Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (28 commits)
  powerpc: Fix oops when loading modules
  powerpc: Wire up preadv and pwritev
  powerpc/ftrace: Fix printf format warning
  powerpc/ftrace: Fix #if that should be #ifdef
  powerpc: Fix ptrace compat wrapper for FPU register access
  powerpc: Print information about mapping hw irqs to virtual irqs
  powerpc: Correct dependency of KEXEC
  powerpc: Disable VSX or current process in giveup_fpu/altivec
  powerpc/pseries: Enable relay in pseries_defconfig
  powerpc/pseries: Fix ibm,client-architecture comment
  powerpc/pseries: Scan for all events in rtasd
  powerpc/pseries: Add dispatch dispersion statistics
  powerpc: Clean up some prom printouts
  powerpc: Print progress of ibm,client-architecture method
  powerpc: Remove duplicated #include's
  powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBook
  powerpc/wdrtas: Update wdrtas_get_interval to use rtas_data_buf
  fsl-diu-fb: Pass the proper device for dma mapping routines
  powerpc/pq2fads: Update device tree for use with device-tree-aware u-boot.
  cpm_uart: Disable CPM udbg when re-initing CPM uart, even if not the console.
  ...

arch/powerpc/Kconfig

@@ -316,7 +316,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on BOOK3S && EXPERIMENTAL
+	depends on PPC_BOOK3S && EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -775,6 +775,7 @@ config LOWMEM_CAM_NUM_BOOL
 	  Say N here unless you know what you are doing.
 
 config LOWMEM_CAM_NUM
+	depends on FSL_BOOKE
 	int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
 	default 3
 

arch/powerpc/boot/dts/ksi8560.dts

@@ -57,14 +57,14 @@
 		bus-frequency = <0>;				/* Fixed by bootwrapper */
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <0x12 0x2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;		/* 32 bytes */
 			cache-size = <0x40000>;			/* L2, 256K */

arch/powerpc/boot/dts/pq2fads.dts

@@ -17,6 +17,14 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -45,7 +53,7 @@
 		#size-cells = <1>;
 		reg = <0xf0010100 0x60>;
 
-		ranges = <0x0 0x0 0xfe000000 0x800000
+		ranges = <0x0 0x0 0xff800000 0x800000
 		          0x1 0x0 0xf4500000 0x8000
 		          0x8 0x0 0xf8200000 0x8000>;
 
@@ -71,7 +79,7 @@
 		};
 	};
 
-	pci@f0010800 {
+	pci0: pci@f0010800 {
 		device_type = "pci";
 		reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
 		compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
@@ -142,7 +150,7 @@
 				reg = <0x119f0 0x10 0x115f0 0x10>;
 			};
 
-			serial@11a00 {
+			serial0: serial@11a00 {
 				device_type = "serial";
 				compatible = "fsl,mpc8280-scc-uart",
 				             "fsl,cpm2-scc-uart";
@@ -153,7 +161,7 @@
 				fsl,cpm-command = <0x800000>;
 			};
 
-			serial@11a20 {
+			serial1: serial@11a20 {
 				device_type = "serial";
 				compatible = "fsl,mpc8280-scc-uart",
 				             "fsl,cpm2-scc-uart";
@@ -164,7 +172,7 @@
 				fsl,cpm-command = <0x4a00000>;
 			};
 
-			ethernet@11320 {
+			enet0: ethernet@11320 {
 				device_type = "network";
 				compatible = "fsl,mpc8280-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
@@ -176,7 +184,7 @@
 				fsl,cpm-command = <0x16200300>;
 			};
 
-			ethernet@11340 {
+			enet1: ethernet@11340 {
 				device_type = "network";
 				compatible = "fsl,mpc8280-fcc-enet",
 				             "fsl,cpm2-fcc-enet";

arch/powerpc/boot/dts/sbc8548.dts

@@ -156,14 +156,14 @@
 		compatible = "simple-bus";
 
 		memory-controller@2000 {
-			compatible = "fsl,8548-memory-controller";
+			compatible = "fsl,mpc8548-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <0x12 0x2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8548-l2-cache-controller";
+			compatible = "fsl,mpc8548-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;	// 32 bytes
 			cache-size = <0x80000>;	// L2, 512K

arch/powerpc/boot/dts/sbc8560.dts

@@ -61,14 +61,14 @@
 		clock-frequency = <0>;
 
 		memory-controller@2000 {
-			compatible = "fsl,8560-memory-controller";
+			compatible = "fsl,mpc8560-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <0x12 0x2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8560-l2-cache-controller";
+			compatible = "fsl,mpc8560-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;	// 32 bytes
 			cache-size = <0x40000>;		// L2, 256K

arch/powerpc/boot/dts/socrates.dts

@@ -52,6 +52,7 @@
 	soc8544@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
+		device_type = "soc";
 
 		ranges = <0x00000000 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00001000>;	// CCSRBAR 1M

arch/powerpc/boot/dts/stx_gp3_8560.dts

@@ -57,14 +57,14 @@
 		compatible = "fsl,mpc8560-immr", "simple-bus";
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
 			cache-size = <0x40000>;	// L2, 256K

arch/powerpc/boot/dts/tqm8540.dts

@@ -59,14 +59,14 @@
 		compatible = "fsl,mpc8540-immr", "simple-bus";
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
 			cache-size = <0x40000>;	// L2, 256K

arch/powerpc/boot/dts/tqm8541.dts

@@ -58,14 +58,14 @@
 		compatible = "fsl,mpc8541-immr", "simple-bus";
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
 			cache-size = <0x40000>;	// L2, 256K

arch/powerpc/boot/dts/tqm8555.dts

@@ -58,14 +58,14 @@
 		compatible = "fsl,mpc8555-immr", "simple-bus";
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
 			cache-size = <0x40000>;	// L2, 256K

arch/powerpc/boot/dts/tqm8560.dts

@@ -60,14 +60,14 @@
 		compatible = "fsl,mpc8560-immr", "simple-bus";
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
 			cache-size = <0x40000>;	// L2, 256K

arch/powerpc/configs/pseries_defconfig

@@ -95,7 +95,7 @@ CONFIG_CGROUP_CPUACCT=y
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_PROC_PID_CPUSET=y
-# CONFIG_RELAY is not set
+CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_IPC_NS is not set

arch/powerpc/include/asm/lppaca.h

@@ -125,7 +125,7 @@ struct lppaca {
 	// NOTE: This value will ALWAYS be zero for dedicated processors and
 	// will NEVER be zero for shared processors (ie, initialized to a 1).
 	volatile u32 yield_count;	// PLIC increments each dispatchx00-x03
-	u32 reserved6;
+	volatile u32 dispersion_count;	// dispatch changed phys cpu    x04-x07
 	volatile u64 cmo_faults;	// CMO page fault count         x08-x0F
 	volatile u64 cmo_fault_time;	// CMO page fault time          x10-x17
 	u8	reserved7[104];		// Reserved                     x18-x7F

arch/powerpc/include/asm/mpic.h

@@ -22,6 +22,14 @@
 #define MPIC_GREG_FEATURE_1		0x00010
 #define MPIC_GREG_GLOBAL_CONF_0		0x00020
 #define		MPIC_GREG_GCONF_RESET			0x80000000
+/* On the FSL mpic implementations the Mode field is expand to be
+ * 2 bits wide:
+ *	0b00 = pass through (interrupts routed to IRQ0)
+ *	0b01 = Mixed mode
+ *	0b10 = reserved
+ *	0b11 = External proxy / coreint
+ */
+#define		MPIC_GREG_GCONF_COREINT			0x60000000
 #define		MPIC_GREG_GCONF_8259_PTHROU_DIS		0x20000000
 #define		MPIC_GREG_GCONF_NO_BIAS			0x10000000
 #define		MPIC_GREG_GCONF_BASE_MASK		0x000fffff
@@ -357,6 +365,8 @@ struct mpic
 #define MPIC_BROKEN_FRR_NIRQS		0x00000800
 /* Destination only supports a single CPU at a time */
 #define MPIC_SINGLE_DEST_CPU		0x00001000
+/* Enable CoreInt delivery of interrupts */
+#define MPIC_ENABLE_COREINT		0x00002000
 
 /* MPIC HW modification ID */
 #define MPIC_REGSET_MASK		0xf0000000
@@ -470,6 +480,8 @@ extern void mpic_end_irq(unsigned int irq);
 extern unsigned int mpic_get_one_irq(struct mpic *mpic);
 /* This one gets from the primary mpic */
 extern unsigned int mpic_get_irq(void);
+/* This one gets from the primary mpic via CoreInt*/
+extern unsigned int mpic_get_coreint_irq(void);
 /* Fetch Machine Check interrupt from primary mpic */
 extern unsigned int mpic_get_mcirq(void);
 

arch/powerpc/include/asm/ps3fb.h

@@ -21,7 +21,6 @@
 
 #include <linux/types.h>
 #include <linux/ioctl.h>
-#include <linux/types.h>
 
 /* ioctl */
 #define PS3FB_IOCTL_SETMODE       _IOW('r',  1, int) /* set video mode */

arch/powerpc/include/asm/pte-common.h

@@ -151,9 +151,11 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
 				 _PAGE_NO_CACHE)
 #define PAGE_KERNEL_NCG	__pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \
 				 _PAGE_NO_CACHE | _PAGE_GUARDED)
-#define PAGE_KERNEL_X	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RW | _PAGE_EXEC)
+#define PAGE_KERNEL_X	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RW | _PAGE_EXEC | \
+				 _PAGE_HWEXEC)
 #define PAGE_KERNEL_RO	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RO)
-#define PAGE_KERNEL_ROX	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RO | _PAGE_EXEC)
+#define PAGE_KERNEL_ROX	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RO | _PAGE_EXEC | \
+				 _PAGE_HWEXEC)
 
 /* Protection used for kernel text. We want the debuggers to be able to
  * set breakpoints anywhere, so don't write protect the kernel text

arch/powerpc/include/asm/reg.h

@@ -143,6 +143,36 @@
 #define FPSCR_NI	0x00000004	/* FPU non IEEE-Mode */
 #define FPSCR_RN	0x00000003	/* FPU rounding control */
 
+/* Bit definitions for SPEFSCR. */
+#define SPEFSCR_SOVH	0x80000000	/* Summary integer overflow high */
+#define SPEFSCR_OVH	0x40000000	/* Integer overflow high */
+#define SPEFSCR_FGH	0x20000000	/* Embedded FP guard bit high */
+#define SPEFSCR_FXH	0x10000000	/* Embedded FP sticky bit high */
+#define SPEFSCR_FINVH	0x08000000	/* Embedded FP invalid operation high */
+#define SPEFSCR_FDBZH	0x04000000	/* Embedded FP div by zero high */
+#define SPEFSCR_FUNFH	0x02000000	/* Embedded FP underflow high */
+#define SPEFSCR_FOVFH	0x01000000	/* Embedded FP overflow high */
+#define SPEFSCR_FINXS	0x00200000	/* Embedded FP inexact sticky */
+#define SPEFSCR_FINVS	0x00100000	/* Embedded FP invalid op. sticky */
+#define SPEFSCR_FDBZS	0x00080000	/* Embedded FP div by zero sticky */
+#define SPEFSCR_FUNFS	0x00040000	/* Embedded FP underflow sticky */
+#define SPEFSCR_FOVFS	0x00020000	/* Embedded FP overflow sticky */
+#define SPEFSCR_MODE	0x00010000	/* Embedded FP mode */
+#define SPEFSCR_SOV	0x00008000	/* Integer summary overflow */
+#define SPEFSCR_OV	0x00004000	/* Integer overflow */
+#define SPEFSCR_FG	0x00002000	/* Embedded FP guard bit */
+#define SPEFSCR_FX	0x00001000	/* Embedded FP sticky bit */
+#define SPEFSCR_FINV	0x00000800	/* Embedded FP invalid operation */
+#define SPEFSCR_FDBZ	0x00000400	/* Embedded FP div by zero */
+#define SPEFSCR_FUNF	0x00000200	/* Embedded FP underflow */
+#define SPEFSCR_FOVF	0x00000100	/* Embedded FP overflow */
+#define SPEFSCR_FINXE	0x00000040	/* Embedded FP inexact enable */
+#define SPEFSCR_FINVE	0x00000020	/* Embedded FP invalid op. enable */
+#define SPEFSCR_FDBZE	0x00000010	/* Embedded FP div by zero enable */
+#define SPEFSCR_FUNFE	0x00000008	/* Embedded FP underflow enable */
+#define SPEFSCR_FOVFE	0x00000004	/* Embedded FP overflow enable */
+#define SPEFSCR_FRMC 	0x00000003	/* Embedded FP rounding mode control */
+
 /* Special Purpose Registers (SPRNs)*/
 #define SPRN_CTR	0x009	/* Count Register */
 #define SPRN_DSCR	0x11

arch/powerpc/include/asm/reg_booke.h

@@ -423,36 +423,6 @@
 #define SGR_NORMAL	0		/* Speculative fetching allowed. */
 #define SGR_GUARDED	1		/* Speculative fetching disallowed. */
 
-/* Bit definitions for SPEFSCR. */
-#define SPEFSCR_SOVH	0x80000000	/* Summary integer overflow high */
-#define SPEFSCR_OVH	0x40000000	/* Integer overflow high */
-#define SPEFSCR_FGH	0x20000000	/* Embedded FP guard bit high */
-#define SPEFSCR_FXH	0x10000000	/* Embedded FP sticky bit high */
-#define SPEFSCR_FINVH	0x08000000	/* Embedded FP invalid operation high */
-#define SPEFSCR_FDBZH	0x04000000	/* Embedded FP div by zero high */
-#define SPEFSCR_FUNFH	0x02000000	/* Embedded FP underflow high */
-#define SPEFSCR_FOVFH	0x01000000	/* Embedded FP overflow high */
-#define SPEFSCR_FINXS	0x00200000	/* Embedded FP inexact sticky */
-#define SPEFSCR_FINVS	0x00100000	/* Embedded FP invalid op. sticky */
-#define SPEFSCR_FDBZS	0x00080000	/* Embedded FP div by zero sticky */
-#define SPEFSCR_FUNFS	0x00040000	/* Embedded FP underflow sticky */
-#define SPEFSCR_FOVFS	0x00020000	/* Embedded FP overflow sticky */
-#define SPEFSCR_MODE	0x00010000	/* Embedded FP mode */
-#define SPEFSCR_SOV	0x00008000	/* Integer summary overflow */
-#define SPEFSCR_OV	0x00004000	/* Integer overflow */
-#define SPEFSCR_FG	0x00002000	/* Embedded FP guard bit */
-#define SPEFSCR_FX	0x00001000	/* Embedded FP sticky bit */
-#define SPEFSCR_FINV	0x00000800	/* Embedded FP invalid operation */
-#define SPEFSCR_FDBZ	0x00000400	/* Embedded FP div by zero */
-#define SPEFSCR_FUNF	0x00000200	/* Embedded FP underflow */
-#define SPEFSCR_FOVF	0x00000100	/* Embedded FP overflow */
-#define SPEFSCR_FINXE	0x00000040	/* Embedded FP inexact enable */
-#define SPEFSCR_FINVE	0x00000020	/* Embedded FP invalid op. enable */
-#define SPEFSCR_FDBZE	0x00000010	/* Embedded FP div by zero enable */
-#define SPEFSCR_FUNFE	0x00000008	/* Embedded FP underflow enable */
-#define SPEFSCR_FOVFE	0x00000004	/* Embedded FP overflow enable */
-#define SPEFSCR_FRMC 	0x00000003	/* Embedded FP rounding mode control */
-
 /*
  * The IBM-403 is an even more odd special case, as it is much
  * older than the IBM-405 series.  We put these down here incase someone

arch/powerpc/include/asm/rtas.h

@@ -68,7 +68,8 @@ struct rtas_t {
 #define RTAS_EPOW_WARNING		0x40000000 /* set bit 1 */
 #define RTAS_POWERMGM_EVENTS		0x20000000 /* set bit 2 */
 #define RTAS_HOTPLUG_EVENTS		0x10000000 /* set bit 3 */
-#define RTAS_EVENT_SCAN_ALL_EVENTS	0xf0000000
+#define RTAS_IO_EVENTS			0x08000000 /* set bit 4 */
+#define RTAS_EVENT_SCAN_ALL_EVENTS	0xffffffff
 
 /* RTAS event severity */
 #define RTAS_SEVERITY_FATAL		0x5

arch/powerpc/include/asm/sfp-machine.h

@@ -29,9 +29,9 @@
 
 /* basic word size definitions */
 #define _FP_W_TYPE_SIZE		32
-#define _FP_W_TYPE		unsigned long
+#define _FP_W_TYPE		unsigned int
-#define _FP_WS_TYPE		signed long
+#define _FP_WS_TYPE		signed int
-#define _FP_I_TYPE		long
+#define _FP_I_TYPE		int
 
 #define __ll_B			((UWtype) 1 << (W_TYPE_SIZE / 2))
 #define __ll_lowpart(t)		((UWtype) (t) & (__ll_B - 1))

arch/powerpc/include/asm/systbl.h

@@ -322,3 +322,6 @@ SYSCALL_SPU(epoll_create1)
 SYSCALL_SPU(dup3)
 SYSCALL_SPU(pipe2)
 SYSCALL(inotify_init1)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(preadv)
+COMPAT_SYS_SPU(pwritev)

arch/powerpc/include/asm/unistd.h

@@ -341,10 +341,12 @@
 #define __NR_dup3		316
 #define __NR_pipe2		317
 #define __NR_inotify_init1	318
+#define __NR_preadv		320
+#define __NR_pwritev		321
 
 #ifdef __KERNEL__
 
-#define __NR_syscalls		319
+#define __NR_syscalls		322
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls

arch/powerpc/kernel/fpu.S

@@ -145,6 +145,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	beq	1f
 	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 	li	r3,MSR_FP|MSR_FE0|MSR_FE1
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	oris	r3,r3,MSR_VSX@h
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
 	andc	r4,r4,r3		/* disable FP for previous task */
 	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:

arch/powerpc/kernel/ftrace.c

@@ -293,7 +293,7 @@ __ftrace_make_nop(struct module *mod,
 	if (tramp & 0x8000)
 		tramp -= 0x10000;
 
-	pr_debug(" %x ", tramp);
+	pr_debug(" %lx ", tramp);
 
 	if (tramp != addr) {
 		printk(KERN_ERR
@@ -564,7 +564,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
 
-#if CONFIG_PPC64
+#ifdef CONFIG_PPC64
 	/* non core kernel code needs to save and restore the TOC */
 	if (REGION_ID(self_addr) != KERNEL_REGION_ID)
 		return_hooker = (unsigned long)&mod_return_to_handler;

arch/powerpc/kernel/irq.c

@@ -672,11 +672,13 @@ unsigned int irq_create_mapping(struct irq_host *host,
 			return NO_IRQ;
 		}
 	}
-	pr_debug("irq: -> obtained virq %d\n", virq);
 
 	if (irq_setup_virq(host, virq, hwirq))
 		return NO_IRQ;
 
+	printk(KERN_DEBUG "irq: irq %lu on host %s mapped to virtual irq %u\n",
+		hwirq, host->of_node ? host->of_node->full_name : "null", virq);
+
 	return virq;
 }
 EXPORT_SYMBOL_GPL(irq_create_mapping);

arch/powerpc/kernel/lparcfg.c

@@ -434,6 +434,21 @@ static void pseries_cmo_data(struct seq_file *m)
 	seq_printf(m, "cmo_page_size=%lu\n", cmo_get_page_size());
 }
 
+static void splpar_dispatch_data(struct seq_file *m)
+{
+	int cpu;
+	unsigned long dispatches = 0;
+	unsigned long dispatch_dispersions = 0;
+
+	for_each_possible_cpu(cpu) {
+		dispatches += lppaca[cpu].yield_count;
+		dispatch_dispersions += lppaca[cpu].dispersion_count;
+	}
+
+	seq_printf(m, "dispatches=%lu\n", dispatches);
+	seq_printf(m, "dispatch_dispersions=%lu\n", dispatch_dispersions);
+}
+
 static int pseries_lparcfg_data(struct seq_file *m, void *v)
 {
 	int partition_potential_processors;
@@ -460,6 +475,7 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 		parse_ppp_data(m);
 		parse_mpp_data(m);
 		pseries_cmo_data(m);
+		splpar_dispatch_data(m);
 
 		seq_printf(m, "purr=%ld\n", get_purr());
 	} else {		/* non SPLPAR case */

arch/powerpc/kernel/misc_64.S

@@ -495,7 +495,15 @@ _GLOBAL(giveup_altivec)
 	stvx	vr0,r4,r3
 	beq	1f
 	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	lis	r3,(MSR_VEC|MSR_VSX)@h
+FTR_SECTION_ELSE
 	lis	r3,MSR_VEC@h
+ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX)
+#else
+	lis	r3,MSR_VEC@h
+#endif
 	andc	r4,r4,r3		/* disable FP for previous task */
 	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:

arch/powerpc/kernel/prom_init.c

@@ -614,7 +614,7 @@ static unsigned char ibm_architecture_vec[] = {
 	W(0xffffffff),			/* virt_base */
 	W(0xffffffff),			/* virt_size */
 	W(0xffffffff),			/* load_base */
-	W(64),				/* 128MB min RMA */
+	W(64),				/* 64MB min RMA */
 	W(0xffffffff),			/* full client load */
 	0,				/* min RMA percentage of total RAM */
 	48,				/* max log_2(hash table size) */
@@ -732,15 +732,17 @@ static void __init prom_send_capabilities(void)
 	root = call_prom("open", 1, 1, ADDR("/"));
 	if (root != 0) {
 		/* try calling the ibm,client-architecture-support method */
+		prom_printf("Calling ibm,client-architecture...");
 		if (call_prom_ret("call-method", 3, 2, &ret,
 				  ADDR("ibm,client-architecture-support"),
 				  root,
 				  ADDR(ibm_architecture_vec)) == 0) {
 			/* the call exists... */
 			if (ret)
-				prom_printf("WARNING: ibm,client-architecture"
+				prom_printf("\nWARNING: ibm,client-architecture"
 					    "-support call FAILED!\n");
 			call_prom("close", 1, 0, root);
+			prom_printf(" done\n");
 			return;
 		}
 		call_prom("close", 1, 0, root);
@@ -1083,7 +1085,7 @@ static void __init prom_instantiate_rtas(void)
 		return;
 	}
 
-	prom_printf("instantiating rtas at 0x%x ...", base);
+	prom_printf("instantiating rtas at 0x%x...", base);
 
 	if (call_prom_ret("call-method", 3, 2, &entry,
 			  ADDR("instantiate-rtas"),
@@ -1495,7 +1497,7 @@ static int __init prom_find_machine_type(void)
 		return PLATFORM_GENERIC;
 	x = prom_getproplen(rtas, "ibm,hypertas-functions");
 	if (x != PROM_ERROR) {
-		prom_printf("Hypertas detected, assuming LPAR !\n");
+		prom_debug("Hypertas detected, assuming LPAR !\n");
 		return PLATFORM_PSERIES_LPAR;
 	}
 	return PLATFORM_PSERIES;
@@ -1544,7 +1546,7 @@ static void __init prom_check_displays(void)
 	};
 	const unsigned char *clut;
 
-	prom_printf("Looking for displays\n");
+	prom_debug("Looking for displays\n");
 	for (node = 0; prom_next_node(&node); ) {
 		memset(type, 0, sizeof(type));
 		prom_getprop(node, "device_type", type, sizeof(type));
@@ -1562,7 +1564,7 @@ static void __init prom_check_displays(void)
 		if (call_prom("package-to-path", 3, 1, node, path,
 			      PROM_SCRATCH_SIZE-10) == PROM_ERROR)
 			continue;
-		prom_printf("found display   : %s, opening ... ", path);
+		prom_printf("found display   : %s, opening... ", path);
 		
 		ih = call_prom("open", 1, 1, path);
 		if (ih == 0) {
@@ -2387,7 +2389,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	/*
 	 * Now finally create the flattened device-tree
 	 */
-	prom_printf("copying OF device tree ...\n");
+	prom_printf("copying OF device tree...\n");
 	flatten_device_tree();
 
 	/*
@@ -2402,7 +2404,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	 * Call OF "quiesce" method to shut down pending DMA's from
 	 * devices etc...
 	 */
-	prom_printf("Calling quiesce ...\n");
+	prom_printf("Calling quiesce...\n");
 	call_prom("quiesce", 0, 0);
 
 	/*

arch/powerpc/kernel/ptrace32.c

@@ -67,7 +67,8 @@ static long compat_ptrace_old(struct task_struct *child, long request,
 /* Macros to workout the correct index for the FPR in the thread struct */
 #define FPRNUMBER(i) (((i) - PT_FPR0) >> 1)
 #define FPRHALF(i) (((i) - PT_FPR0) & 1)
-#define FPRINDEX(i) TS_FPRWIDTH * FPRNUMBER(i) + FPRHALF(i)
+#define FPRINDEX(i) TS_FPRWIDTH * FPRNUMBER(i) * 2 + FPRHALF(i)
+#define FPRINDEX_3264(i) (TS_FPRWIDTH * ((i) - PT_FPR0))
 
 long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			compat_ulong_t caddr, compat_ulong_t cdata)
@@ -168,8 +169,9 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 		CHECK_FULL_REGS(child->thread.regs);
 		if (numReg >= PT_FPR0) {
 			flush_fp_to_thread(child);
-			tmp = ((unsigned long int *)child->thread.fpr)
+			/* get 64 bit FPR */
-				[FPRINDEX(numReg)];
+			tmp = ((u64 *)child->thread.fpr)
+				[FPRINDEX_3264(numReg)];
 		} else { /* register within PT_REGS struct */
 			tmp = ptrace_get_reg(child, numReg);
 		} 
@@ -262,8 +264,13 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 				freg = (freg & 0xfffffffful) | (data << 32);
 			ret = ptrace_put_reg(child, numReg, freg);
 		} else {
+			u64 *tmp;
 			flush_fp_to_thread(child);
-			((unsigned int *)child->thread.regs)[index] = data;
+			/* get 64 bit FPR ... */
+			tmp = &(((u64 *)child->thread.fpr)
+				[FPRINDEX_3264(numReg)]);
+			/* ... write the 32 bit part we want */
+			((u32 *)tmp)[index % 2] = data;
 			ret = 0;
 		}
 		break;

arch/powerpc/kernel/setup-common.c

@@ -36,7 +36,6 @@
 #include <linux/percpu.h>
 #include <linux/lmb.h>
 #include <linux/of_platform.h>
-#include <linux/platform_device.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/processor.h>

arch/powerpc/sysdev/mpic.c

@@ -1170,6 +1170,12 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 			mb();
 	}
 
+	/* CoreInt */
+	if (flags & MPIC_ENABLE_COREINT)
+		mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0),
+			   mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
+			   | MPIC_GREG_GCONF_COREINT);
+
 	if (flags & MPIC_ENABLE_MCK)
 		mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0),
 			   mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0))
@@ -1525,6 +1531,34 @@ unsigned int mpic_get_irq(void)
 	return mpic_get_one_irq(mpic);
 }
 
+unsigned int mpic_get_coreint_irq(void)
+{
+#ifdef CONFIG_BOOKE
+	struct mpic *mpic = mpic_primary;
+	u32 src;
+
+	BUG_ON(mpic == NULL);
+
+	src = mfspr(SPRN_EPR);
+
+	if (unlikely(src == mpic->spurious_vec)) {
+		if (mpic->flags & MPIC_SPV_EOI)
+			mpic_eoi(mpic);
+		return NO_IRQ;
+	}
+	if (unlikely(mpic->protected && test_bit(src, mpic->protected))) {
+		if (printk_ratelimit())
+			printk(KERN_WARNING "%s: Got protected source %d !\n",
+			       mpic->name, (int)src);
+		return NO_IRQ;
+	}
+
+	return irq_linear_revmap(mpic->irqhost, src);
+#else
+	return NO_IRQ;
+#endif
+}
+
 unsigned int mpic_get_mcirq(void)
 {
 	struct mpic *mpic = mpic_primary;

drivers/serial/cpm_uart/cpm_uart_core.c

@@ -1106,6 +1106,10 @@ static int cpm_uart_init_port(struct device_node *np,
 	for (i = 0; i < NUM_GPIOS; i++)
 		pinfo->gpios[i] = of_get_gpio(np, i);
 
+#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
+	udbg_putc = NULL;
+#endif
+
 	return cpm_uart_request_port(&pinfo->port);
 
 out_pram:
@@ -1255,10 +1259,6 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 			baud = 9600;
 	}
 
-#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
-	udbg_putc = NULL;
-#endif
-
 	if (IS_SMC(pinfo)) {
 		out_be16(&pinfo->smcup->smc_brkcr, 0);
 		cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
@@ -1339,13 +1339,13 @@ static int __devinit cpm_uart_probe(struct of_device *ofdev,
 
 	dev_set_drvdata(&ofdev->dev, pinfo);
 
+	/* initialize the device pointer for the port */
+	pinfo->port.dev = &ofdev->dev;
+
 	ret = cpm_uart_init_port(ofdev->node, pinfo);
 	if (ret)
 		return ret;
 
-	/* initialize the device pointer for the port */
-	pinfo->port.dev = &ofdev->dev;
-
 	return uart_add_one_port(&cpm_reg, &pinfo->port);
 }
 

drivers/serial/pmac_zilog.c

@@ -1538,6 +1538,21 @@ no_dma:
 	uap->port.type = PORT_PMAC_ZILOG;
 	uap->port.flags = 0;
 
+	/*
+	 * Fixup for the port on Gatwick for which the device-tree has
+	 * missing interrupts. Normally, the macio_dev would contain
+	 * fixed up interrupt info, but we use the device-tree directly
+	 * here due to early probing so we need the fixup too.
+	 */
+	if (uap->port.irq == NO_IRQ &&
+	    np->parent && np->parent->parent &&
+	    of_device_is_compatible(np->parent->parent, "gatwick")) {
+		/* IRQs on gatwick are offset by 64 */
+		uap->port.irq = irq_create_mapping(NULL, 64 + 15);
+		uap->tx_dma_irq = irq_create_mapping(NULL, 64 + 4);
+		uap->rx_dma_irq = irq_create_mapping(NULL, 64 + 5);
+	}
+
 	/* Setup some valid baud rate information in the register
 	 * shadows so we don't write crap there before baud rate is
 	 * first initialized.

drivers/video/fsl-diu-fb.c

@@ -1352,14 +1352,15 @@ static int fsl_diu_resume(struct of_device *ofdev)
 #endif				/* CONFIG_PM */
 
 /* Align to 64-bit(8-byte), 32-byte, etc. */
-static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
+static int allocate_buf(struct device *dev, struct diu_addr *buf, u32 size,
+			u32 bytes_align)
 {
 	u32 offset, ssize;
 	u32 mask;
 	dma_addr_t paddr = 0;
 
 	ssize = size + bytes_align;
-	buf->vaddr = dma_alloc_coherent(NULL, ssize, &paddr, GFP_DMA |
+	buf->vaddr = dma_alloc_coherent(dev, ssize, &paddr, GFP_DMA |
 							     __GFP_ZERO);
 	if (!buf->vaddr)
 		return -ENOMEM;
@@ -1376,9 +1377,10 @@ static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
 	return 0;
 }
 
-static void free_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
+static void free_buf(struct device *dev, struct diu_addr *buf, u32 size,
+		     u32 bytes_align)
 {
-	dma_free_coherent(NULL, size + bytes_align,
+	dma_free_coherent(dev, size + bytes_align,
 				buf->vaddr, (buf->paddr - buf->offset));
 	return;
 }
@@ -1476,17 +1478,19 @@ static int __devinit fsl_diu_probe(struct of_device *ofdev,
 	machine_data->monitor_port = monitor_port;
 
 	/* Area descriptor memory pool aligns to 64-bit boundary */
-	if (allocate_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8))
+	if (allocate_buf(&ofdev->dev, &pool.ad,
+			 sizeof(struct diu_ad) * FSL_AOI_NUM, 8))
 		return -ENOMEM;
 
 	/* Get memory for Gamma Table  - 32-byte aligned memory */
-	if (allocate_buf(&pool.gamma, 768, 32)) {
+	if (allocate_buf(&ofdev->dev, &pool.gamma, 768, 32)) {
 		ret = -ENOMEM;
 		goto error;
 	}
 
 	/* For performance, cursor bitmap buffer aligns to 32-byte boundary */
-	if (allocate_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32)) {
+	if (allocate_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
+			 32)) {
 		ret = -ENOMEM;
 		goto error;
 	}
@@ -1554,11 +1558,13 @@ error:
 		i > 0; i--)
 		uninstall_fb(machine_data->fsl_diu_info[i - 1]);
 	if (pool.ad.vaddr)
-		free_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
+		free_buf(&ofdev->dev, &pool.ad,
+			 sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
 	if (pool.gamma.vaddr)
-		free_buf(&pool.gamma, 768, 32);
+		free_buf(&ofdev->dev, &pool.gamma, 768, 32);
 	if (pool.cursor.vaddr)
-		free_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32);
+		free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
+			 32);
 	if (machine_data->dummy_aoi_virt)
 		fsl_diu_free(machine_data->dummy_aoi_virt, 64);
 	iounmap(dr.diu_reg);
@@ -1584,11 +1590,13 @@ static int fsl_diu_remove(struct of_device *ofdev)
 	for (i = ARRAY_SIZE(machine_data->fsl_diu_info); i > 0; i--)
 		uninstall_fb(machine_data->fsl_diu_info[i - 1]);
 	if (pool.ad.vaddr)
-		free_buf(&pool.ad, sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
+		free_buf(&ofdev->dev, &pool.ad,
+			 sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
 	if (pool.gamma.vaddr)
-		free_buf(&pool.gamma, 768, 32);
+		free_buf(&ofdev->dev, &pool.gamma, 768, 32);
 	if (pool.cursor.vaddr)
-		free_buf(&pool.cursor, MAX_CURS * MAX_CURS * 2, 32);
+		free_buf(&ofdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
+			 32);
 	if (machine_data->dummy_aoi_virt)
 		fsl_diu_free(machine_data->dummy_aoi_virt, 64);
 	iounmap(dr.diu_reg);

drivers/watchdog/wdrtas.c

@@ -106,6 +106,8 @@ static int wdrtas_set_interval(int interval)
 	return result;
 }
 
+#define WDRTAS_SP_SPI_LEN 4
+
 /**
  * wdrtas_get_interval - returns the current watchdog interval
  * @fallback_value: value (in seconds) to use, if the RTAS call fails
@@ -119,10 +121,17 @@ static int wdrtas_set_interval(int interval)
 static int wdrtas_get_interval(int fallback_value)
 {
 	long result;
-	char value[4];
+	char value[WDRTAS_SP_SPI_LEN];
 
+	spin_lock(&rtas_data_buf_lock);
+	memset(rtas_data_buf, 0, WDRTAS_SP_SPI_LEN);
 	result = rtas_call(wdrtas_token_get_sp, 3, 1, NULL,
-			   WDRTAS_SP_SPI, (void *)__pa(&value), 4);
+			   WDRTAS_SP_SPI, __pa(rtas_data_buf),
+			   WDRTAS_SP_SPI_LEN);
+
+	memcpy(value, rtas_data_buf, WDRTAS_SP_SPI_LEN);
+	spin_unlock(&rtas_data_buf_lock);
+
 	if (value[0] != 0 || value[1] != 2 || value[3] != 0 || result < 0) {
 		printk(KERN_WARNING "wdrtas: could not get sp_spi watchdog "
 		       "timeout (%li). Continuing\n", result);

include/linux/fsl_devices.h

@@ -18,7 +18,6 @@
 #define _FSL_DEVICE_H_
 
 #include <linux/types.h>
-#include <linux/phy.h>
 
 /*
  * Some conventions on how we handle peripherals on Freescale chips
@@ -44,27 +43,6 @@
  *
  */
 
-struct gianfar_platform_data {
-	/* device specific information */
-	u32	device_flags;
-	char	bus_id[BUS_ID_SIZE];
-	phy_interface_t interface;
-};
-
-struct gianfar_mdio_data {
-	/* board specific information */
-	int	irq[32];
-};
-
-/* Flags in gianfar_platform_data */
-#define FSL_GIANFAR_BRD_HAS_PHY_INTR	0x00000001 /* set or use a timer */
-#define FSL_GIANFAR_BRD_IS_REDUCED	0x00000002 /* Set if RGMII, RMII */
-
-struct fsl_i2c_platform_data {
-	/* device specific information */
-	u32	device_flags;
-};
-
 /* Flags related to I2C device features */
 #define FSL_I2C_DEV_SEPARATE_DFSRR	0x00000001
 #define FSL_I2C_DEV_CLOCK_5200		0x00000002