m68knommu: fix FEC driver locking

It's easy: grab locks before talking to hardware and realease
them afterwards. The one big lock has been splitted into a hw_lock
and mii_lock.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Sebastian Siewior 2008-05-01 14:08:12 +10:00 коммит произвёл Linus Torvalds
Родитель c1d9615680
Коммит 3b2b74cad3
1 изменённых файлов: 33 добавлений и 22 удалений

Просмотреть файл

@ -209,7 +209,10 @@ struct fec_enet_private {
cbd_t *cur_rx, *cur_tx; /* The next free ring entry */
cbd_t *dirty_tx; /* The ring entries to be free()ed. */
uint tx_full;
spinlock_t lock;
/* hold while accessing the HW like ringbuffer for tx/rx but not MAC */
spinlock_t hw_lock;
/* hold while accessing the mii_list_t() elements */
spinlock_t mii_lock;
uint phy_id;
uint phy_id_done;
@ -313,6 +316,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
volatile fec_t *fecp;
volatile cbd_t *bdp;
unsigned short status;
unsigned long flags;
fep = netdev_priv(dev);
fecp = (volatile fec_t*)dev->base_addr;
@ -322,6 +326,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
return 1;
}
spin_lock_irqsave(&fep->hw_lock, flags);
/* Fill in a Tx ring entry */
bdp = fep->cur_tx;
@ -332,6 +337,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
* This should not happen, since dev->tbusy should be set.
*/
printk("%s: tx queue full!.\n", dev->name);
spin_unlock_irqrestore(&fep->hw_lock, flags);
return 1;
}
#endif
@ -370,8 +376,6 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
flush_dcache_range((unsigned long)skb->data,
(unsigned long)skb->data + skb->len);
spin_lock_irq(&fep->lock);
/* Send it on its way. Tell FEC it's ready, interrupt when done,
* it's the last BD of the frame, and to put the CRC on the end.
*/
@ -400,7 +404,7 @@ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
fep->cur_tx = (cbd_t *)bdp;
spin_unlock_irq(&fep->lock);
spin_unlock_irqrestore(&fep->hw_lock, flags);
return 0;
}
@ -458,19 +462,20 @@ fec_enet_interrupt(int irq, void * dev_id)
struct net_device *dev = dev_id;
volatile fec_t *fecp;
uint int_events;
int handled = 0;
irqreturn_t ret = IRQ_NONE;
fecp = (volatile fec_t*)dev->base_addr;
/* Get the interrupt events that caused us to be here.
*/
while ((int_events = fecp->fec_ievent) != 0) {
do {
int_events = fecp->fec_ievent;
fecp->fec_ievent = int_events;
/* Handle receive event in its own function.
*/
if (int_events & FEC_ENET_RXF) {
handled = 1;
ret = IRQ_HANDLED;
fec_enet_rx(dev);
}
@ -479,17 +484,18 @@ fec_enet_interrupt(int irq, void * dev_id)
them as part of the transmit process.
*/
if (int_events & FEC_ENET_TXF) {
handled = 1;
ret = IRQ_HANDLED;
fec_enet_tx(dev);
}
if (int_events & FEC_ENET_MII) {
handled = 1;
ret = IRQ_HANDLED;
fec_enet_mii(dev);
}
}
return IRQ_RETVAL(handled);
} while (int_events);
return ret;
}
@ -502,7 +508,7 @@ fec_enet_tx(struct net_device *dev)
struct sk_buff *skb;
fep = netdev_priv(dev);
spin_lock(&fep->lock);
spin_lock_irq(&fep->hw_lock);
bdp = fep->dirty_tx;
while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
@ -561,7 +567,7 @@ fec_enet_tx(struct net_device *dev)
}
}
fep->dirty_tx = (cbd_t *)bdp;
spin_unlock(&fep->lock);
spin_unlock_irq(&fep->hw_lock);
}
@ -588,6 +594,8 @@ fec_enet_rx(struct net_device *dev)
fep = netdev_priv(dev);
fecp = (volatile fec_t*)dev->base_addr;
spin_lock_irq(&fep->hw_lock);
/* First, grab all of the stats for the incoming packet.
* These get messed up if we get called due to a busy condition.
*/
@ -693,6 +701,8 @@ while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
*/
fecp->fec_r_des_active = 0;
#endif
spin_unlock_irq(&fep->hw_lock);
}
@ -706,11 +716,11 @@ fec_enet_mii(struct net_device *dev)
uint mii_reg;
fep = netdev_priv(dev);
spin_lock_irq(&fep->mii_lock);
ep = fep->hwp;
mii_reg = ep->fec_mii_data;
spin_lock(&fep->lock);
if ((mip = mii_head) == NULL) {
printk("MII and no head!\n");
goto unlock;
@ -727,7 +737,7 @@ fec_enet_mii(struct net_device *dev)
ep->fec_mii_data = mip->mii_regval;
unlock:
spin_unlock(&fep->lock);
spin_unlock_irq(&fep->mii_lock);
}
static int
@ -741,12 +751,11 @@ mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_devi
/* Add PHY address to register command.
*/
fep = netdev_priv(dev);
spin_lock_irqsave(&fep->mii_lock, flags);
regval |= fep->phy_addr << 23;
retval = 0;
spin_lock_irqsave(&fep->lock,flags);
if ((mip = mii_free) != NULL) {
mii_free = mip->mii_next;
mip->mii_regval = regval;
@ -763,9 +772,8 @@ mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_devi
retval = 1;
}
spin_unlock_irqrestore(&fep->lock,flags);
return(retval);
spin_unlock_irqrestore(&fep->mii_lock, flags);
return retval;
}
static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
@ -2308,6 +2316,9 @@ int __init fec_enet_init(struct net_device *dev)
return -ENOMEM;
}
spin_lock_init(&fep->hw_lock);
spin_lock_init(&fep->mii_lock);
/* Create an Ethernet device instance.
*/
fecp = (volatile fec_t *) fec_hw[index];