mtd: rawnand: arasan: Ensure program page operations are successful
The NAND core complies with the ONFI specification, which itself
mentions that after any program or erase operation, a status check
should be performed to see whether the operation was finished *and*
successful.
The NAND core offers helpers to finish a page write (sending the
"PAGE PROG" command, waiting for the NAND chip to be ready again, and
checking the operation status). But in some cases, advanced controller
drivers might want to optimize this and craft their own page write
helper to leverage additional hardware capabilities, thus not always
using the core facilities.
Some drivers, like this one, do not use the core helper to finish a page
write because the final cycles are automatically managed by the
hardware. In this case, the additional care must be taken to manually
perform the final status check.
Let's read the NAND chip status at the end of the page write helper and
return -EIO upon error.
Cc: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Fixes: 88ffef1b65
("mtd: rawnand: arasan: Support the hardware BCH ECC engine")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/linux-mtd/20230717194221.229778-2-miquel.raynal@bootlin.com
This commit is contained in:
Родитель
9836a98786
Коммит
3a4a893dbb
|
@ -515,6 +515,7 @@ static int anfc_write_page_hw_ecc(struct nand_chip *chip, const u8 *buf,
|
|||
struct mtd_info *mtd = nand_to_mtd(chip);
|
||||
unsigned int len = mtd->writesize + (oob_required ? mtd->oobsize : 0);
|
||||
dma_addr_t dma_addr;
|
||||
u8 status;
|
||||
int ret;
|
||||
struct anfc_op nfc_op = {
|
||||
.pkt_reg =
|
||||
|
@ -561,10 +562,21 @@ static int anfc_write_page_hw_ecc(struct nand_chip *chip, const u8 *buf,
|
|||
}
|
||||
|
||||
/* Spare data is not protected */
|
||||
if (oob_required)
|
||||
if (oob_required) {
|
||||
ret = nand_write_oob_std(chip, page);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
return ret;
|
||||
/* Check write status on the chip side */
|
||||
ret = nand_status_op(chip, &status);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (status & NAND_STATUS_FAIL)
|
||||
return -EIO;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int anfc_sel_write_page_hw_ecc(struct nand_chip *chip, const u8 *buf,
|
||||
|
|
Загрузка…
Ссылка в новой задаче