gpio/mxs: add device tree probe
It adds device tree probe for gpio-mxs driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Родитель
164387d2b4
Коммит
4052d45e80
|
@ -0,0 +1,87 @@
|
|||
* Freescale MXS GPIO controller
|
||||
|
||||
The Freescale MXS GPIO controller is part of MXS PIN controller. The
|
||||
GPIOs are organized in port/bank. Each port consists of 32 GPIOs.
|
||||
|
||||
As the GPIO controller is embedded in the PIN controller and all the
|
||||
GPIO ports share the same IO space with PIN controller, the GPIO node
|
||||
will be represented as sub-nodes of MXS pinctrl node.
|
||||
|
||||
Required properties for GPIO node:
|
||||
- compatible : Should be "fsl,<soc>-gpio". The supported SoCs include
|
||||
imx23 and imx28.
|
||||
- interrupts : Should be the port interrupt shared by all 32 pins.
|
||||
- gpio-controller : Marks the device node as a gpio controller.
|
||||
- #gpio-cells : Should be two. The first cell is the pin number and
|
||||
the second cell is used to specify optional parameters (currently
|
||||
unused).
|
||||
- interrupt-controller: Marks the device node as an interrupt controller.
|
||||
- #interrupt-cells : Should be 2. The first cell is the GPIO number.
|
||||
The second cell bits[3:0] is used to specify trigger type and level flags:
|
||||
1 = low-to-high edge triggered.
|
||||
2 = high-to-low edge triggered.
|
||||
4 = active high level-sensitive.
|
||||
8 = active low level-sensitive.
|
||||
|
||||
Note: Each GPIO port should have an alias correctly numbered in "aliases"
|
||||
node.
|
||||
|
||||
Examples:
|
||||
|
||||
aliases {
|
||||
gpio0 = &gpio0;
|
||||
gpio1 = &gpio1;
|
||||
gpio2 = &gpio2;
|
||||
gpio3 = &gpio3;
|
||||
gpio4 = &gpio4;
|
||||
};
|
||||
|
||||
pinctrl@80018000 {
|
||||
compatible = "fsl,imx28-pinctrl", "simple-bus";
|
||||
reg = <0x80018000 2000>;
|
||||
|
||||
gpio0: gpio@0 {
|
||||
compatible = "fsl,imx28-gpio";
|
||||
interrupts = <127>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpio1: gpio@1 {
|
||||
compatible = "fsl,imx28-gpio";
|
||||
interrupts = <126>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpio2: gpio@2 {
|
||||
compatible = "fsl,imx28-gpio";
|
||||
interrupts = <125>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpio3: gpio@3 {
|
||||
compatible = "fsl,imx28-gpio";
|
||||
interrupts = <124>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpio4: gpio@4 {
|
||||
compatible = "fsl,imx28-gpio";
|
||||
interrupts = <123>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
|
@ -25,6 +25,9 @@
|
|||
#include <linux/io.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_address.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/basic_mmio_gpio.h>
|
||||
|
@ -207,8 +210,19 @@ static struct platform_device_id mxs_gpio_ids[] = {
|
|||
};
|
||||
MODULE_DEVICE_TABLE(platform, mxs_gpio_ids);
|
||||
|
||||
static const struct of_device_id mxs_gpio_dt_ids[] = {
|
||||
{ .compatible = "fsl,imx23-gpio", .data = (void *) IMX23_GPIO, },
|
||||
{ .compatible = "fsl,imx28-gpio", .data = (void *) IMX28_GPIO, },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, mxs_gpio_dt_ids);
|
||||
|
||||
static int __devinit mxs_gpio_probe(struct platform_device *pdev)
|
||||
{
|
||||
const struct of_device_id *of_id =
|
||||
of_match_device(mxs_gpio_dt_ids, &pdev->dev);
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
struct device_node *parent;
|
||||
static void __iomem *base;
|
||||
struct mxs_gpio_port *port;
|
||||
struct resource *iores = NULL;
|
||||
|
@ -218,8 +232,15 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev)
|
|||
if (!port)
|
||||
return -ENOMEM;
|
||||
|
||||
port->id = pdev->id;
|
||||
port->devid = pdev->id_entry->driver_data;
|
||||
if (np) {
|
||||
port->id = of_alias_get_id(np, "gpio");
|
||||
if (port->id < 0)
|
||||
return port->id;
|
||||
port->devid = (enum mxs_gpio_id) of_id->data;
|
||||
} else {
|
||||
port->id = pdev->id;
|
||||
port->devid = pdev->id_entry->driver_data;
|
||||
}
|
||||
port->virtual_irq_start = MXS_GPIO_IRQ_START + port->id * 32;
|
||||
|
||||
port->irq = platform_get_irq(pdev, 0);
|
||||
|
@ -231,8 +252,14 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev)
|
|||
* share the same one
|
||||
*/
|
||||
if (!base) {
|
||||
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
base = devm_request_and_ioremap(&pdev->dev, iores);
|
||||
if (np) {
|
||||
parent = of_get_parent(np);
|
||||
base = of_iomap(parent, 0);
|
||||
of_node_put(parent);
|
||||
} else {
|
||||
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
base = devm_request_and_ioremap(&pdev->dev, iores);
|
||||
}
|
||||
if (!base)
|
||||
return -EADDRNOTAVAIL;
|
||||
}
|
||||
|
@ -278,6 +305,7 @@ static struct platform_driver mxs_gpio_driver = {
|
|||
.driver = {
|
||||
.name = "gpio-mxs",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = mxs_gpio_dt_ids,
|
||||
},
|
||||
.probe = mxs_gpio_probe,
|
||||
.id_table = mxs_gpio_ids,
|
||||
|
|
Загрузка…
Ссылка в новой задаче