Merge branch 'pci/ctrl/imx6'
- Factor out ref clock disables to match enables (Bjorn Helgaas) - Collect clock enables in imx6_pcie_clk_enable() (Richard Zhu) - Propagate regulator and clock errors back to .host_init() caller (Richard Zhu) - Disable i.MX6QDL clock when disabling ref clocks (Richard Zhu) - Call host init function directly in resume instead of duplicating the code (Richard Zhu) - Turn off regulators when suspending (Richard Zhu) - Make link being down a non-fatal error so probe doesn't fail (Richard Zhu) - Start link in resume only if it was up before suspend to reduce resume time (Richard Zhu) - Move PHY init and power-on out of clock- and reset-related functions (Richard Zhu) - Rework suspend callback to be more symmetric with resume (Richard Zhu) - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu) - Allow speeds faster than Gen2 (Richard Zhu) * pci/ctrl/imx6: PCI: imx6: Support more than Gen2 speed link mode PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers PCI: imx6: Reformat suspend callback to keep symmetric with resume PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier PCI: imx6: Disable clocks in reverse order of enable PCI: imx6: Do not hide PHY driver callbacks and refine the error handling PCI: imx6: Reduce resume time by only starting link if it was up before suspend PCI: imx6: Mark the link down as non-fatal error PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset() PCI: imx6: Turn off regulator when system is in suspend mode PCI: imx6: Call host init function directly in resume PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks PCI: imx6: Propagate .host_init() errors to caller PCI: imx6: Collect clock enables in imx6_pcie_clk_enable() PCI: imx6: Factor out ref clock disable to match enable PCI: imx6: Move imx6_pcie_clk_disable() earlier PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier PCI: imx6: Move PHY management functions together PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
This commit is contained in:
Коммит
468276d4ea
|
@ -67,6 +67,7 @@ struct imx6_pcie {
|
||||||
struct dw_pcie *pci;
|
struct dw_pcie *pci;
|
||||||
int reset_gpio;
|
int reset_gpio;
|
||||||
bool gpio_active_high;
|
bool gpio_active_high;
|
||||||
|
bool link_is_up;
|
||||||
struct clk *pcie_bus;
|
struct clk *pcie_bus;
|
||||||
struct clk *pcie_phy;
|
struct clk *pcie_phy;
|
||||||
struct clk *pcie_inbound_axi;
|
struct clk *pcie_inbound_axi;
|
||||||
|
@ -146,6 +147,31 @@ struct imx6_pcie {
|
||||||
#define PHY_RX_OVRD_IN_LO_RX_DATA_EN BIT(5)
|
#define PHY_RX_OVRD_IN_LO_RX_DATA_EN BIT(5)
|
||||||
#define PHY_RX_OVRD_IN_LO_RX_PLL_EN BIT(3)
|
#define PHY_RX_OVRD_IN_LO_RX_PLL_EN BIT(3)
|
||||||
|
|
||||||
|
static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
|
||||||
|
{
|
||||||
|
WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ &&
|
||||||
|
imx6_pcie->drvdata->variant != IMX8MM);
|
||||||
|
return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
|
||||||
|
{
|
||||||
|
unsigned int mask, val;
|
||||||
|
|
||||||
|
if (imx6_pcie->drvdata->variant == IMX8MQ &&
|
||||||
|
imx6_pcie->controller_id == 1) {
|
||||||
|
mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
|
||||||
|
val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
|
||||||
|
PCI_EXP_TYPE_ROOT_PORT);
|
||||||
|
} else {
|
||||||
|
mask = IMX6Q_GPR12_DEVICE_TYPE;
|
||||||
|
val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE,
|
||||||
|
PCI_EXP_TYPE_ROOT_PORT);
|
||||||
|
}
|
||||||
|
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
|
||||||
|
}
|
||||||
|
|
||||||
static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
|
static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
|
||||||
{
|
{
|
||||||
struct dw_pcie *pci = imx6_pcie->pci;
|
struct dw_pcie *pci = imx6_pcie->pci;
|
||||||
|
@ -271,6 +297,134 @@ static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
|
||||||
|
{
|
||||||
|
switch (imx6_pcie->drvdata->variant) {
|
||||||
|
case IMX8MM:
|
||||||
|
/*
|
||||||
|
* The PHY initialization had been done in the PHY
|
||||||
|
* driver, break here directly.
|
||||||
|
*/
|
||||||
|
break;
|
||||||
|
case IMX8MQ:
|
||||||
|
/*
|
||||||
|
* TODO: Currently this code assumes external
|
||||||
|
* oscillator is being used
|
||||||
|
*/
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr,
|
||||||
|
imx6_pcie_grp_offset(imx6_pcie),
|
||||||
|
IMX8MQ_GPR_PCIE_REF_USE_PAD,
|
||||||
|
IMX8MQ_GPR_PCIE_REF_USE_PAD);
|
||||||
|
/*
|
||||||
|
* Regarding the datasheet, the PCIE_VPH is suggested
|
||||||
|
* to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the
|
||||||
|
* VREG_BYPASS should be cleared to zero.
|
||||||
|
*/
|
||||||
|
if (imx6_pcie->vph &&
|
||||||
|
regulator_get_voltage(imx6_pcie->vph) > 3000000)
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr,
|
||||||
|
imx6_pcie_grp_offset(imx6_pcie),
|
||||||
|
IMX8MQ_GPR_PCIE_VREG_BYPASS,
|
||||||
|
0);
|
||||||
|
break;
|
||||||
|
case IMX7D:
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
||||||
|
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
|
||||||
|
break;
|
||||||
|
case IMX6SX:
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
||||||
|
IMX6SX_GPR12_PCIE_RX_EQ_MASK,
|
||||||
|
IMX6SX_GPR12_PCIE_RX_EQ_2);
|
||||||
|
fallthrough;
|
||||||
|
default:
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
||||||
|
IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
|
||||||
|
|
||||||
|
/* configure constant input signal to the pcie ctrl and phy */
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
||||||
|
IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
|
||||||
|
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
||||||
|
IMX6Q_GPR8_TX_DEEMPH_GEN1,
|
||||||
|
imx6_pcie->tx_deemph_gen1 << 0);
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
||||||
|
IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
|
||||||
|
imx6_pcie->tx_deemph_gen2_3p5db << 6);
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
||||||
|
IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
|
||||||
|
imx6_pcie->tx_deemph_gen2_6db << 12);
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
||||||
|
IMX6Q_GPR8_TX_SWING_FULL,
|
||||||
|
imx6_pcie->tx_swing_full << 18);
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
||||||
|
IMX6Q_GPR8_TX_SWING_LOW,
|
||||||
|
imx6_pcie->tx_swing_low << 25);
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
imx6_pcie_configure_type(imx6_pcie);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
|
||||||
|
{
|
||||||
|
u32 val;
|
||||||
|
struct device *dev = imx6_pcie->pci->dev;
|
||||||
|
|
||||||
|
if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr,
|
||||||
|
IOMUXC_GPR22, val,
|
||||||
|
val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED,
|
||||||
|
PHY_PLL_LOCK_WAIT_USLEEP_MAX,
|
||||||
|
PHY_PLL_LOCK_WAIT_TIMEOUT))
|
||||||
|
dev_err(dev, "PCIe PLL lock timeout\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
|
||||||
|
{
|
||||||
|
unsigned long phy_rate = clk_get_rate(imx6_pcie->pcie_phy);
|
||||||
|
int mult, div;
|
||||||
|
u16 val;
|
||||||
|
|
||||||
|
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY))
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
switch (phy_rate) {
|
||||||
|
case 125000000:
|
||||||
|
/*
|
||||||
|
* The default settings of the MPLL are for a 125MHz input
|
||||||
|
* clock, so no need to reconfigure anything in that case.
|
||||||
|
*/
|
||||||
|
return 0;
|
||||||
|
case 100000000:
|
||||||
|
mult = 25;
|
||||||
|
div = 0;
|
||||||
|
break;
|
||||||
|
case 200000000:
|
||||||
|
mult = 25;
|
||||||
|
div = 1;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
dev_err(imx6_pcie->pci->dev,
|
||||||
|
"Unsupported PHY reference clock rate %lu\n", phy_rate);
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
pcie_phy_read(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, &val);
|
||||||
|
val &= ~(PCIE_PHY_MPLL_MULTIPLIER_MASK <<
|
||||||
|
PCIE_PHY_MPLL_MULTIPLIER_SHIFT);
|
||||||
|
val |= mult << PCIE_PHY_MPLL_MULTIPLIER_SHIFT;
|
||||||
|
val |= PCIE_PHY_MPLL_MULTIPLIER_OVRD;
|
||||||
|
pcie_phy_write(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, val);
|
||||||
|
|
||||||
|
pcie_phy_read(imx6_pcie, PCIE_PHY_ATEOVRD, &val);
|
||||||
|
val &= ~(PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK <<
|
||||||
|
PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT);
|
||||||
|
val |= div << PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT;
|
||||||
|
val |= PCIE_PHY_ATEOVRD_EN;
|
||||||
|
pcie_phy_write(imx6_pcie, PCIE_PHY_ATEOVRD, val);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
|
static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
|
||||||
{
|
{
|
||||||
u16 tmp;
|
u16 tmp;
|
||||||
|
@ -367,61 +521,6 @@ static int imx6_pcie_attach_pd(struct device *dev)
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
|
|
||||||
{
|
|
||||||
struct device *dev = imx6_pcie->pci->dev;
|
|
||||||
|
|
||||||
switch (imx6_pcie->drvdata->variant) {
|
|
||||||
case IMX7D:
|
|
||||||
case IMX8MQ:
|
|
||||||
reset_control_assert(imx6_pcie->pciephy_reset);
|
|
||||||
fallthrough;
|
|
||||||
case IMX8MM:
|
|
||||||
reset_control_assert(imx6_pcie->apps_reset);
|
|
||||||
break;
|
|
||||||
case IMX6SX:
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
||||||
IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
|
|
||||||
IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
|
|
||||||
/* Force PCIe PHY reset */
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
|
|
||||||
IMX6SX_GPR5_PCIE_BTNRST_RESET,
|
|
||||||
IMX6SX_GPR5_PCIE_BTNRST_RESET);
|
|
||||||
break;
|
|
||||||
case IMX6QP:
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
||||||
IMX6Q_GPR1_PCIE_SW_RST,
|
|
||||||
IMX6Q_GPR1_PCIE_SW_RST);
|
|
||||||
break;
|
|
||||||
case IMX6Q:
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
||||||
IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
|
||||||
IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
|
|
||||||
int ret = regulator_disable(imx6_pcie->vpcie);
|
|
||||||
|
|
||||||
if (ret)
|
|
||||||
dev_err(dev, "failed to disable vpcie regulator: %d\n",
|
|
||||||
ret);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Some boards don't have PCIe reset GPIO. */
|
|
||||||
if (gpio_is_valid(imx6_pcie->reset_gpio))
|
|
||||||
gpio_set_value_cansleep(imx6_pcie->reset_gpio,
|
|
||||||
imx6_pcie->gpio_active_high);
|
|
||||||
}
|
|
||||||
|
|
||||||
static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
|
|
||||||
{
|
|
||||||
WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ &&
|
|
||||||
imx6_pcie->drvdata->variant != IMX8MM);
|
|
||||||
return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
|
|
||||||
}
|
|
||||||
|
|
||||||
static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
|
static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
|
||||||
{
|
{
|
||||||
struct dw_pcie *pci = imx6_pcie->pci;
|
struct dw_pcie *pci = imx6_pcie->pci;
|
||||||
|
@ -482,38 +581,44 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
|
||||||
return ret;
|
return ret;
|
||||||
}
|
}
|
||||||
|
|
||||||
static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
|
static void imx6_pcie_disable_ref_clk(struct imx6_pcie *imx6_pcie)
|
||||||
{
|
{
|
||||||
u32 val;
|
switch (imx6_pcie->drvdata->variant) {
|
||||||
struct device *dev = imx6_pcie->pci->dev;
|
case IMX6SX:
|
||||||
|
clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
|
||||||
if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr,
|
break;
|
||||||
IOMUXC_GPR22, val,
|
case IMX6QP:
|
||||||
val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED,
|
case IMX6Q:
|
||||||
PHY_PLL_LOCK_WAIT_USLEEP_MAX,
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
||||||
PHY_PLL_LOCK_WAIT_TIMEOUT))
|
IMX6Q_GPR1_PCIE_REF_CLK_EN, 0);
|
||||||
dev_err(dev, "PCIe PLL lock timeout\n");
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
||||||
|
IMX6Q_GPR1_PCIE_TEST_PD,
|
||||||
|
IMX6Q_GPR1_PCIE_TEST_PD);
|
||||||
|
break;
|
||||||
|
case IMX7D:
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
||||||
|
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
|
||||||
|
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
|
||||||
|
break;
|
||||||
|
case IMX8MM:
|
||||||
|
case IMX8MQ:
|
||||||
|
clk_disable_unprepare(imx6_pcie->pcie_aux);
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
break;
|
||||||
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
|
static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie)
|
||||||
{
|
{
|
||||||
struct dw_pcie *pci = imx6_pcie->pci;
|
struct dw_pcie *pci = imx6_pcie->pci;
|
||||||
struct device *dev = pci->dev;
|
struct device *dev = pci->dev;
|
||||||
int ret;
|
int ret;
|
||||||
|
|
||||||
if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
|
|
||||||
ret = regulator_enable(imx6_pcie->vpcie);
|
|
||||||
if (ret) {
|
|
||||||
dev_err(dev, "failed to enable vpcie regulator: %d\n",
|
|
||||||
ret);
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
ret = clk_prepare_enable(imx6_pcie->pcie_phy);
|
ret = clk_prepare_enable(imx6_pcie->pcie_phy);
|
||||||
if (ret) {
|
if (ret) {
|
||||||
dev_err(dev, "unable to enable pcie_phy clock\n");
|
dev_err(dev, "unable to enable pcie_phy clock\n");
|
||||||
goto err_pcie_phy;
|
return ret;
|
||||||
}
|
}
|
||||||
|
|
||||||
ret = clk_prepare_enable(imx6_pcie->pcie_bus);
|
ret = clk_prepare_enable(imx6_pcie->pcie_bus);
|
||||||
|
@ -534,25 +639,75 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
|
||||||
goto err_ref_clk;
|
goto err_ref_clk;
|
||||||
}
|
}
|
||||||
|
|
||||||
switch (imx6_pcie->drvdata->variant) {
|
|
||||||
case IMX8MM:
|
|
||||||
if (phy_power_on(imx6_pcie->phy))
|
|
||||||
dev_err(dev, "unable to power on PHY\n");
|
|
||||||
break;
|
|
||||||
default:
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
/* allow the clocks to stabilize */
|
/* allow the clocks to stabilize */
|
||||||
usleep_range(200, 500);
|
usleep_range(200, 500);
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
err_ref_clk:
|
||||||
|
clk_disable_unprepare(imx6_pcie->pcie);
|
||||||
|
err_pcie:
|
||||||
|
clk_disable_unprepare(imx6_pcie->pcie_bus);
|
||||||
|
err_pcie_bus:
|
||||||
|
clk_disable_unprepare(imx6_pcie->pcie_phy);
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
|
||||||
|
{
|
||||||
|
imx6_pcie_disable_ref_clk(imx6_pcie);
|
||||||
|
clk_disable_unprepare(imx6_pcie->pcie);
|
||||||
|
clk_disable_unprepare(imx6_pcie->pcie_bus);
|
||||||
|
clk_disable_unprepare(imx6_pcie->pcie_phy);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
|
||||||
|
{
|
||||||
|
switch (imx6_pcie->drvdata->variant) {
|
||||||
|
case IMX7D:
|
||||||
|
case IMX8MQ:
|
||||||
|
reset_control_assert(imx6_pcie->pciephy_reset);
|
||||||
|
fallthrough;
|
||||||
|
case IMX8MM:
|
||||||
|
reset_control_assert(imx6_pcie->apps_reset);
|
||||||
|
break;
|
||||||
|
case IMX6SX:
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
||||||
|
IMX6SX_GPR12_PCIE_TEST_POWERDOWN,
|
||||||
|
IMX6SX_GPR12_PCIE_TEST_POWERDOWN);
|
||||||
|
/* Force PCIe PHY reset */
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5,
|
||||||
|
IMX6SX_GPR5_PCIE_BTNRST_RESET,
|
||||||
|
IMX6SX_GPR5_PCIE_BTNRST_RESET);
|
||||||
|
break;
|
||||||
|
case IMX6QP:
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
||||||
|
IMX6Q_GPR1_PCIE_SW_RST,
|
||||||
|
IMX6Q_GPR1_PCIE_SW_RST);
|
||||||
|
break;
|
||||||
|
case IMX6Q:
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
||||||
|
IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
|
||||||
|
IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Some boards don't have PCIe reset GPIO. */
|
||||||
|
if (gpio_is_valid(imx6_pcie->reset_gpio))
|
||||||
|
gpio_set_value_cansleep(imx6_pcie->reset_gpio,
|
||||||
|
imx6_pcie->gpio_active_high);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
|
||||||
|
{
|
||||||
|
struct dw_pcie *pci = imx6_pcie->pci;
|
||||||
|
struct device *dev = pci->dev;
|
||||||
|
|
||||||
switch (imx6_pcie->drvdata->variant) {
|
switch (imx6_pcie->drvdata->variant) {
|
||||||
case IMX8MQ:
|
case IMX8MQ:
|
||||||
reset_control_deassert(imx6_pcie->pciephy_reset);
|
reset_control_deassert(imx6_pcie->pciephy_reset);
|
||||||
break;
|
break;
|
||||||
case IMX8MM:
|
|
||||||
if (phy_init(imx6_pcie->phy))
|
|
||||||
dev_err(dev, "waiting for phy ready timeout!\n");
|
|
||||||
break;
|
|
||||||
case IMX7D:
|
case IMX7D:
|
||||||
reset_control_deassert(imx6_pcie->pciephy_reset);
|
reset_control_deassert(imx6_pcie->pciephy_reset);
|
||||||
|
|
||||||
|
@ -588,6 +743,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
|
||||||
usleep_range(200, 500);
|
usleep_range(200, 500);
|
||||||
break;
|
break;
|
||||||
case IMX6Q: /* Nothing to do */
|
case IMX6Q: /* Nothing to do */
|
||||||
|
case IMX8MM:
|
||||||
break;
|
break;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
@ -600,153 +756,6 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
|
||||||
msleep(100);
|
msleep(100);
|
||||||
}
|
}
|
||||||
|
|
||||||
return;
|
|
||||||
|
|
||||||
err_ref_clk:
|
|
||||||
clk_disable_unprepare(imx6_pcie->pcie);
|
|
||||||
err_pcie:
|
|
||||||
clk_disable_unprepare(imx6_pcie->pcie_bus);
|
|
||||||
err_pcie_bus:
|
|
||||||
clk_disable_unprepare(imx6_pcie->pcie_phy);
|
|
||||||
err_pcie_phy:
|
|
||||||
if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
|
|
||||||
ret = regulator_disable(imx6_pcie->vpcie);
|
|
||||||
if (ret)
|
|
||||||
dev_err(dev, "failed to disable vpcie regulator: %d\n",
|
|
||||||
ret);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
|
|
||||||
{
|
|
||||||
unsigned int mask, val;
|
|
||||||
|
|
||||||
if (imx6_pcie->drvdata->variant == IMX8MQ &&
|
|
||||||
imx6_pcie->controller_id == 1) {
|
|
||||||
mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE;
|
|
||||||
val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
|
|
||||||
PCI_EXP_TYPE_ROOT_PORT);
|
|
||||||
} else {
|
|
||||||
mask = IMX6Q_GPR12_DEVICE_TYPE;
|
|
||||||
val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE,
|
|
||||||
PCI_EXP_TYPE_ROOT_PORT);
|
|
||||||
}
|
|
||||||
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
|
|
||||||
{
|
|
||||||
switch (imx6_pcie->drvdata->variant) {
|
|
||||||
case IMX8MM:
|
|
||||||
/*
|
|
||||||
* The PHY initialization had been done in the PHY
|
|
||||||
* driver, break here directly.
|
|
||||||
*/
|
|
||||||
break;
|
|
||||||
case IMX8MQ:
|
|
||||||
/*
|
|
||||||
* TODO: Currently this code assumes external
|
|
||||||
* oscillator is being used
|
|
||||||
*/
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr,
|
|
||||||
imx6_pcie_grp_offset(imx6_pcie),
|
|
||||||
IMX8MQ_GPR_PCIE_REF_USE_PAD,
|
|
||||||
IMX8MQ_GPR_PCIE_REF_USE_PAD);
|
|
||||||
/*
|
|
||||||
* Regarding the datasheet, the PCIE_VPH is suggested
|
|
||||||
* to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the
|
|
||||||
* VREG_BYPASS should be cleared to zero.
|
|
||||||
*/
|
|
||||||
if (imx6_pcie->vph &&
|
|
||||||
regulator_get_voltage(imx6_pcie->vph) > 3000000)
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr,
|
|
||||||
imx6_pcie_grp_offset(imx6_pcie),
|
|
||||||
IMX8MQ_GPR_PCIE_VREG_BYPASS,
|
|
||||||
0);
|
|
||||||
break;
|
|
||||||
case IMX7D:
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
||||||
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
|
|
||||||
break;
|
|
||||||
case IMX6SX:
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
||||||
IMX6SX_GPR12_PCIE_RX_EQ_MASK,
|
|
||||||
IMX6SX_GPR12_PCIE_RX_EQ_2);
|
|
||||||
fallthrough;
|
|
||||||
default:
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
||||||
IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
|
|
||||||
|
|
||||||
/* configure constant input signal to the pcie ctrl and phy */
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
||||||
IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
|
|
||||||
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
||||||
IMX6Q_GPR8_TX_DEEMPH_GEN1,
|
|
||||||
imx6_pcie->tx_deemph_gen1 << 0);
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
||||||
IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
|
|
||||||
imx6_pcie->tx_deemph_gen2_3p5db << 6);
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
||||||
IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
|
|
||||||
imx6_pcie->tx_deemph_gen2_6db << 12);
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
||||||
IMX6Q_GPR8_TX_SWING_FULL,
|
|
||||||
imx6_pcie->tx_swing_full << 18);
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
|
|
||||||
IMX6Q_GPR8_TX_SWING_LOW,
|
|
||||||
imx6_pcie->tx_swing_low << 25);
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
|
|
||||||
imx6_pcie_configure_type(imx6_pcie);
|
|
||||||
}
|
|
||||||
|
|
||||||
static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
|
|
||||||
{
|
|
||||||
unsigned long phy_rate = clk_get_rate(imx6_pcie->pcie_phy);
|
|
||||||
int mult, div;
|
|
||||||
u16 val;
|
|
||||||
|
|
||||||
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY))
|
|
||||||
return 0;
|
|
||||||
|
|
||||||
switch (phy_rate) {
|
|
||||||
case 125000000:
|
|
||||||
/*
|
|
||||||
* The default settings of the MPLL are for a 125MHz input
|
|
||||||
* clock, so no need to reconfigure anything in that case.
|
|
||||||
*/
|
|
||||||
return 0;
|
|
||||||
case 100000000:
|
|
||||||
mult = 25;
|
|
||||||
div = 0;
|
|
||||||
break;
|
|
||||||
case 200000000:
|
|
||||||
mult = 25;
|
|
||||||
div = 1;
|
|
||||||
break;
|
|
||||||
default:
|
|
||||||
dev_err(imx6_pcie->pci->dev,
|
|
||||||
"Unsupported PHY reference clock rate %lu\n", phy_rate);
|
|
||||||
return -EINVAL;
|
|
||||||
}
|
|
||||||
|
|
||||||
pcie_phy_read(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, &val);
|
|
||||||
val &= ~(PCIE_PHY_MPLL_MULTIPLIER_MASK <<
|
|
||||||
PCIE_PHY_MPLL_MULTIPLIER_SHIFT);
|
|
||||||
val |= mult << PCIE_PHY_MPLL_MULTIPLIER_SHIFT;
|
|
||||||
val |= PCIE_PHY_MPLL_MULTIPLIER_OVRD;
|
|
||||||
pcie_phy_write(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, val);
|
|
||||||
|
|
||||||
pcie_phy_read(imx6_pcie, PCIE_PHY_ATEOVRD, &val);
|
|
||||||
val &= ~(PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK <<
|
|
||||||
PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT);
|
|
||||||
val |= div << PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT;
|
|
||||||
val |= PCIE_PHY_ATEOVRD_EN;
|
|
||||||
pcie_phy_write(imx6_pcie, PCIE_PHY_ATEOVRD, val);
|
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
@ -789,6 +798,25 @@ static void imx6_pcie_ltssm_enable(struct device *dev)
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
|
static void imx6_pcie_ltssm_disable(struct device *dev)
|
||||||
|
{
|
||||||
|
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
|
||||||
|
|
||||||
|
switch (imx6_pcie->drvdata->variant) {
|
||||||
|
case IMX6Q:
|
||||||
|
case IMX6SX:
|
||||||
|
case IMX6QP:
|
||||||
|
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
||||||
|
IMX6Q_GPR12_PCIE_CTL_2, 0);
|
||||||
|
break;
|
||||||
|
case IMX7D:
|
||||||
|
case IMX8MQ:
|
||||||
|
case IMX8MM:
|
||||||
|
reset_control_assert(imx6_pcie->apps_reset);
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
static int imx6_pcie_start_link(struct dw_pcie *pci)
|
static int imx6_pcie_start_link(struct dw_pcie *pci)
|
||||||
{
|
{
|
||||||
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
|
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
|
||||||
|
@ -802,21 +830,26 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
|
||||||
* started in Gen2 mode, there is a possibility the devices on the
|
* started in Gen2 mode, there is a possibility the devices on the
|
||||||
* bus will not be detected at all. This happens with PCIe switches.
|
* bus will not be detected at all. This happens with PCIe switches.
|
||||||
*/
|
*/
|
||||||
|
dw_pcie_dbi_ro_wr_en(pci);
|
||||||
tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
|
tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
|
||||||
tmp &= ~PCI_EXP_LNKCAP_SLS;
|
tmp &= ~PCI_EXP_LNKCAP_SLS;
|
||||||
tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
|
tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
|
||||||
dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
|
dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
|
||||||
|
dw_pcie_dbi_ro_wr_dis(pci);
|
||||||
|
|
||||||
/* Start LTSSM. */
|
/* Start LTSSM. */
|
||||||
imx6_pcie_ltssm_enable(dev);
|
imx6_pcie_ltssm_enable(dev);
|
||||||
|
|
||||||
dw_pcie_wait_for_link(pci);
|
ret = dw_pcie_wait_for_link(pci);
|
||||||
|
if (ret)
|
||||||
|
goto err_reset_phy;
|
||||||
|
|
||||||
if (pci->link_gen == 2) {
|
if (pci->link_gen > 1) {
|
||||||
/* Allow Gen2 mode after the link is up. */
|
/* Allow faster modes after the link is up */
|
||||||
|
dw_pcie_dbi_ro_wr_en(pci);
|
||||||
tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
|
tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
|
||||||
tmp &= ~PCI_EXP_LNKCAP_SLS;
|
tmp &= ~PCI_EXP_LNKCAP_SLS;
|
||||||
tmp |= PCI_EXP_LNKCAP_SLS_5_0GB;
|
tmp |= pci->link_gen;
|
||||||
dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
|
dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
|
||||||
|
|
||||||
/*
|
/*
|
||||||
|
@ -826,6 +859,7 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
|
||||||
tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
|
tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
|
||||||
tmp |= PORT_LOGIC_SPEED_CHANGE;
|
tmp |= PORT_LOGIC_SPEED_CHANGE;
|
||||||
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
|
dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
|
||||||
|
dw_pcie_dbi_ro_wr_dis(pci);
|
||||||
|
|
||||||
if (imx6_pcie->drvdata->flags &
|
if (imx6_pcie->drvdata->flags &
|
||||||
IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE) {
|
IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE) {
|
||||||
|
@ -846,34 +880,110 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
|
||||||
}
|
}
|
||||||
|
|
||||||
/* Make sure link training is finished as well! */
|
/* Make sure link training is finished as well! */
|
||||||
dw_pcie_wait_for_link(pci);
|
ret = dw_pcie_wait_for_link(pci);
|
||||||
|
if (ret)
|
||||||
|
goto err_reset_phy;
|
||||||
} else {
|
} else {
|
||||||
dev_info(dev, "Link: Gen2 disabled\n");
|
dev_info(dev, "Link: Only Gen1 is enabled\n");
|
||||||
}
|
}
|
||||||
|
|
||||||
|
imx6_pcie->link_is_up = true;
|
||||||
tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
|
tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
|
||||||
dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
|
dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
|
||||||
return 0;
|
return 0;
|
||||||
|
|
||||||
err_reset_phy:
|
err_reset_phy:
|
||||||
|
imx6_pcie->link_is_up = false;
|
||||||
dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
|
dev_dbg(dev, "PHY DEBUG_R0=0x%08x DEBUG_R1=0x%08x\n",
|
||||||
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
|
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
|
||||||
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
|
dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
|
||||||
imx6_pcie_reset_phy(imx6_pcie);
|
imx6_pcie_reset_phy(imx6_pcie);
|
||||||
return ret;
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void imx6_pcie_stop_link(struct dw_pcie *pci)
|
||||||
|
{
|
||||||
|
struct device *dev = pci->dev;
|
||||||
|
|
||||||
|
/* Turn off PCIe LTSSM */
|
||||||
|
imx6_pcie_ltssm_disable(dev);
|
||||||
}
|
}
|
||||||
|
|
||||||
static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
|
static int imx6_pcie_host_init(struct dw_pcie_rp *pp)
|
||||||
{
|
{
|
||||||
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
||||||
|
struct device *dev = pci->dev;
|
||||||
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
|
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
if (imx6_pcie->vpcie) {
|
||||||
|
ret = regulator_enable(imx6_pcie->vpcie);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "failed to enable vpcie regulator: %d\n",
|
||||||
|
ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
imx6_pcie_assert_core_reset(imx6_pcie);
|
imx6_pcie_assert_core_reset(imx6_pcie);
|
||||||
imx6_pcie_init_phy(imx6_pcie);
|
imx6_pcie_init_phy(imx6_pcie);
|
||||||
imx6_pcie_deassert_core_reset(imx6_pcie);
|
|
||||||
|
ret = imx6_pcie_clk_enable(imx6_pcie);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "unable to enable pcie clocks: %d\n", ret);
|
||||||
|
goto err_reg_disable;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (imx6_pcie->phy) {
|
||||||
|
ret = phy_power_on(imx6_pcie->phy);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "pcie PHY power up failed\n");
|
||||||
|
goto err_clk_disable;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = imx6_pcie_deassert_core_reset(imx6_pcie);
|
||||||
|
if (ret < 0) {
|
||||||
|
dev_err(dev, "pcie deassert core reset failed: %d\n", ret);
|
||||||
|
goto err_phy_off;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (imx6_pcie->phy) {
|
||||||
|
ret = phy_init(imx6_pcie->phy);
|
||||||
|
if (ret) {
|
||||||
|
dev_err(dev, "waiting for PHY ready timeout!\n");
|
||||||
|
goto err_phy_off;
|
||||||
|
}
|
||||||
|
}
|
||||||
imx6_setup_phy_mpll(imx6_pcie);
|
imx6_setup_phy_mpll(imx6_pcie);
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
|
|
||||||
|
err_phy_off:
|
||||||
|
if (imx6_pcie->phy)
|
||||||
|
phy_power_off(imx6_pcie->phy);
|
||||||
|
err_clk_disable:
|
||||||
|
imx6_pcie_clk_disable(imx6_pcie);
|
||||||
|
err_reg_disable:
|
||||||
|
if (imx6_pcie->vpcie)
|
||||||
|
regulator_disable(imx6_pcie->vpcie);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void imx6_pcie_host_exit(struct dw_pcie_rp *pp)
|
||||||
|
{
|
||||||
|
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
||||||
|
struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
|
||||||
|
|
||||||
|
if (imx6_pcie->phy) {
|
||||||
|
if (phy_power_off(imx6_pcie->phy))
|
||||||
|
dev_err(pci->dev, "unable to power off PHY\n");
|
||||||
|
phy_exit(imx6_pcie->phy);
|
||||||
|
}
|
||||||
|
imx6_pcie_clk_disable(imx6_pcie);
|
||||||
|
|
||||||
|
if (imx6_pcie->vpcie)
|
||||||
|
regulator_disable(imx6_pcie->vpcie);
|
||||||
}
|
}
|
||||||
|
|
||||||
static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
|
static const struct dw_pcie_host_ops imx6_pcie_host_ops = {
|
||||||
|
@ -884,26 +994,6 @@ static const struct dw_pcie_ops dw_pcie_ops = {
|
||||||
.start_link = imx6_pcie_start_link,
|
.start_link = imx6_pcie_start_link,
|
||||||
};
|
};
|
||||||
|
|
||||||
#ifdef CONFIG_PM_SLEEP
|
|
||||||
static void imx6_pcie_ltssm_disable(struct device *dev)
|
|
||||||
{
|
|
||||||
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
|
|
||||||
|
|
||||||
switch (imx6_pcie->drvdata->variant) {
|
|
||||||
case IMX6SX:
|
|
||||||
case IMX6QP:
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
||||||
IMX6Q_GPR12_PCIE_CTL_2, 0);
|
|
||||||
break;
|
|
||||||
case IMX7D:
|
|
||||||
case IMX8MM:
|
|
||||||
reset_control_assert(imx6_pcie->apps_reset);
|
|
||||||
break;
|
|
||||||
default:
|
|
||||||
dev_err(dev, "ltssm_disable not supported\n");
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
|
static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
|
||||||
{
|
{
|
||||||
struct device *dev = imx6_pcie->pci->dev;
|
struct device *dev = imx6_pcie->pci->dev;
|
||||||
|
@ -941,49 +1031,17 @@ pm_turnoff_sleep:
|
||||||
usleep_range(1000, 10000);
|
usleep_range(1000, 10000);
|
||||||
}
|
}
|
||||||
|
|
||||||
static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
|
|
||||||
{
|
|
||||||
clk_disable_unprepare(imx6_pcie->pcie);
|
|
||||||
clk_disable_unprepare(imx6_pcie->pcie_phy);
|
|
||||||
clk_disable_unprepare(imx6_pcie->pcie_bus);
|
|
||||||
|
|
||||||
switch (imx6_pcie->drvdata->variant) {
|
|
||||||
case IMX6SX:
|
|
||||||
clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
|
|
||||||
break;
|
|
||||||
case IMX7D:
|
|
||||||
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
|
|
||||||
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
|
|
||||||
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
|
|
||||||
break;
|
|
||||||
case IMX8MQ:
|
|
||||||
case IMX8MM:
|
|
||||||
clk_disable_unprepare(imx6_pcie->pcie_aux);
|
|
||||||
break;
|
|
||||||
default:
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static int imx6_pcie_suspend_noirq(struct device *dev)
|
static int imx6_pcie_suspend_noirq(struct device *dev)
|
||||||
{
|
{
|
||||||
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
|
struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev);
|
||||||
|
struct dw_pcie_rp *pp = &imx6_pcie->pci->pp;
|
||||||
|
|
||||||
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
|
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
|
||||||
return 0;
|
return 0;
|
||||||
|
|
||||||
imx6_pcie_pm_turnoff(imx6_pcie);
|
imx6_pcie_pm_turnoff(imx6_pcie);
|
||||||
imx6_pcie_ltssm_disable(dev);
|
imx6_pcie_stop_link(imx6_pcie->pci);
|
||||||
imx6_pcie_clk_disable(imx6_pcie);
|
imx6_pcie_host_exit(pp);
|
||||||
switch (imx6_pcie->drvdata->variant) {
|
|
||||||
case IMX8MM:
|
|
||||||
if (phy_power_off(imx6_pcie->phy))
|
|
||||||
dev_err(dev, "unable to power off PHY\n");
|
|
||||||
phy_exit(imx6_pcie->phy);
|
|
||||||
break;
|
|
||||||
default:
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
@ -997,22 +1055,20 @@ static int imx6_pcie_resume_noirq(struct device *dev)
|
||||||
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
|
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
|
||||||
return 0;
|
return 0;
|
||||||
|
|
||||||
imx6_pcie_assert_core_reset(imx6_pcie);
|
ret = imx6_pcie_host_init(pp);
|
||||||
imx6_pcie_init_phy(imx6_pcie);
|
if (ret)
|
||||||
imx6_pcie_deassert_core_reset(imx6_pcie);
|
return ret;
|
||||||
dw_pcie_setup_rc(pp);
|
dw_pcie_setup_rc(pp);
|
||||||
|
|
||||||
ret = imx6_pcie_start_link(imx6_pcie->pci);
|
if (imx6_pcie->link_is_up)
|
||||||
if (ret < 0)
|
imx6_pcie_start_link(imx6_pcie->pci);
|
||||||
dev_info(dev, "pcie link is down after resume.\n");
|
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
#endif
|
|
||||||
|
|
||||||
static const struct dev_pm_ops imx6_pcie_pm_ops = {
|
static const struct dev_pm_ops imx6_pcie_pm_ops = {
|
||||||
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(imx6_pcie_suspend_noirq,
|
NOIRQ_SYSTEM_SLEEP_PM_OPS(imx6_pcie_suspend_noirq,
|
||||||
imx6_pcie_resume_noirq)
|
imx6_pcie_resume_noirq)
|
||||||
};
|
};
|
||||||
|
|
||||||
static int imx6_pcie_probe(struct platform_device *pdev)
|
static int imx6_pcie_probe(struct platform_device *pdev)
|
||||||
|
|
Загрузка…
Ссылка в новой задаче