microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

fbdev: sh_mobile_lcdcfb: Support multiple video modes in platform data 

This is a preparation for HDMI hotplug support. This patch just moves all
platform defined video modes for the sh_mobile_lcdcfb driver to separate
arrays and switches all users to use element 0 of that array, so, this patch
doesn't introduce any functional changes and as such should not cause any
regressions.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Guennadi Liakhovetski 2010-09-03 07:20:04 +00:00 коммит произвёл Paul Mundt
Родитель 01ac25b59f
Коммит 44432407d9
10 изменённых файлов: 219 добавлений и 157 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

98
arch/arm/mach-shmobile/board-ap4evb.c
Просмотреть файл

@ -375,10 +375,40 @@ static struct platform_device usb1_host_device = {
.resource = usb1_host_resources,
};
const static struct fb_videomode ap4evb_lcdc_modes[] = {
{
#ifdef CONFIG_AP4EVB_QHD
.name = "R63302(QHD)",
.xres = 544,
.yres = 961,
.left_margin = 72,
.right_margin = 600,
.hsync_len = 16,
.upper_margin = 8,
.lower_margin = 8,
.vsync_len = 2,
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
#else
.name = "WVGA Panel",
.xres = 800,
.yres = 480,
.left_margin = 220,
.right_margin = 110,
.hsync_len = 70,
.upper_margin = 20,
.lower_margin = 5,
.vsync_len = 5,
.sync = 0,
#endif
},
};
static struct sh_mobile_lcdc_info lcdc_info = {
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
.lcd_cfg = ap4evb_lcdc_modes,
.num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes),
}
};
@ -569,6 +599,31 @@ static struct platform_device fsi_device = {
},
};
const static struct fb_videomode ap4evb_hdmi_modes[] = {
{
.name = "HDMI 720p",
.xres = 1280,
.yres = 720,
/*
* If left and right margins are not multiples of 8,
* LDHAJR will be adjusted accordingly by the LCDC
* driver. Until we start using EDID, these values
* might have to be adjusted for different monitors.
*/
.left_margin = 200,
.right_margin = 88,
.hsync_len = 48,
.upper_margin = 20,
.lower_margin = 5,
.vsync_len = 5,
.pixclock = 13468,
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
},
};
static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = {
.clock_source = LCDC_CLK_EXTERNAL,
.ch[0] = {
@ -577,26 +632,8 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = {
.interface_type = RGB24,
.clock_divider = 1,
.flags = LCDC_FLAGS_DWPOL,
.lcd_cfg = {
.name = "HDMI",
/* So far only 720p is supported */
.xres = 1280,
.yres = 720,
/*
* If left and right margins are not multiples of 8,
* LDHAJR will be adjusted accordingly by the LCDC
* driver. Until we start using EDID, these values
* might have to be adjusted for different monitors.
*/
.left_margin = 200,
.right_margin = 88,
.hsync_len = 48,
.upper_margin = 20,
.lower_margin = 5,
.vsync_len = 5,
.pixclock = 13468,
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
},
.lcd_cfg = ap4evb_hdmi_modes,
.num_cfg = ARRAY_SIZE(ap4evb_hdmi_modes),
}
};
@ -960,17 +997,6 @@ static void __init ap4evb_init(void)
lcdc_info.ch[0].interface_type = RGB24;
lcdc_info.ch[0].clock_divider = 1;
lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL;
lcdc_info.ch[0].lcd_cfg.name = "R63302(QHD)";
lcdc_info.ch[0].lcd_cfg.xres = 544;
lcdc_info.ch[0].lcd_cfg.yres = 961;
lcdc_info.ch[0].lcd_cfg.left_margin = 72;
lcdc_info.ch[0].lcd_cfg.right_margin = 600;
lcdc_info.ch[0].lcd_cfg.hsync_len = 16;
lcdc_info.ch[0].lcd_cfg.upper_margin = 8;
lcdc_info.ch[0].lcd_cfg.lower_margin = 8;
lcdc_info.ch[0].lcd_cfg.vsync_len = 2;
lcdc_info.ch[0].lcd_cfg.sync = FB_SYNC_VERT_HIGH_ACT |
FB_SYNC_HOR_HIGH_ACT;
lcdc_info.ch[0].lcd_size_cfg.width = 44;
lcdc_info.ch[0].lcd_size_cfg.height = 79;
@ -1013,16 +1039,6 @@ static void __init ap4evb_init(void)
lcdc_info.ch[0].interface_type = RGB18;
lcdc_info.ch[0].clock_divider = 2;
lcdc_info.ch[0].flags = 0;
lcdc_info.ch[0].lcd_cfg.name = "WVGA Panel";
lcdc_info.ch[0].lcd_cfg.xres = 800;
lcdc_info.ch[0].lcd_cfg.yres = 480;
lcdc_info.ch[0].lcd_cfg.left_margin = 220;
lcdc_info.ch[0].lcd_cfg.right_margin = 110;
lcdc_info.ch[0].lcd_cfg.hsync_len = 70;
lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
lcdc_info.ch[0].lcd_cfg.sync = 0;
lcdc_info.ch[0].lcd_size_cfg.width = 152;
lcdc_info.ch[0].lcd_size_cfg.height = 91;

29
arch/sh/boards/mach-ap325rxa/setup.c
Просмотреть файл

@ -176,6 +176,21 @@ static void ap320_wvga_power_off(void *board_data)
__raw_writew(0, FPGA_LCDREG);
}
const static struct fb_videomode ap325rxa_lcdc_modes[] = {
{
.name = "LB070WV1",
.xres = 800,
.yres = 480,
.left_margin = 32,
.right_margin = 160,
.hsync_len = 8,
.upper_margin = 63,
.lower_margin = 80,
.vsync_len = 1,
.sync = 0, /* hsync and vsync are active low */
},
};
static struct sh_mobile_lcdc_info lcdc_info = {
.clock_source = LCDC_CLK_EXTERNAL,
.ch[0] = {
@ -183,18 +198,8 @@ static struct sh_mobile_lcdc_info lcdc_info = {
.bpp = 16,
.interface_type = RGB18,
.clock_divider = 1,
.lcd_cfg = {
.name = "LB070WV1",
.xres = 800,
.yres = 480,
.left_margin = 32,
.right_margin = 160,
.hsync_len = 8,
.upper_margin = 63,
.lower_margin = 80,
.vsync_len = 1,
.sync = 0, /* hsync and vsync are active low */
},
.lcd_cfg = ap325rxa_lcdc_modes,
.num_cfg = ARRAY_SIZE(ap325rxa_lcdc_modes),
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,

60
arch/sh/boards/mach-ecovec24/setup.c
Просмотреть файл

@ -231,14 +231,41 @@ static struct platform_device usb1_common_device = {
};
/* LCDC */
const static struct fb_videomode ecovec_lcd_modes[] = {
{
.name = "Panel",
.xres = 800,
.yres = 480,
.left_margin = 220,
.right_margin = 110,
.hsync_len = 70,
.upper_margin = 20,
.lower_margin = 5,
.vsync_len = 5,
.sync = 0, /* hsync and vsync are active low */
},
};
const static struct fb_videomode ecovec_dvi_modes[] = {
{
.name = "DVI",
.xres = 1280,
.yres = 720,
.left_margin = 220,
.right_margin = 110,
.hsync_len = 40,
.upper_margin = 20,
.lower_margin = 5,
.vsync_len = 5,
.sync = 0, /* hsync and vsync are active low */
},
};
static struct sh_mobile_lcdc_info lcdc_info = {
.ch[0] = {
.interface_type = RGB18,
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
.lcd_cfg = {
.sync = 0, /* hsync and vsync are active low */
},
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
@ -1079,33 +1106,18 @@ static int __init arch_setup(void)
if (gpio_get_value(GPIO_PTE6)) {
/* DVI */
lcdc_info.clock_source = LCDC_CLK_EXTERNAL;
lcdc_info.ch[0].clock_divider = 1,
lcdc_info.ch[0].lcd_cfg.name = "DVI";
lcdc_info.ch[0].lcd_cfg.xres = 1280;
lcdc_info.ch[0].lcd_cfg.yres = 720;
lcdc_info.ch[0].lcd_cfg.left_margin = 220;
lcdc_info.ch[0].lcd_cfg.right_margin = 110;
lcdc_info.ch[0].lcd_cfg.hsync_len = 40;
lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
lcdc_info.ch[0].clock_divider = 1;
lcdc_info.ch[0].lcd_cfg = ecovec_dvi_modes;
lcdc_info.ch[0].num_cfg = ARRAY_SIZE(ecovec_dvi_modes);
gpio_set_value(GPIO_PTA2, 1);
gpio_set_value(GPIO_PTU1, 1);
} else {
/* Panel */
lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
lcdc_info.ch[0].clock_divider = 2,
lcdc_info.ch[0].lcd_cfg.name = "Panel";
lcdc_info.ch[0].lcd_cfg.xres = 800;
lcdc_info.ch[0].lcd_cfg.yres = 480;
lcdc_info.ch[0].lcd_cfg.left_margin = 220;
lcdc_info.ch[0].lcd_cfg.right_margin = 110;
lcdc_info.ch[0].lcd_cfg.hsync_len = 70;
lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
lcdc_info.ch[0].clock_divider = 2;
lcdc_info.ch[0].lcd_cfg = ecovec_lcd_modes;
lcdc_info.ch[0].num_cfg = ARRAY_SIZE(ecovec_lcd_modes);
gpio_set_value(GPIO_PTR1, 1);

29
arch/sh/boards/mach-kfr2r09/setup.c
Просмотреть файл

@ -126,6 +126,21 @@ static struct platform_device kfr2r09_sh_keysc_device = {
},
};
const static struct fb_videomode kfr2r09_lcdc_modes[] = {
{
.name = "TX07D34VM0AAA",
.xres = 240,
.yres = 400,
.left_margin = 0,
.right_margin = 16,
.hsync_len = 8,
.upper_margin = 0,
.lower_margin = 1,
.vsync_len = 1,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
.clock_source = LCDC_CLK_BUS,
.ch[0] = {
@ -134,18 +149,8 @@ static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
.interface_type = SYS18,
.clock_divider = 6,
.flags = LCDC_FLAGS_DWPOL,
.lcd_cfg = {
.name = "TX07D34VM0AAA",
.xres = 240,
.yres = 400,
.left_margin = 0,
.right_margin = 16,
.hsync_len = 8,
.upper_margin = 0,
.lower_margin = 1,
.vsync_len = 1,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
.lcd_cfg = kfr2r09_lcdc_modes,
.num_cfg = ARRAY_SIZE(kfr2r09_lcdc_modes),
.lcd_size_cfg = {
.width = 35,
.height = 58,

58
arch/sh/boards/mach-migor/setup.c
Просмотреть файл

@ -213,51 +213,55 @@ static struct platform_device migor_nand_flash_device = {
}
};
const static struct fb_videomode migor_lcd_modes[] = {
{
#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
.name = "LB070WV1",
.xres = 800,
.yres = 480,
.left_margin = 64,
.right_margin = 16,
.hsync_len = 120,
.sync = 0,
#elif defined(CONFIG_SH_MIGOR_QVGA)
.name = "PH240320T",
.xres = 320,
.yres = 240,
.left_margin = 0,
.right_margin = 16,
.hsync_len = 8,
.sync = FB_SYNC_HOR_HIGH_ACT,
#endif
.upper_margin = 1,
.lower_margin = 17,
.vsync_len = 2,
},
};
static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
#ifdef CONFIG_SH_MIGOR_RTA_WVGA
#if defined(CONFIG_SH_MIGOR_RTA_WVGA)
.clock_source = LCDC_CLK_BUS,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
.interface_type = RGB16,
.clock_divider = 2,
.lcd_cfg = {
.name = "LB070WV1",
.xres = 800,
.yres = 480,
.left_margin = 64,
.right_margin = 16,
.hsync_len = 120,
.upper_margin = 1,
.lower_margin = 17,
.vsync_len = 2,
.sync = 0,
},
.lcd_cfg = migor_lcd_modes,
.num_cfg = ARRAY_SIZE(migor_lcd_modes),
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
},
}
#endif
#ifdef CONFIG_SH_MIGOR_QVGA
#elif defined(CONFIG_SH_MIGOR_QVGA)
.clock_source = LCDC_CLK_PERIPHERAL,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
.interface_type = SYS16A,
.clock_divider = 10,
.lcd_cfg = {
.name = "PH240320T",
.xres = 320,
.yres = 240,
.left_margin = 0,
.right_margin = 16,
.hsync_len = 8,
.upper_margin = 1,
.lower_margin = 17,
.vsync_len = 2,
.sync = FB_SYNC_HOR_HIGH_ACT,
},
.lcd_cfg = migor_lcd_modes,
.num_cfg = ARRAY_SIZE(migor_lcd_modes),
.lcd_size_cfg = { /* 2.4 inch */
.width = 49,
.height = 37,

54
arch/sh/boards/mach-se/7724/setup.c
Просмотреть файл

@ -144,16 +144,42 @@ static struct platform_device nor_flash_device = {
};
/* LCDC */
const static struct fb_videomode lcdc_720p_modes[] = {
{
.name = "LB070WV1",
.sync = 0, /* hsync and vsync are active low */
.xres = 1280;
.yres = 720;
.left_margin = 220;
.right_margin = 110;
.hsync_len = 40;
.upper_margin = 20;
.lower_margin = 5;
.vsync_len = 5;
},
};
const static struct fb_videomode lcdc_vga_modes[] = {
{
.name = "LB070WV1",
.sync = 0, /* hsync and vsync are active low */
.xres = 640;
.yres = 480;
.left_margin = 105;
.right_margin = 50;
.hsync_len = 96;
.upper_margin = 33;
.lower_margin = 10;
.vsync_len = 2;
},
};
static struct sh_mobile_lcdc_info lcdc_info = {
.clock_source = LCDC_CLK_EXTERNAL,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.bpp = 16,
.clock_divider = 1,
.lcd_cfg = {
.name = "LB070WV1",
.sync = 0, /* hsync and vsync are active low */
},
.lcd_size_cfg = { /* 7.0 inch */
.width = 152,
.height = 91,
@ -909,24 +935,12 @@ static int __init devices_setup(void)
if (sw & SW41_B) {
/* 720p */
lcdc_info.ch[0].lcd_cfg.xres = 1280;
lcdc_info.ch[0].lcd_cfg.yres = 720;
lcdc_info.ch[0].lcd_cfg.left_margin = 220;
lcdc_info.ch[0].lcd_cfg.right_margin = 110;
lcdc_info.ch[0].lcd_cfg.hsync_len = 40;
lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
lcdc_info.ch[0].lcd_cfg = lcdc_720p_modes;
lcdc_info.ch[0].num_cfg = ARRAY_SIZE(lcdc_720p_modes);
} else {
/* VGA */
lcdc_info.ch[0].lcd_cfg.xres = 640;
lcdc_info.ch[0].lcd_cfg.yres = 480;
lcdc_info.ch[0].lcd_cfg.left_margin = 105;
lcdc_info.ch[0].lcd_cfg.right_margin = 50;
lcdc_info.ch[0].lcd_cfg.hsync_len = 96;
lcdc_info.ch[0].lcd_cfg.upper_margin = 33;
lcdc_info.ch[0].lcd_cfg.lower_margin = 10;
lcdc_info.ch[0].lcd_cfg.vsync_len = 2;
lcdc_info.ch[0].lcd_cfg = lcdc_vga_modes;
lcdc_info.ch[0].num_cfg = ARRAY_SIZE(lcdc_vga_modes);
}
if (sw & SW41_A) {

32
drivers/video/sh_mipi_dsi.c
Просмотреть файл

@ -123,83 +123,87 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
u32 linelength;
bool yuv;
/* Select data format */
/*
* Select data format. MIPI DSI is not hot-pluggable, so, we just use
* the default videomode. If this ever becomes a problem, We'll have to
* move this to mipi_display_on() above and use info->var.xres
*/
switch (pdata->data_format) {
case MIPI_RGB888:
pctype = 0;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
linelength = ch->lcd_cfg.xres * 3;
linelength = ch->lcd_cfg[0].xres * 3;
yuv = false;
break;
case MIPI_RGB565:
pctype = 1;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
linelength = ch->lcd_cfg.xres * 2;
linelength = ch->lcd_cfg[0].xres * 2;
yuv = false;
break;
case MIPI_RGB666_LP:
pctype = 2;
datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
linelength = ch->lcd_cfg.xres * 3;
linelength = ch->lcd_cfg[0].xres * 3;
yuv = false;
break;
case MIPI_RGB666:
pctype = 3;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
linelength = (ch->lcd_cfg.xres * 18 + 7) / 8;
linelength = (ch->lcd_cfg[0].xres * 18 + 7) / 8;
yuv = false;
break;
case MIPI_BGR888:
pctype = 8;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_24;
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
linelength = ch->lcd_cfg.xres * 3;
linelength = ch->lcd_cfg[0].xres * 3;
yuv = false;
break;
case MIPI_BGR565:
pctype = 9;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_16;
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
linelength = ch->lcd_cfg.xres * 2;
linelength = ch->lcd_cfg[0].xres * 2;
yuv = false;
break;
case MIPI_BGR666_LP:
pctype = 0xa;
datatype = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
pixfmt = MIPI_DCS_PIXEL_FMT_24BIT;
linelength = ch->lcd_cfg.xres * 3;
linelength = ch->lcd_cfg[0].xres * 3;
yuv = false;
break;
case MIPI_BGR666:
pctype = 0xb;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_18;
pixfmt = MIPI_DCS_PIXEL_FMT_18BIT;
linelength = (ch->lcd_cfg.xres * 18 + 7) / 8;
linelength = (ch->lcd_cfg[0].xres * 18 + 7) / 8;
yuv = false;
break;
case MIPI_YUYV:
pctype = 4;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
linelength = ch->lcd_cfg.xres * 2;
linelength = ch->lcd_cfg[0].xres * 2;
yuv = true;
break;
case MIPI_UYVY:
pctype = 5;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16;
pixfmt = MIPI_DCS_PIXEL_FMT_16BIT;
linelength = ch->lcd_cfg.xres * 2;
linelength = ch->lcd_cfg[0].xres * 2;
yuv = true;
break;
case MIPI_YUV420_L:
pctype = 6;
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
linelength = (ch->lcd_cfg.xres * 12 + 7) / 8;
linelength = (ch->lcd_cfg[0].xres * 12 + 7) / 8;
yuv = true;
break;
case MIPI_YUV420:
@ -207,7 +211,7 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
datatype = MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12;
pixfmt = MIPI_DCS_PIXEL_FMT_12BIT;
/* Length of U/V line */
linelength = (ch->lcd_cfg.xres + 1) / 2;
linelength = (ch->lcd_cfg[0].xres + 1) / 2;
yuv = true;
break;
default:
@ -281,7 +285,7 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
iowrite32(0x00e00000, base + 0x8024); /* VMCTR2 */
/*
* 0x660 = 1632 bytes per line (RGB24, 544 pixels: see
* sh_mobile_lcdc_info.ch[0].lcd_cfg.xres), HSALEN = 1 - default
* sh_mobile_lcdc_info.ch[0].lcd_cfg[0].xres), HSALEN = 1 - default
* (unused, since VMCTR2[HSABM] = 0)
*/
iowrite32(1 | (linelength << 16), base + 0x8028); /* VMLEN1 */

3
drivers/video/sh_mobile_hdmi.c
Просмотреть файл

@ -777,7 +777,8 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
goto egetclk;
}
rate = PICOS2KHZ(pdata->lcd_chan->lcd_cfg.pixclock) * 1000;
/* TODO: reconfigure the clock on monitor plug in */
rate = PICOS2KHZ(pdata->lcd_chan->lcd_cfg[0].pixclock) * 1000;
rate = clk_round_rate(hdmi->hdmi_clk, rate);
if (rate < 0) {

10
drivers/video/sh_mobile_lcdcfb.c
Просмотреть файл

@ -989,8 +989,8 @@ static int sh_mobile_lcdc_notify(struct notifier_block *nb,
int ret;
/* Can we handle this display? */
if (var->xres > ch->cfg.lcd_cfg.xres ||
var->yres > ch->cfg.lcd_cfg.yres)
if (var->xres > ch->cfg.lcd_cfg[0].xres ||
var->yres > ch->cfg.lcd_cfg[0].yres)
return -ENOMEM;
/* Add to the modelist */
@ -1115,7 +1115,7 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
info = ch->info;
var = &info->var;
lcd_cfg = &cfg->lcd_cfg;
lcd_cfg = &cfg->lcd_cfg[0];
info->fbops = &sh_mobile_lcdc_ops;
fb_videomode_to_var(var, lcd_cfg);
/* Default Y virtual resolution is 2x panel size */
@ -1187,8 +1187,8 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
pdev->name,
(ch->cfg.chan == LCDC_CHAN_MAINLCD) ?
"mainlcd" : "sublcd",
(int) ch->cfg.lcd_cfg.xres,
(int) ch->cfg.lcd_cfg.yres,
(int) ch->cfg.lcd_cfg[0].xres,
(int) ch->cfg.lcd_cfg[0].yres,
ch->cfg.bpp);
/* deferred io mode: disable clock to save power */

3
include/video/sh_mobile_lcdc.h
Просмотреть файл

@ -70,7 +70,8 @@ struct sh_mobile_lcdc_chan_cfg {
int interface_type; /* selects RGBn or SYSn I/F, see above */
int clock_divider;
unsigned long flags; /* LCDC_FLAGS_... */
struct fb_videomode lcd_cfg;
const struct fb_videomode *lcd_cfg;
int num_cfg;
struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg;
struct sh_mobile_lcdc_board_cfg board_cfg;
struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */