NFC: Set the proper baud rate when trying to activate pn533 targets

We get the right baud rate from the last polled modulation.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Samuel Ortiz 2012-05-31 17:44:44 +02:00
Родитель 07922bb1e0
Коммит 41a8ec496d
1 изменённых файлов: 23 добавлений и 2 удалений

Просмотреть файл

@ -1629,6 +1629,20 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg,
return 0;
}
static int pn533_mod_to_baud(struct pn533 *dev)
{
switch (dev->poll_mod_curr) {
case PN533_POLL_MOD_106KBPS_A:
return 0;
case PN533_POLL_MOD_212KBPS_FELICA:
return 1;
case PN533_POLL_MOD_424KBPS_FELICA:
return 2;
default:
return -EINVAL;
}
}
#define PASSIVE_DATA_LEN 5
static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target,
u8 comm_mode, u8* gb, size_t gb_len)
@ -1637,7 +1651,7 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target,
struct pn533_cmd_jump_dep *cmd;
u8 cmd_len, *data_ptr;
u8 passive_data[PASSIVE_DATA_LEN] = {0x00, 0xff, 0xff, 0x00, 0x3};
int rc;
int rc, baud;
nfc_dev_dbg(&dev->interface->dev, "%s", __func__);
@ -1653,6 +1667,13 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target,
return -EBUSY;
}
baud = pn533_mod_to_baud(dev);
if (baud < 0) {
nfc_dev_err(&dev->interface->dev,
"Invalid curr modulation %d", dev->poll_mod_curr);
return baud;
}
cmd_len = sizeof(struct pn533_cmd_jump_dep) + gb_len;
if (comm_mode == NFC_COMM_PASSIVE)
cmd_len += PASSIVE_DATA_LEN;
@ -1665,7 +1686,7 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target,
cmd->active = !comm_mode;
cmd->next = 0;
cmd->baud = 2;
cmd->baud = baud;
data_ptr = cmd->data;
if (comm_mode == NFC_COMM_PASSIVE && cmd->baud > 0) {
memcpy(data_ptr, passive_data, PASSIVE_DATA_LEN);