ARM: SAMSUNG: Fix typos

Fix some language typos in comments.

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

arch/arm/mach-s3c24xx/include/mach/regs-gpio.h

@@ -520,7 +520,7 @@
 #define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
 #define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
 
-/* interrupt filtering conrrol for EINT16..EINT23 */
+/* interrupt filtering control for EINT16..EINT23 */
 #define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
 #define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
 #define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)

arch/arm/mach-s3c24xx/iotiming-s3c2410.c

@@ -423,7 +423,7 @@ void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
  * @timings: The IO timing information to fill out.
  *
  * Calculate the @timings timing information from the current frequency
- * information in @cfg, and the new frequency configur
+ * information in @cfg, and the new frequency configuration
  * through all the IO banks, reading the state and then updating @iot
  * as necessary.
  *

arch/arm/mach-s3c24xx/mach-n30.c

@@ -522,7 +522,7 @@ static void __init n30_hwinit(void)
 	 *
 	 * The pull ups for H6/H7 are enabled on N30 but not on the
 	 * N35/PiN.  I suppose is useful for a budget model of the N30
-	 * with no bluetooh.  It doesn't hurt to have the pull ups
+	 * with no bluetooth.  It doesn't hurt to have the pull ups
 	 * enabled on the N35, so leave them enabled for all models.
 	 */
 	__raw_writel(0x0028aaaa, S3C2410_GPHCON);

arch/arm/mach-s3c24xx/mach-osiris-dvs.c

@@ -143,7 +143,7 @@ static int osiris_dvs_remove(struct platform_device *pdev)
 	return 0;
 }
 
-/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
+/* the CONFIG_PM block is so small, it isn't worth actually compiling it
  * out if the configuration isn't set. */
 
 static int osiris_dvs_suspend(struct device *dev)

arch/arm/mach-s3c64xx/include/mach/map.h

@@ -99,7 +99,7 @@
 
 #define S3C64XX_PA_USB_HSPHY	(0x7C100000)
 
-/* compatibiltiy defines. */
+/* compatibility defines. */
 #define S3C_PA_TIMER		S3C64XX_PA_TIMER
 #define S3C_PA_HSMMC0		S3C64XX_PA_HSMMC0
 #define S3C_PA_HSMMC1		S3C64XX_PA_HSMMC1

arch/arm/plat-samsung/include/plat/cpu-freq-core.h

@@ -39,7 +39,7 @@ struct s3c2410_iobank_timing {
 	unsigned int	tacs;
 	unsigned int	tcos;
 	unsigned int	tacc;
-	unsigned int	tcoh;		/* nCS hold afrer nOE/nWE */
+	unsigned int	tcoh;		/* nCS hold after nOE/nWE */
 	unsigned int	tcah;		/* Address hold after nCS */
 	unsigned char	nwait_en;	/* nWait enabled for bank. */
 };

arch/arm/plat-samsung/include/plat/fb-s3c2410.h

@@ -48,7 +48,7 @@ struct s3c2410fb_display {
 
 struct s3c2410fb_mach_info {
 
-	struct s3c2410fb_display *displays;	/* attached diplays info */
+	struct s3c2410fb_display *displays;	/* attached displays info */
 	unsigned num_displays;			/* number of defined displays */
 	unsigned default_display;
 

arch/arm/plat-samsung/include/plat/gpio-cfg.h

@@ -35,7 +35,7 @@ struct samsung_gpio_chip;
  * struct samsung_gpio_cfg GPIO configuration
  * @cfg_eint: Configuration setting when used for external interrupt source
  * @get_pull: Read the current pull configuration for the GPIO
- * @set_pull: Set the current pull configuraiton for the GPIO
+ * @set_pull: Set the current pull configuration for the GPIO
  * @set_config: Set the current configuration for the GPIO
  * @get_config: Read the current configuration for the GPIO
  *

arch/arm/plat-samsung/pm-check.c

@@ -5,7 +5,7 @@
  *	http://armlinux.simtec.co.uk
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C Power Mangament - suspend/resume memory corruptiuon check.
+ * S3C Power Mangament - suspend/resume memory corruption check.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

arch/arm/plat-samsung/watchdog-reset.c

@@ -3,7 +3,7 @@
  * Copyright (c) 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Coyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
  *
  * Watchdog reset support for Samsung SoCs.
  *