[ARM] 4434/1: PXA: remove PXA_IRQ_SKIP

1. PXA_IRQ_SKIP is defined to be 7 on PXA25x so that the first IRQ
   starts from zero. This makes IRQ numbering inconsistent between
   PXA25x and PXA27x. Remove this macro so that the same IRQ_XXXXX
   definition has the same value on both PXA25x and PXA27x.

2. make IRQ_SSP3..IRQ_PWRI2C valid only if PXA27x is defined, this
   avoids unintentional use of these macros on PXA25x

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-pxa/irq.c

@@ -30,12 +30,12 @@
 
 static void pxa_mask_low_irq(unsigned int irq)
 {
-	ICMR &= ~(1 << (irq + PXA_IRQ_SKIP));
+	ICMR &= ~(1 << irq);
 }
 
 static void pxa_unmask_low_irq(unsigned int irq)
 {
-	ICMR |= (1 << (irq + PXA_IRQ_SKIP));
+	ICMR |= (1 << irq);
 }
 
 static int pxa_set_wake(unsigned int irq, unsigned int on)
@@ -75,12 +75,12 @@ static struct irq_chip pxa_internal_chip_low = {
 
 static void pxa_mask_high_irq(unsigned int irq)
 {
-	ICMR2 &= ~(1 << (irq - 32 + PXA_IRQ_SKIP));
+	ICMR2 &= ~(1 << (irq - 32));
 }
 
 static void pxa_unmask_high_irq(unsigned int irq)
 {
-	ICMR2 |= (1 << (irq - 32 + PXA_IRQ_SKIP));
+	ICMR2 |= (1 << (irq - 32));
 }
 
 static struct irq_chip pxa_internal_chip_high = {
@@ -351,7 +351,7 @@ void __init pxa_init_irq(void)
 	/* GPIO 0 and 1 must have their mask bit always set */
 	GPIO_IRQ_mask[0] = 3;
 
-	for (irq = PXA_IRQ(PXA_IRQ_SKIP); irq <= PXA_IRQ(31); irq++) {
+	for (irq = PXA_IRQ(0); irq <= PXA_IRQ(31); irq++) {
 		set_irq_chip(irq, &pxa_internal_chip_low);
 		set_irq_handler(irq, handle_level_irq);
 		set_irq_flags(irq, IRQF_VALID);

include/asm-arm/arch-pxa/entry-macro.S

@@ -34,6 +34,6 @@
 		rsb	\irqstat, \irqnr, #0
 		and	\irqstat, \irqstat, \irqnr
 		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #(31 - PXA_IRQ_SKIP)
+		rsb	\irqnr, \irqnr, #31
 1001:
 		.endm

include/asm-arm/arch-pxa/irqs.h

@@ -11,14 +11,9 @@
  */
 
 
+#define PXA_IRQ(x)	(x)
+
 #ifdef CONFIG_PXA27x
-#define PXA_IRQ_SKIP	0
-#else
-#define PXA_IRQ_SKIP	7
-#endif
-
-#define PXA_IRQ(x)	((x) - PXA_IRQ_SKIP)
-
 #define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
 #define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
 #define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI) */
@@ -26,6 +21,8 @@
 #define IRQ_KEYPAD	PXA_IRQ(4)	/* Key pad controller */
 #define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt */
 #define IRQ_PWRI2C	PXA_IRQ(6)	/* Power I2C interrupt */
+#endif
+
 #define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error (PXA26x) */
 #define IRQ_OST_4_11	PXA_IRQ(7)	/* OS timer 4-11 matches (PXA27x) */
 #define	IRQ_GPIO0	PXA_IRQ(8)	/* GPIO0 Edge Detect */