From 3943af9d01e94330d0cfac6fccdbc829aad50c92 Mon Sep 17 00:00:00 2001 From: Sergey Miroshnichenko Date: Tue, 12 Mar 2019 15:05:48 +0300 Subject: [PATCH] PCI: pciehp: Ignore Link State Changes after powering off a slot During a safe hot remove, the OS powers off the slot, which may cause a Data Link Layer State Changed event. The slot has already been set to OFF_STATE, so that event results in re-enabling the device, making it impossible to safely remove it. Clear out the Presence Detect Changed and Data Link Layer State Changed events when the disabled slot has settled down. It is still possible to re-enable the device if it remains in the slot after pressing the Attention Button by pressing it again. Fixes the problem that Micah reported below: an NVMe drive power button may not actually turn off the drive. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203237 Reported-by: Micah Parrish Tested-by: Micah Parrish Signed-off-by: Sergey Miroshnichenko [bhelgaas: changelog, add bugzilla URL] Signed-off-by: Bjorn Helgaas Reviewed-by: Lukas Wunner Cc: stable@vger.kernel.org # v4.19+ --- drivers/pci/hotplug/pciehp_ctrl.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 3f3df4c29f6e..905282a8ddaa 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -115,6 +115,10 @@ static void remove_board(struct controller *ctrl, bool safe_removal) * removed from the slot/adapter. */ msleep(1000); + + /* Ignore link or presence changes caused by power off */ + atomic_and(~(PCI_EXP_SLTSTA_DLLSC | PCI_EXP_SLTSTA_PDC), + &ctrl->pending_events); } /* turn off Green LED */