MIPS: Netlogic: Platform NAND/NOR flash support

Changes to add support for the boot NOR flash on XLR boards and the
boot NAND/NOR flash drivers on the XLS boards.

Signed-off-by: Ganesan Ramalingam <ganesanr@netlogicmicro.com>
Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3758/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Ganesan Ramalingam 2012-07-24 17:28:54 +02:00 коммит произвёл Ralf Baechle
Родитель f35574a3ab
Коммит 3a2f9b9905
4 изменённых файлов: 380 добавлений и 1 удалений

Просмотреть файл

@ -0,0 +1,104 @@
/*
* Copyright (c) 2003-2012 Broadcom Corporation
* All Rights Reserved
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the Broadcom
* license below:
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _ASM_NLM_BRIDGE_H_
#define _ASM_NLM_BRIDGE_H_
#define BRIDGE_DRAM_0_BAR 0
#define BRIDGE_DRAM_1_BAR 1
#define BRIDGE_DRAM_2_BAR 2
#define BRIDGE_DRAM_3_BAR 3
#define BRIDGE_DRAM_4_BAR 4
#define BRIDGE_DRAM_5_BAR 5
#define BRIDGE_DRAM_6_BAR 6
#define BRIDGE_DRAM_7_BAR 7
#define BRIDGE_DRAM_CHN_0_MTR_0_BAR 8
#define BRIDGE_DRAM_CHN_0_MTR_1_BAR 9
#define BRIDGE_DRAM_CHN_0_MTR_2_BAR 10
#define BRIDGE_DRAM_CHN_0_MTR_3_BAR 11
#define BRIDGE_DRAM_CHN_0_MTR_4_BAR 12
#define BRIDGE_DRAM_CHN_0_MTR_5_BAR 13
#define BRIDGE_DRAM_CHN_0_MTR_6_BAR 14
#define BRIDGE_DRAM_CHN_0_MTR_7_BAR 15
#define BRIDGE_DRAM_CHN_1_MTR_0_BAR 16
#define BRIDGE_DRAM_CHN_1_MTR_1_BAR 17
#define BRIDGE_DRAM_CHN_1_MTR_2_BAR 18
#define BRIDGE_DRAM_CHN_1_MTR_3_BAR 19
#define BRIDGE_DRAM_CHN_1_MTR_4_BAR 20
#define BRIDGE_DRAM_CHN_1_MTR_5_BAR 21
#define BRIDGE_DRAM_CHN_1_MTR_6_BAR 22
#define BRIDGE_DRAM_CHN_1_MTR_7_BAR 23
#define BRIDGE_CFG_BAR 24
#define BRIDGE_PHNX_IO_BAR 25
#define BRIDGE_FLASH_BAR 26
#define BRIDGE_SRAM_BAR 27
#define BRIDGE_HTMEM_BAR 28
#define BRIDGE_HTINT_BAR 29
#define BRIDGE_HTPIC_BAR 30
#define BRIDGE_HTSM_BAR 31
#define BRIDGE_HTIO_BAR 32
#define BRIDGE_HTCFG_BAR 33
#define BRIDGE_PCIXCFG_BAR 34
#define BRIDGE_PCIXMEM_BAR 35
#define BRIDGE_PCIXIO_BAR 36
#define BRIDGE_DEVICE_MASK 37
#define BRIDGE_AERR_INTR_LOG1 38
#define BRIDGE_AERR_INTR_LOG2 39
#define BRIDGE_AERR_INTR_LOG3 40
#define BRIDGE_AERR_DEV_STAT 41
#define BRIDGE_AERR1_LOG1 42
#define BRIDGE_AERR1_LOG2 43
#define BRIDGE_AERR1_LOG3 44
#define BRIDGE_AERR1_DEV_STAT 45
#define BRIDGE_AERR_INTR_EN 46
#define BRIDGE_AERR_UPG 47
#define BRIDGE_AERR_CLEAR 48
#define BRIDGE_AERR1_CLEAR 49
#define BRIDGE_SBE_COUNTS 50
#define BRIDGE_DBE_COUNTS 51
#define BRIDGE_BITERR_INT_EN 52
#define BRIDGE_SYS2IO_CREDITS 53
#define BRIDGE_EVNT_CNT_CTRL1 54
#define BRIDGE_EVNT_COUNTER1 55
#define BRIDGE_EVNT_CNT_CTRL2 56
#define BRIDGE_EVNT_COUNTER2 57
#define BRIDGE_RESERVED1 58
#define BRIDGE_DEFEATURE 59
#define BRIDGE_SCRATCH0 60
#define BRIDGE_SCRATCH1 61
#define BRIDGE_SCRATCH2 62
#define BRIDGE_SCRATCH3 63
#endif

Просмотреть файл

@ -0,0 +1,55 @@
/*
* Copyright (c) 2003-2012 Broadcom Corporation
* All Rights Reserved
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the Broadcom
* license below:
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _ASM_NLM_FLASH_H_
#define _ASM_NLM_FLASH_H_
#define FLASH_CSBASE_ADDR(cs) (cs)
#define FLASH_CSADDR_MASK(cs) (0x10 + (cs))
#define FLASH_CSDEV_PARM(cs) (0x20 + (cs))
#define FLASH_CSTIME_PARMA(cs) (0x30 + (cs))
#define FLASH_CSTIME_PARMB(cs) (0x40 + (cs))
#define FLASH_INT_MASK 0x50
#define FLASH_INT_STATUS 0x60
#define FLASH_ERROR_STATUS 0x70
#define FLASH_ERROR_ADDR 0x80
#define FLASH_NAND_CLE(cs) (0x90 + (cs))
#define FLASH_NAND_ALE(cs) (0xa0 + (cs))
#define FLASH_NAND_CSDEV_PARAM 0x000041e6
#define FLASH_NAND_CSTIME_PARAMA 0x4f400e22
#define FLASH_NAND_CSTIME_PARAMB 0x000083cf
#endif

Просмотреть файл

@ -1,2 +1,2 @@
obj-y += setup.o platform.o
obj-y += setup.o platform.o platform-flash.o
obj-$(CONFIG_SMP) += wakeup.o

Просмотреть файл

@ -0,0 +1,220 @@
/*
* Copyright 2011, Netlogic Microsystems.
* Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/resource.h>
#include <linux/spi/flash.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/netlogic/haldefs.h>
#include <asm/netlogic/xlr/iomap.h>
#include <asm/netlogic/xlr/flash.h>
#include <asm/netlogic/xlr/bridge.h>
#include <asm/netlogic/xlr/gpio.h>
#include <asm/netlogic/xlr/xlr.h>
/*
* Default NOR partition layout
*/
static struct mtd_partition xlr_nor_parts[] = {
{
.name = "User FS",
.offset = 0x800000,
.size = MTDPART_SIZ_FULL,
}
};
/*
* Default NAND partition layout
*/
static struct mtd_partition xlr_nand_parts[] = {
{
.name = "Root Filesystem",
.offset = 64 * 64 * 2048,
.size = 432 * 64 * 2048,
},
{
.name = "Home Filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
/* Use PHYSMAP flash for NOR */
struct physmap_flash_data xlr_nor_data = {
.width = 2,
.parts = xlr_nor_parts,
.nr_parts = ARRAY_SIZE(xlr_nor_parts),
};
static struct resource xlr_nor_res[] = {
{
.flags = IORESOURCE_MEM,
},
};
static struct platform_device xlr_nor_dev = {
.name = "physmap-flash",
.dev = {
.platform_data = &xlr_nor_data,
},
.num_resources = ARRAY_SIZE(xlr_nor_res),
.resource = xlr_nor_res,
};
const char *xlr_part_probes[] = { "cmdlinepart", NULL };
/*
* Use "gen_nand" driver for NAND flash
*
* There seems to be no way to store a private pointer containing
* platform specific info in gen_nand drivier. We will use a global
* struct for now, since we currently have only one NAND chip per board.
*/
struct xlr_nand_flash_priv {
int cs;
uint64_t flash_mmio;
};
static struct xlr_nand_flash_priv nand_priv;
static void xlr_nand_ctrl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
if (ctrl & NAND_CLE)
nlm_write_reg(nand_priv.flash_mmio,
FLASH_NAND_CLE(nand_priv.cs), cmd);
else if (ctrl & NAND_ALE)
nlm_write_reg(nand_priv.flash_mmio,
FLASH_NAND_ALE(nand_priv.cs), cmd);
}
struct platform_nand_data xlr_nand_data = {
.chip = {
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(xlr_nand_parts),
.chip_delay = 50,
.partitions = xlr_nand_parts,
.part_probe_types = xlr_part_probes,
},
.ctrl = {
.cmd_ctrl = xlr_nand_ctrl,
},
};
static struct resource xlr_nand_res[] = {
{
.flags = IORESOURCE_MEM,
},
};
static struct platform_device xlr_nand_dev = {
.name = "gen_nand",
.id = -1,
.num_resources = ARRAY_SIZE(xlr_nand_res),
.resource = xlr_nand_res,
.dev = {
.platform_data = &xlr_nand_data,
}
};
/*
* XLR/XLS supports upto 8 devices on its FLASH interface. The value in
* FLASH_BAR (on the MEM/IO bridge) gives the base for mapping all the
* flash devices.
* Under this, each flash device has an offset and size given by the
* CSBASE_ADDR and CSBASE_MASK registers for the device.
*
* The CSBASE_ registers are expected to be setup by the bootloader.
*/
static void setup_flash_resource(uint64_t flash_mmio,
uint64_t flash_map_base, int cs, struct resource *res)
{
u32 base, mask;
base = nlm_read_reg(flash_mmio, FLASH_CSBASE_ADDR(cs));
mask = nlm_read_reg(flash_mmio, FLASH_CSADDR_MASK(cs));
res->start = flash_map_base + ((unsigned long)base << 16);
res->end = res->start + (mask + 1) * 64 * 1024;
}
static int __init xlr_flash_init(void)
{
uint64_t gpio_mmio, flash_mmio, flash_map_base;
u32 gpio_resetcfg, flash_bar;
int cs, boot_nand, boot_nor;
/* Flash address bits 39:24 is in bridge flash BAR */
flash_bar = nlm_read_reg(nlm_io_base, BRIDGE_FLASH_BAR);
flash_map_base = (flash_bar & 0xffff0000) << 8;
gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
flash_mmio = nlm_mmio_base(NETLOGIC_IO_FLASH_OFFSET);
/* Get the chip reset config */
gpio_resetcfg = nlm_read_reg(gpio_mmio, GPIO_PWRON_RESET_CFG_REG);
/* Check for boot flash type */
boot_nor = boot_nand = 0;
if (nlm_chip_is_xls()) {
/* On XLS, check boot from NAND bit (GPIO reset reg bit 16) */
if (gpio_resetcfg & (1 << 16))
boot_nand = 1;
/* check boot from PCMCIA, (GPIO reset reg bit 15 */
if ((gpio_resetcfg & (1 << 15)) == 0)
boot_nor = 1; /* not set, booted from NOR */
} else { /* XLR */
/* check boot from PCMCIA (bit 16 in GPIO reset on XLR) */
if ((gpio_resetcfg & (1 << 16)) == 0)
boot_nor = 1; /* not set, booted from NOR */
}
/* boot flash at chip select 0 */
cs = 0;
if (boot_nand) {
nand_priv.cs = cs;
nand_priv.flash_mmio = flash_mmio;
setup_flash_resource(flash_mmio, flash_map_base, cs,
xlr_nand_res);
/* Initialize NAND flash at CS 0 */
nlm_write_reg(flash_mmio, FLASH_CSDEV_PARM(cs),
FLASH_NAND_CSDEV_PARAM);
nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMA(cs),
FLASH_NAND_CSTIME_PARAMA);
nlm_write_reg(flash_mmio, FLASH_CSTIME_PARMB(cs),
FLASH_NAND_CSTIME_PARAMB);
pr_info("ChipSelect %d: NAND Flash %pR\n", cs, xlr_nand_res);
return platform_device_register(&xlr_nand_dev);
}
if (boot_nor) {
setup_flash_resource(flash_mmio, flash_map_base, cs,
xlr_nor_res);
pr_info("ChipSelect %d: NOR Flash %pR\n", cs, xlr_nor_res);
return platform_device_register(&xlr_nor_dev);
}
return 0;
}
arch_initcall(xlr_flash_init);