Merge branch 'linus' into x86/pat2

Conflicts: arch/x86/mm/init_64.c
2008-10-10 19:30:08 +02:00 · 2008-10-10 19:30:08 +02:00 · 3dd392a407
--- a/.mailmap
+++ b/.mailmap
@ -96,4 +96,6 @@ Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
 Tony Luck <tony.luck@intel.com>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
+Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
+Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@ -251,8 +251,6 @@ mono.txt
 	- how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
 moxa-smartio
 	- file with info on installing/using Moxa multiport serial driver.
-mtrr.txt
-	- how to use PPro Memory Type Range Registers to increase performance.
 mutex-design.txt
 	- info on the generic mutex subsystem.
 namespaces/
--- a/Documentation/ABI/testing/sysfs-gpio
+++ b/Documentation/ABI/testing/sysfs-gpio
@ -0,0 +1,26 @@
+What:		/sys/class/gpio/
+Date:		July 2008
+KernelVersion:	2.6.27
+Contact:	David Brownell <dbrownell@users.sourceforge.net>
+Description:
+
+  As a Kconfig option, individual GPIO signals may be accessed from
+  userspace.  GPIOs are only made available to userspace by an explicit
+  "export" operation.  If a given GPIO is not claimed for use by
+  kernel code, it may be exported by userspace (and unexported later).
+  Kernel code may export it for complete or partial access.
+
+  GPIOs are identified as they are inside the kernel, using integers in
+  the range 0..INT_MAX.  See Documentation/gpio.txt for more information.
+
+    /sys/class/gpio
+	/export ... asks the kernel to export a GPIO to userspace
+	/unexport ... to return a GPIO to the kernel
+	/gpioN ... for each exported GPIO #N
+	    /value ... always readable, writes fail for input GPIOs
+	    /direction ... r/w as: in, out (default low); write: high, low
+	/gpiochipN ... for each gpiochip; #N is its first GPIO
+	    /base ... (r/o) same as N
+	    /label ... (r/o) descriptive, not necessarily unique
+	    /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1)
+
--- a/Documentation/DMA-mapping.txt
+++ b/Documentation/DMA-mapping.txt
@ -740,7 +740,7 @@ failure can be determined by:
 	dma_addr_t dma_handle;

 	dma_handle = pci_map_single(pdev, addr, size, direction);
-	if (pci_dma_mapping_error(dma_handle)) {
+	if (pci_dma_mapping_error(pdev, dma_handle)) {
 		/*
 		 * reduce current DMA mapping usage,
 		 * delay and try again later or
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@ -77,7 +77,8 @@ documentation files are also added which explain how to use the feature.
 When a kernel change causes the interface that the kernel exposes to
 userspace to change, it is recommended that you send the information or
 a patch to the manual pages explaining the change to the manual pages
-maintainer at mtk.manpages@gmail.com.
+maintainer at mtk.manpages@gmail.com, and CC the list
+linux-api@vger.kernel.org.

 Here is a list of files that are in the kernel source tree that are
 required reading:
--- a/Documentation/SubmitChecklist
+++ b/Documentation/SubmitChecklist
@ -67,6 +67,8 @@ kernel patches.

 19: All new userspace interfaces are documented in Documentation/ABI/.
    See Documentation/ABI/README for more information.
+    Patches that change userspace interfaces should be CCed to
+    linux-api@vger.kernel.org.

 20: Check that it all passes `make headers_check'.

--- a/Documentation/cpu-freq/index.txt
+++ b/Documentation/cpu-freq/index.txt
@ -35,11 +35,9 @@ Mailing List
 ------------
 There is a CPU frequency changing CVS commit and general list where
 you can report bugs, problems or submit patches. To post a message,
-send an email to cpufreq@lists.linux.org.uk, to subscribe go to
-http://lists.linux.org.uk/mailman/listinfo/cpufreq. Previous post to the
-mailing list are available to subscribers at
-http://lists.linux.org.uk/mailman/private/cpufreq/.
-
+send an email to cpufreq@vger.kernel.org, to subscribe go to
+http://vger.kernel.org/vger-lists.html#cpufreq and follow the
+instructions there.

 Links
 -----
@ -50,7 +48,7 @@ how to access the CVS repository:
 * http://cvs.arm.linux.org.uk/

 the CPUFreq Mailing list:
-* http://lists.linux.org.uk/mailman/listinfo/cpufreq
+* http://vger.kernel.org/vger-lists.html#cpufreq

 Clock and voltage scaling for the SA-1100:
 * http://www.lartmaker.nl/projects/scaling
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@ -635,14 +635,16 @@ prior 'mems' setting, will not be moved.

 There is an exception to the above.  If hotplug functionality is used
 to remove all the CPUs that are currently assigned to a cpuset,
-then the kernel will automatically update the cpus_allowed of all
-tasks attached to CPUs in that cpuset to allow all CPUs.  When memory
-hotplug functionality for removing Memory Nodes is available, a
-similar exception is expected to apply there as well.  In general,
-the kernel prefers to violate cpuset placement, over starving a task
-that has had all its allowed CPUs or Memory Nodes taken offline.  User
-code should reconfigure cpusets to only refer to online CPUs and Memory
-Nodes when using hotplug to add or remove such resources.
+then all the tasks in that cpuset will be moved to the nearest ancestor
+with non-empty cpus.  But the moving of some (or all) tasks might fail if
+cpuset is bound with another cgroup subsystem which has some restrictions
+on task attaching.  In this failing case, those tasks will stay
+in the original cpuset, and the kernel will automatically update
+their cpus_allowed to allow all online CPUs.  When memory hotplug
+functionality for removing Memory Nodes is available, a similar exception
+is expected to apply there as well.  In general, the kernel prefers to
+violate cpuset placement, over starving a task that has had all
+its allowed CPUs or Memory Nodes taken offline.

 There is a second exception to the above.  GFP_ATOMIC requests are
 kernel internal allocations that must be satisfied, immediately.
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@ -322,3 +322,11 @@ Why:  Accounting can now be enabled/disabled without kernel recompilation.
      controlled by a kernel/module/sysfs/sysctl parameter.
 Who:  Krzysztof Piotr Oledzki <ole@ans.pl>

+---------------------------
+
+What: ide-scsi (BLK_DEV_IDESCSI)
+When: 2.6.29
+Why:  The 2.6 kernel supports direct writing to ide CD drives, which
+      eliminates the need for ide-scsi. The new method is more
+      efficient in every way.
+Who:  FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@ -2413,6 +2413,8 @@ The following 4 memory types are supported:
  - (bit 1) anonymous shared memory
  - (bit 2) file-backed private memory
  - (bit 3) file-backed shared memory
+  - (bit 4) ELF header pages in file-backed private memory areas (it is
+            effective only if the bit 2 is cleared)

  Note that MMIO pages such as frame buffer are never dumped and vDSO pages
  are always dumped regardless of the bitmask status.
--- a/Documentation/hwmon/adt7473
+++ b/Documentation/hwmon/adt7473
@ -14,14 +14,14 @@ Description

 This driver implements support for the Analog Devices ADT7473 chip family.

-The LM85 uses the 2-wire interface compatible with the SMBUS 2.0
+The ADT7473 uses the 2-wire interface compatible with the SMBUS 2.0
 specification. Using an analog to digital converter it measures three (3)
-temperatures and two (2) voltages. It has three (3) 16-bit counters for
+temperatures and two (2) voltages. It has four (4) 16-bit counters for
 measuring fan speed. There are three (3) PWM outputs that can be used
 to control fan speed.

 A sophisticated control system for the PWM outputs is designed into the
-LM85 that allows fan speed to be adjusted automatically based on any of the
+ADT7473 that allows fan speed to be adjusted automatically based on any of the
 three temperature sensors. Each PWM output is individually adjustable and
 programmable. Once configured, the ADT7473 will adjust the PWM outputs in
 response to the measured temperatures without further host intervention.
@ -46,14 +46,6 @@ from the raw value to get the temperature value.
 The Analog Devices datasheet is very detailed and describes a procedure for
 determining an optimal configuration for the automatic PWM control.

-Hardware Configurations
-----------------------
-
-The ADT7473 chips have an optional SMBALERT output that can be used to
-signal the chipset in case a limit is exceeded or the temperature sensors
-fail. Individual sensor interrupts can be masked so they won't trigger
-SMBALERT. The SMBALERT output if configured replaces the PWM2 function.
-
 Configuration Notes
 -------------------

@ -61,8 +53,8 @@ Besides standard interfaces driver adds the following:

 * PWM Control

-* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and
-* pwm#_auto_point2_pwm and pwm#_auto_point2_temp -
+* pwm#_auto_point1_pwm and temp#_auto_point1_temp and
+* pwm#_auto_point2_pwm and temp#_auto_point2_temp -

 point1: Set the pwm speed at a lower temperature bound.
 point2: Set the pwm speed at a higher temperature bound.
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@ -329,6 +329,10 @@ power[1-*]_average		Average power use
 				Unit: microWatt
 				RO

+power[1-*]_average_interval	Power use averaging interval
+				Unit: milliseconds
+				RW
+
 power[1-*]_average_highest	Historical average maximum power use
 				Unit: microWatt
 				RO
@ -353,6 +357,14 @@ power[1-*]_reset_history	Reset input_highest, input_lowest,
 				average_highest and average_lowest.
 				WO

+**********
+* Energy *
+**********
+
+energy[1-*]_input		Cumulative energy use
+				Unit: microJoule
+				RO
+
 **********
 * Alarms *
 **********
--- a/Documentation/ioctl/cdrom.txt
+++ b/Documentation/ioctl/cdrom.txt
@ -271,14 +271,14 @@ CDROMCLOSETRAY			pendant of CDROMEJECT

 	usage:

-	  ioctl(fd, CDROMEJECT, 0);
+	  ioctl(fd, CDROMCLOSETRAY, 0);

 	inputs:		none

 	outputs:	none

 	error returns:
-	  ENOSYS	cd drive not capable of ejecting
+	  ENOSYS	cd drive not capable of closing the tray
 	  EBUSY		other processes are accessing drive, or door is locked

 	notes:
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@ -463,12 +463,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Range: 0 - 8192
 			Default: 64

-	disable_8254_timer
-	enable_8254_timer
-			[IA32/X86_64] Disable/Enable interrupt 0 timer routing
-			over the 8254 in addition to over the IO-APIC. The
-			kernel tries to set a sensible default.
-
 	hpet=		[X86-32,HPET] option to control HPET usage
 			Format: { enable (default) | disable | force }
 			disable: disable HPET and use PIT instead
@ -1882,6 +1876,12 @@ and is between 256 and 4096 characters. It is defined in the file
 	shapers=	[NET]
 			Maximal number of shapers.

+	show_msr=	[x86] show boot-time MSR settings
+			Format: { <integer> }
+			Show boot-time (BIOS-initialized) MSR settings.
+			The parameter means the number of CPUs to show,
+			for example 1 means boot CPU only.
+
 	sim710=		[SCSI,HW]
 			See header of drivers/scsi/sim710.c.

--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@ -351,9 +351,10 @@ kernel.  This value defaults to SHMMAX.

 softlockup_thresh:

-This value can be used to lower the softlockup tolerance
-threshold. The default threshold is 10s.  If a cpu is locked up
-for 10s, the kernel complains.  Valid values are 1-60s.
+This value can be used to lower the softlockup tolerance threshold.  The
+default threshold is 60 seconds.  If a cpu is locked up for 60 seconds,
+the kernel complains.  Valid values are 1-60 seconds.  Setting this
+tunable to zero will disable the softlockup detection altogether.

 ==============================================================

--- a/Documentation/usb/anchors.txt
+++ b/Documentation/usb/anchors.txt
@ -42,9 +42,21 @@ This function kills all URBs associated with an anchor. The URBs
 are called in the reverse temporal order they were submitted.
 This way no data can be reordered.

+usb_unlink_anchored_urbs()
+--------------------------
+
+This function unlinks all URBs associated with an anchor. The URBs
+are processed in the reverse temporal order they were submitted.
+This is similar to usb_kill_anchored_urbs(), but it will not sleep.
+Therefore no guarantee is made that the URBs have been unlinked when
+the call returns. They may be unlinked later but will be unlinked in
+finite time.
+
 usb_wait_anchor_empty_timeout()
 -------------------------------

 This function waits for all URBs associated with an anchor to finish
 or a timeout, whichever comes first. Its return value will tell you
 whether the timeout was reached.
+
+
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@ -46,7 +46,7 @@
 45 -> Pinnacle PCTV DVB-T                      (em2870)
 46 -> Compro, VideoMate U3                     (em2870)        [185b:2870]
 47 -> KWorld DVB-T 305U                        (em2880)        [eb1a:e305]
- 48 -> KWorld DVB-T 310U                        (em2880)
+ 48 -> KWorld DVB-T 310U                        (em2880)        [eb1a:e310]
 49 -> MSI DigiVox A/D                          (em2880)        [eb1a:e310]
 50 -> MSI DigiVox A/D II                       (em2880)        [eb1a:e320]
 51 -> Terratec Hybrid XS Secam                 (em2880)        [0ccd:004c]
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@ -190,6 +190,7 @@ pac7311		093a:260f	SnakeCam
 pac7311		093a:2621	PAC731x
 pac7311		093a:2624	PAC7302
 pac7311		093a:2626	Labtec 2200
+pac7311		093a:262a	Webcam 300k
 zc3xx		0ac8:0302	Z-star Vimicro zc0302
 vc032x		0ac8:0321	Vimicro generic vc0321
 vc032x		0ac8:0323	Vimicro Vc0323
--- a/Documentation/x86/00-INDEX
+++ b/Documentation/x86/00-INDEX
@ -0,0 +1,4 @@
+00-INDEX
+	- this file
+mtrr.txt
+	- how to use x86 Memory Type Range Registers to increase performance
--- a/Documentation/x86/i386/boot.txt
+++ b/Documentation/x86/i386/boot.txt
@ -308,7 +308,7 @@ Protocol:	2.00+

 Field name:	start_sys
 Type:		read
-Offset/size:	0x20c/4
+Offset/size:	0x20c/2
 Protocol:	2.00+

  The load low segment (0x1000).  Obsolete.
--- a/Documentation/x86/mtrr.txt
+++ b/Documentation/x86/mtrr.txt
@ -18,7 +18,7 @@ Richard Gooch
  The AMD K6-2 (stepping 8 and above) and K6-3 processors have two
  MTRRs. These are supported.  The AMD Athlon family provide 8 Intel
  style MTRRs.
-  
+
  The Centaur C6 (WinChip) has 8 MCRs, allowing write-combining. These
  are supported.

@ -87,7 +87,7 @@ reg00: base=0x00000000 (   0MB), size=  64MB: write-back, count=1
 reg01: base=0xfb000000 (4016MB), size=  16MB: write-combining, count=1
 reg02: base=0xfb000000 (4016MB), size=   4kB: uncachable, count=1

-Some cards (especially Voodoo Graphics boards) need this 4 kB area 
+Some cards (especially Voodoo Graphics boards) need this 4 kB area
 excluded from the beginning of the region because it is used for
 registers.

--- a/Documentation/x86/pat.txt
+++ b/Documentation/x86/pat.txt
@ -14,6 +14,10 @@ PAT allows for different types of memory attributes. The most commonly used
 ones that will be supported at this time are Write-back, Uncached,
 Write-combined and Uncached Minus.

+
+PAT APIs
+--------
+
 There are many different APIs in the kernel that allows setting of memory
 attributes at the page level. In order to avoid aliasing, these interfaces
 should be used thoughtfully. Below is a table of interfaces available,
@ -26,38 +30,38 @@ address range to avoid any aliasing.
 API                    |    RAM   |  ACPI,...  |  Reserved/Holes  |
 -----------------------|----------|------------|------------------|
                       |          |            |                  |
-ioremap                |    --    |    UC      |       UC         |
+ioremap                |    --    |    UC-     |       UC-        |
                       |          |            |                  |
 ioremap_cache          |    --    |    WB      |       WB         |
                       |          |            |                  |
-ioremap_nocache        |    --    |    UC      |       UC         |
+ioremap_nocache        |    --    |    UC-     |       UC-        |
                       |          |            |                  |
 ioremap_wc             |    --    |    --      |       WC         |
                       |          |            |                  |
-set_memory_uc          |    UC    |    --      |       --         |
+set_memory_uc          |    UC-   |    --      |       --         |
 set_memory_wb         |          |            |                  |
                       |          |            |                  |
 set_memory_wc          |    WC    |    --      |       --         |
 set_memory_wb         |          |            |                  |
                       |          |            |                  |
-pci sysfs resource     |    --    |    --      |       UC         |
+pci sysfs resource     |    --    |    --      |       UC-        |
                       |          |            |                  |
 pci sysfs resource_wc  |    --    |    --      |       WC         |
 is IORESOURCE_PREFETCH|          |            |                  |
                       |          |            |                  |
-pci proc               |    --    |    --      |       UC         |
+pci proc               |    --    |    --      |       UC-        |
 !PCIIOC_WRITE_COMBINE |          |            |                  |
                       |          |            |                  |
 pci proc               |    --    |    --      |       WC         |
 PCIIOC_WRITE_COMBINE  |          |            |                  |
                       |          |            |                  |
-/dev/mem               |    --    |    UC      |       UC         |
+/dev/mem               |    --    |  WB/WC/UC- |    WB/WC/UC-     |
 read-write            |          |            |                  |
                       |          |            |                  |
-/dev/mem               |    --    |    UC      |       UC         |
+/dev/mem               |    --    |    UC-     |       UC-        |
 mmap SYNC flag        |          |            |                  |
                       |          |            |                  |
-/dev/mem               |    --    |  WB/WC/UC  |    WB/WC/UC      |
+/dev/mem               |    --    |  WB/WC/UC- |    WB/WC/UC-     |
 mmap !SYNC flag       |          |(from exist-|  (from exist-    |
 and                   |          |  ing alias)|    ing alias)    |
 any alias to this area|          |            |                  |
@ -68,7 +72,7 @@ pci proc               |    --    |    --      |       WC         |
 and                   |          |            |                  |
 MTRR says WB          |          |            |                  |
                       |          |            |                  |
-/dev/mem               |    --    |    --      |    UC_MINUS      |
+/dev/mem               |    --    |    --      |       UC-        |
 mmap !SYNC flag       |          |            |                  |
 no alias to this area |          |            |                  |
 and                   |          |            |                  |
@ -98,3 +102,35 @@ types.

 Drivers should use set_memory_[uc|wc] to set access type for RAM ranges.

+
+PAT debugging
+-------------
+
+With CONFIG_DEBUG_FS enabled, PAT memtype list can be examined by
+
+# mount -t debugfs debugfs /sys/kernel/debug
+# cat /sys/kernel/debug/x86/pat_memtype_list
+PAT memtype list:
+uncached-minus @ 0x7fadf000-0x7fae0000
+uncached-minus @ 0x7fb19000-0x7fb1a000
+uncached-minus @ 0x7fb1a000-0x7fb1b000
+uncached-minus @ 0x7fb1b000-0x7fb1c000
+uncached-minus @ 0x7fb1c000-0x7fb1d000
+uncached-minus @ 0x7fb1d000-0x7fb1e000
+uncached-minus @ 0x7fb1e000-0x7fb25000
+uncached-minus @ 0x7fb25000-0x7fb26000
+uncached-minus @ 0x7fb26000-0x7fb27000
+uncached-minus @ 0x7fb27000-0x7fb28000
+uncached-minus @ 0x7fb28000-0x7fb2e000
+uncached-minus @ 0x7fb2e000-0x7fb2f000
+uncached-minus @ 0x7fb2f000-0x7fb30000
+uncached-minus @ 0x7fb31000-0x7fb32000
+uncached-minus @ 0x80000000-0x90000000
+
+This list shows physical address ranges and various PAT settings used to
+access those physical address ranges.
+
+Another, more verbose way of getting PAT related debug messages is with
+"debugpat" boot parameter. With this parameter, various debug messages are
+printed to dmesg log.
+
--- a/Documentation/x86/i386/usb-legacy-support.txt
+++ b/Documentation/x86/i386/usb-legacy-support.txt
--- a/Documentation/x86/x86_64/boot-options.txt
+++ b/Documentation/x86/x86_64/boot-options.txt
@ -54,10 +54,6 @@ APICs
 		 apicmaintimer. Useful when your PIT timer is totally
 		 broken.

-   disable_8254_timer / enable_8254_timer
-		 Enable interrupt 0 timer routing over the 8254 in addition to over
-	         the IO-APIC. The kernel tries to set a sensible default.
-
 Early Console

   syntax: earlyprintk=vga
--- a/Documentation/x86/i386/zero-page.txt
+++ b/Documentation/x86/i386/zero-page.txt
--- a/188
+++ b/188
@ -271,20 +271,20 @@ W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported

 ACPI WMI DRIVER
-P:      Carlos Corbacho
-M:      carlos@strangeworlds.co.uk
-L:      linux-acpi@vger.kernel.org
-W:      http://www.lesswatts.org/projects/acpi/
-S:      Maintained
+P:	Carlos Corbacho
+M:	carlos@strangeworlds.co.uk
+L:	linux-acpi@vger.kernel.org
+W:	http://www.lesswatts.org/projects/acpi/
+S:	Maintained

 AD1889 ALSA SOUND DRIVER
-P:     Kyle McMartin
-M:     kyle@mcmartin.ca
-P:     Thibaut Varene
-M:     T-Bone@parisc-linux.org
-W:     http://wiki.parisc-linux.org/AD1889
-L:     linux-parisc@vger.kernel.org
-S:     Maintained
+P:	Kyle McMartin
+M:	kyle@mcmartin.ca
+P:	Thibaut Varene
+M:	T-Bone@parisc-linux.org
+W:	http://wiki.parisc-linux.org/AD1889
+L:	linux-parisc@vger.kernel.org
+S:	Maintained

 ADM1025 HARDWARE MONITOR DRIVER
 P:	Jean Delvare
@ -473,11 +473,11 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained

 ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
-P:      Andrew Victor
-M:      linux@maxim.org.za
-L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-W:      http://maxim.org.za/at91_26.html
-S:      Maintained
+P:	Andrew Victor
+M:	linux@maxim.org.za
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W:	http://maxim.org.za/at91_26.html
+S:	Maintained

 ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
 P:	Lennert Buytenhek
@ -532,10 +532,10 @@ L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained

 ARM/HP JORNADA 7XX MACHINE SUPPORT
-P:      Kristoffer Ericson
-M:      kristoffer.ericson@gmail.com
-W:      www.jlime.com
-S:      Maintained
+P:	Kristoffer Ericson
+M:	kristoffer.ericson@gmail.com
+W:	www.jlime.com
+S:	Maintained

 ARM/INTEL IOP32X ARM ARCHITECTURE
 P:	Lennert Buytenhek
@ -1017,7 +1017,7 @@ T:	git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
 S:	Maintained

 CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
-P:   	Jonathan Corbet
+P:	Jonathan Corbet
 M:	corbet@lwn.net
 L:	video4linux-list@redhat.com
 S:	Maintained
@ -1198,9 +1198,7 @@ M:	hpa@zytor.com
 S:	Maintained

 CPUSETS
-P:	Paul Jackson
 P:	Paul Menage
-M:	pj@sgi.com
 M:	menage@google.com
 L:	linux-kernel@vger.kernel.org
 W:	http://www.bullopensource.org/cpuset/
@ -1359,7 +1357,7 @@ P:	Digi International, Inc
 M:	Eng.Linux@digi.com
 L:	Eng.Linux@digi.com
 W:	http://www.digi.com
-S:	Orphaned
+S:	Orphan

 DIRECTORY NOTIFICATION
 P:	Stephen Rothwell
@ -1423,12 +1421,12 @@ L:	linux-acpi@vger.kernel.org
 S:	Supported

 DOCUMENTATION (/Documentation directory)
-P:     Michael Kerrisk
-M:     mtk.manpages@gmail.com
-P:     Randy Dunlap
-M:     rdunlap@xenotime.net
-L:     linux-doc@vger.kernel.org
-S:     Maintained
+P:	Michael Kerrisk
+M:	mtk.manpages@gmail.com
+P:	Randy Dunlap
+M:	rdunlap@xenotime.net
+L:	linux-doc@vger.kernel.org
+S:	Maintained

 DOUBLETALK DRIVER
 P:	James R. Van Zandt
@ -1459,7 +1457,7 @@ S:	Maintained
 DVB SUBSYSTEM AND DRIVERS
 P:	LinuxTV.org Project
 M:	v4l-dvb-maintainer@linuxtv.org
-L: 	linux-dvb@linuxtv.org (subscription required)
+L:	linux-dvb@linuxtv.org (subscription required)
 W:	http://linuxtv.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
 S:	Maintained
@ -1797,7 +1795,7 @@ FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
 P:	Rik Faith
 M:	faith@cs.unc.edu
 L:	linux-scsi@vger.kernel.org
-S:	Odd fixes (e.g., new signatures)
+S:	Odd Fixes (e.g., new signatures)

 GDT SCSI DISK ARRAY CONTROLLER DRIVER
 P:	Achim Leubner
@ -1838,10 +1836,10 @@ S:	Maintained
 HARDWARE MONITORING
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
-S:	Orphaned
+S:	Orphan

 HARDWARE RANDOM NUMBER GENERATOR CORE
-S:	Orphaned
+S:	Orphan

 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
 P:	Robert Love
@ -1984,7 +1982,7 @@ S:	Maintained
 I2C/SMBUS STUB DRIVER
 P:	Mark M. Hoffman
 M:	mhoffman@lightlink.com
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained

 I2C SUBSYSTEM
@ -2108,7 +2106,7 @@ M:	rolandd@cisco.com
 P:	Sean Hefty
 M:	sean.hefty@intel.com
 P:	Hal Rosenstock
-M:	hal.rosenstock@gmail.com 
+M:	hal.rosenstock@gmail.com
 L:	general@lists.openfabrics.org
 W:	http://www.openib.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
@ -2696,17 +2694,18 @@ S:	Maintained

 MARVELL YUKON / SYSKONNECT DRIVER
 P:	Mirko Lindner
-M: 	mlindner@syskonnect.de
+M:	mlindner@syskonnect.de
 P:	Ralph Roesler
-M: 	rroesler@syskonnect.de
-W: 	http://www.syskonnect.com
-S: 	Supported
+M:	rroesler@syskonnect.de
+W:	http://www.syskonnect.com
+S:	Supported

 MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
 P:	Michael Kerrisk
 M:	mtk.manpages@gmail.com
-W:     http://www.kernel.org/doc/man-pages
-S:     Supported
+W:	http://www.kernel.org/doc/man-pages
+L:	linux-man@vger.kernel.org
+S:	Supported

 MARVELL LIBERTAS WIRELESS DRIVER
 P:	Dan Williams
@ -2735,7 +2734,7 @@ S:	Maintained
 MEGARAID SCSI DRIVERS
 P:	Neela Syam Kolli
 M:	megaraidlinux@lsi.com
-S:	linux-scsi@vger.kernel.org
+L:	linux-scsi@vger.kernel.org
 W:	http://megaraid.lsilogic.com
 S:	Maintained

@ -2853,7 +2852,7 @@ MULTIMEDIA CARD (MMC) ETC. OVER SPI
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
 L:	linux-kernel@vger.kernel.org
-S:	Odd fixes
+S:	Odd Fixes

 MULTISOUND SOUND DRIVER
 P:	Andrew Veliath
@ -2867,10 +2866,10 @@ L:	linux-kernel@vger.kernel.org
 S:	Maintained

 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-P:     Felipe Balbi
-M:     felipe.balbi@nokia.com
-L:     linux-usb@vger.kernel.org
-S:     Maintained
+P:	Felipe Balbi
+M:	felipe.balbi@nokia.com
+L:	linux-usb@vger.kernel.org
+S:	Maintained

 MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
 P:	Andrew Gallatin
@ -2882,7 +2881,7 @@ W:	http://www.myri.com/scs/download-Myri10GE.html
 S:	Supported

 NATSEMI ETHERNET DRIVER (DP8381x)
-P: 	Tim Hockin
+P:	Tim Hockin
 M:	thockin@hockin.org
 S:	Maintained

@ -3101,7 +3100,7 @@ M:	laforge@gnumonks.org
 S:	Maintained

 OMNIVISION OV7670 SENSOR DRIVER
-P:   	Jonathan Corbet
+P:	Jonathan Corbet
 M:	corbet@lwn.net
 L:	video4linux-list@redhat.com
 S:	Maintained
@ -3211,7 +3210,7 @@ T:	git kernel.org:/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
 S:	Supported

 PCI HOTPLUG CORE
-P: 	Kristen Carlson Accardi
+P:	Kristen Carlson Accardi
 M:	kristen.c.accardi@intel.com
 S:	Supported

@ -3650,7 +3649,7 @@ M:	jmorris@namei.org
 P:	Eric Paris
 M:	eparis@parisplace.org
 L:	linux-kernel@vger.kernel.org (kernel issues)
-L: 	selinux@tycho.nsa.gov (subscribers-only, general discussion)
+L:	selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:	http://www.nsa.gov/selinux
 S:	Supported

@ -3726,7 +3725,7 @@ S:	Maintained
 SIS 96X I2C/SMBUS DRIVER
 P:	Mark M. Hoffman
 M:	mhoffman@lightlink.com
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained

 SIS FRAMEBUFFER DRIVER
@ -3768,10 +3767,10 @@ M:	bn@niasdigital.com
 S:	Maintained

 SOC-CAMERA V4L2 SUBSYSTEM
-P:     Guennadi Liakhovetski
-M:     g.liakhovetski@gmx.de
-L:     video4linux-list@redhat.com
-S:     Maintained
+P:	Guennadi Liakhovetski
+M:	g.liakhovetski@gmx.de
+L:	video4linux-list@redhat.com
+S:	Maintained

 SOFTWARE RAID (Multiple Disks) SUPPORT
 P:	Ingo Molnar
@ -3833,11 +3832,12 @@ S:	Maintained

 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT
 P:	Liam Girdwood
-M:	liam.girdwood@wolfsonmicro.com
+M:	lrg@slimlogic.co.uk
 P:	Mark Brown
 M:	broonie@opensource.wolfsonmicro.com
 T:	git opensource.wolfsonmicro.com/linux-2.6-asoc
 L:	alsa-devel@alsa-project.org (subscribers-only)
+W:	http://alsa-project.org/main/index.php/ASoC
 S:	Supported

 SPI SUBSYSTEM
@ -3925,7 +3925,7 @@ S:	Maintained

 STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
 W:	http://mosquitonet.Stanford.EDU/strip.html
-S:	Unsupported ?
+S:	Orphan

 STRADIS MPEG-2 DECODER DRIVER
 P:	Nathan Laredo
@ -4006,9 +4006,9 @@ T:	git repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
 S:	Maintained

 TI FLASH MEDIA INTERFACE DRIVER
-P:      Alex Dubov
-M:      oakad@yahoo.com
-S:      Maintained
+P:	Alex Dubov
+M:	oakad@yahoo.com
+S:	Maintained

 TI OMAP MMC INTERFACE DRIVER
 P:	Carlos Aguiar, Anderson Briglia and Syed Khasim
@ -4154,13 +4154,13 @@ USB BLOCK DRIVER (UB ub)
 P:	Pete Zaitcev
 M:	zaitcev@redhat.com
 L:	linux-kernel@vger.kernel.org
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Supported

 USB CDC ETHERNET DRIVER
 P:	Greg Kroah-Hartman
 M:	greg@kroah.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 W:	http://www.kroah.com/linux-usb/

@ -4187,13 +4187,13 @@ S:	Maintained
 USB EHCI DRIVER
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Odd Fixes

 USB ET61X[12]51 DRIVER
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
@ -4201,33 +4201,33 @@ S:	Maintained
 USB GADGET/PERIPHERAL SUBSYSTEM
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org/gadget
 S:	Maintained

 USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
 P:	Jiri Kosina
 M:	jkosina@suse.cz
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained

 USB ISP116X DRIVER
 P:	Olav Kongas
 M:	ok@artecdesign.ee
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained

 USB KAWASAKI LSI DRIVER
 P:	Oliver Neukum
 M:	oliver@neukum.name
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained

 USB MASS STORAGE DRIVER
 P:	Matthew Dharm
 M:	mdharm-usb@one-eyed-alien.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	usb-storage@lists.one-eyed-alien.net
 S:	Maintained
 W:	http://www.one-eyed-alien.net/~mdharm/linux-usb/
@ -4235,26 +4235,26 @@ W:	http://www.one-eyed-alien.net/~mdharm/linux-usb/
 USB OHCI DRIVER
 P:	David Brownell
 M:	dbrownell@users.sourceforge.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Odd Fixes

 USB OPTION-CARD DRIVER
 P:	Matthias Urlichs
 M:	smurf@smurf.noris.de
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained

 USB OV511 DRIVER
 P:	Mark McClelland
 M:	mmcclell@bigfoot.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://alpha.dyndns.org/ov511/
 S:	Maintained

 USB PEGASUS DRIVER
 P:	Petko Manolov
 M:	petkan@users.sourceforge.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
 W:	http://pegasus2.sourceforge.net/
 S:	Maintained
@ -4262,13 +4262,13 @@ S:	Maintained
 USB PRINTER DRIVER (usblp)
 P:	Pete Zaitcev
 M:	zaitcev@redhat.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Supported

 USB RTL8150 DRIVER
 P:	Petko Manolov
 M:	petkan@users.sourceforge.net
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
 W:	http://pegasus2.sourceforge.net/
 S:	Maintained
@ -4276,20 +4276,20 @@ S:	Maintained
 USB SE401 DRIVER
 P:	Jeroen Vreeken
 M:	pe1rxq@amsat.org
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://www.chello.nl/~j.vreeken/se401/
 S:	Maintained

 USB SERIAL BELKIN F5U103 DRIVER
 P:	William Greathouse
 M:	wgreathouse@smva.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained

 USB SERIAL CYPRESS M8 DRIVER
 P:	Lonnie Mendez
 M:	dignome@gmail.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained
 W:	http://geocities.com/i0xox0i
 W:	http://firstlight.net/cvs
@ -4304,39 +4304,39 @@ USB SERIAL DIGI ACCELEPORT DRIVER
 P:	Peter Berger and Al Borchers
 M:	pberger@brimson.com
 M:	alborchers@steinerpoint.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained

 USB SERIAL DRIVER
 P:	Greg Kroah-Hartman
 M:	gregkh@suse.de
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Supported

 USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
 P:	Gary Brubaker
 M:	xavyer@ix.netcom.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained

 USB SERIAL KEYSPAN DRIVER
 P:	Greg Kroah-Hartman
 M:	greg@kroah.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://www.kroah.com/linux/
 S:	Maintained

 USB SERIAL WHITEHEAT DRIVER
 P:	Support Department
 M:	support@connecttech.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://www.connecttech.com
 S:	Supported

 USB SN9C1xx DRIVER
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
@ -4344,7 +4344,7 @@ S:	Maintained
 USB SUBSYSTEM
 P:	Greg Kroah-Hartman
 M:	gregkh@suse.de
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
@ -4352,7 +4352,7 @@ S:	Supported
 USB UHCI DRIVER
 P:	Alan Stern
 M:	stern@rowland.harvard.edu
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 S:	Maintained

 USB "USBNET" DRIVER FRAMEWORK
@ -4365,7 +4365,7 @@ S:	Maintained
 USB VIDEO CLASS
 P:	Laurent Pinchart
 M:	laurent.pinchart@skynet.be
-L:	linx-uvc-devel@berlios.de
+L:	linux-uvc-devel@lists.berlios.de
 L:	video4linux-list@redhat.com
 W:	http://linux-uvc.berlios.de
 S:	Maintained
@ -4373,7 +4373,7 @@ S:	Maintained
 USB W996[87]CF DRIVER
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
@ -4387,7 +4387,7 @@ S:	Maintained
 USB ZC0301 DRIVER
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	video4linux-list@redhat.com
 W:	http://www.linux-projects.org
 S:	Maintained
@ -4395,14 +4395,14 @@ S:	Maintained
 USB ZD1201 DRIVER
 P:	Jeroen Vreeken
 M:	pe1rxq@amsat.org
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 W:	http://linux-lc100020.sourceforge.net
 S:	Maintained

 USB ZR364XX DRIVER
 P:	Antoine Jacquet
 M:	royale@zerezo.com
-L:      linux-usb@vger.kernel.org
+L:	linux-usb@vger.kernel.org
 L:	video4linux-list@redhat.com
 W:	http://royale.zerezo.com/zr364xx/
 S:	Maintained
--- a/2
+++ b/2
@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 27
-EXTRAVERSION = -rc6
+EXTRAVERSION =
 NAME = Rotary Wombat

 # *DOCUMENTATION*
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@ -30,7 +30,7 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
 * The networking and block device layers use this boolean for bounce
 * buffer decisions.
 */
-#define PCI_DMA_BUS_IS_PHYS     (0)
+#define PCI_DMA_BUS_IS_PHYS     (1)

 /*
 * Whether pci_unmap_{single,page} is a nop depends upon the
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@ -111,8 +111,6 @@ int kgdb_arch_handle_exception(int exception_vector, int signo,
 	case 'D':
 	case 'k':
 	case 'c':
-		kgdb_contthread = NULL;
-
 		/*
 		 * Try to read optional parameter, pc unchanged if no parm.
 		 * If this was a compiled breakpoint, we need to move
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@ -70,9 +70,6 @@ void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
 {
 	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;

-	if (id < 0)
-		return;
-
 	mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
 	if (enable)
 		mdctl |= 0x00000003;	/* Enable Module */
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@ -54,7 +54,7 @@ static struct platform_device pcm037_flash = {
 };

 static struct imxuart_platform_data uart_pdata = {
-	.flags = 0,
+	.flags = IMXUART_HAVE_RTSCTS,
 };

 static struct platform_device *devices[] __initdata = {
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@ -17,9 +17,9 @@
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
 #include <linux/sched.h>
+#include <linux/cnt32_to_63.h>

 #include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <mach/pxa-regs.h>
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@ -50,6 +50,7 @@
 #include <asm/mach/sharpsl_param.h>

 #include "generic.h"
+#include "clock.h"
 #include "devices.h"

 static unsigned long tosa_pin_config[] = {
@ -521,6 +522,14 @@ static struct gpio_keys_button tosa_gpio_keys[] = {
 		.wakeup	= 1,
 		.active_low = 1,
 	},
+	{
+		.type	= EV_SW,
+		.code	= SW_HEADPHONE_INSERT,
+		.gpio	= TOSA_GPIO_EAR_IN,
+		.desc	= "HeadPhone insert",
+		.active_low = 1,
+		.debounce_interval = 300,
+	},
 };

 static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
@ -792,6 +801,8 @@ static void __init tosa_init(void)
 	pxa_set_i2c_info(NULL);
 	platform_scoop_config = &tosa_pcmcia_config;

+	clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }

--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@ -18,9 +18,9 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>	/* just for sched_clock() - funny that */
 #include <linux/platform_device.h>
+#include <linux/cnt32_to_63.h>

 #include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
 #include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
--- a/arch/arm/mach-sa1100/include/mach/jornada720.h
+++ b/arch/arm/mach-sa1100/include/mach/jornada720.h
@ -1,10 +1,10 @@
 /*
 * arch/arm/mach-sa1100/include/mach/jornada720.h
 *
- * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
+ * SSP/MCU communication definitions for HP Jornada 710/720/728
 *
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
- *  Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
+ * Copyright 2007,2008 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ *  Copyright 2000 John Ankcorn <jca@lcs.mit.edu>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
@ -25,3 +25,8 @@
 #define PWMOFF			0xDF
 #define TXDUMMY			0x11
 #define ERRORCODE		0x00
+
+extern void jornada_ssp_start(void);
+extern void jornada_ssp_end(void);
+extern int jornada_ssp_inout(u8 byte);
+extern int jornada_ssp_byte(u8 byte);
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@ -21,8 +21,8 @@
 #include <linux/slab.h>

 #include <mach/hardware.h>
-#include <asm/hardware/ssp.h>
 #include <mach/jornada720.h>
+#include <asm/hardware/ssp.h>

 static DEFINE_SPINLOCK(jornada_ssp_lock);
 static unsigned long jornada_ssp_flags;
@ -109,12 +109,12 @@ EXPORT_SYMBOL(jornada_ssp_inout);
 * jornada_ssp_start - enable mcu
 *
 */
-int jornada_ssp_start()
+void jornada_ssp_start(void)
 {
 	spin_lock_irqsave(&jornada_ssp_lock, jornada_ssp_flags);
 	GPCR = GPIO_GPIO25;
 	udelay(50);
-	return 0;
+	return;
 };
 EXPORT_SYMBOL(jornada_ssp_start);

@ -122,11 +122,11 @@ EXPORT_SYMBOL(jornada_ssp_start);
 * jornada_ssp_end - disable mcu and turn off lock
 *
 */
-int jornada_ssp_end()
+void jornada_ssp_end(void)
 {
 	GPSR = GPIO_GPIO25;
 	spin_unlock_irqrestore(&jornada_ssp_lock, jornada_ssp_flags);
-	return 0;
+	return;
 };
 EXPORT_SYMBOL(jornada_ssp_end);

--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@ -28,8 +28,8 @@
 #include <linux/amba/clcd.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/cnt32_to_63.h>

-#include <asm/cnt32_to_63.h>
 #include <asm/system.h>
 #include <mach/hardware.h>
 #include <asm/io.h>
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@ -21,6 +21,7 @@

 #include <mach/tc.h>
 #include <mach/board.h>
+#include <mach/mmc.h>
 #include <mach/mux.h>
 #include <mach/gpio.h>
 #include <mach/menelaus.h>
@ -194,25 +195,38 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,

 /*-------------------------------------------------------------------------*/

-#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)

-#ifdef CONFIG_ARCH_OMAP24XX
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define	OMAP_MMC1_BASE		0x4809c000
-#define OMAP_MMC1_INT		INT_24XX_MMC_IRQ
-#else
-#define	OMAP_MMC1_BASE		0xfffb7800
-#define OMAP_MMC1_INT		INT_MMC
-#endif
-#define	OMAP_MMC2_BASE		0xfffb7c00	/* omap16xx only */
+#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x1fc)
+#define	OMAP_MMC1_INT		INT_24XX_MMC_IRQ

-static struct omap_mmc_conf mmc1_conf;
+#define	OMAP_MMC2_BASE		0x480b4000
+#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x1fc)
+#define	OMAP_MMC2_INT		INT_24XX_MMC2_IRQ
+
+#else
+
+#define	OMAP_MMC1_BASE		0xfffb7800
+#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x7f)
+#define OMAP_MMC1_INT		INT_MMC
+
+#define	OMAP_MMC2_BASE		0xfffb7c00	/* omap16xx only */
+#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x7f)
+#define	OMAP_MMC2_INT		INT_1610_MMC2
+
+#endif
+
+static struct omap_mmc_platform_data mmc1_data;

 static u64 mmc1_dmamask = 0xffffffff;

 static struct resource mmc1_resources[] = {
 	{
 		.start		= OMAP_MMC1_BASE,
-		.end		= OMAP_MMC1_BASE + 0x7f,
+		.end		= OMAP_MMC1_END,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
@ -226,26 +240,27 @@ static struct platform_device mmc_omap_device1 = {
 	.id		= 1,
 	.dev = {
 		.dma_mask	= &mmc1_dmamask,
-		.platform_data	= &mmc1_conf,
+		.platform_data	= &mmc1_data,
 	},
 	.num_resources	= ARRAY_SIZE(mmc1_resources),
 	.resource	= mmc1_resources,
 };

-#ifdef	CONFIG_ARCH_OMAP16XX
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+	defined(CONFIG_ARCH_OMAP34XX)

-static struct omap_mmc_conf mmc2_conf;
+static struct omap_mmc_platform_data mmc2_data;

 static u64 mmc2_dmamask = 0xffffffff;

 static struct resource mmc2_resources[] = {
 	{
 		.start		= OMAP_MMC2_BASE,
-		.end		= OMAP_MMC2_BASE + 0x7f,
+		.end		= OMAP_MMC2_END,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= INT_1610_MMC2,
+		.start		= OMAP_MMC2_INT,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@ -255,26 +270,19 @@ static struct platform_device mmc_omap_device2 = {
 	.id		= 2,
 	.dev = {
 		.dma_mask	= &mmc2_dmamask,
-		.platform_data	= &mmc2_conf,
+		.platform_data	= &mmc2_data,
 	},
 	.num_resources	= ARRAY_SIZE(mmc2_resources),
 	.resource	= mmc2_resources,
 };
 #endif

-static void __init omap_init_mmc(void)
+static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)
 {
-	const struct omap_mmc_config	*mmc_conf;
-	const struct omap_mmc_conf	*mmc;
-
-	/* NOTE:  assumes MMC was never (wrongly) enabled */
-	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
-	if (!mmc_conf)
+	if (cpu_is_omap2430() || cpu_is_omap34xx())
 		return;

-	/* block 1 is always available and has just one pinout option */
-	mmc = &mmc_conf->mmc[0];
-	if (mmc->enabled) {
+	if (mmc_conf->mmc[0].enabled) {
 		if (cpu_is_omap24xx()) {
 			omap_cfg_reg(H18_24XX_MMC_CMD);
 			omap_cfg_reg(H15_24XX_MMC_CLKI);
@ -292,7 +300,7 @@ static void __init omap_init_mmc(void)
 				omap_cfg_reg(P20_1710_MMC_DATDIR0);
 			}
 		}
-		if (mmc->wire4) {
+		if (mmc_conf->mmc[0].wire4) {
 			if (cpu_is_omap24xx()) {
 				omap_cfg_reg(H14_24XX_MMC_DAT1);
 				omap_cfg_reg(E19_24XX_MMC_DAT2);
@ -303,25 +311,22 @@ static void __init omap_init_mmc(void)
 			} else {
 				omap_cfg_reg(MMC_DAT1);
 				/* NOTE:  DAT2 can be on W10 (here) or M15 */
-				if (!mmc->nomux)
+				if (!mmc_conf->mmc[0].nomux)
 					omap_cfg_reg(MMC_DAT2);
 				omap_cfg_reg(MMC_DAT3);
 			}
 		}
-		mmc1_conf = *mmc;
-		(void) platform_device_register(&mmc_omap_device1);
 	}

 #ifdef	CONFIG_ARCH_OMAP16XX
 	/* block 2 is on newer chips, and has many pinout options */
-	mmc = &mmc_conf->mmc[1];
-	if (mmc->enabled) {
-		if (!mmc->nomux) {
+	if (mmc_conf->mmc[1].enabled) {
+		if (!mmc_conf->mmc[1].nomux) {
 			omap_cfg_reg(Y8_1610_MMC2_CMD);
 			omap_cfg_reg(Y10_1610_MMC2_CLK);
 			omap_cfg_reg(R18_1610_MMC2_CLKIN);
 			omap_cfg_reg(W8_1610_MMC2_DAT0);
-			if (mmc->wire4) {
+			if (mmc_conf->mmc[1].wire4) {
 				omap_cfg_reg(V8_1610_MMC2_DAT1);
 				omap_cfg_reg(W15_1610_MMC2_DAT2);
 				omap_cfg_reg(R10_1610_MMC2_DAT3);
@ -337,14 +342,55 @@ static void __init omap_init_mmc(void)
 		if (cpu_is_omap1710())
 			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),
 				     MOD_CONF_CTRL_1);
-		mmc2_conf = *mmc;
+	}
+#endif
+}
+
+static void __init omap_init_mmc(void)
+{
+	const struct omap_mmc_config	*mmc_conf;
+
+	/* NOTE:  assumes MMC was never (wrongly) enabled */
+	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);
+	if (!mmc_conf)
+		return;
+
+	omap_init_mmc_conf(mmc_conf);
+
+	if (mmc_conf->mmc[0].enabled) {
+		mmc1_data.conf = mmc_conf->mmc[0];
+		(void) platform_device_register(&mmc_omap_device1);
+	}
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+	defined(CONFIG_ARCH_OMAP34XX)
+	if (mmc_conf->mmc[1].enabled) {
+		mmc2_data.conf = mmc_conf->mmc[1];
 		(void) platform_device_register(&mmc_omap_device2);
 	}
 #endif
-	return;
 }
+
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info)
+{
+	switch (host) {
+	case 1:
+		mmc1_data = *info;
+		break;
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \
+	defined(CONFIG_ARCH_OMAP34XX)
+	case 2:
+		mmc2_data = *info;
+		break;
+#endif
+	default:
+		BUG();
+	}
+}
+
 #else
 static inline void omap_init_mmc(void) {}
+void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {}
 #endif

 /*-------------------------------------------------------------------------*/
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@ -325,7 +325,7 @@ static int __init atstk1002_init(void)
 #ifdef CONFIG_BOARD_ATSTK100X_SPI1
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
-#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_mci(0, MCI_PDATA);
 #endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
--- a/arch/avr32/boot/images/.gitignore
+++ b/arch/avr32/boot/images/.gitignore
@ -0,0 +1,4 @@
+uImage
+uImage.srec
+vmlinux.cso
+sfdwarf.log
--- a/arch/avr32/kernel/.gitignore
+++ b/arch/avr32/kernel/.gitignore
@ -0,0 +1 @@
+vmlinux.lds
--- a/arch/avr32/kernel/avr32_ksyms.c
+++ b/arch/avr32/kernel/avr32_ksyms.c
@ -58,6 +58,7 @@ EXPORT_SYMBOL(find_first_zero_bit);
 EXPORT_SYMBOL(find_next_zero_bit);
 EXPORT_SYMBOL(find_first_bit);
 EXPORT_SYMBOL(find_next_bit);
+EXPORT_SYMBOL(generic_find_next_le_bit);
 EXPORT_SYMBOL(generic_find_next_zero_le_bit);

 /* I/O primitives (lib/io-*.S) */
--- a/arch/avr32/kernel/syscall-stubs.S
+++ b/arch/avr32/kernel/syscall-stubs.S
@ -109,3 +109,12 @@ __sys_epoll_pwait:
 	rcall	sys_epoll_pwait
 	sub	sp, -4
 	popm	pc
+
+	.global __sys_sync_file_range
+	.type	__sys_sync_file_range,@function
+__sys_sync_file_range:
+	pushm	lr
+	st.w	--sp, ARG6
+	rcall	sys_sync_file_range
+	sub	sp, -4
+	popm	pc
--- a/arch/avr32/kernel/syscall_table.S
+++ b/arch/avr32/kernel/syscall_table.S
@ -275,7 +275,7 @@ sys_call_table:
 	.long	sys_set_robust_list
 	.long	sys_get_robust_list	/* 260 */
 	.long	__sys_splice
-	.long	sys_sync_file_range
+	.long	__sys_sync_file_range
 	.long	sys_tee
 	.long	sys_vmsplice
 	.long	__sys_epoll_pwait	/* 265 */
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@ -116,15 +116,15 @@ asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
 	switch (ret) {
 	case NOTIFY_OK:
 	case NOTIFY_STOP:
-		return;
+		break;
 	case NOTIFY_BAD:
 		die("Fatal Non-Maskable Interrupt", regs, SIGINT);
 	default:
+		printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
+		nmi_disable();
 		break;
 	}
-
-	printk(KERN_ALERT "Got NMI, but nobody cared. Disabling...\n");
-	nmi_disable();
+	nmi_exit();
 }

 asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
--- a/arch/avr32/lib/findbit.S
+++ b/arch/avr32/lib/findbit.S
@ -123,6 +123,36 @@ ENTRY(find_next_bit)
 	brgt	1b
 	retal	r11

+ENTRY(generic_find_next_le_bit)
+	lsr	r8, r10, 5
+	sub	r9, r11, r10
+	retle	r11
+
+	lsl	r8, 2
+	add	r12, r8
+	andl	r10, 31, COH
+	breq	1f
+
+	/* offset is not word-aligned. Handle the first (32 - r10) bits */
+	ldswp.w	r8, r12[0]
+	sub	r12, -4
+	lsr	r8, r8, r10
+	brne	.L_found
+
+	/* r9 = r9 - (32 - r10) = r9 + r10 - 32 */
+	add	r9, r10
+	sub	r9, 32
+	retle	r11
+
+	/* Main loop. offset must be word-aligned */
+1:	ldswp.w	r8, r12[0]
+	cp.w	r8, 0
+	brne	.L_found
+	sub	r12, -4
+	sub	r9, 32
+	brgt	1b
+	retal	r11
+
 ENTRY(generic_find_next_zero_le_bit)
 	lsr	r8, r10, 5
 	sub	r9, r11, r10
--- a/arch/ia64/include/asm/elf.h
+++ b/arch/ia64/include/asm/elf.h
@ -266,4 +266,19 @@ do {									\
 	}								\
 } while (0)

+/*
+ * format for entries in the Global Offset Table
+ */
+struct got_entry {
+	uint64_t val;
+};
+
+/*
+ * Layout of the Function Descriptor
+ */
+struct fdesc {
+	uint64_t ip;
+	uint64_t gp;
+};
+
 #endif /* _ASM_IA64_ELF_H */
--- a/arch/ia64/include/asm/sections.h
+++ b/arch/ia64/include/asm/sections.h
@ -6,9 +6,14 @@
 *	David Mosberger-Tang <davidm@hpl.hp.com>
 */

+#include <linux/elf.h>
+#include <linux/uaccess.h>
 #include <asm-generic/sections.h>

 extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
+#ifdef	CONFIG_SMP
+extern char __cpu0_per_cpu[];
+#endif
 extern char __start___vtop_patchlist[], __end___vtop_patchlist[];
 extern char __start___rse_patchlist[], __end___rse_patchlist[];
 extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[];
@ -22,7 +27,16 @@ extern char __start_unwind[], __end_unwind[];
 extern char __start_ivt_text[], __end_ivt_text[];

 #undef dereference_function_descriptor
-void *dereference_function_descriptor(void *);
+static inline void *dereference_function_descriptor(void *ptr)
+{
+	struct fdesc *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->ip, p))
+		ptr = p;
+	return ptr;
+}
+

 #endif /* _ASM_IA64_SECTIONS_H */

--- a/arch/ia64/include/asm/sn/bte.h
+++ b/arch/ia64/include/asm/sn/bte.h
@ -223,10 +223,11 @@ extern void bte_error_handler(unsigned long);
 * until the transfer is complete.  In order to get the asynch
 * version of bte_copy, you must perform this check yourself.
 */
-#define BTE_UNALIGNED_COPY(src, dest, len, mode)                        \
-	(((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) ||             \
-	  (dest & L1_CACHE_MASK)) ?                                     \
-	 bte_unaligned_copy(src, dest, len, mode) :              	\
+#define BTE_UNALIGNED_COPY(src, dest, len, mode)			\
+	(((len & (L1_CACHE_BYTES - 1)) ||				\
+	  (src & (L1_CACHE_BYTES - 1)) ||				\
+	  (dest & (L1_CACHE_BYTES - 1))) ?				\
+	 bte_unaligned_copy(src, dest, len, mode) :			\
 	 bte_copy(src, dest, len, mode, NULL))


--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@ -1232,9 +1232,10 @@ efi_initialize_iomem_resources(struct resource *code_resource,
 				if (md->attribute & EFI_MEMORY_WP) {
 					name = "System ROM";
 					flags |= IORESOURCE_READONLY;
-				} else {
+				} else if (md->attribute == EFI_MEMORY_UC)
+					name = "Uncached RAM";
+				else
 					name = "System RAM";
-				}
 				break;

 			case EFI_ACPI_MEMORY_NVS:
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@ -367,16 +367,17 @@ start_ap:
 	;;
 #else
 (isAP)	br.few 2f
-	mov r20=r19
-	sub r19=r19,r18
+	movl r20=__cpu0_per_cpu
 	;;
 	shr.u r18=r18,3
 1:
-	ld8 r21=[r20],8;;
-	st8[r19]=r21,8
+	ld8 r21=[r19],8;;
+	st8[r20]=r21,8
 	adds r18=-1,r18;;
 	cmp4.lt p7,p6=0,r18
 (p7)	br.cond.dptk.few 1b
+	mov r19=r20
+	;;
 2:
 #endif
 	tpa r19=r19
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@ -31,11 +31,9 @@
 #include <linux/elf.h>
 #include <linux/moduleloader.h>
 #include <linux/string.h>
-#include <linux/uaccess.h>
 #include <linux/vmalloc.h>

 #include <asm/patch.h>
-#include <asm/sections.h>
 #include <asm/unaligned.h>

 #define ARCH_MODULE_DEBUG 0
@ -137,15 +135,6 @@ static const char *reloc_name[256] = {

 #undef N

-struct got_entry {
-	uint64_t val;
-};
-
-struct fdesc {
-	uint64_t ip;
-	uint64_t gp;
-};
-
 /* Opaque struct for insns, to protect against derefs. */
 struct insn;

@ -943,13 +932,3 @@ module_arch_cleanup (struct module *mod)
 	if (mod->arch.core_unw_table)
 		unw_remove_unwind_table(mod->arch.core_unw_table);
 }
-
-void *dereference_function_descriptor(void *ptr)
-{
-	struct fdesc *desc = ptr;
-	void *p;
-
-	if (!probe_kernel_address(&desc->ip, p))
-		ptr = p;
-	return ptr;
-}
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@ -616,7 +616,9 @@ setup_arch (char **cmdline_p)
 		ia64_mca_init();

 	platform_setup(cmdline_p);
+#ifndef CONFIG_IA64_HP_SIM
 	check_sal_cache_flush();
+#endif
 	paging_init();
 }

--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@ -741,16 +741,14 @@ int __cpu_disable(void)
 			return -EBUSY;
 	}

-	cpu_clear(cpu, cpu_online_map);
-
 	if (migrate_platform_irqs(cpu)) {
 		cpu_set(cpu, cpu_online_map);
 		return (-EBUSY);
 	}

 	remove_siblinginfo(cpu);
-	cpu_clear(cpu, cpu_online_map);
 	fixup_irqs();
+	cpu_clear(cpu, cpu_online_map);
 	local_flush_tlb_all();
 	cpu_clear(cpu, cpu_callin_map);
 	return 0;
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@ -215,9 +215,6 @@ SECTIONS
  /* Per-cpu data: */
  percpu : { } :percpu
  . = ALIGN(PERCPU_PAGE_SIZE);
-#ifdef	CONFIG_SMP
-  . = . + PERCPU_PAGE_SIZE;	/* cpu0 per-cpu space */
-#endif
  __phys_per_cpu_start = .;
  .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET)
 	{
@ -233,6 +230,11 @@ SECTIONS
  data : { } :data
  .data : AT(ADDR(.data) - LOAD_OFFSET)
 	{
+#ifdef	CONFIG_SMP
+  . = ALIGN(PERCPU_PAGE_SIZE);
+		__cpu0_per_cpu = .;
+  . = . + PERCPU_PAGE_SIZE;	/* cpu0 per-cpu space */
+#endif
 		DATA_DATA
 		*(.data1)
 		*(.gnu.linkonce.d*)
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@ -38,6 +38,7 @@
 #include <asm/cacheflush.h>
 #include <asm/div64.h>
 #include <asm/tlb.h>
+#include <asm/elf.h>

 #include "misc.h"
 #include "vti.h"
@ -61,12 +62,6 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ NULL }
 };

-
-struct fdesc{
-    unsigned long ip;
-    unsigned long gp;
-};
-
 static void kvm_flush_icache(unsigned long start, unsigned long len)
 {
 	int l;
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@ -163,7 +163,7 @@ per_cpu_init (void)
 	 * get_zeroed_page().
 	 */
 	if (first_time) {
-		void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+		void *cpu0_data = __cpu0_per_cpu;

 		first_time=0;

--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@ -144,7 +144,7 @@ static void *per_cpu_node_setup(void *cpu_data, int node)

 	for_each_possible_early_cpu(cpu) {
 		if (cpu == 0) {
-			void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+			void *cpu0_data = __cpu0_per_cpu;
 			__per_cpu_offset[cpu] = (char*)cpu0_data -
 				__per_cpu_start;
 		} else if (node == node_cpuid[cpu].nid) {
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@ -420,8 +420,10 @@ tioca_dma_mapped(struct pci_dev *pdev, u64 paddr, size_t req_size)
 		entry = find_next_zero_bit(map, mapsize, last_entry);
 	}

-	if (entry > mapsize)
+	if (entry > mapsize) {
+		kfree(ca_dmamap);
 		goto map_return;
+	}

 	for (i = 0; i < entries; i++)
 		set_bit(entry + i, map);
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@ -216,10 +216,6 @@ config MEMORY_SIZE
 	default "01000000" if PLAT_M32104UT
 	default "00800000" if PLAT_OAKS32R

-config NOHIGHMEM
-	bool
-	default y
-
 config ARCH_DISCONTIGMEM_ENABLE
 	bool "Internal RAM Support"
 	depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP || CHIP_M32104
@ -410,11 +406,7 @@ config PCI_DIRECT
 source "drivers/pci/Kconfig"

 config ISA
-	bool "ISA support"
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  If you have ISA, say Y, otherwise N.
+	bool

 source "drivers/pcmcia/Kconfig"

--- a/arch/m32r/kernel/entry.S
+++ b/arch/m32r/kernel/entry.S
@ -143,7 +143,7 @@ ret_from_intr:
 	and3	r4, r4, #0x8000		; check BSM bit
 #endif
 	beqz	r4, resume_kernel
-ENTRY(resume_userspace)
+resume_userspace:
 	DISABLE_INTERRUPTS(r4)		; make sure we don't miss an interrupt
 					; setting need_resched or sigpending
 					; between sampling and the iret
--- a/arch/m32r/kernel/head.S
+++ b/arch/m32r/kernel/head.S
@ -29,7 +29,6 @@ __INITDATA
 	.global _end
 ENTRY(stext)
 ENTRY(_stext)
-ENTRY(startup_32)
 	/* Setup up the stack pointer */
 	LDIMM	(r0, spi_stack_top)
 	LDIMM	(r1, spu_stack_top)
--- a/arch/m32r/kernel/irq.c
+++ b/arch/m32r/kernel/irq.c
@ -22,9 +22,6 @@
 #include <linux/module.h>
 #include <asm/uaccess.h>

-atomic_t irq_err_count;
-atomic_t irq_mis_count;
-
 /*
 * Generic, controller-independent functions:
 */
@ -63,9 +60,6 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_putc(p, '\n');
 skip:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS) {
-		seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
-		seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
 	}
 	return 0;
 }
--- a/arch/m32r/kernel/m32r_ksyms.c
+++ b/arch/m32r/kernel/m32r_ksyms.c
@ -14,6 +14,7 @@
 #include <asm/delay.h>
 #include <asm/irq.h>
 #include <asm/tlbflush.h>
+#include <asm/pgtable.h>

 /* platform dependent support */
 EXPORT_SYMBOL(boot_cpu_data);
@ -65,6 +66,7 @@ EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(clear_page);
 EXPORT_SYMBOL(strlen);
+EXPORT_SYMBOL(empty_zero_page);

 EXPORT_SYMBOL(_inb);
 EXPORT_SYMBOL(_inw);
--- a/arch/m32r/kernel/process.c
+++ b/arch/m32r/kernel/process.c
@ -35,8 +35,6 @@

 #include <linux/err.h>

-static int hlt_counter=0;
-
 /*
 * Return saved PC of a blocked thread.
 */
@ -48,31 +46,16 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 /*
 * Powermanagement idle function, if any..
 */
-void (*pm_idle)(void) = NULL;
-EXPORT_SYMBOL(pm_idle);
+static void (*pm_idle)(void) = NULL;

 void (*pm_power_off)(void) = NULL;
 EXPORT_SYMBOL(pm_power_off);

-void disable_hlt(void)
-{
-	hlt_counter++;
-}
-
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
-	hlt_counter--;
-}
-
-EXPORT_SYMBOL(enable_hlt);
-
 /*
 * We use this is we don't have any better
 * idle routine..
 */
-void default_idle(void)
+static void default_idle(void)
 {
 	/* M32R_FIXME: Please use "cpu_sleep" mode.  */
 	cpu_relax();
@ -260,15 +243,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long spu,
 	return 0;
 }

-/*
- * Capture the user space registers if the task is not running (in user space)
- */
-int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
-{
-	/* M32R_FIXME */
-	return 1;
-}
-
 asmlinkage int sys_fork(unsigned long r0, unsigned long r1, unsigned long r2,
 	unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6,
 	struct pt_regs regs)
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@ -84,7 +84,7 @@ void smp_send_timer(void);
 void smp_ipi_timer_interrupt(struct pt_regs *);
 void smp_local_timer_interrupt(void);

-void send_IPI_allbutself(int, int);
+static void send_IPI_allbutself(int, int);
 static void send_IPI_mask(cpumask_t, int, int);
 unsigned long send_IPI_mask_phys(cpumask_t, int, int);

@ -722,7 +722,7 @@ void smp_local_timer_interrupt(void)
 * ---------- --- --------------------------------------------------------
 *
 *==========================================================================*/
-void send_IPI_allbutself(int ipi_num, int try)
+static void send_IPI_allbutself(int ipi_num, int try)
 {
 	cpumask_t cpumask;

--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@ -34,7 +34,6 @@
 #include <asm/hw_irq.h>

 #ifdef CONFIG_SMP
-extern void send_IPI_allbutself(int, int);
 extern void smp_local_timer_interrupt(void);
 #endif

@ -188,7 +187,7 @@ static long last_rtc_update = 0;
 * timer_interrupt() needs to keep up the real-time clock,
 * as well as call the "do_timer()" routine every clocktick
 */
-irqreturn_t timer_interrupt(int irq, void *dev_id)
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 #ifndef CONFIG_SMP
 	profile_tick(CPU_PROFILING);
@ -228,7 +227,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }

-struct irqaction irq0 = {
+static struct irqaction irq0 = {
 	.handler = timer_interrupt,
 	.flags = IRQF_DISABLED,
 	.mask = CPU_MASK_NONE,
--- a/arch/m32r/kernel/traps.c
+++ b/arch/m32r/kernel/traps.c
@ -61,7 +61,7 @@ extern unsigned long	eit_vector[];
 	((unsigned long)func - (unsigned long)eit_vector - entry*4)/4 \
 	+ 0xff000000UL

-void	set_eit_vector_entries(void)
+static void set_eit_vector_entries(void)
 {
 	extern void default_eit_handler(void);
 	extern void system_call(void);
@ -121,9 +121,9 @@ void __init trap_init(void)
 	cpu_init();
 }

-int kstack_depth_to_print = 24;
+static int kstack_depth_to_print = 24;

-void show_trace(struct task_struct *task, unsigned long *stack)
+static void show_trace(struct task_struct *task, unsigned long *stack)
 {
 	unsigned long addr;

@ -224,7 +224,7 @@ bad:
 	printk("\n");
 }

-DEFINE_SPINLOCK(die_lock);
+static DEFINE_SPINLOCK(die_lock);

 void die(const char * str, struct pt_regs * regs, long err)
 {
--- a/arch/m32r/lib/delay.c
+++ b/arch/m32r/lib/delay.c
@ -6,6 +6,7 @@
 */

 #include <linux/param.h>
+#include <linux/module.h>
 #ifdef CONFIG_SMP
 #include <linux/sched.h>
 #include <asm/current.h>
@ -121,3 +122,4 @@ void __ndelay(unsigned long nsecs)
 {
 	__const_udelay(nsecs * 0x00005);  /* 2**32 / 1000000000 (rounded up) */
 }
+EXPORT_SYMBOL(__ndelay);
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:00 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set

 #
 # IO Schedulers
@ -166,10 +172,6 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
 CONFIG_NET=y

 #
@ -183,6 +185,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@ -460,6 +466,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@ -470,6 +477,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@ -489,8 +497,6 @@ CONFIG_BLK_DEV_GAYLE=y
 CONFIG_BLK_DEV_IDEDOUBLER=y
 CONFIG_BLK_DEV_BUDDHA=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set

 #
 # SCSI device support
@ -556,6 +562,7 @@ CONFIG_A2091_SCSI=y
 CONFIG_GVP11_SCSI=y
 CONFIG_SCSI_A4000T=y
 CONFIG_SCSI_ZORRO7XX=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@ -564,7 +571,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@ -573,13 +580,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@ -722,6 +725,7 @@ CONFIG_INPUT_M68K_BEEP=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@ -757,6 +761,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set

 #
@ -768,8 +773,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set

 #
 # Multimedia devices
@ -844,10 +851,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_PAULA=m
 CONFIG_DMASOUND=m
@ -861,6 +864,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set

@ -899,6 +903,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@ -958,6 +963,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -980,7 +986,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@ -989,7 +994,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set

 #
@ -1054,6 +1058,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set

 #
@ -1113,6 +1119,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@ -1154,6 +1164,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:01 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set

 #
 # IO Schedulers
@ -161,10 +167,6 @@ CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y

 #
@ -178,6 +180,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@ -411,6 +414,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@ -430,7 +434,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@ -448,6 +454,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@ -499,6 +506,7 @@ CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@ -507,7 +515,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@ -516,13 +524,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@ -532,7 +536,6 @@ CONFIG_VETH=m
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
-CONFIG_APOLLO_ELPLUS=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@ -627,6 +630,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@ -657,6 +661,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set

 #
@ -668,8 +673,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set

 #
 # Multimedia devices
@ -738,10 +745,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@ -753,6 +756,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set

 #
@ -789,6 +793,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@ -848,6 +853,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -860,18 +866,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@ -880,7 +885,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set

 #
@ -944,6 +948,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set

 #
@ -1003,6 +1009,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@ -1044,6 +1054,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:02 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set

 #
 # IO Schedulers
@ -162,10 +168,6 @@ CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y

 #
@ -179,6 +181,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@ -409,6 +412,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@ -428,7 +432,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@ -452,6 +458,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@ -462,6 +469,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@ -479,8 +487,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_FALCON_IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set

 #
 # SCSI device support
@ -530,6 +536,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_ATARI_SCSI=y
 # CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
 # CONFIG_ATARI_SCSI_RESET_BOOT is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@ -538,7 +545,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@ -547,13 +554,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@ -666,6 +669,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@ -700,6 +704,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set

 #
@ -711,8 +716,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set

 #
 # Multimedia devices
@ -782,10 +789,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
 CONFIG_DMASOUND=m
@ -799,6 +802,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set

@ -806,11 +810,8 @@ CONFIG_HIDRAW=y
 # Character devices
 #
 CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
 CONFIG_ATARI_MIDI=m
 CONFIG_ATARI_DSP56K=m
-# CONFIG_SERIAL_CONSOLE is not set

 #
 # File systems
@ -820,8 +821,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
 CONFIG_JBD=y
+CONFIG_JBD2=y
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@ -840,6 +843,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@ -899,6 +903,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -920,7 +925,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-CONFIG_SUNRPC_BIND34=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@ -929,7 +933,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set

 #
@ -994,6 +997,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set

 #
@ -1053,6 +1058,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@ -1094,6 +1103,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:03 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set

 #
 # IO Schedulers
@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y

 #
@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@ -503,6 +510,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_BVME6000_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@ -511,7 +519,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@ -520,13 +528,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@ -631,6 +635,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@ -661,6 +666,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set

 #
@ -672,8 +678,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set

 #
 # Multimedia devices
@ -708,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@ -723,6 +727,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set

 #
@ -759,6 +764,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@ -818,6 +824,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -830,18 +837,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@ -850,7 +856,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set

 #
@ -915,6 +920,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set

 #
@ -974,6 +981,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@ -1015,6 +1026,7 @@ CONFIG_BITREVERSE=m
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=m
 # CONFIG_CRC7 is not set
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:04 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set

 #
 # IO Schedulers
@ -162,10 +168,6 @@ CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y

 #
@ -179,6 +181,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@ -412,6 +415,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@ -431,7 +435,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@ -449,6 +455,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@ -500,6 +507,7 @@ CONFIG_SCSI_SRP_TGT_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@ -508,7 +516,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@ -517,13 +525,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@ -636,6 +640,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@ -666,6 +671,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set

 #
@ -677,8 +683,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set

 #
 # Multimedia devices
@ -747,10 +755,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@ -762,6 +766,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set

 #
@ -796,6 +801,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@ -855,6 +861,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -867,18 +874,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@ -887,7 +893,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set

 #
@ -951,6 +956,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set

 #
@ -1010,6 +1017,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@ -1051,6 +1062,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:06 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set

 #
 # IO Schedulers
@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y

 #
@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@ -460,6 +467,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@ -477,8 +485,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_MAC_IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set

 #
 # SCSI device support
@ -527,6 +533,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MAC_SCSI=y
 CONFIG_SCSI_MAC_ESP=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@ -535,7 +542,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@ -544,9 +551,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_MACINTOSH_DRIVERS=y
@ -559,7 +563,6 @@ CONFIG_ADB_CUDA=y
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@ -670,6 +673,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@ -700,6 +704,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set

 #
@ -711,8 +716,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set

 #
 # Multimedia devices
@ -784,10 +791,6 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@ -799,6 +802,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set

 #
@ -836,6 +840,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@ -895,6 +900,7 @@ CONFIG_HFSPLUS_FS=y
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -917,7 +923,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@ -926,7 +931,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set

 #
@ -991,6 +995,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set

 #
@ -1050,6 +1056,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@ -1091,6 +1101,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:07 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set

 #
 # IO Schedulers
@ -173,10 +179,6 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
 CONFIG_NET=y

 #
@ -190,6 +192,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@ -427,6 +430,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@ -446,7 +450,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@ -476,6 +482,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@ -486,6 +493,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@ -508,8 +516,6 @@ CONFIG_BLK_DEV_FALCON_IDE=y
 CONFIG_BLK_DEV_MAC_IDE=y
 CONFIG_BLK_DEV_Q40IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set

 #
 # SCSI device support
@ -584,6 +590,7 @@ CONFIG_MVME147_SCSI=y
 CONFIG_MVME16x_SCSI=y
 CONFIG_BVME6000_SCSI=y
 CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@ -592,7 +599,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@ -601,9 +608,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_MACINTOSH_DRIVERS=y
@ -616,7 +620,6 @@ CONFIG_ADB_CUDA=y
 CONFIG_INPUT_ADBHID=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@ -632,7 +635,6 @@ CONFIG_A2065=m
 CONFIG_HYDRA=m
 CONFIG_ZORRO8390=m
 CONFIG_APNE=m
-CONFIG_APOLLO_ELPLUS=y
 CONFIG_MAC8390=y
 CONFIG_MAC89x0=m
 CONFIG_MACSONIC=m
@ -791,6 +793,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@ -827,6 +830,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set

 #
@ -838,8 +842,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set

 #
 # Multimedia devices
@ -923,10 +929,6 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
 CONFIG_DMASOUND_PAULA=m
@ -942,6 +944,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set

@ -949,8 +952,6 @@ CONFIG_HIDRAW=y
 # Character devices
 #
 CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
 CONFIG_ATARI_MIDI=m
 CONFIG_ATARI_DSP56K=m
 CONFIG_AMIGA_BUILTIN_SERIAL=y
@ -972,8 +973,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
 CONFIG_JBD=y
+CONFIG_JBD2=y
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@ -992,6 +995,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@ -1051,6 +1055,7 @@ CONFIG_HFSPLUS_FS=y
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -1063,18 +1068,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@ -1083,7 +1087,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set

 #
@ -1152,6 +1155,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set

 #
@ -1211,6 +1216,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@ -1252,6 +1261,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:08 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set

 #
 # IO Schedulers
@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y

 #
@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@ -502,6 +509,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MVME147_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@ -510,7 +518,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@ -519,13 +527,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@ -630,6 +634,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@ -660,6 +665,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set

 #
@ -671,8 +677,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set

 #
 # Multimedia devices
@ -707,10 +715,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@ -722,6 +726,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set

 #
@ -758,6 +763,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@ -817,6 +823,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -829,18 +836,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@ -849,7 +855,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set

 #
@ -914,6 +919,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set

 #
@ -973,6 +980,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@ -1014,6 +1025,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:09 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set

 #
 # IO Schedulers
@ -163,10 +169,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y

 #
@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@ -413,6 +416,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@ -432,7 +436,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@ -450,6 +456,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@ -503,6 +510,7 @@ CONFIG_ISCSI_TCP=m
 CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_MVME16x_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@ -511,7 +519,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@ -520,13 +528,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@ -631,6 +635,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@ -661,6 +666,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set

 #
@ -672,8 +678,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set

 #
 # Multimedia devices
@ -708,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@ -723,6 +727,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set

 #
@ -760,6 +765,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@ -819,6 +825,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -831,18 +838,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@ -851,7 +857,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set

 #
@ -916,6 +921,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set

 #
@ -975,6 +982,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@ -1016,6 +1027,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:10 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set

 #
 # IO Schedulers
@ -163,10 +169,6 @@ CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y

 #
@ -180,6 +182,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@ -410,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@ -429,7 +433,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@ -448,6 +454,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@ -458,6 +465,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@ -475,8 +483,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_Q40IDE=y
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set

 #
 # SCSI device support
@ -536,6 +542,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@ -544,7 +551,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@ -553,13 +560,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@ -680,6 +683,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@ -711,6 +715,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set

 #
@ -722,8 +727,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set

 #
 # Multimedia devices
@ -792,10 +799,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
 CONFIG_DMASOUND_Q40=m
 CONFIG_DMASOUND=m
@ -809,6 +812,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set

 #
@ -843,6 +847,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@ -902,6 +907,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -924,7 +930,6 @@ CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@ -933,7 +938,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set

 #
@ -997,6 +1001,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set

 #
@ -1056,6 +1062,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@ -1097,6 +1107,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:11 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set

 #
 # IO Schedulers
@ -149,10 +155,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y

 #
@ -166,6 +168,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@ -399,6 +402,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@ -418,7 +422,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@ -436,6 +442,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@ -488,6 +495,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SUN3_SCSI=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@ -496,7 +504,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@ -505,13 +513,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@ -527,7 +531,6 @@ CONFIG_SUN3_82586=y
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set

@ -617,6 +620,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@ -647,19 +651,20 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set

 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set

 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set

 #
 # Multimedia devices
@ -727,10 +732,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@ -776,6 +777,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@ -835,6 +837,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -847,18 +850,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@ -867,7 +869,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set

 #
@ -932,6 +933,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set

 #
@ -991,6 +994,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@ -1032,6 +1039,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:12 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
@ -52,7 +52,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@ -75,10 +74,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 # CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@ -95,6 +100,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set

 #
 # IO Schedulers
@ -160,10 +166,6 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
 CONFIG_ZONE_DMA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
 CONFIG_NET=y

 #
@ -177,6 +179,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@ -410,6 +413,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@ -429,7 +433,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 # CONFIG_MTD is not set
@ -447,6 +453,7 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@ -499,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@ -507,7 +515,7 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=m
 CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
 # CONFIG_DM_DEBUG is not set
@ -516,13 +524,9 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
 # CONFIG_DM_DELAY is not set
 CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 CONFIG_MACVLAN=m
@ -627,6 +631,7 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@ -657,6 +662,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set

 #
@ -668,8 +674,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set

 #
 # Multimedia devices
@ -737,10 +745,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@ -752,6 +756,7 @@ CONFIG_HIDRAW=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set

 #
@ -786,6 +791,7 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@ -845,6 +851,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@ -857,18 +864,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@ -877,7 +883,6 @@ CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set

 #
@ -942,6 +947,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set

 #
@ -1001,6 +1008,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@ -1042,6 +1053,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@ -211,6 +211,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_MIPS_CMP if BROKEN	# because SYNC_R4K is broken
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_SMARTMIPS
 	help
@ -1403,7 +1404,6 @@ config MIPS_MT_SMTC
 	depends on CPU_MIPS32_R2
 	#depends on CPU_MIPS64_R2		# once there is hardware ...
 	depends on SYS_SUPPORTS_MULTITHREADING
-	select GENERIC_CLOCKEVENTS_BROADCAST
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select MIPS_MT
@ -1451,32 +1451,17 @@ config MIPS_VPE_LOADER
 	  Includes a loader for loading an elf relocatable object
 	  onto another VPE and running it.

-config MIPS_MT_SMTC_INSTANT_REPLAY
-	bool "Low-latency Dispatch of Deferred SMTC IPIs"
-	depends on MIPS_MT_SMTC && !PREEMPT
-	default y
-	help
-	  SMTC pseudo-interrupts between TCs are deferred and queued
-	  if the target TC is interrupt-inhibited (IXMT). In the first
-	  SMTC prototypes, these queued IPIs were serviced on return
-	  to user mode, or on entry into the kernel idle loop. The
-	  INSTANT_REPLAY option dispatches them as part of local_irq_restore()
-	  processing, which adds runtime overhead (hence the option to turn
-	  it off), but ensures that IPIs are handled promptly even under
-	  heavy I/O interrupt load.
-
 config MIPS_MT_SMTC_IM_BACKSTOP
 	bool "Use per-TC register bits as backstop for inhibited IM bits"
 	depends on MIPS_MT_SMTC
-	default y
+	default n
 	help
 	  To support multiple TC microthreads acting as "CPUs" within
 	  a VPE, VPE-wide interrupt mask bits must be specially manipulated
 	  during interrupt handling. To support legacy drivers and interrupt
 	  controller management code, SMTC has a "backstop" to track and
 	  if necessary restore the interrupt mask. This has some performance
-	  impact on interrupt service overhead. Disable it only if you know
-	  what you are doing.
+	  impact on interrupt service overhead.

 config MIPS_MT_SMTC_IRQAFF
 	bool "Support IRQ affinity API"
@ -1486,10 +1471,8 @@ config MIPS_MT_SMTC_IRQAFF
 	  Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.)
 	  for SMTC Linux kernel. Requires platform support, of which
 	  an example can be found in the MIPS kernel i8259 and Malta
-	  platform code.  It is recommended that MIPS_MT_SMTC_INSTANT_REPLAY
-	  be enabled if MIPS_MT_SMTC_IRQAFF is used. Adds overhead to
-	  interrupt dispatch, and should be used only if you know what
-	  you are doing.
+	  platform code.  Adds some overhead to interrupt dispatch, and
+	  should be used only if you know what you are doing.

 config MIPS_VPE_LOADER_TOM
 	bool "Load VPE program into memory hidden from linux"
@ -1517,6 +1500,18 @@ config MIPS_APSP_KSPD
 	  "exit" syscall notifying other kernel modules the SP program is
 	  exiting.  You probably want to say yes here.

+config MIPS_CMP
+	bool "MIPS CMP framework support"
+	depends on SYS_SUPPORTS_MIPS_CMP
+	select SYNC_R4K if BROKEN
+	select SYS_SUPPORTS_SMP
+	select SYS_SUPPORTS_SCHED_SMT if SMP
+	select WEAK_ORDERING
+	default n
+	help
+	  This is a placeholder option for the GCMP work. It will need to
+	  be handled differently...
+
 config SB1_PASS_1_WORKAROUNDS
 	bool
 	depends on CPU_SB1_PASS_1
@ -1693,6 +1688,9 @@ config SMP
 config SMP_UP
 	bool

+config SYS_SUPPORTS_MIPS_CMP
+	bool
+
 config SYS_SUPPORTS_SMP
 	bool

@ -1740,17 +1738,6 @@ config NR_CPUS
 	  performance should round up your number of processors to the next
 	  power of two.

-config MIPS_CMP
-	bool "MIPS CMP framework support"
-	depends on SMP
-	select SYNC_R4K
-	select SYS_SUPPORTS_SCHED_SMT
-	select WEAK_ORDERING
-	default n
-	help
-	  This is a placeholder option for the GCMP work. It will need to
-	  be handled differently...
-
 source "kernel/time/Kconfig"

 #
--- a/arch/mips/au1000/common/gpio.c
+++ b/arch/mips/au1000/common/gpio.c
@ -48,7 +48,7 @@ static void au1xxx_gpio2_write(unsigned gpio, int value)
 {
 	gpio -= AU1XXX_GPIO_BASE;

-	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio);
+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
 }

 static int au1xxx_gpio2_direction_input(unsigned gpio)
@ -61,7 +61,8 @@ static int au1xxx_gpio2_direction_input(unsigned gpio)
 static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
 {
 	gpio -= AU1XXX_GPIO_BASE;
-	gpio2->dir = (0x01 << gpio) | (value << gpio);
+	gpio2->dir |= 0x01 << gpio;
+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | ((!!value) << gpio);
 	return 0;
 }

@ -90,6 +91,7 @@ static int au1xxx_gpio1_direction_input(unsigned gpio)
 static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
 {
 	gpio1->trioutclr = (0x01 & gpio);
+	au1xxx_gpio1_write(gpio, value);
 	return 0;
 }

--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@ -10,6 +10,7 @@ obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \

 obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
 obj-$(CONFIG_CEVT_R4K)		+= cevt-r4k.o
+obj-$(CONFIG_MIPS_MT_SMTC)	+= cevt-smtc.o
 obj-$(CONFIG_CEVT_DS1287)	+= cevt-ds1287.o
 obj-$(CONFIG_CEVT_GT641XX)	+= cevt-gt641xx.o
 obj-$(CONFIG_CEVT_SB1250)	+= cevt-sb1250.o
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@ -12,6 +12,14 @@

 #include <asm/smtc_ipi.h>
 #include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+/*
+ * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
+ * of these routines with SMTC-specific variants.
+ */
+
+#ifndef CONFIG_MIPS_MT_SMTC

 static int mips_next_event(unsigned long delta,
                           struct clock_event_device *evt)
@ -19,60 +27,27 @@ static int mips_next_event(unsigned long delta,
 	unsigned int cnt;
 	int res;

-#ifdef CONFIG_MIPS_MT_SMTC
-	{
-	unsigned long flags, vpflags;
-	local_irq_save(flags);
-	vpflags = dvpe();
-#endif
 	cnt = read_c0_count();
 	cnt += delta;
 	write_c0_compare(cnt);
 	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
-#ifdef CONFIG_MIPS_MT_SMTC
-	evpe(vpflags);
-	local_irq_restore(flags);
-	}
-#endif
 	return res;
 }

-static void mips_set_mode(enum clock_event_mode mode,
-                          struct clock_event_device *evt)
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+void mips_set_clock_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
 {
 	/* Nothing to do ...  */
 }

-static DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
-static int cp0_timer_irq_installed;
+DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
+int cp0_timer_irq_installed;

-/*
- * Timer ack for an R4k-compatible timer of a known frequency.
- */
-static void c0_timer_ack(void)
-{
-	write_c0_compare(read_c0_compare());
-}
+#ifndef CONFIG_MIPS_MT_SMTC

-/*
- * Possibly handle a performance counter interrupt.
- * Return true if the timer interrupt should not be checked
- */
-static inline int handle_perf_irq(int r2)
-{
-	/*
-	 * The performance counter overflow interrupt may be shared with the
-	 * timer interrupt (cp0_perfcount_irq < 0). If it is and a
-	 * performance counter has overflowed (perf_irq() == IRQ_HANDLED)
-	 * and we can't reliably determine if a counter interrupt has also
-	 * happened (!r2) then don't check for a timer interrupt.
-	 */
-	return (cp0_perfcount_irq < 0) &&
-		perf_irq() == IRQ_HANDLED &&
-		!r2;
-}
-
-static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 {
 	const int r2 = cpu_has_mips_r2;
 	struct clock_event_device *cd;
@ -93,12 +68,8 @@ static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 	 * interrupt.  Being the paranoiacs we are we check anyway.
 	 */
 	if (!r2 || (read_c0_cause() & (1 << 30))) {
-		c0_timer_ack();
-#ifdef CONFIG_MIPS_MT_SMTC
-		if (cpu_data[cpu].vpe_id)
-			goto out;
-		cpu = 0;
-#endif
+		/* Clear Count/Compare Interrupt */
+		write_c0_compare(read_c0_compare());
 		cd = &per_cpu(mips_clockevent_device, cpu);
 		cd->event_handler(cd);
 	}
@ -107,65 +78,16 @@ out:
 	return IRQ_HANDLED;
 }

-static struct irqaction c0_compare_irqaction = {
+#endif /* Not CONFIG_MIPS_MT_SMTC */
+
+struct irqaction c0_compare_irqaction = {
 	.handler = c0_compare_interrupt,
-#ifdef CONFIG_MIPS_MT_SMTC
-	.flags = IRQF_DISABLED,
-#else
 	.flags = IRQF_DISABLED | IRQF_PERCPU,
-#endif
 	.name = "timer",
 };

-#ifdef CONFIG_MIPS_MT_SMTC
-DEFINE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);

-static void smtc_set_mode(enum clock_event_mode mode,
-                          struct clock_event_device *evt)
-{
-}
-
-static void mips_broadcast(cpumask_t mask)
-{
-	unsigned int cpu;
-
-	for_each_cpu_mask(cpu, mask)
-		smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
-}
-
-static void setup_smtc_dummy_clockevent_device(void)
-{
-	//uint64_t mips_freq = mips_hpt_^frequency;
-	unsigned int cpu = smp_processor_id();
-	struct clock_event_device *cd;
-
-	cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
-
-	cd->name		= "SMTC";
-	cd->features		= CLOCK_EVT_FEAT_DUMMY;
-
-	/* Calculate the min / max delta */
-	cd->mult	= 0; //div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
-	cd->shift		= 0; //32;
-	cd->max_delta_ns	= 0; //clockevent_delta2ns(0x7fffffff, cd);
-	cd->min_delta_ns	= 0; //clockevent_delta2ns(0x30, cd);
-
-	cd->rating		= 200;
-	cd->irq			= 17; //-1;
-//	if (cpu)
-//		cd->cpumask	= CPU_MASK_ALL; // cpumask_of_cpu(cpu);
-//	else
-		cd->cpumask	= cpumask_of_cpu(cpu);
-
-	cd->set_mode		= smtc_set_mode;
-
-	cd->broadcast		= mips_broadcast;
-
-	clockevents_register_device(cd);
-}
-#endif
-
-static void mips_event_handler(struct clock_event_device *dev)
+void mips_event_handler(struct clock_event_device *dev)
 {
 }

@ -177,7 +99,23 @@ static int c0_compare_int_pending(void)
 	return (read_c0_cause() >> cp0_compare_irq) & 0x100;
 }

-static int c0_compare_int_usable(void)
+/*
+ * Compare interrupt can be routed and latched outside the core,
+ * so a single execution hazard barrier may not be enough to give
+ * it time to clear as seen in the Cause register.  4 time the
+ * pipeline depth seems reasonably conservative, and empirically
+ * works better in configurations with high CPU/bus clock ratios.
+ */
+
+#define compare_change_hazard() \
+	do { \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+		irq_disable_hazard(); \
+	} while (0)
+
+int c0_compare_int_usable(void)
 {
 	unsigned int delta;
 	unsigned int cnt;
@ -187,7 +125,7 @@ static int c0_compare_int_usable(void)
 	 */
 	if (c0_compare_int_pending()) {
 		write_c0_compare(read_c0_count());
-		irq_disable_hazard();
+		compare_change_hazard();
 		if (c0_compare_int_pending())
 			return 0;
 	}
@ -196,7 +134,7 @@ static int c0_compare_int_usable(void)
 		cnt = read_c0_count();
 		cnt += delta;
 		write_c0_compare(cnt);
-		irq_disable_hazard();
+		compare_change_hazard();
 		if ((int)(read_c0_count() - cnt) < 0)
 		    break;
 		/* increase delta if the timer was already expired */
@ -205,11 +143,12 @@ static int c0_compare_int_usable(void)
 	while ((int)(read_c0_count() - cnt) <= 0)
 		;	/* Wait for expiry  */

+	compare_change_hazard();
 	if (!c0_compare_int_pending())
 		return 0;

 	write_c0_compare(read_c0_count());
-	irq_disable_hazard();
+	compare_change_hazard();
 	if (c0_compare_int_pending())
 		return 0;

@ -219,6 +158,8 @@ static int c0_compare_int_usable(void)
 	return 1;
 }

+#ifndef CONFIG_MIPS_MT_SMTC
+
 int __cpuinit mips_clockevent_init(void)
 {
 	uint64_t mips_freq = mips_hpt_frequency;
@ -229,17 +170,6 @@ int __cpuinit mips_clockevent_init(void)
 	if (!cpu_has_counter || !mips_hpt_frequency)
 		return -ENXIO;

-#ifdef CONFIG_MIPS_MT_SMTC
-	setup_smtc_dummy_clockevent_device();
-
-	/*
-	 * On SMTC we only register VPE0's compare interrupt as clockevent
-	 * device.
-	 */
-	if (cpu)
-		return 0;
-#endif
-
 	if (!c0_compare_int_usable())
 		return -ENXIO;

@ -265,13 +195,9 @@ int __cpuinit mips_clockevent_init(void)

 	cd->rating		= 300;
 	cd->irq			= irq;
-#ifdef CONFIG_MIPS_MT_SMTC
-	cd->cpumask		= CPU_MASK_ALL;
-#else
 	cd->cpumask		= cpumask_of_cpu(cpu);
-#endif
 	cd->set_next_event	= mips_next_event;
-	cd->set_mode		= mips_set_mode;
+	cd->set_mode		= mips_set_clock_mode;
 	cd->event_handler	= mips_event_handler;

 	clockevents_register_device(cd);
@ -281,12 +207,9 @@ int __cpuinit mips_clockevent_init(void)

 	cp0_timer_irq_installed = 1;

-#ifdef CONFIG_MIPS_MT_SMTC
-#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq)
-	setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT);
-#else
 	setup_irq(irq, &c0_compare_irqaction);
-#endif

 	return 0;
 }
+
+#endif /* Not CONFIG_MIPS_MT_SMTC */
--- a/arch/mips/kernel/cevt-smtc.c
+++ b/arch/mips/kernel/cevt-smtc.c
@ -0,0 +1,321 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2008 Kevin D. Kissell, Paralogos sarl
+ */
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+
+#include <asm/smtc_ipi.h>
+#include <asm/time.h>
+#include <asm/cevt-r4k.h>
+
+/*
+ * Variant clock event timer support for SMTC on MIPS 34K, 1004K
+ * or other MIPS MT cores.
+ *
+ * Notes on SMTC Support:
+ *
+ * SMTC has multiple microthread TCs pretending to be Linux CPUs.
+ * But there's only one Count/Compare pair per VPE, and Compare
+ * interrupts are taken opportunisitically by available TCs
+ * bound to the VPE with the Count register.  The new timer
+ * framework provides for global broadcasts, but we really
+ * want VPE-level multicasts for best behavior. So instead
+ * of invoking the high-level clock-event broadcast code,
+ * this version of SMTC support uses the historical SMTC
+ * multicast mechanisms "under the hood", appearing to the
+ * generic clock layer as if the interrupts are per-CPU.
+ *
+ * The approach taken here is to maintain a set of NR_CPUS
+ * virtual timers, and track which "CPU" needs to be alerted
+ * at each event.
+ *
+ * It's unlikely that we'll see a MIPS MT core with more than
+ * 2 VPEs, but we *know* that we won't need to handle more
+ * VPEs than we have "CPUs".  So NCPUs arrays of NCPUs elements
+ * is always going to be overkill, but always going to be enough.
+ */
+
+unsigned long smtc_nexttime[NR_CPUS][NR_CPUS];
+static int smtc_nextinvpe[NR_CPUS];
+
+/*
+ * Timestamps stored are absolute values to be programmed
+ * into Count register.  Valid timestamps will never be zero.
+ * If a Zero Count value is actually calculated, it is converted
+ * to be a 1, which will introduce 1 or two CPU cycles of error
+ * roughly once every four billion events, which at 1000 HZ means
+ * about once every 50 days.  If that's actually a problem, one
+ * could alternate squashing 0 to 1 and to -1.
+ */
+
+#define MAKEVALID(x) (((x) == 0L) ? 1L : (x))
+#define ISVALID(x) ((x) != 0L)
+
+/*
+ * Time comparison is subtle, as it's really truncated
+ * modular arithmetic.
+ */
+
+#define IS_SOONER(a, b, reference) \
+    (((a) - (unsigned long)(reference)) < ((b) - (unsigned long)(reference)))
+
+/*
+ * CATCHUP_INCREMENT, used when the function falls behind the counter.
+ * Could be an increasing function instead of a constant;
+ */
+
+#define CATCHUP_INCREMENT 64
+
+static int mips_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	unsigned long flags;
+	unsigned int mtflags;
+	unsigned long timestamp, reference, previous;
+	unsigned long nextcomp = 0L;
+	int vpe = current_cpu_data.vpe_id;
+	int cpu = smp_processor_id();
+	local_irq_save(flags);
+	mtflags = dmt();
+
+	/*
+	 * Maintain the per-TC virtual timer
+	 * and program the per-VPE shared Count register
+	 * as appropriate here...
+	 */
+	reference = (unsigned long)read_c0_count();
+	timestamp = MAKEVALID(reference + delta);
+	/*
+	 * To really model the clock, we have to catch the case
+	 * where the current next-in-VPE timestamp is the old
+	 * timestamp for the calling CPE, but the new value is
+	 * in fact later.  In that case, we have to do a full
+	 * scan and discover the new next-in-VPE CPU id and
+	 * timestamp.
+	 */
+	previous = smtc_nexttime[vpe][cpu];
+	if (cpu == smtc_nextinvpe[vpe] && ISVALID(previous)
+	    && IS_SOONER(previous, timestamp, reference)) {
+		int i;
+		int soonest = cpu;
+
+		/*
+		 * Update timestamp array here, so that new
+		 * value gets considered along with those of
+		 * other virtual CPUs on the VPE.
+		 */
+		smtc_nexttime[vpe][cpu] = timestamp;
+		for_each_online_cpu(i) {
+			if (ISVALID(smtc_nexttime[vpe][i])
+			    && IS_SOONER(smtc_nexttime[vpe][i],
+				smtc_nexttime[vpe][soonest], reference)) {
+				    soonest = i;
+			}
+		}
+		smtc_nextinvpe[vpe] = soonest;
+		nextcomp = smtc_nexttime[vpe][soonest];
+	/*
+	 * Otherwise, we don't have to process the whole array rank,
+	 * we just have to see if the event horizon has gotten closer.
+	 */
+	} else {
+		if (!ISVALID(smtc_nexttime[vpe][smtc_nextinvpe[vpe]]) ||
+		    IS_SOONER(timestamp,
+			smtc_nexttime[vpe][smtc_nextinvpe[vpe]], reference)) {
+			    smtc_nextinvpe[vpe] = cpu;
+			    nextcomp = timestamp;
+		}
+		/*
+		 * Since next-in-VPE may me the same as the executing
+		 * virtual CPU, we update the array *after* checking
+		 * its value.
+		 */
+		smtc_nexttime[vpe][cpu] = timestamp;
+	}
+
+	/*
+	 * It may be that, in fact, we don't need to update Compare,
+	 * but if we do, we want to make sure we didn't fall into
+	 * a crack just behind Count.
+	 */
+	if (ISVALID(nextcomp)) {
+		write_c0_compare(nextcomp);
+		ehb();
+		/*
+		 * We never return an error, we just make sure
+		 * that we trigger the handlers as quickly as
+		 * we can if we fell behind.
+		 */
+		while ((nextcomp - (unsigned long)read_c0_count())
+			> (unsigned long)LONG_MAX) {
+			nextcomp += CATCHUP_INCREMENT;
+			write_c0_compare(nextcomp);
+			ehb();
+		}
+	}
+	emt(mtflags);
+	local_irq_restore(flags);
+	return 0;
+}
+
+
+void smtc_distribute_timer(int vpe)
+{
+	unsigned long flags;
+	unsigned int mtflags;
+	int cpu;
+	struct clock_event_device *cd;
+	unsigned long nextstamp = 0L;
+	unsigned long reference;
+
+
+repeat:
+	for_each_online_cpu(cpu) {
+	    /*
+	     * Find virtual CPUs within the current VPE who have
+	     * unserviced timer requests whose time is now past.
+	     */
+	    local_irq_save(flags);
+	    mtflags = dmt();
+	    if (cpu_data[cpu].vpe_id == vpe &&
+		ISVALID(smtc_nexttime[vpe][cpu])) {
+		reference = (unsigned long)read_c0_count();
+		if ((smtc_nexttime[vpe][cpu] - reference)
+			 > (unsigned long)LONG_MAX) {
+			    smtc_nexttime[vpe][cpu] = 0L;
+			    emt(mtflags);
+			    local_irq_restore(flags);
+			    /*
+			     * We don't send IPIs to ourself.
+			     */
+			    if (cpu != smp_processor_id()) {
+				smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
+			    } else {
+				cd = &per_cpu(mips_clockevent_device, cpu);
+				cd->event_handler(cd);
+			    }
+		} else {
+			/* Local to VPE but Valid Time not yet reached. */
+			if (!ISVALID(nextstamp) ||
+			    IS_SOONER(smtc_nexttime[vpe][cpu], nextstamp,
+			    reference)) {
+				smtc_nextinvpe[vpe] = cpu;
+				nextstamp = smtc_nexttime[vpe][cpu];
+			}
+			emt(mtflags);
+			local_irq_restore(flags);
+		}
+	    } else {
+		emt(mtflags);
+		local_irq_restore(flags);
+
+	    }
+	}
+	/* Reprogram for interrupt at next soonest timestamp for VPE */
+	if (ISVALID(nextstamp)) {
+		write_c0_compare(nextstamp);
+		ehb();
+		if ((nextstamp - (unsigned long)read_c0_count())
+			> (unsigned long)LONG_MAX)
+				goto repeat;
+	}
+}
+
+
+irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
+{
+	int cpu = smp_processor_id();
+
+	/* If we're running SMTC, we've got MIPS MT and therefore MIPS32R2 */
+	handle_perf_irq(1);
+
+	if (read_c0_cause() & (1 << 30)) {
+		/* Clear Count/Compare Interrupt */
+		write_c0_compare(read_c0_compare());
+		smtc_distribute_timer(cpu_data[cpu].vpe_id);
+	}
+	return IRQ_HANDLED;
+}
+
+
+int __cpuinit mips_clockevent_init(void)
+{
+	uint64_t mips_freq = mips_hpt_frequency;
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *cd;
+	unsigned int irq;
+	int i;
+	int j;
+
+	if (!cpu_has_counter || !mips_hpt_frequency)
+		return -ENXIO;
+	if (cpu == 0) {
+		for (i = 0; i < num_possible_cpus(); i++) {
+			smtc_nextinvpe[i] = 0;
+			for (j = 0; j < num_possible_cpus(); j++)
+				smtc_nexttime[i][j] = 0L;
+		}
+		/*
+		 * SMTC also can't have the usablility test
+		 * run by secondary TCs once Compare is in use.
+		 */
+		if (!c0_compare_int_usable())
+			return -ENXIO;
+	}
+
+	/*
+	 * With vectored interrupts things are getting platform specific.
+	 * get_c0_compare_int is a hook to allow a platform to return the
+	 * interrupt number of it's liking.
+	 */
+	irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+	if (get_c0_compare_int)
+		irq = get_c0_compare_int();
+
+	cd = &per_cpu(mips_clockevent_device, cpu);
+
+	cd->name		= "MIPS";
+	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
+
+	/* Calculate the min / max delta */
+	cd->mult	= div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
+	cd->shift		= 32;
+	cd->max_delta_ns	= clockevent_delta2ns(0x7fffffff, cd);
+	cd->min_delta_ns	= clockevent_delta2ns(0x300, cd);
+
+	cd->rating		= 300;
+	cd->irq			= irq;
+	cd->cpumask		= cpumask_of_cpu(cpu);
+	cd->set_next_event	= mips_next_event;
+	cd->set_mode		= mips_set_clock_mode;
+	cd->event_handler	= mips_event_handler;
+
+	clockevents_register_device(cd);
+
+	/*
+	 * On SMTC we only want to do the data structure
+	 * initialization and IRQ setup once.
+	 */
+	if (cpu)
+		return 0;
+	/*
+	 * And we need the hwmask associated with the c0_compare
+	 * vector to be initialized.
+	 */
+	irq_hwmask[irq] = (0x100 << cp0_compare_irq);
+	if (cp0_timer_irq_installed)
+		return 0;
+
+	cp0_timer_irq_installed = 1;
+
+	setup_irq(irq, &c0_compare_irqaction);
+
+	return 0;
+}
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@ -45,18 +45,7 @@ static void r39xx_wait(void)
 	local_irq_enable();
 }

-/*
- * There is a race when WAIT instruction executed with interrupt
- * enabled.
- * But it is implementation-dependent wheter the pipelie restarts when
- * a non-enabled interrupt is requested.
- */
-static void r4k_wait(void)
-{
-	__asm__("	.set	mips3			\n"
-		"	wait				\n"
-		"	.set	mips0			\n");
-}
+extern void r4k_wait(void);

 /*
 * This variant is preferable as it allows testing need_resched and going to
@ -65,14 +54,18 @@ static void r4k_wait(void)
 * interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
 * using this version a gamble.
 */
-static void r4k_wait_irqoff(void)
+void r4k_wait_irqoff(void)
 {
 	local_irq_disable();
 	if (!need_resched())
-		__asm__("	.set	mips3		\n"
+		__asm__("	.set	push		\n"
+			"	.set	mips3		\n"
 			"	wait			\n"
-			"	.set	mips0		\n");
+			"	.set	pop		\n");
 	local_irq_enable();
+	__asm__(" 	.globl __pastwait	\n"
+		"__pastwait:			\n");
+	return;
 }

 /*
@ -128,7 +121,7 @@ static int __init wait_disable(char *s)

 __setup("nowait", wait_disable);

-static inline void check_wait(void)
+void __init check_wait(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;

@ -242,7 +235,6 @@ static inline void check_errata(void)

 void __init check_bugs32(void)
 {
-	check_wait();
 	check_errata();
 }

--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@ -79,11 +79,6 @@ FEXPORT(syscall_exit)

 FEXPORT(restore_all)			# restore full frame
 #ifdef CONFIG_MIPS_MT_SMTC
-/* Detect and execute deferred IPI "interrupts" */
-	LONG_L	s0, TI_REGS($28)
-	LONG_S	sp, TI_REGS($28)
-	jal	deferred_smtc_ipi
-	LONG_S	s0, TI_REGS($28)
 #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
 /* Re-arm any temporarily masked interrupts not explicitly "acked" */
 	mfc0	v0, CP0_TCSTATUS
@ -112,6 +107,11 @@ FEXPORT(restore_all)			# restore full frame
 	xor	t0, t0, t3
 	mtc0	t0, CP0_TCCONTEXT
 #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
+/* Detect and execute deferred IPI "interrupts" */
+	LONG_L	s0, TI_REGS($28)
+	LONG_S	sp, TI_REGS($28)
+	jal	deferred_smtc_ipi
+	LONG_S	s0, TI_REGS($28)
 #endif /* CONFIG_MIPS_MT_SMTC */
 	.set	noat
 	RESTORE_TEMP
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@ -20,6 +20,7 @@
 #include <asm/stackframe.h>
 #include <asm/war.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>

 #define PANIC_PIC(msg)					\
 		.set push;				\
@ -126,7 +127,42 @@ handle_vcei:

 	__FINIT

+	.align	5	/* 32 byte rollback region */
+LEAF(r4k_wait)
+	.set	push
+	.set	noreorder
+	/* start of rollback region */
+	LONG_L	t0, TI_FLAGS($28)
+	nop
+	andi	t0, _TIF_NEED_RESCHED
+	bnez	t0, 1f
+	 nop
+	nop
+	nop
+	.set	mips3
+	wait
+	/* end of rollback region (the region size must be power of two) */
+	.set	pop
+1:
+	jr	ra
+	END(r4k_wait)
+
+	.macro	BUILD_ROLLBACK_PROLOGUE handler
+	FEXPORT(rollback_\handler)
+	.set	push
+	.set	noat
+	MFC0	k0, CP0_EPC
+	PTR_LA	k1, r4k_wait
+	ori	k0, 0x1f	/* 32 byte rollback region */
+	xori	k0, 0x1f
+	bne	k0, k1, 9f
+	MTC0	k0, CP0_EPC
+9:
+	.set pop
+	.endm
+
 	.align  5
+BUILD_ROLLBACK_PROLOGUE handle_int
 NESTED(handle_int, PT_SIZE, sp)
 #ifdef CONFIG_TRACE_IRQFLAGS
 	/*
@ -201,6 +237,7 @@ NESTED(except_vec_ejtag_debug, 0, sp)
 * This prototype is copied to ebase + n*IntCtl.VS and patched
 * to invoke the handler
 */
+BUILD_ROLLBACK_PROLOGUE except_vec_vi
 NESTED(except_vec_vi, 0, sp)
 	SAVE_SOME
 	SAVE_AT
@ -245,8 +282,8 @@ NESTED(except_vec_vi_handler, 0, sp)
 	and	t0, a0, t1
 #ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
 	mfc0	t2, CP0_TCCONTEXT
-	or	t0, t0, t2
-	mtc0	t0, CP0_TCCONTEXT
+	or	t2, t0, t2
+	mtc0	t2, CP0_TCCONTEXT
 #endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
 	xor	t1, t1, t0
 	mtc0	t1, CP0_STATUS
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@ -22,6 +22,7 @@
 #include <asm/irqflags.h>
 #include <asm/regdef.h>
 #include <asm/page.h>
+#include <asm/pgtable-bits.h>
 #include <asm/mipsregs.h>
 #include <asm/stackframe.h>

--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@ -236,8 +236,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,

 		atomic_set(&kgdb_cpu_doing_single_step, -1);
 		if (remcom_in_buffer[0] == 's')
-			if (kgdb_contthread)
-				atomic_set(&kgdb_cpu_doing_single_step, cpu);
+			atomic_set(&kgdb_cpu_doing_single_step, cpu);

 		return 0;
 	}
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@ -159,7 +159,7 @@ __setup("fpaff=", fpaff_thresh);
 /*
 * FPU Use Factor empirically derived from experiments on 34K
 */
-#define FPUSEFACTOR 333
+#define FPUSEFACTOR 2000

 static __init int mt_fp_affinity_init(void)
 {
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@ -55,7 +55,7 @@ void __noreturn cpu_idle(void)
 	while (1) {
 		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
-#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
+#ifdef CONFIG_MIPS_MT_SMTC
 			extern void smtc_idle_loop_hook(void);

 			smtc_idle_loop_hook();
@ -145,17 +145,18 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	 */
 	p->thread.cp0_status = read_c0_status() & ~(ST0_CU2|ST0_CU1);
 	childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC restores TCStatus after Status, and the CU bits
+	 * are aliased there.
+	 */
+	childregs->cp0_tcstatus &= ~(ST0_CU2|ST0_CU1);
+#endif
 	clear_tsk_thread_flag(p, TIF_USEDFPU);

 #ifdef CONFIG_MIPS_MT_FPAFF
-	/*
-	 * FPU affinity support is cleaner if we track the
-	 * user-visible CPU affinity from the very beginning.
-	 * The generic cpus_allowed mask will already have
-	 * been copied from the parent before copy_thread
-	 * is invoked.
-	 */
-	p->thread.user_cpus_allowed = p->cpus_allowed;
+	clear_tsk_thread_flag(p, TIF_FPUBOUND);
 #endif /* CONFIG_MIPS_MT_FPAFF */

 	if (clone_flags & CLONE_SETTLS)
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@ -238,7 +238,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		case FPC_EIR: {	/* implementation / version register */
 			unsigned int flags;
 #ifdef CONFIG_MIPS_MT_SMTC
-			unsigned int irqflags;
+			unsigned long irqflags;
 			unsigned int mtflags;
 #endif /* CONFIG_MIPS_MT_SMTC */

--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@ -1,4 +1,21 @@
-/* Copyright (C) 2004 Mips Technologies, Inc */
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * Copyright (C) 2004 Mips Technologies, Inc
+ * Copyright (C) 2008 Kevin D. Kissell
+ */

 #include <linux/clockchips.h>
 #include <linux/kernel.h>
@ -21,7 +38,6 @@
 #include <asm/time.h>
 #include <asm/addrspace.h>
 #include <asm/smtc.h>
-#include <asm/smtc_ipi.h>
 #include <asm/smtc_proc.h>

 /*
@ -58,11 +74,6 @@ unsigned long irq_hwmask[NR_IRQS];

 asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];

-/*
- * Clock interrupt "latch" buffers, per "CPU"
- */
-
-static atomic_t ipi_timer_latch[NR_CPUS];

 /*
 * Number of InterProcessor Interrupt (IPI) message buffers to allocate
@ -70,7 +81,7 @@ static atomic_t ipi_timer_latch[NR_CPUS];

 #define IPIBUF_PER_CPU 4

-static struct smtc_ipi_q IPIQ[NR_CPUS];
+struct smtc_ipi_q IPIQ[NR_CPUS];
 static struct smtc_ipi_q freeIPIq;


@ -282,7 +293,7 @@ static void smtc_configure_tlb(void)
 * phys_cpu_present_map and the logical/physical mappings.
 */

-int __init mipsmt_build_cpu_map(int start_cpu_slot)
+int __init smtc_build_cpu_map(int start_cpu_slot)
 {
 	int i, ntcs;

@ -325,7 +336,12 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
 	write_tc_c0_tcstatus((read_tc_c0_tcstatus()
 			& ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT))
 			| TCSTATUS_A);
-	write_tc_c0_tccontext(0);
+	/*
+	 * TCContext gets an offset from the base of the IPIQ array
+	 * to be used in low-level code to detect the presence of
+	 * an active IPI queue
+	 */
+	write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
 	/* Bind tc to vpe */
 	write_tc_c0_tcbind(vpe);
 	/* In general, all TCs should have the same cpu_data indications */
@ -336,10 +352,18 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
 		cpu_data[cpu].options &= ~MIPS_CPU_FPU;
 	cpu_data[cpu].vpe_id = vpe;
 	cpu_data[cpu].tc_id = tc;
+	/* Multi-core SMTC hasn't been tested, but be prepared */
+	cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff;
 }

+/*
+ * Tweak to get Count registes in as close a sync as possible.
+ * Value seems good for 34K-class cores.
+ */

-void mipsmt_prepare_cpus(void)
+#define CP0_SKEW 8
+
+void smtc_prepare_cpus(int cpus)
 {
 	int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu;
 	unsigned long flags;
@ -363,13 +387,13 @@ void mipsmt_prepare_cpus(void)
 		IPIQ[i].head = IPIQ[i].tail = NULL;
 		spin_lock_init(&IPIQ[i].lock);
 		IPIQ[i].depth = 0;
-		atomic_set(&ipi_timer_latch[i], 0);
 	}

 	/* cpu_data index starts at zero */
 	cpu = 0;
 	cpu_data[cpu].vpe_id = 0;
 	cpu_data[cpu].tc_id = 0;
+	cpu_data[cpu].core = (read_c0_ebase() >> 1) & 0xff;
 	cpu++;

 	/* Report on boot-time options */
@ -484,7 +508,8 @@ void mipsmt_prepare_cpus(void)
 			write_vpe_c0_compare(0);
 			/* Propagate Config7 */
 			write_vpe_c0_config7(read_c0_config7());
-			write_vpe_c0_count(read_c0_count());
+			write_vpe_c0_count(read_c0_count() + CP0_SKEW);
+			ehb();
 		}
 		/* enable multi-threading within VPE */
 		write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE);
@ -556,7 +581,7 @@ void mipsmt_prepare_cpus(void)
 void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle)
 {
 	extern u32 kernelsp[NR_CPUS];
-	long flags;
+	unsigned long flags;
 	int mtflags;

 	LOCK_MT_PRA();
@ -585,24 +610,22 @@ void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle)

 void smtc_init_secondary(void)
 {
-	/*
-	 * Start timer on secondary VPEs if necessary.
-	 * plat_timer_setup has already have been invoked by init/main
-	 * on "boot" TC.  Like per_cpu_trap_init() hack, this assumes that
-	 * SMTC init code assigns TCs consdecutively and in ascending order
-	 * to across available VPEs.
-	 */
-	if (((read_c0_tcbind() & TCBIND_CURTC) != 0) &&
-	    ((read_c0_tcbind() & TCBIND_CURVPE)
-	    != cpu_data[smp_processor_id() - 1].vpe_id)){
-		write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
-	}
-
 	local_irq_enable();
 }

 void smtc_smp_finish(void)
 {
+	int cpu = smp_processor_id();
+
+	/*
+	 * Lowest-numbered CPU per VPE starts a clock tick.
+	 * Like per_cpu_trap_init() hack, this assumes that
+	 * SMTC init code assigns TCs consdecutively and
+	 * in ascending order across available VPEs.
+	 */
+	if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id))
+		write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
+
 	printk("TC %d going on-line as CPU %d\n",
 		cpu_data[smp_processor_id()].tc_id, smp_processor_id());
 }
@ -753,8 +776,10 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 {
 	int tcstatus;
 	struct smtc_ipi *pipi;
-	long flags;
+	unsigned long flags;
 	int mtflags;
+	unsigned long tcrestart;
+	extern void r4k_wait_irqoff(void), __pastwait(void);

 	if (cpu == smp_processor_id()) {
 		printk("Cannot Send IPI to self!\n");
@ -771,8 +796,6 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)
 	pipi->arg = (void *)action;
 	pipi->dest = cpu;
 	if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
-		if (type == SMTC_CLOCK_TICK)
-			atomic_inc(&ipi_timer_latch[cpu]);
 		/* If not on same VPE, enqueue and send cross-VPE interrupt */
 		smtc_ipi_nq(&IPIQ[cpu], pipi);
 		LOCK_CORE_PRA();
@ -800,22 +823,29 @@ void smtc_send_ipi(int cpu, int type, unsigned int action)

 		if ((tcstatus & TCSTATUS_IXMT) != 0) {
 			/*
-			 * Spin-waiting here can deadlock,
-			 * so we queue the message for the target TC.
+			 * If we're in the the irq-off version of the wait
+			 * loop, we need to force exit from the wait and
+			 * do a direct post of the IPI.
+			 */
+			if (cpu_wait == r4k_wait_irqoff) {
+				tcrestart = read_tc_c0_tcrestart();
+				if (tcrestart >= (unsigned long)r4k_wait_irqoff
+				    && tcrestart < (unsigned long)__pastwait) {
+					write_tc_c0_tcrestart(__pastwait);
+					tcstatus &= ~TCSTATUS_IXMT;
+					write_tc_c0_tcstatus(tcstatus);
+					goto postdirect;
+				}
+			}
+			/*
+			 * Otherwise we queue the message for the target TC
+			 * to pick up when he does a local_irq_restore()
 			 */
 			write_tc_c0_tchalt(0);
 			UNLOCK_CORE_PRA();
-			/* Try to reduce redundant timer interrupt messages */
-			if (type == SMTC_CLOCK_TICK) {
-			    if (atomic_postincrement(&ipi_timer_latch[cpu])!=0){
-				smtc_ipi_nq(&freeIPIq, pipi);
-				return;
-			    }
-			}
 			smtc_ipi_nq(&IPIQ[cpu], pipi);
 		} else {
-			if (type == SMTC_CLOCK_TICK)
-				atomic_inc(&ipi_timer_latch[cpu]);
+postdirect:
 			post_direct_ipi(cpu, pipi);
 			write_tc_c0_tchalt(0);
 			UNLOCK_CORE_PRA();
@ -883,7 +913,7 @@ static void ipi_call_interrupt(void)
 	smp_call_function_interrupt();
 }

-DECLARE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
+DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);

 void ipi_decode(struct smtc_ipi *pipi)
 {
@ -891,20 +921,13 @@ void ipi_decode(struct smtc_ipi *pipi)
 	struct clock_event_device *cd;
 	void *arg_copy = pipi->arg;
 	int type_copy = pipi->type;
-	int ticks;
-
 	smtc_ipi_nq(&freeIPIq, pipi);
 	switch (type_copy) {
 	case SMTC_CLOCK_TICK:
 		irq_enter();
 		kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + 1]++;
-		cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
-		ticks = atomic_read(&ipi_timer_latch[cpu]);
-		atomic_sub(ticks, &ipi_timer_latch[cpu]);
-		while (ticks) {
-			cd->event_handler(cd);
-			ticks--;
-		}
+		cd = &per_cpu(mips_clockevent_device, cpu);
+		cd->event_handler(cd);
 		irq_exit();
 		break;

@ -937,24 +960,48 @@ void ipi_decode(struct smtc_ipi *pipi)
 	}
 }

+/*
+ * Similar to smtc_ipi_replay(), but invoked from context restore,
+ * so it reuses the current exception frame rather than set up a
+ * new one with self_ipi.
+ */
+
 void deferred_smtc_ipi(void)
 {
-	struct smtc_ipi *pipi;
-	unsigned long flags;
-/* DEBUG */
-	int q = smp_processor_id();
+	int cpu = smp_processor_id();

 	/*
 	 * Test is not atomic, but much faster than a dequeue,
 	 * and the vast majority of invocations will have a null queue.
+	 * If irq_disabled when this was called, then any IPIs queued
+	 * after we test last will be taken on the next irq_enable/restore.
+	 * If interrupts were enabled, then any IPIs added after the
+	 * last test will be taken directly.
 	 */
-	if (IPIQ[q].head != NULL) {
-		while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) {
-			/* ipi_decode() should be called with interrupts off */
-			local_irq_save(flags);
+
+	while (IPIQ[cpu].head != NULL) {
+		struct smtc_ipi_q *q = &IPIQ[cpu];
+		struct smtc_ipi *pipi;
+		unsigned long flags;
+
+		/*
+		 * It may be possible we'll come in with interrupts
+		 * already enabled.
+		 */
+		local_irq_save(flags);
+
+		spin_lock(&q->lock);
+		pipi = __smtc_ipi_dq(q);
+		spin_unlock(&q->lock);
+		if (pipi != NULL)
 			ipi_decode(pipi);
-			local_irq_restore(flags);
-		}
+		/*
+		 * The use of the __raw_local restore isn't
+		 * as obviously necessary here as in smtc_ipi_replay(),
+		 * but it's more efficient, given that we're already
+		 * running down the IPI queue.
+		 */
+		__raw_local_irq_restore(flags);
 	}
 }

@ -975,7 +1022,7 @@ static irqreturn_t ipi_interrupt(int irq, void *dev_idm)
 	struct smtc_ipi *pipi;
 	unsigned long tcstatus;
 	int sent;
-	long flags;
+	unsigned long flags;
 	unsigned int mtflags;
 	unsigned int vpflags;

@ -1066,55 +1113,53 @@ static void setup_cross_vpe_interrupts(unsigned int nvpe)

 /*
 * SMTC-specific hacks invoked from elsewhere in the kernel.
- *
- * smtc_ipi_replay is called from raw_local_irq_restore which is only ever
- * called with interrupts disabled.  We do rely on interrupts being disabled
- * here because using spin_lock_irqsave()/spin_unlock_irqrestore() would
- * result in a recursive call to raw_local_irq_restore().
 */

-static void __smtc_ipi_replay(void)
+ /*
+  * smtc_ipi_replay is called from raw_local_irq_restore
+  */
+
+void smtc_ipi_replay(void)
 {
 	unsigned int cpu = smp_processor_id();

 	/*
 	 * To the extent that we've ever turned interrupts off,
 	 * we may have accumulated deferred IPIs.  This is subtle.
-	 * If we use the smtc_ipi_qdepth() macro, we'll get an
-	 * exact number - but we'll also disable interrupts
-	 * and create a window of failure where a new IPI gets
-	 * queued after we test the depth but before we re-enable
-	 * interrupts. So long as IXMT never gets set, however,
 	 * we should be OK:  If we pick up something and dispatch
 	 * it here, that's great. If we see nothing, but concurrent
 	 * with this operation, another TC sends us an IPI, IXMT
 	 * is clear, and we'll handle it as a real pseudo-interrupt
-	 * and not a pseudo-pseudo interrupt.
+	 * and not a pseudo-pseudo interrupt.  The important thing
+	 * is to do the last check for queued message *after* the
+	 * re-enabling of interrupts.
 	 */
-	if (IPIQ[cpu].depth > 0) {
-		while (1) {
-			struct smtc_ipi_q *q = &IPIQ[cpu];
-			struct smtc_ipi *pipi;
-			extern void self_ipi(struct smtc_ipi *);
+	while (IPIQ[cpu].head != NULL) {
+		struct smtc_ipi_q *q = &IPIQ[cpu];
+		struct smtc_ipi *pipi;
+		unsigned long flags;

-			spin_lock(&q->lock);
-			pipi = __smtc_ipi_dq(q);
-			spin_unlock(&q->lock);
-			if (!pipi)
-				break;
+		/*
+		 * It's just possible we'll come in with interrupts
+		 * already enabled.
+		 */
+		local_irq_save(flags);

+		spin_lock(&q->lock);
+		pipi = __smtc_ipi_dq(q);
+		spin_unlock(&q->lock);
+		/*
+		 ** But use a raw restore here to avoid recursion.
+		 */
+		__raw_local_irq_restore(flags);
+
+		if (pipi) {
 			self_ipi(pipi);
 			smtc_cpu_stats[cpu].selfipis++;
 		}
 	}
 }

-void smtc_ipi_replay(void)
-{
-	raw_local_irq_disable();
-	__smtc_ipi_replay();
-}
-
 EXPORT_SYMBOL(smtc_ipi_replay);

 void smtc_idle_loop_hook(void)
@ -1193,40 +1238,13 @@ void smtc_idle_loop_hook(void)
 		}
 	}

-	/*
-	 * Now that we limit outstanding timer IPIs, check for hung TC
-	 */
-	for (tc = 0; tc < NR_CPUS; tc++) {
-		/* Don't check ourself - we'll dequeue IPIs just below */
-		if ((tc != smp_processor_id()) &&
-		    atomic_read(&ipi_timer_latch[tc]) > timerq_limit) {
-		    if (clock_hang_reported[tc] == 0) {
-			pdb_msg += sprintf(pdb_msg,
-				"TC %d looks hung with timer latch at %d\n",
-				tc, atomic_read(&ipi_timer_latch[tc]));
-			clock_hang_reported[tc]++;
-			}
-		}
-	}
 	emt(mtflags);
 	local_irq_restore(flags);
 	if (pdb_msg != &id_ho_db_msg[0])
 		printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg);
 #endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */

-	/*
-	 * Replay any accumulated deferred IPIs. If "Instant Replay"
-	 * is in use, there should never be any.
-	 */
-#ifndef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY
-	{
-		unsigned long flags;
-
-		local_irq_save(flags);
-		__smtc_ipi_replay();
-		local_irq_restore(flags);
-	}
-#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */
+	smtc_ipi_replay();
 }

 void smtc_soft_dump(void)
@ -1242,10 +1260,6 @@ void smtc_soft_dump(void)
 		printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
 	}
 	smtc_ipi_qdump();
-	printk("Timer IPI Backlogs:\n");
-	for (i=0; i < NR_CPUS; i++) {
-		printk("%d: %d\n", i, atomic_read(&ipi_timer_latch[i]));
-	}
 	printk("%d Recoveries of \"stolen\" FPU\n",
 	       atomic_read(&smtc_fpu_recoveries));
 }
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@ -46,6 +46,9 @@
 #include <asm/types.h>
 #include <asm/stacktrace.h>

+extern void check_wait(void);
+extern asmlinkage void r4k_wait(void);
+extern asmlinkage void rollback_handle_int(void);
 extern asmlinkage void handle_int(void);
 extern asmlinkage void handle_tlbm(void);
 extern asmlinkage void handle_tlbl(void);
@ -822,8 +825,10 @@ static void mt_ase_fp_affinity(void)
 		if (cpus_intersects(current->cpus_allowed, mt_fpu_cpumask)) {
 			cpumask_t tmask;

-			cpus_and(tmask, current->thread.user_cpus_allowed,
-			         mt_fpu_cpumask);
+			current->thread.user_cpus_allowed
+				= current->cpus_allowed;
+			cpus_and(tmask, current->cpus_allowed,
+				mt_fpu_cpumask);
 			set_cpus_allowed(current, tmask);
 			set_thread_flag(TIF_FPUBOUND);
 		}
@ -1251,6 +1256,9 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)

 		extern char except_vec_vi, except_vec_vi_lui;
 		extern char except_vec_vi_ori, except_vec_vi_end;
+		extern char rollback_except_vec_vi;
+		char *vec_start = (cpu_wait == r4k_wait) ?
+			&rollback_except_vec_vi : &except_vec_vi;
 #ifdef CONFIG_MIPS_MT_SMTC
 		/*
 		 * We need to provide the SMTC vectored interrupt handler
@ -1258,11 +1266,11 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		 * Status.IM bit to be masked before going there.
 		 */
 		extern char except_vec_vi_mori;
-		const int mori_offset = &except_vec_vi_mori - &except_vec_vi;
+		const int mori_offset = &except_vec_vi_mori - vec_start;
 #endif /* CONFIG_MIPS_MT_SMTC */
-		const int handler_len = &except_vec_vi_end - &except_vec_vi;
-		const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
-		const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
+		const int handler_len = &except_vec_vi_end - vec_start;
+		const int lui_offset = &except_vec_vi_lui - vec_start;
+		const int ori_offset = &except_vec_vi_ori - vec_start;

 		if (handler_len > VECTORSPACING) {
 			/*
@ -1272,7 +1280,7 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 			panic("VECTORSPACING too small");
 		}

-		memcpy(b, &except_vec_vi, handler_len);
+		memcpy(b, vec_start, handler_len);
 #ifdef CONFIG_MIPS_MT_SMTC
 		BUG_ON(n > 7);	/* Vector index %d exceeds SMTC maximum. */

@ -1554,6 +1562,10 @@ void __init trap_init(void)
 	extern char except_vec3_generic, except_vec3_r4000;
 	extern char except_vec4;
 	unsigned long i;
+	int rollback;
+
+	check_wait();
+	rollback = (cpu_wait == r4k_wait);

 #if defined(CONFIG_KGDB)
 	if (kgdb_early_setup)
@ -1618,7 +1630,7 @@ void __init trap_init(void)
 	if (board_be_init)
 		board_be_init();

-	set_except_vector(0, handle_int);
+	set_except_vector(0, rollback ? rollback_handle_int : handle_int);
 	set_except_vector(1, handle_tlbm);
 	set_except_vector(2, handle_tlbl);
 	set_except_vector(3, handle_tlbs);
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@ -36,6 +36,7 @@ SECTIONS
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		*(.text.*)
 		*(.fixup)
 		*(.gnu.warning)
 	} :text = 0
--- a/arch/mips/lib/csum_partial.S
+++ b/arch/mips/lib/csum_partial.S
@ -39,12 +39,14 @@
 #ifdef USE_DOUBLE

 #define LOAD   ld
+#define LOAD32 lwu
 #define ADD    daddu
 #define NBYTES 8

 #else

 #define LOAD   lw
+#define LOAD32 lw
 #define ADD    addu
 #define NBYTES 4

@ -60,6 +62,14 @@
 	ADD	sum, v1;					\
 	.set	pop

+#define ADDC32(sum,reg)						\
+	.set	push;						\
+	.set	noat;						\
+	addu	sum, reg;					\
+	sltu	v1, sum, reg;					\
+	addu	sum, v1;					\
+	.set	pop
+
 #define CSUM_BIGCHUNK1(src, offset, sum, _t0, _t1, _t2, _t3)	\
 	LOAD	_t0, (offset + UNIT(0))(src);			\
 	LOAD	_t1, (offset + UNIT(1))(src);			\
@ -132,7 +142,7 @@ LEAF(csum_partial)
 	beqz	t8, .Lqword_align
 	 andi	t8, src, 0x8

-	lw	t0, 0x00(src)
+	LOAD32	t0, 0x00(src)
 	LONG_SUBU	a1, a1, 0x4
 	ADDC(sum, t0)
 	PTR_ADDU	src, src, 0x4
@ -211,7 +221,7 @@ LEAF(csum_partial)
 	LONG_SRL	t8, t8, 0x2

 .Lend_words:
-	lw	t0, (src)
+	LOAD32	t0, (src)
 	LONG_SUBU	t8, t8, 0x1
 	ADDC(sum, t0)
 	.set	reorder				/* DADDI_WAR */
@ -230,6 +240,9 @@ LEAF(csum_partial)
 	/* Still a full word to go  */
 	ulw	t1, (src)
 	PTR_ADDIU	src, 4
+#ifdef USE_DOUBLE
+	dsll	t1, t1, 32			/* clear lower 32bit */
+#endif
 	ADDC(sum, t1)

 1:	move	t1, zero
@ -280,7 +293,7 @@ LEAF(csum_partial)
 1:
 	.set	reorder
 	/* Add the passed partial csum.  */
-	ADDC(sum, a2)
+	ADDC32(sum, a2)
 	jr	ra
 	.set	noreorder
 	END(csum_partial)
@ -681,7 +694,7 @@ EXC(	sb	t0, NBYTES-2(dst), .Ls_exc)
 	.set	pop
 1:
 	.set reorder
-	ADDC(sum, psum)
+	ADDC32(sum, psum)
 	jr	ra
 	.set noreorder

--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@ -15,6 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK)	+= malta-console.o
 obj-$(CONFIG_PCI)		+= malta-pci.o

 # FIXME FIXME FIXME
-obj-$(CONFIG_MIPS_MT_SMTC)	+= malta_smtc.o
+obj-$(CONFIG_MIPS_MT_SMTC)	+= malta-smtc.o

 EXTRA_CFLAGS += -Werror
--- a/arch/mips/mti-malta/malta-smtc.c
+++ b/arch/mips/mti-malta/malta-smtc.c
@ -84,12 +84,17 @@ static void msmtc_cpus_done(void)

 static void __init msmtc_smp_setup(void)
 {
-	mipsmt_build_cpu_map(0);
+	/*
+	 * we won't get the definitive value until
+	 * we've run smtc_prepare_cpus later, but
+	 * we would appear to need an upper bound now.
+	 */
+	smp_num_siblings = smtc_build_cpu_map(0);
 }

 static void __init msmtc_prepare_cpus(unsigned int max_cpus)
 {
-	mipsmt_prepare_cpus();
+	smtc_prepare_cpus(max_cpus);
 }

 struct plat_smp_ops msmtc_smp_ops = {
--- a/Показать больше
+++ b/Показать больше