ASoC: davinci-mcasp: Extract DMA channels directly from DT

Extract DMA channels directly from DT as they can not be found from
platform resources anymore. This is a work-around until davinci audio
driver is updated to use dmaengine.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt

@@ -18,6 +18,11 @@ Required properties:
 - serial-dir : A list of serializer pin mode. The list number should be equal
 		to "num-serializer" parameter. Each entry is a number indication
 		serializer pin direction. (0 - INACTIVE, 1 - TX, 2 - RX)
+- dmas: two element list of DMA controller phandles and DMA request line
+        ordered pairs.
+- dma-names: identifier string for each DMA request line in the dmas property.
+	     These strings correspond 1:1 with the ordered pairs in dmas. The dma
+	     identifiers must be "rx" and "tx".
 
 Optional properties:
 

include/linux/platform_data/davinci_asp.h

@@ -84,6 +84,8 @@ struct snd_platform_data {
 	u8 version;
 	u8 txnumevt;
 	u8 rxnumevt;
+	int tx_dma_channel;
+	int rx_dma_channel;
 };
 
 enum {

sound/soc/davinci/davinci-mcasp.c

@@ -1047,6 +1047,7 @@ static struct snd_platform_data *davinci_mcasp_set_pdata_from_of(
 	struct snd_platform_data *pdata = NULL;
 	const struct of_device_id *match =
 			of_match_device(mcasp_dt_ids, &pdev->dev);
+	struct of_phandle_args dma_spec;
 
 	const u32 *of_serial_dir32;
 	u8 *of_serial_dir;
@@ -1109,6 +1110,28 @@ static struct snd_platform_data *davinci_mcasp_set_pdata_from_of(
 		pdata->serial_dir = of_serial_dir;
 	}
 
+	ret = of_property_match_string(np, "dma-names", "tx");
+	if (ret < 0)
+		goto nodata;
+
+	ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", ret,
+					 &dma_spec);
+	if (ret < 0)
+		goto nodata;
+
+	pdata->tx_dma_channel = dma_spec.args[0];
+
+	ret = of_property_match_string(np, "dma-names", "rx");
+	if (ret < 0)
+		goto nodata;
+
+	ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", ret,
+					 &dma_spec);
+	if (ret < 0)
+		goto nodata;
+
+	pdata->rx_dma_channel = dma_spec.args[0];
+
 	ret = of_property_read_u32(np, "tx-num-evt", &val);
 	if (ret >= 0)
 		pdata->txnumevt = val;
@@ -1213,15 +1236,11 @@ static int davinci_mcasp_probe(struct platform_device *pdev)
 	dma_data->sram_size = pdata->sram_size_playback;
 	dma_data->dma_addr = dat->start + pdata->tx_dma_offset;
 
-	/* first TX, then RX */
 	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "no DMA resource\n");
-		ret = -ENODEV;
-		goto err_release_clk;
-	}
-
-	dma_data->channel = res->start;
+	if (res)
+		dma_data->channel = res->start;
+	else
+		dma_data->channel = pdata->tx_dma_channel;
 
 	dma_data = &dev->dma_params[SNDRV_PCM_STREAM_CAPTURE];
 	dma_data->asp_chan_q = pdata->asp_chan_q;
@@ -1231,13 +1250,11 @@ static int davinci_mcasp_probe(struct platform_device *pdev)
 	dma_data->dma_addr = dat->start + pdata->rx_dma_offset;
 
 	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-	if (!res) {
-		dev_err(&pdev->dev, "no DMA resource\n");
-		ret = -ENODEV;
-		goto err_release_clk;
-	}
+	if (res)
+		dma_data->channel = res->start;
+	else
+		dma_data->channel = pdata->rx_dma_channel;
 
-	dma_data->channel = res->start;
 	dev_set_drvdata(&pdev->dev, dev);
 	ret = snd_soc_register_component(&pdev->dev, &davinci_mcasp_component,
 					 &davinci_mcasp_dai[pdata->op_mode], 1);