usb: musb: introduce DA8xx/OMAP-L1x glue layer
Texas Instruments DA8xx/OMAP-L1x glue layer for the MUSBMHRDC driver. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Yadviga Grigorieva <yadviga@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Sergei Shtylyov
Greg Kroah-Hartman
Родитель
d613746d8b
Коммит
3ee076dea6
|
|
@ -45,6 +45,9 @@ config USB_MUSB_SOC
|
|||
comment "DaVinci 35x and 644x USB support"
|
||||
depends on USB_MUSB_HDRC && ARCH_DAVINCI_DMx
|
||||
|
||||
comment "DA8xx/OMAP-L1x USB support"
|
||||
depends on USB_MUSB_HDRC && ARCH_DAVINCI_DA8XX
|
||||
|
||||
comment "OMAP 243x high speed USB support"
|
||||
depends on USB_MUSB_HDRC && ARCH_OMAP2430
|
||||
|
||||
|
|
@ -144,7 +147,7 @@ config USB_MUSB_HDRC_HCD
|
|||
config MUSB_PIO_ONLY
|
||||
bool 'Disable DMA (always use PIO)'
|
||||
depends on USB_MUSB_HDRC
|
||||
default y if USB_TUSB6010
|
||||
default USB_TUSB6010 || ARCH_DAVINCI_DA8XX
|
||||
help
|
||||
All data is copied between memory and FIFO by the CPU.
|
||||
DMA controllers are ignored.
|
||||
|
|
|
|||
|
|
@ -10,6 +10,10 @@ ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
|
|||
musb_hdrc-objs += davinci.o
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y)
|
||||
musb_hdrc-objs += da8xx.o
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_USB_TUSB6010),y)
|
||||
musb_hdrc-objs += tusb6010.o
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -0,0 +1,469 @@
|
|||
/*
|
||||
* Texas Instruments DA8xx/OMAP-L1x "glue layer"
|
||||
*
|
||||
* Copyright (c) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
|
||||
*
|
||||
* Based on the DaVinci "glue layer" code.
|
||||
* Copyright (C) 2005-2006 by Texas Instruments
|
||||
*
|
||||
* This file is part of the Inventra Controller Driver for Linux.
|
||||
*
|
||||
* The Inventra Controller Driver for Linux is free software; you
|
||||
* can redistribute it and/or modify it under the terms of the GNU
|
||||
* General Public License version 2 as published by the Free Software
|
||||
* Foundation.
|
||||
*
|
||||
* The Inventra Controller Driver for Linux is distributed in
|
||||
* the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
||||
* without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
|
||||
* License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with The Inventra Controller Driver for Linux ; if not,
|
||||
* write to the Free Software Foundation, Inc., 59 Temple Place,
|
||||
* Suite 330, Boston, MA 02111-1307 USA
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
#include <mach/da8xx.h>
|
||||
#include <mach/usb.h>
|
||||
|
||||
#include "musb_core.h"
|
||||
|
||||
/*
|
||||
* DA8XX specific definitions
|
||||
*/
|
||||
|
||||
/* USB 2.0 OTG module registers */
|
||||
#define DA8XX_USB_REVISION_REG 0x00
|
||||
#define DA8XX_USB_CTRL_REG 0x04
|
||||
#define DA8XX_USB_STAT_REG 0x08
|
||||
#define DA8XX_USB_EMULATION_REG 0x0c
|
||||
#define DA8XX_USB_MODE_REG 0x10 /* Transparent, CDC, [Generic] RNDIS */
|
||||
#define DA8XX_USB_AUTOREQ_REG 0x14
|
||||
#define DA8XX_USB_SRP_FIX_TIME_REG 0x18
|
||||
#define DA8XX_USB_TEARDOWN_REG 0x1c
|
||||
#define DA8XX_USB_INTR_SRC_REG 0x20
|
||||
#define DA8XX_USB_INTR_SRC_SET_REG 0x24
|
||||
#define DA8XX_USB_INTR_SRC_CLEAR_REG 0x28
|
||||
#define DA8XX_USB_INTR_MASK_REG 0x2c
|
||||
#define DA8XX_USB_INTR_MASK_SET_REG 0x30
|
||||
#define DA8XX_USB_INTR_MASK_CLEAR_REG 0x34
|
||||
#define DA8XX_USB_INTR_SRC_MASKED_REG 0x38
|
||||
#define DA8XX_USB_END_OF_INTR_REG 0x3c
|
||||
#define DA8XX_USB_GENERIC_RNDIS_EP_SIZE_REG(n) (0x50 + (((n) - 1) << 2))
|
||||
|
||||
/* Control register bits */
|
||||
#define DA8XX_SOFT_RESET_MASK 1
|
||||
|
||||
#define DA8XX_USB_TX_EP_MASK 0x1f /* EP0 + 4 Tx EPs */
|
||||
#define DA8XX_USB_RX_EP_MASK 0x1e /* 4 Rx EPs */
|
||||
|
||||
/* USB interrupt register bits */
|
||||
#define DA8XX_INTR_USB_SHIFT 16
|
||||
#define DA8XX_INTR_USB_MASK (0x1ff << DA8XX_INTR_USB_SHIFT) /* 8 Mentor */
|
||||
/* interrupts and DRVVBUS interrupt */
|
||||
#define DA8XX_INTR_DRVVBUS 0x100
|
||||
#define DA8XX_INTR_RX_SHIFT 8
|
||||
#define DA8XX_INTR_RX_MASK (DA8XX_USB_RX_EP_MASK << DA8XX_INTR_RX_SHIFT)
|
||||
#define DA8XX_INTR_TX_SHIFT 0
|
||||
#define DA8XX_INTR_TX_MASK (DA8XX_USB_TX_EP_MASK << DA8XX_INTR_TX_SHIFT)
|
||||
|
||||
#define DA8XX_MENTOR_CORE_OFFSET 0x400
|
||||
|
||||
#define CFGCHIP2 IO_ADDRESS(DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP2_REG)
|
||||
|
||||
/*
|
||||
* REVISIT (PM): we should be able to keep the PHY in low power mode most
|
||||
* of the time (24 MHz oscillator and PLL off, etc.) by setting POWER.D0
|
||||
* and, when in host mode, autosuspending idle root ports... PHY_PLLON
|
||||
* (overriding SUSPENDM?) then likely needs to stay off.
|
||||
*/
|
||||
|
||||
static inline void phy_on(void)
|
||||
{
|
||||
u32 cfgchip2 = __raw_readl(CFGCHIP2);
|
||||
|
||||
/*
|
||||
* Start the on-chip PHY and its PLL.
|
||||
*/
|
||||
cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN);
|
||||
cfgchip2 |= CFGCHIP2_PHY_PLLON;
|
||||
__raw_writel(cfgchip2, CFGCHIP2);
|
||||
|
||||
pr_info("Waiting for USB PHY clock good...\n");
|
||||
while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD))
|
||||
cpu_relax();
|
||||
}
|
||||
|
||||
static inline void phy_off(void)
|
||||
{
|
||||
u32 cfgchip2 = __raw_readl(CFGCHIP2);
|
||||
|
||||
/*
|
||||
* Ensure that USB 1.1 reference clock is not being sourced from
|
||||
* USB 2.0 PHY. Otherwise do not power down the PHY.
|
||||
*/
|
||||
if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX) &&
|
||||
(cfgchip2 & CFGCHIP2_USB1SUSPENDM)) {
|
||||
pr_warning("USB 1.1 clocked from USB 2.0 PHY -- "
|
||||
"can't power it down\n");
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* Power down the on-chip PHY.
|
||||
*/
|
||||
cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN;
|
||||
__raw_writel(cfgchip2, CFGCHIP2);
|
||||
}
|
||||
|
||||
/*
|
||||
* Because we don't set CTRL.UINT, it's "important" to:
|
||||
* - not read/write INTRUSB/INTRUSBE (except during
|
||||
* initial setup, as a workaround);
|
||||
* - use INTSET/INTCLR instead.
|
||||
*/
|
||||
|
||||
/**
|
||||
* musb_platform_enable - enable interrupts
|
||||
*/
|
||||
void musb_platform_enable(struct musb *musb)
|
||||
{
|
||||
void __iomem *reg_base = musb->ctrl_base;
|
||||
u32 mask;
|
||||
|
||||
/* Workaround: setup IRQs through both register sets. */
|
||||
mask = ((musb->epmask & DA8XX_USB_TX_EP_MASK) << DA8XX_INTR_TX_SHIFT) |
|
||||
((musb->epmask & DA8XX_USB_RX_EP_MASK) << DA8XX_INTR_RX_SHIFT) |
|
||||
DA8XX_INTR_USB_MASK;
|
||||
musb_writel(reg_base, DA8XX_USB_INTR_MASK_SET_REG, mask);
|
||||
|
||||
/* Force the DRVVBUS IRQ so we can start polling for ID change. */
|
||||
if (is_otg_enabled(musb))
|
||||
musb_writel(reg_base, DA8XX_USB_INTR_SRC_SET_REG,
|
||||
DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT);
|
||||
}
|
||||
|
||||
/**
|
||||
* musb_platform_disable - disable HDRC and flush interrupts
|
||||
*/
|
||||
void musb_platform_disable(struct musb *musb)
|
||||
{
|
||||
void __iomem *reg_base = musb->ctrl_base;
|
||||
|
||||
musb_writel(reg_base, DA8XX_USB_INTR_MASK_CLEAR_REG,
|
||||
DA8XX_INTR_USB_MASK |
|
||||
DA8XX_INTR_TX_MASK | DA8XX_INTR_RX_MASK);
|
||||
musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
|
||||
musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_USB_MUSB_HDRC_HCD
|
||||
#define portstate(stmt) stmt
|
||||
#else
|
||||
#define portstate(stmt)
|
||||
#endif
|
||||
|
||||
static void da8xx_set_vbus(struct musb *musb, int is_on)
|
||||
{
|
||||
WARN_ON(is_on && is_peripheral_active(musb));
|
||||
}
|
||||
|
||||
#define POLL_SECONDS 2
|
||||
|
||||
static struct timer_list otg_workaround;
|
||||
|
||||
static void otg_timer(unsigned long _musb)
|
||||
{
|
||||
struct musb *musb = (void *)_musb;
|
||||
void __iomem *mregs = musb->mregs;
|
||||
u8 devctl;
|
||||
unsigned long flags;
|
||||
|
||||
/*
|
||||
* We poll because DaVinci's won't expose several OTG-critical
|
||||
* status change events (from the transceiver) otherwise.
|
||||
*/
|
||||
devctl = musb_readb(mregs, MUSB_DEVCTL);
|
||||
DBG(7, "Poll devctl %02x (%s)\n", devctl, otg_state_string(musb));
|
||||
|
||||
spin_lock_irqsave(&musb->lock, flags);
|
||||
switch (musb->xceiv->state) {
|
||||
case OTG_STATE_A_WAIT_BCON:
|
||||
devctl &= ~MUSB_DEVCTL_SESSION;
|
||||
musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
|
||||
|
||||
devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
|
||||
if (devctl & MUSB_DEVCTL_BDEVICE) {
|
||||
musb->xceiv->state = OTG_STATE_B_IDLE;
|
||||
MUSB_DEV_MODE(musb);
|
||||
} else {
|
||||
musb->xceiv->state = OTG_STATE_A_IDLE;
|
||||
MUSB_HST_MODE(musb);
|
||||
}
|
||||
break;
|
||||
case OTG_STATE_A_WAIT_VFALL:
|
||||
/*
|
||||
* Wait till VBUS falls below SessionEnd (~0.2 V); the 1.3
|
||||
* RTL seems to mis-handle session "start" otherwise (or in
|
||||
* our case "recover"), in routine "VBUS was valid by the time
|
||||
* VBUSERR got reported during enumeration" cases.
|
||||
*/
|
||||
if (devctl & MUSB_DEVCTL_VBUS) {
|
||||
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
|
||||
break;
|
||||
}
|
||||
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
|
||||
musb_writel(musb->ctrl_base, DA8XX_USB_INTR_SRC_SET_REG,
|
||||
MUSB_INTR_VBUSERROR << DA8XX_INTR_USB_SHIFT);
|
||||
break;
|
||||
case OTG_STATE_B_IDLE:
|
||||
if (!is_peripheral_enabled(musb))
|
||||
break;
|
||||
|
||||
/*
|
||||
* There's no ID-changed IRQ, so we have no good way to tell
|
||||
* when to switch to the A-Default state machine (by setting
|
||||
* the DEVCTL.Session bit).
|
||||
*
|
||||
* Workaround: whenever we're in B_IDLE, try setting the
|
||||
* session flag every few seconds. If it works, ID was
|
||||
* grounded and we're now in the A-Default state machine.
|
||||
*
|
||||
* NOTE: setting the session flag is _supposed_ to trigger
|
||||
* SRP but clearly it doesn't.
|
||||
*/
|
||||
musb_writeb(mregs, MUSB_DEVCTL, devctl | MUSB_DEVCTL_SESSION);
|
||||
devctl = musb_readb(mregs, MUSB_DEVCTL);
|
||||
if (devctl & MUSB_DEVCTL_BDEVICE)
|
||||
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
|
||||
else
|
||||
musb->xceiv->state = OTG_STATE_A_IDLE;
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
spin_unlock_irqrestore(&musb->lock, flags);
|
||||
}
|
||||
|
||||
void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
|
||||
{
|
||||
static unsigned long last_timer;
|
||||
|
||||
if (!is_otg_enabled(musb))
|
||||
return;
|
||||
|
||||
if (timeout == 0)
|
||||
timeout = jiffies + msecs_to_jiffies(3);
|
||||
|
||||
/* Never idle if active, or when VBUS timeout is not set as host */
|
||||
if (musb->is_active || (musb->a_wait_bcon == 0 &&
|
||||
musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
|
||||
DBG(4, "%s active, deleting timer\n", otg_state_string(musb));
|
||||
del_timer(&otg_workaround);
|
||||
last_timer = jiffies;
|
||||
return;
|
||||
}
|
||||
|
||||
if (time_after(last_timer, timeout) && timer_pending(&otg_workaround)) {
|
||||
DBG(4, "Longer idle timer already pending, ignoring...\n");
|
||||
return;
|
||||
}
|
||||
last_timer = timeout;
|
||||
|
||||
DBG(4, "%s inactive, starting idle timer for %u ms\n",
|
||||
otg_state_string(musb), jiffies_to_msecs(timeout - jiffies));
|
||||
mod_timer(&otg_workaround, timeout);
|
||||
}
|
||||
|
||||
static irqreturn_t da8xx_interrupt(int irq, void *hci)
|
||||
{
|
||||
struct musb *musb = hci;
|
||||
void __iomem *reg_base = musb->ctrl_base;
|
||||
unsigned long flags;
|
||||
irqreturn_t ret = IRQ_NONE;
|
||||
u32 status;
|
||||
|
||||
spin_lock_irqsave(&musb->lock, flags);
|
||||
|
||||
/*
|
||||
* NOTE: DA8XX shadows the Mentor IRQs. Don't manage them through
|
||||
* the Mentor registers (except for setup), use the TI ones and EOI.
|
||||
*/
|
||||
|
||||
/* Acknowledge and handle non-CPPI interrupts */
|
||||
status = musb_readl(reg_base, DA8XX_USB_INTR_SRC_MASKED_REG);
|
||||
if (!status)
|
||||
goto eoi;
|
||||
|
||||
musb_writel(reg_base, DA8XX_USB_INTR_SRC_CLEAR_REG, status);
|
||||
DBG(4, "USB IRQ %08x\n", status);
|
||||
|
||||
musb->int_rx = (status & DA8XX_INTR_RX_MASK) >> DA8XX_INTR_RX_SHIFT;
|
||||
musb->int_tx = (status & DA8XX_INTR_TX_MASK) >> DA8XX_INTR_TX_SHIFT;
|
||||
musb->int_usb = (status & DA8XX_INTR_USB_MASK) >> DA8XX_INTR_USB_SHIFT;
|
||||
|
||||
/*
|
||||
* DRVVBUS IRQs are the only proxy we have (a very poor one!) for
|
||||
* DA8xx's missing ID change IRQ. We need an ID change IRQ to
|
||||
* switch appropriately between halves of the OTG state machine.
|
||||
* Managing DEVCTL.Session per Mentor docs requires that we know its
|
||||
* value but DEVCTL.BDevice is invalid without DEVCTL.Session set.
|
||||
* Also, DRVVBUS pulses for SRP (but not at 5 V)...
|
||||
*/
|
||||
if (status & (DA8XX_INTR_DRVVBUS << DA8XX_INTR_USB_SHIFT)) {
|
||||
int drvvbus = musb_readl(reg_base, DA8XX_USB_STAT_REG);
|
||||
void __iomem *mregs = musb->mregs;
|
||||
u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
|
||||
int err;
|
||||
|
||||
err = is_host_enabled(musb) && (musb->int_usb &
|
||||
MUSB_INTR_VBUSERROR);
|
||||
if (err) {
|
||||
/*
|
||||
* The Mentor core doesn't debounce VBUS as needed
|
||||
* to cope with device connect current spikes. This
|
||||
* means it's not uncommon for bus-powered devices
|
||||
* to get VBUS errors during enumeration.
|
||||
*
|
||||
* This is a workaround, but newer RTL from Mentor
|
||||
* seems to allow a better one: "re"-starting sessions
|
||||
* without waiting for VBUS to stop registering in
|
||||
* devctl.
|
||||
*/
|
||||
musb->int_usb &= ~MUSB_INTR_VBUSERROR;
|
||||
musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
|
||||
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
|
||||
WARNING("VBUS error workaround (delay coming)\n");
|
||||
} else if (is_host_enabled(musb) && drvvbus) {
|
||||
MUSB_HST_MODE(musb);
|
||||
musb->xceiv->default_a = 1;
|
||||
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
|
||||
portstate(musb->port1_status |= USB_PORT_STAT_POWER);
|
||||
del_timer(&otg_workaround);
|
||||
} else {
|
||||
musb->is_active = 0;
|
||||
MUSB_DEV_MODE(musb);
|
||||
musb->xceiv->default_a = 0;
|
||||
musb->xceiv->state = OTG_STATE_B_IDLE;
|
||||
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
|
||||
}
|
||||
|
||||
DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
|
||||
drvvbus ? "on" : "off",
|
||||
otg_state_string(musb),
|
||||
err ? " ERROR" : "",
|
||||
devctl);
|
||||
ret = IRQ_HANDLED;
|
||||
}
|
||||
|
||||
if (musb->int_tx || musb->int_rx || musb->int_usb)
|
||||
ret |= musb_interrupt(musb);
|
||||
|
||||
eoi:
|
||||
/* EOI needs to be written for the IRQ to be re-asserted. */
|
||||
if (ret == IRQ_HANDLED || status)
|
||||
musb_writel(reg_base, DA8XX_USB_END_OF_INTR_REG, 0);
|
||||
|
||||
/* Poll for ID change */
|
||||
if (is_otg_enabled(musb) && musb->xceiv->state == OTG_STATE_B_IDLE)
|
||||
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
|
||||
|
||||
spin_unlock_irqrestore(&musb->lock, flags);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
|
||||
{
|
||||
u32 cfgchip2 = __raw_readl(CFGCHIP2);
|
||||
|
||||
cfgchip2 &= ~CFGCHIP2_OTGMODE;
|
||||
switch (musb_mode) {
|
||||
#ifdef CONFIG_USB_MUSB_HDRC_HCD
|
||||
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
|
||||
cfgchip2 |= CFGCHIP2_FORCE_HOST;
|
||||
break;
|
||||
#endif
|
||||
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
|
||||
case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
|
||||
cfgchip2 |= CFGCHIP2_FORCE_DEVICE;
|
||||
break;
|
||||
#endif
|
||||
#ifdef CONFIG_USB_MUSB_OTG
|
||||
case MUSB_OTG: /* Don't override the VBUS/ID comparators */
|
||||
cfgchip2 |= CFGCHIP2_NO_OVERRIDE;
|
||||
break;
|
||||
#endif
|
||||
default:
|
||||
DBG(2, "Trying to set unsupported mode %u\n", musb_mode);
|
||||
}
|
||||
|
||||
__raw_writel(cfgchip2, CFGCHIP2);
|
||||
return 0;
|
||||
}
|
||||
|
||||
int __init musb_platform_init(struct musb *musb, void *board_data)
|
||||
{
|
||||
void __iomem *reg_base = musb->ctrl_base;
|
||||
u32 rev;
|
||||
|
||||
musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
|
||||
|
||||
clk_enable(musb->clock);
|
||||
|
||||
/* Returns zero if e.g. not clocked */
|
||||
rev = musb_readl(reg_base, DA8XX_USB_REVISION_REG);
|
||||
if (!rev)
|
||||
goto fail;
|
||||
|
||||
usb_nop_xceiv_register();
|
||||
musb->xceiv = otg_get_transceiver();
|
||||
if (!musb->xceiv)
|
||||
goto fail;
|
||||
|
||||
if (is_host_enabled(musb))
|
||||
setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
|
||||
|
||||
musb->board_set_vbus = da8xx_set_vbus;
|
||||
|
||||
/* Reset the controller */
|
||||
musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK);
|
||||
|
||||
/* Start the on-chip PHY and its PLL. */
|
||||
phy_on();
|
||||
|
||||
msleep(5);
|
||||
|
||||
/* NOTE: IRQs are in mixed mode, not bypass to pure MUSB */
|
||||
pr_debug("DA8xx OTG revision %08x, PHY %03x, control %02x\n",
|
||||
rev, __raw_readl(CFGCHIP2),
|
||||
musb_readb(reg_base, DA8XX_USB_CTRL_REG));
|
||||
|
||||
musb->isr = da8xx_interrupt;
|
||||
return 0;
|
||||
fail:
|
||||
clk_disable(musb->clock);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
int musb_platform_exit(struct musb *musb)
|
||||
{
|
||||
if (is_host_enabled(musb))
|
||||
del_timer_sync(&otg_workaround);
|
||||
|
||||
phy_off();
|
||||
|
||||
otg_put_transceiver(musb->xceiv);
|
||||
usb_nop_xceiv_unregister();
|
||||
|
||||
clk_disable(musb->clock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -599,6 +599,7 @@ extern void musb_hnp_stop(struct musb *musb);
|
|||
extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
|
||||
|
||||
#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \
|
||||
defined(CONFIG_ARCH_DAVINCI_DA8XX) || \
|
||||
defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
|
||||
defined(CONFIG_ARCH_OMAP4)
|
||||
extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче