Qualcomm ARM64 Updates for v5.2
* Add gpio ranges for Qualcomm platforms * Fix MSM8998 BLSP2 I2C5 address * Add MSM8998 UFS nodes and associated information * Add SDM845 interconnect header and usage * Add ADSP and CDSP PAS, RMTFS memory, and UFS phy reset on SDM845 * Update reserved memory map on SDM845 * Add QCS404 spmi regulators, ethernet, bluetooth, and uart3 * Remove remotely-controlled property as default for BAM on QCS404 * Add spmi regulators on PMS405 * Fixup QCS404 l3 voltages and regulator supply names * Fixup thermal trip names on Qualcomm platforms * Add thermal sensors on Qualcomm platforms * Remove invalid efficiency property on MSM8998 * Change QCS404-evb compatible to help distinguish platforms * Add rpmhd header file and convert to use definitions on SDM845 * Add interconnect header file on SDM845 * Add PMS405 ADC binding -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJcvp8dAAoJEFKiBbHx2RXV0lcQAMhrmgw9ZM72Nx3pNR0dwdqW fDoLxKPmV36ZO7EYmnV2CHwAH4a0wVzLsySD8yI/BuxzDplg1sxvKGQ9QDOxZmhn jFLX05qBDz67Zs1gwH8g2fVs/7cZCu0epNNhgZeTzSvfRORaXpfaNkPslpvUPhBs 08++Brs6LQhGTf9xW+0I6JBUPg7QRKA2ZoiFdZ/x0SYX4nKFqnAuVqj3XZnYWe2C Wt9kYceYSOnw0dfa4cV2Q85a5wKQjbb/fLtZyLUGgfKbGpZO8L5GeJDyuLaugvzB 4aT63m9foJRi2RePjQXq4nQQQPdFNXwcWHLR02svjq2IJaZQfRnzZbxKAzr5DraH ZaUchXLn8yvpTCm04lRZYNzea2ltQ26mCTFG2RGtCR/WMqJ9zh6Er1vgn4lvSdCZ ejsK2VNTUP9fpwVefObJUdEyS65ca5P1uKZVavwV6E64l8SaWwthGB+f24r/t7Om 4zVpxS/QuQdstIns09En69Hee0cQetG8JdP0fFserhAauZTQsWShzsnc8scdOCXB /rm8XbsHKoitIZgJy+v5c82OfRvKC8wtnRT5RbLH+s/dHBzxhNMjSQ4FDAkwDTZT cb1SU4r44/iQ8XngbukVGyPTYnm0ECF8jqdMgV00GnEPn8Donc/HTQ52pxtXKdie FS0vEami4Q8R+KwG5fFv =piHY -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt Qualcomm ARM64 Updates for v5.2 * Add gpio ranges for Qualcomm platforms * Fix MSM8998 BLSP2 I2C5 address * Add MSM8998 UFS nodes and associated information * Add SDM845 interconnect header and usage * Add ADSP and CDSP PAS, RMTFS memory, and UFS phy reset on SDM845 * Update reserved memory map on SDM845 * Add QCS404 spmi regulators, ethernet, bluetooth, and uart3 * Remove remotely-controlled property as default for BAM on QCS404 * Add spmi regulators on PMS405 * Fixup QCS404 l3 voltages and regulator supply names * Fixup thermal trip names on Qualcomm platforms * Add thermal sensors on Qualcomm platforms * Remove invalid efficiency property on MSM8998 * Change QCS404-evb compatible to help distinguish platforms * Add rpmhd header file and convert to use definitions on SDM845 * Add interconnect header file on SDM845 * Add PMS405 ADC binding * tag 'qcom-arm64-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (38 commits) arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes arm64: dts: qcom: sdm845: Define rmtfs memory arm64: dts: qcom: sdm845: Update reserved memory map arm64: dts: sdm845: Add UFS PHY reset arm64: dts: qcom: msm8998: Fix blsp2_i2c5 address arm64: dts: qcom: qcs404-evb: Change the compatible to distinguish platforms arm64: dts: qcom: pmi8998: add gpio-ranges arm64: dts: qcom: pmi8994: add gpio-ranges arm64: dts: qcom: pm8998: add gpio-ranges arm64: dts: qcom: pm8005: add gpio-ranges arm64: dts: msm8998: Add UFS phy reset arm64: dts: msm8916: thermal: Convert camera trip type to hot arm64: dts: msm8996: thermal: Make trip names consistent arm64: dts: msm8916: thermal: Make trip names consistent arm64: dts: msm8998: thermal: Make trip names consistent arm64: dts: sdm845: thermal: Add temperature sensors near major peripherals arm64: dts: msm8998: thermal: Add temperature sensors near major peripherals arm64: dts: msm8998: thermal: GPU has two sensors, add the second arm64: dts: msm8998: thermal: Fix the gpu sensor number arm64: dts: msm8998: thermal: Fix the cpu sensor numbers ... Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson
Коммит
38c2f3826d
|
|
@ -13,6 +13,7 @@ VADC node:
|
|||
Definition: Should contain "qcom,spmi-vadc".
|
||||
Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
|
||||
Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
|
||||
Should contain "qcom,pms405-adc" for PMS405 PMIC
|
||||
|
||||
- reg:
|
||||
Usage: required
|
||||
|
|
|
|||
|
|
@ -11,6 +11,7 @@ Required properties:
|
|||
the appropriate jedec string:
|
||||
"qcom,msm8994-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
|
||||
"qcom,msm8996-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
|
||||
"qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
|
||||
"qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"
|
||||
- interrupts : <interrupt mapping for UFS host controller IRQ>
|
||||
- reg : <registers mapping>
|
||||
|
|
|
|||
|
|
@ -180,19 +180,19 @@
|
|||
};
|
||||
|
||||
thermal-zones {
|
||||
cpu-thermal0 {
|
||||
cpu0_1-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens 4>;
|
||||
|
||||
trips {
|
||||
cpu_alert0: trip0 {
|
||||
cpu0_1_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
cpu_crit0: trip1 {
|
||||
cpu0_1_crit: cpu_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
|
|
@ -201,7 +201,7 @@
|
|||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
trip = <&cpu_alert0>;
|
||||
trip = <&cpu0_1_alert0>;
|
||||
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
|
|
@ -210,19 +210,19 @@
|
|||
};
|
||||
};
|
||||
|
||||
cpu-thermal1 {
|
||||
cpu2_3-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens 3>;
|
||||
|
||||
trips {
|
||||
cpu_alert1: trip0 {
|
||||
cpu2_3_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
cpu_crit1: trip1 {
|
||||
cpu2_3_crit: cpu_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
|
|
@ -231,7 +231,7 @@
|
|||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
trip = <&cpu_alert1>;
|
||||
trip = <&cpu2_3_alert0>;
|
||||
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
|
|
@ -247,12 +247,12 @@
|
|||
thermal-sensors = <&tsens 2>;
|
||||
|
||||
trips {
|
||||
gpu_alert: trip0 {
|
||||
gpu_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
gpu_crit: trip1 {
|
||||
gpu_crit: gpu_crit {
|
||||
temperature = <95000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
|
|
@ -267,18 +267,27 @@
|
|||
thermal-sensors = <&tsens 1>;
|
||||
|
||||
trips {
|
||||
cam_alert: trip0 {
|
||||
cam_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
cam_crit: trip1 {
|
||||
temperature = <95000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
modem-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens 0>;
|
||||
|
||||
trips {
|
||||
modem_alert0: trip-point@0 {
|
||||
temperature = <85000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
|
|
|||
|
|
@ -154,20 +154,20 @@
|
|||
};
|
||||
|
||||
thermal-zones {
|
||||
cpu-thermal0 {
|
||||
cpu0-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 3>;
|
||||
|
||||
trips {
|
||||
cpu_alert0: trip0 {
|
||||
cpu0_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_crit0: trip1 {
|
||||
cpu0_crit: cpu_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
|
|
@ -175,20 +175,20 @@
|
|||
};
|
||||
};
|
||||
|
||||
cpu-thermal1 {
|
||||
cpu1-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 5>;
|
||||
|
||||
trips {
|
||||
cpu_alert1: trip0 {
|
||||
cpu1_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_crit1: trip1 {
|
||||
cpu1_crit: cpu_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
|
|
@ -196,20 +196,20 @@
|
|||
};
|
||||
};
|
||||
|
||||
cpu-thermal2 {
|
||||
cpu2-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 8>;
|
||||
|
||||
trips {
|
||||
cpu_alert2: trip0 {
|
||||
cpu2_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_crit2: trip1 {
|
||||
cpu2_crit: cpu_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
|
|
@ -217,26 +217,176 @@
|
|||
};
|
||||
};
|
||||
|
||||
cpu-thermal3 {
|
||||
cpu3-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 10>;
|
||||
|
||||
trips {
|
||||
cpu_alert3: trip0 {
|
||||
cpu3_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_crit3: trip1 {
|
||||
cpu3_crit: cpu_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpu-thermal-top {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 6>;
|
||||
|
||||
trips {
|
||||
gpu1_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpu-thermal-bottom {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 7>;
|
||||
|
||||
trips {
|
||||
gpu2_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
m4m-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 1>;
|
||||
|
||||
trips {
|
||||
m4m_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
l3-or-venus-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 2>;
|
||||
|
||||
trips {
|
||||
l3_or_venus_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cluster0-l2-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 7>;
|
||||
|
||||
trips {
|
||||
cluster0_l2_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cluster1-l2-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 12>;
|
||||
|
||||
trips {
|
||||
cluster1_l2_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
camera-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 1>;
|
||||
|
||||
trips {
|
||||
camera_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
q6-dsp-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 2>;
|
||||
|
||||
trips {
|
||||
q6_dsp_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mem-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 3>;
|
||||
|
||||
trips {
|
||||
mem_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
modemtx-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 4>;
|
||||
|
||||
trips {
|
||||
modemtx_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
timer {
|
||||
|
|
|
|||
|
|
@ -111,6 +111,7 @@
|
|||
vreg_s4a_1p8: s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
vreg_s5a_2p04: s5 {
|
||||
regulator-min-microvolt = <1904000>;
|
||||
|
|
@ -195,6 +196,7 @@
|
|||
vreg_l20a_2p95: l20 {
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
vreg_l21a_2p95: l21 {
|
||||
regulator-min-microvolt = <2960000>;
|
||||
|
|
@ -221,6 +223,7 @@
|
|||
vreg_l26a_1p2: l26 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
vreg_l28_3p0: l28 {
|
||||
regulator-min-microvolt = <3008000>;
|
||||
|
|
@ -267,6 +270,25 @@
|
|||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||||
};
|
||||
|
||||
&ufshc {
|
||||
vcc-supply = <&vreg_l20a_2p95>;
|
||||
vccq-supply = <&vreg_l26a_1p2>;
|
||||
vccq2-supply = <&vreg_s4a_1p8>;
|
||||
vcc-max-microamp = <750000>;
|
||||
vccq-max-microamp = <560000>;
|
||||
vccq2-max-microamp = <750000>;
|
||||
};
|
||||
|
||||
&ufsphy {
|
||||
vdda-phy-supply = <&vreg_l1a_0p875>;
|
||||
vdda-pll-supply = <&vreg_l2a_1p2>;
|
||||
vddp-ref-clk-supply = <&vreg_l26a_1p2>;
|
||||
vdda-phy-max-microamp = <51400>;
|
||||
vdda-pll-max-microamp = <14600>;
|
||||
vddp-ref-clk-max-microamp = <100>;
|
||||
vddp-ref-clk-always-on;
|
||||
};
|
||||
|
||||
&usb3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -78,7 +78,6 @@
|
|||
compatible = "arm,armv8";
|
||||
reg = <0x0 0x0>;
|
||||
enable-method = "psci";
|
||||
efficiency = <1024>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L2_0: l2-cache {
|
||||
compatible = "arm,arch-cache";
|
||||
|
|
@ -97,7 +96,6 @@
|
|||
compatible = "arm,armv8";
|
||||
reg = <0x0 0x1>;
|
||||
enable-method = "psci";
|
||||
efficiency = <1024>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L1_I_1: l1-icache {
|
||||
compatible = "arm,arch-cache";
|
||||
|
|
@ -112,7 +110,6 @@
|
|||
compatible = "arm,armv8";
|
||||
reg = <0x0 0x2>;
|
||||
enable-method = "psci";
|
||||
efficiency = <1024>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L1_I_2: l1-icache {
|
||||
compatible = "arm,arch-cache";
|
||||
|
|
@ -127,7 +124,6 @@
|
|||
compatible = "arm,armv8";
|
||||
reg = <0x0 0x3>;
|
||||
enable-method = "psci";
|
||||
efficiency = <1024>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L1_I_3: l1-icache {
|
||||
compatible = "arm,arch-cache";
|
||||
|
|
@ -142,7 +138,6 @@
|
|||
compatible = "arm,armv8";
|
||||
reg = <0x0 0x100>;
|
||||
enable-method = "psci";
|
||||
efficiency = <1536>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L2_1: l2-cache {
|
||||
compatible = "arm,arch-cache";
|
||||
|
|
@ -161,7 +156,6 @@
|
|||
compatible = "arm,armv8";
|
||||
reg = <0x0 0x101>;
|
||||
enable-method = "psci";
|
||||
efficiency = <1536>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L1_I_101: l1-icache {
|
||||
compatible = "arm,arch-cache";
|
||||
|
|
@ -176,7 +170,6 @@
|
|||
compatible = "arm,armv8";
|
||||
reg = <0x0 0x102>;
|
||||
enable-method = "psci";
|
||||
efficiency = <1536>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L1_I_102: l1-icache {
|
||||
compatible = "arm,arch-cache";
|
||||
|
|
@ -191,7 +184,6 @@
|
|||
compatible = "arm,armv8";
|
||||
reg = <0x0 0x103>;
|
||||
enable-method = "psci";
|
||||
efficiency = <1536>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L1_I_103: l1-icache {
|
||||
compatible = "arm,arch-cache";
|
||||
|
|
@ -346,20 +338,20 @@
|
|||
};
|
||||
|
||||
thermal-zones {
|
||||
cpu-thermal0 {
|
||||
cpu0-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 6>;
|
||||
thermal-sensors = <&tsens0 1>;
|
||||
|
||||
trips {
|
||||
cpu_alert0: trip0 {
|
||||
cpu0_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_crit0: trip1 {
|
||||
cpu0_crit: cpu_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
|
|
@ -367,20 +359,83 @@
|
|||
};
|
||||
};
|
||||
|
||||
cpu-thermal1 {
|
||||
cpu1-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 2>;
|
||||
|
||||
trips {
|
||||
cpu1_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu1_crit: cpu_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cpu2-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 3>;
|
||||
|
||||
trips {
|
||||
cpu2_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu2_crit: cpu_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cpu3-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 4>;
|
||||
|
||||
trips {
|
||||
cpu3_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu3_crit: cpu_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cpu4-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 7>;
|
||||
|
||||
trips {
|
||||
cpu_alert1: trip0 {
|
||||
cpu4_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_crit1: trip1 {
|
||||
cpu4_crit: cpu_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
|
|
@ -388,20 +443,20 @@
|
|||
};
|
||||
};
|
||||
|
||||
cpu-thermal2 {
|
||||
cpu5-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 8>;
|
||||
|
||||
trips {
|
||||
cpu_alert2: trip0 {
|
||||
cpu5_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_crit2: trip1 {
|
||||
cpu5_crit: cpu_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
|
|
@ -409,20 +464,20 @@
|
|||
};
|
||||
};
|
||||
|
||||
cpu-thermal3 {
|
||||
cpu6-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 9>;
|
||||
|
||||
trips {
|
||||
cpu_alert3: trip0 {
|
||||
cpu6_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_crit3: trip1 {
|
||||
cpu6_crit: cpu_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
|
|
@ -430,20 +485,20 @@
|
|||
};
|
||||
};
|
||||
|
||||
cpu-thermal4 {
|
||||
cpu7-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 10>;
|
||||
|
||||
trips {
|
||||
cpu_alert4: trip0 {
|
||||
cpu7_alert0: trip-point@0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_crit4: trip1 {
|
||||
cpu7_crit: cpu_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
|
|
@ -451,74 +506,169 @@
|
|||
};
|
||||
};
|
||||
|
||||
cpu-thermal5 {
|
||||
gpu-thermal-bottom {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 12>;
|
||||
|
||||
trips {
|
||||
gpu1_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpu-thermal-top {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 13>;
|
||||
|
||||
trips {
|
||||
gpu2_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cluster0-mhm-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 5>;
|
||||
|
||||
trips {
|
||||
cluster0_mhm_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cluster1-mhm-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 6>;
|
||||
|
||||
trips {
|
||||
cluster1_mhm_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cluster1-l2-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 11>;
|
||||
|
||||
trips {
|
||||
cpu_alert5: trip0 {
|
||||
temperature = <75000>;
|
||||
cluster1_l2_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_crit5: trip1 {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cpu-thermal6 {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 0>;
|
||||
|
||||
trips {
|
||||
cpu_alert6: trip0 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_crit6: trip1 {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cpu-thermal7 {
|
||||
modem-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 1>;
|
||||
|
||||
trips {
|
||||
cpu_alert7: trip0 {
|
||||
temperature = <75000>;
|
||||
modem_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_crit7: trip1 {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpu-thermal {
|
||||
mem-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 2>;
|
||||
|
||||
trips {
|
||||
mem_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
wlan-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 3>;
|
||||
|
||||
trips {
|
||||
wlan_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
q6-dsp-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 4>;
|
||||
|
||||
trips {
|
||||
q6_dsp_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
camera-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 5>;
|
||||
|
||||
trips {
|
||||
camera_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
multimedia-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 6>;
|
||||
|
||||
trips {
|
||||
multimedia_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -590,17 +740,19 @@
|
|||
cell-index = <0>;
|
||||
};
|
||||
|
||||
tsens0: thermal@10aa000 {
|
||||
tsens0: thermal@10ab000 {
|
||||
compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
|
||||
reg = <0x10aa000 0x2000>;
|
||||
reg = <0x10ab000 0x1000>, /* TM */
|
||||
<0x10aa000 0x1000>; /* SROT */
|
||||
|
||||
#qcom,sensors = <12>;
|
||||
#thermal-sensor-cells = <1>;
|
||||
};
|
||||
|
||||
tsens1: thermal@10ad000 {
|
||||
tsens1: thermal@10ae000 {
|
||||
compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
|
||||
reg = <0x10ad000 0x2000>;
|
||||
reg = <0x10ae000 0x1000>, /* TM */
|
||||
<0x10ad000 0x1000>; /* SROT */
|
||||
|
||||
#qcom,sensors = <8>;
|
||||
#thermal-sensor-cells = <1>;
|
||||
|
|
@ -889,7 +1041,7 @@
|
|||
|
||||
blsp2_i2c5: i2c@c1ba000 {
|
||||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
reg = <0x0c175000 0x600>;
|
||||
reg = <0x0c1ba000 0x600>;
|
||||
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
|
||||
|
|
@ -983,6 +1135,75 @@
|
|||
redistributor-stride = <0x0 0x20000>;
|
||||
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
ufshc: ufshc@1da4000 {
|
||||
compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
|
||||
reg = <0x01da4000 0x2500>;
|
||||
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&ufsphy_lanes>;
|
||||
phy-names = "ufsphy";
|
||||
lanes-per-direction = <2>;
|
||||
power-domains = <&gcc UFS_GDSC>;
|
||||
#reset-cells = <1>;
|
||||
|
||||
clock-names =
|
||||
"core_clk",
|
||||
"bus_aggr_clk",
|
||||
"iface_clk",
|
||||
"core_clk_unipro",
|
||||
"ref_clk",
|
||||
"tx_lane0_sync_clk",
|
||||
"rx_lane0_sync_clk",
|
||||
"rx_lane1_sync_clk";
|
||||
clocks =
|
||||
<&gcc GCC_UFS_AXI_CLK>,
|
||||
<&gcc GCC_AGGRE1_UFS_AXI_CLK>,
|
||||
<&gcc GCC_UFS_AHB_CLK>,
|
||||
<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
|
||||
<&rpmcc RPM_SMD_LN_BB_CLK1>,
|
||||
<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
|
||||
<&gcc GCC_UFS_RX_SYMBOL_0_CLK>,
|
||||
<&gcc GCC_UFS_RX_SYMBOL_1_CLK>;
|
||||
freq-table-hz =
|
||||
<50000000 200000000>,
|
||||
<0 0>,
|
||||
<0 0>,
|
||||
<37500000 150000000>,
|
||||
<0 0>,
|
||||
<0 0>,
|
||||
<0 0>,
|
||||
<0 0>;
|
||||
|
||||
resets = <&gcc GCC_UFS_BCR>;
|
||||
reset-names = "rst";
|
||||
};
|
||||
|
||||
ufsphy: phy@1da7000 {
|
||||
compatible = "qcom,msm8998-qmp-ufs-phy";
|
||||
reg = <0x01da7000 0x18c>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
clock-names =
|
||||
"ref",
|
||||
"ref_aux";
|
||||
clocks =
|
||||
<&gcc GCC_UFS_CLKREF_CLK>,
|
||||
<&gcc GCC_UFS_PHY_AUX_CLK>;
|
||||
|
||||
reset-names = "ufsphy";
|
||||
resets = <&ufshc 0>;
|
||||
|
||||
ufsphy_lanes: lanes@1da7400 {
|
||||
reg = <0x01da7400 0x128>,
|
||||
<0x01da7600 0x1fc>,
|
||||
<0x01da7c00 0x1dc>,
|
||||
<0x01da7800 0x128>,
|
||||
<0x01da7a00 0x1fc>;
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@
|
|||
compatible = "qcom,pm8005-gpio", "qcom,spmi-gpio";
|
||||
reg = <0xc000>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pm8005_gpio 0 0 4>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
|
|
|||
|
|
@ -93,6 +93,7 @@
|
|||
compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
|
||||
reg = <0xc000>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pm8998_gpio 0 0 26>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
|
|
|||
|
|
@ -14,6 +14,7 @@
|
|||
compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio";
|
||||
reg = <0xc000>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pmi8994_gpios 0 0 10>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
|
|
|||
|
|
@ -13,6 +13,7 @@
|
|||
compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
|
||||
reg = <0xc000>;
|
||||
gpio-controller;
|
||||
gpio-ranges = <&pmi8998_gpio 0 0 14>;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
|
|
|||
|
|
@ -131,4 +131,15 @@
|
|||
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
|
||||
};
|
||||
};
|
||||
|
||||
pms405_1: pms405@1 {
|
||||
compatible = "qcom,spmi-pmic";
|
||||
reg = <0x1 SPMI_USID>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
pms405_spmi_regulators: regulators {
|
||||
compatible = "qcom,pms405-regulators";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -7,5 +7,6 @@
|
|||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
|
||||
compatible = "qcom,qcs404-evb";
|
||||
compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb",
|
||||
"qcom,qcs404";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -3,9 +3,92 @@
|
|||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "qcs404-evb.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. QCS404 EVB 4000";
|
||||
compatible = "qcom,qcs404-evb";
|
||||
compatible = "qcom,qcs404-evb-4000", "qcom,qcs404-evb",
|
||||
"qcom,qcs404";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
status = "ok";
|
||||
|
||||
snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 10000>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ðernet_defaults>;
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "rgmii";
|
||||
mdio {
|
||||
#address-cells = <0x1>;
|
||||
#size-cells = <0x0>;
|
||||
compatible = "snps,dwmac-mdio";
|
||||
phy1: phy@4 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
device_type = "ethernet-phy";
|
||||
reg = <0x4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
ethernet_defaults: ethernet-defaults {
|
||||
int {
|
||||
pins = "gpio61";
|
||||
function = "rgmii_int";
|
||||
bias-disable;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
mdc {
|
||||
pins = "gpio76";
|
||||
function = "rgmii_mdc";
|
||||
bias-pull-up;
|
||||
};
|
||||
mdio {
|
||||
pins = "gpio75";
|
||||
function = "rgmii_mdio";
|
||||
bias-pull-up;
|
||||
};
|
||||
tx {
|
||||
pins = "gpio67", "gpio66", "gpio65", "gpio64";
|
||||
function = "rgmii_tx";
|
||||
bias-pull-up;
|
||||
drive-strength = <16>;
|
||||
};
|
||||
rx {
|
||||
pins = "gpio73", "gpio72", "gpio71", "gpio70";
|
||||
function = "rgmii_rx";
|
||||
bias-disable;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
tx-ctl {
|
||||
pins = "gpio68";
|
||||
function = "rgmii_ctl";
|
||||
bias-pull-up;
|
||||
drive-strength = <16>;
|
||||
};
|
||||
rx-ctl {
|
||||
pins = "gpio74";
|
||||
function = "rgmii_ctl";
|
||||
bias-disable;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
tx-ck {
|
||||
pins = "gpio63";
|
||||
function = "rgmii_ck";
|
||||
bias-pull-up;
|
||||
drive-strength = <16>;
|
||||
};
|
||||
rx-ck {
|
||||
pins = "gpio69";
|
||||
function = "rgmii_ck";
|
||||
bias-disable;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -7,6 +7,7 @@
|
|||
/ {
|
||||
aliases {
|
||||
serial0 = &blsp1_uart2;
|
||||
serial1 = &blsp1_uart3;
|
||||
};
|
||||
|
||||
chosen {
|
||||
|
|
@ -19,6 +20,52 @@
|
|||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_ch0_3p3:
|
||||
vdd_esmps3_3p3: vdd-esmps3-3p3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "eSMPS3_3P3";
|
||||
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart3 {
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "qcom,wcn3990-bt";
|
||||
vddio-supply = <&vreg_l6_1p8>;
|
||||
vddxo-supply = <&vreg_l5_1p8>;
|
||||
vddrf-supply = <&vreg_l1_1p3>;
|
||||
vddch0-supply = <&vdd_ch0_3p3>;
|
||||
|
||||
local-bd-address = [ 02 00 00 00 5a ad ];
|
||||
|
||||
max-speed = <3200000>;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_dma {
|
||||
qcom,controlled-remotely;
|
||||
};
|
||||
|
||||
&blsp2_dma {
|
||||
qcom,controlled-remotely;
|
||||
};
|
||||
|
||||
&pms405_spmi_regulators {
|
||||
vdd_s3-supply = <&pms405_s3>;
|
||||
|
||||
pms405_s3: s3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd_apc";
|
||||
regulator-min-microvolt = <1048000>;
|
||||
regulator-max-microvolt = <1352000>;
|
||||
};
|
||||
};
|
||||
|
||||
&remoteproc_adsp {
|
||||
|
|
@ -37,18 +84,18 @@
|
|||
pms405-regulators {
|
||||
compatible = "qcom,rpm-pms405-regulators";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-l1-l2-supply = <&vreg_s5_1p35>;
|
||||
vdd-l3-l8-supply = <&vreg_s5_1p35>;
|
||||
vdd-l4-supply = <&vreg_s5_1p35>;
|
||||
vdd-l5-l6-supply = <&vreg_s4_1p8>;
|
||||
vdd-l7-supply = <&vph_pwr>;
|
||||
vdd-l9-supply = <&vreg_s5_1p35>;
|
||||
vdd-l10-l11-l12-l13-supply = <&vph_pwr>;
|
||||
vdd_s1-supply = <&vph_pwr>;
|
||||
vdd_s2-supply = <&vph_pwr>;
|
||||
vdd_s3-supply = <&vph_pwr>;
|
||||
vdd_s4-supply = <&vph_pwr>;
|
||||
vdd_s5-supply = <&vph_pwr>;
|
||||
vdd_l1_l2-supply = <&vreg_s5_1p35>;
|
||||
vdd_l3_l8-supply = <&vreg_s5_1p35>;
|
||||
vdd_l4-supply = <&vreg_s5_1p35>;
|
||||
vdd_l5_l6-supply = <&vreg_s4_1p8>;
|
||||
vdd_l7-supply = <&vph_pwr>;
|
||||
vdd_l9-supply = <&vreg_s5_1p35>;
|
||||
vdd_l10_l11_l12_l13-supply = <&vph_pwr>;
|
||||
|
||||
vreg_s4_1p8: s4 {
|
||||
regulator-min-microvolt = <1728000>;
|
||||
|
|
@ -56,8 +103,8 @@
|
|||
};
|
||||
|
||||
vreg_s5_1p35: s5 {
|
||||
regulator-min-microvolt = <>;
|
||||
regulator-max-microvolt = <>;
|
||||
regulator-min-microvolt = <1352000>;
|
||||
regulator-max-microvolt = <1352000>;
|
||||
};
|
||||
|
||||
vreg_l1_1p3: l1 {
|
||||
|
|
@ -71,7 +118,7 @@
|
|||
};
|
||||
|
||||
vreg_l3_1p05: l3 {
|
||||
regulator-min-microvolt = <976000>;
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1160000>;
|
||||
};
|
||||
|
||||
|
|
@ -205,3 +252,21 @@
|
|||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart3_default {
|
||||
cts {
|
||||
pins = "gpio84";
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
rts-tx {
|
||||
pins = "gpio85", "gpio82";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
rx {
|
||||
pins = "gpio83";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -435,7 +435,6 @@
|
|||
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
|
||||
clock-names = "bam_clk";
|
||||
#dma-cells = <1>;
|
||||
qcom,controlled-remotely = <1>;
|
||||
qcom,ee = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -479,6 +478,27 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
ethernet: ethernet@7a80000 {
|
||||
compatible = "qcom,qcs404-ethqos";
|
||||
reg = <0x07a80000 0x10000>,
|
||||
<0x07a96000 0x100>;
|
||||
reg-names = "stmmaceth", "rgmii";
|
||||
clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
|
||||
clocks = <&gcc GCC_ETH_AXI_CLK>,
|
||||
<&gcc GCC_ETH_SLAVE_AHB_CLK>,
|
||||
<&gcc GCC_ETH_PTP_CLK>,
|
||||
<&gcc GCC_ETH_RGMII_CLK>;
|
||||
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "macirq", "eth_lpi";
|
||||
|
||||
snps,tso;
|
||||
rx-fifo-depth = <4096>;
|
||||
tx-fifo-depth = <4096>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
wifi: wifi@a000000 {
|
||||
compatible = "qcom,wcn3990-wifi";
|
||||
reg = <0xa000000 0x800000>;
|
||||
|
|
@ -659,7 +679,6 @@
|
|||
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
|
||||
clock-names = "bam_clk";
|
||||
#dma-cells = <1>;
|
||||
qcom,controlled-remotely = <1>;
|
||||
qcom,ee = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -48,6 +48,10 @@
|
|||
};
|
||||
};
|
||||
|
||||
&adsp_pas {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
pm8998-rpmh-regulators {
|
||||
compatible = "qcom,pm8998-rpmh-regulators";
|
||||
|
|
@ -344,6 +348,10 @@
|
|||
};
|
||||
};
|
||||
|
||||
&cdsp_pas {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gcc {
|
||||
protected-clocks = <GCC_QSPI_CORE_CLK>,
|
||||
<GCC_QSPI_CORE_CLK_SRC>,
|
||||
|
|
|
|||
|
|
@ -11,8 +11,10 @@
|
|||
#include <dt-bindings/clock/qcom,lpass-sdm845.h>
|
||||
#include <dt-bindings/clock/qcom,rpmh.h>
|
||||
#include <dt-bindings/clock/qcom,videocc-sdm845.h>
|
||||
#include <dt-bindings/interconnect/qcom,sdm845.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/phy/phy-qcom-qusb2.h>
|
||||
#include <dt-bindings/power/qcom-rpmpd.h>
|
||||
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
|
||||
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
|
||||
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
|
||||
|
|
@ -73,29 +75,78 @@
|
|||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
memory@85fc0000 {
|
||||
hyp_mem: memory@85700000 {
|
||||
reg = <0 0x85700000 0 0x600000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
xbl_mem: memory@85e00000 {
|
||||
reg = <0 0x85e00000 0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
aop_mem: memory@85fc0000 {
|
||||
reg = <0 0x85fc0000 0 0x20000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
memory@85fe0000 {
|
||||
aop_cmd_db_mem: memory@85fe0000 {
|
||||
compatible = "qcom,cmd-db";
|
||||
reg = <0x0 0x85fe0000 0x0 0x20000>;
|
||||
reg = <0x0 0x85fe0000 0 0x20000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
smem_mem: memory@86000000 {
|
||||
reg = <0x0 0x86000000 0x0 0x200000>;
|
||||
reg = <0x0 0x86000000 0 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
memory@86200000 {
|
||||
tz_mem: memory@86200000 {
|
||||
reg = <0 0x86200000 0 0x2d00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wlan_msa_mem: memory@96700000 {
|
||||
reg = <0 0x96700000 0 0x100000>;
|
||||
rmtfs_mem: memory@88f00000 {
|
||||
compatible = "qcom,rmtfs-mem";
|
||||
reg = <0 0x88f00000 0 0x200000>;
|
||||
no-map;
|
||||
|
||||
qcom,client-id = <1>;
|
||||
qcom,vmid = <15>;
|
||||
};
|
||||
|
||||
qseecom_mem: memory@8ab00000 {
|
||||
reg = <0 0x8ab00000 0 0x1400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
camera_mem: memory@8bf00000 {
|
||||
reg = <0 0x8bf00000 0 0x500000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ipa_fw_mem: memory@8c400000 {
|
||||
reg = <0 0x8c400000 0 0x10000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ipa_gsi_mem: memory@8c410000 {
|
||||
reg = <0 0x8c410000 0 0x5000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
gpu_mem: memory@8c415000 {
|
||||
reg = <0 0x8c415000 0 0x2000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
adsp_mem: memory@8c500000 {
|
||||
reg = <0 0x8c500000 0 0x1a00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wlan_msa_mem: memory@8df00000 {
|
||||
reg = <0 0x8df00000 0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
|
|
@ -104,10 +155,30 @@
|
|||
no-map;
|
||||
};
|
||||
|
||||
venus_mem: memory@95800000 {
|
||||
reg = <0 0x95800000 0 0x500000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
cdsp_mem: memory@95d00000 {
|
||||
reg = <0 0x95d00000 0 0x800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mba_region: memory@96500000 {
|
||||
reg = <0 0x96500000 0 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
slpi_mem: memory@96700000 {
|
||||
reg = <0 0x96700000 0 0x1400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
spss_mem: memory@97b00000 {
|
||||
reg = <0 0x97b00000 0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
cpus {
|
||||
|
|
@ -264,6 +335,64 @@
|
|||
};
|
||||
};
|
||||
|
||||
adsp_pas: remoteproc-adsp {
|
||||
compatible = "qcom,sdm845-adsp-pas";
|
||||
|
||||
interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
|
||||
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
||||
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
|
||||
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
|
||||
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "wdog", "fatal", "ready",
|
||||
"handover", "stop-ack";
|
||||
|
||||
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
||||
clock-names = "xo";
|
||||
|
||||
memory-region = <&adsp_mem>;
|
||||
|
||||
qcom,smem-states = <&adsp_smp2p_out 0>;
|
||||
qcom,smem-state-names = "stop";
|
||||
|
||||
status = "disabled";
|
||||
|
||||
glink-edge {
|
||||
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
|
||||
label = "lpass";
|
||||
qcom,remote-pid = <2>;
|
||||
mboxes = <&apss_shared 8>;
|
||||
};
|
||||
};
|
||||
|
||||
cdsp_pas: remoteproc-cdsp {
|
||||
compatible = "qcom,sdm845-cdsp-pas";
|
||||
|
||||
interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
|
||||
<&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
||||
<&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
|
||||
<&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
|
||||
<&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "wdog", "fatal", "ready",
|
||||
"handover", "stop-ack";
|
||||
|
||||
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
||||
clock-names = "xo";
|
||||
|
||||
memory-region = <&cdsp_mem>;
|
||||
|
||||
qcom,smem-states = <&cdsp_smp2p_out 0>;
|
||||
qcom,smem-state-names = "stop";
|
||||
|
||||
status = "disabled";
|
||||
|
||||
glink-edge {
|
||||
interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
|
||||
label = "turing";
|
||||
qcom,remote-pid = <5>;
|
||||
mboxes = <&apss_shared 4>;
|
||||
};
|
||||
};
|
||||
|
||||
tcsr_mutex: hwlock {
|
||||
compatible = "qcom,tcsr-mutex";
|
||||
syscon = <&tcsr_mutex_regs 0 0x1000>;
|
||||
|
|
@ -1033,6 +1162,7 @@
|
|||
phy-names = "ufsphy";
|
||||
lanes-per-direction = <2>;
|
||||
power-domains = <&gcc UFS_PHY_GDSC>;
|
||||
#reset-cells = <1>;
|
||||
|
||||
iommus = <&apps_smmu 0x100 0xf>;
|
||||
|
||||
|
|
@ -1078,6 +1208,8 @@
|
|||
clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
|
||||
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
|
||||
|
||||
resets = <&ufs_mem_hc 0>;
|
||||
reset-names = "ufsphy";
|
||||
status = "disabled";
|
||||
|
||||
ufs_mem_phy_lanes: lanes@1d87400 {
|
||||
|
|
@ -2098,43 +2230,43 @@
|
|||
compatible = "operating-points-v2";
|
||||
|
||||
rpmhpd_opp_ret: opp1 {
|
||||
opp-level = <16>;
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_min_svs: opp2 {
|
||||
opp-level = <48>;
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_low_svs: opp3 {
|
||||
opp-level = <64>;
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_svs: opp4 {
|
||||
opp-level = <128>;
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_svs_l1: opp5 {
|
||||
opp-level = <192>;
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_nom: opp6 {
|
||||
opp-level = <256>;
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_nom_l1: opp7 {
|
||||
opp-level = <320>;
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_nom_l2: opp8 {
|
||||
opp-level = <336>;
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_turbo: opp9 {
|
||||
opp-level = <384>;
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
|
||||
};
|
||||
|
||||
rpmhpd_opp_turbo_l1: opp10 {
|
||||
opp-level = <416>;
|
||||
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -2611,5 +2743,210 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
aoss0-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 0>;
|
||||
|
||||
trips {
|
||||
aoss0_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cluster0-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 5>;
|
||||
|
||||
trips {
|
||||
cluster0_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
cluster0_crit: cluster0_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
cluster1-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 6>;
|
||||
|
||||
trips {
|
||||
cluster1_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
cluster1_crit: cluster1_crit {
|
||||
temperature = <110000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpu-thermal-top {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 11>;
|
||||
|
||||
trips {
|
||||
gpu1_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpu-thermal-bottom {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens0 12>;
|
||||
|
||||
trips {
|
||||
gpu2_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
aoss1-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 0>;
|
||||
|
||||
trips {
|
||||
aoss1_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
q6-modem-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 1>;
|
||||
|
||||
trips {
|
||||
q6_modem_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mem-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 2>;
|
||||
|
||||
trips {
|
||||
mem_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
wlan-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 3>;
|
||||
|
||||
trips {
|
||||
wlan_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
q6-hvx-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 4>;
|
||||
|
||||
trips {
|
||||
q6_hvx_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
camera-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 5>;
|
||||
|
||||
trips {
|
||||
camera_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
video-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 6>;
|
||||
|
||||
trips {
|
||||
video_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
modem-thermal {
|
||||
polling-delay-passive = <250>;
|
||||
polling-delay = <1000>;
|
||||
|
||||
thermal-sensors = <&tsens1 7>;
|
||||
|
||||
trips {
|
||||
modem_alert0: trip-point@0 {
|
||||
temperature = <90000>;
|
||||
hysteresis = <2000>;
|
||||
type = "hot";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче