mfd: Align ab8500 with the abx500 interface
This patch makes the ab8500 mixed signal chip expose the same interface for register access as the ab3100, ab3550 and ab5500 chip. The ab8500_read() and ab8500_write() is removed and replaced with abx500_get_register_interruptible() and abx500_set_register_interruptible(). Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Mattias Wallin
Samuel Ortiz
Родитель
f4ebcab360
Коммит
47c1697508
|
|
@ -434,7 +434,7 @@ config PCF50633_GPIO
|
|||
|
||||
config ABX500_CORE
|
||||
bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
|
||||
default y if ARCH_U300
|
||||
default y if ARCH_U300 || ARCH_U8500
|
||||
help
|
||||
Say yes here if you have the ABX500 Mixed Signal IC family
|
||||
chips. This core driver expose register access functions.
|
||||
|
|
@ -475,7 +475,7 @@ config EZX_PCAP
|
|||
|
||||
config AB8500_CORE
|
||||
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
|
||||
depends on SPI=y && GENERIC_HARDIRQS
|
||||
depends on SPI=y && GENERIC_HARDIRQS && ABX500_CORE
|
||||
select MFD_CORE
|
||||
help
|
||||
Select this option to enable access to AB8500 power management
|
||||
|
|
|
|||
|
|
@ -4,6 +4,7 @@
|
|||
* License Terms: GNU General Public License v2
|
||||
* Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
|
||||
* Author: Rabin Vincent <rabin.vincent@stericsson.com>
|
||||
* Changes: Mattias Wallin <mattias.wallin@stericsson.com>
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
|
|
@ -15,6 +16,7 @@
|
|||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mfd/core.h>
|
||||
#include <linux/mfd/abx500.h>
|
||||
#include <linux/mfd/ab8500.h>
|
||||
#include <linux/regulator/ab8500.h>
|
||||
|
||||
|
|
@ -22,71 +24,71 @@
|
|||
* Interrupt register offsets
|
||||
* Bank : 0x0E
|
||||
*/
|
||||
#define AB8500_IT_SOURCE1_REG 0x0E00
|
||||
#define AB8500_IT_SOURCE2_REG 0x0E01
|
||||
#define AB8500_IT_SOURCE3_REG 0x0E02
|
||||
#define AB8500_IT_SOURCE4_REG 0x0E03
|
||||
#define AB8500_IT_SOURCE5_REG 0x0E04
|
||||
#define AB8500_IT_SOURCE6_REG 0x0E05
|
||||
#define AB8500_IT_SOURCE7_REG 0x0E06
|
||||
#define AB8500_IT_SOURCE8_REG 0x0E07
|
||||
#define AB8500_IT_SOURCE19_REG 0x0E12
|
||||
#define AB8500_IT_SOURCE20_REG 0x0E13
|
||||
#define AB8500_IT_SOURCE21_REG 0x0E14
|
||||
#define AB8500_IT_SOURCE22_REG 0x0E15
|
||||
#define AB8500_IT_SOURCE23_REG 0x0E16
|
||||
#define AB8500_IT_SOURCE24_REG 0x0E17
|
||||
#define AB8500_IT_SOURCE1_REG 0x00
|
||||
#define AB8500_IT_SOURCE2_REG 0x01
|
||||
#define AB8500_IT_SOURCE3_REG 0x02
|
||||
#define AB8500_IT_SOURCE4_REG 0x03
|
||||
#define AB8500_IT_SOURCE5_REG 0x04
|
||||
#define AB8500_IT_SOURCE6_REG 0x05
|
||||
#define AB8500_IT_SOURCE7_REG 0x06
|
||||
#define AB8500_IT_SOURCE8_REG 0x07
|
||||
#define AB8500_IT_SOURCE19_REG 0x12
|
||||
#define AB8500_IT_SOURCE20_REG 0x13
|
||||
#define AB8500_IT_SOURCE21_REG 0x14
|
||||
#define AB8500_IT_SOURCE22_REG 0x15
|
||||
#define AB8500_IT_SOURCE23_REG 0x16
|
||||
#define AB8500_IT_SOURCE24_REG 0x17
|
||||
|
||||
/*
|
||||
* latch registers
|
||||
*/
|
||||
#define AB8500_IT_LATCH1_REG 0x0E20
|
||||
#define AB8500_IT_LATCH2_REG 0x0E21
|
||||
#define AB8500_IT_LATCH3_REG 0x0E22
|
||||
#define AB8500_IT_LATCH4_REG 0x0E23
|
||||
#define AB8500_IT_LATCH5_REG 0x0E24
|
||||
#define AB8500_IT_LATCH6_REG 0x0E25
|
||||
#define AB8500_IT_LATCH7_REG 0x0E26
|
||||
#define AB8500_IT_LATCH8_REG 0x0E27
|
||||
#define AB8500_IT_LATCH9_REG 0x0E28
|
||||
#define AB8500_IT_LATCH10_REG 0x0E29
|
||||
#define AB8500_IT_LATCH19_REG 0x0E32
|
||||
#define AB8500_IT_LATCH20_REG 0x0E33
|
||||
#define AB8500_IT_LATCH21_REG 0x0E34
|
||||
#define AB8500_IT_LATCH22_REG 0x0E35
|
||||
#define AB8500_IT_LATCH23_REG 0x0E36
|
||||
#define AB8500_IT_LATCH24_REG 0x0E37
|
||||
#define AB8500_IT_LATCH1_REG 0x20
|
||||
#define AB8500_IT_LATCH2_REG 0x21
|
||||
#define AB8500_IT_LATCH3_REG 0x22
|
||||
#define AB8500_IT_LATCH4_REG 0x23
|
||||
#define AB8500_IT_LATCH5_REG 0x24
|
||||
#define AB8500_IT_LATCH6_REG 0x25
|
||||
#define AB8500_IT_LATCH7_REG 0x26
|
||||
#define AB8500_IT_LATCH8_REG 0x27
|
||||
#define AB8500_IT_LATCH9_REG 0x28
|
||||
#define AB8500_IT_LATCH10_REG 0x29
|
||||
#define AB8500_IT_LATCH19_REG 0x32
|
||||
#define AB8500_IT_LATCH20_REG 0x33
|
||||
#define AB8500_IT_LATCH21_REG 0x34
|
||||
#define AB8500_IT_LATCH22_REG 0x35
|
||||
#define AB8500_IT_LATCH23_REG 0x36
|
||||
#define AB8500_IT_LATCH24_REG 0x37
|
||||
|
||||
/*
|
||||
* mask registers
|
||||
*/
|
||||
|
||||
#define AB8500_IT_MASK1_REG 0x0E40
|
||||
#define AB8500_IT_MASK2_REG 0x0E41
|
||||
#define AB8500_IT_MASK3_REG 0x0E42
|
||||
#define AB8500_IT_MASK4_REG 0x0E43
|
||||
#define AB8500_IT_MASK5_REG 0x0E44
|
||||
#define AB8500_IT_MASK6_REG 0x0E45
|
||||
#define AB8500_IT_MASK7_REG 0x0E46
|
||||
#define AB8500_IT_MASK8_REG 0x0E47
|
||||
#define AB8500_IT_MASK9_REG 0x0E48
|
||||
#define AB8500_IT_MASK10_REG 0x0E49
|
||||
#define AB8500_IT_MASK11_REG 0x0E4A
|
||||
#define AB8500_IT_MASK12_REG 0x0E4B
|
||||
#define AB8500_IT_MASK13_REG 0x0E4C
|
||||
#define AB8500_IT_MASK14_REG 0x0E4D
|
||||
#define AB8500_IT_MASK15_REG 0x0E4E
|
||||
#define AB8500_IT_MASK16_REG 0x0E4F
|
||||
#define AB8500_IT_MASK17_REG 0x0E50
|
||||
#define AB8500_IT_MASK18_REG 0x0E51
|
||||
#define AB8500_IT_MASK19_REG 0x0E52
|
||||
#define AB8500_IT_MASK20_REG 0x0E53
|
||||
#define AB8500_IT_MASK21_REG 0x0E54
|
||||
#define AB8500_IT_MASK22_REG 0x0E55
|
||||
#define AB8500_IT_MASK23_REG 0x0E56
|
||||
#define AB8500_IT_MASK24_REG 0x0E57
|
||||
#define AB8500_IT_MASK1_REG 0x40
|
||||
#define AB8500_IT_MASK2_REG 0x41
|
||||
#define AB8500_IT_MASK3_REG 0x42
|
||||
#define AB8500_IT_MASK4_REG 0x43
|
||||
#define AB8500_IT_MASK5_REG 0x44
|
||||
#define AB8500_IT_MASK6_REG 0x45
|
||||
#define AB8500_IT_MASK7_REG 0x46
|
||||
#define AB8500_IT_MASK8_REG 0x47
|
||||
#define AB8500_IT_MASK9_REG 0x48
|
||||
#define AB8500_IT_MASK10_REG 0x49
|
||||
#define AB8500_IT_MASK11_REG 0x4A
|
||||
#define AB8500_IT_MASK12_REG 0x4B
|
||||
#define AB8500_IT_MASK13_REG 0x4C
|
||||
#define AB8500_IT_MASK14_REG 0x4D
|
||||
#define AB8500_IT_MASK15_REG 0x4E
|
||||
#define AB8500_IT_MASK16_REG 0x4F
|
||||
#define AB8500_IT_MASK17_REG 0x50
|
||||
#define AB8500_IT_MASK18_REG 0x51
|
||||
#define AB8500_IT_MASK19_REG 0x52
|
||||
#define AB8500_IT_MASK20_REG 0x53
|
||||
#define AB8500_IT_MASK21_REG 0x54
|
||||
#define AB8500_IT_MASK22_REG 0x55
|
||||
#define AB8500_IT_MASK23_REG 0x56
|
||||
#define AB8500_IT_MASK24_REG 0x57
|
||||
|
||||
#define AB8500_REV_REG 0x1080
|
||||
#define AB8500_REV_REG 0x80
|
||||
|
||||
/*
|
||||
* Map interrupt numbers to the LATCH and MASK register offsets, Interrupt
|
||||
|
|
@ -99,96 +101,132 @@ static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = {
|
|||
0, 1, 2, 3, 4, 6, 7, 8, 9, 18, 19, 20, 21,
|
||||
};
|
||||
|
||||
static int __ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data)
|
||||
static int ab8500_get_chip_id(struct device *dev)
|
||||
{
|
||||
struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
|
||||
return (int)ab8500->chip_id;
|
||||
}
|
||||
|
||||
static int set_register_interruptible(struct ab8500 *ab8500, u8 bank,
|
||||
u8 reg, u8 data)
|
||||
{
|
||||
int ret;
|
||||
/*
|
||||
* Put the u8 bank and u8 register together into a an u16.
|
||||
* The bank on higher 8 bits and register in lower 8 bits.
|
||||
* */
|
||||
u16 addr = ((u16)bank) << 8 | reg;
|
||||
|
||||
dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data);
|
||||
|
||||
ret = mutex_lock_interruptible(&ab8500->lock);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = ab8500->write(ab8500, addr, data);
|
||||
if (ret < 0)
|
||||
dev_err(ab8500->dev, "failed to write reg %#x: %d\n",
|
||||
addr, ret);
|
||||
mutex_unlock(&ab8500->lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ab8500_set_register(struct device *dev, u8 bank,
|
||||
u8 reg, u8 value)
|
||||
{
|
||||
struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
|
||||
|
||||
return set_register_interruptible(ab8500, bank, reg, value);
|
||||
}
|
||||
|
||||
static int get_register_interruptible(struct ab8500 *ab8500, u8 bank,
|
||||
u8 reg, u8 *value)
|
||||
{
|
||||
int ret;
|
||||
/* put the u8 bank and u8 reg together into a an u16.
|
||||
* bank on higher 8 bits and reg in lower */
|
||||
u16 addr = ((u16)bank) << 8 | reg;
|
||||
|
||||
ret = mutex_lock_interruptible(&ab8500->lock);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = ab8500->read(ab8500, addr);
|
||||
if (ret < 0)
|
||||
dev_err(ab8500->dev, "failed to read reg %#x: %d\n",
|
||||
addr, ret);
|
||||
else
|
||||
*value = ret;
|
||||
|
||||
mutex_unlock(&ab8500->lock);
|
||||
dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int ab8500_get_register(struct device *dev, u8 bank,
|
||||
u8 reg, u8 *value)
|
||||
{
|
||||
struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
|
||||
|
||||
return get_register_interruptible(ab8500, bank, reg, value);
|
||||
}
|
||||
|
||||
static int mask_and_set_register_interruptible(struct ab8500 *ab8500, u8 bank,
|
||||
u8 reg, u8 bitmask, u8 bitvalues)
|
||||
{
|
||||
int ret;
|
||||
u8 data;
|
||||
/* put the u8 bank and u8 reg together into a an u16.
|
||||
* bank on higher 8 bits and reg in lower */
|
||||
u16 addr = ((u16)bank) << 8 | reg;
|
||||
|
||||
ret = mutex_lock_interruptible(&ab8500->lock);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = ab8500->read(ab8500, addr);
|
||||
if (ret < 0) {
|
||||
dev_err(ab8500->dev, "failed to read reg %#x: %d\n",
|
||||
addr, ret);
|
||||
goto out;
|
||||
}
|
||||
|
||||
data = (u8)ret;
|
||||
data = (~bitmask & data) | (bitmask & bitvalues);
|
||||
|
||||
ret = ab8500->write(ab8500, addr, data);
|
||||
if (ret < 0)
|
||||
dev_err(ab8500->dev, "failed to write reg %#x: %d\n",
|
||||
addr, ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* ab8500_write() - write an AB8500 register
|
||||
* @ab8500: device to write to
|
||||
* @addr: address of the register
|
||||
* @data: value to write
|
||||
*/
|
||||
int ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data)
|
||||
{
|
||||
int ret;
|
||||
|
||||
mutex_lock(&ab8500->lock);
|
||||
ret = __ab8500_write(ab8500, addr, data);
|
||||
mutex_unlock(&ab8500->lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(ab8500_write);
|
||||
|
||||
static int __ab8500_read(struct ab8500 *ab8500, u16 addr)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = ab8500->read(ab8500, addr);
|
||||
if (ret < 0)
|
||||
dev_err(ab8500->dev, "failed to read reg %#x: %d\n",
|
||||
addr, ret);
|
||||
|
||||
dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* ab8500_read() - read an AB8500 register
|
||||
* @ab8500: device to read from
|
||||
* @addr: address of the register
|
||||
*/
|
||||
int ab8500_read(struct ab8500 *ab8500, u16 addr)
|
||||
{
|
||||
int ret;
|
||||
|
||||
mutex_lock(&ab8500->lock);
|
||||
ret = __ab8500_read(ab8500, addr);
|
||||
mutex_unlock(&ab8500->lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(ab8500_read);
|
||||
|
||||
/**
|
||||
* ab8500_set_bits() - set a bitfield in an AB8500 register
|
||||
* @ab8500: device to read from
|
||||
* @addr: address of the register
|
||||
* @mask: mask of the bitfield to modify
|
||||
* @data: value to set to the bitfield
|
||||
*/
|
||||
int ab8500_set_bits(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data)
|
||||
{
|
||||
int ret;
|
||||
|
||||
mutex_lock(&ab8500->lock);
|
||||
|
||||
ret = __ab8500_read(ab8500, addr);
|
||||
if (ret < 0)
|
||||
goto out;
|
||||
|
||||
ret &= ~mask;
|
||||
ret |= data;
|
||||
|
||||
ret = __ab8500_write(ab8500, addr, ret);
|
||||
|
||||
dev_vdbg(ab8500->dev, "mask: addr %#x => data %#x\n", addr, data);
|
||||
out:
|
||||
mutex_unlock(&ab8500->lock);
|
||||
return ret;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(ab8500_set_bits);
|
||||
|
||||
static int ab8500_mask_and_set_register(struct device *dev,
|
||||
u8 bank, u8 reg, u8 bitmask, u8 bitvalues)
|
||||
{
|
||||
struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
|
||||
|
||||
return mask_and_set_register_interruptible(ab8500, bank, reg,
|
||||
bitmask, bitvalues);
|
||||
|
||||
}
|
||||
|
||||
static struct abx500_ops ab8500_ops = {
|
||||
.get_chip_id = ab8500_get_chip_id,
|
||||
.get_register = ab8500_get_register,
|
||||
.set_register = ab8500_set_register,
|
||||
.get_register_page = NULL,
|
||||
.set_register_page = NULL,
|
||||
.mask_and_set_register = ab8500_mask_and_set_register,
|
||||
.event_registers_startup_state_get = NULL,
|
||||
.startup_irq_enabled = NULL,
|
||||
};
|
||||
|
||||
static void ab8500_irq_lock(unsigned int irq)
|
||||
{
|
||||
|
|
@ -213,7 +251,7 @@ static void ab8500_irq_sync_unlock(unsigned int irq)
|
|||
ab8500->oldmask[i] = new;
|
||||
|
||||
reg = AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i];
|
||||
ab8500_write(ab8500, reg, new);
|
||||
set_register_interruptible(ab8500, AB8500_INTERRUPT, reg, new);
|
||||
}
|
||||
|
||||
mutex_unlock(&ab8500->irq_lock);
|
||||
|
|
@ -257,9 +295,11 @@ static irqreturn_t ab8500_irq(int irq, void *dev)
|
|||
for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) {
|
||||
int regoffset = ab8500_irq_regoffset[i];
|
||||
int status;
|
||||
u8 value;
|
||||
|
||||
status = ab8500_read(ab8500, AB8500_IT_LATCH1_REG + regoffset);
|
||||
if (status <= 0)
|
||||
status = get_register_interruptible(ab8500, AB8500_INTERRUPT,
|
||||
AB8500_IT_LATCH1_REG + regoffset, &value);
|
||||
if (status < 0 || value == 0)
|
||||
continue;
|
||||
|
||||
do {
|
||||
|
|
@ -267,8 +307,8 @@ static irqreturn_t ab8500_irq(int irq, void *dev)
|
|||
int line = i * 8 + bit;
|
||||
|
||||
handle_nested_irq(ab8500->irq_base + line);
|
||||
status &= ~(1 << bit);
|
||||
} while (status);
|
||||
value &= ~(1 << bit);
|
||||
} while (value);
|
||||
}
|
||||
|
||||
return IRQ_HANDLED;
|
||||
|
|
@ -381,6 +421,7 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
|
|||
struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev);
|
||||
int ret;
|
||||
int i;
|
||||
u8 value;
|
||||
|
||||
if (plat)
|
||||
ab8500->irq_base = plat->irq_base;
|
||||
|
|
@ -388,7 +429,8 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
|
|||
mutex_init(&ab8500->lock);
|
||||
mutex_init(&ab8500->irq_lock);
|
||||
|
||||
ret = ab8500_read(ab8500, AB8500_REV_REG);
|
||||
ret = get_register_interruptible(ab8500, AB8500_MISC,
|
||||
AB8500_REV_REG, &value);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
|
|
@ -397,28 +439,37 @@ int __devinit ab8500_init(struct ab8500 *ab8500)
|
|||
* 0x10 - Cut 1.0
|
||||
* 0x11 - Cut 1.1
|
||||
*/
|
||||
if (ret == 0x0 || ret == 0x10 || ret == 0x11) {
|
||||
ab8500->revision = ret;
|
||||
dev_info(ab8500->dev, "detected chip, revision: %#x\n", ret);
|
||||
if (value == 0x0 || value == 0x10 || value == 0x11) {
|
||||
ab8500->revision = value;
|
||||
dev_info(ab8500->dev, "detected chip, revision: %#x\n", value);
|
||||
} else {
|
||||
dev_err(ab8500->dev, "unknown chip, revision: %#x\n", ret);
|
||||
dev_err(ab8500->dev, "unknown chip, revision: %#x\n", value);
|
||||
return -EINVAL;
|
||||
}
|
||||
ab8500->chip_id = value;
|
||||
|
||||
if (plat && plat->init)
|
||||
plat->init(ab8500);
|
||||
|
||||
/* Clear and mask all interrupts */
|
||||
for (i = 0; i < 10; i++) {
|
||||
ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i);
|
||||
ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff);
|
||||
get_register_interruptible(ab8500, AB8500_INTERRUPT,
|
||||
AB8500_IT_LATCH1_REG + i, &value);
|
||||
set_register_interruptible(ab8500, AB8500_INTERRUPT,
|
||||
AB8500_IT_MASK1_REG + i, 0xff);
|
||||
}
|
||||
|
||||
for (i = 18; i < 24; i++) {
|
||||
ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i);
|
||||
ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff);
|
||||
get_register_interruptible(ab8500, AB8500_INTERRUPT,
|
||||
AB8500_IT_LATCH1_REG + i, &value);
|
||||
set_register_interruptible(ab8500, AB8500_INTERRUPT,
|
||||
AB8500_IT_MASK1_REG + i, 0xff);
|
||||
}
|
||||
|
||||
ret = abx500_register_ops(ab8500->dev, &ab8500_ops);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
for (i = 0; i < AB8500_NUM_IRQ_REGS; i++)
|
||||
ab8500->mask[i] = ab8500->oldmask[i] = 0xff;
|
||||
|
||||
|
|
|
|||
|
|
@ -21,6 +21,7 @@
|
|||
#include <linux/err.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mfd/ab8500.h>
|
||||
#include <linux/mfd/abx500.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/regulator/ab8500.h>
|
||||
|
|
@ -33,9 +34,11 @@
|
|||
* @max_uV: maximum voltage (for variable voltage supplies)
|
||||
* @min_uV: minimum voltage (for variable voltage supplies)
|
||||
* @fixed_uV: typical voltage (for fixed voltage supplies)
|
||||
* @update_bank: bank to control on/off
|
||||
* @update_reg: register to control on/off
|
||||
* @mask: mask to enable/disable regulator
|
||||
* @enable: bits to enable the regulator in normal(high power) mode
|
||||
* @voltage_bank: bank to control regulator voltage
|
||||
* @voltage_reg: register to control regulator voltage
|
||||
* @voltage_mask: mask to control regulator voltage
|
||||
* @supported_voltages: supported voltage table
|
||||
|
|
@ -49,11 +52,13 @@ struct ab8500_regulator_info {
|
|||
int max_uV;
|
||||
int min_uV;
|
||||
int fixed_uV;
|
||||
int update_reg;
|
||||
int mask;
|
||||
int enable;
|
||||
int voltage_reg;
|
||||
int voltage_mask;
|
||||
u8 update_bank;
|
||||
u8 update_reg;
|
||||
u8 mask;
|
||||
u8 enable;
|
||||
u8 voltage_bank;
|
||||
u8 voltage_reg;
|
||||
u8 voltage_mask;
|
||||
int const *supported_voltages;
|
||||
int voltages_len;
|
||||
};
|
||||
|
|
@ -97,8 +102,8 @@ static int ab8500_regulator_enable(struct regulator_dev *rdev)
|
|||
if (regulator_id >= AB8500_NUM_REGULATORS)
|
||||
return -EINVAL;
|
||||
|
||||
ret = ab8500_set_bits(info->ab8500, info->update_reg,
|
||||
info->mask, info->enable);
|
||||
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
||||
info->update_bank, info->update_reg, info->mask, info->enable);
|
||||
if (ret < 0)
|
||||
dev_err(rdev_get_dev(rdev),
|
||||
"couldn't set enable bits for regulator\n");
|
||||
|
|
@ -114,8 +119,8 @@ static int ab8500_regulator_disable(struct regulator_dev *rdev)
|
|||
if (regulator_id >= AB8500_NUM_REGULATORS)
|
||||
return -EINVAL;
|
||||
|
||||
ret = ab8500_set_bits(info->ab8500, info->update_reg,
|
||||
info->mask, 0x0);
|
||||
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
||||
info->update_bank, info->update_reg, info->mask, 0x0);
|
||||
if (ret < 0)
|
||||
dev_err(rdev_get_dev(rdev),
|
||||
"couldn't set disable bits for regulator\n");
|
||||
|
|
@ -126,19 +131,21 @@ static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
|
|||
{
|
||||
int regulator_id, ret;
|
||||
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
u8 value;
|
||||
|
||||
regulator_id = rdev_get_id(rdev);
|
||||
if (regulator_id >= AB8500_NUM_REGULATORS)
|
||||
return -EINVAL;
|
||||
|
||||
ret = ab8500_read(info->ab8500, info->update_reg);
|
||||
ret = abx500_get_register_interruptible(info->dev,
|
||||
info->update_bank, info->update_reg, &value);
|
||||
if (ret < 0) {
|
||||
dev_err(rdev_get_dev(rdev),
|
||||
"couldn't read 0x%x register\n", info->update_reg);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (ret & info->mask)
|
||||
if (value & info->mask)
|
||||
return true;
|
||||
else
|
||||
return false;
|
||||
|
|
@ -165,14 +172,16 @@ static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
|
|||
|
||||
static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
|
||||
{
|
||||
int regulator_id, ret, val;
|
||||
int regulator_id, ret;
|
||||
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
|
||||
u8 value;
|
||||
|
||||
regulator_id = rdev_get_id(rdev);
|
||||
if (regulator_id >= AB8500_NUM_REGULATORS)
|
||||
return -EINVAL;
|
||||
|
||||
ret = ab8500_read(info->ab8500, info->voltage_reg);
|
||||
ret = abx500_get_register_interruptible(info->dev, info->voltage_bank,
|
||||
info->voltage_reg, &value);
|
||||
if (ret < 0) {
|
||||
dev_err(rdev_get_dev(rdev),
|
||||
"couldn't read voltage reg for regulator\n");
|
||||
|
|
@ -180,11 +189,11 @@ static int ab8500_regulator_get_voltage(struct regulator_dev *rdev)
|
|||
}
|
||||
|
||||
/* vintcore has a different layout */
|
||||
val = ret & info->voltage_mask;
|
||||
value &= info->voltage_mask;
|
||||
if (regulator_id == AB8500_LDO_INTCORE)
|
||||
ret = info->supported_voltages[val >> 0x3];
|
||||
ret = info->supported_voltages[value >> 0x3];
|
||||
else
|
||||
ret = info->supported_voltages[val];
|
||||
ret = info->supported_voltages[value];
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
|
@ -224,8 +233,9 @@ static int ab8500_regulator_set_voltage(struct regulator_dev *rdev,
|
|||
}
|
||||
|
||||
/* set the registers for the request */
|
||||
ret = ab8500_set_bits(info->ab8500, info->voltage_reg,
|
||||
info->voltage_mask, ret);
|
||||
ret = abx500_mask_and_set_register_interruptible(info->dev,
|
||||
info->voltage_bank, info->voltage_reg,
|
||||
info->voltage_mask, (u8)ret);
|
||||
if (ret < 0)
|
||||
dev_err(rdev_get_dev(rdev),
|
||||
"couldn't set voltage reg for regulator\n");
|
||||
|
|
@ -262,9 +272,9 @@ static struct regulator_ops ab8500_ldo_fixed_ops = {
|
|||
.list_voltage = ab8500_list_voltage,
|
||||
};
|
||||
|
||||
#define AB8500_LDO(_id, min, max, reg, reg_mask, reg_enable, \
|
||||
volt_reg, volt_mask, voltages, \
|
||||
len_volts) \
|
||||
#define AB8500_LDO(_id, min, max, bank, reg, reg_mask, \
|
||||
reg_enable, volt_bank, volt_reg, volt_mask, \
|
||||
voltages, len_volts) \
|
||||
{ \
|
||||
.desc = { \
|
||||
.name = "LDO-" #_id, \
|
||||
|
|
@ -275,9 +285,11 @@ static struct regulator_ops ab8500_ldo_fixed_ops = {
|
|||
}, \
|
||||
.min_uV = (min) * 1000, \
|
||||
.max_uV = (max) * 1000, \
|
||||
.update_bank = bank, \
|
||||
.update_reg = reg, \
|
||||
.mask = reg_mask, \
|
||||
.enable = reg_enable, \
|
||||
.voltage_bank = volt_bank, \
|
||||
.voltage_reg = volt_reg, \
|
||||
.voltage_mask = volt_mask, \
|
||||
.supported_voltages = voltages, \
|
||||
|
|
@ -285,8 +297,8 @@ static struct regulator_ops ab8500_ldo_fixed_ops = {
|
|||
.fixed_uV = 0, \
|
||||
}
|
||||
|
||||
#define AB8500_FIXED_LDO(_id, fixed, reg, reg_mask, \
|
||||
reg_enable) \
|
||||
#define AB8500_FIXED_LDO(_id, fixed, bank, reg, \
|
||||
reg_mask, reg_enable) \
|
||||
{ \
|
||||
.desc = { \
|
||||
.name = "LDO-" #_id, \
|
||||
|
|
@ -296,6 +308,7 @@ static struct regulator_ops ab8500_ldo_fixed_ops = {
|
|||
.owner = THIS_MODULE, \
|
||||
}, \
|
||||
.fixed_uV = fixed * 1000, \
|
||||
.update_bank = bank, \
|
||||
.update_reg = reg, \
|
||||
.mask = reg_mask, \
|
||||
.enable = reg_enable, \
|
||||
|
|
@ -304,28 +317,29 @@ static struct regulator_ops ab8500_ldo_fixed_ops = {
|
|||
static struct ab8500_regulator_info ab8500_regulator_info[] = {
|
||||
/*
|
||||
* Variable Voltage LDOs
|
||||
* name, min uV, max uV, ctrl reg, reg mask, enable mask,
|
||||
* volt ctrl reg, volt ctrl mask, volt table, num supported volts
|
||||
* name, min uV, max uV, ctrl bank, ctrl reg, reg mask, enable mask,
|
||||
* volt ctrl bank, volt ctrl reg, volt ctrl mask, volt table,
|
||||
* num supported volts
|
||||
*/
|
||||
AB8500_LDO(AUX1, 1100, 3300, 0x0409, 0x3, 0x1, 0x041f, 0xf,
|
||||
AB8500_LDO(AUX1, 1100, 3300, 0x04, 0x09, 0x3, 0x1, 0x04, 0x1f, 0xf,
|
||||
ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
|
||||
AB8500_LDO(AUX2, 1100, 3300, 0x0409, 0xc, 0x4, 0x0420, 0xf,
|
||||
AB8500_LDO(AUX2, 1100, 3300, 0x04, 0x09, 0xc, 0x4, 0x04, 0x20, 0xf,
|
||||
ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
|
||||
AB8500_LDO(AUX3, 1100, 3300, 0x040a, 0x3, 0x1, 0x0421, 0xf,
|
||||
AB8500_LDO(AUX3, 1100, 3300, 0x04, 0x0a, 0x3, 0x1, 0x04, 0x21, 0xf,
|
||||
ldo_vauxn_voltages, ARRAY_SIZE(ldo_vauxn_voltages)),
|
||||
AB8500_LDO(INTCORE, 1100, 3300, 0x0380, 0x4, 0x4, 0x0380, 0x38,
|
||||
AB8500_LDO(INTCORE, 1100, 3300, 0x03, 0x80, 0x4, 0x4, 0x03, 0x80, 0x38,
|
||||
ldo_vintcore_voltages, ARRAY_SIZE(ldo_vintcore_voltages)),
|
||||
|
||||
/*
|
||||
* Fixed Voltage LDOs
|
||||
* name, o/p uV, ctrl reg, enable, disable
|
||||
* name, o/p uV, ctrl bank, ctrl reg, enable, disable
|
||||
*/
|
||||
AB8500_FIXED_LDO(TVOUT, 2000, 0x0380, 0x2, 0x2),
|
||||
AB8500_FIXED_LDO(AUDIO, 2000, 0x0383, 0x2, 0x2),
|
||||
AB8500_FIXED_LDO(ANAMIC1, 2050, 0x0383, 0x4, 0x4),
|
||||
AB8500_FIXED_LDO(ANAMIC2, 2050, 0x0383, 0x8, 0x8),
|
||||
AB8500_FIXED_LDO(DMIC, 1800, 0x0383, 0x10, 0x10),
|
||||
AB8500_FIXED_LDO(ANA, 1200, 0x0383, 0xc, 0x4),
|
||||
AB8500_FIXED_LDO(TVOUT, 2000, 0x03, 0x80, 0x2, 0x2),
|
||||
AB8500_FIXED_LDO(AUDIO, 2000, 0x03, 0x83, 0x2, 0x2),
|
||||
AB8500_FIXED_LDO(ANAMIC1, 2050, 0x03, 0x83, 0x4, 0x4),
|
||||
AB8500_FIXED_LDO(ANAMIC2, 2050, 0x03, 0x83, 0x8, 0x8),
|
||||
AB8500_FIXED_LDO(DMIC, 1800, 0x03, 0x83, 0x10, 0x10),
|
||||
AB8500_FIXED_LDO(ANA, 1200, 0x03, 0x83, 0xc, 0x4),
|
||||
};
|
||||
|
||||
static inline struct ab8500_regulator_info *find_regulator_info(int id)
|
||||
|
|
|
|||
|
|
@ -14,26 +14,26 @@
|
|||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/rtc.h>
|
||||
#include <linux/mfd/abx500.h>
|
||||
#include <linux/mfd/ab8500.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#define AB8500_RTC_SOFF_STAT_REG 0x0F00
|
||||
#define AB8500_RTC_CC_CONF_REG 0x0F01
|
||||
#define AB8500_RTC_READ_REQ_REG 0x0F02
|
||||
#define AB8500_RTC_WATCH_TSECMID_REG 0x0F03
|
||||
#define AB8500_RTC_WATCH_TSECHI_REG 0x0F04
|
||||
#define AB8500_RTC_WATCH_TMIN_LOW_REG 0x0F05
|
||||
#define AB8500_RTC_WATCH_TMIN_MID_REG 0x0F06
|
||||
#define AB8500_RTC_WATCH_TMIN_HI_REG 0x0F07
|
||||
#define AB8500_RTC_ALRM_MIN_LOW_REG 0x0F08
|
||||
#define AB8500_RTC_ALRM_MIN_MID_REG 0x0F09
|
||||
#define AB8500_RTC_ALRM_MIN_HI_REG 0x0F0A
|
||||
#define AB8500_RTC_STAT_REG 0x0F0B
|
||||
#define AB8500_RTC_BKUP_CHG_REG 0x0F0C
|
||||
#define AB8500_RTC_FORCE_BKUP_REG 0x0F0D
|
||||
#define AB8500_RTC_CALIB_REG 0x0F0E
|
||||
#define AB8500_RTC_SWITCH_STAT_REG 0x0F0F
|
||||
#define AB8500_REV_REG 0x1080
|
||||
#define AB8500_RTC_SOFF_STAT_REG 0x00
|
||||
#define AB8500_RTC_CC_CONF_REG 0x01
|
||||
#define AB8500_RTC_READ_REQ_REG 0x02
|
||||
#define AB8500_RTC_WATCH_TSECMID_REG 0x03
|
||||
#define AB8500_RTC_WATCH_TSECHI_REG 0x04
|
||||
#define AB8500_RTC_WATCH_TMIN_LOW_REG 0x05
|
||||
#define AB8500_RTC_WATCH_TMIN_MID_REG 0x06
|
||||
#define AB8500_RTC_WATCH_TMIN_HI_REG 0x07
|
||||
#define AB8500_RTC_ALRM_MIN_LOW_REG 0x08
|
||||
#define AB8500_RTC_ALRM_MIN_MID_REG 0x09
|
||||
#define AB8500_RTC_ALRM_MIN_HI_REG 0x0A
|
||||
#define AB8500_RTC_STAT_REG 0x0B
|
||||
#define AB8500_RTC_BKUP_CHG_REG 0x0C
|
||||
#define AB8500_RTC_FORCE_BKUP_REG 0x0D
|
||||
#define AB8500_RTC_CALIB_REG 0x0E
|
||||
#define AB8500_RTC_SWITCH_STAT_REG 0x0F
|
||||
|
||||
/* RtcReadRequest bits */
|
||||
#define RTC_READ_REQUEST 0x01
|
||||
|
|
@ -46,13 +46,13 @@
|
|||
#define COUNTS_PER_SEC (0xF000 / 60)
|
||||
#define AB8500_RTC_EPOCH 2000
|
||||
|
||||
static const unsigned long ab8500_rtc_time_regs[] = {
|
||||
static const u8 ab8500_rtc_time_regs[] = {
|
||||
AB8500_RTC_WATCH_TMIN_HI_REG, AB8500_RTC_WATCH_TMIN_MID_REG,
|
||||
AB8500_RTC_WATCH_TMIN_LOW_REG, AB8500_RTC_WATCH_TSECHI_REG,
|
||||
AB8500_RTC_WATCH_TSECMID_REG
|
||||
};
|
||||
|
||||
static const unsigned long ab8500_rtc_alarm_regs[] = {
|
||||
static const u8 ab8500_rtc_alarm_regs[] = {
|
||||
AB8500_RTC_ALRM_MIN_HI_REG, AB8500_RTC_ALRM_MIN_MID_REG,
|
||||
AB8500_RTC_ALRM_MIN_LOW_REG
|
||||
};
|
||||
|
|
@ -76,29 +76,30 @@ static unsigned long get_elapsed_seconds(int year)
|
|||
|
||||
static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
||||
{
|
||||
struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
|
||||
unsigned long timeout = jiffies + HZ;
|
||||
int retval, i;
|
||||
unsigned long mins, secs;
|
||||
unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
|
||||
u8 value;
|
||||
|
||||
/* Request a data read */
|
||||
retval = ab8500_write(ab8500, AB8500_RTC_READ_REQ_REG,
|
||||
RTC_READ_REQUEST);
|
||||
retval = abx500_set_register_interruptible(dev,
|
||||
AB8500_RTC, AB8500_RTC_READ_REQ_REG, RTC_READ_REQUEST);
|
||||
if (retval < 0)
|
||||
return retval;
|
||||
|
||||
/* Early AB8500 chips will not clear the rtc read request bit */
|
||||
if (ab8500->revision == 0) {
|
||||
if (abx500_get_chip_id(dev) == 0) {
|
||||
msleep(1);
|
||||
} else {
|
||||
/* Wait for some cycles after enabling the rtc read in ab8500 */
|
||||
while (time_before(jiffies, timeout)) {
|
||||
retval = ab8500_read(ab8500, AB8500_RTC_READ_REQ_REG);
|
||||
retval = abx500_get_register_interruptible(dev,
|
||||
AB8500_RTC, AB8500_RTC_READ_REQ_REG, &value);
|
||||
if (retval < 0)
|
||||
return retval;
|
||||
|
||||
if (!(retval & RTC_READ_REQUEST))
|
||||
if (!(value & RTC_READ_REQUEST))
|
||||
break;
|
||||
|
||||
msleep(1);
|
||||
|
|
@ -107,10 +108,11 @@ static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|||
|
||||
/* Read the Watchtime registers */
|
||||
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
|
||||
retval = ab8500_read(ab8500, ab8500_rtc_time_regs[i]);
|
||||
retval = abx500_get_register_interruptible(dev,
|
||||
AB8500_RTC, ab8500_rtc_time_regs[i], &value);
|
||||
if (retval < 0)
|
||||
return retval;
|
||||
buf[i] = retval;
|
||||
buf[i] = value;
|
||||
}
|
||||
|
||||
mins = (buf[0] << 16) | (buf[1] << 8) | buf[2];
|
||||
|
|
@ -128,7 +130,6 @@ static int ab8500_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|||
|
||||
static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
||||
{
|
||||
struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
|
||||
int retval, i;
|
||||
unsigned char buf[ARRAY_SIZE(ab8500_rtc_time_regs)];
|
||||
unsigned long no_secs, no_mins, secs = 0;
|
||||
|
|
@ -162,27 +163,29 @@ static int ab8500_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|||
buf[0] = (no_mins >> 16) & 0xFF;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_time_regs); i++) {
|
||||
retval = ab8500_write(ab8500, ab8500_rtc_time_regs[i], buf[i]);
|
||||
retval = abx500_set_register_interruptible(dev, AB8500_RTC,
|
||||
ab8500_rtc_time_regs[i], buf[i]);
|
||||
if (retval < 0)
|
||||
return retval;
|
||||
}
|
||||
|
||||
/* Request a data write */
|
||||
return ab8500_write(ab8500, AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST);
|
||||
return abx500_set_register_interruptible(dev, AB8500_RTC,
|
||||
AB8500_RTC_READ_REQ_REG, RTC_WRITE_REQUEST);
|
||||
}
|
||||
|
||||
static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
||||
{
|
||||
struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
|
||||
int retval, i;
|
||||
int rtc_ctrl;
|
||||
u8 rtc_ctrl, value;
|
||||
unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
|
||||
unsigned long secs, mins;
|
||||
|
||||
/* Check if the alarm is enabled or not */
|
||||
rtc_ctrl = ab8500_read(ab8500, AB8500_RTC_STAT_REG);
|
||||
if (rtc_ctrl < 0)
|
||||
return rtc_ctrl;
|
||||
retval = abx500_get_register_interruptible(dev, AB8500_RTC,
|
||||
AB8500_RTC_STAT_REG, &rtc_ctrl);
|
||||
if (retval < 0)
|
||||
return retval;
|
||||
|
||||
if (rtc_ctrl & RTC_ALARM_ENA)
|
||||
alarm->enabled = 1;
|
||||
|
|
@ -192,10 +195,11 @@ static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|||
alarm->pending = 0;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
|
||||
retval = ab8500_read(ab8500, ab8500_rtc_alarm_regs[i]);
|
||||
retval = abx500_get_register_interruptible(dev, AB8500_RTC,
|
||||
ab8500_rtc_alarm_regs[i], &value);
|
||||
if (retval < 0)
|
||||
return retval;
|
||||
buf[i] = retval;
|
||||
buf[i] = value;
|
||||
}
|
||||
|
||||
mins = (buf[0] << 16) | (buf[1] << 8) | (buf[2]);
|
||||
|
|
@ -211,15 +215,13 @@ static int ab8500_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|||
|
||||
static int ab8500_rtc_irq_enable(struct device *dev, unsigned int enabled)
|
||||
{
|
||||
struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
|
||||
|
||||
return ab8500_set_bits(ab8500, AB8500_RTC_STAT_REG, RTC_ALARM_ENA,
|
||||
enabled ? RTC_ALARM_ENA : 0);
|
||||
return abx500_mask_and_set_register_interruptible(dev, AB8500_RTC,
|
||||
AB8500_RTC_STAT_REG, RTC_ALARM_ENA,
|
||||
enabled ? RTC_ALARM_ENA : 0);
|
||||
}
|
||||
|
||||
static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
||||
{
|
||||
struct ab8500 *ab8500 = dev_get_drvdata(dev->parent);
|
||||
int retval, i;
|
||||
unsigned char buf[ARRAY_SIZE(ab8500_rtc_alarm_regs)];
|
||||
unsigned long mins, secs = 0;
|
||||
|
|
@ -247,7 +249,8 @@ static int ab8500_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
|
|||
|
||||
/* Set the alarm time */
|
||||
for (i = 0; i < ARRAY_SIZE(ab8500_rtc_alarm_regs); i++) {
|
||||
retval = ab8500_write(ab8500, ab8500_rtc_alarm_regs[i], buf[i]);
|
||||
retval = abx500_set_register_interruptible(dev, AB8500_RTC,
|
||||
ab8500_rtc_alarm_regs[i], buf[i]);
|
||||
if (retval < 0)
|
||||
return retval;
|
||||
}
|
||||
|
|
@ -276,10 +279,9 @@ static const struct rtc_class_ops ab8500_rtc_ops = {
|
|||
|
||||
static int __devinit ab8500_rtc_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
|
||||
int err;
|
||||
struct rtc_device *rtc;
|
||||
int rtc_ctrl;
|
||||
u8 rtc_ctrl;
|
||||
int irq;
|
||||
|
||||
irq = platform_get_irq_byname(pdev, "ALARM");
|
||||
|
|
@ -287,17 +289,18 @@ static int __devinit ab8500_rtc_probe(struct platform_device *pdev)
|
|||
return irq;
|
||||
|
||||
/* For RTC supply test */
|
||||
err = ab8500_set_bits(ab8500, AB8500_RTC_STAT_REG, RTC_STATUS_DATA,
|
||||
RTC_STATUS_DATA);
|
||||
err = abx500_mask_and_set_register_interruptible(&pdev->dev, AB8500_RTC,
|
||||
AB8500_RTC_STAT_REG, RTC_STATUS_DATA, RTC_STATUS_DATA);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
/* Wait for reset by the PorRtc */
|
||||
msleep(1);
|
||||
|
||||
rtc_ctrl = ab8500_read(ab8500, AB8500_RTC_STAT_REG);
|
||||
if (rtc_ctrl < 0)
|
||||
return rtc_ctrl;
|
||||
err = abx500_get_register_interruptible(&pdev->dev, AB8500_RTC,
|
||||
AB8500_RTC_STAT_REG, &rtc_ctrl);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
/* Check if the RTC Supply fails */
|
||||
if (!(rtc_ctrl & RTC_STATUS_DATA)) {
|
||||
|
|
|
|||
|
|
@ -9,6 +9,29 @@
|
|||
|
||||
#include <linux/device.h>
|
||||
|
||||
/*
|
||||
* AB8500 bank addresses
|
||||
*/
|
||||
#define AB8500_SYS_CTRL1_BLOCK 0x1
|
||||
#define AB8500_SYS_CTRL2_BLOCK 0x2
|
||||
#define AB8500_REGU_CTRL1 0x3
|
||||
#define AB8500_REGU_CTRL2 0x4
|
||||
#define AB8500_USB 0x5
|
||||
#define AB8500_TVOUT 0x6
|
||||
#define AB8500_DBI 0x7
|
||||
#define AB8500_ECI_AV_ACC 0x8
|
||||
#define AB8500_RESERVED 0x9
|
||||
#define AB8500_GPADC 0xA
|
||||
#define AB8500_CHARGER 0xB
|
||||
#define AB8500_GAS_GAUGE 0xC
|
||||
#define AB8500_AUDIO 0xD
|
||||
#define AB8500_INTERRUPT 0xE
|
||||
#define AB8500_RTC 0xF
|
||||
#define AB8500_MISC 0x10
|
||||
#define AB8500_DEBUG 0x12
|
||||
#define AB8500_PROD_TEST 0x13
|
||||
#define AB8500_OTP_EMUL 0x15
|
||||
|
||||
/*
|
||||
* Interrupts
|
||||
*/
|
||||
|
|
@ -99,6 +122,7 @@ struct ab8500 {
|
|||
int revision;
|
||||
int irq_base;
|
||||
int irq;
|
||||
u8 chip_id;
|
||||
|
||||
int (*write) (struct ab8500 *a8500, u16 addr, u8 data);
|
||||
int (*read) (struct ab8500 *a8500, u16 addr);
|
||||
|
|
@ -124,10 +148,6 @@ struct ab8500_platform_data {
|
|||
struct regulator_init_data *regulator[AB8500_NUM_REGULATORS];
|
||||
};
|
||||
|
||||
extern int ab8500_write(struct ab8500 *a8500, u16 addr, u8 data);
|
||||
extern int ab8500_read(struct ab8500 *a8500, u16 addr);
|
||||
extern int ab8500_set_bits(struct ab8500 *a8500, u16 addr, u8 mask, u8 data);
|
||||
|
||||
extern int __devinit ab8500_init(struct ab8500 *ab8500);
|
||||
extern int __devexit ab8500_exit(struct ab8500 *ab8500);
|
||||
|
||||
|
|
|
|||
|
|
@ -6,8 +6,7 @@
|
|||
*
|
||||
* ABX500 core access functions.
|
||||
* The abx500 interface is used for the Analog Baseband chip
|
||||
* ab3100, ab3550, ab5500 and possibly comming. It is not used for
|
||||
* ab4500 and ab8500 since they are another family of chip.
|
||||
* ab3100, ab3550, ab5500, and ab8500.
|
||||
*
|
||||
* Author: Mattias Wallin <mattias.wallin@stericsson.com>
|
||||
* Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче