iio: Add Freescale mag3110 magnetometer driver
three-axis digital magnetometer with I2C interface datasheet is available from http://cache.freescale.com/files/sensors/doc/data_sheet/MAG3110.pdf Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
Peter Meerwald
Jonathan Cameron
Родитель
2ab61fa047
Коммит
39631b5f95
|
|
@ -16,6 +16,16 @@ config AK8975
|
|||
To compile this driver as a module, choose M here: the module
|
||||
will be called ak8975.
|
||||
|
||||
config MAG3110
|
||||
tristate "Freescale MAG3110 3-Axis Magnetometer"
|
||||
depends on I2C
|
||||
help
|
||||
Say yes here to build support for the Freescale MAG3110 3-Axis
|
||||
magnetometer.
|
||||
|
||||
To compile this driver as a module, choose M here: the module
|
||||
will be called mag3110.
|
||||
|
||||
config HID_SENSOR_MAGNETOMETER_3D
|
||||
depends on HID_SENSOR_HUB
|
||||
select IIO_BUFFER
|
||||
|
|
|
|||
|
|
@ -4,6 +4,7 @@
|
|||
|
||||
# When adding new entries keep the list in alphabetical order
|
||||
obj-$(CONFIG_AK8975) += ak8975.o
|
||||
obj-$(CONFIG_MAG3110) += mag3110.o
|
||||
obj-$(CONFIG_HID_SENSOR_MAGNETOMETER_3D) += hid-sensor-magn-3d.o
|
||||
|
||||
obj-$(CONFIG_IIO_ST_MAGN_3AXIS) += st_magn.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,401 @@
|
|||
/*
|
||||
* mag3110.c - Support for Freescale MAG3110 magnetometer sensor
|
||||
*
|
||||
* Copyright (c) 2013 Peter Meerwald <pmeerw@pmeerw.net>
|
||||
*
|
||||
* This file is subject to the terms and conditions of version 2 of
|
||||
* the GNU General Public License. See the file COPYING in the main
|
||||
* directory of this archive for more details.
|
||||
*
|
||||
* (7-bit I2C slave address 0x0e)
|
||||
*
|
||||
* TODO: irq, user offset, oversampling, continuous mode
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/sysfs.h>
|
||||
#include <linux/iio/trigger_consumer.h>
|
||||
#include <linux/iio/buffer.h>
|
||||
#include <linux/iio/triggered_buffer.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#define MAG3110_STATUS 0x00
|
||||
#define MAG3110_OUT_X 0x01 /* MSB first */
|
||||
#define MAG3110_OUT_Y 0x03
|
||||
#define MAG3110_OUT_Z 0x05
|
||||
#define MAG3110_WHO_AM_I 0x07
|
||||
#define MAG3110_OFF_X 0x09 /* MSB first */
|
||||
#define MAG3110_OFF_Y 0x0b
|
||||
#define MAG3110_OFF_Z 0x0d
|
||||
#define MAG3110_DIE_TEMP 0x0f
|
||||
#define MAG3110_CTRL_REG1 0x10
|
||||
#define MAG3110_CTRL_REG2 0x11
|
||||
|
||||
#define MAG3110_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0))
|
||||
|
||||
#define MAG3110_CTRL_DR_MASK (BIT(7) | BIT(6) | BIT(5))
|
||||
#define MAG3110_CTRL_DR_SHIFT 5
|
||||
#define MAG3110_CTRL_DR_DEFAULT 0
|
||||
|
||||
#define MAG3110_CTRL_TM BIT(1) /* trigger single measurement */
|
||||
#define MAG3110_CTRL_AC BIT(0) /* continuous measurements */
|
||||
|
||||
#define MAG3110_CTRL_AUTO_MRST_EN BIT(7) /* magnetic auto-reset */
|
||||
#define MAG3110_CTRL_RAW BIT(5) /* measurements not user-offset corrected */
|
||||
|
||||
#define MAG3110_DEVICE_ID 0xc4
|
||||
|
||||
/* Each client has this additional data */
|
||||
struct mag3110_data {
|
||||
struct i2c_client *client;
|
||||
struct mutex lock;
|
||||
u8 ctrl_reg1;
|
||||
};
|
||||
|
||||
static int mag3110_request(struct mag3110_data *data)
|
||||
{
|
||||
int ret, tries = 150;
|
||||
|
||||
/* trigger measurement */
|
||||
ret = i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
|
||||
data->ctrl_reg1 | MAG3110_CTRL_TM);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
while (tries-- > 0) {
|
||||
ret = i2c_smbus_read_byte_data(data->client, MAG3110_STATUS);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
/* wait for data ready */
|
||||
if ((ret & MAG3110_STATUS_DRDY) == MAG3110_STATUS_DRDY)
|
||||
break;
|
||||
msleep(20);
|
||||
}
|
||||
|
||||
if (tries < 0) {
|
||||
dev_err(&data->client->dev, "data not ready\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mag3110_read(struct mag3110_data *data, __be16 buf[3])
|
||||
{
|
||||
int ret;
|
||||
|
||||
mutex_lock(&data->lock);
|
||||
ret = mag3110_request(data);
|
||||
if (ret < 0) {
|
||||
mutex_unlock(&data->lock);
|
||||
return ret;
|
||||
}
|
||||
ret = i2c_smbus_read_i2c_block_data(data->client,
|
||||
MAG3110_OUT_X, 3 * sizeof(__be16), (u8 *) buf);
|
||||
mutex_unlock(&data->lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static ssize_t mag3110_show_int_plus_micros(char *buf,
|
||||
const int (*vals)[2], int n)
|
||||
{
|
||||
size_t len = 0;
|
||||
|
||||
while (n-- > 0)
|
||||
len += scnprintf(buf + len, PAGE_SIZE - len,
|
||||
"%d.%d ", vals[n][0], vals[n][1]);
|
||||
|
||||
/* replace trailing space by newline */
|
||||
buf[len - 1] = '\n';
|
||||
|
||||
return len;
|
||||
}
|
||||
|
||||
static int mag3110_get_int_plus_micros_index(const int (*vals)[2], int n,
|
||||
int val, int val2)
|
||||
{
|
||||
while (n-- > 0)
|
||||
if (val == vals[n][0] && val2 == vals[n][1])
|
||||
return n;
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static const int mag3110_samp_freq[8][2] = {
|
||||
{80, 0}, {40, 0}, {20, 0}, {10, 0}, {5, 0}, {2, 500000},
|
||||
{1, 250000}, {0, 625000}
|
||||
};
|
||||
|
||||
static ssize_t mag3110_show_samp_freq_avail(struct device *dev,
|
||||
struct device_attribute *attr, char *buf)
|
||||
{
|
||||
return mag3110_show_int_plus_micros(buf, mag3110_samp_freq, 8);
|
||||
}
|
||||
|
||||
static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(mag3110_show_samp_freq_avail);
|
||||
|
||||
static int mag3110_get_samp_freq_index(struct mag3110_data *data,
|
||||
int val, int val2)
|
||||
{
|
||||
return mag3110_get_int_plus_micros_index(mag3110_samp_freq, 8, val,
|
||||
val2);
|
||||
}
|
||||
|
||||
static int mag3110_read_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int *val, int *val2, long mask)
|
||||
{
|
||||
struct mag3110_data *data = iio_priv(indio_dev);
|
||||
__be16 buffer[3];
|
||||
int i, ret;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
switch (chan->type) {
|
||||
case IIO_MAGN: /* in 0.1 uT / LSB */
|
||||
ret = mag3110_read(data, buffer);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
*val = sign_extend32(
|
||||
be16_to_cpu(buffer[chan->scan_index]), 15);
|
||||
return IIO_VAL_INT;
|
||||
case IIO_TEMP: /* in 1 C / LSB */
|
||||
mutex_lock(&data->lock);
|
||||
ret = mag3110_request(data);
|
||||
if (ret < 0) {
|
||||
mutex_unlock(&data->lock);
|
||||
return ret;
|
||||
}
|
||||
ret = i2c_smbus_read_byte_data(data->client,
|
||||
MAG3110_DIE_TEMP);
|
||||
mutex_unlock(&data->lock);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
*val = sign_extend32(ret, 7);
|
||||
return IIO_VAL_INT;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
case IIO_CHAN_INFO_SCALE:
|
||||
*val = 0;
|
||||
*val2 = 1000;
|
||||
return IIO_VAL_INT_PLUS_MICRO;
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
i = data->ctrl_reg1 >> MAG3110_CTRL_DR_SHIFT;
|
||||
*val = mag3110_samp_freq[i][0];
|
||||
*val2 = mag3110_samp_freq[i][1];
|
||||
return IIO_VAL_INT_PLUS_MICRO;
|
||||
}
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int mag3110_write_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int val, int val2, long mask)
|
||||
{
|
||||
struct mag3110_data *data = iio_priv(indio_dev);
|
||||
int rate;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
rate = mag3110_get_samp_freq_index(data, val, val2);
|
||||
if (rate < 0)
|
||||
return -EINVAL;
|
||||
|
||||
data->ctrl_reg1 &= ~MAG3110_CTRL_DR_MASK;
|
||||
data->ctrl_reg1 |= rate << MAG3110_CTRL_DR_SHIFT;
|
||||
return i2c_smbus_write_byte_data(data->client,
|
||||
MAG3110_CTRL_REG1, data->ctrl_reg1);
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static irqreturn_t mag3110_trigger_handler(int irq, void *p)
|
||||
{
|
||||
struct iio_poll_func *pf = p;
|
||||
struct iio_dev *indio_dev = pf->indio_dev;
|
||||
struct mag3110_data *data = iio_priv(indio_dev);
|
||||
u8 buffer[16]; /* 3 16-bit channels + 1 byte temp + padding + ts */
|
||||
int ret;
|
||||
|
||||
ret = mag3110_read(data, (__be16 *) buffer);
|
||||
if (ret < 0)
|
||||
goto done;
|
||||
|
||||
if (test_bit(3, indio_dev->active_scan_mask)) {
|
||||
ret = i2c_smbus_read_byte_data(data->client,
|
||||
MAG3110_DIE_TEMP);
|
||||
if (ret < 0)
|
||||
goto done;
|
||||
buffer[6] = ret;
|
||||
}
|
||||
|
||||
iio_push_to_buffers_with_timestamp(indio_dev, buffer,
|
||||
iio_get_time_ns());
|
||||
|
||||
done:
|
||||
iio_trigger_notify_done(indio_dev->trig);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
#define MAG3110_CHANNEL(axis, idx) { \
|
||||
.type = IIO_MAGN, \
|
||||
.modified = 1, \
|
||||
.channel2 = IIO_MOD_##axis, \
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
||||
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
|
||||
BIT(IIO_CHAN_INFO_SCALE), \
|
||||
.scan_index = idx, \
|
||||
.scan_type = IIO_ST('s', 16, 16, IIO_BE), \
|
||||
}
|
||||
|
||||
static const struct iio_chan_spec mag3110_channels[] = {
|
||||
MAG3110_CHANNEL(X, 0),
|
||||
MAG3110_CHANNEL(Y, 1),
|
||||
MAG3110_CHANNEL(Z, 2),
|
||||
{
|
||||
.type = IIO_TEMP,
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
||||
.scan_index = 3,
|
||||
.scan_type = IIO_ST('s', 8, 8, 0),
|
||||
},
|
||||
IIO_CHAN_SOFT_TIMESTAMP(4),
|
||||
};
|
||||
|
||||
static struct attribute *mag3110_attributes[] = {
|
||||
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
static const struct attribute_group mag3110_group = {
|
||||
.attrs = mag3110_attributes,
|
||||
};
|
||||
|
||||
static const struct iio_info mag3110_info = {
|
||||
.attrs = &mag3110_group,
|
||||
.read_raw = &mag3110_read_raw,
|
||||
.write_raw = &mag3110_write_raw,
|
||||
.driver_module = THIS_MODULE,
|
||||
};
|
||||
|
||||
static const unsigned long mag3110_scan_masks[] = {0x7, 0xf, 0};
|
||||
|
||||
static int mag3110_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct mag3110_data *data;
|
||||
struct iio_dev *indio_dev;
|
||||
int ret;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(client, MAG3110_WHO_AM_I);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
if (ret != MAG3110_DEVICE_ID)
|
||||
return -ENODEV;
|
||||
|
||||
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
||||
if (!indio_dev)
|
||||
return -ENOMEM;
|
||||
|
||||
data = iio_priv(indio_dev);
|
||||
data->client = client;
|
||||
mutex_init(&data->lock);
|
||||
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
indio_dev->info = &mag3110_info;
|
||||
indio_dev->name = id->name;
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = mag3110_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(mag3110_channels);
|
||||
indio_dev->available_scan_masks = mag3110_scan_masks;
|
||||
|
||||
data->ctrl_reg1 = MAG3110_CTRL_DR_DEFAULT;
|
||||
ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG1,
|
||||
data->ctrl_reg1);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = i2c_smbus_write_byte_data(client, MAG3110_CTRL_REG2,
|
||||
MAG3110_CTRL_AUTO_MRST_EN | MAG3110_CTRL_RAW);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = iio_triggered_buffer_setup(indio_dev, NULL,
|
||||
mag3110_trigger_handler, NULL);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = iio_device_register(indio_dev);
|
||||
if (ret < 0)
|
||||
goto buffer_cleanup;
|
||||
return 0;
|
||||
|
||||
buffer_cleanup:
|
||||
iio_triggered_buffer_cleanup(indio_dev);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int mag3110_standby(struct mag3110_data *data)
|
||||
{
|
||||
return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
|
||||
data->ctrl_reg1 & ~MAG3110_CTRL_AC);
|
||||
}
|
||||
|
||||
static int mag3110_remove(struct i2c_client *client)
|
||||
{
|
||||
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
||||
|
||||
iio_device_unregister(indio_dev);
|
||||
iio_triggered_buffer_cleanup(indio_dev);
|
||||
mag3110_standby(iio_priv(indio_dev));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM_SLEEP
|
||||
static int mag3110_suspend(struct device *dev)
|
||||
{
|
||||
return mag3110_standby(iio_priv(i2c_get_clientdata(
|
||||
to_i2c_client(dev))));
|
||||
}
|
||||
|
||||
static int mag3110_resume(struct device *dev)
|
||||
{
|
||||
struct mag3110_data *data = iio_priv(i2c_get_clientdata(
|
||||
to_i2c_client(dev)));
|
||||
|
||||
return i2c_smbus_write_byte_data(data->client, MAG3110_CTRL_REG1,
|
||||
data->ctrl_reg1);
|
||||
}
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(mag3110_pm_ops, mag3110_suspend, mag3110_resume);
|
||||
#define MAG3110_PM_OPS (&mag3110_pm_ops)
|
||||
#else
|
||||
#define MAG3110_PM_OPS NULL
|
||||
#endif
|
||||
|
||||
static const struct i2c_device_id mag3110_id[] = {
|
||||
{ "mag3110", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, mag3110_id);
|
||||
|
||||
static struct i2c_driver mag3110_driver = {
|
||||
.driver = {
|
||||
.name = "mag3110",
|
||||
.pm = MAG3110_PM_OPS,
|
||||
},
|
||||
.probe = mag3110_probe,
|
||||
.remove = mag3110_remove,
|
||||
.id_table = mag3110_id,
|
||||
};
|
||||
module_i2c_driver(mag3110_driver);
|
||||
|
||||
MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
|
||||
MODULE_DESCRIPTION("Freescale MAG3110 magnetometer driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Загрузка…
Ссылка в новой задаче