microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions 

Replace omap_cfg_reg() with new style signal or gpio functions

Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tony Lindgren 2009-12-11 16:16:32 -08:00
Родитель b63128e812
Коммит 4896e3940a
11 изменённых файлов: 177 добавлений и 102 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

4
arch/arm/mach-omap2/board-3430sdp.c
Просмотреть файл

@ -626,7 +626,9 @@ static inline void board_smc91x_init(void)
static void enable_board_wakeup_source(void)
{
omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
/* T2 interrupt line (keypad) */
omap_mux_init_signal("sys_nirq",
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {

5
arch/arm/mach-omap2/board-3630sdp.c
Просмотреть файл

@ -23,6 +23,7 @@
#include <mach/board-zoom.h>
#include "mux.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
@ -48,7 +49,9 @@ static inline void board_smc91x_init(void)
static void enable_board_wakeup_source(void)
{
omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
/* T2 interrupt line (keypad) */
omap_mux_init_signal("sys_nirq",
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {

3
arch/arm/mach-omap2/board-cm-t35.c
Просмотреть файл

@ -503,7 +503,8 @@ static void __init cm_t35_init(void)
usb_musb_init();
omap_cfg_reg(AF26_34XX_SYS_NIRQ);
omap_mux_init_signal("sys_nirq",
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
MACHINE_START(CM_T35, "Compulab CM-T35")

10
arch/arm/mach-omap2/board-omap3beagle.c
Просмотреть файл

@ -141,10 +141,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
if (system_rev >= 0x20 && system_rev <= 0x34301000) {
omap_cfg_reg(AG9_34XX_GPIO23);
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
mmc[0].gpio_wp = 23;
} else {
omap_cfg_reg(AH8_34XX_GPIO29);
omap_mux_init_gpio(29, OMAP_PIN_INPUT);
}
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
@ -439,7 +439,7 @@ static void __init omap3_beagle_init(void)
ARRAY_SIZE(omap3_beagle_devices));
omap_serial_init();
omap_cfg_reg(J25_34XX_GPIO170);
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
gpio_request(170, "DVI_nPD");
/* REVISIT leave DVI powered down until it's needed ... */
gpio_direction_output(170, true);
@ -449,8 +449,8 @@ static void __init omap3_beagle_init(void)
omap3beagle_flash_init();
/* Ensure SDRC pins are mux'd for self-refresh */
omap_cfg_reg(H16_34XX_SDRC_CKE0);
omap_cfg_reg(H17_34XX_SDRC_CKE1);
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init omap3_beagle_map_io(void)

10
arch/arm/mach-omap2/board-omap3evm.c
Просмотреть файл

@ -224,7 +224,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
omap_cfg_reg(L8_34XX_GPIO63);
omap_mux_init_gpio(63, OMAP_PIN_INPUT);
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
@ -450,24 +450,24 @@ static void __init omap3_evm_init(void)
#endif
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
/* enable EHCI VBUS using GPIO22 */
omap_cfg_reg(AF9_34XX_GPIO22);
omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS");
gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0);
gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1);
/* Select EHCI port on main board */
omap_cfg_reg(U3_34XX_GPIO61);
omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP);
gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port");
gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0);
gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0);
/* setup EHCI phy reset config */
omap_cfg_reg(AH14_34XX_GPIO21);
omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
ehci_pdata.reset_gpio_port[1] = 21;
} else {
/* setup EHCI phy reset on MDC */
omap_cfg_reg(AF4_34XX_GPIO135_OUT);
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
ehci_pdata.reset_gpio_port[1] = 135;
}
usb_musb_init();

4
arch/arm/mach-omap2/board-omap3pandora.c
Просмотреть файл

@ -433,8 +433,8 @@ static void __init omap3pandora_init(void)
usb_musb_init();
/* Ensure SDRC pins are mux'd for self-refresh */
omap_cfg_reg(H16_34XX_SDRC_CKE0);
omap_cfg_reg(H17_34XX_SDRC_CKE1);
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init omap3pandora_map_io(void)

4
arch/arm/mach-omap2/board-overo.c
Просмотреть файл

@ -427,8 +427,8 @@ static void __init overo_init(void)
overo_init_smsc911x();
/* Ensure SDRC pins are mux'd for self-refresh */
omap_cfg_reg(H16_34XX_SDRC_CKE0);
omap_cfg_reg(H17_34XX_SDRC_CKE1);
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
if ((gpio_request(OVERO_GPIO_W2W_NRESET,
"OVERO_GPIO_W2W_NRESET") == 0) &&

7
arch/arm/mach-omap2/board-rx51-peripherals.c
Просмотреть файл

@ -33,6 +33,7 @@
#include <plat/onenand.h>
#include <plat/gpmc-smc91x.h>
#include "mux.h"
#include "mmc-twl4030.h"
#define SYSTEM_REV_B_USES_VAUX3 0x1699
@ -630,9 +631,9 @@ static struct omap_smc91x_platform_data board_smc91x_data = {
static void __init board_smc91x_init(void)
{
omap_cfg_reg(U8_34XX_GPIO54_DOWN);
omap_cfg_reg(G25_34XX_GPIO86_OUT);
omap_cfg_reg(H19_34XX_GPIO164_OUT);
omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_gpio(86, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(164, OMAP_PIN_OUTPUT);
gpmc_smc91x_init(&board_smc91x_data);
}

4
arch/arm/mach-omap2/board-rx51.c
Просмотреть файл

@ -87,8 +87,8 @@ static void __init rx51_init(void)
rx51_peripherals_init();
/* Ensure SDRC pins are mux'd for self-refresh */
omap_cfg_reg(H16_34XX_SDRC_CKE0);
omap_cfg_reg(H17_34XX_SDRC_CKE1);
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init rx51_map_io(void)

62
arch/arm/mach-omap2/devices.c
Просмотреть файл

@ -27,6 +27,8 @@
#include <mach/gpio.h>
#include <plat/mmc.h>
#include "mux.h"
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
static struct resource cam_resources[] = {
@ -595,27 +597,40 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
if (cpu_is_omap34xx()) {
if (controller_nr == 0) {
omap_cfg_reg(N28_3430_MMC1_CLK);
omap_cfg_reg(M27_3430_MMC1_CMD);
omap_cfg_reg(N27_3430_MMC1_DAT0);
omap_mux_init_signal("sdmmc1_clk",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_cmd",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat0",
OMAP_PIN_INPUT_PULLUP);
if (mmc_controller->slots[0].wires == 4 ||
mmc_controller->slots[0].wires == 8) {
omap_cfg_reg(N26_3430_MMC1_DAT1);
omap_cfg_reg(N25_3430_MMC1_DAT2);
omap_cfg_reg(P28_3430_MMC1_DAT3);
omap_mux_init_signal("sdmmc1_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat2",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat3",
OMAP_PIN_INPUT_PULLUP);
}
if (mmc_controller->slots[0].wires == 8) {
omap_cfg_reg(P27_3430_MMC1_DAT4);
omap_cfg_reg(P26_3430_MMC1_DAT5);
omap_cfg_reg(R27_3430_MMC1_DAT6);
omap_cfg_reg(R25_3430_MMC1_DAT7);
omap_mux_init_signal("sdmmc1_dat4",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat5",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat6",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat7",
OMAP_PIN_INPUT_PULLUP);
}
}
if (controller_nr == 1) {
/* MMC2 */
omap_cfg_reg(AE2_3430_MMC2_CLK);
omap_cfg_reg(AG5_3430_MMC2_CMD);
omap_cfg_reg(AH5_3430_MMC2_DAT0);
omap_mux_init_signal("sdmmc2_clk",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_cmd",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat0",
OMAP_PIN_INPUT_PULLUP);
/*
* For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
@ -623,15 +638,22 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
*/
if (mmc_controller->slots[0].wires == 4 ||
mmc_controller->slots[0].wires == 8) {
omap_cfg_reg(AH4_3430_MMC2_DAT1);
omap_cfg_reg(AG4_3430_MMC2_DAT2);
omap_cfg_reg(AF4_3430_MMC2_DAT3);
omap_mux_init_signal("sdmmc2_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat2",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat3",
OMAP_PIN_INPUT_PULLUP);
}
if (mmc_controller->slots[0].wires == 8) {
omap_cfg_reg(AE4_3430_MMC2_DAT4);
omap_cfg_reg(AH3_3430_MMC2_DAT5);
omap_cfg_reg(AF3_3430_MMC2_DAT6);
omap_cfg_reg(AE3_3430_MMC2_DAT7);
omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7",
OMAP_PIN_INPUT_PULLUP);
}
}

166
arch/arm/mach-omap2/usb-ehci.c
Просмотреть файл

@ -27,6 +27,8 @@
#include <mach/irqs.h>
#include <plat/usb.h>
#include "mux.h"
#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
static struct resource ehci_resources[] = {
@ -72,32 +74,44 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
{
switch (port_mode[0]) {
case EHCI_HCD_OMAP_MODE_PHY:
omap_cfg_reg(Y9_3430_USB1HS_PHY_STP);
omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK);
omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR);
omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT);
omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0);
omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1);
omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2);
omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3);
omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4);
omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5);
omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6);
omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7);
omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
break;
case EHCI_HCD_OMAP_MODE_TLL:
omap_cfg_reg(Y9_3430_USB1HS_TLL_STP);
omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK);
omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR);
omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT);
omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0);
omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1);
omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2);
omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3);
omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4);
omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5);
omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6);
omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7);
omap_mux_init_signal("hsusb1_tll_stp",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hsusb1_tll_clk",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_tll_dir",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_tll_nxt",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_tll_data0",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_tll_data1",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_tll_data2",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_tll_data3",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_tll_data4",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_tll_data5",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_tll_data6",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb1_tll_data7",
OMAP_PIN_INPUT_PULLDOWN);
break;
case EHCI_HCD_OMAP_MODE_UNKNOWN:
/* FALLTHROUGH */
@ -107,32 +121,52 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
switch (port_mode[1]) {
case EHCI_HCD_OMAP_MODE_PHY:
omap_cfg_reg(AA10_3430_USB2HS_PHY_STP);
omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK);
omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR);
omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT);
omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0);
omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1);
omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2);
omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3);
omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4);
omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5);
omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6);
omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7);
omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_data0",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_data1",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_data2",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_data3",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_data4",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_data5",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_data6",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_data7",
OMAP_PIN_INPUT_PULLDOWN);
break;
case EHCI_HCD_OMAP_MODE_TLL:
omap_cfg_reg(AA10_3430_USB2HS_TLL_STP);
omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK);
omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR);
omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT);
omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0);
omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1);
omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2);
omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3);
omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4);
omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5);
omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6);
omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7);
omap_mux_init_signal("hsusb2_tll_stp",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hsusb2_tll_clk",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_tll_dir",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_tll_nxt",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_tll_data0",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_tll_data1",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_tll_data2",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_tll_data3",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_tll_data4",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_tll_data5",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_tll_data6",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb2_tll_data7",
OMAP_PIN_INPUT_PULLDOWN);
break;
case EHCI_HCD_OMAP_MODE_UNKNOWN:
/* FALLTHROUGH */
@ -145,18 +179,30 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
break;
case EHCI_HCD_OMAP_MODE_TLL:
omap_cfg_reg(AB3_3430_USB3HS_TLL_STP);
omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK);
omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR);
omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT);
omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0);
omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1);
omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2);
omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3);
omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4);
omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5);
omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6);
omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7);
omap_mux_init_signal("hsusb3_tll_stp",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hsusb3_tll_clk",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb3_tll_dir",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb3_tll_nxt",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb3_tll_data0",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb3_tll_data1",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb3_tll_data2",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb3_tll_data3",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb3_tll_data4",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb3_tll_data5",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb3_tll_data6",
OMAP_PIN_INPUT_PULLDOWN);
omap_mux_init_signal("hsusb3_tll_data7",
OMAP_PIN_INPUT_PULLDOWN);
break;
case EHCI_HCD_OMAP_MODE_UNKNOWN:
/* FALLTHROUGH */