From 43497cc21889725a0fa0dcea1ce72ec567796f3a Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sat, 12 Nov 2011 01:12:22 +0000 Subject: [PATCH] ixgbe: DCB: IEEE transitions may fail to reprogram hardware. Transitioning through an IEEE DCBX version from a CEE DCBX and back (CEE->IEEE->CEE) may leave IEEE attributes programmed in the hardware. DCB uses a bit field in the set routines to determine which attributes PG, PFC, APP need to be reprogrammed. This is needed because user flow allows queueing a series of changes and then reprogramming the hardware with the entire set in one operation. When transitioning from IEEE DCBX mode back into CEE DCBX mode the PG and PFC bits need to be set so the possibly different CEE attributes get programmed into the device. This patch fixes broken logic that was evaluating to 0 and never setting any bits. Further this removes some checks for num_tc in set routines. This logic only worked when the number of traffic classes and user priorities were equal. This is no longer the case for X540 devices. Besides we can trust user input in this case if the device is incorrectly configured the DCB bandwidths will be incorrectly mapped but no OOPs, BUG, or hardware failure will occur. Signed-off-by: John Fastabend Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- .../net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c | 21 +++++++++---------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c index 8c056c06761f..da31735311f1 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c @@ -158,10 +158,6 @@ static void ixgbe_dcbnl_set_pg_tc_cfg_tx(struct net_device *netdev, int tc, { struct ixgbe_adapter *adapter = netdev_priv(netdev); - /* Abort a bad configuration */ - if (ffs(up_map) > adapter->dcb_cfg.num_tcs.pg_tcs) - return; - if (prio != DCB_ATTR_VALUE_UNDEFINED) adapter->temp_dcb_cfg.tc_config[tc].path[0].prio_type = prio; if (bwg_id != DCB_ATTR_VALUE_UNDEFINED) @@ -185,7 +181,7 @@ static void ixgbe_dcbnl_set_pg_tc_cfg_tx(struct net_device *netdev, int tc, if (adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap != adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap) - adapter->dcb_set_bitmap |= BIT_PFC; + adapter->dcb_set_bitmap |= BIT_PFC | BIT_APP_UPCHG; } static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id, @@ -206,10 +202,6 @@ static void ixgbe_dcbnl_set_pg_tc_cfg_rx(struct net_device *netdev, int tc, { struct ixgbe_adapter *adapter = netdev_priv(netdev); - /* Abort bad configurations */ - if (ffs(up_map) > adapter->dcb_cfg.num_tcs.pg_tcs) - return; - if (prio != DCB_ATTR_VALUE_UNDEFINED) adapter->temp_dcb_cfg.tc_config[tc].path[1].prio_type = prio; if (bwg_id != DCB_ATTR_VALUE_UNDEFINED) @@ -434,7 +426,12 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) adapter->hw.fc.current_mode = ixgbe_fc_pfc; #ifdef IXGBE_FCOE - if (up && !(up & (1 << adapter->fcoe.up))) { + /* Reprogam FCoE hardware offloads when the traffic class + * FCoE is using changes. This happens if the APP info + * changes or the up2tc mapping is updated. + */ + if ((up && !(up & (1 << adapter->fcoe.up))) || + (adapter->dcb_set_bitmap & BIT_APP_UPCHG)) { adapter->fcoe.up = ffs(up) - 1; ixgbe_dcbnl_devreset(netdev); ret = DCB_HW_CHG_RST; @@ -742,7 +739,9 @@ static u8 ixgbe_dcbnl_setdcbx(struct net_device *dev, u8 mode) ixgbe_dcbnl_ieee_setets(dev, &ets); ixgbe_dcbnl_ieee_setpfc(dev, &pfc); } else if (mode & DCB_CAP_DCBX_VER_CEE) { - adapter->dcb_set_bitmap |= (BIT_PFC & BIT_PG_TX & BIT_PG_RX); + u8 mask = BIT_PFC | BIT_PG_TX | BIT_PG_RX | BIT_APP_UPCHG; + + adapter->dcb_set_bitmap |= mask; ixgbe_dcbnl_set_all(dev); } else { /* Drop into single TC mode strict priority as this