|
|
|
@ -143,23 +143,23 @@ static bool wm9090_readable(struct device *dev, unsigned int reg)
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void wait_for_dc_servo(struct snd_soc_codec *codec)
|
|
|
|
|
static void wait_for_dc_servo(struct snd_soc_component *component)
|
|
|
|
|
{
|
|
|
|
|
unsigned int reg;
|
|
|
|
|
int count = 0;
|
|
|
|
|
|
|
|
|
|
dev_dbg(codec->dev, "Waiting for DC servo...\n");
|
|
|
|
|
dev_dbg(component->dev, "Waiting for DC servo...\n");
|
|
|
|
|
do {
|
|
|
|
|
count++;
|
|
|
|
|
msleep(1);
|
|
|
|
|
reg = snd_soc_read(codec, WM9090_DC_SERVO_READBACK_0);
|
|
|
|
|
dev_dbg(codec->dev, "DC servo status: %x\n", reg);
|
|
|
|
|
reg = snd_soc_component_read32(component, WM9090_DC_SERVO_READBACK_0);
|
|
|
|
|
dev_dbg(component->dev, "DC servo status: %x\n", reg);
|
|
|
|
|
} while ((reg & WM9090_DCS_CAL_COMPLETE_MASK)
|
|
|
|
|
!= WM9090_DCS_CAL_COMPLETE_MASK && count < 1000);
|
|
|
|
|
|
|
|
|
|
if ((reg & WM9090_DCS_CAL_COMPLETE_MASK)
|
|
|
|
|
!= WM9090_DCS_CAL_COMPLETE_MASK)
|
|
|
|
|
dev_err(codec->dev, "Timed out waiting for DC Servo\n");
|
|
|
|
|
dev_err(component->dev, "Timed out waiting for DC Servo\n");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static const DECLARE_TLV_DB_RANGE(in_tlv,
|
|
|
|
@ -251,22 +251,22 @@ SOC_SINGLE_TLV("MIXOUTR IN2B Volume", WM9090_OUTPUT_MIXER4, 0, 3, 1,
|
|
|
|
|
static int hp_ev(struct snd_soc_dapm_widget *w,
|
|
|
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
|
|
|
{
|
|
|
|
|
struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
|
|
|
|
|
unsigned int reg = snd_soc_read(codec, WM9090_ANALOGUE_HP_0);
|
|
|
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
|
|
|
unsigned int reg = snd_soc_component_read32(component, WM9090_ANALOGUE_HP_0);
|
|
|
|
|
|
|
|
|
|
switch (event) {
|
|
|
|
|
case SND_SOC_DAPM_POST_PMU:
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_CHARGE_PUMP_1,
|
|
|
|
|
WM9090_CP_ENA, WM9090_CP_ENA);
|
|
|
|
|
|
|
|
|
|
msleep(5);
|
|
|
|
|
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
|
|
|
|
|
WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA,
|
|
|
|
|
WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA);
|
|
|
|
|
|
|
|
|
|
reg |= WM9090_HPOUT1L_DLY | WM9090_HPOUT1R_DLY;
|
|
|
|
|
snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
|
|
|
|
|
snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg);
|
|
|
|
|
|
|
|
|
|
/* Start the DC servo. We don't currently use the
|
|
|
|
|
* ability to save the state since we don't have full
|
|
|
|
@ -274,16 +274,16 @@ static int hp_ev(struct snd_soc_dapm_widget *w,
|
|
|
|
|
* DC offsets; see the WM8904 driver for an example of
|
|
|
|
|
* doing so.
|
|
|
|
|
*/
|
|
|
|
|
snd_soc_write(codec, WM9090_DC_SERVO_0,
|
|
|
|
|
snd_soc_component_write(component, WM9090_DC_SERVO_0,
|
|
|
|
|
WM9090_DCS_ENA_CHAN_0 |
|
|
|
|
|
WM9090_DCS_ENA_CHAN_1 |
|
|
|
|
|
WM9090_DCS_TRIG_STARTUP_1 |
|
|
|
|
|
WM9090_DCS_TRIG_STARTUP_0);
|
|
|
|
|
wait_for_dc_servo(codec);
|
|
|
|
|
wait_for_dc_servo(component);
|
|
|
|
|
|
|
|
|
|
reg |= WM9090_HPOUT1R_OUTP | WM9090_HPOUT1R_RMV_SHORT |
|
|
|
|
|
WM9090_HPOUT1L_OUTP | WM9090_HPOUT1L_RMV_SHORT;
|
|
|
|
|
snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
|
|
|
|
|
snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case SND_SOC_DAPM_PRE_PMD:
|
|
|
|
@ -294,15 +294,15 @@ static int hp_ev(struct snd_soc_dapm_widget *w,
|
|
|
|
|
WM9090_HPOUT1R_DLY |
|
|
|
|
|
WM9090_HPOUT1R_OUTP);
|
|
|
|
|
|
|
|
|
|
snd_soc_write(codec, WM9090_ANALOGUE_HP_0, reg);
|
|
|
|
|
snd_soc_component_write(component, WM9090_ANALOGUE_HP_0, reg);
|
|
|
|
|
|
|
|
|
|
snd_soc_write(codec, WM9090_DC_SERVO_0, 0);
|
|
|
|
|
snd_soc_component_write(component, WM9090_DC_SERVO_0, 0);
|
|
|
|
|
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
|
|
|
|
|
WM9090_HPOUT1L_ENA | WM9090_HPOUT1R_ENA,
|
|
|
|
|
0);
|
|
|
|
|
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_CHARGE_PUMP_1,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_CHARGE_PUMP_1,
|
|
|
|
|
WM9090_CP_ENA, 0);
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
@ -419,10 +419,10 @@ static const struct snd_soc_dapm_route audio_map_in2_diff[] = {
|
|
|
|
|
{ "IN2A PGA", NULL, "IN2-" },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int wm9090_add_controls(struct snd_soc_codec *codec)
|
|
|
|
|
static int wm9090_add_controls(struct snd_soc_component *component)
|
|
|
|
|
{
|
|
|
|
|
struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
|
struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
|
|
|
|
|
struct wm9090_priv *wm9090 = snd_soc_component_get_drvdata(component);
|
|
|
|
|
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
snd_soc_dapm_new_controls(dapm, wm9090_dapm_widgets,
|
|
|
|
@ -430,7 +430,7 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
|
|
|
|
|
|
|
|
|
|
snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
|
|
|
|
|
|
|
|
|
|
snd_soc_add_codec_controls(codec, wm9090_controls,
|
|
|
|
|
snd_soc_add_component_controls(component, wm9090_controls,
|
|
|
|
|
ARRAY_SIZE(wm9090_controls));
|
|
|
|
|
|
|
|
|
|
if (wm9090->pdata.lin1_diff) {
|
|
|
|
@ -439,7 +439,7 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
|
|
|
|
|
} else {
|
|
|
|
|
snd_soc_dapm_add_routes(dapm, audio_map_in1_se,
|
|
|
|
|
ARRAY_SIZE(audio_map_in1_se));
|
|
|
|
|
snd_soc_add_codec_controls(codec, wm9090_in1_se_controls,
|
|
|
|
|
snd_soc_add_component_controls(component, wm9090_in1_se_controls,
|
|
|
|
|
ARRAY_SIZE(wm9090_in1_se_controls));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
@ -449,18 +449,18 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
|
|
|
|
|
} else {
|
|
|
|
|
snd_soc_dapm_add_routes(dapm, audio_map_in2_se,
|
|
|
|
|
ARRAY_SIZE(audio_map_in2_se));
|
|
|
|
|
snd_soc_add_codec_controls(codec, wm9090_in2_se_controls,
|
|
|
|
|
snd_soc_add_component_controls(component, wm9090_in2_se_controls,
|
|
|
|
|
ARRAY_SIZE(wm9090_in2_se_controls));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (wm9090->pdata.agc_ena) {
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm9090->pdata.agc); i++)
|
|
|
|
|
snd_soc_write(codec, WM9090_AGC_CONTROL_0 + i,
|
|
|
|
|
snd_soc_component_write(component, WM9090_AGC_CONTROL_0 + i,
|
|
|
|
|
wm9090->pdata.agc[i]);
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_3,
|
|
|
|
|
WM9090_AGC_ENA, WM9090_AGC_ENA);
|
|
|
|
|
} else {
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_3,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_3,
|
|
|
|
|
WM9090_AGC_ENA, 0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
@ -472,19 +472,19 @@ static int wm9090_add_controls(struct snd_soc_codec *codec)
|
|
|
|
|
* The machine driver should call this from their set_bias_level; if there
|
|
|
|
|
* isn't one then this can just be set as the set_bias_level function.
|
|
|
|
|
*/
|
|
|
|
|
static int wm9090_set_bias_level(struct snd_soc_codec *codec,
|
|
|
|
|
static int wm9090_set_bias_level(struct snd_soc_component *component,
|
|
|
|
|
enum snd_soc_bias_level level)
|
|
|
|
|
{
|
|
|
|
|
struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
|
|
|
|
|
struct wm9090_priv *wm9090 = snd_soc_component_get_drvdata(component);
|
|
|
|
|
|
|
|
|
|
switch (level) {
|
|
|
|
|
case SND_SOC_BIAS_ON:
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case SND_SOC_BIAS_PREPARE:
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_ANTIPOP2, WM9090_VMID_ENA,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_ANTIPOP2, WM9090_VMID_ENA,
|
|
|
|
|
WM9090_VMID_ENA);
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
|
|
|
|
|
WM9090_BIAS_ENA |
|
|
|
|
|
WM9090_VMID_RES_MASK,
|
|
|
|
|
WM9090_BIAS_ENA |
|
|
|
|
@ -493,7 +493,7 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec,
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case SND_SOC_BIAS_STANDBY:
|
|
|
|
|
if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_OFF) {
|
|
|
|
|
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
|
|
|
|
|
/* Restore the register cache */
|
|
|
|
|
regcache_sync(wm9090->regmap);
|
|
|
|
|
}
|
|
|
|
@ -502,9 +502,9 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec,
|
|
|
|
|
* ground referenced outputs and class D speaker mean that
|
|
|
|
|
* latency is not an issue.
|
|
|
|
|
*/
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_POWER_MANAGEMENT_1,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_POWER_MANAGEMENT_1,
|
|
|
|
|
WM9090_BIAS_ENA | WM9090_VMID_RES_MASK, 0);
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_ANTIPOP2,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_ANTIPOP2,
|
|
|
|
|
WM9090_VMID_ENA, 0);
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
@ -515,45 +515,49 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec,
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int wm9090_probe(struct snd_soc_codec *codec)
|
|
|
|
|
static int wm9090_probe(struct snd_soc_component *component)
|
|
|
|
|
{
|
|
|
|
|
/* Configure some defaults; they will be written out when we
|
|
|
|
|
* bring the bias up.
|
|
|
|
|
*/
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_A_VOLUME,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_IN1_LINE_INPUT_A_VOLUME,
|
|
|
|
|
WM9090_IN1_VU | WM9090_IN1A_ZC,
|
|
|
|
|
WM9090_IN1_VU | WM9090_IN1A_ZC);
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_IN1_LINE_INPUT_B_VOLUME,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_IN1_LINE_INPUT_B_VOLUME,
|
|
|
|
|
WM9090_IN1_VU | WM9090_IN1B_ZC,
|
|
|
|
|
WM9090_IN1_VU | WM9090_IN1B_ZC);
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_A_VOLUME,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_IN2_LINE_INPUT_A_VOLUME,
|
|
|
|
|
WM9090_IN2_VU | WM9090_IN2A_ZC,
|
|
|
|
|
WM9090_IN2_VU | WM9090_IN2A_ZC);
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_IN2_LINE_INPUT_B_VOLUME,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_IN2_LINE_INPUT_B_VOLUME,
|
|
|
|
|
WM9090_IN2_VU | WM9090_IN2B_ZC,
|
|
|
|
|
WM9090_IN2_VU | WM9090_IN2B_ZC);
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_SPEAKER_VOLUME_LEFT,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_SPEAKER_VOLUME_LEFT,
|
|
|
|
|
WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC,
|
|
|
|
|
WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC);
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_LEFT_OUTPUT_VOLUME,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_LEFT_OUTPUT_VOLUME,
|
|
|
|
|
WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC,
|
|
|
|
|
WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC);
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_RIGHT_OUTPUT_VOLUME,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_RIGHT_OUTPUT_VOLUME,
|
|
|
|
|
WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC,
|
|
|
|
|
WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC);
|
|
|
|
|
|
|
|
|
|
snd_soc_update_bits(codec, WM9090_CLOCKING_1,
|
|
|
|
|
snd_soc_component_update_bits(component, WM9090_CLOCKING_1,
|
|
|
|
|
WM9090_TOCLK_ENA, WM9090_TOCLK_ENA);
|
|
|
|
|
|
|
|
|
|
wm9090_add_controls(codec);
|
|
|
|
|
wm9090_add_controls(component);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static const struct snd_soc_codec_driver soc_codec_dev_wm9090 = {
|
|
|
|
|
.probe = wm9090_probe,
|
|
|
|
|
.set_bias_level = wm9090_set_bias_level,
|
|
|
|
|
.suspend_bias_off = true,
|
|
|
|
|
static const struct snd_soc_component_driver soc_component_dev_wm9090 = {
|
|
|
|
|
.probe = wm9090_probe,
|
|
|
|
|
.set_bias_level = wm9090_set_bias_level,
|
|
|
|
|
.suspend_bias_off = 1,
|
|
|
|
|
.idle_bias_on = 1,
|
|
|
|
|
.use_pmdown_time = 1,
|
|
|
|
|
.endianness = 1,
|
|
|
|
|
.non_legacy_dai_naming = 1,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct regmap_config wm9090_regmap = {
|
|
|
|
@ -607,8 +611,8 @@ static int wm9090_i2c_probe(struct i2c_client *i2c,
|
|
|
|
|
|
|
|
|
|
i2c_set_clientdata(i2c, wm9090);
|
|
|
|
|
|
|
|
|
|
ret = snd_soc_register_codec(&i2c->dev,
|
|
|
|
|
&soc_codec_dev_wm9090, NULL, 0);
|
|
|
|
|
ret = devm_snd_soc_register_component(&i2c->dev,
|
|
|
|
|
&soc_component_dev_wm9090, NULL, 0);
|
|
|
|
|
if (ret != 0) {
|
|
|
|
|
dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
|
|
|
|
|
return ret;
|
|
|
|
@ -617,12 +621,6 @@ static int wm9090_i2c_probe(struct i2c_client *i2c,
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int wm9090_i2c_remove(struct i2c_client *i2c)
|
|
|
|
|
{
|
|
|
|
|
snd_soc_unregister_codec(&i2c->dev);
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static const struct i2c_device_id wm9090_id[] = {
|
|
|
|
|
{ "wm9090", 0 },
|
|
|
|
|
{ "wm9093", 0 },
|
|
|
|
@ -635,7 +633,6 @@ static struct i2c_driver wm9090_i2c_driver = {
|
|
|
|
|
.name = "wm9090",
|
|
|
|
|
},
|
|
|
|
|
.probe = wm9090_i2c_probe,
|
|
|
|
|
.remove = wm9090_i2c_remove,
|
|
|
|
|
.id_table = wm9090_id,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|