Sparx5 DT updates for Linux 5.10
- Add public repo to MAINTAINERS - Add SPI controller and devices - Add eMMC controller and devices - Add temperature sensor -----BEGIN PGP SIGNATURE----- iJEEABYIADkWIQQaBzOicklHovJvajA3MaYaSgcc9AUCX2HdrxscbGFycy5wb3Zs c2VuQG1pY3JvY2hpcC5jb20ACgkQNzGmGkoHHPSyFgD8CeApRk+Nft2RMt72TyLW A/sGGCdqnhQqp7Sswpf625wA/idFqzcEfwQNVar29MBJ3A6Uu213DK4b/lnkw9cm Mg4E =Ln9n -----END PGP SIGNATURE----- Merge tag 'sparx5-dt-5.10' of https://github.com/microchip-ung/linux-upstream into arm/dt Sparx5 DT updates for Linux 5.10 - Add public repo to MAINTAINERS - Add SPI controller and devices - Add eMMC controller and devices - Add temperature sensor * tag 'sparx5-dt-5.10' of https://github.com/microchip-ung/linux-upstream: arm64: dts: sparx5: Add spi-nand devices arm64: dts: sparx5: Add spi-nor support arm64: dts: sparx5: Add SPI controller and associated mmio-mux MAINTAINERS: Add git tree for Sparx5 arm64: dts: sparx5: Add hwmon temperature sensor arm64: dts: sparx5: Add Sparx5 eMMC support Link: https://lore.kernel.org/r/878sda2dj0.fsf@microchip.com Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson
Коммит
38c419037a
|
|
@ -2136,6 +2136,7 @@ M: Steen Hegelund <Steen.Hegelund@microchip.com>
|
|||
M: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Supported
|
||||
T: git git://github.com/microchip-ung/linux-upstream.git
|
||||
F: arch/arm64/boot/dts/microchip/
|
||||
N: sparx5
|
||||
|
||||
|
|
|
|||
|
|
@ -5,6 +5,7 @@
|
|||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/microchip,sparx5.h>
|
||||
|
||||
/ {
|
||||
compatible = "microchip,sparx5";
|
||||
|
|
@ -13,6 +14,7 @@
|
|||
#size-cells = <1>;
|
||||
|
||||
aliases {
|
||||
spi0 = &spi0;
|
||||
serial0 = &uart0;
|
||||
serial1 = &uart1;
|
||||
};
|
||||
|
|
@ -117,6 +119,22 @@
|
|||
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
cpu_ctrl: syscon@600000000 {
|
||||
compatible = "microchip,sparx5-cpu-syscon", "syscon",
|
||||
"simple-mfd";
|
||||
reg = <0x6 0x00000000 0xd0>;
|
||||
mux: mux-controller {
|
||||
compatible = "mmio-mux";
|
||||
#mux-control-cells = <0>;
|
||||
/*
|
||||
* SI_OWNER and SI2_OWNER in GENERAL_CTRL
|
||||
* SPI: value 9 - (SIMC,SIBM) = 0b1001
|
||||
* SPI2: value 6 - (SIBM,SIMC) = 0b0110
|
||||
*/
|
||||
mux-reg-masks = <0x88 0xf0>;
|
||||
};
|
||||
};
|
||||
|
||||
uart0: serial@600100000 {
|
||||
pinctrl-0 = <&uart_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
|
@ -143,6 +161,19 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
spi0: spi@600104000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "microchip,sparx5-spi";
|
||||
reg = <0x6 0x00104000 0x40>;
|
||||
num-cs = <16>;
|
||||
reg-io-width = <4>;
|
||||
reg-shift = <2>;
|
||||
clocks = <&ahb_clk>;
|
||||
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer1: timer@600105000 {
|
||||
compatible = "snps,dw-apb-timer";
|
||||
reg = <0x6 0x00105000 0x1000>;
|
||||
|
|
@ -151,6 +182,20 @@
|
|||
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
sdhci0: mmc@600800000 {
|
||||
compatible = "microchip,dw-sparx5-sdhci";
|
||||
status = "disabled";
|
||||
reg = <0x6 0x00800000 0x1000>;
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&clks CLK_ID_AUX1>;
|
||||
clock-names = "core";
|
||||
assigned-clocks = <&clks CLK_ID_AUX1>;
|
||||
assigned-clock-rates = <800000000>;
|
||||
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
|
||||
gpio: pinctrl@6110101e0 {
|
||||
compatible = "microchip,sparx5-pinctrl";
|
||||
reg = <0x6 0x110101e0 0x90>, <0x6 0x10508010 0x100>;
|
||||
|
|
@ -161,6 +206,26 @@
|
|||
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
cs1_pins: cs1-pins {
|
||||
pins = "GPIO_16";
|
||||
function = "si";
|
||||
};
|
||||
|
||||
cs2_pins: cs2-pins {
|
||||
pins = "GPIO_17";
|
||||
function = "si";
|
||||
};
|
||||
|
||||
cs3_pins: cs3-pins {
|
||||
pins = "GPIO_18";
|
||||
function = "si";
|
||||
};
|
||||
|
||||
si2_pins: si2-pins {
|
||||
pins = "GPIO_39", "GPIO_40", "GPIO_41";
|
||||
function = "si2";
|
||||
};
|
||||
|
||||
uart_pins: uart-pins {
|
||||
pins = "GPIO_10", "GPIO_11";
|
||||
function = "uart";
|
||||
|
|
@ -180,6 +245,15 @@
|
|||
pins = "GPIO_28", "GPIO_29";
|
||||
function = "twi2";
|
||||
};
|
||||
|
||||
emmc_pins: emmc-pins {
|
||||
pins = "GPIO_34", "GPIO_35", "GPIO_36",
|
||||
"GPIO_37", "GPIO_38", "GPIO_39",
|
||||
"GPIO_40", "GPIO_41", "GPIO_42",
|
||||
"GPIO_43", "GPIO_44", "GPIO_45",
|
||||
"GPIO_46", "GPIO_47";
|
||||
function = "emmc";
|
||||
};
|
||||
};
|
||||
|
||||
i2c0: i2c@600101000 {
|
||||
|
|
@ -209,5 +283,12 @@
|
|||
clock-frequency = <100000>;
|
||||
clocks = <&ahb_clk>;
|
||||
};
|
||||
|
||||
tmon0: tmon@610508110 {
|
||||
compatible = "microchip,sparx5-temp";
|
||||
reg = <0x6 0x10508110 0xc>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
clocks = <&ahb_clk>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,31 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
|
||||
*/
|
||||
|
||||
&gpio {
|
||||
cs14_pins: cs14-pins {
|
||||
pins = "GPIO_44";
|
||||
function = "si";
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-0 = <&si2_pins>;
|
||||
pinctrl-names = "default";
|
||||
spi@e {
|
||||
compatible = "spi-mux";
|
||||
mux-controls = <&mux>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <14>; /* CS14 */
|
||||
spi-flash@6 {
|
||||
compatible = "spi-nand";
|
||||
pinctrl-0 = <&cs14_pins>;
|
||||
pinctrl-names = "default";
|
||||
reg = <0x6>; /* SPI2 */
|
||||
spi-max-frequency = <42000000>;
|
||||
rx-sample-delay-ns = <7>; /* Tune for speed */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -16,6 +16,59 @@
|
|||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
emmc_pins: emmc-pins {
|
||||
/* NB: No "GPIO_35", "GPIO_36", "GPIO_37"
|
||||
* (N/A: CARD_nDETECT, CARD_WP, CARD_LED)
|
||||
*/
|
||||
pins = "GPIO_34", "GPIO_38", "GPIO_39",
|
||||
"GPIO_40", "GPIO_41", "GPIO_42",
|
||||
"GPIO_43", "GPIO_44", "GPIO_45",
|
||||
"GPIO_46", "GPIO_47";
|
||||
drive-strength = <3>;
|
||||
function = "emmc";
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci0 {
|
||||
status = "okay";
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
max-frequency = <8000000>;
|
||||
microchip,clock-delay = <10>;
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
spi@0 {
|
||||
compatible = "spi-mux";
|
||||
mux-controls = <&mux>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>; /* CS0 */
|
||||
spi-flash@9 {
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <8000000>;
|
||||
reg = <0x9>; /* SPI */
|
||||
};
|
||||
};
|
||||
spi@1 {
|
||||
compatible = "spi-mux";
|
||||
mux-controls = <&mux 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <1>; /* CS1 */
|
||||
spi-flash@9 {
|
||||
compatible = "spi-nand";
|
||||
pinctrl-0 = <&cs1_pins>;
|
||||
pinctrl-names = "default";
|
||||
spi-max-frequency = <8000000>;
|
||||
reg = <0x9>; /* SPI */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -5,6 +5,7 @@
|
|||
|
||||
/dts-v1/;
|
||||
#include "sparx5_pcb134_board.dtsi"
|
||||
#include "sparx5_nand.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sparx5 PCB134 Reference Board (NAND)";
|
||||
|
|
|
|||
|
|
@ -38,6 +38,38 @@
|
|||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
spi@0 {
|
||||
compatible = "spi-mux";
|
||||
mux-controls = <&mux>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>; /* CS0 */
|
||||
spi-flash@9 {
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <8000000>;
|
||||
reg = <0x9>; /* SPI */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
spi@0 {
|
||||
compatible = "spi-mux";
|
||||
mux-controls = <&mux>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>; /* CS0 */
|
||||
spi-flash@9 {
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <8000000>;
|
||||
reg = <0x9>; /* SPI */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
i2cmux_pins_i: i2cmux-pins-i {
|
||||
pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19",
|
||||
|
|
|
|||
|
|
@ -15,3 +15,26 @@
|
|||
reg = <0x00000000 0x00000000 0x10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
emmc_pins: emmc-pins {
|
||||
/* NB: No "GPIO_35", "GPIO_36", "GPIO_37"
|
||||
* (N/A: CARD_nDETECT, CARD_WP, CARD_LED)
|
||||
*/
|
||||
pins = "GPIO_34", "GPIO_38", "GPIO_39",
|
||||
"GPIO_40", "GPIO_41", "GPIO_42",
|
||||
"GPIO_43", "GPIO_44", "GPIO_45",
|
||||
"GPIO_46", "GPIO_47";
|
||||
drive-strength = <3>;
|
||||
function = "emmc";
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
non-removable;
|
||||
max-frequency = <52000000>;
|
||||
bus-width = <8>;
|
||||
microchip,clock-delay = <10>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -5,6 +5,7 @@
|
|||
|
||||
/dts-v1/;
|
||||
#include "sparx5_pcb135_board.dtsi"
|
||||
#include "sparx5_nand.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sparx5 PCB135 Reference Board (NAND)";
|
||||
|
|
|
|||
|
|
@ -51,6 +51,38 @@
|
|||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
spi@0 {
|
||||
compatible = "spi-mux";
|
||||
mux-controls = <&mux>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>; /* CS0 */
|
||||
spi-flash@9 {
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <8000000>;
|
||||
reg = <0x9>; /* SPI */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
spi@0 {
|
||||
compatible = "spi-mux";
|
||||
mux-controls = <&mux>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>; /* CS0 */
|
||||
spi-flash@9 {
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <8000000>;
|
||||
reg = <0x9>; /* SPI */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&axi {
|
||||
i2c0_imux: i2c0-imux@0 {
|
||||
compatible = "i2c-mux-pinctrl";
|
||||
|
|
|
|||
|
|
@ -15,3 +15,26 @@
|
|||
reg = <0x00000000 0x00000000 0x10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
emmc_pins: emmc-pins {
|
||||
/* NB: No "GPIO_35", "GPIO_36", "GPIO_37"
|
||||
* (N/A: CARD_nDETECT, CARD_WP, CARD_LED)
|
||||
*/
|
||||
pins = "GPIO_34", "GPIO_38", "GPIO_39",
|
||||
"GPIO_40", "GPIO_41", "GPIO_42",
|
||||
"GPIO_43", "GPIO_44", "GPIO_45",
|
||||
"GPIO_46", "GPIO_47";
|
||||
drive-strength = <3>;
|
||||
function = "emmc";
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
non-removable;
|
||||
max-frequency = <52000000>;
|
||||
bus-width = <8>;
|
||||
microchip,clock-delay = <10>;
|
||||
};
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче