ARM: dts: overo: Add support for 4.3'' LCD output
Chestnut43, Gallop43 and Palo43 expansion boards have a ZIF connector for a 4.3'' LCD. Add a common include file for this configuration, and use it on relevant expansion boards. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Родитель
f376661d2f
Коммит
4783dc8470
|
@ -11,6 +11,7 @@
|
|||
*/
|
||||
|
||||
#include "omap3-overo-common-peripherals.dtsi"
|
||||
#include "omap3-overo-common-lcd43.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
|
|
|
@ -0,0 +1,178 @@
|
|||
/*
|
||||
* Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/*
|
||||
* 4.3'' LCD panel output for some Gumstix Overo boards (Gallop43, Chestnut43)
|
||||
*/
|
||||
|
||||
&omap3_pmx_core {
|
||||
dss_dpi_pins: pinmux_dss_dpi_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
|
||||
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
|
||||
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
|
||||
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
|
||||
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
|
||||
OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
|
||||
OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
|
||||
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
|
||||
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
|
||||
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
|
||||
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
|
||||
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
|
||||
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
|
||||
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
|
||||
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
|
||||
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
|
||||
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
|
||||
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
|
||||
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
|
||||
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
||||
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
|
||||
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
|
||||
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
|
||||
OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
|
||||
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
|
||||
OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
|
||||
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
|
||||
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
|
||||
>;
|
||||
};
|
||||
|
||||
lte430_pins: pinmux_lte430_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x2174, PIN_OUTPUT | MUX_MODE4) /* uart2_cts.gpio_144 */
|
||||
>;
|
||||
};
|
||||
|
||||
backlight_pins: pinmux_backlight_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE4) /* uart2_rts.gpio_145 */
|
||||
>;
|
||||
};
|
||||
|
||||
mcspi1_pins: pinmux_mcspi1_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
|
||||
OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
|
||||
OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
|
||||
OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
|
||||
>;
|
||||
};
|
||||
|
||||
ads7846_pins: pinmux_ads7846_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT_PULLDOWN | MUX_MODE4) /* csi2_dx1.gpio_114 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Needed to power the DPI pins */
|
||||
&vpll2 {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dss_dpi_pins>;
|
||||
|
||||
port {
|
||||
dpi_out: endpoint {
|
||||
remote-endpoint = <&lcd_in>;
|
||||
data-lines = <24>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
display0 = &lcd0;
|
||||
};
|
||||
|
||||
lcd0: display@0 {
|
||||
compatible = "samsung,lte430wq-f0c", "panel-dpi";
|
||||
label = "lcd";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <<e430_pins>;
|
||||
enable-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
|
||||
|
||||
port {
|
||||
lcd_in: endpoint {
|
||||
remote-endpoint = <&dpi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
panel-timing {
|
||||
clock-frequency = <9200000>;
|
||||
hactive = <480>;
|
||||
vactive = <272>;
|
||||
hfront-porch = <8>;
|
||||
hback-porch = <4>;
|
||||
hsync-len = <41>;
|
||||
vback-porch = <2>;
|
||||
vfront-porch = <4>;
|
||||
vsync-len = <10>;
|
||||
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ads7846reg: ads7846-reg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "ads7846-reg";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
backlight {
|
||||
compatible = "gpio-backlight";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&backlight_pins>;
|
||||
gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* gpio_145 */
|
||||
|
||||
default-on;
|
||||
};
|
||||
};
|
||||
|
||||
&mcspi1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcspi1_pins>;
|
||||
|
||||
/* touch controller */
|
||||
ads7846@0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ads7846_pins>;
|
||||
|
||||
compatible = "ti,ads7846";
|
||||
vcc-supply = <&ads7846reg>;
|
||||
|
||||
reg = <0>; /* CS0 */
|
||||
spi-max-frequency = <1500000>;
|
||||
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <18 0>; /* gpio_114 */
|
||||
pendown-gpio = <&gpio4 18 0>;
|
||||
|
||||
ti,x-min = /bits/ 16 <0x0>;
|
||||
ti,x-max = /bits/ 16 <0x0fff>;
|
||||
ti,y-min = /bits/ 16 <0x0>;
|
||||
ti,y-max = /bits/ 16 <0x0fff>;
|
||||
ti,x-plate-ohms = /bits/ 16 <180>;
|
||||
ti,pressure-max = /bits/ 16 <255>;
|
||||
|
||||
linux,wakeup;
|
||||
};
|
||||
};
|
||||
|
|
@ -11,6 +11,7 @@
|
|||
*/
|
||||
|
||||
#include "omap3-overo-common-peripherals.dtsi"
|
||||
#include "omap3-overo-common-lcd43.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
|
|
|
@ -11,6 +11,7 @@
|
|||
*/
|
||||
|
||||
#include "omap3-overo-common-peripherals.dtsi"
|
||||
#include "omap3-overo-common-lcd43.dtsi"
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
|
|
Загрузка…
Ссылка в новой задаче