V4L/DVB (10870a): remove all references for video_decoder.h

changeset 04934e44e3784a1b969582e2d59afcec278470c6 removed the last implementation
that were still using the V4L1 obsoleted header.
Now, video_decoder.h is not used anymore by any driver.

Let's remove it and all references for it in Kernel.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Documentation/feature-removal-schedule.txt

@@ -64,10 +64,10 @@ Who:	Pavel Machek <pavel@suse.cz>
 
 ---------------------------
 
-What:	Video4Linux API 1 ioctls and video_decoder.h from Video devices.
-When:	December 2008
-Files:	include/linux/video_decoder.h include/linux/videodev.h
-Check:	include/linux/video_decoder.h include/linux/videodev.h
+What:	Video4Linux API 1 ioctls and from Video devices.
+When:	July 2009
+Files:	include/linux/videodev.h
+Check:	include/linux/videodev.h
 Why:	V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6
 	series. The old API have lots of drawbacks and don't provide enough
 	means to work with all video and audio standards. The newer API is

Documentation/ioctl/ioctl-number.txt

@@ -122,7 +122,6 @@ Code	Seq#	Include File		Comments
 'c'	00-7F	linux/coda.h		conflict!
 'c'	80-9F	arch/s390/include/asm/chsc.h
 'd'	00-FF	linux/char/drm/drm/h	conflict!
-'d'	00-DF	linux/video_decoder.h	conflict!
 'd'	F0-FF	linux/digi1.h
 'e'	all	linux/digi1.h		conflict!
 'e'	00-1F	net/irda/irtty.h	conflict!

drivers/media/video/mxb.c

@@ -25,7 +25,6 @@
 
 #include <media/saa7146_vv.h>
 #include <media/tuner.h>
-#include <linux/video_decoder.h>
 #include <media/v4l2-common.h>
 #include <media/saa7115.h>
 

include/linux/Kbuild

@@ -158,7 +158,6 @@ header-y += ultrasound.h
 header-y += un.h
 header-y += utime.h
 header-y += veth.h
-header-y += video_decoder.h
 header-y += videotext.h
 header-y += x25.h
 

include/linux/video_decoder.h

@@ -1,48 +0,0 @@
-#ifndef _LINUX_VIDEO_DECODER_H
-#define _LINUX_VIDEO_DECODER_H
-
-#include <linux/types.h>
-
-#define HAVE_VIDEO_DECODER 1
-
-struct video_decoder_capability { /* this name is too long */
-	__u32	flags;
-#define	VIDEO_DECODER_PAL	1	/* can decode PAL signal */
-#define	VIDEO_DECODER_NTSC	2	/* can decode NTSC */
-#define	VIDEO_DECODER_SECAM	4	/* can decode SECAM */
-#define	VIDEO_DECODER_AUTO	8	/* can autosense norm */
-#define	VIDEO_DECODER_CCIR	16	/* CCIR-601 pixel rate (720 pixels per line) instead of square pixel rate */
-	int	inputs;			/* number of inputs */
-	int	outputs;		/* number of outputs */
-};
-
-/*
-DECODER_GET_STATUS returns the following flags.  The only one you need is
-DECODER_STATUS_GOOD, the others are just nice things to know.
-*/
-#define	DECODER_STATUS_GOOD	1	/* receiving acceptable input */
-#define	DECODER_STATUS_COLOR	2	/* receiving color information */
-#define	DECODER_STATUS_PAL	4	/* auto detected */
-#define	DECODER_STATUS_NTSC	8	/* auto detected */
-#define	DECODER_STATUS_SECAM	16	/* auto detected */
-
-struct video_decoder_init {
-	unsigned char len;
-	const unsigned char *data;
-};
-
-#define	DECODER_GET_CAPABILITIES _IOR('d', 1, struct video_decoder_capability)
-#define	DECODER_GET_STATUS    	_IOR('d', 2, int)
-#define	DECODER_SET_NORM	_IOW('d', 3, int)
-#define	DECODER_SET_INPUT	_IOW('d', 4, int)	/* 0 <= input < #inputs */
-#define	DECODER_SET_OUTPUT	_IOW('d', 5, int)	/* 0 <= output < #outputs */
-#define	DECODER_ENABLE_OUTPUT	_IOW('d', 6, int)	/* boolean output enable control */
-#define	DECODER_SET_PICTURE   	_IOW('d', 7, struct video_picture)
-#define	DECODER_SET_GPIO	_IOW('d', 8, int)	/* switch general purpose pin */
-#define	DECODER_INIT		_IOW('d', 9, struct video_decoder_init)	/* init internal registers at once */
-#define	DECODER_SET_VBI_BYPASS	_IOW('d', 10, int)	/* switch vbi bypass */
-
-#define	DECODER_DUMP		_IO('d', 192)		/* debug hook */
-
-
-#endif