From 3b151526eda87901532390e11bba0dd59119f667 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Mon, 28 Dec 2009 13:40:34 +0200 Subject: [PATCH] USB: musb: Add new fifo table for a OMAP3 errata We have observed MSC data read corruption when USB LAN device is also connected and it's interface is up. Silicon team has confirmed an errata where in all the active transfers should use FIFO space either in first 8K or next 8K. So far we have observed the issue in above use case scenario. As a workaround to it, adding a new FIFO config (5) fitting well within first 8K which can be used for such use cases. Signed-off-by: Ajay Kumar Gupta Acked-by: Anand Gadiyar Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index b7e2d1b09ac1..c4893267b4e2 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1095,6 +1095,36 @@ static struct fifo_cfg __initdata mode_4_cfg[] = { { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, }, }; +/* mode 5 - fits in 8KB */ +static struct fifo_cfg __initdata mode_5_cfg[] = { +{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, }, +{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, }, +{ .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 8, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 32, }, +{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 32, }, +{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 512, }, +{ .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, }, +{ .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, }, +}; /* * configure a fifo; for non-shared endpoints, this may be called @@ -1210,6 +1240,10 @@ static int __init ep_config_from_table(struct musb *musb) cfg = mode_4_cfg; n = ARRAY_SIZE(mode_4_cfg); break; + case 5: + cfg = mode_5_cfg; + n = ARRAY_SIZE(mode_5_cfg); + break; } printk(KERN_DEBUG "%s: setup fifo_mode %d\n",