[SCSI] qla2xxx: Add loopback IDC-TIME-EXTEND aen handling support.

Earlier IDC-TIME-EXTEND aen was a nop and ignored by driver.
We now have to handle the aen so that other protocol drivers can use time
extension during some loopback operations.

Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla2xxx/qla_bsg.c

@@ -627,6 +627,7 @@ qla81xx_set_loopback_mode(scsi_qla_host_t *vha, uint16_t *config,
 {
 	int ret = 0;
 	int rval = 0;
+	unsigned long rem_tmo = 0, current_tmo = 0;
 	struct qla_hw_data *ha = vha->hw;
 
 	if (!IS_QLA81XX(ha) && !IS_QLA8031(ha) && !IS_QLA8044(ha))
@@ -652,8 +653,19 @@ qla81xx_set_loopback_mode(scsi_qla_host_t *vha, uint16_t *config,
 	}
 
 	/* Wait for DCBX complete event */
-	if (!wait_for_completion_timeout(&ha->dcbx_comp,
-	    (DCBX_COMP_TIMEOUT * HZ))) {
+	current_tmo = DCBX_COMP_TIMEOUT * HZ;
+	while (1) {
+		rem_tmo = wait_for_completion_timeout(&ha->dcbx_comp,
+		    current_tmo);
+		if (!ha->idc_extend_tmo || rem_tmo) {
+			ha->idc_extend_tmo = 0;
+			break;
+		}
+		current_tmo = ha->idc_extend_tmo * HZ;
+		ha->idc_extend_tmo = 0;
+	}
+
+	if (!rem_tmo) {
 		ql_dbg(ql_dbg_user, vha, 0x7022,
 		    "DCBX completion not received.\n");
 		ret = qla81xx_reset_loopback_mode(vha, new_config, 0, 0);
@@ -678,6 +690,7 @@ qla81xx_set_loopback_mode(scsi_qla_host_t *vha, uint16_t *config,
 	}
 
 	ha->notify_dcbx_comp = 0;
+	ha->idc_extend_tmo = 0;
 
 done_set_internal:
 	return rval;

drivers/scsi/qla2xxx/qla_dbg.c

@@ -26,7 +26,7 @@
  * |                              |                    | 0x3036,0x3038  |
  * |                              |                    | 0x303a		|
  * | DPC Thread                   |       0x4022       | 0x4002,0x4013  |
- * | Async Events                 |       0x5086       | 0x502b-0x502f  |
+ * | Async Events                 |       0x5087       | 0x502b-0x502f  |
  * |                              |                    | 0x5047,0x5052  |
  * |                              |                    | 0x5040,0x5075  |
  * |                              |                    | 0x503d,0x5044  |

drivers/scsi/qla2xxx/qla_def.h

@@ -3292,6 +3292,7 @@ struct qla_hw_data {
 
 	/* QLA83XX IDC specific fields */
 	uint32_t	idc_audit_ts;
+	uint32_t	idc_extend_tmo;
 
 	/* DPC low-priority workqueue */
 	struct workqueue_struct *dpc_lp_wq;

drivers/scsi/qla2xxx/qla_isr.c

@@ -282,25 +282,38 @@ qla81xx_idc_event(scsi_qla_host_t *vha, uint16_t aen, uint16_t descr)
 	    "%04x %04x %04x %04x %04x %04x %04x.\n",
 	    event[aen & 0xff], mb[0], mb[1], mb[2], mb[3],
 	    mb[4], mb[5], mb[6]);
-	if ((aen == MBA_IDC_COMPLETE && mb[1] >> 15)) {
-		vha->hw->flags.idc_compl_status = 1;
-		if (vha->hw->notify_dcbx_comp)
-			complete(&vha->hw->dcbx_comp);
+	switch (aen) {
+	/* Handle IDC Error completion case. */
+	case MBA_IDC_COMPLETE:
+		if (mb[1] >> 15) {
+			vha->hw->flags.idc_compl_status = 1;
+			if (vha->hw->notify_dcbx_comp)
+				complete(&vha->hw->dcbx_comp);
+		}
+		break;
+
+	case MBA_IDC_NOTIFY:
+		/* Acknowledgement needed? [Notify && non-zero timeout]. */
+		timeout = (descr >> 8) & 0xf;
+		ql_dbg(ql_dbg_async, vha, 0x5022,
+		    "%lu Inter-Driver Communication %s -- ACK timeout=%d.\n",
+		    vha->host_no, event[aen & 0xff], timeout);
+
+		if (!timeout)
+			return;
+		rval = qla2x00_post_idc_ack_work(vha, mb);
+		if (rval != QLA_SUCCESS)
+			ql_log(ql_log_warn, vha, 0x5023,
+			    "IDC failed to post ACK.\n");
+		break;
+	case MBA_IDC_TIME_EXT:
+		vha->hw->idc_extend_tmo = descr;
+		ql_dbg(ql_dbg_async, vha, 0x5087,
+		    "%lu Inter-Driver Communication %s -- "
+		    "Extend timeout by=%d.\n",
+		    vha->host_no, event[aen & 0xff], vha->hw->idc_extend_tmo);
+		break;
 	}
-
-	/* Acknowledgement needed? [Notify && non-zero timeout]. */
-	timeout = (descr >> 8) & 0xf;
-	if (aen != MBA_IDC_NOTIFY || !timeout)
-		return;
-
-	ql_dbg(ql_dbg_async, vha, 0x5022,
-	    "%lu Inter-Driver Communication %s -- ACK timeout=%d.\n",
-	    vha->host_no, event[aen & 0xff], timeout);
-
-	rval = qla2x00_post_idc_ack_work(vha, mb);
-	if (rval != QLA_SUCCESS)
-		ql_log(ql_log_warn, vha, 0x5023,
-		    "IDC failed to post ACK.\n");
 }
 
 #define LS_UNKNOWN	2