diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 34088d60da74..6001d76d8676 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -25,110 +25,6 @@ #define BRCM_PHY_REV(phydev) \ ((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask)) -/* - * Broadcom LED source encodings. These are used in BCM5461, BCM5481, - * BCM5482, and possibly some others. - */ -#define BCM_LED_SRC_LINKSPD1 0x0 -#define BCM_LED_SRC_LINKSPD2 0x1 -#define BCM_LED_SRC_XMITLED 0x2 -#define BCM_LED_SRC_ACTIVITYLED 0x3 -#define BCM_LED_SRC_FDXLED 0x4 -#define BCM_LED_SRC_SLAVE 0x5 -#define BCM_LED_SRC_INTR 0x6 -#define BCM_LED_SRC_QUALITY 0x7 -#define BCM_LED_SRC_RCVLED 0x8 -#define BCM_LED_SRC_MULTICOLOR1 0xa -#define BCM_LED_SRC_OPENSHORT 0xb -#define BCM_LED_SRC_OFF 0xe /* Tied high */ -#define BCM_LED_SRC_ON 0xf /* Tied low */ - - -/* - * BCM5482: Shadow registers - * Shadow values go into bits [14:10] of register 0x1c to select a shadow - * register to access. - */ -/* 00101: Spare Control Register 3 */ -#define BCM54XX_SHD_SCR3 0x05 -#define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001 -#define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002 -#define BCM54XX_SHD_SCR3_TRDDAPD 0x0004 - -/* 01010: Auto Power-Down */ -#define BCM54XX_SHD_APD 0x0a -#define BCM54XX_SHD_APD_EN 0x0020 - -#define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */ - /* LED3 / ~LINKSPD[2] selector */ -#define BCM5482_SHD_LEDS1_LED3(src) ((src & 0xf) << 4) - /* LED1 / ~LINKSPD[1] selector */ -#define BCM5482_SHD_LEDS1_LED1(src) ((src & 0xf) << 0) -#define BCM54XX_SHD_RGMII_MODE 0x0b /* 01011: RGMII Mode Selector */ -#define BCM5482_SHD_SSD 0x14 /* 10100: Secondary SerDes control */ -#define BCM5482_SHD_SSD_LEDM 0x0008 /* SSD LED Mode enable */ -#define BCM5482_SHD_SSD_EN 0x0001 /* SSD enable */ -#define BCM5482_SHD_MODE 0x1f /* 11111: Mode Control Register */ -#define BCM5482_SHD_MODE_1000BX 0x0001 /* Enable 1000BASE-X registers */ - - -/* - * EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17) - */ -#define MII_BCM54XX_EXP_AADJ1CH0 0x001f -#define MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN 0x0200 -#define MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF 0x0100 -#define MII_BCM54XX_EXP_AADJ1CH3 0x601f -#define MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ 0x0002 -#define MII_BCM54XX_EXP_EXP08 0x0F08 -#define MII_BCM54XX_EXP_EXP08_RJCT_2MHZ 0x0001 -#define MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE 0x0200 -#define MII_BCM54XX_EXP_EXP75 0x0f75 -#define MII_BCM54XX_EXP_EXP75_VDACCTRL 0x003c -#define MII_BCM54XX_EXP_EXP75_CM_OSC 0x0001 -#define MII_BCM54XX_EXP_EXP96 0x0f96 -#define MII_BCM54XX_EXP_EXP96_MYST 0x0010 -#define MII_BCM54XX_EXP_EXP97 0x0f97 -#define MII_BCM54XX_EXP_EXP97_MYST 0x0c0c - -/* - * BCM5482: Secondary SerDes registers - */ -#define BCM5482_SSD_1000BX_CTL 0x00 /* 1000BASE-X Control */ -#define BCM5482_SSD_1000BX_CTL_PWRDOWN 0x0800 /* Power-down SSD */ -#define BCM5482_SSD_SGMII_SLAVE 0x15 /* SGMII Slave Register */ -#define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */ -#define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */ - - -/*****************************************************************************/ -/* Fast Ethernet Transceiver definitions. */ -/*****************************************************************************/ - -#define MII_BRCM_FET_INTREG 0x1a /* Interrupt register */ -#define MII_BRCM_FET_IR_MASK 0x0100 /* Mask all interrupts */ -#define MII_BRCM_FET_IR_LINK_EN 0x0200 /* Link status change enable */ -#define MII_BRCM_FET_IR_SPEED_EN 0x0400 /* Link speed change enable */ -#define MII_BRCM_FET_IR_DUPLEX_EN 0x0800 /* Duplex mode change enable */ -#define MII_BRCM_FET_IR_ENABLE 0x4000 /* Interrupt enable */ - -#define MII_BRCM_FET_BRCMTEST 0x1f /* Brcm test register */ -#define MII_BRCM_FET_BT_SRE 0x0080 /* Shadow register enable */ - - -/*** Shadow register definitions ***/ - -#define MII_BRCM_FET_SHDW_MISCCTRL 0x10 /* Shadow misc ctrl */ -#define MII_BRCM_FET_SHDW_MC_FAME 0x4000 /* Force Auto MDIX enable */ - -#define MII_BRCM_FET_SHDW_AUXMODE4 0x1a /* Auxiliary mode 4 */ -#define MII_BRCM_FET_SHDW_AM4_LED_MASK 0x0003 -#define MII_BRCM_FET_SHDW_AM4_LED_MODE1 0x0001 - -#define MII_BRCM_FET_SHDW_AUXSTAT2 0x1b /* Auxiliary status 2 */ -#define MII_BRCM_FET_SHDW_AS2_APDE 0x0020 /* Auto power down enable */ - - MODULE_DESCRIPTION("Broadcom PHY driver"); MODULE_AUTHOR("Maciej W. Rozycki"); MODULE_LICENSE("GPL"); diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index 61219b9b3445..be31bf9f60c2 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -92,4 +92,107 @@ #define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 +/* + * Broadcom LED source encodings. These are used in BCM5461, BCM5481, + * BCM5482, and possibly some others. + */ +#define BCM_LED_SRC_LINKSPD1 0x0 +#define BCM_LED_SRC_LINKSPD2 0x1 +#define BCM_LED_SRC_XMITLED 0x2 +#define BCM_LED_SRC_ACTIVITYLED 0x3 +#define BCM_LED_SRC_FDXLED 0x4 +#define BCM_LED_SRC_SLAVE 0x5 +#define BCM_LED_SRC_INTR 0x6 +#define BCM_LED_SRC_QUALITY 0x7 +#define BCM_LED_SRC_RCVLED 0x8 +#define BCM_LED_SRC_MULTICOLOR1 0xa +#define BCM_LED_SRC_OPENSHORT 0xb +#define BCM_LED_SRC_OFF 0xe /* Tied high */ +#define BCM_LED_SRC_ON 0xf /* Tied low */ + + +/* + * BCM5482: Shadow registers + * Shadow values go into bits [14:10] of register 0x1c to select a shadow + * register to access. + */ +/* 00101: Spare Control Register 3 */ +#define BCM54XX_SHD_SCR3 0x05 +#define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001 +#define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002 +#define BCM54XX_SHD_SCR3_TRDDAPD 0x0004 + +/* 01010: Auto Power-Down */ +#define BCM54XX_SHD_APD 0x0a +#define BCM54XX_SHD_APD_EN 0x0020 + +#define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */ + /* LED3 / ~LINKSPD[2] selector */ +#define BCM5482_SHD_LEDS1_LED3(src) ((src & 0xf) << 4) + /* LED1 / ~LINKSPD[1] selector */ +#define BCM5482_SHD_LEDS1_LED1(src) ((src & 0xf) << 0) +#define BCM54XX_SHD_RGMII_MODE 0x0b /* 01011: RGMII Mode Selector */ +#define BCM5482_SHD_SSD 0x14 /* 10100: Secondary SerDes control */ +#define BCM5482_SHD_SSD_LEDM 0x0008 /* SSD LED Mode enable */ +#define BCM5482_SHD_SSD_EN 0x0001 /* SSD enable */ +#define BCM5482_SHD_MODE 0x1f /* 11111: Mode Control Register */ +#define BCM5482_SHD_MODE_1000BX 0x0001 /* Enable 1000BASE-X registers */ + + +/* + * EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17) + */ +#define MII_BCM54XX_EXP_AADJ1CH0 0x001f +#define MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN 0x0200 +#define MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF 0x0100 +#define MII_BCM54XX_EXP_AADJ1CH3 0x601f +#define MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ 0x0002 +#define MII_BCM54XX_EXP_EXP08 0x0F08 +#define MII_BCM54XX_EXP_EXP08_RJCT_2MHZ 0x0001 +#define MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE 0x0200 +#define MII_BCM54XX_EXP_EXP75 0x0f75 +#define MII_BCM54XX_EXP_EXP75_VDACCTRL 0x003c +#define MII_BCM54XX_EXP_EXP75_CM_OSC 0x0001 +#define MII_BCM54XX_EXP_EXP96 0x0f96 +#define MII_BCM54XX_EXP_EXP96_MYST 0x0010 +#define MII_BCM54XX_EXP_EXP97 0x0f97 +#define MII_BCM54XX_EXP_EXP97_MYST 0x0c0c + +/* + * BCM5482: Secondary SerDes registers + */ +#define BCM5482_SSD_1000BX_CTL 0x00 /* 1000BASE-X Control */ +#define BCM5482_SSD_1000BX_CTL_PWRDOWN 0x0800 /* Power-down SSD */ +#define BCM5482_SSD_SGMII_SLAVE 0x15 /* SGMII Slave Register */ +#define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */ +#define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */ + + +/*****************************************************************************/ +/* Fast Ethernet Transceiver definitions. */ +/*****************************************************************************/ + +#define MII_BRCM_FET_INTREG 0x1a /* Interrupt register */ +#define MII_BRCM_FET_IR_MASK 0x0100 /* Mask all interrupts */ +#define MII_BRCM_FET_IR_LINK_EN 0x0200 /* Link status change enable */ +#define MII_BRCM_FET_IR_SPEED_EN 0x0400 /* Link speed change enable */ +#define MII_BRCM_FET_IR_DUPLEX_EN 0x0800 /* Duplex mode change enable */ +#define MII_BRCM_FET_IR_ENABLE 0x4000 /* Interrupt enable */ + +#define MII_BRCM_FET_BRCMTEST 0x1f /* Brcm test register */ +#define MII_BRCM_FET_BT_SRE 0x0080 /* Shadow register enable */ + + +/*** Shadow register definitions ***/ + +#define MII_BRCM_FET_SHDW_MISCCTRL 0x10 /* Shadow misc ctrl */ +#define MII_BRCM_FET_SHDW_MC_FAME 0x4000 /* Force Auto MDIX enable */ + +#define MII_BRCM_FET_SHDW_AUXMODE4 0x1a /* Auxiliary mode 4 */ +#define MII_BRCM_FET_SHDW_AM4_LED_MASK 0x0003 +#define MII_BRCM_FET_SHDW_AM4_LED_MODE1 0x0001 + +#define MII_BRCM_FET_SHDW_AUXSTAT2 0x1b /* Auxiliary status 2 */ +#define MII_BRCM_FET_SHDW_AS2_APDE 0x0020 /* Auto power down enable */ + #endif /* _LINUX_BRCMPHY_H */