microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

habanalabs: load CPU device boot loader from host 

Load CPU device boot loader during driver boot time in order to avoid flash
write for every boot loader update.

To preserve backward-compatibility, skip the device boot load if the device
doesn't request it.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This commit is contained in:
Ofir Bitton 2020-04-16 13:47:15 +03:00 коммит произвёл Oded Gabbay
Родитель 39b425170d
Коммит 47f6b41cdd
4 изменённых файлов: 79 добавлений и 75 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

54
drivers/misc/habanalabs/firmware_if.c
Просмотреть файл

@ -328,8 +328,9 @@ static void fw_read_errors(struct hl_device *hdev, u32 boot_err0_reg)
}
int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
u32 msg_to_cpu_reg, u32 boot_err0_reg, bool skip_bmc,
u32 cpu_timeout)
u32 msg_to_cpu_reg, u32 cpu_msg_status_reg,
u32 boot_err0_reg, bool skip_bmc,
u32 cpu_timeout, u32 boot_fit_timeout)
{
u32 status;
int rc;
@ -337,6 +338,48 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
dev_info(hdev->dev, "Going to wait for device boot (up to %lds)\n",
cpu_timeout / USEC_PER_SEC);
/* Wait for boot FIT request */
rc = hl_poll_timeout(
hdev,
cpu_boot_status_reg,
status,
status == CPU_BOOT_STATUS_WAITING_FOR_BOOT_FIT,
10000,
boot_fit_timeout);
if (rc) {
dev_dbg(hdev->dev,
"No boot fit request received, resuming boot\n");
} else {
rc = hdev->asic_funcs->load_boot_fit_to_device(hdev);
if (rc)
goto out;
/* Clear device CPU message status */
WREG32(cpu_msg_status_reg, CPU_MSG_CLR);
/* Signal device CPU that boot loader is ready */
WREG32(msg_to_cpu_reg, KMD_MSG_FIT_RDY);
/* Poll for CPU device ack */
rc = hl_poll_timeout(
hdev,
cpu_msg_status_reg,
status,
status == CPU_MSG_OK,
10000,
boot_fit_timeout);
if (rc) {
dev_err(hdev->dev,
"Timeout waiting for boot fit load ack\n");
goto out;
}
/* Clear message */
WREG32(msg_to_cpu_reg, KMD_MSG_NA);
}
/* Make sure CPU boot-loader is running */
rc = hl_poll_timeout(
hdev,
@ -396,7 +439,8 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
break;
default:
dev_err(hdev->dev,
"Device boot error - Invalid status code\n");
"Device boot error - Invalid status code %d\n",
status);
break;
}
@ -450,6 +494,9 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
10000,
cpu_timeout);
/* Clear message */
WREG32(msg_to_cpu_reg, KMD_MSG_NA);
if (rc) {
if (status == CPU_BOOT_STATUS_FIT_CORRUPTED)
dev_err(hdev->dev,
@ -458,7 +505,6 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
dev_err(hdev->dev,
"Device failed to load, %d\n", status);
WREG32(msg_to_cpu_reg, KMD_MSG_NA);
rc = -EIO;
goto out;
}

90
drivers/misc/habanalabs/goya/goya.c
Просмотреть файл

@ -72,7 +72,7 @@
*
*/
#define GOYA_UBOOT_FW_FILE "habanalabs/goya/goya-u-boot.bin"
#define GOYA_BOOT_FIT_FILE "habanalabs/goya/goya-boot-fit.itb"
#define GOYA_LINUX_FW_FILE "habanalabs/goya/goya-fit.itb"
#define GOYA_MMU_REGS_NUM 63
@ -87,6 +87,7 @@
#define GOYA_TEST_QUEUE_WAIT_USEC 100000 /* 100ms */
#define GOYA_PLDM_MMU_TIMEOUT_USEC (MMU_CONFIG_TIMEOUT_USEC * 100)
#define GOYA_PLDM_QMAN0_TIMEOUT_USEC (HL_DEVICE_TIMEOUT_USEC * 30)
#define GOYA_BOOT_FIT_REQ_TIMEOUT_USEC 1000000 /* 1s */
#define GOYA_QMAN0_FENCE_VAL 0xD169B243
@ -2209,23 +2210,6 @@ static void goya_halt_engines(struct hl_device *hdev, bool hard_reset)
}
}
/*
* goya_push_uboot_to_device() - Push u-boot FW code to device.
* @hdev: Pointer to hl_device structure.
*
* Copy u-boot fw code from firmware file to SRAM BAR.
*
* Return: 0 on success, non-zero for failure.
*/
static int goya_push_uboot_to_device(struct hl_device *hdev)
{
void __iomem *dst;
dst = hdev->pcie_bar[SRAM_CFG_BAR_ID] + UBOOT_FW_OFFSET;
return hl_fw_load_fw_to_device(hdev, GOYA_UBOOT_FW_FILE, dst);
}
/*
* goya_load_firmware_to_device() - Load LINUX FW code to device.
* @hdev: Pointer to hl_device structure.
@ -2243,47 +2227,21 @@ static int goya_load_firmware_to_device(struct hl_device *hdev)
return hl_fw_load_fw_to_device(hdev, GOYA_LINUX_FW_FILE, dst);
}
static int goya_pldm_init_cpu(struct hl_device *hdev)
/*
* goya_load_boot_fit_to_device() - Load boot fit to device.
* @hdev: Pointer to hl_device structure.
*
* Copy boot fit file to SRAM BAR.
*
* Return: 0 on success, non-zero for failure.
*/
static int goya_load_boot_fit_to_device(struct hl_device *hdev)
{
u32 unit_rst_val;
int rc;
void __iomem *dst;
/* Must initialize SRAM scrambler before pushing u-boot to SRAM */
goya_init_golden_registers(hdev);
dst = hdev->pcie_bar[SRAM_CFG_BAR_ID] + BOOT_FIT_SRAM_OFFSET;
/* Put ARM cores into reset */
WREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL, CPU_RESET_ASSERT);
RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
/* Reset the CA53 MACRO */
unit_rst_val = RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
WREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N, CA53_RESET);
RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
WREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N, unit_rst_val);
RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
rc = goya_push_uboot_to_device(hdev);
if (rc)
return rc;
rc = goya_load_firmware_to_device(hdev);
if (rc)
return rc;
WREG32(mmPSOC_GLOBAL_CONF_UBOOT_MAGIC, KMD_MSG_FIT_RDY);
WREG32(mmPSOC_GLOBAL_CONF_WARM_REBOOT, CPU_BOOT_STATUS_NA);
WREG32(mmCPU_CA53_CFG_RST_ADDR_LSB_0,
lower_32_bits(SRAM_BASE_ADDR + UBOOT_FW_OFFSET));
WREG32(mmCPU_CA53_CFG_RST_ADDR_MSB_0,
upper_32_bits(SRAM_BASE_ADDR + UBOOT_FW_OFFSET));
/* Release ARM core 0 from reset */
WREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL,
CPU_RESET_CORE0_DEASSERT);
RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
return 0;
return hl_fw_load_fw_to_device(hdev, GOYA_BOOT_FIT_FILE, dst);
}
/*
@ -2325,7 +2283,7 @@ static void goya_read_device_fw_version(struct hl_device *hdev,
}
}
static int goya_init_cpu(struct hl_device *hdev, u32 cpu_timeout)
static int goya_init_cpu(struct hl_device *hdev)
{
struct goya_device *goya = hdev->asic_specific;
int rc;
@ -2346,22 +2304,15 @@ static int goya_init_cpu(struct hl_device *hdev, u32 cpu_timeout)
return -EIO;
}
if (hdev->pldm) {
rc = goya_pldm_init_cpu(hdev);
if (rc)
return rc;
goto out;
}
rc = hl_fw_init_cpu(hdev, mmPSOC_GLOBAL_CONF_CPU_BOOT_STATUS,
mmPSOC_GLOBAL_CONF_UBOOT_MAGIC, mmCPU_BOOT_ERR0,
false, cpu_timeout);
mmPSOC_GLOBAL_CONF_UBOOT_MAGIC,
mmCPU_CMD_STATUS_TO_HOST, mmCPU_BOOT_ERR0,
false, GOYA_CPU_TIMEOUT_USEC,
GOYA_BOOT_FIT_REQ_TIMEOUT_USEC);
if (rc)
return rc;
out:
goya->hw_cap_initialized |= HW_CAP_CPU;
return 0;
@ -2476,7 +2427,7 @@ static int goya_hw_init(struct hl_device *hdev)
*/
WREG32(mmHW_STATE, HL_DEVICE_HW_STATE_DIRTY);
rc = goya_init_cpu(hdev, GOYA_CPU_TIMEOUT_USEC);
rc = goya_init_cpu(hdev);
if (rc) {
dev_err(hdev->dev, "failed to initialize CPU\n");
return rc;
@ -5270,6 +5221,7 @@ static const struct hl_asic_funcs goya_funcs = {
.get_queue_id_for_cq = goya_get_queue_id_for_cq,
.read_device_fw_version = goya_read_device_fw_version,
.load_firmware_to_device = goya_load_firmware_to_device,
.load_boot_fit_to_device = goya_load_boot_fit_to_device,
.set_dma_mask_from_fw = goya_set_dma_mask_from_fw,
.get_device_time = goya_get_device_time
};

7
drivers/misc/habanalabs/habanalabs.h
Просмотреть файл

@ -552,6 +552,7 @@ enum hl_pll_frequency {
* @read_device_fw_version: read the device's firmware versions that are
* contained in registers
* @load_firmware_to_device: load the firmware to the device's memory
* @load_boot_fit_to_device: load boot fit to device's memory
* @set_dma_mask_from_fw: set the DMA mask in the driver according to the
* firmware configuration
* @get_device_time: Get the device time.
@ -646,6 +647,7 @@ struct hl_asic_funcs {
void (*read_device_fw_version)(struct hl_device *hdev,
enum hl_fw_component fwc);
int (*load_firmware_to_device)(struct hl_device *hdev);
int (*load_boot_fit_to_device)(struct hl_device *hdev);
void (*set_dma_mask_from_fw)(struct hl_device *hdev);
u64 (*get_device_time)(struct hl_device *hdev);
};
@ -1644,8 +1646,9 @@ int hl_fw_send_heartbeat(struct hl_device *hdev);
int hl_fw_armcp_info_get(struct hl_device *hdev);
int hl_fw_get_eeprom_data(struct hl_device *hdev, void *data, size_t max_size);
int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
u32 msg_to_cpu_reg, u32 boot_err0_reg, bool skip_bmc,
u32 cpu_timeout);
u32 msg_to_cpu_reg, u32 cpu_msg_status_reg,
u32 boot_err0_reg, bool skip_bmc,
u32 cpu_timeout, u32 boot_fit_timeout);
int hl_pci_bars_map(struct hl_device *hdev, const char * const name[3],
bool is_wc[3]);

3
drivers/misc/habanalabs/include/hl_boot_if.h
Просмотреть файл

@ -11,6 +11,8 @@
#define LKD_HARD_RESET_MAGIC 0xED7BD694
#define HL_POWER9_HOST_MAGIC 0x1DA30009
#define BOOT_FIT_SRAM_OFFSET 0x200000
/*
* CPU error bits in BOOT_ERROR registers
*
@ -77,6 +79,7 @@ enum cpu_boot_status {
CPU_BOOT_STATUS_BMC_WAITING_SKIPPED, /* deprecated - will be removed */
/* Last boot loader progress status, ready to receive commands */
CPU_BOOT_STATUS_READY_TO_BOOT = 15,
CPU_BOOT_STATUS_WAITING_FOR_BOOT_FIT = 16,
};
enum kmd_msg {