microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

MTD updates for 3.20-rc1 

NAND:
 
  * Add new Hisilicon NAND driver for Hip04
  * Add default reboot handler, to ensure all outstanding erase transactions
    complete in time
  * jz4740: convert to use GPIO descriptor API
  * Atmel: add support for sama5d4
  * Change default bitflip threshold to 75% of correction strength
  * Miscellaneous cleanups and bugfixes
 
 SPI NOR:
 
  * Freescale QuadSPI:
    - Fix a few probe() and remove() issues
    - Add a MAINTAINERS entry for this driver
    - Tweak transfer size to increase read performance
    - Add suspend/resume support
  * Add Micron quad I/O support
  * ST FSM SPI: miscellaneous fixes
 
 JFFS2:
 
  * gracefully handle corrupted 'offset' field found on flash
 
 Other:
 
  * bcm47xxpart: add tweaks for a few new devices
  * mtdconcat: set return lengths properly for mtd_write_oob()
  * map_ram: enable use with mtdoops
  * maps: support fallback to ROM/UBI for write-protected NOR flash
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU4qf2AAoJEFySrpd9RFgtmo4P/i7KD+Xx12SgBbO+ZUCqBJhh
 X+gorTFr0YpItdn53i1PA8t+WnnXi4BHY07Y8fCj/JL+lxzS+00156o+hsYAFWIl
 TVvjlFHxUYS/rh7plshd5kbEZunlXBOpWw2Qr4dSoIIuOChaRDm9eGNHJ75D/ImO
 Cr+83cyYAm0F+fCHavZKHUq/iFmpDcrt3vbPx/Rv51W+rs/HqPPUcKxt4iaL5Thk
 R0pkcaZHfJ+pkXfjkgRu/L35RLRVxRkycYvLlVSOyE/KqnzE1RRgFeHUYUiPeCem
 xUEoI0OqIYlR5LuKTt/NsBtz1W0Kcm3AcQDC5QliKnbGCwm9nbHAjqfraaZ4Ks2Z
 4YL/2pJCyJFT6NPjsiwiYkJOzJHvN8tLCSIQrXCtAKAkMn8YMHvWIEC/bVsAkpVq
 V3ke3gmZ8bY7sXyY+Fi5WVW4uxKCwSVtGiAw3i74v3z5hZZ818hkbtPc1J0CANiE
 iqbkLMJ5pvWuVT9V2qGlDqK1MDqNXNLXZgBfT9tJx/q5Ptitva79Ift4teRwery2
 5pD3uSaA3vJE2AGHKPfIyTDFqdDDUDCOWJIGbIKsYoKXSAmuOxuWKEhRMWeZMmjo
 o0ZOrhJqBNp4ZqvAxUddUOsGhRKNa3btPoB+IhAQG4+OBwxknsAY39BzPcBjKrkG
 iEKHgRDXXMe8W2wCalLw
 =+nRk
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "NAND:

   - Add new Hisilicon NAND driver for Hip04
   - Add default reboot handler, to ensure all outstanding erase
     transactions complete in time
   - jz4740: convert to use GPIO descriptor API
   - Atmel: add support for sama5d4
   - Change default bitflip threshold to 75% of correction strength
   - Miscellaneous cleanups and bugfixes

  SPI NOR:

   - Freescale QuadSPI:
   - Fix a few probe() and remove() issues
   - Add a MAINTAINERS entry for this driver
   - Tweak transfer size to increase read performance
   - Add suspend/resume support
   - Add Micron quad I/O support
   - ST FSM SPI: miscellaneous fixes

  JFFS2:

   - gracefully handle corrupted 'offset' field found on flash

  Other:

   - bcm47xxpart: add tweaks for a few new devices
   - mtdconcat: set return lengths properly for mtd_write_oob()
   - map_ram: enable use with mtdoops
   - maps: support fallback to ROM/UBI for write-protected NOR flash"

* tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd: (46 commits)
  mtd: hisilicon: && vs & typo
  jffs2: fix handling of corrupted summary length
  mtd: hisilicon: add device tree binding documentation
  mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc
  mtd: avoid registering reboot notifier twice
  mtd: concat: set the return lengths properly
  mtd: kconfig: replace PPC_OF with PPC
  mtd: denali: remove unnecessary stubs
  mtd: nand: remove redundant local variable
  MAINTAINERS: add maintainer entry for FREESCALE QUAD SPI driver
  mtd: fsl-quadspi: improve read performance by increase AHB transfer size
  mtd: fsl-quadspi: Remove unnecessary 'map_failed' label
  mtd: fsl-quadspi: Remove unneeded success/error messages
  mtd: fsl-quadspi: Fix the error paths
  mtd: nand: omap: drop condition with no effect
  mtd: nand: jz4740: Convert to GPIO descriptor API
  mtd: nand: Request strength instead of bytes for soft BCH
  mtd: nand: default bitflip-reporting threshold to 75% of correction strength
  mtd: atmel_nand: introduce a new compatible string for sama5d4 chip
  mtd: atmel_nand: return max bitflips in all sectors in pmecc_correction()
  ...
This commit is contained in:
Linus Torvalds 2015-02-18 08:01:44 -08:00
Родитель f5af19d10d eb928d40a9
Коммит 402521b8f7
35 изменённых файлов: 1385 добавлений и 214 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

2
Documentation/devicetree/bindings/mtd/atmel-nand.txt
Просмотреть файл

@ -1,7 +1,7 @@
Atmel NAND flash
Required properties:
- compatible : "atmel,at91rm9200-nand".
- compatible : should be "atmel,at91rm9200-nand" or "atmel,sama5d4-nand".
- reg : should specify localbus address and size used for the chip,
and hardware ECC controller if available.
If the hardware ECC is PMECC, it should contain address and size for

2
Documentation/devicetree/bindings/mtd/fsl-quadspi.txt
Просмотреть файл

@ -1,7 +1,7 @@
* Freescale Quad Serial Peripheral Interface(QuadSPI)
Required properties:
- compatible : Should be "fsl,vf610-qspi"
- compatible : Should be "fsl,vf610-qspi" or "fsl,imx6sx-qspi"
- reg : the first contains the register location and length,
the second contains the memory mapping address and length
- reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"

2
Documentation/devicetree/bindings/mtd/gpmi-nand.txt
Просмотреть файл

@ -1,7 +1,7 @@
* Freescale General-Purpose Media Interface (GPMI)
The GPMI nand controller provides an interface to control the
NAND flash chips. We support only one NAND chip now.
NAND flash chips.
Required properties:
- compatible : should be "fsl,<chip>-gpmi-nand"

47
Documentation/devicetree/bindings/mtd/hisi504-nand.txt Normal file
Просмотреть файл

@ -0,0 +1,47 @@
Hisilicon Hip04 Soc NAND controller DT binding
Required properties:
- compatible: Should be "hisilicon,504-nfc".
- reg: The first contains base physical address and size of
NAND controller's registers. The second contains base
physical address and size of NAND controller's buffer.
- interrupts: Interrupt number for nfc.
- nand-bus-width: See nand.txt.
- nand-ecc-mode: Support none and hw ecc mode.
- #address-cells: Partition address, should be set 1.
- #size-cells: Partition size, should be set 1.
Optional properties:
- nand-ecc-strength: Number of bits to correct per ECC step.
- nand-ecc-step-size: Number of data bytes covered by a single ECC step.
The following ECC strength and step size are currently supported:
- nand-ecc-strength = <16>, nand-ecc-step-size = <1024>
Flash chip may optionally contain additional sub-nodes describing partitions of
the address space. See partition.txt for more detail.
Example:
nand: nand@4020000 {
compatible = "hisilicon,504-nfc";
reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
interrupts = <0 379 4>;
nand-bus-width = <8>;
nand-ecc-mode = "hw";
nand-ecc-strength = <16>;
nand-ecc-step-size = <1024>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "nand_text";
reg = <0x00000000 0x00400000>;
};
...
};

5
Documentation/devicetree/bindings/mtd/mtd-physmap.txt
Просмотреть файл

@ -36,6 +36,11 @@ are defined:
- vendor-id : Contains the flash chip's vendor id (1 byte).
- device-id : Contains the flash chip's device id (1 byte).
For ROM compatible devices (and ROM fallback from cfi-flash), the following
additional (optional) property is defined:
- erase-size : The chip's physical erase block size in bytes.
The device tree may optionally contain sub-nodes describing partitions of the
address space. See partition.txt for more detail.

6
MAINTAINERS
Просмотреть файл

@ -4092,6 +4092,12 @@ S: Maintained
F: include/linux/platform_data/video-imxfb.h
F: drivers/video/fbdev/imxfb.c
FREESCALE QUAD SPI DRIVER
M: Han Xu <han.xu@freescale.com>
L: linux-mtd@lists.infradead.org
S: Maintained
F: drivers/mtd/spi-nor/fsl-quadspi.c
FREESCALE SOC FS_ENET DRIVER
M: Pantelis Antoniou <pantelis.antoniou@gmail.com>
M: Vitaly Bordug <vbordug@ru.mvista.com>

2
arch/mips/include/asm/mach-jz4740/jz4740_nand.h
Просмотреть файл

@ -27,8 +27,6 @@ struct jz_nand_platform_data {
struct nand_ecclayout *ecc_layout;
unsigned int busy_gpio;
unsigned char banks[JZ_NAND_NUM_BANKS];
void (*ident_callback)(struct platform_device *, struct nand_chip *,

11
arch/mips/jz4740/board-qi_lb60.c
Просмотреть файл

@ -140,10 +140,18 @@ static void qi_lb60_nand_ident(struct platform_device *pdev,
static struct jz_nand_platform_data qi_lb60_nand_pdata = {
.ident_callback = qi_lb60_nand_ident,
.busy_gpio = 94,
.banks = { 1 },
};
static struct gpiod_lookup_table qi_lb60_nand_gpio_table = {
.dev_id = "jz4740-nand.0",
.table = {
GPIO_LOOKUP("Bank C", 30, "busy", 0),
{ },
},
};
/* Keyboard*/
#define KEY_QI_QI KEY_F13
@ -472,6 +480,7 @@ static int __init qi_lb60_init_platform_devices(void)
jz4740_mmc_device.dev.platform_data = &qi_lb60_mmc_pdata;
gpiod_add_lookup_table(&qi_lb60_audio_gpio_table);
gpiod_add_lookup_table(&qi_lb60_nand_gpio_table);
jz4740_serial_device_register();

43
drivers/mtd/bcm47xxpart.c
Просмотреть файл

@ -15,6 +15,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <uapi/linux/magic.h>
/*
* NAND flash on Netgear R6250 was verified to contain 15 partitions.
* This will result in allocating too big array for some old devices, but the
@ -39,7 +41,8 @@
#define ML_MAGIC1 0x39685a42
#define ML_MAGIC2 0x26594131
#define TRX_MAGIC 0x30524448
#define SQSH_MAGIC 0x71736873 /* shsq */
#define SHSQ_MAGIC 0x71736873 /* shsq (weird ZTE H218N endianness) */
#define UBI_EC_MAGIC 0x23494255 /* UBI# */
struct trx_header {
uint32_t magic;
@ -50,7 +53,7 @@ struct trx_header {
uint32_t offset[3];
} __packed;
static void bcm47xxpart_add_part(struct mtd_partition *part, char *name,
static void bcm47xxpart_add_part(struct mtd_partition *part, const char *name,
u64 offset, uint32_t mask_flags)
{
part->name = name;
@ -58,6 +61,26 @@ static void bcm47xxpart_add_part(struct mtd_partition *part, char *name,
part->mask_flags = mask_flags;
}
static const char *bcm47xxpart_trx_data_part_name(struct mtd_info *master,
size_t offset)
{
uint32_t buf;
size_t bytes_read;
if (mtd_read(master, offset, sizeof(buf), &bytes_read,
(uint8_t *)&buf) < 0) {
pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
offset);
goto out_default;
}
if (buf == UBI_EC_MAGIC)
return "ubi";
out_default:
return "rootfs";
}
static int bcm47xxpart_parse(struct mtd_info *master,
struct mtd_partition **pparts,
struct mtd_part_parser_data *data)
@ -73,8 +96,12 @@ static int bcm47xxpart_parse(struct mtd_info *master,
int last_trx_part = -1;
int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
if (blocksize <= 0x10000)
blocksize = 0x10000;
/*
* Some really old flashes (like AT45DB*) had smaller erasesize-s, but
* partitions were aligned to at least 0x1000 anyway.
*/
if (blocksize < 0x1000)
blocksize = 0x1000;
/* Alloc */
parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
@ -186,8 +213,11 @@ static int bcm47xxpart_parse(struct mtd_info *master,
* we want to have jffs2 (overlay) in the same mtd.
*/
if (trx->offset[i]) {
const char *name;
name = bcm47xxpart_trx_data_part_name(master, offset + trx->offset[i]);
bcm47xxpart_add_part(&parts[curr_part++],
"rootfs",
name,
offset + trx->offset[i],
0);
i++;
@ -205,7 +235,8 @@ static int bcm47xxpart_parse(struct mtd_info *master,
}
/* Squashfs on devices not using TRX */
if (buf[0x000 / 4] == SQSH_MAGIC) {
if (le32_to_cpu(buf[0x000 / 4]) == SQUASHFS_MAGIC ||
buf[0x000 / 4] == SHSQ_MAGIC) {
bcm47xxpart_add_part(&parts[curr_part++], "rootfs",
offset, 0);
continue;

1
drivers/mtd/chips/map_ram.c
Просмотреть файл

@ -68,6 +68,7 @@ static struct mtd_info *map_ram_probe(struct map_info *map)
mtd->_get_unmapped_area = mapram_unmapped_area;
mtd->_read = mapram_read;
mtd->_write = mapram_write;
mtd->_panic_write = mapram_write;
mtd->_sync = mapram_nop;
mtd->flags = MTD_CAP_RAM;
mtd->writesize = 1;

13
drivers/mtd/chips/map_rom.c
Просмотреть файл

@ -11,6 +11,7 @@
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
@ -28,6 +29,15 @@ static struct mtd_chip_driver maprom_chipdrv = {
.module = THIS_MODULE
};
static unsigned int default_erasesize(struct map_info *map)
{
const __be32 *erase_size = NULL;
erase_size = of_get_property(map->device_node, "erase-size", NULL);
return !erase_size ? map->size : be32_to_cpu(*erase_size);
}
static struct mtd_info *map_rom_probe(struct map_info *map)
{
struct mtd_info *mtd;
@ -47,8 +57,9 @@ static struct mtd_info *map_rom_probe(struct map_info *map)
mtd->_sync = maprom_nop;
mtd->_erase = maprom_erase;
mtd->flags = MTD_CAP_ROM;
mtd->erasesize = map->size;
mtd->erasesize = default_erasesize(map);
mtd->writesize = 1;
mtd->writebufsize = 1;
__module_get(THIS_MODULE);
return mtd;

137
drivers/mtd/devices/st_spi_fsm.c
Просмотреть файл

@ -24,6 +24,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/clk.h>
#include "serial_flash_cmds.h"
@ -262,6 +263,7 @@ struct stfsm {
struct mtd_info mtd;
struct mutex lock;
struct flash_info *info;
struct clk *clk;
uint32_t configuration;
uint32_t fifo_dir_delay;
@ -663,6 +665,23 @@ static struct stfsm_seq stfsm_seq_write_status = {
SEQ_CFG_STARTSEQ),
};
/* Dummy sequence to read one byte of data from flash into the FIFO */
static const struct stfsm_seq stfsm_seq_load_fifo_byte = {
.data_size = TRANSFER_SIZE(1),
.seq_opc[0] = (SEQ_OPC_PADS_1 |
SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(SPINOR_OP_RDID)),
.seq = {
STFSM_INST_CMD1,
STFSM_INST_DATA_READ,
STFSM_INST_STOP,
},
.seq_cfg = (SEQ_CFG_PADS_1 |
SEQ_CFG_READNOTWRITE |
SEQ_CFG_CSDEASSERT |
SEQ_CFG_STARTSEQ),
};
static int stfsm_n25q_en_32bit_addr_seq(struct stfsm_seq *seq)
{
seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
@ -695,22 +714,6 @@ static inline uint32_t stfsm_fifo_available(struct stfsm *fsm)
return (readl(fsm->base + SPI_FAST_SEQ_STA) >> 5) & 0x7f;
}
static void stfsm_clear_fifo(struct stfsm *fsm)
{
uint32_t avail;
for (;;) {
avail = stfsm_fifo_available(fsm);
if (!avail)
break;
while (avail) {
readl(fsm->base + SPI_FAST_SEQ_DATA_REG);
avail--;
}
}
}
static inline void stfsm_load_seq(struct stfsm *fsm,
const struct stfsm_seq *seq)
{
@ -772,6 +775,68 @@ static void stfsm_read_fifo(struct stfsm *fsm, uint32_t *buf, uint32_t size)
}
}
/*
* Clear the data FIFO
*
* Typically, this is only required during driver initialisation, where no
* assumptions can be made regarding the state of the FIFO.
*
* The process of clearing the FIFO is complicated by fact that while it is
* possible for the FIFO to contain an arbitrary number of bytes [1], the
* SPI_FAST_SEQ_STA register only reports the number of complete 32-bit words
* present. Furthermore, data can only be drained from the FIFO by reading
* complete 32-bit words.
*
* With this in mind, a two stage process is used to the clear the FIFO:
*
* 1. Read any complete 32-bit words from the FIFO, as reported by the
* SPI_FAST_SEQ_STA register.
*
* 2. Mop up any remaining bytes. At this point, it is not known if there
* are 0, 1, 2, or 3 bytes in the FIFO. To handle all cases, a dummy FSM
* sequence is used to load one byte at a time, until a complete 32-bit
* word is formed; at most, 4 bytes will need to be loaded.
*
* [1] It is theoretically possible for the FIFO to contain an arbitrary number
* of bits. However, since there are no known use-cases that leave
* incomplete bytes in the FIFO, only words and bytes are considered here.
*/
static void stfsm_clear_fifo(struct stfsm *fsm)
{
const struct stfsm_seq *seq = &stfsm_seq_load_fifo_byte;
uint32_t words, i;
/* 1. Clear any 32-bit words */
words = stfsm_fifo_available(fsm);
if (words) {
for (i = 0; i < words; i++)
readl(fsm->base + SPI_FAST_SEQ_DATA_REG);
dev_dbg(fsm->dev, "cleared %d words from FIFO\n", words);
}
/*
* 2. Clear any remaining bytes
* - Load the FIFO, one byte at a time, until a complete 32-bit word
* is available.
*/
for (i = 0, words = 0; i < 4 && !words; i++) {
stfsm_load_seq(fsm, seq);
stfsm_wait_seq(fsm);
words = stfsm_fifo_available(fsm);
}
/* - A single word must be available now */
if (words != 1) {
dev_err(fsm->dev, "failed to clear bytes from the data FIFO\n");
return;
}
/* - Read the 32-bit word */
readl(fsm->base + SPI_FAST_SEQ_DATA_REG);
dev_dbg(fsm->dev, "cleared %d byte(s) from the data FIFO\n", 4 - i);
}
static int stfsm_write_fifo(struct stfsm *fsm, const uint32_t *buf,
uint32_t size)
{
@ -1521,11 +1586,11 @@ static int stfsm_write(struct stfsm *fsm, const uint8_t *buf,
uint32_t size_lb;
uint32_t size_mop;
uint32_t tmp[4];
uint32_t i;
uint32_t page_buf[FLASH_PAGESIZE_32];
uint8_t *t = (uint8_t *)&tmp;
const uint8_t *p;
int ret;
int i;
dev_dbg(fsm->dev, "writing %d bytes to 0x%08x\n", size, offset);
@ -1843,8 +1908,7 @@ static void stfsm_set_freq(struct stfsm *fsm, uint32_t spi_freq)
uint32_t emi_freq;
uint32_t clk_div;
/* TODO: Make this dynamic */
emi_freq = STFSM_DEFAULT_EMI_FREQ;
emi_freq = clk_get_rate(fsm->clk);
/*
* Calculate clk_div - values between 2 and 128
@ -1994,6 +2058,18 @@ static int stfsm_probe(struct platform_device *pdev)
return PTR_ERR(fsm->base);
}
fsm->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(fsm->clk)) {
dev_err(fsm->dev, "Couldn't find EMI clock.\n");
return PTR_ERR(fsm->clk);
}
ret = clk_prepare_enable(fsm->clk);
if (ret) {
dev_err(fsm->dev, "Failed to enable EMI clock.\n");
return ret;
}
mutex_init(&fsm->lock);
ret = stfsm_init(fsm);
@ -2058,6 +2134,28 @@ static int stfsm_remove(struct platform_device *pdev)
return mtd_device_unregister(&fsm->mtd);
}
#ifdef CONFIG_PM_SLEEP
static int stfsmfsm_suspend(struct device *dev)
{
struct stfsm *fsm = dev_get_drvdata(dev);
clk_disable_unprepare(fsm->clk);
return 0;
}
static int stfsmfsm_resume(struct device *dev)
{
struct stfsm *fsm = dev_get_drvdata(dev);
clk_prepare_enable(fsm->clk);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(stfsm_pm_ops, stfsmfsm_suspend, stfsmfsm_resume);
static const struct of_device_id stfsm_match[] = {
{ .compatible = "st,spi-fsm", },
{},
@ -2070,6 +2168,7 @@ static struct platform_driver stfsm_driver = {
.driver = {
.name = "st-spi-fsm",
.of_match_table = stfsm_match,
.pm = &stfsm_pm_ops,
},
};
module_platform_driver(stfsm_driver);

10
drivers/mtd/maps/physmap_of.c
Просмотреть файл

@ -269,6 +269,16 @@ static int of_flash_probe(struct platform_device *dev)
info->list[i].mtd = obsolete_probe(dev,
&info->list[i].map);
}
/* Fall back to mapping region as ROM */
if (!info->list[i].mtd) {
dev_warn(&dev->dev,
"do_map_probe() failed for type %s\n",
probe_type);
info->list[i].mtd = do_map_probe("map_rom",
&info->list[i].map);
}
mtd_list[i] = info->list[i].mtd;
err = -ENXIO;

10
drivers/mtd/mtdblock.c
Просмотреть файл

@ -45,8 +45,6 @@ struct mtdblk_dev {
enum { STATE_EMPTY, STATE_CLEAN, STATE_DIRTY } cache_state;
};
static DEFINE_MUTEX(mtdblks_lock);
/*
* Cache stuff...
*
@ -286,10 +284,8 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd)
pr_debug("mtdblock_open\n");
mutex_lock(&mtdblks_lock);
if (mtdblk->count) {
mtdblk->count++;
mutex_unlock(&mtdblks_lock);
return 0;
}
@ -302,8 +298,6 @@ static int mtdblock_open(struct mtd_blktrans_dev *mbd)
mtdblk->cache_data = NULL;
}
mutex_unlock(&mtdblks_lock);
pr_debug("ok\n");
return 0;
@ -315,8 +309,6 @@ static void mtdblock_release(struct mtd_blktrans_dev *mbd)
pr_debug("mtdblock_release\n");
mutex_lock(&mtdblks_lock);
mutex_lock(&mtdblk->cache_mutex);
write_cached_data(mtdblk);
mutex_unlock(&mtdblk->cache_mutex);
@ -331,8 +323,6 @@ static void mtdblock_release(struct mtd_blktrans_dev *mbd)
vfree(mtdblk->cache_data);
}
mutex_unlock(&mtdblks_lock);
pr_debug("ok\n");
}

3
drivers/mtd/mtdconcat.c
Просмотреть файл

@ -311,7 +311,8 @@ concat_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops)
devops.len = subdev->size - to;
err = mtd_write_oob(subdev, to, &devops);
ops->retlen += devops.oobretlen;
ops->retlen += devops.retlen;
ops->oobretlen += devops.oobretlen;
if (err)
return err;

28
drivers/mtd/mtdcore.c
Просмотреть файл

@ -37,6 +37,7 @@
#include <linux/backing-dev.h>
#include <linux/gfp.h>
#include <linux/slab.h>
#include <linux/reboot.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@ -356,6 +357,17 @@ unsigned mtd_mmap_capabilities(struct mtd_info *mtd)
EXPORT_SYMBOL_GPL(mtd_mmap_capabilities);
#endif
static int mtd_reboot_notifier(struct notifier_block *n, unsigned long state,
void *cmd)
{
struct mtd_info *mtd;
mtd = container_of(n, struct mtd_info, reboot_notifier);
mtd->_reboot(mtd);
return NOTIFY_DONE;
}
/**
* add_mtd_device - register an MTD device
* @mtd: pointer to new MTD device info structure
@ -544,6 +556,19 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
err = -ENODEV;
}
/*
* FIXME: some drivers unfortunately call this function more than once.
* So we have to check if we've already assigned the reboot notifier.
*
* Generally, we can make multiple calls work for most cases, but it
* does cause problems with parse_mtd_partitions() above (e.g.,
* cmdlineparts will register partitions more than once).
*/
if (mtd->_reboot && !mtd->reboot_notifier.notifier_call) {
mtd->reboot_notifier.notifier_call = mtd_reboot_notifier;
register_reboot_notifier(&mtd->reboot_notifier);
}
return err;
}
EXPORT_SYMBOL_GPL(mtd_device_parse_register);
@ -558,6 +583,9 @@ int mtd_device_unregister(struct mtd_info *master)
{
int err;
if (master->_reboot)
unregister_reboot_notifier(&master->reboot_notifier);
err = del_mtd_partitions(master);
if (err)
return err;

7
drivers/mtd/nand/Kconfig
Просмотреть файл

@ -421,7 +421,7 @@ config MTD_NAND_ORION
config MTD_NAND_FSL_ELBC
tristate "NAND support for Freescale eLBC controllers"
depends on PPC_OF
depends on PPC
select FSL_LBC
help
Various Freescale chips, including the 8313, include a NAND Flash
@ -524,4 +524,9 @@ config MTD_NAND_SUNXI
help
Enables support for NAND Flash chips on Allwinner SoCs.
config MTD_NAND_HISI504
tristate "Support for NAND controller on Hisilicon SoC Hip04"
help
Enables support for NAND controller on Hisilicon SoC Hip04.
endif # MTD_NAND

1
drivers/mtd/nand/Makefile
Просмотреть файл

@ -51,5 +51,6 @@ obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o
obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
nand-objs := nand_base.o nand_bbt.o nand_timings.o

6
drivers/mtd/nand/ams-delta.c
Просмотреть файл

@ -183,7 +183,7 @@ static int ams_delta_init(struct platform_device *pdev)
return -ENXIO;
/* Allocate memory for MTD device structure and private data */
ams_delta_mtd = kmalloc(sizeof(struct mtd_info) +
ams_delta_mtd = kzalloc(sizeof(struct mtd_info) +
sizeof(struct nand_chip), GFP_KERNEL);
if (!ams_delta_mtd) {
printk (KERN_WARNING "Unable to allocate E3 NAND MTD device structure.\n");
@ -196,10 +196,6 @@ static int ams_delta_init(struct platform_device *pdev)
/* Get pointer to private data */
this = (struct nand_chip *) (&ams_delta_mtd[1]);
/* Initialize structures */
memset(ams_delta_mtd, 0, sizeof(struct mtd_info));
memset(this, 0, sizeof(struct nand_chip));
/* Link the private data with the MTD structure */
ams_delta_mtd->priv = this;

31
drivers/mtd/nand/atmel_nand.c
Просмотреть файл

@ -63,6 +63,10 @@ module_param(on_flash_bbt, int, 0);
#include "atmel_nand_ecc.h" /* Hardware ECC registers */
#include "atmel_nand_nfc.h" /* Nand Flash Controller definition */
struct atmel_nand_caps {
bool pmecc_correct_erase_page;
};
/* oob layout for large page size
* bad block info is on bytes 0 and 1
* the bytes have to be consecutives to avoid
@ -124,6 +128,7 @@ struct atmel_nand_host {
struct atmel_nfc *nfc;
struct atmel_nand_caps *caps;
bool has_pmecc;
u8 pmecc_corr_cap;
u16 pmecc_sector_size;
@ -847,7 +852,11 @@ static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf,
struct atmel_nand_host *host = nand_chip->priv;
int i, err_nbr;
uint8_t *buf_pos;
int total_err = 0;
int max_bitflips = 0;
/* If can correct bitfilps from erased page, do the normal check */
if (host->caps->pmecc_correct_erase_page)
goto normal_check;
for (i = 0; i < nand_chip->ecc.total; i++)
if (ecc[i] != 0xff)
@ -874,13 +883,13 @@ normal_check:
pmecc_correct_data(mtd, buf_pos, ecc, i,
nand_chip->ecc.bytes, err_nbr);
mtd->ecc_stats.corrected += err_nbr;
total_err += err_nbr;
max_bitflips = max_t(int, max_bitflips, err_nbr);
}
}
pmecc_stat >>= 1;
}
return total_err;
return max_bitflips;
}
static void pmecc_enable(struct atmel_nand_host *host, int ecc_op)
@ -1474,6 +1483,8 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
}
static const struct of_device_id atmel_nand_dt_ids[];
static int atmel_of_init_port(struct atmel_nand_host *host,
struct device_node *np)
{
@ -1483,6 +1494,9 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
struct atmel_nand_data *board = &host->board;
enum of_gpio_flags flags = 0;
host->caps = (struct atmel_nand_caps *)
of_match_device(atmel_nand_dt_ids, host->dev)->data;
if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) {
if (val >= 32) {
dev_err(host->dev, "invalid addr-offset %u\n", val);
@ -2288,8 +2302,17 @@ static int atmel_nand_remove(struct platform_device *pdev)
return 0;
}
static struct atmel_nand_caps at91rm9200_caps = {
.pmecc_correct_erase_page = false,
};
static struct atmel_nand_caps sama5d4_caps = {
.pmecc_correct_erase_page = true,
};
static const struct of_device_id atmel_nand_dt_ids[] = {
{ .compatible = "atmel,at91rm9200-nand" },
{ .compatible = "atmel,at91rm9200-nand", .data = &at91rm9200_caps },
{ .compatible = "atmel,sama5d4-nand", .data = &sama5d4_caps },
{ /* sentinel */ }
};

40
drivers/mtd/nand/denali.c
Просмотреть файл

@ -1041,7 +1041,7 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op)
index_addr(denali, mode | ((addr >> 16) << 8), 0x2200);
/* 3. set memory low address bits 23:8 */
index_addr(denali, mode | ((addr & 0xff) << 8), 0x2300);
index_addr(denali, mode | ((addr & 0xffff) << 8), 0x2300);
/* 4. interrupt when complete, burst len = 64 bytes */
index_addr(denali, mode | 0x14000, 0x2400);
@ -1328,35 +1328,6 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
break;
}
}
/* stubs for ECC functions not used by the NAND core */
static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
uint8_t *ecc_code)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
dev_err(denali->dev, "denali_ecc_calculate called unexpectedly\n");
BUG();
return -EIO;
}
static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
dev_err(denali->dev, "denali_ecc_correct called unexpectedly\n");
BUG();
return -EIO;
}
static void denali_ecc_hwctl(struct mtd_info *mtd, int mode)
{
struct denali_nand_info *denali = mtd_to_denali(mtd);
dev_err(denali->dev, "denali_ecc_hwctl called unexpectedly\n");
BUG();
}
/* end NAND core entry points */
/* Initialization code to bring the device up to a known good state */
@ -1609,15 +1580,6 @@ int denali_init(struct denali_nand_info *denali)
denali->totalblks = denali->mtd.size >> denali->nand.phys_erase_shift;
denali->blksperchip = denali->totalblks / denali->nand.numchips;
/*
* These functions are required by the NAND core framework, otherwise,
* the NAND core will assert. However, we don't need them, so we'll stub
* them out.
*/
denali->nand.ecc.calculate = denali_ecc_calculate;
denali->nand.ecc.correct = denali_ecc_correct;
denali->nand.ecc.hwctl = denali_ecc_hwctl;
/* override the default read operations */
denali->nand.ecc.size = ECC_SECTOR_SIZE * denali->devnum;
denali->nand.ecc.read_page = denali_read_page;

9
drivers/mtd/nand/gpmi-nand/gpmi-nand.c
Просмотреть файл

@ -1294,14 +1294,6 @@ exit_auxiliary:
* ecc.read_page or ecc.read_page_raw function. Thus, the fact that MTD wants an
* ECC-based or raw view of the page is implicit in which function it calls
* (there is a similar pair of ECC-based/raw functions for writing).
*
* FIXME: The following paragraph is incorrect, now that there exist
* ecc.read_oob_raw and ecc.write_oob_raw functions.
*
* Since MTD assumes the OOB is not covered by ECC, there is no pair of
* ECC-based/raw functions for reading or or writing the OOB. The fact that the
* caller wants an ECC-based or raw view of the page is not propagated down to
* this driver.
*/
static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
int page)
@ -2029,7 +2021,6 @@ static int gpmi_nand_probe(struct platform_device *pdev)
exit_nfc_init:
release_resources(this);
exit_acquire_resources:
dev_err(this->dev, "driver registration failed: %d\n", ret);
return ret;
}

891
drivers/mtd/nand/hisi504_nand.c Normal file
Просмотреть файл

@ -0,0 +1,891 @@
/*
* Hisilicon NAND Flash controller driver
*
* Copyright © 2012-2014 HiSilicon Technologies Co., Ltd.
* http://www.hisilicon.com
*
* Author: Zhou Wang <wangzhou.bry@gmail.com>
* The initial developer of the original code is Zhiyong Cai
* <caizhiyong@huawei.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/of.h>
#include <linux/of_mtd.h>
#include <linux/mtd/mtd.h>
#include <linux/sizes.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/mtd/nand.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#define HINFC504_MAX_CHIP (4)
#define HINFC504_W_LATCH (5)
#define HINFC504_R_LATCH (7)
#define HINFC504_RW_LATCH (3)
#define HINFC504_NFC_TIMEOUT (2 * HZ)
#define HINFC504_NFC_PM_TIMEOUT (1 * HZ)
#define HINFC504_NFC_DMA_TIMEOUT (5 * HZ)
#define HINFC504_CHIP_DELAY (25)
#define HINFC504_REG_BASE_ADDRESS_LEN (0x100)
#define HINFC504_BUFFER_BASE_ADDRESS_LEN (2048 + 128)
#define HINFC504_ADDR_CYCLE_MASK 0x4
#define HINFC504_CON 0x00
#define HINFC504_CON_OP_MODE_NORMAL BIT(0)
#define HINFC504_CON_PAGEISZE_SHIFT (1)
#define HINFC504_CON_PAGESIZE_MASK (0x07)
#define HINFC504_CON_BUS_WIDTH BIT(4)
#define HINFC504_CON_READY_BUSY_SEL BIT(8)
#define HINFC504_CON_ECCTYPE_SHIFT (9)
#define HINFC504_CON_ECCTYPE_MASK (0x07)
#define HINFC504_PWIDTH 0x04
#define SET_HINFC504_PWIDTH(_w_lcnt, _r_lcnt, _rw_hcnt) \
((_w_lcnt) | (((_r_lcnt) & 0x0F) << 4) | (((_rw_hcnt) & 0x0F) << 8))
#define HINFC504_CMD 0x0C
#define HINFC504_ADDRL 0x10
#define HINFC504_ADDRH 0x14
#define HINFC504_DATA_NUM 0x18
#define HINFC504_OP 0x1C
#define HINFC504_OP_READ_DATA_EN BIT(1)
#define HINFC504_OP_WAIT_READY_EN BIT(2)
#define HINFC504_OP_CMD2_EN BIT(3)
#define HINFC504_OP_WRITE_DATA_EN BIT(4)
#define HINFC504_OP_ADDR_EN BIT(5)
#define HINFC504_OP_CMD1_EN BIT(6)
#define HINFC504_OP_NF_CS_SHIFT (7)
#define HINFC504_OP_NF_CS_MASK (3)
#define HINFC504_OP_ADDR_CYCLE_SHIFT (9)
#define HINFC504_OP_ADDR_CYCLE_MASK (7)
#define HINFC504_STATUS 0x20
#define HINFC504_READY BIT(0)
#define HINFC504_INTEN 0x24
#define HINFC504_INTEN_DMA BIT(9)
#define HINFC504_INTEN_UE BIT(6)
#define HINFC504_INTEN_CE BIT(5)
#define HINFC504_INTS 0x28
#define HINFC504_INTS_DMA BIT(9)
#define HINFC504_INTS_UE BIT(6)
#define HINFC504_INTS_CE BIT(5)
#define HINFC504_INTCLR 0x2C
#define HINFC504_INTCLR_DMA BIT(9)
#define HINFC504_INTCLR_UE BIT(6)
#define HINFC504_INTCLR_CE BIT(5)
#define HINFC504_ECC_STATUS 0x5C
#define HINFC504_ECC_16_BIT_SHIFT 12
#define HINFC504_DMA_CTRL 0x60
#define HINFC504_DMA_CTRL_DMA_START BIT(0)
#define HINFC504_DMA_CTRL_WE BIT(1)
#define HINFC504_DMA_CTRL_DATA_AREA_EN BIT(2)
#define HINFC504_DMA_CTRL_OOB_AREA_EN BIT(3)
#define HINFC504_DMA_CTRL_BURST4_EN BIT(4)
#define HINFC504_DMA_CTRL_BURST8_EN BIT(5)
#define HINFC504_DMA_CTRL_BURST16_EN BIT(6)
#define HINFC504_DMA_CTRL_ADDR_NUM_SHIFT (7)
#define HINFC504_DMA_CTRL_ADDR_NUM_MASK (1)
#define HINFC504_DMA_CTRL_CS_SHIFT (8)
#define HINFC504_DMA_CTRL_CS_MASK (0x03)
#define HINFC504_DMA_ADDR_DATA 0x64
#define HINFC504_DMA_ADDR_OOB 0x68
#define HINFC504_DMA_LEN 0x6C
#define HINFC504_DMA_LEN_OOB_SHIFT (16)
#define HINFC504_DMA_LEN_OOB_MASK (0xFFF)
#define HINFC504_DMA_PARA 0x70
#define HINFC504_DMA_PARA_DATA_RW_EN BIT(0)
#define HINFC504_DMA_PARA_OOB_RW_EN BIT(1)
#define HINFC504_DMA_PARA_DATA_EDC_EN BIT(2)
#define HINFC504_DMA_PARA_OOB_EDC_EN BIT(3)
#define HINFC504_DMA_PARA_DATA_ECC_EN BIT(4)
#define HINFC504_DMA_PARA_OOB_ECC_EN BIT(5)
#define HINFC_VERSION 0x74
#define HINFC504_LOG_READ_ADDR 0x7C
#define HINFC504_LOG_READ_LEN 0x80
#define HINFC504_NANDINFO_LEN 0x10
struct hinfc_host {
struct nand_chip chip;
struct mtd_info mtd;
struct device *dev;
void __iomem *iobase;
void __iomem *mmio;
struct completion cmd_complete;
unsigned int offset;
unsigned int command;
int chipselect;
unsigned int addr_cycle;
u32 addr_value[2];
u32 cache_addr_value[2];
char *buffer;
dma_addr_t dma_buffer;
dma_addr_t dma_oob;
int version;
unsigned int irq_status; /* interrupt status */
};
static inline unsigned int hinfc_read(struct hinfc_host *host, unsigned int reg)
{
return readl(host->iobase + reg);
}
static inline void hinfc_write(struct hinfc_host *host, unsigned int value,
unsigned int reg)
{
writel(value, host->iobase + reg);
}
static void wait_controller_finished(struct hinfc_host *host)
{
unsigned long timeout = jiffies + HINFC504_NFC_TIMEOUT;
int val;
while (time_before(jiffies, timeout)) {
val = hinfc_read(host, HINFC504_STATUS);
if (host->command == NAND_CMD_ERASE2) {
/* nfc is ready */
while (!(val & HINFC504_READY)) {
usleep_range(500, 1000);
val = hinfc_read(host, HINFC504_STATUS);
}
return;
}
if (val & HINFC504_READY)
return;
}
/* wait cmd timeout */
dev_err(host->dev, "Wait NAND controller exec cmd timeout.\n");
}
static void hisi_nfc_dma_transfer(struct hinfc_host *host, int todev)
{
struct mtd_info *mtd = &host->mtd;
struct nand_chip *chip = mtd->priv;
unsigned long val;
int ret;
hinfc_write(host, host->dma_buffer, HINFC504_DMA_ADDR_DATA);
hinfc_write(host, host->dma_oob, HINFC504_DMA_ADDR_OOB);
if (chip->ecc.mode == NAND_ECC_NONE) {
hinfc_write(host, ((mtd->oobsize & HINFC504_DMA_LEN_OOB_MASK)
<< HINFC504_DMA_LEN_OOB_SHIFT), HINFC504_DMA_LEN);
hinfc_write(host, HINFC504_DMA_PARA_DATA_RW_EN
| HINFC504_DMA_PARA_OOB_RW_EN, HINFC504_DMA_PARA);
} else {
if (host->command == NAND_CMD_READOOB)
hinfc_write(host, HINFC504_DMA_PARA_OOB_RW_EN
| HINFC504_DMA_PARA_OOB_EDC_EN
| HINFC504_DMA_PARA_OOB_ECC_EN, HINFC504_DMA_PARA);
else
hinfc_write(host, HINFC504_DMA_PARA_DATA_RW_EN
| HINFC504_DMA_PARA_OOB_RW_EN
| HINFC504_DMA_PARA_DATA_EDC_EN
| HINFC504_DMA_PARA_OOB_EDC_EN
| HINFC504_DMA_PARA_DATA_ECC_EN
| HINFC504_DMA_PARA_OOB_ECC_EN, HINFC504_DMA_PARA);
}
val = (HINFC504_DMA_CTRL_DMA_START | HINFC504_DMA_CTRL_BURST4_EN
| HINFC504_DMA_CTRL_BURST8_EN | HINFC504_DMA_CTRL_BURST16_EN
| HINFC504_DMA_CTRL_DATA_AREA_EN | HINFC504_DMA_CTRL_OOB_AREA_EN
| ((host->addr_cycle == 4 ? 1 : 0)
<< HINFC504_DMA_CTRL_ADDR_NUM_SHIFT)
| ((host->chipselect & HINFC504_DMA_CTRL_CS_MASK)
<< HINFC504_DMA_CTRL_CS_SHIFT));
if (todev)
val |= HINFC504_DMA_CTRL_WE;
init_completion(&host->cmd_complete);
hinfc_write(host, val, HINFC504_DMA_CTRL);
ret = wait_for_completion_timeout(&host->cmd_complete,
HINFC504_NFC_DMA_TIMEOUT);
if (!ret) {
dev_err(host->dev, "DMA operation(irq) timeout!\n");
/* sanity check */
val = hinfc_read(host, HINFC504_DMA_CTRL);
if (!(val & HINFC504_DMA_CTRL_DMA_START))
dev_err(host->dev, "DMA is already done but without irq ACK!\n");
else
dev_err(host->dev, "DMA is really timeout!\n");
}
}
static int hisi_nfc_send_cmd_pageprog(struct hinfc_host *host)
{
host->addr_value[0] &= 0xffff0000;
hinfc_write(host, host->addr_value[0], HINFC504_ADDRL);
hinfc_write(host, host->addr_value[1], HINFC504_ADDRH);
hinfc_write(host, NAND_CMD_PAGEPROG << 8 | NAND_CMD_SEQIN,
HINFC504_CMD);
hisi_nfc_dma_transfer(host, 1);
return 0;
}
static int hisi_nfc_send_cmd_readstart(struct hinfc_host *host)
{
struct mtd_info *mtd = &host->mtd;
if ((host->addr_value[0] == host->cache_addr_value[0]) &&
(host->addr_value[1] == host->cache_addr_value[1]))
return 0;
host->addr_value[0] &= 0xffff0000;
hinfc_write(host, host->addr_value[0], HINFC504_ADDRL);
hinfc_write(host, host->addr_value[1], HINFC504_ADDRH);
hinfc_write(host, NAND_CMD_READSTART << 8 | NAND_CMD_READ0,
HINFC504_CMD);
hinfc_write(host, 0, HINFC504_LOG_READ_ADDR);
hinfc_write(host, mtd->writesize + mtd->oobsize,
HINFC504_LOG_READ_LEN);
hisi_nfc_dma_transfer(host, 0);
host->cache_addr_value[0] = host->addr_value[0];
host->cache_addr_value[1] = host->addr_value[1];
return 0;
}
static int hisi_nfc_send_cmd_erase(struct hinfc_host *host)
{
hinfc_write(host, host->addr_value[0], HINFC504_ADDRL);
hinfc_write(host, (NAND_CMD_ERASE2 << 8) | NAND_CMD_ERASE1,
HINFC504_CMD);
hinfc_write(host, HINFC504_OP_WAIT_READY_EN
| HINFC504_OP_CMD2_EN
| HINFC504_OP_CMD1_EN
| HINFC504_OP_ADDR_EN
| ((host->chipselect & HINFC504_OP_NF_CS_MASK)
<< HINFC504_OP_NF_CS_SHIFT)
| ((host->addr_cycle & HINFC504_OP_ADDR_CYCLE_MASK)
<< HINFC504_OP_ADDR_CYCLE_SHIFT),
HINFC504_OP);
wait_controller_finished(host);
return 0;
}
static int hisi_nfc_send_cmd_readid(struct hinfc_host *host)
{
hinfc_write(host, HINFC504_NANDINFO_LEN, HINFC504_DATA_NUM);
hinfc_write(host, NAND_CMD_READID, HINFC504_CMD);
hinfc_write(host, 0, HINFC504_ADDRL);
hinfc_write(host, HINFC504_OP_CMD1_EN | HINFC504_OP_ADDR_EN
| HINFC504_OP_READ_DATA_EN
| ((host->chipselect & HINFC504_OP_NF_CS_MASK)
<< HINFC504_OP_NF_CS_SHIFT)
| 1 << HINFC504_OP_ADDR_CYCLE_SHIFT, HINFC504_OP);
wait_controller_finished(host);
return 0;
}
static int hisi_nfc_send_cmd_status(struct hinfc_host *host)
{
hinfc_write(host, HINFC504_NANDINFO_LEN, HINFC504_DATA_NUM);
hinfc_write(host, NAND_CMD_STATUS, HINFC504_CMD);
hinfc_write(host, HINFC504_OP_CMD1_EN
| HINFC504_OP_READ_DATA_EN
| ((host->chipselect & HINFC504_OP_NF_CS_MASK)
<< HINFC504_OP_NF_CS_SHIFT),
HINFC504_OP);
wait_controller_finished(host);
return 0;
}
static int hisi_nfc_send_cmd_reset(struct hinfc_host *host, int chipselect)
{
hinfc_write(host, NAND_CMD_RESET, HINFC504_CMD);
hinfc_write(host, HINFC504_OP_CMD1_EN
| ((chipselect & HINFC504_OP_NF_CS_MASK)
<< HINFC504_OP_NF_CS_SHIFT)
| HINFC504_OP_WAIT_READY_EN,
HINFC504_OP);
wait_controller_finished(host);
return 0;
}
static void hisi_nfc_select_chip(struct mtd_info *mtd, int chipselect)
{
struct nand_chip *chip = mtd->priv;
struct hinfc_host *host = chip->priv;
if (chipselect < 0)
return;
host->chipselect = chipselect;
}
static uint8_t hisi_nfc_read_byte(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
struct hinfc_host *host = chip->priv;
if (host->command == NAND_CMD_STATUS)
return *(uint8_t *)(host->mmio);
host->offset++;
if (host->command == NAND_CMD_READID)
return *(uint8_t *)(host->mmio + host->offset - 1);
return *(uint8_t *)(host->buffer + host->offset - 1);
}
static u16 hisi_nfc_read_word(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
struct hinfc_host *host = chip->priv;
host->offset += 2;
return *(u16 *)(host->buffer + host->offset - 2);
}
static void
hisi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
struct nand_chip *chip = mtd->priv;
struct hinfc_host *host = chip->priv;
memcpy(host->buffer + host->offset, buf, len);
host->offset += len;
}
static void hisi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
struct nand_chip *chip = mtd->priv;
struct hinfc_host *host = chip->priv;
memcpy(buf, host->buffer + host->offset, len);
host->offset += len;
}
static void set_addr(struct mtd_info *mtd, int column, int page_addr)
{
struct nand_chip *chip = mtd->priv;
struct hinfc_host *host = chip->priv;
unsigned int command = host->command;
host->addr_cycle = 0;
host->addr_value[0] = 0;
host->addr_value[1] = 0;
/* Serially input address */
if (column != -1) {
/* Adjust columns for 16 bit buswidth */
if (chip->options & NAND_BUSWIDTH_16 &&
!nand_opcode_8bits(command))
column >>= 1;
host->addr_value[0] = column & 0xffff;
host->addr_cycle = 2;
}
if (page_addr != -1) {
host->addr_value[0] |= (page_addr & 0xffff)
<< (host->addr_cycle * 8);
host->addr_cycle += 2;
/* One more address cycle for devices > 128MiB */
if (chip->chipsize > (128 << 20)) {
host->addr_cycle += 1;
if (host->command == NAND_CMD_ERASE1)
host->addr_value[0] |= ((page_addr >> 16) & 0xff) << 16;
else
host->addr_value[1] |= ((page_addr >> 16) & 0xff);
}
}
}
static void hisi_nfc_cmdfunc(struct mtd_info *mtd, unsigned command, int column,
int page_addr)
{
struct nand_chip *chip = mtd->priv;
struct hinfc_host *host = chip->priv;
int is_cache_invalid = 1;
unsigned int flag = 0;
host->command = command;
switch (command) {
case NAND_CMD_READ0:
case NAND_CMD_READOOB:
if (command == NAND_CMD_READ0)
host->offset = column;
else
host->offset = column + mtd->writesize;
is_cache_invalid = 0;
set_addr(mtd, column, page_addr);
hisi_nfc_send_cmd_readstart(host);
break;
case NAND_CMD_SEQIN:
host->offset = column;
set_addr(mtd, column, page_addr);
break;
case NAND_CMD_ERASE1:
set_addr(mtd, column, page_addr);
break;
case NAND_CMD_PAGEPROG:
hisi_nfc_send_cmd_pageprog(host);
break;
case NAND_CMD_ERASE2:
hisi_nfc_send_cmd_erase(host);
break;
case NAND_CMD_READID:
host->offset = column;
memset(host->mmio, 0, 0x10);
hisi_nfc_send_cmd_readid(host);
break;
case NAND_CMD_STATUS:
flag = hinfc_read(host, HINFC504_CON);
if (chip->ecc.mode == NAND_ECC_HW)
hinfc_write(host,
flag & ~(HINFC504_CON_ECCTYPE_MASK <<
HINFC504_CON_ECCTYPE_SHIFT), HINFC504_CON);
host->offset = 0;
memset(host->mmio, 0, 0x10);
hisi_nfc_send_cmd_status(host);
hinfc_write(host, flag, HINFC504_CON);
break;
case NAND_CMD_RESET:
hisi_nfc_send_cmd_reset(host, host->chipselect);
break;
default:
dev_err(host->dev, "Error: unsupported cmd(cmd=%x, col=%x, page=%x)\n",
command, column, page_addr);
}
if (is_cache_invalid) {
host->cache_addr_value[0] = ~0;
host->cache_addr_value[1] = ~0;
}
}
static irqreturn_t hinfc_irq_handle(int irq, void *devid)
{
struct hinfc_host *host = devid;
unsigned int flag;
flag = hinfc_read(host, HINFC504_INTS);
/* store interrupts state */
host->irq_status |= flag;
if (flag & HINFC504_INTS_DMA) {
hinfc_write(host, HINFC504_INTCLR_DMA, HINFC504_INTCLR);
complete(&host->cmd_complete);
} else if (flag & HINFC504_INTS_CE) {
hinfc_write(host, HINFC504_INTCLR_CE, HINFC504_INTCLR);
} else if (flag & HINFC504_INTS_UE) {
hinfc_write(host, HINFC504_INTCLR_UE, HINFC504_INTCLR);
}
return IRQ_HANDLED;
}
static int hisi_nand_read_page_hwecc(struct mtd_info *mtd,
struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
{
struct hinfc_host *host = chip->priv;
int max_bitflips = 0, stat = 0, stat_max = 0, status_ecc;
int stat_1, stat_2;
chip->read_buf(mtd, buf, mtd->writesize);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
/* errors which can not be corrected by ECC */
if (host->irq_status & HINFC504_INTS_UE) {
mtd->ecc_stats.failed++;
} else if (host->irq_status & HINFC504_INTS_CE) {
/* TODO: need add other ECC modes! */
switch (chip->ecc.strength) {
case 16:
status_ecc = hinfc_read(host, HINFC504_ECC_STATUS) >>
HINFC504_ECC_16_BIT_SHIFT & 0x0fff;
stat_2 = status_ecc & 0x3f;
stat_1 = status_ecc >> 6 & 0x3f;
stat = stat_1 + stat_2;
stat_max = max_t(int, stat_1, stat_2);
}
mtd->ecc_stats.corrected += stat;
max_bitflips = max_t(int, max_bitflips, stat_max);
}
host->irq_status = 0;
return max_bitflips;
}
static int hisi_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
int page)
{
struct hinfc_host *host = chip->priv;
chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
if (host->irq_status & HINFC504_INTS_UE) {
host->irq_status = 0;
return -EBADMSG;
}
host->irq_status = 0;
return 0;
}
static int hisi_nand_write_page_hwecc(struct mtd_info *mtd,
struct nand_chip *chip, const uint8_t *buf, int oob_required)
{
chip->write_buf(mtd, buf, mtd->writesize);
if (oob_required)
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
return 0;
}
static void hisi_nfc_host_init(struct hinfc_host *host)
{
struct nand_chip *chip = &host->chip;
unsigned int flag = 0;
host->version = hinfc_read(host, HINFC_VERSION);
host->addr_cycle = 0;
host->addr_value[0] = 0;
host->addr_value[1] = 0;
host->cache_addr_value[0] = ~0;
host->cache_addr_value[1] = ~0;
host->chipselect = 0;
/* default page size: 2K, ecc_none. need modify */
flag = HINFC504_CON_OP_MODE_NORMAL | HINFC504_CON_READY_BUSY_SEL
| ((0x001 & HINFC504_CON_PAGESIZE_MASK)
<< HINFC504_CON_PAGEISZE_SHIFT)
| ((0x0 & HINFC504_CON_ECCTYPE_MASK)
<< HINFC504_CON_ECCTYPE_SHIFT)
| ((chip->options & NAND_BUSWIDTH_16) ?
HINFC504_CON_BUS_WIDTH : 0);
hinfc_write(host, flag, HINFC504_CON);
memset(host->mmio, 0xff, HINFC504_BUFFER_BASE_ADDRESS_LEN);
hinfc_write(host, SET_HINFC504_PWIDTH(HINFC504_W_LATCH,
HINFC504_R_LATCH, HINFC504_RW_LATCH), HINFC504_PWIDTH);
/* enable DMA irq */
hinfc_write(host, HINFC504_INTEN_DMA, HINFC504_INTEN);
}
static struct nand_ecclayout nand_ecc_2K_16bits = {
.oobavail = 6,
.oobfree = { {2, 6} },
};
static int hisi_nfc_ecc_probe(struct hinfc_host *host)
{
unsigned int flag;
int size, strength, ecc_bits;
struct device *dev = host->dev;
struct nand_chip *chip = &host->chip;
struct mtd_info *mtd = &host->mtd;
struct device_node *np = host->dev->of_node;
size = of_get_nand_ecc_step_size(np);
strength = of_get_nand_ecc_strength(np);
if (size != 1024) {
dev_err(dev, "error ecc size: %d\n", size);
return -EINVAL;
}
if ((size == 1024) && ((strength != 8) && (strength != 16) &&
(strength != 24) && (strength != 40))) {
dev_err(dev, "ecc size and strength do not match\n");
return -EINVAL;
}
chip->ecc.size = size;
chip->ecc.strength = strength;
chip->ecc.read_page = hisi_nand_read_page_hwecc;
chip->ecc.read_oob = hisi_nand_read_oob;
chip->ecc.write_page = hisi_nand_write_page_hwecc;
switch (chip->ecc.strength) {
case 16:
ecc_bits = 6;
if (mtd->writesize == 2048)
chip->ecc.layout = &nand_ecc_2K_16bits;
/* TODO: add more page size support */
break;
/* TODO: add more ecc strength support */
default:
dev_err(dev, "not support strength: %d\n", chip->ecc.strength);
return -EINVAL;
}
flag = hinfc_read(host, HINFC504_CON);
/* add ecc type configure */
flag |= ((ecc_bits & HINFC504_CON_ECCTYPE_MASK)
<< HINFC504_CON_ECCTYPE_SHIFT);
hinfc_write(host, flag, HINFC504_CON);
/* enable ecc irq */
flag = hinfc_read(host, HINFC504_INTEN) & 0xfff;
hinfc_write(host, flag | HINFC504_INTEN_UE | HINFC504_INTEN_CE,
HINFC504_INTEN);
return 0;
}
static int hisi_nfc_probe(struct platform_device *pdev)
{
int ret = 0, irq, buswidth, flag, max_chips = HINFC504_MAX_CHIP;
struct device *dev = &pdev->dev;
struct hinfc_host *host;
struct nand_chip *chip;
struct mtd_info *mtd;
struct resource *res;
struct device_node *np = dev->of_node;
struct mtd_part_parser_data ppdata;
host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
if (!host)
return -ENOMEM;
host->dev = dev;
platform_set_drvdata(pdev, host);
chip = &host->chip;
mtd = &host->mtd;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "no IRQ resource defined\n");
ret = -ENXIO;
goto err_res;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
host->iobase = devm_ioremap_resource(dev, res);
if (IS_ERR(host->iobase)) {
ret = PTR_ERR(host->iobase);
goto err_res;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
host->mmio = devm_ioremap_resource(dev, res);
if (IS_ERR(host->mmio)) {
ret = PTR_ERR(host->mmio);
dev_err(dev, "devm_ioremap_resource[1] fail\n");
goto err_res;
}
mtd->priv = chip;
mtd->owner = THIS_MODULE;
mtd->name = "hisi_nand";
mtd->dev.parent = &pdev->dev;
chip->priv = host;
chip->cmdfunc = hisi_nfc_cmdfunc;
chip->select_chip = hisi_nfc_select_chip;
chip->read_byte = hisi_nfc_read_byte;
chip->read_word = hisi_nfc_read_word;
chip->write_buf = hisi_nfc_write_buf;
chip->read_buf = hisi_nfc_read_buf;
chip->chip_delay = HINFC504_CHIP_DELAY;
chip->ecc.mode = of_get_nand_ecc_mode(np);
buswidth = of_get_nand_bus_width(np);
if (buswidth == 16)
chip->options |= NAND_BUSWIDTH_16;
hisi_nfc_host_init(host);
ret = devm_request_irq(dev, irq, hinfc_irq_handle, IRQF_DISABLED,
"nandc", host);
if (ret) {
dev_err(dev, "failed to request IRQ\n");
goto err_res;
}
ret = nand_scan_ident(mtd, max_chips, NULL);
if (ret) {
ret = -ENODEV;
goto err_res;
}
host->buffer = dmam_alloc_coherent(dev, mtd->writesize + mtd->oobsize,
&host->dma_buffer, GFP_KERNEL);
if (!host->buffer) {
ret = -ENOMEM;
goto err_res;
}
host->dma_oob = host->dma_buffer + mtd->writesize;
memset(host->buffer, 0xff, mtd->writesize + mtd->oobsize);
flag = hinfc_read(host, HINFC504_CON);
flag &= ~(HINFC504_CON_PAGESIZE_MASK << HINFC504_CON_PAGEISZE_SHIFT);
switch (mtd->writesize) {
case 2048:
flag |= (0x001 << HINFC504_CON_PAGEISZE_SHIFT); break;
/*
* TODO: add more pagesize support,
* default pagesize has been set in hisi_nfc_host_init
*/
default:
dev_err(dev, "NON-2KB page size nand flash\n");
ret = -EINVAL;
goto err_res;
}
hinfc_write(host, flag, HINFC504_CON);
if (chip->ecc.mode == NAND_ECC_HW)
hisi_nfc_ecc_probe(host);
ret = nand_scan_tail(mtd);
if (ret) {
dev_err(dev, "nand_scan_tail failed: %d\n", ret);
goto err_res;
}
ppdata.of_node = np;
ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
if (ret) {
dev_err(dev, "Err MTD partition=%d\n", ret);
goto err_mtd;
}
return 0;
err_mtd:
nand_release(mtd);
err_res:
return ret;
}
static int hisi_nfc_remove(struct platform_device *pdev)
{
struct hinfc_host *host = platform_get_drvdata(pdev);
struct mtd_info *mtd = &host->mtd;
nand_release(mtd);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int hisi_nfc_suspend(struct device *dev)
{
struct hinfc_host *host = dev_get_drvdata(dev);
unsigned long timeout = jiffies + HINFC504_NFC_PM_TIMEOUT;
while (time_before(jiffies, timeout)) {
if (((hinfc_read(host, HINFC504_STATUS) & 0x1) == 0x0) &&
(hinfc_read(host, HINFC504_DMA_CTRL) &
HINFC504_DMA_CTRL_DMA_START)) {
cond_resched();
return 0;
}
}
dev_err(host->dev, "nand controller suspend timeout.\n");
return -EAGAIN;
}
static int hisi_nfc_resume(struct device *dev)
{
int cs;
struct hinfc_host *host = dev_get_drvdata(dev);
struct nand_chip *chip = &host->chip;
for (cs = 0; cs < chip->numchips; cs++)
hisi_nfc_send_cmd_reset(host, cs);
hinfc_write(host, SET_HINFC504_PWIDTH(HINFC504_W_LATCH,
HINFC504_R_LATCH, HINFC504_RW_LATCH), HINFC504_PWIDTH);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(hisi_nfc_pm_ops, hisi_nfc_suspend, hisi_nfc_resume);
static const struct of_device_id nfc_id_table[] = {
{ .compatible = "hisilicon,504-nfc" },
{}
};
MODULE_DEVICE_TABLE(of, nfc_id_table);
static struct platform_driver hisi_nfc_driver = {
.driver = {
.name = "hisi_nand",
.of_match_table = nfc_id_table,
.pm = &hisi_nfc_pm_ops,
},
.probe = hisi_nfc_probe,
.remove = hisi_nfc_remove,
};
module_platform_driver(hisi_nfc_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Zhou Wang");
MODULE_AUTHOR("Zhiyong Cai");
MODULE_DESCRIPTION("Hisilicon Nand Flash Controller Driver");

29
drivers/mtd/nand/jz4740_nand.c
Просмотреть файл

@ -69,7 +69,7 @@ struct jz_nand {
int selected_bank;
struct jz_nand_platform_data *pdata;
struct gpio_desc *busy_gpio;
bool is_reading;
};
@ -131,7 +131,7 @@ static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
static int jz_nand_dev_ready(struct mtd_info *mtd)
{
struct jz_nand *nand = mtd_to_jz_nand(mtd);
return gpio_get_value_cansleep(nand->pdata->busy_gpio);
return gpiod_get_value_cansleep(nand->busy_gpio);
}
static void jz_nand_hwctl(struct mtd_info *mtd, int mode)
@ -423,14 +423,12 @@ static int jz_nand_probe(struct platform_device *pdev)
if (ret)
goto err_free;
if (pdata && gpio_is_valid(pdata->busy_gpio)) {
ret = gpio_request(pdata->busy_gpio, "NAND busy pin");
if (ret) {
dev_err(&pdev->dev,
"Failed to request busy gpio %d: %d\n",
pdata->busy_gpio, ret);
goto err_iounmap_mmio;
}
nand->busy_gpio = devm_gpiod_get_optional(&pdev->dev, "busy", GPIOD_IN);
if (IS_ERR(nand->busy_gpio)) {
ret = PTR_ERR(nand->busy_gpio);
dev_err(&pdev->dev, "Failed to request busy gpio %d\n",
ret);
goto err_iounmap_mmio;
}
mtd = &nand->mtd;
@ -454,10 +452,9 @@ static int jz_nand_probe(struct platform_device *pdev)
chip->cmd_ctrl = jz_nand_cmd_ctrl;
chip->select_chip = jz_nand_select_chip;
if (pdata && gpio_is_valid(pdata->busy_gpio))
if (nand->busy_gpio)
chip->dev_ready = jz_nand_dev_ready;
nand->pdata = pdata;
platform_set_drvdata(pdev, nand);
/* We are going to autodetect NAND chips in the banks specified in the
@ -496,7 +493,7 @@ static int jz_nand_probe(struct platform_device *pdev)
}
if (chipnr == 0) {
dev_err(&pdev->dev, "No NAND chips found\n");
goto err_gpio_busy;
goto err_iounmap_mmio;
}
if (pdata && pdata->ident_callback) {
@ -533,9 +530,6 @@ err_unclaim_banks:
nand->bank_base[bank - 1]);
}
writel(0, nand->base + JZ_REG_NAND_CTRL);
err_gpio_busy:
if (pdata && gpio_is_valid(pdata->busy_gpio))
gpio_free(pdata->busy_gpio);
err_iounmap_mmio:
jz_nand_iounmap_resource(nand->mem, nand->base);
err_free:
@ -546,7 +540,6 @@ err_free:
static int jz_nand_remove(struct platform_device *pdev)
{
struct jz_nand *nand = platform_get_drvdata(pdev);
struct jz_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
size_t i;
nand_release(&nand->mtd);
@ -562,8 +555,6 @@ static int jz_nand_remove(struct platform_device *pdev)
gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
}
}
if (pdata && gpio_is_valid(pdata->busy_gpio))
gpio_free(pdata->busy_gpio);
jz_nand_iounmap_resource(nand->mem, nand->base);

31
drivers/mtd/nand/nand_base.c
Просмотреть файл

@ -156,7 +156,6 @@ static uint8_t nand_read_byte(struct mtd_info *mtd)
}
/**
* nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
* nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
* @mtd: MTD device structure
*
@ -1751,11 +1750,10 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
int page)
{
uint8_t *buf = chip->oob_poi;
int length = mtd->oobsize;
int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
int eccsize = chip->ecc.size;
uint8_t *bufpoi = buf;
uint8_t *bufpoi = chip->oob_poi;
int i, toread, sndrnd = 0, pos;
chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page);
@ -2944,6 +2942,16 @@ static void nand_resume(struct mtd_info *mtd)
__func__);
}
/**
* nand_shutdown - [MTD Interface] Finish the current NAND operation and
* prevent further operations
* @mtd: MTD device structure
*/
static void nand_shutdown(struct mtd_info *mtd)
{
nand_get_device(mtd, FL_SHUTDOWN);
}
/* Set default functions */
static void nand_set_defaults(struct nand_chip *chip, int busw)
{
@ -4028,22 +4036,24 @@ int nand_scan_tail(struct mtd_info *mtd)
ecc->read_oob = nand_read_oob_std;
ecc->write_oob = nand_write_oob_std;
/*
* Board driver should supply ecc.size and ecc.bytes values to
* select how many bits are correctable; see nand_bch_init()
* for details. Otherwise, default to 4 bits for large page
* devices.
* Board driver should supply ecc.size and ecc.strength values
* to select how many bits are correctable. Otherwise, default
* to 4 bits for large page devices.
*/
if (!ecc->size && (mtd->oobsize >= 64)) {
ecc->size = 512;
ecc->bytes = DIV_ROUND_UP(13 * ecc->strength, 8);
ecc->strength = 4;
}
/* See nand_bch_init() for details. */
ecc->bytes = DIV_ROUND_UP(
ecc->strength * fls(8 * ecc->size), 8);
ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
&ecc->layout);
if (!ecc->priv) {
pr_warn("BCH ECC initialization failed!\n");
BUG();
}
ecc->strength = ecc->bytes * 8 / fls(8 * ecc->size);
break;
case NAND_ECC_NONE:
@ -4146,6 +4156,7 @@ int nand_scan_tail(struct mtd_info *mtd)
mtd->_unlock = NULL;
mtd->_suspend = nand_suspend;
mtd->_resume = nand_resume;
mtd->_reboot = nand_shutdown;
mtd->_block_isreserved = nand_block_isreserved;
mtd->_block_isbad = nand_block_isbad;
mtd->_block_markbad = nand_block_markbad;
@ -4161,7 +4172,7 @@ int nand_scan_tail(struct mtd_info *mtd)
* properly set.
*/
if (!mtd->bitflip_threshold)
mtd->bitflip_threshold = mtd->ecc_strength;
mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4);
/* Check, if we should skip the bad block table scan */
if (chip->options & NAND_SKIP_BBTSCAN)

7
drivers/mtd/nand/nandsim.c
Просмотреть файл

@ -245,7 +245,6 @@ MODULE_PARM_DESC(bch, "Enable BCH ecc and set how many bits should "
#define STATE_DATAOUT 0x00001000 /* waiting for page data output */
#define STATE_DATAOUT_ID 0x00002000 /* waiting for ID bytes output */
#define STATE_DATAOUT_STATUS 0x00003000 /* waiting for status output */
#define STATE_DATAOUT_STATUS_M 0x00004000 /* waiting for multi-plane status output */
#define STATE_DATAOUT_MASK 0x00007000 /* data output states mask */
/* Previous operation is done, ready to accept new requests */
@ -269,7 +268,6 @@ MODULE_PARM_DESC(bch, "Enable BCH ecc and set how many bits should "
#define OPT_ANY 0xFFFFFFFF /* any chip supports this operation */
#define OPT_PAGE512 0x00000002 /* 512-byte page chips */
#define OPT_PAGE2048 0x00000008 /* 2048-byte page chips */
#define OPT_SMARTMEDIA 0x00000010 /* SmartMedia technology chips */
#define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
#define OPT_PAGE4096 0x00000080 /* 4096-byte page chips */
#define OPT_LARGEPAGE (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */
@ -1096,8 +1094,6 @@ static char *get_state_name(uint32_t state)
return "STATE_DATAOUT_ID";
case STATE_DATAOUT_STATUS:
return "STATE_DATAOUT_STATUS";
case STATE_DATAOUT_STATUS_M:
return "STATE_DATAOUT_STATUS_M";
case STATE_READY:
return "STATE_READY";
case STATE_UNKNOWN:
@ -1865,7 +1861,6 @@ static void switch_state(struct nandsim *ns)
break;
case STATE_DATAOUT_STATUS:
case STATE_DATAOUT_STATUS_M:
ns->regs.count = ns->regs.num = 0;
break;
@ -2005,7 +2000,6 @@ static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
}
if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS
|| NS_STATE(ns->state) == STATE_DATAOUT_STATUS_M
|| NS_STATE(ns->state) == STATE_DATAOUT) {
int row = ns->regs.row;
@ -2343,6 +2337,7 @@ static int __init ns_init_module(void)
}
chip->ecc.mode = NAND_ECC_SOFT_BCH;
chip->ecc.size = 512;
chip->ecc.strength = bch;
chip->ecc.bytes = eccbytes;
NS_INFO("using %u-bit/%u bytes BCH ECC\n", bch, chip->ecc.size);
}

31
drivers/mtd/nand/omap2.c
Просмотреть файл

@ -1048,10 +1048,9 @@ static int omap_dev_ready(struct mtd_info *mtd)
* @mtd: MTD device structure
* @mode: Read/Write mode
*
* When using BCH, sector size is hardcoded to 512 bytes.
* Using wrapping mode 6 both for reading and writing if ELM module not uses
* for error correction.
* On writing,
* When using BCH with SW correction (i.e. no ELM), sector size is set
* to 512 bytes and we use BCH_WRAPMODE_6 wrapping mode
* for both reading and writing with:
* eccsize0 = 0 (no additional protected byte in spare area)
* eccsize1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
*/
@ -1071,15 +1070,9 @@ static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd, int mode)
case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
bch_type = 0;
nsectors = 1;
if (mode == NAND_ECC_READ) {
wr_mode = BCH_WRAPMODE_6;
ecc_size0 = BCH_ECC_SIZE0;
ecc_size1 = BCH_ECC_SIZE1;
} else {
wr_mode = BCH_WRAPMODE_6;
ecc_size0 = BCH_ECC_SIZE0;
ecc_size1 = BCH_ECC_SIZE1;
}
wr_mode = BCH_WRAPMODE_6;
ecc_size0 = BCH_ECC_SIZE0;
ecc_size1 = BCH_ECC_SIZE1;
break;
case OMAP_ECC_BCH4_CODE_HW:
bch_type = 0;
@ -1097,15 +1090,9 @@ static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd, int mode)
case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
bch_type = 1;
nsectors = 1;
if (mode == NAND_ECC_READ) {
wr_mode = BCH_WRAPMODE_6;
ecc_size0 = BCH_ECC_SIZE0;
ecc_size1 = BCH_ECC_SIZE1;
} else {
wr_mode = BCH_WRAPMODE_6;
ecc_size0 = BCH_ECC_SIZE0;
ecc_size1 = BCH_ECC_SIZE1;
}
wr_mode = BCH_WRAPMODE_6;
ecc_size0 = BCH_ECC_SIZE0;
ecc_size1 = BCH_ECC_SIZE1;
break;
case OMAP_ECC_BCH8_CODE_HW:
bch_type = 1;

2
drivers/mtd/nand/sunxi_nand.c
Просмотреть файл

@ -1110,8 +1110,6 @@ static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
switch (ecc->mode) {
case NAND_ECC_SOFT_BCH:
ecc->bytes = DIV_ROUND_UP(ecc->strength * fls(8 * ecc->size),
8);
break;
case NAND_ECC_HW:
ret = sunxi_nand_hw_ecc_ctrl_init(mtd, ecc, np);

18
drivers/mtd/nftlmount.c
Просмотреть файл

@ -89,9 +89,10 @@ static int find_boot_record(struct NFTLrecord *nftl)
}
/* To be safer with BIOS, also use erase mark as discriminant */
if ((ret = nftl_read_oob(mtd, block * nftl->EraseSize +
ret = nftl_read_oob(mtd, block * nftl->EraseSize +
SECTORSIZE + 8, 8, &retlen,
(char *)&h1) < 0)) {
(char *)&h1);
if (ret < 0) {
printk(KERN_WARNING "ANAND header found at 0x%x in mtd%d, but OOB data read failed (err %d)\n",
block * nftl->EraseSize, nftl->mbd.mtd->index, ret);
continue;
@ -109,8 +110,9 @@ static int find_boot_record(struct NFTLrecord *nftl)
}
/* Finally reread to check ECC */
if ((ret = mtd->read(mtd, block * nftl->EraseSize, SECTORSIZE,
&retlen, buf) < 0)) {
ret = mtd->read(mtd, block * nftl->EraseSize, SECTORSIZE,
&retlen, buf);
if (ret < 0) {
printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but ECC read failed (err %d)\n",
block * nftl->EraseSize, nftl->mbd.mtd->index, ret);
continue;
@ -228,9 +230,11 @@ device is already correct.
The new DiskOnChip driver already scanned the bad block table. Just query it.
if ((i & (SECTORSIZE - 1)) == 0) {
/* read one sector for every SECTORSIZE of blocks */
if ((ret = mtd->read(nftl->mbd.mtd, block * nftl->EraseSize +
i + SECTORSIZE, SECTORSIZE, &retlen,
buf)) < 0) {
ret = mtd->read(nftl->mbd.mtd,
block * nftl->EraseSize + i +
SECTORSIZE, SECTORSIZE,
&retlen, buf);
if (ret < 0) {
printk(KERN_NOTICE "Read of bad sector table failed (err %d)\n",
ret);
kfree(nftl->ReplUnitTable);

93
drivers/mtd/spi-nor/fsl-quadspi.c
Просмотреть файл

@ -57,7 +57,9 @@
#define QUADSPI_BUF3CR 0x1c
#define QUADSPI_BUF3CR_ALLMST_SHIFT 31
#define QUADSPI_BUF3CR_ALLMST (1 << QUADSPI_BUF3CR_ALLMST_SHIFT)
#define QUADSPI_BUF3CR_ALLMST_MASK (1 << QUADSPI_BUF3CR_ALLMST_SHIFT)
#define QUADSPI_BUF3CR_ADATSZ_SHIFT 8
#define QUADSPI_BUF3CR_ADATSZ_MASK (0xFF << QUADSPI_BUF3CR_ADATSZ_SHIFT)
#define QUADSPI_BFGENCR 0x20
#define QUADSPI_BFGENCR_PAR_EN_SHIFT 16
@ -198,18 +200,21 @@ struct fsl_qspi_devtype_data {
enum fsl_qspi_devtype devtype;
int rxfifo;
int txfifo;
int ahb_buf_size;
};
static struct fsl_qspi_devtype_data vybrid_data = {
.devtype = FSL_QUADSPI_VYBRID,
.rxfifo = 128,
.txfifo = 64
.txfifo = 64,
.ahb_buf_size = 1024
};
static struct fsl_qspi_devtype_data imx6sx_data = {
.devtype = FSL_QUADSPI_IMX6SX,
.rxfifo = 128,
.txfifo = 512
.txfifo = 512,
.ahb_buf_size = 1024
};
#define FSL_QSPI_MAX_CHIP 4
@ -227,6 +232,7 @@ struct fsl_qspi {
u32 nor_num;
u32 clk_rate;
unsigned int chip_base_addr; /* We may support two chips. */
bool has_second_chip;
};
static inline int is_vybrid_qspi(struct fsl_qspi *q)
@ -583,7 +589,12 @@ static void fsl_qspi_init_abh_read(struct fsl_qspi *q)
writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR);
writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR);
writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR);
writel(QUADSPI_BUF3CR_ALLMST, base + QUADSPI_BUF3CR);
/*
* Set ADATSZ with the maximum AHB buffer size to improve the
* read performance.
*/
writel(QUADSPI_BUF3CR_ALLMST_MASK | ((q->devtype_data->ahb_buf_size / 8)
<< QUADSPI_BUF3CR_ADATSZ_SHIFT), base + QUADSPI_BUF3CR);
/* We only use the buffer3 */
writel(0, base + QUADSPI_BUF0IND);
@ -783,7 +794,6 @@ static int fsl_qspi_probe(struct platform_device *pdev)
struct spi_nor *nor;
struct mtd_info *mtd;
int ret, i = 0;
bool has_second_chip = false;
const struct of_device_id *of_id =
of_match_device(fsl_qspi_dt_ids, &pdev->dev);
@ -798,37 +808,30 @@ static int fsl_qspi_probe(struct platform_device *pdev)
/* find the resources */
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI");
q->iobase = devm_ioremap_resource(dev, res);
if (IS_ERR(q->iobase)) {
ret = PTR_ERR(q->iobase);
goto map_failed;
}
if (IS_ERR(q->iobase))
return PTR_ERR(q->iobase);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"QuadSPI-memory");
q->ahb_base = devm_ioremap_resource(dev, res);
if (IS_ERR(q->ahb_base)) {
ret = PTR_ERR(q->ahb_base);
goto map_failed;
}
if (IS_ERR(q->ahb_base))
return PTR_ERR(q->ahb_base);
q->memmap_phy = res->start;
/* find the clocks */
q->clk_en = devm_clk_get(dev, "qspi_en");
if (IS_ERR(q->clk_en)) {
ret = PTR_ERR(q->clk_en);
goto map_failed;
}
if (IS_ERR(q->clk_en))
return PTR_ERR(q->clk_en);
q->clk = devm_clk_get(dev, "qspi");
if (IS_ERR(q->clk)) {
ret = PTR_ERR(q->clk);
goto map_failed;
}
if (IS_ERR(q->clk))
return PTR_ERR(q->clk);
ret = clk_prepare_enable(q->clk_en);
if (ret) {
dev_err(dev, "can not enable the qspi_en clock\n");
goto map_failed;
return ret;
}
ret = clk_prepare_enable(q->clk);
@ -860,14 +863,14 @@ static int fsl_qspi_probe(struct platform_device *pdev)
goto irq_failed;
if (of_get_property(np, "fsl,qspi-has-second-chip", NULL))
has_second_chip = true;
q->has_second_chip = true;
/* iterate the subnodes. */
for_each_available_child_of_node(dev->of_node, np) {
char modalias[40];
/* skip the holes */
if (!has_second_chip)
if (!q->has_second_chip)
i *= 2;
nor = &q->nor[i];
@ -890,24 +893,24 @@ static int fsl_qspi_probe(struct platform_device *pdev)
ret = of_modalias_node(np, modalias, sizeof(modalias));
if (ret < 0)
goto map_failed;
goto irq_failed;
ret = of_property_read_u32(np, "spi-max-frequency",
&q->clk_rate);
if (ret < 0)
goto map_failed;
goto irq_failed;
/* set the chip address for READID */
fsl_qspi_set_base_addr(q, nor);
ret = spi_nor_scan(nor, modalias, SPI_NOR_QUAD);
if (ret)
goto map_failed;
goto irq_failed;
ppdata.of_node = np;
ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
if (ret)
goto map_failed;
goto irq_failed;
/* Set the correct NOR size now. */
if (q->nor_size == 0) {
@ -939,19 +942,19 @@ static int fsl_qspi_probe(struct platform_device *pdev)
clk_disable(q->clk);
clk_disable(q->clk_en);
dev_info(dev, "QuadSPI SPI NOR flash driver\n");
return 0;
last_init_failed:
for (i = 0; i < q->nor_num; i++)
for (i = 0; i < q->nor_num; i++) {
/* skip the holes */
if (!q->has_second_chip)
i *= 2;
mtd_device_unregister(&q->mtd[i]);
}
irq_failed:
clk_disable_unprepare(q->clk);
clk_failed:
clk_disable_unprepare(q->clk_en);
map_failed:
dev_err(dev, "Freescale QuadSPI probe failed\n");
return ret;
}
@ -960,8 +963,12 @@ static int fsl_qspi_remove(struct platform_device *pdev)
struct fsl_qspi *q = platform_get_drvdata(pdev);
int i;
for (i = 0; i < q->nor_num; i++)
for (i = 0; i < q->nor_num; i++) {
/* skip the holes */
if (!q->has_second_chip)
i *= 2;
mtd_device_unregister(&q->mtd[i]);
}
/* disable the hardware */
writel(QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR);
@ -972,6 +979,22 @@ static int fsl_qspi_remove(struct platform_device *pdev)
return 0;
}
static int fsl_qspi_suspend(struct platform_device *pdev, pm_message_t state)
{
return 0;
}
static int fsl_qspi_resume(struct platform_device *pdev)
{
struct fsl_qspi *q = platform_get_drvdata(pdev);
fsl_qspi_nor_setup(q);
fsl_qspi_set_map_addr(q);
fsl_qspi_nor_setup_last(q);
return 0;
}
static struct platform_driver fsl_qspi_driver = {
.driver = {
.name = "fsl-quadspi",
@ -980,6 +1003,8 @@ static struct platform_driver fsl_qspi_driver = {
},
.probe = fsl_qspi_probe,
.remove = fsl_qspi_remove,
.suspend = fsl_qspi_suspend,
.resume = fsl_qspi_resume,
};
module_platform_driver(fsl_qspi_driver);

63
drivers/mtd/spi-nor/spi-nor.c
Просмотреть файл

@ -538,6 +538,7 @@ static const struct spi_device_id spi_nor_ids[] = {
/* GigaDevice */
{ "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) },
{ "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128, SECT_4K) },
{ "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256, SECT_4K) },
/* Intel/Numonyx -- xxxs33b */
{ "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) },
@ -560,14 +561,14 @@ static const struct spi_device_id spi_nor_ids[] = {
{ "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
/* Micron */
{ "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) },
{ "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) },
{ "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, 0) },
{ "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) },
{ "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) },
{ "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) },
{ "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, USE_FSR) },
{ "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, USE_FSR) },
{ "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
{ "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SPI_NOR_QUAD_READ) },
{ "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) },
{ "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) },
{ "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
{ "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
{ "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
/* PMC */
{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
@ -891,6 +892,45 @@ static int spansion_quad_enable(struct spi_nor *nor)
return 0;
}
static int micron_quad_enable(struct spi_nor *nor)
{
int ret;
u8 val;
ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1);
if (ret < 0) {
dev_err(nor->dev, "error %d reading EVCR\n", ret);
return ret;
}
write_enable(nor);
/* set EVCR, enable quad I/O */
nor->cmd_buf[0] = val & ~EVCR_QUAD_EN_MICRON;
ret = nor->write_reg(nor, SPINOR_OP_WD_EVCR, nor->cmd_buf, 1, 0);
if (ret < 0) {
dev_err(nor->dev, "error while writing EVCR register\n");
return ret;
}
ret = spi_nor_wait_till_ready(nor);
if (ret)
return ret;
/* read EVCR and check it */
ret = nor->read_reg(nor, SPINOR_OP_RD_EVCR, &val, 1);
if (ret < 0) {
dev_err(nor->dev, "error %d reading EVCR\n", ret);
return ret;
}
if (val & EVCR_QUAD_EN_MICRON) {
dev_err(nor->dev, "Micron EVCR Quad bit not clear\n");
return -EINVAL;
}
return 0;
}
static int set_quad_mode(struct spi_nor *nor, struct flash_info *info)
{
int status;
@ -903,6 +943,13 @@ static int set_quad_mode(struct spi_nor *nor, struct flash_info *info)
return -EINVAL;
}
return status;
case CFI_MFR_ST:
status = micron_quad_enable(nor);
if (status) {
dev_err(nor->dev, "Micron quad-read not enabled\n");
return -EINVAL;
}
return status;
default:
status = spansion_quad_enable(nor);
if (status) {

5
fs/jffs2/compr_rubin.c
Просмотреть файл

@ -84,11 +84,6 @@ static inline int pullbit(struct pushpull *pp)
return bit;
}
static inline int pulledbits(struct pushpull *pp)
{
return pp->ofs;
}
static void init_rubin(struct rubin_state *rs, int div, int *bits)
{

5
fs/jffs2/scan.c
Просмотреть файл

@ -510,6 +510,10 @@ static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblo
sumlen = c->sector_size - je32_to_cpu(sm->offset);
sumptr = buf + buf_size - sumlen;
/* sm->offset maybe wrong but MAGIC maybe right */
if (sumlen > c->sector_size)
goto full_scan;
/* Now, make sure the summary itself is available */
if (sumlen > buf_size) {
/* Need to kmalloc for this. */
@ -544,6 +548,7 @@ static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblo
}
}
full_scan:
buf_ofs = jeb->offset;
if (!buf_size) {

1
include/linux/mtd/mtd.h
Просмотреть файл

@ -227,6 +227,7 @@ struct mtd_info {
int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
int (*_suspend) (struct mtd_info *mtd);
void (*_resume) (struct mtd_info *mtd);
void (*_reboot) (struct mtd_info *mtd);
/*
* If the driver is something smart, like UBI, it may need to maintain
* its own reference counting. The below functions are only for driver.

7
include/linux/mtd/spi-nor.h
Просмотреть файл

@ -56,6 +56,10 @@
/* Used for Spansion flashes only. */
#define SPINOR_OP_BRWR 0x17 /* Bank register write */
/* Used for Micron flashes only. */
#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */
#define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */
/* Status Register bits. */
#define SR_WIP 1 /* Write in progress */
#define SR_WEL 2 /* Write enable latch */
@ -67,6 +71,9 @@
#define SR_QUAD_EN_MX 0x40 /* Macronix Quad I/O */
/* Enhanced Volatile Configuration Register bits */
#define EVCR_QUAD_EN_MICRON 0x80 /* Micron Quad I/O */
/* Flag Status Register bits */
#define FSR_READY 0x80