media: i2c: ov9282: Add support for 8bit readout
The sensor supports 8 or 10 bit readout modes, but the driver only supported 10 bit. Add 8 bit readout. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This commit is contained in:
Dave Stevenson
Mauro Carvalho Chehab
Родитель
c84f43a842
Коммит
43ac0cac18
|
|
@ -21,6 +21,10 @@
|
|||
#define OV9282_MODE_STANDBY 0x00
|
||||
#define OV9282_MODE_STREAMING 0x01
|
||||
|
||||
#define OV9282_REG_PLL_CTRL_0D 0x030d
|
||||
#define OV9282_PLL_CTRL_0D_RAW8 0x60
|
||||
#define OV9282_PLL_CTRL_0D_RAW10 0x50
|
||||
|
||||
#define OV9282_REG_TIMING_HTS 0x380c
|
||||
#define OV9282_TIMING_HTS_MAX 0x7fff
|
||||
|
||||
|
|
@ -48,6 +52,10 @@
|
|||
/* Group hold register */
|
||||
#define OV9282_REG_HOLD 0x3308
|
||||
|
||||
#define OV9282_REG_ANA_CORE_2 0x3662
|
||||
#define OV9282_ANA_CORE2_RAW8 0x07
|
||||
#define OV9282_ANA_CORE2_RAW10 0x05
|
||||
|
||||
#define OV9282_REG_TIMING_FORMAT_1 0x3820
|
||||
#define OV9282_REG_TIMING_FORMAT_2 0x3821
|
||||
#define OV9282_FLIP_BIT BIT(2)
|
||||
|
|
@ -63,8 +71,10 @@
|
|||
#define OV9282_NUM_DATA_LANES 2
|
||||
|
||||
/* Pixel rate */
|
||||
#define OV9282_PIXEL_RATE (OV9282_LINK_FREQ * 2 * \
|
||||
OV9282_NUM_DATA_LANES / 10)
|
||||
#define OV9282_PIXEL_RATE_10BIT (OV9282_LINK_FREQ * 2 * \
|
||||
OV9282_NUM_DATA_LANES / 10)
|
||||
#define OV9282_PIXEL_RATE_8BIT (OV9282_LINK_FREQ * 2 * \
|
||||
OV9282_NUM_DATA_LANES / 8)
|
||||
|
||||
/*
|
||||
* OV9282 native and active pixel array size.
|
||||
|
|
@ -140,6 +150,7 @@ struct ov9282_mode {
|
|||
* @again_ctrl: Pointer to analog gain control
|
||||
* @vblank: Vertical blanking in lines
|
||||
* @cur_mode: Pointer to current selected sensor mode
|
||||
* @code: Mbus code currently selected
|
||||
* @mutex: Mutex for serializing sensor controls
|
||||
* @streaming: Flag indicating streaming state
|
||||
*/
|
||||
|
|
@ -158,9 +169,11 @@ struct ov9282 {
|
|||
struct v4l2_ctrl *exp_ctrl;
|
||||
struct v4l2_ctrl *again_ctrl;
|
||||
};
|
||||
struct v4l2_ctrl *pixel_rate;
|
||||
u32 vblank;
|
||||
bool noncontinuous_clock;
|
||||
const struct ov9282_mode *cur_mode;
|
||||
u32 code;
|
||||
struct mutex mutex;
|
||||
bool streaming;
|
||||
};
|
||||
|
|
@ -178,7 +191,6 @@ static const s64 link_freq[] = {
|
|||
*/
|
||||
static const struct ov9282_reg common_regs[] = {
|
||||
{0x0302, 0x32},
|
||||
{0x030d, 0x50},
|
||||
{0x030e, 0x02},
|
||||
{0x3001, 0x00},
|
||||
{0x3004, 0x00},
|
||||
|
|
@ -516,19 +528,29 @@ static int ov9282_write_regs(struct ov9282 *ov9282,
|
|||
* ov9282_update_controls() - Update control ranges based on streaming mode
|
||||
* @ov9282: pointer to ov9282 device
|
||||
* @mode: pointer to ov9282_mode sensor mode
|
||||
* @fmt: pointer to the requested mode
|
||||
*
|
||||
* Return: 0 if successful, error code otherwise.
|
||||
*/
|
||||
static int ov9282_update_controls(struct ov9282 *ov9282,
|
||||
const struct ov9282_mode *mode)
|
||||
const struct ov9282_mode *mode,
|
||||
const struct v4l2_subdev_format *fmt)
|
||||
{
|
||||
u32 hblank_min;
|
||||
s64 pixel_rate;
|
||||
int ret;
|
||||
|
||||
ret = __v4l2_ctrl_s_ctrl(ov9282->link_freq_ctrl, mode->link_freq_idx);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
pixel_rate = (fmt->format.code == MEDIA_BUS_FMT_Y10_1X10) ?
|
||||
OV9282_PIXEL_RATE_10BIT : OV9282_PIXEL_RATE_8BIT;
|
||||
ret = __v4l2_ctrl_modify_range(ov9282->pixel_rate, pixel_rate,
|
||||
pixel_rate, 1, pixel_rate);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
hblank_min = mode->hblank_min[ov9282->noncontinuous_clock ? 0 : 1];
|
||||
ret = __v4l2_ctrl_modify_range(ov9282->hblank_ctrl, hblank_min,
|
||||
OV9282_TIMING_HTS_MAX - mode->width, 1,
|
||||
|
|
@ -698,10 +720,16 @@ static int ov9282_enum_mbus_code(struct v4l2_subdev *sd,
|
|||
struct v4l2_subdev_state *sd_state,
|
||||
struct v4l2_subdev_mbus_code_enum *code)
|
||||
{
|
||||
if (code->index > 0)
|
||||
switch (code->index) {
|
||||
case 0:
|
||||
code->code = MEDIA_BUS_FMT_Y10_1X10;
|
||||
break;
|
||||
case 1:
|
||||
code->code = MEDIA_BUS_FMT_Y8_1X8;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
|
||||
code->code = MEDIA_BUS_FMT_Y10_1X10;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -721,7 +749,8 @@ static int ov9282_enum_frame_size(struct v4l2_subdev *sd,
|
|||
if (fsize->index >= ARRAY_SIZE(supported_modes))
|
||||
return -EINVAL;
|
||||
|
||||
if (fsize->code != MEDIA_BUS_FMT_Y10_1X10)
|
||||
if (fsize->code != MEDIA_BUS_FMT_Y10_1X10 &&
|
||||
fsize->code != MEDIA_BUS_FMT_Y8_1X8)
|
||||
return -EINVAL;
|
||||
|
||||
fsize->min_width = supported_modes[fsize->index].width;
|
||||
|
|
@ -737,15 +766,17 @@ static int ov9282_enum_frame_size(struct v4l2_subdev *sd,
|
|||
* from selected sensor mode
|
||||
* @ov9282: pointer to ov9282 device
|
||||
* @mode: pointer to ov9282_mode sensor mode
|
||||
* @code: mbus code to be stored
|
||||
* @fmt: V4L2 sub-device format need to be filled
|
||||
*/
|
||||
static void ov9282_fill_pad_format(struct ov9282 *ov9282,
|
||||
const struct ov9282_mode *mode,
|
||||
u32 code,
|
||||
struct v4l2_subdev_format *fmt)
|
||||
{
|
||||
fmt->format.width = mode->width;
|
||||
fmt->format.height = mode->height;
|
||||
fmt->format.code = MEDIA_BUS_FMT_Y10_1X10;
|
||||
fmt->format.code = code;
|
||||
fmt->format.field = V4L2_FIELD_NONE;
|
||||
fmt->format.colorspace = V4L2_COLORSPACE_RAW;
|
||||
fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT;
|
||||
|
|
@ -775,7 +806,8 @@ static int ov9282_get_pad_format(struct v4l2_subdev *sd,
|
|||
framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
|
||||
fmt->format = *framefmt;
|
||||
} else {
|
||||
ov9282_fill_pad_format(ov9282, ov9282->cur_mode, fmt);
|
||||
ov9282_fill_pad_format(ov9282, ov9282->cur_mode, ov9282->code,
|
||||
fmt);
|
||||
}
|
||||
|
||||
mutex_unlock(&ov9282->mutex);
|
||||
|
|
@ -797,6 +829,7 @@ static int ov9282_set_pad_format(struct v4l2_subdev *sd,
|
|||
{
|
||||
struct ov9282 *ov9282 = to_ov9282(sd);
|
||||
const struct ov9282_mode *mode;
|
||||
u32 code;
|
||||
int ret = 0;
|
||||
|
||||
mutex_lock(&ov9282->mutex);
|
||||
|
|
@ -806,7 +839,12 @@ static int ov9282_set_pad_format(struct v4l2_subdev *sd,
|
|||
width, height,
|
||||
fmt->format.width,
|
||||
fmt->format.height);
|
||||
ov9282_fill_pad_format(ov9282, mode, fmt);
|
||||
if (fmt->format.code == MEDIA_BUS_FMT_Y8_1X8)
|
||||
code = MEDIA_BUS_FMT_Y8_1X8;
|
||||
else
|
||||
code = MEDIA_BUS_FMT_Y10_1X10;
|
||||
|
||||
ov9282_fill_pad_format(ov9282, mode, code, fmt);
|
||||
|
||||
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
||||
struct v4l2_mbus_framefmt *framefmt;
|
||||
|
|
@ -814,9 +852,11 @@ static int ov9282_set_pad_format(struct v4l2_subdev *sd,
|
|||
framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
|
||||
*framefmt = fmt->format;
|
||||
} else {
|
||||
ret = ov9282_update_controls(ov9282, mode);
|
||||
if (!ret)
|
||||
ret = ov9282_update_controls(ov9282, mode, fmt);
|
||||
if (!ret) {
|
||||
ov9282->cur_mode = mode;
|
||||
ov9282->code = code;
|
||||
}
|
||||
}
|
||||
|
||||
mutex_unlock(&ov9282->mutex);
|
||||
|
|
@ -838,7 +878,8 @@ static int ov9282_init_pad_cfg(struct v4l2_subdev *sd,
|
|||
struct v4l2_subdev_format fmt = { 0 };
|
||||
|
||||
fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
|
||||
ov9282_fill_pad_format(ov9282, &supported_modes[DEFAULT_MODE], &fmt);
|
||||
ov9282_fill_pad_format(ov9282, &supported_modes[DEFAULT_MODE],
|
||||
ov9282->code, &fmt);
|
||||
|
||||
return ov9282_set_pad_format(sd, sd_state, &fmt);
|
||||
}
|
||||
|
|
@ -903,7 +944,17 @@ static int ov9282_get_selection(struct v4l2_subdev *sd,
|
|||
*/
|
||||
static int ov9282_start_streaming(struct ov9282 *ov9282)
|
||||
{
|
||||
const struct ov9282_reg bitdepth_regs[2][2] = {
|
||||
{
|
||||
{OV9282_REG_PLL_CTRL_0D, OV9282_PLL_CTRL_0D_RAW10},
|
||||
{OV9282_REG_ANA_CORE_2, OV9282_ANA_CORE2_RAW10},
|
||||
}, {
|
||||
{OV9282_REG_PLL_CTRL_0D, OV9282_PLL_CTRL_0D_RAW8},
|
||||
{OV9282_REG_ANA_CORE_2, OV9282_ANA_CORE2_RAW8},
|
||||
}
|
||||
};
|
||||
const struct ov9282_reg_list *reg_list;
|
||||
int bitdepth_index;
|
||||
int ret;
|
||||
|
||||
/* Write common registers */
|
||||
|
|
@ -914,6 +965,13 @@ static int ov9282_start_streaming(struct ov9282 *ov9282)
|
|||
return ret;
|
||||
}
|
||||
|
||||
bitdepth_index = ov9282->code == MEDIA_BUS_FMT_Y10_1X10 ? 0 : 1;
|
||||
ret = ov9282_write_regs(ov9282, bitdepth_regs[bitdepth_index], 2);
|
||||
if (ret) {
|
||||
dev_err(ov9282->dev, "fail to write bitdepth regs");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Write sensor mode registers */
|
||||
reg_list = &ov9282->cur_mode->reg_list;
|
||||
ret = ov9282_write_regs(ov9282, reg_list->regs, reg_list->num_of_regs);
|
||||
|
|
@ -1235,9 +1293,11 @@ static int ov9282_init_controls(struct ov9282 *ov9282)
|
|||
0, 1, 1, 1);
|
||||
|
||||
/* Read only controls */
|
||||
v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_PIXEL_RATE,
|
||||
OV9282_PIXEL_RATE, OV9282_PIXEL_RATE, 1,
|
||||
OV9282_PIXEL_RATE);
|
||||
ov9282->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops,
|
||||
V4L2_CID_PIXEL_RATE,
|
||||
OV9282_PIXEL_RATE_10BIT,
|
||||
OV9282_PIXEL_RATE_10BIT, 1,
|
||||
OV9282_PIXEL_RATE_10BIT);
|
||||
|
||||
ov9282->link_freq_ctrl = v4l2_ctrl_new_int_menu(ctrl_hdlr,
|
||||
&ov9282_ctrl_ops,
|
||||
|
|
@ -1319,6 +1379,7 @@ static int ov9282_probe(struct i2c_client *client)
|
|||
|
||||
/* Set default mode to first mode */
|
||||
ov9282->cur_mode = &supported_modes[DEFAULT_MODE];
|
||||
ov9282->code = MEDIA_BUS_FMT_Y10_1X10;
|
||||
ov9282->vblank = ov9282->cur_mode->vblank;
|
||||
|
||||
ret = ov9282_init_controls(ov9282);
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче