arm64: dts: msm8996: Add device node for qcom qmp-phy for usb

Adding required device node for USB3 QMP phy present on
msm8996 chipset to enable support for the same. This phy
provides super speed usb functionality for dwc3 controller
on msm8996.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi

@@ -89,6 +89,10 @@
 			status = "okay";
 		};
 
+		phy@7410000 {
+			status = "okay";
+		};
+
 		phy@7411000 {
 			status = "okay";
 		};

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -556,6 +556,39 @@
 			};
 		};
 
+		phy@7410000 {
+			compatible = "qcom,msm8996-qmp-usb3-phy";
+			reg = <0x7410000 0x1c4>;
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+				<&gcc GCC_USB3_CLKREF_CLK>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			vdda-phy-supply = <&pm8994_l28>;
+			vdda-pll-supply = <&pm8994_l12>;
+
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				<&gcc GCC_USB3PHY_PHY_BCR>;
+			reset-names = "phy", "common";
+			status = "disabled";
+
+			ssusb_phy_0: lane@7410200 {
+				reg = <0x7410200 0x200>,
+					<0x7410400 0x130>,
+					<0x7410600 0x1a8>;
+				#phy-cells = <0>;
+
+				clock-output-names = "usb3_phy_pipe_clk_src";
+				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+			};
+		};
+
 		hsusb_phy1: phy@7411000 {
 			compatible = "qcom,msm8996-qusb2-phy";
 			reg = <0x7411000 0x180>;