staging: mt7621-dts: update ethernet settings.

The ethernet in mt7621 is now supported by
 drivers/net/ethernet/mediatek/

which provides support for the integrated switch through DSA.

This requires some devicetree changes, and particularly allows
a board dts to identify which switch ports are present.

The second CPU interface - gmac1 - doesn't work yet, so the device
tree information may not be correct.  The phy (which is present on the
gnubee-pc2) can negotiate and report connection speed etc, but no
traffic flows.

The gnubee-pc1 has two network ports which are 'black' and 'blue'.
There are connected to switch ports 0 and 4 respectively.

Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/mt7621-dts/gbpc1.dts

@@ -117,22 +117,6 @@
 	status = "okay";
 };
 
-&ethernet {
-	//mtd-mac-address = <&factory 0xe000>;
-	gmac1: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-handle = <&phy1>;
-	};
-
-	mdio-bus {
-		phy1: ethernet-phy@1 {
-			reg = <1>;
-			phy-mode = "rgmii";
-		};
-	};
-};
-
 &pinctrl {
 	state_default: pinctrl0 {
 		gpio {
@@ -141,3 +125,16 @@
 		};
 	};
 };
+
+&switch0 {
+	ports {
+		port@0 {
+			label = "ethblack";
+			status = "ok";
+		};
+		port@4 {
+			label = "ethblue";
+			status = "ok";
+		};
+	};
+};

drivers/staging/mt7621-dts/mt7621.dtsi

@@ -372,16 +372,83 @@
 
 		mediatek,ethsys = <&ethsys>;
 
-		mediatek,switch = <&gsw>;
 
+		gmac0: mac@0 {
+			compatible = "mediatek,eth-mac";
+			reg = <0>;
+			phy-mode = "rgmii";
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
+		};
+		gmac1: mac@1 {
+			compatible = "mediatek,eth-mac";
+			reg = <1>;
+			status = "off";
+			phy-mode = "rgmii";
+			phy-handle = <&phy5>;
+		};
 		mdio-bus {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			phy1f: ethernet-phy@1f {
-				reg = <0x1f>;
+			phy5: ethernet-phy@5 {
+				reg = <5>;
 				phy-mode = "rgmii";
 			};
+
+			switch0: switch0@0 {
+				compatible = "mediatek,mt7621";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+				mediatek,mcm;
+				resets = <&rstctrl 2>;
+				reset-names = "mcm";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+					port@0 {
+						status = "off";
+						reg = <0>;
+						label = "lan0";
+					};
+					port@1 {
+						status = "off";
+						reg = <1>;
+						label = "lan1";
+					};
+					port@2 {
+						status = "off";
+						reg = <2>;
+						label = "lan2";
+					};
+					port@3 {
+						status = "off";
+						reg = <3>;
+						label = "lan3";
+					};
+					port@4 {
+						status = "off";
+						reg = <4>;
+						label = "lan4";
+					};
+					port@6 {
+						reg = <6>;
+						label = "cpu";
+						ethernet = <&gmac0>;
+						phy-mode = "trgmii";
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
 		};
 	};