mlxbf_gige: compute MDIO period based on i1clk
This patch adds logic to compute the MDIO period based on
the i1clk, and thereafter write the MDIO period into the YU
MDIO config register. The i1clk resource from the ACPI table
is used to provide addressing to YU bootrecord PLL registers.
The values in these registers are used to compute MDIO period.
If the i1clk resource is not present in the ACPI table, then
the current default hardcorded value of 430Mhz is used.
The i1clk clock value of 430MHz is only accurate for boards
with BF2 mid bin and main bin SoCs. The BF2 high bin SoCs
have i1clk = 500MHz, but can support a slower MDIO period.
Fixes: f92e1869d7 ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20220826155916.12491-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
David Thompson
Jakub Kicinski
Родитель
c0955bf957
Коммит
3a1a274e93
|
|
@ -75,6 +75,7 @@ struct mlxbf_gige {
|
|||
struct net_device *netdev;
|
||||
struct platform_device *pdev;
|
||||
void __iomem *mdio_io;
|
||||
void __iomem *clk_io;
|
||||
struct mii_bus *mdiobus;
|
||||
spinlock_t lock; /* for packet processing indices */
|
||||
u16 rx_q_entries;
|
||||
|
|
@ -137,7 +138,8 @@ enum mlxbf_gige_res {
|
|||
MLXBF_GIGE_RES_MDIO9,
|
||||
MLXBF_GIGE_RES_GPIO0,
|
||||
MLXBF_GIGE_RES_LLU,
|
||||
MLXBF_GIGE_RES_PLU
|
||||
MLXBF_GIGE_RES_PLU,
|
||||
MLXBF_GIGE_RES_CLK
|
||||
};
|
||||
|
||||
/* Version of register data returned by mlxbf_gige_get_regs() */
|
||||
|
|
|
|||
|
|
@ -22,10 +22,23 @@
|
|||
#include <linux/property.h>
|
||||
|
||||
#include "mlxbf_gige.h"
|
||||
#include "mlxbf_gige_regs.h"
|
||||
|
||||
#define MLXBF_GIGE_MDIO_GW_OFFSET 0x0
|
||||
#define MLXBF_GIGE_MDIO_CFG_OFFSET 0x4
|
||||
|
||||
#define MLXBF_GIGE_MDIO_FREQ_REFERENCE 156250000ULL
|
||||
#define MLXBF_GIGE_MDIO_COREPLL_CONST 16384ULL
|
||||
#define MLXBF_GIGE_MDC_CLK_NS 400
|
||||
#define MLXBF_GIGE_MDIO_PLL_I1CLK_REG1 0x4
|
||||
#define MLXBF_GIGE_MDIO_PLL_I1CLK_REG2 0x8
|
||||
#define MLXBF_GIGE_MDIO_CORE_F_SHIFT 0
|
||||
#define MLXBF_GIGE_MDIO_CORE_F_MASK GENMASK(25, 0)
|
||||
#define MLXBF_GIGE_MDIO_CORE_R_SHIFT 26
|
||||
#define MLXBF_GIGE_MDIO_CORE_R_MASK GENMASK(31, 26)
|
||||
#define MLXBF_GIGE_MDIO_CORE_OD_SHIFT 0
|
||||
#define MLXBF_GIGE_MDIO_CORE_OD_MASK GENMASK(3, 0)
|
||||
|
||||
/* Support clause 22 */
|
||||
#define MLXBF_GIGE_MDIO_CL22_ST1 0x1
|
||||
#define MLXBF_GIGE_MDIO_CL22_WRITE 0x1
|
||||
|
|
@ -50,28 +63,77 @@
|
|||
#define MLXBF_GIGE_MDIO_CFG_MDIO_IN_SAMP_MASK GENMASK(23, 16)
|
||||
#define MLXBF_GIGE_MDIO_CFG_MDIO_OUT_SAMP_MASK GENMASK(31, 24)
|
||||
|
||||
/* Formula for encoding the MDIO period. The encoded value is
|
||||
* passed to the MDIO config register.
|
||||
*
|
||||
* mdc_clk = 2*(val + 1)*i1clk
|
||||
*
|
||||
* 400 ns = 2*(val + 1)*(((1/430)*1000) ns)
|
||||
*
|
||||
* val = (((400 * 430 / 1000) / 2) - 1)
|
||||
*/
|
||||
#define MLXBF_GIGE_I1CLK_MHZ 430
|
||||
#define MLXBF_GIGE_MDC_CLK_NS 400
|
||||
|
||||
#define MLXBF_GIGE_MDIO_PERIOD (((MLXBF_GIGE_MDC_CLK_NS * MLXBF_GIGE_I1CLK_MHZ / 1000) / 2) - 1)
|
||||
|
||||
#define MLXBF_GIGE_MDIO_CFG_VAL (FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_MODE_MASK, 1) | \
|
||||
FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO3_3_MASK, 1) | \
|
||||
FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_FULL_DRIVE_MASK, 1) | \
|
||||
FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDC_PERIOD_MASK, \
|
||||
MLXBF_GIGE_MDIO_PERIOD) | \
|
||||
FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_IN_SAMP_MASK, 6) | \
|
||||
FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDIO_OUT_SAMP_MASK, 13))
|
||||
|
||||
#define MLXBF_GIGE_BF2_COREPLL_ADDR 0x02800c30
|
||||
#define MLXBF_GIGE_BF2_COREPLL_SIZE 0x0000000c
|
||||
|
||||
static struct resource corepll_params[] = {
|
||||
[MLXBF_GIGE_VERSION_BF2] = {
|
||||
.start = MLXBF_GIGE_BF2_COREPLL_ADDR,
|
||||
.end = MLXBF_GIGE_BF2_COREPLL_ADDR + MLXBF_GIGE_BF2_COREPLL_SIZE - 1,
|
||||
.name = "COREPLL_RES"
|
||||
},
|
||||
};
|
||||
|
||||
/* Returns core clock i1clk in Hz */
|
||||
static u64 calculate_i1clk(struct mlxbf_gige *priv)
|
||||
{
|
||||
u8 core_od, core_r;
|
||||
u64 freq_output;
|
||||
u32 reg1, reg2;
|
||||
u32 core_f;
|
||||
|
||||
reg1 = readl(priv->clk_io + MLXBF_GIGE_MDIO_PLL_I1CLK_REG1);
|
||||
reg2 = readl(priv->clk_io + MLXBF_GIGE_MDIO_PLL_I1CLK_REG2);
|
||||
|
||||
core_f = (reg1 & MLXBF_GIGE_MDIO_CORE_F_MASK) >>
|
||||
MLXBF_GIGE_MDIO_CORE_F_SHIFT;
|
||||
core_r = (reg1 & MLXBF_GIGE_MDIO_CORE_R_MASK) >>
|
||||
MLXBF_GIGE_MDIO_CORE_R_SHIFT;
|
||||
core_od = (reg2 & MLXBF_GIGE_MDIO_CORE_OD_MASK) >>
|
||||
MLXBF_GIGE_MDIO_CORE_OD_SHIFT;
|
||||
|
||||
/* Compute PLL output frequency as follow:
|
||||
*
|
||||
* CORE_F / 16384
|
||||
* freq_output = freq_reference * ----------------------------
|
||||
* (CORE_R + 1) * (CORE_OD + 1)
|
||||
*/
|
||||
freq_output = div_u64((MLXBF_GIGE_MDIO_FREQ_REFERENCE * core_f),
|
||||
MLXBF_GIGE_MDIO_COREPLL_CONST);
|
||||
freq_output = div_u64(freq_output, (core_r + 1) * (core_od + 1));
|
||||
|
||||
return freq_output;
|
||||
}
|
||||
|
||||
/* Formula for encoding the MDIO period. The encoded value is
|
||||
* passed to the MDIO config register.
|
||||
*
|
||||
* mdc_clk = 2*(val + 1)*(core clock in sec)
|
||||
*
|
||||
* i1clk is in Hz:
|
||||
* 400 ns = 2*(val + 1)*(1/i1clk)
|
||||
*
|
||||
* val = (((400/10^9) / (1/i1clk) / 2) - 1)
|
||||
* val = (400/2 * i1clk)/10^9 - 1
|
||||
*/
|
||||
static u8 mdio_period_map(struct mlxbf_gige *priv)
|
||||
{
|
||||
u8 mdio_period;
|
||||
u64 i1clk;
|
||||
|
||||
i1clk = calculate_i1clk(priv);
|
||||
|
||||
mdio_period = div_u64((MLXBF_GIGE_MDC_CLK_NS >> 1) * i1clk, 1000000000) - 1;
|
||||
|
||||
return mdio_period;
|
||||
}
|
||||
|
||||
static u32 mlxbf_gige_mdio_create_cmd(u16 data, int phy_add,
|
||||
int phy_reg, u32 opcode)
|
||||
{
|
||||
|
|
@ -124,9 +186,9 @@ static int mlxbf_gige_mdio_write(struct mii_bus *bus, int phy_add,
|
|||
int phy_reg, u16 val)
|
||||
{
|
||||
struct mlxbf_gige *priv = bus->priv;
|
||||
u32 temp;
|
||||
u32 cmd;
|
||||
int ret;
|
||||
u32 temp;
|
||||
|
||||
if (phy_reg & MII_ADDR_C45)
|
||||
return -EOPNOTSUPP;
|
||||
|
|
@ -144,18 +206,44 @@ static int mlxbf_gige_mdio_write(struct mii_bus *bus, int phy_add,
|
|||
return ret;
|
||||
}
|
||||
|
||||
static void mlxbf_gige_mdio_cfg(struct mlxbf_gige *priv)
|
||||
{
|
||||
u8 mdio_period;
|
||||
u32 val;
|
||||
|
||||
mdio_period = mdio_period_map(priv);
|
||||
|
||||
val = MLXBF_GIGE_MDIO_CFG_VAL;
|
||||
val |= FIELD_PREP(MLXBF_GIGE_MDIO_CFG_MDC_PERIOD_MASK, mdio_period);
|
||||
writel(val, priv->mdio_io + MLXBF_GIGE_MDIO_CFG_OFFSET);
|
||||
}
|
||||
|
||||
int mlxbf_gige_mdio_probe(struct platform_device *pdev, struct mlxbf_gige *priv)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct resource *res;
|
||||
int ret;
|
||||
|
||||
priv->mdio_io = devm_platform_ioremap_resource(pdev, MLXBF_GIGE_RES_MDIO9);
|
||||
if (IS_ERR(priv->mdio_io))
|
||||
return PTR_ERR(priv->mdio_io);
|
||||
|
||||
/* Configure mdio parameters */
|
||||
writel(MLXBF_GIGE_MDIO_CFG_VAL,
|
||||
priv->mdio_io + MLXBF_GIGE_MDIO_CFG_OFFSET);
|
||||
/* clk resource shared with other drivers so cannot use
|
||||
* devm_platform_ioremap_resource
|
||||
*/
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, MLXBF_GIGE_RES_CLK);
|
||||
if (!res) {
|
||||
/* For backward compatibility with older ACPI tables, also keep
|
||||
* CLK resource internal to the driver.
|
||||
*/
|
||||
res = &corepll_params[MLXBF_GIGE_VERSION_BF2];
|
||||
}
|
||||
|
||||
priv->clk_io = devm_ioremap(dev, res->start, resource_size(res));
|
||||
if (IS_ERR(priv->clk_io))
|
||||
return PTR_ERR(priv->clk_io);
|
||||
|
||||
mlxbf_gige_mdio_cfg(priv);
|
||||
|
||||
priv->mdiobus = devm_mdiobus_alloc(dev);
|
||||
if (!priv->mdiobus) {
|
||||
|
|
|
|||
|
|
@ -8,6 +8,8 @@
|
|||
#ifndef __MLXBF_GIGE_REGS_H__
|
||||
#define __MLXBF_GIGE_REGS_H__
|
||||
|
||||
#define MLXBF_GIGE_VERSION 0x0000
|
||||
#define MLXBF_GIGE_VERSION_BF2 0x0
|
||||
#define MLXBF_GIGE_STATUS 0x0010
|
||||
#define MLXBF_GIGE_STATUS_READY BIT(0)
|
||||
#define MLXBF_GIGE_INT_STATUS 0x0028
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче