Merge branch 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal fixes from Zhang Rui:
 "Specifics:

   - update Email address of Thermal subsystem maintainer Eduardo
     Valentin.

   - fix a problem that unloading thermal module results in kernel crash
     because a non-exist device file is removed on thermal unload.

   - fix a problem that critical trip point is set wrongly on latest
     i.MX6 SOC and results in system critical shutdown.

   - a couple of fixes to Tmon tool, of-thermal code and ti thermal
     driver"

* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  tmon: set umask to a reasonable value
  tmon: Check log file for common secuirty issues
  tools/thermal: tmon: fix compilation errors when building statically
  thermal: ti-soc-thermal: ti-bandgap.c: Cleaning up wrong address is checked
  Thermal: imx: correct critical trip temperature setting
  thermal: Bind cooling devices with the correct arguments
  thermal: Add braces around suspect code
  thermal: hwmon: Make the check for critical temp valid consistent
  MAINTAINERS: Update Eduardo Valentin's email address

MAINTAINERS

@@ -8984,7 +8984,7 @@ F:	drivers/media/radio/radio-raremono.c
 
 THERMAL
 M:	Zhang Rui <rui.zhang@intel.com>
-M:	Eduardo Valentin <eduardo.valentin@ti.com>
+M:	Eduardo Valentin <edubezval@gmail.com>
 L:	linux-pm@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
@@ -9011,7 +9011,7 @@ S:	Maintained
 F:	drivers/platform/x86/thinkpad_acpi.c
 
 TI BANDGAP AND THERMAL DRIVER
-M:	Eduardo Valentin <eduardo.valentin@ti.com>
+M:	Eduardo Valentin <edubezval@gmail.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 F:	drivers/thermal/ti-soc-thermal/

drivers/thermal/imx_thermal.c

@@ -306,7 +306,7 @@ static int imx_get_sensor_data(struct platform_device *pdev)
 {
 	struct imx_thermal_data *data = platform_get_drvdata(pdev);
 	struct regmap *map;
-	int t1, t2, n1, n2;
+	int t1, n1;
 	int ret;
 	u32 val;
 	u64 temp64;
@@ -333,14 +333,10 @@ static int imx_get_sensor_data(struct platform_device *pdev)
 	/*
 	 * Sensor data layout:
 	 *   [31:20] - sensor value @ 25C
-	 *    [19:8] - sensor value of hot
-	 *     [7:0] - hot temperature value
 	 * Use universal formula now and only need sensor value @ 25C
 	 * slope = 0.4297157 - (0.0015976 * 25C fuse)
 	 */
 	n1 = val >> 20;
-	n2 = (val & 0xfff00) >> 8;
-	t2 = val & 0xff;
 	t1 = 25; /* t1 always 25C */
 
 	/*
@@ -366,16 +362,16 @@ static int imx_get_sensor_data(struct platform_device *pdev)
 	data->c2 = n1 * data->c1 + 1000 * t1;
 
 	/*
-	 * Set the default passive cooling trip point to 20 °C below the
-	 * maximum die temperature. Can be changed from userspace.
+	 * Set the default passive cooling trip point,
+	 * can be changed from userspace.
 	 */
-	data->temp_passive = 1000 * (t2 - 20);
+	data->temp_passive = IMX_TEMP_PASSIVE;
 
 	/*
-	 * The maximum die temperature is t2, let's give 5 °C cushion
-	 * for noise and possible temperature rise between measurements.
+	 * The maximum die temperature set to 20 C higher than
+	 * IMX_TEMP_PASSIVE.
 	 */
-	data->temp_critical = 1000 * (t2 - 5);
+	data->temp_critical = 1000 * 20 + data->temp_passive;
 
 	return 0;
 }

drivers/thermal/of-thermal.c

@@ -156,8 +156,8 @@ static int of_thermal_bind(struct thermal_zone_device *thermal,
 
 			ret = thermal_zone_bind_cooling_device(thermal,
 						tbp->trip_id, cdev,
-						tbp->min,
-						tbp->max);
+						tbp->max,
+						tbp->min);
 			if (ret)
 				return ret;
 		}
@@ -712,11 +712,12 @@ thermal_of_build_thermal_zone(struct device_node *np)
 	}
 
 	i = 0;
-	for_each_child_of_node(child, gchild)
+	for_each_child_of_node(child, gchild) {
 		ret = thermal_of_populate_bind_params(gchild, &tz->tbps[i++],
 						      tz->trips, tz->ntrips);
 		if (ret)
 			goto free_tbps;
+	}
 
 finish:
 	of_node_put(child);

drivers/thermal/thermal_hwmon.c

@@ -140,6 +140,12 @@ thermal_hwmon_lookup_temp(const struct thermal_hwmon_device *hwmon,
 	return NULL;
 }
 
+static bool thermal_zone_crit_temp_valid(struct thermal_zone_device *tz)
+{
+	unsigned long temp;
+	return tz->ops->get_crit_temp && !tz->ops->get_crit_temp(tz, &temp);
+}
+
 int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 {
 	struct thermal_hwmon_device *hwmon;
@@ -189,21 +195,18 @@ int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 	if (result)
 		goto free_temp_mem;
 
-	if (tz->ops->get_crit_temp) {
-		unsigned long temperature;
-		if (!tz->ops->get_crit_temp(tz, &temperature)) {
-			snprintf(temp->temp_crit.name,
-				 sizeof(temp->temp_crit.name),
+	if (thermal_zone_crit_temp_valid(tz)) {
+		snprintf(temp->temp_crit.name,
+				sizeof(temp->temp_crit.name),
 				"temp%d_crit", hwmon->count);
-			temp->temp_crit.attr.attr.name = temp->temp_crit.name;
-			temp->temp_crit.attr.attr.mode = 0444;
-			temp->temp_crit.attr.show = temp_crit_show;
-			sysfs_attr_init(&temp->temp_crit.attr.attr);
-			result = device_create_file(hwmon->device,
-						    &temp->temp_crit.attr);
-			if (result)
-				goto unregister_input;
-		}
+		temp->temp_crit.attr.attr.name = temp->temp_crit.name;
+		temp->temp_crit.attr.attr.mode = 0444;
+		temp->temp_crit.attr.show = temp_crit_show;
+		sysfs_attr_init(&temp->temp_crit.attr.attr);
+		result = device_create_file(hwmon->device,
+					    &temp->temp_crit.attr);
+		if (result)
+			goto unregister_input;
 	}
 
 	mutex_lock(&thermal_hwmon_list_lock);
@@ -250,7 +253,7 @@ void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
 	}
 
 	device_remove_file(hwmon->device, &temp->temp_input.attr);
-	if (tz->ops->get_crit_temp)
+	if (thermal_zone_crit_temp_valid(tz))
 		device_remove_file(hwmon->device, &temp->temp_crit.attr);
 
 	mutex_lock(&thermal_hwmon_list_lock);

drivers/thermal/ti-soc-thermal/ti-bandgap.c

@@ -1155,7 +1155,7 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
 	/* register shadow for context save and restore */
 	bgp->regval = devm_kzalloc(&pdev->dev, sizeof(*bgp->regval) *
 				   bgp->conf->sensor_count, GFP_KERNEL);
-	if (!bgp) {
+	if (!bgp->regval) {
 		dev_err(&pdev->dev, "Unable to allocate mem for driver ref\n");
 		return ERR_PTR(-ENOMEM);
 	}

tools/thermal/tmon/Makefile

@@ -21,7 +21,7 @@ OBJS = tmon.o tui.o sysfs.o pid.o
 OBJS +=
 
 tmon: $(OBJS) Makefile tmon.h
-	$(CC) ${CFLAGS} $(LDFLAGS) $(OBJS)  -o $(TARGET) -lm -lpanel -lncursesw  -lpthread
+	$(CC) ${CFLAGS} $(LDFLAGS) $(OBJS)  -o $(TARGET) -lm -lpanel -lncursesw -ltinfo -lpthread
 
 valgrind: tmon
 	 sudo valgrind -v --track-origins=yes --tool=memcheck --leak-check=yes --show-reachable=yes --num-callers=20 --track-fds=yes ./$(TARGET)  1> /dev/null

tools/thermal/tmon/tmon.c

@@ -142,6 +142,7 @@ static void start_syslog(void)
 static void prepare_logging(void)
 {
 	int i;
+	struct stat logstat;
 
 	if (!logging)
 		return;
@@ -152,6 +153,29 @@ static void prepare_logging(void)
 		return;
 	}
 
+	if (lstat(TMON_LOG_FILE, &logstat) < 0) {
+		syslog(LOG_ERR, "Unable to stat log file %s\n", TMON_LOG_FILE);
+		fclose(tmon_log);
+		tmon_log = NULL;
+		return;
+	}
+
+	/* The log file must be a regular file owned by us */
+	if (S_ISLNK(logstat.st_mode)) {
+		syslog(LOG_ERR, "Log file is a symlink.  Will not log\n");
+		fclose(tmon_log);
+		tmon_log = NULL;
+		return;
+	}
+
+	if (logstat.st_uid != getuid()) {
+		syslog(LOG_ERR, "We don't own the log file.  Not logging\n");
+		fclose(tmon_log);
+		tmon_log = NULL;
+		return;
+	}
+
+
 	fprintf(tmon_log, "#----------- THERMAL SYSTEM CONFIG -------------\n");
 	for (i = 0; i < ptdata.nr_tz_sensor; i++) {
 		char binding_str[33]; /* size of long + 1 */
@@ -331,7 +355,7 @@ static void start_daemon_mode()
 	disable_tui();
 
 	/* change the file mode mask */
-	umask(0);
+	umask(S_IWGRP | S_IWOTH);
 
 	/* new SID for the daemon process */
 	sid = setsid();