microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

ARM: 64-bit DT updates for v4.10 

A couple of interesting new SoC platforms are now supported, these are
 the respective DTS sources:
 
 - Samsung Exynos5433 mobile phone platform, including an (almost) fully
   supported phone reference board.
 - Hisilicon Hip07 server platform and D05 board, the latest iteration
   of their product line, now with 64 Cortex-A72 cores across two
   sockets.
 - Allwinner A64 SoC, the first 64-bit chip from their "sunxi" product
   line, used in Android tablets and ultra-cheap development boards
 - NXP LS1046A Communication processor, improving on the earlier LS1043A
   with faster CPU cores
 - Qualcomm MSM8992 (Snapdragon 808) and MSM8994 (Snapdragon 810)
   mobile phone SoCs
 - Early support for the Nvidia Tegra Tegra186 SoC
 - Amlogic S905D is a minor variant of their existing Android consumer
   product line
 - Rockchip PX5 automotive platform, a close relative of their popular
   rk3368 Android tablet chips
 
 Aside from the respective evaluation platforms for the above
 chips, there are only a few consumer devices and boards added
 this time:
 
 - Huawei Nexus 6P (Angler) mobile phone
 - LG Nexus 5x (Bullhead) mobile phone
 - Nexbox A1 and A95X Android TV boxes
 - Pine64 development board based on Allwinner A64
 - Globalscale Marvell ESPRESSOBin community board based on Armada 3700
 - Renesas "R-Car Starter Kit Pro" (M3ULCB) low-cost automotive  board
 
 For the existing platforms, we get bug fixes and new peripheral support
 for Juno, Renesas, Uniphier, Amlogic, Samsung, Broadcom, Rockchip, Berlin,
 and ZTE.
 
 Conflicts:
 - Documentation/devicetree/bindings/arm/shmobile.txt: a
   rename/add conflict, keep both modifications and maintain
   alphabetical ordering.
 - arch/arm64/boot/dts/*/*.dtsi: nodes were added in netdev,
   mmc and clk, keep both sides in each case.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWFMYq2CrR//JCVInAQJ38BAAzKC2AmZw2U5t8de1RuC7OOefHnWxzXaI
 hpH5sLLIF10D52VrztqG2EauQWa2K0OYpkO5Up+d8WVdRm6dL2Y9wTMOhdadqWmb
 zPthdGuSpI6yRiST51Umr1pvt5rm/0KYMAiP1B1ySIWCeOyxFmm9er6ZU3By6kbx
 bbXEzY2vs22GJ3+rNxYOVGm1hlhgBaoYnkth2AIXwiGt5OUn4yDs/17+WqNZlg7S
 Bj9vdvn+A/IeiaGZGRUn8J2HxUCeIxJzwntKJyoRfVu6BH+qlrPLhFh/N3Ttzb+3
 Xjh+uQgikEp/2pkaq6oNJLATOXCAL8+UIAL+ZMJ1jiVI7Q1WBQITj14QgNgbkupX
 1Bg25eS3I3HSmOg1tnUeEzF3N3hK8jlb9lA0HZm9m6RuegFsVIGHfte7xOdRbZki
 dHAVy0xAoBPoXWnUfoekc1/L4AfsBh57GfbIBhf+xZs2eKp7Jw22eVwc9YsdDpc1
 3s6aEbAsQWU7IgSWWEOJMi/q7Z6By7db3dIGLqtwszVvqzjkcszXQZSxjaOHlseK
 j6Ci6yQ3UeG05QviySFyVsOxfHrL5SczYexsbkKE/kXfQZXR7x+GQzjm/BwYvEkO
 Q+gHAbGBI5IM6hTBDLnHkn+WkXYk3EhyTcFykxs2ykJhWsOd9ReBuCTxr4Wey40U
 Q80HYHv/leY=
 =geT0
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "A couple of interesting new SoC platforms are now supported, these are
  the respective DTS sources:

   - Samsung Exynos5433 mobile phone platform, including an (almost)
     fully supported phone reference board.
   - Hisilicon Hip07 server platform and D05 board, the latest iteration
     of their product line, now with 64 Cortex-A72 cores across two
     sockets.
   - Allwinner A64 SoC, the first 64-bit chip from their "sunxi" product
     line, used in Android tablets and ultra-cheap development boards
   - NXP LS1046A Communication processor, improving on the earlier
     LS1043A with faster CPU cores
   - Qualcomm MSM8992 (Snapdragon 808) and MSM8994 (Snapdragon 810)
     mobile phone SoCs
   - Early support for the Nvidia Tegra Tegra186 SoC
   - Amlogic S905D is a minor variant of their existing Android consumer
     product line
   - Rockchip PX5 automotive platform, a close relative of their popular
     rk3368 Android tablet chips

  Aside from the respective evaluation platforms for the above chips,
  there are only a few consumer devices and boards added this time:

   - Huawei Nexus 6P (Angler) mobile phone
   - LG Nexus 5x (Bullhead) mobile phone
   - Nexbox A1 and A95X Android TV boxes
   - Pine64 development board based on Allwinner A64
   - Globalscale Marvell ESPRESSOBin community board based on Armada 3700
   - Renesas "R-Car Starter Kit Pro" (M3ULCB) low-cost automotive board

  For the existing platforms, we get bug fixes and new peripheral
  support for Juno, Renesas, Uniphier, Amlogic, Samsung, Broadcom,
  Rockchip, Berlin, and ZTE"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (168 commits)
  arm64: dts: fix build errors from missing dependencies
  ARM64: dts: meson-gxbb: add SCPI pre-1.0 compatible
  ARM64: dts: meson-gxl: Add support for Nexbox A95X
  ARM64: dts: meson-gxm: Add support for the Nexbox A1
  ARM: dts: artpec: add pcie support
  arm64: dts: berlin4ct-dmp: add missing unit name to /memory node
  arm64: dts: berlin4ct-stb: add missing unit name to /memory node
  arm64: dts: berlin4ct: add missing unit name to /soc node
  arm64: dts: qcom: msm8916: Add ddr support to sdhc1
  arm64: dts: exynos: Enable HS400 mode for eMMC for TM2
  ARM: dts: Add xo to sdhc clock node on qcom platforms
  ARM64: dts: Add support for Meson GXM
  dt-bindings: add rockchip RK1108 Evaluation board
  arm64: dts: NS2: Add PCI PHYs
  arm64: dts: NS2: enable sdio1
  arm64: dts: exynos: Add the mshc_2 node for supporting T-Flash
  arm64: tegra: Add NVIDIA P2771 board support
  arm64: tegra: Enable PSCI on P3310
  arm64: tegra: Add NVIDIA P3310 processor module support
  arm64: tegra: Add GPIO controllers on Tegra186
  ...
This commit is contained in:
Linus Torvalds 2016-12-15 15:58:28 -08:00
Родитель 786a72d791 09a566514c
Коммит 482c3e8835
118 изменённых файлов: 12175 добавлений и 737 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

19
Documentation/devicetree/bindings/arm/amlogic.txt
Просмотреть файл

@ -17,6 +17,18 @@ Boards with the Amlogic Meson GXBaby SoC shall have the following properties:
Required root node property:
compatible: "amlogic,meson-gxbb";
Boards with the Amlogic Meson GXL S905X SoC shall have the following properties:
Required root node property:
compatible: "amlogic,s905x", "amlogic,meson-gxl";
Boards with the Amlogic Meson GXL S905D SoC shall have the following properties:
Required root node property:
compatible: "amlogic,s905d", "amlogic,meson-gxl";
Boards with the Amlogic Meson GXM S912 SoC shall have the following properties:
Required root node property:
compatible: "amlogic,s912", "amlogic,meson-gxm";
Board compatible values:
- "geniatech,atv1200" (Meson6)
- "minix,neo-x8" (Meson8)
@ -28,3 +40,10 @@ Board compatible values:
- "hardkernel,odroid-c2" (Meson gxbb)
- "amlogic,p200" (Meson gxbb)
- "amlogic,p201" (Meson gxbb)
- "amlogic,p212" (Meson gxl s905x)
- "amlogic,p230" (Meson gxl s905d)
- "amlogic,p231" (Meson gxl s905d)
- "amlogic,q200" (Meson gxm s912)
- "amlogic,q201" (Meson gxm s912)
- "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
- "nexbox,a1" (Meson gxm s912)

0
Documentation/devicetree/bindings/arm/bcm/ns2.txt → Documentation/devicetree/bindings/arm/bcm/brcm,ns2.txt
Просмотреть файл

34
Documentation/devicetree/bindings/arm/fsl.txt
Просмотреть файл

@ -97,7 +97,7 @@ Freescale LS1021A Platform Device Tree Bindings
Required root node compatible properties:
- compatible = "fsl,ls1021a";
Freescale LS1021A SoC-specific Device Tree Bindings
Freescale SoC-specific Device Tree Bindings
-------------------------------------------
Freescale SCFG
@ -105,7 +105,11 @@ Freescale SCFG
configuration and status registers for the chip. Such as getting PEX port
status.
Required properties:
- compatible: should be "fsl,ls1021a-scfg"
- compatible: Should contain a chip-specific compatible string,
Chip-specific strings are of the form "fsl,<chip>-scfg",
The following <chip>s are known to be supported:
ls1021a, ls1043a, ls1046a, ls2080a.
- reg: should contain base address and length of SCFG memory-mapped registers
Example:
@ -119,7 +123,11 @@ Freescale DCFG
configuration and status for the device. Such as setting the secondary
core start address and release the secondary core from holdoff and startup.
Required properties:
- compatible: should be "fsl,ls1021a-dcfg"
- compatible: Should contain a chip-specific compatible string,
Chip-specific strings are of the form "fsl,<chip>-dcfg",
The following <chip>s are known to be supported:
ls1021a, ls1043a, ls1046a, ls2080a.
- reg : should contain base address and length of DCFG memory-mapped registers
Example:
@ -131,6 +139,10 @@ Example:
Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
----------------------------------------------------------------
LS1043A SoC
Required root node properties:
- compatible = "fsl,ls1043a";
LS1043A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
@ -139,6 +151,22 @@ LS1043A ARMv8 based QDS Board
Required root node properties:
- compatible = "fsl,ls1043a-qds", "fsl,ls1043a";
LS1046A SoC
Required root node properties:
- compatible = "fsl,ls1046a";
LS1046A ARMv8 based QDS Board
Required root node properties:
- compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
LS1046A ARMv8 based RDB Board
Required root node properties:
- compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
LS2080A SoC
Required root node properties:
- compatible = "fsl,ls2080a";
LS2080A ARMv8 based Simulator model
Required root node properties:
- compatible = "fsl,ls2080a-simu", "fsl,ls2080a";

4
Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
Просмотреть файл

@ -28,6 +28,10 @@ HiP06 D03 Board
Required root node properties:
- compatible = "hisilicon,hip06-d03";
HiP07 D05 Board
Required root node properties:
- compatible = "hisilicon,hip07-d05";
Hisilicon system controller
Required properties:

2
Documentation/devicetree/bindings/arm/qcom.txt
Просмотреть файл

@ -21,6 +21,8 @@ The 'SoC' element must be one of the following strings:
apq8096
msm8916
msm8974
msm8992
msm8994
msm8996
mdm9615

12
Documentation/devicetree/bindings/arm/rockchip.txt
Просмотреть файл

@ -103,6 +103,18 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "mqmaker,miqi", "rockchip,rk3288";
- Rockchip PX3 Evaluation board:
Required root node properties:
- compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
- Rockchip PX5 Evaluation board:
Required root node properties:
- compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
- Rockchip RK1108 Evaluation board
Required root node properties:
- compatible = "rockchip,rk1108-evb", "rockchip,rk1108";
- Rockchip RK3368 evb:
Required root node properties:
- compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368";

2
Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
Просмотреть файл

@ -15,6 +15,8 @@ Required root node properties:
- "samsung,xyref5260" - for Exynos5260-based Samsung board.
- "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
- "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
- "samsung,tm2" - for Exynos5433-based Samsung TM2 board.
- "samsung,tm2e" - for Exynos5433-based Samsung TM2E board.
- "samsung,sd5v1" - for Exynos5440-based Samsung board.
- "samsung,ssdk5440" - for Exynos5440-based Samsung board.

4
Documentation/devicetree/bindings/arm/shmobile.txt
Просмотреть файл

@ -53,7 +53,7 @@ Boards:
compatible = "renesas,genmai", "renesas,r7s72100"
- Gose (RTP0RC7793SEB00010S)
compatible = "renesas,gose", "renesas,r8a7793"
- H3ULCB (RTP0RC7795SKB00010S)
- H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKB00010S)
compatible = "renesas,h3ulcb", "renesas,r8a7795";
- Henninger
compatible = "renesas,henninger", "renesas,r8a7791"
@ -65,6 +65,8 @@ Boards:
compatible = "renesas,kzm9g", "renesas,sh73a0"
- Lager (RTP0RC7790SEB00010S)
compatible = "renesas,lager", "renesas,r8a7790"
- M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKB00010S)
compatible = "renesas,m3ulcb", "renesas,r8a7796";
- Marzen (R0P7779A00010S)
compatible = "renesas,marzen", "renesas,r8a7779"
- Porter (M2-LCDP)

1
Documentation/devicetree/bindings/arm/sunxi.txt
Просмотреть файл

@ -14,4 +14,5 @@ using one of the following compatible strings:
allwinner,sun8i-a83t
allwinner,sun8i-h3
allwinner,sun9i-a80
allwinner,sun50i-a64
nextthing,gr8

2
Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
Просмотреть файл

@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller
Required properties:
- reg: Physical base address and size of the controller's register area.
- compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
chip could be ls1021a, ls2080a, ls1043a etc.
chip could be ls1021a, ls1043a, ls1046a, ls2080a etc.
- clocks: Input clock specifier. Refer to common clock bindings.
- interrupts: Interrupt specifier. Refer to interrupt binding.

3
Documentation/devicetree/bindings/clock/qoriq-clock.txt
Просмотреть файл

@ -32,6 +32,9 @@ Required properties:
* "fsl,b4420-clockgen"
* "fsl,b4860-clockgen"
* "fsl,ls1021a-clockgen"
* "fsl,ls1043a-clockgen"
* "fsl,ls1046a-clockgen"
* "fsl,ls2080a-clockgen"
Chassis-version clock strings include:
* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks

2
Documentation/devicetree/bindings/i2c/trivial-devices.txt
Просмотреть файл

@ -138,6 +138,8 @@ nuvoton,npct501 i2c trusted platform module (TPM)
nuvoton,npct601 i2c trusted platform module (TPM2)
nxp,pca9556 Octal SMBus and I2C registered interface
nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset
nxp,pcf2127 Real-time clock
nxp,pcf2129 Real-time clock
nxp,pcf8563 Real-time clock/calendar
nxp,pcf85063 Tiny Real-Time Clock
oki,ml86v7667 OKI ML86V7667 video decoder

8
Documentation/devicetree/bindings/media/renesas,fcp.txt
Просмотреть файл

@ -11,15 +11,9 @@ are paired with. These DT bindings currently support the FCPV and FCPF.
- compatible: Must be one or more of the following
- "renesas,r8a7795-fcpv" for R8A7795 (R-Car H3) compatible 'FCP for VSP'
- "renesas,r8a7795-fcpf" for R8A7795 (R-Car H3) compatible 'FCP for FDP'
- "renesas,fcpv" for generic compatible 'FCP for VSP'
- "renesas,fcpf" for generic compatible 'FCP for FDP'
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first, followed by the
family-specific and/or generic versions.
- reg: the register base and size for the device registers
- clocks: Reference to the functional clock
@ -32,7 +26,7 @@ Device node example
-------------------
fcpvd1: fcp@fea2f000 {
compatible = "renesas,r8a7795-fcpv", "renesas,fcpv";
compatible = "renesas,fcpv";
reg = <0 0xfea2f000 0 0x200>;
clocks = <&cpg CPG_MOD 602>;
power-domains = <&sysc R8A7795_PD_A3VP>;

2
Documentation/devicetree/bindings/vendor-prefixes.txt
Просмотреть файл

@ -197,6 +197,7 @@ neonode Neonode Inc.
netgear NETGEAR
netlogic Broadcom Corporation (formerly NetLogic Microsystems)
netxeon Shenzhen Netxeon Technology CO., LTD
nexbox Nexbox
newhaven Newhaven Display International
ni National Instruments
nintendo Nintendo
@ -222,6 +223,7 @@ parade Parade Technologies Inc.
pericom Pericom Technology Inc.
phytec PHYTEC Messtechnik GmbH
picochip Picochip Ltd
pine64 Pine64
pixcir PIXCIR MICROELECTRONICS Co., Ltd
plathome Plat'Home Co., Ltd.
plda PLDA

1
MAINTAINERS
Просмотреть файл

@ -1042,6 +1042,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
N: sun[x456789]i
F: arch/arm/boot/dts/ntc-gr8*
F: arch/arm64/boot/dts/allwinner/
ARM/Allwinner SoC Clock Support
M: Emilio López <emilio@elopez.com.ar>

1
arch/arm64/boot/dts/Makefile
Просмотреть файл

@ -1,4 +1,5 @@
dts-dirs += al
dts-dirs += allwinner
dts-dirs += altera
dts-dirs += amd
dts-dirs += amlogic

5
arch/arm64/boot/dts/allwinner/Makefile Normal file
Просмотреть файл

@ -0,0 +1,5 @@
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb

50
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts Normal file
Просмотреть файл

@ -0,0 +1,50 @@
/*
* Copyright (c) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "sun50i-a64-pine64.dts"
/ {
model = "Pine64+";
compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
/* TODO: Camera, Ethernet PHY, touchscreen, etc. */
};

74
arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts Normal file
Просмотреть файл

@ -0,0 +1,74 @@
/*
* Copyright (c) 2016 ARM Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun50i-a64.dtsi"
/ {
model = "Pine64";
compatible = "pine64,pine64", "allwinner,sun50i-a64";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
&i2c1_pins {
bias-pull-up;
};

261
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi Normal file
Просмотреть файл

@ -0,0 +1,261 @@
/*
* Copyright (C) 2016 ARM Ltd.
* based on the Allwinner H3 dtsi:
* Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <0>;
enable-method = "psci";
};
cpu1: cpu@1 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <1>;
enable-method = "psci";
};
cpu2: cpu@2 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <2>;
enable-method = "psci";
};
cpu3: cpu@3 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
reg = <3>;
enable-method = "psci";
};
};
osc24M: osc24M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
osc32k: osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ccu: clock@01c20000 {
compatible = "allwinner,sun50i-a64-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
};
pio: pinctrl@1c20800 {
compatible = "allwinner,sun50i-a64-pinctrl";
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu 58>;
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
#interrupt-cells = <3>;
i2c1_pins: i2c1_pins {
pins = "PH2", "PH3";
function = "i2c1";
};
uart0_pins_a: uart0@0 {
pins = "PB8", "PB9";
function = "uart0";
};
};
uart0: serial@1c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu 67>;
resets = <&ccu 46>;
status = "disabled";
};
uart1: serial@1c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu 68>;
resets = <&ccu 47>;
status = "disabled";
};
uart2: serial@1c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu 69>;
resets = <&ccu 48>;
status = "disabled";
};
uart3: serial@1c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu 70>;
resets = <&ccu 49>;
status = "disabled";
};
uart4: serial@1c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&ccu 71>;
resets = <&ccu 50>;
status = "disabled";
};
i2c0: i2c@1c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu 63>;
resets = <&ccu 42>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@1c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu 64>;
resets = <&ccu 43>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
i2c2: i2c@1c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu 65>;
resets = <&ccu 44>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
<0x01c86000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
interrupt-controller;
#interrupt-cells = <3>;
};
rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
};
};

8
arch/arm64/boot/dts/amlogic/Makefile
Просмотреть файл

@ -1,9 +1,17 @@
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)

190
arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi Normal file
Просмотреть файл

@ -0,0 +1,190 @@
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/* Common DTSI for same Amlogic Q200/Q201 and P230/P231 boards using either
* the pin-compatible S912 (GXM) or S905D (GXL) SoCs.
*/
/ {
aliases {
serial0 = &uart_AO;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
};
/* This UART is brought out to the DB9 connector */
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
brcmf: bcrmf@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vddio_boot>;
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
&ethmac {
status = "okay";
};

360
arch/arm64/boot/dts/amlogic/meson-gx.dtsi Normal file
Просмотреть файл

@ -0,0 +1,360 @@
/*
* Copyright (c) 2016 Andreas Färber
*
* Copyright (c) 2016 BayLibre, SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <0x2>;
#size-cells = <0x0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&l2>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&l2>;
};
l2: l2-cache0 {
compatible = "cache";
};
};
arm-pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
};
xtal: xtal-clk {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "xtal";
#clock-cells = <0>;
};
firmware {
sm: secure-monitor {
compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
};
};
efuse: efuse {
compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
#address-cells = <1>;
#size-cells = <1>;
sn: sn@14 {
reg = <0x14 0x10>;
};
eth_mac: eth_mac@34 {
reg = <0x34 0x10>;
};
bid: bid@46 {
reg = <0x46 0x30>;
};
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
cbus: cbus@c1100000 {
compatible = "simple-bus";
reg = <0x0 0xc1100000 0x0 0x100000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
reset: reset-controller@4404 {
compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
reg = <0x0 0x04404 0x0 0x20>;
#reset-cells = <1>;
};
uart_A: serial@84c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x84c0 0x0 0x14>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
uart_B: serial@84dc {
compatible = "amlogic,meson-uart";
reg = <0x0 0x84dc 0x0 0x14>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
i2c_A: i2c@8500 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x08500 0x0 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
pwm_ab: pwm@8550 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x08550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_cd: pwm@8650 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x08650 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_ef: pwm@86c0 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x086c0 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
uart_C: serial@8700 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x8700 0x0 0x14>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
i2c_B: i2c@87c0 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087c0 0x0 0x20>;
interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_C: i2c@87e0 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087e0 0x0 0x20>;
interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
watchdog@98d0 {
compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
reg = <0x0 0x098d0 0x0 0x10>;
clocks = <&xtal>;
};
};
gic: interrupt-controller@c4301000 {
compatible = "arm,gic-400";
reg = <0x0 0xc4301000 0 0x1000>,
<0x0 0xc4302000 0 0x2000>,
<0x0 0xc4304000 0 0x2000>,
<0x0 0xc4306000 0 0x2000>;
interrupt-controller;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
#interrupt-cells = <3>;
#address-cells = <0>;
};
aobus: aobus@c8100000 {
compatible = "simple-bus";
reg = <0x0 0xc8100000 0x0 0x100000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
uart_AO: serial@4c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x004c0 0x0 0x14>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
ir: ir@580 {
compatible = "amlogic,meson-gxbb-ir";
reg = <0x0 0x00580 0x0 0x40>;
interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
};
periphs: periphs@c8834000 {
compatible = "simple-bus";
reg = <0x0 0xc8834000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
rng {
compatible = "amlogic,meson-rng";
reg = <0x0 0x0 0x0 0x4>;
};
};
hiubus: hiubus@c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
mailbox: mailbox@404 {
compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
reg = <0 0x404 0 0x4c>;
interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
<0 209 IRQ_TYPE_EDGE_RISING>,
<0 210 IRQ_TYPE_EDGE_RISING>;
#mbox-cells = <1>;
};
};
ethmac: ethernet@c9410000 {
compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
phy-mode = "rgmii";
status = "disabled";
};
apb: apb@d0000000 {
compatible = "simple-bus";
reg = <0x0 0xd0000000 0x0 0x200000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
sd_emmc_a: mmc@70000 {
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
reg = <0x0 0x70000 0x0 0x2000>;
interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
sd_emmc_b: mmc@72000 {
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
reg = <0x0 0x72000 0x0 0x2000>;
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
sd_emmc_c: mmc@74000 {
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
reg = <0x0 0x74000 0x0 0x2000>;
interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
};
};
};

231
arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts Normal file
Просмотреть файл

@ -0,0 +1,231 @@
/*
* Copyright (c) 2016 Andreas Färber
* Copyright (c) 2016 BayLibre, Inc.
* Author: Neil Armstrong <narmstrong@kernel.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxbb.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "nexbox,a95x", "amlogic,meson-gxbb";
model = "NEXBOX A95X";
aliases {
serial0 = &uart_AO;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
leds {
compatible = "gpio-leds";
blue {
label = "a95x:system-status";
gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
default-state = "off";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
button@0 {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
};
};
vddio_card: gpio-regulator {
compatible = "regulator-gpio";
regulator-name = "VDDIO_CARD";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
states = <1800000 0
3300000 1>;
};
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_rmii_pins>;
pinctrl-names = "default";
phy-mode = "rmii";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_card>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vddio_boot>;
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};

119
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
Просмотреть файл

@ -64,6 +64,18 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
usb_otg_pwr: regulator-usb-pwrs {
compatible = "regulator-fixed";
regulator-name = "USB_OTG_PWR";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
leds {
compatible = "gpio-leds";
blue {
@ -73,6 +85,56 @@
default-state = "off";
};
};
tflash_vdd: regulator-tflash_vdd {
/*
* signal name from schematics: TFLASH_VDD_EN
*/
compatible = "regulator-fixed";
regulator-name = "TFLASH_VDD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
tf_io: gpio-regulator-tf_io {
compatible = "regulator-gpio";
regulator-name = "TF_IO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
/*
* signal name from schematics: TF_3V3N_1V8_EN
*/
gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
gpios-states = <0>;
states = <3300000 0
1800000 1>;
};
vcc1v8: regulator-vcc1v8 {
compatible = "regulator-fixed";
regulator-name = "VCC1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vcc3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
};
&uart_AO {
@ -83,7 +145,7 @@
&ethmac {
status = "okay";
pinctrl-0 = <&eth_pins>;
pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default";
};
@ -98,3 +160,58 @@
pinctrl-0 = <&i2c_a_pins>;
pinctrl-names = "default";
};
&usb0_phy {
status = "okay";
phy-supply = <&usb_otg_pwr>;
};
&usb1_phy {
status = "okay";
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};
/* SD */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&tflash_vdd>;
vqmmc-supply = <&tf_io>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
cap-mmc-highspeed;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc3v3>;
vqmmc-supply = <&vcc1v8>;
};

129
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
Просмотреть файл

@ -70,6 +70,61 @@
gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vddio_card: gpio-regulator {
compatible = "regulator-gpio";
regulator-name = "VDDIO_CARD";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
states = <1800000 0
3300000 1>;
};
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
};
/* This UART is brought out to the DB9 connector */
@ -81,7 +136,7 @@
&ethmac {
status = "okay";
pinctrl-0 = <&eth_pins>;
pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default";
};
@ -107,3 +162,75 @@
&usb1 {
status = "okay";
};
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
brcmf: bcrmf@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_card>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vddio_boot>;
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};

106
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
Просмотреть файл

@ -65,6 +65,39 @@
enable-active-high;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_1v8: regulator-vcc_1v8 {
compatible = "regulator-fixed";
regulator-name = "VCC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>,
<&gpio GPIOX_20 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
};
&uart_AO {
@ -82,7 +115,7 @@
&ethmac {
status = "okay";
pinctrl-0 = <&eth_pins>;
pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default";
};
@ -102,3 +135,74 @@
&usb1 {
status = "okay";
};
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins &sdio_irq_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vcc_1v8>;
brcmf: bcrmf@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&vcc_3v3>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vmmcq-sumpply = <&vcc_1v8>;
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};

957
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
Просмотреть файл

@ -40,9 +40,7 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "meson-gx.dtsi"
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
#include <dt-bindings/clock/gxbb-clkc.h>
@ -51,106 +49,30 @@
/ {
compatible = "amlogic,meson-gxbb";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <0x2>;
#size-cells = <0x0>;
scpi {
compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
mboxes = <&mailbox 1 &mailbox 2>;
shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
clocks {
compatible = "arm,scpi-clocks";
scpi_dvfs: scpi_clocks@0 {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>;
clock-output-names = "vcpu";
};
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
scpi_sensors: sensors {
compatible = "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
};
};
arm-pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
firmware {
sm: secure-monitor {
compatible = "amlogic,meson-gxbb-sm";
};
};
efuse: efuse {
compatible = "amlogic,meson-gxbb-efuse";
#address-cells = <1>;
#size-cells = <1>;
sn: sn@14 {
reg = <0x14 0x10>;
};
eth_mac: eth_mac@34 {
reg = <0x34 0x10>;
};
bid: bid@46 {
reg = <0x46 0x30>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
};
xtal: xtal-clk {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "xtal";
#clock-cells = <0>;
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
usb0_phy: phy@c0000000 {
compatible = "amlogic,meson-gxbb-usb2-phy";
#phy-cells = <0>;
@ -165,467 +87,29 @@
compatible = "amlogic,meson-gxbb-usb2-phy";
#phy-cells = <0>;
reg = <0x0 0xc0000020 0x0 0x20>;
resets = <&reset RESET_USB_OTG>;
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
clock-names = "usb_general", "usb";
status = "disabled";
};
cbus: cbus@c1100000 {
compatible = "simple-bus";
reg = <0x0 0xc1100000 0x0 0x100000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
sram: sram@c8000000 {
compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
reg = <0x0 0xc8000000 0x0 0x14000>;
reset: reset-controller@4404 {
compatible = "amlogic,meson-gxbb-reset";
reg = <0x0 0x04404 0x0 0x20>;
#reset-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0xc8000000 0x14000>;
cpu_scp_lpri: scp-shmem@0 {
compatible = "amlogic,meson-gxbb-scp-shmem";
reg = <0x13000 0x400>;
};
uart_A: serial@84c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x84c0 0x0 0x14>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
cpu_scp_hpri: scp-shmem@200 {
compatible = "amlogic,meson-gxbb-scp-shmem";
reg = <0x13400 0x400>;
};
uart_B: serial@84dc {
compatible = "amlogic,meson-uart";
reg = <0x0 0x84dc 0x0 0x14>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
pwm_ab: pwm@8550 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x08550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_cd: pwm@8650 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x08650 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_ef: pwm@86c0 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x086c0 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
uart_C: serial@8700 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x8700 0x0 0x14>;
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
watchdog@98d0 {
compatible = "amlogic,meson-gxbb-wdt";
reg = <0x0 0x098d0 0x0 0x10>;
clocks = <&xtal>;
};
spifc: spi@8c80 {
compatible = "amlogic,meson-gxbb-spifc";
reg = <0x0 0x08c80 0x0 0x80>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clkc CLKID_SPI>;
status = "disabled";
};
i2c_A: i2c@8500 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x08500 0x0 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_B: i2c@87c0 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087c0 0x0 0x20>;
interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c_C: i2c@87e0 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087e0 0x0 0x20>;
interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
gic: interrupt-controller@c4301000 {
compatible = "arm,gic-400";
reg = <0x0 0xc4301000 0 0x1000>,
<0x0 0xc4302000 0 0x2000>,
<0x0 0xc4304000 0 0x2000>,
<0x0 0xc4306000 0 0x2000>;
interrupt-controller;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
#interrupt-cells = <3>;
#address-cells = <0>;
};
aobus: aobus@c8100000 {
compatible = "simple-bus";
reg = <0x0 0xc8100000 0x0 0x100000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
pinctrl_aobus: pinctrl@14 {
compatible = "amlogic,meson-gxbb-aobus-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio_ao: bank@14 {
reg = <0x0 0x00014 0x0 0x8>,
<0x0 0x0002c 0x0 0x4>,
<0x0 0x00024 0x0 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
};
};
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
};
};
i2c_ao_pins: i2c_ao {
mux {
groups = "i2c_sck_ao",
"i2c_sda_ao";
function = "i2c_ao";
};
};
pwm_ao_a_3_pins: pwm_ao_a_3 {
mux {
groups = "pwm_ao_a_3";
function = "pwm_ao_a_3";
};
};
pwm_ao_a_6_pins: pwm_ao_a_6 {
mux {
groups = "pwm_ao_a_6";
function = "pwm_ao_a_6";
};
};
pwm_ao_a_12_pins: pwm_ao_a_12 {
mux {
groups = "pwm_ao_a_12";
function = "pwm_ao_a_12";
};
};
pwm_ao_b_pins: pwm_ao_b {
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
};
};
};
clkc_AO: clock-controller@040 {
compatible = "amlogic,gxbb-aoclkc";
reg = <0x0 0x00040 0x0 0x4>;
#clock-cells = <1>;
#reset-cells = <1>;
};
uart_AO: serial@4c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x004c0 0x0 0x14>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
ir: ir@580 {
compatible = "amlogic,meson-gxbb-ir";
reg = <0x0 0x00580 0x0 0x40>;
interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
pwm_ab_AO: pwm@550 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x0550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
i2c_AO: i2c@500 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x500 0x0 0x20>;
interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_AO_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
periphs: periphs@c8834000 {
compatible = "simple-bus";
reg = <0x0 0xc8834000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
rng {
compatible = "amlogic,meson-rng";
reg = <0x0 0x0 0x0 0x4>;
};
pinctrl_periphs: pinctrl@4b0 {
compatible = "amlogic,meson-gxbb-periphs-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio: bank@4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
<0x0 0x00120 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
emmc_pins: emmc {
mux {
groups = "emmc_nand_d07",
"emmc_cmd",
"emmc_clk";
function = "emmc";
};
};
nor_pins: nor {
mux {
groups = "nor_d",
"nor_q",
"nor_c",
"nor_cs";
function = "nor";
};
};
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
"sdcard_d1",
"sdcard_d2",
"sdcard_d3",
"sdcard_cmd",
"sdcard_clk";
function = "sdcard";
};
};
sdio_pins: sdio {
mux {
groups = "sdio_d0",
"sdio_d1",
"sdio_d2",
"sdio_d3",
"sdio_cmd",
"sdio_clk";
function = "sdio";
};
};
sdio_irq_pins: sdio_irq {
mux {
groups = "sdio_irq";
function = "sdio";
};
};
uart_a_pins: uart_a {
mux {
groups = "uart_tx_a",
"uart_rx_a";
function = "uart_a";
};
};
uart_b_pins: uart_b {
mux {
groups = "uart_tx_b",
"uart_rx_b";
function = "uart_b";
};
};
uart_c_pins: uart_c {
mux {
groups = "uart_tx_c",
"uart_rx_c";
function = "uart_c";
};
};
i2c_a_pins: i2c_a {
mux {
groups = "i2c_sck_a",
"i2c_sda_a";
function = "i2c_a";
};
};
i2c_b_pins: i2c_b {
mux {
groups = "i2c_sck_b",
"i2c_sda_b";
function = "i2c_b";
};
};
i2c_c_pins: i2c_c {
mux {
groups = "i2c_sck_c",
"i2c_sda_c";
function = "i2c_c";
};
};
eth_pins: eth_c {
mux {
groups = "eth_mdio",
"eth_mdc",
"eth_clk_rx_clk",
"eth_rx_dv",
"eth_rxd0",
"eth_rxd1",
"eth_rxd2",
"eth_rxd3",
"eth_rgmii_tx_clk",
"eth_tx_en",
"eth_txd0",
"eth_txd1",
"eth_txd2",
"eth_txd3";
function = "eth";
};
};
pwm_a_x_pins: pwm_a_x {
mux {
groups = "pwm_a_x";
function = "pwm_a_x";
};
};
pwm_a_y_pins: pwm_a_y {
mux {
groups = "pwm_a_y";
function = "pwm_a_y";
};
};
pwm_b_pins: pwm_b {
mux {
groups = "pwm_b";
function = "pwm_b";
};
};
pwm_d_pins: pwm_d {
mux {
groups = "pwm_d";
function = "pwm_d";
};
};
pwm_e_pins: pwm_e {
mux {
groups = "pwm_e";
function = "pwm_e";
};
};
pwm_f_x_pins: pwm_f_x {
mux {
groups = "pwm_f_x";
function = "pwm_f_x";
};
};
pwm_f_y_pins: pwm_f_y {
mux {
groups = "pwm_f_y";
function = "pwm_f_y";
};
};
};
};
hiubus: hiubus@c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
clkc: clock-controller@0 {
compatible = "amlogic,gxbb-clkc";
#clock-cells = <1>;
reg = <0x0 0x0 0x0 0x3db>;
};
mailbox: mailbox@404 {
compatible = "amlogic,meson-gxbb-mhu";
reg = <0 0x404 0 0x4c>;
interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
<0 209 IRQ_TYPE_EDGE_RISING>,
<0 210 IRQ_TYPE_EDGE_RISING>;
#mbox-cells = <1>;
};
};
apb: apb@d0000000 {
compatible = "simple-bus";
reg = <0x0 0xd0000000 0x0 0x200000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
};
usb0: usb@c9000000 {
@ -651,19 +135,374 @@
dr_mode = "host";
status = "disabled";
};
};
};
ethmac: ethernet@c9410000 {
compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
<&clkc CLKID_MPLL2>;
clock-names = "stmmaceth", "clkin0", "clkin1";
phy-mode = "rgmii";
status = "disabled";
&cpu0 {
clocks = <&scpi_dvfs 0>;
};
&cpu1 {
clocks = <&scpi_dvfs 0>;
};
&cpu2 {
clocks = <&scpi_dvfs 0>;
};
&cpu3 {
clocks = <&scpi_dvfs 0>;
};
&cbus {
spifc: spi@8c80 {
compatible = "amlogic,meson-gxbb-spifc";
reg = <0x0 0x08c80 0x0 0x80>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clkc CLKID_SPI>;
status = "disabled";
};
};
&ethmac {
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
<&clkc CLKID_MPLL2>;
clock-names = "stmmaceth", "clkin0", "clkin1";
};
&aobus {
pinctrl_aobus: pinctrl@14 {
compatible = "amlogic,meson-gxbb-aobus-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio_ao: bank@14 {
reg = <0x0 0x00014 0x0 0x8>,
<0x0 0x0002c 0x0 0x4>,
<0x0 0x00024 0x0 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
};
};
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
};
};
i2c_ao_pins: i2c_ao {
mux {
groups = "i2c_sck_ao",
"i2c_sda_ao";
function = "i2c_ao";
};
};
pwm_ao_a_3_pins: pwm_ao_a_3 {
mux {
groups = "pwm_ao_a_3";
function = "pwm_ao_a_3";
};
};
pwm_ao_a_6_pins: pwm_ao_a_6 {
mux {
groups = "pwm_ao_a_6";
function = "pwm_ao_a_6";
};
};
pwm_ao_a_12_pins: pwm_ao_a_12 {
mux {
groups = "pwm_ao_a_12";
function = "pwm_ao_a_12";
};
};
pwm_ao_b_pins: pwm_ao_b {
mux {
groups = "pwm_ao_b";
function = "pwm_ao_b";
};
};
};
clkc_AO: clock-controller@040 {
compatible = "amlogic,gxbb-aoclkc";
reg = <0x0 0x00040 0x0 0x4>;
#clock-cells = <1>;
#reset-cells = <1>;
};
pwm_ab_AO: pwm@550 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x0550 0x0 0x10>;
#pwm-cells = <3>;
status = "disabled";
};
i2c_AO: i2c@500 {
compatible = "amlogic,meson-gxbb-i2c";
reg = <0x0 0x500 0x0 0x20>;
interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_AO_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
&periphs {
pinctrl_periphs: pinctrl@4b0 {
compatible = "amlogic,meson-gxbb-periphs-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio: bank@4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
<0x0 0x00120 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
emmc_pins: emmc {
mux {
groups = "emmc_nand_d07",
"emmc_cmd",
"emmc_clk",
"emmc_ds";
function = "emmc";
};
};
nor_pins: nor {
mux {
groups = "nor_d",
"nor_q",
"nor_c",
"nor_cs";
function = "nor";
};
};
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
"sdcard_d1",
"sdcard_d2",
"sdcard_d3",
"sdcard_cmd",
"sdcard_clk";
function = "sdcard";
};
};
sdio_pins: sdio {
mux {
groups = "sdio_d0",
"sdio_d1",
"sdio_d2",
"sdio_d3",
"sdio_cmd",
"sdio_clk";
function = "sdio";
};
};
sdio_irq_pins: sdio_irq {
mux {
groups = "sdio_irq";
function = "sdio";
};
};
uart_a_pins: uart_a {
mux {
groups = "uart_tx_a",
"uart_rx_a";
function = "uart_a";
};
};
uart_b_pins: uart_b {
mux {
groups = "uart_tx_b",
"uart_rx_b";
function = "uart_b";
};
};
uart_c_pins: uart_c {
mux {
groups = "uart_tx_c",
"uart_rx_c";
function = "uart_c";
};
};
i2c_a_pins: i2c_a {
mux {
groups = "i2c_sck_a",
"i2c_sda_a";
function = "i2c_a";
};
};
i2c_b_pins: i2c_b {
mux {
groups = "i2c_sck_b",
"i2c_sda_b";
function = "i2c_b";
};
};
i2c_c_pins: i2c_c {
mux {
groups = "i2c_sck_c",
"i2c_sda_c";
function = "i2c_c";
};
};
eth_rgmii_pins: eth-rgmii {
mux {
groups = "eth_mdio",
"eth_mdc",
"eth_clk_rx_clk",
"eth_rx_dv",
"eth_rxd0",
"eth_rxd1",
"eth_rxd2",
"eth_rxd3",
"eth_rgmii_tx_clk",
"eth_tx_en",
"eth_txd0",
"eth_txd1",
"eth_txd2",
"eth_txd3";
function = "eth";
};
};
eth_rmii_pins: eth-rmii {
mux {
groups = "eth_mdio",
"eth_mdc",
"eth_clk_rx_clk",
"eth_rx_dv",
"eth_rxd0",
"eth_rxd1",
"eth_tx_en",
"eth_txd0",
"eth_txd1";
function = "eth";
};
};
pwm_a_x_pins: pwm_a_x {
mux {
groups = "pwm_a_x";
function = "pwm_a_x";
};
};
pwm_a_y_pins: pwm_a_y {
mux {
groups = "pwm_a_y";
function = "pwm_a_y";
};
};
pwm_b_pins: pwm_b {
mux {
groups = "pwm_b";
function = "pwm_b";
};
};
pwm_d_pins: pwm_d {
mux {
groups = "pwm_d";
function = "pwm_d";
};
};
pwm_e_pins: pwm_e {
mux {
groups = "pwm_e";
function = "pwm_e";
};
};
pwm_f_x_pins: pwm_f_x {
mux {
groups = "pwm_f_x";
function = "pwm_f_x";
};
};
pwm_f_y_pins: pwm_f_y {
mux {
groups = "pwm_f_y";
function = "pwm_f_y";
};
};
};
};
&hiubus {
clkc: clock-controller@0 {
compatible = "amlogic,gxbb-clkc";
#clock-cells = <1>;
reg = <0x0 0x0 0x0 0x3db>;
};
};
&i2c_A {
clocks = <&clkc CLKID_I2C>;
};
&i2c_B {
clocks = <&clkc CLKID_I2C>;
};
&i2c_C {
clocks = <&clkc CLKID_I2C>;
};
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_b {
clocks = <&clkc CLKID_SD_EMMC_B>,
<&xtal>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_c {
clocks = <&clkc CLKID_SD_EMMC_C>,
<&xtal>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};

205
arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts Normal file
Просмотреть файл

@ -0,0 +1,205 @@
/*
* Copyright (c) 2016 Andreas Färber
* Copyright (c) 2016 BayLibre, Inc.
* Author: Neil Armstrong <narmstrong@kernel.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxl-s905x.dtsi"
/ {
compatible = "nexbox,a95x", "amlogic,s905x", "amlogic,meson-gxl";
model = "NEXBOX A95X (S905X)";
aliases {
serial0 = &uart_AO;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
vddio_card: gpio-regulator {
compatible = "regulator-gpio";
regulator-name = "VDDIO_CARD";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
/* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */
states = <1800000 0
3300000 1>;
};
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&ethmac {
status = "okay";
phy-mode = "rmii";
phy-handle = <&internal_phy>;
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_card>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vddio_boot>;
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};

77
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts Normal file
Просмотреть файл

@ -0,0 +1,77 @@
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxl-s905d.dtsi"
#include "meson-gx-p23x-q20x.dtsi"
/ {
compatible = "amlogic,p230", "amlogic,s905d", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905D) P230 Development Board";
};
/* P230 has exclusive choice between internal or external PHY */
&ethmac {
pinctrl-0 = <&eth_pins>;
pinctrl-names = "default";
/* Select external PHY by default */
phy-handle = <&external_phy>;
/* External PHY reset is shared with internal PHY Led signals */
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
/* External PHY is in RGMII */
phy-mode = "rgmii";
};
&external_mdio {
external_phy: ethernet-phy@0 {
compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
reg = <0>;
max-speed = <1000>;
};
};

58
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts Normal file
Просмотреть файл

@ -0,0 +1,58 @@
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxl-s905d.dtsi"
#include "meson-gx-p23x-q20x.dtsi"
/ {
compatible = "amlogic,p231", "amlogic,s905d", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905D) P231 Development Board";
};
/* P231 has only internal PHY port */
&ethmac {
phy-mode = "rmii";
phy-handle = <&internal_phy>;
};

48
arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi Normal file
Просмотреть файл

@ -0,0 +1,48 @@
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "meson-gxl.dtsi"
/ {
compatible = "amlogic,s905d", "amlogic,meson-gxl";
};

69
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts Normal file
Просмотреть файл

@ -0,0 +1,69 @@
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxl-s905x.dtsi"
/ {
compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl";
model = "Amlogic Meson GXL (S905X) P212 Development Board";
aliases {
serial0 = &uart_AO;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
};
/* This UART is brought out to the DB9 connector */
&uart_AO {
status = "okay";
};

54
arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi Normal file
Просмотреть файл

@ -0,0 +1,54 @@
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "meson-gxl.dtsi"
/ {
compatible = "amlogic,s905x", "amlogic,meson-gxl";
};
/* S905X Only has access to its internal PHY */
&ethmac {
phy-mode = "rmii";
phy-handle = <&internal_phy>;
};

301
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi Normal file
Просмотреть файл

@ -0,0 +1,301 @@
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "meson-gx.dtsi"
#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
/ {
compatible = "amlogic,meson-gxl";
};
&ethmac {
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>;
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
<&clkc CLKID_MPLL2>;
clock-names = "stmmaceth", "clkin0", "clkin1";
mdio0: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
};
};
&aobus {
pinctrl_aobus: pinctrl@14 {
compatible = "amlogic,meson-gxl-aobus-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio_ao: bank@14 {
reg = <0x0 0x00014 0x0 0x8>,
<0x0 0x0002c 0x0 0x4>,
<0x0 0x00024 0x0 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_tx_ao_a", "uart_rx_ao_a";
function = "uart_ao";
};
};
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
};
};
};
};
&periphs {
pinctrl_periphs: pinctrl@4b0 {
compatible = "amlogic,meson-gxl-periphs-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio: bank@4b0 {
reg = <0x0 0x004b0 0x0 0x28>,
<0x0 0x004e8 0x0 0x14>,
<0x0 0x00120 0x0 0x14>,
<0x0 0x00430 0x0 0x40>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
};
emmc_pins: emmc {
mux {
groups = "emmc_nand_d07",
"emmc_cmd",
"emmc_clk",
"emmc_ds";
function = "emmc";
};
};
sdcard_pins: sdcard {
mux {
groups = "sdcard_d0",
"sdcard_d1",
"sdcard_d2",
"sdcard_d3",
"sdcard_cmd",
"sdcard_clk";
function = "sdcard";
};
};
sdio_pins: sdio {
mux {
groups = "sdio_d0",
"sdio_d1",
"sdio_d2",
"sdio_d3",
"sdio_cmd",
"sdio_clk";
function = "sdio";
};
};
sdio_irq_pins: sdio_irq {
mux {
groups = "sdio_irq";
function = "sdio";
};
};
uart_a_pins: uart_a {
mux {
groups = "uart_tx_a",
"uart_rx_a";
function = "uart_a";
};
};
uart_b_pins: uart_b {
mux {
groups = "uart_tx_b",
"uart_rx_b";
function = "uart_b";
};
};
uart_c_pins: uart_c {
mux {
groups = "uart_tx_c",
"uart_rx_c";
function = "uart_c";
};
};
i2c_a_pins: i2c_a {
mux {
groups = "i2c_sck_a",
"i2c_sda_a";
function = "i2c_a";
};
};
i2c_b_pins: i2c_b {
mux {
groups = "i2c_sck_b",
"i2c_sda_b";
function = "i2c_b";
};
};
i2c_c_pins: i2c_c {
mux {
groups = "i2c_sck_c",
"i2c_sda_c";
function = "i2c_c";
};
};
eth_pins: eth_c {
mux {
groups = "eth_mdio",
"eth_mdc",
"eth_clk_rx_clk",
"eth_rx_dv",
"eth_rxd0",
"eth_rxd1",
"eth_rxd2",
"eth_rxd3",
"eth_rgmii_tx_clk",
"eth_tx_en",
"eth_txd0",
"eth_txd1",
"eth_txd2",
"eth_txd3";
function = "eth";
};
};
pwm_e_pins: pwm_e {
mux {
groups = "pwm_e";
function = "pwm_e";
};
};
};
eth-phy-mux {
compatible = "mdio-mux-mmioreg", "mdio-mux";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x55c 0x0 0x4>;
mux-mask = <0xffffffff>;
mdio-parent-bus = <&mdio0>;
internal_mdio: mdio@e40908ff {
reg = <0xe40908ff>;
#address-cells = <1>;
#size-cells = <0>;
internal_phy: ethernet-phy@8 {
compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22";
reg = <8>;
max-speed = <100>;
};
};
external_mdio: mdio@2009087f {
reg = <0x2009087f>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
&hiubus {
clkc: clock-controller@0 {
compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
#clock-cells = <1>;
reg = <0x0 0x0 0x0 0x3db>;
};
};
&i2c_A {
clocks = <&clkc CLKID_I2C>;
};
&i2c_B {
clocks = <&clkc CLKID_I2C>;
};
&i2c_C {
clocks = <&clkc CLKID_I2C>;
};
&sd_emmc_a {
clocks = <&clkc CLKID_SD_EMMC_A>,
<&xtal>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_b {
clocks = <&clkc CLKID_SD_EMMC_B>,
<&xtal>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&sd_emmc_c {
clocks = <&clkc CLKID_SD_EMMC_C>,
<&xtal>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};

169
arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts Normal file
Просмотреть файл

@ -0,0 +1,169 @@
/*
* Copyright (c) 2016 BayLibre, SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxm.dtsi"
/ {
compatible = "nexbox,a1", "amlogic,s912", "amlogic,meson-gxm";
model = "NEXBOX A1";
aliases {
serial0 = &uart_AO;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
vddio_boot: regulator-vddio-boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddao_3v3: regulator-vddao-3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_3v3: regulator-vcc-3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
};
/* This UART is brought out to the DB9 connector */
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-names = "default";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
cd-inverted;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>;
pinctrl-names = "default";
bus-width = <8>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vddio_boot>;
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_pins>;
pinctrl-names = "default";
/* Select external PHY by default */
phy-handle = <&external_phy>;
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
/* External PHY is in RGMII */
phy-mode = "rgmii";
};
&external_mdio {
external_phy: ethernet-phy@0 {
compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
reg = <0>;
max-speed = <1000>;
};
};

77
arch/arm64/boot/dts/amlogic/meson-gxm-s912-q200.dts Normal file
Просмотреть файл

@ -0,0 +1,77 @@
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxm.dtsi"
#include "meson-gx-p23x-q20x.dtsi"
/ {
compatible = "amlogic,q200", "amlogic,s912", "amlogic,meson-gxm";
model = "Amlogic Meson GXM (S912) Q200 Development Board";
};
/* Q200 has exclusive choice between internal or external PHY */
&ethmac {
pinctrl-0 = <&eth_pins>;
pinctrl-names = "default";
/* Select external PHY by default */
phy-handle = <&external_phy>;
/* External PHY reset is shared with internal PHY Led signals */
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
/* External PHY is in RGMII */
phy-mode = "rgmii";
};
&external_mdio {
external_phy: ethernet-phy@0 {
compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
reg = <0>;
max-speed = <1000>;
};
};

58
arch/arm64/boot/dts/amlogic/meson-gxm-s912-q201.dts Normal file
Просмотреть файл

@ -0,0 +1,58 @@
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "meson-gxm.dtsi"
#include "meson-gx-p23x-q20x.dtsi"
/ {
compatible = "amlogic,q201", "amlogic,s912", "amlogic,meson-gxm";
model = "Amlogic Meson GXM (S912) Q201 Development Board";
};
/* Q201 has only internal PHY port */
&ethmac {
phy-mode = "rmii";
phy-handle = <&internal_phy>;
};

114
arch/arm64/boot/dts/amlogic/meson-gxm.dtsi Normal file
Просмотреть файл

@ -0,0 +1,114 @@
/*
* Copyright (c) 2016 Endless Computers, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "meson-gxl.dtsi"
/ {
compatible = "amlogic,meson-gxm";
cpus {
cpu-map {
cluster0 {
core0 {
cpu = <&cpu0>;
};
core1 {
cpu = <&cpu1>;
};
core2 {
cpu = <&cpu2>;
};
core3 {
cpu = <&cpu3>;
};
};
cluster1 {
core0 {
cpu = <&cpu4>;
};
core1 {
cpu = <&cpu5>;
};
core2 {
cpu = <&cpu6>;
};
core3 {
cpu = <&cpu7>;
};
};
};
cpu4: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&l2>;
};
cpu5: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&l2>;
};
cpu6: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x102>;
enable-method = "psci";
next-level-cache = <&l2>;
};
cpu7: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x103>;
enable-method = "psci";
next-level-cache = <&l2>;
};
};
};

80
arch/arm64/boot/dts/arm/juno-base.dtsi
Просмотреть файл

@ -29,6 +29,28 @@
clock-names = "apb_pclk";
};
smmu_pcie: iommu@2b500000 {
compatible = "arm,mmu-401", "arm,smmu-v1";
reg = <0x0 0x2b500000 0x0 0x10000>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
dma-coherent;
status = "disabled";
};
smmu_etr: iommu@2b600000 {
compatible = "arm,mmu-401", "arm,smmu-v1";
reg = <0x0 0x2b600000 0x0 0x10000>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
dma-coherent;
status = "disabled";
};
gic: interrupt-controller@2c010000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
reg = <0x0 0x2c010000 0 0x1000>,
@ -146,6 +168,7 @@
etr@20070000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x20070000 0 0x1000>;
iommus = <&smmu_etr 0>;
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
@ -404,6 +427,8 @@
<0 0 0 4 &gic 0 0 0 139 4>;
msi-parent = <&v2m_0>;
status = "disabled";
iommu-map-mask = <0x0>; /* RC has no means to output PCI RID */
iommu-map = <0x0 &smmu_pcie 0x0 0x1>;
};
scpi {
@ -484,6 +509,48 @@
/include/ "juno-clocks.dtsi"
smmu_dma: iommu@7fb00000 {
compatible = "arm,mmu-401", "arm,smmu-v1";
reg = <0x0 0x7fb00000 0x0 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
dma-coherent;
status = "disabled";
};
smmu_hdlcd1: iommu@7fb10000 {
compatible = "arm,mmu-401", "arm,smmu-v1";
reg = <0x0 0x7fb10000 0x0 0x10000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
status = "disabled";
};
smmu_hdlcd0: iommu@7fb20000 {
compatible = "arm,mmu-401", "arm,smmu-v1";
reg = <0x0 0x7fb20000 0x0 0x10000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
status = "disabled";
};
smmu_usb: iommu@7fb30000 {
compatible = "arm,mmu-401", "arm,smmu-v1";
reg = <0x0 0x7fb30000 0x0 0x10000>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
#global-interrupts = <1>;
dma-coherent;
status = "disabled";
};
dma@7ff00000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0x7ff00000 0 0x1000>;
@ -499,6 +566,15 @@
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&smmu_dma 0>,
<&smmu_dma 1>,
<&smmu_dma 2>,
<&smmu_dma 3>,
<&smmu_dma 4>,
<&smmu_dma 5>,
<&smmu_dma 6>,
<&smmu_dma 7>,
<&smmu_dma 8>;
clocks = <&soc_faxiclk>;
clock-names = "apb_pclk";
};
@ -507,6 +583,7 @@
compatible = "arm,hdlcd";
reg = <0 0x7ff50000 0 0x1000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&smmu_hdlcd1 0>;
clocks = <&scpi_clk 3>;
clock-names = "pxlclk";
@ -521,6 +598,7 @@
compatible = "arm,hdlcd";
reg = <0 0x7ff60000 0 0x1000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&smmu_hdlcd0 0>;
clocks = <&scpi_clk 3>;
clock-names = "pxlclk";
@ -574,6 +652,7 @@
compatible = "generic-ohci";
reg = <0x0 0x7ffb0000 0x0 0x10000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&smmu_usb 0>;
clocks = <&soc_usb48mhz>;
};
@ -581,6 +660,7 @@
compatible = "generic-ehci";
reg = <0x0 0x7ffc0000 0x0 0x10000>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&smmu_usb 0>;
clocks = <&soc_usb48mhz>;
};

6
arch/arm64/boot/dts/arm/juno-r1.dts
Просмотреть файл

@ -90,6 +90,7 @@
next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
};
A57_1: cpu@1 {
@ -100,6 +101,7 @@
next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
};
A53_0: cpu@100 {
@ -110,6 +112,7 @@
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
};
A53_1: cpu@101 {
@ -120,6 +123,7 @@
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
};
A53_2: cpu@102 {
@ -130,6 +134,7 @@
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
};
A53_3: cpu@103 {
@ -140,6 +145,7 @@
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
};
A57_L2: l2-cache0 {

6
arch/arm64/boot/dts/arm/juno-r2.dts
Просмотреть файл

@ -90,6 +90,7 @@
next-level-cache = <&A72_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
};
A72_1: cpu@1 {
@ -100,6 +101,7 @@
next-level-cache = <&A72_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
};
A53_0: cpu@100 {
@ -110,6 +112,7 @@
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <485>;
};
A53_1: cpu@101 {
@ -120,6 +123,7 @@
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <485>;
};
A53_2: cpu@102 {
@ -130,6 +134,7 @@
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <485>;
};
A53_3: cpu@103 {
@ -140,6 +145,7 @@
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <485>;
};
A72_L2: l2-cache0 {

6
arch/arm64/boot/dts/arm/juno.dts
Просмотреть файл

@ -90,6 +90,7 @@
next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
};
A57_1: cpu@1 {
@ -100,6 +101,7 @@
next-level-cache = <&A57_L2>;
clocks = <&scpi_dvfs 0>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
};
A53_0: cpu@100 {
@ -110,6 +112,7 @@
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
};
A53_1: cpu@101 {
@ -120,6 +123,7 @@
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
};
A53_2: cpu@102 {
@ -130,6 +134,7 @@
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
};
A53_3: cpu@103 {
@ -140,6 +145,7 @@
next-level-cache = <&A53_L2>;
clocks = <&scpi_dvfs 1>;
cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <578>;
};
A57_L2: l2-cache0 {

8
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
Просмотреть файл

@ -2,6 +2,7 @@
#include "bcm2837.dtsi"
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-smsc9514.dtsi"
#include "bcm283x-rpi-usb-host.dtsi"
/ {
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
@ -15,13 +16,6 @@
act {
gpios = <&gpio 47 0>;
};
pwr {
label = "PWR";
gpios = <&gpio 35 0>;
default-state = "keep";
linux,default-trigger = "default-on";
};
};
};

8
arch/arm64/boot/dts/broadcom/bcm2837.dtsi
Просмотреть файл

@ -1,7 +1,7 @@
#include "bcm283x.dtsi"
/ {
compatible = "brcm,bcm2836";
compatible = "brcm,bcm2837";
soc {
ranges = <0x7e000000 0x3f000000 0x1000000>,
@ -74,3 +74,9 @@
interrupt-parent = <&local_intc>;
interrupts = <8>;
};
/* enable thermal sensor with the correct compatible property set */
&thermal {
compatible = "brcm,bcm2837-thermal";
status = "okay";
};

1
arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi Symbolic link
Просмотреть файл

@ -0,0 +1 @@
../../../../arm/boot/dts/bcm283x-rpi-usb-host.dtsi

38
arch/arm64/boot/dts/broadcom/ns2-svk.dts
Просмотреть файл

@ -161,6 +161,10 @@
status = "ok";
};
&sdio1 {
status = "ok";
};
&nand {
nandcs@0 {
compatible = "brcm,nandcs";
@ -192,3 +196,37 @@
groups = "nand_grp";
};
};
&qspi {
bspi-sel = <0>;
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80";
reg = <0x0>;
spi-max-frequency = <12500000>;
m25p,fast-read;
spi-cpol;
spi-cpha;
partition@0 {
label = "boot";
reg = <0x00000000 0x000a0000>;
};
partition@a0000 {
label = "env";
reg = <0x000a0000 0x00060000>;
};
partition@100000 {
label = "system";
reg = <0x00100000 0x00600000>;
};
partition@700000 {
label = "rootfs";
reg = <0x00700000 0x01900000>;
};
};
};

62
arch/arm64/boot/dts/broadcom/ns2.dtsi
Просмотреть файл

@ -133,6 +133,9 @@
status = "disabled";
phys = <&pci_phy0>;
phy-names = "pcie-phy";
msi-parent = <&msi0>;
msi0: msi@20020000 {
compatible = "brcm,iproc-msi";
@ -171,6 +174,9 @@
status = "disabled";
phys = <&pci_phy1>;
phy-names = "pcie-phy";
msi-parent = <&msi4>;
msi4: msi@50020000 {
compatible = "brcm,iproc-msi";
@ -203,6 +209,42 @@
status = "disabled";
};
pdc0: iproc-pdc0@612c0000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x612c0000 0x445>; /* PDC FS0 regs */
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
pdc1: iproc-pdc1@612e0000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x612e0000 0x445>; /* PDC FS1 regs */
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
pdc2: iproc-pdc2@61300000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x61300000 0x445>; /* PDC FS2 regs */
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
pdc3: iproc-pdc3@61320000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x61320000 0x445>; /* PDC FS3 regs */
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
dma0: dma@61360000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x61360000 0x1000>;
@ -260,7 +302,7 @@
<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
mmu-masters;
#iommu-cells = <1>;
};
pinctrl: pinctrl@6501d130 {
@ -577,5 +619,23 @@
brcm,nand-has-wp;
};
qspi: spi@66470200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
reg = <0x66470200 0x184>,
<0x66470000 0x124>,
<0x67017408 0x004>,
<0x664703a0 0x01c>;
reg-names = "mspi", "bspi", "intr_regs",
"intr_status_reg";
interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "spi_l1_intr";
clocks = <&iprocmed>;
clock-names = "iprocmed";
num-cs = <2>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};

5
arch/arm64/boot/dts/exynos/Makefile
Просмотреть файл

@ -1,4 +1,7 @@
dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb
dtb-$(CONFIG_ARCH_EXYNOS) += \
exynos5433-tm2.dtb \
exynos5433-tm2e.dtb \
exynos7-espresso.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)

804
arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi Normal file
Просмотреть файл

@ -0,0 +1,804 @@
/*
* Samsung's Exynos5433 SoC pin-mux and pin-config device tree source
*
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
* Chanwoo Choi <cw00.choi@samsung.com>
*
* Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device
* tree nodes are listed in this file.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define PIN_PULL_NONE 0
#define PIN_PULL_DOWN 1
#define PIN_PULL_UP 3
#define PIN_DRV_LV1 0
#define PIN_DRV_LV2 2
#define PIN_DRV_LV3 1
#define PIN_DRV_LV4 3
#define PIN_IN 0
#define PIN_OUT 1
#define PIN_FUNC1 2
#define PIN(_func, _pin, _pull, _drv) \
_pin { \
samsung,pins = #_pin; \
samsung,pin-function = <PIN_ ##_func>; \
samsung,pin-pud = <PIN_PULL_ ##_pull>; \
samsung,pin-drv = <PIN_DRV_ ##_drv>; \
}
&pinctrl_alive {
gpa0: gpa0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
gpa1: gpa1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
gpa2: gpa2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpa3: gpa3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf1: gpf1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf2: gpf2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf3: gpf3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf4: gpf4 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpf5: gpf5 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
&pinctrl_aud {
gpz0: gpz0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpz1: gpz1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
i2s0_bus: i2s0-bus {
samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
"gpz0-4", "gpz0-5", "gpz0-6";
samsung,pin-function = <2>;
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
pcm0_bus: pcm0-bus {
samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3";
samsung,pin-function = <3>;
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
uart_aud_bus: uart-aud-bus {
samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
&pinctrl_cpif {
gpv6: gpv6 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
&pinctrl_ese {
gpj2: gpj2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
&pinctrl_finger {
gpd5: gpd5 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
spi2_bus: spi2-bus {
samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
hs_i2c6_bus: hs-i2c6-bus {
samsung,pins = "gpd5-3", "gpd5-2";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
};
&pinctrl_fsys {
gph1: gph1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpr4: gpr4 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpr0: gpr0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpr1: gpr1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpr2: gpr2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpr3: gpr3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
sd0_clk: sd0-clk {
samsung,pins = "gpr0-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpr0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd0_rdqs: sd0-rdqs {
samsung,pins = "gpr0-2";
samsung,pin-function = <2>;
samsung,pin-pud = <1>;
samsung,pin-drv = <3>;
};
sd0_qrdy: sd0-qrdy {
samsung,pins = "gpr0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <1>;
samsung,pin-drv = <3>;
};
sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpr1-0";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpr2-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpr2-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpr3-0";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd1_bus8: sd1-bus-width8 {
samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
pcie_bus: pcie_bus {
samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpr4-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpr4-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
sd2_cd: sd2-cd {
samsung,pins = "gpr4-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpr4-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <3>;
};
sd2_clk_output: sd2-clk-output {
samsung,pins = "gpr4-0";
samsung,pin-function = <1>;
samsung,pin-pud = <0>;
samsung,pin-drv = <2>;
};
sd2_cmd_output: sd2-cmd-output {
samsung,pins = "gpr4-1";
samsung,pin-function = <1>;
samsung,pin-pud = <0>;
samsung,pin-drv = <2>;
};
};
&pinctrl_imem {
gpf0: gpf0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
&pinctrl_nfc {
gpj0: gpj0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
hs_i2c4_bus: hs-i2c4-bus {
samsung,pins = "gpj0-1", "gpj0-0";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
};
&pinctrl_peric {
gpv7: gpv7 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpb0: gpb0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc0: gpc0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc1: gpc1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc2: gpc2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpc3: gpc3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpg0: gpg0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpd0: gpd0 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpd1: gpd1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpd2: gpd2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpd4: gpd4 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpd8: gpd8 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpd6: gpd6 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpd7: gpd7 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpg1: gpg1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpg2: gpg2 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpg3: gpg3 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
hs_i2c8_bus: hs-i2c8-bus {
samsung,pins = "gpb0-1", "gpb0-0";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
hs_i2c9_bus: hs-i2c9-bus {
samsung,pins = "gpb0-3", "gpb0-2";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
i2s1_bus: i2s1-bus {
samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
"gpd4-3", "gpd4-4";
samsung,pin-function = <2>;
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
pcm1_bus: pcm1-bus {
samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
"gpd4-3", "gpd4-4";
samsung,pin-function = <3>;
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
spdif_bus: spdif-bus {
samsung,pins = "gpd4-3", "gpd4-4";
samsung,pin-function = <4>;
samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
fimc_is_spi_pin0: fimc-is-spi-pin0 {
samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
fimc_is_spi_pin1: fimc-is-spi-pin1 {
samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
uart0_bus: uart0-bus {
samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
};
hs_i2c2_bus: hs-i2c2-bus {
samsung,pins = "gpd0-3", "gpd0-2";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
uart2_bus: uart2-bus {
samsung,pins = "gpd1-5", "gpd1-4";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
};
uart1_bus: uart1-bus {
samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
};
hs_i2c3_bus: hs-i2c3-bus {
samsung,pins = "gpd1-3", "gpd1-2";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
hs_i2c0_bus: hs-i2c0-bus {
samsung,pins = "gpd2-1", "gpd2-0";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
hs_i2c1_bus: hs-i2c1-bus {
samsung,pins = "gpd2-3", "gpd2-2";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
pwm0_out: pwm0-out {
samsung,pins = "gpd2-4";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pwm1_out: pwm1-out {
samsung,pins = "gpd2-5";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pwm2_out: pwm2-out {
samsung,pins = "gpd2-6";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
pwm3_out: pwm3-out {
samsung,pins = "gpd2-7";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
hs_i2c7_bus: hs-i2c7-bus {
samsung,pins = "gpd2-7", "gpd2-6";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
hs_i2c10_bus: hs-i2c10-bus {
samsung,pins = "gpg3-1", "gpg3-0";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
hs_i2c11_bus: hs-i2c11-bus {
samsung,pins = "gpg3-3", "gpg3-2";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
spi3_bus: spi3-bus {
samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
spi4_bus: spi4-bus {
samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
fimc_is_uart: fimc-is-uart {
samsung,pins = "gpc1-1", "gpc0-7";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
fimc_is_ch0_i2c: fimc-is-ch0_i2c {
samsung,pins = "gpc2-1", "gpc2-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
fimc_is_ch0_mclk: fimc-is-ch0_mclk {
samsung,pins = "gpd7-0";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
fimc_is_ch1_i2c: fimc-is-ch1-i2c {
samsung,pins = "gpc2-3", "gpc2-2";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
fimc_is_ch1_mclk: fimc-is-ch1-mclk {
samsung,pins = "gpd7-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
fimc_is_ch2_i2c: fimc-is-ch2-i2c {
samsung,pins = "gpc2-5", "gpc2-4";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
fimc_is_ch2_mclk: fimc-is-ch2-mclk {
samsung,pins = "gpd7-2";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
&pinctrl_touch {
gpj1: gpj1 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
hs_i2c5_bus: hs-i2c5-bus {
samsung,pins = "gpj1-1", "gpj1-0";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
};

1049
arch/arm64/boot/dts/exynos/exynos5433-tm2.dts Normal file
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

41
arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts Normal file
Просмотреть файл

@ -0,0 +1,41 @@
/*
* SAMSUNG Exynos5433 TM2E board device tree source
*
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
*
* Device tree source file for Samsung's TM2E(TM2 EDGE) board which is based on
* Samsung Exynos5433 SoC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "exynos5433-tm2.dts"
/ {
model = "Samsung TM2E board";
compatible = "samsung,tm2e", "samsung,exynos5433";
};
&ldo23_reg {
regulator-name = "CAM_SEN_CORE_1.025V_AP";
regulator-max-microvolt = <1050000>;
};
&ldo25_reg {
regulator-name = "UNUSED_LDO25";
regulator-always-off;
};
&ldo31_reg {
regulator-name = "TSP_VDD_1.8V_AP";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
&ldo38_reg {
regulator-name = "VCC_3.3V_MOTOR_AP";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};

23
arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi Normal file
Просмотреть файл

@ -0,0 +1,23 @@
/*
* Device tree sources for Exynos5433 TMU sensor configuration
*
* Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <dt-bindings/thermal/thermal_exynos.h>
#thermal-sensor-cells = <0>;
samsung,tmu_gain = <8>;
samsung,tmu_reference_voltage = <23>;
samsung,tmu_noise_cancel_mode = <4>;
samsung,tmu_efuse_value = <75>;
samsung,tmu_min_efuse_value = <40>;
samsung,tmu_max_efuse_value = <150>;
samsung,tmu_first_point_trim = <25>;
samsung,tmu_second_point_trim = <85>;
samsung,tmu_default_temp_offset = <50>;
samsung,tmu_mux_addr = <6>;

22
arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi Normal file
Просмотреть файл

@ -0,0 +1,22 @@
/*
* Device tree sources for Exynos5433 TMU sensor configuration
*
* Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <dt-bindings/thermal/thermal_exynos.h>
#thermal-sensor-cells = <0>;
samsung,tmu_gain = <8>;
samsung,tmu_reference_voltage = <16>;
samsung,tmu_noise_cancel_mode = <4>;
samsung,tmu_efuse_value = <75>;
samsung,tmu_min_efuse_value = <40>;
samsung,tmu_max_efuse_value = <150>;
samsung,tmu_first_point_trim = <25>;
samsung,tmu_second_point_trim = <85>;
samsung,tmu_default_temp_offset = <50>;

296
arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi Normal file
Просмотреть файл

@ -0,0 +1,296 @@
/*
* Device tree sources for Exynos5433 thermal zone
*
* Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <dt-bindings/thermal/thermal.h>
/ {
thermal-zones {
atlas0_thermal: atlas0-thermal {
thermal-sensors = <&tmu_atlas0>;
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
atlas0_alert_0: atlas0-alert-0 {
temperature = <65000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
atlas0_alert_1: atlas0-alert-1 {
temperature = <70000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
atlas0_alert_2: atlas0-alert-2 {
temperature = <75000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
atlas0_alert_3: atlas0-alert-3 {
temperature = <80000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
atlas0_alert_4: atlas0-alert-4 {
temperature = <85000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
atlas0_alert_5: atlas0-alert-5 {
temperature = <90000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
atlas0_alert_6: atlas0-alert-6 {
temperature = <95000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
};
cooling-maps {
map0 {
/* Set maximum frequency as 1800MHz */
trip = <&atlas0_alert_0>;
cooling-device = <&cpu4 1 2>;
};
map1 {
/* Set maximum frequency as 1700MHz */
trip = <&atlas0_alert_1>;
cooling-device = <&cpu4 2 3>;
};
map2 {
/* Set maximum frequency as 1600MHz */
trip = <&atlas0_alert_2>;
cooling-device = <&cpu4 3 4>;
};
map3 {
/* Set maximum frequency as 1500MHz */
trip = <&atlas0_alert_3>;
cooling-device = <&cpu4 4 5>;
};
map4 {
/* Set maximum frequency as 1400MHz */
trip = <&atlas0_alert_4>;
cooling-device = <&cpu4 5 7>;
};
map5 {
/* Set maximum frequencyas 1200MHz */
trip = <&atlas0_alert_5>;
cooling-device = <&cpu4 7 9>;
};
map6 {
/* Set maximum frequency as 1000MHz */
trip = <&atlas0_alert_6>;
cooling-device = <&cpu4 9 14>;
};
};
};
atlas1_thermal: atlas1-thermal {
thermal-sensors = <&tmu_atlas1>;
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
atlas1_alert_0: atlas1-alert-0 {
temperature = <65000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
atlas1_alert_1: atlas1-alert-1 {
temperature = <70000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
atlas1_alert_2: atlas1-alert-2 {
temperature = <75000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
atlas1_alert_3: atlas1-alert-3 {
temperature = <80000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
atlas1_alert_4: atlas1-alert-4 {
temperature = <85000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
atlas1_alert_5: atlas1-alert-5 {
temperature = <90000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
atlas1_alert_6: atlas1-alert-6 {
temperature = <95000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
};
};
g3d_thermal: g3d-thermal {
thermal-sensors = <&tmu_g3d>;
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
g3d_alert_0: g3d-alert-0 {
temperature = <70000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
g3d_alert_1: g3d-alert-1 {
temperature = <75000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
g3d_alert_2: g3d-alert-2 {
temperature = <80000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
g3d_alert_3: g3d-alert-3 {
temperature = <85000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
g3d_alert_4: g3d-alert-4 {
temperature = <90000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
g3d_alert_5: g3d-alert-5 {
temperature = <95000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
g3d_alert_6: g3d-alert-6 {
temperature = <100000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
};
};
apollo_thermal: apollo-thermal {
thermal-sensors = <&tmu_apollo>;
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
apollo_alert_0: apollo-alert-0 {
temperature = <65000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
apollo_alert_1: apollo-alert-1 {
temperature = <70000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
apollo_alert_2: apollo-alert-2 {
temperature = <75000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
apollo_alert_3: apollo-alert-3 {
temperature = <80000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
apollo_alert_4: apollo-alert-4 {
temperature = <85000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
apollo_alert_5: apollo-alert-5 {
temperature = <90000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
apollo_alert_6: apollo-alert-6 {
temperature = <95000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
};
cooling-maps {
map0 {
/* Set maximum frequency as 1200MHz */
trip = <&apollo_alert_2>;
cooling-device = <&cpu0 1 2>;
};
map1 {
/* Set maximum frequency as 1100MHz */
trip = <&apollo_alert_3>;
cooling-device = <&cpu0 2 3>;
};
map2 {
/* Set maximum frequency as 1000MHz */
trip = <&apollo_alert_4>;
cooling-device = <&cpu0 3 4>;
};
map3 {
/* Set maximum frequency as 900MHz */
trip = <&apollo_alert_5>;
cooling-device = <&cpu0 4 5>;
};
map4 {
/* Set maximum frequency as 800MHz */
trip = <&apollo_alert_6>;
cooling-device = <&cpu0 5 9>;
};
};
};
isp_thermal: isp-thermal {
thermal-sensors = <&tmu_isp>;
polling-delay-passive = <0>;
polling-delay = <0>;
trips {
isp_alert_0: isp-alert-0 {
temperature = <80000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
isp_alert_1: isp-alert-1 {
temperature = <85000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
isp_alert_2: isp-alert-2 {
temperature = <90000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
isp_alert_3: isp-alert-3 {
temperature = <95000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
isp_alert_4: isp-alert-4 {
temperature = <100000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
isp_alert_5: isp-alert-5 {
temperature = <105000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
isp_alert_6: isp-alert-6 {
temperature = <110000>; /* millicelsius */
hysteresis = <1000>; /* millicelsius */
type = "active";
};
};
};
};
};

1462
arch/arm64/boot/dts/exynos/exynos5433.dtsi Normal file
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

20
arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
Просмотреть файл

@ -20,8 +20,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
#interrupt-cells = <2>;
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
gpa1: gpa1 {
@ -31,8 +37,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
#interrupt-cells = <2>;
interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
gpa2: gpa2 {

87
arch/arm64/boot/dts/exynos/exynos7.dtsi
Просмотреть файл

@ -35,28 +35,28 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
cpu_atlas0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x0>;
enable-method = "psci";
};
cpu@1 {
cpu_atlas1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x1>;
enable-method = "psci";
};
cpu@2 {
cpu_atlas2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x2>;
enable-method = "psci";
};
cpu@3 {
cpu_atlas3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a57", "arm,armv8";
reg = <0x3>;
@ -106,7 +106,7 @@
pdma0: pdma@10E10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10E10000 0x1000>;
interrupts = <0 225 0>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_fsys0 ACLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@ -117,7 +117,7 @@
pdma1: pdma@10EB0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10EB0000 0x1000>;
interrupts = <0 226 0>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_fsys0 ACLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@ -220,7 +220,7 @@
serial_0: serial@13630000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13630000 0x100>;
interrupts = <0 440 0>;
interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric0 PCLK_UART0>,
<&clock_peric0 SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
@ -230,7 +230,7 @@
serial_1: serial@14c20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x14c20000 0x100>;
interrupts = <0 456 0>;
interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric1 PCLK_UART1>,
<&clock_peric1 SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
@ -240,7 +240,7 @@
serial_2: serial@14c30000 {
compatible = "samsung,exynos4210-uart";
reg = <0x14c30000 0x100>;
interrupts = <0 457 0>;
interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric1 PCLK_UART2>,
<&clock_peric1 SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
@ -250,7 +250,7 @@
serial_3: serial@14c40000 {
compatible = "samsung,exynos4210-uart";
reg = <0x14c40000 0x100>;
interrupts = <0 458 0>;
interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric1 PCLK_UART3>,
<&clock_peric1 SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
@ -264,62 +264,62 @@
wakeup-interrupt-controller {
compatible = "samsung,exynos7-wakeup-eint";
interrupt-parent = <&gic>;
interrupts = <0 16 0>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_bus0: pinctrl@13470000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x13470000 0x1000>;
interrupts = <0 383 0>;
interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_nfc: pinctrl@14cd0000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14cd0000 0x1000>;
interrupts = <0 473 0>;
interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_touch: pinctrl@14ce0000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14ce0000 0x1000>;
interrupts = <0 474 0>;
interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_ff: pinctrl@14c90000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14c90000 0x1000>;
interrupts = <0 475 0>;
interrupts = <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_ese: pinctrl@14ca0000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14ca0000 0x1000>;
interrupts = <0 476 0>;
interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_fsys0: pinctrl@10e60000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x10e60000 0x1000>;
interrupts = <0 221 0>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_fsys1: pinctrl@15690000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x15690000 0x1000>;
interrupts = <0 203 0>;
interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_bus1: pinctrl@14870000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14870000 0x1000>;
interrupts = <0 384 0>;
interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
};
hsi2c_0: hsi2c@13640000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13640000 0x1000>;
interrupts = <0 441 0>;
interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@ -332,7 +332,7 @@
hsi2c_1: hsi2c@13650000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13650000 0x1000>;
interrupts = <0 442 0>;
interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@ -345,7 +345,7 @@
hsi2c_2: hsi2c@14e60000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x14e60000 0x1000>;
interrupts = <0 459 0>;
interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@ -358,7 +358,7 @@
hsi2c_3: hsi2c@14e70000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x14e70000 0x1000>;
interrupts = <0 460 0>;
interrupts = <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@ -371,7 +371,7 @@
hsi2c_4: hsi2c@13660000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13660000 0x1000>;
interrupts = <0 443 0>;
interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@ -384,7 +384,7 @@
hsi2c_5: hsi2c@13670000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13670000 0x1000>;
interrupts = <0 444 0>;
interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@ -397,7 +397,7 @@
hsi2c_6: hsi2c@14e00000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x14e00000 0x1000>;
interrupts = <0 461 0>;
interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@ -410,7 +410,7 @@
hsi2c_7: hsi2c@13e10000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13e10000 0x1000>;
interrupts = <0 462 0>;
interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@ -423,7 +423,7 @@
hsi2c_8: hsi2c@14e20000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x14e20000 0x1000>;
interrupts = <0 463 0>;
interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@ -436,7 +436,7 @@
hsi2c_9: hsi2c@13680000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13680000 0x1000>;
interrupts = <0 445 0>;
interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@ -449,7 +449,7 @@
hsi2c_10: hsi2c@13690000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13690000 0x1000>;
interrupts = <0 446 0>;
interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@ -462,7 +462,7 @@
hsi2c_11: hsi2c@136a0000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x136a0000 0x1000>;
interrupts = <0 447 0>;
interrupts = <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@ -472,6 +472,16 @@
status = "disabled";
};
arm-pmu {
compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3";
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu_atlas0>, <&cpu_atlas1>,
<&cpu_atlas2>, <&cpu_atlas3>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
@ -499,7 +509,8 @@
rtc: rtc@10590000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x10590000 0x100>;
interrupts = <0 355 0>, <0 356 0>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_ccore PCLK_RTC>;
clock-names = "rtc";
status = "disabled";
@ -508,7 +519,7 @@
watchdog: watchdog@101d0000 {
compatible = "samsung,exynos7-wdt";
reg = <0x101d0000 0x100>;
interrupts = <0 110 0>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peris PCLK_WDT>;
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_system_controller>;
@ -517,7 +528,7 @@
mmc_0: mmc@15740000 {
compatible = "samsung,exynos7-dw-mshc-smu";
interrupts = <0 201 0>;
interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x15740000 0x2000>;
@ -530,7 +541,7 @@
mmc_1: mmc@15750000 {
compatible = "samsung,exynos7-dw-mshc";
interrupts = <0 202 0>;
interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x15750000 0x2000>;
@ -543,7 +554,7 @@
mmc_2: mmc@15560000 {
compatible = "samsung,exynos7-dw-mshc-smu";
interrupts = <0 216 0>;
interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x15560000 0x2000>;
@ -557,7 +568,7 @@
adc: adc@13620000 {
compatible = "samsung,exynos7-adc";
reg = <0x13620000 0x100>;
interrupts = <0 448 0>;
interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric0 PCLK_ADCIF>;
clock-names = "adc";
#io-channel-cells = <1>;
@ -577,7 +588,7 @@
tmuctrl_0: tmu@10060000 {
compatible = "samsung,exynos7-tmu";
reg = <0x10060000 0x200>;
interrupts = <0 108 0>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peris PCLK_TMU>,
<&clock_peris SCLK_TMU>;
clock-names = "tmu_apbif", "tmu_sclk";

2
arch/arm64/boot/dts/freescale/Makefile
Просмотреть файл

@ -1,5 +1,7 @@
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb

2
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
Просмотреть файл

@ -45,7 +45,7 @@
*/
/dts-v1/;
/include/ "fsl-ls1043a.dtsi"
#include "fsl-ls1043a.dtsi"
/ {
model = "LS1043A QDS Board";

2
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
Просмотреть файл

@ -45,7 +45,7 @@
*/
/dts-v1/;
/include/ "fsl-ls1043a.dtsi"
#include "fsl-ls1043a.dtsi"
/ {
model = "LS1043A RDB Board";

78
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
Просмотреть файл

@ -44,6 +44,8 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "fsl,ls1043a";
interrupt-parent = <&gic>;
@ -66,6 +68,7 @@
reg = <0x0>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
#cooling-cells = <2>;
};
cpu1: cpu@1 {
@ -255,6 +258,81 @@
big-endian;
};
tmu: tmu@1f00000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f00000 0x0 0x10000>;
interrupts = <0 33 0x4>;
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
fsl,tmu-calibration = <0x00000000 0x00000026
0x00000001 0x0000002d
0x00000002 0x00000032
0x00000003 0x00000039
0x00000004 0x0000003f
0x00000005 0x00000046
0x00000006 0x0000004d
0x00000007 0x00000054
0x00000008 0x0000005a
0x00000009 0x00000061
0x0000000a 0x0000006a
0x0000000b 0x00000071
0x00010000 0x00000025
0x00010001 0x0000002c
0x00010002 0x00000035
0x00010003 0x0000003d
0x00010004 0x00000045
0x00010005 0x0000004e
0x00010006 0x00000057
0x00010007 0x00000061
0x00010008 0x0000006b
0x00010009 0x00000076
0x00020000 0x00000029
0x00020001 0x00000033
0x00020002 0x0000003d
0x00020003 0x00000049
0x00020004 0x00000056
0x00020005 0x00000061
0x00020006 0x0000006d
0x00030000 0x00000021
0x00030001 0x0000002a
0x00030002 0x0000003c
0x00030003 0x0000004e>;
#thermal-sensor-cells = <1>;
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 3>;
trips {
cpu_alert: cpu-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit: cpu-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
};
};
};
};
dspi0: dspi@2100000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;

212
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts Normal file
Просмотреть файл

@ -0,0 +1,212 @@
/*
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016, Freescale Semiconductor, Inc.
*
* Shaohui Xie <Shaohui.Xie@nxp.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "fsl-ls1046a.dtsi"
/ {
model = "LS1046A QDS Board";
compatible = "fsl,ls1046a-qds", "fsl,ls1046a";
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
gpio3 = &gpio3;
serial0 = &duart0;
serial1 = &duart1;
serial2 = &duart2;
serial3 = &duart3;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&dspi {
bus-num = <0>;
status = "okay";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a11", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
};
flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst25wf040b", "jedec,spi-nor";
spi-cpol;
spi-cpha;
reg = <1>;
spi-max-frequency = <10000000>;
};
flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "en25s64", "jedec,spi-nor";
spi-cpol;
spi-cpha;
reg = <2>;
spi-max-frequency = <10000000>;
};
};
&duart0 {
status = "okay";
};
&duart1 {
status = "okay";
};
&i2c0 {
status = "okay";
pca9547@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
/* IRQ10_B */
interrupts = <0 150 0x4>;
};
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
};
eeprom@57 {
compatible = "atmel,24c512";
reg = <0x57>;
};
temp-sensor@4c {
compatible = "adi,adt7461a";
reg = <0x4c>;
};
};
};
};
&ifc {
#address-cells = <2>;
#size-cells = <1>;
/* NOR, NAND Flashes and FPGA on board */
ranges = <0x0 0x0 0x0 0x60000000 0x08000000
0x1 0x0 0x0 0x7e800000 0x00010000
0x2 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
nor@0,0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@1,0 {
compatible = "fsl,ifc-nand";
reg = <0x1 0x0 0x10000>;
};
fpga: board-control@2,0 {
compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis";
reg = <0x2 0x0 0x0000100>;
};
};
&lpuart0 {
status = "okay";
};
&qspi {
num-cs = <2>;
bus-num = <0>;
status = "okay";
qflash0: s25fl128s@0 {
compatible = "spansion,m25p80";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <20000000>;
reg = <0>;
};
};

150
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts Normal file
Просмотреть файл

@ -0,0 +1,150 @@
/*
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016, Freescale Semiconductor, Inc.
*
* Mingkai Hu <mingkai.hu@nxp.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "fsl-ls1046a.dtsi"
/ {
model = "LS1046A RDB Board";
compatible = "fsl,ls1046a-rdb", "fsl,ls1046a";
aliases {
serial0 = &duart0;
serial1 = &duart1;
serial2 = &duart2;
serial3 = &duart3;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&duart0 {
status = "okay";
};
&duart1 {
status = "okay";
};
&i2c0 {
status = "okay";
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
temp-sensor@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x52>;
};
eeprom@57 {
compatible = "atmel,24c512";
reg = <0x53>;
};
};
&i2c3 {
status = "okay";
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
};
};
&ifc {
#address-cells = <2>;
#size-cells = <1>;
/* NAND Flashe and CPLD on board */
ranges = <0x0 0x0 0x0 0x7e800000 0x00010000
0x2 0x0 0x0 0x7fb00000 0x00000100>;
status = "okay";
nand@0,0 {
compatible = "fsl,ifc-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x0 0x10000>;
};
cpld: board-control@2,0 {
compatible = "fsl,ls1046ardb-cpld";
reg = <0x2 0x0 0x0000100>;
};
};
&qspi {
num-cs = <2>;
bus-num = <0>;
status = "okay";
qflash0: s25fs512s@0 {
compatible = "spansion,m25p80";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <20000000>;
reg = <0>;
};
qflash1: s25fs512s@1 {
compatible = "spansion,m25p80";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <20000000>;
reg = <1>;
};
};

515
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi Normal file
Просмотреть файл

@ -0,0 +1,515 @@
/*
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016, Freescale Semiconductor, Inc.
*
* Mingkai Hu <mingkai.hu@nxp.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPLv2 or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "fsl,ls1046a";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
crypto = &crypto;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x0>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x1>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x2>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x3>;
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
};
l2: l2-cache {
compatible = "cache";
};
};
idle-states {
/*
* PSCI node is not added default, U-boot will add missing
* parts if it determines to use PSCI.
*/
entry-method = "arm,psci";
CPU_PH20: cpu-ph20 {
compatible = "arm,idle-state";
idle-state-name = "PH20";
arm,psci-suspend-param = <0x00010000>;
entry-latency-us = <1000>;
exit-latency-us = <1000>;
min-residency-us = <3000>;
};
};
memory@80000000 {
device_type = "memory";
};
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
clock-output-names = "sysclk";
};
reboot {
compatible ="syscon-reboot";
regmap = <&dcfg>;
offset = <0xb0>;
mask = <0x02>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xf) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_RAW(0xf) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_RAW(0xf) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_RAW(0xf) |
IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
compatible = "arm,cortex-a72-pmu";
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,
<&cpu3>;
};
gic: interrupt-controller@1400000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x1410000 0 0x10000>, /* GICD */
<0x0 0x1420000 0 0x20000>, /* GICC */
<0x0 0x1440000 0 0x20000>, /* GICH */
<0x0 0x1460000 0 0x20000>; /* GICV */
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
IRQ_TYPE_LEVEL_LOW)>;
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
ddr: memory-controller@1080000 {
compatible = "fsl,qoriq-memory-controller";
reg = <0x0 0x1080000 0x0 0x1000>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
big-endian;
};
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
};
qspi: quadspi@1550000 {
compatible = "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x1550000 0x0 0x10000>,
<0x0 0x40000000 0x0 0x10000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
big-endian;
fsl,qspi-has-second-chip;
status = "disabled";
};
esdhc: esdhc@1560000 {
compatible = "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
bus-width = <4>;
};
scfg: scfg@1570000 {
compatible = "fsl,ls1046a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
big-endian;
};
crypto: crypto@1700000 {
compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
"fsl,sec-v4.0";
fsl,sec-era = <8>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x00 0x1700000 0x100000>;
reg = <0x00 0x1700000 0x0 0x100000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
sec_jr0: jr@10000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr@20000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr@30000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr@40000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
};
};
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1046a-dcfg", "syscon";
reg = <0x0 0x1ee0000 0x0 0x10000>;
big-endian;
};
clockgen: clocking@1ee1000 {
compatible = "fsl,ls1046a-clockgen";
reg = <0x0 0x1ee1000 0x0 0x1000>;
#clock-cells = <2>;
clocks = <&sysclk>;
};
dspi: dspi@2100000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&clockgen 4 1>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
};
i2c0: i2c@2180000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
dmas = <&edma0 1 39>,
<&edma0 1 38>;
dma-names = "tx", "rx";
status = "disabled";
};
i2c1: i2c@2190000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
status = "disabled";
};
i2c2: i2c@21a0000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
status = "disabled";
};
i2c3: i2c@21b0000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x21b0000 0x0 0x10000>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
status = "disabled";
};
duart0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
};
duart1: serial@21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
};
duart2: serial@21d0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
};
duart3: serial@21d0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
};
gpio0: gpio@2300000 {
compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio1: gpio@2310000 {
compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2310000 0x0 0x10000>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@2320000 {
compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2320000 0x0 0x10000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@2330000 {
compatible = "fsl,qoriq-gpio";
reg = <0x0 0x2330000 0x0 0x10000>;
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
lpuart0: serial@2950000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 0>;
clock-names = "ipg";
status = "disabled";
};
lpuart1: serial@2960000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2960000 0x0 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart2: serial@2970000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2970000 0x0 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart3: serial@2980000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2980000 0x0 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart4: serial@2990000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2990000 0x0 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clock-names = "ipg";
status = "disabled";
};
lpuart5: serial@29a0000 {
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x29a0000 0x0 0x1000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
clock-names = "ipg";
status = "disabled";
};
wdog0: watchdog@2ad0000 {
compatible = "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
big-endian;
};
edma0: edma@2c00000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
reg = <0x0 0x2c00000 0x0 0x10000>,
<0x0 0x2c10000 0x0 0x10000>,
<0x0 0x2c20000 0x0 0x10000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma-tx", "edma-err";
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
clocks = <&clockgen 4 1>,
<&clockgen 4 1>;
};
usb0: usb@2f00000 {
compatible = "snps,dwc3";
reg = <0x0 0x2f00000 0x0 0x10000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
};
usb1: usb@3000000 {
compatible = "snps,dwc3";
reg = <0x0 0x3000000 0x0 0x10000>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
};
usb2: usb@3100000 {
compatible = "snps,dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
};
sata: sata@3200000 {
compatible = "fsl,ls1046a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen 4 1>;
};
};
};

2
arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
Просмотреть файл

@ -46,7 +46,7 @@
/dts-v1/;
/include/ "fsl-ls2080a.dtsi"
#include "fsl-ls2080a.dtsi"
/ {
model = "Freescale Layerscape 2080a QDS Board";

2
arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
Просмотреть файл

@ -46,7 +46,7 @@
/dts-v1/;
/include/ "fsl-ls2080a.dtsi"
#include "fsl-ls2080a.dtsi"
/ {
model = "Freescale Layerscape 2080a RDB Board";

2
arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts
Просмотреть файл

@ -46,7 +46,7 @@
/dts-v1/;
/include/ "fsl-ls2080a.dtsi"
#include "fsl-ls2080a.dtsi"
/ {
model = "Freescale Layerscape 2080a software Simulator model";

116
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
Просмотреть файл

@ -44,6 +44,8 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "fsl,ls2080a";
interrupt-parent = <&gic>;
@ -62,15 +64,16 @@
*/
/* We have 4 clusters having 2 Cortex-A57 cores each */
cpu@0 {
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0>;
clocks = <&clockgen 1 0>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
};
cpu@1 {
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1>;
@ -78,15 +81,16 @@
next-level-cache = <&cluster0_l2>;
};
cpu@100 {
cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x100>;
clocks = <&clockgen 1 1>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
};
cpu@101 {
cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x101>;
@ -94,15 +98,16 @@
next-level-cache = <&cluster1_l2>;
};
cpu@200 {
cpu4: cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x200>;
clocks = <&clockgen 1 2>;
next-level-cache = <&cluster2_l2>;
#cooling-cells = <2>;
};
cpu@201 {
cpu5: cpu@201 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x201>;
@ -110,15 +115,16 @@
next-level-cache = <&cluster2_l2>;
};
cpu@300 {
cpu6: cpu@300 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x300>;
clocks = <&clockgen 1 3>;
next-level-cache = <&cluster3_l2>;
#cooling-cells = <2>;
};
cpu@301 {
cpu7: cpu@301 {
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x301>;
@ -222,6 +228,100 @@
little-endian;
};
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
interrupts = <0 23 0x4>;
fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
fsl,tmu-calibration = <0x00000000 0x00000026
0x00000001 0x0000002d
0x00000002 0x00000032
0x00000003 0x00000039
0x00000004 0x0000003f
0x00000005 0x00000046
0x00000006 0x0000004d
0x00000007 0x00000054
0x00000008 0x0000005a
0x00000009 0x00000061
0x0000000a 0x0000006a
0x0000000b 0x00000071
0x00010000 0x00000025
0x00010001 0x0000002c
0x00010002 0x00000035
0x00010003 0x0000003d
0x00010004 0x00000045
0x00010005 0x0000004e
0x00010006 0x00000057
0x00010007 0x00000061
0x00010008 0x0000006b
0x00010009 0x00000076
0x00020000 0x00000029
0x00020001 0x00000033
0x00020002 0x0000003d
0x00020003 0x00000049
0x00020004 0x00000056
0x00020005 0x00000061
0x00020006 0x0000006d
0x00030000 0x00000021
0x00030001 0x0000002a
0x00030002 0x0000003c
0x00030003 0x0000004e>;
little-endian;
#thermal-sensor-cells = <1>;
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 4>;
trips {
cpu_alert: cpu-alert {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit: cpu-crit {
temperature = <85000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu_alert>;
cooling-device =
<&cpu2 THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
};
map2 {
trip = <&cpu_alert>;
cooling-device =
<&cpu4 THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
};
map3 {
trip = <&cpu_alert>;
cooling-device =
<&cpu6 THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
};
};
};
};
serial0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;

1
arch/arm64/boot/dts/hisilicon/Makefile
Просмотреть файл

@ -1,6 +1,7 @@
dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
dtb-$(CONFIG_ARCH_HISI) += hip06-d03.dtb
dtb-$(CONFIG_ARCH_HISI) += hip07-d05.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)

8
arch/arm64/boot/dts/hisilicon/hip06-d03.dts
Просмотреть файл

@ -41,18 +41,10 @@
status = "ok";
};
&sas0 {
status = "ok";
};
&sas1 {
status = "ok";
};
&sas2 {
status = "ok";
};
&usb_ohci {
status = "ok";
};

23
arch/arm64/boot/dts/hisilicon/hip06.dtsi
Просмотреть файл

@ -318,11 +318,17 @@
#size-cells = <2>;
ranges;
refclk: refclk {
compatible = "fixed-clock";
clock-frequency = <50000000>;
#clock-cells = <0>;
};
usb_ohci: ohci@a7030000 {
compatible = "generic-ohci";
reg = <0x0 0xa7030000 0x0 0x10000>;
interrupt-parent = <&mbigen_usb>;
interrupts = <64 4>;
interrupts = <640 4>;
dma-coherent;
status = "disabled";
};
@ -331,7 +337,7 @@
compatible = "generic-ehci";
reg = <0x0 0xa7020000 0x0 0x10000>;
interrupt-parent = <&mbigen_usb>;
interrupts = <65 4>;
interrupts = <641 4>;
dma-coherent;
status = "disabled";
};
@ -508,7 +514,7 @@
};
};
eth0: ethernet@4{
eth0: ethernet-4{
compatible = "hisilicon,hns-nic-v2";
ae-handle = <&dsaf0>;
port-idx-in-ae = <4>;
@ -517,7 +523,7 @@
dma-coherent;
};
eth1: ethernet@5{
eth1: ethernet-5{
compatible = "hisilicon,hns-nic-v2";
ae-handle = <&dsaf0>;
port-idx-in-ae = <5>;
@ -526,7 +532,7 @@
dma-coherent;
};
eth2: ethernet@0{
eth2: ethernet-0{
compatible = "hisilicon,hns-nic-v2";
ae-handle = <&dsaf0>;
port-idx-in-ae = <0>;
@ -535,7 +541,7 @@
dma-coherent;
};
eth3: ethernet@1{
eth3: ethernet-1{
compatible = "hisilicon,hns-nic-v2";
ae-handle = <&dsaf0>;
port-idx-in-ae = <1>;
@ -552,6 +558,7 @@
ctrl-reset-reg = <0xa60>;
ctrl-reset-sts-reg = <0x5a30>;
ctrl-clock-ena-reg = <0x338>;
clocks = <&refclk 0>;
queue-count = <16>;
phy-count = <8>;
dma-coherent;
@ -590,10 +597,11 @@
reg = <0 0xa2000000 0 0x10000>;
sas-addr = [50 01 88 20 16 00 00 00];
hisilicon,sas-syscon = <&pcie_subctl>;
am-max-trans;
hip06-sas-v2-quirk-amt;
ctrl-reset-reg = <0xa18>;
ctrl-reset-sts-reg = <0x5a0c>;
ctrl-clock-ena-reg = <0x318>;
clocks = <&refclk 0>;
queue-count = <16>;
phy-count = <8>;
dma-coherent;
@ -635,6 +643,7 @@
ctrl-reset-reg = <0xae0>;
ctrl-reset-sts-reg = <0x5a70>;
ctrl-clock-ena-reg = <0x3a8>;
clocks = <&refclk 0>;
queue-count = <16>;
phy-count = <9>;
dma-coherent;

66
arch/arm64/boot/dts/hisilicon/hip07-d05.dts Normal file
Просмотреть файл

@ -0,0 +1,66 @@
/**
* dts file for Hisilicon D05 Development Board
*
* Copyright (C) 2016 Hisilicon Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*
*/
/dts-v1/;
#include "hip07.dtsi"
/ {
model = "Hisilicon Hip07 D05 Development Board";
compatible = "hisilicon,hip07-d05";
/* the mem node will be updated by UEFI. */
memory@0 {
device_type = "memory";
reg = <0x0 0x00000000 0x0 0x40000000>;
numa-node-id = <0>;
};
distance-map {
compatible = "numa-distance-map-v1";
distance-matrix = <0 0 10>,
<0 1 15>,
<0 2 20>,
<0 3 25>,
<1 0 15>,
<1 1 10>,
<1 2 25>,
<1 3 30>,
<2 0 20>,
<2 1 25>,
<2 2 10>,
<2 3 15>,
<3 0 25>,
<3 1 30>,
<3 2 15>,
<3 3 10>;
};
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&uart0 {
status = "ok";
};
&usb_ohci {
status = "ok";
};
&usb_ehci {
status = "ok";
};

1059
arch/arm64/boot/dts/hisilicon/hip07.dtsi Normal file
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

1
arch/arm64/boot/dts/marvell/Makefile
Просмотреть файл

@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb
# Mvebu SoC Family
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb

2
arch/arm64/boot/dts/marvell/armada-3720-db.dts
Просмотреть файл

@ -56,7 +56,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@0 {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
};

82
arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts Normal file
Просмотреть файл

@ -0,0 +1,82 @@
/*
* Device Tree file for Globalscale Marvell ESPRESSOBin Board
* Copyright (C) 2016 Marvell
*
* Romain Perier <romain.perier@free-electrons.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "armada-372x.dtsi"
/ {
model = "Globalscale Marvell ESPRESSOBin Board";
compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
};
};
/* J9 */
&pcie0 {
status = "okay";
};
/* J6 */
&sata {
status = "okay";
};
/* Exported on the micro USB connector J5 through an FTDI */
&uart0 {
status = "okay";
};
/* J7 */
&usb3 {
status = "okay";
};

2
arch/arm64/boot/dts/marvell/armada-37xx.dtsi
Просмотреть файл

@ -91,7 +91,7 @@
#size-cells = <2>;
ranges;
internal-regs {
internal-regs@d0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";

2
arch/arm64/boot/dts/marvell/armada-ap806.dtsi
Просмотреть файл

@ -71,7 +71,7 @@
interrupt-parent = <&gic>;
ranges;
config-space {
config-space@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";

2
arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
Просмотреть файл

@ -52,7 +52,7 @@
interrupt-parent = <&gic>;
ranges;
config-space {
config-space@f2000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";

2
arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
Просмотреть файл

@ -52,7 +52,7 @@
interrupt-parent = <&gic>;
ranges;
config-space {
config-space@f4000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";

2
arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts
Просмотреть файл

@ -54,7 +54,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@1000000 {
device_type = "memory";
/* the first 16MB is for firmwares' usage */
reg = <0 0x01000000 0 0x7f000000>;

2
arch/arm64/boot/dts/marvell/berlin4ct-stb.dts
Просмотреть файл

@ -54,7 +54,7 @@
stdout-path = "serial0:115200n8";
};
memory {
memory@1000000 {
device_type = "memory";
/* the first 16MB is for firmwares' usage */
reg = <0 0x01000000 0 0x7f000000>;

2
arch/arm64/boot/dts/marvell/berlin4ct.dtsi
Просмотреть файл

@ -142,7 +142,7 @@
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
soc {
soc@f7000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;

1
arch/arm64/boot/dts/nvidia/Makefile
Просмотреть файл

@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
always := $(dtb-y)
clean-files := *.dtb

8
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts Normal file
Просмотреть файл

@ -0,0 +1,8 @@
/dts-v1/;
#include "tegra186-p3310.dtsi"
/ {
model = "NVIDIA Tegra186 P2771-0000 Development Board";
compatible = "nvidia,p2771-0000", "nvidia,tegra186";
};

64
arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi Normal file
Просмотреть файл

@ -0,0 +1,64 @@
#include "tegra186.dtsi"
/ {
model = "NVIDIA Tegra186 P3310 Processor Module";
compatible = "nvidia,p3310", "nvidia,tegra186";
aliases {
serial0 = &uarta;
};
chosen {
bootargs = "earlycon console=ttyS0,115200n8";
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x0 0x80000000 0x2 0x00000000>;
};
serial@3100000 {
status = "okay";
};
hsp@3c00000 {
status = "okay";
};
cpus {
cpu@0 {
enable-method = "psci";
};
cpu@1 {
enable-method = "psci";
};
cpu@2 {
enable-method = "psci";
};
cpu@3 {
enable-method = "psci";
};
cpu@4 {
enable-method = "psci";
};
cpu@5 {
enable-method = "psci";
};
};
bpmp {
status = "okay";
};
psci {
compatible = "arm,psci-1.0";
status = "okay";
method = "smc";
};
};

398
arch/arm64/boot/dts/nvidia/tegra186.dtsi Normal file
Просмотреть файл

@ -0,0 +1,398 @@
#include <dt-bindings/gpio/tegra186-gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "nvidia,tegra186";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
gpio: gpio@2200000 {
compatible = "nvidia,tegra186-gpio";
reg-names = "security", "gpio";
reg = <0x0 0x2200000 0x0 0x10000>,
<0x0 0x2210000 0x0 0x10000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
#gpio-cells = <2>;
gpio-controller;
};
uarta: serial@3100000 {
compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
reg = <0x0 0x03100000 0x0 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp 55>;
clock-names = "serial";
resets = <&bpmp 47>;
reset-names = "serial";
status = "disabled";
};
uartb: serial@3110000 {
compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
reg = <0x0 0x03110000 0x0 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp 56>;
clock-names = "serial";
resets = <&bpmp 48>;
reset-names = "serial";
status = "disabled";
};
uartd: serial@3130000 {
compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
reg = <0x0 0x03130000 0x0 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp 77>;
clock-names = "serial";
resets = <&bpmp 50>;
reset-names = "serial";
status = "disabled";
};
uarte: serial@3140000 {
compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
reg = <0x0 0x03140000 0x0 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp 194>;
clock-names = "serial";
resets = <&bpmp 132>;
reset-names = "serial";
status = "disabled";
};
uartf: serial@3150000 {
compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
reg = <0x0 0x03150000 0x0 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp 195>;
clock-names = "serial";
resets = <&bpmp 111>;
reset-names = "serial";
status = "disabled";
};
gen1_i2c: i2c@3160000 {
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x03160000 0x0 0x10000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&bpmp 47>;
clock-names = "div-clk";
resets = <&bpmp 19>;
reset-names = "i2c";
status = "disabled";
};
cam_i2c: i2c@3180000 {
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x03180000 0x0 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&bpmp 75>;
clock-names = "div-clk";
resets = <&bpmp 21>;
reset-names = "i2c";
status = "disabled";
};
/* shares pads with dpaux1 */
dp_aux_ch1_i2c: i2c@3190000 {
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x03190000 0x0 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&bpmp 86>;
clock-names = "div-clk";
resets = <&bpmp 22>;
reset-names = "i2c";
status = "disabled";
};
/* controlled by BPMP, should not be enabled */
pwr_i2c: i2c@31a0000 {
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x031a0000 0x0 0x10000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&bpmp 48>;
clock-names = "div-clk";
resets = <&bpmp 23>;
reset-names = "i2c";
status = "disabled";
};
/* shares pads with dpaux0 */
dp_aux_ch0_i2c: i2c@31b0000 {
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x031b0000 0x0 0x10000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&bpmp 125>;
clock-names = "div-clk";
resets = <&bpmp 24>;
reset-names = "i2c";
status = "disabled";
};
gen7_i2c: i2c@31c0000 {
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x031c0000 0x0 0x10000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&bpmp 182>;
clock-names = "div-clk";
resets = <&bpmp 81>;
reset-names = "i2c";
status = "disabled";
};
gen9_i2c: i2c@31e0000 {
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x031e0000 0x0 0x10000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&bpmp 183>;
clock-names = "div-clk";
resets = <&bpmp 83>;
reset-names = "i2c";
status = "disabled";
};
sdmmc1: sdhci@3400000 {
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03400000 0x0 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp 52>;
clock-names = "sdhci";
resets = <&bpmp 33>;
reset-names = "sdhci";
status = "disabled";
};
sdmmc2: sdhci@3420000 {
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03420000 0x0 0x10000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp 53>;
clock-names = "sdhci";
resets = <&bpmp 34>;
reset-names = "sdhci";
status = "disabled";
};
sdmmc3: sdhci@3440000 {
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03440000 0x0 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp 76>;
clock-names = "sdhci";
resets = <&bpmp 35>;
reset-names = "sdhci";
status = "disabled";
};
sdmmc4: sdhci@3460000 {
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03460000 0x0 0x10000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp 54>;
clock-names = "sdhci";
resets = <&bpmp 36>;
reset-names = "sdhci";
status = "disabled";
};
gic: interrupt-controller@3881000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x0 0x03881000 0x0 0x1000>,
<0x0 0x03882000 0x0 0x2000>;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
interrupt-parent = <&gic>;
};
hsp_top0: hsp@3c00000 {
compatible = "nvidia,tegra186-hsp";
reg = <0x0 0x03c00000 0x0 0xa0000>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "doorbell";
#mbox-cells = <2>;
status = "disabled";
};
gen2_i2c: i2c@c240000 {
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x0c240000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&bpmp 218>;
clock-names = "div-clk";
resets = <&bpmp 20>;
reset-names = "i2c";
status = "disabled";
};
gen8_i2c: i2c@c250000 {
compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c";
reg = <0x0 0x0c250000 0x0 0x10000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&bpmp 219>;
clock-names = "div-clk";
resets = <&bpmp 82>;
reset-names = "i2c";
status = "disabled";
};
uartc: serial@c280000 {
compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
reg = <0x0 0x0c280000 0x0 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp 215>;
clock-names = "serial";
resets = <&bpmp 49>;
reset-names = "serial";
status = "disabled";
};
uartg: serial@c290000 {
compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
reg = <0x0 0x0c290000 0x0 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp 216>;
clock-names = "serial";
resets = <&bpmp 112>;
reset-names = "serial";
status = "disabled";
};
gpio_aon: gpio@c2f0000 {
compatible = "nvidia,tegra186-gpio-aon";
reg-names = "security", "gpio";
reg = <0x0 0xc2f0000 0x0 0x1000>,
<0x0 0xc2f1000 0x0 0x1000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
sysram@30000000 {
compatible = "nvidia,tegra186-sysram", "mmio-sram";
reg = <0x0 0x30000000 0x0 0x50000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>;
cpu_bpmp_tx: shmem@4e000 {
compatible = "nvidia,tegra186-bpmp-shmem";
reg = <0x0 0x4e000 0x0 0x1000>;
label = "cpu-bpmp-tx";
pool;
};
cpu_bpmp_rx: shmem@4f000 {
compatible = "nvidia,tegra186-bpmp-shmem";
reg = <0x0 0x4f000 0x0 0x1000>;
label = "cpu-bpmp-rx";
pool;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "nvidia,tegra186-denver", "arm,armv8";
device_type = "cpu";
reg = <0x000>;
};
cpu@1 {
compatible = "nvidia,tegra186-denver", "arm,armv8";
device_type = "cpu";
reg = <0x001>;
};
cpu@2 {
compatible = "arm,cortex-a57", "arm,armv8";
device_type = "cpu";
reg = <0x100>;
};
cpu@3 {
compatible = "arm,cortex-a57", "arm,armv8";
device_type = "cpu";
reg = <0x101>;
};
cpu@4 {
compatible = "arm,cortex-a57", "arm,armv8";
device_type = "cpu";
reg = <0x102>;
};
cpu@5 {
compatible = "arm,cortex-a57", "arm,armv8";
device_type = "cpu";
reg = <0x103>;
};
};
bpmp: bpmp {
compatible = "nvidia,tegra186-bpmp";
mboxes = <&hsp_top0 0 19>;
shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
#clock-cells = <1>;
#reset-cells = <1>;
bpmp_i2c: i2c {
compatible = "nvidia,tegra186-bpmp-i2c";
nvidia,bpmp-bus-id = <5>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&gic>;
};
};

7
arch/arm64/boot/dts/qcom/Makefile
Просмотреть файл

@ -1,6 +1,9 @@
dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)

73
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
Просмотреть файл

@ -15,6 +15,7 @@
#include "pm8916.dtsi"
#include "apq8016-sbc-soc-pins.dtsi"
#include "apq8016-sbc-pmic-pins.dtsi"
#include <dt-bindings/sound/apq8016-lpass.h>
/ {
aliases {
@ -251,6 +252,60 @@
vddio-supply = <&pm8916_l6>;
};
};
lpass_codec: codec{
status = "okay";
};
/*
Internal Codec
playback - Primary MI2S
capture - Ter MI2S
External Primary:
playback - secondary MI2S
capture - Quat MI2S
External Secondary:
playback - Quat MI2S
capture - Quat MI2S
*/
sound: sound {
compatible = "qcom,apq8016-sbc-sndcard";
reg = <0x07702000 0x4>, <0x07702004 0x4>;
reg-names = "mic-iomux", "spkr-iomux";
status = "okay";
pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
pinctrl-names = "default", "sleep";
qcom,model = "DB410c";
qcom,audio-routing =
"AMIC2", "MIC BIAS Internal2",
"AMIC3", "MIC BIAS External1";
internal-codec-playback-dai-link@0 { /* I2S - Internal codec */
link-name = "WCD";
cpu { /* PRIMARY */
sound-dai = <&lpass MI2S_PRIMARY>;
};
codec {
sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
};
};
internal-codec-capture-dai-link@0 { /* I2S - Internal codec */
link-name = "WCD-Capture";
cpu { /* PRIMARY */
sound-dai = <&lpass MI2S_TERTIARY>;
};
codec {
sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
};
};
};
};
usb2513 {
@ -278,6 +333,12 @@
};
};
&wcd_codec {
status = "okay";
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
clock-names = "mclk";
};
&smd_rpm_regulators {
vdd_l1_l2_l3-supply = <&pm8916_s3>;
vdd_l5-supply = <&pm8916_s3>;
@ -308,8 +369,8 @@
};
l2 {
regulator-min-microvolt = <375000>;
regulator-max-microvolt = <1525000>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
l3 {
@ -328,8 +389,8 @@
};
l6 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
l7 {
@ -388,8 +449,8 @@
};
l17 {
regulator-min-microvolt = <1750000>;
regulator-max-microvolt = <3337000>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
l18 {

15
arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi Normal file
Просмотреть файл

@ -0,0 +1,15 @@
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
&pm8994_gpios {
pinctrl-names = "default";
pinctrl-0 = <&ls_exp_gpio_f>;
ls_exp_gpio_f: pm8916_mpp4 {
pinconf {
pins = "gpio5";
output-low;
power-source = <2>; // PM8994_GPIO_S4, 1.8V
};
};
};

2
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
Просмотреть файл

@ -12,7 +12,9 @@
*/
#include "msm8996.dtsi"
#include "pm8994.dtsi"
#include "apq8096-db820c-pins.dtsi"
#include "apq8096-db820c-pmic-pins.dtsi"
/ {
aliases {

73
arch/arm64/boot/dts/qcom/msm8916.dtsi
Просмотреть файл

@ -77,7 +77,7 @@
no-map;
};
mpss@86800000 {
mpss_mem: mpss@86800000 {
reg = <0x0 0x86800000 0x0 0x2b00000>;
no-map;
};
@ -504,6 +504,15 @@
reg-names = "lpass-lpaif";
};
lpass_codec: codec{
compatible = "qcom,msm8916-wcd-digital-codec";
reg = <0x0771c000 0x400>;
clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
<&gcc GCC_CODEC_DIGCODEC_CLK>;
clock-names = "ahbix-clk", "mclk";
#sound-dai-cells = <1>;
};
sdhc_1: sdhci@07824000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
@ -512,8 +521,10 @@
interrupts = <0 123 0>, <0 138 0>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>;
clock-names = "core", "iface";
<&gcc GCC_SDCC1_AHB_CLK>,
<&xo_board>;
clock-names = "core", "iface", "xo";
mmc-ddr-1_8v;
bus-width = <8>;
non-removable;
status = "disabled";
@ -527,8 +538,9 @@
interrupts = <0 125 0>, <0 221 0>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>;
clock-names = "core", "iface";
<&gcc GCC_SDCC2_AHB_CLK>,
<&xo_board>;
clock-names = "core", "iface", "xo";
bus-width = <4>;
status = "disabled";
};
@ -801,6 +813,49 @@
clock-names = "iface_clk";
};
};
hexagon@4080000 {
compatible = "qcom,q6v5-pil";
reg = <0x04080000 0x100>,
<0x04020000 0x040>;
reg-names = "qdsp6", "rmb";
interrupts-extended = <&intc 0 24 1>,
<&hexagon_smp2p_in 0 0>,
<&hexagon_smp2p_in 1 0>,
<&hexagon_smp2p_in 2 0>,
<&hexagon_smp2p_in 3 0>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";
clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
<&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
<&gcc GCC_BOOT_ROM_AHB_CLK>;
clock-names = "iface", "bus", "mem";
qcom,smem-states = <&hexagon_smp2p_out 0>;
qcom,smem-state-names = "stop";
resets = <&scm 0>;
reset-names = "mss_restart";
mx-supply = <&pm8916_l3>;
pll-supply = <&pm8916_l7>;
qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
status = "disabled";
mba {
memory-region = <&mba_mem>;
};
mpss {
memory-region = <&mpss_mem>;
};
};
};
smd {
@ -848,6 +903,14 @@
};
};
};
hexagon {
interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
qcom,smd-edge = <0>;
qcom,ipc = <&apcs 8 12>;
qcom,remote-pid = <1>;
};
};
hexagon-smp2p {

41
arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts Normal file
Просмотреть файл

@ -0,0 +1,41 @@
/* Copyright (c) 2015, LGE Inc. All rights reserved.
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
#include "msm8992.dtsi"
/ {
model = "LG Nexus 5X";
compatible = "lg,bullhead", "qcom,msm8992";
/* required for bootloader to select correct board */
qcom,board-id = <0xb64 0>;
qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
aliases {
serial0 = &blsp1_uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
serial@f991e000 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_uart2_default>;
pinctrl-1 = <&blsp1_uart2_sleep>;
};
};
};

38
arch/arm64/boot/dts/qcom/msm8992-pins.dtsi Normal file
Просмотреть файл

@ -0,0 +1,38 @@
/*
* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&msmgpio {
blsp1_uart2_default: blsp1_uart2_default {
pinmux {
function = "blsp_uart2";
pins = "gpio4", "gpio5";
};
pinconf {
pins = "gpio4", "gpio5";
drive-strength = <16>;
bias-disable;
};
};
blsp1_uart2_sleep: blsp1_uart2_sleep {
pinmux {
function = "gpio";
pins = "gpio4", "gpio5";
};
pinconf {
pins = "gpio4", "gpio5";
drive-strength = <2>;
bias-pull-down;
};
};
};

184
arch/arm64/boot/dts/qcom/msm8992.dtsi Normal file
Просмотреть файл

@ -0,0 +1,184 @@
/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8994.h>
/ {
model = "Qualcomm Technologies, Inc. MSM 8992";
compatible = "qcom,msm8992";
// msm-id needed by bootloader for selecting correct blob
qcom,msm-id = <251 0>, <252 0>;
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
};
};
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
xo_board: xo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
intc: interrupt-controller@f9000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0xf9000000 0x1000>,
<0xf9002000 0x1000>;
};
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0xf9020000 0x1000>;
frame@f9021000 {
frame-number = <0>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9021000 0x1000>,
<0xf9022000 0x1000>;
};
frame@f9023000 {
frame-number = <1>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9023000 0x1000>;
status = "disabled";
};
frame@f9024000 {
frame-number = <2>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9024000 0x1000>;
status = "disabled";
};
frame@f9025000 {
frame-number = <3>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9025000 0x1000>;
status = "disabled";
};
frame@f9026000 {
frame-number = <4>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9026000 0x1000>;
status = "disabled";
};
frame@f9027000 {
frame-number = <5>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9027000 0x1000>;
status = "disabled";
};
frame@f9028000 {
frame-number = <6>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9028000 0x1000>;
status = "disabled";
};
};
restart@fc4ab000 {
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
};
msmgpio: pinctrl@fd510000 {
compatible = "qcom,msm8994-pinctrl";
reg = <0xfd510000 0x4000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>;
status = "disabled";
clock-names = "core", "iface";
clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
<&clock_gcc GCC_BLSP1_AHB_CLK>;
};
clock_gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-msm8994";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0xfc400000 0x2000>;
};
};
memory {
device_type = "memory";
reg = <0 0 0 0>; // bootloader will update
};
};
#include "msm8992-pins.dtsi"

40
arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts Normal file
Просмотреть файл

@ -0,0 +1,40 @@
/* Copyright (c) 2015, Huawei Inc. All rights reserved.
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
#include "msm8994.dtsi"
/ {
model = "Huawei Nexus 6P";
compatible = "huawei,angler", "qcom,msm8994";
/* required for bootloader to select correct board */
qcom,board-id = <8026 0>;
aliases {
serial0 = &blsp1_uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
soc {
serial@f991e000 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp1_uart2_default>;
pinctrl-1 = <&blsp1_uart2_sleep>;
};
};
};

38
arch/arm64/boot/dts/qcom/msm8994-pins.dtsi Normal file
Просмотреть файл

@ -0,0 +1,38 @@
/*
* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&msmgpio {
blsp1_uart2_default: blsp1_uart2_default {
pinmux {
function = "blsp_uart2";
pins = "gpio4", "gpio5";
};
pinconf {
pins = "gpio4", "gpio5";
drive-strength = <16>;
bias-disable;
};
};
blsp1_uart2_sleep: blsp1_uart2_sleep {
pinmux {
function = "gpio";
pins = "gpio4", "gpio5";
};
pinconf {
pins = "gpio4", "gpio5";
drive-strength = <2>;
bias-pull-down;
};
};
};

216
arch/arm64/boot/dts/qcom/msm8994.dtsi Normal file
Просмотреть файл

@ -0,0 +1,216 @@
/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8994.h>
/ {
model = "Qualcomm Technologies, Inc. MSM 8994";
compatible = "qcom,msm8994";
// msm-id and pmic-id are required by bootloader for
// proper selection of dt blob
qcom,msm-id = <207 0x20000>;
qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
};
};
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <1 2 0xff08>,
<1 3 0xff08>,
<1 4 0xff08>,
<1 1 0xff08>;
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
intc: interrupt-controller@f9000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0xf9000000 0x1000>,
<0xf9002000 0x1000>;
};
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0xf9020000 0x1000>;
frame@f9021000 {
frame-number = <0>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9021000 0x1000>,
<0xf9022000 0x1000>;
};
frame@f9023000 {
frame-number = <1>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9023000 0x1000>;
status = "disabled";
};
frame@f9024000 {
frame-number = <2>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9024000 0x1000>;
status = "disabled";
};
frame@f9025000 {
frame-number = <3>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9025000 0x1000>;
status = "disabled";
};
frame@f9026000 {
frame-number = <4>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9026000 0x1000>;
status = "disabled";
};
frame@f9027000 {
frame-number = <5>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9027000 0x1000>;
status = "disabled";
};
frame@f9028000 {
frame-number = <6>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9028000 0x1000>;
status = "disabled";
};
};
restart@fc4ab000 {
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
};
msmgpio: pinctrl@fd510000 {
compatible = "qcom,msm8994-pinctrl";
reg = <0xfd510000 0x4000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clock-names = "core", "iface";
clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
<&clock_gcc GCC_BLSP1_AHB_CLK>;
};
tcsr_mutex_regs: syscon@fd484000 {
compatible = "syscon";
reg = <0xfd484000 0x2000>;
};
clock_gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-msm8994";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0xfc400000 0x2000>;
};
};
memory {
device_type = "memory";
// We expect the bootloader to fill in the reg
reg = <0 0 0 0>;
};
xo_board: xo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
smem_mem: smem_region@6a00000 {
reg = <0x0 0x6a00000 0x0 0x200000>;
no-map;
};
};
tcsr_mutex: hwlock {
compatible = "qcom,tcsr-mutex";
syscon = <&tcsr_mutex_regs 0 0x80>;
#hwlock-cells = <1>;
};
qcom,smem@6a00000 {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
hwlocks = <&tcsr_mutex 3>;
};
};
#include "msm8994-pins.dtsi"

91
arch/arm64/boot/dts/qcom/msm8996.dtsi
Просмотреть файл

@ -30,6 +30,42 @@
reg = <0 0 0 0>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
mba_region: mba@91500000 {
reg = <0x0 0x91500000 0x0 0x200000>;
no-map;
};
slpi_region: slpi@90b00000 {
reg = <0x0 0x90b00000 0x0 0xa00000>;
no-map;
};
venus_region: venus@90400000 {
reg = <0x0 0x90400000 0x0 0x700000>;
no-map;
};
adsp_region: adsp@8ea00000 {
reg = <0x0 0x8ea00000 0x0 0x1a00000>;
no-map;
};
mpss_region: mpss@88800000 {
reg = <0x0 0x88800000 0x0 0x6200000>;
no-map;
};
smem_mem: smem-mem@86000000 {
reg = <0x0 0x86000000 0x0 0x200000>;
no-map;
};
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
@ -192,14 +228,14 @@
};
clocks {
xo_board {
xo_board: xo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
clock-output-names = "xo_board";
};
sleep_clk {
sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32764>;
@ -212,12 +248,29 @@
method = "smc";
};
tcsr_mutex: hwlock {
compatible = "qcom,tcsr-mutex";
syscon = <&tcsr_mutex_regs 0 0x1000>;
#hwlock-cells = <1>;
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
hwlocks = <&tcsr_mutex 3>;
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
tcsr_mutex_regs: syscon@740000 {
compatible = "syscon";
reg = <0x740000 0x20000>;
};
intc: interrupt-controller@9bc0000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
@ -229,6 +282,11 @@
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
apcs: syscon@9820000 {
compatible = "syscon";
reg = <0x9820000 0x1000>;
};
gcc: clock-controller@300000 {
compatible = "qcom,gcc-msm8996";
#clock-cells = <1>;
@ -347,9 +405,10 @@
interrupts = <0 125 0>, <0 221 0>;
interrupt-names = "hc_irq", "pwr_irq";
clock-names = "iface", "core";
clock-names = "iface", "core", "xo";
clocks = <&gcc GCC_SDCC2_AHB_CLK>,
<&gcc GCC_SDCC2_APPS_CLK>;
<&gcc GCC_SDCC2_APPS_CLK>,
<&xo_board>;
bus-width = <4>;
};
@ -458,5 +517,29 @@
<825000000>;
};
};
adsp-smp2p {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 16 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
adsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,state-cells = <1>;
};
adsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
};
#include "msm8996-pins.dtsi"

Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше