microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

PCI: keystone: Assume controller is already in RC mode 

Keystone PCI hardware supports both RC and EP modes and devcfg register has
bits to boot strap the device to either of these modes.  It seems proper to
add this functionality to the boot loader rather than in the driver as
device will be operating in either mode, not both any time.  Currently the
driver supports only RC mode and hence register configuration in the driver
is not needed and the driver can assume the hardware is in RC mode.

Also update the DT documentation accordingly.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Murali Karicheri 2014-09-10 13:12:38 -04:00 коммит произвёл Bjorn Helgaas
Родитель c15982dfa8
Коммит 4455efc908
2 изменённых файлов: 3 добавлений и 22 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

4
Documentation/devicetree/bindings/pci/pci-keystone.txt
Просмотреть файл

@ -13,9 +13,7 @@ Required Properties:-
compatibility: "ti,keystone-pcie"
reg: index 1 is the base address and length of DW application registers.
index 2 is the base address and length of PCI mode configuration
register.
index 3 is the base address and length of PCI device ID register.
index 2 is the base address and length of PCI device ID register.
pcie_msi_intc : Interrupt controller device node for MSI IRQ chip
interrupt-cells: should be set to 1

21
drivers/pci/host/pci-keystone.c
Просмотреть файл

@ -35,10 +35,6 @@
#define MAX_MSI_HOST_IRQS 8
#define MAX_LEGACY_HOST_IRQS 4
/* RC mode settings masks */
#define PCIE_RC_MODE BIT(2)
#define PCIE_MODE_MASK (BIT(1) | BIT(2))
/* DEV_STAT_CTRL */
#define PCIE_CAP_BASE 0x70
@ -355,7 +351,6 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
void __iomem *reg_p;
struct phy *phy;
int ret = 0;
u32 val;
ks_pcie = devm_kzalloc(&pdev->dev, sizeof(*ks_pcie),
GFP_KERNEL);
@ -365,18 +360,6 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
}
pp = &ks_pcie->pp;
/* index 2 is the devcfg register for RC mode settings */
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
reg_p = devm_ioremap_resource(dev, res);
if (IS_ERR(reg_p))
return PTR_ERR(reg_p);
/* enable RC mode in devcfg */
val = readl(reg_p);
val &= ~PCIE_MODE_MASK;
val |= PCIE_RC_MODE;
writel(val, reg_p);
/* initialize SerDes Phy if present */
phy = devm_phy_get(dev, "pcie-phy");
if (!IS_ERR_OR_NULL(phy)) {
@ -385,8 +368,8 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
return ret;
}
/* index 3 is to read PCI DEVICE_ID */
res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
/* index 2 is to read PCI DEVICE_ID */
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
reg_p = devm_ioremap_resource(dev, res);
if (IS_ERR(reg_p))
return PTR_ERR(reg_p);