ARM: LPAE: accomodate >32-bit addresses for page table base

This patch redefines the early boot time use of the R4 register to steal a few
low order bits (ARCH_PGD_SHIFT bits) on LPAE systems.  This allows for up to
38-bit physical addresses.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Subash Patel <subash.rp@samsung.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This commit is contained in:
Cyril Chemparathy 2012-07-21 15:55:04 -04:00 коммит произвёл Will Deacon
Родитель a7fbc0d62a
Коммит 4756dcbfd3
4 изменённых файлов: 37 добавлений и 8 удалений

Просмотреть файл

@ -18,6 +18,8 @@
#include <linux/types.h>
#include <linux/sizes.h>
#include <asm/cache.h>
#ifdef CONFIG_NEED_MACH_MEMORY_H
#include <mach/memory.h>
#endif
@ -141,6 +143,20 @@
#define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page)))
#define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys)))
/*
* Minimum guaranted alignment in pgd_alloc(). The page table pointers passed
* around in head.S and proc-*.S are shifted by this amount, in order to
* leave spare high bits for systems with physical address extension. This
* does not fully accomodate the 40-bit addressing capability of ARM LPAE, but
* gives us about 38-bits or so.
*/
#ifdef CONFIG_ARM_LPAE
#define ARCH_PGD_SHIFT L1_CACHE_SHIFT
#else
#define ARCH_PGD_SHIFT 0
#endif
#define ARCH_PGD_MASK ((1 << ARCH_PGD_SHIFT) - 1)
#ifndef __ASSEMBLY__
/*

Просмотреть файл

@ -156,7 +156,7 @@ ENDPROC(stext)
*
* Returns:
* r0, r3, r5-r7 corrupted
* r4 = physical page table address
* r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h)
*/
__create_page_tables:
pgtbl r4, r8 @ page table address
@ -331,6 +331,7 @@ __create_page_tables:
#endif
#ifdef CONFIG_ARM_LPAE
sub r4, r4, #0x1000 @ point to the PGD table
mov r4, r4, lsr #ARCH_PGD_SHIFT
#endif
mov pc, lr
ENDPROC(__create_page_tables)
@ -408,7 +409,7 @@ __secondary_data:
* r0 = cp#15 control register
* r1 = machine ID
* r2 = atags or dtb pointer
* r4 = page table pointer
* r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h)
* r9 = processor ID
* r13 = *virtual* address to jump to upon completion
*/
@ -427,10 +428,7 @@ __enable_mmu:
#ifdef CONFIG_CPU_ICACHE_DISABLE
bic r0, r0, #CR_I
#endif
#ifdef CONFIG_ARM_LPAE
mov r5, #0
mcrr p15, 0, r4, r5, c2 @ load TTBR0
#else
#ifndef CONFIG_ARM_LPAE
mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \

Просмотреть файл

@ -78,6 +78,13 @@ void __init smp_set_ops(struct smp_operations *ops)
smp_ops = *ops;
};
static unsigned long get_arch_pgd(pgd_t *pgd)
{
phys_addr_t pgdir = virt_to_phys(pgd);
BUG_ON(pgdir & ARCH_PGD_MASK);
return pgdir >> ARCH_PGD_SHIFT;
}
int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
{
int ret;
@ -87,8 +94,8 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
* its stack and the page tables.
*/
secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
secondary_data.pgdir = virt_to_phys(idmap_pgd);
secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir);
secondary_data.pgdir = get_arch_pgd(idmap_pgd);
secondary_data.swapper_pg_dir = get_arch_pgd(swapper_pg_dir);
__cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data));
outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1));

Просмотреть файл

@ -114,6 +114,7 @@ ENDPROC(cpu_v7_set_pte_ext)
*/
.macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp
ldr \tmp, =swapper_pg_dir @ swapper_pg_dir virtual address
mov \tmp, \tmp, lsr #ARCH_PGD_SHIFT
cmp \ttbr1, \tmp @ PHYS_OFFSET > PAGE_OFFSET?
mrc p15, 0, \tmp, c2, c0, 2 @ TTB control register
orr \tmp, \tmp, #TTB_EAE
@ -128,8 +129,15 @@ ENDPROC(cpu_v7_set_pte_ext)
*/
orrls \tmp, \tmp, #TTBR1_SIZE @ TTBCR.T1SZ
mcr p15, 0, \tmp, c2, c0, 2 @ TTBCR
mov \tmp, \ttbr1, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits
mov \ttbr1, \ttbr1, lsl #ARCH_PGD_SHIFT @ lower bits
addls \ttbr1, \ttbr1, #TTBR1_OFFSET
mcrr p15, 1, \ttbr1, \zero, c2 @ load TTBR1
mov \tmp, \ttbr0, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits
mov \ttbr0, \ttbr0, lsl #ARCH_PGD_SHIFT @ lower bits
mcrr p15, 0, \ttbr0, \zero, c2 @ load TTBR0
mcrr p15, 1, \ttbr1, \zero, c2 @ load TTBR1
mcrr p15, 0, \ttbr0, \zero, c2 @ load TTBR0
.endm
__CPUINIT