From 48242e30532b3e30f93f124c214b4308ab267e05 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 16 Apr 2019 22:07:54 +0200 Subject: [PATCH] usb: typec: fusb302: Revert "Resolve fixed power role contract setup" Some tcpc device-drivers need to explicitly be told to watch for connection events, otherwise the tcpc will not generate any TCPM_CC_EVENTs and devices being plugged into the Type-C port will not be noticed. For dual-role ports tcpm_start_drp_toggling() is used to tell the tcpc to watch for connection events. But for single-role ports we've so far been falling back to just calling tcpm_set_cc(). For some tcpc-s such as the fusb302 this is not enough and no TCPM_CC_EVENT will be generated. Commit ea3b4d5523bc ("usb: typec: fusb302: Resolve fixed power role contract setup") fixed SRPs not working because of this by making the fusb302 driver start connection detection on every tcpm_set_cc() call. It turns out this breaks src->snk power-role swapping because during the swap we first set the Cc pins to Rp, calling set_cc, and then send a PS_RDY message. But the fusb302 cannot send PD messages while its toggling engine is active, so sending the PS_RDY message fails. Struct tcpc_dev now has a new start_srp_connection_detect callback and fusb302.c now implements this. This callback gets called when we the fusb302 needs to start connection detection, fixing fusb302 SRPs not seeing connected devices. This allows us to revert the changes to fusb302's set_cc implementation, making it once again purely setup the Cc-s and matching disconnect detection, fixing src->snk power-role swapping no longer working. Note that since the code was refactored in between, codewise this is not a straight forward revert. Functionality wise this is a straight revert and the original functionality is fully restored. Fixes: ea3b4d5523bc ("usb: typec: fusb302: Resolve fixed power role ...") Cc: Adam Thomson Signed-off-by: Hans de Goede Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Tested-by: Adam Thomson Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/fusb302.c | 55 ++++++++++++++++++++++++++------ 1 file changed, 46 insertions(+), 9 deletions(-) diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index b102a15ff958..7302f7501ec9 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -606,19 +606,16 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc) FUSB_REG_SWITCHES0_CC2_PU_EN | FUSB_REG_SWITCHES0_CC1_PD_EN | FUSB_REG_SWITCHES0_CC2_PD_EN; - u8 switches0_data = 0x00; + u8 rd_mda, switches0_data = 0x00; int ret = 0; - enum toggling_mode mode; mutex_lock(&chip->lock); switch (cc) { case TYPEC_CC_OPEN: - mode = TOGGLING_MODE_OFF; break; case TYPEC_CC_RD: switches0_data |= FUSB_REG_SWITCHES0_CC1_PD_EN | FUSB_REG_SWITCHES0_CC2_PD_EN; - mode = TOGGLING_MODE_SNK; break; case TYPEC_CC_RP_DEF: case TYPEC_CC_RP_1_5: @@ -626,7 +623,6 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc) switches0_data |= (chip->cc_polarity == TYPEC_POLARITY_CC1) ? FUSB_REG_SWITCHES0_CC1_PU_EN : FUSB_REG_SWITCHES0_CC2_PU_EN; - mode = TOGGLING_MODE_SRC; break; default: fusb302_log(chip, "unsupported cc value %s", @@ -637,6 +633,12 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc) fusb302_log(chip, "cc := %s", typec_cc_status_name[cc]); + ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF); + if (ret < 0) { + fusb302_log(chip, "cannot set toggling mode, ret=%d", ret); + goto done; + } + ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0, switches0_mask, switches0_data); if (ret < 0) { @@ -655,10 +657,45 @@ static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc) goto done; } - ret = fusb302_set_toggling(chip, mode); - if (ret < 0) - fusb302_log(chip, "cannot set toggling mode, ret=%d", ret); - + /* enable/disable interrupts, BC_LVL for SNK and COMP_CHNG for SRC */ + switch (cc) { + case TYPEC_CC_RP_DEF: + case TYPEC_CC_RP_1_5: + case TYPEC_CC_RP_3_0: + rd_mda = rd_mda_value[cc_src_current[cc]]; + ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda); + if (ret < 0) { + fusb302_log(chip, + "cannot set SRC measure value, ret=%d", + ret); + goto done; + } + ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK, + FUSB_REG_MASK_BC_LVL | + FUSB_REG_MASK_COMP_CHNG, + FUSB_REG_MASK_COMP_CHNG); + if (ret < 0) { + fusb302_log(chip, "cannot set SRC interrupt, ret=%d", + ret); + goto done; + } + chip->intr_comp_chng = true; + break; + case TYPEC_CC_RD: + ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK, + FUSB_REG_MASK_BC_LVL | + FUSB_REG_MASK_COMP_CHNG, + FUSB_REG_MASK_BC_LVL); + if (ret < 0) { + fusb302_log(chip, "cannot set SRC interrupt, ret=%d", + ret); + goto done; + } + chip->intr_bc_lvl = true; + break; + default: + break; + } done: mutex_unlock(&chip->lock);