be2net: fix ethtool get settings
ethtool get settings was not displaying all the settings correctly. use the get_phy_info to get more information about the PHY to fix this. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Ajit Khaparde
David S. Miller
Родитель
ac807fa8e6
Коммит
42f11cf20c
|
|
@ -313,6 +313,23 @@ struct be_vf_cfg {
|
|||
#define BE_UC_PMAC_COUNT 30
|
||||
#define BE_VF_UC_PMAC_COUNT 2
|
||||
|
||||
struct phy_info {
|
||||
u8 transceiver;
|
||||
u8 autoneg;
|
||||
u8 fc_autoneg;
|
||||
u8 port_type;
|
||||
u16 phy_type;
|
||||
u16 interface_type;
|
||||
u32 misc_params;
|
||||
u16 auto_speeds_supported;
|
||||
u16 fixed_speeds_supported;
|
||||
int link_speed;
|
||||
int forced_port_speed;
|
||||
u32 dac_cable_len;
|
||||
u32 advertising;
|
||||
u32 supported;
|
||||
};
|
||||
|
||||
struct be_adapter {
|
||||
struct pci_dev *pdev;
|
||||
struct net_device *netdev;
|
||||
|
|
@ -377,10 +394,6 @@ struct be_adapter {
|
|||
u32 rx_fc; /* Rx flow control */
|
||||
u32 tx_fc; /* Tx flow control */
|
||||
bool stats_cmd_sent;
|
||||
int link_speed;
|
||||
u8 port_type;
|
||||
u8 transceiver;
|
||||
u8 autoneg;
|
||||
u8 generation; /* BladeEngine ASIC generation */
|
||||
u32 flash_status;
|
||||
struct completion flash_compl;
|
||||
|
|
@ -392,6 +405,7 @@ struct be_adapter {
|
|||
u32 sli_family;
|
||||
u8 hba_port_num;
|
||||
u16 pvid;
|
||||
struct phy_info phy;
|
||||
u8 wol_cap;
|
||||
bool wol;
|
||||
u32 max_pmac_cnt; /* Max secondary UC MACs programmable */
|
||||
|
|
@ -583,4 +597,5 @@ extern void be_link_status_update(struct be_adapter *adapter, u8 link_status);
|
|||
extern void be_parse_stats(struct be_adapter *adapter);
|
||||
extern int be_load_fw(struct be_adapter *adapter, u8 *func);
|
||||
extern bool be_is_wol_supported(struct be_adapter *adapter);
|
||||
extern bool be_pause_supported(struct be_adapter *adapter);
|
||||
#endif /* BE_H */
|
||||
|
|
|
|||
|
|
@ -126,7 +126,7 @@ static void be_async_link_state_process(struct be_adapter *adapter,
|
|||
struct be_async_event_link_state *evt)
|
||||
{
|
||||
/* When link status changes, link speed must be re-queried from FW */
|
||||
adapter->link_speed = -1;
|
||||
adapter->phy.link_speed = -1;
|
||||
|
||||
/* For the initial link status do not rely on the ASYNC event as
|
||||
* it may not be received in some cases.
|
||||
|
|
@ -153,7 +153,7 @@ static void be_async_grp5_qos_speed_process(struct be_adapter *adapter,
|
|||
{
|
||||
if (evt->physical_port == adapter->port_num) {
|
||||
/* qos_link_speed is in units of 10 Mbps */
|
||||
adapter->link_speed = evt->qos_link_speed * 10;
|
||||
adapter->phy.link_speed = evt->qos_link_speed * 10;
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -2136,8 +2136,7 @@ err:
|
|||
return status;
|
||||
}
|
||||
|
||||
int be_cmd_get_phy_info(struct be_adapter *adapter,
|
||||
struct be_phy_info *phy_info)
|
||||
int be_cmd_get_phy_info(struct be_adapter *adapter)
|
||||
{
|
||||
struct be_mcc_wrb *wrb;
|
||||
struct be_cmd_req_get_phy_info *req;
|
||||
|
|
@ -2170,9 +2169,15 @@ int be_cmd_get_phy_info(struct be_adapter *adapter,
|
|||
if (!status) {
|
||||
struct be_phy_info *resp_phy_info =
|
||||
cmd.va + sizeof(struct be_cmd_req_hdr);
|
||||
phy_info->phy_type = le16_to_cpu(resp_phy_info->phy_type);
|
||||
phy_info->interface_type =
|
||||
adapter->phy.phy_type = le16_to_cpu(resp_phy_info->phy_type);
|
||||
adapter->phy.interface_type =
|
||||
le16_to_cpu(resp_phy_info->interface_type);
|
||||
adapter->phy.auto_speeds_supported =
|
||||
le16_to_cpu(resp_phy_info->auto_speeds_supported);
|
||||
adapter->phy.fixed_speeds_supported =
|
||||
le16_to_cpu(resp_phy_info->fixed_speeds_supported);
|
||||
adapter->phy.misc_params =
|
||||
le32_to_cpu(resp_phy_info->misc_params);
|
||||
}
|
||||
pci_free_consistent(adapter->pdev, cmd.size,
|
||||
cmd.va, cmd.dma);
|
||||
|
|
|
|||
|
|
@ -1309,9 +1309,36 @@ enum {
|
|||
PHY_TYPE_KX4_10GB,
|
||||
PHY_TYPE_BASET_10GB,
|
||||
PHY_TYPE_BASET_1GB,
|
||||
PHY_TYPE_BASEX_1GB,
|
||||
PHY_TYPE_SGMII,
|
||||
PHY_TYPE_DISABLED = 255
|
||||
};
|
||||
|
||||
#define BE_SUPPORTED_SPEED_NONE 0
|
||||
#define BE_SUPPORTED_SPEED_10MBPS 1
|
||||
#define BE_SUPPORTED_SPEED_100MBPS 2
|
||||
#define BE_SUPPORTED_SPEED_1GBPS 4
|
||||
#define BE_SUPPORTED_SPEED_10GBPS 8
|
||||
|
||||
#define BE_AN_EN 0x2
|
||||
#define BE_PAUSE_SYM_EN 0x80
|
||||
|
||||
/* MAC speed valid values */
|
||||
#define SPEED_DEFAULT 0x0
|
||||
#define SPEED_FORCED_10GB 0x1
|
||||
#define SPEED_FORCED_1GB 0x2
|
||||
#define SPEED_AUTONEG_10GB 0x3
|
||||
#define SPEED_AUTONEG_1GB 0x4
|
||||
#define SPEED_AUTONEG_100MB 0x5
|
||||
#define SPEED_AUTONEG_10GB_1GB 0x6
|
||||
#define SPEED_AUTONEG_10GB_1GB_100MB 0x7
|
||||
#define SPEED_AUTONEG_1GB_100MB 0x8
|
||||
#define SPEED_AUTONEG_10MB 0x9
|
||||
#define SPEED_AUTONEG_1GB_100MB_10MB 0xa
|
||||
#define SPEED_AUTONEG_100MB_10MB 0xb
|
||||
#define SPEED_FORCED_100MB 0xc
|
||||
#define SPEED_FORCED_10MB 0xd
|
||||
|
||||
struct be_cmd_req_get_phy_info {
|
||||
struct be_cmd_req_hdr hdr;
|
||||
u8 rsvd0[24];
|
||||
|
|
@ -1321,7 +1348,11 @@ struct be_phy_info {
|
|||
u16 phy_type;
|
||||
u16 interface_type;
|
||||
u32 misc_params;
|
||||
u32 future_use[4];
|
||||
u16 ext_phy_details;
|
||||
u16 rsvd;
|
||||
u16 auto_speeds_supported;
|
||||
u16 fixed_speeds_supported;
|
||||
u32 future_use[2];
|
||||
};
|
||||
|
||||
struct be_cmd_resp_get_phy_info {
|
||||
|
|
@ -1655,8 +1686,7 @@ extern int be_cmd_get_seeprom_data(struct be_adapter *adapter,
|
|||
struct be_dma_mem *nonemb_cmd);
|
||||
extern int be_cmd_set_loopback(struct be_adapter *adapter, u8 port_num,
|
||||
u8 loopback_type, u8 enable);
|
||||
extern int be_cmd_get_phy_info(struct be_adapter *adapter,
|
||||
struct be_phy_info *phy_info);
|
||||
extern int be_cmd_get_phy_info(struct be_adapter *adapter);
|
||||
extern int be_cmd_set_qos(struct be_adapter *adapter, u32 bps, u32 domain);
|
||||
extern void be_detect_dump_ue(struct be_adapter *adapter);
|
||||
extern int be_cmd_get_die_temperature(struct be_adapter *adapter);
|
||||
|
|
|
|||
|
|
@ -433,102 +433,193 @@ static int be_get_sset_count(struct net_device *netdev, int stringset)
|
|||
}
|
||||
}
|
||||
|
||||
static u32 be_get_port_type(u32 phy_type, u32 dac_cable_len)
|
||||
{
|
||||
u32 port;
|
||||
|
||||
switch (phy_type) {
|
||||
case PHY_TYPE_BASET_1GB:
|
||||
case PHY_TYPE_BASEX_1GB:
|
||||
case PHY_TYPE_SGMII:
|
||||
port = PORT_TP;
|
||||
break;
|
||||
case PHY_TYPE_SFP_PLUS_10GB:
|
||||
port = dac_cable_len ? PORT_DA : PORT_FIBRE;
|
||||
break;
|
||||
case PHY_TYPE_XFP_10GB:
|
||||
case PHY_TYPE_SFP_1GB:
|
||||
port = PORT_FIBRE;
|
||||
break;
|
||||
case PHY_TYPE_BASET_10GB:
|
||||
port = PORT_TP;
|
||||
break;
|
||||
default:
|
||||
port = PORT_OTHER;
|
||||
}
|
||||
|
||||
return port;
|
||||
}
|
||||
|
||||
static u32 convert_to_et_setting(u32 if_type, u32 if_speeds)
|
||||
{
|
||||
u32 val = 0;
|
||||
|
||||
switch (if_type) {
|
||||
case PHY_TYPE_BASET_1GB:
|
||||
case PHY_TYPE_BASEX_1GB:
|
||||
case PHY_TYPE_SGMII:
|
||||
val |= SUPPORTED_TP;
|
||||
if (if_speeds & BE_SUPPORTED_SPEED_1GBPS)
|
||||
val |= SUPPORTED_1000baseT_Full;
|
||||
if (if_speeds & BE_SUPPORTED_SPEED_100MBPS)
|
||||
val |= SUPPORTED_100baseT_Full;
|
||||
if (if_speeds & BE_SUPPORTED_SPEED_10MBPS)
|
||||
val |= SUPPORTED_10baseT_Full;
|
||||
break;
|
||||
case PHY_TYPE_KX4_10GB:
|
||||
val |= SUPPORTED_Backplane;
|
||||
if (if_speeds & BE_SUPPORTED_SPEED_1GBPS)
|
||||
val |= SUPPORTED_1000baseKX_Full;
|
||||
if (if_speeds & BE_SUPPORTED_SPEED_10GBPS)
|
||||
val |= SUPPORTED_10000baseKX4_Full;
|
||||
break;
|
||||
case PHY_TYPE_KR_10GB:
|
||||
val |= SUPPORTED_Backplane |
|
||||
SUPPORTED_10000baseKR_Full;
|
||||
break;
|
||||
case PHY_TYPE_SFP_PLUS_10GB:
|
||||
case PHY_TYPE_XFP_10GB:
|
||||
case PHY_TYPE_SFP_1GB:
|
||||
val |= SUPPORTED_FIBRE;
|
||||
if (if_speeds & BE_SUPPORTED_SPEED_10GBPS)
|
||||
val |= SUPPORTED_10000baseT_Full;
|
||||
if (if_speeds & BE_SUPPORTED_SPEED_1GBPS)
|
||||
val |= SUPPORTED_1000baseT_Full;
|
||||
break;
|
||||
case PHY_TYPE_BASET_10GB:
|
||||
val |= SUPPORTED_TP;
|
||||
if (if_speeds & BE_SUPPORTED_SPEED_10GBPS)
|
||||
val |= SUPPORTED_10000baseT_Full;
|
||||
if (if_speeds & BE_SUPPORTED_SPEED_1GBPS)
|
||||
val |= SUPPORTED_1000baseT_Full;
|
||||
if (if_speeds & BE_SUPPORTED_SPEED_100MBPS)
|
||||
val |= SUPPORTED_100baseT_Full;
|
||||
break;
|
||||
default:
|
||||
val |= SUPPORTED_TP;
|
||||
}
|
||||
|
||||
return val;
|
||||
}
|
||||
|
||||
static int convert_to_et_speed(u32 be_speed)
|
||||
{
|
||||
int et_speed = SPEED_10000;
|
||||
|
||||
switch (be_speed) {
|
||||
case PHY_LINK_SPEED_10MBPS:
|
||||
et_speed = SPEED_10;
|
||||
break;
|
||||
case PHY_LINK_SPEED_100MBPS:
|
||||
et_speed = SPEED_100;
|
||||
break;
|
||||
case PHY_LINK_SPEED_1GBPS:
|
||||
et_speed = SPEED_1000;
|
||||
break;
|
||||
case PHY_LINK_SPEED_10GBPS:
|
||||
et_speed = SPEED_10000;
|
||||
break;
|
||||
}
|
||||
|
||||
return et_speed;
|
||||
}
|
||||
|
||||
bool be_pause_supported(struct be_adapter *adapter)
|
||||
{
|
||||
return (adapter->phy.interface_type == PHY_TYPE_SFP_PLUS_10GB ||
|
||||
adapter->phy.interface_type == PHY_TYPE_XFP_10GB) ?
|
||||
false : true;
|
||||
}
|
||||
|
||||
static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
|
||||
{
|
||||
struct be_adapter *adapter = netdev_priv(netdev);
|
||||
struct be_phy_info phy_info;
|
||||
u8 mac_speed = 0;
|
||||
u8 port_speed = 0;
|
||||
u16 link_speed = 0;
|
||||
u8 link_status;
|
||||
u32 et_speed = 0;
|
||||
int status;
|
||||
|
||||
if ((adapter->link_speed < 0) || (!(netdev->flags & IFF_UP))) {
|
||||
status = be_cmd_link_status_query(adapter, &mac_speed,
|
||||
&link_speed, &link_status, 0);
|
||||
if (!status)
|
||||
be_link_status_update(adapter, link_status);
|
||||
|
||||
/* link_speed is in units of 10 Mbps */
|
||||
if (link_speed) {
|
||||
ethtool_cmd_speed_set(ecmd, link_speed*10);
|
||||
if (adapter->phy.link_speed < 0 || !(netdev->flags & IFF_UP)) {
|
||||
if (adapter->phy.forced_port_speed < 0) {
|
||||
status = be_cmd_link_status_query(adapter, &port_speed,
|
||||
&link_speed, &link_status, 0);
|
||||
if (!status)
|
||||
be_link_status_update(adapter, link_status);
|
||||
if (link_speed)
|
||||
et_speed = link_speed;
|
||||
else
|
||||
et_speed = convert_to_et_speed(port_speed);
|
||||
} else {
|
||||
switch (mac_speed) {
|
||||
case PHY_LINK_SPEED_10MBPS:
|
||||
ethtool_cmd_speed_set(ecmd, SPEED_10);
|
||||
break;
|
||||
case PHY_LINK_SPEED_100MBPS:
|
||||
ethtool_cmd_speed_set(ecmd, SPEED_100);
|
||||
break;
|
||||
case PHY_LINK_SPEED_1GBPS:
|
||||
ethtool_cmd_speed_set(ecmd, SPEED_1000);
|
||||
break;
|
||||
case PHY_LINK_SPEED_10GBPS:
|
||||
ethtool_cmd_speed_set(ecmd, SPEED_10000);
|
||||
break;
|
||||
case PHY_LINK_SPEED_ZERO:
|
||||
ethtool_cmd_speed_set(ecmd, 0);
|
||||
break;
|
||||
}
|
||||
et_speed = adapter->phy.forced_port_speed;
|
||||
}
|
||||
|
||||
status = be_cmd_get_phy_info(adapter, &phy_info);
|
||||
if (!status) {
|
||||
switch (phy_info.interface_type) {
|
||||
case PHY_TYPE_XFP_10GB:
|
||||
case PHY_TYPE_SFP_1GB:
|
||||
case PHY_TYPE_SFP_PLUS_10GB:
|
||||
ecmd->port = PORT_FIBRE;
|
||||
break;
|
||||
default:
|
||||
ecmd->port = PORT_TP;
|
||||
break;
|
||||
}
|
||||
ethtool_cmd_speed_set(ecmd, et_speed);
|
||||
|
||||
switch (phy_info.interface_type) {
|
||||
case PHY_TYPE_KR_10GB:
|
||||
case PHY_TYPE_KX4_10GB:
|
||||
ecmd->autoneg = AUTONEG_ENABLE;
|
||||
status = be_cmd_get_phy_info(adapter);
|
||||
if (status)
|
||||
return status;
|
||||
|
||||
ecmd->supported =
|
||||
convert_to_et_setting(adapter->phy.interface_type,
|
||||
adapter->phy.auto_speeds_supported |
|
||||
adapter->phy.fixed_speeds_supported);
|
||||
ecmd->advertising =
|
||||
convert_to_et_setting(adapter->phy.interface_type,
|
||||
adapter->phy.auto_speeds_supported);
|
||||
|
||||
ecmd->port = be_get_port_type(adapter->phy.interface_type,
|
||||
adapter->phy.dac_cable_len);
|
||||
|
||||
if (adapter->phy.auto_speeds_supported) {
|
||||
ecmd->supported |= SUPPORTED_Autoneg;
|
||||
ecmd->autoneg = AUTONEG_ENABLE;
|
||||
ecmd->advertising |= ADVERTISED_Autoneg;
|
||||
}
|
||||
|
||||
if (be_pause_supported(adapter)) {
|
||||
ecmd->supported |= SUPPORTED_Pause;
|
||||
ecmd->advertising |= ADVERTISED_Pause;
|
||||
}
|
||||
|
||||
switch (adapter->phy.interface_type) {
|
||||
case PHY_TYPE_KR_10GB:
|
||||
case PHY_TYPE_KX4_10GB:
|
||||
ecmd->transceiver = XCVR_INTERNAL;
|
||||
break;
|
||||
default:
|
||||
ecmd->autoneg = AUTONEG_DISABLE;
|
||||
ecmd->transceiver = XCVR_EXTERNAL;
|
||||
break;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
ecmd->transceiver = XCVR_EXTERNAL;
|
||||
break;
|
||||
}
|
||||
|
||||
/* Save for future use */
|
||||
adapter->link_speed = ethtool_cmd_speed(ecmd);
|
||||
adapter->port_type = ecmd->port;
|
||||
adapter->transceiver = ecmd->transceiver;
|
||||
adapter->autoneg = ecmd->autoneg;
|
||||
adapter->phy.link_speed = ethtool_cmd_speed(ecmd);
|
||||
adapter->phy.port_type = ecmd->port;
|
||||
adapter->phy.transceiver = ecmd->transceiver;
|
||||
adapter->phy.autoneg = ecmd->autoneg;
|
||||
adapter->phy.advertising = ecmd->advertising;
|
||||
adapter->phy.supported = ecmd->supported;
|
||||
} else {
|
||||
ethtool_cmd_speed_set(ecmd, adapter->link_speed);
|
||||
ecmd->port = adapter->port_type;
|
||||
ecmd->transceiver = adapter->transceiver;
|
||||
ecmd->autoneg = adapter->autoneg;
|
||||
ethtool_cmd_speed_set(ecmd, adapter->phy.link_speed);
|
||||
ecmd->port = adapter->phy.port_type;
|
||||
ecmd->transceiver = adapter->phy.transceiver;
|
||||
ecmd->autoneg = adapter->phy.autoneg;
|
||||
ecmd->advertising = adapter->phy.advertising;
|
||||
ecmd->supported = adapter->phy.supported;
|
||||
}
|
||||
|
||||
ecmd->duplex = DUPLEX_FULL;
|
||||
ecmd->phy_address = adapter->port_num;
|
||||
switch (ecmd->port) {
|
||||
case PORT_FIBRE:
|
||||
ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
|
||||
break;
|
||||
case PORT_TP:
|
||||
ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP);
|
||||
break;
|
||||
case PORT_AUI:
|
||||
ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_AUI);
|
||||
break;
|
||||
}
|
||||
|
||||
if (ecmd->autoneg) {
|
||||
ecmd->supported |= SUPPORTED_1000baseT_Full;
|
||||
ecmd->supported |= SUPPORTED_Autoneg;
|
||||
ecmd->advertising |= (ADVERTISED_10000baseT_Full |
|
||||
ADVERTISED_1000baseT_Full);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -548,7 +639,7 @@ be_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd)
|
|||
struct be_adapter *adapter = netdev_priv(netdev);
|
||||
|
||||
be_cmd_get_flow_control(adapter, &ecmd->tx_pause, &ecmd->rx_pause);
|
||||
ecmd->autoneg = 0;
|
||||
ecmd->autoneg = adapter->phy.fc_autoneg;
|
||||
}
|
||||
|
||||
static int
|
||||
|
|
|
|||
|
|
@ -2571,11 +2571,12 @@ err:
|
|||
static void be_setup_init(struct be_adapter *adapter)
|
||||
{
|
||||
adapter->vlan_prio_bmap = 0xff;
|
||||
adapter->link_speed = -1;
|
||||
adapter->phy.link_speed = -1;
|
||||
adapter->if_handle = -1;
|
||||
adapter->be3_native = false;
|
||||
adapter->promiscuous = false;
|
||||
adapter->eq_next_idx = 0;
|
||||
adapter->phy.forced_port_speed = -1;
|
||||
}
|
||||
|
||||
static int be_add_mac_from_list(struct be_adapter *adapter, u8 *mac)
|
||||
|
|
@ -2707,6 +2708,10 @@ static int be_setup(struct be_adapter *adapter)
|
|||
goto err;
|
||||
}
|
||||
|
||||
be_cmd_get_phy_info(adapter);
|
||||
if (be_pause_supported(adapter))
|
||||
adapter->phy.fc_autoneg = 1;
|
||||
|
||||
schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
|
||||
adapter->flags |= BE_FLAGS_WORKER_SCHEDULED;
|
||||
|
||||
|
|
@ -2760,17 +2765,8 @@ static bool be_flash_redboot(struct be_adapter *adapter,
|
|||
|
||||
static bool phy_flashing_required(struct be_adapter *adapter)
|
||||
{
|
||||
int status = 0;
|
||||
struct be_phy_info phy_info;
|
||||
|
||||
status = be_cmd_get_phy_info(adapter, &phy_info);
|
||||
if (status)
|
||||
return false;
|
||||
if ((phy_info.phy_type == TN_8022) &&
|
||||
(phy_info.interface_type == PHY_TYPE_BASET_10GB)) {
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
return (adapter->phy.phy_type == TN_8022 &&
|
||||
adapter->phy.interface_type == PHY_TYPE_BASET_10GB);
|
||||
}
|
||||
|
||||
static int be_flash_data(struct be_adapter *adapter,
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче