->ri_list, &trans->r_itemq); + list_move_tail(&item->ri_list, &inode_list); break; default: xfs_warn(log->l_mp, @@ -1643,6 +1686,14 @@ xlog_recover_reorder_trans( } } ASSERT(list_empty(&sort_list)); + if (!list_empty(&buffer_list)) + list_splice(&buffer_list, &trans->r_itemq); + if (!list_empty(&inode_list)) + list_splice_tail(&inode_list, &trans->r_itemq); + if (!list_empty(&inode_buffer_list)) + list_splice_tail(&inode_buffer_list, &trans->r_itemq); + if (!list_empty(&cancel_list)) + list_splice_tail(&cancel_list, &trans->r_itemq); return 0; } From ad868afddb908a5d4015c6b7637721b48fb9c8f9 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Wed, 5 Jun 2013 12:09:08 +1000 Subject: [PATCH 411/429] xfs: inode unlinked list needs to recalculate the inode CRC The inode unlinked list manipulations operate directly on the inode buffer, and so bypass the inode CRC calculation mechanisms. Hence an inode on the unlinked list has an invalid CRC. Fix this by recalculating the CRC whenever we modify an unlinked list pointer in an inode, ncluding during log recovery. This is trivial to do and results in unlinked list operations always leaving a consistent inode in the buffer. Signed-off-by: Dave Chinner Reviewed-by: Mark Tinguely Signed-off-by: Ben Myers (cherry picked from commit 0a32c26e720a8b38971d0685976f4a7d63f9e2ef) --- fs/xfs/xfs_inode.c | 16 ++++++++++++++++ fs/xfs/xfs_log_recover.c | 9 +++++++++ 2 files changed, 25 insertions(+) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index efbe1accb6ca..7f7be5f98f52 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1638,6 +1638,10 @@ xfs_iunlink( dip->di_next_unlinked = agi->agi_unlinked[bucket_index]; offset = ip->i_imap.im_boffset + offsetof(xfs_dinode_t, di_next_unlinked); + + /* need to recalc the inode CRC if appropriate */ + xfs_dinode_calc_crc(mp, dip); + xfs_trans_inode_buf(tp, ibp); xfs_trans_log_buf(tp, ibp, offset, (offset + sizeof(xfs_agino_t) - 1)); @@ -1723,6 +1727,10 @@ xfs_iunlink_remove( dip->di_next_unlinked = cpu_to_be32(NULLAGINO); offset = ip->i_imap.im_boffset + offsetof(xfs_dinode_t, di_next_unlinked); + + /* need to recalc the inode CRC if appropriate */ + xfs_dinode_calc_crc(mp, dip); + xfs_trans_inode_buf(tp, ibp); xfs_trans_log_buf(tp, ibp, offset, (offset + sizeof(xfs_agino_t) - 1)); @@ -1796,6 +1804,10 @@ xfs_iunlink_remove( dip->di_next_unlinked = cpu_to_be32(NULLAGINO); offset = ip->i_imap.im_boffset + offsetof(xfs_dinode_t, di_next_unlinked); + + /* need to recalc the inode CRC if appropriate */ + xfs_dinode_calc_crc(mp, dip); + xfs_trans_inode_buf(tp, ibp); xfs_trans_log_buf(tp, ibp, offset, (offset + sizeof(xfs_agino_t) - 1)); @@ -1809,6 +1821,10 @@ xfs_iunlink_remove( last_dip->di_next_unlinked = cpu_to_be32(next_agino); ASSERT(next_agino != 0); offset = last_offset + offsetof(xfs_dinode_t, di_next_unlinked); + + /* need to recalc the inode CRC if appropriate */ + xfs_dinode_calc_crc(mp, last_dip); + xfs_trans_inode_buf(tp, last_ibp); xfs_trans_log_buf(tp, last_ibp, offset, (offset + sizeof(xfs_agino_t) - 1)); diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 83088d96e6c4..45a85ff84da1 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1912,6 +1912,15 @@ xlog_recover_do_inode_buffer( buffer_nextp = (xfs_agino_t *)xfs_buf_offset(bp, next_unlinked_offset); *buffer_nextp = *logged_nextp; + + /* + * If necessary, recalculate the CRC in the on-disk inode. We + * have to leave the inode in a consistent state for whoever + * reads it next.... + */ + xfs_dinode_calc_crc(mp, (struct xfs_dinode *) + xfs_buf_offset(bp, i * mp->m_sb.sb_inodesize)); + } return 0; From f763fd440e094be37b38596ee14f1d64caa9bf9c Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Wed, 5 Jun 2013 12:09:09 +1000 Subject: [PATCH 412/429] xfs: disable noattr2/attr2 mount options for CRC enabled filesystems attr2 format is always enabled for v5 superblock filesystems, so the mount options to enable or disable it need to be cause mount errors. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Ben Myers (cherry picked from commit d3eaace84e40bf946129e516dcbd617173c1cf14) --- Documentation/filesystems/xfs.txt | 3 +++ fs/xfs/xfs_super.c | 11 +++++++++++ 2 files changed, 14 insertions(+) diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt index 3e4b3dd1e046..83577f0232a0 100644 --- a/Documentation/filesystems/xfs.txt +++ b/Documentation/filesystems/xfs.txt @@ -33,6 +33,9 @@ When mounting an XFS filesystem, the following options are accepted. removing extended attributes) the on-disk superblock feature bit field will be updated to reflect this format being in use. + CRC enabled filesystems always use the attr2 format, and so + will reject the noattr2 mount option if it is set. + barrier Enables the use of block layer write barriers for writes into the journal and unwritten extent conversion. This allows for diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c index ea341cea68cb..3033ba5e9762 100644 --- a/fs/xfs/xfs_super.c +++ b/fs/xfs/xfs_super.c @@ -1372,6 +1372,17 @@ xfs_finish_flags( } } + /* + * V5 filesystems always use attr2 format for attributes. + */ + if (xfs_sb_version_hascrc(&mp->m_sb) && + (mp->m_flags & XFS_MOUNT_NOATTR2)) { + xfs_warn(mp, +"Cannot mount a V5 filesystem as %s. %s is always enabled for V5 filesystems.", + MNTOPT_NOATTR2, MNTOPT_ATTR2); + return XFS_ERROR(EINVAL); + } + /* * mkfs'ed attr2 will turn on attr2 mount unless explicitly * told by noattr2 to turn it off From 0a8aa1939777dd114479677f0044652c1fd72398 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Wed, 5 Jun 2013 12:09:10 +1000 Subject: [PATCH 413/429] xfs: increase number of ACL entries for V5 superblocks The limit of 25 ACL entries is arbitrary, but baked into the on-disk format. For version 5 superblocks, increase it to the maximum nuber of ACLs that can fit into a single xattr. Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Reviewed-by: Mark Tinguely Signed-off-by: Ben Myers (cherry picked from commit 5c87d4bc1a86bd6e6754ac3d6e111d776ddcfe57) --- fs/xfs/xfs_acl.c | 31 ++++++++++++++++++------------- fs/xfs/xfs_acl.h | 33 +++++++++++++++++++++++++-------- 2 files changed, 43 insertions(+), 21 deletions(-) diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c index 1d32f1d52763..306d883d89bc 100644 --- a/fs/xfs/xfs_acl.c +++ b/fs/xfs/xfs_acl.c @@ -21,6 +21,8 @@ #include "xfs_bmap_btree.h" #include "xfs_inode.h" #include "xfs_vnodeops.h" +#include "xfs_sb.h" +#include "xfs_mount.h" #include "xfs_trace.h" #include #include @@ -34,7 +36,9 @@ */ STATIC struct posix_acl * -xfs_acl_from_disk(struct xfs_acl *aclp) +xfs_acl_from_disk( + struct xfs_acl *aclp, + int max_entries) { struct posix_acl_entry *acl_e; struct posix_acl *acl; @@ -42,7 +46,7 @@ xfs_acl_from_disk(struct xfs_acl *aclp) unsigned int count, i; count = be32_to_cpu(aclp->acl_cnt); - if (count > XFS_ACL_MAX_ENTRIES) + if (count > max_entries) return ERR_PTR(-EFSCORRUPTED); acl = posix_acl_alloc(count, GFP_KERNEL); @@ -108,9 +112,9 @@ xfs_get_acl(struct inode *inode, int type) struct xfs_inode *ip = XFS_I(inode); struct posix_acl *acl; struct xfs_acl *xfs_acl; - int len = sizeof(struct xfs_acl); unsigned char *ea_name; int error; + int len; acl = get_cached_acl(inode, type); if (acl != ACL_NOT_CACHED) @@ -133,8 +137,8 @@ xfs_get_acl(struct inode *inode, int type) * If we have a cached ACLs value just return it, not need to * go out to the disk. */ - - xfs_acl = kzalloc(sizeof(struct xfs_acl), GFP_KERNEL); + len = XFS_ACL_MAX_SIZE(ip->i_mount); + xfs_acl = kzalloc(len, GFP_KERNEL); if (!xfs_acl) return ERR_PTR(-ENOMEM); @@ -153,7 +157,7 @@ xfs_get_acl(struct inode *inode, int type) goto out; } - acl = xfs_acl_from_disk(xfs_acl); + acl = xfs_acl_from_disk(xfs_acl, XFS_ACL_MAX_ENTRIES(ip->i_mount)); if (IS_ERR(acl)) goto out; @@ -189,16 +193,17 @@ xfs_set_acl(struct inode *inode, int type, struct posix_acl *acl) if (acl) { struct xfs_acl *xfs_acl; - int len; + int len = XFS_ACL_MAX_SIZE(ip->i_mount); - xfs_acl = kzalloc(sizeof(struct xfs_acl), GFP_KERNEL); + xfs_acl = kzalloc(len, GFP_KERNEL); if (!xfs_acl) return -ENOMEM; xfs_acl_to_disk(xfs_acl, acl); - len = sizeof(struct xfs_acl) - - (sizeof(struct xfs_acl_entry) * - (XFS_ACL_MAX_ENTRIES - acl->a_count)); + + /* subtract away the unused acl entries */ + len -= sizeof(struct xfs_acl_entry) * + (XFS_ACL_MAX_ENTRIES(ip->i_mount) - acl->a_count); error = -xfs_attr_set(ip, ea_name, (unsigned char *)xfs_acl, len, ATTR_ROOT); @@ -243,7 +248,7 @@ xfs_set_mode(struct inode *inode, umode_t mode) static int xfs_acl_exists(struct inode *inode, unsigned char *name) { - int len = sizeof(struct xfs_acl); + int len = XFS_ACL_MAX_SIZE(XFS_M(inode->i_sb)); return (xfs_attr_get(XFS_I(inode), name, NULL, &len, ATTR_ROOT|ATTR_KERNOVAL) == 0); @@ -379,7 +384,7 @@ xfs_xattr_acl_set(struct dentry *dentry, const char *name, goto out_release; error = -EINVAL; - if (acl->a_count > XFS_ACL_MAX_ENTRIES) + if (acl->a_count > XFS_ACL_MAX_ENTRIES(XFS_M(inode->i_sb))) goto out_release; if (type == ACL_TYPE_ACCESS) { diff --git a/fs/xfs/xfs_acl.h b/fs/xfs/xfs_acl.h index 39632d941354..4016a567b83c 100644 --- a/fs/xfs/xfs_acl.h +++ b/fs/xfs/xfs_acl.h @@ -22,19 +22,36 @@ struct inode; struct posix_acl; struct xfs_inode; -#define XFS_ACL_MAX_ENTRIES 25 #define XFS_ACL_NOT_PRESENT (-1) /* On-disk XFS access control list structure */ -struct xfs_acl { - __be32 acl_cnt; - struct xfs_acl_entry { - __be32 ae_tag; - __be32 ae_id; - __be16 ae_perm; - } acl_entry[XFS_ACL_MAX_ENTRIES]; +struct xfs_acl_entry { + __be32 ae_tag; + __be32 ae_id; + __be16 ae_perm; + __be16 ae_pad; /* fill the implicit hole in the structure */ }; +struct xfs_acl { + __be32 acl_cnt; + struct xfs_acl_entry acl_entry[0]; +}; + +/* + * The number of ACL entries allowed is defined by the on-disk format. + * For v4 superblocks, that is limited to 25 entries. For v5 superblocks, it is + * limited only by the maximum size of the xattr that stores the information. + */ +#define XFS_ACL_MAX_ENTRIES(mp) \ + (xfs_sb_version_hascrc(&mp->m_sb) \ + ? (XATTR_SIZE_MAX - sizeof(struct xfs_acl)) / \ + sizeof(struct xfs_acl_entry) \ + : 25) + +#define XFS_ACL_MAX_SIZE(mp) \ + (sizeof(struct xfs_acl) + \ + sizeof(struct xfs_acl_entry) * XFS_ACL_MAX_ENTRIES((mp))) + /* On-disk XFS extended attribute names */ #define SGI_ACL_FILE (unsigned char *)"SGI_ACL_FILE" #define SGI_ACL_DEFAULT (unsigned char *)"SGI_ACL_DEFAULT" From 9eecf22d2b375b9064a20421c6c307b760b03d46 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 6 Jun 2013 13:32:47 +0200 Subject: [PATCH 414/429] USB: whiteheat: fix broken port configuration When configuring the port (e.g. set_termios) the port minor number rather than the port number was used in the request (and they only coincide for minor number 0). Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/whiteheat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index b9fca3586d74..347caad47a12 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -649,7 +649,7 @@ static void firm_setup_port(struct tty_struct *tty) struct whiteheat_port_settings port_settings; unsigned int cflag = tty->termios.c_cflag; - port_settings.port = port->number + 1; + port_settings.port = port->number - port->serial->minor + 1; /* get the byte size */ switch (cflag & CSIZE) { From b8a24e6281d37243c06b9497dcbfaa98c1e2ad35 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Thu, 6 Jun 2013 12:57:24 +0200 Subject: [PATCH 415/429] USB: option: blacklist network interface on Huawei E1820 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The mode used by Windows for the Huawei E1820 will use the same ff/ff/ff class codes for both serial and network functions. Reported-by: Graham Inggs Signed-off-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 93d02bc4eb52..66314c3b6d1a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -593,6 +593,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff), /* Huawei E1820 */ + .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) }, From 73228a0538a70ebc4547bd09dee8971360dc1d87 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 5 Jun 2013 15:26:27 -0500 Subject: [PATCH 416/429] USB: option,zte_ev: move most ZTE CDMA devices to zte_ev Per some ZTE Linux drivers I found for the AC2716, the following patch moves most ZTE CDMA devices from option to zte_ev. The blacklist stuff that option does is not required with zte_ev, because it doesn't implement any of the send_setup hooks which the blacklist suppressed. I did not move the 2718 over because I could not find any ZTE Linux drivers for that device, nor even any Windows drivers. Signed-off-by: Dan Williams Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 24 +----------------------- drivers/usb/serial/zte_ev.c | 24 +++++++++++++++++++++--- 2 files changed, 22 insertions(+), 26 deletions(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 66314c3b6d1a..bd4323ddae1a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -250,13 +250,7 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_MF622 0x0001 #define ZTE_PRODUCT_MF628 0x0015 #define ZTE_PRODUCT_MF626 0x0031 -#define ZTE_PRODUCT_CDMA_TECH 0xfffe -#define ZTE_PRODUCT_AC8710 0xfff1 -#define ZTE_PRODUCT_AC2726 0xfff5 -#define ZTE_PRODUCT_AC8710T 0xffff #define ZTE_PRODUCT_MC2718 0xffe8 -#define ZTE_PRODUCT_AD3812 0xffeb -#define ZTE_PRODUCT_MC2716 0xffed #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -495,18 +489,10 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = { .reserved = BIT(4), }; -static const struct option_blacklist_info zte_ad3812_z_blacklist = { - .sendsetup = BIT(0) | BIT(1) | BIT(2), -}; - static const struct option_blacklist_info zte_mc2718_z_blacklist = { .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4), }; -static const struct option_blacklist_info zte_mc2716_z_blacklist = { - .sendsetup = BIT(1) | BIT(2) | BIT(3), -}; - static const struct option_blacklist_info huawei_cdc12_blacklist = { .reserved = BIT(1) | BIT(2), }; @@ -799,7 +785,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, - { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */ @@ -1201,16 +1186,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, + /* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) }, diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c index 870e01e24481..fca4c752a4ed 100644 --- a/drivers/usb/serial/zte_ev.c +++ b/drivers/usb/serial/zte_ev.c @@ -273,11 +273,29 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) } static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x19d2, 0xffff) }, /* AC8700 */ - { USB_DEVICE(0x19d2, 0xfffe) }, - { USB_DEVICE(0x19d2, 0xfffd) }, /* MG880 */ + /* AC8710, AC8710T */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) }, + /* AC8700 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) }, + /* MG880 */ + { USB_DEVICE(0x19d2, 0xfffd) }, + { USB_DEVICE(0x19d2, 0xfffc) }, + { USB_DEVICE(0x19d2, 0xfffb) }, + /* AC2726, AC8710_V3 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfff1, 0xff, 0xff, 0xff) }, + { USB_DEVICE(0x19d2, 0xfff6) }, + { USB_DEVICE(0x19d2, 0xfff7) }, + { USB_DEVICE(0x19d2, 0xfff8) }, + { USB_DEVICE(0x19d2, 0xfff9) }, + { USB_DEVICE(0x19d2, 0xffee) }, + /* AC2716, MC2716 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) }, + /* AD3812 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) }, + { USB_DEVICE(0x19d2, 0xffec) }, { USB_DEVICE(0x05C6, 0x3197) }, { USB_DEVICE(0x05C6, 0x6000) }, + { USB_DEVICE(0x05C6, 0x9008) }, { }, }; MODULE_DEVICE_TABLE(usb, id_table); From f17a5194859a82afe4164e938b92035b86c55794 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Thu, 30 May 2013 21:10:37 -0400 Subject: [PATCH 417/429] tracing: Use current_uid() for critical time tracing The irqsoff tracer records the max time that interrupts are disabled. There are hooks in the assembly code that calls back into the tracer when interrupts are disabled or enabled. When they are enabled, the tracer checks if the amount of time they were disabled is larger than the previous recorded max interrupts off time. If it is, it creates a snapshot of the currently running trace to store where the last largest interrupts off time was held and how it happened. During testing, this RCU lockdep dump appeared: [ 1257.829021] =============================== [ 1257.829021] [ INFO: suspicious RCU usage. ] [ 1257.829021] 3.10.0-rc1-test+ #171 Tainted: G W [ 1257.829021] ------------------------------- [ 1257.829021] /home/rostedt/work/git/linux-trace.git/include/linux/rcupdate.h:780 rcu_read_lock() used illegally while idle! [ 1257.829021] [ 1257.829021] other info that might help us debug this: [ 1257.829021] [ 1257.829021] [ 1257.829021] RCU used illegally from idle CPU! [ 1257.829021] rcu_scheduler_active = 1, debug_locks = 0 [ 1257.829021] RCU used illegally from extended quiescent state! [ 1257.829021] 2 locks held by trace-cmd/4831: [ 1257.829021] #0: (max_trace_lock){......}, at: [] stop_critical_timing+0x1a3/0x209 [ 1257.829021] #1: (rcu_read_lock){.+.+..}, at: [] __update_max_tr+0x88/0x1ee [ 1257.829021] [ 1257.829021] stack backtrace: [ 1257.829021] CPU: 3 PID: 4831 Comm: trace-cmd Tainted: G W 3.10.0-rc1-test+ #171 [ 1257.829021] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 [ 1257.829021] 0000000000000001 ffff880065f49da8 ffffffff8153dd2b ffff880065f49dd8 [ 1257.829021] ffffffff81092a00 ffff88006bd78680 ffff88007add7500 0000000000000003 [ 1257.829021] ffff88006bd78680 ffff880065f49e18 ffffffff810daebf ffffffff810dae5a [ 1257.829021] Call Trace: [ 1257.829021] [] dump_stack+0x19/0x1b [ 1257.829021] [] lockdep_rcu_suspicious+0x109/0x112 [ 1257.829021] [] __update_max_tr+0xed/0x1ee [ 1257.829021] [] ? __update_max_tr+0x88/0x1ee [ 1257.829021] [] ? user_enter+0xfd/0x107 [ 1257.829021] [] update_max_tr_single+0x11d/0x12d [ 1257.829021] [] ? user_enter+0xfd/0x107 [ 1257.829021] [] stop_critical_timing+0x141/0x209 [ 1257.829021] [] ? trace_hardirqs_on+0xd/0xf [ 1257.829021] [] ? user_enter+0xfd/0x107 [ 1257.829021] [] time_hardirqs_on+0x2a/0x2f [ 1257.829021] [] ? user_enter+0xfd/0x107 [ 1257.829021] [] trace_hardirqs_on_caller+0x16/0x197 [ 1257.829021] [] trace_hardirqs_on+0xd/0xf [ 1257.829021] [] user_enter+0xfd/0x107 [ 1257.829021] [] do_notify_resume+0x92/0x97 [ 1257.829021] [] int_signal+0x12/0x17 What happened was entering into the user code, the interrupts were enabled and a max interrupts off was recorded. The trace buffer was saved along with various information about the task: comm, pid, uid, priority, etc. The uid is recorded with task_uid(tsk). But this is a macro that uses rcu_read_lock() to retrieve the data, and this happened to happen where RCU is blind (user_enter). As only the preempt and irqs off tracers can have this happen, and they both only have the tsk == current, if tsk == current, use current_uid() instead of task_uid(), as current_uid() does not use RCU as only current can change its uid. This fixes the RCU suspicious splat. Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 4d79485b3237..1a41023a1f88 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -843,7 +843,15 @@ __update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) memcpy(max_data->comm, tsk->comm, TASK_COMM_LEN); max_data->pid = tsk->pid; - max_data->uid = task_uid(tsk); + /* + * If tsk == current, then use current_uid(), as that does not use + * RCU. The irq tracer can be called out of RCU scope. + */ + if (tsk == current) + max_data->uid = current_uid(); + else + max_data->uid = task_uid(tsk); + max_data->nice = tsk->static_prio - 20 - MAX_RT_PRIO; max_data->policy = tsk->policy; max_data->rt_priority = tsk->rt_priority; From a7526eb5d06b0084ef12d7b168d008fcf516caab Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Wed, 5 Jun 2013 19:38:26 +0000 Subject: [PATCH 418/429] net: Unbreak compat_sys_{send,recv}msg I broke them in this commit: commit 1be374a0518a288147c6a7398792583200a67261 Author: Andy Lutomirski Date: Wed May 22 14:07:44 2013 -0700 net: Block MSG_CMSG_COMPAT in send(m)msg and recv(m)msg This patch adds __sys_sendmsg and __sys_sendmsg as common helpers that accept MSG_CMSG_COMPAT and blocks MSG_CMSG_COMPAT at the syscall entrypoints. It also reverts some unnecessary checks in sys_socketcall. Apparently I was suffering from underscore blindness the first time around. Signed-off-by: Andy Lutomirski Tested-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/socket.h | 3 ++ net/compat.c | 13 ++++++-- net/socket.c | 72 +++++++++++++++++++----------------------- 3 files changed, 47 insertions(+), 41 deletions(-) diff --git a/include/linux/socket.h b/include/linux/socket.h index 33bf2dfab19d..b10ce4b341ea 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -320,6 +320,9 @@ extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data); struct timespec; +/* The __sys_...msg variants allow MSG_CMSG_COMPAT */ +extern long __sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags); +extern long __sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags); extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, unsigned int flags, struct timespec *timeout); extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, diff --git a/net/compat.c b/net/compat.c index 79ae88485001..f0a1ba6c8086 100644 --- a/net/compat.c +++ b/net/compat.c @@ -734,19 +734,25 @@ static unsigned char nas[21] = { asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags) { - return sys_sendmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_sendmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); } asmlinkage long compat_sys_sendmmsg(int fd, struct compat_mmsghdr __user *mmsg, unsigned int vlen, unsigned int flags) { + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; return __sys_sendmmsg(fd, (struct mmsghdr __user *)mmsg, vlen, flags | MSG_CMSG_COMPAT); } asmlinkage long compat_sys_recvmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags) { - return sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); } asmlinkage long compat_sys_recv(int fd, void __user *buf, size_t len, unsigned int flags) @@ -768,6 +774,9 @@ asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg, int datagrams; struct timespec ktspec; + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + if (COMPAT_USE_64BIT_TIME) return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen, flags | MSG_CMSG_COMPAT, diff --git a/net/socket.c b/net/socket.c index 9ff6366fee13..4ca1526db756 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1956,7 +1956,7 @@ struct used_address { unsigned int name_len; }; -static int __sys_sendmsg(struct socket *sock, struct msghdr __user *msg, +static int ___sys_sendmsg(struct socket *sock, struct msghdr __user *msg, struct msghdr *msg_sys, unsigned int flags, struct used_address *used_address) { @@ -2071,26 +2071,30 @@ out: * BSD sendmsg interface */ -SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned int, flags) +long __sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags) { int fput_needed, err; struct msghdr msg_sys; struct socket *sock; - if (flags & MSG_CMSG_COMPAT) - return -EINVAL; - sock = sockfd_lookup_light(fd, &err, &fput_needed); if (!sock) goto out; - err = __sys_sendmsg(sock, msg, &msg_sys, flags, NULL); + err = ___sys_sendmsg(sock, msg, &msg_sys, flags, NULL); fput_light(sock->file, fput_needed); out: return err; } +SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned int, flags) +{ + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_sendmsg(fd, msg, flags); +} + /* * Linux sendmmsg interface */ @@ -2121,15 +2125,16 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, while (datagrams < vlen) { if (MSG_CMSG_COMPAT & flags) { - err = __sys_sendmsg(sock, (struct msghdr __user *)compat_entry, - &msg_sys, flags, &used_address); + err = ___sys_sendmsg(sock, (struct msghdr __user *)compat_entry, + &msg_sys, flags, &used_address); if (err < 0) break; err = __put_user(err, &compat_entry->msg_len); ++compat_entry; } else { - err = __sys_sendmsg(sock, (struct msghdr __user *)entry, - &msg_sys, flags, &used_address); + err = ___sys_sendmsg(sock, + (struct msghdr __user *)entry, + &msg_sys, flags, &used_address); if (err < 0) break; err = put_user(err, &entry->msg_len); @@ -2158,7 +2163,7 @@ SYSCALL_DEFINE4(sendmmsg, int, fd, struct mmsghdr __user *, mmsg, return __sys_sendmmsg(fd, mmsg, vlen, flags); } -static int __sys_recvmsg(struct socket *sock, struct msghdr __user *msg, +static int ___sys_recvmsg(struct socket *sock, struct msghdr __user *msg, struct msghdr *msg_sys, unsigned int flags, int nosec) { struct compat_msghdr __user *msg_compat = @@ -2250,27 +2255,31 @@ out: * BSD recvmsg interface */ -SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg, - unsigned int, flags) +long __sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags) { int fput_needed, err; struct msghdr msg_sys; struct socket *sock; - if (flags & MSG_CMSG_COMPAT) - return -EINVAL; - sock = sockfd_lookup_light(fd, &err, &fput_needed); if (!sock) goto out; - err = __sys_recvmsg(sock, msg, &msg_sys, flags, 0); + err = ___sys_recvmsg(sock, msg, &msg_sys, flags, 0); fput_light(sock->file, fput_needed); out: return err; } +SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg, + unsigned int, flags) +{ + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_recvmsg(fd, msg, flags); +} + /* * Linux recvmmsg interface */ @@ -2308,17 +2317,18 @@ int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, * No need to ask LSM for more than the first datagram. */ if (MSG_CMSG_COMPAT & flags) { - err = __sys_recvmsg(sock, (struct msghdr __user *)compat_entry, - &msg_sys, flags & ~MSG_WAITFORONE, - datagrams); + err = ___sys_recvmsg(sock, (struct msghdr __user *)compat_entry, + &msg_sys, flags & ~MSG_WAITFORONE, + datagrams); if (err < 0) break; err = __put_user(err, &compat_entry->msg_len); ++compat_entry; } else { - err = __sys_recvmsg(sock, (struct msghdr __user *)entry, - &msg_sys, flags & ~MSG_WAITFORONE, - datagrams); + err = ___sys_recvmsg(sock, + (struct msghdr __user *)entry, + &msg_sys, flags & ~MSG_WAITFORONE, + datagrams); if (err < 0) break; err = put_user(err, &entry->msg_len); @@ -2505,31 +2515,15 @@ SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args) (int __user *)a[4]); break; case SYS_SENDMSG: - if (a[2] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_sendmsg(a0, (struct msghdr __user *)a1, a[2]); break; case SYS_SENDMMSG: - if (a[3] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_sendmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3]); break; case SYS_RECVMSG: - if (a[2] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]); break; case SYS_RECVMMSG: - if (a[3] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_recvmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3], (struct timespec __user *)a[4]); break; From 7cd8407d53ef5fb0280fcbe34f42311472f90feb Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 5 Jun 2013 14:01:19 +0200 Subject: [PATCH 419/429] ACPI / PM: Do not execute _PS0 for devices without _PSC during initialization Commit b378549 (ACPI / PM: Do not power manage devices in unknown initial states) added code to force devices without _PSC, but having _PS0 defined in the ACPI namespace, into ACPI power state D0 by executing _PS0 for them. That turned out to break Toshiba P870-303, however, so revert that code. References: https://bugzilla.kernel.org/show_bug.cgi?id=58201 Reported-and-tested-by: Jerome Cantenot Tracked-down-by: Lan Tianyu Cc: 3.9+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/device_pm.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index bc493aa3af19..318fa32a141e 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -278,11 +278,13 @@ int acpi_bus_init_power(struct acpi_device *device) if (result) return result; } else if (state == ACPI_STATE_UNKNOWN) { - /* No power resources and missing _PSC? Try to force D0. */ + /* + * No power resources and missing _PSC? Cross fingers and make + * it D0 in hope that this is what the BIOS put the device into. + * [We tried to force D0 here by executing _PS0, but that broke + * Toshiba P870-303 in a nasty way.] + */ state = ACPI_STATE_D0; - result = acpi_dev_pm_explicit_set(device, state); - if (result) - return result; } device->power.state = state; return 0; From bcc567e3115055a9cc256183d72864f01286be22 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 23 May 2013 14:29:53 +0300 Subject: [PATCH 420/429] dmatest: do not allow to interrupt ongoing tests When user interrupts ongoing transfers the dmatest may end up with console lockup, oops, or data mismatch. This patch prevents user to abort any ongoing test. Documentation is updated accordingly. Signed-off-by: Andy Shevchenko Reported-by: Will Deacon Tested-by: Will Deacon Signed-off-by: Vinod Koul --- Documentation/dmatest.txt | 6 +++--- drivers/dma/dmatest.c | 45 ++++++++++++++++++++------------------- 2 files changed, 26 insertions(+), 25 deletions(-) diff --git a/Documentation/dmatest.txt b/Documentation/dmatest.txt index 279ac0a8c5b1..132a094c7bc3 100644 --- a/Documentation/dmatest.txt +++ b/Documentation/dmatest.txt @@ -34,7 +34,7 @@ command: After a while you will start to get messages about current status or error like in the original code. -Note that running a new test will stop any in progress test. +Note that running a new test will not stop any in progress test. The following command should return actual state of the test. % cat /sys/kernel/debug/dmatest/run @@ -52,8 +52,8 @@ To wait for test done the user may perform a busy loop that checks the state. The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be -interrupted or re-run with same or different parameters. For the details see -the above section "Part 2 - When dmatest is built as a module..." +re-run with the same or different parameters. For the details see the above +section "Part 2 - When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index d8ce4ecfef18..e88ded2c8d2f 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -716,8 +716,7 @@ static int dmatest_func(void *data) } dma_async_issue_pending(chan); - wait_event_freezable_timeout(done_wait, - done.done || kthread_should_stop(), + wait_event_freezable_timeout(done_wait, done.done, msecs_to_jiffies(params->timeout)); status = dma_async_is_tx_complete(chan, cookie, NULL, NULL); @@ -997,7 +996,6 @@ static void stop_threaded_test(struct dmatest_info *info) static int __restart_threaded_test(struct dmatest_info *info, bool run) { struct dmatest_params *params = &info->params; - int ret; /* Stop any running test first */ __stop_threaded_test(info); @@ -1012,13 +1010,23 @@ static int __restart_threaded_test(struct dmatest_info *info, bool run) memcpy(params, &info->dbgfs_params, sizeof(*params)); /* Run test with new parameters */ - ret = __run_threaded_test(info); - if (ret) { - __stop_threaded_test(info); - pr_err("dmatest: Can't run test\n"); + return __run_threaded_test(info); +} + +static bool __is_threaded_test_run(struct dmatest_info *info) +{ + struct dmatest_chan *dtc; + + list_for_each_entry(dtc, &info->channels, node) { + struct dmatest_thread *thread; + + list_for_each_entry(thread, &dtc->threads, node) { + if (!thread->done) + return true; + } } - return ret; + return false; } static ssize_t dtf_write_string(void *to, size_t available, loff_t *ppos, @@ -1091,22 +1099,10 @@ static ssize_t dtf_read_run(struct file *file, char __user *user_buf, { struct dmatest_info *info = file->private_data; char buf[3]; - struct dmatest_chan *dtc; - bool alive = false; mutex_lock(&info->lock); - list_for_each_entry(dtc, &info->channels, node) { - struct dmatest_thread *thread; - list_for_each_entry(thread, &dtc->threads, node) { - if (!thread->done) { - alive = true; - break; - } - } - } - - if (alive) { + if (__is_threaded_test_run(info)) { buf[0] = 'Y'; } else { __stop_threaded_test(info); @@ -1132,7 +1128,12 @@ static ssize_t dtf_write_run(struct file *file, const char __user *user_buf, if (strtobool(buf, &bv) == 0) { mutex_lock(&info->lock); - ret = __restart_threaded_test(info, bv); + + if (__is_threaded_test_run(info)) + ret = -EBUSY; + else + ret = __restart_threaded_test(info, bv); + mutex_unlock(&info->lock); } From 437d8ac510b90610da814ae25a7b79aaf3b4910f Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Tue, 4 Jun 2013 09:49:10 +0530 Subject: [PATCH 421/429] ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is defined Printing low-level debug messages make an assumption that the specified UART port has been preconfigured by the bootloader. Incorrectly specified UART port results in system getting stalled while printing the message "Uncompressing Linux... done, booting the kernel" This UART port number is specified through S3C_LOWLEVEL_UART_PORT. Since the UART port might different for different board, it is not possible to specify it correctly for every board that use a common defconfig file. Calling this print subroutine only when DEBUG_LL fixes the problem. By disabling DEBUG_LL in default config file, we would be able to boot multiple boards with different default UART ports. With this current approach, we miss the print "Uncompressing Linux... done, booting the kernel." when DEBUG_LL is not defined. Signed-off-by: Tushar Behera Signed-off-by: Olof Johansson --- arch/arm/plat-samsung/include/plat/uncompress.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h index 438b24846e7f..02b66d723d1a 100644 --- a/arch/arm/plat-samsung/include/plat/uncompress.h +++ b/arch/arm/plat-samsung/include/plat/uncompress.h @@ -66,6 +66,9 @@ uart_rd(unsigned int reg) static void putc(int ch) { + if (!config_enabled(CONFIG_DEBUG_LL)) + return; + if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) { int level; @@ -118,7 +121,12 @@ static void arch_decomp_error(const char *x) #ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO static inline void arch_enable_uart_fifo(void) { - u32 fifocon = uart_rd(S3C2410_UFCON); + u32 fifocon; + + if (!config_enabled(CONFIG_DEBUG_LL)) + return; + + fifocon = uart_rd(S3C2410_UFCON); if (!(fifocon & S3C2410_UFCON_FIFOMODE)) { fifocon |= S3C2410_UFCON_RESETBOTH; From 9c1fcdccc7ce5611ec1edf45dbbe51b10e333bd3 Mon Sep 17 00:00:00 2001 From: Doug Anderson Date: Wed, 5 Jun 2013 13:56:33 -0700 Subject: [PATCH 422/429] ARM: exynos: add debug_ll_io_init() call in exynos_init_io() If the early MMU mapping of the UART happens to get booted out of the TLB between the start of paging_init() and when we finally re-add the UART at the very end of s3c_init_cpu(), we'll get a hang at bootup if we've got early_printk enabled. Avoid this hang by calling debug_ll_io_init() early. Without this patch, you can reliably reproduce a hang when early printk is enabled by adding flush_tlb_all() at the start of exynos_init_io(). After this patch the hang goes away. Signed-off-by: Doug Anderson Acked-by: Kukjin Kim Signed-off-by: Olof Johansson --- arch/arm/mach-exynos/common.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 027c9e7f0d13..f7e504b7874d 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -386,6 +386,8 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, void __init exynos_init_io(struct map_desc *mach_desc, int size) { + debug_ll_io_init(); + #ifdef CONFIG_OF if (initial_boot_params) of_scan_flat_dt(exynos_fdt_map_chipid, NULL); From ea7f665612fcc73da6b7698f468cd5fc03a30d47 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 8 Jun 2013 02:55:07 +0200 Subject: [PATCH 423/429] Revert "ACPI / scan: do not match drivers against objects having scan handlers" Commit 9f29ab11ddbf ("ACPI / scan: do not match drivers against objects having scan handlers") introduced a boot regression on Tony's ia64 HP rx2600. Tony says: "It panics with the message: Kernel panic - not syncing: Unable to find SBA IOMMU: Try a generic or DIG kernel [...] my problem comes from arch/ia64/hp/common/sba_iommu.c where the code in sba_init() says: acpi_bus_register_driver(&acpi_sba_ioc_driver); if (!ioc_list) { but because of this change we never managed to call ioc_init() so ioc_list doesn't get set up, and we die." Revert it to avoid this breakage and we'll fix the problem it attempted to address later. Reported-by: Tony Luck Cc: 3.9+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- drivers/acpi/scan.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 90c5759e1355..44225cb15f3a 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -740,10 +740,6 @@ static int acpi_bus_match(struct device *dev, struct device_driver *drv) struct acpi_device *acpi_dev = to_acpi_device(dev); struct acpi_driver *acpi_drv = to_acpi_driver(drv); - /* Skip ACPI device objects with scan handlers attached. */ - if (acpi_dev->handler) - return 0; - return acpi_dev->flags.match_driver && !acpi_match_device_ids(acpi_dev, acpi_drv->ids); } From 346dbb79ea0118ebb0df372b35cab9d5805216cd Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 25 Apr 2013 19:28:54 +0200 Subject: [PATCH 424/429] irqdomain: export irq_domain_add_simple All other irq_domain_add_* functions are exported already, and apparently this one got left out by mistake, which causes build errors for ARM allmodconfig kernels: ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-rcar.ko] undefined! ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-em.ko] undefined! Signed-off-by: Arnd Bergmann Acked-by: Simon Horman Signed-off-by: Grant Likely --- kernel/irq/irqdomain.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 5a83dde8ca0c..d1adaedb435f 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -191,6 +191,7 @@ struct irq_domain *irq_domain_add_simple(struct device_node *of_node, /* A linear domain is the default */ return irq_domain_add_linear(of_node, size, ops, host_data); } +EXPORT_SYMBOL_GPL(irq_domain_add_simple); /** * irq_domain_add_legacy() - Allocate and register a legacy revmap irq_domain. From 275e31b10ce20613aedceaa5160129c64b260a98 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Tue, 14 May 2013 19:02:45 +0800 Subject: [PATCH 425/429] kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid. Since irq_data may be NULL, if so, we WARN_ON(), and continue, 'hwirq' which related with 'irq_data' has to initialize later, or it will cause issue. Signed-off-by: Chen Gang Signed-off-by: Grant Likely --- kernel/irq/irqdomain.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index d1adaedb435f..8c4c8ea6a205 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -398,11 +398,12 @@ static void irq_domain_disassociate_many(struct irq_domain *domain, while (count--) { int irq = irq_base + count; struct irq_data *irq_data = irq_get_irq_data(irq); - irq_hw_number_t hwirq = irq_data->hwirq; + irq_hw_number_t hwirq; if (WARN_ON(!irq_data || irq_data->domain != domain)) continue; + hwirq = irq_data->hwirq; irq_set_status_flags(irq, IRQ_NOREQUEST); /* remove chip and handler */ From 94a63da0ac1a67bfb8b30aec1086523c5031ea5a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 6 Jun 2013 12:10:23 +0100 Subject: [PATCH 426/429] irqdomain: document the simple domain first_irq The first_irq needs to be zero to get a linear domain and that comes with special semantics. We want to simplify this going forward but some documentation never hurts. Signed-off-by: Linus Walleij Signed-off-by: Grant Likely --- kernel/irq/irqdomain.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c index 8c4c8ea6a205..54a4d5223238 100644 --- a/kernel/irq/irqdomain.c +++ b/kernel/irq/irqdomain.c @@ -143,7 +143,10 @@ static unsigned int irq_domain_legacy_revmap(struct irq_domain *domain, * irq_domain_add_simple() - Allocate and register a simple irq_domain. * @of_node: pointer to interrupt controller's device tree node. * @size: total number of irqs in mapping - * @first_irq: first number of irq block assigned to the domain + * @first_irq: first number of irq block assigned to the domain, + * pass zero to assign irqs on-the-fly. This will result in a + * linear IRQ domain so it is important to use irq_create_mapping() + * for each used IRQ, especially when SPARSE_IRQ is enabled. * @ops: map/unmap domain callbacks * @host_data: Controller private data pointer * From d94ea3f6d21e8b4398285516cc307c81d7374ec9 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 6 Jun 2013 14:11:38 +0100 Subject: [PATCH 427/429] irqchip: Return -EPERM for reserved IRQs The irqdomain core will report a log message for any attempted map call that fails unless the error code is -EPERM. This patch changes the Versatile irq controller drivers to use -EPERM because it is normal for a subset of the IRQ inputs to be marked as reserved on the various Versatile platforms. Signed-off-by: Grant Likely --- drivers/irqchip/irq-versatile-fpga.c | 2 +- drivers/irqchip/irq-vic.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/irqchip/irq-versatile-fpga.c b/drivers/irqchip/irq-versatile-fpga.c index 065b7a31a478..47a52ab580d8 100644 --- a/drivers/irqchip/irq-versatile-fpga.c +++ b/drivers/irqchip/irq-versatile-fpga.c @@ -119,7 +119,7 @@ static int fpga_irqdomain_map(struct irq_domain *d, unsigned int irq, /* Skip invalid IRQs, only register handlers for the real ones */ if (!(f->valid & BIT(hwirq))) - return -ENOTSUPP; + return -EPERM; irq_set_chip_data(irq, f); irq_set_chip_and_handler(irq, &f->chip, handle_level_irq); diff --git a/drivers/irqchip/irq-vic.c b/drivers/irqchip/irq-vic.c index 884d11c7355f..2bbb00404cf5 100644 --- a/drivers/irqchip/irq-vic.c +++ b/drivers/irqchip/irq-vic.c @@ -197,7 +197,7 @@ static int vic_irqdomain_map(struct irq_domain *d, unsigned int irq, /* Skip invalid IRQs, only register handlers for the real ones */ if (!(v->valid_sources & (1 << hwirq))) - return -ENOTSUPP; + return -EPERM; irq_set_chip_and_handler(irq, &vic_chip, handle_level_irq); irq_set_chip_data(irq, v->base); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); From bbd465df73f0d8ba41b8a0732766a243d0f5b356 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sun, 9 Jun 2013 01:25:57 +0200 Subject: [PATCH 428/429] hpfs: fix warnings when the filesystem fills up This patch fixes warnings due to missing lock on write error path. WARNING: at fs/hpfs/hpfs_fn.h:353 hpfs_truncate+0x75/0x80 [hpfs]() Hardware name: empty Pid: 26563, comm: dd Tainted: P O 3.9.4 #12 Call Trace: hpfs_truncate+0x75/0x80 [hpfs] hpfs_write_begin+0x84/0x90 [hpfs] _hpfs_bmap+0x10/0x10 [hpfs] generic_file_buffered_write+0x121/0x2c0 __generic_file_aio_write+0x1c7/0x3f0 generic_file_aio_write+0x7c/0x100 do_sync_write+0x98/0xd0 hpfs_file_write+0xd/0x50 [hpfs] vfs_write+0xa2/0x160 sys_write+0x51/0xa0 page_fault+0x22/0x30 system_call_fastpath+0x1a/0x1f Signed-off-by: Mikulas Patocka Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Linus Torvalds --- fs/hpfs/file.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/hpfs/file.c b/fs/hpfs/file.c index 3027f4dbbab5..e4ba5fe4c3b5 100644 --- a/fs/hpfs/file.c +++ b/fs/hpfs/file.c @@ -109,10 +109,14 @@ static void hpfs_write_failed(struct address_space *mapping, loff_t to) { struct inode *inode = mapping->host; + hpfs_lock(inode->i_sb); + if (to > inode->i_size) { truncate_pagecache(inode, to, inode->i_size); hpfs_truncate(inode); } + + hpfs_unlock(inode->i_sb); } static int hpfs_write_begin(struct file *file, struct address_space *mapping, From 317ddd256b9c24b0d78fa8018f80f1e495481a10 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 8 Jun 2013 17:41:04 -0700 Subject: [PATCH 429/429] Linux 3.10-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 49aa84b9d2fb..90400165125e 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 10 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Unicycling Gorilla # *DOCUMENTATION*